; --------------------------------------------------------------------------------
; @Title: RZN2L On-Chip Peripherals
; @Props: Released
; @Author: NEJ, KRZ
; @Changelog: 2022-06-21 NEJ
;             2022-07-06 KRZ
;             2022-08-10 KRZ
; @Manufacturer: RENESAS - Renesas Technology, Corp.
; @Doc: SVD generated (SVD2PER 1.8.6), based on: R9A07G084_rev110.svd (Ver. 1.10)
; @Core: Cortex-R52
; @Chip: RZN2L
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: perrzn2l.per 15106 2022-08-10 11:27:15Z kwisniewski $

tree "Core Registers (Cortex-R52)"
AUTOINDENT.PUSH
AUTOINDENT.ON center tree
tree "ID Registers"
rgroup.long c15:0x0010++0x00
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
bitfld.long 0x00 12.--15. "STATE3,Thumb execution environment (thumb-EE) support" "Not supported,?..."
bitfld.long 0x00 8.--11. "STATE2,Support for jazelle extension" "Reserved,No cleaning,?..."
bitfld.long 0x00 4.--7. "STATE1,Thumb encoding supported by the processor type" "Reserved,Reserved,Reserved,After thumb-2,?..."
newline
bitfld.long 0x00 0.--3. "STATE0,ARM instruction set support" "Reserved,Supported,?..."
rgroup.long c15:0x0110++0x00
line.long 0x00 "ID_PFR1,Processor Feature Register 1"
bitfld.long 0x00 28.--31. "GIC_CPU,GIC CPU support" "Reserved,Enabled,?..."
bitfld.long 0x00 24.--27. "VF,Virtualization fractional support" "Not supported,?..."
bitfld.long 0x00 20.--23. "SF,Security fractional support" "Reserved,VBAR,?..."
newline
bitfld.long 0x00 16.--19. "GT,Generic timer support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "VE,Virtualization extensions support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "MPM,Microcontroller programmer's model support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "SE,Security extensions architecture v1 support" "Not supported,?..."
bitfld.long 0x00 0.--3. "PM,Standard ARMv4 programmer's model support" "Reserved,Supported,?..."
rgroup.long c15:0x0310++0x00
line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
rgroup.long c15:0x0410++0x00
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
bitfld.long 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Non-cacheable,?..."
bitfld.long 0x00 24.--27. "FCSE,Fast context switch memory mappings support" "Not supported,?..."
bitfld.long 0x00 20.--23. "AR,Auxiliary register support" "Reserved,Reserved,Control/fault status,?..."
newline
bitfld.long 0x00 16.--19. "TCM,TCM and associated DMA support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..."
bitfld.long 0x00 8.--11. "OSS,Outer shareable support" "Non-cacheable,?..."
newline
bitfld.long 0x00 4.--7. "PMSA,Physical memory system architecture (PMSA) support" "Reserved,Reserved,Reserved,Reserved,ARMv8-R base+limit PMSA,?..."
bitfld.long 0x00 0.--3. "VMSA,Virtual memory system architecture (VMSA) support" "Not supported,?..."
rgroup.long c15:0x0510++0x00
line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
bitfld.long 0x00 28.--31. "BTB,Branch predictor" "Reserved,Reserved,Reserved,Reserved,No flushing,?..."
bitfld.long 0x00 24.--27. "L1TCO,Test and clean operations on data cache/harvard/unified architecture support" "Not supported,?..."
bitfld.long 0x00 20.--23. "L1UCMO,L1 cache/all maintenance operations/unified architecture support" "Not supported,?..."
newline
bitfld.long 0x00 16.--19. "L1HCMO,L1 Cache/all maintenance operations/harvard architecture support" "Not supported,?..."
bitfld.long 0x00 12.--15. "L1UCLMOSW,L1 cache line maintenance operations by set and way/unified architecture support" "Not supported,?..."
bitfld.long 0x00 8.--11. "L1HCLMOSW,L1 cache line maintenance operations by set and way/harvard architecture support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "L1UCLMOMVA,L1 cache line maintenance operations by MVA/unified architecture support" "Not supported,?..."
bitfld.long 0x00 0.--3. "L1HCLMOMVA,L1 cache line maintenance operations by MVA/harvard architecture" "Not supported,?..."
rgroup.long c15:0x0610++0x00
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
bitfld.long 0x00 28.--31. "HAF,Hardware access flag support" "Not supported,?..."
bitfld.long 0x00 24.--27. "WFI,Wait for interrupt stalling support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MBF,Memory barrier operations support" "Reserved,Reserved,DSB/ISB/DMB,?..."
newline
bitfld.long 0x00 16.--19. "UTLBMO,TLB maintenance operations/unified architecture support" "Not supported,?..."
bitfld.long 0x00 12.--15. "HTLBMO,TLB maintenance operations/harvard architecture support" "Not supported,?..."
bitfld.long 0x00 8.--11. "HL1CMRO,Cache maintenance range operations/harvard architecture support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "HL1BPCRO,Background prefetch cache range operations/harvard architecture support" "Not supported,?..."
bitfld.long 0x00 0.--3. "HL1FPCRO,Foreground prefetch cache range operations/harvard architecture support" "Not supported,?..."
rgroup.long c15:0x0710++0x00
line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3"
bitfld.long 0x00 28.--31. "SS,Supersection support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not supported"
bitfld.long 0x00 24.--27. "CMEMSZ,Cached memory size" "4GByte,?..."
bitfld.long 0x00 20.--23. "CW,Coherent walk. Indicates whether translation table updates require a clean to the point of unification" "Reserved,Not required,?..."
newline
bitfld.long 0x00 12.--15. "MB,Maintenance broadcast support" "Reserved,Reserved,Shareability/defined behavior,?..."
bitfld.long 0x00 8.--11. "BPM,Invalidate branch predictor support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "HCMOSW,Invalidate cache by set and way/clean by set and way/invalidate and clean by set and way support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "HCMOMVA,Invalidate cache MVA support" "Reserved,Supported,?..."
rgroup.long c15:0x0620++0x00
line.long 0x00 "ID_MMFR4,Memory Model Feature Register 4"
bitfld.long 0x00 4.--7. "AC2,Extension of ACTLR and HACTLR by ACTLR2 and HACTLR2" "Reserved,Supported,?..."
rgroup.long c15:0x0020++0x00
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
bitfld.long 0x00 24.--27. "DIVI,Divide instructions support" "Reserved,Reserved,T32/A32,?..."
bitfld.long 0x00 20.--23. "DEBI,Debug instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 16.--19. "CI,Coprocessor instructions support" "Not supported,?..."
newline
bitfld.long 0x00 12.--15. "CBI,Combined compare and branch instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BI,Bitfield instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "BCI,Bit counting instructions support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "SI,Swap instructions support" "Not supported,?..."
rgroup.long c15:0x0120++0x00
line.long 0x00 "ID_ISAR1,Instruction Set Attributes Register 1"
bitfld.long 0x00 28.--31. "JI,Jazelle instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "INTI,Interwork instructions support" "Reserved,Reserved,Reserved,A32-BX like,?..."
bitfld.long 0x00 20.--23. "IMMI,Immediate instructions support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "ITEI,If then instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "EXTI,Extend instructions support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "EARI,Exception A and R instructions support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "EXIN,Exception in ARM instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "ENDI,Endian instructions support" "Reserved,Supported,?..."
rgroup.long c15:0x0220++0x00
line.long 0x00 "ID_ISAR2,Instruction Set Attributes Register 2"
bitfld.long 0x00 28.--31. "RI,Reversal instructions support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "PSRI,PSR instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "UMI,Advanced unsigned multiply instructions support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "SMI,Advanced signed multiply instructions support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "MI,Multiply instructions support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "II,Multi-access interruptible instructions support" "Reserved,Restartable,?..."
newline
bitfld.long 0x00 4.--7. "MHI,Memory hint instructions support" "Reserved,Reserved,Reserved,Reserved,PLD/PLI/PLDW,?..."
bitfld.long 0x00 0.--3. "LSI,Load and store instructions support" "Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0320++0x00
line.long 0x00 "ID_ISAR3,Instruction Set Attributes Register 3"
bitfld.long 0x00 28.--31. "TEEEI,Thumb-EE extensions support" "Not supported,?..."
bitfld.long 0x00 24.--27. "NOPI,True NOP instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "TCI,Thumb copy instructions support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "TBI,Table branch instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SPI,Synchronization primitive instructions support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "SVCI,SVC instructions support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "SIMDI,Single instruction multiple data (SIMD) instructions support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SI,Saturate instructions support" "Reserved,Supported,?..."
rgroup.long c15:0x0420++0x00
line.long 0x00 "ID_ISAR4,Instruction Set Attributes Register 4"
bitfld.long 0x00 28.--31. "SWP_FRAC,Memory system locking support" "Not supported,?..."
bitfld.long 0x00 24.--27. "PSR_M_I,PSR_M instructions support" "Not supported,?..."
bitfld.long 0x00 20.--23. "SPRI,Synchronization primitive instructions" "Supported,?..."
newline
bitfld.long 0x00 16.--19. "BI,Barrier instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SMCI,SMC instructions support" "Not supported,?..."
bitfld.long 0x00 8.--11. "WBI,Write-back instructions support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "WSI,With-shift instructions support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "UI,Unprivileged instructions support" "Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0520++0x00
line.long 0x00 "ID_ISAR5,Instruction Set Attribute Register 5"
bitfld.long 0x00 16.--19. "CRC32,CRC32 instructions support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SHA2,SHA2 instructions support" "Not supported,?..."
bitfld.long 0x00 8.--11. "SHA1,SHA1 instructions support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "AES,AES instructions support" "Not supported,?..."
bitfld.long 0x00 0.--3. "SEVL,SEVL instructions support" "Reserved,Supported,?..."
rgroup.long c15:0x0210++0x00
line.long 0x00 "ID_DFR0,Debug Feature Register 0"
bitfld.long 0x00 24.--27. "PMM,Performance monitor model support" "Reserved,Reserved,Reserved,PMUv3,?..."
bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped debug model for M profile processors support" "Not supported,?..."
bitfld.long 0x00 16.--19. "TM_MM,Trace model (memory-mapped) support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-based trace debug model support" "Not supported,?..."
bitfld.long 0x00 0.--3. "CDM_CB,Secure debug model (Coprocessor) support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0000++0x00
line.long 0x00 "MIDR,Main ID Register"
hexmask.long.byte 0x00 24.--31. 1. "IMPL,Implementer code"
bitfld.long 0x00 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "ARCH,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CPUID scheme"
hexmask.long.word 0x00 4.--15. 1. "PART,Primary part number"
newline
bitfld.long 0x00 0.--3. "REV,Revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long c15:0x0700++0x00
line.long 0x00 "MIDR,Main ID Register (Alias)"
hexmask.long.byte 0x00 24.--31. 1. "IMPL,Implementer code"
bitfld.long 0x00 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "ARCH,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CPUID scheme"
hexmask.long.word 0x00 4.--15. 1. "PART,Primary part number"
newline
bitfld.long 0x00 0.--3. "REV,Revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long c15:0x0200++0x00
line.long 0x00 "TCMTR,TCM Type Register"
bitfld.long 0x00 29.--31. "TCMS,TCM implemented" "No TCMs,Reserved,Reserved,Reserved,1 TCMs,?..."
bitfld.long 0x00 2. "CTCM,CTCM implemented with non zero size" "Not implemented,Implemented"
bitfld.long 0x00 1. "BTCM,BTCM implemented with non zero size" "Not implemented,Implemented"
newline
bitfld.long 0x00 0. "ATCM,ATCM implemented with non zero size" "Not implemented,Implemented"
rgroup.long c15:0x0300++0x00
line.long 0x00 "TLBTR,TLB Type Register"
rgroup.long c15:0x0500++0x00
line.long 0x00 "MPIDR,Multiprocessor Affinity Register"
bitfld.long 0x00 30. "U,Single core system as distinct from core 0 in a cluster" "Part of a cluster,?..."
bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..."
newline
hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. The least significant affinity field for this PE in the system"
hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. The intermediate affinity level field for this PE in the system"
hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. The most significant affinity level field for this PE in the system"
rgroup.long c15:0x0600++0x00
line.long 0x00 "REVIDR,Revision ID Register"
hexmask.long.word 0x00 0.--11. 1. "IDNUMBER,Implementation-specific revision information"
rgroup.long c15:0x1700++0x00
line.long 0x00 "AIDR,Auxiliary ID Register"
tree.end
tree "System Control and Configuration"
group.long c15:0x0001++0x00
line.long 0x00 "SCTLR,System Control Register"
bitfld.long 0x00 30. "TE,Thumb exception enable" "A32,T32"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
rbitfld.long 0x00 21. "FI,Fast interrupts configuration enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies EL1 Execute Never (XN)" "Not forced,Forced"
bitfld.long 0x00 19. "WXN,Write permission implies Execute Never (XN)" "Not forced,Forced"
newline
bitfld.long 0x00 18. "NTWE,Do not trap WFE (Wait for Event) instruction" "Trapped,Not trapped"
bitfld.long 0x00 17. "BR,Background region enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "NTWI,Do not trap WFI (Wait For Interrupt) instruction" "Trapped,Not trapped"
bitfld.long 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND instruction disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT instruction disable" "No,Yes"
bitfld.long 0x00 5. "CP15BEN,CP15* barrier operations enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "C,Data/Unified cache enable" "Disabled,Enabled"
bitfld.long 0x00 1. "A,Alignment fault checking enable" "Disabled,Enabled"
bitfld.long 0x00 0. "M,EL1-controlled MPU enable" "Disabled,Enabled"
group.long c15:0x0201++0x00
line.long 0x00 "CPACR,Architectural Feature Access Control Register"
bitfld.long 0x00 31. "ASEDIS,Disable advanced SIMD extension functionality" "No,Yes"
bitfld.long 0x00 22.--23. "CP11,Coprocessor access control" "Denied,Privileged,Reserved,Full"
bitfld.long 0x00 20.--21. "CP10,Coprocessor access control" "Denied,Privileged,Reserved,Full"
rgroup.long c15:0x0101++0x00
line.long 0x00 "ACTLR,Auxiliary Control Register"
rgroup.long c15:0x0301++0x00
line.long 0x00 "ACTLR2,Auxiliary Control Register 2"
rgroup.long c15:0x0211++0x00
line.long 0x00 "NSACR,Non-Secure Access Control Register"
group.long c15:0x000B++0x00
line.long 0x00 "IMP_SLAVEPCTLR,Slave Port Control Register"
bitfld.long 0x00 0.--1. "TCMACCLVL,Indicates the privilege level required for the AXIS to access the TCM" "Denied,Privileged,Reserved,Full"
group.long c15:0x000C++0x00
line.long 0x00 "VBAR,Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "VBA,Vector base address"
rgroup.long c15:0x010C++0x00
line.long 0x00 "RVBAR,Reset Vector Base Address Register"
hexmask.long 0x00 1.--31. 0x02 "ADDR,Reset address"
rgroup.long c15:0x001C++0x00
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 8. "A,External abort pending flag" "Not pending,Pending"
bitfld.long 0x00 7. "I,Interrupt pending flag" "Not pending,Pending"
bitfld.long 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending"
group.long c15:0x0015++0x00
line.long 0x00 "ADFSR,Auxiliary Data Fault Status Register"
bitfld.long 0x00 2.--4. "PORT,Memory or port that caused the fault" "AXIM,Flash interface,LLPP,Internal interface,ATCM,BTCM,CTCM,Overlap"
bitfld.long 0x00 0.--1. "TYPE,Fault type" "Other error,External bus control,TCM/cache/bus data,Bus timeout"
group.long c15:0x0115++0x00
line.long 0x00 "AIFSR,Auxiliary Instruction Fault Status Register"
bitfld.long 0x00 2.--4. "PORT,Memory or port that caused the fault" "AXIM,Flash interface,LLPP,Reserved,ATCM,BTCM,CTCM,Overlap"
bitfld.long 0x00 0.--1. "TYPE,Fault type" "Other error,External bus control,TCM/cache/bus data,Bus timeout"
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 13. "CM,Cache maintenance fault" "No fault,Fault"
bitfld.long 0x00 12. "EXT,External abort qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 11. "WNR,Access caused an abort type" "Read,Write"
bitfld.long 0x00 0.--5. "STATUS,Fault status bits" "Reserved,Reserved,Reserved,Reserved,Translation fault/0th level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault/0th level,Reserved,Reserved,Reserved,Synchronous external abort,Asynchronous external abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synchronous parity error on memory access,Asynchronous parity error on memory access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,LDREX or STREX,?..."
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 16. "FNV,FAR not Valid for a Synchronous External abort" "Valid,?..."
bitfld.long 0x00 12. "EXT,External abort qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 9. "LPAE,Translation table formats on Data Abort exception" "Reserved,Long-descriptor"
bitfld.long 0x00 0.--5. "STATUS,Fault status bits" "Reserved,Reserved,Reserved,Reserved,Translation fault/0th level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault/0th level,Reserved,Reserved,Reserved,Synchronous external abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synchronous parity error on memory access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug event,?..."
group.long c15:0x0006++0x00
line.long 0x00 "DFAR,Data Fault Address Register"
group.long c15:0x0206++0x00
line.long 0x00 "IFAR,Instruction Fault Address Register"
rgroup.long c15:0x000D++0x00
line.long 0x00 "FCSEIDR,FCSE PID Register"
rgroup.long c15:0x103F++0x00
line.long 0x00 "IMP_CBAR,Configuration Base Address Register"
hexmask.long.word 0x00 21.--31. 0x20 "PERIPHBASE,Upper bits of base physical address of memory-mapped peripherals"
group.long c15:0x020D++0x00
line.long 0x00 "TPIDRURW,Thread Pointer ID Register Unprivileged Read-Write"
group.long c15:0x030D++0x00
line.long 0x00 "TPIDRURO,Thread Pointer ID Register Unprivileged Read-Only"
group.long c15:0x040D++0x00
line.long 0x00 "TPIDRPRW,Thread Pointer ID Register Privileged Read-Write"
tree "System Instructions"
wgroup.long c15:0x0017++0x00
line.long 0x00 "ICIALLUIS,ICIALLUIS"
wgroup.long c15:0x0617++0x00
line.long 0x00 "BPIALLIS,BPIALLIS"
wgroup.long c15:0x0057++0x00
line.long 0x00 "ICIALLU,ICIALLU"
wgroup.long c15:0x0157++0x00
line.long 0x00 "ICIMVAU,ICIMVAU"
wgroup.long c15:0x0457++0x00
line.long 0x00 "CP15ISB,CP15ISB"
wgroup.long c15:0x0657++0x00
line.long 0x00 "BPIALL,BPIALL"
wgroup.long c15:0x0757++0x00
line.long 0x00 "BPIMVA,BPIMVA"
wgroup.long c15:0x0167++0x00
line.long 0x00 "DCIMVAC,DCIMVAC"
wgroup.long c15:0x0267++0x00
line.long 0x00 "DCISW,DCISW"
wgroup.long c15:0x0087++0x00
line.long 0x00 "ATS1CPR,ATS1CPR"
wgroup.long c15:0x0187++0x00
line.long 0x00 "ATS1CPW,ATS1CPW"
wgroup.long c15:0x0287++0x00
line.long 0x00 "ATS1CUR,ATS1CUR"
wgroup.long c15:0x0387++0x00
line.long 0x00 "ATS1CUW,ATS1CUW"
wgroup.long c15:0x0487++0x00
line.long 0x00 "ATS12NSOPR,ATS12NSOPR"
wgroup.long c15:0x0587++0x00
line.long 0x00 "ATS12NSOPW,ATS12NSOPW"
wgroup.long c15:0x0687++0x00
line.long 0x00 "ATS12NSOUR,ATS12NSOUR"
wgroup.long c15:0x0787++0x00
line.long 0x00 "ATS12NSOUW,ATS12NSOUW"
wgroup.long c15:0x01A7++0x00
line.long 0x00 "DCCMVAC,DCCMVAC"
wgroup.long c15:0x02A7++0x00
line.long 0x00 "DCCSW,DCCSW"
wgroup.long c15:0x04A7++0x00
line.long 0x00 "CP15DSB,CP15DSB"
wgroup.long c15:0x05A7++0x00
line.long 0x00 "CP15DMB,CP15DMB"
wgroup.long c15:0x01B7++0x00
line.long 0x00 "DCCMVAU,DCCMVAU"
wgroup.long c15:0x01E7++0x00
line.long 0x00 "DCCIMVAC,DCCIMVAC"
wgroup.long c15:0x02E7++0x00
line.long 0x00 "DCCISW,DCCISW"
wgroup.long c15:0x4087++0x00
line.long 0x00 "ATS1HR,ATS1HR"
wgroup.long c15:0x4187++0x00
line.long 0x00 "ATS1HW,ATS1HW"
tree.end
tree.end
tree "MPU Control and Configuration"
group.long c15:0x0001++0x00
line.long 0x00 "SCTLR,System Control Register"
bitfld.long 0x00 30. "TE,Thumb exception enable" "A32,T32"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
rbitfld.long 0x00 21. "FI,Fast interrupts configuration enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies EL1 Execute Never (XN)" "Not forced,Forced"
bitfld.long 0x00 19. "WXN,Write permission implies Execute Never (XN)" "Not forced,Forced"
newline
bitfld.long 0x00 18. "NTWE,Do not trap WFE (Wait for Event) instruction" "Trapped,Not trapped"
bitfld.long 0x00 17. "BR,Background region enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "NTWI,Do not trap WFI (Wait For Interrupt) instruction" "Trapped,Not trapped"
bitfld.long 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND instruction disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT instruction disable" "No,Yes"
bitfld.long 0x00 5. "CP15BEN,CP15* barrier operations enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "C,Data/Unified cache enable" "Disabled,Enabled"
bitfld.long 0x00 1. "A,Alignment fault checking enable" "Disabled,Enabled"
bitfld.long 0x00 0. "M,EL1-controlled MPU enable" "Disabled,Enabled"
if (((per.l(c15:0x10070))&0x1)==0x0)
group.quad c15:0x10070++0x01
line.quad 0x00 "PAR,Physical Address Register"
hexmask.quad.byte 0x00 56.--63. 1. "ATTR,Memory attributes for the returned PA"
hexmask.quad.long 0x00 12.--31. 0x1000 "PA,Physical address"
newline
bitfld.quad 0x00 9. "NS,Non-secure" "Reserved,Yes"
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
else
group.quad c15:0x10070++0x01
line.quad 0x00 "PAR,Physical Address Register"
bitfld.quad 0x00 9. "FSTAGE,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2"
bitfld.quad 0x00 8. "S2WLK,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,?..."
newline
bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Reserved,Reserved,Reserved,Reserved,Translation fault/0th level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault/0th level,Reserved,Reserved,Reserved,Synchronous external abort,Asynchronous external abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synchronous parity error on memory access,Asynchronous parity error on memory access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Unsupported Exclusive access,?..."
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
endif
tree.open "Memory Attribute Indirection Registers"
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
rgroup.long c15:0x003A++0x00
line.long 0x00 "AMAIR0,Auxiliary Memory Attribute Indirection Register 0"
rgroup.long c15:0x013A++0x00
line.long 0x00 "AMAIR1,Auxiliary Memory Attribute Indirection Register 1"
rgroup.long c15:0x403A++0x00
line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0"
rgroup.long c15:0x413A++0x00
line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1"
group.long c15:0x010D++0x00
line.long 0x00 "CONTEXTIDR,Context ID Register"
tree.end
newline
group.long c15:(0x0019+0x0)++0x00
line.long 0x00 "IMP_ATCMREGIONR,TCM Region Register A"
hexmask.long.long 0x00 13.--31. 0x2000 "BASEADDRESS,TCM base address"
bitfld.long 0x00 8. "WAITSTATES,Wait states for TCM accesses" "0,1"
newline
bitfld.long 0x00 2.--6. "SIZE,TCM size" "No TCM,Reserved,Reserved,Reserved,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,?..."
bitfld.long 0x00 1. "ENABLEEL2,Enable TCM at EL2" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "ENABLEEL10,Enable TCM at EL1 and EL0" "Disabled,Enabled"
group.long c15:(0x0019+0x100)++0x00
line.long 0x00 "IMP_BTCMREGIONR,TCM Region Register B"
hexmask.long.long 0x00 13.--31. 0x2000 "BASEADDRESS,TCM base address"
bitfld.long 0x00 8. "WAITSTATES,Wait states for TCM accesses" "0,1"
newline
bitfld.long 0x00 2.--6. "SIZE,TCM size" "No TCM,Reserved,Reserved,Reserved,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,?..."
bitfld.long 0x00 1. "ENABLEEL2,Enable TCM at EL2" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "ENABLEEL10,Enable TCM at EL1 and EL0" "Disabled,Enabled"
group.long c15:(0x0019+0x200)++0x00
line.long 0x00 "IMP_CTCMREGIONR,TCM Region Register C"
hexmask.long.long 0x00 13.--31. 0x2000 "BASEADDRESS,TCM base address"
bitfld.long 0x00 8. "WAITSTATES,Wait states for TCM accesses" "0,1"
newline
bitfld.long 0x00 2.--6. "SIZE,TCM size" "No TCM,Reserved,Reserved,Reserved,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,?..."
bitfld.long 0x00 1. "ENABLEEL2,Enable TCM at EL2" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "ENABLEEL10,Enable TCM at EL1 and EL0" "Disabled,Enabled"
group.long c15:0x1219++0x00
line.long 0x00 "IMP_MEMPROTCTLR,Memory Protection Control Register"
rbitfld.long 0x00 5. "FLASHPROTIMP,Flash protection implemented" "Not implemented,Implemented"
rbitfld.long 0x00 4. "RAMPROTIMP,RAM protection implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 1. "FLASHPROTEN,Flash interface protection enable" "Disabled,Enabled"
bitfld.long 0x00 0. "RAMPROTEN,TCM and L1 cache RAM protection enable" "Disabled,Enabled"
group.long c15:0x000F++0x00
line.long 0x00 "IMP_PERIPHPREGIONR,Peripheral Port Region Register"
hexmask.long.tbyte 0x00 12.--31. 0x10 "BASEADDRESS,Peripheral port region base address"
bitfld.long 0x00 2.--6. "SIZE,Peripheral port region size" "No peripheral port,Reserved,Reserved,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,?..."
newline
bitfld.long 0x00 1. "ENABLEEL2,Enable peripheral port at EL2" "Disabled,Enabled"
bitfld.long 0x00 0. "ENABLEEL10,Enable peripheral port at EL1 and EL0" "Disabled,Enabled"
group.long c15:0x010F++0x00
line.long 0x00 "IMP_FLASHIFREGIONR,Flash Interface Region Register"
hexmask.long.byte 0x00 27.--31. 0x08 "BASEADDRESS,Peripheral port region base address"
bitfld.long 0x00 2.--6. "SIZE,Flash interface region size" "No flash,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,128 MB,?..."
newline
bitfld.long 0x00 0. "ENABLE,Enable the flash interface" "Disabled,Enabled"
rgroup.long c15:0x002F++0x00
line.long 0x00 "IMP_BUILDOPTR,Build Options Register"
bitfld.long 0x00 30.--31. "LOCK_STEP,DCLS functionality implemented" "Not implemented,DCLS configuration,Split/lock configuration,?..."
bitfld.long 0x00 28.--29. "BUS_PROTECTION,Bus protection scheme implemented (signal integrity/interconnect protection)" "Not implemented,Implemented/Not implemented,Implemented,?..."
newline
bitfld.long 0x00 26.--27. "FLASH_DATA_ECC_SCHEME,Flash memory interface data ECC chunk size" "Reserved,64 bit,128 bit,?..."
bitfld.long 0x00 20.--23. "AXIS_ID_WIDTH,Width of AXIS interface ID signals" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8. "NUM_GIC_EXT_DEV,Number of external device interfaces to the GIC" "0,1"
bitfld.long 0x00 0.--3. "NUM_CORES,Number of cores in the Cortex-R52 processor" "0,1,2,3,?..."
rgroup.long c15:0x072F++0x00
line.long 0x00 "IMP_PINOPTR,Pin Options Register"
hexmask.long.byte 0x00 24.--31. 1. "CFGAXISTCMBASEADDR,Value of the CFGAXISTCMBASEADDR signal"
bitfld.long 0x00 23. "CFGSLSPLIT,Value of the CFGSLSPLIT signal" "0,1"
newline
bitfld.long 0x00 21.--22. "CFGCLUSTERUTID,Value of the CFGCLUSTERUTID signal" "0,1,2,3"
bitfld.long 0x00 18. "CFGFLASHPROTEN,Value of the CFGFLASHPROTEN signal" "0,1"
newline
bitfld.long 0x00 17. "CFGRAMPROTEN,Value of the CFGRAMPROTEN signal" "0,1"
bitfld.long 0x00 16. "CFGINITREG,Value of the CFGINITREG signal" "0,1"
newline
bitfld.long 0x00 15. "CFGMRPEN,Value of the CFGMRPEN signal" "0,1"
bitfld.long 0x00 6. "CFGL1CACHEINVDISX,Value of the CFGL1CACHEINVDISx signal" "0,1"
newline
bitfld.long 0x00 5. "CFGENDIANNESSX,Value of the CFGENDIANNESSX signal" "0,1"
bitfld.long 0x00 4. "CFGTHUMBEXCEPTIONSX,Value of the CFGTHUMBEXCEPTIONSx signal" "0,1"
newline
bitfld.long 0x00 2. "CFGFLASHENX,Value of the CFGFLASHENx signal" "0,1"
bitfld.long 0x00 0. "CFGTCMBOOTX,Value of the CFGTCMBOOTx signal" "0,1"
group.long c15:0x113F++0x00
line.long 0x00 "IMP_QOSR,Quality Of Service Register"
bitfld.long 0x00 8.--11. "AWQOS[3:0],QoS identifier sent on the write address channel for each write transaction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "ARQOS[3:0],QoS identifier sent on the read address channel for each read transaction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long c15:0x123F++0x00
line.long 0x00 "IMP_BUSTIMEOUTR,Bus Timeout Register"
hexmask.long.byte 0x00 24.--31. 1. "MAXCYCLESBY16FLASH,Flash interface timeout value in cycles divided by 16"
hexmask.long.byte 0x00 16.--23. 1. "MAXCYCLESBY16LLPP,LLPP timeout value in cycles divided by 16"
newline
hexmask.long.byte 0x00 8.--15. 1. "MAXCYCLESBY16AXIM,AXIM interface timeout value in cycles divided by 16"
bitfld.long 0x00 6. "ABORTFLASH,Abort flash access" "Not aborted,Aborted"
newline
bitfld.long 0x00 5. "ABORTLLPP,Abort LLPP access" "Not aborted,Aborted"
bitfld.long 0x00 4. "ABORTAXIM,Abort AXIM access" "Not aborted,Aborted"
newline
bitfld.long 0x00 2. "ENABLEFLASH,Timeout counter enable for flash interface" "Disabled,Enabled"
bitfld.long 0x00 1. "ENABLELLPP,Timeout counter enable for LLPP" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "ENABLEAXIM,Timeout counter enable for AXIM interface" "Disabled,Enabled"
group.long c15:0x143F++0x00
line.long 0x00 "IMP_INTMONR,Interrupt Monitoring Register"
hexmask.long.byte 0x00 8.--15. 1. "MAXCYCLESBY16,Maximum count divided by 16"
bitfld.long 0x00 4. "MODE,Operation mode of the counter" "Watchdog,Maximum value monitor"
newline
bitfld.long 0x00 2. "ENABLESER,Enable counting of cycles in which physical system errors are masked" "Disabled,Enabled"
bitfld.long 0x00 1. "ENABLEIRQ,Enable counting of physical interrupts that cannot be taken" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "ENABLEFIQ,Enable counting of fast interrupts that cannot be taken" "Disabled,Enabled"
group.long c15:(0x200F+0x0)++0x00
line.long 0x00 "IMP_ICERR0,Instruction Cache Error Record Register 0"
hexmask.long.byte 0x00 24.--31. 1. "RAMID,RAM bank"
hexmask.long.byte 0x00 4.--10. 1. "INDEX,Instruction cache index"
newline
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
group.long c15:(0x200F+0x100)++0x00
line.long 0x00 "IMP_ICERR1,Instruction Cache Error Record Register 1"
hexmask.long.byte 0x00 24.--31. 1. "RAMID,RAM bank"
hexmask.long.byte 0x00 4.--10. 1. "INDEX,Instruction cache index"
newline
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
group.long c15:(0x201F+0x0)++0x00
line.long 0x00 "IMP_DCERR0,Data Cache Error Record Register 0"
hexmask.long.word 0x00 20.--31. 1. "RAMID,RAM bank"
hexmask.long.byte 0x00 4.--10. 1. "INDEX,Data cache index"
newline
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
group.long c15:(0x201F+0x100)++0x00
line.long 0x00 "IMP_DCERR1,Data Cache Error Record Register 1"
hexmask.long.word 0x00 20.--31. 1. "RAMID,RAM bank"
hexmask.long.byte 0x00 4.--10. 1. "INDEX,Data cache index"
newline
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
group.long c15:(0x202F+0x0)++0x00
line.long 0x00 "IMP_TCMERR0,TCM Error Record Register 0"
hexmask.long.byte 0x00 24.--31. 1. "RAMID,RAM bank"
hexmask.long.tbyte 0x00 4.--20. 1. "INDEX,Bits [19:3] of the access address"
newline
bitfld.long 0x00 1. "FATAL,Fatal error" "Correctable,Fatal"
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
group.long c15:(0x202F+0x100)++0x00
line.long 0x00 "IMP_TCMERR1,TCM Error Record Register 1"
hexmask.long.byte 0x00 24.--31. 1. "RAMID,RAM bank"
hexmask.long.tbyte 0x00 4.--20. 1. "INDEX,Bits [19:3] of the access address"
newline
bitfld.long 0x00 1. "FATAL,Fatal error" "Correctable,Fatal"
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
rgroup.long c15:(0x222F+0x0)++0x00
line.long 0x00 "IMP_TCMSYNDR0,TCM Syndrome Register 0"
hexmask.long.byte 0x00 8.--14. 1. "BANK1,Syndrome for a bank 1 error"
hexmask.long.byte 0x00 0.--7. 1. "BANK0,Syndrome for a bank 0 error"
rgroup.long c15:(0x222F+0x100)++0x00
line.long 0x00 "IMP_TCMSYNDR1,TCM Syndrome Register 1"
hexmask.long.byte 0x00 8.--14. 1. "BANK1,Syndrome for a bank 1 error"
hexmask.long.byte 0x00 0.--7. 1. "BANK0,Syndrome for a bank 0 error"
group.long c15:(0x203F+0x0)++0x00
line.long 0x00 "IMP_FLASHERR0,Flash Error Record Register 0"
hexmask.long 0x00 4.--28. 1. "INDEX,Bits [25:1] of the access address"
bitfld.long 0x00 2. "LATE,Late error" "Not late,Late"
newline
bitfld.long 0x00 1. "FATAL,Fatal error" "Correctable,Fatal"
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
group.long c15:(0x203F+0x100)++0x00
line.long 0x00 "IMP_FLASHERR1,Flash Error Record Register 1"
hexmask.long 0x00 4.--28. 1. "INDEX,Bits [25:1] of the access address"
bitfld.long 0x00 2. "LATE,Late error" "Not late,Late"
newline
bitfld.long 0x00 1. "FATAL,Fatal error" "Correctable,Fatal"
bitfld.long 0x00 0. "VALID,Register contents are valid" "Not valid,Valid"
rgroup.long c15:0x400F++0x00
line.long 0x00 "IMP_TESTR0,Test Register 0"
bitfld.long 0x00 5. "VSEI,Virtual system error interrupt signal value" "0,1"
bitfld.long 0x00 4. "SEI,System error interrupt signal value" "0,1"
newline
bitfld.long 0x00 3. "VIRQ,Virtual IRQ interrupt signal value" "0,1"
bitfld.long 0x00 2. "IRQ,IRQ interrupt signal value" "0,1"
newline
bitfld.long 0x00 1. "VFIQ,Virtual FIQ interrupt signal value" "0,1"
bitfld.long 0x00 0. "FIQ,FIQ interrupt signal value" "0,1"
wgroup.long c15:0x410F++0x00
line.long 0x00 "IMP_TESTR1,Test Register 1"
tree.end
tree "Memory Protection Unit PL1"
rgroup.long c15:0x400++0x00
line.long 0x00 "MPUIR,MPU Type Register"
bitfld.long 0x00 8.--15. 1. "DREGION,Number of programmable memory regions" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,16,Reserved,Reserved,Reserved,20,Reserved,Reserved,Reserved,24,?..."
bitfld.long 0x00 0. "NU,Not unified MPU" "Unified,?..."
if (((per.l(c15:0x400))&0xFF00)>=0x1800)
group.long c15:0x0126++0x00
line.long 0x00 "PRSELR,Protection Region Selection Register"
bitfld.long 0x00 0.--4. "REGION,Indicates the memory region accessed by PRBAR and PRBAR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,?..."
elif (((per.l(c15:0x400))&0xFF00)>=0x1400)
group.long c15:0x0126++0x00
line.long 0x00 "PRSELR,Protection Region Selection Register"
bitfld.long 0x00 0.--4. "REGION,Indicates the memory region accessed by PRBAR and PRBAR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,?..."
elif (((per.l(c15:0x400))&0xFF00)>=0x1000)
group.long c15:0x0126++0x00
line.long 0x00 "PRSELR,Protection Region Selection Register"
bitfld.long 0x00 0.--3. "REGION,Indicates the memory region accessed by PRBAR and PRBAR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
hgroup.long c15:0x0126++0x00
hide.long 0x00 "PRSELR,Protection Region Selection Register"
endif
group.long c15:0x0036++0x00
line.long 0x00 "PRBAR,Protection Region Base Address Register"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:0x0136++0x00
line.long 0x00 "PRLAR,Protection Region Limit Address Register"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
tree "MPU regions"
if (((per.l(c15:0x400))&0xFF00)>=0x1000)
group.long c15:(0x0086+0x0)++0x00 "Region 0"
line.long 0x00 "PRBAR0,Protection Region Base Address Register 0"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x0)++0x00
line.long 0x00 "PRLAR0,Protection Region Limit Address Register 0"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x0)++0x00 "Region 1"
line.long 0x00 "PRBAR1,Protection Region Base Address Register 1"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x0)++0x00
line.long 0x00 "PRLAR1,Protection Region Limit Address Register 1"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x10)++0x00 "Region 2"
line.long 0x00 "PRBAR2,Protection Region Base Address Register 2"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x10)++0x00
line.long 0x00 "PRLAR2,Protection Region Limit Address Register 2"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x10)++0x00 "Region 3"
line.long 0x00 "PRBAR3,Protection Region Base Address Register 3"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x10)++0x00
line.long 0x00 "PRLAR3,Protection Region Limit Address Register 3"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x20)++0x00 "Region 4"
line.long 0x00 "PRBAR4,Protection Region Base Address Register 4"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x20)++0x00
line.long 0x00 "PRLAR4,Protection Region Limit Address Register 4"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x20)++0x00 "Region 5"
line.long 0x00 "PRBAR5,Protection Region Base Address Register 5"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x20)++0x00
line.long 0x00 "PRLAR5,Protection Region Limit Address Register 5"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x30)++0x00 "Region 6"
line.long 0x00 "PRBAR6,Protection Region Base Address Register 6"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x30)++0x00
line.long 0x00 "PRLAR6,Protection Region Limit Address Register 6"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x30)++0x00 "Region 7"
line.long 0x00 "PRBAR7,Protection Region Base Address Register 7"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x30)++0x00
line.long 0x00 "PRLAR7,Protection Region Limit Address Register 7"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x40)++0x00 "Region 8"
line.long 0x00 "PRBAR8,Protection Region Base Address Register 8"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x40)++0x00
line.long 0x00 "PRLAR8,Protection Region Limit Address Register 8"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x40)++0x00 "Region 9"
line.long 0x00 "PRBAR9,Protection Region Base Address Register 9"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x40)++0x00
line.long 0x00 "PRLAR9,Protection Region Limit Address Register 9"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x50)++0x00 "Region 10"
line.long 0x00 "PRBAR10,Protection Region Base Address Register 10"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x50)++0x00
line.long 0x00 "PRLAR10,Protection Region Limit Address Register 10"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x50)++0x00 "Region 11"
line.long 0x00 "PRBAR11,Protection Region Base Address Register 11"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x50)++0x00
line.long 0x00 "PRLAR11,Protection Region Limit Address Register 11"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x60)++0x00 "Region 12"
line.long 0x00 "PRBAR12,Protection Region Base Address Register 12"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x60)++0x00
line.long 0x00 "PRLAR12,Protection Region Limit Address Register 12"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x60)++0x00 "Region 13"
line.long 0x00 "PRBAR13,Protection Region Base Address Register 13"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x60)++0x00
line.long 0x00 "PRLAR13,Protection Region Limit Address Register 13"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0086+0x70)++0x00 "Region 14"
line.long 0x00 "PRBAR14,Protection Region Base Address Register 14"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0186+0x70)++0x00
line.long 0x00 "PRLAR14,Protection Region Limit Address Register 14"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x0486+0x70)++0x00 "Region 15"
line.long 0x00 "PRBAR15,Protection Region Base Address Register 15"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x0586+0x70)++0x00
line.long 0x00 "PRLAR15,Protection Region Limit Address Register 15"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
else
hgroup.long c15:(0x0086+0x0)++0x00 "Region 0 (not implemented)"
hide.long 0x00 "PRBAR0,Protection Region Base Address Register 0"
newline
hgroup.long c15:(0x0186+0x0)++0x00
hide.long 0x00 "PRLAR0,Protection Region Limit Address Register 0"
hgroup.long c15:(0x0486+0x0)++0x00 "Region 1 (not implemented)"
hide.long 0x00 "PRBAR1,Protection Region Base Address Register 1"
newline
hgroup.long c15:(0x0586+0x0)++0x00
hide.long 0x00 "PRLAR1,Protection Region Limit Address Register 1"
hgroup.long c15:(0x0086+0x10)++0x00 "Region 2 (not implemented)"
hide.long 0x00 "PRBAR2,Protection Region Base Address Register 2"
newline
hgroup.long c15:(0x0186+0x10)++0x00
hide.long 0x00 "PRLAR2,Protection Region Limit Address Register 2"
hgroup.long c15:(0x0486+0x10)++0x00 "Region 3 (not implemented)"
hide.long 0x00 "PRBAR3,Protection Region Base Address Register 3"
newline
hgroup.long c15:(0x0586+0x10)++0x00
hide.long 0x00 "PRLAR3,Protection Region Limit Address Register 3"
hgroup.long c15:(0x0086+0x20)++0x00 "Region 4 (not implemented)"
hide.long 0x00 "PRBAR4,Protection Region Base Address Register 4"
newline
hgroup.long c15:(0x0186+0x20)++0x00
hide.long 0x00 "PRLAR4,Protection Region Limit Address Register 4"
hgroup.long c15:(0x0486+0x20)++0x00 "Region 5 (not implemented)"
hide.long 0x00 "PRBAR5,Protection Region Base Address Register 5"
newline
hgroup.long c15:(0x0586+0x20)++0x00
hide.long 0x00 "PRLAR5,Protection Region Limit Address Register 5"
hgroup.long c15:(0x0086+0x30)++0x00 "Region 6 (not implemented)"
hide.long 0x00 "PRBAR6,Protection Region Base Address Register 6"
newline
hgroup.long c15:(0x0186+0x30)++0x00
hide.long 0x00 "PRLAR6,Protection Region Limit Address Register 6"
hgroup.long c15:(0x0486+0x30)++0x00 "Region 7 (not implemented)"
hide.long 0x00 "PRBAR7,Protection Region Base Address Register 7"
newline
hgroup.long c15:(0x0586+0x30)++0x00
hide.long 0x00 "PRLAR7,Protection Region Limit Address Register 7"
hgroup.long c15:(0x0086+0x40)++0x00 "Region 8 (not implemented)"
hide.long 0x00 "PRBAR8,Protection Region Base Address Register 8"
newline
hgroup.long c15:(0x0186+0x40)++0x00
hide.long 0x00 "PRLAR8,Protection Region Limit Address Register 8"
hgroup.long c15:(0x0486+0x40)++0x00 "Region 9 (not implemented)"
hide.long 0x00 "PRBAR9,Protection Region Base Address Register 9"
newline
hgroup.long c15:(0x0586+0x40)++0x00
hide.long 0x00 "PRLAR9,Protection Region Limit Address Register 9"
hgroup.long c15:(0x0086+0x50)++0x00 "Region 10 (not implemented)"
hide.long 0x00 "PRBAR10,Protection Region Base Address Register 10"
newline
hgroup.long c15:(0x0186+0x50)++0x00
hide.long 0x00 "PRLAR10,Protection Region Limit Address Register 10"
hgroup.long c15:(0x0486+0x50)++0x00 "Region 11 (not implemented)"
hide.long 0x00 "PRBAR11,Protection Region Base Address Register 11"
newline
hgroup.long c15:(0x0586+0x50)++0x00
hide.long 0x00 "PRLAR11,Protection Region Limit Address Register 11"
hgroup.long c15:(0x0086+0x60)++0x00 "Region 12 (not implemented)"
hide.long 0x00 "PRBAR12,Protection Region Base Address Register 12"
newline
hgroup.long c15:(0x0186+0x60)++0x00
hide.long 0x00 "PRLAR12,Protection Region Limit Address Register 12"
hgroup.long c15:(0x0486+0x60)++0x00 "Region 13 (not implemented)"
hide.long 0x00 "PRBAR13,Protection Region Base Address Register 13"
newline
hgroup.long c15:(0x0586+0x60)++0x00
hide.long 0x00 "PRLAR13,Protection Region Limit Address Register 13"
hgroup.long c15:(0x0086+0x70)++0x00 "Region 14 (not implemented)"
hide.long 0x00 "PRBAR14,Protection Region Base Address Register 14"
newline
hgroup.long c15:(0x0186+0x70)++0x00
hide.long 0x00 "PRLAR14,Protection Region Limit Address Register 14"
hgroup.long c15:(0x0486+0x70)++0x00 "Region 15 (not implemented)"
hide.long 0x00 "PRBAR15,Protection Region Base Address Register 15"
newline
hgroup.long c15:(0x0586+0x70)++0x00
hide.long 0x00 "PRLAR15,Protection Region Limit Address Register 15"
endif
if (((per.l(c15:0x400))&0xFF00)>=0x1400)
group.long c15:(0x1086+0x0)++0x00 "Region 16"
line.long 0x00 "PRBAR16,Protection Region Base Address Register 16"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1186+0x0)++0x00
line.long 0x00 "PRLAR16,Protection Region Limit Address Register 16"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x1486+0x0)++0x00 "Region 17"
line.long 0x00 "PRBAR17,Protection Region Base Address Register 17"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1586+0x0)++0x00
line.long 0x00 "PRLAR17,Protection Region Limit Address Register 17"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x1086+0x10)++0x00 "Region 18"
line.long 0x00 "PRBAR18,Protection Region Base Address Register 18"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1186+0x10)++0x00
line.long 0x00 "PRLAR18,Protection Region Limit Address Register 18"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x1486+0x10)++0x00 "Region 19"
line.long 0x00 "PRBAR19,Protection Region Base Address Register 19"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1586+0x10)++0x00
line.long 0x00 "PRLAR19,Protection Region Limit Address Register 19"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
else
hgroup.long c15:(0x1086+0x0)++0x00 "Region 16 (not implemented)"
hide.long 0x00 "PRBAR16,Protection Region Base Address Register 16"
newline
hgroup.long c15:(0x1186+0x0)++0x00
hide.long 0x00 "PRLAR16,Protection Region Limit Address Register 16"
hgroup.long c15:(0x1486+0x0)++0x00 "Region 17 (not implemented)"
hide.long 0x00 "PRBAR17,Protection Region Base Address Register 17"
newline
hgroup.long c15:(0x1586+0x0)++0x00
hide.long 0x00 "PRLAR17,Protection Region Limit Address Register 17"
hgroup.long c15:(0x1086+0x10)++0x00 "Region 18 (not implemented)"
hide.long 0x00 "PRBAR18,Protection Region Base Address Register 18"
newline
hgroup.long c15:(0x1186+0x10)++0x00
hide.long 0x00 "PRLAR18,Protection Region Limit Address Register 18"
hgroup.long c15:(0x1486+0x10)++0x00 "Region 19 (not implemented)"
hide.long 0x00 "PRBAR19,Protection Region Base Address Register 19"
newline
hgroup.long c15:(0x1586+0x10)++0x00
hide.long 0x00 "PRLAR19,Protection Region Limit Address Register 19"
endif
if (((per.l(c15:0x400))&0xFF00)>=0x1800)
group.long c15:(0x1086+0x20)++0x00 "Region 20"
line.long 0x00 "PRBAR20,Protection Region Base Address Register 20"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1186+0x20)++0x00
line.long 0x00 "PRLAR20,Protection Region Limit Address Register 20"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x1486+0x20)++0x00 "Region 21"
line.long 0x00 "PRBAR21,Protection Region Base Address Register 21"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1586+0x20)++0x00
line.long 0x00 "PRLAR21,Protection Region Limit Address Register 21"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x1086+0x30)++0x00 "Region 22"
line.long 0x00 "PRBAR22,Protection Region Base Address Register 22"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1186+0x30)++0x00
line.long 0x00 "PRLAR22,Protection Region Limit Address Register 22"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x1486+0x30)++0x00 "Region 23"
line.long 0x00 "PRBAR23,Protection Region Base Address Register 23"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access Permission bits" "None/RW,R/W,None/RO,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x1586+0x30)++0x00
line.long 0x00 "PRLAR23,Protection Region Limit Address Register 23"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL1 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
else
hgroup.long c15:(0x1086+0x20)++0x00 "Region 20 (not implemented)"
hide.long 0x00 "PRBAR20,Protection Region Base Address Register 20"
newline
hgroup.long c15:(0x1186+0x20)++0x00
hide.long 0x00 "PRLAR20,Protection Region Limit Address Register 20"
hgroup.long c15:(0x1486+0x20)++0x00 "Region 21 (not implemented)"
hide.long 0x00 "PRBAR21,Protection Region Base Address Register 21"
newline
hgroup.long c15:(0x1586+0x20)++0x00
hide.long 0x00 "PRLAR21,Protection Region Limit Address Register 21"
hgroup.long c15:(0x1086+0x30)++0x00 "Region 22 (not implemented)"
hide.long 0x00 "PRBAR22,Protection Region Base Address Register 22"
newline
hgroup.long c15:(0x1186+0x30)++0x00
hide.long 0x00 "PRLAR22,Protection Region Limit Address Register 22"
hgroup.long c15:(0x1486+0x30)++0x00 "Region 23 (not implemented)"
hide.long 0x00 "PRBAR23,Protection Region Base Address Register 23"
newline
hgroup.long c15:(0x1586+0x30)++0x00
hide.long 0x00 "PRLAR23,Protection Region Limit Address Register 23"
endif
tree.end
tree.end
tree "Memory Protection Unit PL2"
rgroup.long c15:0x4400++0x00
line.long 0x00 "HMPUIR,Hypervisor MPU Type Register"
bitfld.long 0x00 0.--7. 1. "REGION,Identifies the number of implemented regions" "0,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,16,Reserved,Reserved,Reserved,20,Reserved,Reserved,Reserved,24,?..."
if (((per.l(c15:0x4400))&0xFF)>=0x18)
group.long c15:0x4116++0x00
line.long 0x00 "HPRENR,Hypervisor MPU Region Enable Register"
bitfld.long 0x00 23. "EN23,Region enable 23" "Disabled,Enabled"
bitfld.long 0x00 22. "EN22,Region enable 22" "Disabled,Enabled"
bitfld.long 0x00 21. "EN21,Region enable 21" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "EN20,Region enable 20" "Disabled,Enabled"
bitfld.long 0x00 19. "EN19,Region enable 19" "Disabled,Enabled"
bitfld.long 0x00 18. "EN18,Region enable 18" "Disabled,Enabled"
newline
bitfld.long 0x00 17. "EN17,Region enable 17" "Disabled,Enabled"
bitfld.long 0x00 16. "EN16,Region enable 16" "Disabled,Enabled"
bitfld.long 0x00 15. "EN15,Region enable 15" "Disabled,Enabled"
newline
bitfld.long 0x00 14. "EN14,Region enable 14" "Disabled,Enabled"
bitfld.long 0x00 13. "EN13,Region enable 13" "Disabled,Enabled"
bitfld.long 0x00 12. "EN12,Region enable 12" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "EN11,Region enable 11" "Disabled,Enabled"
bitfld.long 0x00 10. "EN10,Region enable 10" "Disabled,Enabled"
bitfld.long 0x00 9. "EN9,Region enable 9" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "EN8,Region enable 8" "Disabled,Enabled"
bitfld.long 0x00 7. "EN7,Region enable 7" "Disabled,Enabled"
bitfld.long 0x00 6. "EN6,Region enable 6" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "EN5,Region enable 5" "Disabled,Enabled"
bitfld.long 0x00 4. "EN4,Region enable 4" "Disabled,Enabled"
bitfld.long 0x00 3. "EN3,Region enable 3" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "EN2,Region enable 2" "Disabled,Enabled"
bitfld.long 0x00 1. "EN1,Region enable 1" "Disabled,Enabled"
bitfld.long 0x00 0. "EN0,Region enable 0" "Disabled,Enabled"
elif (((per.l(c15:0x4400))&0xFF)>=0x14)
group.long c15:0x4116++0x00
line.long 0x00 "HPRENR,Hypervisor MPU Region Enable Register"
bitfld.long 0x00 19. "EN19,Region enable 19" "Disabled,Enabled"
bitfld.long 0x00 18. "EN18,Region enable 18" "Disabled,Enabled"
bitfld.long 0x00 17. "EN17,Region enable 17" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "EN16,Region enable 16" "Disabled,Enabled"
bitfld.long 0x00 15. "EN15,Region enable 15" "Disabled,Enabled"
bitfld.long 0x00 14. "EN14,Region enable 14" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "EN13,Region enable 13" "Disabled,Enabled"
bitfld.long 0x00 12. "EN12,Region enable 12" "Disabled,Enabled"
bitfld.long 0x00 11. "EN11,Region enable 11" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "EN10,Region enable 10" "Disabled,Enabled"
bitfld.long 0x00 9. "EN9,Region enable 9" "Disabled,Enabled"
bitfld.long 0x00 8. "EN8,Region enable 8" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "EN7,Region enable 7" "Disabled,Enabled"
bitfld.long 0x00 6. "EN6,Region enable 6" "Disabled,Enabled"
bitfld.long 0x00 5. "EN5,Region enable 5" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "EN4,Region enable 4" "Disabled,Enabled"
bitfld.long 0x00 3. "EN3,Region enable 3" "Disabled,Enabled"
bitfld.long 0x00 2. "EN2,Region enable 2" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "EN1,Region enable 1" "Disabled,Enabled"
bitfld.long 0x00 0. "EN0,Region enable 0" "Disabled,Enabled"
elif (((per.l(c15:0x4400))&0xFF)>=0x10)
group.long c15:0x4116++0x00
line.long 0x00 "HPRENR,Hypervisor MPU Region Enable Register"
bitfld.long 0x00 15. "EN15,Region enable 15" "Disabled,Enabled"
bitfld.long 0x00 14. "EN14,Region enable 14" "Disabled,Enabled"
bitfld.long 0x00 13. "EN13,Region enable 13" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "EN12,Region enable 12" "Disabled,Enabled"
bitfld.long 0x00 11. "EN11,Region enable 11" "Disabled,Enabled"
bitfld.long 0x00 10. "EN10,Region enable 10" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "EN9,Region enable 9" "Disabled,Enabled"
bitfld.long 0x00 8. "EN8,Region enable 8" "Disabled,Enabled"
bitfld.long 0x00 7. "EN7,Region enable 7" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "EN6,Region enable 6" "Disabled,Enabled"
bitfld.long 0x00 5. "EN5,Region enable 5" "Disabled,Enabled"
bitfld.long 0x00 4. "EN4,Region enable 4" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "EN3,Region enable 3" "Disabled,Enabled"
bitfld.long 0x00 2. "EN2,Region enable 2" "Disabled,Enabled"
bitfld.long 0x00 1. "EN1,Region enable 1" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "EN0,Region enable 0" "Disabled,Enabled"
else
rgroup.long c15:0x4116++0x00
line.long 0x00 "HPRENR,Hypervisor MPU Region Enable Register"
endif
if (((per.l(c15:0x4400))&0xFF)>=0x18)
group.long c15:0x4126++0x00
line.long 0x00 "HPRSELR,Hypervisor Protection Region Selection Register"
bitfld.long 0x00 0.--4. "REGION,The number of the current region visible in HPRBAR and HPRLAR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,?..."
elif (((per.l(c15:0x4400))&0xFF)>=0x14)
group.long c15:0x4126++0x00
line.long 0x00 "HPRSELR,Hypervisor Protection Region Selection Register"
bitfld.long 0x00 0.--4. "REGION,The number of the current region visible in HPRBAR and HPRLAR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,?..."
elif (((per.l(c15:0x4400))&0xFF)>=0x10)
group.long c15:0x4126++0x00
line.long 0x00 "HPRSELR,Hypervisor Protection Region Selection Register"
bitfld.long 0x00 0.--3. "REGION,The number of the current region visible in HPRBAR and HPRLAR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
hgroup.long c15:0x4126++0x00
hide.long 0x00 "HPRSELR,Hypervisor Protection Region Selection Register"
endif
group.long c15:0x4036++0x00
line.long 0x00 "HPRBAR,Hypervisor Protection Region Base Address Register"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W EL2 only,R/W,RO EL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:0x4136++0x00
line.long 0x00 "HPRLAR,Hypervisor Protection Region Limit Address Register"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
tree "MPU regions"
if (((per.l(c15:0x4400))&0xFF)>=0x10)
group.long c15:(0x4086+0x0)++0x00 "Region 0"
line.long 0x00 "HPRBAR0,Hypervisor Protection Region Base Address Register 0"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x0)++0x00
line.long 0x00 "HPRLAR0,Hypervisor Protection Region Limit Address Register 0"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x0)++0x00 "Region 1"
line.long 0x00 "HPRBAR1,Hypervisor Protection Region Base Address Register 1"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x0)++0x00
line.long 0x00 "HPRLAR1,Hypervisor Protection Region Limit Address Register 1"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x10)++0x00 "Region 2"
line.long 0x00 "HPRBAR2,Hypervisor Protection Region Base Address Register 2"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x10)++0x00
line.long 0x00 "HPRLAR2,Hypervisor Protection Region Limit Address Register 2"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x10)++0x00 "Region 3"
line.long 0x00 "HPRBAR3,Hypervisor Protection Region Base Address Register 3"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x10)++0x00
line.long 0x00 "HPRLAR3,Hypervisor Protection Region Limit Address Register 3"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x20)++0x00 "Region 4"
line.long 0x00 "HPRBAR4,Hypervisor Protection Region Base Address Register 4"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x20)++0x00
line.long 0x00 "HPRLAR4,Hypervisor Protection Region Limit Address Register 4"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x20)++0x00 "Region 5"
line.long 0x00 "HPRBAR5,Hypervisor Protection Region Base Address Register 5"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x20)++0x00
line.long 0x00 "HPRLAR5,Hypervisor Protection Region Limit Address Register 5"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x30)++0x00 "Region 6"
line.long 0x00 "HPRBAR6,Hypervisor Protection Region Base Address Register 6"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x30)++0x00
line.long 0x00 "HPRLAR6,Hypervisor Protection Region Limit Address Register 6"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x30)++0x00 "Region 7"
line.long 0x00 "HPRBAR7,Hypervisor Protection Region Base Address Register 7"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x30)++0x00
line.long 0x00 "HPRLAR7,Hypervisor Protection Region Limit Address Register 7"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x40)++0x00 "Region 8"
line.long 0x00 "HPRBAR8,Hypervisor Protection Region Base Address Register 8"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x40)++0x00
line.long 0x00 "HPRLAR8,Hypervisor Protection Region Limit Address Register 8"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x40)++0x00 "Region 9"
line.long 0x00 "HPRBAR9,Hypervisor Protection Region Base Address Register 9"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x40)++0x00
line.long 0x00 "HPRLAR9,Hypervisor Protection Region Limit Address Register 9"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x50)++0x00 "Region 10"
line.long 0x00 "HPRBAR10,Hypervisor Protection Region Base Address Register 10"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x50)++0x00
line.long 0x00 "HPRLAR10,Hypervisor Protection Region Limit Address Register 10"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x50)++0x00 "Region 11"
line.long 0x00 "HPRBAR11,Hypervisor Protection Region Base Address Register 11"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x50)++0x00
line.long 0x00 "HPRLAR11,Hypervisor Protection Region Limit Address Register 11"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x60)++0x00 "Region 12"
line.long 0x00 "HPRBAR12,Hypervisor Protection Region Base Address Register 12"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x60)++0x00
line.long 0x00 "HPRLAR12,Hypervisor Protection Region Limit Address Register 12"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x60)++0x00 "Region 13"
line.long 0x00 "HPRBAR13,Hypervisor Protection Region Base Address Register 13"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x60)++0x00
line.long 0x00 "HPRLAR13,Hypervisor Protection Region Limit Address Register 13"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4086+0x70)++0x00 "Region 14"
line.long 0x00 "HPRBAR14,Hypervisor Protection Region Base Address Register 14"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4186+0x70)++0x00
line.long 0x00 "HPRLAR14,Hypervisor Protection Region Limit Address Register 14"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x4486+0x70)++0x00 "Region 15"
line.long 0x00 "HPRBAR15,Hypervisor Protection Region Base Address Register 15"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x4586+0x70)++0x00
line.long 0x00 "HPRLAR15,Hypervisor Protection Region Limit Address Register 15"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
else
hgroup.long c15:(0x4086+0x0)++0x00 "Region 0 (not implemented)"
hide.long 0x00 "HPRBAR0,Hypervisor Protection Region Base Address Register 0"
newline
hgroup.long c15:(0x4186+0x0)++0x00
hide.long 0x00 "HPRLAR0,Hypervisor Protection Region Limit Address Register 0"
hgroup.long c15:(0x4486+0x0)++0x00 "Region 1 (not implemented)"
hide.long 0x00 "HPRBAR1,Hypervisor Protection Region Base Address Register 1"
newline
hgroup.long c15:(0x4586+0x0)++0x00
hide.long 0x00 "HPRLAR1,Hypervisor Protection Region Limit Address Register 1"
hgroup.long c15:(0x4086+0x10)++0x00 "Region 2 (not implemented)"
hide.long 0x00 "HPRBAR2,Hypervisor Protection Region Base Address Register 2"
newline
hgroup.long c15:(0x4186+0x10)++0x00
hide.long 0x00 "HPRLAR2,Hypervisor Protection Region Limit Address Register 2"
hgroup.long c15:(0x4486+0x10)++0x00 "Region 3 (not implemented)"
hide.long 0x00 "HPRBAR3,Hypervisor Protection Region Base Address Register 3"
newline
hgroup.long c15:(0x4586+0x10)++0x00
hide.long 0x00 "HPRLAR3,Hypervisor Protection Region Limit Address Register 3"
hgroup.long c15:(0x4086+0x20)++0x00 "Region 4 (not implemented)"
hide.long 0x00 "HPRBAR4,Hypervisor Protection Region Base Address Register 4"
newline
hgroup.long c15:(0x4186+0x20)++0x00
hide.long 0x00 "HPRLAR4,Hypervisor Protection Region Limit Address Register 4"
hgroup.long c15:(0x4486+0x20)++0x00 "Region 5 (not implemented)"
hide.long 0x00 "HPRBAR5,Hypervisor Protection Region Base Address Register 5"
newline
hgroup.long c15:(0x4586+0x20)++0x00
hide.long 0x00 "HPRLAR5,Hypervisor Protection Region Limit Address Register 5"
hgroup.long c15:(0x4086+0x30)++0x00 "Region 6 (not implemented)"
hide.long 0x00 "HPRBAR6,Hypervisor Protection Region Base Address Register 6"
newline
hgroup.long c15:(0x4186+0x30)++0x00
hide.long 0x00 "HPRLAR6,Hypervisor Protection Region Limit Address Register 6"
hgroup.long c15:(0x4486+0x30)++0x00 "Region 7 (not implemented)"
hide.long 0x00 "HPRBAR7,Hypervisor Protection Region Base Address Register 7"
newline
hgroup.long c15:(0x4586+0x30)++0x00
hide.long 0x00 "HPRLAR7,Hypervisor Protection Region Limit Address Register 7"
hgroup.long c15:(0x4086+0x40)++0x00 "Region 8 (not implemented)"
hide.long 0x00 "HPRBAR8,Hypervisor Protection Region Base Address Register 8"
newline
hgroup.long c15:(0x4186+0x40)++0x00
hide.long 0x00 "HPRLAR8,Hypervisor Protection Region Limit Address Register 8"
hgroup.long c15:(0x4486+0x40)++0x00 "Region 9 (not implemented)"
hide.long 0x00 "HPRBAR9,Hypervisor Protection Region Base Address Register 9"
newline
hgroup.long c15:(0x4586+0x40)++0x00
hide.long 0x00 "HPRLAR9,Hypervisor Protection Region Limit Address Register 9"
hgroup.long c15:(0x4086+0x50)++0x00 "Region 10 (not implemented)"
hide.long 0x00 "HPRBAR10,Hypervisor Protection Region Base Address Register 10"
newline
hgroup.long c15:(0x4186+0x50)++0x00
hide.long 0x00 "HPRLAR10,Hypervisor Protection Region Limit Address Register 10"
hgroup.long c15:(0x4486+0x50)++0x00 "Region 11 (not implemented)"
hide.long 0x00 "HPRBAR11,Hypervisor Protection Region Base Address Register 11"
newline
hgroup.long c15:(0x4586+0x50)++0x00
hide.long 0x00 "HPRLAR11,Hypervisor Protection Region Limit Address Register 11"
hgroup.long c15:(0x4086+0x60)++0x00 "Region 12 (not implemented)"
hide.long 0x00 "HPRBAR12,Hypervisor Protection Region Base Address Register 12"
newline
hgroup.long c15:(0x4186+0x60)++0x00
hide.long 0x00 "HPRLAR12,Hypervisor Protection Region Limit Address Register 12"
hgroup.long c15:(0x4486+0x60)++0x00 "Region 13 (not implemented)"
hide.long 0x00 "HPRBAR13,Hypervisor Protection Region Base Address Register 13"
newline
hgroup.long c15:(0x4586+0x60)++0x00
hide.long 0x00 "HPRLAR13,Hypervisor Protection Region Limit Address Register 13"
hgroup.long c15:(0x4086+0x70)++0x00 "Region 14 (not implemented)"
hide.long 0x00 "HPRBAR14,Hypervisor Protection Region Base Address Register 14"
newline
hgroup.long c15:(0x4186+0x70)++0x00
hide.long 0x00 "HPRLAR14,Hypervisor Protection Region Limit Address Register 14"
hgroup.long c15:(0x4486+0x70)++0x00 "Region 15 (not implemented)"
hide.long 0x00 "HPRBAR15,Hypervisor Protection Region Base Address Register 15"
newline
hgroup.long c15:(0x4586+0x70)++0x00
hide.long 0x00 "HPRLAR15,Hypervisor Protection Region Limit Address Register 15"
endif
if (((per.l(c15:0x4400))&0xFF)>=0x14)
group.long c15:(0x5086+0x0)++0x00 "Region 16"
line.long 0x00 "HPRBAR16,Hypervisor Protection Region Base Address Register 16"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5186+0x0)++0x00
line.long 0x00 "HPRLAR16,Hypervisor Protection Region Limit Address Register 16"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x5486+0x0)++0x00 "Region 17"
line.long 0x00 "HPRBAR17,Hypervisor Protection Region Base Address Register 17"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5586+0x0)++0x00
line.long 0x00 "HPRLAR17,Hypervisor Protection Region Limit Address Register 17"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x5086+0x10)++0x00 "Region 18"
line.long 0x00 "HPRBAR18,Hypervisor Protection Region Base Address Register 18"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5186+0x10)++0x00
line.long 0x00 "HPRLAR18,Hypervisor Protection Region Limit Address Register 18"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x5486+0x10)++0x00 "Region 19"
line.long 0x00 "HPRBAR19,Hypervisor Protection Region Base Address Register 19"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5586+0x10)++0x00
line.long 0x00 "HPRLAR19,Hypervisor Protection Region Limit Address Register 19"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
else
hgroup.long c15:(0x5086+0x0)++0x00 "Region 16 (not implemented)"
hide.long 0x00 "HPRBAR16,Hypervisor Protection Region Base Address Register 16"
newline
hgroup.long c15:(0x5186+0x0)++0x00
hide.long 0x00 "HPRLAR16,Hypervisor Protection Region Limit Address Register 16"
hgroup.long c15:(0x5486+0x0)++0x00 "Region 17 (not implemented)"
hide.long 0x00 "HPRBAR17,Hypervisor Protection Region Base Address Register 17"
newline
hgroup.long c15:(0x5586+0x0)++0x00
hide.long 0x00 "HPRLAR17,Hypervisor Protection Region Limit Address Register 17"
hgroup.long c15:(0x5086+0x10)++0x00 "Region 18 (not implemented)"
hide.long 0x00 "HPRBAR18,Hypervisor Protection Region Base Address Register 18"
newline
hgroup.long c15:(0x5186+0x10)++0x00
hide.long 0x00 "HPRLAR18,Hypervisor Protection Region Limit Address Register 18"
hgroup.long c15:(0x5486+0x10)++0x00 "Region 19 (not implemented)"
hide.long 0x00 "HPRBAR19,Hypervisor Protection Region Base Address Register 19"
newline
hgroup.long c15:(0x5586+0x10)++0x00
hide.long 0x00 "HPRLAR19,Hypervisor Protection Region Limit Address Register 19"
endif
if (((per.l(c15:0x4400))&0xFF)>=0x18)
group.long c15:(0x5086+0x20)++0x00 "Region 20"
line.long 0x00 "HPRBAR20,Hypervisor Protection Region Base Address Register 20"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5186+0x20)++0x00
line.long 0x00 "HPRLAR20,Hypervisor Protection Region Limit Address Register 20"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x5486+0x20)++0x00 "Region 21"
line.long 0x00 "HPRBAR21,Hypervisor Protection Region Base Address Register 21"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5586+0x20)++0x00
line.long 0x00 "HPRLAR21,Hypervisor Protection Region Limit Address Register 21"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x5086+0x30)++0x00 "Region 22"
line.long 0x00 "HPRBAR22,Hypervisor Protection Region Base Address Register 22"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5186+0x30)++0x00
line.long 0x00 "HPRLAR22,Hypervisor Protection Region Limit Address Register 22"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
group.long c15:(0x5486+0x30)++0x00 "Region 23"
line.long 0x00 "HPRBAR23,Hypervisor Protection Region Base Address Register 23"
hexmask.long 0x00 6.--31. 0x40 "BASE,Contains bits[31:6] of the lower inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 3.--4. "SH,Shareability field" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.long 0x00 1.--2. "AP,Access permission bits" "R/W PL2 only,R/W,RO PL2 only,RO"
newline
bitfld.long 0x00 0. "XN,Execute-never" "0,1"
group.long c15:(0x5586+0x30)++0x00
line.long 0x00 "HPRLAR23,Hypervisor Protection Region Limit Address Register 23"
hexmask.long 0x00 6.--31. 0x40 "LIMIT,Contains bits[31:6] of the upper inclusive limit of the selected PL2 MPU memory region"
bitfld.long 0x00 1.--3. "ATTRINDX[2:0],Associates a set of attributes in the HMAIR0/1 fields" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "EN,Region enable" "Disabled,Enabled"
else
hgroup.long c15:(0x5086+0x20)++0x00 "Region 20 (not implemented)"
hide.long 0x00 "HPRBAR20,Hypervisor Protection Region Base Address Register 20"
newline
hgroup.long c15:(0x5186+0x20)++0x00
hide.long 0x00 "HPRLAR20,Hypervisor Protection Region Limit Address Register 20"
hgroup.long c15:(0x5486+0x20)++0x00 "Region 21 (not implemented)"
hide.long 0x00 "HPRBAR21,Hypervisor Protection Region Base Address Register 21"
newline
hgroup.long c15:(0x5586+0x20)++0x00
hide.long 0x00 "HPRLAR21,Hypervisor Protection Region Limit Address Register 21"
hgroup.long c15:(0x5086+0x30)++0x00 "Region 22 (not implemented)"
hide.long 0x00 "HPRBAR22,Hypervisor Protection Region Base Address Register 22"
newline
hgroup.long c15:(0x5186+0x30)++0x00
hide.long 0x00 "HPRLAR22,Hypervisor Protection Region Limit Address Register 22"
hgroup.long c15:(0x5486+0x30)++0x00 "Region 23 (not implemented)"
hide.long 0x00 "HPRBAR23,Hypervisor Protection Region Base Address Register 23"
newline
hgroup.long c15:(0x5586+0x30)++0x00
hide.long 0x00 "HPRLAR23,Hypervisor Protection Region Limit Address Register 23"
endif
tree.end
tree.end
tree "Virtualization Extensions"
group.long c15:0x4000++0x00
line.long 0x00 "VPIDR,Virtualization Processor ID Register"
hexmask.long.byte 0x00 24.--31. 1. "IMPL,Implementer code"
bitfld.long 0x00 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "ARCH,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CPUID scheme"
hexmask.long.word 0x00 4.--15. 1. "PART,Primary part number"
newline
bitfld.long 0x00 0.--3. "REV,Minor revision of the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long c15:0x4500++0x00
line.long 0x00 "VMPIDR,Virtualization Multiprocessor ID Register"
bitfld.long 0x00 30. "U,Single core system as distinct from core 0 in a cluster" "Part of a cluster,?..."
bitfld.long 0x00 24. "MT,Multi-threading type approach for logical cores in lowest level of affinity" "Largely independent,?..."
newline
hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2"
hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1"
hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0"
group.long c15:0x420D++0x00
line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register"
group.long c15:0x4001++0x00
line.long 0x00 "HSCTLR,Hypervisor System Control Register"
bitfld.long 0x00 30. "TE,Thumb exception enable" "A32,T32"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.long 0x00 21. "FI,Fast interrupts configuration enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "WXN,Write permission implies Execute Never (XN)" "Not forced,Forced"
bitfld.long 0x00 17. "BR,Background region enable" "Disabled,Enabled"
bitfld.long 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND instruction disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT instruction disable" "No,Yes"
bitfld.long 0x00 5. "CP15BEN,CP15* barrier operations enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "C,Data cache enable" "Disabled,Enabled"
bitfld.long 0x00 1. "A,Alignment fault checking enable" "Disabled,Enabled"
bitfld.long 0x00 0. "M,EL2-controlled MPU enable" "Disabled,Enabled"
group.long c15:0x4002++0x00
line.long 0x00 "VSCTLR,Virtualization System Control Register"
hexmask.long.byte 0x00 16.--23. 1. "VMID,Virtual machine ID"
bitfld.long 0x00 2. "S2NIE,Stage-2 normal interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "S2DMAD,Stage-2 device multiple access disable" "Disabled,Enabled"
group.long c15:0x4101++0x00
line.long 0x00 "HACTLR,Hypervisor Auxiliary Control Register"
bitfld.long 0x00 15. "TESTR1,Controls access to TESTR1 at EL0 and EL1" "Trapped,Enabled"
bitfld.long 0x00 13. "ERR,Controls access to IMP_DCERR0, IMP_DCERR1, IMP_ICERR0, IMP_ICERR1, IMP_TCMERR0, IMP_TCMERR1, IMP_FLASHERR0 and IMP_FLASHERR1 registers" "Trapped,Enabled"
bitfld.long 0x00 12. "INTMONR,Controls access to IMP_INTMONR at EL1" "Trapped,Enabled"
newline
bitfld.long 0x00 10. "BUSTIMEOUTR,Controls access to IMP_BUSTIMEOUTR at EL1" "Trapped,Enabled"
bitfld.long 0x00 9. "QOSR,Controls access to QOSR at EL1" "Trapped,Enabled"
bitfld.long 0x00 8. "PERIPHPREGIONR,Controls access to IMP_PERIPHPREGIONR at EL1" "Trapped,Enabled"
newline
bitfld.long 0x00 7. "FLASHIFREGIONR,Controls access to IMP_FLASHIFREGIONR at EL1" "Trapped,Enabled"
bitfld.long 0x00 1. "CDBGDCI,Controls access to CDBGDCI at EL1" "Trapped,Enabled"
bitfld.long 0x00 0. "CPUACTLR,IMP_CPUACTLR write access control" "Trapped,Enabled"
rgroup.long c15:0x4711++0x00
line.long 0x00 "HACR,Hypervisor Auxiliary Configuration Register"
group.long c15:0x4011++0x00
line.long 0x00 "HCR,Hypervisor Configuration Register"
bitfld.long 0x00 30. "TRVM,Trap read of virtual memory controls" "Disabled,Enabled"
bitfld.long 0x00 29. "HCD,HVC instruction disable" "No,Yes"
bitfld.long 0x00 27. "TGE,Trap general exceptions" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "TVM,Trap virtual memory controls" "Disabled,Enabled"
bitfld.long 0x00 24. "TPU,Trap cache maintenance instructions that operate to the point of unification" "Disabled,Enabled"
bitfld.long 0x00 23. "TPC,Trap Data Cache maintenance operations that operate to the point of coherency" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "TSW,Trap data/unified cache maintenance instructions by set/way" "Disabled,Enabled"
bitfld.long 0x00 21. "TAC,Trap ACTLR accesses" "Disabled,Enabled"
bitfld.long 0x00 20. "TIDCP,Trap lockdown" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
bitfld.long 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.long 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
bitfld.long 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
bitfld.long 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "DC,Default cacheable" "Disabled,Enabled"
bitfld.long 0x00 10.--11. "BSU,Barrier shareability upgrade" "No effect,Inner shareable,Outer shareable,Full system"
bitfld.long 0x00 9. "FB,Force broadcast" "Not forced,Forced"
newline
bitfld.long 0x00 8. "VA,Virtual asynchronous abort exception" "Not pending,Pending"
bitfld.long 0x00 7. "VI,Virtual IRQ exception" "Not pending,Pending"
bitfld.long 0x00 6. "VF,Virtual FIQ exception" "Not pending,Pending"
newline
bitfld.long 0x00 5. "AMO,A-bit mask override" "Disabled,Enabled"
bitfld.long 0x00 4. "IMO,I-bit mask override" "Disabled,Enabled"
bitfld.long 0x00 3. "FMO,F-bit mask override" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override"
bitfld.long 0x00 0. "VM,Second stage of translation enable" "Disabled,Enabled"
rgroup.long c15:0x4411++0x00
line.long 0x00 "HCR2,Hypervisor Configuration Register 2"
group.long c15:0x3054++0x00
line.long 0x00 "DSPSR,Debug Saved Program Status Register"
bitfld.long 0x00 31. "N,Negative condition flag" "Not negative,Negative"
bitfld.long 0x00 30. "Z,Zero condition flag" "Not zero,Zero"
bitfld.long 0x00 29. "C,Carry condition flag" "Not carry,Carry"
newline
bitfld.long 0x00 28. "V,Overflow condition flag" "No overflow,Overflow"
bitfld.long 0x00 27. "Q,Cumulative condition flag" "Not occurred,Occurred"
bitfld.long 0x00 21. "SS,Software step" "0,1"
newline
bitfld.long 0x00 20. "IL,Illegal execution state" "0,1"
bitfld.long 0x00 14.--15. 25.--26. "IT[4:7],IT block state bits for the T32 IT (if-then) instruction - base condition for the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--13. "IT[0:3],IT block state bits for the T32 IT (if-then) instruction - size of the IT block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "GE,Greater than or equal flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9. "E,Endianness state bit" "Little,Big"
bitfld.long 0x00 8. "A,Asynchronous data abort mask bit" "Not masked,Masked"
newline
bitfld.long 0x00 7. "I,IRQ mask bit" "Not masked,Masked"
bitfld.long 0x00 6. "F,FIQ mask bit" "Not masked,Masked"
bitfld.long 0x00 5. "T,T32 Instruction set state" "A32,T32"
newline
bitfld.long 0x00 4. "M[4],Execution state that the exception was taken from" "Reserved,AArch32"
bitfld.long 0x00 0.--3. "M[3:0],Current PE mode" "User,FIQ,IRQ,Supervisor,Reserved,Reserved,Monitor,Abort,Reserved,Reserved,Hyp,Undefined,Reserved,Reserved,Reserved,System"
group.long c15:0x4111++0x00
line.long 0x00 "HDCR,Hypervisor Debug Control Register"
bitfld.long 0x00 21. "EPMAD,External debugger access to hypervisor performance monitors registers disabled" "No,Yes"
bitfld.long 0x00 17. "HPMD,Hypervisor performance monitors disable" "No,Yes"
bitfld.long 0x00 11. "TDRA,Trap debug ROM access" "No effect,Valid"
newline
bitfld.long 0x00 10. "TDOSA,Trap debug OS-related register access" "No effect,Valid"
bitfld.long 0x00 9. "TDA,Trap debug access" "No effect,Valid"
bitfld.long 0x00 8. "TDE,Trap debug exceptions" "No effect,Valid"
newline
bitfld.long 0x00 7. "HPME,Hypervisor performance monitors enable" "Disabled,Enabled"
bitfld.long 0x00 6. "TPM,Trap performance monitors accesses" "No effect,Valid"
bitfld.long 0x00 5. "TPMCR,Trap performance monitor control register accesses" "No effect,Valid"
newline
bitfld.long 0x00 0.--4. "HPMN,Defines the number of performance monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long c15:0x4211++0x00
line.long 0x00 "HCPTR,Hypervisor Architectural Feature Trap Register"
bitfld.long 0x00 31. "TCPAC,Trap coprocessor access control" "Not trapped,Trapped"
bitfld.long 0x00 15. "TASE,Trap advanced SIMD extensions" "Not trapped,Trapped"
newline
bitfld.long 0x00 11. "TCP11,Trap coprocessor 11" "Not trapped,Trapped"
bitfld.long 0x00 10. "TCP10,Trap coprocessor 10" "Not trapped,Trapped"
group.long c15:0x4311++0x00
line.long 0x00 "HSTR,Hypervisor System Trap Register"
bitfld.long 0x00 15. "T15,Trap to Hypervisor mode Non-secure priv 15" "No effect,Trap"
bitfld.long 0x00 13. "T13,Trap to Hypervisor mode Non-secure priv 13" "No effect,Trap"
bitfld.long 0x00 12. "T12,Trap to Hypervisor mode Non-secure priv 12" "No effect,Trap"
newline
bitfld.long 0x00 11. "T11,Trap to Hypervisor mode Non-secure priv 11" "No effect,Trap"
bitfld.long 0x00 10. "T10,Trap to Hypervisor mode Non-secure priv 10" "No effect,Trap"
bitfld.long 0x00 9. "T9,Trap to Hypervisor mode Non-secure priv 9" "No effect,Trap"
newline
bitfld.long 0x00 8. "T8,Trap to Hypervisor mode Non-secure priv 8" "No effect,Trap"
bitfld.long 0x00 7. "T7,Trap to Hypervisor mode Non-secure priv 7" "No effect,Trap"
bitfld.long 0x00 6. "T6,Trap to Hypervisor mode Non-secure priv 6" "No effect,Trap"
newline
bitfld.long 0x00 5. "T5,Trap to Hypervisor mode Non-secure priv 5" "No effect,Trap"
bitfld.long 0x00 3. "T3,Trap to Hypervisor mode Non-secure priv 3" "No effect,Trap"
bitfld.long 0x00 2. "T2,Trap to Hypervisor mode Non-secure priv 2" "No effect,Trap"
newline
bitfld.long 0x00 1. "T1,Trap to Hypervisor mode Non-secure priv 1" "No effect,Trap"
bitfld.long 0x00 0. "T0,Trap to Hypervisor mode Non-secure priv 0" "No effect,Trap"
rgroup.long c15:0x4301++0x00
line.long 0x00 "HACTLR2,Hypervisor Auxiliary Control Register 2"
group.long c15:0x3154++0x00
line.long 0x00 "DLR,Debug Link Register"
group.long c15:0x4015++0x00
line.long 0x00 "HADFSR,Hypervisor Auxiliary Data Fault Status Syndrome Register"
bitfld.long 0x00 2.--4. "PORT,Memory or port that caused the fault" "AXIM,Flash interface,LLPP,Internal interface,ATCM,BTCM,CTCM,?..."
bitfld.long 0x00 0.--1. "TYPE,Fault type" "Undefined,Response,ECC on data,Bus timeout"
group.long c15:0x4006++0x00
line.long 0x00 "HDFAR,Hypervisor Data Fault Address Register"
if (((per.l(c15:0x4025))&0xFC000000)==(0x00000000||0x38000000||0x88000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
elif (((per.l(c15:0x4025))&0xFC000000)==0x04000000)
if (((per.l(c15:0x4025))&0x01000000)==0x01000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
endif
elif (((per.l(c15:0x4025))&0xFC000000)==(0x0C000000||0x14000000||0x20000000))
if (((per.l(c15:0x4025))&0x01000000)==0x01000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--8. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
bitfld.long 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--8. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
endif
elif (((per.l(c15:0x4025))&0xFC000000)==(0x10000000||0x30000000))
if (((per.l(c15:0x4025))&0x01000000)==0x01000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--13. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--8. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
bitfld.long 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--13. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5.--8. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
endif
elif (((per.l(c15:0x4025))&0xFC000000)==0x18000000)
if (((per.l(c15:0x4025))&0x01000000)==0x01000000)
if (((per.l(c15:0x4025))&0x08)==0x00)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--8. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..."
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..."
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
endif
else
if (((per.l(c15:0x4025))&0x08)==0x00)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--8. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
endif
endif
elif (((per.l(c15:0x4025))&0xFC000000)==0x1C000000)
if (((per.l(c15:0x4025))&0x01000000)==0x01000000)
if (((per.l(c15:0x4025))&0x20)==0x20)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 5. "TA,Indicates trapped use of advanced SIMD functionality" "Not trapped,Trapped"
bitfld.long 0x00 0.--3. "COPROC,COPROC" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,0b1010,?..."
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 5. "TA,Indicates trapped use of advanced SIMD functionality" "Not trapped,Trapped"
endif
else
if (((per.l(c15:0x4025))&0x20)==0x20)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
bitfld.long 0x00 5. "TA,Indicates trapped use of advanced SIMD functionality" "Not trapped,Trapped"
bitfld.long 0x00 0.--3. "COPROC,COPROC" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,0b1010,?..."
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
newline
bitfld.long 0x00 5. "TA,Indicates trapped use of advanced SIMD functionality" "Not trapped,Trapped"
endif
endif
elif (((per.l(c15:0x4025))&0xFC000000)==(0x44000000||0x48000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((per.l(c15:0x4025))&0xFC000000)==(0x80000000||0x84000000))
if (((per.l(c15:0x4025))&0x3F)==0x10)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not valid" "No,Yes"
newline
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction fault status code" "Reserved,Reserved,Reserved,Reserved,Translation fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault,Reserved,Reserved,Reserved,Synch. external abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synch. parity/ECC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Debug,?..."
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
newline
newline
bitfld.long 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction fault status code" "Reserved,Reserved,Reserved,Reserved,Translation fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault,Reserved,Reserved,Reserved,Synch. external abort,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synch. parity/ECC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Debug,?..."
endif
elif (((per.l(c15:0x4025))&0xFD00003F)==(0x95000010||0x91000010))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
newline
bitfld.long 0x00 22.--23. "SAS,Syndrome access size" "Byte,Halfword,Word,Doubleword"
bitfld.long 0x00 21. "SSE,Syndrome sign extend" "Not required,Required"
bitfld.long 0x00 16.--19. "SRT,Syndrome register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not valid" "No,Yes"
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 8. "CM,Fault came from a cache maintenance instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "DFSC,Data fault status code" "Reserved,Reserved,Reserved,Reserved,Translation fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault,Reserved,Reserved,Reserved,Synch. external abort,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synch. parity/ECC,SError/parity/ECC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Cache lockdown fault,Unsupported Exclusive access,?..."
elif (((per.l(c15:0x4025))&0xFD000000)==(0x95000000||0x91000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
newline
bitfld.long 0x00 22.--23. "SAS,Syndrome access size" "Byte,Halfword,Word,Doubleword"
bitfld.long 0x00 21. "SSE,Syndrome sign extend" "Not required,Required"
bitfld.long 0x00 16.--19. "SRT,Syndrome register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 8. "CM,Fault came from a cache maintenance instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "DFSC,Data fault status code" "Reserved,Reserved,Reserved,Reserved,Translation fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault,Reserved,Reserved,Reserved,Synch. external abort,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synch. parity/ECC,SError/parity/ECC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Cache lockdown fault,Unsupported Exclusive access,?..."
elif (((per.l(c15:0x4025))&0xFD00003F)==(0x90000010||0x94000010))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
newline
newline
newline
bitfld.long 0x00 10. "FNV,FAR not valid" "No,Yes"
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 8. "CM,Fault came from a cache maintenance instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "DFSC,Data fault status code" "Reserved,Reserved,Reserved,Reserved,Translation fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault,Reserved,Reserved,Reserved,Synch. external abort,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synch. parity/ECC,SError/parity/ECC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Cache lockdown fault,Unsupported Exclusive access,?..."
elif (((per.l(c15:0x4025))&0xFD000000)==(0x90000000||0x94000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
newline
newline
newline
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 8. "CM,Fault came from a cache maintenance instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "DFSC,Data fault status code" "Reserved,Reserved,Reserved,Reserved,Translation fault,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Permission fault,Reserved,Reserved,Reserved,Synch. external abort,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Synch. parity/ECC,SError/parity/ECC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Alignment fault,Debug,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Cache lockdown fault,Unsupported Exclusive access,?..."
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/MRC,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC executed,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Prefetch abort routed to hyp,Prefetch abort taken from hyp,PC alignment fault,Reserved,Data abort routed to hyp,Data abort taken from hyp,?..."
bitfld.long 0x00 25. "IL,Instruction length for synchronous exceptions" "16-bit,32-bit"
endif
group.long c15:0x4115++0x00
line.long 0x00 "HAIFSR,Hypervisor Auxiliary Instruction Fault Status Register"
bitfld.long 0x00 2.--4. "PORT,Memory or port that caused the fault" "AXIM,Flash interface,LLPP,Reserved,ATCM,BTCM,CTCM,UNKNOWN"
bitfld.long 0x00 0.--1. "TYPE,Fault type" "Undefined,Response,ECC on data,Bus timeout"
group.long c15:0x4206++0x00
line.long 0x00 "HIFAR,Hypervisor Instruction Fault Address Register"
group.long c15:0x4406++0x00
line.long 0x00 "HPFAR,Hypervisor IPA Fault Address Register"
hexmask.long 0x00 4.--31. 1. "FIPA,Faulting IPA bits"
tree.open "Hypervisor Memory Attribute Indirection Registers"
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
rgroup.long c15:0x403A++0x00
line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0"
rgroup.long c15:0x413A++0x00
line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1"
tree.end
newline
group.long c15:0x400C++0x00
line.long 0x00 "HVBAR,Hypervisor Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "VBA,Vector base address"
group.long c15:0x420C++0x00
line.long 0x00 "HRMR,Hypervisor Reset Management Register"
bitfld.long 0x00 1. "RR,Reset request" "Not requested,Requested"
group.long c15:0x1119++0x00
line.long 0x00 "IMP_BPCTLR,Branch Predictor Control Register"
bitfld.long 0x00 2. "DBPEL2DIS,Disable dynamic branch predictor when running at EL2" "No,Yes"
bitfld.long 0x00 1. "DBPEL1DIS,Disable dynamic branch predictor when running at EL1" "No,Yes"
bitfld.long 0x00 0. "DBPEL0DIS,Disable dynamic branch predictor when running at EL0" "No,Yes"
tree.end
tree "Cache Control and Configuration"
rgroup.long c15:0x0100++0x00
line.long 0x00 "CTR,Cache Type Register"
bitfld.long 0x00 24.--27. "CWG,Cache write-back granule" "Reserved,2 words,?..."
bitfld.long 0x00 20.--23. "ERG,Exclusives reservation granule" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x00 16.--19. "DMINLINE,D-cache minimum line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x00 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.long 0x00 0.--3. "IMINLINE,I-cache minimum line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
group.long c15:0x2000++0x00
line.long 0x00 "CSSELR,Cache Size Selection Register"
rbitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,?..."
bitfld.long 0x00 0. "IND,Instruction/not data" "Data/unified,Instruction"
rgroup.long c15:0x1000++0x00
line.long 0x00 "CCSIDR,Current Cache Size ID Register"
bitfld.long 0x00 31. "WT,Write-through" "Not supported,Supported"
bitfld.long 0x00 30. "WB,Write-back" "Not supported,?..."
newline
bitfld.long 0x00 29. "RA,Read-allocate" "Reserved,Supported"
bitfld.long 0x00 28. "WA,Write-allocate" "Not supported,Supported"
newline
hexmask.long.word 0x00 13.--27. 1. 1. "SETS,Number of sets"
hexmask.long.word 0x00 3.--12. 1. 1. "ASSOC,Associativity"
newline
bitfld.long 0x00 0.--2. "LSIZE,Number of words in each cache line" "Reserved,Reserved,16,?..."
rgroup.long c15:0x1100++0x00
line.long 0x00 "CLIDR,Cache Level ID Register"
bitfld.long 0x00 30.--31. "ICB,Inner cache boundary" "Not disclosed,?..."
bitfld.long 0x00 27.--29. "LOUU,Level of unification" "Level 0,Level 1,?..."
bitfld.long 0x00 24.--26. "LOC,Level of coherency" "Level 0,Level 1,?..."
newline
bitfld.long 0x00 21.--23. "LOUIS,Level of unification inner shareable" "Level 0,Level 1,?..."
bitfld.long 0x00 18.--20. "CTYPE7,Cache type for levels 7" "No cache,?..."
newline
bitfld.long 0x00 15.--17. "CTYPE6,Cache type for levels 6" "No cache,?..."
bitfld.long 0x00 12.--14. "CTYPE5,Cache type for levels 5" "No cache,?..."
newline
bitfld.long 0x00 9.--11. "CTYPE4,Cache type for levels 4" "No cache,?..."
bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
newline
bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,?..."
bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "No cache,Instruction cache,Data cache,Both separated,?..."
group.long c15:0x1019++0x00
line.long 0x00 "IMP_CSCTLR,Cache Segregation Control Register"
bitfld.long 0x00 8.--10. "IFLW,Instruction cache flash ways" "Reserved,0,0-1,0-2,0-3,?..."
bitfld.long 0x00 0.--2. "DFLW,Data cache flash ways" "Reserved,0,0-1,0-2,0-3,?..."
group.quad c15:0x100F0++0x01
line.quad 0x00 "CPUACTLR,CPU Auxiliary Control Register"
bitfld.quad 0x00 47. "FIXEDDIV,Enable fixed latency for integer divide instructions" "Disabled,Enabled"
bitfld.quad 0x00 46. "ETACDIS,Disable PFU exception target address cache" "No,Yes"
bitfld.quad 0x00 45. "OOODIVDIS,Disable out-of-order completion of divide instructions" "No,Yes"
newline
bitfld.quad 0x00 41. "TLACDIS,Disable the store unit (STU) tag lookup avoidance cache" "No,Yes"
bitfld.quad 0x00 40. "FLASHNDDIS,Disable flash accesses use of non-flash-dedicated resources" "No,Yes"
bitfld.quad 0x00 39. "FLASHARBCTL,Flash interface arbitration control" "D-side,I-side"
newline
bitfld.quad 0x00 38. "AXIMARBCTL,AXIM interface arbitration control" "D-side,I-side"
bitfld.quad 0x00 33. "ISPECDIS,Disable I-side speculative access" "No,Yes"
bitfld.quad 0x00 32. "DSPECDIS,Disable D-side speculative access" "No,Yes"
newline
bitfld.quad 0x00 30. "FPDIDIS,Disable floating-point dual issue" "No,Yes"
bitfld.quad 0x00 29. "DIDIS,Disable Dual Issue" "No,Yes"
bitfld.quad 0x00 25.--26. "WSTRNOL1ACTL,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled streaming"
newline
bitfld.quad 0x00 19.--20. "DPFSTRCTL,Number of independent data prefetch streams" "1,2,3,4"
bitfld.quad 0x00 17. "STRIDECTL,Enable stride detection" "2,3"
bitfld.quad 0x00 13.--15. "L1DPFCTL,L1 Data prefetch control" "Disabled,1 outstanding prefetch,2 outstanding prefetch,3 outstanding prefetch,4 outstanding prefetch,5 outstanding prefetch,6 outstanding prefetch,8 outstanding prefetch"
newline
bitfld.quad 0x00 11. "L1IPFCTL,L1 Instruction prefetch control" "Disabled,Enabled"
bitfld.quad 0x00 10. "DMB2DSBEN,Enable data memory barrier behaving as data synchronization barrier" "Disabled,Enabled"
wgroup.long c15:0x10EF++0x00
line.long 0x00 "IMP_CDBGDCI,Invalidate All Register"
tree "Level 1 memory system"
rgroup.long c15:0x300F++0x00
line.long 0x00 "IMP_CDBGDR0,Cache Debug Data Register 0"
bitfld.long 0x00 22. "V,Valid" "0,1"
hexmask.long.tbyte 0x00 0.--21. 1. "TB,Tag bits"
rgroup.long c15:0x310F++0x00
line.long 0x00 "IMP_CDBGDR1,Cache Debug Data Register 1"
wgroup.long c15:0x302F++0x00
line.long 0x00 "IMP_CDBGDCT,Data Cache Tag Read Operation Register"
bitfld.long 0x00 30.--31. "CW,Cache way" "0,1,2,3"
hexmask.long.word 0x00 6.--12. 1. "SETIND,Set index"
wgroup.long c15:0x312F++0x00
line.long 0x00 "IMP_CDBGICT,Instruction Cache Tag Read Operation Register"
bitfld.long 0x00 30.--31. "CW,Cache way" "0,1,2,3"
hexmask.long.word 0x00 6.--12. 1. "SETIND,Set index"
wgroup.long c15:0x304F++0x00
line.long 0x00 "IMP_CDBGDCD,Data Cache Data Read Operation Register"
bitfld.long 0x00 30.--31. "CW,Cache way" "0,1,2,3"
hexmask.long.word 0x00 6.--12. 1. "SETIND,Set index"
bitfld.long 0x00 3.--5. "DO,Data offset" "0,1,2,3,4,5,6,7"
wgroup.long c15:0x314F++0x00
line.long 0x00 "IMP_CDBGICD,Instruction Cache Data Read Operation Register"
bitfld.long 0x00 30.--31. "CW,Cache way" "0,1,2,3"
hexmask.long.word 0x00 6.--12. 1. "SETIND,Set index"
bitfld.long 0x00 3.--5. "DO,Data offset" "0,1,2,3,4,5,6,7"
tree.end
tree.end
tree "System Performance Monitor"
group.long c15:0x00C9++0x00
line.long 0x00 "PMCR,Performance Monitors Control Register"
hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code"
hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code"
rbitfld.long 0x00 11.--15. "N,Number of counters implemented" "Reserved,Reserved,Reserved,Reserved,4,?..."
bitfld.long 0x00 6. "LC,Long cycle counter enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes"
bitfld.long 0x00 4. "X,Export enable" "Disabled,Enabled"
bitfld.long 0x00 3. "D,Clock divider" "Every cycle,64th cycle"
bitfld.long 0x00 2. "C,Clock counter reset" "No reset,Reset"
newline
bitfld.long 0x00 1. "P,Performance counter reset" "No reset,Reset"
bitfld.long 0x00 0. "E,All counters enable" "Disabled,Enabled"
group.long c15:0x01C9++0x00
line.long 0x00 "PMCNTENSET,Count Enable Set Register"
bitfld.long 0x00 31. "C,CCNT overflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "P3,Event counter PMN 3 enable bit" "Disabled,Enabled"
bitfld.long 0x00 2. "P2,Event counter PMN 2 enable bit" "Disabled,Enabled"
bitfld.long 0x00 1. "P1,Event counter PMN 1 enable bit" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,Event counter PMN 0 enable bit" "Disabled,Enabled"
group.long c15:0x02C9++0x00
line.long 0x00 "PMCNTENCLR,Count Enable Clear Register"
bitfld.long 0x00 31. "C,CCNT overflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "P3,Event counter PMN 3 enable bit" "Disabled,Enabled"
bitfld.long 0x00 2. "P2,Event counter PMN 2 enable bit" "Disabled,Enabled"
bitfld.long 0x00 1. "P1,Event counter PMN 1 enable bit" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,Event counter PMN 0 enable bit" "Disabled,Enabled"
group.long c15:0x03C9++0x00
line.long 0x00 "PMOVSR,Overflow Status Flags Register"
eventfld.long 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow"
newline
eventfld.long 0x00 3. "P3,PMN3 overflow" "No overflow,Overflow"
eventfld.long 0x00 2. "P2,PMN2 overflow" "No overflow,Overflow"
eventfld.long 0x00 1. "P1,PMN1 overflow" "No overflow,Overflow"
eventfld.long 0x00 0. "P0,PMN0 overflow" "No overflow,Overflow"
wgroup.long c15:0x04C9++0x00
line.long 0x00 "PMSWINC,Software Increment Register"
bitfld.long 0x00 3. "P3,PMN3 software increment" "No effect,Increment"
bitfld.long 0x00 2. "P2,PMN2 software increment" "No effect,Increment"
bitfld.long 0x00 1. "P1,PMN1 software increment" "No effect,Increment"
bitfld.long 0x00 0. "P0,PMN0 software increment" "No effect,Increment"
group.long c15:0x05C9++0x00
line.long 0x00 "PMSELR,Event Counter Selection Register"
bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.open "Common Event Identification Registers"
rgroup.long c15:0x06C9++0x00
line.long 0x00 "PMCEID0,Common Event Identification Register 0"
bitfld.long 0x00 30. "CHAIN,Chain" "Not implemented,Implemented"
bitfld.long 0x00 29. "BUS_CYCLES,Bus cycle" "Not implemented,Implemented"
bitfld.long 0x00 27. "INST_SPEC,Instruction speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 26. "MEMORY_ERROR,Local memory error" "Not implemented,Implemented"
newline
bitfld.long 0x00 25. "BUS_ACCESS,Bus access" "Not implemented,Implemented"
bitfld.long 0x00 20. "L1I_CACHE,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.long 0x00 19. "MEM_ACCESS,Data memory access" "Not implemented,Implemented"
bitfld.long 0x00 18. "BR_PRED,Predictable branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 17. "CPU_CYCLES,CPU cycle" "Not implemented,Implemented"
bitfld.long 0x00 16. "BR_MIS_PRED,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 15. "UNALIGNED_LDST_RETIRED,Instruction architecturally executed condition code check pass unaligned load or store" "Not implemented,Implemented"
bitfld.long 0x00 14. "BR_RETURN_RETIRED,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
newline
bitfld.long 0x00 13. "BR_IMMED_RETIRED,Instruction architecturally executed immediate branch" "Not implemented,Implemented"
bitfld.long 0x00 12. "PC_WRITE_RETIRED,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
bitfld.long 0x00 11. "CID_WRITE_RETIRED,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.long 0x00 10. "EXC_RETURN,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
newline
bitfld.long 0x00 9. "EXC_TAKEN,Exception taken" "Not implemented,Implemented"
bitfld.long 0x00 8. "INST_RETIRED,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.long 0x00 7. "ST_RETIRED,Instruction architecturally executed condition check pass store" "Not implemented,Implemented"
bitfld.long 0x00 6. "LD_RETIRED,Instruction architecturally executed condition check pass load" "Not implemented,Implemented"
newline
bitfld.long 0x00 4. "L1D_CACHE,Level 1 data cache access" "Not implemented,Implemented"
bitfld.long 0x00 3. "L1D_CACHE_REFILL,Level 1 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 1. "L1I_CACHE_REFILL,Level 1 instruction cache refill" "Not implemented,Implemented"
bitfld.long 0x00 0. "SW_INCR,Software increment" "Not implemented,Implemented"
rgroup.long c15:0x07C9++0x00
line.long 0x00 "PMCEID1,Common Event Identification Register 1"
bitfld.long 0x00 19. "STALL_BACKEND,No operation issued due to backend" "Not implemented,Implemented"
bitfld.long 0x00 18. "STALL_FRONTEND,No operation issued due to the frontend" "Not implemented,Implemented"
bitfld.long 0x00 17. "BR_MIS_PRED_RETIRED,Instruction architecturally executed mispredicted branch" "Not implemented,Implemented"
bitfld.long 0x00 16. "BR_RETIRED,Instruction architecturally executed branch" "Not implemented,Implemented"
tree.end
newline
group.long c15:0x00D9++0x00
line.long 0x00 "PMCCNTR,Performance Monitor Cycle Count Register [31:0]"
group.quad c15:0x10090++0x01
line.quad 0x00 "PMCCNTR,Performance Monitor Cycle Count Register [63:0]"
if (((per.l(c15:0x05C9))&0x1F)==0x1F)
group.long c15:0x01D9++0x00
line.long 0x00 "PMXEVTYPER,Selected Event Type and Filter Register - PMCCFILTR"
bitfld.long 0x00 31. "P,Privileged modes filtering" "Disabled,Enabled"
bitfld.long 0x00 30. "U,User modes filtering" "Disabled,Enabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering" "Disabled,Enabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering" "Disabled,Enabled"
elif (((per.l(c15:0x05C9))&0x1F)<=0x03)
group.long c15:0x01D9++0x00
line.long 0x00 "PMXEVTYPER,Selected Event Type and Filter Register - PMEVTYPER"
bitfld.long 0x00 31. "P,Privileged modes filtering" "Disabled,Enabled"
bitfld.long 0x00 30. "U,User modes filtering" "Disabled,Enabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering" "Disabled,Enabled"
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering" "Disabled,Enabled"
bitfld.long 0x00 25. "MT,Multithreading" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event number"
else
rgroup.long c15:0x01D9++0x00
line.long 0x00 "PMXEVTYPER,Selected Event Type and Filter Register"
endif
group.long c15:0x02D9++0x00
line.long 0x00 "PMXEVCNTR,Selected Event Counter Register"
group.long c15:0x00E9++0x00
line.long 0x00 "PMUSERENR,User Enable Register"
bitfld.long 0x00 3. "ER,Event counter read enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CR,Cycle counter read enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,User enable" "Disabled,Enabled"
group.long c15:0x01E9++0x00
line.long 0x00 "PMINTENSET,Interrupt Enable Set Register"
bitfld.long 0x00 31. "C,CCNT overflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "P3,PMCNT3 overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "P2,PMCNT2 overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "P1,PMCNT1 overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,PMCNT0 overflow interrupt enable" "Disabled,Enabled"
group.long c15:0x02E9++0x00
line.long 0x00 "PMINTENCLR,Interrupt Enable Clear Register"
eventfld.long 0x00 31. "C,CCNT overflow interrupt enable" "Disabled,Enabled"
newline
eventfld.long 0x00 3. "P3,PMCNT3 overflow interrupt enable" "Disabled,Enabled"
eventfld.long 0x00 2. "P2,PMCNT2 overflow interrupt enable" "Disabled,Enabled"
eventfld.long 0x00 1. "P1,PMCNT1 overflow interrupt enable" "Disabled,Enabled"
eventfld.long 0x00 0. "P0,PMCNT0 overflow interrupt enable" "Disabled,Enabled"
group.long c15:0x3E9++0x00
line.long 0x00 "PMOVSSET,Performance Monitor Overflow Flag Status Set Register"
group.long c15:(0x008E+0x0)++0x00
line.long 0x00 "PMEVCNTR0,Performance Monitors Event Count Register 0"
group.long c15:(0x00CE+0x0)++0x00
line.long 0x00 "PMEVTYPER0,Performance Monitors Event Type Register 0"
group.long c15:(0x008E+0x100)++0x00
line.long 0x00 "PMEVCNTR1,Performance Monitors Event Count Register 1"
group.long c15:(0x00CE+0x100)++0x00
line.long 0x00 "PMEVTYPER1,Performance Monitors Event Type Register 1"
group.long c15:(0x008E+0x200)++0x00
line.long 0x00 "PMEVCNTR2,Performance Monitors Event Count Register 2"
group.long c15:(0x00CE+0x200)++0x00
line.long 0x00 "PMEVTYPER2,Performance Monitors Event Type Register 2"
group.long c15:(0x008E+0x300)++0x00
line.long 0x00 "PMEVCNTR3,Performance Monitors Event Count Register 3"
group.long c15:(0x00CE+0x300)++0x00
line.long 0x00 "PMEVTYPER3,Performance Monitors Event Type Register 3"
group.long c15:0x07FE++0x00
line.long 0x00 "PMCCFILTR,Performance Monitors Cycle Count Filter Register"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
tree.end
tree "System Timer Registers"
rgroup.long c15:0x000E++0x00
line.long 0x00 "CNTFRQ,Counter Frequency Register"
rgroup.quad c15:0x100E0++0x01
line.quad 0x00 "CNTPCT,Counter Physical Count Register"
rgroup.quad c15:0x110E0++0x01
line.quad 0x00 "CNTVCT,Counter Virtual Count Register"
group.quad c15:0x140E0++0x01
line.quad 0x00 "CNTVOFF,Counter Virtual Offset Register"
group.long c15:0x001E++0x00
line.long 0x00 "CNTKCTL,Timer PL1 Control Register"
bitfld.long 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 mode" "Disabled,Enabled"
bitfld.long 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 mode" "Disabled,Enabled"
bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter, when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
newline
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled"
bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 mode" "Disabled,Enabled"
group.long c15:0x401E++0x00
line.long 0x00 "CNTHCTL,Counter Non-secure PL2 Control Register"
bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTPCT is the trigger for the event stream generated from the physical counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTPCT trigger bit, defined by EVNTI" "0 to 1,1 to 0"
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the physical counter" "Disabled,Enabled"
bitfld.long 0x00 1. "EL1PCEN,Controls whether the Non-secure copies of the physical timer registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible"
newline
bitfld.long 0x00 0. "EL1PCTEN,Controls whether the physical counter, CNTPCT, is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible"
group.long c15:0x002E++0x00
line.long 0x00 "CNTP_TVAL,Counter EL1 Physical Timer Value Register"
group.long c15:0x012E++0x00
line.long 0x00 "CNTP_CTL,Counter EL1 Physical Timer Control Register"
bitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x120E0++0x01
line.quad 0x00 "CNTP_CVAL,Counter EL1 Physical Compare Value Register"
group.long c15:0x003E++0x00
line.long 0x00 "CNTV_TVAL,Counter EL1 Virtual Timer Value Register"
group.long c15:0x013E++0x00
line.long 0x00 "CNTV_CTL,Counter EL1 Virtual Timer Control Register"
bitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x130E0++0x01
line.quad 0x00 "CNTV_CVAL,Counter EL1 Virtual Compare Value Register"
group.long c15:0x402E++0x00
line.long 0x00 "CNTHP_TVAL,Counter Non-secure EL2 Physical Timer Value Register"
group.long c15:0x412E++0x00
line.long 0x00 "CNTHP_CTL,Counter Non-secure EL2 Physical Timer Control Register"
bitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x160E0++0x01
line.quad 0x00 "CNTHP_CVAL,Counter Non-secure EL2 Physical Compare Value Register"
tree.end
tree "Generic Interrupt Controller CPU Interface"
tree "AArch32 GIC Physical CPU Interface System Registers"
tree.open "Interrupt Controller Active Priorities Registers"
group.long c15:(0x048C+0x0)++0x00
line.long 0x00 "ICC_AP0R0,Interrupt Controller Active Priorities Group 0x0 Register"
bitfld.long 0x00 31. "P[31],Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P[30],Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P[29],Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.long 0x00 28. "P[28],Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
newline
bitfld.long 0x00 27. "P[27],Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P[26],Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.long 0x00 25. "P[25],Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P[24],Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. "P[23],Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.long 0x00 22. "P[22],Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P[21],Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P[20],Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P[19],Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[18],Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P[17],Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
bitfld.long 0x00 16. "P[16],Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
newline
bitfld.long 0x00 15. "P[15],Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P[14],Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "P[13],Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P[12],Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. "P[11],Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "P[10],Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P[9],Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P[8],Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P[7],Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P[6],Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P[5],Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "P[4],Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "P[3],Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P[2],Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "P[1],Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P[0],Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.long c15:(0x048C+0xFFFFFFFFFFFFFC10)++0x00
line.long 0x00 "ICC_AP1R0,Interrupt Controller Active Priorities Group 0xFFFFFFFFFFFFFC10 Register"
bitfld.long 0x00 31. "P[31],Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P[30],Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P[29],Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.long 0x00 28. "P[28],Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
newline
bitfld.long 0x00 27. "P[27],Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P[26],Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.long 0x00 25. "P[25],Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P[24],Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. "P[23],Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.long 0x00 22. "P[22],Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P[21],Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P[20],Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P[19],Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[18],Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P[17],Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
bitfld.long 0x00 16. "P[16],Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
newline
bitfld.long 0x00 15. "P[15],Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P[14],Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "P[13],Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P[12],Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. "P[11],Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "P[10],Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P[9],Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P[8],Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P[7],Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P[6],Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P[5],Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "P[4],Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "P[3],Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P[2],Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "P[1],Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P[0],Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
group.long c15:(0x038C+0x0)++0x00
line.long 0x00 "ICC_BPR0,Interrupt Controller Binary Point Register 0"
bitfld.long 0x00 0.--2. "BINARYPOINT,5-bit interrupt priority field control" "Reserved,Reserved,2,3,4,5,6,7"
group.long c15:(0x038C+0x40)++0x00
line.long 0x00 "ICC_BPR1,Interrupt Controller Binary Point Register 1"
bitfld.long 0x00 0.--2. "BINARYPOINT,5-bit interrupt priority field control" "Reserved,Reserved,2,3,4,5,6,7"
group.long c15:0x04CC++0x00
line.long 0x00 "ICC_CTLR,Interrupt Control Register for EL1"
rbitfld.long 0x00 15. "A3V,Affinity 3 valid" "Not supported,?..."
rbitfld.long 0x00 14. "SEIS,SEI support" "Not supported,?..."
rbitfld.long 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,?..."
newline
rbitfld.long 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..."
bitfld.long 0x00 1. "EOIMODE,Alias of ICC_MCTLR.EOImode_EL1" "0,1"
bitfld.long 0x00 0. "CBPR,Common binary point register" "0,1"
wgroup.long c15:0x01BC++0x00
line.long 0x00 "ICC_DIR,Interrupt Controller Deactivate Interrupt Register"
hexmask.long.word 0x00 0.--9. 1. "INTID,Interrupt ID"
wgroup.long c15:(0x018C+0x0)++0x00
line.long 0x00 "ICC_EOIR0,Interrupt Controller End Of Interrupt Register 0"
hexmask.long.word 0x00 0.--9. 1. "INTID,INTID from the corresponding ICC_IAR0 access"
rgroup.long c15:(0x028C+0x0)++0x00
line.long 0x00 "ICC_HPPIR0,Interrupt Controller Highest Priority Pending Interrupt Register 0"
hexmask.long.word 0x00 0.--9. 1. "INTID,INTID of the highest priority pending Group 0 interrupt"
rgroup.long c15:(0x008C+0x0)++0x00
line.long 0x00 "ICC_IAR0,Interrupt Controller Interrupt Acknowledge Register 0"
hexmask.long.word 0x00 0.--9. 1. "INTID,INTID of the signaled interrupt"
group.long c15:(0x06CC+0x0)++0x00
line.long 0x00 "ICC_IGRPEN0,Interrupt Controller Group Enable Register 0"
bitfld.long 0x00 0. "ENABLE,Enable group 0 interrupts" "Disabled,Enabled"
wgroup.long c15:(0x018C+0x40)++0x00
line.long 0x00 "ICC_EOIR1,Interrupt Controller End Of Interrupt Register 1"
hexmask.long.word 0x00 0.--9. 1. "INTID,INTID from the corresponding ICC_IAR0 access"
rgroup.long c15:(0x028C+0x40)++0x00
line.long 0x00 "ICC_HPPIR1,Interrupt Controller Highest Priority Pending Interrupt Register 1"
hexmask.long.word 0x00 0.--9. 1. "INTID,INTID of the highest priority pending Group 1 interrupt"
rgroup.long c15:(0x008C+0x40)++0x00
line.long 0x00 "ICC_IAR1,Interrupt Controller Interrupt Acknowledge Register 1"
hexmask.long.word 0x00 0.--9. 1. "INTID,INTID of the signaled interrupt"
group.long c15:(0x06CC+0x100)++0x00
line.long 0x00 "ICC_IGRPEN1,Interrupt Controller Group Enable Register 1"
bitfld.long 0x00 0. "ENABLE,Enable group 1 interrupts" "Disabled,Enabled"
group.long c15:0x0064++0x00
line.long 0x00 "ICC_PMR,Interrupt Controller Interrupt Priority Mask Register"
bitfld.long 0x00 3.--7. "PRIORITY,The priority mask level for the CPU interface" "Highest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,Lowest"
rgroup.long c15:0x03BC++0x00
line.long 0x00 "ICC_RPR,Interrupt Controller Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface"
wgroup.quad c15:(0x120C0-0x0)++0x01
line.quad 0x00 "ICC_SGI0R,SGI Generation Register 0"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
bitfld.quad 0x00 0.--4. "TARGETLIST,Target list" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
wgroup.quad c15:(0x120C0-0x2000)++0x01
line.quad 0x00 "ICC_SGI1R,SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
bitfld.quad 0x00 0.--4. "TARGETLIST,Target list" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
wgroup.quad c15:0x110C0++0x01
line.quad 0x00 "ICC_ASGI1R,Alias SGI Generation Register $2"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
bitfld.quad 0x00 0.--4. "TARGETLIST,Target list" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long c15:0x05CC++0x00
line.long 0x00 "ICC_SRE,System Register Enable Register for EL1"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "Reserved,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "Reserved,Yes"
bitfld.long 0x00 0. "SRE,System register enable" "Reserved,Enabled"
group.long c15:0x459C++0x00
line.long 0x00 "ICC_HSRE,System Register Enable Register for EL2"
bitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1" "Reserved,Enabled"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "Reserved,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "Reserved,Yes"
newline
bitfld.long 0x00 0. "SRE,System register enable" "Reserved,Enabled"
tree.end
tree "AArch32 GIC Virtual CPU Interface System Registers"
tree.open "Interrupt Controller Active Priorities Registers"
group.long c15:(0x048C+0x0)++0x00
line.long 0x00 "ICV_AP0R0,Interrupt Controller Virtual Active Priorities Group 0x0 Register 0"
bitfld.long 0x00 31. "P[31],Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P[30],Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P[29],Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.long 0x00 28. "P[28],Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
newline
bitfld.long 0x00 27. "P[27],Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P[26],Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.long 0x00 25. "P[25],Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P[24],Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. "P[23],Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.long 0x00 22. "P[22],Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P[21],Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P[20],Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P[19],Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[18],Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P[17],Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
bitfld.long 0x00 16. "P[16],Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
newline
bitfld.long 0x00 15. "P[15],Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P[14],Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "P[13],Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P[12],Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. "P[11],Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "P[10],Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P[9],Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P[8],Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P[7],Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P[6],Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P[5],Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "P[4],Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "P[3],Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P[2],Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "P[1],Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P[0],Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.long c15:(0x048C+0xFFFFFFFFFFFFFC10)++0x00
line.long 0x00 "ICV_AP1R0,Interrupt Controller Virtual Active Priorities Group 0xFFFFFFFFFFFFFC10 Register 0"
bitfld.long 0x00 31. "P[31],Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P[30],Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P[29],Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.long 0x00 28. "P[28],Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
newline
bitfld.long 0x00 27. "P[27],Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P[26],Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.long 0x00 25. "P[25],Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P[24],Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. "P[23],Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.long 0x00 22. "P[22],Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P[21],Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P[20],Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P[19],Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[18],Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P[17],Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
bitfld.long 0x00 16. "P[16],Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
newline
bitfld.long 0x00 15. "P[15],Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P[14],Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "P[13],Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P[12],Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. "P[11],Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "P[10],Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P[9],Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P[8],Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P[7],Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P[6],Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P[5],Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "P[4],Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "P[3],Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P[2],Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "P[1],Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P[0],Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
group.long c15:0x04CC++0x00
line.long 0x00 "ICV_CTLR,Interrupt Controller Virtual Control Register"
rbitfld.long 0x00 15. "A3V,Affinity 3 valid" "Not supported,?..."
rbitfld.long 0x00 14. "SEIS,SEI support" "Not supported,?..."
rbitfld.long 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,?..."
newline
rbitfld.long 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "Reserved,Reserved,Reserved,Reserved,5,?..."
bitfld.long 0x00 1. "EOIMODE,Alias of ICC_MCTLR.EOImode_EL1" "0,1"
bitfld.long 0x00 0. "CBPR,Common binary point register" "0,1"
wgroup.long c15:0x01BC++0x00
line.long 0x00 "ICV_DIR,Interrupt Controller Virtual Deactivate Interrupt Register"
hexmask.long.word 0x00 0.--15. 1. "INTID,Interrupt ID"
hgroup.long c15:(0x008C+0x0)++0x00
hide.long 0x00 "ICV_IAR0,Interrupt Controller Vitrtual Interrupt Acknowledge Register 0"
wgroup.long c15:(0x018C+0x0)++0x00
line.long 0x00 "ICV_EOIR0,Interrupt Controller Vitrtual End Of Interrupt Register 0"
hexmask.long.word 0x00 0.--15. 1. "INTID,INTID from the corresponding ICC_IAR0 access"
rgroup.long c15:(0x028C+0x0)++0x00
line.long 0x00 "ICV_HPPIR0,Interrupt Controller Vitrtual Highest Priority Pending Interrupt Register 0"
hexmask.long.word 0x00 0.--15. 1. "INTID,INTID of the highest priority pending Group 0 interrupt"
group.long c15:(0x038C+0x0)++0x00
line.long 0x00 "ICV_BPR0,Interrupt Controller Vitrtual Binary Point Register 0"
bitfld.long 0x00 0.--2. "BINARYPOINT,5-bit interrupt priority field control" "Reserved,Reserved,2,3,4,5,6,7"
hgroup.long c15:(0x008C+0x40)++0x00
hide.long 0x00 "ICV_IAR1,Interrupt Controller Vitrtual Interrupt Acknowledge Register 1"
wgroup.long c15:(0x018C+0x40)++0x00
line.long 0x00 "ICV_EOIR1,Interrupt Controller Vitrtual End Of Interrupt Register 1"
hexmask.long.word 0x00 0.--15. 1. "INTID,INTID from the corresponding ICC_IAR1 access"
rgroup.long c15:(0x028C+0x40)++0x00
line.long 0x00 "ICV_HPPIR1,Interrupt Controller Vitrtual Highest Priority Pending Interrupt Register 1"
hexmask.long.word 0x00 0.--15. 1. "INTID,INTID of the highest priority pending Group 1 interrupt"
group.long c15:(0x038C+0x40)++0x00
line.long 0x00 "ICV_BPR1,Interrupt Controller Vitrtual Binary Point Register 1"
bitfld.long 0x00 0.--2. "BINARYPOINT,5-bit interrupt priority field control" "Reserved,Reserved,2,3,4,5,6,7"
group.long c15:0x07CC++0x00
line.long 0x00 "ICV_IGRPEN1,Interrupt Controller Virtual Group Enable Register 1"
bitfld.long 0x00 0. "ENABLE,Enable group 1 interrupts" "Disabled,Enabled"
group.long c15:0x06CC++0x00
line.long 0x00 "ICV_IGRPEN0,Interrupt Controller Virtual Interrupt Group 0 Enable Register"
bitfld.long 0x00 0. "ENABLE,Enable group 0 interrupts" "Disabled,Enabled"
group.long c15:0x0064++0x00
line.long 0x00 "ICV_PMR,Interrupt Controller Virtual Interrupt Priority Mask Register"
bitfld.long 0x00 3.--7. "PRIORITY,The priority mask level for the CPU interface" "Highest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,Lowest"
rgroup.long c15:0x03BC++0x00
line.long 0x00 "ICV_RPR,Interrupt Controller Virtual Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface"
tree.end
tree "AArch32 Virtual Interface Control System Registers"
tree.open "Interrupt Controller Hypervisor Active Priorities Register"
group.long c15:0x408C++0x00
line.long 0x00 "ICH_AP0R0,Interrupt Controller Hypervisor Active Priorities Group 0 Register 0"
bitfld.long 0x00 31. "P[31],Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P[30],Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P[29],Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.long 0x00 28. "P[28],Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
newline
bitfld.long 0x00 27. "P[27],Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P[26],Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.long 0x00 25. "P[25],Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P[24],Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. "P[23],Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.long 0x00 22. "P[22],Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P[21],Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P[20],Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P[19],Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[18],Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P[17],Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
bitfld.long 0x00 16. "P[16],Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
newline
bitfld.long 0x00 15. "P[15],Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P[14],Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "P[13],Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P[12],Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. "P[11],Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "P[10],Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P[9],Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P[8],Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P[7],Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P[6],Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P[5],Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "P[4],Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "P[3],Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P[2],Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "P[1],Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P[0],Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.long c15:0x409C++0x00
line.long 0x00 "ICH_AP1R0,Interrupt Controller Hypervisor Active Priorities Group 1 Register 0"
bitfld.long 0x00 31. "P[31],Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P[30],Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P[29],Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.long 0x00 28. "P[28],Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
newline
bitfld.long 0x00 27. "P[27],Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P[26],Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.long 0x00 25. "P[25],Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P[24],Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
newline
bitfld.long 0x00 23. "P[23],Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.long 0x00 22. "P[22],Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P[21],Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P[20],Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P[19],Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[18],Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P[17],Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
bitfld.long 0x00 16. "P[16],Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
newline
bitfld.long 0x00 15. "P[15],Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P[14],Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "P[13],Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P[12],Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.long 0x00 11. "P[11],Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "P[10],Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P[9],Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P[8],Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P[7],Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P[6],Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P[5],Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "P[4],Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "P[3],Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P[2],Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "P[1],Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P[0],Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
group.long c15:0x40BC++0x00
line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register"
bitfld.long 0x00 27.--31. "EOICOUNT,Number of successful write to a virtual EOIR or DIR resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 14. "TDIR,Trap virtual EL1 writes to ICC_DIR" "Not trapped,Trapped"
bitfld.long 0x00 12. "TALL1,Trap all virtual EL1 accesses to ICC_* system registers for Group 1 interrupts to EL2" "Not trapped,Trapped"
newline
bitfld.long 0x00 11. "TALL0,Trap all virtual EL1 accesses to ICC_* system registers for Group 0 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 10. "TC,Trap all virtual EL1 accesses to system registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped"
bitfld.long 0x00 7. "VGRP1DIE,VM group 1 disabled interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "VGRP1EIE,VM group 1 enabled interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "VGRP0DIE,VM group 0 disabled interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "VGRP0EIE,VM group 0 enabled interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "NPIE,No pending interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "LRENPIE,List register entry not present interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "UIE,Underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled"
rgroup.long c15:0x41BC++0x00
line.long 0x00 "ICH_VTR,Interrupt Controller Hypervisor Control VGIC Type Register"
bitfld.long 0x00 29.--31. "PRIBITS,Priority bits" "Reserved,Reserved,Reserved,Reserved,5,?..."
bitfld.long 0x00 26.--28. "PREBITS,Preemption bits" "Reserved,Reserved,Reserved,Reserved,5,?..."
bitfld.long 0x00 23.--25. "IDBITS,The number of virtual interrupt identifier bits supported" "16 bits,?..."
bitfld.long 0x00 22. "SEIS,SEI Support" "Not supported,?..."
newline
bitfld.long 0x00 21. "A3V,Affinity 3 support" "Not supported,?..."
bitfld.long 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Reserved,Not supported"
bitfld.long 0x00 19. "TDS,Separate trapping EL1 writes to ICV_DIR supported" "Reserved,Supported"
bitfld.long 0x00 0.--4. "LISTREGS,The number of implemented List registers" "Reserved,Reserved,Reserved,4,?..."
rgroup.long c15:0x42BC++0x00
line.long 0x00 "ICH_MISR,Interrupt Controller Maintenance Interrupt Status Register"
bitfld.long 0x00 7. "VGRP1D,vPE group 1 disabled" "No,Yes"
bitfld.long 0x00 6. "VGRP1E,vPE group 1 enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "VGRP0D,vPE group 0 disabled" "No,Yes"
bitfld.long 0x00 4. "VGRP0E,vPE group 0 enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "NP,No pending maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 2. "LRENP,List register entry not present" "Not present,Present"
bitfld.long 0x00 1. "U,Underflow assertion" "Not asserted,Asserted"
bitfld.long 0x00 0. "EOI,End of interrupt assertion" "Not asserted,Asserted"
rgroup.long c15:0x43BC++0x00
line.long 0x00 "ICH_EISR,Interrupt Controller End of Interrupt Status Register"
bitfld.long 0x00 3. "STATUS[3],EOI maintenance interrupt status bit for List (ICH_LR3) register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "STATUS[2],EOI maintenance interrupt status bit for List (ICH_LR2) register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "STATUS[1],EOI maintenance interrupt status bit for List (ICH_LR1) register 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "STATUS[0],EOI maintenance interrupt status bit for List (ICH_LR0) register 0" "No interrupt,Interrupt"
group.long c15:0x47BC++0x00
line.long 0x00 "ICH_VMCR,Interrupt Controller Virtual Machine Control Register"
bitfld.long 0x00 27.--31. "VPMR,Virtual priority mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 21.--23. "VBPR0,Virtual binary point register for group 0" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 18.--20. "VBPR1,Virtual binary point register for group 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 9. "VEOIM,Virtual EOI mode" "Drop & interrupt,Drop"
newline
bitfld.long 0x00 4. "VCBPR,Virtual common binary point register" "Separate,Both"
bitfld.long 0x00 1. "VENG1,Virtual group 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VENG0,Virtual group 0 interrupt enable" "Disabled,Enabled"
rgroup.long c15:0x45BC++0x00
line.long 0x00 "ICH_ELRSR,Interrupt Controller Empty List Register Status Register"
bitfld.long 0x00 3. "STATUS[3],Status bit for list (ICH_LR3) register 3" "Interrupt,No interrupt"
bitfld.long 0x00 2. "STATUS[2],Status bit for list (ICH_LR2) register 2" "Interrupt,No interrupt"
bitfld.long 0x00 1. "STATUS[1],Status bit for list (ICH_LR1) register 1" "Interrupt,No interrupt"
bitfld.long 0x00 0. "STATUS[0],Status bit for list (ICH_LR0) register 0" "Interrupt,No interrupt"
group.long c15:(0x40CC+0x0)++0x00
line.long 0x00 "ICH_LR0,Interrupt Controller List Register 0"
hexmask.long.word 0x00 0.--15. 1. "VINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x100)++0x00
line.long 0x00 "ICH_LR1,Interrupt Controller List Register 1"
hexmask.long.word 0x00 0.--15. 1. "VINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x200)++0x00
line.long 0x00 "ICH_LR2,Interrupt Controller List Register 2"
hexmask.long.word 0x00 0.--15. 1. "VINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x300)++0x00
line.long 0x00 "ICH_LR3,Interrupt Controller List Register 3"
hexmask.long.word 0x00 0.--15. 1. "VINTID,Virtual INTID of the interrupt"
if (((per.l(c15:0x40EC+0x0))&0x20000000)==0x00)
group.long c15:(0x40EC+0x0)++0x00
line.long 0x00 "ICH_LRC0,Interrupt Controller List Register 0"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 9. "EOI,End of interrupt" "Not EOI,EOI"
else
group.long c15:(0x40EC+0x0)++0x00
line.long 0x00 "ICH_LRC0,Interrupt Controller List Register 0"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
endif
if (((per.l(c15:0x40EC+0x100))&0x20000000)==0x00)
group.long c15:(0x40EC+0x100)++0x00
line.long 0x00 "ICH_LRC1,Interrupt Controller List Register 1"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 9. "EOI,End of interrupt" "Not EOI,EOI"
else
group.long c15:(0x40EC+0x100)++0x00
line.long 0x00 "ICH_LRC1,Interrupt Controller List Register 1"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
endif
if (((per.l(c15:0x40EC+0x200))&0x20000000)==0x00)
group.long c15:(0x40EC+0x200)++0x00
line.long 0x00 "ICH_LRC2,Interrupt Controller List Register 2"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 9. "EOI,End of interrupt" "Not EOI,EOI"
else
group.long c15:(0x40EC+0x200)++0x00
line.long 0x00 "ICH_LRC2,Interrupt Controller List Register 2"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
endif
if (((per.l(c15:0x40EC+0x300))&0x20000000)==0x00)
group.long c15:(0x40EC+0x300)++0x00
line.long 0x00 "ICH_LRC3,Interrupt Controller List Register 3"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 9. "EOI,End of interrupt" "Not EOI,EOI"
else
group.long c15:(0x40EC+0x300)++0x00
line.long 0x00 "ICH_LRC3,Interrupt Controller List Register 3"
bitfld.long 0x00 30.--31. "STATE,Interrupt state" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Virtual interrupt maps directly to a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 28. "GROUP,Group for this virtual interrupt" "Group 0,Group 1"
newline
bitfld.long 0x00 19.--23. "PRIORITY,Priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
endif
tree.end
tree.end
tree "Debug Registers"
tree "Coresight Management Registers"
rgroup.long c14:0x0000++0x00
line.long 0x00 "DBGDIDR,Debug ID Register"
bitfld.long 0x00 28.--31. "WRP,Number of watchpoint register pairs" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,8,?..."
bitfld.long 0x00 24.--27. "BRP,Number of breakpoint register pairs" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,8,?..."
newline
bitfld.long 0x00 20.--23. "CTX_CMP,Number of BRPs with context ID comparison capability" "Reserved,2,?..."
bitfld.long 0x00 16.--19. "VERSION,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8,?..."
newline
bitfld.long 0x00 14. "NSUHD_IMP,Secure user halting debug-mode" "Not supported,?..."
bitfld.long 0x00 12. "SE_IMP,Security extensions implemented" "Not implemented,?..."
rgroup.long c14:0x0060++0x00
line.long 0x00 "DBGWFAR,Debug Watchpoint Fault Address Register"
group.long c14:0x0070++0x00
line.long 0x00 "DBGVCR,Debug Vector Catch Register"
bitfld.long 0x00 7. "FIQVCE,FIQ vector catch enable" "Disabled,Enabled"
bitfld.long 0x00 6. "IRQVCE,IRQ vector catch enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "DAVCE,Data abort vector catch enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PAVCE,Prefetch abort vector catch enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "SVCVCE,Supervisor call (SVC) vector catch enable" "Disabled,Enabled"
bitfld.long 0x00 1. "UIVCE,Undefined instruction vector catch enable" "Disabled,Enabled"
group.long c14:0x0200++0x00
line.long 0x00 "DBGDTRRXEXT,Debug Receive Register (External View)"
rgroup.long c14:0x0050++0x00
line.long 0x00 "DBGDTRRXINT,Debug Receive Register (Internal View)"
group.long c14:0x0020++0x00
line.long 0x00 "DBGDCCINT,Debug Comms Channel Interrupt Enable Register"
bitfld.long 0x00 30. "RX,DCC interrupt enable controls" "Disabled,Enabled"
bitfld.long 0x00 29. "TX,DCC interrupt enable controls" "Disabled,Enabled"
rgroup.long c14:0x0010++0x00
line.long 0x00 "DBGDSCRINT,Debug Status and Control Register (Internal View)"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX register full" "Empty,Full"
newline
bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure"
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "UDCCDIS,User mode access to communications channel disable" "No,Yes"
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,Software breakpoint (BKPT),Reserved,Vector catch,Reserved,Reserved,Reserved,Reserved,Watchpoint,?..."
if (((per.l(c14:0x0411))&0x02)==0x02)
group.long c14:0x0220++0x00
line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX register full" "Empty,Full"
newline
bitfld.long 0x00 27. "RXO,DBGDTRRX overflow" "No overflow,Overflow"
bitfld.long 0x00 26. "TXU,DBGDTRTX underflow" "No underflow,Underflow"
newline
bitfld.long 0x00 22.--23. "INTDIS,Interrupt disable" "Don't disable interrupts,Disable interrupts targeting non-sec EL1,Disable interrupts targeting EL1 & EL2,Disable all interrupts"
bitfld.long 0x00 21. "TDA,Trap debug register access" "Not trapped,Trapped"
newline
rbitfld.long 0x00 18. "NS,Non-secure status bit" "Reserved,Non-secure"
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14. "HDE,Halting debug-mode" "Disabled,Enabled"
bitfld.long 0x00 12. "UDCCDIS,User mode access to communications channel disable" "No,Yes"
newline
bitfld.long 0x00 6. "ERR,Cummulative error flag" "Not error,Error"
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,Software breakpoint (BKPT),Reserved,Vector catch,Reserved,Reserved,Reserved,Reserved,Watchpoint,?..."
else
group.long c14:0x0220++0x00
line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)"
rbitfld.long 0x00 30. "RXFULL,DBGDTRRX register full" "Empty,Full"
rbitfld.long 0x00 29. "TXFULL,DBGDTRTX register full" "Empty,Full"
newline
rbitfld.long 0x00 27. "RXO,DBGDTRRX overflow" "No overflow,Overflow"
rbitfld.long 0x00 26. "TXU,DBGDTRTX underflow" "No underflow,Underflow"
newline
rbitfld.long 0x00 22.--23. "INTDIS,Interrupt disable" "Don't disable interrupts,Disable interrupts targeting non-sec EL1,Disable interrupts targeting EL1 & EL2,Disable all interrupts"
rbitfld.long 0x00 21. "TDA,Trap debug register access" "Not trapped,Trapped"
newline
rbitfld.long 0x00 18. "NS,Non-secure status bit" "Reserved,Non-secure"
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 14. "HDE,Halting debug-mode" "Disabled,Enabled"
bitfld.long 0x00 12. "UDCCDIS,User mode access to communications channel disable" "No,Yes"
newline
rbitfld.long 0x00 6. "ERR,Cummulative error flag" "Not error,Error"
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,Software breakpoint (BKPT),Reserved,Vector catch,Reserved,Reserved,Reserved,Reserved,Watchpoint,?..."
endif
group.long c14:0x0230++0x00
line.long 0x00 "DBGDTRTXEXT,Debug Transmit Register (External View)"
if (((per.l(c14:0x0411))&0x02)==0x02)
group.long c14:0x0260++0x00
line.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register"
else
rgroup.long c14:0x0260++0x00
line.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register"
endif
wgroup.long c14:0x0050++0x00
line.long 0x00 "DBGDTRTXINT,Debug Transmit Register (Internal View)"
rgroup.long c14:0x0707++0x00
line.long 0x00 "DBGDEVID2,Debug Device ID Register 2"
rgroup.long c14:0x0717++0x00
line.long 0x00 "DBGDEVID1,Debug Device ID Register 1"
bitfld.long 0x00 0.--3. "PCSROFFSET,PC samples returned offset" "Reserved,Reserved,No offset,?..."
rgroup.long c14:0x0727++0x00
line.long 0x00 "DBGDEVID0,Debug Device ID Register 0"
bitfld.long 0x00 28.--31. "CIDMASK,Level of support for the context ID matching breakpoint masking capability." "Not implemented,?..."
bitfld.long 0x00 24.--27. "AR,Debug external auxiliary control register support status" "Not supported,?..."
newline
bitfld.long 0x00 20.--23. "DL,Support for debug OS double lock register" "Reserved,Supported,?..."
bitfld.long 0x00 16.--19. "VE,Specifies implementation of virtualization extension" "Reserved,Implemented,?..."
newline
bitfld.long 0x00 12.--15. "VC,Form of the vector catch event implemented" "Implemented,?..."
bitfld.long 0x00 8.--11. "BPAM,Level of support for immediate virtual address matching breakpoint masking capability" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented"
newline
bitfld.long 0x00 4.--7. "WPAM,Level of support for the DVA matching watchpoint masking capability" "Reserved,Implemented,?..."
bitfld.long 0x00 0.--3. "PCS,Level of support for program counter sampling using debug registers 40 and 43" "Reserved,Reserved,Reserved,Implemented,?..."
newline
tree.end
rgroup.long c14:0x0001++0x00
line.long 0x00 "DBGDRAR,Debug ROM Address Register"
hexmask.long 0x00 12.--31. 0x1000 "ROMADDR,ROM physical address"
newline
bitfld.long 0x00 0. "VALID,ROM table address valid" "Not valid,Valid"
rgroup.long c14:0x0002++0x00
line.long 0x00 "DBGDSAR,Debug Self Address Register"
wgroup.long c14:0x0401++0x00
line.long 0x00 "DBGOSLAR,Operating System Lock Access Register"
rgroup.long c14:0x0411++0x00
line.long 0x00 "DBGOSLSR,Operating System Lock Status Register"
bitfld.long 0x00 2. "NTT,32-bit access" "Not required,Required"
bitfld.long 0x00 1. "OSLK,Status of the OS Lock" "Not locked,Locked"
newline
bitfld.long 0x00 0. 3. "OSLM,OS Lock Model implemented Bit" "Reserved,Reserved,Implemented,?..."
group.long c14:0x0431++0x00
line.long 0x00 "DBGOSDLR,OS Double-lock Register"
bitfld.long 0x00 0. "DLK,OS double-lock control" "Not locked,Locked"
group.long c14:0x0441++0x00
line.long 0x00 "DBGPRCR,Device Power-Down and Reset Control Register"
bitfld.long 0x00 0. "CORENPDRQ,Core No Power down Request" "Powered down,Emulated"
group.long c14:0x0687++0x00
line.long 0x00 "DBGCLAIMSET,Debug Claim Tag Set Register"
bitfld.long 0x00 7. "CT7,Claim Tag 7 Set" "Not set,Set"
bitfld.long 0x00 6. "CT6,Claim Tag 6 Set" "Not set,Set"
newline
bitfld.long 0x00 5. "CT5,Claim Tag 5 Set" "Not set,Set"
bitfld.long 0x00 4. "CT4,Claim Tag 4 Set" "Not set,Set"
newline
bitfld.long 0x00 3. "CT3,Claim Tag 3 Set" "Not set,Set"
bitfld.long 0x00 2. "CT2,Claim Tag 2 Set" "Not set,Set"
newline
bitfld.long 0x00 1. "CT1,Claim Tag 1 Set" "Not set,Set"
bitfld.long 0x00 0. "CT0,Claim Tag 0 Set" "Not set,Set"
group.long c14:0x0697++0x00
line.long 0x00 "DBGCLAIMCLR,Debug Claim Tag Clear Register"
bitfld.long 0x00 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared"
bitfld.long 0x00 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x00 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared"
bitfld.long 0x00 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x00 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared"
bitfld.long 0x00 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x00 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared"
bitfld.long 0x00 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared"
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Debug Authentication Status Register"
bitfld.long 0x00 10.--11. "HNID,Hyp non-invasive debug" "Reserved,Reserved,Disabled,Enabled"
bitfld.long 0x00 8.--9. "HID,Hyp invasive debug"  "Reserved,Reserved,Disabled,Enabled"
newline
bitfld.long 0x00 6.--7. "SNID,Secure non-invasive debug" "Not implemented,?..."
bitfld.long 0x00 4.--5. "SID,Secure invasive debug" "Not implemented,?..."
newline
bitfld.long 0x00 2.--3. "NSNID,Non-secure non-invasive debug" "Reserved,Reserved,Disabled,Enabled"
bitfld.long 0x00 0.--1. "NSID,Non-secure invasive debug" "Reserved,Reserved,Disabled,Enabled"
rgroup.long c14:0x7000++0x00 "Jazelle Registers"
line.long 0x00 "JIDR,Jazelle ID Register"
rgroup.long c14:0x7001++0x00
line.long 0x00 "JOSCR,Jazelle OS Control Register"
rgroup.long c14:0x7002++0x00
line.long 0x00 "JMCR,Jazelle Main Configuration Register"
tree.end
tree "Breakpoint Registers"
tree "Breakpoint 0"
if (((per.l(c14:0x0500+0x0))&0xA00000)==0x0)
group.long c14:(0x0400+0x0)++0x00
line.long 0x00 "DBGBVR0,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x0))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x0)++0x00
line.long 0x00 "DBGBVR0,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x0)++0x00
line.long 0x00 "DBGBVR0,Debug Breakpoint Value Register"
endif
if ((per.l(c14:0x0500+0x0)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x0)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x0)++0x00
line.long 0x00 "DBGBCR0,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x0)&0xC000)==0x8000)
group.long c14:(0x0500+0x0)++0x00
line.long 0x00 "DBGBCR0,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x0)++0x00
line.long 0x00 "DBGBCR0,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x0)++0x00
line.long 0x00 "DBGBCR0,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 1"
if (((per.l(c14:0x0500+0x10))&0xA00000)==0x0)
group.long c14:(0x0400+0x10)++0x00
line.long 0x00 "DBGBVR1,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x10))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x10)++0x00
line.long 0x00 "DBGBVR1,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x10)++0x00
line.long 0x00 "DBGBVR1,Debug Breakpoint Value Register"
endif
if ((per.l(c14:0x0500+0x10)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x10)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x10)++0x00
line.long 0x00 "DBGBCR1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x10)&0xC000)==0x8000)
group.long c14:(0x0500+0x10)++0x00
line.long 0x00 "DBGBCR1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x10)++0x00
line.long 0x00 "DBGBCR1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x10)++0x00
line.long 0x00 "DBGBCR1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 2"
if (((per.l(c14:0x0500+0x20))&0xA00000)==0x0)
group.long c14:(0x0400+0x20)++0x00
line.long 0x00 "DBGBVR2,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x20))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x20)++0x00
line.long 0x00 "DBGBVR2,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x20)++0x00
line.long 0x00 "DBGBVR2,Debug Breakpoint Value Register"
endif
if ((per.l(c14:0x0500+0x20)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x20)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x20)++0x00
line.long 0x00 "DBGBCR2,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x20)&0xC000)==0x8000)
group.long c14:(0x0500+0x20)++0x00
line.long 0x00 "DBGBCR2,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x20)++0x00
line.long 0x00 "DBGBCR2,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x20)++0x00
line.long 0x00 "DBGBCR2,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 3"
if (((per.l(c14:0x0500+0x30))&0xA00000)==0x0)
group.long c14:(0x0400+0x30)++0x00
line.long 0x00 "DBGBVR3,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x30))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x30)++0x00
line.long 0x00 "DBGBVR3,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x30)++0x00
line.long 0x00 "DBGBVR3,Debug Breakpoint Value Register"
endif
if ((per.l(c14:0x0500+0x30)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x30)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x30)++0x00
line.long 0x00 "DBGBCR3,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x30)&0xC000)==0x8000)
group.long c14:(0x0500+0x30)++0x00
line.long 0x00 "DBGBCR3,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x30)++0x00
line.long 0x00 "DBGBCR3,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x30)++0x00
line.long 0x00 "DBGBCR3,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 4"
if (((per.l(c14:0x0500+0x40))&0xA00000)==0x0)
group.long c14:(0x0400+0x40)++0x00
line.long 0x00 "DBGBVR4,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x40))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x40)++0x00
line.long 0x00 "DBGBVR4,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x40)++0x00
line.long 0x00 "DBGBVR4,Debug Breakpoint Value Register"
endif
if ((per.l(c14:0x0500+0x40)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x40)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x40)++0x00
line.long 0x00 "DBGBCR4,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x40)&0xC000)==0x8000)
group.long c14:(0x0500+0x40)++0x00
line.long 0x00 "DBGBCR4,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x40)++0x00
line.long 0x00 "DBGBCR4,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x40)++0x00
line.long 0x00 "DBGBCR4,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 5"
if (((per.l(c14:0x0500+0x50))&0xA00000)==0x0)
group.long c14:(0x0400+0x50)++0x00
line.long 0x00 "DBGBVR5,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x50))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x50)++0x00
line.long 0x00 "DBGBVR5,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x50)++0x00
line.long 0x00 "DBGBVR5,Debug Breakpoint Value Register"
endif
if ((per.l(c14:0x0500+0x50)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x50)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x50)++0x00
line.long 0x00 "DBGBCR5,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x50)&0xC000)==0x8000)
group.long c14:(0x0500+0x50)++0x00
line.long 0x00 "DBGBCR5,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x50)++0x00
line.long 0x00 "DBGBCR5,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x50)++0x00
line.long 0x00 "DBGBCR5,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 6"
if (((per.l(c14:0x0500+0x60))&0xA00000)==0x0)
group.long c14:(0x0400+0x60)++0x00
line.long 0x00 "DBGBVR6,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x60))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x60)++0x00
line.long 0x00 "DBGBVR6,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x60)++0x00
line.long 0x00 "DBGBVR6,Debug Breakpoint Value Register"
endif
group.long c14:(0x0101+0x60)++0x00
line.long 0x00 "DBGBXVR6,Breakpoint Extended Value Register"
hexmask.long.byte 0x00 0.--7. 1. "VMID,VMID value for comparison"
if ((per.l(c14:0x0500+0x60)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x60)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x60)++0x00
line.long 0x00 "DBGBCR6,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x60)&0xC000)==0x8000)
group.long c14:(0x0500+0x60)++0x00
line.long 0x00 "DBGBCR6,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x60)++0x00
line.long 0x00 "DBGBCR6,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x60)++0x00
line.long 0x00 "DBGBCR6,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 7"
if (((per.l(c14:0x0500+0x70))&0xA00000)==0x0)
group.long c14:(0x0400+0x70)++0x00
line.long 0x00 "DBGBVR7,Debug Breakpoint Value Register"
hexmask.long 0x0 2.--31. 0x4 "VA,Address Value for comparison bits (31:2)"
elif (((per.l(c14:0x0500+0x70))&0xA00000)==(0xA00000||0x200000))
group.long c14:(0x0400+0x70)++0x00
line.long 0x00 "DBGBVR7,Debug Breakpoint Value Register"
else
rgroup.long c14:(0x0400+0x70)++0x00
line.long 0x00 "DBGBVR7,Debug Breakpoint Value Register"
endif
group.long c14:(0x0101+0x70)++0x00
line.long 0x00 "DBGBXVR7,Breakpoint Extended Value Register"
hexmask.long.byte 0x00 0.--7. 1. "VMID,VMID value for comparison"
if ((per.l(c14:0x0500+0x70)&0x2000)==0x2000)
if ((per.l(c14:0x0500+0x70)&0xC000)==(0x0000||0x4000))
group.long c14:(0x0500+0x70)++0x00
line.long 0x00 "DBGBCR7,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
elif ((per.l(c14:0x0500+0x70)&0xC000)==0x8000)
group.long c14:(0x0500+0x70)++0x00
line.long 0x00 "DBGBCR7,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,Reserved,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
else
group.long c14:(0x0500+0x70)++0x00
line.long 0x00 "DBGBCR7,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,?..."
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0500+0x70)++0x00
line.long 0x00 "DBGBCR7,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
newline
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System,System,User,User/System"
newline
bitfld.long 0x00 0. "E,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree.end
tree "Watchpoint Registers"
tree "Watchpoint 0"
group.long c14:(0x0600+0x0)++0x00
line.long 0x00 "DBGWVR0,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x0)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x0))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x0)++0x00
line.long 0x00 "DBGWCR0,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x0)&0xC000)==0x8000)
group.long c14:(0x0700+0x0)++0x00
line.long 0x00 "DBGWCR0,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x0)++0x00
line.long 0x00 "DBGWCR0,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x0)++0x00
line.long 0x00 "DBGWCR0,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 1"
group.long c14:(0x0600+0x10)++0x00
line.long 0x00 "DBGWVR1,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x10)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x10))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x10)++0x00
line.long 0x00 "DBGWCR1,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x10)&0xC000)==0x8000)
group.long c14:(0x0700+0x10)++0x00
line.long 0x00 "DBGWCR1,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x10)++0x00
line.long 0x00 "DBGWCR1,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x10)++0x00
line.long 0x00 "DBGWCR1,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 2"
group.long c14:(0x0600+0x20)++0x00
line.long 0x00 "DBGWVR2,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x20)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x20))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x20)++0x00
line.long 0x00 "DBGWCR2,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x20)&0xC000)==0x8000)
group.long c14:(0x0700+0x20)++0x00
line.long 0x00 "DBGWCR2,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x20)++0x00
line.long 0x00 "DBGWCR2,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x20)++0x00
line.long 0x00 "DBGWCR2,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 3"
group.long c14:(0x0600+0x30)++0x00
line.long 0x00 "DBGWVR3,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x30)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x30))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x30)++0x00
line.long 0x00 "DBGWCR3,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x30)&0xC000)==0x8000)
group.long c14:(0x0700+0x30)++0x00
line.long 0x00 "DBGWCR3,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x30)++0x00
line.long 0x00 "DBGWCR3,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x30)++0x00
line.long 0x00 "DBGWCR3,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 4"
group.long c14:(0x0600+0x40)++0x00
line.long 0x00 "DBGWVR4,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x40)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x40))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x40)++0x00
line.long 0x00 "DBGWCR4,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x40)&0xC000)==0x8000)
group.long c14:(0x0700+0x40)++0x00
line.long 0x00 "DBGWCR4,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x40)++0x00
line.long 0x00 "DBGWCR4,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x40)++0x00
line.long 0x00 "DBGWCR4,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 5"
group.long c14:(0x0600+0x50)++0x00
line.long 0x00 "DBGWVR5,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x50)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x50))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x50)++0x00
line.long 0x00 "DBGWCR5,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x50)&0xC000)==0x8000)
group.long c14:(0x0700+0x50)++0x00
line.long 0x00 "DBGWCR5,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x50)++0x00
line.long 0x00 "DBGWCR5,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x50)++0x00
line.long 0x00 "DBGWCR5,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 6"
group.long c14:(0x0600+0x60)++0x00
line.long 0x00 "DBGWVR6,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x60)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x60))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x60)++0x00
line.long 0x00 "DBGWCR6,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x60)&0xC000)==0x8000)
group.long c14:(0x0700+0x60)++0x00
line.long 0x00 "DBGWCR6,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x60)++0x00
line.long 0x00 "DBGWCR6,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x60)++0x00
line.long 0x00 "DBGWCR6,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree "Watchpoint 7"
group.long c14:(0x0600+0x70)++0x00
line.long 0x00 "DBGWVR7,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Address value"
if ((per.l(c14:0x0700+0x70)&0x2000)==0x2000)
if ((per.l(c14:(0x0700+0x70))&0xC000)==(0x0000||0x4000))
group.long c14:(0x0700+0x70)++0x00
line.long 0x00 "DBGWCR7,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor,Reserved,User/System/Supervisor"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
elif ((per.l(c14:0x0700+0x70)&0xC000)==0x8000)
group.long c14:(0x0700+0x70)++0x00
line.long 0x00 "DBGWCR7,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,Reserved,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
else
group.long c14:(0x0700+0x70)++0x00
line.long 0x00 "DBGWCR7,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure"
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,?..."
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
else
group.long c14:(0x0700+0x70)++0x00
line.long 0x00 "DBGWCR7,Watchpoint Control Register"
bitfld.long 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.long 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Disabled,Enabled"
hexmask.long.byte 0x00 5.--12. 0x02 "BAS,Byte address select"
newline
bitfld.long 0x00 3.--4. "LSC,Load/Store control" "Reserved,Load,Store,Both"
bitfld.long 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System"
bitfld.long 0x00 0. "E,Enable" "Disabled,Enabled"
endif
tree.end
tree.end
AUTOINDENT.OFF
AUTOINDENT.POP
tree.end
autoindent.on center tree
tree "ADC (12-Bit A/D Converter)"
tree "ADC120"
base ad:0x90004000
group.word 0x00++0x01
line.word 0x00 "ADCSR,A/D Control Register"
bitfld.word 0x00 15. "ADST,A/D conversion Start" "0: Stops A/D conversion process,1: Starts A/D conversion process"
bitfld.word 0x00 13.--14. "ADCS,Scan Mode Select" "0: Single scan mode,1: Group scan mode,2: Continuous scan mode,3: Setting prohibited"
newline
bitfld.word 0x00 12. "ADIE,Scan End Interrupt Enable" "0: Disables ADCn_ADI interrupt generation upon..,1: Enables ADCn_ADI interrupt generation upon.."
bitfld.word 0x00 9. "TRGE,Trigger Start Enable" "0: Disables A/D conversion to be started by the..,1: Enables A/D conversion to be started by the.."
newline
bitfld.word 0x00 8. "EXTRG,Trigger Select" "0: A/D conversion is started by a synchronous..,1: A/D conversion is started by the asynchronous.."
bitfld.word 0x00 7. "DBLE,Double Trigger Mode Select" "0: Deselects double trigger mode,1: Selects double trigger mode"
newline
bitfld.word 0x00 6. "GBADIE,Group B Scan End Interrupt Enable" "0: Disables ADCn_GBADI interrupt generation upon..,1: Enables ADCn_GBADI interrupt generation upon.."
bitfld.word 0x00 0.--4. "DBLANS,Double Trigger Channel Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.word 0x04++0x01
line.word 0x00 "ADANSA0,A/D Channel Select Register A0"
hexmask.word.byte 0x00 0.--7. 1. "ANSA0,A/D conversion Analog input Channel Select"
group.word 0x08++0x01
line.word 0x00 "ADADS0,A/D-Converted Value Addition/Average Function Channel Select Register 0"
hexmask.word.byte 0x00 0.--7. 1. "ADS0,A/D-Converted Value Addition/Average Channel Select"
group.byte 0x0C++0x00
line.byte 0x00 "ADADC,A/D-Converted Value Addition/Average Count Select Register"
bitfld.byte 0x00 7. "AVEE,Average Mode Enable" "0: Addition mode is selected,1: Average mode is selected"
bitfld.byte 0x00 0.--2. "ADC,Addition Count Select" "0: 1-time conversion (no addition same as normal..,1: 2-time conversion (addition once),2: 3-time conversion (addition twice),3: 4-time conversion (addition three times),?,5: 16-time conversion (addition 15 times),?..."
group.word 0x0E++0x01
line.word 0x00 "ADCER,A/D Control Extended Register"
bitfld.word 0x00 15. "ADRFMT,A/D Data Register Format Select" "0: Right-alignment is selected for the A/D data..,1: Left-alignment is selected for the A/D data.."
bitfld.word 0x00 5. "ACE,A/D Data Register Automatic Clearing Enable" "0: Disables automatic clearing,1: Enables automatic clearing"
newline
bitfld.word 0x00 1.--2. "ADPRC,A/D Conversion Accuracy Specify" "0: A/D conversion is performed with 12-bit..,?..."
group.word 0x10++0x01
line.word 0x00 "ADSTRGR,A/D Conversion Start Trigger Select Register"
bitfld.word 0x00 8.--13. "TRSA,A/D Conversion Start Trigger Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.word 0x00 0.--5. "TRSB,A/D Conversion Start Trigger Select for Group B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.word 0x14++0x01
line.word 0x00 "ADANSB0,A/D Channel Select Register B0"
hexmask.word.byte 0x00 0.--7. 1. "ANSB0,A/D Conversion Analog Input Channel Select"
rgroup.word 0x18++0x01
line.word 0x00 "ADDBLDR,A/D Data Duplication Register"
hexmask.word 0x00 0.--15. 1. "DBLDR,The result of A/D conversion in response to the second trigger in double trigger mode"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x2 0x4 0x6 )
rgroup.word ($2+0x20)++0x01
line.word 0x00 "ADDR$1,A/D Data Register"
hexmask.word 0x00 0.--15. 1. "DR,The result of A/D conversion (n: Number of channel)"
repeat.end
group.word 0x66++0x01
line.word 0x00 "ADSHCR,A/D Sample and Hold Control Register"
bitfld.word 0x00 8.--10. "SHANS,Sample and hold use or bypass select for ch0-2" "0: Bypass S/H,1: Use S/H,?..."
hexmask.word.byte 0x00 0.--7. 1. "SSTSH,Sample and hold period setting"
group.byte 0x7D++0x00
line.byte 0x00 "ADELCCR,A/D Event Link Control Register"
bitfld.byte 0x00 2. "GCELC,Event control bit for Group C" "0: Enable the setting of ELCC[1:0],1: Disable the setting of ELCC[1:0] and output.."
bitfld.byte 0x00 0.--1. "ELCC,Event link control bits" "0: Output event signal at the end of scan except..,1: Output event signal at the end of group scan..,2: Output event signal at the end of scan,3: Output event signal at the end of scan"
group.word 0x80++0x01
line.word 0x00 "ADGSPCR,A/D Group Scan Priority Control Register"
bitfld.word 0x00 15. "GBRP,Group B Single Scan Continuous Start" "0: Single scan for group B is not continuously..,1: Single scan for group B is continuously.."
bitfld.word 0x00 14. "LGRRS,Restart Channel Select" "0: Restart scan with first channel,1: Restart scan with suspended channel"
newline
bitfld.word 0x00 1. "GBRSCN,Group B Restart Setting" "0: Scanning for group is not restarted when..,1: Scanning for group is restarted when priority.."
bitfld.word 0x00 0. "PGS,Group Priority Control Setting" "0: Operation is without group priority control,1: Operation is with group priority control"
rgroup.word 0x84++0x01
line.word 0x00 "ADDBLDRA,A/D Data Duplication Register A"
hexmask.word 0x00 0.--15. 1. "DBLDRA,The result of A/D conversion during extended operation in double trigger mode"
rgroup.word 0x86++0x01
line.word 0x00 "ADDBLDRB,A/D Data Duplication Register B"
hexmask.word 0x00 0.--15. 1. "DBLDRB,The result of A/D conversion during extended operation in double trigger mode"
rgroup.byte 0x8C++0x00
line.byte 0x00 "ADWINMON,A/D Compare Function Window A/B Status Monitoring Register"
bitfld.byte 0x00 5. "MONCMPB,Comparing result monitor for window B" "0: Window B comparing condition does not match,1: Window B comparing condition match"
bitfld.byte 0x00 4. "MONCMPA,Comparing result monitor for window A" "0: Window A comparing condition does not match,1: Window A comparing condition match"
newline
bitfld.byte 0x00 0. "MONCOMB,Combination result monitor" "0: Window A/B combination condition does not match,1: Window A/B combination condition match"
group.word 0x90++0x01
line.word 0x00 "ADCMPCR,A/D Compare Function Control Register"
bitfld.word 0x00 15. "CMPAIE,Compare window A Interrupt Enable" "0: Generation of an ADCn_CMPAI interrupt in..,1: Generation of an ADCn_CMPAI interrupt in.."
bitfld.word 0x00 14. "WCMPE,Window Function enable" "0: Window function disabled,1: Window function enabled"
newline
bitfld.word 0x00 13. "CMPBIE,Compare window B Interrupt Enable" "0: Generation of an ADCn_CMPBI interrupt in..,1: Generation of an ADCn_CMPBI interrupt in.."
bitfld.word 0x00 11. "CMPAE,Window A operation permission" "0: Window A is not in operation,1: Window A is in operation"
newline
bitfld.word 0x00 9. "CMPBE,Window B operation permission" "0: Window B is not in operation,1: Window B is in operation"
bitfld.word 0x00 0.--1. "CMPAB,Window A/B combination condition setting" "0: Output ADCn_WCMPM when window A comparison..,1: Output ADCn_WCMPM when window A comparison..,2: Output ADCn_WCMPM when window A comparison..,3: Setting prohibited"
group.word 0x94++0x01
line.word 0x00 "ADCMPANSR0,A/D Compare Function Window A Channel Select Register 0"
hexmask.word.byte 0x00 0.--7. 1. "CMPCHA0,Window A Channel Select"
group.word 0x98++0x01
line.word 0x00 "ADCMPLR0,A/D Compare Function Window A Comparison Condition Setting Register 0"
hexmask.word.byte 0x00 0.--7. 1. "CMPLCHA0,Window A comparison condition for target channel (ch0-7) setting"
group.word 0x9C++0x01
line.word 0x00 "ADCMPDR0,A/D Comparison Function Window A Lower Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPLLA,Reference data setting when using the compare function window A"
group.word 0x9E++0x01
line.word 0x00 "ADCMPDR1,AD Comparison Function Window A Upper Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPULA,Reference data setting when using the compare function window A"
group.word 0xA0++0x01
line.word 0x00 "ADCMPSR0,A/D Comparison Function Window A Channel Status Register 0"
hexmask.word.byte 0x00 0.--7. 1. "CMPSTCHA0,Window A Status Flag"
group.byte 0xA6++0x00
line.byte 0x00 "ADCMPBNSR,A/D Compare Function Window B Channel Select Register"
bitfld.byte 0x00 7. "CMPLB,Window B Comparison Condition Setting" "0: When window function is disabled..,1: When window function is disabled.."
bitfld.byte 0x00 0.--5. "CMPCHB,Window B Channel Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.word 0xA8++0x01
line.word 0x00 "ADWINLLB,A/D Compare Function Window B Lower-Side Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPLLB,Reference lower data setting when using the compare function window B"
group.word 0xAA++0x01
line.word 0x00 "ADWINULB,A/D Compare Function Window B Upper-Side Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPULB,Reference upper data setting when using the compare function window B"
group.byte 0xAC++0x00
line.byte 0x00 "ADCMPBSR,A/D Compare Function Window B Status Register"
bitfld.byte 0x00 0. "CMPSTB,Window B Flag" "0: Comparison conditions are not met,1: Comparison conditions are met"
group.word 0xD4++0x01
line.word 0x00 "ADANSC0,A/D Channel Select Register C0"
hexmask.word.byte 0x00 0.--7. 1. "ANSC0,A/D-Converted Channel Select for Group C in Group Scan Mode"
group.byte 0xD9++0x00
line.byte 0x00 "ADGCTRGR,A/D Group C Trigger Select Register"
bitfld.byte 0x00 7. "GRCE,Group C A/D Conversion Enable" "0: Group C A/D conversion is disabled,1: Group C A/D conversion is enabled"
bitfld.byte 0x00 6. "GCADIE,Group C Scan Completion Interrupt Enable" "0: Group C scan completed interrupt (ADCn_GCADI)..,1: Group C scan completed interrupt (ADCn_GCADI).."
newline
bitfld.byte 0x00 0.--5. "TRSC,Group C A/D Conversion Start Trigger Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x1 0x2 0x3 )
group.byte ($2+0xE0)++0x00
line.byte 0x00 "ADSSTR$1,A/D Sampling State Register"
hexmask.byte 0x00 0.--7. 1. "SST,Sampling Time Setting"
repeat.end
tree.end
tree "ADC121"
base ad:0x80045000
group.word 0x00++0x01
line.word 0x00 "ADCSR,A/D Control Register"
bitfld.word 0x00 15. "ADST,A/D conversion Start" "0: Stops A/D conversion process,1: Starts A/D conversion process"
bitfld.word 0x00 13.--14. "ADCS,Scan Mode Select" "0: Single scan mode,1: Group scan mode,2: Continuous scan mode,3: Setting prohibited"
newline
bitfld.word 0x00 12. "ADIE,Scan End Interrupt Enable" "0: Disables ADCn_ADI interrupt generation upon..,1: Enables ADCn_ADI interrupt generation upon.."
bitfld.word 0x00 9. "TRGE,Trigger Start Enable" "0: Disables A/D conversion to be started by the..,1: Enables A/D conversion to be started by the.."
newline
bitfld.word 0x00 8. "EXTRG,Trigger Select" "0: A/D conversion is started by a synchronous..,1: A/D conversion is started by the asynchronous.."
bitfld.word 0x00 7. "DBLE,Double Trigger Mode Select" "0: Deselects double trigger mode,1: Selects double trigger mode"
newline
bitfld.word 0x00 6. "GBADIE,Group B Scan End Interrupt Enable" "0: Disables ADCn_GBADI interrupt generation upon..,1: Enables ADCn_GBADI interrupt generation upon.."
bitfld.word 0x00 0.--4. "DBLANS,Double Trigger Channel Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.word 0x04++0x01
line.word 0x00 "ADANSA0,A/D Channel Select Register A0"
hexmask.word.byte 0x00 0.--7. 1. "ANSA0,A/D conversion Analog input Channel Select"
group.word 0x08++0x01
line.word 0x00 "ADADS0,A/D-Converted Value Addition/Average Function Channel Select Register 0"
hexmask.word.byte 0x00 0.--7. 1. "ADS0,A/D-Converted Value Addition/Average Channel Select"
group.byte 0x0C++0x00
line.byte 0x00 "ADADC,A/D-Converted Value Addition/Average Count Select Register"
bitfld.byte 0x00 7. "AVEE,Average Mode Enable" "0: Addition mode is selected,1: Average mode is selected"
bitfld.byte 0x00 0.--2. "ADC,Addition Count Select" "0: 1-time conversion (no addition same as normal..,1: 2-time conversion (addition once),2: 3-time conversion (addition twice),3: 4-time conversion (addition three times),?,5: 16-time conversion (addition 15 times),?..."
group.word 0x0E++0x01
line.word 0x00 "ADCER,A/D Control Extended Register"
bitfld.word 0x00 15. "ADRFMT,A/D Data Register Format Select" "0: Right-alignment is selected for the A/D data..,1: Left-alignment is selected for the A/D data.."
bitfld.word 0x00 5. "ACE,A/D Data Register Automatic Clearing Enable" "0: Disables automatic clearing,1: Enables automatic clearing"
newline
bitfld.word 0x00 1.--2. "ADPRC,A/D Conversion Accuracy Specify" "0: A/D conversion is performed with 12-bit..,?..."
group.word 0x10++0x01
line.word 0x00 "ADSTRGR,A/D Conversion Start Trigger Select Register"
bitfld.word 0x00 8.--13. "TRSA,A/D Conversion Start Trigger Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.word 0x00 0.--5. "TRSB,A/D Conversion Start Trigger Select for Group B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.word 0x14++0x01
line.word 0x00 "ADANSB0,A/D Channel Select Register B0"
hexmask.word.byte 0x00 0.--7. 1. "ANSB0,A/D Conversion Analog Input Channel Select"
rgroup.word 0x18++0x01
line.word 0x00 "ADDBLDR,A/D Data Duplication Register"
hexmask.word 0x00 0.--15. 1. "DBLDR,The result of A/D conversion in response to the second trigger in double trigger mode"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x2 0x4 0x6 0x8 0xA 0xC 0xE )
rgroup.word ($2+0x20)++0x01
line.word 0x00 "ADDR$1,A/D Data Register"
hexmask.word 0x00 0.--15. 1. "DR,The result of A/D conversion (n: Number of channel)"
repeat.end
group.word 0x66++0x01
line.word 0x00 "ADSHCR,A/D Sample and Hold Control Register"
bitfld.word 0x00 8.--10. "SHANS,Sample and hold use or bypass select for ch0-2" "0: Bypass S/H,1: Use S/H,?..."
hexmask.word.byte 0x00 0.--7. 1. "SSTSH,Sample and hold period setting"
group.byte 0x7D++0x00
line.byte 0x00 "ADELCCR,A/D Event Link Control Register"
bitfld.byte 0x00 2. "GCELC,Event control bit for Group C" "0: Enable the setting of ELCC[1:0],1: Disable the setting of ELCC[1:0] and output.."
bitfld.byte 0x00 0.--1. "ELCC,Event link control bits" "0: Output event signal at the end of scan except..,1: Output event signal at the end of group scan..,2: Output event signal at the end of scan,3: Output event signal at the end of scan"
group.word 0x80++0x01
line.word 0x00 "ADGSPCR,A/D Group Scan Priority Control Register"
bitfld.word 0x00 15. "GBRP,Group B Single Scan Continuous Start" "0: Single scan for group B is not continuously..,1: Single scan for group B is continuously.."
bitfld.word 0x00 14. "LGRRS,Restart Channel Select" "0: Restart scan with first channel,1: Restart scan with suspended channel"
newline
bitfld.word 0x00 1. "GBRSCN,Group B Restart Setting" "0: Scanning for group is not restarted when..,1: Scanning for group is restarted when priority.."
bitfld.word 0x00 0. "PGS,Group Priority Control Setting" "0: Operation is without group priority control,1: Operation is with group priority control"
rgroup.word 0x84++0x01
line.word 0x00 "ADDBLDRA,A/D Data Duplication Register A"
hexmask.word 0x00 0.--15. 1. "DBLDRA,The result of A/D conversion during extended operation in double trigger mode"
rgroup.word 0x86++0x01
line.word 0x00 "ADDBLDRB,A/D Data Duplication Register B"
hexmask.word 0x00 0.--15. 1. "DBLDRB,The result of A/D conversion during extended operation in double trigger mode"
rgroup.byte 0x8C++0x00
line.byte 0x00 "ADWINMON,A/D Compare Function Window A/B Status Monitoring Register"
bitfld.byte 0x00 5. "MONCMPB,Comparing result monitor for window B" "0: Window B comparing condition does not match,1: Window B comparing condition match"
bitfld.byte 0x00 4. "MONCMPA,Comparing result monitor for window A" "0: Window A comparing condition does not match,1: Window A comparing condition match"
newline
bitfld.byte 0x00 0. "MONCOMB,Combination result monitor" "0: Window A/B combination condition does not match,1: Window A/B combination condition match"
group.word 0x90++0x01
line.word 0x00 "ADCMPCR,A/D Compare Function Control Register"
bitfld.word 0x00 15. "CMPAIE,Compare window A Interrupt Enable" "0: Generation of an ADCn_CMPAI interrupt in..,1: Generation of an ADCn_CMPAI interrupt in.."
bitfld.word 0x00 14. "WCMPE,Window Function enable" "0: Window function disabled,1: Window function enabled"
newline
bitfld.word 0x00 13. "CMPBIE,Compare window B Interrupt Enable" "0: Generation of an ADCn_CMPBI interrupt in..,1: Generation of an ADCn_CMPBI interrupt in.."
bitfld.word 0x00 11. "CMPAE,Window A operation permission" "0: Window A is not in operation,1: Window A is in operation"
newline
bitfld.word 0x00 9. "CMPBE,Window B operation permission" "0: Window B is not in operation,1: Window B is in operation"
bitfld.word 0x00 0.--1. "CMPAB,Window A/B combination condition setting" "0: Output ADCn_WCMPM when window A comparison..,1: Output ADCn_WCMPM when window A comparison..,2: Output ADCn_WCMPM when window A comparison..,3: Setting prohibited"
group.word 0x94++0x01
line.word 0x00 "ADCMPANSR0,A/D Compare Function Window A Channel Select Register 0"
hexmask.word.byte 0x00 0.--7. 1. "CMPCHA0,Window A Channel Select"
group.word 0x98++0x01
line.word 0x00 "ADCMPLR0,A/D Compare Function Window A Comparison Condition Setting Register 0"
hexmask.word.byte 0x00 0.--7. 1. "CMPLCHA0,Window A comparison condition for target channel (ch0-7) setting"
group.word 0x9C++0x01
line.word 0x00 "ADCMPDR0,A/D Comparison Function Window A Lower Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPLLA,Reference data setting when using the compare function window A"
group.word 0x9E++0x01
line.word 0x00 "ADCMPDR1,AD Comparison Function Window A Upper Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPULA,Reference data setting when using the compare function window A"
group.word 0xA0++0x01
line.word 0x00 "ADCMPSR0,A/D Comparison Function Window A Channel Status Register 0"
hexmask.word.byte 0x00 0.--7. 1. "CMPSTCHA0,Window A Status Flag"
group.byte 0xA6++0x00
line.byte 0x00 "ADCMPBNSR,A/D Compare Function Window B Channel Select Register"
bitfld.byte 0x00 7. "CMPLB,Window B Comparison Condition Setting" "0: When window function is disabled..,1: When window function is disabled.."
bitfld.byte 0x00 0.--5. "CMPCHB,Window B Channel Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.word 0xA8++0x01
line.word 0x00 "ADWINLLB,A/D Compare Function Window B Lower-Side Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPLLB,Reference lower data setting when using the compare function window B"
group.word 0xAA++0x01
line.word 0x00 "ADWINULB,A/D Compare Function Window B Upper-Side Level Setting Register"
hexmask.word 0x00 0.--15. 1. "CMPULB,Reference upper data setting when using the compare function window B"
group.byte 0xAC++0x00
line.byte 0x00 "ADCMPBSR,A/D Compare Function Window B Status Register"
bitfld.byte 0x00 0. "CMPSTB,Window B Flag" "0: Comparison conditions are not met,1: Comparison conditions are met"
group.word 0xD4++0x01
line.word 0x00 "ADANSC0,A/D Channel Select Register C0"
hexmask.word.byte 0x00 0.--7. 1. "ANSC0,A/D-Converted Channel Select for Group C in Group Scan Mode"
group.byte 0xD9++0x00
line.byte 0x00 "ADGCTRGR,A/D Group C Trigger Select Register"
bitfld.byte 0x00 7. "GRCE,Group C A/D Conversion Enable" "0: Group C A/D conversion is disabled,1: Group C A/D conversion is enabled"
bitfld.byte 0x00 6. "GCADIE,Group C Scan Completion Interrupt Enable" "0: Group C scan completed interrupt (ADCn_GCADI)..,1: Group C scan completed interrupt (ADCn_GCADI).."
newline
bitfld.byte 0x00 0.--5. "TRSC,Group C A/D Conversion Start Trigger Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 )
group.byte ($2+0xE0)++0x00
line.byte 0x00 "ADSSTR$1,A/D Sampling State Register"
hexmask.byte 0x00 0.--7. 1. "SST,Sampling Time Setting"
repeat.end
tree.end
tree.end
tree "BSC (Bus State Controller)"
base ad:0x80210000
group.long 0x00++0x03
line.long 0x00 "CMNCR,Common Control Register"
bitfld.long 0x00 28. "TL,Transfer End Level" "0: Active-low output from TEND,1: Active-high output from TEND"
bitfld.long 0x00 24. "AL,Acknowledge Level" "0: Active-low output from DACK,1: Active-high output from DACK"
newline
bitfld.long 0x00 9.--10. "DPRTY,DMA Burst Transfer Priority" "0: Accept a refresh request during DMA burst..,1: Accept a refresh request during DMA burst..,2: Do not accept a refresh request during DMA..,3: Setting prohibited"
group.long 0x04++0x03
line.long 0x00 "CS0BCR,CS0 Space Bus Control Register"
bitfld.long 0x00 28.--30. "IWW,Idle Cycles between Write-Read Cycles and Write-Write Cycles" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 25.--27. "IWRWD,Idle State Insertion between Read-Write Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 22.--24. "IWRWS,Idle State Insertion between Read-Write Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 19.--21. "IWRRD,Idle State Insertion between Read-Read Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 16.--18. "IWRRS,Idle State Insertion between Read-Read Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 12.--14. "TYPE,Memory Connected to a Space" "0: Normal space,1: Burst ROM (clock asynchronous),2: MPX-I/O,3: SRAM with byte selection,4: SDRAM,5: Setting prohibited,6: Setting prohibited,7: Burst ROM (clock synchronous)"
newline
bitfld.long 0x00 9.--10. "BSZ,Data Bus Width Specification" "0: Setting prohibited,1: 8-bit size,2: 16-bit size,3: For MPX-I/O selects bus width by address"
group.long 0x0C++0x03
line.long 0x00 "CS2BCR,CS2 Space Bus Control Register"
bitfld.long 0x00 28.--30. "IWW,Idle Cycles between Write-Read Cycles and Write-Write Cycles" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 25.--27. "IWRWD,Idle State Insertion between Read-Write Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 22.--24. "IWRWS,Idle State Insertion between Read-Write Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 19.--21. "IWRRD,Idle State Insertion between Read-Read Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 16.--18. "IWRRS,Idle State Insertion between Read-Read Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 12.--14. "TYPE,Memory Connected to a Space" "0: Normal space,1: Burst ROM (clock asynchronous),2: MPX-I/O,3: SRAM with byte selection,4: SDRAM,5: Setting prohibited,6: Setting prohibited,7: Burst ROM (clock synchronous)"
newline
bitfld.long 0x00 9.--10. "BSZ,Data Bus Width Specification" "0: Setting prohibited,1: 8-bit size,2: 16-bit size,3: For MPX-I/O selects bus width by address"
group.long 0x10++0x03
line.long 0x00 "CS3BCR,CS3 Space Bus Control Register"
bitfld.long 0x00 28.--30. "IWW,Idle Cycles between Write-Read Cycles and Write-Write Cycles" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 25.--27. "IWRWD,Idle State Insertion between Read-Write Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 22.--24. "IWRWS,Idle State Insertion between Read-Write Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 19.--21. "IWRRD,Idle State Insertion between Read-Read Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 16.--18. "IWRRS,Idle State Insertion between Read-Read Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 12.--14. "TYPE,Memory Connected to a Space" "0: Normal space,1: Burst ROM (clock asynchronous),2: MPX-I/O,3: SRAM with byte selection,4: SDRAM,5: Setting prohibited,6: Setting prohibited,7: Burst ROM (clock synchronous)"
newline
bitfld.long 0x00 9.--10. "BSZ,Data Bus Width Specification" "0: Setting prohibited,1: 8-bit size,2: 16-bit size,3: For MPX-I/O selects bus width by address"
group.long 0x18++0x03
line.long 0x00 "CS5BCR,CS5 Space Bus Control Register"
bitfld.long 0x00 28.--30. "IWW,Idle Cycles between Write-Read Cycles and Write-Write Cycles" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 25.--27. "IWRWD,Idle State Insertion between Read-Write Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 22.--24. "IWRWS,Idle State Insertion between Read-Write Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 19.--21. "IWRRD,Idle State Insertion between Read-Read Cycles in Different CS Spaces" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
newline
bitfld.long 0x00 16.--18. "IWRRS,Idle State Insertion between Read-Read Cycles in the Same CS Space" "0: No idle cycle inserted,1: 1 idle cycle inserted,2: 2 idle cycles inserted,3: 4 idle cycles inserted,4: 6 idle cycles inserted,5: 8 idle cycles inserted,6: 10 idle cycles inserted,7: 12 idle cycles inserted"
bitfld.long 0x00 12.--14. "TYPE,Memory Connected to a Space" "0: Normal space,1: Burst ROM (clock asynchronous),2: MPX-I/O,3: SRAM with byte selection,4: SDRAM,5: Setting prohibited,6: Setting prohibited,7: Burst ROM (clock synchronous)"
newline
bitfld.long 0x00 9.--10. "BSZ,Data Bus Width Specification" "0: Setting prohibited,1: 8-bit size,2: 16-bit size,3: For MPX-I/O selects bus width by address"
group.long 0x28++0x03
line.long 0x00 "CS0WCR_0,CS0 Space Wait Control Register for Normal Space SRAM with Byte Selection"
bitfld.long 0x00 20. "BAS,SRAM with Byte Selection Byte Access Select" "0: Activates the WEn# signal at the read/write..,1: Activates the WEn# signal during the.."
bitfld.long 0x00 11.--12. "SW,Number of Delay Cycles from Address CSn# Assertion to RD# WEn# Assertion" "0: 0.5 cycles,1: 1.5 cycles,2: 2.5 cycles,3: 3.5 cycles"
newline
bitfld.long 0x00 7.--10. "WR,Number of Access Waits" "0: No wait insertion,1: 1 cycle,2: 2 cycles,3: 3 cycles,4: 4 cycles,5: 5 cycles,6: 6 cycles,7: 8 cycles,8: 10 cycles,9: 12 cycles,10: 14 cycles,11: 18 cycles,12: 24 cycles,?..."
bitfld.long 0x00 6. "WM,External Wait Mask Specification" "0: External wait input is valid,1: External wait input is ignored"
newline
bitfld.long 0x00 0.--1. "HW,Delay States from RD# WEn# Negation to Address CS0# Negation" "0: 0.5 cycles,1: 1.5 cycles,2: 2.5 cycles,3: 3.5 cycles"
group.long 0x28++0x03
line.long 0x00 "CS0WCR_1,CS0 Space Wait Control Register for Burst ROM with Clocked Asynchronous"
bitfld.long 0x00 20.--21. "BST,Burst Count Specification" "0,1,2,3"
bitfld.long 0x00 16.--17. "BW,Number of Waits during Burst Access" "0: No wait insertion,1: 1 wait,2: 2 waits,3: 3 waits"
newline
bitfld.long 0x00 7.--10. "W,Number of Access Waits" "0: No wait insertion,1: 1 wait,2: 2 waits,3: 3 waits,4: 4 waits,5: 5 waits,6: 6 waits,7: 8 waits,8: 10 waits,9: 12 waits,10: 14 waits,11: 18 waits,12: 24 waits,?..."
bitfld.long 0x00 6. "WM,External Wait Mask Specification" "0: External wait input is valid,1: External wait input is ignored"
group.long 0x28++0x03
line.long 0x00 "CS0WCR_2,CS0 Space Wait Control Register for Burst ROM with Clocked Synchronous"
bitfld.long 0x00 16.--17. "BW,Number of Burst Wait Cycles" "0: No wait insertion,1: 1 wait,2: 2 waits,3: 3 waits"
bitfld.long 0x00 7.--10. "W,Number of Access Waits" "0: No wait insertion,1: 1 wait,2: 2 waits,3: 3 waits,4: 4 waits,5: 5 waits,6: 6 waits,7: 8 waits,8: 10 waits,9: 12 waits,10: 14 waits,11: 18 waits,12: 24 waits,?..."
newline
bitfld.long 0x00 6. "WM,External Wait Mask Specification" "0: External wait input is valid,1: External wait input is ignored"
group.long 0x30++0x03
line.long 0x00 "CS2WCR_0,CS2 Space Wait Control Register for Normal Space SRAM with Byte Selection"
bitfld.long 0x00 20. "BAS,SRAM with Byte Selection Byte Access Select" "0: Activates the WEn# signal at the read/write..,1: Activates the WEn# signal during the.."
bitfld.long 0x00 7.--10. "WR,Number of Access Waits" "0: No wait insertion,1: 1 cycle,2: 2 cycles,3: 3 cycles,4: 4 cycles,5: 5 cycles,6: 6 cycles,7: 8 cycles,8: 10 cycles,9: 12 cycles,10: 14 cycles,11: 18 cycles,12: 24 cycles,?..."
newline
bitfld.long 0x00 6. "WM,External Wait Mask Specification" "0: External wait input is valid,1: External wait input is ignored"
group.long 0x30++0x03
line.long 0x00 "CS2WCR_1,CS2 Space Wait Control Register for SDRAM"
bitfld.long 0x00 7.--8. "A2CL,CAS Latency for Area 2" "0: 00,1: 01,2: 10,3: 11"
group.long 0x34++0x03
line.long 0x00 "CS3WCR_0,CS3 Space Wait Control Register for Normal Space SRAM with Byte Selection"
bitfld.long 0x00 20. "BAS,SRAM with Byte Selection Byte Access Select" "0: Activates the WEn# signal at the read/write..,1: Activates the WEn# signal during the.."
bitfld.long 0x00 7.--10. "WR,Number of Access Waits" "0: No wait insertion,1: 1 cycle,2: 2 cycles,3: 3 cycles,4: 4 cycles,5: 5 cycles,6: 6 cycles,7: 8 cycles,8: 10 cycles,9: 12 cycles,10: 14 cycles,11: 18 cycles,12: 24 cycles,?..."
newline
bitfld.long 0x00 6. "WM,External Wait Mask Specification" "0: External wait input is valid,1: External wait input is ignored"
group.long 0x34++0x03
line.long 0x00 "CS3WCR_1,CS3 Space Wait Control Register for SDRAM"
bitfld.long 0x00 13.--14. "WTRP,Number of Auto-Precharge Completion Wait States" "0: No wait insertion,1: 1 state,2: 2 states,3: 3 states"
bitfld.long 0x00 10.--11. "WTRCD,Number of Waits between ACTV Command and READ(A)/WRIT(A) Command" "0: No wait insertion,1: 1 state,2: 2 states,3: 3 states"
newline
bitfld.long 0x00 7.--8. "A3CL,CAS Latency for Area 3" "0: 00,1: 01,2: 10,3: 11"
bitfld.long 0x00 3.--4. "TRWL,Number of Auto-Precharge Startup Wait Cycles" "0: No wait insertion,1: 1 state,2: 2 states,3: 3 states"
newline
bitfld.long 0x00 0.--1. "WTRC,Number of Idle States from REF Command/Self-Refresh Release to ACTV/REF/MRS Command" "0: 2 states,1: 3 states,2: 5 states,3: 8 states"
group.long 0x3C++0x03
line.long 0x00 "CS5WCR,CS5 Space Wait Control Register for Normal Space SRAM with Byte Selection and MPX-I/O"
bitfld.long 0x00 21. "SZSEL,MPX-I/O Interface Bus Width Specification" "0,1"
bitfld.long 0x00 20. "MPXWSBAS,MPX-I/O Interface Address Cycle Wait and SRAM with Byte Selection Byte Access Select" "0: CS5BCR.TYPE[2:0] = 010b,1: CS5BCR.TYPE[2:0] = 010b"
newline
bitfld.long 0x00 16.--18. "WW,Number of Write Access Waits" "0: The same as WR[3:0] setting (number of read..,1: No wait insertion,2: 1 wait,3: 2 waits,4: 3 waits,5: 4 waits,6: 5 waits,7: 6 waits"
bitfld.long 0x00 11.--12. "SW,Number of Delay Cycles from Address CS5# Assertion to RD# WEn# Assertion" "0: 0.5 states,1: 1.5 states,2: 2.5 states,3: 3.5 states"
newline
bitfld.long 0x00 7.--10. "WR,Number of Read Access Waits" "0: No wait insertion,1: 1 wait,2: 2 waits,3: 3 waits,4: 4 waits,5: 5 waits,6: 6 waits,7: 8 waits,8: 10 waits,9: 12 waits,10: 14 waits,11: 18 waits,12: 24 waits,?..."
bitfld.long 0x00 6. "WM,External Wait Mask Specification" "0: External wait input is valid,1: External wait input is ignored"
newline
bitfld.long 0x00 0.--1. "HW,Delay Cycles from RD# WEn# to Address CS5#" "0: 0.5 states,1: 1.5 states,2: 2.5 states,3: 3.5 states"
group.long 0x4C++0x03
line.long 0x00 "SDCR,SDRAM Control Register"
bitfld.long 0x00 19.--20. "A2ROW,Number of Bits of Row Address for Area 2" "0: 11 bits,1: 12 bits,2: 13 bits,3: Setting prohibited"
bitfld.long 0x00 16.--17. "A2COL,Number of Bits of Column Address for Area 2" "0: 8 bits,1: 9 bits,2: 10 bits,3: Setting prohibited"
newline
bitfld.long 0x00 13. "DEEP,Deep Power-Down Mode" "0: Self-refresh mode,1: Deep power-down mode"
bitfld.long 0x00 11. "RFSH,Refresh Control" "0: No refresh,1: Refresh"
newline
bitfld.long 0x00 10. "RMODE,Refresh Mode" "0: Auto-refresh is performed,1: Self-refresh is performed"
bitfld.long 0x00 9. "PDOWN,Power-Down Mode" "0: The SDRAM does not enter the power-down mode..,1: The SDRAM enters the power-down mode after.."
newline
bitfld.long 0x00 8. "BACTV,Bank Active Mode" "0: Auto-precharge mode (using READA and WRITA..,1: Bank active mode (using READ and WRIT commands)"
bitfld.long 0x00 3.--4. "A3ROW,Number of Bits of Row Address for Area 3" "0: 11 bits,1: 12 bits,2: 13 bits,3: Setting prohibited"
newline
bitfld.long 0x00 0.--1. "A3COL,Number of Bits of Column Address for Area 3" "0: 8 bits,1: 9 bits,2: 10 bits,3: Setting prohibited"
group.long 0x50++0x03
line.long 0x00 "RTCSR,Refresh Timer Control/Status Register"
group.long 0x54++0x03
line.long 0x00 "RTCNT,Refresh Timer Counter"
group.long 0x58++0x03
line.long 0x00 "RTCOR,Refresh Time Constant Register"
repeat 4. (strings "0" "2" "3" "5" )(list 0x0 0x8 0xC 0x14 )
group.long ($2+0x60)++0x03
line.long 0x00 "TOSCOR$1,Timeout Cycle Constant Register $1"
hexmask.long.word 0x00 0.--15. 1. "TOCNUM,Timeout Cycle Number"
repeat.end
group.long 0x80++0x03
line.long 0x00 "TOSTR,Timeout Status Register"
bitfld.long 0x00 5. "CS5TOSTF,CS5 Space Timeout Status Flag" "0,1"
bitfld.long 0x00 3. "CS3TOSTF,CS3 Space Timeout Status Flag" "0,1"
newline
bitfld.long 0x00 2. "CS2TOSTF,CS2 Space Timeout Status Flag" "0,1"
bitfld.long 0x00 0. "CS0TOSTF,CS0 Space Timeout Status Flag" "0: Clearing condition When 0 is written in..,1: Setting condition When the WM bit in the CS0.."
group.long 0x84++0x03
line.long 0x00 "TOENR,Timeout Enable Register"
bitfld.long 0x00 5. "CS5TOEN,CS5 Space Timeout Detection Enable" "0: The timeout detection is disabled,1: The timeout detection is enabled"
bitfld.long 0x00 3. "CS3TOEN,CS3 Space Timeout Detection Enable" "0: The timeout detection is disabled,1: The timeout detection is enabled"
newline
bitfld.long 0x00 2. "CS2TOEN,CS2 Space Timeout Detection Enable" "0: The timeout detection is disabled,1: The timeout detection is enabled"
bitfld.long 0x00 0. "CS0TOEN,CS0 Space Timeout Detection Enable" "0: The timeout detection is disabled,1: The timeout detection is enabled"
tree.end
tree "CANFD (CAN-FD)"
base ad:0x80020000
group.long 0x00++0x03
line.long 0x00 "CFDC0NCFG,Channel"
hexmask.long.byte 0x00 25.--31. 1. "NTSEG2,Nominal Bit Rate Time Segment 2 Control"
hexmask.long.byte 0x00 17.--24. 1. "NTSEG1,Nominal Bit Rate Time Segment 1 Control"
newline
hexmask.long.byte 0x00 10.--16. 1. "NSJW,Nominal Bit Rate Resynchronization Jump Width Control"
hexmask.long.word 0x00 0.--9. 1. "NBRP,Nominal Bit Rate Prescaler"
group.long 0x10++0x03
line.long 0x00 "CFDC1NCFG,Channel"
hexmask.long.byte 0x00 25.--31. 1. "NTSEG2,Nominal Bit Rate Time Segment 2 Control"
hexmask.long.byte 0x00 17.--24. 1. "NTSEG1,Nominal Bit Rate Time Segment 1 Control"
newline
hexmask.long.byte 0x00 10.--16. 1. "NSJW,Nominal Bit Rate Resynchronization Jump Width Control"
hexmask.long.word 0x00 0.--9. 1. "NBRP,Nominal Bit Rate Prescaler"
group.long 0x04++0x03
line.long 0x00 "CFDC0CTR,Channel"
bitfld.long 0x00 31. "ROM,Restricted Operation Mode Enable" "0: Restricted operation mode disabled,1: Restricted operation mode enabled"
bitfld.long 0x00 30. "CRCT,CRC Error Test Enable" "0: The first bit of reception ID field is not..,1: The first bit of reception ID field is inverted"
newline
bitfld.long 0x00 25.--26. "CTMS,Communication Test Mode Select" "0: Standard test mode,1: Listen-only mode,2: Self-test mode 0 (External loopback mode),3: Self-test mode 1 (Internal loopback mode)"
bitfld.long 0x00 24. "CTME,Communication Test Mode Enable" "0: Communication test mode is disabled,1: Communication test mode is enabled"
newline
bitfld.long 0x00 23. "ERRD,Error Display Mode Select" "0: Error flags are displayed only for the first..,1: Error flag for all error information are.."
bitfld.long 0x00 21.--22. "BOM,Bus-Off Recovery Mode Select" "0: ISO11898-1 compliant,1: Entry to Channel Halt mode automatically at..,2: Entry to Channel Halt mode automatically at..,3: Entry to Channel Halt mode (in bus-off state).."
newline
bitfld.long 0x00 19. "TDCVFIE,Transceiver Delay Compensation Violation Interrupt Enable" "0: Transceiver delay compensation violation..,1: Transceiver delay compensation violation.."
bitfld.long 0x00 18. "SOCOIE,Successful Occurrence Counter Overflow Interrupt Enable" "0: Successful occurrence counter overflow..,1: Successful occurrence counter overflow.."
newline
bitfld.long 0x00 17. "EOCOIE,Error Occurrence Counter Overflow Interrupt Enable" "0: Error occurrence counter overflow interrupt..,1: Error occurrence counter overflow interrupt.."
bitfld.long 0x00 16. "TAIE,Transmission Abort Interrupt Enable" "0: Transmission abort interrupt disabled,1: Transmission abort interrupt enabled"
newline
bitfld.long 0x00 15. "ALIE,Arbitration Lost Interrupt Enable" "0: Arbitration lost interrupt disabled,1: Arbitration lost interrupt enabled"
bitfld.long 0x00 14. "BLIE,Bus Lock Interrupt Enable" "0: Bus lock interrupt disabled,1: Bus lock interrupt enabled"
newline
bitfld.long 0x00 13. "OLIE,Overload Interrupt Enable" "0: Overload interrupt disabled,1: Overload interrupt enabled"
bitfld.long 0x00 12. "BORIE,Bus-Off Recovery Interrupt Enable" "0: Bus-off recovery interrupt disabled,1: Bus-off recovery interrupt enabled"
newline
bitfld.long 0x00 11. "BOEIE,Bus-Off Entry Interrupt Enable" "0: Bus-off entry interrupt disabled,1: Bus-off entry interrupt enabled"
bitfld.long 0x00 10. "EPIE,Error Passive Interrupt Enable" "0: Error passive interrupt disabled,1: Error passive interrupt enabled"
newline
bitfld.long 0x00 9. "EWIE,Error Warning Interrupt Enable" "0: Error warning interrupt disabled,1: Error warning interrupt enabled"
bitfld.long 0x00 8. "BEIE,Bus Error Interrupt Enable" "0: Bus error interrupt disabled,1: Bus error interrupt enabled"
newline
bitfld.long 0x00 3. "RTBO,Forcible Return from Bus-Off" "0,1"
bitfld.long 0x00 2. "CSLPR,Channel Stop Mode" "0: Other than Channel Stop mode,1: Channel Stop mode"
newline
bitfld.long 0x00 0.--1. "CHMDC,Mode Select" "0: Channel Communication mode,1: Channel Reset mode,2: Channel Halt mode,3: Setting prohibited"
group.long 0x14++0x03
line.long 0x00 "CFDC1CTR,Channel"
bitfld.long 0x00 31. "ROM,Restricted Operation Mode Enable" "0: Restricted operation mode disabled,1: Restricted operation mode enabled"
bitfld.long 0x00 30. "CRCT,CRC Error Test Enable" "0: The first bit of reception ID field is not..,1: The first bit of reception ID field is inverted"
newline
bitfld.long 0x00 25.--26. "CTMS,Communication Test Mode Select" "0: Standard test mode,1: Listen-only mode,2: Self-test mode 0 (External loopback mode),3: Self-test mode 1 (Internal loopback mode)"
bitfld.long 0x00 24. "CTME,Communication Test Mode Enable" "0: Communication test mode is disabled,1: Communication test mode is enabled"
newline
bitfld.long 0x00 23. "ERRD,Error Display Mode Select" "0: Error flags are displayed only for the first..,1: Error flag for all error information are.."
bitfld.long 0x00 21.--22. "BOM,Bus-Off Recovery Mode Select" "0: ISO11898-1 compliant,1: Entry to Channel Halt mode automatically at..,2: Entry to Channel Halt mode automatically at..,3: Entry to Channel Halt mode (in bus-off state).."
newline
bitfld.long 0x00 19. "TDCVFIE,Transceiver Delay Compensation Violation Interrupt Enable" "0: Transceiver delay compensation violation..,1: Transceiver delay compensation violation.."
bitfld.long 0x00 18. "SOCOIE,Successful Occurrence Counter Overflow Interrupt Enable" "0: Successful occurrence counter overflow..,1: Successful occurrence counter overflow.."
newline
bitfld.long 0x00 17. "EOCOIE,Error Occurrence Counter Overflow Interrupt Enable" "0: Error occurrence counter overflow interrupt..,1: Error occurrence counter overflow interrupt.."
bitfld.long 0x00 16. "TAIE,Transmission Abort Interrupt Enable" "0: Transmission abort interrupt disabled,1: Transmission abort interrupt enabled"
newline
bitfld.long 0x00 15. "ALIE,Arbitration Lost Interrupt Enable" "0: Arbitration lost interrupt disabled,1: Arbitration lost interrupt enabled"
bitfld.long 0x00 14. "BLIE,Bus Lock Interrupt Enable" "0: Bus lock interrupt disabled,1: Bus lock interrupt enabled"
newline
bitfld.long 0x00 13. "OLIE,Overload Interrupt Enable" "0: Overload interrupt disabled,1: Overload interrupt enabled"
bitfld.long 0x00 12. "BORIE,Bus-Off Recovery Interrupt Enable" "0: Bus-off recovery interrupt disabled,1: Bus-off recovery interrupt enabled"
newline
bitfld.long 0x00 11. "BOEIE,Bus-Off Entry Interrupt Enable" "0: Bus-off entry interrupt disabled,1: Bus-off entry interrupt enabled"
bitfld.long 0x00 10. "EPIE,Error Passive Interrupt Enable" "0: Error passive interrupt disabled,1: Error passive interrupt enabled"
newline
bitfld.long 0x00 9. "EWIE,Error Warning Interrupt Enable" "0: Error warning interrupt disabled,1: Error warning interrupt enabled"
bitfld.long 0x00 8. "BEIE,Bus Error Interrupt Enable" "0: Bus error interrupt disabled,1: Bus error interrupt enabled"
newline
bitfld.long 0x00 3. "RTBO,Forcible Return from Bus-Off" "0,1"
bitfld.long 0x00 2. "CSLPR,Channel Stop Mode" "0: Other than Channel Stop mode,1: Channel Stop mode"
newline
bitfld.long 0x00 0.--1. "CHMDC,Mode Select" "0: Channel Communication mode,1: Channel Reset mode,2: Channel Halt mode,3: Setting prohibited"
group.long 0x08++0x03
line.long 0x00 "CFDC0STS,Channel"
hexmask.long.byte 0x00 24.--31. 1. "TEC,Transmission Error Count"
hexmask.long.byte 0x00 16.--23. 1. "REC,Reception Error Count"
newline
bitfld.long 0x00 8. "ESIF,Error State Indication Flag" "0: No CANFD message whose ESI bit is recessive..,1: At least one CANFD message whose ESI bit is.."
rbitfld.long 0x00 7. "COMSTS,Communication Status Flag" "0: Communication is not ready,1: Communication is ready"
newline
rbitfld.long 0x00 6. "RECSTS,Receive Status Flag" "0: Bus idle in transmission or bus off state,1: In reception"
rbitfld.long 0x00 5. "TRMSTS,Transmit Status Flag" "0: Bus idle or in reception,1: In transmission or bus off state"
newline
rbitfld.long 0x00 4. "BOSTS,Bus-Off Status Flag" "0: Not in bus-off state,1: In bus-off state"
rbitfld.long 0x00 3. "EPSTS,Error Passive Status Flag" "0: Not in error passive state,1: In error passive state"
newline
rbitfld.long 0x00 2. "CSLPSTS,Channel Stop Status Flag" "0: Not in Channel Sleep mode,1: In Channel Sleep mode"
rbitfld.long 0x00 1. "CHLTSTS,Channel Halt Status Flag" "0: Not in Channel Halt mode,1: In Channel Halt mode"
newline
rbitfld.long 0x00 0. "CRSTSTS,Channel Reset Status Flag" "0: Not in Channel Reset mode,1: In Channel Reset mode"
group.long 0x18++0x03
line.long 0x00 "CFDC1STS,Channel"
hexmask.long.byte 0x00 24.--31. 1. "TEC,Transmission Error Count"
hexmask.long.byte 0x00 16.--23. 1. "REC,Reception Error Count"
newline
bitfld.long 0x00 8. "ESIF,Error State Indication Flag" "0: No CANFD message whose ESI bit is recessive..,1: At least one CANFD message whose ESI bit is.."
rbitfld.long 0x00 7. "COMSTS,Communication Status Flag" "0: Communication is not ready,1: Communication is ready"
newline
rbitfld.long 0x00 6. "RECSTS,Receive Status Flag" "0: Bus idle in transmission or bus off state,1: In reception"
rbitfld.long 0x00 5. "TRMSTS,Transmit Status Flag" "0: Bus idle or in reception,1: In transmission or bus off state"
newline
rbitfld.long 0x00 4. "BOSTS,Bus-Off Status Flag" "0: Not in bus-off state,1: In bus-off state"
rbitfld.long 0x00 3. "EPSTS,Error Passive Status Flag" "0: Not in error passive state,1: In error passive state"
newline
rbitfld.long 0x00 2. "CSLPSTS,Channel Stop Status Flag" "0: Not in Channel Sleep mode,1: In Channel Sleep mode"
rbitfld.long 0x00 1. "CHLTSTS,Channel Halt Status Flag" "0: Not in Channel Halt mode,1: In Channel Halt mode"
newline
rbitfld.long 0x00 0. "CRSTSTS,Channel Reset Status Flag" "0: Not in Channel Reset mode,1: In Channel Reset mode"
group.long 0x0C++0x03
line.long 0x00 "CFDC0ERFL,Channel"
hexmask.long.word 0x00 16.--30. 1. "CRCREG,CRC Calculation Data (CRC length: 15 bits)"
bitfld.long 0x00 14. "ADERR,Acknowledge Delimiter Error Flag" "0: Channel acknowledge delimiter error not..,1: Channel acknowledge delimiter error detected"
newline
bitfld.long 0x00 13. "B0ERR,Dominant Bit Error Flag" "0: Channel dominant bit error not detected,1: Channel dominant bit error detected"
bitfld.long 0x00 12. "B1ERR,Recessive Bit Error Flag" "0: Channel recessive bit error not detected,1: Channel recessive bit error detected"
newline
bitfld.long 0x00 11. "CERR,CRC Error Flag" "0: Channel CRC error not detected,1: Channel CRC error detected"
bitfld.long 0x00 10. "AERR,Acknowledge Error Flag" "0: Channel acknowledge error not detected,1: Channel acknowledge error detected"
newline
bitfld.long 0x00 9. "FERR,Form Error Flag" "0: Channel form error not detected,1: Channel form error detected"
bitfld.long 0x00 8. "SERR,Stuff Error Flag" "0: Channel stuff error not detected,1: Channel stuff error detected"
newline
bitfld.long 0x00 7. "ALF,Arbitration Lost Flag" "0: Channel arbitration-lost not detected,1: Channel arbitration-lost detected"
bitfld.long 0x00 6. "BLF,Bus Lock Flag" "0: Channel bus lock not detected,1: Channel bus lock detected"
newline
bitfld.long 0x00 5. "OVLF,Overload Flag" "0: Channel overload not detected,1: Channel overload detected"
bitfld.long 0x00 4. "BORF,Bus-Off Recovery Flag" "0: Channel bus-off recovery not detected,1: Channel bus-off recovery detected"
newline
bitfld.long 0x00 3. "BOEF,Bus-Off Entry Flag" "0: Channel bus-off entry not detected,1: Channel bus-off entry detected"
bitfld.long 0x00 2. "EPF,Error Passive Flag" "0: Channel error passive not detected,1: Channel error passive detected"
newline
bitfld.long 0x00 1. "EWF,Error Warning Flag" "0: Channel error warning not detected,1: Channel error warning detected"
bitfld.long 0x00 0. "BEF,Bus Error Flag" "0: Channel bus error not detected,1: Channel bus error detected"
group.long 0x1C++0x03
line.long 0x00 "CFDC1ERFL,Channel"
hexmask.long.word 0x00 16.--30. 1. "CRCREG,CRC Calculation Data (CRC length: 15 bits)"
bitfld.long 0x00 14. "ADERR,Acknowledge Delimiter Error Flag" "0: Channel acknowledge delimiter error not..,1: Channel acknowledge delimiter error detected"
newline
bitfld.long 0x00 13. "B0ERR,Dominant Bit Error Flag" "0: Channel dominant bit error not detected,1: Channel dominant bit error detected"
bitfld.long 0x00 12. "B1ERR,Recessive Bit Error Flag" "0: Channel recessive bit error not detected,1: Channel recessive bit error detected"
newline
bitfld.long 0x00 11. "CERR,CRC Error Flag" "0: Channel CRC error not detected,1: Channel CRC error detected"
bitfld.long 0x00 10. "AERR,Acknowledge Error Flag" "0: Channel acknowledge error not detected,1: Channel acknowledge error detected"
newline
bitfld.long 0x00 9. "FERR,Form Error Flag" "0: Channel form error not detected,1: Channel form error detected"
bitfld.long 0x00 8. "SERR,Stuff Error Flag" "0: Channel stuff error not detected,1: Channel stuff error detected"
newline
bitfld.long 0x00 7. "ALF,Arbitration Lost Flag" "0: Channel arbitration-lost not detected,1: Channel arbitration-lost detected"
bitfld.long 0x00 6. "BLF,Bus Lock Flag" "0: Channel bus lock not detected,1: Channel bus lock detected"
newline
bitfld.long 0x00 5. "OVLF,Overload Flag" "0: Channel overload not detected,1: Channel overload detected"
bitfld.long 0x00 4. "BORF,Bus-Off Recovery Flag" "0: Channel bus-off recovery not detected,1: Channel bus-off recovery detected"
newline
bitfld.long 0x00 3. "BOEF,Bus-Off Entry Flag" "0: Channel bus-off entry not detected,1: Channel bus-off entry detected"
bitfld.long 0x00 2. "EPF,Error Passive Flag" "0: Channel error passive not detected,1: Channel error passive detected"
newline
bitfld.long 0x00 1. "EWF,Error Warning Flag" "0: Channel error warning not detected,1: Channel error warning detected"
bitfld.long 0x00 0. "BEF,Bus Error Flag" "0: Channel bus error not detected,1: Channel bus error detected"
rgroup.long 0x80++0x03
line.long 0x00 "CFDGIPV,Global IP Version Register"
hexmask.long.word 0x00 16.--29. 1. "PSI,Parameter Status Information"
bitfld.long 0x00 8.--9. "IPT,IP Type" "0: CAN IP,1: CAN-FD IP,2: Reserved,3: Reserved"
newline
hexmask.long.byte 0x00 0.--7. 1. "IPV,IP Version"
group.long 0x84++0x03
line.long 0x00 "CFDGCFG,Global Configuration Register"
hexmask.long.word 0x00 16.--31. 1. "ITRCP,Interval Timer Reference Clock Prescaler"
bitfld.long 0x00 13.--15. "TSBTCS,Timestamp Bit Time Channel Select" "0: Select clock from channel 0,1: Select clock from channel 1,?..."
newline
bitfld.long 0x00 12. "TSSS,Timestamp Source Select" "0: Source clock for timestamp counter is..,1: Source clock for timestamp counter is bit.."
bitfld.long 0x00 8.--11. "TSP,Timestamp Prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 5. "CMPOC,CAN-FD Message Payload Overflow Configuration" "0: Message is rejected,1: Message payload is cut to fit to configured.."
bitfld.long 0x00 4. "DCS,Data Link Controller Clock Select" "0: PCLKM,1: PCLKCAN"
newline
bitfld.long 0x00 3. "MME,Mirror Mode Enable" "0: Mirror mode disabled,1: Mirror mode enabled"
bitfld.long 0x00 2. "DRE,DLC Replacement Enable" "0: DLC replacement disabled,1: DLC replacement enabled"
newline
bitfld.long 0x00 1. "DCE,DLC Check Enable" "0: DLC check disabled,1: DLC check enabled"
bitfld.long 0x00 0. "TPRI,Transmission Priority" "0: ID priority,1: Message buffer number priority"
group.long 0x88++0x03
line.long 0x00 "CFDGCTR,Global Control Register"
bitfld.long 0x00 16. "TSRST,Timestamp Reset" "0: Timestamp not reset,1: Timestamp reset"
bitfld.long 0x00 15. "MOWEIE,Message Lost Error Interrupt Enable" "0: GW FIFO message lost error interrupt disabled,1: GW FIFO message lost error interrupt enabled"
newline
bitfld.long 0x00 14. "QMEIE,TXQ Message Lost Error Interrupt Enable" "0: TXQ message lost error interrupt disabled,1: TXQ message lost error interrupt enabled"
bitfld.long 0x00 12. "QOWEIE,TXQ Message Overwrite Error Interrupt Enable" "0: TXQ message overwrite error interrupt disabled,1: TXQ message overwrite error interrupt enabled"
newline
bitfld.long 0x00 11. "CMPOFIE,CAN-FD Message Payload Overflow Flag Interrupt Enable" "0: CAN-FD message payload overflow flag..,1: CAN-FD message payload overflow flag.."
bitfld.long 0x00 10. "THLEIE,TX History List Entry Lost Interrupt Enable" "0: TX history list entry lost interrupt disabled,1: TX history list entry lost interrupt enabled"
newline
bitfld.long 0x00 9. "MEIE,Message Lost Error Interrupt Enable" "0: Message lost error interrupt disabled,1: Message lost error interrupt enabled"
bitfld.long 0x00 8. "DEIE,DLC Check Interrupt Enable" "0: DLC check interrupt disabled,1: DLC check interrupt enabled"
newline
bitfld.long 0x00 2. "GSLPR,Global Sleep Request" "0: Global sleep request disabled,1: Global sleep request enabled"
bitfld.long 0x00 0.--1. "GMDC,Global Mode Control" "0: Global operation mode request,1: Global reset mode request,2: Global halt mode request,3: Keep current value"
rgroup.long 0x8C++0x03
line.long 0x00 "CFDGSTS,Global Status Register"
bitfld.long 0x00 3. "GRAMINIT,Global RAM Initialization" "0: RAM initialization is complete,1: RAM initialization is ongoing"
bitfld.long 0x00 2. "GSLPSTS,Global Sleep Status" "0: Not in Sleep mode,1: In Sleep mode"
newline
bitfld.long 0x00 1. "GHLTSTS,Global Halt Status" "0: Not in Halt mode,1: In Halt mode"
bitfld.long 0x00 0. "GRSTSTS,Global Reset Status" "0: Not in Reset mode,1: In Reset mode"
group.long 0x90++0x03
line.long 0x00 "CFDGERFL,Global Error Flag Register"
bitfld.long 0x00 17. "EEF1,ECC Error Flag for Channel 1" "0: ECC error not detected during TX-SCAN,1: ECC error detected during TX-SCAN"
bitfld.long 0x00 16. "EEF0,ECC Error Flag for Channel 0" "0: ECC error not detected during TX-SCAN,1: ECC error detected during TX-SCAN"
newline
rbitfld.long 0x00 7. "MOWES,Message Overwrite Error Status" "0: Message overwrite error not detected,1: Message overwrite error detected"
rbitfld.long 0x00 6. "QMES,TXQ Message Lost Error Status" "0: TXQ message lost error not detected,1: TXQ message lost error detected"
newline
rbitfld.long 0x00 4. "QOWES,TXQ Message Overwrite Error Status" "0: TXQ message overwrite error not detected,1: TXQ message overwrite error detected"
bitfld.long 0x00 3. "CMPOF,CAN-FD Message Payload Overflow Flag" "0: CAN-FD message payload overflow not detected,1: CAN-FD message payload overflow detected"
newline
rbitfld.long 0x00 2. "THLES,TX History List Entry Lost Error Status" "0: TX history list entry lost error not detected,1: TX history list entry lost error detected"
rbitfld.long 0x00 1. "MES,Message Lost Error Status" "0: Message lost error not detected,1: Message lost error detected"
newline
bitfld.long 0x00 0. "DEF,DLC Error Flag" "0: DLC error not detected,1: DLC error detected"
rgroup.long 0x94++0x03
line.long 0x00 "CFDGTSC,Global Timestamp Counter Register"
hexmask.long.word 0x00 0.--15. 1. "TS,Timestamp value"
group.long 0x98++0x03
line.long 0x00 "CFDGAFLECTR,Global Acceptance Filter List Entry Control Register"
bitfld.long 0x00 8. "AFLDAE,Acceptance Filter List Data Access Enable" "0: Acceptance Filter List data access disabled,1: Acceptance Filter List data access enabled"
bitfld.long 0x00 0.--3. "AFLPN,Acceptance Filter List Page Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x9C++0x03
line.long 0x00 "CFDGAFLCFG0,Global Acceptance Filter List Configuration Register 0"
hexmask.long.word 0x00 16.--24. 1. "RNC0,Rule Number for Channel 0"
hexmask.long.word 0x00 0.--8. 1. "RNC1,Rule Number for Channel 1"
group.long 0xAC++0x03
line.long 0x00 "CFDRMNB,RX Message Buffer Number Register"
bitfld.long 0x00 8.--10. "RMPLS,Reception Message Buffer Payload Data Size" "0: 8 bytes,1: 12 bytes,2: 16 bytes,3: 20 bytes,4: 24 bytes,5: 32 bytes,6: 48 bytes,7: 64 bytes"
hexmask.long.byte 0x00 0.--7. 1. "NRXMB,Number of RX Message Buffers"
group.long 0xB0++0x03
line.long 0x00 "CFDRMND0,RX Message Buffer New Data Register 0"
hexmask.long 0x00 0.--31. 1. "RMNS,RX Message Buffer New Data Status"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0xC0)++0x03
line.long 0x00 "CFDRFCC$1,RX FIFO Configuration/Control Register"
bitfld.long 0x00 16. "RFFIE,RX FIFO Full Interrupt Enable" "0: FIFO interrupt generation disabled,1: FIFO interrupt generation enabled"
bitfld.long 0x00 13.--15. "RFIGCV,RX FIFO Interrupt Generation Counter Value" "0: Interrupt generated when FIFO is 1/8th full,1: Interrupt generated when FIFO is 1/4th full,2: Interrupt generated when FIFO is 3/8th full,3: Interrupt generated when FIFO is 1/2 full,4: Interrupt generated when FIFO is 5/8th full,5: Interrupt generated when FIFO is 3/4th full,6: Interrupt generated when FIFO is 7/8th full,7: Interrupt generated when FIFO is full"
newline
bitfld.long 0x00 12. "RFIM,RX FIFO Interrupt Mode" "0: Interrupt generated when RX FIFO counter..,1: Interrupt generated at the end of every.."
bitfld.long 0x00 8.--10. "RFDC,RX FIFO Depth Configuration" "0: FIFO Depth = 0 messages,1: FIFO Depth = 4 messages,2: FIFO Depth = 8 messages,3: FIFO Depth = 16 messages,4: FIFO Depth = 32 messages,5: FIFO Depth = 48 messages,6: FIFO Depth = 64 messages,7: FIFO Depth = 128 messages"
newline
bitfld.long 0x00 4.--6. "RFPLS,Rx FIFO Payload Data Size Configuration" "0: 8 bytes,1: 12 bytes,2: 16 bytes,3: 20 bytes,4: 24 bytes,5: 32 bytes,6: 48 bytes,7: 64 bytes"
bitfld.long 0x00 1. "RFIE,RX FIFO Interrupt Enable" "0: FIFO interrupt generation disabled,1: FIFO interrupt generation enabled"
newline
bitfld.long 0x00 0. "RFE,RX FIFO Enable" "0: FIFO disabled,1: FIFO enabled"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0xE0)++0x03
line.long 0x00 "CFDRFSTS$1,RX FIFO Status Register"
bitfld.long 0x00 16. "RFFIF,RX FIFO Full Interrupt Flag" "0: FIFO full interrupt condition not satisfied,1: FIFO full interrupt condition satisfied"
hexmask.long.byte 0x00 8.--15. 1. "RFMC,RX FIFO Message Count"
newline
bitfld.long 0x00 3. "RFIF,RX FIFO Interrupt Flag" "0: FIFO interrupt condition not satisfied,1: FIFO interrupt condition satisfied"
bitfld.long 0x00 2. "RFMLT,RX FIFO Message Lost" "0: No message lost in FIFO,1: FIFO message lost"
newline
rbitfld.long 0x00 1. "RFFLL,RX FIFO Full" "0: FIFO not full,1: FIFO full"
rbitfld.long 0x00 0. "RFEMP,RX FIFO Empty" "0: FIFO not empty,1: FIFO empty"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C )
group.long ($2+0x100)++0x03
line.long 0x00 "CFDRFPCTR$1,RX FIFO Pointer Control Register"
hexmask.long.byte 0x00 0.--7. 1. "RFPC,RX FIFO Pointer Control"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 )
group.long ($2+0x120)++0x03
line.long 0x00 "CFDCFCC$1,Common FIFO Configuration/Control Register"
hexmask.long.byte 0x00 24.--31. 1. "CFITT,Common FIFO Interval Transmission Time"
bitfld.long 0x00 21.--23. "CFDC,Common FIFO Depth Configuration" "0: FIFO Depth = 0 messages,1: FIFO Depth = 4 messages,2: FIFO Depth = 8 messages,3: FIFO Depth = 16 messages,4: FIFO Depth = 32 messages,5: FIFO Depth = 48 messages,6: FIFO Depth = 64 messages,7: FIFO Depth = 128 messages"
newline
bitfld.long 0x00 16.--20. "CFTML,Common FIFO TX Message Buffer Link" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 13.--15. "CFIGCV,Common FIFO Interrupt Generation Counter Value" "0: Interrupt generated when FIFO is 1/8th full,1: Interrupt generated when FIFO is 1/4th full,2: Interrupt generated when FIFO is 3/8th full,3: Interrupt generated when FIFO is 1/2 full,4: Interrupt generated when FIFO is 5/8th full,5: Interrupt generated when FIFO is 3/4th full,6: Interrupt generated when FIFO is 7/8th full,7: Interrupt generated when FIFO is full"
newline
bitfld.long 0x00 12. "CFIM,Common FIFO Interrupt Mode" "0: RX FIFO mode,1: RX FIFO mode"
bitfld.long 0x00 11. "CFITR,Common FIFO Interval Timer Resolution" "0: Reference clock period ? 1,1: Reference clock period ? 10"
newline
bitfld.long 0x00 10. "CFITSS,Common FIFO Interval Timer Source Select" "0: Reference clock (? 1 / ? 10 period),1: Bit time clock of related channel (FIFO is.."
bitfld.long 0x00 8.--9. "CFM,Common FIFO Mode" "0: RX FIFO mode,1: TX FIFO mode,2: CAN  CAN GW FIFO mode,3: Reserved"
newline
bitfld.long 0x00 4.--6. "CFPLS,Common FIFO Payload Data Size Configuration" "0: 8 bytes,1: 12 bytes,2: 16 bytes,3: 20 bytes,4: 24 bytes,5: 32 bytes,6: 48 bytes,7: 64 bytes"
bitfld.long 0x00 2. "CFTXIE,Common FIFO TX Interrupt Enable" "0: FIFO interrupt generation disabled for Frame TX,1: FIFO interrupt generation enabled for Frame TX"
newline
bitfld.long 0x00 1. "CFRXIE,Common FIFO RX Interrupt Enable" "0: FIFO interrupt generation disabled for Frame RX,1: FIFO interrupt generation enabled for Frame RX"
bitfld.long 0x00 0. "CFE,Common FIFO Enable" "0: FIFO disabled,1: FIFO enabled"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 )
group.long ($2+0x180)++0x03
line.long 0x00 "CFDCFCCE$1,Common FIFO Configuration/Control Enhancement Register"
bitfld.long 0x00 16. "CFBME,Common FIFO Buffering Mode Enable" "0: Transmission from Common FIFO,1: Transmission halt from Common FIFO"
bitfld.long 0x00 8. "CFMOWM,Common FIFO Message Overwrite Mode" "0: Message discarded mode,1: Message overwrite mode"
newline
bitfld.long 0x00 2. "CFOFTXIE,Common FIFO One Frame Transmission Interrupt Enable" "0: One Frame TX interrupt generation disabled,1: One Frame TX interrupt generation enabled"
bitfld.long 0x00 1. "CFOFRXIE,Common FIFO One Frame Reception Interrupt Enable" "0: One Frame RX interrupt generation disabled,1: One Frame RX interrupt generation enabled"
newline
bitfld.long 0x00 0. "CFFIE,Common FIFO Full Interrupt Enable" "0: FIFO Interrupt generation disabled,1: FIFO Interrupt generation enabled"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 )
group.long ($2+0x1E0)++0x03
line.long 0x00 "CFDCFSTS$1,Common FIFO Status Register"
bitfld.long 0x00 24. "CFMOW,Common FIFO Message Over" "0: No message overwrite occurred in FIFO,1: Message overwrite occurred in FIFO"
bitfld.long 0x00 18. "CFOFTXIF,Common FIFO One Frame Transmission Interrupt Flag" "0,1"
newline
bitfld.long 0x00 17. "CFOFRXIF,Common FIFO One Frame Reception Interrupt Flag" "0,1"
bitfld.long 0x00 16. "CFFIF,Common FIFO Full Interrupt Flag" "0: Interrupt condition not satisfied for FIFO..,1: Interrupt condition satisfied for FIFO full.."
newline
hexmask.long.byte 0x00 8.--15. 1. "CFMC,Common FIFO Message Count"
bitfld.long 0x00 4. "CFTXIF,Common TX FIFO Interrupt Flag" "0: FIFO interrupt condition not satisfied after..,1: FIFO Interrupt condition satisfied after.."
newline
bitfld.long 0x00 3. "CFRXIF,Common RX FIFO Interrupt Flag" "0: FIFO interrupt condition not satisfied after..,1: FIFO interrupt condition satisfied after.."
bitfld.long 0x00 2. "CFMLT,Common FIFO Message Lost" "0: FIFO message not lost,1: FIFO message lost"
newline
rbitfld.long 0x00 1. "CFFLL,Common FIFO Full" "0: FIFO not full,1: FIFO full"
rbitfld.long 0x00 0. "CFEMP,Common FIFO Empty" "0: FIFO not empty,1: FIFO empty"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 )
wgroup.long ($2+0x240)++0x03
line.long 0x00 "CFDCFPCTR$1,Common FIFO Pointer Control Register"
hexmask.long.byte 0x00 0.--7. 1. "CFPC,Common FIFO Pointer Control"
repeat.end
rgroup.long 0x2A0++0x03
line.long 0x00 "CFDFESTS,FIFO Empty Status Register"
bitfld.long 0x00 8.--13. "CFXEMP,Common FIFO Empty Status" "0: Corresponding FIFO not empty,1: Corresponding FIFO empty,?..."
hexmask.long.byte 0x00 0.--7. 1. "RFXEMP,RX FIFO Empty Status"
rgroup.long 0x2A4++0x03
line.long 0x00 "CFDFFSTS,FIFO Full Status Register"
bitfld.long 0x00 8.--13. "CFXFLL,Common FIFO Full Status" "0: Corresponding FIFO not full,1: Corresponding FIFO full,?..."
hexmask.long.byte 0x00 0.--7. 1. "RFXFLL,RX FIFO Full Status"
rgroup.long 0x2A8++0x03
line.long 0x00 "CFDFMSTS,FIFO Message Lost Status Register"
bitfld.long 0x00 8.--13. "CFXMLT,Common FIFO Message Lost Status" "0: Corresponding FIFO Message Lost flag not set,1: Corresponding FIFO Message Lost flag set,?..."
hexmask.long.byte 0x00 0.--7. 1. "RFXMLT,RX FIFO Message Lost Status"
rgroup.long 0x2AC++0x03
line.long 0x00 "CFDRFISTS,RX FIFO Interrupt Flag Status Register"
hexmask.long.byte 0x00 16.--23. 1. "RFXFFLL,RX FIFO[x] Interrupt Full Flag Status"
hexmask.long.byte 0x00 0.--7. 1. "RFXIF,RX FIFO[x] Interrupt Flag Status"
rgroup.long 0x2B0++0x03
line.long 0x00 "CFDCFRISTS,Common FIFO RX Interrupt Flag Status Register"
bitfld.long 0x00 0.--5. "CFXRXIF,Common FIFO RX Interrupt Flag Status" "0: Corresponding Common FIFO RX Interrupt flag..,1: Corresponding Common FIFO RX Interrupt flag set,?..."
rgroup.long 0x2B4++0x03
line.long 0x00 "CFDCFTISTS,Common FIFO TX Interrupt Flag Status Register"
bitfld.long 0x00 0.--5. "CFXTXIF,Common FIFO TX Interrupt Flag Status" "0: Corresponding Common FIFO TX Interrupt flag..,1: Corresponding Common FIFO TX Interrupt flag set,?..."
rgroup.long 0x2B8++0x03
line.long 0x00 "CFDCFOFRISTS,Common FIFO One Frame RX Interrupt Flag Status Register"
bitfld.long 0x00 0.--5. "CFXOFRXIF,Common FIFO One Frame RX Interrupt Flag Status" "0: Corresponding Common FIFO One Frame RX..,1: Corresponding Common FIFO One Frame RX..,?..."
rgroup.long 0x2BC++0x03
line.long 0x00 "CFDCFOFTISTS,Common FIFO One Frame TX Interrupt Flag Status Register"
bitfld.long 0x00 0.--5. "CFXOFTXIF,Common FIFO One Frame TX Interrupt Flag Status" "0: Corresponding Common FIFO One Frame TX..,1: Corresponding Common FIFO One Frame TX..,?..."
rgroup.long 0x2C0++0x03
line.long 0x00 "CFDCFMOWSTS,Common FIFO Message Overwrite Status Register"
bitfld.long 0x00 0.--5. "CFXMOW,Common FIFO Massage Overwrite Status" "0: Corresponding FIFO Overwrite flag not set,1: Corresponding FIFO Overwrite flag set,?..."
rgroup.long 0x2C4++0x03
line.long 0x00 "CFDFFFSTS,FIFO FDC Full Status Register"
bitfld.long 0x00 8.--13. "CFXFFLL,COMMON FIFO FDC Level Full Status" "0: Corresponding FIFO full interrupt not set,1: Corresponding FIFO full interrupt set,?..."
hexmask.long.byte 0x00 0.--7. 1. "RFXFFLL,RX FIFO FDC Level Full Status"
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x2D0)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x2E0)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x2F0)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x300)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x310)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x320)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x330)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x340)++0x00
line.byte 0x00 "CFDTMC$1,TX Message Buffer Control Register"
bitfld.byte 0x00 2. "TMOM,TX Message Buffer One-shot Mode" "0: TX message buffer not configured in one-shot..,1: TX message buffer configured in one-shot mode"
bitfld.byte 0x00 1. "TMTAR,TX Message Buffer Transmission Abort Request" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
newline
bitfld.byte 0x00 0. "TMTR,TX Message Buffer Transmission Request" "0: TX Message buffer transmission not requested,1: TX message buffer transmission requested"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x7D0)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x7E0)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x7F0)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x800)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x810)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x820)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x830)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F )
group.byte ($2+0x840)++0x00
line.byte 0x00 "CFDTMSTS$1,TX Message Buffer Status Register"
rbitfld.byte 0x00 4. "TMTARM,TX Message Buffer Transmission Abort Request Mirrored" "0: TX message buffer transmission request abort..,1: TX message buffer transmission request abort.."
rbitfld.byte 0x00 3. "TMTRM,TX Message Buffer Transmission Request Mirrored" "0: TX message buffer transmission not requested,1: TX message buffer transmission requested"
newline
bitfld.byte 0x00 1.--2. "TMTRF,TX Message Buffer Transmission Result Flag" "0: No result,1: Transmission aborted from the TX message buffer,2: Transmission successful from the TX message..,3: Transmission successful from the TX message.."
rbitfld.byte 0x00 0. "TMTSTS,TX Message Buffer Transmission Status" "0: No on-going transmission,1: On-going transmission"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
rgroup.long ($2+0xCD0)++0x03
line.long 0x00 "CFDTMTRSTS$1,TX Message Buffer Transmission Request Status Register"
hexmask.long.word 0x00 0.--15. 1. "TMTRSTS,TX Message Buffer Transmission Request Status"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
rgroup.long ($2+0xD70)++0x03
line.long 0x00 "CFDTMTARSTS$1,TX Message Buffer Transmission Abort Request Status Register"
hexmask.long.word 0x00 0.--15. 1. "TMTARSTS,TX Message Buffer Transmission Abort Request Status"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
rgroup.long ($2+0xE10)++0x03
line.long 0x00 "CFDTMTCSTS$1,TX Message Buffer Transmission Completion Status Register"
hexmask.long.word 0x00 0.--15. 1. "TMTCSTS,TX Message Buffer Transmission Completion Status"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
rgroup.long ($2+0xEB0)++0x03
line.long 0x00 "CFDTMTASTS$1,TX Message Buffer Transmission Abort Status Register"
hexmask.long.word 0x00 0.--15. 1. "TMTASTS,TX Message Buffer Transmission Abort Status"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0xF50)++0x03
line.long 0x00 "CFDTMIEC$1,TX Message Buffer Transmission Interrupt Enable Register"
hexmask.long.word 0x00 0.--15. 1. "TMIE,TX Message Buffer Interrupt Enable"
repeat.end
repeat 2. (strings "00" "01" )(list 0x00 0x04 )
group.long ($2+0x1000)++0x03
line.long 0x00 "CFDTXQCC$1,TX Queue Configuration/Control Register 0"
bitfld.long 0x00 18. "TXQOFTXIE,TXQ One Frame Transmission Interrupt Enable" "0: One Frame TX interrupt generation disabled,1: One Frame TX interrupt generation enabled"
bitfld.long 0x00 17. "TXQOFRXIE,TXQ One Frame Reception Interrupt Enable" "0: One Frame RX interrupt generation disabled,1: One Frame RX interrupt generation enabled"
newline
bitfld.long 0x00 16. "TXQFIE,TXQ Full Interrupt Enable" "0: TX Queue full interrupt generation disabled,1: TX Queue full interrupt generation enabled"
bitfld.long 0x00 8.--12. "TXQDC,TX Queue Depth Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 7. "TXQIM,TX Queue Interrupt Mode" "0: When the last message is successfully..,1: At every successful transmission"
bitfld.long 0x00 5. "TXQTXIE,TX Queue TX Interrupt Enable" "0: TX Queue TX interrupt disabled,1: TX Queue TX interrupt enabled"
newline
bitfld.long 0x00 2. "TXQOWE,TX Queue Overwrite Mode Enable" "0: TX Queue OW mode disabled,1: TX Queue OW mode enabled"
bitfld.long 0x00 1. "TXQGWE,TX Queue Gateway Mode Enable" "0: TX Queue GW mode disabled,1: TX Queue GW mode enabled"
newline
bitfld.long 0x00 0. "TXQE,TX Queue Enable" "0: TX Queue disabled,1: TX Queue enabled"
repeat.end
repeat 2. (strings "00" "01" )(list 0x00 0x04 )
group.long ($2+0x1020)++0x03
line.long 0x00 "CFDTXQSTS$1,TX Queue Status Register 0"
bitfld.long 0x00 20. "TXQMOW,TXQ Message Over" "0: No message overwrite in TXQ,1: Message overwrite in TXQ"
bitfld.long 0x00 19. "TXQMLT,TXQ Message Lost" "0: No message lost in TXQ,1: TXQ message lost"
newline
bitfld.long 0x00 18. "TXQOFTXIF,TXQ One Frame Transmission Interrupt Flag" "0,1"
bitfld.long 0x00 17. "TXQOFRXIF,TXQ One Frame Reception Interrupt Flag" "0,1"
newline
bitfld.long 0x00 16. "TXQFIF,TXQ Full Interrupt Flag" "0,1"
rbitfld.long 0x00 8.--13. "TXQMC,TX Queue Message Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 2. "TXQTXIF,TX Queue TX Interrupt Flag" "0: TX Queue interrupt condition not satisfied..,1: TX Queue interrupt condition satisfied after.."
rbitfld.long 0x00 1. "TXQFLL,TX Queue Full" "0: TX Queue not full,1: TX Queue full"
newline
rbitfld.long 0x00 0. "TXQEMP,TX Queue Empty" "0: TX Queue not empty,1: TX Queue empty"
repeat.end
repeat 2. (strings "00" "01" )(list 0x00 0x04 )
wgroup.long ($2+0x1040)++0x03
line.long 0x00 "CFDTXQPCTR$1,TX Queue Pointer Control Register 0"
hexmask.long.byte 0x00 0.--7. 1. "TXQPC,TX Queue Pointer Control"
repeat.end
repeat 2. (strings "10" "11" )(list 0x00 0x04 )
group.long ($2+0x1060)++0x03
line.long 0x00 "CFDTXQCC$1,TX Queue Configuration/Control Register 1"
bitfld.long 0x00 18. "TXQOFTXIE,TXQ One Frame Transmission Interrupt Enable" "0: One Frame TX interrupt generation disabled,1: One Frame TX interrupt generation enabled"
bitfld.long 0x00 17. "TXQOFRXIE,TXQ One Frame Reception Interrupt Enable" "0: One Frame RX interrupt generation disabled,1: One Frame RX interrupt generation enabled"
newline
bitfld.long 0x00 16. "TXQFIE,TXQ Full Interrupt Enable" "0: TX Queue full interrupt generation disabled,1: TX Queue full interrupt generation enabled"
bitfld.long 0x00 8.--12. "TXQDC,TX Queue Depth Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 7. "TXQIM,TX Queue Interrupt Mode" "0: When the last message is successfully..,1: At every successful transmission"
bitfld.long 0x00 5. "TXQTXIE,TX Queue TX Interrupt Enable" "0: TX Queue TX interrupt disabled,1: TX Queue TX interrupt enabled"
newline
bitfld.long 0x00 2. "TXQOWE,TX Queue Overwrite Mode Enable" "0: TX Queue OW mode disabled,1: TX Queue OW mode enabled"
bitfld.long 0x00 1. "TXQGWE,TX Queue Gateway Mode Enable" "0: TX Queue GW mode disabled,1: TX Queue GW mode enabled"
newline
bitfld.long 0x00 0. "TXQE,TX Queue Enable" "0: TX Queue disabled,1: TX Queue enabled"
repeat.end
repeat 2. (strings "10" "11" )(list 0x00 0x04 )
group.long ($2+0x1080)++0x03
line.long 0x00 "CFDTXQSTS$1,TX Queue Status Register 1"
bitfld.long 0x00 20. "TXQMOW,TXQ Message Over" "0: No message overwrite in TXQ,1: Message overwrite in TXQ"
bitfld.long 0x00 19. "TXQMLT,TXQ Message Lost" "0: No message lost in TXQ,1: TXQ message lost"
newline
bitfld.long 0x00 18. "TXQOFTXIF,TXQ One Frame Transmission Interrupt Flag" "0,1"
bitfld.long 0x00 17. "TXQOFRXIF,TXQ One Frame Reception Interrupt Flag" "0,1"
newline
bitfld.long 0x00 16. "TXQFIF,TXQ Full Interrupt Flag" "0,1"
rbitfld.long 0x00 8.--13. "TXQMC,TX Queue Message Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 2. "TXQTXIF,TX Queue TX Interrupt Flag" "0: TX Queue interrupt condition not satisfied..,1: TX Queue interrupt condition satisfied after.."
rbitfld.long 0x00 1. "TXQFLL,TX Queue Full" "0: TX Queue not full,1: TX Queue full"
newline
rbitfld.long 0x00 0. "TXQEMP,TX Queue Empty" "0: TX Queue not empty,1: TX Queue empty"
repeat.end
repeat 2. (strings "10" "11" )(list 0x00 0x04 )
wgroup.long ($2+0x10A0)++0x03
line.long 0x00 "CFDTXQPCTR$1,TX Queue Pointer Control Register 1"
hexmask.long.byte 0x00 0.--7. 1. "TXQPC,TX Queue Pointer Control"
repeat.end
repeat 2. (strings "20" "21" )(list 0x00 0x04 )
group.long ($2+0x10C0)++0x03
line.long 0x00 "CFDTXQCC$1,TX Queue Configuration/Control Register 2"
bitfld.long 0x00 18. "TXQOFTXIE,TXQ One Frame Transmission Interrupt Enable" "0: One Frame TX interrupt generation disabled,1: One Frame TX interrupt generation enabled"
bitfld.long 0x00 17. "TXQOFRXIE,TXQ One Frame Reception Interrupt Enable" "0: One Frame RX interrupt generation disabled,1: One Frame RX interrupt generation enabled"
newline
bitfld.long 0x00 16. "TXQFIE,TXQ Full Interrupt Enable" "0: TX Queue full interrupt generation disabled,1: TX Queue full interrupt generation enabled"
bitfld.long 0x00 8.--12. "TXQDC,TX Queue Depth Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 7. "TXQIM,TX Queue Interrupt Mode" "0: When the last message is successfully..,1: At every successful transmission"
bitfld.long 0x00 5. "TXQTXIE,TX Queue TX Interrupt Enable" "0: TX Queue TX interrupt disabled,1: TX Queue TX interrupt enabled"
newline
bitfld.long 0x00 2. "TXQOWE,TX Queue Overwrite Mode Enable" "0: TX Queue OW mode disabled,1: TX Queue OW mode enabled"
bitfld.long 0x00 1. "TXQGWE,TX Queue Gateway Mode Enable" "0: TX Queue GW mode disabled,1: TX Queue GW mode enabled"
newline
bitfld.long 0x00 0. "TXQE,TX Queue Enable" "0: TX Queue disabled,1: TX Queue enabled"
repeat.end
repeat 2. (strings "20" "21" )(list 0x00 0x04 )
group.long ($2+0x10E0)++0x03
line.long 0x00 "CFDTXQSTS$1,TX Queue Status Register 2"
bitfld.long 0x00 20. "TXQMOW,TXQ Message Over" "0: No message overwrite in TXQ,1: Message overwrite in TXQ"
bitfld.long 0x00 19. "TXQMLT,TXQ Message Lost" "0: No message lost in TXQ,1: TXQ message lost"
newline
bitfld.long 0x00 18. "TXQOFTXIF,TXQ One Frame Transmission Interrupt Flag" "0,1"
bitfld.long 0x00 17. "TXQOFRXIF,TXQ One Frame Reception Interrupt Flag" "0,1"
newline
bitfld.long 0x00 16. "TXQFIF,TXQ Full Interrupt Flag" "0,1"
rbitfld.long 0x00 8.--13. "TXQMC,TX Queue Message Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 2. "TXQTXIF,TX Queue TX Interrupt Flag" "0: TX Queue interrupt condition not satisfied..,1: TX Queue interrupt condition satisfied after.."
rbitfld.long 0x00 1. "TXQFLL,TX Queue Full" "0: TX Queue not full,1: TX Queue full"
newline
rbitfld.long 0x00 0. "TXQEMP,TX Queue Empty" "0: TX Queue not empty,1: TX Queue empty"
repeat.end
repeat 2. (strings "20" "21" )(list 0x00 0x04 )
wgroup.long ($2+0x1100)++0x03
line.long 0x00 "CFDTXQPCTR$1,TX Queue Pointer Control Register 2"
hexmask.long.byte 0x00 0.--7. 1. "TXQPC,TX Queue Pointer Control"
repeat.end
repeat 2. (strings "30" "31" )(list 0x00 0x04 )
group.long ($2+0x1120)++0x03
line.long 0x00 "CFDTXQCC$1,TX Queue Configuration/Control Register 3"
bitfld.long 0x00 18. "TXQOFTXIE,TXQ One Frame Transmission Interrupt Enable" "0: One Frame TX interrupt generation disabled,1: One Frame TX interrupt generation enabled"
bitfld.long 0x00 8.--12. "TXQDC,TX Queue Depth Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 7. "TXQIM,TX Queue Interrupt Mode" "0: When the last message is successfully..,1: At every successful transmission"
bitfld.long 0x00 5. "TXQTXIE,TX Queue TX Interrupt Enable" "0: TX Queue TX interrupt disabled,1: TX Queue TX interrupt enabled"
newline
bitfld.long 0x00 2. "TXQOWE,TX Queue Overwrite Mode Enable" "0: TX Queue OW mode disabled,1: TX Queue OW mode enabled"
bitfld.long 0x00 0. "TXQE,TX Queue Enable" "0: TX Queue disabled,1: TX Queue enabled"
repeat.end
repeat 2. (strings "30" "31" )(list 0x00 0x04 )
group.long ($2+0x1140)++0x03
line.long 0x00 "CFDTXQSTS$1,TX Queue Status Register 3"
bitfld.long 0x00 20. "TXQMOW,TXQ Message Over" "0: No message overwrite in TXQ,1: Message overwrite in TXQ"
bitfld.long 0x00 18. "TXQOFTXIF,TXQ One Frame Transmission Interrupt Flag" "0,1"
newline
rbitfld.long 0x00 8.--13. "TXQMC,TX Queue Message Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 2. "TXQTXIF,TX Queue TX Interrupt Flag" "0: TX Queue interrupt condition not satisfied..,1: TX Queue interrupt condition satisfied after.."
newline
rbitfld.long 0x00 1. "TXQFLL,TX Queue Full" "0: TX Queue not full,1: TX Queue full"
rbitfld.long 0x00 0. "TXQEMP,TX Queue Empty" "0: TX Queue not empty,1: TX Queue empty"
repeat.end
repeat 2. (strings "30" "31" )(list 0x00 0x04 )
wgroup.long ($2+0x1160)++0x03
line.long 0x00 "CFDTXQPCTR$1,TX Queue Pointer Control Register 3"
hexmask.long.byte 0x00 0.--7. 1. "TXQPC,TX Queue Pointer Control"
repeat.end
rgroup.long 0x1180++0x03
line.long 0x00 "CFDTXQESTS,TX Queue Empty Status Register"
hexmask.long.byte 0x00 0.--7. 1. "TXQxEMP,TXQ Empty Status"
rgroup.long 0x1184++0x03
line.long 0x00 "CFDTXQFISTS,TX Queue Full Interrupt Status Register"
bitfld.long 0x00 4.--6. "TXQ1FULL,TXQ Full Interrupt Status Flag for Channel 1" "0: TXQ full interrupt not set,1: TXQ full interrupt set,?..."
bitfld.long 0x00 0.--2. "TXQ0FULL,TXQ Full Interrupt Status Flag for Channel 0" "0: TXQ full interrupt not set,1: TXQ full interrupt set,?..."
rgroup.long 0x1188++0x03
line.long 0x00 "CFDTXQMSTS,TX Queue Message Lost Status Register"
bitfld.long 0x00 4.--6. "TXQ1ML,TXQ Message Lost Status Flag for Channel 1" "0: TXQ message lost flag not set,1: TXQ message lost flag set,?..."
bitfld.long 0x00 0.--2. "TXQ0ML,TXQ Message Lost Status Flag for Channel 0" "0: TXQ message lost flag not set,1: TXQ message lost flag set,?..."
rgroup.long 0x1190++0x03
line.long 0x00 "CFDTXQISTS,TX Queue Interrupt Status Register"
bitfld.long 0x00 4.--7. "TXQ1ISF,TXQ Interrupt Status Flag for Channel 1" "0: TXQ Interrupt flag not set,1: TXQ Interrupt flag set,?..."
bitfld.long 0x00 0.--3. "TXQ0ISF,TXQ Interrupt Status Flag for Channel 0" "0: TXQ Interrupt flag not set,1: TXQ Interrupt flag set,?..."
rgroup.long 0x1194++0x03
line.long 0x00 "CFDTXQOFTISTS,TX Queue One Frame TX Interrupt Status Register"
bitfld.long 0x00 4.--7. "TXQ1OFTISF,TXQ One Frame TX Interrupt Status Flag for Channel 1" "0: TXQ One Frame TX Interrupt flag not set,1: TXQ One Frame TX Interrupt flag set,?..."
bitfld.long 0x00 0.--3. "TXQ0OFTISF,TXQ One Frame TX Interrupt Status Flag for Channel 0" "0: TXQ One Frame TX Interrupt flag not set,1: TXQ One Frame TX Interrupt flag set,?..."
rgroup.long 0x1198++0x03
line.long 0x00 "CFDTXQOFRISTS,TX Queue One Frame RX Interrupt Status Register"
bitfld.long 0x00 4.--6. "TXQ1OFRISF,TXQ One Frame RX Interrupt Status Flag for Channel 1" "0: TXQ One Frame RX Interrupt flag not set,1: TXQ One Frame RX Interrupt flag set,?..."
bitfld.long 0x00 0.--2. "TXQ0OFRISF,TXQ One Frame RX Interrupt Status Flag for Channel 0" "0: TXQ One Frame RX Interrupt flag not set,1: TXQ One Frame RX Interrupt flag set,?..."
rgroup.long 0x119C++0x03
line.long 0x00 "CFDTXQFSTS,TX Queue Full Status Register"
bitfld.long 0x00 4.--7. "TXQ1FSF,TXQ Full Status Flag for Channel 1" "0: TXQ Full flag not set,1: TXQ Full flag set,?..."
bitfld.long 0x00 0.--3. "TXQ0FSF,TXQ Full Status Flag for Channel 0" "0: TXQ Full flag not set,1: TXQ Full flag set,?..."
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
group.long ($2+0x1200)++0x03
line.long 0x00 "CFDTHLCC$1,TX History List Configuration/Control Register"
bitfld.long 0x00 11. "THLDGE,TX History List Dedicated Gateway Enable" "0: Not dedicated Gateway FIFO + Gateway TX Queue,1: Dedicated Gateway FIFO + Gateway TX Queue"
bitfld.long 0x00 10. "THLDTE,TX History List Dedicated TX Enable" "0: TX FIFO + TX Queue,1: Flat TX MB + TX FIFO + TX Queue"
newline
bitfld.long 0x00 9. "THLIM,TX History List Interrupt Mode" "0: Interrupt generated if TX History List level..,1: Interrupt generated for every successfully.."
bitfld.long 0x00 8. "THLIE,TX History List Interrupt Enable" "0: TX History List Interrupt disabled,1: TX History List Interrupt enabled"
newline
bitfld.long 0x00 0. "THLE,TX History List Enable" "0: TX History List disabled,1: TX History List enabled"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
group.long ($2+0x1220)++0x03
line.long 0x00 "CFDTHLSTS$1,TX History List Status Register"
rbitfld.long 0x00 8.--13. "THLMC,TX History List Message Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 3. "THLIF,TX History List Interrupt Flag" "0: TX History List interrupt condition not..,1: TX History List interrupt condition satisfied"
newline
bitfld.long 0x00 2. "THLELT,TX History List Entry Lost" "0: No entry lost in TX History List,1: TX History List entry Lost"
rbitfld.long 0x00 1. "THLFLL,TX History List Full" "0: TX History List not full,1: TX History List full"
newline
rbitfld.long 0x00 0. "THLEMP,TX History List Empty" "0: TX History List not empty,1: TX History List empty"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
wgroup.long ($2+0x1240)++0x03
line.long 0x00 "CFDTHLPCTR$1,TX History List Pointer Control Register"
hexmask.long.byte 0x00 0.--7. 1. "THLPC,TX History List Pointer Control"
repeat.end
rgroup.long 0x1300++0x03
line.long 0x00 "CFDGTINTSTS0,Global TX Interrupt Status Register 0"
bitfld.long 0x00 14. "CFOTIF1,COM FIFO One Frame Transmission Interrupt Flag Channel 1" "0: Channel 1 COM FIFO One Frame Transmission..,1: Channel 1 COM FIFO One Frame Transmission.."
bitfld.long 0x00 13. "TQOFIF1,TX Queue One Frame Transmission Interrupt Flag Channel 1" "0: Channel 1 TX Queue One Frame Transmission..,1: Channel 1 TX Queue One Frame Transmission.."
newline
bitfld.long 0x00 12. "THIF1,TX History List Interrupt Channel 1" "0: Channel 1 TX History List Interrupt flag not..,1: Channel 1 TX History List Interrupt flag set"
bitfld.long 0x00 11. "CFTIF1,COM FIFO TX/GW Mode Interrupt Flag Channel 1" "0: Channel 1 COM FIFO TX/GW Mode Interrupt flag..,1: Channel 1 COM FIFO TX/GW Mode Interrupt flag.."
newline
bitfld.long 0x00 10. "TQIF1,TX Queue Interrupt Flag Channel 1" "0: Channel 1 TX Queue Interrupt flag not set,1: Channel 1 TX Queue Interrupt flag set"
bitfld.long 0x00 9. "TAIF1,TX Abort Interrupt Flag Channel 1" "0: Channel 1 TX Abort Interrupt flag not set,1: Channel 1 TX Abort Interrupt flag set"
newline
bitfld.long 0x00 8. "TSIF1,TX Successful Interrupt Flag Channel 1" "0: Channel 1 TX Successful Interrupt flag not set,1: Channel 1 TX Successful Interrupt flag set"
bitfld.long 0x00 6. "CFOTIF0,COM FIFO One Frame Transmission Interrupt Flag Channel 0" "0: Channel 0 COM FIFO One Frame Transmission..,1: Channel 0 COM FIFO One Frame Transmission.."
newline
bitfld.long 0x00 5. "TQOFIF0,TX Queue One Frame Transmission Interrupt Flag Channel 0" "0: Channel 0 TX Queue One Frame Transmission..,1: Channel 0 TX Queue One Frame Transmission.."
bitfld.long 0x00 4. "THIF0,TX History List Interrupt Channel 0" "0: Channel 0 TX History List Interrupt flag not..,1: Channel 0 TX History List Interrupt flag set"
newline
bitfld.long 0x00 3. "CFTIF0,COM FIFO TX/GW Mode Interrupt Flag Channel 0" "0: Channel 0 COM FIFO TX/GW Mode Interrupt flag..,1: Channel 0 COM FIFO TX/GW Mode Interrupt flag.."
bitfld.long 0x00 2. "TQIF0,TX Queue Interrupt Flag Channel 0" "0: Channel 0 TX Queue Interrupt flag not set,1: Channel 0 TX Queue Interrupt flag set"
newline
bitfld.long 0x00 1. "TAIF0,TX Abort Interrupt Flag Channel 0" "0: Channel 0 TX Abort Interrupt flag not set,1: Channel 0 TX Abort Interrupt flag set"
bitfld.long 0x00 0. "TSIF0,TX Successful Interrupt Flag Channel 0" "0: Channel 0 TX Successful Interrupt flag not set,1: Channel 0 TX Successful Interrupt flag set"
group.long 0x1308++0x03
line.long 0x00 "CFDGTSTCFG,Global Test Configuration Register"
hexmask.long.word 0x00 16.--25. 1. "RTMPS,RAM Test Mode Page Select"
bitfld.long 0x00 1. "C1ICBCE,Channel 1 Internal CAN Bus Communication Test Mode Enable" "0: Channel 1 internal CAN bus communication..,1: Channel 1 internal CAN bus communication.."
newline
bitfld.long 0x00 0. "C0ICBCE,Channel 0 Internal CAN Bus Communication Test Mode Enable" "0: Channel 0 internal CAN bus communication..,1: Channel 0 internal CAN bus communication.."
group.long 0x130C++0x03
line.long 0x00 "CFDGTSTCTR,Global Test Control Register"
bitfld.long 0x00 2. "RTME,RAM Test Mode Enable" "0: RAM test mode disabled,1: RAM test mode enabled"
bitfld.long 0x00 0. "ICBCTME,Internal CAN Bus Communication Test Mode Enable" "0: Internal CAN Bus Communication test mode..,1: Internal CAN Bus Communication test mode.."
group.long 0x1314++0x03
line.long 0x00 "CFDGFDCFG,Global FD Configuration Register"
bitfld.long 0x00 8.--9. "TSCCFG,Timestamp Capture Configuration" "0: Timestamp capture at the sample point of SOF..,1: Timestamp capture at frame valid indication,2: Timestamp capture at the sample point of RES..,3: Reserved"
bitfld.long 0x00 0. "RPED,RES Bit Protocol Exception Disable" "0: Protocol exception event detection enabled,1: Protocol exception event detection disabled"
wgroup.long 0x131C++0x03
line.long 0x00 "CFDGLOCKK,Global Lock Key Register"
hexmask.long.word 0x00 0.--15. 1. "LOCK,Lock Key"
group.long 0x1330++0x03
line.long 0x00 "CFDCDTCT,DMA Transfer Control Register"
bitfld.long 0x00 9. "CFDMAE1,DMA Transfer Enable for Common FIFO 0 of Channel 1" "0: DMA transfer request disabled,1: DMA transfer request enabled"
bitfld.long 0x00 8. "CFDMAE0,DMA Transfer Enable for Common FIFO 0 of Channel 0" "0: DMA transfer request disabled,1: DMA transfer request enabled"
newline
bitfld.long 0x00 7. "RFDMAE7,DMA Transfer Enable for RX FIFO 7" "0: DMA transfer request disabled,1: DMA transfer request enabled"
bitfld.long 0x00 6. "RFDMAE6,DMA Transfer Enable for RX FIFO 6" "0: DMA transfer request disabled,1: DMA transfer request enabled"
newline
bitfld.long 0x00 5. "RFDMAE5,DMA Transfer Enable for RX FIFO 5" "0: DMA transfer request disabled,1: DMA transfer request enabled"
bitfld.long 0x00 4. "RFDMAE4,DMA Transfer Enable for RX FIFO 4" "0: DMA transfer request disabled,1: DMA transfer request enabled"
newline
bitfld.long 0x00 3. "RFDMAE3,DMA Transfer Enable for RX FIFO 3" "0: DMA transfer request disabled,1: DMA transfer request enabled"
bitfld.long 0x00 2. "RFDMAE2,DMA Transfer Enable for RX FIFO 2" "0: DMA transfer request disabled,1: DMA transfer request enabled"
newline
bitfld.long 0x00 1. "RFDMAE1,DMA Transfer Enable for RX FIFO 1" "0: DMA transfer request disabled,1: DMA transfer request enabled"
bitfld.long 0x00 0. "RFDMAE0,DMA Transfer Enable for RX FIFO 0" "0: DMA transfer request disabled,1: DMA transfer request enabled"
rgroup.long 0x1334++0x03
line.long 0x00 "CFDCDTSTS,DMA Transfer Status Register"
bitfld.long 0x00 9. "CFDMASTS1,DMA Transfer Status only for Common FIFO 0 of Channel 1" "0: DMA transfer stopped,1: DMA transfer on going"
bitfld.long 0x00 8. "CFDMASTS0,DMA Transfer Status only for Common FIFO 0 of Channel 0" "0: DMA transfer stopped,1: DMA transfer on going"
newline
bitfld.long 0x00 7. "RFDMASTS7,DMA Transfer Status for RX FIFO 7" "0: DMA transfer stopped,1: DMA transfer on going"
bitfld.long 0x00 6. "RFDMASTS6,DMA Transfer Status for RX FIFO 6" "0: DMA transfer stopped,1: DMA transfer on going"
newline
bitfld.long 0x00 5. "RFDMASTS5,DMA Transfer Status for RX FIFO 5" "0: DMA transfer stopped,1: DMA transfer on going"
bitfld.long 0x00 4. "RFDMASTS4,DMA Transfer Status for RX FIFO 4" "0: DMA transfer stopped,1: DMA transfer on going"
newline
bitfld.long 0x00 3. "RFDMASTS3,DMA Transfer Status for RX FIFO 3" "0: DMA transfer stopped,1: DMA transfer on going"
bitfld.long 0x00 2. "RFDMASTS2,DMA Transfer Status for RX FIFO 2" "0: DMA transfer stopped,1: DMA transfer on going"
newline
bitfld.long 0x00 1. "RFDMASTS1,DMA Transfer Status for RX FIFO 1" "0: DMA transfer stopped,1: DMA transfer on going"
bitfld.long 0x00 0. "RFDMASTS0,DMA Transfer Status for RX FIFO 0" "0: DMA transfer stopped,1: DMA transfer on going"
group.long 0x1340++0x03
line.long 0x00 "CFDCDTTCT,DMA TX Transfer Control Register"
bitfld.long 0x00 17. "CFDMAE1,DMA TX Transfer Enable for Common FIFO 2 of Channel 1" "0: DMA TX transfer request disabled,1: DMA TX transfer request enabled"
bitfld.long 0x00 16. "CFDMAE0,DMA TX Transfer Enable for Common FIFO 2 of Channel 0" "0: DMA TX transfer request disabled,1: DMA TX transfer request enabled"
newline
bitfld.long 0x00 9. "TQ3DMAE1,DMA TX Transfer Enable for TXQ 3 of Channel 1" "0: DMA TX transfer request disabled,1: DMA TX transfer request enabled"
bitfld.long 0x00 8. "TQ3DMAE0,DMA TX Transfer Enable for TXQ 3 of Channel 0" "0: DMA TX transfer request disabled,1: DMA TX transfer request enabled"
newline
bitfld.long 0x00 1. "TQ0DMAE1,DMA TX Transfer Enable for TXQ 0 of Channel 1" "0: DMA TX transfer request disabled,1: DMA TX transfer request enabled"
bitfld.long 0x00 0. "TQ0DMAE0,DMA TX Transfer Enable for TXQ 0 of Channel 0" "0: DMA TX transfer request disabled,1: DMA TX transfer request enabled"
rgroup.long 0x1344++0x03
line.long 0x00 "CFDCDTTSTS,DMA TX Transfer Status Register"
bitfld.long 0x00 17. "CFDMASTS1,DMA TX Transfer Status for Common FIFO 2 of Channel 1" "0: DMA TX transfer stopped,1: DMA TX transfer enabled"
bitfld.long 0x00 16. "CFDMASTS0,DMA TX Transfer Status for Common FIFO 2 of Channel 0" "0: DMA TX transfer stopped,1: DMA TX transfer enabled"
newline
bitfld.long 0x00 9. "TQ3DMASTS1,DMA TX Transfer Status for TXQ3 of Channel 1" "0: DMA TX transfer stopped,1: DMA TX transfer enabled"
bitfld.long 0x00 8. "TQ3DMASTS0,DMA TX Transfer Status for TXQ3 of Channel 0" "0: DMA TX transfer stopped,1: DMA TX transfer enabled"
newline
bitfld.long 0x00 1. "TQ0DMASTS1,DMA TX Transfer Status for TXQ0 of Channel 1" "0: DMA TX transfer stopped,1: DMA TX transfer enabled"
bitfld.long 0x00 0. "TQ0DMASTS0,DMA TX Transfer Status for TXQ0 of Channel 0" "0: DMA TX transfer stopped,1: DMA TX transfer enabled"
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
rgroup.long ($2+0x1350)++0x03
line.long 0x00 "CFDGRINTSTS$1,Global RX Interrupt Status Register"
bitfld.long 0x00 28.--30. "CFOFRIF,Common FIFO One Frame RX Interrupt Flag Channel n (n = 0 1)" "0: Corresponding Common FIFO One Frame RX..,1: Corresponding Common FIFO One Frame RX..,?..."
bitfld.long 0x00 24.--26. "CFRFIF,Common FIFO FDC Level Full Interrupt Flag Channel n (n = 0 1)" "0: Corresponding Common FIFO Full Interrupt flag..,1: Corresponding Common FIFO Full Interrupt flag..,?..."
newline
bitfld.long 0x00 16.--18. "CFRIF,Common FIFO RX Interrupt Flag Channel n (n = 0 1)" "0: Corresponding Common FIFO RX Interrupt flag..,1: Corresponding Common FIFO RX Interrupt flag..,?..."
bitfld.long 0x00 12.--13. "BQOFRIF,Borrowed TXQ One Frame RX Interrupt Flag Channel n (n = 0 1)" "0: Corresponding TXQ One Frame RX Interrupt flag..,1: Corresponding TXQ One Frame RX Interrupt flag..,?..."
newline
bitfld.long 0x00 8.--10. "QOFRIF,TXQ One Frame RX Interrupt Flag Channel n (n = 0 1)" "0: Corresponding TXQ One Frame RX Interrupt flag..,1: Corresponding TXQ One Frame RX Interrupt flag..,?..."
bitfld.long 0x00 4.--5. "BQFIF,Borrowed TXQ Full Interrupt Flag Channel n (n = 0 1)" "0: Corresponding TXQ Full Interrupt flag is not..,1: Corresponding TXQ Full Interrupt flag is set,?..."
newline
bitfld.long 0x00 0.--2. "QFIF,TXQ Full Interrupt Flag Channel n (n = 0 1)" "0: Corresponding TXQ Full Interrupt flag is not..,1: Corresponding TXQ Full Interrupt flag is set,?..."
repeat.end
group.long 0x1380++0x03
line.long 0x00 "CFDGRSTC,Global Reset Control Register"
hexmask.long.byte 0x00 8.--15. 1. "KEY,Key Code"
bitfld.long 0x00 0. "SRST,Software Reset" "0: Normal state,1: Software reset state"
group.long 0x1384++0x03
line.long 0x00 "CFDGFCMC,Global Flexible CAN Mode Configuration Register"
bitfld.long 0x00 0. "FLXC0,Flexible CAN Mode between Channel 0 and Channel 1" "0: Normal mode,1: Flexible CAN mode"
group.long 0x138C++0x03
line.long 0x00 "CFDGFTBAC,Global Flexible Transmission Buffer Assignment Configuration Register"
bitfld.long 0x00 0.--3. "FLXMB0,Flexible Transmission Buffer Assignment between Channel 0 and Channel 1" "0: 0x0,1: 0x1,2: 0x2,3: 0x3,4: 0x4,5: 0x5,6: 0x6,7: 0x7,8: 0x8,?..."
group.long 0x1400++0x03
line.long 0x00 "CFDC0DCFG,Channel"
bitfld.long 0x00 24.--27. "DSJW,Data Bit Rate Resynchronization Jump Width Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "DTSEG2,Data Bit Rate Time Segment 2 Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--12. "DTSEG1,Data Bit Rate Time Segment 1 Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.byte 0x00 0.--7. 1. "DBRP,Data Bit Rate Prescaler Division Ratio Setting"
group.long 0x1420++0x03
line.long 0x00 "CFDC1DCFG,Channel"
bitfld.long 0x00 24.--27. "DSJW,Data Bit Rate Resynchronization Jump Width Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "DTSEG2,Data Bit Rate Time Segment 2 Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--12. "DTSEG1,Data Bit Rate Time Segment 1 Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.byte 0x00 0.--7. 1. "DBRP,Data Bit Rate Prescaler Division Ratio Setting"
group.long 0x1404++0x03
line.long 0x00 "CFDC0FDCFG,Channel"
bitfld.long 0x00 31. "CFDTE,CAN-FD Frame Distinction Enable" "0: CAN-FD frame distinction disabled,1: CAN-FD frame distinction enabled"
bitfld.long 0x00 30. "CLOE,Classical CAN-Only Enable" "0: Classical-only mode disabled,1: Classical-only mode enabled"
newline
bitfld.long 0x00 29. "REFE,RX Edge Filter Enable" "0: RX edge filter disabled,1: RX edge filter enabled"
bitfld.long 0x00 28. "FDOE,FD-Only Enable" "0: FD-only mode disabled,1: FD-only mode enabled"
newline
bitfld.long 0x00 26. "GWBRS,Gateway BRS Configuration Bit" "0: Gateway frame is transmitted with BRS = 0,1: Gateway frame is transmitted with BRS = 1"
bitfld.long 0x00 25. "GWFDF,Gateway FDF Configuration Bit" "0: Gateway frame is transmitted as Classical CAN..,1: Gateway frame is transmitted as CAN-FD frame"
newline
bitfld.long 0x00 24. "GWEN,CAN2.0 CAN-FD Multi Gateway Enable" "0: Multi gateway disabled,1: Multi gateway enabled"
hexmask.long.byte 0x00 16.--23. 1. "TDCO,Transceiver Delay Compensation Offset"
newline
bitfld.long 0x00 10. "ESIC,Error State Indication Configuration" "0: The ESI bit in the frame represents the error..,1: The ESI bit in the frame represents the error.."
bitfld.long 0x00 9. "TDCE,Transceiver Delay Compensation Enable" "0: Transceiver delay compensation disabled,1: Transceiver delay compensation enabled"
newline
bitfld.long 0x00 8. "TDCOC,Transmitter Delay Compensation Offset Configuration" "0: Measurement and offset,1: Offset-only"
bitfld.long 0x00 0.--2. "EOCCFG,Error Occurrence Counter Configuration" "0: All transmit messages and receive messages,1: All transmit messages,2: All receive messages,3: Setting prohibited,4: Only data phase of transmitted or received..,5: Only data phase of transmitted CANFD message,6: Only data phase of received CANFD message,7: Setting prohibited"
group.long 0x1424++0x03
line.long 0x00 "CFDC1FDCFG,Channel"
bitfld.long 0x00 31. "CFDTE,CAN-FD Frame Distinction Enable" "0: CAN-FD frame distinction disabled,1: CAN-FD frame distinction enabled"
bitfld.long 0x00 30. "CLOE,Classical CAN-Only Enable" "0: Classical-only mode disabled,1: Classical-only mode enabled"
newline
bitfld.long 0x00 29. "REFE,RX Edge Filter Enable" "0: RX edge filter disabled,1: RX edge filter enabled"
bitfld.long 0x00 28. "FDOE,FD-Only Enable" "0: FD-only mode disabled,1: FD-only mode enabled"
newline
bitfld.long 0x00 26. "GWBRS,Gateway BRS Configuration Bit" "0: Gateway frame is transmitted with BRS = 0,1: Gateway frame is transmitted with BRS = 1"
bitfld.long 0x00 25. "GWFDF,Gateway FDF Configuration Bit" "0: Gateway frame is transmitted as Classical CAN..,1: Gateway frame is transmitted as CAN-FD frame"
newline
bitfld.long 0x00 24. "GWEN,CAN2.0 CAN-FD Multi Gateway Enable" "0: Multi gateway disabled,1: Multi gateway enabled"
hexmask.long.byte 0x00 16.--23. 1. "TDCO,Transceiver Delay Compensation Offset"
newline
bitfld.long 0x00 10. "ESIC,Error State Indication Configuration" "0: The ESI bit in the frame represents the error..,1: The ESI bit in the frame represents the error.."
bitfld.long 0x00 9. "TDCE,Transceiver Delay Compensation Enable" "0: Transceiver delay compensation disabled,1: Transceiver delay compensation enabled"
newline
bitfld.long 0x00 8. "TDCOC,Transmitter Delay Compensation Offset Configuration" "0: Measurement and offset,1: Offset-only"
bitfld.long 0x00 0.--2. "EOCCFG,Error Occurrence Counter Configuration" "0: All transmit messages and receive messages,1: All transmit messages,2: All receive messages,3: Setting prohibited,4: Only data phase of transmitted or received..,5: Only data phase of transmitted CANFD message,6: Only data phase of received CANFD message,7: Setting prohibited"
group.long 0x1408++0x03
line.long 0x00 "CFDC0FDCTR,Channel"
bitfld.long 0x00 1. "SOCCLR,Successful Occurrence Counter Clear" "0: No successful occurrence counter clear,1: Clear successful occurrence counter"
bitfld.long 0x00 0. "EOCCLR,Error Occurrence Counter Clear" "0: No error occurrence counter clear,1: Clear error occurrence counter"
group.long 0x1428++0x03
line.long 0x00 "CFDC1FDCTR,Channel"
bitfld.long 0x00 1. "SOCCLR,Successful Occurrence Counter Clear" "0: No successful occurrence counter clear,1: Clear successful occurrence counter"
bitfld.long 0x00 0. "EOCCLR,Error Occurrence Counter Clear" "0: No error occurrence counter clear,1: Clear error occurrence counter"
group.long 0x140C++0x03
line.long 0x00 "CFDC0FDSTS,Channel"
hexmask.long.byte 0x00 24.--31. 1. "SOC,Successful Occurrence Counter"
hexmask.long.byte 0x00 16.--23. 1. "EOC,Error Occurrence Counter"
newline
bitfld.long 0x00 15. "TDCVF,Transceiver Delay Compensation Violation Flag" "0: Transceiver delay compensation violation has..,1: Transceiver delay compensation violation has.."
bitfld.long 0x00 9. "SOCO,Successful Occurrence Counter Overflow Flag" "0: Successful occurrence counter has not..,1: Successful occurrence counter has overflowed"
newline
bitfld.long 0x00 8. "EOCO,Error Occurrence Counter Overflow Flag" "0: Error occurrence counter has not overflowed,1: Error occurrence counter has overflowed"
hexmask.long.byte 0x00 0.--7. 1. "TDCR,Transceiver Delay Compensation Result"
group.long 0x142C++0x03
line.long 0x00 "CFDC1FDSTS,Channel"
hexmask.long.byte 0x00 24.--31. 1. "SOC,Successful Occurrence Counter"
hexmask.long.byte 0x00 16.--23. 1. "EOC,Error Occurrence Counter"
newline
bitfld.long 0x00 15. "TDCVF,Transceiver Delay Compensation Violation Flag" "0: Transceiver delay compensation violation has..,1: Transceiver delay compensation violation has.."
bitfld.long 0x00 9. "SOCO,Successful Occurrence Counter Overflow Flag" "0: Successful occurrence counter has not..,1: Successful occurrence counter has overflowed"
newline
bitfld.long 0x00 8. "EOCO,Error Occurrence Counter Overflow Flag" "0: Error occurrence counter has not overflowed,1: Error occurrence counter has overflowed"
hexmask.long.byte 0x00 0.--7. 1. "TDCR,Transceiver Delay Compensation Result"
rgroup.long 0x1410++0x03
line.long 0x00 "CFDC0FDCRC,Channel"
bitfld.long 0x00 25.--28. "SCNT,Stuff Bit Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.tbyte 0x00 0.--20. 1. "CRCREG,CRC Register Value"
rgroup.long 0x1430++0x03
line.long 0x00 "CFDC1FDCRC,Channel"
bitfld.long 0x00 25.--28. "SCNT,Stuff Bit Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.tbyte 0x00 0.--20. 1. "CRCREG,CRC Register Value"
group.long 0x1418++0x03
line.long 0x00 "CFDC0BLCT,Channel"
bitfld.long 0x00 8. "BLCLD,Bus Load Counter Load" "0,1"
bitfld.long 0x00 0. "BLCE,Bus Load Counter Enable" "0: Bus load counter disabled,1: Bus load counter enabled"
group.long 0x1438++0x03
line.long 0x00 "CFDC1BLCT,Channel"
bitfld.long 0x00 8. "BLCLD,Bus Load Counter Load" "0,1"
bitfld.long 0x00 0. "BLCE,Bus Load Counter Enable" "0: Bus load counter disabled,1: Bus load counter enabled"
rgroup.long 0x141C++0x03
line.long 0x00 "CFDC0BLSTS,Channel"
hexmask.long 0x00 3.--31. 1. "BLC,Bus Load Counter Status"
rgroup.long 0x143C++0x03
line.long 0x00 "CFDC1BLSTS,Channel"
hexmask.long 0x00 3.--31. 1. "BLC,Bus Load Counter Status"
repeat 16. (strings "" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xA0 0xB0 0xC0 0xD0 0xE0 0xF0 )
group.long ($2+0x1800)++0x03
line.long 0x00 "CFDGAFLID$1,Global Acceptance Filter List ID Register $1"
bitfld.long 0x00 31. "GAFLIDE,Global Acceptance Filter List Entry IDE Field" "0: Standard identifier of rule entry ID is valid..,1: Extended identifier of rule entry ID is valid.."
bitfld.long 0x00 30. "GAFLRTR,Global Acceptance Filter List Entry RTR Field" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "GAFLLB,Global Acceptance Filter List Entry Loopback Configuration" "0: Global Acceptance Filter List entry ID for..,1: Global Acceptance Filter List entry ID for.."
hexmask.long 0x00 0.--28. 1. "GAFLID,Global Acceptance Filter List Entry ID Field"
repeat.end
repeat 16. (strings "" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xA0 0xB0 0xC0 0xD0 0xE0 0xF0 )
group.long ($2+0x1804)++0x03
line.long 0x00 "CFDGAFLM$1,Global Acceptance Filter List Mask Register $1"
bitfld.long 0x00 31. "GAFLIDEM,Global Acceptance Filter List IDE Mask" "0: IDE bit is not used for ID matching,1: IDE bit is used for ID matching"
bitfld.long 0x00 30. "GAFLRTRM,Global Acceptance Filter List Entry RTR Mask" "0: RTR bit is not used for ID matching,1: RTR bit is used for ID matching"
newline
bitfld.long 0x00 29. "GAFLIFL1,Global Acceptance Filter List Information Label 1" "0,1"
hexmask.long 0x00 0.--28. 1. "GAFLIDM,Global Acceptance Filter List ID Mask Field"
repeat.end
repeat 16. (strings "0" "01" "02" "03" "04" "05" "06" "07" "08" "09" "010" "011" "012" "013" "014" "015" )(list 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xA0 0xB0 0xC0 0xD0 0xE0 0xF0 )
group.long ($2+0x1808)++0x03
line.long 0x00 "CFDGAFLP$1,Global Acceptance Filter List Pointer 0 Register"
hexmask.long.word 0x00 16.--31. 1. "GAFLPTR,Global Acceptance Filter List Pointer"
bitfld.long 0x00 15. "GAFLRMV,Global Acceptance Filter List RX Message Buffer Valid" "0: Single message buffer direction pointer is..,1: Single message buffer direction pointer is.."
newline
bitfld.long 0x00 8.--12. "GAFLRMDP,Global Acceptance Filter List RX Message Buffer Direction Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "GAFLIFL0,Global Acceptance Filter List Information Label 0" "0,1"
newline
bitfld.long 0x00 6. "GAFLSRD2,Global Acceptance Filter List Select Routing Destination 2" "0: Routing target is CFIFO2,1: Routing target is TX Queue 2 instead of CFIFO2"
bitfld.long 0x00 5. "GAFLSRD1,Global Acceptance Filter List Select Routing Destination 1" "0: Routing target is CFIFO1,1: Routing target is TX Queue 1 instead of CFIFO1"
newline
bitfld.long 0x00 4. "GAFLSRD0,Global Acceptance Filter List Select Routing Destination 0" "0: Routing target is CFIFO0,1: Routing target is TX Queue 0 instead of CFIFO0"
bitfld.long 0x00 0.--3. "GAFLDLC,Global Acceptance Filter List DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "1" "11" "12" "13" "14" "15" "16" "17" "18" "19" "110" "111" "112" "113" "114" "115" )(list 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xA0 0xB0 0xC0 0xD0 0xE0 0xF0 )
group.long ($2+0x180C)++0x03
line.long 0x00 "CFDGAFLP$1,Global Acceptance Filter List Pointer 1 Register"
hexmask.long.word 0x00 0.--13. 1. "GAFLFDP,Global Acceptance Filter List FIFO Direction Pointer"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2000)++0x03
line.long 0x00 "CFDRMID$1,RX Message Buffer ID Register"
bitfld.long 0x00 31. "RMIDE,RX Message Buffer IDE Bit" "0: STD-ID is stored,1: EXT-ID is stored"
bitfld.long 0x00 30. "RMRTR,RX Message Buffer RTR Bit" "0: Data frame,1: Remote frame"
newline
hexmask.long 0x00 0.--28. 1. "RMID,RX Message Buffer ID Field"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2800)++0x03
line.long 0x00 "CFDRMID$1,RX Message Buffer ID Register"
bitfld.long 0x00 31. "RMIDE,RX Message Buffer IDE Bit" "0: STD-ID is stored,1: EXT-ID is stored"
bitfld.long 0x00 30. "RMRTR,RX Message Buffer RTR Bit" "0: Data frame,1: Remote frame"
newline
hexmask.long 0x00 0.--28. 1. "RMID,RX Message Buffer ID Field"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x2004)++0x03
line.long 0x00 "CFDRMPTR$1,RX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "RMDLC,RX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "RMTS,RX Message Buffer Timestamp Field"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x2804)++0x03
line.long 0x00 "CFDRMPTR$1,RX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "RMDLC,RX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "RMTS,RX Message Buffer Timestamp Field"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x2008)++0x03
line.long 0x00 "CFDRMFDSTS$1,RX Message Buffer CAN-FD Status Register"
hexmask.long.word 0x00 16.--31. 1. "RMPTR,RX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "RMIFL,RX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "RMFDF,CAN FD Format bit" "0: Non CAN-FD frame received,1: CAN-FD frame received"
bitfld.long 0x00 1. "RMBRS,Bit Rate Switch bit" "0: CAN-FD frame received with no bit rate switch,1: CAN-FD frame received with bit rate switch"
newline
bitfld.long 0x00 0. "RMESI,Error State Indicator bit" "0: CAN-FD frame received from error active node,1: CAN-FD frame received from error passive node"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x2808)++0x03
line.long 0x00 "CFDRMFDSTS$1,RX Message Buffer CAN-FD Status Register"
hexmask.long.word 0x00 16.--31. 1. "RMPTR,RX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "RMIFL,RX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "RMFDF,CAN FD Format bit" "0: Non CAN-FD frame received,1: CAN-FD frame received"
bitfld.long 0x00 1. "RMBRS,Bit Rate Switch bit" "0: CAN-FD frame received with no bit rate switch,1: CAN-FD frame received with bit rate switch"
newline
bitfld.long 0x00 0. "RMESI,Error State Indicator bit" "0: CAN-FD frame received from error active node,1: CAN-FD frame received from error passive node"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x200C)++0x03
line.long 0x00 "CFDRMDF0_$1,RX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x280C)++0x03
line.long 0x00 "CFDRMDF0_$1,RX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2010)++0x03
line.long 0x00 "CFDRMDF1_$1,RX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2810)++0x03
line.long 0x00 "CFDRMDF1_$1,RX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2014)++0x03
line.long 0x00 "CFDRMDF2_$1,RX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2814)++0x03
line.long 0x00 "CFDRMDF2_$1,RX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2018)++0x03
line.long 0x00 "CFDRMDF3_$1,RX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2818)++0x03
line.long 0x00 "CFDRMDF3_$1,RX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x201C)++0x03
line.long 0x00 "CFDRMDF4_$1,RX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x281C)++0x03
line.long 0x00 "CFDRMDF4_$1,RX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2020)++0x03
line.long 0x00 "CFDRMDF5_$1,RX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2820)++0x03
line.long 0x00 "CFDRMDF5_$1,RX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2024)++0x03
line.long 0x00 "CFDRMDF6_$1,RX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2824)++0x03
line.long 0x00 "CFDRMDF6_$1,RX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2028)++0x03
line.long 0x00 "CFDRMDF7_$1,RX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2828)++0x03
line.long 0x00 "CFDRMDF7_$1,RX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x202C)++0x03
line.long 0x00 "CFDRMDF8_$1,RX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x282C)++0x03
line.long 0x00 "CFDRMDF8_$1,RX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2030)++0x03
line.long 0x00 "CFDRMDF9_$1,RX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2830)++0x03
line.long 0x00 "CFDRMDF9_$1,RX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2034)++0x03
line.long 0x00 "CFDRMDF10_$1,RX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2834)++0x03
line.long 0x00 "CFDRMDF10_$1,RX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2038)++0x03
line.long 0x00 "CFDRMDF11_$1,RX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2838)++0x03
line.long 0x00 "CFDRMDF11_$1,RX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x203C)++0x03
line.long 0x00 "CFDRMDF12_$1,RX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x283C)++0x03
line.long 0x00 "CFDRMDF12_$1,RX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2040)++0x03
line.long 0x00 "CFDRMDF13_$1,RX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2840)++0x03
line.long 0x00 "CFDRMDF13_$1,RX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2044)++0x03
line.long 0x00 "CFDRMDF14_$1,RX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2844)++0x03
line.long 0x00 "CFDRMDF14_$1,RX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2048)++0x03
line.long 0x00 "CFDRMDF15_$1,RX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
rgroup.long ($2+0x2848)++0x03
line.long 0x00 "CFDRMDF15_$1,RX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "RMDB_HH,RX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RMDB_HL,RX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMDB_LH,RX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RMDB_LL,RX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6000)++0x03
line.long 0x00 "CFDRFID$1,RX FIFO Access ID Register"
bitfld.long 0x00 31. "RFIDE,RX FIFO Buffer IDE bit" "0: STD-ID has been received,1: EXT-ID has been received"
bitfld.long 0x00 30. "RFRTR,RX FIFO Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
hexmask.long 0x00 0.--28. 1. "RFID,RX FIFO Buffer ID Field"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6004)++0x03
line.long 0x00 "CFDRFPTR$1,RX FIFO Access Pointer Register"
bitfld.long 0x00 28.--31. "RFDLC,RX FIFO Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "RFTS,RX FIFO Timestamp Value"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6008)++0x03
line.long 0x00 "CFDRFFDSTS$1,RX FIFO Access CAN-FD Status Register"
hexmask.long.word 0x00 16.--31. 1. "CFDRFPTR,RX FIFO Buffer Pointer Field"
bitfld.long 0x00 8.--9. "RFIFL,RX FIFO Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "RFFDF,CAN FD Format bit" "0: Non CAN-FD frame received,1: CAN-FD frame received"
bitfld.long 0x00 1. "RFBRS,Bit Rate Switch bit" "0: CAN-FD frame received with no bit rate switch,1: CAN-FD frame received with bit rate switch"
newline
bitfld.long 0x00 0. "RFESI,Error State Indicator bit" "0: CAN-FD frame received from error active node,1: CAN-FD frame received from error passive node"
repeat.end
repeat 8. (strings "00" "01" "02" "03" "04" "05" "06" "07" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x600C)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "60" "61" "62" "63" "64" "65" "66" "67" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x600C)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "70" "71" "72" "73" "74" "75" "76" "77" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x600C)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "10" "11" "12" "13" "14" "15" "16" "17" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6010)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "20" "21" "22" "23" "24" "25" "26" "27" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6014)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "30" "31" "32" "33" "34" "35" "36" "37" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6018)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x601C)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "50" "51" "52" "53" "54" "55" "56" "57" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6020)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "80" "81" "82" "83" "84" "85" "86" "87" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x602C)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "90" "91" "92" "93" "94" "95" "96" "97" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6030)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "100" "101" "102" "103" "104" "105" "106" "107" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6034)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "110" "111" "112" "113" "114" "115" "116" "117" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6038)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 11 Register 11"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x603C)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "130" "131" "132" "133" "134" "135" "136" "137" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6040)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "140" "141" "142" "143" "144" "145" "146" "147" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6044)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 8. (strings "150" "151" "152" "153" "154" "155" "156" "157" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 )
rgroup.long ($2+0x6048)++0x03
line.long 0x00 "CFDRFDF$1,RX FIFO Access Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "RFDB_HH,RX FIFO Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "RFDB_HL,RX FIFO Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "RFDB_LH,RX FIFO Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "RFDB_LL,RX FIFO Buffer Data Byte (4 ? p)"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6400)++0x03
line.long 0x00 "CFDCFID$1,Common FIFO Access ID Register"
bitfld.long 0x00 31. "CFIDE,Common FIFO Buffer IDE bit" "0: STD-ID is to be transmitted or has been..,1: EXT-ID is to be transmitted or has been.."
bitfld.long 0x00 30. "CFRTR,Common FIFO Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,THL Entry Enable" "0: Entry is not to be stored in THL after..,1: Entry is to be stored in THL after successful.."
hexmask.long 0x00 0.--28. 1. "CFID,Common FIFO Buffer ID Field"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6404)++0x03
line.long 0x00 "CFDCFPTR$1,Common FIFO Access Pointer Register"
bitfld.long 0x00 28.--31. "CFDLC,Common FIFO Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--15. 1. "CFTS,Common FIFO Timestamp Value"
repeat.end
repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6408)++0x03
line.long 0x00 "CFDCFFDCSTS$1,Common FIFO Access CAN-FD Control/Status Register"
hexmask.long.word 0x00 16.--31. 1. "CFPTR,Common FIFO Buffer Pointer Field"
bitfld.long 0x00 8.--9. "CFIFL,COMMON FIFO Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "CFFDF,CAN FD Format bit" "0: Non CAN-FD frame received or to transmit,1: CAN-FD frame received or to transmit"
bitfld.long 0x00 1. "CFBRS,Bit Rate Switch bit" "0: CAN-FD frame received or to transmit with no..,1: CAN-FD frame received or to transmit with bit.."
newline
bitfld.long 0x00 0. "CFESI,Error State Indicator bit" "0: CAN-FD frame received or to transmit by error..,1: CAN-FD frame received or to transmit by error.."
repeat.end
repeat 6. (strings "00" "01" "02" "03" "04" "05" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x640C)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6410)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "20" "21" "22" "23" "24" "25" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6414)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "30" "31" "32" "33" "34" "35" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6418)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "40" "41" "42" "43" "44" "45" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x641C)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "50" "51" "52" "53" "54" "55" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6420)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "60" "61" "62" "63" "64" "65" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6424)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "70" "71" "72" "73" "74" "75" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6428)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "80" "81" "82" "83" "84" "85" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x642C)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6430)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "100" "101" "102" "103" "104" "105" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6434)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "110" "111" "112" "113" "114" "115" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6438)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "120" "121" "122" "123" "124" "125" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x643C)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "130" "131" "132" "133" "134" "135" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6440)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "140" "141" "142" "143" "144" "145" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6444)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 6. (strings "150" "151" "152" "153" "154" "155" )(list 0x00 0x80 0x100 0x180 0x200 0x280 )
group.long ($2+0x6448)++0x03
line.long 0x00 "CFDCFDF$1,Common FIFO Access Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "CFDB_HH,Common FIFO Buffer Data Bytes (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "CFDB_HL,Common FIFO Buffer Data Bytes (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "CFDB_LH,Common FIFO Buffer Data Bytes (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "CFDB_LL,Common FIFO Buffer Data Bytes (4 ? p)"
repeat.end
repeat 2. (strings "00" "01" )(list 0x00 0x08 )
rgroup.long ($2+0x8000)++0x03
line.long 0x00 "CFDTHLACC$1,Channel"
hexmask.long.word 0x00 16.--31. 1. "TMTS,Transmit Timestamp"
bitfld.long 0x00 15. "TGW,Transmit Gateway Buffer Indication" "0: No transmission from gateway,1: Transmission from gateway"
newline
hexmask.long.byte 0x00 3.--9. 1. "BN,Buffer Number"
bitfld.long 0x00 0.--2. "BT,Buffer Type" "?,1: Flat TX message buffer,2: TX FIFO message buffer number and gateway..,?,4: TX Queue message buffer number,?..."
repeat.end
repeat 2. (strings "10" "11" )(list 0x00 0x08 )
rgroup.long ($2+0x8004)++0x03
line.long 0x00 "CFDTHLACC$1,Channel"
bitfld.long 0x00 16.--17. "TIFL,Transmit Information Label" "0,1,2,3"
hexmask.long.word 0x00 0.--15. 1. "TID,Transmit ID"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x8400)++0x03
line.long 0x00 "CFDRPGACC$1,RAM Test Page Access Register"
hexmask.long 0x00 0.--31. 1. "RDTA,RAM Data Test Access"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x8440)++0x03
line.long 0x00 "CFDRPGACC$1,RAM Test Page Access Register"
hexmask.long 0x00 0.--31. 1. "RDTA,RAM Data Test Access"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x8480)++0x03
line.long 0x00 "CFDRPGACC$1,RAM Test Page Access Register"
hexmask.long 0x00 0.--31. 1. "RDTA,RAM Data Test Access"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x84C0)++0x03
line.long 0x00 "CFDRPGACC$1,RAM Test Page Access Register"
hexmask.long 0x00 0.--31. 1. "RDTA,RAM Data Test Access"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10000)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10800)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11000)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11800)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12000)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12800)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13000)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13800)++0x03
line.long 0x00 "CFDTMID$1,TX Message Buffer ID Register"
bitfld.long 0x00 31. "TMIDE,TX Message Buffer IDE bit" "0: STD-ID is transmitted,1: EXT-ID is transmitted"
bitfld.long 0x00 30. "TMRTR,TX Message Buffer RTR bit" "0: Data frame,1: Remote frame"
newline
bitfld.long 0x00 29. "THLEN,Tx History List Entry" "0: Entry not stored in THL after successful TX,1: Entry stored in THL after successful TX"
hexmask.long 0x00 0.--28. 1. "TMID,TX Message Buffer ID Field"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10004)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10804)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11004)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11804)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12004)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12804)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13004)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13804)++0x03
line.long 0x00 "CFDTMPTR$1,TX Message Buffer Pointer Register"
bitfld.long 0x00 28.--31. "TMDLC,TX Message Buffer DLC Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10008)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10808)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11008)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11808)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12008)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12808)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13008)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13808)++0x03
line.long 0x00 "CFDTMFDCTR$1,TX Message Buffer CAN-FD Control Register"
hexmask.long.word 0x00 16.--31. 1. "TMPTR,TX Message Buffer Pointer Field"
bitfld.long 0x00 8.--9. "TMIFL,TX Message Buffer Information Label Field" "0,1,2,3"
newline
bitfld.long 0x00 2. "TMFDF,CAN FD Format bit" "0: Non CAN-FD frame to transmit,1: CAN-FD frame to transmit"
bitfld.long 0x00 1. "TMBRS,Bit Rate Switch bit" "0: CAN-FD frame to transmit with no bit rate..,1: CAN-FD frame to transmit with bit rate switch"
newline
bitfld.long 0x00 0. "TMESI,Error State Indicator bit" "0: CAN-FD frame to transmit by error active node,1: CAN-FD frame to transmit by error passive node"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1000C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1080C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1100C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1180C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1200C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1280C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1300C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1380C)++0x03
line.long 0x00 "CFDTMDF0_$1,TX Message Buffer Data Field 0 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10010)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10810)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11010)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11810)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12010)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12810)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13010)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13810)++0x03
line.long 0x00 "CFDTMDF1_$1,TX Message Buffer Data Field 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10014)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10814)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11014)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11814)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12014)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12814)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13014)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13814)++0x03
line.long 0x00 "CFDTMDF2_$1,TX Message Buffer Data Field 2 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10018)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10818)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11018)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11818)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12018)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12818)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13018)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13818)++0x03
line.long 0x00 "CFDTMDF3_$1,TX Message Buffer Data Field 3 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1001C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1081C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1101C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1181C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1201C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1281C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1301C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1381C)++0x03
line.long 0x00 "CFDTMDF4_$1,TX Message Buffer Data Field 4 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10020)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10820)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11020)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11820)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12020)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12820)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13020)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13820)++0x03
line.long 0x00 "CFDTMDF5_$1,TX Message Buffer Data Field 5 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10024)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10824)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11024)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11824)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12024)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12824)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13024)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13824)++0x03
line.long 0x00 "CFDTMDF6_$1,TX Message Buffer Data Field 6 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10028)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10828)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11028)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11828)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12028)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12828)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13028)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13828)++0x03
line.long 0x00 "CFDTMDF7_$1,TX Message Buffer Data Field 7 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1002C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1082C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1102C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1182C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1202C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1282C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1302C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1382C)++0x03
line.long 0x00 "CFDTMDF8_$1,TX Message Buffer Data Field 8 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10030)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10830)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11030)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11830)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12030)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12830)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13030)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13830)++0x03
line.long 0x00 "CFDTMDF9_$1,TX Message Buffer Data Field 9 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10034)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10834)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11034)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11834)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12034)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12834)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13034)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13834)++0x03
line.long 0x00 "CFDTMDF10_$1,TX Message Buffer Data Field 10 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10038)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10838)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11038)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11838)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12038)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12838)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13038)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13838)++0x03
line.long 0x00 "CFDTMDF11_$1,TX Message Buffer Data Field 11 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1003C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1083C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1103C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1183C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1203C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1283C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1303C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x1383C)++0x03
line.long 0x00 "CFDTMDF12_$1,TX Message Buffer Data Field 12 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10040)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10840)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11040)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11840)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12040)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12840)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13040)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13840)++0x03
line.long 0x00 "CFDTMDF13_$1,TX Message Buffer Data Field 13 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10044)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10844)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11044)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11844)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12044)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12844)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13044)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13844)++0x03
line.long 0x00 "CFDTMDF14_$1,TX Message Buffer Data Field 14 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10048)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x10848)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "32" "33" "34" "35" "36" "37" "38" "39" "40" "41" "42" "43" "44" "45" "46" "47" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11048)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "48" "49" "50" "51" "52" "53" "54" "55" "56" "57" "58" "59" "60" "61" "62" "63" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x11848)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "64" "65" "66" "67" "68" "69" "70" "71" "72" "73" "74" "75" "76" "77" "78" "79" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12048)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "80" "81" "82" "83" "84" "85" "86" "87" "88" "89" "90" "91" "92" "93" "94" "95" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x12848)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "96" "97" "98" "99" "100" "101" "102" "103" "104" "105" "106" "107" "108" "109" "110" "111" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13048)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
repeat 16. (strings "112" "113" "114" "115" "116" "117" "118" "119" "120" "121" "122" "123" "124" "125" "126" "127" )(list 0x00 0x80 0x100 0x180 0x200 0x280 0x300 0x380 0x400 0x480 0x500 0x580 0x600 0x680 0x700 0x780 )
group.long ($2+0x13848)++0x03
line.long 0x00 "CFDTMDF15_$1,TX Message Buffer Data Field 15 Register"
hexmask.long.byte 0x00 24.--31. 1. "TMDB_HH,TX Message Buffer Data Byte (4 ? p + 3)"
hexmask.long.byte 0x00 16.--23. 1. "TMDB_HL,TX Message Buffer Data Byte (4 ? p + 2)"
newline
hexmask.long.byte 0x00 8.--15. 1. "TMDB_LH,TX Message Buffer Data Byte (4 ? p + 1)"
hexmask.long.byte 0x00 0.--7. 1. "TMDB_LL,TX Message Buffer Data Byte (4 ? p)"
repeat.end
tree.end
tree "CLMA (Clock Monitor Circuit)"
repeat 4. (list 0. 1. 2. 3.) (list ad:0x81280800 ad:0x81280820 ad:0x81280840 ad:0x81280860)
tree "CLMA$1"
base $2
group.byte 0x00++0x00
line.byte 0x00 "CTL0,CLMA Control Register 0"
bitfld.byte 0x00 0. "CLME,Clock Monitor m Enable (m = 0 to 3)" "0: Disables CLMAm operation,1: Enables CLMAm operation"
group.word 0x08++0x01
line.word 0x00 "CMPL,CLMA Compare Register L"
hexmask.word 0x00 0.--11. 1. "CMPL,Clock Monitor m Compare L (m = 0 to 3)"
group.word 0x0C++0x01
line.word 0x00 "CMPH,CLMA Compare Register H"
hexmask.word 0x00 0.--11. 1. "CMPH,Clock Monitor m Compare H (m = 0 to 3)"
wgroup.byte 0x10++0x00
line.byte 0x00 "PCMD,CLMA Command Register"
rgroup.byte 0x14++0x00
line.byte 0x00 "PROTSR,CLMA Protection Status Register"
bitfld.byte 0x00 0. "PRERR,CLMAm Error (m = 0 to 3)" "0: No protection error occurred,1: A protection error occurred"
tree.end
repeat.end
tree.end
tree "CMT (Compare Match Timer)"
repeat 6. (list 0. 1. 2. 3. 4. 5.) (list ad:0x80040002 ad:0x80040008 ad:0x80040402 ad:0x80040408 ad:0x80040802 ad:0x80040808)
tree "CMT$1"
base $2
group.word 0x00++0x01
line.word 0x00 "CMCR,Compare Match Timer Control Register"
bitfld.word 0x00 6. "CMIE,Compare Match Interrupt Enable" "0: Compare match interrupt (CMTn_CMI) disabled,1: Compare match interrupt (CMTn_CMI) enabled"
bitfld.word 0x00 0.--1. "CKS,Clock Select" "0: PCLKL/8,1: PCLKL/32,2: PCLKL/128,3: PCLKL/512"
group.word 0x02++0x01
line.word 0x00 "CMCNT,Compare Match Timer Counter Register"
group.word 0x04++0x01
line.word 0x00 "CMCOR,Compare Match Timer Constant Register"
tree.end
repeat.end
tree.end
tree "CMTC (Compare Match Timer Control)"
base ad:0x80040000
repeat 3. (strings "0" "2" "4" )(list 0x0 0x400 0x800 )
group.word ($2+0x00)++0x01
line.word 0x00 "CMSTR$1,Compare Match Timer Start Register"
bitfld.word 0x00 1. "STR1,CMT Channel n+1 Count Start" "0: The CMTn+1.CMCNT counter is stopped,1: The CMTn+1.CMCNT counter is started"
bitfld.word 0x00 0. "STR0,CMT Channel n Count Start" "0: The CMTn.CMCNT counter is stopped,1: The CMTn.CMCNT counter is started"
repeat.end
tree.end
tree "CMTW (Compare Match Timer W)"
repeat 2. (list 0. 1.) (list ad:0x80041000 ad:0x80041400)
tree "CMTW$1"
base $2
group.word 0x00++0x01
line.word 0x00 "CMWSTR,Timer Start Register"
bitfld.word 0x00 0. "STR,Counter Start" "0: The CMWCNT counter stops counting,1: The CMWCNT counter starts counting"
group.word 0x04++0x01
line.word 0x00 "CMWCR,Timer Control Register"
bitfld.word 0x00 13.--15. "CCLR,Counter Clear" "0: The CMWCNT counter is cleared by CMWCOR..,1: The CMWCNT counter is not cleared,2: The CMWCNT counter is not cleared,3: The CMWCNT counter is not cleared,4: The CMWCNT counter is cleared by CMWICR0..,5: The CMWCNT counter is cleared by CMWICR1..,6: The CMWCNT counter is cleared by CMWOCR0..,7: The CMWCNT counter is cleared by CMWOCR1.."
bitfld.word 0x00 9. "CMS,Timer Counter Size" "0: 32 bits,1: 16 bits"
newline
bitfld.word 0x00 7. "OC1IE,Output Compare 1 Interrupt Enable" "0: Disables an interrupt request by the output..,1: Enables an interrupt request by the output.."
bitfld.word 0x00 6. "OC0IE,Output Compare 0 Interrupt Enable" "0: Disables an interrupt request by the output..,1: Enables an interrupt request by the output.."
newline
bitfld.word 0x00 5. "IC1IE,Input Capture 1 Interrupt Enable" "0: Disables an interrupt request by the input..,1: Enables an interrupt request by the input.."
bitfld.word 0x00 4. "IC0IE,Input Capture 0 Interrupt Enable" "0: Disables an interrupt request by the input..,1: Enables an interrupt request by the input.."
newline
bitfld.word 0x00 3. "CMWIE,Compare Match Interrupt Enable" "0: Disables a compare match interrupt request..,1: Enables a compare match interrupt request.."
bitfld.word 0x00 0.--1. "CKS,Clock Select" "0: PCLKL/8,1: PCLKL/32,2: PCLKL/128,3: PCLKL/512"
group.word 0x08++0x01
line.word 0x00 "CMWIOR,Timer I/O Control Register"
bitfld.word 0x00 15. "CMWE,Compare Match Enable" "0: Disables the compare match operation using..,1: Enables the compare match operation using the.."
bitfld.word 0x00 13. "OC1E,Compare Match Enable 1" "0: Disables the compare match operation using..,1: Enables the compare match operation using the.."
newline
bitfld.word 0x00 12. "OC0E,Compare Match Enable 0" "0: Disables the compare match operation using..,1: Enables the compare match operation using the.."
bitfld.word 0x00 10.--11. "OC1,Output Compare Control 1" "0: Retains the output value,1: Initially outputs 0 and toggles the output..,2: Initially outputs 1 and toggles the output..,3: Setting prohibited"
newline
bitfld.word 0x00 8.--9. "OC0,Output Compare Control 0" "0: Retains the output value,1: Initially outputs 0 and toggles the output..,2: Initially outputs 1 and toggles the output..,3: Setting prohibited"
bitfld.word 0x00 5. "IC1E,Input Capture Enable 1" "0: Disables the input capture operation of the..,1: Enables the input capture operation of the.."
newline
bitfld.word 0x00 4. "IC0E,Input Capture Enable 0" "0: Disables the input capture operation of the..,1: Enables the input capture operation of the.."
bitfld.word 0x00 2.--3. "IC1,Input Capture Control 1" "0: Input capture at the rising edge on the TIC1..,1: Input capture at the falling edge on the TIC1..,2: Input capture at both edges on the TIC1 pin,3: Setting prohibited"
newline
bitfld.word 0x00 0.--1. "IC0,Input Capture Control 0" "0: Input capture at the rising edge on the TIC0..,1: Input capture at the falling edge on the TIC0..,2: Input capture at both edges on the TIC0 pin,3: Setting prohibited"
group.long 0x10++0x03
line.long 0x00 "CMWCNT,Timer Counter"
group.long 0x14++0x03
line.long 0x00 "CMWCOR,Compare Match Constant Register"
repeat 2. (strings "0" "1" )(list 0x0 0x4 )
rgroup.long ($2+0x18)++0x03
line.long 0x00 "CMWICR$1,Input Capture Registers"
repeat.end
repeat 2. (strings "0" "1" )(list 0x0 0x4 )
group.long ($2+0x20)++0x03
line.long 0x00 "CMWOCR$1,Output Compare Registers"
repeat.end
tree.end
repeat.end
tree.end
tree "CRC (CRC Unit)"
repeat 2. (list 0. 1.) (list ad:0x80004000 ad:0x81003000)
tree "CRC$1"
base $2
group.byte 0x00++0x00
line.byte 0x00 "CRCCR0,CRC Control Register 0"
bitfld.byte 0x00 7. "DORCLR,CRCDOR Register Clear" "0: No effect,1: Clears the CRCDOR register"
bitfld.byte 0x00 6. "LMS,CRC Calculation Switching" "0: Generates CRC for LSB first communication,1: Generates CRC for MSB first communication"
newline
bitfld.byte 0x00 0.--2. "GPS,CRC Generating Polynomial Switching" "0: No calculation is executed,1: 8-bit CRC-8 (X8 + X2 + X + 1),2: 16-bit CRC-16 (X16 + X15 + X2 + 1),3: 16-bit CRC-CCITT (X16 + X12 + X5 + 1),4: 32-bit CRC-32 (X32 + X26 + X23 + X22 + X16 +..,5: 32-bit CRC-32C (X32 + X28 + X27 + X26 + X25 +..,?..."
group.long 0x04++0x03
line.long 0x00 "CRCDIR,CRC Data Input Register"
group.byte 0x04++0x00
line.byte 0x00 "CRCDIR_BY,CRC Data Input Register"
group.long 0x08++0x03
line.long 0x00 "CRCDOR,CRC Data Output Register"
group.word 0x08++0x01
line.word 0x00 "CRCDOR_HA,CRC Data Output Register"
group.byte 0x08++0x00
line.byte 0x00 "CRCDOR_BY,CRC Data Output Register"
tree.end
repeat.end
tree.end
tree "DMA (DMAC Configuration)"
base ad:0x80090060
repeat 5. (strings "0" "1" "2" "3" "4" )(list 0x0 0x4 0x8 0xC 0x10 )
group.long ($2+0x0C)++0x03
line.long 0x00 "DMAC0_RSSEL$1,DMAC Unit 0 Resource Select Register"
hexmask.long.word 0x00 20.--28. 1. "REQ_SELC,DMA Resource Select for Channel n + 2"
hexmask.long.word 0x00 10.--18. 1. "REQ_SELB,DMA Resource Select for Channel n + 1"
hexmask.long.word 0x00 0.--8. 1. "REQ_SELA,DMA Resource Select for Channel n"
repeat.end
group.long 0x20++0x03
line.long 0x00 "DMAC0_RSSEL5,DMAC Unit 0 Resource Select Register 5"
hexmask.long.word 0x00 0.--8. 1. "REQ_SELA,DMA Resource Select for Channel n"
repeat 5. (strings "0" "1" "2" "3" "4" )(list 0x0 0x4 0x8 0xC 0x10 )
group.long ($2+0x24)++0x03
line.long 0x00 "DMAC1_RSSEL$1,DMAC Unit 1 Resource Select Register"
hexmask.long.word 0x00 20.--28. 1. "REQ_SELC,DMA Resource Select for Channel n + 2"
hexmask.long.word 0x00 10.--18. 1. "REQ_SELB,DMA Resource Select for Channel n + 1"
hexmask.long.word 0x00 0.--8. 1. "REQ_SELA,DMA Resource Select for Channel n"
repeat.end
group.long 0x38++0x03
line.long 0x00 "DMAC1_RSSEL5,DMAC Unit 1 Resource Select Register 5"
hexmask.long.word 0x00 0.--8. 1. "REQ_SELA,DMA Resource Select for Channel n"
tree.end
tree "DMAC (DMA Controller)"
repeat 2. (list 0. 1.) (list ad:0x80080000 ad:0x80081000)
tree "DMAC$1"
base $2
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x00)++0x03
line.long 0x00 "N0SA_$1,Next0 Source Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x04)++0x03
line.long 0x00 "N0DA_$1,Next0 Destination Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x08)++0x03
line.long 0x00 "N0TB_$1,Next0 Transaction Byte Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x0C)++0x03
line.long 0x00 "N1SA_$1,Next1 Source Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x10)++0x03
line.long 0x00 "N1DA_$1,Next1 Destination Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x14)++0x03
line.long 0x00 "N1TB_$1,Next1 Transaction Byte Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
rgroup.long ($2+0x18)++0x03
line.long 0x00 "CRSA_$1,Current Source Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
rgroup.long ($2+0x1C)++0x03
line.long 0x00 "CRDA_$1,Current Destination Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
rgroup.long ($2+0x20)++0x03
line.long 0x00 "CRTB_$1,Current Transaction Byte Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
rgroup.long ($2+0x24)++0x03
line.long 0x00 "CHSTAT_$1,Channel Status Register"
bitfld.long 0x00 16. "INTM,DMA Transfer Completion Interrupt Request Mask" "0: The temporary mask status is cleared,1: Temporary mask status"
bitfld.long 0x00 11. "MODE,DMA Mode" "0: Register mode,1: Link mode"
newline
bitfld.long 0x00 10. "DER,Descriptor Error" "0: No descriptor error occurred,1: Descriptor error occurred"
bitfld.long 0x00 9. "DW,Descriptor Write Back" "0: Header is not written back in link mode,1: The ER bit in the CHSTAT_n register = 0.."
newline
bitfld.long 0x00 8. "DL,Descriptor Load" "0: The descriptor is not being,1: When ER = 0 The descriptor is being read in.."
bitfld.long 0x00 7. "SR,Next Register Select" "0: Next0 register set,1: Next1 register set"
newline
bitfld.long 0x00 6. "TC,DMA Transfer Completion (total number of data bytes for transaction)" "0: DMA transfer not completed,1: DMA transfer completed"
bitfld.long 0x00 5. "END,DMA Transfer Completion Interrupt" "0: DMA transfer not completed,1: DMA transfer completed"
newline
bitfld.long 0x00 4. "ER,DMA Error" "0: No bus error occurred,1: A bus error occurred"
bitfld.long 0x00 3. "SUS,Suspend" "0: Channel_n not suspended,1: Channel_n suspended"
newline
bitfld.long 0x00 2. "TACT,DMAC Operating Status" "0: DMA in Channel_n stops,1: DMA in Channel_n is running"
bitfld.long 0x00 1. "RQST,DMA Transfer Request" "0: DMA transfer request not accepted,1: DMA transfer request accepted"
newline
bitfld.long 0x00 0. "EN,DMA Activation Enable" "0: Operation disabled,1: Operation enabled"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x28)++0x03
line.long 0x00 "CHCTRL_$1,Channel Control Register"
bitfld.long 0x00 17. "CLRINTM,DMA Transfer Completion Interrupt Request Mask Clear" "0: Operation is not affected,1: Clear the mask state set with the SETINTM bit"
bitfld.long 0x00 16. "SETINTM,DMA Transfer Completion Interrupt Request Mask" "0: Operation is not affected,1: Mask a DMA transfer completion interrupt.."
newline
bitfld.long 0x00 9. "CLRSUS,Suspend Clear" "0: Operation is not affected,1: Clear the temporary suspend status of the.."
bitfld.long 0x00 8. "SETSUS,Suspend Request" "0: Operation is not affected,1: Suspends the current DMA transfer"
newline
bitfld.long 0x00 6. "CLRTC,TC Clear" "0: Operation is not affected,1: Clear the TC bit in the CHSTAT_n register"
bitfld.long 0x00 5. "CLREND,END Clear" "0: Operation is not affected,1: Clear the END bit"
newline
bitfld.long 0x00 4. "CLRRQ,DMA Transfer Request Clear" "0: Operation is not affected,1: Clear the RQST bit in the CHSTAT_n register"
bitfld.long 0x00 3. "SWRST,Software Reset" "0: Operation is not affected,1: Clear each bit in the CHSTAT_n register"
newline
bitfld.long 0x00 2. "STG,Software Trigger" "0: Operation is not affected,1: A transfer request is set by software (the.."
bitfld.long 0x00 1. "CLREN,DMA Activation Enable Clear" "0: Operation is not affected,1: DMA transfer is disabled (the EN bit in the.."
newline
bitfld.long 0x00 0. "SETEN,DMA Activation Enable" "0: Operation is not affected,1: DMA transfer is enabled (the EN bit in the.."
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x2C)++0x03
line.long 0x00 "CHCFG_$1,Channel Configuration Register"
bitfld.long 0x00 31. "DMS,DMA Mode Select" "0: Register mode (a value after reset),1: Link mode"
bitfld.long 0x00 30. "REN,Register Set Enable" "0: Does not perform DMA transfer accordingly,1: Performs DMA transfer accordingly"
newline
bitfld.long 0x00 29. "RSW,RSEL Reverse" "0: Does not reverse the RSEL bit when DMA..,1: Reverse the RSEL bit when DMA transfer.."
bitfld.long 0x00 28. "RSEL,Next Register Select" "0: Execute Next0 Register Set (a value after..,1: Execute Next1 Register Set"
newline
bitfld.long 0x00 27. "SBE,Buffer Flush Enable" "0: Stop transfer without flushing data in the..,1: Stop transfer after flushing data in the buffer"
bitfld.long 0x00 25. "TCM,TEND Mask" "0: Does not mask (a value after reset),1: Mask"
newline
bitfld.long 0x00 24. "DEM,DMA Transfer Completion Interrupt Mask" "0: Does not mask (a value after reset),1: Mask"
bitfld.long 0x00 22. "TM,Transfer Mode" "0: Single transfer mode (a value after reset),1: Block transfer mode"
newline
bitfld.long 0x00 21. "DAD,Destination Address Count Direction" "0: Increment (a value after reset),1: Fixed"
bitfld.long 0x00 20. "SAD,Source Address Count Direction" "0: Increment (a value after reset),1: Fixed"
newline
bitfld.long 0x00 16.--19. "DDS,Destination Data Size" "0: 8 bits (a value after reset),1: 16 bits,2: 32 bits,3: 64 bits,4: 128 bits,5: 256 bits,6: 512 bits (can be set only for DMAC0),?..."
bitfld.long 0x00 12.--15. "SDS,Source Data Size" "0: 8 bits (a value after reset),1: 16 bits,2: 32 bits,3: 64 bits,4: 128 bits,5: 256 bits,6: 512 bits (can be set only for DMAC0),?..."
newline
bitfld.long 0x00 8.--10. "AM,ACK Mode" "0: Setting is prohibited (a value after reset),1: Level mode (active until DMA transfer request..,2: Bus cycle mode (active between DMA transfer..,3: Bus cycle mode (active between DMA transfer..,4: Mask DACK output,5: Mask DACK output,6: Mask DACK output,7: Mask DACK output"
bitfld.long 0x00 6. "LVL,Level Detection Enable" "0: Detects the edge (a value after reset),1: Detects the level"
newline
bitfld.long 0x00 5. "HIEN,H Detection Enable" "0,1"
bitfld.long 0x00 4. "LOEN,L Detection Enable" "0,1"
newline
bitfld.long 0x00 3. "REQD,DMA Activation Request Source Select" "0: Requested by a transfer source module,1: Requested by a transfer destination module"
bitfld.long 0x00 0.--2. "SEL,Pin Select" "0: Channel 0,1: Channel 1,2: Channel 2,3: Channel 3,4: Channel 4,5: Channel 5,6: Channel 6,7: Channel 7"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x30)++0x03
line.long 0x00 "CHITVL_$1,Channel Interval Register"
hexmask.long.word 0x00 0.--15. 1. "ITVL,Interval"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x34)++0x03
line.long 0x00 "CHEXT_$1,Channel Extension Register"
bitfld.long 0x00 12.--15. "DCA,Destination CACHE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--10. "DPR,Destination PROT" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--7. "SCA,Source CACHE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "SPR,Source PROT" "0,1,2,3,4,5,6,7"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
group.long ($2+0x38)++0x03
line.long 0x00 "NXLA_$1,Next Link Address Register"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x40 0x80 0xC0 0x100 0x140 0x180 0x1C0 )
rgroup.long ($2+0x3C)++0x03
line.long 0x00 "CRLA_$1,Current Link Address Register"
repeat.end
group.long 0x300++0x03
line.long 0x00 "DCTRL_A,DMA Control Register A"
bitfld.long 0x00 0. "PR,Priority Control Select" "0: Fixed priority mode,1: Round-robin mode"
rgroup.long 0x310++0x03
line.long 0x00 "DSTAT_EN_A,DMA Status EN Register A"
bitfld.long 0x00 7. "EN07,Channel 7 EN" "0,1"
bitfld.long 0x00 6. "EN06,Channel 6 EN" "0,1"
newline
bitfld.long 0x00 5. "EN05,Channel 5 EN" "0,1"
bitfld.long 0x00 4. "EN04,Channel 4 EN" "0,1"
newline
bitfld.long 0x00 3. "EN03,Channel 3 EN" "0,1"
bitfld.long 0x00 2. "EN02,Channel 2 EN" "0,1"
newline
bitfld.long 0x00 1. "EN01,Channel 1 EN" "0,1"
bitfld.long 0x00 0. "EN00,Channel 0 EN" "0,1"
rgroup.long 0x314++0x03
line.long 0x00 "DSTAT_ER_A,DMA Status ER Register A"
bitfld.long 0x00 7. "ER07,Channel 7 ER" "0,1"
bitfld.long 0x00 6. "ER06,Channel 6 ER" "0,1"
newline
bitfld.long 0x00 5. "ER05,Channel 5 ER" "0,1"
bitfld.long 0x00 4. "ER04,Channel 4 ER" "0,1"
newline
bitfld.long 0x00 3. "ER03,Channel 3 ER" "0,1"
bitfld.long 0x00 2. "ER02,Channel 2 ER" "0,1"
newline
bitfld.long 0x00 1. "ER01,Channel 1 ER" "0,1"
bitfld.long 0x00 0. "ER00,Channel 0 ER" "0,1"
rgroup.long 0x318++0x03
line.long 0x00 "DSTAT_END_A,DMA Status END Register A"
bitfld.long 0x00 7. "END07,Channel 7 END" "0,1"
bitfld.long 0x00 6. "END06,Channel 6 END" "0,1"
newline
bitfld.long 0x00 5. "END05,Channel 5 END" "0,1"
bitfld.long 0x00 4. "END04,Channel 4 END" "0,1"
newline
bitfld.long 0x00 3. "END03,Channel 3 END" "0,1"
bitfld.long 0x00 2. "END02,Channel 2 END" "0,1"
newline
bitfld.long 0x00 1. "END01,Channel 1 END" "0,1"
bitfld.long 0x00 0. "END00,Channel 0 END" "0,1"
rgroup.long 0x320++0x03
line.long 0x00 "DSTAT_SUS_A,DMA Status SUS Register A"
bitfld.long 0x00 7. "SUS07,Channel 7 SUS" "0,1"
bitfld.long 0x00 6. "SUS06,Channel 6 SUS" "0,1"
newline
bitfld.long 0x00 5. "SUS05,Channel 5 SUS" "0,1"
bitfld.long 0x00 4. "SUS04,Channel 4 SUS" "0,1"
newline
bitfld.long 0x00 3. "SUS03,Channel 3 SUS" "0,1"
bitfld.long 0x00 2. "SUS02,Channel 2 SUS" "0,1"
newline
bitfld.long 0x00 1. "SUS01,Channel 1 SUS" "0,1"
bitfld.long 0x00 0. "SUS00,Channel 0 SUS" "0,1"
tree.end
repeat.end
tree.end
tree "DOC (Data Operation Circuit)"
base ad:0x80044000
group.byte 0x00++0x00
line.byte 0x00 "DOCR,DOC Control Register"
bitfld.byte 0x00 6. "DOPCFCL,DOPCF Flag Clear" "0: No effect,1: Clear the DOPCF flag"
rbitfld.byte 0x00 5. "DOPCF,Data Operation Circuit Flag" "0,1"
bitfld.byte 0x00 4. "DOPCIE,Data Operation Circuit Interrupt Enable" "0: Disables interrupts from the data operation..,1: Enables interrupts from the data operation.."
newline
bitfld.byte 0x00 2. "DCSEL,Detection Condition Select" "0: Data mismatch is detected,1: Data match is detected"
bitfld.byte 0x00 0.--1. "OMS,Operating Mode Select" "0: Data comparison mode,1: Data addition mode,2: Data subtraction mode,3: Setting prohibited"
group.word 0x02++0x01
line.word 0x00 "DODIR,DOC Data Input Register"
group.word 0x04++0x01
line.word 0x00 "DODSR,DOC Data Setting Register"
tree.end
tree "DSMIF (Delta-Sigma Interface)"
repeat 2. (list 0. 1.) (list ad:0x90008000 ad:0x90008400)
tree "DSMIF$1"
base $2
group.long 0x40++0x03
line.long 0x00 "DSSEICR,Overcurrent Sum Error Detect Interrupt Control Register"
bitfld.long 0x00 1. "ISEH,Overcurrent sum error upper limit detection interrupt enable bit" "0: Do not output overcurrent sum error upper..,1: Overcurrent sum error lower upper detection.."
bitfld.long 0x00 0. "ISEL,Overcurrent sum error lower limit detection interrupt enable bit" "0: Do not output overcurrent sum error lower..,1: Overcurrent sum error lower limit detection.."
group.long 0x44++0x03
line.long 0x00 "DSSECSR,Overcurrent Sum Error Detect Channel Setting Register"
bitfld.long 0x00 0.--2. "SEDM,Overcurrent sum error detect mode setting bit" "0: Detects error of sum value of overcurrent..,1: Detects error of sum value of overcurrent..,2: Detects error of overcurrent data of CH0,3: Detects error of overcurrent data of CH1,4: Detects error of overcurrent data of CH2,?..."
group.long 0x48++0x03
line.long 0x00 "DSSELTR,Overcurrent Sum Error Detect Low Threshold Register"
hexmask.long.tbyte 0x00 0.--17. 1. "SCMPTBL,Overcurrent sum error detect lower limit"
group.long 0x4C++0x03
line.long 0x00 "DSSEHTR,Overcurrent Sum Error Detect High Threshold Register"
hexmask.long.tbyte 0x00 0.--17. 1. "SCMPTBH,Overcurrent sum error detect upper limit"
group.long 0x50++0x03
line.long 0x00 "DSSECR,Overcurrent Sum Error Detect Control Register"
bitfld.long 0x00 1. "SEEH,Overcurrent sum error upper limit detection enable bit" "0: The upper limit exceeded detection function..,1: The upper limit exceeded detection function.."
bitfld.long 0x00 0. "SEEL,Overcurrent sum error lower limit detection enable bit" "0: The lower limit exceeded detection function..,1: The lower limit exceeded detection function.."
repeat 3. (strings "0" "1" "2" )(list 0x0 0x4 0x8 )
group.long ($2+0x60)++0x03
line.long 0x00 "DSSECDR$1,Overcurrent Sum Error Detect Capture Data Register"
hexmask.long.word 0x00 0.--15. 1. "SECDR,Overcurrent sum error detect capture data n"
repeat.end
group.long 0x100++0x03
line.long 0x00 "DSCSTRTR,Channel Software Start Trigger Register"
bitfld.long 0x00 2. "STRTRG2,Channel 2 start trigger" "0: Do nothing,1: Start channel"
bitfld.long 0x00 1. "STRTRG1,Channel 1 start trigger" "0: Do nothing,1: Start channel"
newline
bitfld.long 0x00 0. "STRTRG0,Channel 0 start trigger" "0: Do nothing,1: Start channel"
group.long 0x104++0x03
line.long 0x00 "DSCSTPTR,Channel Software Stop Trigger Register"
bitfld.long 0x00 2. "STPTRG2,Channel 2 stop trigger" "0: Do nothing,1: Stop channel"
bitfld.long 0x00 1. "STPTRG1,Channel 1 stop trigger" "0: Do nothing,1: Stop channel"
newline
bitfld.long 0x00 0. "STPTRG0,Channel 0 stop trigger" "0: Do nothing,1: Stop channel"
rgroup.long 0x110++0x03
line.long 0x00 "DSCESR,Channel Error Status Register"
bitfld.long 0x00 17. "SUMERRH,Overcurrent sum error upper limit detection flag" "0: Indicates that the sum value of overcurrent..,1: Indicates that the sum value of overcurrent.."
bitfld.long 0x00 16. "SUMERRL,Overcurrent sum error lower limit detection flag" "0: Indicates that the sum value of overcurrent..,1: Indicates that the sum value of overcurrent.."
newline
bitfld.long 0x00 10. "SCF2,Channel 2 short circuit detection flag" "0: Indicates that the MDAT2 pin short circuit is..,1: Indicates that a short circuit on the MDAT2.."
bitfld.long 0x00 9. "SCF1,Channel 1 short circuit detection flag" "0: Indicates that the MDAT1 pin short circuit is..,1: Indicates that a short circuit on the MDAT1.."
newline
bitfld.long 0x00 8. "SCF0,Channel 0 short circuit detection flag" "0: Indicates that the MDAT0 pin short circuit is..,1: Indicates that a short circuit on the MDAT0.."
bitfld.long 0x00 6. "OCFH2,Channel 2 overcurrent upper limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data is more.."
newline
bitfld.long 0x00 5. "OCFH1,Channel 1 overcurrent upper limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data is more.."
bitfld.long 0x00 4. "OCFH0,Channel 0 overcurrent upper limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data is more.."
newline
bitfld.long 0x00 2. "OCFL2,Channel 2 overcurrent lower limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data is less.."
bitfld.long 0x00 1. "OCFL1,Channel 1 overcurrent lower limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data is less.."
newline
bitfld.long 0x00 0. "OCFL0,Channel 0 overcurrent lower limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data is less.."
rgroup.long 0x118++0x03
line.long 0x00 "DSCSR,Channel Status Register"
bitfld.long 0x00 2. "DUF2,Channel 2 Data Update flag" "0: Indicates that the Current Data register has..,1: Indicates that the Current Data register has.."
bitfld.long 0x00 1. "DUF1,Channel 1 Data Update flag" "0: Indicates that the Current Data register has..,1: Indicates that the Current Data register has.."
newline
bitfld.long 0x00 0. "DUF0,Channel 0 Data Update flag" "0: Indicates that the Current Data register has..,1: Indicates that the Current Data register has.."
rgroup.long 0x11C++0x03
line.long 0x00 "DSCSSR,Channel State Status Register"
bitfld.long 0x00 8. "CHSTATE2,Channel 2 state" "0: Channel stop,1: Channel in operation"
bitfld.long 0x00 4. "CHSTATE1,Channel 1 state" "0: Channel stop,1: Channel in operation"
newline
bitfld.long 0x00 0. "CHSTATE0,Channel 0 state" "0: Channel stop,1: Channel in operation"
wgroup.long 0x120++0x03
line.long 0x00 "DSCESCR,Channel Error Status Clear Register"
bitfld.long 0x00 17. "CLRSUMERRH,Overcurrent Sum Error Upper Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.SUMERRH"
bitfld.long 0x00 16. "CLRSUMERRL,Overcurrent Sum Error Lower Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.SUMERRL"
newline
bitfld.long 0x00 10. "CLRSCF2,Channel 2 Short Circuit Detection Flag Clear" "0: No effect,1: Clear DSCESR.SCF2 / DSCSRCH2.SCF"
bitfld.long 0x00 9. "CLRSCF1,Channel 1 Short Circuit Detection Flag Clear" "0: No effect,1: Clear DSCESR.SCF1 / DSCSRCH1.SCF"
newline
bitfld.long 0x00 8. "CLRSCF0,Channel 0 Short Circuit Detection Flag Clear" "0: No effect,1: Clear DSCESR.SCF0 / DSCSRCH0.SCF"
bitfld.long 0x00 6. "CLROCFH2,Channel 2 Overcurrent Upper Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.OCFH2 / DSCSRCH2.OCFH"
newline
bitfld.long 0x00 5. "CLROCFH1,Channel 1 Overcurrent Upper Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.OCFH1 / DSCSRCH1.OCFH"
bitfld.long 0x00 4. "CLROCFH0,Channel 0 Overcurrent Upper Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.OCFH0 / DSCSRCH0.OCFH"
newline
bitfld.long 0x00 2. "CLROCFL2,Channel 2 Overcurrent Lower Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.OCFL2 / DSCSRCH2.OCFL"
bitfld.long 0x00 1. "CLROCFL1,Channel 1 Overcurrent Lower Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.OCFL1 / DSCSRCH1.OCFL"
newline
bitfld.long 0x00 0. "CLROCFL0,Channel 0 Overcurrent Lower Limit Detection Flag Clear" "0: No effect,1: Clear DSCESR.OCFL0 / DSCSRCH0.OCFL"
wgroup.long 0x128++0x03
line.long 0x00 "DSCSCR,Channel Status Clear Register"
bitfld.long 0x00 2. "CLRDUF2,Channel 2 Data Update Flag Clear" "0: No effect,1: Clear DSCSR.DUF2 / DSCSRCH2.DUF"
bitfld.long 0x00 1. "CLRDUF1,Channel 1 Data Update Flag Clear" "0: No effect,1: Clear DSCSR.DUF1 / DSCSRCH1.DUF"
newline
bitfld.long 0x00 0. "CLRDUF0,Channel 0 Data Update Flag Clear" "0: No effect,1: Clear DSCSR.DUF0 / DSCSRCH0.DUF"
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x180)++0x03
line.long 0x00 "DSICRCH$1,Interrupt Control Register Channel"
bitfld.long 0x00 3. "IUE,Current data register update interrupt enable" "0: Do not output current data register update..,1: Current data register update interrupt can be.."
bitfld.long 0x00 2. "ISE,Short circuit detection error interrupt enable" "0: Do not output short circuit detection interrupt,1: Short circuit detection interrupt can be output"
newline
bitfld.long 0x00 1. "IOEH,Overcurrent upper limit exceeded output interrupt enable" "0: Do not output overcurrent upper limit..,1: Overcurrent upper limit exceeded detection.."
bitfld.long 0x00 0. "IOEL,Overcurrent lower limit detection interrupt enable" "0: Do not output overcurrent lower limit..,1: Overcurrent lower limit detection interrupt.."
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x184)++0x03
line.long 0x00 "DSCMCCRCH$1,Current Measurement Clock Control Register Channel"
bitfld.long 0x00 8.--13. "CKDIV,A/D conversion clock division ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 7. "SEDGE,Sampling edge selection" "0: Capture MDATn at the negative edge of MCLKn,1: Capture MDATn at the positive edge of MCLKn"
newline
bitfld.long 0x00 0. "CKDIR,A/D conversion clock master/slave switching" "0: MCLKn pin is input (slave operation),1: MCLKn pin is output (master operation)"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x188)++0x03
line.long 0x00 "DSCMFCRCH$1,Current Measurement Filter Control Register Channel"
bitfld.long 0x00 16.--20. "CMSH,Data shift setting for current measurement" "0: [23:8],1: [22:7],2: [21:6],3: [20:5],4: [19:4],5: [18:3],6: [17:2],7: [16:1],8: [15:0],9: [14:0]<<1,10: [13:0]<<2,11: [12:0]<<3,12: [11:0]<<4,13: [10:0]<<5,14: [9:0]<<6,15: [8:0]<<7,16: [7:0]<<8,17: [6:0]<<9,18: [5:0]<<10,19: [4:0]<<11,?..."
hexmask.long.byte 0x00 8.--15. 1. "CMDEC,Decimation ratio selection for current measurement"
newline
bitfld.long 0x00 0.--1. "CMSINC,Current measurement filter order setting" "0: Sinc3 (3rd order),1: Sinc1 (1st order),2: Sinc2 (2nd order),3: Setting prohibited"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x18C)++0x03
line.long 0x00 "DSCMCTCRCH$1,Current Measurement Capture Trigger Control Register Channel"
bitfld.long 0x00 23. "DEDGE,Current measurement filter initialization trigger for division counter for decimation edge selection bit" "0: The frequency division counter for decimation..,1: The frequency division counter for decimation.."
bitfld.long 0x00 16.--17. "DITSEL,Current measurement filter initialization trigger selection bit for frequency division counter for decimation" "0: Do not initialize,1: Select decimation dividing counter..,2: Select decimation dividing counter..,3: Select decimation dividing counter.."
newline
bitfld.long 0x00 8.--10. "CTSELB,Current capture trigger B selection bit" "0: Do not capture,1: Select current data capture trigger 0,2: Select current data capture trigger 1,3: Select current data capture trigger 2,4: Select current data capture trigger 3,5: Select current data capture trigger 4,6: Select current data capture trigger 5,7: Setting prohibited (do not capture)"
bitfld.long 0x00 0.--2. "CTSELA,Current capture trigger A selection bit" "0: Do not capture,1: Select current data capture trigger 0,2: Select current data capture trigger 1,3: Select current data capture trigger 2,4: Select current data capture trigger 3,5: Select current data capture trigger 4,6: Select current data capture trigger 5,7: Setting prohibited (do not capture)"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x190)++0x03
line.long 0x00 "DSEDCRCH$1,Error Detect Control Register Channel"
bitfld.long 0x00 0. "SDE,Short circuit detection enable bit" "0: Short circuit detection is invalid,1: Short circuit detection is valid"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x194)++0x03
line.long 0x00 "DSOCFCRCH$1,Overcurrent Detect Filter Control Register Channel"
bitfld.long 0x00 16.--20. "OCSH,Data shift setting for overcurrent detection" "0: [23:8],1: [22:7],2: [21:6],3: [20:5],4: [19:4],5: [18:3],6: [17:2],7: [16:1],8: [15:0],9: [14:0]<<1,10: [13:0]<<2,11: [12:0]<<3,12: [11:0]<<4,13: [10:0]<<5,14: [9:0]<<6,15: [8:0]<<7,16: [7:0]<<8,17: [6:0]<<9,18: [5:0]<<10,19: [4:0]<<11,?..."
hexmask.long.byte 0x00 8.--15. 1. "OCDEC,Decimation ratio selection for overcurrent detection"
newline
bitfld.long 0x00 0.--1. "OCSINC,Overcurrent detection filter order setting" "0: Sinc3 (3rd order),1: Sinc1 (1st order),2: Sinc2 (2nd order),3: Setting prohibited"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x198)++0x03
line.long 0x00 "DSOCLTRCH$1,Overcurrent Low Threshold Register Channel"
hexmask.long.word 0x00 0.--15. 1. "OCMPTBL,Overcurrent detection lower limit"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x19C)++0x03
line.long 0x00 "DSOCHTRCH$1,Overcurrent High Threshold Register Channel"
hexmask.long.word 0x00 0.--15. 1. "OCMPTBH,Overcurrent detection upper limit"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x1A0)++0x03
line.long 0x00 "DSSCTSRCH$1,Short Circuit Threshold Setting Register Channel"
hexmask.long.word 0x00 16.--28. 1. "SCNTH,Short circuit detection high continuous detection count"
hexmask.long.word 0x00 0.--12. 1. "SCNTL,Short circuit detection low continuous detection count"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x1A4)++0x03
line.long 0x00 "DSODCRCH$1,Overcurrent Detect Control Register Channel"
bitfld.long 0x00 1. "ODEH,Overcurrent upper limit exceeded detection enable bit" "0: Overcurrent upper limit exceeded detection is..,1: Overcurrent upper limit exceeded detection is.."
bitfld.long 0x00 0. "ODEL,Overcurrent lower limit detection enable bit" "0: Overcurrent lower limit detection is invalid,1: Overcurrent lower limit detection is valid"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x1C0)++0x03
line.long 0x00 "DSCSTRTRCH$1,Software Start Trigger Register Channel"
bitfld.long 0x00 0. "STRTRG,Channel start trigger" "0: Do nothing,1: Start channel n"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x1C4)++0x03
line.long 0x00 "DSCSTPTRCH$1,Software Stop Trigger Register Channel"
bitfld.long 0x00 0. "STPTRG,Channel stop trigger" "0: Do nothing,1: Stop channel n"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
rgroup.long ($2+0x1D0)++0x03
line.long 0x00 "DSCDRCH$1,Current Data Register Channel"
hexmask.long.word 0x00 0.--15. 1. "ADDR,Current data"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
rgroup.long ($2+0x1D4)++0x03
line.long 0x00 "DSCCDRACH$1,Capture Current Data Register A Channel"
hexmask.long.word 0x00 0.--15. 1. "CDRA,Capture current data A"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
rgroup.long ($2+0x1D8)++0x03
line.long 0x00 "DSCCDRBCH$1,Capture Current Data Register B Channel"
hexmask.long.word 0x00 0.--15. 1. "CDRB,Capture current data B"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
rgroup.long ($2+0x1DC)++0x03
line.long 0x00 "DSOCDRCH$1,Overcurrent Data Register Channel"
hexmask.long.word 0x00 0.--15. 1. "ODR,Overcurrent data"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
rgroup.long ($2+0x1E0)++0x03
line.long 0x00 "DSCOCDRCH$1,Capture Overcurrent Data Register Channel"
hexmask.long.word 0x00 0.--15. 1. "CODR,Capture Overcurrent data when overcurrent detected"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
rgroup.long ($2+0x200)++0x03
line.long 0x00 "DSCSRCH$1,Status Register Channel"
bitfld.long 0x00 16. "CHSTATE,Channel n state" "0: Channel stop,1: Channel in operation"
bitfld.long 0x00 3. "SCF,Channel n short circuit detection flag" "0: Indicates that the MDATn pin short circuit is..,1: Indicates that a short circuit on the MDATn.."
newline
bitfld.long 0x00 2. "OCFH,Channel n overcurrent upper limit exceeded flag" "0: Indicates that the overcurrent data does not..,1: Indicates that the overcurrent data has.."
bitfld.long 0x00 1. "OCFL,Channel n overcurrent lower limit detection flag" "0: Indicates that the overcurrent data is not..,1: Indicates that the overcurrent data has.."
newline
bitfld.long 0x00 0. "DUF,Channel n data update flag" "0: Indicates that the current data register has..,1: Indicates that the current data register has.."
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x90 0x120 )
group.long ($2+0x204)++0x03
line.long 0x00 "DSCSCRCH$1,Status Clear Register Channel"
bitfld.long 0x00 3. "CLRSCF,Channel n short circuit detection flag clear" "0: Do nothing,1: Clear DSCESR.SCFn / DSCSRCHn.SCF"
bitfld.long 0x00 2. "CLROCFH,Channel n overcurrent upper limit exceeded flag clear" "0: Do nothing,1: Clear DSCESR.OCFHn / DSCSRCHn.OCFH"
newline
bitfld.long 0x00 1. "CLROCFL,Channel n overcurrent lower limit detection flag clear" "0: Do nothing,1: Clear DSCESR.OCFLn / DSCSRCHn.OCFL"
bitfld.long 0x00 0. "CLRDUF,Channel n data update flag clear" "0: Do nothing,1: Clear DSCSR.DUFn / DSCSRCHn.DUF"
repeat.end
tree.end
repeat.end
tree.end
tree "ELC (Evnet Link Controller)"
base ad:0x80090010
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x00)++0x03
line.long 0x00 "ELC_SSEL$1,ELC Event Source Select Register"
hexmask.long.word 0x00 20.--29. 1. "ELC_SEL2,Set the number for ELC event source to be linked to the ELC destination"
hexmask.long.word 0x00 10.--19. 1. "ELC_SEL1,Set the number for ELC event source to be linked to the ELC destination"
hexmask.long.word 0x00 0.--9. 1. "ELC_SEL0,Set the number for ELC event source to be linked to the ELC destination"
repeat.end
repeat 3. (strings "16" "17" "18" )(list 0x0 0x4 0x8 )
group.long ($2+0x40)++0x03
line.long 0x00 "ELC_SSEL$1,ELC Event Source Select Register"
hexmask.long.word 0x00 20.--29. 1. "ELC_SEL2,Set the number for ELC event source to be linked to the ELC destination"
hexmask.long.word 0x00 10.--19. 1. "ELC_SEL1,Set the number for ELC event source to be linked to the ELC destination"
hexmask.long.word 0x00 0.--9. 1. "ELC_SEL0,Set the number for ELC event source to be linked to the ELC destination"
repeat.end
tree.end
tree "ELO (Evnet Link Option Setting)"
base ad:0x80281200
group.long 0x00++0x03
line.long 0x00 "ELOPA,Event Link Option Setting Register A"
bitfld.long 0x00 6.--7. "MTU3MD,MTU3 Operation Select" "0: Counting is started,1: Counting is restarted,2: Input capture (The MTU3.TCNT value is..,3: Event is disabled"
bitfld.long 0x00 0.--1. "MTU0MD,MTU0 Operation Select" "0: Counting is started,1: Counting is restarted,2: Input capture (The MTU0.TCNT value is..,3: Event is disabled"
group.long 0x04++0x03
line.long 0x00 "ELOPB,Event Link Option Setting Register B"
bitfld.long 0x00 0.--1. "MTU4MD,MTU4 Operation Select" "0: Counting is started,1: Counting is restarted,2: Input capture (The MTU4.TCNT value is..,3: Event is disabled"
tree.end
tree "ESC (EtherCAT Slave Controller)"
base ad:0x80130000
rgroup.byte 0x00++0x00
line.byte 0x00 "TYPE,Type Register"
hexmask.byte 0x00 0.--7. 1. "TYPE,Type of the EtherCAT slave controller"
rgroup.byte 0x01++0x00
line.byte 0x00 "REVISION,Revision Register"
hexmask.byte 0x00 0.--7. 1. "REV,Revision of the EtherCAT slave controller"
rgroup.byte 0x02++0x00
line.byte 0x00 "BUILD,Build Register"
hexmask.byte 0x00 0.--7. 1. "BUILD,Build number of the EtherCAT slave controller"
rgroup.byte 0x04++0x00
line.byte 0x00 "FMMU_NUM,FMMU Supported Register"
hexmask.byte 0x00 0.--7. 1. "NUMFMMU,Number of FMMU channels supported in the EtherCAT slave controller"
rgroup.byte 0x05++0x00
line.byte 0x00 "SYNC_MANAGER,SyncManager Supported Register"
hexmask.byte 0x00 0.--7. 1. "NUMSYNC,Number of SyncManager channels supported in the EtherCAT slave controller"
rgroup.byte 0x06++0x00
line.byte 0x00 "RAM_SIZE,RAM Size Register"
hexmask.byte 0x00 0.--7. 1. "RAMSIZE,Process data RAM size supported in the EtherCAT slave controller (unit: KB)"
rgroup.byte 0x07++0x00
line.byte 0x00 "PORT_DESC,Port Descriptor Register"
bitfld.byte 0x00 6.--7. "P3,Port 3 configuration" "0: Not implemented,1: Not configured (SII EEPROM),2: EBUS,3: MII"
bitfld.byte 0x00 4.--5. "P2,Port 2 configuration" "0: Not implemented,1: Not configured (SII EEPROM),2: EBUS,3: MII"
newline
bitfld.byte 0x00 2.--3. "P1,Port 1 configuration" "0: Not implemented,1: Not configured (SII EEPROM),2: EBUS,3: MII"
bitfld.byte 0x00 0.--1. "P0,Port 0 configuration" "0: Not implemented,1: Not configured (SII EEPROM),2: EBUS,3: MII"
rgroup.word 0x08++0x01
line.word 0x00 "FEATURE,ESC Features Supported Register"
bitfld.word 0x00 11. "FSCONFIG,Fixed FMMU/SyncManager configuration" "0: Variable configuration,1: Fixed configuration"
bitfld.word 0x00 10. "RWSUPP,EtherCAT read/write command support (BRW APRW FPRW)" "0: Supported,1: Not supported"
newline
bitfld.word 0x00 9. "LRW,EtherCAT LRW command support" "0: Supported,1: Not supported"
bitfld.word 0x00 8. "DCSYNC,Enhanced DC SYNC activation" "0: Not available,1: Available"
newline
bitfld.word 0x00 7. "FCS,Separate handling of FCS errors" "0: Not supported,1: Supported"
bitfld.word 0x00 6. "LINKDECMII,Enhanced Link Detection in MII" "0: Not available,1: Available"
newline
bitfld.word 0x00 3. "DCWID,Distributed Clock Width" "0: 32 bits,1: 64 bits"
bitfld.word 0x00 2. "DC,Distributed Clock" "0: Not available,1: Available"
newline
bitfld.word 0x00 0. "FMMU,FMMU Operation" "0: Bit oriented,1: Byte oriented"
rgroup.word 0x10++0x01
line.word 0x00 "STATION_ADR,Configured Station Address Register"
hexmask.word 0x00 0.--15. 1. "NODADDR,Node Addressing Address Indication"
group.word 0x12++0x01
line.word 0x00 "STATION_ALIAS,Configured Station Alias Register"
hexmask.word 0x00 0.--15. 1. "NODALIADDR,Alias Address Indication"
rgroup.byte 0x20++0x00
line.byte 0x00 "WR_REG_ENABLE,Write Register Enable Register"
bitfld.byte 0x00 0. "ENABLE,Register Write Protection Unlock" "0,1"
rgroup.byte 0x21++0x00
line.byte 0x00 "WR_REG_PROTECT,Write Register Protection Register"
bitfld.byte 0x00 0. "PROTECT,Register Write Protection Specification" "0: Protection disabled,1: Protection enabled"
rgroup.byte 0x30++0x00
line.byte 0x00 "ESC_WR_ENABLE,ESC Write Enable Register"
bitfld.byte 0x00 0. "ENABLE,Register/Memory Write Protection Unlock" "0,1"
rgroup.byte 0x31++0x00
line.byte 0x00 "ESC_WR_PROTECT,ESC Write Protection Register"
bitfld.byte 0x00 0. "PROTECT,Register/Memory Write Protection Specification" "0: Protection disabled,1: Protection enabled"
rgroup.byte 0x40++0x00
line.byte 0x00 "ESC_RESET_ECAT_R,ESC Reset ECAT Register for read"
bitfld.byte 0x00 0.--1. "RESET_ECAT,Reset Progress Status" "0: Others,1: After writing 0x52,2: After writing 0x45 (if 0x52 was written before),?..."
rgroup.byte 0x40++0x00
line.byte 0x00 "ESC_RESET_ECAT_W,ESC Reset ECAT Register for write"
hexmask.byte 0x00 0.--7. 1. "RESET_ECAT,Software Reset Setting"
group.byte 0x41++0x00
line.byte 0x00 "ESC_RESET_PDI_R,ESC Reset PDI Register for read"
bitfld.byte 0x00 0.--1. "RESET_PDI,Reset Progress Status" "0: Others,1: After writing 0x52,2: After writing 0x45 (if 0x52 was written before),?..."
group.byte 0x41++0x00
line.byte 0x00 "ESC_RESET_PDI_W,ESC Reset PDI Register for write"
hexmask.byte 0x00 0.--7. 1. "RESET_PDI,Software Reset Setting"
rgroup.long 0x100++0x03
line.long 0x00 "ESC_DL_CONTROL,ESC DL Control Register"
bitfld.long 0x00 24. "STAALIAS,Station Alias Status" "0: Ignore station alias,1: Alias can be used for all configured address.."
bitfld.long 0x00 16.--18. "RXFIFO,RX FIFO Size" "0: Shortened by 40 ns,1: Shortened by 40 ns,2: Shortened by 40 ns,3: Shortened by 40 ns,?,?,6: No change,7: Default"
newline
bitfld.long 0x00 14.--15. "LP3,Loop Port 3 Configuration" "0: Auto,1: Auto close,2: Open,3: Closed"
bitfld.long 0x00 12.--13. "LP2,Loop Port 2 Configuration" "0: Auto,1: Auto close,2: Open,3: Closed"
newline
bitfld.long 0x00 10.--11. "LP1,Loop Port 1 Configuration" "0: Auto,1: Auto close,2: Open,3: Closed"
bitfld.long 0x00 8.--9. "LP0,Loop Port 0 Configuration" "0: Auto,1: Auto close,2: Open,3: Closed"
newline
bitfld.long 0x00 1. "TEMPUSE,Temporary Use of Bits 15 to 8 Settings" "0: Permanent use,1: Use for about 1 second then revert to.."
bitfld.long 0x00 0. "FWDRULE,Forwarding Rule" "0: EtherCAT frames are processed,1: EtherCAT frames are processed"
rgroup.word 0x108++0x01
line.word 0x00 "PHYSICAL_RW_OFFSET,Physical Read/Write Offset Register"
hexmask.word 0x00 0.--15. 1. "RWOFFSET,Offset between Read and Write Addresses"
rgroup.word 0x110++0x01
line.word 0x00 "ESC_DL_STATUS,ESC DL Status Register"
bitfld.word 0x00 15. "COMP3,Port 3 Communication State Indication" "0: No stable communication,1: Communication established"
bitfld.word 0x00 14. "LP3,Loop Port 3 State Indication" "0: Open,1: Closed"
newline
bitfld.word 0x00 13. "COMP2,Port 2 Communication State Indication" "0: No stable communication,1: Communication established"
bitfld.word 0x00 12. "LP2,Loop Port 2 State Indication" "0: Open,1: Closed"
newline
bitfld.word 0x00 11. "COMP1,Port 1 Communication State Indication" "0: No stable communication,1: Communication established"
bitfld.word 0x00 10. "LP1,Loop Port 1 State Indication" "0: Open,1: Closed"
newline
bitfld.word 0x00 9. "COMP0,Port 0 Communication State Indication" "0: No stable communication,1: Communication established"
bitfld.word 0x00 8. "LP0,Loop Port 0 State Indication" "0: Open,1: Closed"
newline
bitfld.word 0x00 7. "PHYP3,Port 3 Link State Indication" "0: No link,1: Link detected"
bitfld.word 0x00 6. "PHYP2,Port 2 Link State Indication" "0: No link,1: Link detected"
newline
bitfld.word 0x00 5. "PHYP1,Port 1 Link State Indication" "0: No link,1: Link detected"
bitfld.word 0x00 4. "PHYP0,Port 0 Link State Indication" "0: No link,1: Link detected"
newline
bitfld.word 0x00 2. "ENHLINKD,Enhanced Link Detection Indication" "0: Deactivated for all ports,1: Activated for at least one port"
bitfld.word 0x00 1. "PDIWDST,PDI Watchdog Timer Status" "0: Timeout of the watchdog timer,1: Watchdog timer reloaded"
newline
bitfld.word 0x00 0. "PDIOPE,PDI/EEPROM Load State Indication" "0: EEPROM not loaded the PDI not operational..,1: EEPROM loaded correctly the PDI operational.."
rgroup.word 0x120++0x01
line.word 0x00 "AL_CONTROL,AL Control Register"
bitfld.word 0x00 5. "DEVICEID,Device ID Request" "0: No request is present,1: A request is present"
bitfld.word 0x00 4. "ERRINDACK,Error Indication Acknowledge (Response)" "0: Error Indication in AL status register is not..,1: Error Indication in AL status register is.."
newline
bitfld.word 0x00 0.--3. "INISTATE,Change the state transition of the device state machine" "?,1: Initial state request,2: Pre-operational state request,3: Bootstrap state request,4: Safe-operational state request,?,?,?,8: Operational state request,?..."
group.word 0x130++0x01
line.word 0x00 "AL_STATUS,AL Status Register"
bitfld.word 0x00 5. "DEVICEID,Device ID Load State Indication" "0: Loading failed,1: Loading was successful"
bitfld.word 0x00 4. "ERR,Error State Indication" "0: The device is in the state as requested or..,1: The device has not entered the requested.."
newline
bitfld.word 0x00 0.--3. "ACTSTATE,State Machine State Indication" "?,1: Initial state,2: Pre-operational state,3: Request bootstrap state,4: Safe-operational state,?,?,?,8: Operational state,?..."
group.word 0x134++0x01
line.word 0x00 "AL_STATUS_CODE,AL Status Code Register"
hexmask.word 0x00 0.--15. 1. "STATUSCODE,AL status code"
group.byte 0x138++0x00
line.byte 0x00 "RUN_LED_OVERRIDE,RUN LED Override Register"
bitfld.byte 0x00 4. "OVERRIDEEN,Override Setting" "0: Override disabled,1: Override enabled"
bitfld.byte 0x00 0.--3. "LEDCODE,LED Code Indication (FSM state: Bits [3:0] of the AL Status register AL_STATUS)" "0: Off (FSM: 1-Init),?,?,?,?,?,?,?,?,?,?,?,?,13: Blinking (FSM: 2-PreOp),14: Flickering (FSM: 3-Bootstrap),15: On (FSM: 8-Op)"
group.byte 0x139++0x00
line.byte 0x00 "ERR_LED_OVERRIDE,ERR LED Override Register"
bitfld.byte 0x00 4. "OVERRIDEEN,Override Setting" "0: Override disabled,1: Override enabled"
bitfld.byte 0x00 0.--3. "LEDCODE,LED Code Indication" "0: 0x0,?,?,?,?,?,?,?,?,?,?,?,?,13: Blinking,14: Flickering,15: 0xF"
rgroup.byte 0x140++0x00
line.byte 0x00 "PDI_CONTROL,PDI Control Register"
hexmask.byte 0x00 0.--7. 1. "PDI,Process Data Interface"
rgroup.byte 0x141++0x00
line.byte 0x00 "ESC_CONFIG,ESC Configuration Register"
bitfld.byte 0x00 7. "ENLP3,Port 3 Enhanced Link Detection Setting" "0: Disabled (if bit 9 of address 0 in the EEPROM..,1: Enabled"
bitfld.byte 0x00 6. "ENLP2,Port 2 Enhanced Link Detection Setting" "0: Disabled (if bit 9 of address 0 in the EEPROM..,1: Enabled"
newline
bitfld.byte 0x00 5. "ENLP1,Port 1 Enhanced Link Detection Setting" "0: Disabled (if bit 9 of address 0 in the EEPROM..,1: Enabled"
bitfld.byte 0x00 4. "ENLP0,Port 0 Enhanced Link Detection Setting" "0: Disabled (if bit 9 of address 0 in the EEPROM..,1: Enabled"
newline
bitfld.byte 0x00 3. "DCLATCH,Sets the latch input unit for distributed clocks" "0: Disabled (power saving),1: Enabled"
bitfld.byte 0x00 2. "DCSYNC,Sets the SYNC output unit for distributed clocks (fixed to 1 in this LSI)" "0: Disabled (power saving),1: Enabled"
newline
bitfld.byte 0x00 1. "ENLALLP,Sets enhanced link detection for all ports" "0: Disabled (if bits 15 to 12 of address 0 in..,1: Enabled at all ports"
bitfld.byte 0x00 0. "DEVEMU,Device emulation (control of AL status)" "0: The AL status register must be set by the PDI,1: The AL status register is set to a value.."
rgroup.byte 0x150++0x00
line.byte 0x00 "PDI_CONFIG,PDI Configuration Register"
bitfld.byte 0x00 5.--7. "ONCHIPBUS,On-Chip Bus Type Indication" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 0.--4. "ONCHIPBUSCLK,On-Chip Bus Clock Indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.byte 0x151++0x00
line.byte 0x00 "SYNC_LATCH_CONFIG,SYNC/LATCH PDI Configuration Register"
bitfld.byte 0x00 7. "SYNC1MAP,SYNC1 State Mapping Indication" "0: Disabled,1: Enabled"
bitfld.byte 0x00 6. "SYNCLAT1,SYNC1/LATCH1 Indication" "0: LATCH1 input,1: SYNC1 output"
newline
bitfld.byte 0x00 4.--5. "SYNC1OUT,SYNC1 Output Driver and Polarity Indication" "0,1,2,3"
bitfld.byte 0x00 3. "SYNC0MAP,SYNC0 State Mapping Indication" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 2. "SYNCLAT0,SYNC0/LATCH0 Indication" "0: LATCH0 input,1: SYNC0 output"
bitfld.byte 0x00 0.--1. "SYNC0OUT,SYNC0 Output Driver and Polarity Indication" "0,1,2,3"
rgroup.word 0x152++0x01
line.word 0x00 "EXT_PDI_CONFIG,Extended PDI Configuration Register"
bitfld.word 0x00 0.--1. "DATABUSWID,PDI Data Bus Width Indication" "0: 4 bytes,1: 1 byte,2: 2 bytes,3: Reserved"
rgroup.word 0x200++0x01
line.word 0x00 "ECAT_EVENT_MASK,ECAT Event Mask Register"
hexmask.word 0x00 0.--15. 1. "ECATEVMASK,Event Request Mask Setting"
group.long 0x204++0x03
line.long 0x00 "AL_EVENT_MASK,AL Event Mask Register"
hexmask.long 0x00 0.--31. 1. "ALEVMASK,Event Request Mask Setting"
rgroup.word 0x210++0x01
line.word 0x00 "ECAT_EVENT_REQ,ECAT Event Request Register"
bitfld.word 0x00 11. "SMSTA7,Mirror value of SyncManager 7 Status Indication" "0: No Sync channel 7 event,1: Sync channel 7 event pending"
bitfld.word 0x00 10. "SMSTA6,Mirror value of SyncManager 6 Status Indication" "0: No Sync channel 6 event,1: Sync channel 6 event pending"
newline
bitfld.word 0x00 9. "SMSTA5,Mirror value of SyncManager 5 Status Indication" "0: No Sync channel 5 event,1: Sync channel 5 event pending"
bitfld.word 0x00 8. "SMSTA4,Mirror value of SyncManager 4 Status Indication" "0: No Sync channel 4 event,1: Sync channel 4 event pending"
newline
bitfld.word 0x00 7. "SMSTA3,Mirror value of SyncManager 3 Status Indication" "0: No Sync channel 3 event,1: Sync channel 3 event pending"
bitfld.word 0x00 6. "SMSTA2,Mirror value of SyncManager 2 Status Indication" "0: No Sync channel 2 event,1: Sync channel 2 event pending"
newline
bitfld.word 0x00 5. "SMSTA1,Mirror value of SyncManager 1 Status Indication" "0: No Sync channel 1 event,1: Sync channel 1 event pending"
bitfld.word 0x00 4. "SMSTA0,Mirror value of SyncManager 0 Status Indication" "0: No Sync channel 0 event,1: Sync channel 0 event pending"
newline
bitfld.word 0x00 3. "ALSTA,AL Status Event State Indication" "0: No change in AL status,1: AL status change"
bitfld.word 0x00 2. "DLSTA,DL Status Event State Indication" "0: No change in DL status,1: DL status change"
newline
bitfld.word 0x00 0. "DCLATCH,DC Latch Event State Indication" "0: No change on DC latch inputs,1: At least one change on DC latch inputs"
rgroup.long 0x220++0x03
line.long 0x00 "AL_EVENT_REQ,AL Event Request Register"
bitfld.long 0x00 15. "SMINT7,SyncManager 7 interrupt (bit 0 or 1 of the SyncManager status register (0x083D))" "0: No SyncManager 7 interrupt,1: SyncManager 7 interrupt pending"
bitfld.long 0x00 14. "SMINT6,SyncManager 6 interrupt (bit 0 or 1 of the SyncManager status register (0x0835))" "0: No SyncManager 6 interrupt,1: SyncManager 6 interrupt pending"
newline
bitfld.long 0x00 13. "SMINT5,SyncManager 5 interrupt (bit 0 or 1 of the SyncManager status register (0x082D))" "0: No SyncManager 5 interrupt,1: SyncManager 5 interrupt pending"
bitfld.long 0x00 12. "SMINT4,SyncManager 4 interrupt (bit 0 or 1 of the SyncManager status register (0x0825))" "0: No SyncManager 4 interrupt,1: SyncManager 4 interrupt pending"
newline
bitfld.long 0x00 11. "SMINT3,SyncManager 3 interrupt (bit 0 or 1 of the SyncManager status register (0x081D))" "0: No SyncManager 3 interrupt,1: SyncManager 3 interrupt pending"
bitfld.long 0x00 10. "SMINT2,SyncManager 2 interrupt (bit 0 or 1 of the SyncManager status register (0x0815))" "0: No SyncManager 2 interrupt,1: SyncManager 2 interrupt pending"
newline
bitfld.long 0x00 9. "SMINT1,SyncManager 1 interrupt (bit 0 or 1 of the SyncManager status register (0x080D))" "0: No SyncManager 1 interrupt,1: SyncManager 1 interrupt pending"
bitfld.long 0x00 8. "SMINT0,SyncManager 0 interrupt (bit 0 or 1 of the SyncManager status register (0x0805))" "0: No SyncManager 0 interrupt,1: SyncManager 0 interrupt pending"
newline
bitfld.long 0x00 6. "WDPD,Watchdog Process Data Indication" "0: Valid,1: Timeout"
bitfld.long 0x00 4. "SYNCACT,SyncManager Activation Indication" "0: No change in any SyncManager,1: At least one SyncManager changed"
newline
bitfld.long 0x00 3. "DCSYNC1STA,DC SYNC1 State Indication" "0,1"
bitfld.long 0x00 2. "DCSYNC0STA,DC SYNC0 State Indication" "0,1"
newline
bitfld.long 0x00 1. "DCLATCH,DC Latch Event State Indication" "0: No change on DC latch inputs,1: At least one change on DC latch inputs"
bitfld.long 0x00 0. "ALCTRL,AL Control Event State Indication" "0: No change in the AL control register,1: The AL control register has been written"
repeat 3. (strings "0" "1" "2" )(list 0x00 0x02 0x04 )
rgroup.word ($2+0x300)++0x01
line.word 0x00 "RX_ERR_COUNT$1,RX Error Counter"
hexmask.word.byte 0x00 8.--15. 1. "RXERRCNT,RX Frame Error Counter Value Indication"
hexmask.word.byte 0x00 0.--7. 1. "INVFRMCNT,Invalid Frame Counter Value Indication"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x01 0x02 )
rgroup.byte ($2+0x308)++0x00
line.byte 0x00 "FWD_RX_ERR_COUNT$1,Forwarded RX Error Counter"
hexmask.byte 0x00 0.--7. 1. "FWDERRCNT,Forwarded Error Counter Value Indication"
repeat.end
rgroup.byte 0x30C++0x00
line.byte 0x00 "ECAT_PROC_ERR_COUNT,ECAT Processing Unit Error Counter Register"
hexmask.byte 0x00 0.--7. 1. "EPUERRCNT,Processing Unit Error Counter Value Indication"
rgroup.byte 0x30D++0x00
line.byte 0x00 "PDI_ERR_COUNT,PDI Error Counter Register"
hexmask.byte 0x00 0.--7. 1. "PDIERRCNT,PDI Error Counter Value Indication"
repeat 3. (strings "0" "1" "2" )(list 0x00 0x01 0x02 )
rgroup.byte ($2+0x310)++0x00
line.byte 0x00 "LOST_LINK_COUNT$1,Lost Link Counter"
hexmask.byte 0x00 0.--7. 1. "LOSTLINKCNT,Lost Link Counter Value Indication"
repeat.end
rgroup.word 0x400++0x01
line.word 0x00 "WD_DIVIDE,Watchdog Divider Register"
hexmask.word 0x00 0.--15. 1. "WDDIV,Watchdog Clock Frequency Divisor Setting"
rgroup.word 0x410++0x01
line.word 0x00 "WDT_PDI,Watchdog Time PDI Register"
hexmask.word 0x00 0.--15. 1. "WDTIMPDI,Watchdog Overflow Time Setting"
rgroup.word 0x420++0x01
line.word 0x00 "WDT_DATA,Watchdog Time Process Data Register"
hexmask.word 0x00 0.--15. 1. "WDTIMPD,Watchdog Overflow Time Setting"
rgroup.word 0x440++0x01
line.word 0x00 "WDS_DATA,Watchdog Status Process Data Register"
bitfld.word 0x00 0. "WDSTAPD,Watchdog State Indication" "0: The timeout period of the process data..,1: The process data watchdog timer is active or.."
rgroup.byte 0x442++0x00
line.byte 0x00 "WDC_DATA,Watchdog Counter Process Data Register"
hexmask.byte 0x00 0.--7. 1. "WDCNTPD,Watchdog Counter Value Indication"
rgroup.byte 0x443++0x00
line.byte 0x00 "WDC_PDI,Watchdog Counter PDI Register"
hexmask.byte 0x00 0.--7. 1. "WDCNTPDI,Watchdog Counter Value Indication"
rgroup.byte 0x500++0x00
line.byte 0x00 "EEP_CONF,EEPROM Configuration Register"
bitfld.byte 0x00 1. "FORCEECAT,EEPROM Access Right Change" "0: No change,1: Reset bit 0 of the EEPROM PDI Access State.."
bitfld.byte 0x00 0. "CTRLPDI,PDI EEPROM Control" "0: The PDI has no EEPROM control,1: The PDI has EEPROM control"
group.byte 0x501++0x00
line.byte 0x00 "EEP_STATE,EEPROM PDI Access State Register"
bitfld.byte 0x00 0. "PDIACCESS,EEPROM Access Right Setting" "0: Prohibits the PDI from access to the EEPROM,1: The PDI has access to the EEPROM"
group.word 0x502++0x01
line.word 0x00 "EEP_CONT_STAT,EEPROM Control/Status Register"
rbitfld.word 0x00 15. "BUSY,EEPROM Interface State Indication" "0: The EEPROM interface is idle,1: The EEPROM interface is busy"
rbitfld.word 0x00 14. "WRENERR,Write Enable Error Indication" "0: No error,1: Write command without write enable"
newline
rbitfld.word 0x00 13. "ACKCMDERR,Acknowledge/Command Error Indication" "0: No error,1: Missing EEPROM acknowledge or invalid command"
rbitfld.word 0x00 12. "LOADSTA,EEPROM Loading Status Indication" "0: EEPROM has been loaded and device information..,1: EEPROM has not been loaded and device.."
newline
rbitfld.word 0x00 11. "CKSUMERR,Checksum Error Indication" "0: No error in the checksum,1: Error in the checksum"
bitfld.word 0x00 8.--10. "COMMAND,Command" "0: No command/EEPROM idle (clear error bits),1: ,2: ,?,4: Reload,?..."
newline
rbitfld.word 0x00 7. "PROMSIZE,EEPROM Algorithm Indication" "0: 1 address byte (1-Kbit to 16-Kbit EEPROMs),1: 2 address bytes (32-Kbit to 4-Mbit EEPROMs)"
rbitfld.word 0x00 6. "READBYTE,EEPROM Read Byte Indication" "0: 4 bytes,1: 8 bytes"
newline
rbitfld.word 0x00 0. "ECATWREN,ECAT Write Enable" "0: Write requests are disabled,1: Write requests are enabled"
group.long 0x504++0x03
line.long 0x00 "EEP_ADR,EEPROM Address Register"
hexmask.long 0x00 0.--31. 1. "ADDRESS,EEPROM Address Setting"
group.long 0x508++0x03
line.long 0x00 "EEP_DATA,EEPROM Data Register"
hexmask.long.word 0x00 16.--31. 1. "HIDATA,Data read from the EEPROM (upper 2 bytes)"
hexmask.long.word 0x00 0.--15. 1. "LODATA,Data to be written to the EEPROM or data read from the EEPROM (lower 2 bytes)"
group.word 0x510++0x01
line.word 0x00 "MII_CONT_STAT,MII Management Control/Status Register"
rbitfld.word 0x00 15. "BUSY,MII Management State Indication" "0: MII management interface is idle,1: MII management interface is busy"
rbitfld.word 0x00 14. "CMDERR,Command Error Indication" "0: Last command was successful,1: Invalid command or write command without.."
newline
bitfld.word 0x00 13. "READERR,Read Error Indication" "0: No read error,1: Read error occurred (PHY or register not.."
bitfld.word 0x00 8.--9. "COMMAND,Command" "0: No command/MI idle (clear error bits),1: ,2: ,?..."
newline
rbitfld.word 0x00 3.--7. "PHYOFFSET,PHY Address Offset Indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rbitfld.word 0x00 2. "MILINK,MI Link Detection" "0: Not available,1: Available"
newline
rbitfld.word 0x00 1. "PDICTRL,PDI Control Indication" "0: Only ECAT control,1: PDI control possible"
rbitfld.word 0x00 0. "WREN,Write Enable" "0: Disabled,1: Enabled"
group.byte 0x512++0x00
line.byte 0x00 "PHY_ADR,PHY Address Register"
bitfld.byte 0x00 0.--4. "PHYADDR,PHY Address Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.byte 0x513++0x00
line.byte 0x00 "PHY_REG_ADR,PHY Register Address Register"
bitfld.byte 0x00 0.--4. "PHYREGADDR,Address of PHY register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.word 0x514++0x01
line.word 0x00 "PHY_DATA,PHY Data Register"
hexmask.word 0x00 0.--15. 1. "PHYREGDATA,PHY Register Data Indication/Setting"
rgroup.byte 0x516++0x00
line.byte 0x00 "MII_ECAT_ACS_STAT,MII Management ECAT Access State Register"
bitfld.byte 0x00 0. "ACSMII,MII Management Interface Access Right Setting" "0: Enables access to the MII management..,1: Exclusive access to the MII management.."
group.byte 0x517++0x00
line.byte 0x00 "MII_PDI_ACS_STAT,MII Management PDI Access State Register"
rbitfld.byte 0x00 1. "FORPDI,Forced change of access by the PDI (forced change of bit 0)" "0: The value of bit 0 of this register is not..,1: The value of bit 0 of this register is reset.."
bitfld.byte 0x00 0. "ACSMII,Right of access to the MII management interface" "0: Access to the MII management interface by the..,1: Access to the MII management interface by the.."
rgroup.long 0x600++0x03
line.long 0x00 "FMMU0_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x610++0x03
line.long 0x00 "FMMU1_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x620++0x03
line.long 0x00 "FMMU2_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x630++0x03
line.long 0x00 "FMMU3_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x640++0x03
line.long 0x00 "FMMU4_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x650++0x03
line.long 0x00 "FMMU5_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x660++0x03
line.long 0x00 "FMMU6_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.long 0x670++0x03
line.long 0x00 "FMMU7_L_START_ADR,FMMU Logical Start Address"
hexmask.long 0x00 0.--31. 1. "LSTAADR,Logical Start Address Setting"
rgroup.word 0x604++0x01
line.word 0x00 "FMMU0_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x614++0x01
line.word 0x00 "FMMU1_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x624++0x01
line.word 0x00 "FMMU2_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x634++0x01
line.word 0x00 "FMMU3_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x644++0x01
line.word 0x00 "FMMU4_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x654++0x01
line.word 0x00 "FMMU5_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x664++0x01
line.word 0x00 "FMMU6_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.word 0x674++0x01
line.word 0x00 "FMMU7_LEN,FMMU Length"
hexmask.word 0x00 0.--15. 1. "FMMULEN,Area Size Specification"
rgroup.byte 0x606++0x00
line.byte 0x00 "FMMU0_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x616++0x00
line.byte 0x00 "FMMU1_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x626++0x00
line.byte 0x00 "FMMU2_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x636++0x00
line.byte 0x00 "FMMU3_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x646++0x00
line.byte 0x00 "FMMU4_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x656++0x00
line.byte 0x00 "FMMU5_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x666++0x00
line.byte 0x00 "FMMU6_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x676++0x00
line.byte 0x00 "FMMU7_L_START_BIT,FMMU Logical Start Bit"
bitfld.byte 0x00 0.--2. "LSTABIT,Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x607++0x00
line.byte 0x00 "FMMU0_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x617++0x00
line.byte 0x00 "FMMU1_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x627++0x00
line.byte 0x00 "FMMU2_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x637++0x00
line.byte 0x00 "FMMU3_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x647++0x00
line.byte 0x00 "FMMU4_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x657++0x00
line.byte 0x00 "FMMU5_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x667++0x00
line.byte 0x00 "FMMU6_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x677++0x00
line.byte 0x00 "FMMU7_L_STOP_BIT,FMMU Logical Stop Bit"
bitfld.byte 0x00 0.--2. "LSTPBIT,Last Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.word 0x608++0x01
line.word 0x00 "FMMU0_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x618++0x01
line.word 0x00 "FMMU1_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x628++0x01
line.word 0x00 "FMMU2_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x638++0x01
line.word 0x00 "FMMU3_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x648++0x01
line.word 0x00 "FMMU4_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x658++0x01
line.word 0x00 "FMMU5_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x668++0x01
line.word 0x00 "FMMU6_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.word 0x678++0x01
line.word 0x00 "FMMU7_P_START_ADR,FMMU Physical Start Address"
hexmask.word 0x00 0.--15. 1. "PHYSTAADR,Physical Start Address Setting"
rgroup.byte 0x60A++0x00
line.byte 0x00 "FMMU0_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x61A++0x00
line.byte 0x00 "FMMU1_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x62A++0x00
line.byte 0x00 "FMMU2_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x63A++0x00
line.byte 0x00 "FMMU3_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x64A++0x00
line.byte 0x00 "FMMU4_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x65A++0x00
line.byte 0x00 "FMMU5_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x66A++0x00
line.byte 0x00 "FMMU6_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x67A++0x00
line.byte 0x00 "FMMU7_P_START_BIT,FMMU Physical Start Bit"
bitfld.byte 0x00 0.--2. "PHYSTABIT,Physical Start Bit Setting" "0,1,2,3,4,5,6,7"
rgroup.byte 0x60B++0x00
line.byte 0x00 "FMMU0_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x61B++0x00
line.byte 0x00 "FMMU1_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x62B++0x00
line.byte 0x00 "FMMU2_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x63B++0x00
line.byte 0x00 "FMMU3_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x64B++0x00
line.byte 0x00 "FMMU4_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x65B++0x00
line.byte 0x00 "FMMU5_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x66B++0x00
line.byte 0x00 "FMMU6_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x67B++0x00
line.byte 0x00 "FMMU7_TYPE,FMMU Type"
bitfld.byte 0x00 1. "WRITE,Write Access Mapping Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0. "READ,Read Access Mapping Setting" "0: Disabled,1: Enabled"
rgroup.byte 0x60C++0x00
line.byte 0x00 "FMMU0_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x61C++0x00
line.byte 0x00 "FMMU1_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x62C++0x00
line.byte 0x00 "FMMU2_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x63C++0x00
line.byte 0x00 "FMMU3_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x64C++0x00
line.byte 0x00 "FMMU4_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x65C++0x00
line.byte 0x00 "FMMU5_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x66C++0x00
line.byte 0x00 "FMMU6_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x67C++0x00
line.byte 0x00 "FMMU7_ACT,FMMU Activate"
bitfld.byte 0x00 0. "ACTIVATE,FMMU Enable/Disable" "0: Disabled,1: Enabled"
rgroup.word 0x800++0x01
line.word 0x00 "SM0_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x808++0x01
line.word 0x00 "SM1_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x810++0x01
line.word 0x00 "SM2_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x818++0x01
line.word 0x00 "SM3_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x820++0x01
line.word 0x00 "SM4_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x828++0x01
line.word 0x00 "SM5_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x830++0x01
line.word 0x00 "SM6_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x838++0x01
line.word 0x00 "SM7_P_START_ADR,SyncManager Physical Start Address"
hexmask.word 0x00 0.--15. 1. "SMSTAADDR,Physical Start Address Setting"
rgroup.word 0x802++0x01
line.word 0x00 "SM0_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x80A++0x01
line.word 0x00 "SM1_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x812++0x01
line.word 0x00 "SM2_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x81A++0x01
line.word 0x00 "SM3_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x822++0x01
line.word 0x00 "SM4_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x82A++0x01
line.word 0x00 "SM5_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x832++0x01
line.word 0x00 "SM6_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.word 0x83A++0x01
line.word 0x00 "SM7_LEN,SyncManager Length"
hexmask.word 0x00 0.--15. 1. "SMLEN,Area Size Setting"
rgroup.byte 0x804++0x00
line.byte 0x00 "SM0_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x80C++0x00
line.byte 0x00 "SM1_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x814++0x00
line.byte 0x00 "SM2_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x81C++0x00
line.byte 0x00 "SM3_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x824++0x00
line.byte 0x00 "SM4_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x82C++0x00
line.byte 0x00 "SM5_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x834++0x00
line.byte 0x00 "SM6_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x83C++0x00
line.byte 0x00 "SM7_CONTROL,SyncManager Control"
bitfld.byte 0x00 6. "WDTRGEN,Watchdog Trigger Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 5. "IRQPDI,AL Event Interrupt Setting" "0: Disabled,1: Enabled"
newline
bitfld.byte 0x00 4. "IRQECAT,ECAT Event Interrupt Setting" "0: Disabled,1: Enabled"
bitfld.byte 0x00 2.--3. "DIR,Transfer Direction Setting" "0: Read (ECAT: read access PDI: write access),1: Write (ECAT: write access PDI: read access),?..."
newline
bitfld.byte 0x00 0.--1. "OPEMODE,Operating Mode Setting" "0: Buffer mode (3-buffer mode),?,2: Mailbox mode (single buffer mode),?..."
rgroup.byte 0x805++0x00
line.byte 0x00 "SM0_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x80D++0x00
line.byte 0x00 "SM1_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x815++0x00
line.byte 0x00 "SM2_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x81D++0x00
line.byte 0x00 "SM3_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x825++0x00
line.byte 0x00 "SM4_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x82D++0x00
line.byte 0x00 "SM5_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x835++0x00
line.byte 0x00 "SM6_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x83D++0x00
line.byte 0x00 "SM7_STATUS,SyncManager Status"
bitfld.byte 0x00 7. "WRBUF,Write State Indication" "0,1"
bitfld.byte 0x00 6. "RDBUF,Read State Indication" "0,1"
newline
bitfld.byte 0x00 4.--5. "BUFFERED,Buffer Status Indication" "0: 1st buffer,1: 2nd buffer,2: 3rd buffer,3: No buffer written"
bitfld.byte 0x00 3. "MAILBOX,Mailbox Status Indication" "0: Mailbox empty,1: Mailbox full"
newline
bitfld.byte 0x00 1. "INTRD,Read Complete Interrupt State Indication" "0: Indicates that the buffer was successfully,1: Indicates that the first byte of the buffer.."
bitfld.byte 0x00 0. "INTWR,Write Complete Interrupt State Indication" "0: Indicates that the buffer was successfully..,1: Indicates that the first byte of the buffer.."
rgroup.byte 0x806++0x00
line.byte 0x00 "SM0_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x80E++0x00
line.byte 0x00 "SM1_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x816++0x00
line.byte 0x00 "SM2_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x81E++0x00
line.byte 0x00 "SM3_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x826++0x00
line.byte 0x00 "SM4_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x82E++0x00
line.byte 0x00 "SM5_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x836++0x00
line.byte 0x00 "SM6_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
rgroup.byte 0x83E++0x00
line.byte 0x00 "SM7_ACT,SyncManager Activate"
bitfld.byte 0x00 7. "LATCHPDI,PDI Latch Event Specification" "0: No latch events,1: Generates latch events if the PDI switches.."
bitfld.byte 0x00 6. "LATCHECAT,ECAT Latch Event Specification" "0: No latch events,1: Generates latch events if the EtherCAT master.."
newline
bitfld.byte 0x00 1. "REPEATREQ,Repeat Request" "0,1"
bitfld.byte 0x00 0. "SMEN,SyncManager Enable/Disable" "0: Disabled,1: Enabled"
group.byte 0x807++0x00
line.byte 0x00 "SM0_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x80F++0x00
line.byte 0x00 "SM1_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x817++0x00
line.byte 0x00 "SM2_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x81F++0x00
line.byte 0x00 "SM3_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x827++0x00
line.byte 0x00 "SM4_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x82F++0x00
line.byte 0x00 "SM5_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x837++0x00
line.byte 0x00 "SM6_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
group.byte 0x83F++0x00
line.byte 0x00 "SM7_PDI_CONT,SyncManager PDI Control"
bitfld.byte 0x00 1. "REPEATACK,Repeat Acknowledge" "0,1"
bitfld.byte 0x00 0. "DEACTIVE,SyncManager Operation Indication/Setting" "0: Read: Normal operation,1: Read: SyncManager is deactivated and reset"
rgroup.long 0x900++0x03
line.long 0x00 "DC_RCV_TIME_PORT0,Receive Time Port 0 Register"
hexmask.long 0x00 0.--31. 1. "RCVTIME0,Receive Time Indication/Latch"
rgroup.long 0x904++0x03
line.long 0x00 "DC_RCV_TIME_PORT1,Receive Time Port 1 Register"
hexmask.long 0x00 0.--31. 1. "RCVTIME1,Receive Time Indication"
rgroup.long 0x908++0x03
line.long 0x00 "DC_RCV_TIME_PORT2,Receive Time Port 2 Register"
hexmask.long 0x00 0.--31. 1. "RCVTIME2,Receive Time Indication"
rgroup.long 0x910++0x03
line.long 0x00 "DC_SYS_TIME_L,System Time Register L"
rgroup.long 0x914++0x03
line.long 0x00 "DC_SYS_TIME_H,System Time Register H"
rgroup.long 0x918++0x03
line.long 0x00 "DC_RCV_TIME_UNIT_L,Receive Time ECAT Processing Unit Register L"
rgroup.long 0x91C++0x03
line.long 0x00 "DC_RCV_TIME_UNIT_H,Receive Time ECAT Processing Unit Register H"
rgroup.long 0x920++0x03
line.long 0x00 "DC_SYS_TIME_OFFSET_L,System Time Offset Register L"
rgroup.long 0x924++0x03
line.long 0x00 "DC_SYS_TIME_OFFSET_H,System Time Offset Register H"
rgroup.long 0x928++0x03
line.long 0x00 "DC_SYS_TIME_DELAY,System Time Delay Register"
hexmask.long 0x00 0.--31. 1. "SYSTIMDLY,Propagation Delay Indication"
rgroup.long 0x92C++0x03
line.long 0x00 "DC_SYS_TIME_DIFF,System Time Difference Register"
bitfld.long 0x00 31. "LCP,System Time Greater/Less Indication" "0: Local copy of the system time greater than or..,1: Local copy of the system time less than the.."
hexmask.long 0x00 0.--30. 1. "DIFF,System Time Mean Difference Indication"
rgroup.word 0x930++0x01
line.word 0x00 "DC_SPEED_COUNT_START,Speed Counter Start Register"
hexmask.word 0x00 0.--14. 1. "SPDCNTSTRT,Drift Correction Bandwidth Setting"
rgroup.word 0x932++0x01
line.word 0x00 "DC_SPEED_COUNT_DIFF,Speed Counter Difference Register"
hexmask.word 0x00 0.--15. 1. "SPDCNTDIFF,Clock Period Deviation Indication"
rgroup.byte 0x934++0x00
line.byte 0x00 "DC_SYS_TIME_DIFF_FIL_DEPTH,System Time Difference Filter Depth Register"
bitfld.byte 0x00 0.--3. "SYSTIMDEP,Filter Depth Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.byte 0x935++0x00
line.byte 0x00 "DC_SPEED_COUNT_FIL_DEPTH,Speed Counter Filter Depth Register"
bitfld.byte 0x00 0.--3. "CLKPERDEP,Filter Depth Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.byte 0x980++0x00
line.byte 0x00 "DC_CYC_CONT,Cyclic Unit Control Register"
bitfld.byte 0x00 5. "LATCH1,Latch Input Unit 1 Control Setting" "0: ECAT control,1: PDI control"
bitfld.byte 0x00 4. "LATCH0,Latch Input Unit 0 Control Setting" "0: ECAT control,1: PDI control"
newline
bitfld.byte 0x00 0. "SYNCOUT,SYNC Output Unit Control Setting" "0: ECAT control,1: PDI control"
group.byte 0x981++0x00
line.byte 0x00 "DC_ACT,Activation Register"
bitfld.byte 0x00 7. "DBGPULSE,Debug Pulse Setting" "0: Deactivated,1: Immediately generates a single debug ping on.."
bitfld.byte 0x00 6. "NEARFUTURE,Near Future Range Setting" "0: Up to 263 ns from now (1/2 of the DC width),1: Up to 231 ns from now (about 2.1 sec.)"
newline
bitfld.byte 0x00 5. "STARTTIME,Start Time Plausibility" "0: Disabled,1: Sync signal is generated immediately if the.."
bitfld.byte 0x00 4. "EXTSTARTTIME,Start Time Cyclic Operation Extension" "0: No extension,1: Extends the start time written with 32 bits.."
newline
bitfld.byte 0x00 3. "AUTOACT,SYNC Output Unit Activation" "0: Deactivated,1: Activated"
bitfld.byte 0x00 2. "SYNC1,SYNC1 Output Setting" "0: Deactivated,1: SYNC1 pulse output is generated"
newline
bitfld.byte 0x00 1. "SYNC0,SYNC0 Output Setting" "0: Deactivated,1: SYNC0 pulse output is generated"
bitfld.byte 0x00 0. "SYNCACT,Sync Output Unit Activation" "0: Deactivated,1: Activated"
rgroup.word 0x982++0x01
line.word 0x00 "DC_PULSE_LEN,SYNC Signal Pulse Length Register"
hexmask.word 0x00 0.--15. 1. "PULSELEN,SYNC Signal Pulse Length Indication"
rgroup.byte 0x984++0x00
line.byte 0x00 "DC_ACT_STAT,Activation Status Register"
bitfld.byte 0x00 2. "STARTTIME,Plausibility Result Indication" "0: The start time is within the near future,1: The start time is out of the near future"
bitfld.byte 0x00 1. "SYNC1ACT,SYNC1 Status Indication" "0: First SYNC1 pulse is not pending,1: First SYNC1 pulse is pending"
newline
bitfld.byte 0x00 0. "SYNC0ACT,SYNC0 Status Indication" "0: First SYNC0 pulse is not pending,1: First SYNC0 pulse is pending"
rgroup.byte 0x98E++0x00
line.byte 0x00 "DC_SYNC0_STAT,SYNC0 Status Register"
bitfld.byte 0x00 0. "SYNC0STA,SYNC0 State Indication" "0,1"
rgroup.byte 0x98F++0x00
line.byte 0x00 "DC_SYNC1_STAT,SYNC1 Status Register"
bitfld.byte 0x00 0. "SYNC1STA,SYNC1 State Indication" "0,1"
group.long 0x990++0x03
line.long 0x00 "DC_CYC_START_TIME_L,Start Time Cyclic Operation/Next SYNC0 Pulse Register L"
group.long 0x994++0x03
line.long 0x00 "DC_CYC_START_TIME_H,Start Time Cyclic Operation/Next SYNC0 Pulse Register H"
rgroup.long 0x998++0x03
line.long 0x00 "DC_NEXT_SYNC1_PULSE_L,Next SYNC1 Pulse Register L"
rgroup.long 0x99C++0x03
line.long 0x00 "DC_NEXT_SYNC1_PULSE_H,Next SYNC1 Pulse Register H"
group.long 0x9A0++0x03
line.long 0x00 "DC_SYNC0_CYC_TIME,SYNC0 Cycle Time Register"
hexmask.long 0x00 0.--31. 1. "SYNC0CYC,Time Between Consecutive SYNC0 Pulses"
group.long 0x9A4++0x03
line.long 0x00 "DC_SYNC1_CYC_TIME,SYNC1 Cycle Time Register"
hexmask.long 0x00 0.--31. 1. "SYNC1CYC,Time between SYNC1 and SYNC0 Pulses"
group.byte 0x9A8++0x00
line.byte 0x00 "DC_LATCH0_CONT,Latch 0 Control Register"
bitfld.byte 0x00 1. "NEGEDGE,Latch 0 Negative Edge Function Setting" "0: Continuous latch active,1: Single event (only first event active)"
bitfld.byte 0x00 0. "POSEDGE,Latch 0 Positive Edge Function Setting" "0: Continuous latch active,1: Single event (only first event active)"
group.byte 0x9A9++0x00
line.byte 0x00 "DC_LATCH1_CONT,Latch 1 Control Register"
bitfld.byte 0x00 1. "NEGEDGE,Latch 1 Negative Edge Function Setting" "0: Continuous Latch active,1: Single event (only first event active)"
bitfld.byte 0x00 0. "POSEDGE,Latch 1 Positive Edge Function Setting" "0: Continuous latch active,1: Single event (only first event active)"
rgroup.byte 0x9AE++0x00
line.byte 0x00 "DC_LATCH0_STAT,Latch 0 Status Register"
bitfld.byte 0x00 2. "PINSTATE,Latch 0 Input Pin State Indication" "0,1"
bitfld.byte 0x00 1. "EVENTNEG,Latch 0 Negative Edge Event Indication" "0: Falling edge not detected or continuous mode,1: Falling edge detected and mode is single-event"
newline
bitfld.byte 0x00 0. "EVENTPOS,Latch 0 Positive Edge Event Indication" "0: Rising edge not detected or continuous mode,1: Rising edge detected and mode is single-event"
rgroup.byte 0x9AF++0x00
line.byte 0x00 "DC_LATCH1_STAT,Latch 1 Status Register"
bitfld.byte 0x00 2. "PINSTATE,Latch 1 Input Pin State Indication" "0,1"
bitfld.byte 0x00 1. "EVENTNEG,Latch 1 Negative Edge Event Indication" "0: Falling edge not detected or continuous mode,1: Falling edge detected and mode is single-event"
newline
bitfld.byte 0x00 0. "EVENTPOS,Latch 1 Positive Edge Event Indication" "0: Rising edge not detected or continuous mode,1: Rising edge detected and mode is single-event"
rgroup.long 0x9B0++0x03
line.long 0x00 "DC_LATCH0_TIME_POS_L,Latch 0 Time Positive Edge Register L"
rgroup.long 0x9B4++0x03
line.long 0x00 "DC_LATCH0_TIME_POS_H,Latch 0 Time Positive Edge Register H"
rgroup.long 0x9B8++0x03
line.long 0x00 "DC_LATCH0_TIME_NEG_L,Latch 0 Time Negative Edge Register L"
rgroup.long 0x9BC++0x03
line.long 0x00 "DC_LATCH0_TIME_NEG_H,Latch 0 Time Negative Edge Register H"
rgroup.long 0x9C0++0x03
line.long 0x00 "DC_LATCH1_TIME_POS_L,Latch 1 Time Positive Edge Register L"
rgroup.long 0x9C4++0x03
line.long 0x00 "DC_LATCH1_TIME_POS_H,Latch 1 Time Positive Edge Register H"
rgroup.long 0x9C8++0x03
line.long 0x00 "DC_LATCH1_TIME_NEG_L,Latch 1 Time Negative Edge Register L"
rgroup.long 0x9CC++0x03
line.long 0x00 "DC_LATCH1_TIME_NEG_H,Latch 1 Time Negative Edge Register H"
rgroup.long 0x9F0++0x03
line.long 0x00 "DC_ECAT_CNG_EV_TIME,Buffer Change Event Time Register"
hexmask.long 0x00 0.--31. 1. "ECATCHANGE,Local Time Indication"
rgroup.long 0x9F8++0x03
line.long 0x00 "DC_PDI_START_EV_TIME,PDI Buffer Start Event Time Register"
hexmask.long 0x00 0.--31. 1. "PDISTART,Local Time Indication"
rgroup.long 0x9FC++0x03
line.long 0x00 "DC_PDI_CNG_EV_TIME,PDI Buffer Change Event Time Register"
hexmask.long 0x00 0.--31. 1. "PDICHANGE,Local Time Indication"
rgroup.long 0xE00++0x03
line.long 0x00 "PRODUCT_ID_L,Product ID Register L"
rgroup.long 0xE04++0x03
line.long 0x00 "PRODUCT_ID_H,Product ID Register H"
rgroup.long 0xE08++0x03
line.long 0x00 "VENDOR_ID_L,Vendor ID Register L"
hexmask.long 0x00 0.--31. 1. "VENDORID,Vendor ID Indication"
tree.end
tree "ESC_INI (Initial Configuration for EtherCAT Slave Controller)"
base ad:0x80110200
group.long 0x00++0x03
line.long 0x00 "ECATOFFADR,EtherCAT PHY Offset Address Setting Register"
bitfld.long 0x00 0.--4. "OADD,PHY Offset Address Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x04++0x03
line.long 0x00 "ECATOPMOD,EtherCAT Operation Mode Register"
bitfld.long 0x00 0. "EEPROMSIZE,EEPROM Memory Size Specification" "0: 16 Kbits or less,1: 32 Kbits to 4 Mbits"
group.long 0x08++0x03
line.long 0x00 "ECATDBGC,EtherCAT Debug Control Register"
bitfld.long 0x00 4.--5. "TXSFT2,Set the delay time for ETH2_TXC of the EtherCAT" "0: 0 ns,1: 10 ns,2: 20 ns,3: 30 ns"
bitfld.long 0x00 2.--3. "TXSFT1,Set the delay time for ETH1_TXC of the EtherCAT" "0: 0 ns,1: 10 ns,2: 20 ns,3: 30 ns"
bitfld.long 0x00 0.--1. "TXSFT0,Set the delay time for ETH0_TXC of the EtherCAT" "0: 0 ns,1: 10 ns,2: 20 ns,3: 30 ns"
group.long 0x0C++0x03
line.long 0x00 "ECATTRGSEL,EtherCAT DC Latch Trigger Select Register"
bitfld.long 0x00 1. "TRGSEL1,Select DC Latch Trigger 1 for ESC" "0: Select LATCH1 input from ELC,1: Select LATCH1 input from external"
bitfld.long 0x00 0. "TRGSEL0,Select DC Latch Trigger 0 for ESC" "0: Select LATCH0 input from ELC,1: Select LATCH0 input from external"
tree.end
tree "ETHSS (Ethernet Subsystem)"
base ad:0x80110000
group.long 0x00++0x03
line.long 0x00 "PRCMD,Ethernet Protect Register"
group.long 0x08++0x03
line.long 0x00 "MODCTRL,Mode Control Register"
bitfld.long 0x00 0.--2. "SW_MODE,Media I/F connectionSW_MODE[2:0]Media I/FPort 0Port 1Port 2000bETHSW Port 0ETHSW Port 1ETHSW Port 2001bESC Port 0ESC Port 1GMAC Port010bESC Port 0ESC Port 1ETHSW Port 2011bESC Port 0ESC Port 1ESC Port 2100bETHSW Port 0ESC Port 1ESC Port.." "0,1,2,3,4,5,6,7"
group.long 0x0C++0x03
line.long 0x00 "PTPMCTRL,PTP Mode Control Register"
bitfld.long 0x00 16. "PTP_PLS_RSTn,Reset control for Pulse Generator (unit 0 - 3)" "0: Assert RESET,1: Release RESET"
bitfld.long 0x00 0. "PTP_MODE,Select the unit number of PTP Timer for GMAC and Pulse Generator (unit 0 - 3)" "0: Ethernet Switch Timer 0,1: Ethernet Switch Timer 1"
group.long 0x14++0x03
line.long 0x00 "PHYLNK,Ethernet PHY Link Mode Register"
bitfld.long 0x00 4.--6. "CATLNK,Specify the active level of the ESC_PHYLINKn signal using the EtherCAT interface" "0: Active-Low PHYLINK signal,1: Active-High PHYLINK signal,?..."
bitfld.long 0x00 0.--2. "SWLINK,Specify the active level of the ETHSW_PHYLINKn signal using the Ethernet switch interface" "0: Active-High PHYLINK signal,1: Active-Low PHYLINK signal,?..."
repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 )
group.long ($2+0x100)++0x03
line.long 0x00 "CONVCTRL$1,RGMII/RMII Converter"
rbitfld.long 0x00 14.--15. "RGMII_SPEED," "0: 2.5 MHz,1: 25 MHz,2: 125 MHz,3: Reserved"
rbitfld.long 0x00 13. "RGMII_DUPLEX," "0: Half-duplex,1: Full-duplex"
rbitfld.long 0x00 12. "RGMII_LINK," "0: Down,1: Up"
newline
bitfld.long 0x00 10. "RMII_CRS_MODE," "0: CRS | TX_EN,1: CRS | TX_EN | RX_DV"
bitfld.long 0x00 9. "RMII_RX_ER_EN," "0: RX_ER is always 0,1: RX_ER signal"
bitfld.long 0x00 8. "FULLD," "0: Half-duplex,1: Full-duplex"
newline
bitfld.long 0x00 0.--4. "CONV_MODE,Converter operation mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0x114++0x03
line.long 0x00 "CONVRST,RGMII/RMII Converter Reset Control Register"
bitfld.long 0x00 0.--2. "PHYIR," "0: Reset RGMII/RMII Converter,1: Activate RGMII/RMII Converter,?..."
group.long 0x304++0x03
line.long 0x00 "SWCTRL,Switch Core Control Register"
bitfld.long 0x00 17. "STRAP_HUB_ENB,Initialize switch port 0 and 1 (set during module reset of ETHSW)" "0: Port 0 and 1 stay uninitialized,1: Port 0 and 1 initialized"
bitfld.long 0x00 16. "STRAP_SX_ENB,Initialize switch after reset (set during module reset of ETHSW)" "0: Switch stay uninitialized,1: Switch initialized (line port)"
bitfld.long 0x00 4.--6. "SET1000,Port control to select use of 1000 Mbps" "0: Not 1000 Mbps,1: 1000 Mbps,?..."
newline
bitfld.long 0x00 0.--2. "SET10,Port control to select use of 10 Mbps" "0: Not 10 Mbps,1: 10 Mbps,?..."
group.long 0x308++0x03
line.long 0x00 "SWDUPC,Switch Core Duplex Mode Register"
bitfld.long 0x00 0.--2. "PHY_DUPLEX,Configure the MAC of each port for full-duplex or half-duplex operation" "0: Half-duplex,1: Full-duplex,?..."
group.long 0xC00++0x03
line.long 0x00 "CDCR,RGMII Clock Delay Control Register"
bitfld.long 0x00 3. "CLKINEN,Enable Phase shift mode for normal operation" "0: Disable,1: Enable"
bitfld.long 0x00 2. "OSCCLKEN,Enable Oscillation mode for calibration" "0: Disable,1: Enable"
bitfld.long 0x00 1. "TXDLYEN,Enable delay for ETH2_TXCLK" "0: Disable,1: Enable"
newline
bitfld.long 0x00 0. "RXDLYEN,Enable delay for ETH2_RXCLK" "0: Disable,1: Enable"
rgroup.long 0xC10++0x03
line.long 0x00 "RXFCNT,RGMII RX OSC Frequency Measurement Counter Register"
hexmask.long.word 0x00 0.--15. 1. "RXFCNT,Oscillation frequency measurement counter for ETH2_RXCLK delay"
rgroup.long 0xC14++0x03
line.long 0x00 "TXFCNT,RGMII TX OSC Frequency Measurement Counter Register"
hexmask.long.word 0x00 0.--15. 1. "TXFCNT,Oscillation frequency measurement counter for ETH2_TXCLK delay"
group.long 0xC18++0x03
line.long 0x00 "RXTAPSEL,RGMII RX TAP Selection Register"
hexmask.long.byte 0x00 0.--6. 1. "RXTAPSEL,TAP selection for ETH2_RXCLK delay (number of taps for 90 degree phase shift)"
group.long 0xC1C++0x03
line.long 0x00 "TXTAPSEL,RGMII TX TAP Selection Register"
hexmask.long.byte 0x00 0.--6. 1. "TXTAPSEL,TAP selection for ETH2_TXCLK delay (Number of taps for 90 degree phase shift)"
group.long 0xC20++0x03
line.long 0x00 "MIIMCR,MII Mode Control Register"
bitfld.long 0x00 0. "MIIM2MEN,Enable MAC-to-MAC MII Mode" "0: Disable,1: Enable"
tree.end
tree "ETHSW (Ethernet Switch)"
base ad:0x80120000
rgroup.long 0x00++0x03
line.long 0x00 "REVISION,Switch Core Version Register"
hexmask.long 0x00 0.--31. 1. "REV,Revision"
group.long 0x04++0x03
line.long 0x00 "SCRATCH,Scratch Register"
hexmask.long 0x00 0.--31. 1. "SCRATCH,The Scratch Register provides a memory location to test the register access"
group.long 0x08++0x03
line.long 0x00 "PORT_ENA,Port Enable Register"
bitfld.long 0x00 16.--19. "RXENA,Receive Enable Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "TXENA,Transmit Enable Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x0C++0x03
line.long 0x00 "UCAST_DEFAULT_MASK0,Unicast Default Mask Register 0"
bitfld.long 0x00 0.--3. "UCASTDM,Default Unicast Resolution" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x10++0x03
line.long 0x00 "VLAN_VERIFY,Verify VLAN Domain Register"
bitfld.long 0x00 16.--19. "VLANDISC,Discard Unknown" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "VLANVERI,Verify VLAN Domain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x14++0x03
line.long 0x00 "BCAST_DEFAULT_MASK0,Broadcast Default Mask Register 0"
bitfld.long 0x00 0.--3. "BCASTDM,Default Broadcast Resolution" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x18++0x03
line.long 0x00 "MCAST_DEFAULT_MASK0,Multicast Default Mask Register 0"
bitfld.long 0x00 0.--3. "MCASTDM,Default Multicast Resolution" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x1C++0x03
line.long 0x00 "INPUT_LEARN_BLOCK,Input Learning Block Register"
bitfld.long 0x00 16.--19. "LEARNDIS,Learning Disable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "BLOCKEN,Blocking Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x20++0x03
line.long 0x00 "MGMT_CONFIG,Management Configuration Register"
bitfld.long 0x00 16.--19. "PORTMASK,Portmask for transmission of management frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 13.--15. "PRIORITY,Priority to use for transmitted BPDU frames if non-zero" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "MGMT_DISC,This bit is the same as DISCARD (bit 7) but for the management port" "0,1"
newline
bitfld.long 0x00 8. "MGMT_EN,If set BPDU frames received at the management port are forwarded to the ports given in the portmask given in this register bypassing the normal forwarding decisions (except forced forwarding)" "0,1"
newline
bitfld.long 0x00 7. "DISCARD,If set BPDU frames are discarded always" "0,1"
newline
bitfld.long 0x00 6. "ENABLE,If set all Bridge Protocol Frames (BPDU) are forwarded exclusively to the management port specified in bits [3:0]" "0,1"
newline
bitfld.long 0x00 5. "MSG_TRANS,Set (latched) when a BPDU message is transmitted from the management port to any output port" "0,1"
newline
bitfld.long 0x00 0.--3. "PORT,The Port number of the port that should act as a management port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x24++0x03
line.long 0x00 "MODE_CONFIG,Mode Configuration Register"
bitfld.long 0x00 31. "STATSRESET,Reset Statistics Counters Command" "0,1"
newline
bitfld.long 0x00 8.--11. "CUT_THRU_EN,Port Cut through Support Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x28++0x03
line.long 0x00 "VLAN_IN_MODE,VLAN Input Manipulation Mode Register"
bitfld.long 0x00 6.--7. "P3VLANINMD,Port3 Define Behavior of VLAN Input Manipulation Function" "0: Mode 1,1: Mode 2,2: Mode 3,3: Mode 4"
newline
bitfld.long 0x00 4.--5. "P2VLANINMD,Port 2 Define Behavior of VLAN Input Manipulation Function" "0: Mode 1,1: Mode 2,2: Mode 3,3: Mode 4"
newline
bitfld.long 0x00 2.--3. "P1VLANINMD,Port 1 Define Behavior of VLAN Input Manipulation Function" "0: Mode 1,1: Mode 2,2: Mode 3,3: Mode 4"
newline
bitfld.long 0x00 0.--1. "P0VLANINMD,Port 0 Define Behavior of VLAN Input Manipulation Function" "0: Mode 1,1: Mode 2,2: Mode 3,3: Mode 4"
group.long 0x2C++0x03
line.long 0x00 "VLAN_OUT_MODE,VLAN Output Manipulation Mode Register"
bitfld.long 0x00 6.--7. "P3VLANOUTMD,Port 3 Define Behavior of VLAN Output Manipulation Function" "0: No output manipulation,1: Mode 1 Strip Mode,2: Mode 2 Tag Through,3: Mode 3 Transparent"
newline
bitfld.long 0x00 4.--5. "P2VLANOUTMD,Port 2 Define Behavior of VLAN Output Manipulation Function" "0: No output manipulation,1: Mode 1 Strip Mode,2: Mode 2 Tag Through,3: Mode 3 Transparent"
newline
bitfld.long 0x00 2.--3. "P1VLANOUTMD,Port 1 Define Behavior of VLAN Output Manipulation Function" "0: No output manipulation,1: Mode 1 Strip Mode,2: Mode 2 Tag Through,3: Mode 3 Transparent"
newline
bitfld.long 0x00 0.--1. "P0VLANOUTMD,Port 0 Define Behavior of VLAN Output Manipulation Function" "0: No output manipulation,1: Mode 1 Strip Mode,2: Mode 2 Tag Through,3: Mode 3 Transparent"
group.long 0x30++0x03
line.long 0x00 "VLAN_IN_MODE_ENA,VLAN Input Mode Enable Register"
bitfld.long 0x00 0.--3. "VLANINMDEN,Enable the input processing according to the VLAN_IN_MODE for a port (1 bit per port)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x34++0x03
line.long 0x00 "VLAN_TAG_ID,VLAN Tag ID Register"
hexmask.long.word 0x00 0.--15. 1. "VLANTAGID,The VLAN type field (TPID) value to expect to identify a VLAN tagged frame"
group.long 0x38++0x03
line.long 0x00 "BCAST_STORM_LIMIT,Broadcast Storm Protection Register"
hexmask.long.word 0x00 16.--31. 1. "BCASTLIMIT,Number of broadcast frames (-1) that can be accepted on a port during a timeout period"
newline
hexmask.long.word 0x00 0.--15. 1. "TMOUT,Timeout in steps of 65535 switch operating clock cycles"
group.long 0x3C++0x03
line.long 0x00 "MCAST_STORM_LIMIT,Multicast Storm Protection Register"
hexmask.long.word 0x00 16.--31. 1. "MCASTLIMIT,Number of multicast frames (-1) that can be accepted on a port during a timeout period"
group.long 0x40++0x03
line.long 0x00 "MIRROR_CONTROL,Port Mirroring Configuration Register"
bitfld.long 0x00 10. "EG_DA_MATCH,If set only frames transmitted on an egress port with a destination address matching the value programmed in MIRROR_EDST registers are mirrored" "0,1"
newline
bitfld.long 0x00 9. "EG_SA_MATCH,If set only frames transmitted on an egress port with a source address matching the value programmed in MIRROR_ESRC registers are mirrored" "0,1"
newline
bitfld.long 0x00 8. "ING_DA_MATCH,If set only frames received on an ingress port with a destination address matching the value programmed in MIRROR_IDST registers are mirrored" "0,1"
newline
bitfld.long 0x00 7. "ING_SA_MATCH,If set only frames received on an ingress port with a source address matching the value programmed in MIRROR_ISRC registers are mirrored" "0,1"
newline
bitfld.long 0x00 6. "EG_MAP_EN,If set the egress map is enabled (MIRROR_EG_MAP)" "0,1"
newline
bitfld.long 0x00 5. "ING_MAP_EN,If set the ingress map is enabled (MIRROR_ING_MAP)" "0,1"
newline
bitfld.long 0x00 4. "MIRROR_EN," "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 0.--1. "PORT,The port number of the port that acts as the mirror port and receives all mirrored frames" "0,1,2,3"
group.long 0x44++0x03
line.long 0x00 "MIRROR_EG_MAP,Port Mirroring Egress Port Definition Register"
bitfld.long 0x00 0.--3. "EMAP,Port Mirroring Egress Port Definitions" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "MIRROR_ING_MAP,Port Mirroring Ingress Port Definition Register"
bitfld.long 0x00 0.--3. "IMAP,Port Mirroring Ingress Port Definitions" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x4C++0x03
line.long 0x00 "MIRROR_ISRC_0,Ingress Source MAC Address for Mirror Filtering Register 0"
hexmask.long 0x00 0.--31. 1. "ISRC,Ingress Source MAC Address for Mirror Filtering"
group.long 0x50++0x03
line.long 0x00 "MIRROR_ISRC_1,Ingress Source MAC Address for Mirror Filtering Register 1"
hexmask.long.word 0x00 0.--15. 1. "ISRC,Ingress Source MAC Address for Mirror Filtering"
group.long 0x54++0x03
line.long 0x00 "MIRROR_IDST_0,Ingress Destination MAC Address for Mirror Filtering Register 0"
hexmask.long 0x00 0.--31. 1. "IDST,Ingress Destination MAC Address for Mirror Filtering"
group.long 0x58++0x03
line.long 0x00 "MIRROR_IDST_1,Ingress Destination MAC Address for Mirror Filtering Register 1"
hexmask.long.word 0x00 0.--15. 1. "IDST,Ingress Destination MAC Address for Mirror Filtering"
group.long 0x5C++0x03
line.long 0x00 "MIRROR_ESRC_0,Egress Source MAC Address for Mirror Filtering Register 0"
hexmask.long 0x00 0.--31. 1. "ESRC,Egress Source MAC Address for Mirror Filtering"
group.long 0x60++0x03
line.long 0x00 "MIRROR_ESRC_1,Egress Source MAC Address for Mirror Filtering Register 1"
hexmask.long.word 0x00 0.--15. 1. "ESRC,Egress Source MAC Address for Mirror Filtering"
group.long 0x64++0x03
line.long 0x00 "MIRROR_EDST_0,Egress Destination MAC Address for Mirror Filtering Register 0"
hexmask.long 0x00 0.--31. 1. "EDST,Egress Destination MAC Address for Mirror Filtering"
group.long 0x68++0x03
line.long 0x00 "MIRROR_EDST_1,Egress Destination MAC Address for Mirror Filtering Register 1"
hexmask.long.word 0x00 0.--15. 1. "EDST,Egress Destination MAC Address for Mirror Filtering"
group.long 0x6C++0x03
line.long 0x00 "MIRROR_CNT,Mirror Filtering Count Value Register"
hexmask.long.byte 0x00 0.--7. 1. "CNT,Count Value for Mirror Filtering"
group.long 0x70++0x03
line.long 0x00 "UCAST_DEFAULT_MASK1,Unicast Default Mask Register 1"
bitfld.long 0x00 0.--3. "UCASTDM1,Default Unicast Resolution Mask 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x74++0x03
line.long 0x00 "BCAST_DEFAULT_MASK1,Broadcast Default Mask Register 1"
bitfld.long 0x00 0.--3. "BCASTDM1,Default Broadcast Resolution Mask 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x78++0x03
line.long 0x00 "MCAST_DEFAULT_MASK1,Multicast Default Mask Register 1"
bitfld.long 0x00 0.--3. "MCASTDM1,Default Multicast Resolution Mask 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x7C++0x03
line.long 0x00 "PORT_XCAST_MASK_SEL,Port Mask Select Register"
bitfld.long 0x00 0.--3. "MSEL,Mask Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x88++0x03
line.long 0x00 "QMGR_ST_MINCELLS,Minimum Memory Cell Statistics Register"
hexmask.long.word 0x00 0.--10. 1. "STMINCELLS,Minimum Free Cell Indication"
group.long 0x94++0x03
line.long 0x00 "QMGR_RED_MIN4,RED Minimum Threshold Register"
hexmask.long 0x00 0.--31. 1. "CFGRED_MINTH4,Random Early Detection (RED) Minimum Threshold for Queues 0 to 3"
group.long 0x98++0x03
line.long 0x00 "QMGR_RED_MAX4,RED Maximum Threshold Register"
hexmask.long 0x00 0.--31. 1. "CFGRED_MAXTH4,Random Early Detection (RED) Maximum Threshold for Queues 0 to 3"
group.long 0x9C++0x03
line.long 0x00 "QMGR_RED_CONFIG,RED Configuration Register"
bitfld.long 0x00 8. "GACTIVITY_EN,Enable Averaging on Global Switch Activity (when this bit is 1) or on port local activity (when this bit is 0) only" "0,1"
newline
bitfld.long 0x00 0.--3. "QUEUE_RED_EN,Enable Random Early Detection (RED) (when this bit is 1) or Tail Drop (when this bit is 0) congestion management for a queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xA0++0x03
line.long 0x00 "IMC_STATUS,Input Memory Controller Status Register"
bitfld.long 0x00 27. "MEM_FULL,Latched Indication that Memory is or was Full" "0,1"
newline
bitfld.long 0x00 26. "DE_INIT,Asserts during Memory Initialization (deallocation module)" "0,1"
newline
bitfld.long 0x00 25. "DE_ERR,Deallocation Error" "0,1"
newline
bitfld.long 0x00 24. "CF_ERR,Cell Factory Empty Error" "0,1"
newline
hexmask.long.tbyte 0x00 0.--23. 1. "CELLS_AVAILABLE,Total number of memory cells (128-byte units) available in the shared memory (real time)"
rgroup.long 0xA4++0x03
line.long 0x00 "IMC_ERR_FULL,Input Port Memory Full and Truncation Indicator Register"
bitfld.long 0x00 16.--19. "IPC_ERR_TRUNC,Memory became full while a frame was received and was partly written into memory" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "IPC_ERR_FULL,Memory was full at start of a frame reception" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xA8++0x03
line.long 0x00 "IMC_ERR_IFACE,Input Port Memory Error Indicator Register"
bitfld.long 0x00 16.--19. "WBUF_OVF,Error indicating an overflow in the input write buffer to the memory controller (a small decoupling FIFO at every MAC RX)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "IPC_ERR_IFACE,Error indication on memory input (receive from MAC) that a frame has been truncated and discarded" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xAC++0x03
line.long 0x00 "IMC_ERR_QOFLOW,Output Port Queue Overflow Indicator Register"
bitfld.long 0x00 0.--3. "OP_ERR,A frame cannot be stored in an output queue of the port as the queue FIFO overflowed (write occurred into full fifo)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xB0++0x03
line.long 0x00 "IMC_CONFIG,Input Memory Controller Configuration Register"
bitfld.long 0x00 5. "CTFL_EMPTY_MD,When this bit is set to 0 a frame received in Cut-Through mode that cannot allocate an entry in the CTFL is forwarded as store and forward" "0,1"
newline
bitfld.long 0x00 2.--4. "SPEED_HIPRI_THR,High-Priority Speed Threshold" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 1. "RSV_ENA,Enable Memory Reservations to Operate" "0,1"
newline
bitfld.long 0x00 0. "WFQ_EN,Enable weighted fair queuing (when this bit is 1) or strict priority (when this bit is 0 default) output queue scheduling" "0,1"
rgroup.long 0xB4++0x03
line.long 0x00 "IMC_ERR_ALLOC,Input Port Error Indicator Register"
bitfld.long 0x00 16.--19. "DISC_LATE,Per port discard indication due to lateness in the priority resolution" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "DISC_FULL,Per port discard indication due to memory pool going empty" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0xC0)++0x03
line.long 0x00 "GPARSER$1,[n + 1]th Parser of 1st Block"
bitfld.long 0x00 30. "CMP_MASK_OR,Use the MASK_VAL2[7:0] bits as a 2nd compare value" "0,1"
newline
bitfld.long 0x00 29. "OFFSET_PLUS2,Repeats the comparison at offset + 2 if the comparison at offset failed" "0,1"
newline
bitfld.long 0x00 28. "CMP16,When set MASK_VAL2[7:0] is used as a value to perform a 16-bit compare" "0,1"
newline
bitfld.long 0x00 27. "IPPROTOCOL,When set the compare value is compared with the protocol field found within the IP header for both IPv4 and IPv6 frames" "0,1"
newline
bitfld.long 0x00 26. "IPDATA,When set the offset starts with the first byte following an IP header if an IP frame is processed" "0,1"
newline
bitfld.long 0x00 25. "SKIPVLAN,When set any optional VLAN tags found in the frame are skipped and the parser starts operating at the first byte following any VLAN tags" "0,1"
newline
bitfld.long 0x00 24. "VALID,Indicate that this entry is valid (when this bit is 1) and should be used" "0,1"
newline
bitfld.long 0x00 23. "OFFSET_DA,When set the offset starts counting from the first byte of the MAC destination address" "0,1"
newline
bitfld.long 0x00 16.--21. "OFFSET,An offset in bytes where to find the data for comparison within the frame" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.byte 0x00 8.--15. 1. "COMPARE_VAL,The value to compare the frame data with at the given offset"
newline
abitfld.long 0x00 0.--7. "MASK_VAL2,Mask for single byte compares or 2nd compare value (if bit 30 = 1) or least significant bits of a 16-bit compare value (if bit 28 = 1)" "0x1C=28: 1). When used as a mask (bit 28,0x1E=30: 0 0) the data from the frame is ANDed.."
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0xD0)++0x03
line.long 0x00 "GARITH$1,Snoop Configuration for Arithmetic [n + 1]th Stage of 1st Block"
bitfld.long 0x00 20.--21. "SNP_MD,Snoop Mode" "0: Disabled no snooping occurs (forward normally),1: Forward to designated management port only,2: Forward normally and copy to management port,3: Discard the frame"
newline
bitfld.long 0x00 17. "RESULT_INV,Result Invert" "0: The output is used directly,1: The output of this stage is inverted"
newline
bitfld.long 0x00 16. "OP,Operation" "0: AND all selected inputs,1: OR all selected inputs"
newline
bitfld.long 0x00 14. "SEL_ARITH2,Select Arithmetic Stage 2" "0,1"
newline
bitfld.long 0x00 13. "SEL_ARITH1,Select Arithmetic Stage 1" "0,1"
newline
bitfld.long 0x00 12. "SEL_ARITH0,Select Arithmetic Stage 0" "0,1"
newline
bitfld.long 0x00 8.--11. "SEL_MATCH,Select Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "NOT_INP,Not Input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 4. (strings "" "" "" "" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0xE0)++0x03
line.long 0x00 "GPARSER$1,[n - 3]th Parser of 2nd Block $1"
bitfld.long 0x00 30. "CMP_MASK_OR,Use MASK_VAL2[7:0] as a second compare value" "0,1"
newline
bitfld.long 0x00 29. "OFFSET_PLUS2,Repeats the comparison at offset + 2 if the comparison at offset failed" "0,1"
newline
bitfld.long 0x00 28. "CMP16,When set MASK_VAL2[7:0] is used as a value to perform a 16-bit compare" "0,1"
newline
bitfld.long 0x00 27. "IPPROTOCOL,When set the compare value is compared with the protocol field located within the IP header for both IPv4 and IPv6 frames" "0,1"
newline
bitfld.long 0x00 26. "IPDATA,When set the offset starts with the first byte following an IP header if an IP frame is processed" "0,1"
newline
bitfld.long 0x00 25. "SKIPVLAN,When set any optional VLAN tags found in the frame are skipped and the parser starts operating at the first byte following any VLAN tags" "0,1"
newline
bitfld.long 0x00 24. "VALID,Indicates that this entry is valid (when this bit is 1) and should be used" "0,1"
newline
bitfld.long 0x00 23. "OFFSET_DA,When set the offset starts counting from the first byte of the MAC destination address" "0,1"
newline
bitfld.long 0x00 16.--21. "OFFSET,An offset in bytes to locate the data for comparison within the frame" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.byte 0x00 8.--15. 1. "COMPARE_VAL,The value to compare the frame data with at the given offset"
newline
abitfld.long 0x00 0.--7. "MASK_VAL2,Mask for single byte compares or 2nd compare value (if bit 30 = 1) or least significant bits of a 16-bit compare value (if bit 28 = 1)" "0x1C=28: 1). When used as a mask (bit 28,0x1E=30: 0 0) the data from the frame is ANDed.."
repeat.end
repeat 4. (strings "" "" "" "" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0xF0)++0x03
line.long 0x00 "GARITH$1,Snoop Configuration for Arithmetic [n  3]th Stage of 2nd Block $1"
bitfld.long 0x00 20.--21. "SNP_MD,Snoop Mode" "0: Disabled no snooping occurs (forward normally),1: Forward to designated management port only,2: Forward normally and copy to management port,3: Discard the frame"
newline
bitfld.long 0x00 17. "RESULT_INV,Result Invert" "0: The output is used directly,1: The output of this stage is inverted"
newline
bitfld.long 0x00 16. "OP,Operation" "0: AND all selected inputs,1: OR all selected inputs"
newline
bitfld.long 0x00 14. "SEL_ARITH2,Select Arithmetic Stage 2" "0,1"
newline
bitfld.long 0x00 13. "SEL_ARITH1,Select Arithmetic Stage 1" "0,1"
newline
bitfld.long 0x00 12. "SEL_ARITH0,Select Arithmetic Stage 0" "0,1"
newline
bitfld.long 0x00 8.--11. "SEL_MATCH,Select Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "NOT_INP,Not Input" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x100)++0x03
line.long 0x00 "VLAN_PRIORITY$1,VLAN Priority Register"
bitfld.long 0x00 21.--23. "PRIORITY7,Priority 7 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 18.--20. "PRIORITY6,Priority 6 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 15.--17. "PRIORITY5,Priority 5 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PRIORITY4,Priority 4 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PRIORITY3,Priority 3 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 6.--8. "PRIORITY2,Priority 2 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3.--5. "PRIORITY1,Priority 1 Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "PRIORITY0,Priority 0 Setting" "0,1,2,3,4,5,6,7"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x140)++0x03
line.long 0x00 "IP_PRIORITY$1,IP Priority Register"
bitfld.long 0x00 31. "READ,COS Table Operation Switching" "0: Write the priority information to the COS table,1: Does not write the priority information to.."
newline
bitfld.long 0x00 9.--11. "PRIORITY,COS Table Priority" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8. "IPV6SELECT,IPv6 COS Table Selection" "0: The IPv4 table is accessed,1: The IPv6 table is accessed"
newline
hexmask.long.byte 0x00 0.--7. 1. "ADDRESS,COS Table Address Specifying"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x00 )
group.long ($2+0x180)++0x03
line.long 0x00 "PRIORITY_CFG$1,Priority Configuration Register"
hexmask.long.tbyte 0x00 8.--31. 1. "PCP_REMAP,PCP Remapping function"
newline
bitfld.long 0x00 7. "PCP_REMAP_DIS,Disables PCP remapping when set to 1" "0,1"
newline
bitfld.long 0x00 4.--6. "DEFAULTPRI,Default Priority Enable Setting" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3. "TYPE_EN,TYPE Based Priority Enable" "0: Type fields are ignored,1: The type/length field of the frame (following.."
newline
bitfld.long 0x00 2. "MACEN,MAC Based Priority Enable" "0: MAC priority is ignored,1: Priority information found within the MAC.."
newline
bitfld.long 0x00 1. "IPEN,IP Priority Enable" "0: IP priority is not used and IP DiffServ/COS..,1: Priority in the switch is determined using.."
newline
bitfld.long 0x00 0. "VLANEN,VLAN Priority Enable" "0: VLAN priority is not used,1: Priority in the switch is determined using.."
repeat.end
repeat 2. (strings "1" "2" )(list 0x00 0x04 )
group.long ($2+0x1B8)++0x03
line.long 0x00 "PRIORITY_TYPE$1,Priority Type Register $1"
bitfld.long 0x00 17.--19. "PRIORITY,The priority value to use if a match occurs" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16. "VALID,If set indicates this register contains valid data" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. "TYPEVAL,Type Priority"
repeat.end
group.long 0x1C0++0x03
line.long 0x00 "MGMT_ADDR0_lo,Lower MAC Address 0 for Bridge Protocol Frame Register"
hexmask.long 0x00 0.--31. 1. "BPDU_DST,Additional MAC address defining a Bridge Protocol Frame (BPDU) in addition to the commonly-known addresses"
group.long 0x1C4++0x03
line.long 0x00 "MGMT_ADDR0_hi,Higher MAC Address 0 for Bridge Protocol Frame Register"
hexmask.long.byte 0x00 16.--23. 1. "MASK,8-bit mask for comparing the last byte of the MAC address"
newline
hexmask.long.word 0x00 0.--15. 1. "BPDU_DST,Bits [7:0] is 5th byte bits [15:8] is 6th (last) byte"
group.long 0x1C8++0x03
line.long 0x00 "MGMT_ADDR1_lo,Lower MAC Address 1 for Bridge Protocol Frame Register"
hexmask.long 0x00 0.--31. 1. "BPDU_DST,Additional MAC address defining a Bridge Protocol Frame (BPDU) in addition to the commonly-known addresses"
group.long 0x1CC++0x03
line.long 0x00 "MGMT_ADDR1_hi,Higher MAC Address 1 for Bridge Protocol Frame Register"
hexmask.long.byte 0x00 16.--23. 1. "MASK,8-bit mask for comparing the last byte of the MAC address"
newline
hexmask.long.word 0x00 0.--15. 1. "BPDU_DST,Bits [7:0] is 5th byte bits [15:8] is 6th (last) byte"
group.long 0x1D0++0x03
line.long 0x00 "MGMT_ADDR2_lo,Lower MAC Address 2 for Bridge Protocol Frame Register"
hexmask.long 0x00 0.--31. 1. "BPDU_DST,Additional MAC address defining a Bridge Protocol Frame (BPDU) in addition to the commonly-known addresses"
group.long 0x1D4++0x03
line.long 0x00 "MGMT_ADDR2_hi,Higher MAC Address 2 for Bridge Protocol Frame Register"
hexmask.long.byte 0x00 16.--23. 1. "MASK,8-bit mask for comparing the last byte of the MAC address"
newline
hexmask.long.word 0x00 0.--15. 1. "BPDU_DST,Bits [7:0] is 5th byte bits [15:8] is 6th (last) byte"
group.long 0x1D8++0x03
line.long 0x00 "MGMT_ADDR3_lo,Lower MAC Address 3 for Bridge Protocol Frame Register"
hexmask.long 0x00 0.--31. 1. "BPDU_DST,Additional MAC address defining a Bridge Protocol Frame (BPDU) in addition to the commonly-known addresses"
group.long 0x1DC++0x03
line.long 0x00 "MGMT_ADDR3_hi,Higher MAC Address 3 for Bridge Protocol Frame Register"
hexmask.long.byte 0x00 16.--23. 1. "MASK,8-bit mask for comparing the last byte of the MAC address"
newline
hexmask.long.word 0x00 0.--15. 1. "BPDU_DST,Bits [7:0] is 5th byte bits [15:8] is 6th (last) byte"
group.long 0x1E0++0x03
line.long 0x00 "SRCFLT_ENA,MAC Source Address Filtering Enable Register"
bitfld.long 0x00 16.--19. "DSTENA,Per-Destination Port Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--2. "SRCENA,Per-Source Port Enable" "0,1,2,3,4,5,6,7"
group.long 0x1E4++0x03
line.long 0x00 "SRCFLT_CONTROL,MAC Source Address Filtering Control Register"
hexmask.long.word 0x00 16.--31. 1. "WATCHDOG_TIME,Defines the watchdog expire time in milliseconds"
newline
bitfld.long 0x00 1. "WATCHDOG_ENA,When set to 1 a watchdog is enabled" "0,1"
newline
bitfld.long 0x00 0. "MGMT_FWD,Management Forward Enable" "0,1"
group.long 0x1E8++0x03
line.long 0x00 "SRCFLT_MACADDR_LO,Lower MAC Filtering Address Register"
hexmask.long 0x00 0.--31. 1. "SRCFLT_MACADDR,MAC address to use in source filtering"
group.long 0x1EC++0x03
line.long 0x00 "SRCFLT_MACADDR_HI,Higher MAC Filtering Address Register"
hexmask.long.word 0x00 16.--31. 1. "MASK,The mask to apply to the last 16 bits of the MAC address"
newline
hexmask.long.word 0x00 0.--15. 1. "SRCFLT_MACADDR,MAC address to use in source filtering"
group.long 0x1FC++0x03
line.long 0x00 "PHY_FILTER_CFG,Debounce Filter Configuration Register"
bitfld.long 0x00 16.--18. "FLT_EN,Per-port Enable Mask" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 0.--8. 1. "FILTER_DURATION,This is the amount of time to wait after the last phy_link (ETHSW_PHYLINKn: n = port) transition from 0 to 1 to acknowledge the link-up condition"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x200)++0x03
line.long 0x00 "SYSTEM_TAGINFO$1,One VLAN ID Field"
hexmask.long.word 0x00 0.--15. 1. "SYSVLANINFO,System VLAN Info (prio/cfi/vid) for Port n"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x240)++0x03
line.long 0x00 "AUTH_PORT$1,Port"
bitfld.long 0x00 16.--19. "GUEST_MASK,Destination port mask with all ports that are allowed to receive non-EAPOL frames from this port while it is unauthorized and guest (GUEST_EN) is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "EAPOL_PNUM,EAPOL Port Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 11. "ACHG_UNAUTH,Automatic Port Change to Unauthorized" "0,1"
newline
bitfld.long 0x00 5. "EAPOL_UC_EN,EAPOL Unicast Enable" "0,1"
newline
bitfld.long 0x00 4. "BPDU_EN,BPDU Enable" "0,1"
newline
bitfld.long 0x00 3. "GUEST_EN,Guest Enable" "0,1"
newline
bitfld.long 0x00 2. "EAPOL_EN,EAPOL Enable" "0,1"
newline
bitfld.long 0x00 1. "CTRL_BOTH,Controlled Both" "0: The port operates in Controlled Directions..,1: The port operates in Controlled Directions.."
newline
bitfld.long 0x00 0. "AUTH,Authorized" "0: The port is unauthorized restricting..,1: The port is in the authorized state and.."
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x280)++0x03
line.long 0x00 "VLAN_RES_TABLE$1,32 VLAN Domain Entries"
bitfld.long 0x00 30. "WT_PRTMSK,Write Port Mask" "0,1"
newline
bitfld.long 0x00 29. "WT_TAGMSK,Write TAG Mask" "0,1"
newline
bitfld.long 0x00 28. "RD_TAGMSK,Read TAG Mask" "0: The port mask is returned,1: The tagged bit mask is returned"
newline
hexmask.long.word 0x00 4.--15. 1. "VLANID,The 12-bit VLAN identifier (VLAN ID) of the entry"
newline
bitfld.long 0x00 0.--3. "PORTMASK,When this bit is set to 1 it defines a port as a member of the VLAN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C )
group.long ($2+0x2C0)++0x03
line.long 0x00 "VLAN_RES_TABLE$1,32 VLAN Domain Entries"
bitfld.long 0x00 30. "WT_PRTMSK,Write Port Mask" "0,1"
newline
bitfld.long 0x00 29. "WT_TAGMSK,Write TAG Mask" "0,1"
newline
bitfld.long 0x00 28. "RD_TAGMSK,Read TAG Mask" "0: The port mask is returned,1: The tagged bit mask is returned"
newline
hexmask.long.word 0x00 4.--15. 1. "VLANID,The 12-bit VLAN identifier (VLAN ID) of the entry"
newline
bitfld.long 0x00 0.--3. "PORTMASK,When this bit is set to 1 it defines a port as a member of the VLAN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
rgroup.long 0x300++0x03
line.long 0x00 "TOTAL_DISC,Discarded Frame Total Number Register"
hexmask.long 0x00 0.--31. 1. "TOTAL_DISC,Total number of incoming frames accepted by MAC RX but discarded in the switch"
rgroup.long 0x304++0x03
line.long 0x00 "TOTAL_BYT_DISC,Discarded Frame Total Bytes Register"
hexmask.long 0x00 0.--31. 1. "TOTAL_BYT_DISC,Sum of bytes of frames counted in TOTAL_DISC"
rgroup.long 0x308++0x03
line.long 0x00 "TOTAL_FRM,Processed Frame Total Number Register"
hexmask.long 0x00 0.--31. 1. "TOTAL_FRM,Total number of incoming frames processed by the switch"
rgroup.long 0x30C++0x03
line.long 0x00 "TOTAL_BYT_FRM,Processed Frame Total Bytes Register"
hexmask.long 0x00 0.--31. 1. "TOTAL_BYT_FRM,Sum of bytes of frames counted in TOTAL_FRM"
group.long 0x340++0x03
line.long 0x00 "IALK_CONTROL,IA Lookup Function Enable Register"
bitfld.long 0x00 16.--19. "CT_ENA,Per-port Cut-Through Mode Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "IA_LKUP_ENA,Per-port Enable to the IA Lookup Table" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x344++0x03
line.long 0x00 "IALK_OUI,IA Frames MAC Address OUI Register"
hexmask.long.tbyte 0x00 0.--23. 1. "IALK_OUI,IA Frames MAC Address OUI"
group.long 0x348++0x03
line.long 0x00 "IALK_ID_MIN,Minimum Value ID MAC Address Register"
hexmask.long.tbyte 0x00 0.--23. 1. "IALK_ID_MIN,Minimum value for the 24-bit ID in the MAC address"
group.long 0x34C++0x03
line.long 0x00 "IALK_ID_MAX,Maximum Value ID MAC Address Register"
hexmask.long.tbyte 0x00 0.--23. 1. "IALK_ID_MAX,Maximum value for the 24-bit ID in the MAC address"
group.long 0x350++0x03
line.long 0x00 "IALK_ID_SUB,Offset Value ID MAC Address Register"
hexmask.long.tbyte 0x00 0.--23. 1. "IALK_ID_SUB,Offset value to subtract from the 24-bit ID in the MAC address"
group.long 0x354++0x03
line.long 0x00 "IALK_ID_CONFIG,Configures Lookup Response Unknown IDs Register"
bitfld.long 0x00 16.--19. "INVLD_ID_FLOOD_MASK,Forwarding mask used for frames whose ID is invalid" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 7. "INVLD_ID_PRIO_VLD,Indicates if the priority in INVLD_ID_PRIO is valid" "0,1"
newline
bitfld.long 0x00 4.--6. "INVLD_ID_PRIO,Priority to use for found responses of an invalid ID" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 1. "INVLD_ID_LRN_ENA,Setting this bit to 1 allows automatic learning into the L2 FDB for frames with unknown IDs" "0,1"
newline
bitfld.long 0x00 0. "INVLD_ID_FLOOD,Setting this bit to 1 causes the IA table to return a found response for frames whose ID lies outside the ID range defined by [IA_LK_MAX:IA_LK_MIN] using INVLD_ID_FLOOD_MASK[3:0] bits" "0,1"
group.long 0x358++0x03
line.long 0x00 "IALK_VLAN_CONFIG,Configure Lookup Response Unknown VLAN Register"
bitfld.long 0x00 16.--19. "UNKWN_VLAN_FLOOD_MASK,Forwarding mask used for frames with an unknown VLAN ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--10. "VLANS_ENABLED,Configures the logical geometry of the IA table by specifying the number of distinct VLAN IDs enabled" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "UNKWN_VLAN_PRIO_VLD,Indicates if the priority in UNKWN_VLAN_PRIO[2:0] is valid" "0,1"
newline
bitfld.long 0x00 4.--6. "UNKWN_VLAN_PRIO,Priority to use for found responses for an unknown VLAN" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 1. "UNKWN_VLAN_LRN_ENA,Setting this bit to 1 allows automatic learning into the L2 FDB for frames with unknown VLANs" "0,1"
newline
bitfld.long 0x00 0. "UNKWN_VLAN_FLOOD,When this bit is set to 1 a frame matching the OUI and with a valid ID but having a VLAN ID not matching any of the enabled values in IALK_VLANIDn causes the IA table to return a found response using the forwarding mask in.." "0,1"
group.long 0x35C++0x03
line.long 0x00 "IALK_TBL_ADDR,IA Lookup Database Address Register"
bitfld.long 0x00 28.--31. "AINC,Auto-Increment Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--12. 1. "ADDR,Defines the address to write to or read from the IA Lookup table"
group.long 0x360++0x03
line.long 0x00 "IALK_TBL_DATA,IA Lookup Database Data Register"
bitfld.long 0x00 1.--4. "FWD_MASK,Forwarding mask used for lookups that hit the entry and when VALID is set to 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "VALID,Indicates whether the entry indicated by ADDR is valid or not" "0,1"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x380)++0x03
line.long 0x00 "IALK_VLANID$1,IA Lookup VLANIDn Register"
bitfld.long 0x00 31. "VLANID_PRIO_VLD,Indicates if the priority in VLANID_PRIO[2:0] is valid" "0,1"
newline
bitfld.long 0x00 28.--30. "VLANID_PRIO,Priority to use for found responses" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "VLANID_FLOOD_MASK,Flooding mask to be used for frames matching this VLAN ID but with an invalid entry in the IA table" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 13. "VLANID_LRN_ENA,Configures whether automatic learning in the L2 FDB is allowed for frames matching VLAN ID" "0,1"
newline
bitfld.long 0x00 12. "VLANID_ENA,Enables this VLAN ID" "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VLANID,Configure the VLAN ID to be used for VLAN n (n: IALK_VLAN_CONFIG.VLANS_ENABLED)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
rgroup.long ($2+0x3C0)++0x03
line.long 0x00 "IMC_QLEVEL_P$1,Port"
bitfld.long 0x00 28.--31. "QUEUE7,A 4-bit value per queue indicating the number of frames stored in queue 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 24.--27. "QUEUE6,A 4-bit value per queue indicating the number of frames stored in queue 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "QUEUE5,A 4-bit value per queue indicating the number of frames stored in queue 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "QUEUE4,A 4-bit value per queue indicating the number of frames stored in queue 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "QUEUE3,A 4-bit value per queue indicating the number of frames stored in queue 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "QUEUE2,A 4-bit value per queue indicating the number of frames stored in queue 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "QUEUE1,A 4-bit value per queue indicating the number of frames stored in queue 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "QUEUE0,A 4-bit value per queue indicating the number of frames stored in queue 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x400++0x03
line.long 0x00 "LK_CTRL,Learning/Lookup Function Global Configuration Register"
bitfld.long 0x00 16.--19. "DISC_UNK_SRC,Discard Unknown Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 7. "IND_VLAN,Enable Independent VLAN Learning" "0,1"
newline
bitfld.long 0x00 6. "CLRTBL,Clear Table" "0,1"
newline
bitfld.long 0x00 4. "DISC_UNK_DEST,Discard Unknown Destination" "0,1"
newline
bitfld.long 0x00 3. "ALW_MGRT,Allow Migration" "0,1"
newline
bitfld.long 0x00 2. "AGING_EN,Aging Enable" "0,1"
newline
bitfld.long 0x00 1. "LEARN_EN,Learning Enable" "0,1"
newline
bitfld.long 0x00 0. "LKUP_EN,Lookup Controller Enable" "0,1"
group.long 0x404++0x03
line.long 0x00 "LK_STATUS,Status Bits and Table Overflow Counter Register"
bitfld.long 0x00 31. "LRNEVNT,Learn Event" "0,1"
newline
hexmask.long.word 0x00 16.--29. 1. "OVERFLOW,Counts number of table overflows that occurred (a new address was learned but the table had no storage and an older entry was deleted)"
newline
hexmask.long.word 0x00 0.--15. 1. "AGEADDR,Address the aging process will inspect when the aging timer expires next time"
group.long 0x408++0x03
line.long 0x00 "LK_ADDR_CTRL,Address Table Transaction Control and Read/Write Address"
rbitfld.long 0x00 31. "BUSY,Transaction Busy Indication" "0,1"
newline
bitfld.long 0x00 30. "DEL_PORT,When set to 1 scans the complete table for valid dynamic entries that contain the given ports in their destination port mask and deletes the ports or the complete entry" "0: port 0 bit,1: port 1 and so on)"
newline
bitfld.long 0x00 29. "CLEAR,When set to 1 writes all 0s to the entry selected by the given address set in ADDR_MSK[11:0]" "0,1"
newline
rbitfld.long 0x00 28. "LOOKUP,When set to 1 perform a lookup of the MAC address given in LK_DATA_LO/HI/HI2" "0,1"
newline
bitfld.long 0x00 27. "WAIT_COMP,When set to 1 instructs to stall the processor bus until the transaction is completed" "0,1"
newline
bitfld.long 0x00 26. "READ,When set to 1 perform a single read transaction" "0,1"
newline
bitfld.long 0x00 25. "WRITE,When set to 1 perform a single write transaction" "0,1"
newline
bitfld.long 0x00 24. "GETLASTNEW,When set to 1 retrieves the last source address that was not found in the table and places it into LK_DATA_LO/HI/HI2" "0,1"
newline
bitfld.long 0x00 23. "CLR_STATIC,When set to 1 scans the complete table for valid static entries and deletes them (writes entry with all 0s)" "0,1"
newline
bitfld.long 0x00 22. "CLR_DYNAMIC,When set to 1 scans the complete table for valid dynamic entries and deletes them (writes entry with all 0s)" "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "ADDR_MSK,Memory address for read and write transactions"
group.long 0x40C++0x03
line.long 0x00 "LK_DATA_LO,Lower 32-Bit Data of Lookup Memory Entry"
hexmask.long 0x00 0.--31. 1. "MEMDATA,Memory Data [31:0]"
group.long 0x410++0x03
line.long 0x00 "LK_DATA_HI,Higher 25-Bit Data of Lookup Memory Entry"
hexmask.long 0x00 0.--24. 1. "MEMDATA,Memory Data [56:32]"
group.long 0x414++0x03
line.long 0x00 "LK_DATA_HI2,Higher2 12-Bit Data of Lookup Memory Entry"
hexmask.long.word 0x00 8.--19. 1. "MEMDATA,Memory Data [68:57]"
group.long 0x418++0x03
line.long 0x00 "LK_LEARNCOUNT,Learned Address Count Register"
bitfld.long 0x00 30.--31. "WRITE_MD,These bits define how the LEARNCOUNT value is modified when writing into the register" "0: Sets LEARNCOUNT to given value,1: Increments the LEARNCOUNT value by 1 (atomic),2: Decrements the LEARNCOUNT value by 1 (atomic),3: Reserved write has no effect on LEARNCOUNT"
newline
hexmask.long.word 0x00 0.--12. 1. "LEARNCOUNT,Number of Learned Addresses"
group.long 0x41C++0x03
line.long 0x00 "LK_AGETIME,Period of the Aging Timer"
hexmask.long.tbyte 0x00 0.--23. 1. "AGETIME,24-bit Timer Value"
group.long 0x480++0x03
line.long 0x00 "MGMT_TAG_CONFIG,Management Tag Configuration Register"
hexmask.long.word 0x00 16.--31. 1. "TAGFIELD,The value of the tag that is found in the first Type/Length field of the frame to identify that the control information is present within a frame"
newline
bitfld.long 0x00 5. "TYPE2_EN,When set frames with a Type field that match the value in PRIORITY_TYPE2.TYPEVAL[15:0] have management tag inserted" "0,1"
newline
bitfld.long 0x00 4. "TYPE1_EN,When set frames with a Type field that match the value in PRIORITY_TYPE1.TYPEVAL[15:0] have management tag inserted" "0,1"
newline
bitfld.long 0x00 1. "AL_FRAMES,Enable Tag Insertion for All Frames" "0,1"
newline
bitfld.long 0x00 0. "ENABLE,Enable Management Tag Insertion Module" "0,1"
group.long 0x504++0x03
line.long 0x00 "TSM_CONFIG,Timestamping Control Module Configuration Register"
bitfld.long 0x00 16.--19. "IRQ_TX_EN,Per Port Transmit Timestamp Capture Interrupt Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--13. "IRQ_ATIME_OVER,Per-timer Trigger interrupt enable for the timer wrap (reached its maximum)" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "IRQ_EVT_PERIOD,Per-timer Trigger interrupt enable for the timer periodical event" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "IRQ_EVT_OFFSET,Per-timer Trigger interrupt enable for the timer offset event" "0,1,2,3"
newline
bitfld.long 0x00 2. "IRQ_TSFIFO_OVR,Trigger interrupt enable for Transmit Timestamp Capture Overflow event" "0,1"
newline
bitfld.long 0x00 1. "IRQ_TEST,Software controlled interrupt for testing purposes" "0,1"
newline
bitfld.long 0x00 0. "IRQ_EN,Final Interrupt enable" "0,1"
group.long 0x508++0x03
line.long 0x00 "TSM_IRQ_STAT_ACK,Interrupt Status/Acknowledge Register"
bitfld.long 0x00 16.--19. "IRQ_TX,Per Port Transmit Timestamp Capture Interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--13. "IRQ_ATIME_OVER,Per-timer Overflow Interrupt Pending Status" "0,1,2,3"
newline
bitfld.long 0x00 8.--9. "IRQ_EVT_PERIOD,Per-timer Periodical Interrupt Pending Status" "0,1,2,3"
newline
bitfld.long 0x00 4.--5. "IRQ_EVT_OFFSET,Per-timer Offset Interrupt Pending Status" "0,1,2,3"
newline
rbitfld.long 0x00 2. "IRQ_TSFIFO_OVR,Transmit Timestamp Capture Overflow Interrupt Pending Status" "0,1"
newline
bitfld.long 0x00 1. "IRQ_TEST,Test Interrupt Pending Status" "0,1"
newline
rbitfld.long 0x00 0. "IRQ_STAT,Interrupt Pending Status" "0,1"
group.long 0x50C++0x03
line.long 0x00 "PTP_DOMAIN,Domain Number of PTP Frame"
hexmask.long.byte 0x00 8.--15. 1. "DOMAIN1,DomainNumber to Match Against for Timer 1"
newline
hexmask.long.byte 0x00 0.--7. 1. "DOMAIN0,DomainNumber to Match Against for Timer 0"
group.long 0x540++0x03
line.long 0x00 "PEERDELAY_P0_T0,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 0"
group.long 0x550++0x03
line.long 0x00 "PEERDELAY_P1_T0,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 0"
group.long 0x560++0x03
line.long 0x00 "PEERDELAY_P2_T0,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 0"
group.long 0x570++0x03
line.long 0x00 "PEERDELAY_P3_T0,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 0"
group.long 0x544++0x03
line.long 0x00 "PEERDELAY_P0_T1,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 1"
group.long 0x554++0x03
line.long 0x00 "PEERDELAY_P1_T1,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 1"
group.long 0x564++0x03
line.long 0x00 "PEERDELAY_P2_T1,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 1"
group.long 0x574++0x03
line.long 0x00 "PEERDELAY_P3_T1,Port"
hexmask.long 0x00 0.--29. 1. "PEERDELAY,Peer Delay Value Determined at the Port n for Timer 1"
group.long 0x5C0++0x03
line.long 0x00 "TS_FIFO_STATUS,Transmit Timestamp FIFO Status Register"
bitfld.long 0x00 16.--19. "FF_OVR,Per-port indication that a timestamp cannot be written to the FIFO because of the FIFO being full" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 0.--3. "FF_VALID,Per-port indication that a valid timestamp is available in the corresponding FIFO of the port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x5C4++0x03
line.long 0x00 "TS_FIFO_READ_CTRL,Transmit Timestamp FIFO Read Control Register"
hexmask.long.byte 0x00 8.--14. 1. "TS_ID,When TS_VALID is 1 TS_ID indicates the ID specified by the application through the management tag control information if present"
newline
rbitfld.long 0x00 6. "TS_SEL,When TS_VALID is 1 TS_SEL indicates the timer used for the read timestamp" "0,1"
newline
rbitfld.long 0x00 4. "TS_VALID,When reading from this register this bit is 1 if the FIFO indicated by PORT_NUM contained valid data" "0,1"
newline
bitfld.long 0x00 0.--1. "PORT_NUM,Port Number to Read from" "0,1,2,3"
rgroup.long 0x5C8++0x03
line.long 0x00 "TS_FIFO_READ_TIMESTAMP,32-bit Timestamp Value Read from FIFO"
hexmask.long 0x00 0.--31. 1. "TIMESTAMP,32-bit timestamp value read from the FIFO"
group.long 0x600++0x03
line.long 0x00 "INT_CONFIG,Interrupt Enable Configuration Register"
bitfld.long 0x00 31. "PATTERN_INT,Enable Interrupt for RX Pattern Matcher" "0,1"
newline
bitfld.long 0x00 30. "TDMA_INT,Enable Interrupt for TDMA scheduler" "0,1"
newline
bitfld.long 0x00 29. "TSM_INT,Enable Interrupt for TSM (Timer Timestamping)" "0,1"
newline
bitfld.long 0x00 28. "SRCFLT_WD_INT,MAC Address Source Filtering Watchdog" "0,1"
newline
bitfld.long 0x00 27. "EFP_INT,Enable Interrupt for Extended Frame Parser" "0,1"
newline
bitfld.long 0x00 16.--18. "IRQ_MAC_EEE,Per Line Port MAC interrupt" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--10. "IRQ_LINK,Per Line Port Phy Link Change Interrupt Enable" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "HUB_INT,Enable Interrupt for HUB" "0,1"
newline
bitfld.long 0x00 6. "PRP_INT,Enable Interrupt for PRP" "0,1"
newline
bitfld.long 0x00 5. "DLR_INT,Enable Interrupt for DLR" "0,1"
newline
bitfld.long 0x00 4. "IRQ_TEST,When set an interrupt is triggered immediately" "0,1"
newline
bitfld.long 0x00 3. "LK_NEW_SRC,Enable Interrupt for New Source Address" "0,1"
newline
bitfld.long 0x00 1. "MDIO1,Enable Interrupt on Transaction Complete from MDIO Controller" "0,1"
newline
bitfld.long 0x00 0. "IRQ_EN,Interrupt Global Enable" "0,1"
group.long 0x604++0x03
line.long 0x00 "INT_STAT_ACK,Interrupt Status/ACK Register"
rbitfld.long 0x00 31. "PATTERN_INT,Interrupt Pending Status from RX Pattern Matcher Module" "0,1"
newline
rbitfld.long 0x00 30. "TDMA_INT,Interrupt Pending Status from TDMA Scheduler" "0,1"
newline
rbitfld.long 0x00 29. "TSM_INT,Interrupt Pending Interrupt Indication from TSM (Timestamping) module" "0,1"
newline
bitfld.long 0x00 28. "SRCFLT_WD_INT,Interrupt Pending Status for MAC Source Filtering Watchdog" "0,1"
newline
bitfld.long 0x00 27. "EFP_INT,Interrupt from Extended Frame Parser" "0,1"
newline
bitfld.long 0x00 16.--18. "IRQ_MAC_EEE,Interrupt Pending Status per Line Port MAC Interrupt" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--10. "IRQ_LINK,Interrupt Pending per Line Port Phy Link Change Interrupt" "0,1,2,3,4,5,6,7"
newline
rbitfld.long 0x00 7. "HUB_INT,Interrupt Pending Status from Hub Module" "0,1"
newline
rbitfld.long 0x00 6. "PRP_INT,Interrupt Pending Status from PRP Module" "0,1"
newline
rbitfld.long 0x00 5. "DLR_INT,Interrupt Pending Status from DLR Module" "0,1"
newline
rbitfld.long 0x00 4. "IRQ_TEST,Interrupt Status for IRQ_TEST" "0,1"
newline
bitfld.long 0x00 3. "LK_NEW_SRC,Latched Interrupt Status for LK_NEW_SRC" "0,1"
newline
bitfld.long 0x00 1. "MDIO1,Latched Interrupt Status for MDIO1" "0,1"
newline
rbitfld.long 0x00 0. "IRQ_PEND,Interrupt Pending Status" "0,1"
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x680)++0x03
line.long 0x00 "ATIME_CTRL$1,Timer"
bitfld.long 0x00 12. "CAPTURE_ALL,Capture All Timers Value (Command Bit)" "0,1"
newline
bitfld.long 0x00 11. "CAPTURE,Capture Time Value (Command Bit)" "0,1"
newline
bitfld.long 0x00 9. "RESTART,Resets the Timer to Zero (Command Bit)" "0,1"
newline
bitfld.long 0x00 5. "EVT_PERIOD_RST,Reset Timer on Periodical Event" "0,1"
newline
bitfld.long 0x00 4. "EVT_PERIOD_ENA,Enable Periodical Event" "0,1"
newline
bitfld.long 0x00 2. "EVT_OFFSET_ENA,Enable Offset Event" "0,1"
newline
bitfld.long 0x00 1. "ONE_SHOT,Avoid timer wrap around" "0,1"
newline
bitfld.long 0x00 0. "ENABLE," "0,1"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x684)++0x03
line.long 0x00 "ATIME$1,Timer"
hexmask.long 0x00 0.--31. 1. "TIMER_VAL,Timer Value"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x688)++0x03
line.long 0x00 "ATIME_OFFSET$1,Timer"
hexmask.long 0x00 0.--31. 1. "OFFSET,Value used for performing offset corrections without changing the drift correction"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x68C)++0x03
line.long 0x00 "ATIME_EVT_PERIOD$1,Timer"
hexmask.long 0x00 0.--31. 1. "PERIOD,Value for generating periodic events"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x690)++0x03
line.long 0x00 "ATIME_CORR$1,Timer"
hexmask.long 0x00 0.--30. 1. "CORR_PERIOD,Correction Period"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x694)++0x03
line.long 0x00 "ATIME_INC$1,Timer"
hexmask.long.byte 0x00 16.--22. 1. "OFFS_CORR_INC,Offset Correction Increment Value"
newline
hexmask.long.byte 0x00 8.--14. 1. "CORR_INC,Correction Increment Value"
newline
hexmask.long.byte 0x00 0.--6. 1. "CLK_PERIOD,Clock Period of the Timestamping Clock (125 MHz) in nanoseconds"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x698)++0x03
line.long 0x00 "ATIME_SEC$1,Timer"
hexmask.long 0x00 0.--31. 1. "SEC_TIME,Seconds Time Value"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x69C)++0x03
line.long 0x00 "ATIME_OFFS_CORR$1,Timer"
hexmask.long 0x00 0.--31. 1. "OFFS_CORR_CNT,Offset Correction Counter"
repeat.end
group.long 0x700++0x03
line.long 0x00 "MDIO_CFG_STATUS,MDIO Configuration and Status Register"
hexmask.long.word 0x00 7.--15. 1. "CLKDIV,MDIO Clock Divisor"
newline
bitfld.long 0x00 5. "DISPREAM,Disable Preamble" "0: Enable Preamble,1: Disable Preamble"
newline
bitfld.long 0x00 2.--4. "HOLD,MDIO Hold Time Setting" "0: 1 PCLKM clock cycle (default),1: 3 PCLKM clock cycles,2: 5 PCLKM clock cycles,3: 7 PCLKM clock cycles,4: 9 PCLKM clock cycles,5: 11 PCLKM clock cycles,6: 13 PCLKM clock cycles,7: 15 PCLKM clock cycles"
newline
rbitfld.long 0x00 1. "READERR,MDIO Read Error" "0,1"
newline
rbitfld.long 0x00 0. "BUSY,MDIO Busy" "0,1"
group.long 0x704++0x03
line.long 0x00 "MDIO_COMMAND,MDIO PHY Command Register"
bitfld.long 0x00 15. "TRANINIT,If set to 1 a read transaction is initiated" "0,1"
newline
bitfld.long 0x00 5.--9. "PHYADDR,PHY Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "REGADDR,Register Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x708++0x03
line.long 0x00 "MDIO_DATA,MDIO Data Register"
hexmask.long.word 0x00 0.--15. 1. "MDIO_DATA,"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x800)++0x03
line.long 0x00 "REV_P$1,Port"
hexmask.long 0x00 0.--31. 1. "REV,MAC Core Revision"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x808)++0x03
line.long 0x00 "COMMAND_CONFIG_P$1,Port"
bitfld.long 0x00 30. "TIMER_SEL,Selects the default timer to use for timestamping operations on transmit and on receive" "0: Use timer 0,1: Use timer 1"
newline
bitfld.long 0x00 27. "TX_TRUNCATE," "0,1"
newline
bitfld.long 0x00 26. "EFPI_SELECT," "0: EFP disable,1: EFP enable"
newline
bitfld.long 0x00 25. "ENA_10,This bit has no effect except PHYSPEED bit of STATUS_Pn register" "0,1"
newline
bitfld.long 0x00 24. "NO_LGTH_CHK,Payload Length Check Disable" "0,1"
newline
bitfld.long 0x00 23. "CNTL_FRM_ENA,MAC Control Frame Enable" "0,1"
newline
bitfld.long 0x00 13. "SW_RESET,Self Clearing Reset Command Bit" "0,1"
newline
bitfld.long 0x00 11. "TX_CRC_APPEND,Enable CRC Append on Transmit" "0,1"
newline
bitfld.long 0x00 10. "HD_ENA,Enable auto full/half-duplex operation (set to 1) or full-duplex only (set to 0)" "0,1"
newline
rbitfld.long 0x00 9. "TX_ADDR_INS,Non writable bit fixed to 0 always" "0,1"
newline
bitfld.long 0x00 8. "PAUSE_IGNORE,Ignore Pause Frame Quanta" "0,1"
newline
rbitfld.long 0x00 7. "PAUSE_FWD,Terminate/Forward Pause Frames" "0,1"
newline
rbitfld.long 0x00 5. "PAD_EN,Enable/Disable Frame Padding Remove on Receive" "0,1"
newline
rbitfld.long 0x00 4. "PROMIS_EN,Enable/Disable MAC Promiscuous Operation" "0,1"
newline
bitfld.long 0x00 3. "ETH_SPEED,Operation Mode Definition" "0: 10/100 Megabit mode,1: 1 Gigabit mode"
newline
bitfld.long 0x00 2. "TDMA_PREBUF_DIS,When set to 1 the MAC does not request a new frame from the IMC until the current frame is completed" "0,1"
newline
bitfld.long 0x00 1. "RX_ENA,Enable/Disable MAC Receive Path" "0,1"
newline
bitfld.long 0x00 0. "TX_ENA,Enable/Disable MAC Transmit Path" "0,1"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x80C)++0x03
line.long 0x00 "MAC_ADDR_0_P$1,Port"
hexmask.long 0x00 0.--31. 1. "MAC_ADDR,The first 4 bytes of the MAC address of the port"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x810)++0x03
line.long 0x00 "MAC_ADDR_1_P$1,Port"
hexmask.long.word 0x00 0.--15. 1. "MAC_ADDR,The last 2 bytes of the MAC address of the port"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x814)++0x03
line.long 0x00 "FRM_LENGTH_P$1,Port"
hexmask.long.word 0x00 0.--13. 1. "FRM_LENGTH,Maximum Frame Length"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x818)++0x03
line.long 0x00 "PAUSE_QUANT_P$1,Port"
hexmask.long.word 0x00 0.--15. 1. "PAUSE_QUANT,Pause Quanta"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x81C)++0x03
line.long 0x00 "MAC_LINK_QTRIG_P$1,Port"
bitfld.long 0x00 31. "ENABLE,Write to 1 to enable the Link Queue Trigger feature" "0,1"
newline
bitfld.long 0x00 30. "MODE,When set to 0 only a single Link_Status frame is generated" "0,1"
newline
bitfld.long 0x00 29. "DLR_MODE,When set to 0 the DLR state machine is ignored" "0,1"
newline
bitfld.long 0x00 28. "TRIGGERED,When MODE is set to 1 TRIGGERED indicates whether a frame was transmitted" "0,1"
newline
hexmask.long.byte 0x00 16.--23. 1. "QUEUE_MASK,1-bit per queue indicating from which queues a frame is transmitted from the ports indicated by PORT_MASK"
newline
bitfld.long 0x00 0.--3. "PORT_MASK,Per-port Bit Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x830)++0x03
line.long 0x00 "PTPCLOCKIDENTITY1_P$1,Port"
hexmask.long.byte 0x00 24.--31. 1. "CLK_IDENTITY3,23 portIdentity.ClockIdentity[3]"
newline
hexmask.long.byte 0x00 16.--23. 1. "CLK_IDENTITY2,22 portIdentity.ClockIdentity[2]"
newline
hexmask.long.byte 0x00 8.--15. 1. "CLK_IDENTITY1,21 portIdentity.ClockIdentity[1]"
newline
hexmask.long.byte 0x00 0.--7. 1. "CLK_IDENTITY0,20 portIdentity.ClockIdentity[0]"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x834)++0x03
line.long 0x00 "PTPCLOCKIDENTITY2_P$1,Port"
hexmask.long.byte 0x00 24.--31. 1. "CLK_IDENTITY7,27 portIdentity.ClockIdentity[7]"
newline
hexmask.long.byte 0x00 16.--23. 1. "CLK_IDENTITY6,26 portIdentity.ClockIdentity[6]"
newline
hexmask.long.byte 0x00 8.--15. 1. "CLK_IDENTITY5,25 portIdentity.ClockIdentity[5]"
newline
hexmask.long.byte 0x00 0.--7. 1. "CLK_IDENTITY4,24 portIdentity.ClockIdentity[4]"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x838)++0x03
line.long 0x00 "PTPAUTORESPONSE_P$1,Port"
hexmask.long.byte 0x00 24.--31. 1. "PORTNUM0,28 portIdentity.PortNumber[0] (msb)"
newline
hexmask.long.byte 0x00 16.--23. 1. "PORTNUM1,29 portIdentity.PortNumber[1] (lsb)"
newline
bitfld.long 0x00 1. "D_TIMER,Default timer to use for auto-response generation" "0: Use timer 0,1: Use timer 1"
newline
bitfld.long 0x00 0. "ARSP_EN,Auto Response Enable" "0,1"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x840)++0x03
line.long 0x00 "STATUS_P$1,Port"
rbitfld.long 0x00 6.--8. "BR_VERIF_ST,Indicates the current status of the verification according to clause 30.14.1.2 of the 802.3br specification" "0: Unknown (during reset),1: Initial (when preemption is disabled),2: Verifying,3: Succeeded,4: Failed,5: Disabled (if preempt verification is disabled),?..."
newline
bitfld.long 0x00 5. "LK_DST_ERR,Indicates that the L2 destination lookup process failed to complete in time before the next frame was received at the port" "0,1"
newline
bitfld.long 0x00 4. "TX_UNDFLW,Indicates that the transmit MAC underflow" "0,1"
newline
rbitfld.long 0x00 3. "PHYDUPLEX,Duplex status from PHY interface" "0: half-duplex,1: full-duplex"
newline
rbitfld.long 0x00 2. "PHYLINK,Link status from PHY interface" "0: link down,1: link up"
newline
rbitfld.long 0x00 0.--1. "PHYSPEED,Currently Active PHY Interface Speed" "0: 10 Mbps,1: 100 Mbps,2: 1 Gbps,3: Reserved"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x844)++0x03
line.long 0x00 "TX_IPG_LENGTH_P$1,Port"
bitfld.long 0x00 16.--20. "MINRTC3GAP," "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--4. "TX_IPG_LENGTH,Define transmit interpacket gap in octets" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x848)++0x03
line.long 0x00 "EEE_CTL_STAT_P$1,Port"
rbitfld.long 0x00 20. "STLH_LPI_IND,Status (latched high) of Received LPI (ST_LPI_IND)" "0,1"
newline
rbitfld.long 0x00 18. "STLH_TXBUSY,Status (latched high) if the MAC is/was Transmitting" "0,1"
newline
rbitfld.long 0x00 17. "STLH_LPI_TXHOLD,Status (latched high) of Internal LPI_TXHOLD to the MAC" "0,1"
newline
rbitfld.long 0x00 16. "STLH_LPI_REQ,Status (latched high) of Internal LPI_REQ to the MAC" "0,1"
newline
rbitfld.long 0x00 12. "ST_LPI_IND,Status (real time) of Received LPI" "0,1"
newline
rbitfld.long 0x00 11. "ST_TXAVAIL,Status (real time) if the MAC transmit FIFO has data available for transmission" "0,1"
newline
rbitfld.long 0x00 10. "ST_TXBUSY,Status (real time) if the MAC is currently transmitting" "0,1"
newline
rbitfld.long 0x00 9. "ST_LPI_TXHOLD,Status (real time) of Internal LPI_TXHOLD to the MAC" "0,1"
newline
rbitfld.long 0x00 8. "ST_LPI_REQ,Status (real time) of Internal LPI_REQ to the MAC" "0,1"
newline
bitfld.long 0x00 2. "LPI_TXHOLD,MAC Transmission Hold" "0,1"
newline
bitfld.long 0x00 1. "LPI_REQ,Request LPI Transmission when MAC Becomes Idle" "0,1"
newline
bitfld.long 0x00 0. "EEE_AUTO,EEE Automatic Mode of Operation" "0,1"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x84C)++0x03
line.long 0x00 "EEE_IDLE_TIME_P$1,Port"
hexmask.long 0x00 0.--31. 1. "EEE_IDLE_TIME,Time (1) the transmitter must be idle before transmission of LPI begins"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x850)++0x03
line.long 0x00 "EEE_TWSYS_TIME_P$1,Port"
hexmask.long 0x00 0.--31. 1. "EEE_WKUP_TIME,Time (1) after PHY wakeup until the MAC is allowed to begin transmitting the first frame again"
repeat.end
group.long 0x854++0x03
line.long 0x00 "IDLE_SLOPE_Pn,Port n MAC Traffic Shaper Bandwidth Control (n = 0 to 3)"
hexmask.long.word 0x00 0.--10. 1. "IDLE_SLOPE,Traffic Shaper Bandwidth Control"
group.long 0x858++0x03
line.long 0x00 "CT_DELAY_Pn,Port n Cut-Through Delay Indication Register (n = 0 to 2)"
hexmask.long.word 0x00 0.--8. 1. "CT_DELAY,Delay Value in 400 ns / 40 ns / 8 ns increments (frequency of the MII PHY interface)"
repeat 3. (strings "0" "1" "2" )(list 0x00 0x400 0x800 )
group.long ($2+0x85C)++0x03
line.long 0x00 "BR_CONTROL_P$1,Port"
bitfld.long 0x00 20. "RX_MCRC_INV,When set to 1 the 32-bit XOR mask used to calculate the mCRC for received frames is inverted" "0,1"
newline
bitfld.long 0x00 19. "TX_MCRC_INV,When set to 1 the 32-bit XOR mask used to calculate the mCRC for transmitted frames is inverted" "0,1"
newline
bitfld.long 0x00 18. "RX_STRICT_BR_CTL,When set to 1 strict checking of VERIFY and RESPONSE frames is enabled" "0,1"
newline
bitfld.long 0x00 17. "RX_BR_SMD_DIS,When set to 1 the receiver does not decode the 802.3br SMDs and assumes all frames are express frames" "0,1"
newline
bitfld.long 0x00 16. "RX_STRICT_PRE,When set to 1 the preamble is checked so all bytes except the SFD are 0x55" "0,1"
newline
hexmask.long.byte 0x00 8.--14. 1. "TX_VERIFY_TIME,Preemption verification timeout in milliseconds"
newline
bitfld.long 0x00 4.--5. "ADDFRAGSIZE,Minimum fragment size in increments of 64 bytes" "0,1,2,3"
newline
bitfld.long 0x00 2. "RESPONSE_DIS,When set to 1 prevents the MAC from responding to verify frames" "0,1"
newline
bitfld.long 0x00 1. "VERIFY_DIS,When set to 1 disables the verify process required for preemption operation" "0,1"
newline
bitfld.long 0x00 0. "PREEMPT_ENA,When set to 1 enables 802.3br Frame Preemption" "0,1"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x868)++0x03
line.long 0x00 "AFRAMESTRANSMITTEDOK_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXVALIDCOUNT,PORT n this field indicates the number of MAC Valid Transmitted including pause"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x86C)++0x03
line.long 0x00 "AFRAMESRECEIVEDOK_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXVALIDCOUNT,PORT n this field indicates the number of MAC Valid Received including pause"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x870)++0x03
line.long 0x00 "AFRAMECHECKSEQUENCEERRORS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "FCSERRCOUNT,PORT n this field indicates the number of MAC Valid Length except CRC error"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x874)++0x03
line.long 0x00 "AALIGNMENTERRORS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "ALGNERRCOUNT,PORT n this field indicates the number of MAC Odd Number of Nibbles (MII) Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x878)++0x03
line.long 0x00 "AOCTETSTRANSMITTEDOK_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXVALIDOCTETS,PORT n this field indicates the octets (the payload only) of MAC Valid Transmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x87C)++0x03
line.long 0x00 "AOCTETSRECEIVEDOK_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXVALIDOCTETS,PORT n this field indicates the octets (the payload only) of MAC Valid Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x880)++0x03
line.long 0x00 "ATXPAUSEMACCTRLFRAMES_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXPAUSECOUNT,PORT n this field indicates the number of MAC Valid Pause Transmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x884)++0x03
line.long 0x00 "ARXPAUSEMACCTRLFRAMES_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXPAUSECOUNT,PORT n this field indicates the number of MAC Valid Pause Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x888)++0x03
line.long 0x00 "IFINERRORS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "INERRCOUNT,PORT n this field indicates the number of MAC Any Error During Reception such as CRC Length PHY Error RX FIFO Overflow"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x88C)++0x03
line.long 0x00 "IFOUTERRORS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OUTERRCOUNT,PORT n this field indicates the number of MAC Frame Transmitted with PHY error"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x890)++0x03
line.long 0x00 "IFINUCASTPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXUCASTCOUNT,PORT n this field indicates the number of MAC Unicast Frame Valid Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x894)++0x03
line.long 0x00 "IFINMULTICASTPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXMCASTCOUNT,PORT n this field indicates the number of MAC Multicast Frame Valid Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x898)++0x03
line.long 0x00 "IFINBROADCASTPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXBCASTCOUNT,PORT n this field indicates the number of MAC Broadcast Frame Valid Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x89C)++0x03
line.long 0x00 "IFOUTDISCARDS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "DISCOBCOUNT,Not Applicable"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8A0)++0x03
line.long 0x00 "IFOUTUCASTPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXUCASTCOUNT,PORT n this field indicates the number of MAC Unicast Frame Valid Transmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8A4)++0x03
line.long 0x00 "IFOUTMULTICASTPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXMCASTCOUNT,PORT n this field indicates the number of MAC Multicast Frame Valid Transmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8A8)++0x03
line.long 0x00 "IFOUTBROADCASTPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXBCASTCOUNT,PORT n this field indicates the number of MAC Broadcast Frame Valid Transmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8AC)++0x03
line.long 0x00 "ETHERSTATSDROPEVENTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "DROPCOUNT,PORT n this field indicates the number of MAC RX FIFO Full at frame start"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8B0)++0x03
line.long 0x00 "ETHERSTATSOCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "ALLOCTETS,"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8B4)++0x03
line.long 0x00 "ETHERSTATSPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "ALLCOUNT,"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8B8)++0x03
line.long 0x00 "ETHERSTATSUNDERSIZEPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TOOSHRTCOUNT,PORT n this field indicates the number of MAC too Short Good CRC"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8BC)++0x03
line.long 0x00 "ETHERSTATSOVERSIZEPKTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TOOLONGCOUNT,PORT n this field indicates the number of MAC too Long Good CRC"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8C0)++0x03
line.long 0x00 "ETHERSTATSPKTS64OCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT64,PORT n this field indicates the number of MAC All Frames Good and Bad (Packet Size: 64 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8C4)++0x03
line.long 0x00 "ETHERSTATSPKTS65TO127OCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT65T127,PORT n this field indicates the number of MAC All Frames Good and Bad (Packet Size: 65 to 127 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8C8)++0x03
line.long 0x00 "ETHERSTATSPKTS128TO255OCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT128T255,PORT n this field indicates the number of MAC All Frames Good and Bad (Packet Size: 128 to 255 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8CC)++0x03
line.long 0x00 "ETHERSTATSPKTS256TO511OCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT256T511,PORT n this field indicates the number of MAC All Frames Good and Bad (Packet Size: 256 to 511 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8D0)++0x03
line.long 0x00 "ETHERSTATSPKTS512TO1023OCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT512T1023,PORT n this field indicates the number of MAC All Frames Good and Bad (Packet Size: 512 to 1023 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8D4)++0x03
line.long 0x00 "ETHERSTATSPKTS1024TO1518OCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT1024T1518,PORT n this field indicates the number of MAC All Frames Good and Bad (Packet Size: 1024 to 1518 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8D8)++0x03
line.long 0x00 "ETHERSTATSPKTS1519TOXOCTETS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "OCTCNT1519TX,PORT n this field indicates the number of MAC all Frames Good and Bad (Packet Size: over 1519 bytes)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8DC)++0x03
line.long 0x00 "ETHERSTATSJABBERS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "JABBERCOUNT,PORT n this field indicates the number of MAC too Long Bad CRC"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8E0)++0x03
line.long 0x00 "ETHERSTATSFRAGMENTS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "FRAGCOUNT,PORT n this field indicates the number of MAC too Short Bad CRC"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8E8)++0x03
line.long 0x00 "VLANRECEIVEDOK_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RXVLANTAGCNT,PORT n this field indicates the number of Good Frames with VLAN Tag Received"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8F4)++0x03
line.long 0x00 "VLANTRANSMITTEDOK_P$1,Port"
hexmask.long 0x00 0.--31. 1. "TXVLANTAGCNT,PORT n this field indicates the number of Good Frames with VLAN Tag Transmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x8F8)++0x03
line.long 0x00 "FRAMESRETRANSMITTED_P$1,Port"
hexmask.long 0x00 0.--31. 1. "RETXCOUNT,PORT n this field indicates the number of Transmitted Frames that experienced a collision and were retransmitted"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x900)++0x03
line.long 0x00 "STATS_HIWORD_P$1,Port"
hexmask.long 0x00 0.--31. 1. "STATS_HIWORD,The latched upper 32-bit of the 64 bits MAC Statistics Counter Last"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x904)++0x03
line.long 0x00 "STATS_CTRL_P$1,Port"
rbitfld.long 0x00 1. "CLRBUSY,Clear in Progress Indication" "0,1"
newline
bitfld.long 0x00 0. "CLRALL,Self Clearing Counter Initialize Command" "0,1"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x908)++0x03
line.long 0x00 "STATS_CLEAR_VALUELO_P$1,Port"
hexmask.long 0x00 0.--31. 1. "STATS_CLEAR_VALUELO,PORT n lower 32-bit of 64 bits value loaded into all counters when clearing all counters with STATS_CTRL_Pn.CLRALL command for test purposes"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
group.long ($2+0x90C)++0x03
line.long 0x00 "STATS_CLEAR_VALUEHI_P$1,Port"
hexmask.long 0x00 0.--31. 1. "STATS_CLEAR_VALUEHI,PORT n upper 32-bit of 64 bits value loaded into all counters when clearing all counters with STATS_CTRL_Pn.CLRALL command for test purposes"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x910)++0x03
line.long 0x00 "ADEFERRED_P$1,Port"
hexmask.long 0x00 0.--31. 1. "DEFERCOUNT,PORT n this field indicates the number of Frame Transmitted without collision but was deferred at begin"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x914)++0x03
line.long 0x00 "AMULTIPLECOLLISIONS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "COUNTAFTMLTCOLL,PORT n this field indicates the number of Good Frame Transmit after multiple collisions"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x918)++0x03
line.long 0x00 "ASINGLECOLLISIONS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "COUNTAFTSNGLCOLL,PORT n this field indicates the number of Good Frame Transmit after single collision"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x91C)++0x03
line.long 0x00 "ALATECOLLISIONS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "LATECOLLCOUNT,PORT n this field indicates the number of too Late Collision"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x920)++0x03
line.long 0x00 "AEXCESSIVECOLLISIONS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "EXCCOLLCOUNT,PORT n this field indicates the number of Frames Discarded due to 16 consecutive collisions"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x400 0x800 0xC00 )
rgroup.long ($2+0x924)++0x03
line.long 0x00 "ACARRIERSENSEERRORS_P$1,Port"
hexmask.long 0x00 0.--31. 1. "CSERRCOUNT,PORT n increments during Transmission without Collisions the PHY Carrier Sense Signal (RX_CRS) dropped or never asserted"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2000)++0x03
line.long 0x00 "P0_QSTMACU$1,Qci Stream Filter Table MAC Address Upper Part"
bitfld.long 0x00 16. "DASA,MAC address (MACA) select" "0: MACA is a source address,1: MACA is a destination address"
newline
hexmask.long.word 0x00 0.--15. 1. "MACA,Qci stream filter table MAC address[47:32]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2004)++0x03
line.long 0x00 "P0_QSTMACD$1,Qci Stream Filter Table MAC Address Downer Part"
hexmask.long 0x00 0.--31. 1. "MACA,Qci stream filter table MAC address[31:0]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2008)++0x03
line.long 0x00 "P0_QSTMAMU$1,Qci Stream Filter Table MAC Address Mask Upper Part"
hexmask.long.word 0x00 0.--15. 1. "MACAM,Qci stream filter table MAC address bit mask[47:32]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x200C)++0x03
line.long 0x00 "P0_QSTMAMD$1,Qci Stream Filter Table MAC Address Mask Downer Part"
hexmask.long 0x00 0.--31. 1. "MACAM,Qci stream filter table MAC address bit mask[31:0]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2010)++0x03
line.long 0x00 "P0_QSFTVL$1,Qci Stream Filter Table VLAN"
bitfld.long 0x00 16.--17. "TAGMD," "0: Un Tagged (the frame must be untagged to..,1: C-Tagged (the frame must be C-Tagged to match..,2: Reserved,3: Do not check VLAN Tag (VLAN Tag check is.."
newline
bitfld.long 0x00 13.--15. "PCP," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI," "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VLANID,"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2014)++0x03
line.long 0x00 "P0_QSFTVLM$1,Qci Stream Filter Table VLAN Mask"
bitfld.long 0x00 13.--15. "PCPM,Qci stream filter table VLAN PCP[2:0] bit mask" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEIM," "0: No bit mask,1: Bit mask (the bit value of the DEI is ignored.."
newline
hexmask.long.word 0x00 0.--11. 1. "VLANIDM,Qci stream filter table VLAN ID[11:0] bit mask"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2018)++0x03
line.long 0x00 "P0_QSFTBL$1,Qci Stream Filter Table SDU/Gate/Meter ID"
bitfld.long 0x00 28. "QSMSM,Qci stream MSDU mode" "0: No effect,1: When a frame is discard by MSDU over all.."
newline
bitfld.long 0x00 27. "MSDUE," "0: Check disable,1: Check enable"
newline
hexmask.long.word 0x00 16.--26. 1. "MSDU,Qci stream filter table max SDU size"
newline
bitfld.long 0x00 12. "MEIDV," "0: Meter Check disable,1: Meter Check enable"
newline
bitfld.long 0x00 8.--10. "MEID," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "GAIDV," "0: Gating Check disable,1: Gating Check enable"
newline
bitfld.long 0x00 4.--6. "GAID," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0. "QSTE," "0: Stream filter Table disable (All frame unmatch),1: Stream filter Table enable"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x201C)++0x03
line.long 0x00 "P0_QSMFC$1,Qci Stream Match Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QSMFC,Qci stream match packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x2020)++0x03
line.long 0x00 "P0_QMSPPC$1,Qci MSDU Passed Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMSPPC,Qci msdu passed packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x2024)++0x03
line.long 0x00 "P0_QMSRPC$1,Qci MSDU Reject Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMSRPC,Qci MSDU rejected packet count"
repeat.end
group.long 0x21E8++0x03
line.long 0x00 "P0_QSEIS,Qci Stream Filter Error Interrupt Status (SDU Oversize)"
hexmask.long.byte 0x00 0.--7. 1. "QSMOIS,MSDU oversize frames Interrupt status[s]"
group.long 0x25E8++0x03
line.long 0x00 "P1_QSEIS,Qci Stream Filter Error Interrupt Status (SDU Oversize)"
hexmask.long.byte 0x00 0.--7. 1. "QSMOIS,MSDU oversize frames Interrupt status[s]"
group.long 0x29E8++0x03
line.long 0x00 "P2_QSEIS,Qci Stream Filter Error Interrupt Status (SDU Oversize)"
hexmask.long.byte 0x00 0.--7. 1. "QSMOIS,MSDU oversize frames Interrupt status[s]"
group.long 0x21EC++0x03
line.long 0x00 "P0_QSEIE,Qci Stream Filter Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QSMOIE,MSDU oversize frames Interrupt Enable[s]"
group.long 0x25EC++0x03
line.long 0x00 "P1_QSEIE,Qci Stream Filter Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QSMOIE,MSDU oversize frames Interrupt Enable[s]"
group.long 0x29EC++0x03
line.long 0x00 "P2_QSEIE,Qci Stream Filter Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QSMOIE,MSDU oversize frames Interrupt Enable[s]"
wgroup.long 0x21F0++0x03
line.long 0x00 "P0_QSEID,Qci Stream Filter Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QSMOID,MSDU oversize frames Interrupt Disable[s]"
wgroup.long 0x25F0++0x03
line.long 0x00 "P1_QSEID,Qci Stream Filter Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QSMOID,MSDU oversize frames Interrupt Disable[s]"
wgroup.long 0x29F0++0x03
line.long 0x00 "P2_QSEID,Qci Stream Filter Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QSMOID,MSDU oversize frames Interrupt Disable[s]"
group.long 0x2200++0x03
line.long 0x00 "P0_QGMOD,Qci Gate Mode Register"
hexmask.long.byte 0x00 0.--7. 1. "QGMOD,Flow gate mode[g]"
group.long 0x2600++0x03
line.long 0x00 "P1_QGMOD,Qci Gate Mode Register"
hexmask.long.byte 0x00 0.--7. 1. "QGMOD,Flow gate mode[g]"
group.long 0x2A00++0x03
line.long 0x00 "P2_QGMOD,Qci Gate Mode Register"
hexmask.long.byte 0x00 0.--7. 1. "QGMOD,Flow gate mode[g]"
rgroup.long 0x2204++0x03
line.long 0x00 "P0_QGPPC,Qci Gate (All) Passed Packet Count Port"
hexmask.long.word 0x00 0.--15. 1. "QGPPC,Qci gate passed packet count"
rgroup.long 0x2604++0x03
line.long 0x00 "P1_QGPPC,Qci Gate (All) Passed Packet Count Port"
hexmask.long.word 0x00 0.--15. 1. "QGPPC,Qci gate passed packet count"
rgroup.long 0x2A04++0x03
line.long 0x00 "P2_QGPPC,Qci Gate (All) Passed Packet Count Port"
hexmask.long.word 0x00 0.--15. 1. "QGPPC,Qci gate passed packet count"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 )
rgroup.long ($2+0x2208)++0x03
line.long 0x00 "P0_QGDPC$1,Qci Gate"
hexmask.long.word 0x00 0.--15. 1. "QGDPC,Qci gate dropped packet count"
repeat.end
group.long 0x2244++0x03
line.long 0x00 "P0_QGEIS,Qci Gate Error Interrupt Status"
hexmask.long.byte 0x00 0.--7. 1. "QGMOIS,Gating error Interrupt status[g]"
group.long 0x2644++0x03
line.long 0x00 "P1_QGEIS,Qci Gate Error Interrupt Status"
hexmask.long.byte 0x00 0.--7. 1. "QGMOIS,Gating error Interrupt status[g]"
group.long 0x2A44++0x03
line.long 0x00 "P2_QGEIS,Qci Gate Error Interrupt Status"
hexmask.long.byte 0x00 0.--7. 1. "QGMOIS,Gating error Interrupt status[g]"
group.long 0x2248++0x03
line.long 0x00 "P0_QGEIE,Qci Gate Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QGMOIE,Gating error Interrupt Enable[g]"
group.long 0x2648++0x03
line.long 0x00 "P1_QGEIE,Qci Gate Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QGMOIE,Gating error Interrupt Enable[g]"
group.long 0x2A48++0x03
line.long 0x00 "P2_QGEIE,Qci Gate Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QGMOIE,Gating error Interrupt Enable[g]"
wgroup.long 0x224C++0x03
line.long 0x00 "P0_QGEID,Qci Gate Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QGMOID,Gating error Interrupt Disable[g]"
wgroup.long 0x264C++0x03
line.long 0x00 "P1_QGEID,Qci Gate Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QGMOID,Gating error Interrupt Disable[g]"
wgroup.long 0x2A4C++0x03
line.long 0x00 "P2_QGEID,Qci Gate Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QGMOID,Gating error Interrupt Disable[g]"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2250)++0x03
line.long 0x00 "P0_QMDESC$1,Qci Port n Flow Meter"
bitfld.long 0x00 2. "CF,Coupling flag" "0,1"
newline
bitfld.long 0x00 1. "MM,Flow meter mode" "0: No effect,1: When discard frame by Flow Meter all frames.."
newline
bitfld.long 0x00 0. "RFD,Red frame drop" "0: A red frame is not dropped,1: A red frame is dropped"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2254)++0x03
line.long 0x00 "P0_QMCBSC$1,Qci Meter CBS Configuration Port n Meter"
hexmask.long.tbyte 0x00 0.--17. 1. "CBS,CBS (Committed Burst Size)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2258)++0x03
line.long 0x00 "P0_QMCIRC$1,Qci Meter CIR Configuration n"
hexmask.long.tbyte 0x00 0.--16. 1. "CIR,CIR (Committed Information Rate)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
rgroup.long ($2+0x225C)++0x03
line.long 0x00 "P0_QMGPC$1,Qci Meter Green Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMGPC,Qci meter green packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
rgroup.long ($2+0x2260)++0x03
line.long 0x00 "P0_QMRPC$1,Qci Meter Red Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMRPC,Qci meter red packet count"
repeat.end
group.long 0x22F0++0x03
line.long 0x00 "P0_QMEC,Qci Meter Enable Configuration"
hexmask.long.byte 0x00 0.--7. 1. "ME,Enable meter[m]"
group.long 0x26F0++0x03
line.long 0x00 "P1_QMEC,Qci Meter Enable Configuration"
hexmask.long.byte 0x00 0.--7. 1. "ME,Enable meter[m]"
group.long 0x2AF0++0x03
line.long 0x00 "P2_QMEC,Qci Meter Enable Configuration"
hexmask.long.byte 0x00 0.--7. 1. "ME,Enable meter[m]"
group.long 0x22F4++0x03
line.long 0x00 "P0_QMEIS,Qci Meter Error Interrupt Status"
hexmask.long.byte 0x00 0.--7. 1. "QRFIS,Red frames Interrupt status[m]"
group.long 0x26F4++0x03
line.long 0x00 "P1_QMEIS,Qci Meter Error Interrupt Status"
hexmask.long.byte 0x00 0.--7. 1. "QRFIS,Red frames Interrupt status[m]"
group.long 0x2AF4++0x03
line.long 0x00 "P2_QMEIS,Qci Meter Error Interrupt Status"
hexmask.long.byte 0x00 0.--7. 1. "QRFIS,Red frames Interrupt status[m]"
group.long 0x22F8++0x03
line.long 0x00 "P0_QMEIE,Qci Meter Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QRFIE,Red frames Interrupt Enable[m]"
group.long 0x26F8++0x03
line.long 0x00 "P1_QMEIE,Qci Meter Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QRFIE,Red frames Interrupt Enable[m]"
group.long 0x2AF8++0x03
line.long 0x00 "P2_QMEIE,Qci Meter Error Interrupt Enable"
hexmask.long.byte 0x00 0.--7. 1. "QRFIE,Red frames Interrupt Enable[m]"
wgroup.long 0x22FC++0x03
line.long 0x00 "P0_QMEID,Qci Meter Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QRFID,Red frames Interrupt Disable[m]"
wgroup.long 0x26FC++0x03
line.long 0x00 "P1_QMEID,Qci Meter Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QRFID,Red frames Interrupt Disable[m]"
wgroup.long 0x2AFC++0x03
line.long 0x00 "P2_QMEID,Qci Meter Error Interrupt Disable"
hexmask.long.byte 0x00 0.--7. 1. "QRFID,Red frames Interrupt Disable[m]"
group.long 0x2300++0x03
line.long 0x00 "P0_PCP_REMAP,Port"
bitfld.long 0x00 21.--23. "PCP_REMAP7," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 18.--20. "PCP_REMAP6," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 15.--17. "PCP_REMAP5," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_REMAP4," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PCP_REMAP3," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 6.--8. "PCP_REMAP2," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3.--5. "PCP_REMAP1," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "PCP_REMAP0," "0,1,2,3,4,5,6,7"
group.long 0x2700++0x03
line.long 0x00 "P1_PCP_REMAP,Port"
bitfld.long 0x00 21.--23. "PCP_REMAP7," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 18.--20. "PCP_REMAP6," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 15.--17. "PCP_REMAP5," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_REMAP4," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PCP_REMAP3," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 6.--8. "PCP_REMAP2," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3.--5. "PCP_REMAP1," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "PCP_REMAP0," "0,1,2,3,4,5,6,7"
group.long 0x2B00++0x03
line.long 0x00 "P2_PCP_REMAP,Port"
bitfld.long 0x00 21.--23. "PCP_REMAP7," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 18.--20. "PCP_REMAP6," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 15.--17. "PCP_REMAP5," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_REMAP4," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "PCP_REMAP3," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 6.--8. "PCP_REMAP2," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 3.--5. "PCP_REMAP1," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "PCP_REMAP0," "0,1,2,3,4,5,6,7"
group.long 0x2304++0x03
line.long 0x00 "P0_VLAN_TAG,Port"
hexmask.long.word 0x00 16.--31. 1. "TPID,"
newline
bitfld.long 0x00 13.--15. "PCP," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI," "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,"
group.long 0x2704++0x03
line.long 0x00 "P1_VLAN_TAG,Port"
hexmask.long.word 0x00 16.--31. 1. "TPID,"
newline
bitfld.long 0x00 13.--15. "PCP," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI," "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,"
group.long 0x2B04++0x03
line.long 0x00 "P2_VLAN_TAG,Port"
hexmask.long.word 0x00 16.--31. 1. "TPID,"
newline
bitfld.long 0x00 13.--15. "PCP," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI," "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,"
group.long 0x2308++0x03
line.long 0x00 "P0_VLAN_MODE,Port"
bitfld.long 0x00 2.--3. "VICM,VLAN input verification mode" "0: Mode 0,1: Mode 1,2: Mode 2,3: Mode 3"
newline
bitfld.long 0x00 0.--1. "VITM,VLAN input tagging mode" "0: Disabled VLAN tag is neither added nor..,1: Single Tagging with Passthrough/ VLAN ID..,2: Single Tagging with Replace,3: Tag always"
group.long 0x2708++0x03
line.long 0x00 "P1_VLAN_MODE,Port"
bitfld.long 0x00 2.--3. "VICM,VLAN input verification mode" "0: Mode 0,1: Mode 1,2: Mode 2,3: Mode 3"
newline
bitfld.long 0x00 0.--1. "VITM,VLAN input tagging mode" "0: Disabled VLAN tag is neither added nor..,1: Single Tagging with Passthrough/ VLAN ID..,2: Single Tagging with Replace,3: Tag always"
group.long 0x2B08++0x03
line.long 0x00 "P2_VLAN_MODE,Port"
bitfld.long 0x00 2.--3. "VICM,VLAN input verification mode" "0: Mode 0,1: Mode 1,2: Mode 2,3: Mode 3"
newline
bitfld.long 0x00 0.--1. "VITM,VLAN input tagging mode" "0: Disabled VLAN tag is neither added nor..,1: Single Tagging with Passthrough/ VLAN ID..,2: Single Tagging with Replace,3: Tag always"
rgroup.long 0x230C++0x03
line.long 0x00 "P0_VIC_DROP_CNT,Port"
hexmask.long.word 0x00 0.--15. 1. "VIC_DROP_CNT,Port n VLAN ingress check drop frame count"
rgroup.long 0x270C++0x03
line.long 0x00 "P1_VIC_DROP_CNT,Port"
hexmask.long.word 0x00 0.--15. 1. "VIC_DROP_CNT,Port n VLAN ingress check drop frame count"
rgroup.long 0x2B0C++0x03
line.long 0x00 "P2_VIC_DROP_CNT,Port"
hexmask.long.word 0x00 0.--15. 1. "VIC_DROP_CNT,Port n VLAN ingress check drop frame count"
rgroup.long 0x2328++0x03
line.long 0x00 "P0_LOOKUP_HIT_CNT,Port"
hexmask.long.tbyte 0x00 0.--23. 1. "LOOKUP_HIT_CNT,Port n Lookup hit count"
rgroup.long 0x2728++0x03
line.long 0x00 "P1_LOOKUP_HIT_CNT,Port"
hexmask.long.tbyte 0x00 0.--23. 1. "LOOKUP_HIT_CNT,Port n Lookup hit count"
rgroup.long 0x2B28++0x03
line.long 0x00 "P2_LOOKUP_HIT_CNT,Port"
hexmask.long.tbyte 0x00 0.--23. 1. "LOOKUP_HIT_CNT,Port n Lookup hit count"
group.long 0x232C++0x03
line.long 0x00 "P0_ERROR_STATUS,Port"
bitfld.long 0x00 4. "EOVRSZ,Express frame over size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 3. "EUNDSZ,Express frame under size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 2. "POVRSZ,Preemptable frame over size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 1. "PUNDSZ,Preemptable frame under size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 0. "SOPERR,SOP error detected in frame parser" "0,1"
group.long 0x272C++0x03
line.long 0x00 "P1_ERROR_STATUS,Port"
bitfld.long 0x00 4. "EOVRSZ,Express frame over size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 3. "EUNDSZ,Express frame under size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 2. "POVRSZ,Preemptable frame over size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 1. "PUNDSZ,Preemptable frame under size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 0. "SOPERR,SOP error detected in frame parser" "0,1"
group.long 0x2B2C++0x03
line.long 0x00 "P2_ERROR_STATUS,Port"
bitfld.long 0x00 4. "EOVRSZ,Express frame over size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 3. "EUNDSZ,Express frame under size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 2. "POVRSZ,Preemptable frame over size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 1. "PUNDSZ,Preemptable frame under size error detected in frame parser" "0,1"
newline
bitfld.long 0x00 0. "SOPERR,SOP error detected in frame parser" "0,1"
group.long 0x2330++0x03
line.long 0x00 "P0_ERROR_MASK,Port"
bitfld.long 0x00 4. "MEOVRSZ,Error mask of EOVRSZ (Express frame over size error)" "0,1"
newline
bitfld.long 0x00 3. "MEUNDSZ,Error mask of EUNDSZ (Express frame under size error)" "0,1"
newline
bitfld.long 0x00 2. "MPOVRSZ,Error mask of POVRSZ (Preemptable frame over size error)" "0,1"
newline
bitfld.long 0x00 1. "MPUNDSZ,Error mask of PUNDSZ (Preemptable frame under size error)" "0,1"
newline
bitfld.long 0x00 0. "MSOPERR,Error mask of SOPERR (SOP error)" "0,1"
group.long 0x2730++0x03
line.long 0x00 "P1_ERROR_MASK,Port"
bitfld.long 0x00 4. "MEOVRSZ,Error mask of EOVRSZ (Express frame over size error)" "0,1"
newline
bitfld.long 0x00 3. "MEUNDSZ,Error mask of EUNDSZ (Express frame under size error)" "0,1"
newline
bitfld.long 0x00 2. "MPOVRSZ,Error mask of POVRSZ (Preemptable frame over size error)" "0,1"
newline
bitfld.long 0x00 1. "MPUNDSZ,Error mask of PUNDSZ (Preemptable frame under size error)" "0,1"
newline
bitfld.long 0x00 0. "MSOPERR,Error mask of SOPERR (SOP error)" "0,1"
group.long 0x2B30++0x03
line.long 0x00 "P2_ERROR_MASK,Port"
bitfld.long 0x00 4. "MEOVRSZ,Error mask of EOVRSZ (Express frame over size error)" "0,1"
newline
bitfld.long 0x00 3. "MEUNDSZ,Error mask of EUNDSZ (Express frame under size error)" "0,1"
newline
bitfld.long 0x00 2. "MPOVRSZ,Error mask of POVRSZ (Preemptable frame over size error)" "0,1"
newline
bitfld.long 0x00 1. "MPUNDSZ,Error mask of PUNDSZ (Preemptable frame under size error)" "0,1"
newline
bitfld.long 0x00 0. "MSOPERR,Error mask of SOPERR (SOP error)" "0,1"
rgroup.long 0x23C0++0x03
line.long 0x00 "CHANNEL_STATE,Enable/Disable State of Ingress Channels"
bitfld.long 0x00 2. "CH2ACT," "0: Channel port 2 is in reset,1: Channel port 2 is enabled"
newline
bitfld.long 0x00 1. "CH1ACT," "0: Channel port 1 is in reset,1: Channel port 1 is enabled"
newline
bitfld.long 0x00 0. "CH0ACT," "0: Channel port 0 is in reset,1: Channel port 0 is enabled"
wgroup.long 0x23C4++0x03
line.long 0x00 "CHANNEL_ENABLE,Enable Operation of Channel"
bitfld.long 0x00 2. "CH2ENA," "0: Ignored,1: Enable Channel port 2"
newline
bitfld.long 0x00 1. "CH1ENA," "0: Ignored,1: Enable Channel port 1"
newline
bitfld.long 0x00 0. "CH0ENA," "0: Ignored,1: Enable Channel port 0"
wgroup.long 0x23C8++0x03
line.long 0x00 "CHANNEL_DISABLE,Disable and Reset Operation of Channel"
bitfld.long 0x00 2. "CH2DIS," "0: Ignored,1: Disable and reset Channel port 2"
newline
bitfld.long 0x00 1. "CH1DIS," "0: Ignored,1: Disable and reset Channel port 1"
newline
bitfld.long 0x00 0. "CH0DIS," "0: Ignored,1: Disable and reset Channel port 0"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x23CC)++0x03
line.long 0x00 "ASI_MEM_WDATA$1,Memory Write Data Word"
hexmask.long 0x00 0.--31. 1. "WDATA,Destination MAC address regeneration write data"
repeat.end
group.long 0x23DC++0x03
line.long 0x00 "ASI_MEM_ADDR,Memory Address and R/W Control"
bitfld.long 0x00 8.--10. "MEM_REQ,Memory access request" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "MEM_WEN," "0: ,1: "
newline
hexmask.long.byte 0x00 0.--6. 1. "ADDR,Memory access address"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
rgroup.long ($2+0x23E0)++0x03
line.long 0x00 "ASI_MEM_RDATA$1,Memory Read Data Word"
hexmask.long 0x00 0.--31. 1. "RDATA,Destination MAC address regeneration read data"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2400)++0x03
line.long 0x00 "P1_QSTMACU$1,Qci Stream Filter Table MAC Address Upper Part"
bitfld.long 0x00 16. "DASA,MAC address (MACA) select" "0: MACA is a source address,1: MACA is a destination address"
newline
hexmask.long.word 0x00 0.--15. 1. "MACA,Qci stream filter table MAC address[47:32]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2404)++0x03
line.long 0x00 "P1_QSTMACD$1,Qci Stream Filter Table MAC Address Downer Part"
hexmask.long 0x00 0.--31. 1. "MACA,Qci stream filter table MAC address[31:0]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2408)++0x03
line.long 0x00 "P1_QSTMAMU$1,Qci Stream Filter Table MAC Address Mask Upper Part"
hexmask.long.word 0x00 0.--15. 1. "MACAM,Qci stream filter table MAC address bit mask[47:32]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x240C)++0x03
line.long 0x00 "P1_QSTMAMD$1,Qci Stream Filter Table MAC Address Mask Downer Part"
hexmask.long 0x00 0.--31. 1. "MACAM,Qci stream filter table MAC address bit mask[31:0]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2410)++0x03
line.long 0x00 "P1_QSFTVL$1,Qci Stream Filter Table VLAN"
bitfld.long 0x00 16.--17. "TAGMD," "0: Un Tagged (the frame must be untagged to..,1: C-Tagged (the frame must be C-Tagged to match..,2: Reserved,3: Do not check VLAN Tag (VLAN Tag check is.."
newline
bitfld.long 0x00 13.--15. "PCP," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI," "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VLANID,"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2414)++0x03
line.long 0x00 "P1_QSFTVLM$1,Qci Stream Filter Table VLAN Mask"
bitfld.long 0x00 13.--15. "PCPM,Qci stream filter table VLAN PCP[2:0] bit mask" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEIM," "0: No bit mask,1: Bit mask (the bit value of the DEI is ignored.."
newline
hexmask.long.word 0x00 0.--11. 1. "VLANIDM,Qci stream filter table VLAN ID[11:0] bit mask"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2418)++0x03
line.long 0x00 "P1_QSFTBL$1,Qci Stream Filter Table SDU/Gate/Meter ID"
bitfld.long 0x00 28. "QSMSM,Qci stream MSDU mode" "0: No effect,1: When a frame is discard by MSDU over all.."
newline
bitfld.long 0x00 27. "MSDUE," "0: Check disable,1: Check enable"
newline
hexmask.long.word 0x00 16.--26. 1. "MSDU,Qci stream filter table max SDU size"
newline
bitfld.long 0x00 12. "MEIDV," "0: Meter Check disable,1: Meter Check enable"
newline
bitfld.long 0x00 8.--10. "MEID," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "GAIDV," "0: Gating Check disable,1: Gating Check enable"
newline
bitfld.long 0x00 4.--6. "GAID," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0. "QSTE," "0: Stream filter Table disable (All frame unmatch),1: Stream filter Table enable"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x241C)++0x03
line.long 0x00 "P1_QSMFC$1,Qci Stream Match Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QSMFC,Qci stream match packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x2420)++0x03
line.long 0x00 "P1_QMSPPC$1,Qci MSDU Passed Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMSPPC,Qci msdu passed packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x2424)++0x03
line.long 0x00 "P1_QMSRPC$1,Qci MSDU Reject Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMSRPC,Qci MSDU rejected packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 )
rgroup.long ($2+0x2608)++0x03
line.long 0x00 "P1_QGDPC$1,Qci Gate"
hexmask.long.word 0x00 0.--15. 1. "QGDPC,Qci gate dropped packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2650)++0x03
line.long 0x00 "P1_QMDESC$1,Qci Port n Flow Meter"
bitfld.long 0x00 2. "CF,Coupling flag" "0,1"
newline
bitfld.long 0x00 1. "MM,Flow meter mode" "0: No effect,1: When discard frame by Flow Meter all frames.."
newline
bitfld.long 0x00 0. "RFD,Red frame drop" "0: A red frame is not dropped,1: A red frame is dropped"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2654)++0x03
line.long 0x00 "P1_QMCBSC$1,Qci Meter CBS Configuration Port n Meter"
hexmask.long.tbyte 0x00 0.--17. 1. "CBS,CBS (Committed Burst Size)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2658)++0x03
line.long 0x00 "P1_QMCIRC$1,Qci Meter CIR Configuration n"
hexmask.long.tbyte 0x00 0.--16. 1. "CIR,CIR (Committed Information Rate)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
rgroup.long ($2+0x265C)++0x03
line.long 0x00 "P1_QMGPC$1,Qci Meter Green Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMGPC,Qci meter green packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
rgroup.long ($2+0x2660)++0x03
line.long 0x00 "P1_QMRPC$1,Qci Meter Red Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMRPC,Qci meter red packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2800)++0x03
line.long 0x00 "P2_QSTMACU$1,Qci Stream Filter Table MAC Address Upper Part"
bitfld.long 0x00 16. "DASA,MAC address (MACA) select" "0: MACA is a source address,1: MACA is a destination address"
newline
hexmask.long.word 0x00 0.--15. 1. "MACA,Qci stream filter table MAC address[47:32]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2804)++0x03
line.long 0x00 "P2_QSTMACD$1,Qci Stream Filter Table MAC Address Downer Part"
hexmask.long 0x00 0.--31. 1. "MACA,Qci stream filter table MAC address[31:0]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2808)++0x03
line.long 0x00 "P2_QSTMAMU$1,Qci Stream Filter Table MAC Address Mask Upper Part"
hexmask.long.word 0x00 0.--15. 1. "MACAM,Qci stream filter table MAC address bit mask[47:32]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x280C)++0x03
line.long 0x00 "P2_QSTMAMD$1,Qci Stream Filter Table MAC Address Mask Downer Part"
hexmask.long 0x00 0.--31. 1. "MACAM,Qci stream filter table MAC address bit mask[31:0]"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2810)++0x03
line.long 0x00 "P2_QSFTVL$1,Qci Stream Filter Table VLAN"
bitfld.long 0x00 16.--17. "TAGMD," "0: Un Tagged (the frame must be untagged to..,1: C-Tagged (the frame must be C-Tagged to match..,2: Reserved,3: Do not check VLAN Tag (VLAN Tag check is.."
newline
bitfld.long 0x00 13.--15. "PCP," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI," "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "VLANID,"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2814)++0x03
line.long 0x00 "P2_QSFTVLM$1,Qci Stream Filter Table VLAN Mask"
bitfld.long 0x00 13.--15. "PCPM,Qci stream filter table VLAN PCP[2:0] bit mask" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEIM," "0: No bit mask,1: Bit mask (the bit value of the DEI is ignored.."
newline
hexmask.long.word 0x00 0.--11. 1. "VLANIDM,Qci stream filter table VLAN ID[11:0] bit mask"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
group.long ($2+0x2818)++0x03
line.long 0x00 "P2_QSFTBL$1,Qci Stream Filter Table SDU/Gate/Meter ID"
bitfld.long 0x00 28. "QSMSM,Qci stream MSDU mode" "0: No effect,1: When a frame is discard by MSDU over all.."
newline
bitfld.long 0x00 27. "MSDUE," "0: Check disable,1: Check enable"
newline
hexmask.long.word 0x00 16.--26. 1. "MSDU,Qci stream filter table max SDU size"
newline
bitfld.long 0x00 12. "MEIDV," "0: Meter Check disable,1: Meter Check enable"
newline
bitfld.long 0x00 8.--10. "MEID," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "GAIDV," "0: Gating Check disable,1: Gating Check enable"
newline
bitfld.long 0x00 4.--6. "GAID," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0. "QSTE," "0: Stream filter Table disable (All frame unmatch),1: Stream filter Table enable"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x281C)++0x03
line.long 0x00 "P2_QSMFC$1,Qci Stream Match Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QSMFC,Qci stream match packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x2820)++0x03
line.long 0x00 "P2_QMSPPC$1,Qci MSDU Passed Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMSPPC,Qci msdu passed packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x28 0x50 0x78 0xA0 0xC8 0xF0 0x118 )
rgroup.long ($2+0x2824)++0x03
line.long 0x00 "P2_QMSRPC$1,Qci MSDU Reject Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMSRPC,Qci MSDU rejected packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 )
rgroup.long ($2+0x2A08)++0x03
line.long 0x00 "P2_QGDPC$1,Qci Gate"
hexmask.long.word 0x00 0.--15. 1. "QGDPC,Qci gate dropped packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2A50)++0x03
line.long 0x00 "P2_QMDESC$1,Qci Port n Flow Meter"
bitfld.long 0x00 2. "CF,Coupling flag" "0,1"
newline
bitfld.long 0x00 1. "MM,Flow meter mode" "0: No effect,1: When discard frame by Flow Meter all frames.."
newline
bitfld.long 0x00 0. "RFD,Red frame drop" "0: A red frame is not dropped,1: A red frame is dropped"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2A54)++0x03
line.long 0x00 "P2_QMCBSC$1,Qci Meter CBS Configuration Port n Meter"
hexmask.long.tbyte 0x00 0.--17. 1. "CBS,CBS (Committed Burst Size)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
group.long ($2+0x2A58)++0x03
line.long 0x00 "P2_QMCIRC$1,Qci Meter CIR Configuration n"
hexmask.long.tbyte 0x00 0.--16. 1. "CIR,CIR (Committed Information Rate)"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
rgroup.long ($2+0x2A5C)++0x03
line.long 0x00 "P2_QMGPC$1,Qci Meter Green Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMGPC,Qci meter green packet count"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x14 0x28 0x3C 0x50 0x64 0x78 0x8C )
rgroup.long ($2+0x2A60)++0x03
line.long 0x00 "P2_QMRPC$1,Qci Meter Red Packet Count"
hexmask.long.word 0x00 0.--15. 1. "QMRPC,Qci meter red packet count"
repeat.end
rgroup.long 0x3404++0x03
line.long 0x00 "STATN_STATUS,Statistics Status Register"
bitfld.long 0x00 0. "BUSY,Statistics module is busy" "0,1"
group.long 0x3408++0x03
line.long 0x00 "STATN_CONFIG,Statistics Configure Register"
bitfld.long 0x00 31. "RESET,When set to 1 all internal functions are aborted and return to a stable state (flushes prescalers)" "0,1"
newline
bitfld.long 0x00 1. "CLEAR_ON_READ,When set to 1 a read to a counter resets it to 0" "0,1"
group.long 0x340C++0x03
line.long 0x00 "STATN_CONTROL,Statistics Control Register"
bitfld.long 0x00 31. "CMD_CLEAR,Clear Channel Counters Command" "0,1"
newline
bitfld.long 0x00 29. "CLEAR_PRE,Clear the internal pre-scaler counters of ports when a clear occurs" "0,1"
newline
bitfld.long 0x00 0.--3. "CHANMASK,One bit per port" "0: port 0 bit,1: port 1 and so on,?..."
group.long 0x3410++0x03
line.long 0x00 "STATN_CLEARVALUE_LO,Statistics Clear Value Lower Register"
hexmask.long 0x00 0.--31. 1. "STATN_CLEARVALUE_LO,32-bit value written into statistics memory when a clear command (STATN_CONTROL.CMD_CLEAR) is triggered (see ) or when a clear-after-read is used"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x48 0x90 0xD8 )
rgroup.long ($2+0x3468)++0x03
line.long 0x00 "ODISC$1,Port"
hexmask.long 0x00 0.--31. 1. "ODISC,Port n outgoing frames discarded due to output queue congestion"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x48 0x90 0xD8 )
rgroup.long ($2+0x346C)++0x03
line.long 0x00 "IDISC_VLAN$1,Port"
hexmask.long 0x00 0.--31. 1. "IDISC_VLAN,Port n incoming frames discarded due to mismatching or missing VLAN ID while VLAN verification was enabled"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x48 0x90 0xD8 )
rgroup.long ($2+0x3470)++0x03
line.long 0x00 "IDISC_UNTAGGED$1,Port"
hexmask.long 0x00 0.--31. 1. "IDISC_UNTAGGED,Port n incoming frames discarded due to missing VLAN tag"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x48 0x90 0xD8 )
rgroup.long ($2+0x3474)++0x03
line.long 0x00 "IDISC_BLOCKED$1,Port"
hexmask.long 0x00 0.--31. 1. "IDISC_BLOCKED,Port n incoming frames discarded (after learning) as the port is configured in blocking mode"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x48 0x90 0xD8 )
rgroup.long ($2+0x3478)++0x03
line.long 0x00 "IDISC_ANY$1,Port"
hexmask.long 0x00 0.--31. 1. "IDISC_ANY,Port n total incoming frames discarded"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x347C)++0x03
line.long 0x00 "IDISC_SRCFLT$1,Port"
hexmask.long 0x00 0.--31. 1. "IDISC_SRCFLT,Port n counts the number of incoming frames discarded due to the MAC address source filter"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x3480)++0x03
line.long 0x00 "TX_HOLD_REQ_CNT$1,Port"
hexmask.long 0x00 0.--31. 1. "TX_HOLD_REQ_CNT,"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x3484)++0x03
line.long 0x00 "TX_FRAG_CNT$1,Port"
hexmask.long 0x00 0.--31. 1. "TX_FRAG_CNT,Port n increments when an additional mPacket is transmitted due to preemption"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x3488)++0x03
line.long 0x00 "RX_FRAG_CNT$1,Port"
hexmask.long 0x00 0.--31. 1. "RX_FRAG_CNT,Port n increments for every continuation mPacket received"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x348C)++0x03
line.long 0x00 "RX_ASSY_OK_CNT$1,Port"
hexmask.long 0x00 0.--31. 1. "RX_ASSY_OK_CNT,Port n increments when a preempted frame is successfully assembled"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x3490)++0x03
line.long 0x00 "RX_ASSY_ERR_CNT$1,Port"
hexmask.long.word 0x00 0.--15. 1. "RX_ASSY_ERR_CNT,Port n increments when a preempted frame is incorrectly assembled"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x3494)++0x03
line.long 0x00 "RX_SMD_ERR_CNT$1,Port"
hexmask.long.word 0x00 0.--15. 1. "RX_SMD_ERR_CNT,Port n increments when a frame with an SMD-Cx is received and no assembly is in progress"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x3498)++0x03
line.long 0x00 "TX_VERIFY_OK_CNT$1,Port"
hexmask.long.byte 0x00 0.--7. 1. "TX_VERIFY_OK_CNT,Port n increments for every VERIFY frame transmitted"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x349C)++0x03
line.long 0x00 "TX_RESPONSE_OK_CNT$1,Port"
hexmask.long.byte 0x00 0.--7. 1. "TX_RESPONSE_OK_CNT,Port n increments for every RESPONSE frame transmitted"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x34A0)++0x03
line.long 0x00 "RX_VERIFY_OK_CNT$1,Port"
hexmask.long.byte 0x00 0.--7. 1. "RX_VERIFY_OK_CNT,Port n increments for every valid VERIFY frame received"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x34A4)++0x03
line.long 0x00 "RX_RESPONSE_OK_CNT$1,Port"
hexmask.long.byte 0x00 0.--7. 1. "RX_RESPONSE_OK_CNT,Port n increments for every valid RESPONSE frame received"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x34A8)++0x03
line.long 0x00 "RX_VERIFY_BAD_CNT$1,Port"
hexmask.long.byte 0x00 0.--7. 1. "RX_VERIFY_BAD_CNT,Port n increments for every errored VERIFY frame received"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x00 0x48 0x90 )
rgroup.long ($2+0x34AC)++0x03
line.long 0x00 "RX_RESPONSE_BAD_CNT$1,Port"
hexmask.long.byte 0x00 0.--7. 1. "RX_RESPONSE_BAD_CNT,Port n increments for every errored RESPONSE frame received"
repeat.end
group.long 0x3B00++0x03
line.long 0x00 "MMCTL_OUT_CT,Cut-Through Register"
bitfld.long 0x00 16.--18. "CT_OVR,1 bit per-port value to set the Cut Through behavior of the output ports" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "CT_OVR_ENA,Per-port bit mask to enable overriding the Cut-Through (CT) behavior of the output ports with CT_OVR" "0,1,2,3,4,5,6,7"
group.long 0x3B04++0x03
line.long 0x00 "MMCTL_CTFL_P0_3_ENA,Cut-Through Frame Length Enable Register"
hexmask.long.byte 0x00 16.--23. 1. "CTFL_P2_ENA,Port 2 bit mask of n bits where n is the number of queues per port indicating whether the CTFL is used for Cut-Through (CT) frames"
newline
hexmask.long.byte 0x00 8.--15. 1. "CTFL_P1_ENA,Port 1 bit mask of n bits where n is the number of queues per port indicating whether the CTFL is used for Cut-Through (CT) frames"
newline
hexmask.long.byte 0x00 0.--7. 1. "CTFL_P0_ENA,Port 0 bit mask of n bits where n is the number of queues per port indicating whether the CTFL is used for Cut-Through (CT) frames"
group.long 0x3B20++0x03
line.long 0x00 "MMCTL_YELLOW_BYTE_LENGTH_Pn,Port n Yellow Period Byte Length Register (n = 0 to 2)"
bitfld.long 0x00 16. "YLEN_EN,When set to 1 enables transmission when OUT_CT_ENA is low only if the frame length is less than YELLOW_LEN" "0,1"
newline
hexmask.long.word 0x00 2.--15. 1. "YELLOW_LEN,Length in bytes of the YELLOW period for port n"
group.long 0x3B40++0x03
line.long 0x00 "MMCTL_POOL0_CTR,Memory Pool Counter (n = 0 to 1)"
hexmask.long.word 0x00 16.--25. 1. "USED,Reports the current available number of used cells for this memory pool"
newline
hexmask.long.word 0x00 0.--9. 1. "CELLS,Memory pool configuration for pool n"
group.long 0x3B44++0x03
line.long 0x00 "MMCTL_POOL1_CTR,Memory Pool Counter (n = 0 to 1)"
hexmask.long.word 0x00 16.--25. 1. "USED,Reports the current available number of used cells for this memory pool"
newline
hexmask.long.word 0x00 0.--9. 1. "CELLS,Memory pool configuration for pool n"
group.long 0x3B60++0x03
line.long 0x00 "MMCTL_POOL_GLOBAL,Memory Pool Configuration Register"
hexmask.long.word 0x00 16.--25. 1. "USED,Reports the current number of used cells for the global shared pool"
newline
hexmask.long.word 0x00 0.--9. 1. "CELLS,Memory pool configuration for the global pool"
rgroup.long 0x3B64++0x03
line.long 0x00 "MMCTL_POOL_STATUS,Memory Pool Status Register"
hexmask.long.byte 0x00 0.--7. 1. "QUEUE_FULL,Per-queue pool full indication"
group.long 0x3B68++0x03
line.long 0x00 "MMCTL_POOL_QMAP,Queue MAP Register"
bitfld.long 0x00 31. "Q7_ENA,Queue 7 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q7_MAP"
newline
bitfld.long 0x00 28. "Q7_MAP,Queue 7 Memory Pool" "0,1"
newline
bitfld.long 0x00 27. "Q6_ENA,Queue 6 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q6_MAP"
newline
bitfld.long 0x00 24. "Q6_MAP,Queue 6 Memory Pool" "0,1"
newline
bitfld.long 0x00 23. "Q5_ENA,Queue 5 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q5_MAP"
newline
bitfld.long 0x00 20. "Q5_MAP,Queue 5 Memory Pool" "0,1"
newline
bitfld.long 0x00 19. "Q4_ENA,Queue 4 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q4_MAP"
newline
bitfld.long 0x00 16. "Q4_MAP,Queue 4 Memory Pool" "0,1"
newline
bitfld.long 0x00 15. "Q3_ENA,Queue 3 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q3_MAP"
newline
bitfld.long 0x00 12. "Q3_MAP,Queue 3 Memory Pool" "0,1"
newline
bitfld.long 0x00 11. "Q2_ENA,Queue 2 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q2_MAP"
newline
bitfld.long 0x00 8. "Q2_MAP,Queue 2 Memory Pool" "0,1"
newline
bitfld.long 0x00 7. "Q1_ENA,Queue 1 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q1_MAP"
newline
bitfld.long 0x00 4. "Q1_MAP,Queue 1 Memory Pool" "0,1"
newline
bitfld.long 0x00 3. "Q0_ENA,Queue 0 Memory Pool Enabled" "0: The queue only uses cells from the global pool,1: The queue uses the pool programmed in Q0_MAP"
newline
bitfld.long 0x00 0. "Q0_MAP,Queue 0 Memory Pool" "0,1"
wgroup.long 0x3B6C++0x03
line.long 0x00 "MMCTL_QGATE,Queue Gate State Register"
hexmask.long.word 0x00 16.--31. 1. "QUEUE_GATE,2-bit per queue indicating the action to be performed on each queue of the ports indicated by PORT_MASK"
newline
bitfld.long 0x00 0.--3. "PORT_MASK,Per-port bit mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
wgroup.long 0x3B70++0x03
line.long 0x00 "MMCTL_QTRIG,Queue Trigger Register"
hexmask.long.byte 0x00 16.--23. 1. "QUEUE_TRIG,1-bit per queue indicating from which queues a frame is to be transmitted from the ports indicated by PORT_MASK"
newline
bitfld.long 0x00 0.--3. "PORT_MASK,Per-port bit mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
wgroup.long 0x3B74++0x03
line.long 0x00 "MMCTL_QFLUSH,Flush Event Select Register"
bitfld.long 0x00 24.--25. "ACTION,Selects the flush state for the queues indicated by QUEUE_MASK in the ports indicated by PORT_MASK" "0: Disable flush,1: Flush when queue is closed discarding any new..,2: Flush on queue close until empty then stops..,3: TRIGGER flush until empty then return to.."
newline
hexmask.long.byte 0x00 16.--23. 1. "QUEUE_MASK,1 bit per queue indicating for which queues of the ports indicated by PORT_MASK the flush state is changed as indicated in ACTION"
newline
bitfld.long 0x00 0.--3. "PORT_MASK,Per-port bit mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x3B78++0x03
line.long 0x00 "MMCTL_QCLOSED_STATUS_P0_3,Queue Closed Status Register"
hexmask.long.byte 0x00 16.--23. 1. "P2_STATUS,Per-queue closed status of Port 2 (1-bit per queue)"
newline
hexmask.long.byte 0x00 8.--15. 1. "P1_STATUS,Per-queue closed status of Port 1 (1-bit per queue)"
newline
hexmask.long.byte 0x00 0.--7. 1. "P0_STATUS,Per-queue closed status of Port 0 (1-bit per queue)"
group.long 0x3B80++0x03
line.long 0x00 "MMCTL_1FRAME_MODE_Pn,Port n 1-Frame Mode Configuration Register (n = 0 to 2)"
hexmask.long.byte 0x00 16.--23. 1. "Q_BUF_ENA,1 bit per queue"
newline
hexmask.long.byte 0x00 0.--7. 1. "Q_1FRAME_ENA,1 bit per queue"
rgroup.long 0x3BA0++0x03
line.long 0x00 "MMCTL_P0_3_QUEUE_STATUS,Queue Status Indicator"
hexmask.long.byte 0x00 16.--23. 1. "P2_Q_STATUS,Port 2 Per-Queue Bit Indication"
newline
hexmask.long.byte 0x00 8.--15. 1. "P1_Q_STATUS,Port 1 Per-Queue Bit Indication"
newline
hexmask.long.byte 0x00 0.--7. 1. "P0_Q_STATUS,Port 0 Per-Queue Bit Indication"
rgroup.long 0x3BA8++0x03
line.long 0x00 "MMCTL_P0_3_FLUSH_STATUS,Queue Flush Status Indicator"
hexmask.long.byte 0x00 16.--23. 1. "P2_F_STATUS,Port 2 per-Queue Bit Indication on whether the queue is flushing frames (read 1) or not (read 0)"
newline
hexmask.long.byte 0x00 8.--15. 1. "P1_F_STATUS,Port 1 per-Queue Bit Indication on whether the queue is flushing frames (read 1) or not (read 0)"
newline
hexmask.long.byte 0x00 0.--7. 1. "P0_F_STATUS,Port 0 per-Queue Bit Indication on whether the queue is flushing frames (read 1) or not (read 0)"
group.long 0x3BB0++0x03
line.long 0x00 "MMCTL_DLY_QTRIGGER_CTRL,Delayed Queue Trigger Control Register"
bitfld.long 0x00 30. "TIMER_SEL,Select the source timer to use for calculating the time" "0: Timer 0,1: Timer 1"
newline
hexmask.long 0x00 0.--29. 1. "DELAY_TIME,30-bit time in nanoseconds indicates the time after the trigger request from the pattern matchers to generate the event"
group.long 0x3BB4++0x03
line.long 0x00 "MMCTL_PREEMPT_QUEUES,Preemptable Queues Configures Register"
hexmask.long.byte 0x00 8.--15. 1. "PREEMPT_ON_QCLOSE,Per-queue configuration bit to enable preempting a frame when the queue goes from OPEN to CLOSED"
newline
hexmask.long.byte 0x00 0.--7. 1. "PREEMPT_ENA,Per-queue enable bit to configure which queues are used for preemptable traffic"
group.long 0x3BB8++0x03
line.long 0x00 "MMCTL_HOLD_CONTROL,Request Preemption Register"
bitfld.long 0x00 16.--18. "Q_HOLD_REQ_RELEASE,A per-port bit that forces a release of preemption request using MM_CTL.request (hold_req)" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "Q_HOLD_REQ_FORCE,A per-port bit that forces a preempt request using MM_CTL.request (hold_req)" "0,1,2,3,4,5,6,7"
rgroup.long 0x3BBC++0x03
line.long 0x00 "MMCTL_PREEMPT_STATUS,Preemption State Register"
bitfld.long 0x00 16.--18. "HOLD_REQ_STATE,A per-port bit that indicates if a port is preempted using MM_CTL.request (hold_req)" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "PREEMPT_STATE,A per-port bit that indicates if a port is in a preempted state" "0,1,2,3,4,5,6,7"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C )
group.long ($2+0x3BC0)++0x03
line.long 0x00 "MMCTL_CQF_CTRL_P$1,Port"
bitfld.long 0x00 15. "REF_SEL0,Select whether the gate control signal used for the CQF group is based on the egress port when set to 0 or the ingress port when set to 1" "0,1"
newline
bitfld.long 0x00 14. "USE_SOP0,When set to 1 the CFQ queue is determined when the SOP is received at the frame writer in the memory controller" "0,1"
newline
bitfld.long 0x00 11.--13. "GATE_SEL0,Select which gate control signal is used for selecting the output queue (these signals are the same as the ETHSW_TDMAOUT pins)" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--10. "QUEUE_SEL0,Select which two physical queues are used for CQF" "0,1,2,3,4,5,6,7"
newline
hexmask.long.byte 0x00 0.--7. 1. "PRIO_ENABLE0,A per-queue enable to select which ingress priorities are queued in the two CQF queues"
repeat.end
rgroup.long 0x3BE0++0x03
line.long 0x00 "MMCTL_P0_3_QCLOSED_NONEMPTY,Port Queue Status Register"
hexmask.long.byte 0x00 24.--31. 1. "P3_Q_STATUS,Port 3 per-queue bit indication on whether the queue transitioned from open to closed state while frames were still queued"
newline
hexmask.long.byte 0x00 16.--23. 1. "P2_Q_STATUS,Port 2 per-queue bit indication on whether the queue transitioned from open to closed state while frames were still queued"
newline
hexmask.long.byte 0x00 8.--15. 1. "P1_Q_STATUS,Port 1 per-queue bit indication on whether the queue transitioned from open to closed state while frames were still queued"
newline
hexmask.long.byte 0x00 0.--7. 1. "P0_Q_STATUS,Port 0 per-queue bit indication on whether the queue transitioned from open to closed state while frames were still queued"
group.long 0x3BE8++0x03
line.long 0x00 "MMCTL_PREEMPT_EXTRA,Frame Preemption Extra Configuration Register"
bitfld.long 0x00 4.--7. "LAST_PFRM_ADJ,Adjust the preemptable threshold when reaching the end of the frame in increments of 4 bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "MIN_PFRM_ADJ,Adjust the minimum mPacket length in increments of 4 bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x3C00++0x03
line.long 0x00 "DLR_CONTROL,DLR Control Register"
hexmask.long.word 0x00 8.--19. 1. "US_TIME,Number of clock cycles required for 1 microsecond for the switch operating clock"
newline
bitfld.long 0x00 4. "IGNORE_INVTM,Enable ignore beacon frames with invalid timeout timer" "0,1"
newline
bitfld.long 0x00 2. "LOOP_FILTER_ENA,Enable the loop filter function" "0,1"
newline
bitfld.long 0x00 1. "AUTOFLUSH,Enable automatic flushing of unicast entries in address table if ring reconfiguration occurs (see also DLR interrupt IRQ_flush_macaddr_ena in DLR_IRQ_CONTROL)" "0,1"
newline
bitfld.long 0x00 0. "ENABLE,Enable DLR extension module" "0,1"
rgroup.long 0x3C04++0x03
line.long 0x00 "DLR_STATUS,DLR Status Register"
hexmask.long.byte 0x00 24.--31. 1. "TOPOLOGY,Current Network Topology"
newline
bitfld.long 0x00 16.--17. "LINK_STATUS,Link Status" "0,1,2,3"
newline
hexmask.long.byte 0x00 8.--15. 1. "NODE_STATE,Local Node Current State"
newline
bitfld.long 0x00 0.--1. "LastBcnRcvPort,Last Beacon Receive Port" "0,1,2,3"
group.long 0x3C08++0x03
line.long 0x00 "DLR_ETH_TYP,DLR Ethernet Type Register"
hexmask.long.word 0x00 0.--15. 1. "DLR_ETH_TYP,Ethernet type to compare for DLR frame detection (initial value is 0x80E1)"
group.long 0x3C0C++0x03
line.long 0x00 "DLR_IRQ_CONTROL,DLR Interrupt Control Register"
bitfld.long 0x00 31. "atomic_AND,When set during a register-write the enable bits are ANDed with the current setting of the register" "0,1"
newline
bitfld.long 0x00 30. "atomic_OR,When set during a register-write the enable bits are ORed into the current setting of the register" "0,1"
newline
bitfld.long 0x00 29. "low_int_en,Enable active-low interrupt" "0,1"
newline
bitfld.long 0x00 15. "IRQ_frm_dscrd1,Enable Interrupt on Frame discard due to source address match with the local address on port 1" "0,1"
newline
bitfld.long 0x00 14. "IRQ_frm_dscrd0,Enable interrupt on frame discard due to source address match with the local address on port 0" "0,1"
newline
bitfld.long 0x00 13. "IRQ_bec_rcv1_ena,Enable interrupt on beacon frame detection on port 1" "0,1"
newline
bitfld.long 0x00 12. "IRQ_bec_rcv0_ena,Enable interrupt on beacon frame detection on port 0" "0,1"
newline
bitfld.long 0x00 11. "IRQ_invalid_tmr_ena,Enable interrupt on invalid range for beacon timeout timer value detection" "0,1"
newline
bitfld.long 0x00 10. "IRQ_ip_addr_chng_ena,Enable interrupt on IP address change detection within beacon frame from ring supervisor" "0,1"
newline
bitfld.long 0x00 9. "IRQ_sup_ignord_ena,Enable interrupt on beacon frame detection from a supervisor with lower precedence than the current ring supervisor or lower numeric value for MAC address when precedence is same" "0,1"
newline
bitfld.long 0x00 8. "IRQ_link_chng1_ena,Enable Link Status Change Interrupt Event for Port 1" "0,1"
newline
bitfld.long 0x00 7. "IRQ_link_chng0_ena,Enable Link Status Change Interrupt Event for Port 0" "0,1"
newline
bitfld.long 0x00 6. "IRQ_supr_chng_ena,Enable Interrupt on Ring Supervisor Change" "0,1"
newline
bitfld.long 0x00 5. "IRQ_bec_tmr1_exp_ena,Enable Interrupt on Beacon Timeout Timer Expire for Port 1" "0,1"
newline
bitfld.long 0x00 4. "IRQ_bec_tmr0_exp_ena," "0,1"
newline
bitfld.long 0x00 3. "IRQ_stop_nbchk1_ena,Enable Stop Request Neighbor Check Timeout Timer Interrupt for Port 1" "0,1"
newline
bitfld.long 0x00 2. "IRQ_stop_nbchk0_ena,Enable Stop Request Neighbor Check Timeout Timer Interrupt for Port 0" "0,1"
newline
bitfld.long 0x00 1. "IRQ_flush_macaddr_ena,Enable Flush Local MAC Address Table Interrupt" "0,1"
newline
bitfld.long 0x00 0. "IRQ_state_chng_ena,Enable Interrupt for State Change" "0,1"
group.long 0x3C10++0x03
line.long 0x00 "DLR_IRQ_STAT_ACK,DLR Interrupt Status/ACK Register"
bitfld.long 0x00 15. "frm_dscrd1_IRQ_pending,Latched Event on Frame Discard Due to Source Address Match with the Local Address on Port 1 (Loop Filter)" "0,1"
newline
bitfld.long 0x00 14. "frm_dscrd0_IRQ_pending,Latched Event on Frame Discard Due to Source Address Match with the Local Address on Port 0 (Loop Filter)" "0,1"
newline
bitfld.long 0x00 13. "bec_rcv1_IRQ_pending,Latched Event on Beacon Frame Detection on Port 1" "0,1"
newline
bitfld.long 0x00 12. "bec_rcv0_IRQ_pending,Latched Event on Beacon Frame Detection on Port 0" "0,1"
newline
bitfld.long 0x00 11. "invalid_tmr_IRQ_pending,Latched Event on Invalid Beacon Timeout Timer Value Detection Within Beacon Frame on Port 0 or Port 1" "0,1"
newline
bitfld.long 0x00 10. "ip_chng_IRQ_pending,Latched IP Address Change Event" "0,1"
newline
bitfld.long 0x00 9. "sup_ignord_IRQ_pending,Latched Event for Beacon Frame Detection from Ignored Supervisor" "0,1"
newline
bitfld.long 0x00 8. "Link1_IRQ_pending,Latched Link Status Change Event for Port 1" "0,1"
newline
bitfld.long 0x00 7. "Link0_IRQ_pending,Latched Link Status Change Event for Port 0" "0,1"
newline
bitfld.long 0x00 6. "supr_chng_IRQ_pending,Latched Supervisor Change Event" "0,1"
newline
bitfld.long 0x00 5. "bec_tmr1_IRQ_pending,Beacon Timeout Timer Expire Event for Port 1" "0,1"
newline
bitfld.long 0x00 4. "bec_tmr0_IRQ_pending,Beacon Timeout Timer Expire Event for Port 0" "0,1"
newline
bitfld.long 0x00 3. "nbchk1_IRQ_pending,Stop Request Event for Neighbor Check Timeout Timer for Port 1" "0,1"
newline
bitfld.long 0x00 2. "nbchk0_IRQ_pending,Stop Request Event for Neighbor Check Timeout Timer for Port 0" "0,1"
newline
bitfld.long 0x00 1. "flush_IRQ_pending,Latched Flush Event for MAC Address Learning Table" "0,1"
newline
bitfld.long 0x00 0. "state_chng_IRQ_pending,Latched State Change Event" "0,1"
group.long 0x3C14++0x03
line.long 0x00 "DLR_LOC_MAClo,DLR Local MAC Address Low Register"
hexmask.long 0x00 0.--31. 1. "LOC_MAC,First 4 octets of the Local MAC address for loop filter"
group.long 0x3C18++0x03
line.long 0x00 "DLR_LOC_MAChi,DLR Local MAC Address High Register"
hexmask.long.word 0x00 0.--15. 1. "LOC_MAC,Last 2 octets of local MAC address for loop filter"
rgroup.long 0x3C20++0x03
line.long 0x00 "DLR_SUPR_MAClo,DLR Supervisor MAC Address Low Register"
hexmask.long 0x00 0.--31. 1. "SUPR_MAC,First 4 octets of the active ring supervisor of the MAC address extracted from the Source Address field of the beacon frame"
rgroup.long 0x3C24++0x03
line.long 0x00 "DLR_SUPR_MAChi,DLR Supervisor MAC Address High Register"
hexmask.long.byte 0x00 16.--23. 1. "PRECE,Precedence value of the ring supervisor extracted from the Supervisor precedence field of the beacon frame"
newline
hexmask.long.word 0x00 0.--15. 1. "SUPR_MAC,Last 2 octets of the active ring supervisor of the MAC address extracted from the Source Address field of the beacon frame"
rgroup.long 0x3C28++0x03
line.long 0x00 "DLR_STATE_VLAN,DLR Ring Status/VLAN Register"
hexmask.long.word 0x00 16.--31. 1. "VLANINFO,IEEE 802.1Q VLAN Tag control field extracted from the VLAN info field of the beacon frame"
newline
bitfld.long 0x00 8. "VLANVALID,VLAN Valid" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "RINGSTAT,DLR ring state extracted from the Ring State field of the beacon frame"
rgroup.long 0x3C2C++0x03
line.long 0x00 "DLR_BEC_TMOUT,DLR Beacon Timeout Register"
hexmask.long 0x00 0.--31. 1. "BEC_TMOUT,Beacon timeout timer value extracted from the Beacon Timeout in microseconds field of the beacon frame"
rgroup.long 0x3C30++0x03
line.long 0x00 "DLR_BEC_INTRVL,DLR Beacon Interval Register"
hexmask.long 0x00 0.--31. 1. "BEC_INTRVL,Beacon interval extracted from the Beacon Interval field of the beacon frame"
rgroup.long 0x3C34++0x03
line.long 0x00 "DLR_SURR_IPADR,DLR Supervisor IP Address Register"
hexmask.long 0x00 0.--31. 1. "SUPR_IPADR,IP address of the ring supervisor extracted from the Source IP address field of the beacon frame"
rgroup.long 0x3C38++0x03
line.long 0x00 "DLR_ETH_STYP_VER,DLR Sub Type/Protocol Version Register"
hexmask.long.byte 0x00 16.--23. 1. "SPORT,Source port extracted from the Source Port field of the beacon frame"
newline
hexmask.long.byte 0x00 8.--15. 1. "PROTVER,DLR Ring Protocol Version extracted from the Ring Protocol Version field of the beacon frame"
newline
hexmask.long.byte 0x00 0.--7. 1. "SUBTYPE,DLR Ring Ether Sub Type extracted from the Ring Sub Type field of the beacon frame"
rgroup.long 0x3C3C++0x03
line.long 0x00 "DLR_INV_TMOUT,DLR Beacon Timeout Timer Register"
hexmask.long 0x00 0.--31. 1. "INV_TMOUT,Last out of range Beacon timeout timer value extracted from beacon frame on any of the port"
rgroup.long 0x3C40++0x03
line.long 0x00 "DLR_SEQ_ID,DLR Sequence ID Register"
hexmask.long 0x00 0.--31. 1. "SEQ_ID,Sequence ID of the last beacon frame extracted from the Sequence ID field of the beacon frame on port 0 or port 1"
group.long 0x3C58++0x03
line.long 0x00 "DLR_DSTlo,DLR Beacon Destination Address Low Register"
hexmask.long 0x00 0.--31. 1. "DLR_DST,First 4 octets of the beacon frame destination multicast address (01-21-6C-00-00-01)"
group.long 0x3C5C++0x03
line.long 0x00 "DLR_DSThi,DLR Beacon Destination Address High Register"
hexmask.long.word 0x00 0.--15. 1. "DLR_DST,Last 2 octets of the beacon frame destination multicast address (01-21-6C-00-00-01)"
rgroup.long 0x3C60++0x03
line.long 0x00 "DLR_RX_STAT0,DLR Received Frame Statistic Register 0"
hexmask.long 0x00 0.--31. 1. "RX_STAT0,Number of Beacon Frames Received on Port 0"
rgroup.long 0x3C64++0x03
line.long 0x00 "DLR_RX_ERR_STAT0,DLR Received Frame Error Statistic Register 0"
hexmask.long 0x00 0.--31. 1. "RX_ERR_STAT0,Number of Beacon Frames Received with CRC Error on Port 0"
group.long 0x3C6C++0x03
line.long 0x00 "DLR_RX_LF_STAT0,DLR Received Frame Loop Filter Statistic Register 0"
hexmask.long.byte 0x00 0.--7. 1. "RX_LF_STAT0,Number of discarded frames in port 0 due to loop filtering when LOOP_FILTER_ENA is set to 1"
rgroup.long 0x3C70++0x03
line.long 0x00 "DLR_RX_STAT1,DLR Received Frame Statistic Register 1"
hexmask.long 0x00 0.--31. 1. "RX_STAT1,Number of Beacon Frames Received on Port 1"
rgroup.long 0x3C74++0x03
line.long 0x00 "DLR_RX_ERR_STAT1,DLR Received Frame Error Statistic Register 1"
hexmask.long 0x00 0.--31. 1. "RX_ERR_STAT1,Number of Beacon Frames Received with CRC Error on Port 1"
group.long 0x3C7C++0x03
line.long 0x00 "DLR_RX_LF_STAT1,DLR Received Frame Loop Filter Statistic Register 1"
hexmask.long.byte 0x00 0.--7. 1. "RX_LF_STAT1,Number of discarded frames in port 1 due to loop filtering when LOOP_FILTER_ENA is set to 1"
group.long 0x3D00++0x03
line.long 0x00 "PRP_CONFIG,PRP Configuration Register"
bitfld.long 0x00 16. "PRP_AGE_ENA,Enable History Memory Aging Timer" "0,1"
newline
bitfld.long 0x00 9. "RCT_LEN_CHK_DIS,When set to 1 disables the RCT length field checking against the actual frame length" "0,1"
newline
bitfld.long 0x00 8. "TX_RCT_1588,Setting this bit affects IEEE 1588 frames that are forwarded through the switch (for example when used as RedBox) to both PRP_GROUP ports" "0: Do not append RCT to IEEE 1588 frames (frame..,1: Allow appending RCT to IEEE 1588 frames"
newline
bitfld.long 0x00 7. "TX_RCT_UNKNOWN,Should be 1 normally" "0: Do not append RCT to frames flooded because..,1: Allow appending RCT to frames that have.."
newline
bitfld.long 0x00 6. "TX_RCT_MULTICAST,Should be 1 normally" "0: Do not append RCT to multicast frames,1: Allow appending RCT to multicast frames"
newline
bitfld.long 0x00 5. "TX_RCT_BROADCAST,Should be 1 normally" "0: Do not append RCT to broadcast frames,1: Allow appending RCT to broadcast frames"
newline
bitfld.long 0x00 3.--4. "TX_RCT_MODE,Control Appending the RCT to Transmitted Frames on the Redundant Ports" "0: Append RCT if group only,1: Append RCT to group always,2: Disable RCT append,3: Append RCT always forced"
newline
bitfld.long 0x00 2. "RX_REMOVE_RCT,Allow PRP Port RX to Remove the RCT" "0,1"
newline
bitfld.long 0x00 1. "RX_DUP_ACCEPT,Enable Duplicate Accept Mode of Operation at Receive" "0,1"
newline
bitfld.long 0x00 0. "PRP_ENA,Enable PRP Operation" "0,1"
group.long 0x3D04++0x03
line.long 0x00 "PRP_GROUP,PRP Port Group Register"
bitfld.long 0x00 16.--18. "LANB_MASK,Defines which of the ports is considered the LAN B port" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "PRP_GROUP,Defines which two ports should be treated as redundant ports for PRP" "0,1,2,3,4,5,6,7"
group.long 0x3D08++0x03
line.long 0x00 "PRP_SUFFIX,PRP RCT Suffix"
hexmask.long.word 0x00 0.--15. 1. "PRP_SUFFIX,The Redundancy Control Trailer (RCT) suffix (initial value is 0x88FB)"
group.long 0x3D0C++0x03
line.long 0x00 "PRP_LANID,PRP LAN Identifier"
bitfld.long 0x00 4.--7. "LANBID,LAN B Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--3. "LANAID,LAN A Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x3D10++0x03
line.long 0x00 "DUP_W,PRP Max Duplicate Detection Window Size"
hexmask.long.byte 0x00 0.--7. 1. "DUP_W,Maximum Duplicate Detect Window Size"
group.long 0x3D14++0x03
line.long 0x00 "PRP_AGETIME,PRP Aging Time Define Register"
hexmask.long.tbyte 0x00 0.--23. 1. "PRP_AGETIME,Timeout in steps of 32 switch operating clock cycles to control aging of duplicate history data"
group.long 0x3D18++0x03
line.long 0x00 "PRP_IRQ_CONTROL,PRP Interrupt Control Register"
bitfld.long 0x00 3. "SEQMISSING,Enable interrupt for frames received and accepted that caused the history to skip a sequence number that was never received (for example a missing sequence number is being ignored and is now treated as a candidate for dropping)" "0,1"
newline
bitfld.long 0x00 2. "OUTOFSEQ,Enable interrupt for frames received and accepted but have an unexpected sequence number" "0,1"
newline
bitfld.long 0x00 1. "WRONGLAN,Enable interrupt for frames received at a redundant port with an invalid LAN identifier in its redundancy trailer" "0,1"
newline
bitfld.long 0x00 0. "MEMTOOLATE,Enable Interrupt for Memory Error Indications" "0,1"
group.long 0x3D1C++0x03
line.long 0x00 "PRP_IRQ_STAT_ACK,PRP Interrupt Status/ACK Register"
bitfld.long 0x00 3. "SEQMISSING,This bit functions the same as MEMTOOLATE bit" "0,1"
newline
bitfld.long 0x00 2. "OUTOFSEQ,This bit functions the same as MEMTOOLATE bit" "0,1"
newline
bitfld.long 0x00 1. "WRONGLAN,This bit functions the same as MEMTOOLATE bit" "0,1"
newline
bitfld.long 0x00 0. "MEMTOOLATE,Interrupt Pending Indication" "0,1"
group.long 0x3D20++0x03
line.long 0x00 "RM_ADDR_CTRL,PRP History Memory Transactions Control Register"
rbitfld.long 0x00 31. "BUSY,Transaction Busy Indication" "0,1"
newline
bitfld.long 0x00 29. "CLEAR,When set to 1 write all 0s to the entry selected by the given address" "0,1"
newline
bitfld.long 0x00 26. "READ,When set to 1 perform Single Read Transaction" "0,1"
newline
bitfld.long 0x00 25. "WRITE,When set to 1 perform a Single Write Transaction" "0,1"
newline
bitfld.long 0x00 23. "CLEAR_MEMORY,When set to 1 write all memory locations with 0" "0,1"
newline
bitfld.long 0x00 22. "CLEAR_DYNAMIC,When set to 1 scan the complete table for valid dynamic history entries and deletes them (writes entry with all 0s)" "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "address,Memory Address for Read and Write Transactions"
group.long 0x3D24++0x03
line.long 0x00 "RM_DATA,PRP Memory Data Register"
hexmask.long 0x00 0.--31. 1. "RM_DATA,Memory data register for read/write transactions controlled by RM_ADDR_CTRL"
group.long 0x3D28++0x03
line.long 0x00 "RM_DATA_HI,PRP Memory Data Higher Register"
hexmask.long 0x00 0.--31. 1. "RM_DATA_HI,A Second Data Register"
rgroup.long 0x3D2C++0x03
line.long 0x00 "RM_STATUS,PRP Memory Controller Status Indication"
hexmask.long.word 0x00 0.--11. 1. "ageaddress,Address of an entry which the aging process inspects when the aging timer expires next time"
group.long 0x3D30++0x03
line.long 0x00 "TxSeqTooLate,PRP Frame Transmission Retrieval of Failed Sequence"
bitfld.long 0x00 0.--3. "TxSeqTooLate,Retrieval of a Sequence Number Failed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x3D34++0x03
line.long 0x00 "CntErrWrongLanA,PRP Wrong ID LAN-A Count Register"
hexmask.long 0x00 0.--31. 1. "CntErrWrongLanA,Valid frames received on LAN A which have an RCT (valid length + suffix) but LAN ID is not matching LAN A"
rgroup.long 0x3D38++0x03
line.long 0x00 "CntErrWrongLanB,PRP Wrong ID LAN-B Count Register"
hexmask.long 0x00 0.--31. 1. "CntErrWrongLanB,Valid frames received on LAN B which have an RCT (valid length + suffix) but LAN ID is not matching LAN B"
rgroup.long 0x3D3C++0x03
line.long 0x00 "CntDupLanA,PRP Duplicate LAN-A Count Register"
hexmask.long 0x00 0.--31. 1. "CntDupLanA,Valid frames received on LAN A that were dropped by duplicate detection"
rgroup.long 0x3D40++0x03
line.long 0x00 "CntDupLanB,PRP Duplicate LAN-B Count Register"
hexmask.long 0x00 0.--31. 1. "CntDupLanB,Valid frames received on LAN B that were dropped by duplicate detection"
rgroup.long 0x3D44++0x03
line.long 0x00 "CntOutOfSeqLowA,PRP Sequence Error Low LAN-A Count Register"
hexmask.long 0x00 0.--31. 1. "CntOutOfSeqLowA,Valid and accepted frames received on LAN A with a sequence number less than last window (DUP_W)"
rgroup.long 0x3D48++0x03
line.long 0x00 "CntOutOfSeqLowB,PRP Sequence Error Low LAN-B Count Register"
hexmask.long 0x00 0.--31. 1. "CntOutOfSeqLowB,Valid and accepted frames received on LAN B with a sequence number less than last window (DUP_W)"
rgroup.long 0x3D4C++0x03
line.long 0x00 "CntOutOfSeqA,PRP Sequence Error LAN-A Count Register"
hexmask.long 0x00 0.--31. 1. "CntOutOfSeqA,Valid and accepted frames received on LAN A with an unexpected sequence number"
rgroup.long 0x3D50++0x03
line.long 0x00 "CntOutOfSeqB,PRP Sequence Error LAN-B Count Register"
hexmask.long 0x00 0.--31. 1. "CntOutOfSeqB,Valid and accepted frames received on LAN B with an unexpected sequence number"
rgroup.long 0x3D54++0x03
line.long 0x00 "CntAcceptA,PRP Valid Frame LAN-A Count Register"
hexmask.long 0x00 0.--31. 1. "CntAcceptA,Valid frames received on LAN A which had a valid sequence number in the expected range"
rgroup.long 0x3D58++0x03
line.long 0x00 "CntAcceptB,PRP Valid Frame LAN-B Count Register"
hexmask.long 0x00 0.--31. 1. "CntAcceptB,Valid frames received on LAN B which had a valid sequence number in the expected range"
rgroup.long 0x3D5C++0x03
line.long 0x00 "CntMissing,PRP Drop History Adjustment Count"
hexmask.long 0x00 0.--31. 1. "CntMissing,Indicates adjustment of the drop history as a frame was received with a sequence number of expected + history + 1"
group.long 0x3E00++0x03
line.long 0x00 "HUB_CONFIG,HUB Configuration Register"
bitfld.long 0x00 11. "JAM_WAIT_IDLE," "0,1"
newline
bitfld.long 0x00 10. "PRMB_GEN_DIS," "0,1"
newline
bitfld.long 0x00 9. "CRS_GEN," "0,1"
newline
bitfld.long 0x00 6.--8. "IPG_WAIT," "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4. "TIMER_SEL,Select the timer to use for timed triggers" "0: Timer 0,1: Timer 1"
newline
bitfld.long 0x00 3. "HUB_ISOLATE,Isolate all hub ports from the other ports of the switch and allow communication with management port only" "0,1"
newline
bitfld.long 0x00 2. "TRIGGER_MODE,Enable Single Frame Trigger Mode" "0,1"
newline
bitfld.long 0x00 1. "RETRANSMIT_ENA,Enable Hub Retransmit Capability" "0,1"
newline
bitfld.long 0x00 0. "HUB_ENA,Enable Integrated HUB Operation" "0,1"
group.long 0x3E04++0x03
line.long 0x00 "HUB_GROUP,HUB Port Group Register"
bitfld.long 0x00 0.--2. "HUB_GROUP,Define all ports that should be combined to a Hub Group" "0,1,2,3,4,5,6,7"
group.long 0x3E08++0x03
line.long 0x00 "HUB_DEFPORT,HUB Default Port Selection Register"
bitfld.long 0x00 0.--2. "HUB_DEFPORT,The default port within the Hub Group where all traffic from a port outside the group is forwarded to port (bit 0 = port 0 bit 1 = port 1 and bit 2 = port 2)" "0: port 0 bit,1: port 1 and bit,2: port 2). If a frame should be,?..."
group.long 0x3E0C++0x03
line.long 0x00 "HUB_TRIGGER_IMMEDIATE,HUB Transmission Trigger Immediate Register"
bitfld.long 0x00 0.--2. "HUB_TRIGGER_IMMEDIATE,Trigger immediate transmission of a single frame from given port within the hub group (bit 0 = port 0 bit 1 = port 1 and bit 2 = port 2)" "0: port 0 bit,1: port 1 and bit,2: port 2),?..."
group.long 0x3E10++0x03
line.long 0x00 "HUB_TRIGGER_AT,HUB Transmission Trigger At Register"
bitfld.long 0x00 0.--2. "HUB_TRIGGER_AT,Trigger Transmission of a Single Frame at a Specific Time (bit 0 = port 0 bit 1 = port 1 and bit 2 = port 2)" "0: port 0 bit,1: port 1 and bit,2: port 2),?..."
group.long 0x3E14++0x03
line.long 0x00 "HUB_TTIME,HUB Transmission Time Define Register"
hexmask.long 0x00 0.--31. 1. "HUB_TTIME,Define the Time Value when a Trigger Should Occur"
group.long 0x3E18++0x03
line.long 0x00 "HUB_IRQ_CONTROL,HUB Interrupt Control Register"
bitfld.long 0x00 5. "TRIGGER_TIMER,Enable interrupt when hub transmit started after writing the HUB_TRIGGER_TIME register and the timeout value is reached (register HUB_TTIME)" "0,1"
newline
bitfld.long 0x00 4. "TRIGGER_IMMEDIATE,Enable interrupt when hub transmit started after writing the HUB_TRIGGER_IMMEDIATE register" "0,1"
newline
bitfld.long 0x00 3. "CHANGE_DET,Enable interrupt for hub TX state machine port state change request detection" "0,1"
newline
bitfld.long 0x00 0.--2. "RX_TRIGGER,Enable Interrupt on Receive Pattern Match Trigger Function" "0,1,2,3,4,5,6,7"
group.long 0x3E1C++0x03
line.long 0x00 "HUB_IRQ_STAT_ACK,HUB Interrupt Status/ACK Register"
bitfld.long 0x00 5. "TRIGGER_TIMER,This bit functions the same as RX_TRIGGER bit" "0,1"
newline
bitfld.long 0x00 4. "TRIGGER_IMMEDIATE,This bit functions the same as RX_TRIGGER bit" "0,1"
newline
bitfld.long 0x00 3. "CHANGE_DET,This bit functions the same as RX_TRIGGER bit" "0,1"
newline
bitfld.long 0x00 0.--2. "RX_TRIGGER,Interrupt Pending Indication" "0,1,2,3,4,5,6,7"
rgroup.long 0x3E20++0x03
line.long 0x00 "HUB_STATUS,HUB Status Register"
bitfld.long 0x00 12. "TX_Change_Pending,Indicate a pending change request in the hub transmitter that is unsolved and cause the hub to stop operation (no longer performing any transmissions)" "0,1"
newline
bitfld.long 0x00 11. "Speed_OK,When this bit is 1 it indicates that the port speed of all group ports match" "0,1"
newline
bitfld.long 0x00 10. "TX_BUSY,When this bit is 1 the local device currently transmits data to all ports within the hub group" "0,1"
newline
bitfld.long 0x00 9. "TX_ACTIVE,When this bit is 1 the hub global transmit state machine has successfully entered Hub mode and is now controlling the hub group" "0,1"
newline
bitfld.long 0x00 0.--2. "PORTS_ACTIVE,When this bit is 1 it shows the currently active ports of the Hub group which are allowed for transmit" "0,1,2,3,4,5,6,7"
rgroup.long 0x3E24++0x03
line.long 0x00 "HUB_OPORT_STATUS,HUB Output Port Status Register"
bitfld.long 0x00 0.--2. "HUB_OPORT_STATUS,Per Output Port Data Available Status" "0,1,2,3,4,5,6,7"
group.long 0x3E80++0x03
line.long 0x00 "TDMA_CONFIG,TDMA Configuration Register"
bitfld.long 0x00 24.--27. "OUT_CT_ENA,On read return the current status of the egress Cut-Through enable indicated by the TDMA scheduler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 16.--19. "IN_CT_ENA,On read return the current status of the ingress Cut-Through enable indicated by the TDMA scheduler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 12. "TIMER_SEL_ACTIVE,Return the current timer being used for the TDMA Scheduler" "0: Timer 0,1: Timer 1"
newline
bitfld.long 0x00 9. "HOLD_REQ_CLR,Writing 1 to this register clears the state of TDMA hold request" "0,1"
newline
bitfld.long 0x00 8. "OUT_CT_WREN,Enable writing the OUT_CT_ENA control to the egress ports" "0,1"
newline
bitfld.long 0x00 7. "IN_CT_WREN," "0,1"
newline
bitfld.long 0x00 6. "RED_OVRD,Override Value for the RED Period" "0,1"
newline
bitfld.long 0x00 5. "RED_OVRD_ENA,Enables overriding the RED period status regardless of the indication by the TCV" "0,1"
newline
rbitfld.long 0x00 4. "RED_PERIOD,Read only bit indicating the current period for Profinet" "0,1"
newline
bitfld.long 0x00 2. "TIMER_SEL,Select which timer to use as the time source for the scheduler" "0: Timer 0,1: Timer 1"
newline
rbitfld.long 0x00 1. "WAIT_START,Status bit which is set as long as the scheduler is enabled but has not yet reached the time given in register TDMA_START" "0,1"
newline
bitfld.long 0x00 0. "TDMA_ENA,Enable TDMA Scheduler" "0,1"
group.long 0x3E84++0x03
line.long 0x00 "TDMA_ENA_CTRL,TDMA Scheduling Enable Control Register"
hexmask.long.byte 0x00 24.--31. 1. "QTRIG_DIS,One bit per output queue"
newline
hexmask.long.byte 0x00 16.--23. 1. "QGATE_DIS,One bit per output queue"
newline
bitfld.long 0x00 0.--3. "PORT_ENA,Set to 1 to indicate that a port is operating in TDMA mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x3E88++0x03
line.long 0x00 "TDMA_START,TDMA Start Time Set Register"
hexmask.long 0x00 0.--31. 1. "TDMA_START,Set the start time for the very first cycle after system initialization has completed"
group.long 0x3E8C++0x03
line.long 0x00 "TDMA_MODULO,TDMA System Timer Modulo"
hexmask.long 0x00 0.--31. 1. "TDMA_MODULO,The System Timer Modulo"
group.long 0x3E90++0x03
line.long 0x00 "TDMA_CYCLE,TDMA Periodic Cycle Set Register"
hexmask.long 0x00 0.--31. 1. "TDMA_CYCLE,The periodic cycle time for the scheduler given in system timer time"
group.long 0x3E94++0x03
line.long 0x00 "TCV_SEQ_ADDR,TCV Sequence Address Register"
bitfld.long 0x00 31. "ADDR_AINC,When set to 1 read and write operations performed using TCV_SEQ_CTRL causes the address in TCV_S_ADDR to auto-increment after the operation" "0,1"
newline
hexmask.long.word 0x00 0.--11. 1. "TCV_S_ADDR,Address to write to or read from in the TCV sequence table"
group.long 0x3E98++0x03
line.long 0x00 "TCV_SEQ_CTRL,TCV Sequence Table Control Register"
bitfld.long 0x00 31. "READ_MODE,When set to 1 a read operation is performed instead of writing to the TCV sequence table" "0,1"
newline
hexmask.long.byte 0x00 22.--29. 1. "GPIO,Generic bits that control the output pins ETHSW_TDMAOUTn (n = 0 to 7)"
newline
hexmask.long.word 0x00 2.--10. 1. "TCV_D_IDX,Index to the TCV Data Entry"
newline
bitfld.long 0x00 1. "INT,Indicates this TCV generates an interrupt to the CPU when activated" "0,1"
newline
bitfld.long 0x00 0. "START,Indicate this TCV must be executed after the next cycle start" "0,1"
group.long 0x3E9C++0x03
line.long 0x00 "TCV_SEQ_LAST,TCV Sequence Last Entry"
hexmask.long.word 0x00 16.--27. 1. "ACTIVE,Return the active TCV sequence entry"
newline
hexmask.long.word 0x00 0.--11. 1. "LAST,Defines the last entry to read from the TCV sequence table when the TDMA scheduler is operating"
group.long 0x3EA0++0x03
line.long 0x00 "TCV_D_ADDR,TCV Data Address Register"
bitfld.long 0x00 31. "AINC_WR_ENA,Auto-Increment Enable" "0,1"
newline
hexmask.long.word 0x00 0.--8. 1. "ADDR,Address to read from/write to in the TCV data table"
group.long 0x3EA4++0x03
line.long 0x00 "TCV_D_OFFSET,TCV Data Offset Register"
hexmask.long 0x00 0.--31. 1. "TCV_D_OFFSET,32-bit time offset for the TCV data entry indicated by TCV_D_ADDR"
group.long 0x3EA8++0x03
line.long 0x00 "TCV_D_CTRL,TCV Data Control Register"
bitfld.long 0x00 16.--19. "PMASK,Bits mask one per output port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x00 8.--15. 1. "QGATE,Bits mask one per output queue"
newline
bitfld.long 0x00 7. "HOLD_REQ,Preemption hold request" "0,1"
newline
bitfld.long 0x00 6. "GATE_MODE,Gate mode enable when set to 1" "0,1"
newline
bitfld.long 0x00 5. "TRIGGER_MODE,Trigger mode enable when set to 1" "0,1"
newline
bitfld.long 0x00 4. "IN_CT_ENA,Input Cut-Through Enable" "0,1"
newline
bitfld.long 0x00 3. "OUT_CT_ENA,Output Cut-Through Enable" "0,1"
newline
bitfld.long 0x00 2. "RED_PERIOD,Period Color Control (for Profinet IRT)" "0,1"
newline
bitfld.long 0x00 1. "INC_CTR1,Increment Control for Counter 1" "0,1"
newline
bitfld.long 0x00 0. "INC_CTR0,Increment Control for Counter 0" "0,1"
group.long 0x3EAC++0x03
line.long 0x00 "TDMA_CTR0,TDMA Counter 0"
hexmask.long 0x00 0.--31. 1. "TDMA_CTR0,32-bit counter that is incremented when the TCV field INC_CTR0 is set to 1"
group.long 0x3EB0++0x03
line.long 0x00 "TDMA_CTR1,TDMA Counter 1"
hexmask.long.byte 0x00 24.--31. 1. "INT_VALUE,Interrupt Value"
newline
hexmask.long.byte 0x00 16.--23. 1. "MAX,Counter Maximum Value"
newline
bitfld.long 0x00 8. "WRITE_ENA,Write Enable for VALUE" "0,1"
newline
hexmask.long.byte 0x00 0.--7. 1. "VALUE,Current Counter Value"
group.long 0x3EB4++0x03
line.long 0x00 "TDMA_TCV_START,TDMA TCV Sequence Entry Start"
hexmask.long.word 0x00 0.--11. 1. "TDMA_TCV_START,Define the TCV_SEQ entry to start from"
rgroup.long 0x3EB8++0x03
line.long 0x00 "TIME_LOAD_NEXT,TDMA Calculated Next Loading Time"
hexmask.long 0x00 0.--31. 1. "TIME_LOAD_NEXT,Status giving the calculated time the scheduler loads into its internal compare register after the current running slot end is reached (not the end of the current slot)"
group.long 0x3EBC++0x03
line.long 0x00 "TDMA_IRQ_CONTROL,TDMA IRQ Control Register"
bitfld.long 0x00 13. "CTR1_INT_EN,Enable Interrupts Generated from Counter 1" "0,1"
newline
bitfld.long 0x00 0. "TCV_INT_EN,Enable Interrupts Generated by the TCV" "0,1"
group.long 0x3EC0++0x03
line.long 0x00 "TDMA_IRQ_STAT_ACK,TDMA IRQ Status/ACK Register"
bitfld.long 0x00 13. "CTR1_ACK,Counter 1 Event" "0,1"
newline
bitfld.long 0x00 0. "TCV_ACK,TCV Execution Event" "0,1"
group.long 0x3EC4++0x03
line.long 0x00 "TDMA_GPIO,TDMA GPIO Register"
hexmask.long.word 0x00 16.--31. 1. "GPIO_MODE,2 bits per GPIO pin to configure its operating mode"
newline
hexmask.long.byte 0x00 0.--7. 1. "GPIO_STATUS,Status of the GPIO Output Pins"
group.long 0x3F00++0x03
line.long 0x00 "RXMATCH_CONFIGn,RX Pattern Matcher Configuration for Port n (n = 0 to 3)"
hexmask.long.word 0x00 0.--11. 1. "PATTERN_EN,Enable Patterns on the Port (RX)"
group.long 0x3F40++0x03
line.long 0x00 "PATTERN_CTRLn,RX Pattern Matcher Function Control for Pattern n (n = 0 to 11)"
bitfld.long 0x00 28.--31. "QUEUESEL,A queue selector for the HUBTRIGGER function" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 26. "TIMER_SEL,Override value to use when TIMER_SEL_OVR is set to 1 for selecting the timer for this frame" "0: Timer 0,1: Timer 1"
newline
bitfld.long 0x00 25. "MATCH_LT,For operating modes 1 2 and 3" "0,1"
newline
bitfld.long 0x00 24. "SWAP_BYTES,Applicable only for operating modes 1 2 and 3" "0,1"
newline
bitfld.long 0x00 23. "IMC_TRIGGER_DLY,When set the ports defined in the PORTMASK setting are allowed for transmitting one frame from the queues indicated by QUEUESEL" "0,1"
newline
bitfld.long 0x00 22. "IMC_TRIGGER,When set the ports defined in the PORTMASK setting are allowed for transmitting one frame from the queues indicated by QUEUESEL" "0,1"
newline
bitfld.long 0x00 16.--19. "PORTMASK,A port mask used depending on the control bits (for example HUBTRIGGER)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 15. "LEARNING_DIS,When set to 1 the hardware learning function is not executed" "0,1"
newline
bitfld.long 0x00 12.--14. "PRIORITY,Priority of the frame used when SET_PRIO is set" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 11. "VLAN_SKIP,When set to 1 for operating modes 1 2 and 3" "0,1"
newline
bitfld.long 0x00 10. "MATCH_NOT_RED,Enable the pattern matcher only when the TDMA indicates that this is not the RED period" "0,1"
newline
bitfld.long 0x00 9. "MATCH_RED,Enable the pattern matcher only when the TDMA indicates that this is the RED period" "0,1"
newline
bitfld.long 0x00 8. "HUBTRIGGER,When set the port defined in the PORTMASK setting is allowed for transmitting one frame" "0,1"
newline
bitfld.long 0x00 7. "FORCE_FORWARD,When set the frame is forwarded to the ports indicated in PORTMASK ignoring the result from L2 lookups" "0,1"
newline
bitfld.long 0x00 6. "TIMER_SEL_OVR,Overrides the default timer to use by timestamp operations when set to 1 using instead the value in TIMER_SEL" "0,1"
newline
bitfld.long 0x00 4.--5. "MODE,Selects the operating mode" "0: Mode 1,1: Mode 2,2: Mode 3,3: Mode 4"
newline
bitfld.long 0x00 3. "SET_PRIO,Set frame priority overriding normal classification" "0,1"
newline
bitfld.long 0x00 2. "DISCARD,When set the frame is discarded" "0,1"
newline
bitfld.long 0x00 1. "MGMTFWD,When set the frame is forwarded to the management port only (suppressing destination address lookup)" "0,1"
newline
bitfld.long 0x00 0. "MATCH_NOT,When set a match is reported and the functions of this control are executed if the pattern does not match" "0,1"
group.long 0x3F80++0x03
line.long 0x00 "PATTERN_IRQ_CONTROL,RX Pattern Matcher Interrupt Control Register"
bitfld.long 0x00 16.--19. "ERROR_INT,Enable Interrupt on Internal Pattern Matcher Error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--11. 1. "MATCHINT,Enable Interrupt on Receive Pattern Match"
group.long 0x3F84++0x03
line.long 0x00 "PATTERN_IRQ_STAT_ACK,RX Pattern Matcher Interrupt Status/ACK Register"
bitfld.long 0x00 16.--19. "ERROR_INT,Interrupt pending indication for a pattern matcher error per port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--11. 1. "MATCHINT,Interrupt pending indication for the corresponding pattern match events (see )"
group.long 0x3F88++0x03
line.long 0x00 "PTRN_VLANID,Custom VLAN ID Register"
hexmask.long.word 0x00 0.--15. 1. "PTRN_VLANID,Custom VLAN ID to use"
group.long 0x3F8C++0x03
line.long 0x00 "PATTERN_SEL,RX Pattern Number Selection Register"
bitfld.long 0x00 0.--3. "PATTERN_SEL,Define the pattern number which is selected for read/write through the PTRN_CMP_* and PTRN_MSK_* registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x3FC0++0x03
line.long 0x00 "PTRN_CMP_30,Pattern Compare Value Bytes 3"
hexmask.long 0x00 0.--31. 1. "PTRN_CMP_30,Pattern Compare Value Bytes 3"
group.long 0x3FC4++0x03
line.long 0x00 "PTRN_CMP_74,Pattern Compare Value Bytes 7"
hexmask.long 0x00 0.--31. 1. "PTRN_CMP_74,Pattern Compare Value Bytes 7"
group.long 0x3FC8++0x03
line.long 0x00 "PTRN_CMP_118,Pattern Compare Value Bytes 11"
hexmask.long 0x00 0.--31. 1. "PTRN_CMP_118,Pattern Compare Value Bytes 11"
group.long 0x3FD0++0x03
line.long 0x00 "PTRN_MSK_30,Pattern Mask for Bytes 3"
hexmask.long 0x00 0.--31. 1. "PTRN_MSK_30,"
group.long 0x3FD4++0x03
line.long 0x00 "PTRN_MSK_74,Pattern Mask for Bytes 7"
hexmask.long 0x00 0.--31. 1. "PTRN_MSK_74,"
group.long 0x3FD8++0x03
line.long 0x00 "PTRN_MSK_118,Pattern Mask for Bytes 11"
hexmask.long 0x00 0.--31. 1. "PTRN_MSK_118,"
tree.end
tree "ETHSW_PTP (Ethernet Switch for PTP)"
base ad:0x80110400
group.long 0x04++0x03
line.long 0x00 "SWPTPOUTSEL,ETHSW_PTPOUT Select Register"
bitfld.long 0x00 7. "EVTSEL3,Select the source of the ETHSW_PTPOUT3 event for GIC DMAC and ELC" "0: Pulse generator 3 output,1: TDMA_GPIO[7] output"
bitfld.long 0x00 6. "EVTSEL2,Select the source of the ETHSW_PTPOUT2 event for GIC DMAC and ELC" "0: Pulse generator 2 output,1: TDMA_GPIO[6] output"
bitfld.long 0x00 5. "EVTSEL1,Select the source of the ETHSW_PTPOUT1 event for GIC DMAC and ELC" "0: Pulse generator 1 output,1: TDMA_GPIO[5] output"
bitfld.long 0x00 4. "EVTSEL0,Select the source of the ETHSW_PTPOUT0 event for GIC DMAC and ELC" "0: Pulse generator 0 output,1: TDMA_GPIO[4] output"
newline
bitfld.long 0x00 3. "IOSEL3,Select the source of the ETHSW_PTPOUT3 output signal" "0: Pulse generator 3 output,1: TDMA_GPIO[7] output"
bitfld.long 0x00 2. "IOSEL2,Select the source of the ETHSW_PTPOUT2 output signal" "0: Pulse generator 2 output,1: TDMA_GPIO[6] output"
bitfld.long 0x00 1. "IOSEL1,Select the source of the ETHSW_PTPOUT1 output signal" "0: Pulse generator 1 output,1: TDMA_GPIO[5] output"
bitfld.long 0x00 0. "IOSEL0,Select the source of the ETHSW_PTPOUT0 output signal" "0: Pulse generator 0 output,1: TDMA_GPIO[4] output"
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x400)++0x03
line.long 0x00 "SWTMEN$1,PTP Timer Pulse Output Enable"
bitfld.long 0x00 0. "OUTEN,Enable ETHSW_PTPOUTn Signal Output" "0: Disabled,1: Enabled"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x404)++0x03
line.long 0x00 "SWTMSTSEC$1,PTP Timer Pulse Start Second"
hexmask.long 0x00 0.--31. 1. "STSEC,"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x408)++0x03
line.long 0x00 "SWTMSTNS$1,PTP Timer Pulse Start Nanosecond"
hexmask.long 0x00 0.--31. 1. "STNS,Start Time by Nanosecond"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x40C)++0x03
line.long 0x00 "SWTMPSEC$1,PTP Timer Pulse Period Second"
hexmask.long 0x00 0.--31. 1. "PSEC,"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x410)++0x03
line.long 0x00 "SWTMPNS$1,PTP Timer Pulse Period Nanosecond"
hexmask.long 0x00 0.--31. 1. "PNS,Period by Nanosecond"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x414)++0x03
line.long 0x00 "SWTMWTH$1,PTP Timer Pulse Width"
hexmask.long.word 0x00 0.--15. 1. "WIDTH,Set the Pulse Width of ETHSW_PTPOUTn in the cycle number of ts_clk (8 ns)"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x418)++0x03
line.long 0x00 "SWTMMAXP$1,PTP Timer Pulse Max Nanosecond"
hexmask.long 0x00 0.--31. 1. "MAXP,Sets the boundary value in nanoseconds to carry from the nanosecond field to the second field"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x41C)++0x03
line.long 0x00 "SWTMLATSEC$1,PTP Timer Pulse Latch Second"
hexmask.long 0x00 0.--31. 1. "LATSEC,"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x100 0x200 0x300 )
group.long ($2+0x420)++0x03
line.long 0x00 "SWTMLATNS$1,PTP Timer Pulse Latch Nanosecond"
hexmask.long 0x00 0.--31. 1. "LATNS,"
repeat.end
tree.end
tree "GMAC (Ethernet MAC)"
base ad:0x80100000
group.long 0x00++0x03
line.long 0x00 "MAC_Configuration,MAC Configuration Register"
bitfld.long 0x00 27. "TWOKPE,IEEE 802.3 as Support for 2 K Packets" "0,1"
newline
bitfld.long 0x00 25. "CST,CRC Stripping for Type Frames" "0,1"
newline
bitfld.long 0x00 23. "WD,Watchdog Disable" "0,1"
newline
bitfld.long 0x00 22. "JD,Jabber Disable" "0,1"
newline
bitfld.long 0x00 21. "BE,Frame Burst Enable" "0,1"
newline
bitfld.long 0x00 20. "JE,Jumbo Frame Enable" "0,1"
newline
bitfld.long 0x00 17.--19. "IFG,Inter-Frame Gap" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16. "DCRS,Disable Carrier Sense During Transmission" "0,1"
newline
bitfld.long 0x00 15. "PS,Port Select" "0: For 1000 Mbps operations,1: For 10 or 100 Mbps operations"
newline
bitfld.long 0x00 14. "FES,Speed" "0: 10 Mbps,1: 100 Mbps"
newline
bitfld.long 0x00 13. "DO,Disable Receive Own" "0,1"
newline
bitfld.long 0x00 12. "LM,Loopback Mode" "0,1"
newline
bitfld.long 0x00 11. "DM,Duplex Mode" "0,1"
newline
bitfld.long 0x00 10. "IPC,Checksum Offload" "0,1"
newline
bitfld.long 0x00 9. "DR,Disable Retry" "0,1"
newline
bitfld.long 0x00 7. "ACS,Automatic Pad or CRC Stripping" "0,1"
newline
bitfld.long 0x00 5.--6. "BL,Back-Off Limit" "0: k = min (n 10),1: k = min (n 8),2: k = min (n 4),3: k = min (n 1)"
newline
bitfld.long 0x00 4. "DC,Deferral Check" "0,1"
newline
bitfld.long 0x00 3. "TE,Transmitter Enable" "0,1"
newline
bitfld.long 0x00 2. "RE,Receiver Enable" "0,1"
newline
bitfld.long 0x00 0.--1. "PRELEN,Preamble Length for Transmit Frames" "0: 7 bytes of preamble,1: 5 bytes of preamble,2: 3 bytes of preamble,3: Reserved"
group.long 0x04++0x03
line.long 0x00 "MAC_Frame_Filter,MAC Frame Filter Register"
bitfld.long 0x00 31. "RA,Receive All" "0,1"
newline
bitfld.long 0x00 16. "VTFE,VLAN Tag Filter Enable" "0,1"
newline
bitfld.long 0x00 10. "HPF,Hash or Perfect Filter" "0,1"
newline
bitfld.long 0x00 9. "SAF,Source Address Filter Enable" "0,1"
newline
bitfld.long 0x00 8. "SAIF,SA Inverse Filtering" "0,1"
newline
bitfld.long 0x00 6.--7. "PCF,Pass Control Frames" "0: GMAC filters all control frames from reaching..,1: GMAC forwards all control frames except PAUSE..,2: GMAC forwards all control frames to..,3: GMAC forwards control frames that pass the.."
newline
bitfld.long 0x00 5. "DBF,Disable Broadcast Frames" "0,1"
newline
bitfld.long 0x00 4. "PM,Pass All Multicast" "0,1"
newline
bitfld.long 0x00 3. "DAIF,DA Inverse Filtering" "0,1"
newline
bitfld.long 0x00 2. "HMC,Hash Multicast" "0,1"
newline
bitfld.long 0x00 1. "HUC,Hash Unicast" "0,1"
newline
bitfld.long 0x00 0. "PR,Promiscuous Mode" "0,1"
group.long 0x10++0x03
line.long 0x00 "GMII_Address,GMII Address Register"
bitfld.long 0x00 11.--15. "PA,Physical Layer Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 6.--10. "GR,GMII Register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 2.--5. "CR,CSR Clock Range" "0: The frequency of the CSR clock is 60-100 MHz..,1: The frequency of the CSR clock is 100-150 MHz..,2: The frequency of the CSR clock is 20-35 MHz..,3: The frequency of the CSR clock is 35-60 MHz..,4: The frequency of the CSR clock is 150-250 MHz..,5: The frequency of the CSR clock is 250-300 MHz..,6: Reserved,7: Reserved,?..."
newline
bitfld.long 0x00 1. "GW,GMII" "0,1"
newline
bitfld.long 0x00 0. "GB,GMII Busy" "0,1"
group.long 0x14++0x03
line.long 0x00 "GMII_Data,GMII Data Register"
hexmask.long.word 0x00 0.--15. 1. "GD,GMII Data"
group.long 0x18++0x03
line.long 0x00 "Flow_Control,Flow Control Register"
hexmask.long.word 0x00 16.--31. 1. "PT,Pause Time"
newline
bitfld.long 0x00 7. "DZPQ,Disable Zero-Quanta Pause" "0,1"
newline
bitfld.long 0x00 4.--5. "PLT,Pause Low Threshold" "0: The threshold is Pause time minus 4 slot..,1: The threshold is Pause time minus 28 slot..,2: The threshold is Pause time minus 144 slot..,3: The threshold is Pause time minus 256 slot.."
newline
bitfld.long 0x00 3. "UP,Unicast Pause Frame Detect" "0,1"
newline
bitfld.long 0x00 2. "RFE,Receive Flow Control Enable" "0,1"
newline
bitfld.long 0x00 1. "TFE,Transmit Flow Control Enable" "0,1"
newline
bitfld.long 0x00 0. "FCA_BPA,Flow Control Busy or Backpressure Activate" "0,1"
group.long 0x1C++0x03
line.long 0x00 "VLAN_Tag,VLAN Tag Register"
bitfld.long 0x00 19. "VTHM,VLAN Tag Hash Table Match Enable" "0,1"
newline
bitfld.long 0x00 18. "ESVL,Enable S-VLAN" "0,1"
newline
bitfld.long 0x00 17. "VTIM,VLAN Tag Inverse Match Enable" "0,1"
newline
bitfld.long 0x00 16. "ETV,Enable 12-Bit VLAN Tag Comparison" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. "VL,VLAN Tag Identifier for Receive Frames"
rgroup.long 0x20++0x03
line.long 0x00 "Version,Version Register"
hexmask.long.word 0x00 0.--15. 1. "VER,Version (GMAC: 0x3037)"
rgroup.long 0x24++0x03
line.long 0x00 "Debug,Debug Register"
bitfld.long 0x00 25. "TXSTSFSTS,MTL TX Status FIFO Full Status" "0,1"
newline
bitfld.long 0x00 24. "TXFSTS,MTL TX FIFO Not Empty Status" "0,1"
newline
bitfld.long 0x00 22. "TWCSTS,MTL TX FIFO Write Controller Active Status" "0,1"
newline
bitfld.long 0x00 20.--21. "TRCSTS,MTL TX FIFO Read Controller Status" "0: IDLE state,1: READ state (transferring data to GMAC..,2: Waiting for TX status from GMAC transmitter,3: Writing the received TX status or flushing.."
newline
bitfld.long 0x00 19. "TXPAUSED,GMAC transmitter in PAUSE" "0,1"
newline
bitfld.long 0x00 17.--18. "TFCSTS,GMAC Transmit Frame Controller Status" "0: IDLE state,1: Waiting for status of previous frame or IFG..,2: Generating and transmitting a Pause control..,3: Transferring input frame for transmission"
newline
bitfld.long 0x00 16. "TPESTS,GMAC GMII or MII Transmit Protocol Engine Status" "0,1"
newline
bitfld.long 0x00 8.--9. "RXFSTS,MTL RX FIFO Fill-level Status" "0: RX FIFO Empty,1: RX FIFO fill level is below the flow-control..,2: RX FIFO fill level is above the flow-control..,3: RX FIFO Full"
newline
bitfld.long 0x00 5.--6. "RRCSTS,MTL RX FIFO Read Controller State" "0: IDLE state,1: Reading frame data,2: Reading frame status (or timestamp),3: Flushing the frame data and status"
newline
bitfld.long 0x00 4. "RWCSTS,MTL RX FIFO Write Controller Active Status" "0,1"
newline
bitfld.long 0x00 1.--2. "RFCFCSTS,GMAC Receive Frame Controller FIFO Status" "0,1,2,3"
newline
bitfld.long 0x00 0. "RPESTS,GMAC GMII or MII Receive Protocol Engine Status" "0,1"
group.long 0x28++0x03
line.long 0x00 "Remote_Wake_Up_Frame_Filter,Remote Wake-Up Frame Filter Register"
hexmask.long 0x00 0.--31. 1. "WKUPFRMFTR,Remote Wake-Up Frame Filter"
group.long 0x2C++0x03
line.long 0x00 "PMT_Control_Status,PMT Control and Status Register"
bitfld.long 0x00 31. "RWKFILTRST,Wake-Up Frame Filter Register Pointer Reset" "0,1"
newline
rbitfld.long 0x00 24.--26. "RWKPTR,Remote Wake-Up FIFO Pointer" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9. "GLBLUCAST,Global Unicast" "0,1"
newline
rbitfld.long 0x00 6. "RWKPRCVD,Wake-Up Frame Received" "0,1"
newline
rbitfld.long 0x00 5. "MGKPRCVD,Magic Packet Received" "0,1"
newline
bitfld.long 0x00 2. "RWKPKTEN,Wake-Up Frame Enable" "0,1"
newline
bitfld.long 0x00 1. "MGKPKTEN,Magic Packet Enable" "0,1"
newline
bitfld.long 0x00 0. "PWRDWN,Power Down" "0,1"
group.long 0x30++0x03
line.long 0x00 "LPI_Control_Status,LPI Control and Status Register"
bitfld.long 0x00 19. "LPITXA,LPI TX Automate" "0,1"
newline
bitfld.long 0x00 17. "PLS,PHY Link Status" "0,1"
newline
bitfld.long 0x00 16. "LPIEN,LPI Enable" "0,1"
newline
rbitfld.long 0x00 9. "RLPIST,Receive LPI State" "0,1"
newline
rbitfld.long 0x00 8. "TLPIST,Transmit LPI State" "0,1"
newline
rbitfld.long 0x00 3. "RLPIEX,Receive LPI Exit" "0,1"
newline
rbitfld.long 0x00 2. "RLPIEN,Receive LPI Entry" "0,1"
newline
rbitfld.long 0x00 1. "TLPIEX,Transmit LPI Exit" "0,1"
newline
rbitfld.long 0x00 0. "TLPIEN,Transmit LPI Entry" "0,1"
group.long 0x34++0x03
line.long 0x00 "LPI_Timers_Control,LPI Timers Control Register"
hexmask.long.word 0x00 16.--25. 1. "LST,LPI LS Timer"
newline
hexmask.long.word 0x00 0.--15. 1. "TWT,LPI TW Timer"
rgroup.long 0x38++0x03
line.long 0x00 "Interrupt_Status,Interrupt Status Register"
bitfld.long 0x00 10. "LPIIS,LPI Interrupt Status" "0,1"
newline
bitfld.long 0x00 9. "TSIS,Timestamp Interrupt Status" "0,1"
newline
bitfld.long 0x00 7. "MMCRXIPIS,MMC Receive Checksum Offload Interrupt Status" "0,1"
newline
bitfld.long 0x00 6. "MMCTXIS,MMC Transmit Interrupt Status" "0,1"
newline
bitfld.long 0x00 5. "MMCRXIS,MMC Receive Interrupt Status" "0,1"
newline
bitfld.long 0x00 4. "MMCIS,MMC Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "PMTIS,PMT Interrupt Status" "0,1"
group.long 0x3C++0x03
line.long 0x00 "Interrupt_Mask,Interrupt Mask Register"
bitfld.long 0x00 10. "LPIIM,LPI Interrupt Mask" "0,1"
newline
bitfld.long 0x00 9. "TSIM,Timestamp Interrupt Mask" "0,1"
newline
bitfld.long 0x00 3. "PMTIM,PMT Interrupt Mask" "0,1"
group.long 0x40++0x03
line.long 0x00 "MAR0_H,MAC Address 0 High Register"
rbitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address0[47:32]"
group.long 0x44++0x03
line.long 0x00 "MAR0_L,MAC Address 0 Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address0[31:0]"
group.long 0x48++0x03
line.long 0x00 "MAR_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x50++0x03
line.long 0x00 "MAR1_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x58++0x03
line.long 0x00 "MAR2_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x60++0x03
line.long 0x00 "MAR3_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x68++0x03
line.long 0x00 "MAR4_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x70++0x03
line.long 0x00 "MAR5_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x78++0x03
line.long 0x00 "MAR6_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x80++0x03
line.long 0x00 "MAR7_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x88++0x03
line.long 0x00 "MAR8_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x90++0x03
line.long 0x00 "MAR9_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x98++0x03
line.long 0x00 "MAR10_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0xA0++0x03
line.long 0x00 "MAR11_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0xA8++0x03
line.long 0x00 "MAR12_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0xB0++0x03
line.long 0x00 "MAR13_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0xB8++0x03
line.long 0x00 "MAR14_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x4C++0x03
line.long 0x00 "MAR_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x54++0x03
line.long 0x00 "MAR1_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x5C++0x03
line.long 0x00 "MAR2_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x64++0x03
line.long 0x00 "MAR3_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x6C++0x03
line.long 0x00 "MAR4_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x74++0x03
line.long 0x00 "MAR5_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x7C++0x03
line.long 0x00 "MAR6_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x84++0x03
line.long 0x00 "MAR7_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x8C++0x03
line.long 0x00 "MAR8_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x94++0x03
line.long 0x00 "MAR9_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x9C++0x03
line.long 0x00 "MAR10_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0xA4++0x03
line.long 0x00 "MAR11_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0xAC++0x03
line.long 0x00 "MAR12_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0xB4++0x03
line.long 0x00 "MAR13_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0xBC++0x03
line.long 0x00 "MAR14_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0xDC++0x03
line.long 0x00 "WDog_Timeout,Watchdog Timeout Register"
bitfld.long 0x00 16. "PWE,Programmable Watchdog Enable" "0,1"
newline
hexmask.long.word 0x00 0.--13. 1. "WTO,Watchdog Timeout"
group.long 0x100++0x03
line.long 0x00 "MMC_Control,MMC Control Register"
bitfld.long 0x00 8. "UCDBC,Update MMC Counters for Dropped Broadcast Frames" "0,1"
newline
bitfld.long 0x00 5. "CNTPRSTLVL,Full-Half Preset" "0,1"
newline
bitfld.long 0x00 4. "CNTPRST,Counters Preset" "0,1"
newline
bitfld.long 0x00 3. "CNTFREEZ,MMC Counter Freeze" "0,1"
newline
bitfld.long 0x00 2. "RSTONRD,Reset on Read" "0,1"
newline
bitfld.long 0x00 1. "CNTSTOPRO,Counters Stop Rollover" "0,1"
newline
bitfld.long 0x00 0. "CNTRST,Counters Reset" "0,1"
rgroup.long 0x104++0x03
line.long 0x00 "MMC_Receive_Interrupt,MMC Receive Interrupt Register"
bitfld.long 0x00 25. "RXCTRLFIS,MMC Receive Control Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 24. "RXRCVERRFIS,MMC Receive Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 23. "RXWDOGFIS,MMC Receive Watchdog Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 22. "RXVLANGBFIS,MMC Receive VLAN Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 21. "RXFOVFIS,MMC Receive FIFO Overflow Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 20. "RXPAUSFIS,MMC Receive Pause Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 19. "RXORANGEFIS,MMC Receive Out Of Range Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 18. "RXLENERFIS,MMC Receive Length Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 17. "RXUCGFIS,MMC Receive Unicast Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 16. "RX1024TMAXOCTGBFIS,MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 15. "RX512T1023OCTGBFIS,MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 14. "RX256T511OCTGBFIS,MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 13. "RX128T255OCTGBFIS,MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 12. "RX65T127OCTGBFIS,MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 11. "RX64OCTGBFIS,MMC Receive 64 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 10. "RXOSIZEGFIS,MMC Receive Oversize Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 9. "RXUSIZEGFIS,MMC Receive Undersize Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 8. "RXJABERFIS,MMC Receive Jabber Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 7. "RXRUNTFIS,MMC Receive Runt Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 6. "RXALGNERFIS,MMC Receive Alignment Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 5. "RXCRCERFIS,MMC Receive CRC Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 4. "RXMCGFIS,MMC Receive Multicast Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "RXBCGFIS,MMC Receive Broadcast Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 2. "RXGOCTIS,MMC Receive Good Octet Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 1. "RXGBOCTIS,MMC Receive Good Bad Octet Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 0. "RXGBFRMIS,MMC Receive Good Bad Frame Counter Interrupt Status" "0,1"
rgroup.long 0x108++0x03
line.long 0x00 "MMC_Transmit_Interrupt,MMC Transmit Interrupt Register"
bitfld.long 0x00 25. "TXOSIZEGFIS,MMC Transmit Oversize Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 24. "TXVLANGFIS,MMC Transmit VLAN Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 23. "TXPAUSFIS,MMC Transmit Pause Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 22. "TXEXDEFFIS,MMC Transmit Excessive Deferral Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 21. "TXGFRMIS,MMC Transmit Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 20. "TXGOCTIS,MMC Transmit Good Octet Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 19. "TXCARERFIS,MMC Transmit Carrier Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 18. "TXEXCOLFIS,MMC Transmit Excessive Collision Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 17. "TXLATCOLFIS,MMC Transmit Late Collision Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 16. "TXDEFFIS,MMC Transmit Deferred Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 15. "TXMCOLGFIS,MMC Transmit Multiple Collision Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 14. "TXSCOLGFIS,MMC Transmit Single Collision Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 13. "TXUFLOWERFIS,MMC Transmit Underflow Error Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 12. "TXBCGBFIS,MMC Transmit Broadcast Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 11. "TXMCGBFIS,MMC Transmit Multicast Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 10. "TXUCGBFIS,MMC Transmit Unicast Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 9. "TX1024TMAXOCTGBFIS,MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 8. "TX512T1023OCTGBFIS,MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 7. "TX256T511OCTGBFIS,MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 6. "TX128T255OCTGBFIS,MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 5. "TX65T127OCTGBFIS,MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 4. "TX64OCTGBFIS,MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 3. "TXMCGFIS,MMC Transmit Multicast Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 2. "TXBCGFIS,MMC Transmit Broadcast Good Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 1. "TXGBFRMIS,MMC Transmit Good Bad Frame Counter Interrupt Status" "0,1"
newline
bitfld.long 0x00 0. "TXGBOCTIS,MMC Transmit Good Bad Octet Counter Interrupt Status" "0,1"
group.long 0x10C++0x03
line.long 0x00 "MMC_Receive_Interrupt_Mask,MMC Receive Interrupt Mask Register"
bitfld.long 0x00 25. "RXCTRLFIM,MMC Receive Control Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 24. "RXRCVERRFIM,MMC Receive Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 23. "RXWDOGFIM,MMC Receive Watchdog Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 22. "RXVLANGBFIM,MMC Receive VLAN Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 21. "RXFOVFIM,MMC Receive FIFO Overflow Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 20. "RXPAUSFIM,MMC Receive Pause Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 19. "RXORANGEFIM,MMC Receive Out Of Range Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 18. "RXLENERFIM,MMC Receive Length Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 17. "RXUCGFIM,MMC Receive Unicast Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 16. "RX1024TMAXOCTGBFIM,MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 15. "RX512T1023OCTGBFIM,MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 14. "RX256T511OCTGBFIM,MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 13. "RX128T255OCTGBFIM,MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 12. "RX65T127OCTGBFIM,MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 11. "RX64OCTGBFIM,MMC Receive 64 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 10. "RXOSIZEGFIM,MMC Receive Oversize Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 9. "RXUSIZEGFIM,MMC Receive Undersize Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8. "RXJABERFIM,MMC Receive Jabber Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 7. "RXRUNTFIM,MMC Receive Runt Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 6. "RXALGNERFIM,MMC Receive Alignment Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 5. "RXCRCERFIM,MMC Receive CRC Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 4. "RXMCGFIM,MMC Receive Multicast Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 3. "RXBCGFIM,MMC Receive Broadcast Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 2. "RXGOCTIM,MMC Receive Good Octet Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 1. "RXGBOCTIM,MMC Receive Good Bad Octet Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 0. "RXGBFRMIM,MMC Receive Good Bad Frame Counter Interrupt Mask" "0,1"
group.long 0x110++0x03
line.long 0x00 "MMC_Transmit_Interrupt_Mask,MMC Transmit Interrupt Mask Register"
bitfld.long 0x00 25. "TXOSIZEGFIM,MMC Transmit Oversize Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 24. "TXVLANGFIM,MMC Transmit VLAN Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 23. "TXPAUSFIM,MMC Transmit Pause Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 22. "TXEXDEFFIM,MMC Transmit Excessive Deferral Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 21. "TXGFRMIM,MMC Transmit Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 20. "TXGOCTIM,MMC Transmit Good Octet Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 19. "TXCARERFIM,MMC Transmit Carrier Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 18. "TXEXCOLFIM,MMC Transmit Excessive Collision Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 17. "TXLATCOLFIM,MMC Transmit Late Collision Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 16. "TXDEFFIM,MMC Transmit Deferred Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 15. "TXMCOLGFIM,MMC Transmit Multiple Collision Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 14. "TXSCOLGFIM,MMC Transmit Single Collision Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 13. "TXUFLOWERFIM,MMC Transmit Underflow Error Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 12. "TXBCGBFIM,MMC Transmit Broadcast Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 11. "TXMCGBFIM,MMC Transmit Multicast Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 10. "TXUCGBFIM,MMC Transmit Unicast Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 9. "TX1024TMAXOCTGBFIM,MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 8. "TX512T1023OCTGBFIM,MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 7. "TX256T511OCTGBFIM,MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 6. "TX128T255OCTGBFIM,MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 5. "TX65T127OCTGBFIM,MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 4. "TX64OCTGBFIM,MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 3. "TXMCGFIM,MMC Transmit Multicast Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 2. "TXBCGFIM,MMC Transmit Broadcast Good Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 1. "TXGBFRMIM,MMC Transmit Good Bad Frame Counter Interrupt Mask" "0,1"
newline
bitfld.long 0x00 0. "TXGBOCTIM,MMC Transmit Good Bad Octet Counter Interrupt Mask" "0,1"
rgroup.long 0x114++0x03
line.long 0x00 "Tx_Octet_Count_Good_Bad,Transmit Octet Count for Good and Bad Frames"
hexmask.long 0x00 0.--31. 1. "TXOCTGB,This field indicates the number of bytes transmitted in good and bad frames exclusive of preamble and retried bytes"
rgroup.long 0x118++0x03
line.long 0x00 "Tx_Frame_Count_Good_Bad,Transmit Frame Count for Good and Bad Frames"
hexmask.long 0x00 0.--31. 1. "TXFRMGB,This field indicates the number of good and bad frames transmitted exclusive of retried frames"
rgroup.long 0x11C++0x03
line.long 0x00 "Tx_Broadcast_Frames_Good,Transmit Frame Count for Good Broadcast Frames"
hexmask.long 0x00 0.--31. 1. "TXBCASTG,This field indicates the number of transmitted good broadcast frames"
rgroup.long 0x120++0x03
line.long 0x00 "Tx_Multicast_Frames_Good,Transmit Frame Count for Good Multicast Frames"
hexmask.long 0x00 0.--31. 1. "TXMCASTG,This field indicates the number of transmitted good multicast frames"
rgroup.long 0x124++0x03
line.long 0x00 "Tx_64Octets_Frames_Good_Bad,Transmit Octet Count for Good and Bad 64 Byte Frames"
hexmask.long 0x00 0.--31. 1. "TX64OCTGB,This field indicates the number of transmitted good and bad frames with length of 64 bytes exclusive of preamble and retried frames"
rgroup.long 0x128++0x03
line.long 0x00 "Tx_65To127Octets_Frames_Good_Bad,Transmit Octet Count for Good and Bad 65 to 127 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "TX65_127OCTGB,This field indicates the number of transmitted good and bad frames with length between 65 and 127 (inclusive) bytes exclusive of preamble and retried frames"
rgroup.long 0x12C++0x03
line.long 0x00 "Tx_128To255Octets_Frames_Good_Bad,Transmit Octet Count for Good and Bad 128 to 255 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "TX128_255OCTGB,This field indicates the number of transmitted good and bad frames with length between 128 and 255 (inclusive) bytes exclusive of preamble and retried frames"
rgroup.long 0x130++0x03
line.long 0x00 "Tx_256To511Octets_Frames_Good_Bad,Transmit Octet Count for Good and Bad 256 to 511 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "TX256_511OCTGB,This field indicates the number of transmitted good and bad frames with length between 256 and 511 (inclusive) bytes exclusive of preamble and retried frames"
rgroup.long 0x134++0x03
line.long 0x00 "Tx_512To1023Octets_Frames_Good_Bad,Transmit Octet Count for Good and Bad 512 to 1023 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "TX512_1023OCTGB,This field indicates the number of transmitted good and bad frames with length between 512 and 1 023 (inclusive) bytes exclusive of preamble and retried frames"
rgroup.long 0x138++0x03
line.long 0x00 "Tx_1024ToMaxOctets_Frames_Good_Bad,Transmit Octet Count for Good and Bad 1024 to Maxsize Bytes Frames"
hexmask.long 0x00 0.--31. 1. "TX1024_MAXOCTGB,This field indicates the number of good and bad frames transmitted with length between 1 024 and maxsize (inclusive) bytes exclusive of preamble and retried frames"
rgroup.long 0x13C++0x03
line.long 0x00 "Tx_Unicast_Frames_Good_Bad,Transmit Frame Count for Good and Bad Unicast Frames"
hexmask.long 0x00 0.--31. 1. "TXUCASTGB,This field indicates the number of transmitted good and bad unicast frames"
rgroup.long 0x140++0x03
line.long 0x00 "Tx_Multicast_Frames_Good_Bad,Transmit Frame Count for Good and Bad Multicast Frames"
hexmask.long 0x00 0.--31. 1. "TXMCASTGB,This field indicates the number of transmitted good and bad multicast frames"
rgroup.long 0x144++0x03
line.long 0x00 "Tx_Broadcast_Frames_Good_Bad,Transmit Frame Count for Good and Bad Broadcast Frames"
hexmask.long 0x00 0.--31. 1. "TXBCASTGB,This field indicates the number of transmitted good and bad broadcast frames"
rgroup.long 0x148++0x03
line.long 0x00 "Tx_Underflow_Error_Frames,Transmit Frame Count for Underflow Error Frames"
hexmask.long.word 0x00 0.--15. 1. "TXUNDRFLW,This field indicates the number of frames aborted because of frame underflow error"
rgroup.long 0x14C++0x03
line.long 0x00 "Tx_Single_Collision_Good_Frames,Transmit Frame Count for Frames Transmitted after Single Collision"
hexmask.long.word 0x00 0.--15. 1. "TXSNGLCOLG,This field indicates the number of successfully transmitted frames after a single collision in the half-duplex mode"
rgroup.long 0x150++0x03
line.long 0x00 "Tx_Multiple_Collision_Good_Frames,Transmit Frame Count for Frames Transmitted after Multiple Collision"
hexmask.long.word 0x00 0.--15. 1. "TXMULTCOLG,This field indicates the number of successfully transmitted frames after multiple collisions in the half-duplex mode"
rgroup.long 0x154++0x03
line.long 0x00 "Tx_Deferred_Frames,Transmit Frame Count for Deferred Frames"
hexmask.long.word 0x00 0.--15. 1. "TXDEFRD,This field indicates the number of successfully transmitted frames after a deferral in the half-duplex mode"
rgroup.long 0x158++0x03
line.long 0x00 "Tx_Late_Collision_Frames,Transmit Frame Count for Late Collision Error Frames"
hexmask.long.word 0x00 0.--15. 1. "TXLATECOL,This field indicates the number of frames aborted because of late collision error"
rgroup.long 0x15C++0x03
line.long 0x00 "Tx_Excessive_Collision_Frames,Transmit Frame Count for Excessive Collision Error Frames"
hexmask.long.word 0x00 0.--15. 1. "TXEXSCOL,This field indicates the number of frames aborted because of excessive (16) collision error"
rgroup.long 0x160++0x03
line.long 0x00 "Tx_Carrier_Error_Frames,Transmit Frame Count for Carrier Sense Error Frames"
hexmask.long.word 0x00 0.--15. 1. "TXCARR,This field indicates the number of frames aborted because of carrier sense error (no carrier or loss of carrier)"
rgroup.long 0x164++0x03
line.long 0x00 "Tx_Octet_Count_Good,Transmit Octet Count for Good Frames"
hexmask.long 0x00 0.--31. 1. "TXOCTG,"
rgroup.long 0x168++0x03
line.long 0x00 "Tx_Frame_Count_Good,Transmit Frame Count for Good Frames"
hexmask.long 0x00 0.--31. 1. "TXFRMG,This field indicates the number of transmitted good frames exclusive of preamble"
rgroup.long 0x16C++0x03
line.long 0x00 "Tx_Excessive_Deferral_Error,Transmit Frame Count for Excessive Deferral Error Frames"
hexmask.long.word 0x00 0.--15. 1. "TXEXSDEF,This field indicates the number of frames aborted because of excessive deferral error that is frames deferred for more than two max sized frame times"
rgroup.long 0x170++0x03
line.long 0x00 "Tx_Pause_Frames,Transmit Frame Count for Good PAUSE Frames"
hexmask.long.word 0x00 0.--15. 1. "TXPAUSE,This field indicates the number of transmitted good PAUSE frames"
rgroup.long 0x174++0x03
line.long 0x00 "Tx_VLAN_Frames_Good,Transmit Frame Count for Good VLAN Frames"
hexmask.long 0x00 0.--31. 1. "TXVLANG,This register maintains the number of transmitted good VLAN frames exclusive of retried frames"
rgroup.long 0x178++0x03
line.long 0x00 "Tx_OSize_Frames_Good,Transmit Frame Count for Good Oversize Frames"
hexmask.long.word 0x00 0.--15. 1. "TXOSIZG,This field indicates the number of frames transmitted without errors and with length greater than the maxsize (1 518 or 1 522 bytes for VLAN tagged frames 2000 bytes if enabled in bit [27] of MAC Configuration Register (MAC_Configuration))"
rgroup.long 0x180++0x03
line.long 0x00 "Rx_Frames_Count_Good_Bad,Receive Frame Count for Good and Bad Frames"
hexmask.long 0x00 0.--31. 1. "RXFRMGB,This field indicates the number of received good and bad frames"
rgroup.long 0x184++0x03
line.long 0x00 "Rx_Octet_Count_Good_Bad,Receive Octet Count for Good and Bad Frames"
hexmask.long 0x00 0.--31. 1. "RXOCTGB,This field indicates the number of bytes received exclusive of preamble in good and bad frames"
rgroup.long 0x188++0x03
line.long 0x00 "Rx_Octet_Count_Good,Receive Octet Count for Good Frames"
hexmask.long 0x00 0.--31. 1. "RXOCTG,This field indicates the number of bytes received exclusive of preamble only in good frames"
rgroup.long 0x18C++0x03
line.long 0x00 "Rx_Broadcast_Frames_Good,Receive Frame Count for Good Broadcast Frames"
hexmask.long 0x00 0.--31. 1. "RXBCASTG,This field indicates the number of received good broadcast frames"
rgroup.long 0x190++0x03
line.long 0x00 "Rx_Multicast_Frames_Good,Receive Frame Count for Good Multicast Frames"
hexmask.long 0x00 0.--31. 1. "RXMCASTG,This field indicates the number of received good multicast frames"
rgroup.long 0x194++0x03
line.long 0x00 "Rx_CRC_Error_Frames,Receive Frame Count for CRC Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXCRCERR,This field indicates the number of frames received with CRC error"
rgroup.long 0x198++0x03
line.long 0x00 "Rx_Alignment_Error_Frames,Receive Frame Count for Alignment Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXALGNERR,This field indicates the number of frames received with alignment (dribble) error"
rgroup.long 0x19C++0x03
line.long 0x00 "Rx_Runt_Error_Frames,Receive Frame Count for Runt Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXRUNTERR,This field indicates the number of frames received with runt error (< 64 bytes and CRC error)"
rgroup.long 0x1A0++0x03
line.long 0x00 "Rx_Jabber_Error_Frames,Receive Frame Count for Jabber Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXJABERR,This field indicates the number of giant frames received with length (including CRC) greater than 1 518 bytes (1 522 bytes for VLAN tagged) and with CRC error"
rgroup.long 0x1A4++0x03
line.long 0x00 "Rx_Undersize_Frames_Good,Receive Frame Count for Undersize Frames"
hexmask.long.word 0x00 0.--15. 1. "RXUNDERSZG,This field indicates the number of frames received with length less than 64 bytes and without errors"
rgroup.long 0x1A8++0x03
line.long 0x00 "Rx_Oversize_Frames_Good,Receive Frame Count for Oversize Frames"
hexmask.long.word 0x00 0.--15. 1. "RXOVERSZG,This field indicates the number of frames received without errors with length greater than the maxsize (1 518 or 1 522 for VLAN tagged frames 2 000 bytes if enabled in bit [27] of MAC Configuration Register (MAC_Configuration))"
rgroup.long 0x1AC++0x03
line.long 0x00 "Rx_64Octets_Frames_Good_Bad,Receive Frame Count for Good and Bad 64 Byte Frames"
hexmask.long 0x00 0.--31. 1. "RX64OCTGB,This field indicates the number of received good and bad frames with length 64 bytes exclusive of preamble"
rgroup.long 0x1B0++0x03
line.long 0x00 "Rx_65To127Octets_Frames_Good_Bad,Receive Frame Count for Good and Bad 65 to 127 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "RX65_127OCTGB,This field indicates the number of received good and bad frames received with length between 65 and 127 (inclusive) bytes exclusive of preamble"
rgroup.long 0x1B4++0x03
line.long 0x00 "Rx_128To255Octets_Frames_Good_Bad,Receive Frame Count for Good and Bad 128 to 255 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "RX128_255OCTGB,This field indicates the number of received good and bad frames with length between 128 and 255 (inclusive) bytes exclusive of preamble"
rgroup.long 0x1B8++0x03
line.long 0x00 "Rx_256To511Octets_Frames_Good_Bad,Receive Frame Count for Good and Bad 256 to 511 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "RX256_511OCTGB,This field indicates the number of received good and bad frames with length between 256 and 511 (inclusive) bytes exclusive of preamble"
rgroup.long 0x1BC++0x03
line.long 0x00 "Rx_512To1023Octets_Frames_Good_Bad,Receive Frame Count for Good and Bad 512 to 1 023 Bytes Frames"
hexmask.long 0x00 0.--31. 1. "RX512_1023OCTGB,This field indicates the number of received good and bad frames with length between 512 and 1 023 (inclusive) bytes exclusive of preamble"
rgroup.long 0x1C0++0x03
line.long 0x00 "Rx_1024ToMaxOctets_Frames_Good_Bad,Receive Frame Count for Good and Bad 1 024 to Maxsize Bytes Frames"
hexmask.long 0x00 0.--31. 1. "RX1024_MAXOCTGB,This field indicates the number of received good and bad frames with length between 1 024 and maxsize (inclusive) bytes exclusive of preamble and retried frames"
rgroup.long 0x1C4++0x03
line.long 0x00 "Rx_Unicast_Frames_Good,Receive Frame Count for Good Unicast Frames"
hexmask.long 0x00 0.--31. 1. "RXUCASTG,This field indicates the number of received good unicast frames"
rgroup.long 0x1C8++0x03
line.long 0x00 "Rx_Length_Error_Frames,Receive Frame Count for Length Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXLENERR,"
rgroup.long 0x1CC++0x03
line.long 0x00 "Rx_Out_Of_Range_Type_Frames,Receive Frame Count for Out of Range Frames"
hexmask.long.word 0x00 0.--15. 1. "RXOUTOFRNG,This field indicates the number of received frames with length field not equal to the valid frame size (greater than 1 500 but less than 1 536)"
rgroup.long 0x1D0++0x03
line.long 0x00 "Rx_Pause_Frames,Receive Frame Count for PAUSE Frames"
hexmask.long.word 0x00 0.--15. 1. "RXPAUSEFRM,This field indicates the number of received good and valid PAUSE frames"
rgroup.long 0x1D4++0x03
line.long 0x00 "Rx_FIFO_Overflow_Frames,Receive Frame Count for FIFO Overflow Frames"
hexmask.long.word 0x00 0.--15. 1. "RXFIFOOVFL,This field indicates the number of received frames missed because of FIFO overflow"
rgroup.long 0x1D8++0x03
line.long 0x00 "Rx_VLAN_Frames_Good_Bad,Receive Frame Count for Good and Bad VLAN Frames"
hexmask.long 0x00 0.--31. 1. "RXVLANFRGB,This field indicates the number of received good and bad VLAN frames"
rgroup.long 0x1DC++0x03
line.long 0x00 "Rx_Watchdog_Error_Frames,Receive Frame Count for Watchdog Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXWDGERR,This field indicates the number of frames received with error because of the watchdog timeout error (frames with more than 2 048 bytes or value programmed in Watchdog Timeout Register (WDog_Timeout))"
rgroup.long 0x1E0++0x03
line.long 0x00 "Rx_Receive_Error_Frames,Receive Frame Count for Receive Error Frames"
hexmask.long.word 0x00 0.--15. 1. "RXRCVERR,This field indicates the number of frames received with error because of the GMII/MII RXER error or Frame Extension error on GMII"
rgroup.long 0x1E4++0x03
line.long 0x00 "Rx_Control_Frames_Good,Receive Frame Count for Good Control Frames"
hexmask.long 0x00 0.--31. 1. "RXCTRLG,This field indicates the number of good control frames received"
group.long 0x400++0x03
line.long 0x00 "GMACTRGSEL,GMAC PTP Trigger Select Register"
bitfld.long 0x00 0.--1. "TRGSEL,Select PTP Timestamp Trigger for GMAC IP" "0: Select GMAC_PTPTRGn (n = 0 1) trigger from ELC,1: Select external GMAC_PTPTRGn (n = 0 1)..,?..."
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C )
group.long ($2+0x500)++0x03
line.long 0x00 "HASH_TABLE_REG$1,Hash Table Register"
hexmask.long 0x00 0.--31. 1. "HT,This field contains the nth 32 bits [31:0] of the Hash table"
repeat.end
group.long 0x588++0x03
line.long 0x00 "VLAN_Hash_Table_Reg,VLAN Hash Table Register"
hexmask.long.word 0x00 0.--15. 1. "VLHT,VLAN Hash Table"
group.long 0x700++0x03
line.long 0x00 "Timestamp_Control,Timestamp Control Register"
bitfld.long 0x00 26. "ATSEN1,Auxiliary Snapshot 1 Enable" "0,1"
newline
bitfld.long 0x00 25. "ATSEN0,Auxiliary Snapshot 0 Enable" "0,1"
newline
bitfld.long 0x00 24. "ATSFC,Auxiliary Snapshot FIFO Clear" "0,1"
newline
bitfld.long 0x00 18. "TSENMACADDR,Enable MAC address for PTP Frame Filtering" "0,1"
newline
bitfld.long 0x00 16.--17. "SNAPTYPSEL,Select PTP packets for Taking Snapshots" "0,1,2,3"
newline
bitfld.long 0x00 15. "TSMSTRENA,Enable Snapshot for Messages Relevant to Master" "0,1"
newline
bitfld.long 0x00 14. "TSEVNTENA,Enable Timestamp Snapshot for Event Messages" "0,1"
newline
bitfld.long 0x00 13. "TSIPV4ENA,Enable Processing of PTP Frames Sent over IPv4 UDP" "0,1"
newline
bitfld.long 0x00 12. "TSIPV6ENA,Enable Processing of PTP Frames Sent Over IPv6 UDP" "0,1"
newline
bitfld.long 0x00 11. "TSIPENA,Enable Processing of PTP over Ethernet Frames" "0,1"
newline
bitfld.long 0x00 10. "TSVER2ENA,Enable PTP packet Processing for Version 2 Format" "0,1"
newline
bitfld.long 0x00 9. "TSCTRLSSR,Timestamp Digital or Binary Rollover Control" "0,1"
newline
bitfld.long 0x00 8. "TSENALL,Enable Timestamp for all Frames" "0,1"
newline
bitfld.long 0x00 0. "TSENA,Timestamp Enable" "0,1"
rgroup.long 0x728++0x03
line.long 0x00 "Timestamp_Status,Timestamp Status Register"
bitfld.long 0x00 25.--29. "ATSNS,Number of Auxiliary Timestamp Snapshots" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 24. "ATSSTM,Auxiliary Timestamp Snapshot Trigger Missed" "0,1"
newline
bitfld.long 0x00 16.--19. "ATSSTN,Auxiliary Timestamp Snapshot Trigger Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2. "AUXTSTRIG,Auxiliary Timestamp Trigger Snapshot" "0,1"
rgroup.long 0x730++0x03
line.long 0x00 "Auxiliary_Timestamp_Nanoseconds,Auxiliary Timestamp  Nanoseconds Register"
hexmask.long 0x00 0.--30. 1. "AUXTSLO,Contains the lower 32 bits (nanoseconds field) of the auxiliary timestamp"
rgroup.long 0x734++0x03
line.long 0x00 "Auxiliary_Timestamp_Seconds,Auxiliary Timestamp - Seconds Register"
hexmask.long 0x00 0.--31. 1. "AUXTSHI,Contains the upper 32 bits (Seconds field) of the auxiliary timestamp"
group.long 0x800++0x03
line.long 0x00 "MAR16_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x804++0x03
line.long 0x00 "MAR16_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x808++0x03
line.long 0x00 "MAR17_H,MAC ADDRESS High Register"
bitfld.long 0x00 31. "AE,Address Enable" "0,1"
newline
bitfld.long 0x00 30. "SA,Source Address" "0,1"
newline
bitfld.long 0x00 24.--29. "MBC,Mask Byte Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
hexmask.long.word 0x00 0.--15. 1. "ADDRHI,MAC Address n[47:32]"
group.long 0x80C++0x03
line.long 0x00 "MAR17_L,MAC ADDRESS Low Register"
hexmask.long 0x00 0.--31. 1. "ADDRLO,MAC Address n[31:0]"
group.long 0x1000++0x03
line.long 0x00 "Bus_Mode,Bus Mode Register"
rbitfld.long 0x00 31. "RIB,Rebuild INCRx Burst" "0,1"
newline
rbitfld.long 0x00 28.--29. "PRWG,Channel Priority Weights" "0,1,2,3"
newline
rbitfld.long 0x00 27. "TXPR,Transmit Priority" "0,1"
newline
rbitfld.long 0x00 26. "MB,Mixed Burst" "0,1"
newline
bitfld.long 0x00 25. "AAL,Address Aligned Beats" "0,1"
newline
bitfld.long 0x00 24. "PBLx8,PBLx8 Mode" "0,1"
newline
bitfld.long 0x00 23. "USP,Use Separate PBL" "0,1"
newline
bitfld.long 0x00 17.--22. "RPBL,RX DMA PBL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 16. "FB,Fixed Burst" "0,1"
newline
rbitfld.long 0x00 14.--15. "PR,Priority Ratio" "0,1,2,3"
newline
bitfld.long 0x00 8.--13. "PBL,Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 7. "ATDS,Enhanced Descriptor Size" "0,1"
newline
bitfld.long 0x00 2.--6. "DSL,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
rbitfld.long 0x00 1. "DA,DMA Arbitration Scheme" "0,1"
newline
bitfld.long 0x00 0. "SWR,Software Reset" "0,1"
group.long 0x1004++0x03
line.long 0x00 "Transmit_Poll_Demand,Transmit Poll Demand Register"
hexmask.long 0x00 0.--31. 1. "TPD,Transmit Poll Demand"
group.long 0x1008++0x03
line.long 0x00 "Receive_Poll_Demand,Receive Poll Demand Register"
hexmask.long 0x00 0.--31. 1. "RPD,Receive Poll Demand"
group.long 0x100C++0x03
line.long 0x00 "Receive_Descriptor_List_Address,Receive Descriptor List Address Register"
hexmask.long 0x00 2.--31. 1. "RDESLA_32bit,Start of Receive List"
group.long 0x1010++0x03
line.long 0x00 "Transmit_Descriptor_List_Address,Transmit Descriptor List Address Register"
hexmask.long 0x00 2.--31. 1. "TDESLA_32bit,Start of Transmit List"
group.long 0x1014++0x03
line.long 0x00 "Status,Status Register"
rbitfld.long 0x00 30. "GLPII,GMAC LPI Interrupt" "0,1"
newline
rbitfld.long 0x00 29. "TTI,Timestamp Trigger Interrupt" "0,1"
newline
rbitfld.long 0x00 28. "GPI,GMAC PMT Interrupt" "0,1"
newline
rbitfld.long 0x00 27. "GMI,GMAC MMC Interrupt" "0,1"
newline
rbitfld.long 0x00 23.--25. "EB,Error Bits" "0: Error during RX DMA Write Data Transfer,1: Reserved,2: Reserved,3: Error during TX DMA Read Data Transfer,4: Error during RX DMA Descriptor Write Access,5: Error during TX DMA Descriptor Write Access,6: Error during RX DMA Descriptor Read Access,7: Error during TX DMA Descriptor Read Access"
newline
rbitfld.long 0x00 20.--22. "TS,Transmit Process State" "0: Stopped,1: Running,2: Running,3: Running,4: TIME_STAMP write state,5: Reserved for future use,6: Suspended,7: Running"
newline
rbitfld.long 0x00 17.--19. "RS,Received Process State" "0: Stopped,1: Running,2: Reserved for future use,3: Running,4: Suspended,5: Running,6: TIME_STAMP write state,7: Running"
newline
bitfld.long 0x00 16. "NIS,Normal Interrupt Summary" "0,1"
newline
bitfld.long 0x00 15. "AIS,Abnormal Interrupt Summary" "0,1"
newline
bitfld.long 0x00 14. "ERI,Early Receive Interrupt" "0,1"
newline
bitfld.long 0x00 13. "FBI,Fatal Bus Error Interrupt" "0,1"
newline
bitfld.long 0x00 10. "ETI,Early Transmit Interrupt" "0,1"
newline
bitfld.long 0x00 9. "RWT,Receive Watchdog Timeout" "0,1"
newline
bitfld.long 0x00 8. "RPS,Receive Process Stopped" "0,1"
newline
bitfld.long 0x00 7. "RU,Receive Buffer Unavailable" "0,1"
newline
bitfld.long 0x00 6. "RI,Receive Interrupt" "0,1"
newline
bitfld.long 0x00 5. "UNF,Transmit Underflow" "0,1"
newline
bitfld.long 0x00 4. "OVF,Receive Overflow" "0,1"
newline
bitfld.long 0x00 3. "TJT,Transmit Jabber Timeout" "0,1"
newline
bitfld.long 0x00 2. "TU,Transmit Buffer Unavailable" "0,1"
newline
bitfld.long 0x00 1. "TPS,Transmit Process Stopped" "0,1"
newline
bitfld.long 0x00 0. "TI,Transmit Interrupt" "0,1"
group.long 0x1018++0x03
line.long 0x00 "Operation_Mode,Operation Mode Register"
bitfld.long 0x00 26. "DT,Disable Dropping of TCP/IP Checksum Error Frames" "0,1"
newline
bitfld.long 0x00 25. "RSF,Receive Store and Forward" "0,1"
newline
bitfld.long 0x00 21. "TSF,Transmit Store and Forward" "0,1"
newline
bitfld.long 0x00 20. "FTF,Flush Transmit FIFO" "0,1"
newline
bitfld.long 0x00 14.--16. "TTC,Transmit Threshold Control" "0: 000,1: 001,2: 010,3: 011,4: 100,5: 101,6: 110,7: 111"
newline
bitfld.long 0x00 13. "ST,Start or Stop Transmission Command" "0,1"
newline
bitfld.long 0x00 11.--12. "RFD,Threshold for Deactivating Flow Control (in half-duplex and full-duplex)" "0: Full minus 1 KB that is FULL - 1 KB,1: Full minus 2 KB that is FULL - 2 KB,2: Full minus 3 KB that is FULL - 3 KB,3: Full minus 4 KB that is FULL - 4 KB"
newline
bitfld.long 0x00 9.--10. "RFA,Threshold for Activating Flow Control (in half-duplex and full-duplex)" "0: Full minus 1 KB that is FULL - 1 KB,1: Full minus 2 KB that is FULL - 2 KB,2: Full minus 3 KB that is FULL - 3 KB,3: Reserved"
newline
bitfld.long 0x00 8. "EFC,Enable HW Flow Control" "0,1"
newline
bitfld.long 0x00 7. "FEF,Forward Error Frames" "0,1"
newline
bitfld.long 0x00 6. "FUF,Forward Undersized Good Frames" "0,1"
newline
bitfld.long 0x00 5. "DGF,Drop Giant Frames" "0,1"
newline
bitfld.long 0x00 3.--4. "RTC,Receive Threshold Control" "0: 00,1: 01,2: 10,3: 128"
newline
bitfld.long 0x00 2. "OSF,Operate on Second Frame" "0,1"
newline
bitfld.long 0x00 1. "SR,Start or Stop Receive" "0,1"
group.long 0x101C++0x03
line.long 0x00 "Interrupt_Enable,Interrupt Enable Register"
bitfld.long 0x00 16. "NIE,Normal Interrupt Summary Enable" "0,1"
newline
bitfld.long 0x00 15. "AIE,Abnormal Interrupt Summary Enable" "0,1"
newline
bitfld.long 0x00 14. "ERE,Early Receive Interrupt Enable" "0,1"
newline
bitfld.long 0x00 13. "FBE,Fatal Bus Error Enable" "0,1"
newline
bitfld.long 0x00 10. "ETE,Early Transmit Interrupt Enable" "0,1"
newline
bitfld.long 0x00 9. "RWE,Receive Watchdog Timeout Enable" "0,1"
newline
bitfld.long 0x00 8. "RSE,Receive Stopped Enable" "0,1"
newline
bitfld.long 0x00 7. "RUE,Receive Buffer Unavailable Enable" "0,1"
newline
bitfld.long 0x00 6. "RIE,Receive Interrupt Enable" "0,1"
newline
bitfld.long 0x00 5. "UNE,Underflow Interrupt Enable" "0,1"
newline
bitfld.long 0x00 4. "OVE,Overflow Interrupt Enable" "0,1"
newline
bitfld.long 0x00 3. "TJE,Transmit Jabber Timeout Enable" "0,1"
newline
bitfld.long 0x00 2. "TUE,Transmit Buffer Unavailable Enable" "0,1"
newline
bitfld.long 0x00 1. "TSE,Transmit Stopped Enable" "0,1"
newline
bitfld.long 0x00 0. "TIE,Transmit Interrupt Enable" "0,1"
rgroup.long 0x1020++0x03
line.long 0x00 "Missed_Frame_And_Buffer_Overflow_Counter,Missed Frame and Buffer Overflow Counter Register"
bitfld.long 0x00 28. "OVFCNTOVF,Overflow Bit for FIFO Overflow Counter" "0,1"
newline
hexmask.long.word 0x00 17.--27. 1. "OVFFRMCNT,Overflow Frame Counter"
newline
bitfld.long 0x00 16. "MISCNTOVF,Overflow Bit for Missed Frame Counter" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. "MISFRMCNT,Missed Frame Counter"
group.long 0x1024++0x03
line.long 0x00 "Receive_Interrupt_Watchdog_Timer,Receive Interrupt Watchdog Timer Register"
hexmask.long.byte 0x00 0.--7. 1. "RIWT,RI Watchdog Timer Count"
group.long 0x1028++0x03
line.long 0x00 "AXI_Bus_Mode,AXI Bus Mode Register"
bitfld.long 0x00 31. "EN_LPI,Enable Low Power Interface (LPI)" "0,1"
newline
bitfld.long 0x00 30. "LPI_XIT_FRM,Unlock on Magic Packet or Remote Wake-Up Frame" "0,1"
newline
bitfld.long 0x00 20.--21. "WR_OSR_LMT,AXI Maximum Write OutStanding Request Limit" "0,1,2,3"
newline
bitfld.long 0x00 16.--17. "RD_OSR_LMT,AXI Maximum Read OutStanding Request Limit" "0,1,2,3"
newline
bitfld.long 0x00 13. "ONEKBBE,1 KB Boundary Crossing Enable for the GMAC-AXI Master" "0,1"
newline
rbitfld.long 0x00 12. "AXI_AAL,Address-Aligned Beats" "0,1"
newline
bitfld.long 0x00 3. "BLEN16,AXI Burst Length 16" "0,1"
newline
bitfld.long 0x00 2. "BLEN8,AXI Burst Length 8" "0,1"
newline
bitfld.long 0x00 1. "BLEN4,AXI Burst Length 4" "0,1"
newline
rbitfld.long 0x00 0. "UNDEF,AXI Undefined Burst Length" "0,1"
rgroup.long 0x102C++0x03
line.long 0x00 "AXI_Status,AXI Status Register"
bitfld.long 0x00 1. "AXIRDSTS,AXI Master Read Channel Status" "0,1"
newline
bitfld.long 0x00 0. "AXWHSTS,AXI Master Write Channel" "0,1"
rgroup.long 0x1048++0x03
line.long 0x00 "Current_Host_Transmit_Descriptor,Current Host Transmit Descriptor Register"
hexmask.long 0x00 0.--31. 1. "CURTDESAPTR,Host Transmit Descriptor Address Pointer"
rgroup.long 0x104C++0x03
line.long 0x00 "Current_Host_Receive_Descriptor,Current Host Receive Descriptor Register"
hexmask.long 0x00 0.--31. 1. "CURRDESAPTR,Host Receive Descriptor Address Pointer"
rgroup.long 0x1050++0x03
line.long 0x00 "Current_Host_Transmit_Buffer_Address,Current Host Transmit Buffer Address Register"
hexmask.long 0x00 0.--31. 1. "CURTBUFAPTR,Host Transmit Buffer Address Pointer"
rgroup.long 0x1054++0x03
line.long 0x00 "Current_Host_Receive_Buffer_Address,Current Host Receive Buffer Address Register"
hexmask.long 0x00 0.--31. 1. "CURRBUFAPTR,Host Receive Buffer Address Pointer"
rgroup.long 0x1058++0x03
line.long 0x00 "HW_Feature,HW Feature Register"
bitfld.long 0x00 28.--30. "ACTPHYIF,Active or Selected PHY interface" "0: GMII or MII,?..."
newline
bitfld.long 0x00 27. "SAVLANINS,Source Address or VLAN Insertion" "0,1"
newline
bitfld.long 0x00 26. "FLEXIPPSEN,Flexible Pulse-Per-Second Output (GMAC: 0)" "0,1"
newline
bitfld.long 0x00 25. "INTTSEN,Timestamping with Internal System Time" "0,1"
newline
bitfld.long 0x00 24. "ENHDESSEL,Enhanced Descriptor" "0,1"
newline
bitfld.long 0x00 22.--23. "TXCHCNT,Number of additional TX channels" "0,1,2,3"
newline
bitfld.long 0x00 20.--21. "RXCHCNT,Number of additional RX channels" "0,1,2,3"
newline
bitfld.long 0x00 19. "RXFIFOSIZE,RX FIFO > 2 048 Bytes" "0,1"
newline
bitfld.long 0x00 18. "RXTYP2COE,IP Checksum Offload (Type 2) in RX" "0,1"
newline
bitfld.long 0x00 17. "RXTYP1COE,IP Checksum Offload (Type 1) in RX" "0,1"
newline
bitfld.long 0x00 16. "TXCOESEL,Checksum Offload in TX" "0,1"
newline
bitfld.long 0x00 15. "AVSEL,AV Feature" "0,1"
newline
bitfld.long 0x00 14. "EEESEL,Energy Efficient Ethernet" "0,1"
newline
bitfld.long 0x00 13. "TSVER2SEL,IEEE 1588-2008 Advanced Timestamp" "0,1"
newline
bitfld.long 0x00 12. "TSVER1SEL,Only IEEE 1588-2002 Timestamp" "0,1"
newline
bitfld.long 0x00 11. "MMCSEL,RMON Module" "0,1"
newline
bitfld.long 0x00 10. "MGKSEL,PMT Magic Packet" "0,1"
newline
bitfld.long 0x00 9. "RWKSEL,PMT Remote wakeup" "0,1"
newline
bitfld.long 0x00 8. "SMASEL,SMA (MDIO) Interface" "0,1"
newline
bitfld.long 0x00 7. "L3L4FLTREN,Layer 3 and Layer 4 Filter Feature" "0,1"
newline
bitfld.long 0x00 5. "ADDMACADRSEL,Multiple MAC Address Registers" "0,1"
newline
bitfld.long 0x00 4. "HASHSEL,HASH Filter" "0,1"
newline
bitfld.long 0x00 3. "EXTHASHEN,Expanded DA Hash Filter" "0,1"
newline
bitfld.long 0x00 2. "HDSEL,Half-Duplex support" "0,1"
newline
bitfld.long 0x00 1. "GMIISEL,1000 Mbps support" "0,1"
newline
bitfld.long 0x00 0. "MIISEL,10 or 100 Mbps support" "0,1"
tree.end
tree "GPT (General Purpose Timer)"
repeat 14. (list 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.) (list ad:0x90002000 ad:0x90002100 ad:0x90002200 ad:0x90002300 ad:0x90002400 ad:0x90002500 ad:0x90002600 ad:0x80000000 ad:0x80000100 ad:0x80000200 ad:0x80000300 ad:0x80000400 ad:0x80000500 ad:0x80000600)
tree "GPT$1"
base $2
group.long 0x00++0x03
line.long 0x00 "GTWP,General PWM Timer Write-Protection Register"
hexmask.long.byte 0x00 8.--15. 1. "PRKEY,GTWP Key Code"
bitfld.long 0x00 4. "CMNWP,Common Register Write Disabled" "0: Write to the register is enabled,1: Write to the register is disabled"
newline
bitfld.long 0x00 3. "CLRWP,GTCLR.CCLR Bit Write Disabled" "0: Write to the bit is enabled,1: Write to the bit is disabled"
bitfld.long 0x00 2. "STPWP,GTSTP.CSTOP Bit Write Disabled" "0: Write to the bit is enabled,1: Write to the bit is disabled"
newline
bitfld.long 0x00 1. "STRWP,GTSTR.CSTRT Bit Write Disabled" "0: Write to the bit is enabled,1: Write to the bit is disabled"
bitfld.long 0x00 0. "WP,Register Write Disabled" "0: Write to the register is enabled,1: Write to the register is disabled"
group.long 0x04++0x03
line.long 0x00 "GTSTR,General PWM Timer Software Start Register"
bitfld.long 0x00 6. "CSTRT6,Channel 6 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
bitfld.long 0x00 5. "CSTRT5,Channel 5 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
newline
bitfld.long 0x00 4. "CSTRT4,Channel 4 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
bitfld.long 0x00 3. "CSTRT3,Channel 3 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
newline
bitfld.long 0x00 2. "CSTRT2,Channel 2 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
bitfld.long 0x00 1. "CSTRT1,Channel 1 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
newline
bitfld.long 0x00 0. "CSTRT0,Channel 0 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
group.long 0x08++0x03
line.long 0x00 "GTSTP,General PWM Timer Software Stop Register"
bitfld.long 0x00 6. "CSTOP6,Channel 6 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
bitfld.long 0x00 5. "CSTOP5,Channel 5 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
newline
bitfld.long 0x00 4. "CSTOP4,Channel 4 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
bitfld.long 0x00 3. "CSTOP3,Channel 3 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
newline
bitfld.long 0x00 2. "CSTOP2,Channel 2 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
bitfld.long 0x00 1. "CSTOP1,Channel 1 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
newline
bitfld.long 0x00 0. "CSTOP0,Channel 0 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
wgroup.long 0x0C++0x03
line.long 0x00 "GTCLR,General PWM Timer Software Clear Register"
bitfld.long 0x00 6. "CCLR6,Channel 6 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
bitfld.long 0x00 5. "CCLR5,Channel 5 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
newline
bitfld.long 0x00 4. "CCLR4,Channel 4 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
bitfld.long 0x00 3. "CCLR3,Channel 3 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
newline
bitfld.long 0x00 2. "CCLR2,Channel 2 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
bitfld.long 0x00 1. "CCLR1,Channel 1 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
newline
bitfld.long 0x00 0. "CCLR0,Channel 0 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
group.long 0x10++0x03
line.long 0x00 "GTSSR,General PWM Timer Start Source Select Register"
bitfld.long 0x00 31. "CSTRT,Software Source Count Start Enable" "0: Disables count start by the GTSTR register,1: Enables count start by the GTSTR register"
bitfld.long 0x00 23. "SSELCH," "0: Disables count start by the LLPP GPT event H..,1: Enables count start by the LLPP GPT event H /.."
newline
bitfld.long 0x00 22. "SSELCG," "0: Disables count start by the LLPP GPT event G..,1: Enables count start by the LLPP GPT event G /.."
bitfld.long 0x00 21. "SSELCF," "0: Disables count start by the LLPP GPT event F..,1: Enables count start by the LLPP GPT event F /.."
newline
bitfld.long 0x00 20. "SSELCE," "0: Disables count start by the LLPP GPT event E..,1: Enables count start by the LLPP GPT event E /.."
bitfld.long 0x00 19. "SSELCD," "0: Disables count start by the LLPP GPT event D..,1: Enables count start by the LLPP GPT event D /.."
newline
bitfld.long 0x00 18. "SSELCC," "0: Disables count start by the LLPP GPT event C..,1: Enables count start by the LLPP GPT event C /.."
bitfld.long 0x00 17. "SSELCB," "0: Disables count start by the LLPP GPT event B..,1: Enables count start by the LLPP GPT event B /.."
newline
bitfld.long 0x00 16. "SSELCA," "0: Disables count start by the LLPP GPT event A..,1: Enables count start by the LLPP GPT event A /.."
bitfld.long 0x00 14.--15. "SSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter starts at a falling edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at a falling edge of the.."
newline
bitfld.long 0x00 12.--13. "SSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter starts at a rising edge of the..,2: The counter starts at a rising edge of the..,3: The counter starts at a rising edge of the.."
bitfld.long 0x00 10.--11. "SSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter starts at a falling edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at a falling edge of the.."
newline
bitfld.long 0x00 8.--9. "SSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter starts at a rising edge of the..,2: The counter starts at a rising edge of the..,3: The counter starts at a rising edge of the.."
bitfld.long 0x00 6.--7. "SSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
newline
bitfld.long 0x00 4.--5. "SSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
bitfld.long 0x00 2.--3. "SSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
newline
bitfld.long 0x00 0.--1. "SSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
group.long 0x14++0x03
line.long 0x00 "GTPSR,General PWM Timer Stop Source Select Register"
bitfld.long 0x00 31. "CSTOP," "0: Disables count stop by the GTSTP register,1: Enables count stop by the GTSTP register"
bitfld.long 0x00 23. "PSELCH," "0: Disables count stop by the LLPP GPT event H /..,1: Enables count stop by the LLPP GPT event H /.."
newline
bitfld.long 0x00 22. "PSELCG," "0: Disables count stop by the LLPP GPT event G /..,1: Enables count stop by the LLPP GPT event G /.."
bitfld.long 0x00 21. "PSELCF," "0: Disables count stop by the LLPP GPT event F /..,1: Enables count stop by the LLPP GPT event F /.."
newline
bitfld.long 0x00 20. "PSELCE," "0: Disables count stop by the LLPP GPT event E /..,1: Enables count stop by the LLPP GPT event E /.."
bitfld.long 0x00 19. "PSELCD," "0: Disables count stop by the LLPP GPT event D /..,1: Enables count stop by the LLPP GPT event D /.."
newline
bitfld.long 0x00 18. "PSELCC," "0: Disables count stop by the LLPP GPT event C /..,1: Enables count stop by the LLPP GPT event C /.."
bitfld.long 0x00 17. "PSELCB," "0: Disables count stop by the LLPP GPT event B /..,1: Enables count stop by the LLPP GPT event B /.."
newline
bitfld.long 0x00 16. "PSELCA," "0: Disables count stop by the LLPP GPT event A /..,1: Enables count stop by the LLPP GPT event A /.."
bitfld.long 0x00 14.--15. "PSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter stops at a falling edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at a falling edge of the.."
newline
bitfld.long 0x00 12.--13. "PSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter stops at a rising edge of the..,2: The counter stops at a rising edge of the..,3: The counter stops at a rising edge of the.."
bitfld.long 0x00 10.--11. "PSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter stops at a falling edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at a falling edge of the.."
newline
bitfld.long 0x00 8.--9. "PSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter stops at a rising edge of the..,2: The counter stops at a rising edge of the..,3: The counter stops at a rising edge of the.."
bitfld.long 0x00 6.--7. "PSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
newline
bitfld.long 0x00 4.--5. "PSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
bitfld.long 0x00 2.--3. "PSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
newline
bitfld.long 0x00 0.--1. "PSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
group.long 0x18++0x03
line.long 0x00 "GTCSR,General PWM Timer Clear Source Select Register"
bitfld.long 0x00 31. "CCLR," "0: Disables counter clear by the GTCLR register,1: Enables counter clear by the GTCLR register"
bitfld.long 0x00 23. "CSELCH," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event H.."
newline
bitfld.long 0x00 22. "CSELCG," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event G.."
bitfld.long 0x00 21. "CSELCF," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event F.."
newline
bitfld.long 0x00 20. "CSELCE," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event E.."
bitfld.long 0x00 19. "CSELCD," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event D.."
newline
bitfld.long 0x00 18. "CSELCC," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event C.."
bitfld.long 0x00 17. "CSELCB," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event B.."
newline
bitfld.long 0x00 16. "CSELCA," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event A.."
bitfld.long 0x00 14.--15. "CSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter is cleared at a falling edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at a falling edge of.."
newline
bitfld.long 0x00 12.--13. "CSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a rising edge of..,3: The counter is cleared at a rising edge of.."
bitfld.long 0x00 10.--11. "CSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter is cleared at a falling edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at a falling edge of.."
newline
bitfld.long 0x00 8.--9. "CSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a rising edge of..,3: The counter is cleared at a rising edge of.."
bitfld.long 0x00 6.--7. "CSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
newline
bitfld.long 0x00 4.--5. "CSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
bitfld.long 0x00 2.--3. "CSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
newline
bitfld.long 0x00 0.--1. "CSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
group.long 0x1C++0x03
line.long 0x00 "GTUPSR,General PWM Timer Count-Up Source Select Register"
bitfld.long 0x00 23. "USELCH," "0: Disables count-up by the LLPP GPT event H /..,1: Enables count-up by the LLPP GPT event H /.."
bitfld.long 0x00 22. "USELCG," "0: Disables count-up by the LLPP GPT event G /..,1: Enables count-up by the LLPP GPT event G /.."
newline
bitfld.long 0x00 21. "USELCF," "0: Disables count-up by the LLPP GPT event F /..,1: Enables count-up by the LLPP GPT event F /.."
bitfld.long 0x00 20. "USELCE," "0: Disables count-up by the LLPP GPT event E /..,1: Enables count-up by the LLPP GPT event E /.."
newline
bitfld.long 0x00 19. "USELCD," "0: Disables count-up by the LLPP GPT event D /..,1: Enables count-up by the LLPP GPT event D /.."
bitfld.long 0x00 18. "USELCC," "0: Disables count-up by the LLPP GPT event C /..,1: Enables count-up by the LLPP GPT event C /.."
newline
bitfld.long 0x00 17. "USELCB," "0: Disables count-up by the LLPP GPT event B /..,1: Enables count-up by the LLPP GPT event B /.."
bitfld.long 0x00 16. "USELCA," "0: Disables count-up by the LLPP GPT event A /..,1: Enables count-up by the LLPP GPT event A /.."
newline
bitfld.long 0x00 14.--15. "USCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter is incremented at a falling edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at a falling edge.."
bitfld.long 0x00 12.--13. "USCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a rising edge..,3: The counter is incremented at a rising edge.."
newline
bitfld.long 0x00 10.--11. "USCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter is incremented at a falling edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at a falling edge.."
bitfld.long 0x00 8.--9. "USCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a rising edge..,3: The counter is incremented at a rising edge.."
newline
bitfld.long 0x00 6.--7. "USGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
bitfld.long 0x00 4.--5. "USGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
newline
bitfld.long 0x00 2.--3. "USGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
bitfld.long 0x00 0.--1. "USGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
group.long 0x20++0x03
line.long 0x00 "GTDNSR,General PWM Timer Count-Down Source Select Register"
bitfld.long 0x00 23. "DSELCH," "0: Disables count-down by the LLPP GPT event H /..,1: Enables count-down by the LLPP GPT event H /.."
bitfld.long 0x00 22. "DSELCG," "0: Disables count-down by the LLPP GPT event G /..,1: Enables count-down by the LLPP GPT event G /.."
newline
bitfld.long 0x00 21. "DSELCF," "0: Disables count-down by the LLPP GPT event F /..,1: Enables count-down by the LLPP GPT event F /.."
bitfld.long 0x00 20. "DSELCE," "0: Disables count-down by the LLPP GPT event E /..,1: Enables count-down by the LLPP GPT event E /.."
newline
bitfld.long 0x00 19. "DSELCD," "0: Disables count-down by the LLPP GPT event D /..,1: Enables count-down by the LLPP GPT event D /.."
bitfld.long 0x00 18. "DSELCC," "0: Disables count-down by the LLPP GPT event C /..,1: Enables count-down by the LLPP GPT event C /.."
newline
bitfld.long 0x00 17. "DSELCB," "0: Disables count-down by the LLPP GPT event B /..,1: Enables count-down by the LLPP GPT event B /.."
bitfld.long 0x00 16. "DSELCA," "0: Disables count-down by the LLPP GPT event A /..,1: Enables count-down by the LLPP GPT event A /.."
newline
bitfld.long 0x00 14.--15. "DSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter is decremented at a falling edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at a falling edge.."
bitfld.long 0x00 12.--13. "DSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a rising edge..,3: The counter is decremented at a rising edge.."
newline
bitfld.long 0x00 10.--11. "DSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter is decremented at a falling edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at a falling edge.."
bitfld.long 0x00 8.--9. "DSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a rising edge..,3: The counter is decremented at a rising edge.."
newline
bitfld.long 0x00 6.--7. "DSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
bitfld.long 0x00 4.--5. "DSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
newline
bitfld.long 0x00 2.--3. "DSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
bitfld.long 0x00 0.--1. "DSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
group.long 0x24++0x03
line.long 0x00 "GTICASR,General PWM Timer Input Capture Source Select Register A"
bitfld.long 0x00 23. "ASELCH," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 22. "ASELCG," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 21. "ASELCF," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 20. "ASELCE," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 19. "ASELCD," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 18. "ASELCC," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 17. "ASELCB," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 16. "ASELCA," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 14.--15. "ASCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 12.--13. "ASCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
newline
bitfld.long 0x00 10.--11. "ASCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 8.--9. "ASCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
newline
bitfld.long 0x00 6.--7. "ASGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 4.--5. "ASGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
newline
bitfld.long 0x00 2.--3. "ASGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 0.--1. "ASGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
group.long 0x28++0x03
line.long 0x00 "GTICBSR,General PWM Timer Input Capture Source Select Register B"
bitfld.long 0x00 23. "BSELCH," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 22. "BSELCG," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 21. "BSELCF," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 20. "BSELCE," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 19. "BSELCD," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 18. "BSELCC," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 17. "BSELCB," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 16. "BSELCA," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 14.--15. "BSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 12.--13. "BSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
newline
bitfld.long 0x00 10.--11. "BSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 8.--9. "BSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
newline
bitfld.long 0x00 6.--7. "BSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 4.--5. "BSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
newline
bitfld.long 0x00 2.--3. "BSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 0.--1. "BSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
group.long 0x2C++0x03
line.long 0x00 "GTCR,General PWM Timer Control Register"
bitfld.long 0x00 29.--31. "SWMD,Switch Mode Select" "0: Hardware switch operation is disabled,1: Switch to upcount with offset reload,2: Switch to downcount with offset reload,3: Setting prohibited,4: Setting prohibited,5: Switch to upcount without offset reload,6: Switch to downcount without offset reload,7: Setting prohibited"
bitfld.long 0x00 23.--26. "TPCS,Timer Prescaler Select" "0: Core Clock/1,1: Core Clock/2,2: Core Clock/4,3: Core Clock/8,4: Core Clock/16,5: Core Clock/32,6: Core Clock/64,7: Setting prohibited,8: Core Clock/256,9: Setting prohibited,10: Core Clock/1024,11: Setting prohibited,12: GTETRGA GTETRGSA for SAFETY group (using the..,13: GTETRGB GTETRGSB for SAFETY group (using the..,14: GTETRGC (using the POEG) only LLPP and..,15: GTETRGD (using the POEG) only LLPP and.."
newline
bitfld.long 0x00 16.--18. "MD,Mode Select" "0: Sawtooth-wave PWM mode (single buffer or..,1: Sawtooth-wave one-shot pulse mode (fixed..,2: Setting prohibited,3: Setting prohibited,4: Triangle-wave PWM mode 1 (32-bit transfer at..,5: Triangle-wave PWM mode 2 (32-bit transfer at..,6: Triangle-wave PWM mode 3 (64-bit transfer at..,7: Setting prohibited"
bitfld.long 0x00 8. "ICDS,Input Capture Operation Select at Count Stop" "0: Input capture is operated during count stop,1: Input capture is not operated during count stop"
newline
bitfld.long 0x00 0. "CST,Count Start" "0: Count operation is stopped,1: Count operation is started"
group.long 0x30++0x03
line.long 0x00 "GTUDDTYC,General PWM Timer Count Direction and Duty Setting Register"
bitfld.long 0x00 27. "OBDTYR,Output after Release of GTIOCnB Pin Output 0%/100% Duty Cycle Settings" "0: The function selected by the GTIOR.GTIOB[3:2]..,1: The function selected by the GTIOR.GTIOB[3:2].."
bitfld.long 0x00 26. "OBDTYF,GTIOCnB Pin Output Duty Forced Setting" "0: Duty of the GTIOCnB pin output is not..,1: Duty of the GTIOCnB pin output is forcibly set"
newline
bitfld.long 0x00 24.--25. "OBDTY,GTIOCnB Pin Output Duty Setting" "0: Compare matches determine the duty cycle of..,1: Compare matches determine the duty cycle of..,2: The duty cycle of the output on the GTIOCnB..,3: The duty cycle of the output on the GTIOCnB.."
bitfld.long 0x00 19. "OADTYR,Output after Release of GTIOCnA Pin Output 0%/100% Duty Cycle Settings" "0: The function selected by the GTIOR.GTIOA[3:2]..,1: The function selected by the GTIOR.GTIOA[3:2].."
newline
bitfld.long 0x00 18. "OADTYF,GTIOCnA Pin Output Duty Forced Setting" "0: Duty of the GTIOCnA pin output is not..,1: Duty of the GTIOCnA pin output is forcibly set"
bitfld.long 0x00 16.--17. "OADTY,GTIOCnA Pin Output Duty Setting" "0: Compare matches determine the duty cycle of..,1: Compare matches determine the duty cycle of..,2: The duty cycle of the output on the GTIOCnA..,3: The duty cycle of the output on the GTIOCnA.."
newline
bitfld.long 0x00 1. "UDF,Forcible Count Direction Setting" "0: Count direction is not forcibly set,1: Count direction is forcibly set"
bitfld.long 0x00 0. "UD,Count Direction Setting" "0: GTCNT counts down,1: GTCNT counts up"
group.long 0x34++0x03
line.long 0x00 "GTIOR,General PWM Timer I/O Control Register"
bitfld.long 0x00 30.--31. "NFCSB,GTIOCnB Pin Input Noise Filter Sampling Clock Select" "0: Core clock,1: Core clock/4,2: Core clock/16,3: Core clock/64"
bitfld.long 0x00 29. "NFBEN,GTIOCnB Pin Input Noise Filter Enable" "0: The noise filter for GTIOCnB pin input is..,1: The noise filter for GTIOCnB pin input is.."
newline
bitfld.long 0x00 25.--26. "OBDF,GTIOCnB Pin Negate Value Setting" "0: None of the following sources is specified,1: GTIOCnB pin is placed in the Hi-Z state in..,2: GTIOCnB pin is set to 0 in response to..,3: GTIOCnB pin is set to 1 in response to.."
bitfld.long 0x00 24. "OBE,GTIOCnB Pin Output Enable" "0: Pin output is disabled,1: Pin output is enabled"
newline
bitfld.long 0x00 23. "OBHLD,GTIOCnB Pin Output Retention at the Start/Stop Count" "0: The GTIOCnB pin output level at start/stop of..,1: The GTIOCnB pin output level is retained at.."
bitfld.long 0x00 22. "OBDFLT,GTIOCnB Pin Output Value Setting at the Count Stop" "0: The GTIOCnB pin outputs low when counting is..,1: The GTIOCnB pin outputs high when counting is.."
newline
bitfld.long 0x00 16.--20. "GTIOB,GTIOCnB Pin Function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 14.--15. "NFCSA,GTIOCnA Pin Input Noise Filter Sampling Clock Select" "0: Core clock,1: Core clock/4,2: Core clock/16,3: Core clock/64"
newline
bitfld.long 0x00 13. "NFAEN,GTIOCnA Pin Input Noise Filter Enable" "0: The noise filter for GTIOCnA pin input is..,1: The noise filter for GTIOCnA pin input is.."
bitfld.long 0x00 9.--10. "OADF,GTIOCnA Pin Negate Value Setting" "0: None of the following sources is specified,1: GTIOCnA pin is placed in the Hi-Z state in..,2: GTIOCnA pin is set to 0 in response to..,3: GTIOCnA pin is set to 1 in response to.."
newline
bitfld.long 0x00 8. "OAE,GTIOCnA Pin Output Enable" "0: Pin output is disabled,1: Pin output is enabled"
bitfld.long 0x00 7. "OAHLD,GTIOCnA Pin Output Retention at the Start/Stop Count" "0: The GTIOCnA pin output level at start/stop of..,1: The GTIOCnA pin output level is retained at.."
newline
bitfld.long 0x00 6. "OADFLT,GTIOCnA Pin Output Value Setting at the Count Stop" "0: The GTIOCnA pin outputs low when counting is..,1: The GTIOCnA pin outputs high when counting is.."
bitfld.long 0x00 0.--4. "GTIOA,GTIOCnA Pin Function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x38++0x03
line.long 0x00 "GTINTAD,General PWM Timer Interrupt Output Setting Register"
bitfld.long 0x00 30. "GRPABL,(GTIOCnA pin and GTIOCnB output)" "0: Simultaneous low output stop detection is..,1: Simultaneous low output stop detection is.."
bitfld.long 0x00 29. "GRPABH,(GTIOCnA pin and GTIOCnB output)" "0: Simultaneous high output stop detection is..,1: Simultaneous high output stop detection is.."
newline
bitfld.long 0x00 28. "GRPDTE," "0: Dead time error output stop detection is..,1: Dead time error output stop detection is.."
bitfld.long 0x00 24.--25. "GRP,Select the group to detect disabling of output (dead-time error or simultaneous driving of outputs to the high or low level) to POEG and to request of disabling of output from POEG" "0: Group A is selected,1: Group B is selected,2: Group C is selected,3: Group D is selected"
newline
bitfld.long 0x00 19. "ADTRBDEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
bitfld.long 0x00 18. "ADTRBUEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
newline
bitfld.long 0x00 17. "ADTRADEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
bitfld.long 0x00 16. "ADTRAUEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
newline
bitfld.long 0x00 6.--7. "GTINTPR," "0: Interrupt request is disabled,1: In sawtooth-wave mode interrupt requests are..,2: In sawtooth-wave mode interrupt requests are..,3: In sawtooth-wave mode interrupt requests are.."
bitfld.long 0x00 5. "GTINTF," "0: Interrupt request is disabled,1: Interrupt request is enabled"
newline
bitfld.long 0x00 4. "GTINTE," "0: Interrupt request is disabled,1: Interrupt request is enabled"
bitfld.long 0x00 3. "GTINTD," "0: Interrupt request is disabled,1: Interrupt request is enabled"
newline
bitfld.long 0x00 2. "GTINTC," "0: Interrupt request is disabled,1: Interrupt request is enabled"
bitfld.long 0x00 1. "GTINTB," "0: Interrupt request is disabled,1: Interrupt request is enabled"
newline
bitfld.long 0x00 0. "GTINTA," "0: Interrupt request is disabled,1: Interrupt request is enabled"
group.long 0x3C++0x03
line.long 0x00 "GTST,General PWM Timer Status Register"
rbitfld.long 0x00 30. "OABLF,Simultaneous Low Output Flag" "0: No simultaneous generation of low output both..,1: A simultaneous generation of low output both.."
rbitfld.long 0x00 29. "OABHF,Simultaneous High Output Flag" "0: No simultaneous generation of high output..,1: A simultaneous generation of high output both.."
newline
rbitfld.long 0x00 28. "DTEF,Dead Time Error Flag" "0: No dead time error has occurred,1: A dead time error has occurred"
rbitfld.long 0x00 24. "ODF,Output Stop Request Flag" "0: No output stop request has occurred,1: An output stop request has occurred"
newline
bitfld.long 0x00 19. "ADTRBDF,GTADTRB Register Compare Match (Down-Counting) A/D Converter Start Request Flag" "0: No GTADTRB register compare match has..,1: A GTADTRB register compare match has occurred.."
bitfld.long 0x00 18. "ADTRBUF,GTADTRB Register Compare Match (Up-Counting) A/D Converter Start Request Flag" "0: No GTADTRB register compare match has..,1: A GTADTRB register compare match has occurred.."
newline
bitfld.long 0x00 17. "ADTRADF,GTADTRA Register Compare Match (Down-Counting) A/D Converter Start Request Flag" "0: No GTADTRA register compare match has..,1: A GTADTRA register compare match has occurred.."
bitfld.long 0x00 16. "ADTRAUF,GTADTRA Register Compare Match (Up-Counting) A/D Converter Start Request Flag" "0: No GTADTRA register compare match has..,1: A GTADTRA register compare match has occurred.."
newline
rbitfld.long 0x00 15. "TUCF,Count Direction Flag" "0: The GTCNT counter counts downward,1: The GTCNT counter counts upward"
rbitfld.long 0x00 8.--10. "ITCNT,GPTn_OVF/GPTn_UDF Interrupt Skipping Count Counter" "0,1,2,3,4,5,6,7"
group.long 0x40++0x03
line.long 0x00 "GTBER,General PWM Timer Buffer Enable Register"
bitfld.long 0x00 30. "ADTDB,GTADTRB Register Double Buffer Operation" "0: Single buffer operation (GTADTBRB register ?..,1: Double buffer operation (GTADTDBRB register ?.."
bitfld.long 0x00 28.--29. "ADTTB,GTADTRB Register Buffer Transfer Timing Select" "0: No transfer,1: (Triangle waves) Transfer at crest (Sawtooth..,2: (Triangle waves) Transfer at trough (Sawtooth..,3: (Triangle waves) Transfer at both crest and.."
newline
bitfld.long 0x00 26. "ADTDA,GTADTRA Register Double Buffer Operation" "0: Single buffer operation (GTADTBRA register ?..,1: Double buffer operation (GTADTDBRA register ?.."
bitfld.long 0x00 24.--25. "ADTTA,GTADTRA Register Buffer Transfer Timing Select" "0: No transfer,1: (Triangle waves) Transfer at crest (Sawtooth..,2: (Triangle waves) Transfer at trough (Sawtooth..,3: (Triangle waves) Transfer at both crest and.."
newline
bitfld.long 0x00 22. "CCRSWT,GTCCRA and GTCCRB Registers Forcible Buffer Operation" "0,1"
bitfld.long 0x00 20.--21. "PR,GTPR Register Buffer Operation" "0: Buffer operation is not performed,1: Single buffer operation (GTPBR register ?..,2: Double buffer operation (GTPDBR register ?..,3: Double buffer operation (GTPDBR register ?.."
newline
bitfld.long 0x00 18.--19. "CCRB,GTCCRB Register Buffer Operation" "0: Buffer operation is not performed,1: Single buffer operation (GTCCRB register ?..,2: Double buffer operation (GTCCRB register ?..,3: Double buffer operation (GTCCRB register ?.."
bitfld.long 0x00 16.--17. "CCRA,GTCCRA Register Buffer Operation" "0: Buffer operation is not performed,1: Single buffer operation (GTCCRA register ?..,2: Double buffer operation (GTCCRA register ?..,3: Double buffer operation (GTCCRA register ?.."
newline
bitfld.long 0x00 10. "DBRTECB,GTCCRB Register Double Buffer Repeat Operation Enable" "0: GTCCRB register double buffer repeat..,1: GTCCRB register double buffer repeat.."
bitfld.long 0x00 8. "DBRTECA,GTCCRA Register Double Buffer Repeat Operation Enable" "0: GTCCRA register double buffer repeat..,1: GTCCRA register double buffer repeat.."
newline
bitfld.long 0x00 3. "BD3,GTDVU/GTDVD Registers Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
bitfld.long 0x00 2. "BD2,GTADTRA/GTADTRB Registers Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
newline
bitfld.long 0x00 1. "BD1,GTPR Register Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
bitfld.long 0x00 0. "BD0,GTCCRA/GTCCRB Registers Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
group.long 0x44++0x03
line.long 0x00 "GTITC,General PWM Timer Interrupt and A/D Converter Start Request Skipping Setting Register"
bitfld.long 0x00 14. "ADTBL," "0: Not linked with GPTn_OVF/GPTn_UDF interrupt..,1: Linked with GPTn_OVF/GPTn_UDF interrupt.."
bitfld.long 0x00 12. "ADTAL," "0: Not linked with GPTn_OVF/GPTn_UDF interrupt..,1: Linked with GPTn_OVF/GPTn_UDF interrupt.."
newline
bitfld.long 0x00 8.--10. "IVTT," "0: Skipping is not performed,1: Skipping count of 1,2: Skipping count of 2,3: Skipping count of 3,4: Skipping count of 4,5: Skipping count of 5,6: Skipping count of 6,7: Skipping count of 7"
bitfld.long 0x00 6.--7. "IVTC," "0: Skipping is not performed,1: Both overflow and underflow for sawtooth..,2: Both overflow and underflow for sawtooth..,3: Both overflow and underflow for sawtooth.."
newline
bitfld.long 0x00 5. "ITLF," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
bitfld.long 0x00 4. "ITLE," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
newline
bitfld.long 0x00 3. "ITLD," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
bitfld.long 0x00 2. "ITLC," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
newline
bitfld.long 0x00 1. "ITLB," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
bitfld.long 0x00 0. "ITLA," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
group.long 0x48++0x03
line.long 0x00 "GTCNT,General PWM Timer Counter"
group.long 0x4C++0x03
line.long 0x00 "GTCCRA,General PWM Timer Compare Capture Register A (m = A to F)"
group.long 0x50++0x03
line.long 0x00 "GTCCRB,General PWM Timer Compare Capture Register B (m = A to F)"
group.long 0x54++0x03
line.long 0x00 "GTCCRC,General PWM Timer Compare Capture Register C (m = A to F)"
group.long 0x58++0x03
line.long 0x00 "GTCCRE,General PWM Timer Compare Capture Register E (m = A to F)"
group.long 0x5C++0x03
line.long 0x00 "GTCCRD,General PWM Timer Compare Capture Register D (m = A to F)"
group.long 0x60++0x03
line.long 0x00 "GTCCRF,General PWM Timer Compare Capture Register F (m = A to F)"
group.long 0x64++0x03
line.long 0x00 "GTPR,General PWM Timer Cycle Setting Register"
group.long 0x68++0x03
line.long 0x00 "GTPBR,General PWM Timer Cycle Setting Buffer Register"
group.long 0x6C++0x03
line.long 0x00 "GTPDBR,General PWM Timer Cycle Setting Double-Buffer Register"
group.long 0x70++0x03
line.long 0x00 "GTADTRA,A/D Converter Start Request Timing Register A (m = A B)"
group.long 0x74++0x03
line.long 0x00 "GTADTBRA,A/D Converter Start Request Timing Buffer Register A (m = A B)"
group.long 0x78++0x03
line.long 0x00 "GTADTDBRA,A/D Converter Start Request Timing Double-Buffer Register A"
group.long 0x7C++0x03
line.long 0x00 "GTADTRB,A/D Converter Start Request Timing Register B (m = A B)"
group.long 0x80++0x03
line.long 0x00 "GTADTBRB,A/D Converter Start Request Timing Buffer Register B (m = A B)"
group.long 0x84++0x03
line.long 0x00 "GTADTDBRB,A/D Converter Start Request Timing Double-Buffer Register B"
group.long 0x88++0x03
line.long 0x00 "GTDTCR,General PWM Timer Dead Time Control Register"
bitfld.long 0x00 8. "TDFER,GTDVD Register Setting" "0: GTDVU and GTDVD registers are set separately,1: The value written to GTDVU register is.."
bitfld.long 0x00 5. "TDBDE,GTDVD Register Buffer Operation Enable" "0: GTDVD register buffer operation is disabled,1: GTDVD register buffer operation is enabled"
newline
bitfld.long 0x00 4. "TDBUE,GTDVU Register Buffer Operation Enable" "0: GTDVU register buffer operation is disabled,1: GTDVU register buffer operation is enabled"
bitfld.long 0x00 0. "TDE,Negative-Phase Waveform Setting" "0: GTCCRB register is set without using GTDVU..,1: GTDVU and GTDVD registers are used to set the.."
group.long 0x8C++0x03
line.long 0x00 "GTDVU,General PWM Timer Dead Time Value Register U (m = U D)"
group.long 0x90++0x03
line.long 0x00 "GTDVD,General PWM Timer Dead Time Value Register D (m = U D)"
group.long 0x94++0x03
line.long 0x00 "GTDBU,General PWM Timer Dead Time Value Buffer Register U (m = U D)"
group.long 0x98++0x03
line.long 0x00 "GTDBD,General PWM Timer Dead Time Value Buffer Register D (m = U D)"
rgroup.long 0x9C++0x03
line.long 0x00 "GTSOS,General PWM Timer Output Protection Function Status Register"
bitfld.long 0x00 0.--1. "SOS,Output Protection Function Status" "0: Normal operation,1: Protected state (GTCCRA = 0 is set during..,2: Protected state (GTCCRA e GTPR is set during..,3: Protected state (GTCCRA e GTPR is set during.."
group.long 0xA0++0x03
line.long 0x00 "GTSOTR,General PWM Timer Output Protection Function Temporary Release Register"
bitfld.long 0x00 0. "SOTR,Output Protection Function Temporary Release" "0: Protected state is not released,1: Protected state is released"
group.long 0xA4++0x03
line.long 0x00 "GTADSMR,General PWM Timer A/D Conversion Start Request Signal Monitoring Register"
bitfld.long 0x00 24. "ADSMEN1,A/D Conversion Start Request Signal Monitor 1 Output Enabling" "0: Output of A/D conversion start request signal..,1: Output of A/D conversion start request signal.."
bitfld.long 0x00 16.--17. "ADSMS1,A/D Conversion Start Request Signal Monitor 1 Selection" "0: A/D conversion start request signal generated..,1: A/D conversion start request signal generated..,2: A/D conversion start request signal generated..,3: A/D conversion start request signal generated.."
newline
bitfld.long 0x00 8. "ADSMEN0,A/D Conversion Start Request Signal Monitor 0 Output Enabling" "0: Output of A/D conversion start request signal..,1: Output of A/D conversion start request signal.."
bitfld.long 0x00 0.--1. "ADSMS0,A/D Conversion Start Request Signal Monitor 0 Selection" "0: A/D conversion start request signal generated..,1: A/D conversion start request signal generated..,2: A/D conversion start request signal generated..,3: A/D conversion start request signal generated.."
group.long 0xA8++0x03
line.long 0x00 "GTEITC,General PWM Timer Extended Interrupt Skipping Counter Control Register"
rbitfld.long 0x00 28.--31. "EITCNT2,Extended Interrupt Skipping Counter 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "EITCNT2IV,Extended Interrupt Skipping Counter 2 Initial Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "EIVTT2,Extended Interrupt Skipping 2 Skipping Count Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--17. "EIVTC2,Extended Interrupt Skipping Counter 2 Count Source Select" "0: Not counted (not skipped),1: Counting both at overflow or underflow in..,2: Counting both at overflow or underflow in..,3: Counting both at overflow or underflow in.."
newline
rbitfld.long 0x00 12.--15. "EITCNT1,Extended Interrupt Skipping Counter 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "EIVTT1,Extended Interrupt Skipping 1 Skipping Count Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--1. "EIVTC1,Extended Interrupt Skipping Counter 1 Count Source Select" "0: Not counted (not skipped),1: Counting both at overflow or underflow in..,2: Counting both at overflow or underflow in..,3: Counting both at overflow or underflow in.."
group.long 0xAC++0x03
line.long 0x00 "GTEITLI1,General PWM Timer Extended Interrupt Skipping Setting Register 1"
bitfld.long 0x00 28.--30. "EITLU,Underflow Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "EITLV,Overflow Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "EITLF,GTCCRF Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "EITLE,GTCCRE Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "EITLD,GTCCRD Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "EITLC,GTCCRC Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "EITLB,GTCCRB Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EITLA,GTCCRA Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
group.long 0xB0++0x03
line.long 0x00 "GTEITLI2,General PWM Timer Extended Interrupt Skipping Setting Register 2"
bitfld.long 0x00 4.--6. "EADTBL,GTADTRB A/D Converter Start Request Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EADTAL,GTADTRA A/D Converter Start Request Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
group.long 0xB4++0x03
line.long 0x00 "GTEITLB,General PWM Timer Extended Buffer Transfer Skipping Setting Register"
bitfld.long 0x00 28.--30. "EBTLDVD,GTDVD Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "EBTLDVU,GTDVU Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "EBTLADB,GTADTRB Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "EBTLADA,GTADTRA Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--10. "EBTLPR,GTPR Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "EBTLCB,GTCCRB Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "EBTLCA,GTCCRA Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
group.long 0xD0++0x03
line.long 0x00 "GTSECSR,General PWM Timer Operation Enable Bit Simultaneous Control Channel Select Register"
bitfld.long 0x00 6. "SECSEL6,Channel 6 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
bitfld.long 0x00 5. "SECSEL5,Channel 5 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
newline
bitfld.long 0x00 4. "SECSEL4,Channel 4 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
bitfld.long 0x00 3. "SECSEL3,Channel 3 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
newline
bitfld.long 0x00 2. "SECSEL2,Channel 2 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
bitfld.long 0x00 1. "SECSEL1,Channel 1 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
newline
bitfld.long 0x00 0. "SECSEL0,Channel 0 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
group.long 0xD4++0x03
line.long 0x00 "GTSECR,General PWM Timer Operation Enable Bit Simultaneous Control Register"
bitfld.long 0x00 11. "SBDDD,GTDV Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTDV buffer..,1: Disable GTDV register buffer operations.."
bitfld.long 0x00 10. "SBDAD,GTADTR Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTADTR buffer..,1: Disable GTADTR register buffer operations.."
newline
bitfld.long 0x00 9. "SBDPD,GTPR Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTPR buffer..,1: Disable GTPR register buffer operations.."
bitfld.long 0x00 8. "SBDCD,GTCCR Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTCCR buffer..,1: Disable GTCCR register buffer operations.."
newline
bitfld.long 0x00 3. "SBDDE,GTDV Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTDV buffer..,1: Enable GTDV register buffer operations.."
bitfld.long 0x00 2. "SBDAE,GTADTR Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTADTR buffer..,1: Enable GTADTR register buffer operations.."
newline
bitfld.long 0x00 1. "SBDPE,GTPR Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTPR buffer..,1: Enable GTPR register buffer operations.."
bitfld.long 0x00 0. "SBDCE,GTCCR Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTCCR buffer..,1: Enable GTCCR register buffer operations.."
group.long 0xD8++0x03
line.long 0x00 "GTSWSR,General PWM Timer Switch Source Select Register"
bitfld.long 0x00 23. "CSELCH,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event H..,1: Enables count switch by the LLPP GPT event H.."
bitfld.long 0x00 22. "WSELCG,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event G..,1: Enables count switch by the LLPP GPT event G.."
newline
bitfld.long 0x00 21. "WSELCF,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event F..,1: Enables count switch by the LLPP GPT event F.."
bitfld.long 0x00 20. "WSELCE,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event E..,1: Enables count switch by the LLPP GPT event E.."
newline
bitfld.long 0x00 19. "WSELCD,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event D..,1: Enables count switch by the LLPP GPT event D.."
bitfld.long 0x00 18. "WSELCC,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event C..,1: Enables count switch by the LLPP GPT event C.."
newline
bitfld.long 0x00 17. "WSELCB,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event B..,1: Enables count switch by the LLPP GPT event B.."
bitfld.long 0x00 16. "WSELCA,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event A..,1: Enables count switch by the LLPP GPT event A.."
newline
bitfld.long 0x00 6.--7. "WSGTRGD,GTETRGD Signal Edge Select to Switch Counter (GTETRGSD Signal for SAFTY)" "0: The GTETRGD signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
bitfld.long 0x00 4.--5. "WSGTRGC,GTETRGC Signal Edge Select to Switch Counter (GTETRGSC Signal for SAFTY)" "0: The GTETRGC signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
newline
bitfld.long 0x00 2.--3. "WSGTRGB,GTETRGB Signal Edge Select to Switch Counter (GTETRGSB Signal for SAFTY)" "0: The GTETRGB signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
bitfld.long 0x00 0.--1. "WSGTRGA,GTETRGA Signal Edge Select to Switch Counter (GTETRGSA Signal for SAFTY)" "0: The GTETRGA signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
group.long 0xDC++0x03
line.long 0x00 "GTSWOS,General PWM Timer Switch Offset Setting Register"
tree.end
repeat.end
repeat 4. (list 14. 15. 16. 17.) (list ad:0x81000000 ad:0x81000100 ad:0x81000200 ad:0x81000300)
tree "GPT$1"
base $2
group.long 0x00++0x03
line.long 0x00 "GTWP,General PWM Timer Write-Protection Register"
hexmask.long.byte 0x00 8.--15. 1. "PRKEY,GTWP Key Code"
bitfld.long 0x00 4. "CMNWP,Common Register Write Disabled" "0: Write to the register is enabled,1: Write to the register is disabled"
newline
bitfld.long 0x00 3. "CLRWP,GTCLR.CCLR Bit Write Disabled" "0: Write to the bit is enabled,1: Write to the bit is disabled"
bitfld.long 0x00 2. "STPWP,GTSTP.CSTOP Bit Write Disabled" "0: Write to the bit is enabled,1: Write to the bit is disabled"
newline
bitfld.long 0x00 1. "STRWP,GTSTR.CSTRT Bit Write Disabled" "0: Write to the bit is enabled,1: Write to the bit is disabled"
bitfld.long 0x00 0. "WP,Register Write Disabled" "0: Write to the register is enabled,1: Write to the register is disabled"
group.long 0x04++0x03
line.long 0x00 "GTSTR,General PWM Timer Software Start Register"
bitfld.long 0x00 6. "CSTRT6,Channel 6 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
bitfld.long 0x00 5. "CSTRT5,Channel 5 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
newline
bitfld.long 0x00 4. "CSTRT4,Channel 4 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
bitfld.long 0x00 3. "CSTRT3,Channel 3 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
newline
bitfld.long 0x00 2. "CSTRT2,Channel 2 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
bitfld.long 0x00 1. "CSTRT1,Channel 1 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
newline
bitfld.long 0x00 0. "CSTRT0,Channel 0 Count Start" "0: (Reading) The counter is stopped (Writing) No..,1: (Reading) The counter is running (Writing).."
group.long 0x08++0x03
line.long 0x00 "GTSTP,General PWM Timer Software Stop Register"
bitfld.long 0x00 6. "CSTOP6,Channel 6 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
bitfld.long 0x00 5. "CSTOP5,Channel 5 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
newline
bitfld.long 0x00 4. "CSTOP4,Channel 4 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
bitfld.long 0x00 3. "CSTOP3,Channel 3 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
newline
bitfld.long 0x00 2. "CSTOP2,Channel 2 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
bitfld.long 0x00 1. "CSTOP1,Channel 1 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
newline
bitfld.long 0x00 0. "CSTOP0,Channel 0 Count Stop" "0: (Reading) The counter is operating (Writing)..,1: (Reading) The counter is stopped (Writing).."
wgroup.long 0x0C++0x03
line.long 0x00 "GTCLR,General PWM Timer Software Clear Register"
bitfld.long 0x00 6. "CCLR6,Channel 6 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
bitfld.long 0x00 5. "CCLR5,Channel 5 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
newline
bitfld.long 0x00 4. "CCLR4,Channel 4 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
bitfld.long 0x00 3. "CCLR3,Channel 3 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
newline
bitfld.long 0x00 2. "CCLR2,Channel 2 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
bitfld.long 0x00 1. "CCLR1,Channel 1 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
newline
bitfld.long 0x00 0. "CCLR0,Channel 0 Count Clear" "0: The counter is not cleared,1: The counter is cleared"
group.long 0x10++0x03
line.long 0x00 "GTSSR,General PWM Timer Start Source Select Register"
bitfld.long 0x00 31. "CSTRT,Software Source Count Start Enable" "0: Disables count start by the GTSTR register,1: Enables count start by the GTSTR register"
bitfld.long 0x00 23. "SSELCH," "0: Disables count start by the LLPP GPT event H..,1: Enables count start by the LLPP GPT event H /.."
newline
bitfld.long 0x00 22. "SSELCG," "0: Disables count start by the LLPP GPT event G..,1: Enables count start by the LLPP GPT event G /.."
bitfld.long 0x00 21. "SSELCF," "0: Disables count start by the LLPP GPT event F..,1: Enables count start by the LLPP GPT event F /.."
newline
bitfld.long 0x00 20. "SSELCE," "0: Disables count start by the LLPP GPT event E..,1: Enables count start by the LLPP GPT event E /.."
bitfld.long 0x00 19. "SSELCD," "0: Disables count start by the LLPP GPT event D..,1: Enables count start by the LLPP GPT event D /.."
newline
bitfld.long 0x00 18. "SSELCC," "0: Disables count start by the LLPP GPT event C..,1: Enables count start by the LLPP GPT event C /.."
bitfld.long 0x00 17. "SSELCB," "0: Disables count start by the LLPP GPT event B..,1: Enables count start by the LLPP GPT event B /.."
newline
bitfld.long 0x00 16. "SSELCA," "0: Disables count start by the LLPP GPT event A..,1: Enables count start by the LLPP GPT event A /.."
bitfld.long 0x00 14.--15. "SSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter starts at a falling edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at a falling edge of the.."
newline
bitfld.long 0x00 12.--13. "SSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter starts at a rising edge of the..,2: The counter starts at a rising edge of the..,3: The counter starts at a rising edge of the.."
bitfld.long 0x00 10.--11. "SSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter starts at a falling edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at a falling edge of the.."
newline
bitfld.long 0x00 8.--9. "SSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter starts at a rising edge of the..,2: The counter starts at a rising edge of the..,3: The counter starts at a rising edge of the.."
bitfld.long 0x00 6.--7. "SSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
newline
bitfld.long 0x00 4.--5. "SSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
bitfld.long 0x00 2.--3. "SSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
newline
bitfld.long 0x00 0.--1. "SSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter starts at a rising edge of the..,2: The counter starts at a falling edge of the..,3: The counter starts at both edges of the.."
group.long 0x14++0x03
line.long 0x00 "GTPSR,General PWM Timer Stop Source Select Register"
bitfld.long 0x00 31. "CSTOP," "0: Disables count stop by the GTSTP register,1: Enables count stop by the GTSTP register"
bitfld.long 0x00 23. "PSELCH," "0: Disables count stop by the LLPP GPT event H /..,1: Enables count stop by the LLPP GPT event H /.."
newline
bitfld.long 0x00 22. "PSELCG," "0: Disables count stop by the LLPP GPT event G /..,1: Enables count stop by the LLPP GPT event G /.."
bitfld.long 0x00 21. "PSELCF," "0: Disables count stop by the LLPP GPT event F /..,1: Enables count stop by the LLPP GPT event F /.."
newline
bitfld.long 0x00 20. "PSELCE," "0: Disables count stop by the LLPP GPT event E /..,1: Enables count stop by the LLPP GPT event E /.."
bitfld.long 0x00 19. "PSELCD," "0: Disables count stop by the LLPP GPT event D /..,1: Enables count stop by the LLPP GPT event D /.."
newline
bitfld.long 0x00 18. "PSELCC," "0: Disables count stop by the LLPP GPT event C /..,1: Enables count stop by the LLPP GPT event C /.."
bitfld.long 0x00 17. "PSELCB," "0: Disables count stop by the LLPP GPT event B /..,1: Enables count stop by the LLPP GPT event B /.."
newline
bitfld.long 0x00 16. "PSELCA," "0: Disables count stop by the LLPP GPT event A /..,1: Enables count stop by the LLPP GPT event A /.."
bitfld.long 0x00 14.--15. "PSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter stops at a falling edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at a falling edge of the.."
newline
bitfld.long 0x00 12.--13. "PSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter stops at a rising edge of the..,2: The counter stops at a rising edge of the..,3: The counter stops at a rising edge of the.."
bitfld.long 0x00 10.--11. "PSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter stops at a falling edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at a falling edge of the.."
newline
bitfld.long 0x00 8.--9. "PSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter stops at a rising edge of the..,2: The counter stops at a rising edge of the..,3: The counter stops at a rising edge of the.."
bitfld.long 0x00 6.--7. "PSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
newline
bitfld.long 0x00 4.--5. "PSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
bitfld.long 0x00 2.--3. "PSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
newline
bitfld.long 0x00 0.--1. "PSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter stops at a rising edge of the..,2: The counter stops at a falling edge of the..,3: The counter stops at both edges of the.."
group.long 0x18++0x03
line.long 0x00 "GTCSR,General PWM Timer Clear Source Select Register"
bitfld.long 0x00 31. "CCLR," "0: Disables counter clear by the GTCLR register,1: Enables counter clear by the GTCLR register"
bitfld.long 0x00 23. "CSELCH," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event H.."
newline
bitfld.long 0x00 22. "CSELCG," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event G.."
bitfld.long 0x00 21. "CSELCF," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event F.."
newline
bitfld.long 0x00 20. "CSELCE," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event E.."
bitfld.long 0x00 19. "CSELCD," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event D.."
newline
bitfld.long 0x00 18. "CSELCC," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event C.."
bitfld.long 0x00 17. "CSELCB," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event B.."
newline
bitfld.long 0x00 16. "CSELCA," "0: Disables counter clear by the LLPP GPT event..,1: Enables counter clear by the LLPP GPT event A.."
bitfld.long 0x00 14.--15. "CSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter is cleared at a falling edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at a falling edge of.."
newline
bitfld.long 0x00 12.--13. "CSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a rising edge of..,3: The counter is cleared at a rising edge of.."
bitfld.long 0x00 10.--11. "CSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter is cleared at a falling edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at a falling edge of.."
newline
bitfld.long 0x00 8.--9. "CSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a rising edge of..,3: The counter is cleared at a rising edge of.."
bitfld.long 0x00 6.--7. "CSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
newline
bitfld.long 0x00 4.--5. "CSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
bitfld.long 0x00 2.--3. "CSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
newline
bitfld.long 0x00 0.--1. "CSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter is cleared at a rising edge of..,2: The counter is cleared at a falling edge of..,3: The counter is cleared at both edges of the.."
group.long 0x1C++0x03
line.long 0x00 "GTUPSR,General PWM Timer Count-Up Source Select Register"
bitfld.long 0x00 23. "USELCH," "0: Disables count-up by the LLPP GPT event H /..,1: Enables count-up by the LLPP GPT event H /.."
bitfld.long 0x00 22. "USELCG," "0: Disables count-up by the LLPP GPT event G /..,1: Enables count-up by the LLPP GPT event G /.."
newline
bitfld.long 0x00 21. "USELCF," "0: Disables count-up by the LLPP GPT event F /..,1: Enables count-up by the LLPP GPT event F /.."
bitfld.long 0x00 20. "USELCE," "0: Disables count-up by the LLPP GPT event E /..,1: Enables count-up by the LLPP GPT event E /.."
newline
bitfld.long 0x00 19. "USELCD," "0: Disables count-up by the LLPP GPT event D /..,1: Enables count-up by the LLPP GPT event D /.."
bitfld.long 0x00 18. "USELCC," "0: Disables count-up by the LLPP GPT event C /..,1: Enables count-up by the LLPP GPT event C /.."
newline
bitfld.long 0x00 17. "USELCB," "0: Disables count-up by the LLPP GPT event B /..,1: Enables count-up by the LLPP GPT event B /.."
bitfld.long 0x00 16. "USELCA," "0: Disables count-up by the LLPP GPT event A /..,1: Enables count-up by the LLPP GPT event A /.."
newline
bitfld.long 0x00 14.--15. "USCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter is incremented at a falling edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at a falling edge.."
bitfld.long 0x00 12.--13. "USCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a rising edge..,3: The counter is incremented at a rising edge.."
newline
bitfld.long 0x00 10.--11. "USCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter is incremented at a falling edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at a falling edge.."
bitfld.long 0x00 8.--9. "USCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a rising edge..,3: The counter is incremented at a rising edge.."
newline
bitfld.long 0x00 6.--7. "USGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
bitfld.long 0x00 4.--5. "USGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
newline
bitfld.long 0x00 2.--3. "USGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
bitfld.long 0x00 0.--1. "USGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter is incremented at a rising edge..,2: The counter is incremented at a falling edge..,3: The counter is incremented at both edges of.."
group.long 0x20++0x03
line.long 0x00 "GTDNSR,General PWM Timer Count-Down Source Select Register"
bitfld.long 0x00 23. "DSELCH," "0: Disables count-down by the LLPP GPT event H /..,1: Enables count-down by the LLPP GPT event H /.."
bitfld.long 0x00 22. "DSELCG," "0: Disables count-down by the LLPP GPT event G /..,1: Enables count-down by the LLPP GPT event G /.."
newline
bitfld.long 0x00 21. "DSELCF," "0: Disables count-down by the LLPP GPT event F /..,1: Enables count-down by the LLPP GPT event F /.."
bitfld.long 0x00 20. "DSELCE," "0: Disables count-down by the LLPP GPT event E /..,1: Enables count-down by the LLPP GPT event E /.."
newline
bitfld.long 0x00 19. "DSELCD," "0: Disables count-down by the LLPP GPT event D /..,1: Enables count-down by the LLPP GPT event D /.."
bitfld.long 0x00 18. "DSELCC," "0: Disables count-down by the LLPP GPT event C /..,1: Enables count-down by the LLPP GPT event C /.."
newline
bitfld.long 0x00 17. "DSELCB," "0: Disables count-down by the LLPP GPT event B /..,1: Enables count-down by the LLPP GPT event B /.."
bitfld.long 0x00 16. "DSELCA," "0: Disables count-down by the LLPP GPT event A /..,1: Enables count-down by the LLPP GPT event A /.."
newline
bitfld.long 0x00 14.--15. "DSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter is decremented at a falling edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at a falling edge.."
bitfld.long 0x00 12.--13. "DSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a rising edge..,3: The counter is decremented at a rising edge.."
newline
bitfld.long 0x00 10.--11. "DSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter is decremented at a falling edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at a falling edge.."
bitfld.long 0x00 8.--9. "DSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a rising edge..,3: The counter is decremented at a rising edge.."
newline
bitfld.long 0x00 6.--7. "DSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
bitfld.long 0x00 4.--5. "DSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
newline
bitfld.long 0x00 2.--3. "DSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
bitfld.long 0x00 0.--1. "DSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter is decremented at a rising edge..,2: The counter is decremented at a falling edge..,3: The counter is decremented at both edges of.."
group.long 0x24++0x03
line.long 0x00 "GTICASR,General PWM Timer Input Capture Source Select Register A"
bitfld.long 0x00 23. "ASELCH," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 22. "ASELCG," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 21. "ASELCF," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 20. "ASELCE," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 19. "ASELCD," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 18. "ASELCC," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 17. "ASELCB," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
bitfld.long 0x00 16. "ASELCA," "0: Disables GTCCRA input capture by the LLPP GPT..,1: Enables GTCCRA input capture by the LLPP GPT.."
newline
bitfld.long 0x00 14.--15. "ASCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 12.--13. "ASCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
newline
bitfld.long 0x00 10.--11. "ASCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 8.--9. "ASCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
newline
bitfld.long 0x00 6.--7. "ASGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 4.--5. "ASGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
newline
bitfld.long 0x00 2.--3. "ASGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
bitfld.long 0x00 0.--1. "ASGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter value is captured in the GTCCRA..,2: The counter value is captured in the GTCCRA..,3: The counter value is captured in the GTCCRA.."
group.long 0x28++0x03
line.long 0x00 "GTICBSR,General PWM Timer Input Capture Source Select Register B"
bitfld.long 0x00 23. "BSELCH," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 22. "BSELCG," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 21. "BSELCF," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 20. "BSELCE," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 19. "BSELCD," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 18. "BSELCC," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 17. "BSELCB," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
bitfld.long 0x00 16. "BSELCA," "0: Disables GTCCRB input capture by the LLPP GPT..,1: Enables GTCCRB input capture by the LLPP GPT.."
newline
bitfld.long 0x00 14.--15. "BSCBFAHL," "0: Falling edge of the GTIOCnB signal is not..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 12.--13. "BSCBRAHL," "0: Rising edge of the GTIOCnB signal is not used..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
newline
bitfld.long 0x00 10.--11. "BSCAFBHL," "0: Falling edge of the GTIOCnA signal is not..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 8.--9. "BSCARBHL," "0: Rising edge of the GTIOCnA signal is not used..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
newline
bitfld.long 0x00 6.--7. "BSGTRGDFR," "0: The GTETRGD signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 4.--5. "BSGTRGCFR," "0: The GTETRGC signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
newline
bitfld.long 0x00 2.--3. "BSGTRGBFR," "0: The GTETRGB signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
bitfld.long 0x00 0.--1. "BSGTRGAFR," "0: The GTETRGA signal is not used as a trigger..,1: The counter value is captured in the GTCCRB..,2: The counter value is captured in the GTCCRB..,3: The counter value is captured in the GTCCRB.."
group.long 0x2C++0x03
line.long 0x00 "GTCR,General PWM Timer Control Register"
bitfld.long 0x00 29.--31. "SWMD,Switch Mode Select" "0: Hardware switch operation is disabled,1: Switch to upcount with offset reload,2: Switch to downcount with offset reload,3: Setting prohibited,4: Setting prohibited,5: Switch to upcount without offset reload,6: Switch to downcount without offset reload,7: Setting prohibited"
bitfld.long 0x00 23.--26. "TPCS,Timer Prescaler Select" "0: Core Clock/1,1: Core Clock/2,2: Core Clock/4,3: Core Clock/8,4: Core Clock/16,5: Core Clock/32,6: Core Clock/64,7: Setting prohibited,8: Core Clock/256,9: Setting prohibited,10: Core Clock/1024,11: Setting prohibited,12: GTETRGA GTETRGSA for SAFETY group (using the..,13: GTETRGB GTETRGSB for SAFETY group (using the..,14: GTETRGC (using the POEG) only LLPP and..,15: GTETRGD (using the POEG) only LLPP and.."
newline
bitfld.long 0x00 16.--18. "MD,Mode Select" "0: Sawtooth-wave PWM mode (single buffer or..,1: Sawtooth-wave one-shot pulse mode (fixed..,2: Setting prohibited,3: Setting prohibited,4: Triangle-wave PWM mode 1 (32-bit transfer at..,5: Triangle-wave PWM mode 2 (32-bit transfer at..,6: Triangle-wave PWM mode 3 (64-bit transfer at..,7: Setting prohibited"
bitfld.long 0x00 8. "ICDS,Input Capture Operation Select at Count Stop" "0: Input capture is operated during count stop,1: Input capture is not operated during count stop"
newline
bitfld.long 0x00 0. "CST,Count Start" "0: Count operation is stopped,1: Count operation is started"
group.long 0x30++0x03
line.long 0x00 "GTUDDTYC,General PWM Timer Count Direction and Duty Setting Register"
bitfld.long 0x00 27. "OBDTYR,Output after Release of GTIOCnB Pin Output 0%/100% Duty Cycle Settings" "0: The function selected by the GTIOR.GTIOB[3:2]..,1: The function selected by the GTIOR.GTIOB[3:2].."
bitfld.long 0x00 26. "OBDTYF,GTIOCnB Pin Output Duty Forced Setting" "0: Duty of the GTIOCnB pin output is not..,1: Duty of the GTIOCnB pin output is forcibly set"
newline
bitfld.long 0x00 24.--25. "OBDTY,GTIOCnB Pin Output Duty Setting" "0: Compare matches determine the duty cycle of..,1: Compare matches determine the duty cycle of..,2: The duty cycle of the output on the GTIOCnB..,3: The duty cycle of the output on the GTIOCnB.."
bitfld.long 0x00 19. "OADTYR,Output after Release of GTIOCnA Pin Output 0%/100% Duty Cycle Settings" "0: The function selected by the GTIOR.GTIOA[3:2]..,1: The function selected by the GTIOR.GTIOA[3:2].."
newline
bitfld.long 0x00 18. "OADTYF,GTIOCnA Pin Output Duty Forced Setting" "0: Duty of the GTIOCnA pin output is not..,1: Duty of the GTIOCnA pin output is forcibly set"
bitfld.long 0x00 16.--17. "OADTY,GTIOCnA Pin Output Duty Setting" "0: Compare matches determine the duty cycle of..,1: Compare matches determine the duty cycle of..,2: The duty cycle of the output on the GTIOCnA..,3: The duty cycle of the output on the GTIOCnA.."
newline
bitfld.long 0x00 1. "UDF,Forcible Count Direction Setting" "0: Count direction is not forcibly set,1: Count direction is forcibly set"
bitfld.long 0x00 0. "UD,Count Direction Setting" "0: GTCNT counts down,1: GTCNT counts up"
group.long 0x34++0x03
line.long 0x00 "GTIOR,General PWM Timer I/O Control Register"
bitfld.long 0x00 30.--31. "NFCSB,GTIOCnB Pin Input Noise Filter Sampling Clock Select" "0: Core clock,1: Core clock/4,2: Core clock/16,3: Core clock/64"
bitfld.long 0x00 29. "NFBEN,GTIOCnB Pin Input Noise Filter Enable" "0: The noise filter for GTIOCnB pin input is..,1: The noise filter for GTIOCnB pin input is.."
newline
bitfld.long 0x00 25.--26. "OBDF,GTIOCnB Pin Negate Value Setting" "0: None of the following sources is specified,1: GTIOCnB pin is placed in the Hi-Z state in..,2: GTIOCnB pin is set to 0 in response to..,3: GTIOCnB pin is set to 1 in response to.."
bitfld.long 0x00 24. "OBE,GTIOCnB Pin Output Enable" "0: Pin output is disabled,1: Pin output is enabled"
newline
bitfld.long 0x00 23. "OBHLD,GTIOCnB Pin Output Retention at the Start/Stop Count" "0: The GTIOCnB pin output level at start/stop of..,1: The GTIOCnB pin output level is retained at.."
bitfld.long 0x00 22. "OBDFLT,GTIOCnB Pin Output Value Setting at the Count Stop" "0: The GTIOCnB pin outputs low when counting is..,1: The GTIOCnB pin outputs high when counting is.."
newline
bitfld.long 0x00 16.--20. "GTIOB,GTIOCnB Pin Function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 14.--15. "NFCSA,GTIOCnA Pin Input Noise Filter Sampling Clock Select" "0: Core clock,1: Core clock/4,2: Core clock/16,3: Core clock/64"
newline
bitfld.long 0x00 13. "NFAEN,GTIOCnA Pin Input Noise Filter Enable" "0: The noise filter for GTIOCnA pin input is..,1: The noise filter for GTIOCnA pin input is.."
bitfld.long 0x00 9.--10. "OADF,GTIOCnA Pin Negate Value Setting" "0: None of the following sources is specified,1: GTIOCnA pin is placed in the Hi-Z state in..,2: GTIOCnA pin is set to 0 in response to..,3: GTIOCnA pin is set to 1 in response to.."
newline
bitfld.long 0x00 8. "OAE,GTIOCnA Pin Output Enable" "0: Pin output is disabled,1: Pin output is enabled"
bitfld.long 0x00 7. "OAHLD,GTIOCnA Pin Output Retention at the Start/Stop Count" "0: The GTIOCnA pin output level at start/stop of..,1: The GTIOCnA pin output level is retained at.."
newline
bitfld.long 0x00 6. "OADFLT,GTIOCnA Pin Output Value Setting at the Count Stop" "0: The GTIOCnA pin outputs low when counting is..,1: The GTIOCnA pin outputs high when counting is.."
bitfld.long 0x00 0.--4. "GTIOA,GTIOCnA Pin Function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x38++0x03
line.long 0x00 "GTINTAD,General PWM Timer Interrupt Output Setting Register"
bitfld.long 0x00 30. "GRPABL,(GTIOCnA pin and GTIOCnB output)" "0: Simultaneous low output stop detection is..,1: Simultaneous low output stop detection is.."
bitfld.long 0x00 29. "GRPABH,(GTIOCnA pin and GTIOCnB output)" "0: Simultaneous high output stop detection is..,1: Simultaneous high output stop detection is.."
newline
bitfld.long 0x00 28. "GRPDTE," "0: Dead time error output stop detection is..,1: Dead time error output stop detection is.."
bitfld.long 0x00 24.--25. "GRP,Select the group to detect disabling of output (dead-time error or simultaneous driving of outputs to the high or low level) to POEG and to request of disabling of output from POEG" "0: Group A is selected,1: Group B is selected,2: Group C is selected,3: Group D is selected"
newline
bitfld.long 0x00 19. "ADTRBDEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
bitfld.long 0x00 18. "ADTRBUEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
newline
bitfld.long 0x00 17. "ADTRADEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
bitfld.long 0x00 16. "ADTRAUEN," "0: A/D converter start request is disabled,1: A/D converter start request is enabled"
newline
bitfld.long 0x00 6.--7. "GTINTPR," "0: Interrupt request is disabled,1: In sawtooth-wave mode interrupt requests are..,2: In sawtooth-wave mode interrupt requests are..,3: In sawtooth-wave mode interrupt requests are.."
bitfld.long 0x00 5. "GTINTF," "0: Interrupt request is disabled,1: Interrupt request is enabled"
newline
bitfld.long 0x00 4. "GTINTE," "0: Interrupt request is disabled,1: Interrupt request is enabled"
bitfld.long 0x00 3. "GTINTD," "0: Interrupt request is disabled,1: Interrupt request is enabled"
newline
bitfld.long 0x00 2. "GTINTC," "0: Interrupt request is disabled,1: Interrupt request is enabled"
bitfld.long 0x00 1. "GTINTB," "0: Interrupt request is disabled,1: Interrupt request is enabled"
newline
bitfld.long 0x00 0. "GTINTA," "0: Interrupt request is disabled,1: Interrupt request is enabled"
group.long 0x3C++0x03
line.long 0x00 "GTST,General PWM Timer Status Register"
rbitfld.long 0x00 30. "OABLF,Simultaneous Low Output Flag" "0: No simultaneous generation of low output both..,1: A simultaneous generation of low output both.."
rbitfld.long 0x00 29. "OABHF,Simultaneous High Output Flag" "0: No simultaneous generation of high output..,1: A simultaneous generation of high output both.."
newline
rbitfld.long 0x00 28. "DTEF,Dead Time Error Flag" "0: No dead time error has occurred,1: A dead time error has occurred"
rbitfld.long 0x00 24. "ODF,Output Stop Request Flag" "0: No output stop request has occurred,1: An output stop request has occurred"
newline
bitfld.long 0x00 19. "ADTRBDF,GTADTRB Register Compare Match (Down-Counting) A/D Converter Start Request Flag" "0: No GTADTRB register compare match has..,1: A GTADTRB register compare match has occurred.."
bitfld.long 0x00 18. "ADTRBUF,GTADTRB Register Compare Match (Up-Counting) A/D Converter Start Request Flag" "0: No GTADTRB register compare match has..,1: A GTADTRB register compare match has occurred.."
newline
bitfld.long 0x00 17. "ADTRADF,GTADTRA Register Compare Match (Down-Counting) A/D Converter Start Request Flag" "0: No GTADTRA register compare match has..,1: A GTADTRA register compare match has occurred.."
bitfld.long 0x00 16. "ADTRAUF,GTADTRA Register Compare Match (Up-Counting) A/D Converter Start Request Flag" "0: No GTADTRA register compare match has..,1: A GTADTRA register compare match has occurred.."
newline
rbitfld.long 0x00 15. "TUCF,Count Direction Flag" "0: The GTCNT counter counts downward,1: The GTCNT counter counts upward"
rbitfld.long 0x00 8.--10. "ITCNT,GPTn_OVF/GPTn_UDF Interrupt Skipping Count Counter" "0,1,2,3,4,5,6,7"
group.long 0x40++0x03
line.long 0x00 "GTBER,General PWM Timer Buffer Enable Register"
bitfld.long 0x00 30. "ADTDB,GTADTRB Register Double Buffer Operation" "0: Single buffer operation (GTADTBRB register ?..,1: Double buffer operation (GTADTDBRB register ?.."
bitfld.long 0x00 28.--29. "ADTTB,GTADTRB Register Buffer Transfer Timing Select" "0: No transfer,1: (Triangle waves) Transfer at crest (Sawtooth..,2: (Triangle waves) Transfer at trough (Sawtooth..,3: (Triangle waves) Transfer at both crest and.."
newline
bitfld.long 0x00 26. "ADTDA,GTADTRA Register Double Buffer Operation" "0: Single buffer operation (GTADTBRA register ?..,1: Double buffer operation (GTADTDBRA register ?.."
bitfld.long 0x00 24.--25. "ADTTA,GTADTRA Register Buffer Transfer Timing Select" "0: No transfer,1: (Triangle waves) Transfer at crest (Sawtooth..,2: (Triangle waves) Transfer at trough (Sawtooth..,3: (Triangle waves) Transfer at both crest and.."
newline
bitfld.long 0x00 22. "CCRSWT,GTCCRA and GTCCRB Registers Forcible Buffer Operation" "0,1"
bitfld.long 0x00 20.--21. "PR,GTPR Register Buffer Operation" "0: Buffer operation is not performed,1: Single buffer operation (GTPBR register ?..,2: Double buffer operation (GTPDBR register ?..,3: Double buffer operation (GTPDBR register ?.."
newline
bitfld.long 0x00 18.--19. "CCRB,GTCCRB Register Buffer Operation" "0: Buffer operation is not performed,1: Single buffer operation (GTCCRB register ?..,2: Double buffer operation (GTCCRB register ?..,3: Double buffer operation (GTCCRB register ?.."
bitfld.long 0x00 16.--17. "CCRA,GTCCRA Register Buffer Operation" "0: Buffer operation is not performed,1: Single buffer operation (GTCCRA register ?..,2: Double buffer operation (GTCCRA register ?..,3: Double buffer operation (GTCCRA register ?.."
newline
bitfld.long 0x00 10. "DBRTECB,GTCCRB Register Double Buffer Repeat Operation Enable" "0: GTCCRB register double buffer repeat..,1: GTCCRB register double buffer repeat.."
bitfld.long 0x00 8. "DBRTECA,GTCCRA Register Double Buffer Repeat Operation Enable" "0: GTCCRA register double buffer repeat..,1: GTCCRA register double buffer repeat.."
newline
bitfld.long 0x00 3. "BD3,GTDVU/GTDVD Registers Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
bitfld.long 0x00 2. "BD2,GTADTRA/GTADTRB Registers Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
newline
bitfld.long 0x00 1. "BD1,GTPR Register Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
bitfld.long 0x00 0. "BD0,GTCCRA/GTCCRB Registers Buffer Operation Disable" "0: Buffer operation is enabled,1: Buffer operation is disabled"
group.long 0x44++0x03
line.long 0x00 "GTITC,General PWM Timer Interrupt and A/D Converter Start Request Skipping Setting Register"
bitfld.long 0x00 14. "ADTBL," "0: Not linked with GPTn_OVF/GPTn_UDF interrupt..,1: Linked with GPTn_OVF/GPTn_UDF interrupt.."
bitfld.long 0x00 12. "ADTAL," "0: Not linked with GPTn_OVF/GPTn_UDF interrupt..,1: Linked with GPTn_OVF/GPTn_UDF interrupt.."
newline
bitfld.long 0x00 8.--10. "IVTT," "0: Skipping is not performed,1: Skipping count of 1,2: Skipping count of 2,3: Skipping count of 3,4: Skipping count of 4,5: Skipping count of 5,6: Skipping count of 6,7: Skipping count of 7"
bitfld.long 0x00 6.--7. "IVTC," "0: Skipping is not performed,1: Both overflow and underflow for sawtooth..,2: Both overflow and underflow for sawtooth..,3: Both overflow and underflow for sawtooth.."
newline
bitfld.long 0x00 5. "ITLF," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
bitfld.long 0x00 4. "ITLE," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
newline
bitfld.long 0x00 3. "ITLD," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
bitfld.long 0x00 2. "ITLC," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
newline
bitfld.long 0x00 1. "ITLB," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
bitfld.long 0x00 0. "ITLA," "0: Not linked with GTPn_OVF/GTPn_UDF interrupt..,1: Linked with GTPn_OVF/GTPn_UDF interrupt.."
group.long 0x48++0x03
line.long 0x00 "GTCNT,General PWM Timer Counter"
group.long 0x4C++0x03
line.long 0x00 "GTCCRA,General PWM Timer Compare Capture Register A (m = A to F)"
group.long 0x50++0x03
line.long 0x00 "GTCCRB,General PWM Timer Compare Capture Register B (m = A to F)"
group.long 0x54++0x03
line.long 0x00 "GTCCRC,General PWM Timer Compare Capture Register C (m = A to F)"
group.long 0x58++0x03
line.long 0x00 "GTCCRE,General PWM Timer Compare Capture Register E (m = A to F)"
group.long 0x5C++0x03
line.long 0x00 "GTCCRD,General PWM Timer Compare Capture Register D (m = A to F)"
group.long 0x60++0x03
line.long 0x00 "GTCCRF,General PWM Timer Compare Capture Register F (m = A to F)"
group.long 0x64++0x03
line.long 0x00 "GTPR,General PWM Timer Cycle Setting Register"
group.long 0x68++0x03
line.long 0x00 "GTPBR,General PWM Timer Cycle Setting Buffer Register"
group.long 0x6C++0x03
line.long 0x00 "GTPDBR,General PWM Timer Cycle Setting Double-Buffer Register"
group.long 0x88++0x03
line.long 0x00 "GTDTCR,General PWM Timer Dead Time Control Register"
bitfld.long 0x00 8. "TDFER,GTDVD Register Setting" "0: GTDVU and GTDVD registers are set separately,1: The value written to GTDVU register is.."
bitfld.long 0x00 5. "TDBDE,GTDVD Register Buffer Operation Enable" "0: GTDVD register buffer operation is disabled,1: GTDVD register buffer operation is enabled"
newline
bitfld.long 0x00 4. "TDBUE,GTDVU Register Buffer Operation Enable" "0: GTDVU register buffer operation is disabled,1: GTDVU register buffer operation is enabled"
bitfld.long 0x00 0. "TDE,Negative-Phase Waveform Setting" "0: GTCCRB register is set without using GTDVU..,1: GTDVU and GTDVD registers are used to set the.."
group.long 0x8C++0x03
line.long 0x00 "GTDVU,General PWM Timer Dead Time Value Register U (m = U D)"
group.long 0x90++0x03
line.long 0x00 "GTDVD,General PWM Timer Dead Time Value Register D (m = U D)"
group.long 0x94++0x03
line.long 0x00 "GTDBU,General PWM Timer Dead Time Value Buffer Register U (m = U D)"
group.long 0x98++0x03
line.long 0x00 "GTDBD,General PWM Timer Dead Time Value Buffer Register D (m = U D)"
rgroup.long 0x9C++0x03
line.long 0x00 "GTSOS,General PWM Timer Output Protection Function Status Register"
bitfld.long 0x00 0.--1. "SOS,Output Protection Function Status" "0: Normal operation,1: Protected state (GTCCRA = 0 is set during..,2: Protected state (GTCCRA e GTPR is set during..,3: Protected state (GTCCRA e GTPR is set during.."
group.long 0xA0++0x03
line.long 0x00 "GTSOTR,General PWM Timer Output Protection Function Temporary Release Register"
bitfld.long 0x00 0. "SOTR,Output Protection Function Temporary Release" "0: Protected state is not released,1: Protected state is released"
group.long 0xA8++0x03
line.long 0x00 "GTEITC,General PWM Timer Extended Interrupt Skipping Counter Control Register"
rbitfld.long 0x00 28.--31. "EITCNT2,Extended Interrupt Skipping Counter 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "EITCNT2IV,Extended Interrupt Skipping Counter 2 Initial Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "EIVTT2,Extended Interrupt Skipping 2 Skipping Count Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--17. "EIVTC2,Extended Interrupt Skipping Counter 2 Count Source Select" "0: Not counted (not skipped),1: Counting both at overflow or underflow in..,2: Counting both at overflow or underflow in..,3: Counting both at overflow or underflow in.."
newline
rbitfld.long 0x00 12.--15. "EITCNT1,Extended Interrupt Skipping Counter 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "EIVTT1,Extended Interrupt Skipping 1 Skipping Count Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--1. "EIVTC1,Extended Interrupt Skipping Counter 1 Count Source Select" "0: Not counted (not skipped),1: Counting both at overflow or underflow in..,2: Counting both at overflow or underflow in..,3: Counting both at overflow or underflow in.."
group.long 0xAC++0x03
line.long 0x00 "GTEITLI1,General PWM Timer Extended Interrupt Skipping Setting Register 1"
bitfld.long 0x00 28.--30. "EITLU,Underflow Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "EITLV,Overflow Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "EITLF,GTCCRF Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "EITLE,GTCCRE Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "EITLD,GTCCRD Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "EITLC,GTCCRC Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "EITLB,GTCCRB Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EITLA,GTCCRA Register Compare Match / Input Capture Interrupt Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
group.long 0xB0++0x03
line.long 0x00 "GTEITLI2,General PWM Timer Extended Interrupt Skipping Setting Register 2"
bitfld.long 0x00 4.--6. "EADTBL,GTADTRB A/D Converter Start Request Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "EADTAL,GTADTRA A/D Converter Start Request Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
group.long 0xB4++0x03
line.long 0x00 "GTEITLB,General PWM Timer Extended Buffer Transfer Skipping Setting Register"
bitfld.long 0x00 28.--30. "EBTLDVD,GTDVD Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "EBTLDVU,GTDVU Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "EBTLADB,GTADTRB Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "EBTLADA,GTADTRA Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--10. "EBTLPR,GTPR Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "EBTLCB,GTCCRB Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--2. "EBTLCA,GTCCRA Register Buffer Transfer Extended Skipping Function Select" "0,1,2,3,4,5,6,7"
group.long 0xD0++0x03
line.long 0x00 "GTSECSR,General PWM Timer Operation Enable Bit Simultaneous Control Channel Select Register"
bitfld.long 0x00 6. "SECSEL6,Channel 6 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
bitfld.long 0x00 5. "SECSEL5,Channel 5 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
newline
bitfld.long 0x00 4. "SECSEL4,Channel 4 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
bitfld.long 0x00 3. "SECSEL3,Channel 3 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
newline
bitfld.long 0x00 2. "SECSEL2,Channel 2 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
bitfld.long 0x00 1. "SECSEL1,Channel 1 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
newline
bitfld.long 0x00 0. "SECSEL0,Channel 0 Operation Enable Bit Simultaneous Control Channel Select" "0: Disable simultaneous control,1: Enable simultaneous control"
group.long 0xD4++0x03
line.long 0x00 "GTSECR,General PWM Timer Operation Enable Bit Simultaneous Control Register"
bitfld.long 0x00 11. "SBDDD,GTDV Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTDV buffer..,1: Disable GTDV register buffer operations.."
bitfld.long 0x00 10. "SBDAD,GTADTR Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTADTR buffer..,1: Disable GTADTR register buffer operations.."
newline
bitfld.long 0x00 9. "SBDPD,GTPR Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTPR buffer..,1: Disable GTPR register buffer operations.."
bitfld.long 0x00 8. "SBDCD,GTCCR Register Buffer Operation Simultaneous Disable" "0: Disable simultaneous disabling GTCCR buffer..,1: Disable GTCCR register buffer operations.."
newline
bitfld.long 0x00 3. "SBDDE,GTDV Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTDV buffer..,1: Enable GTDV register buffer operations.."
bitfld.long 0x00 2. "SBDAE,GTADTR Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTADTR buffer..,1: Enable GTADTR register buffer operations.."
newline
bitfld.long 0x00 1. "SBDPE,GTPR Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTPR buffer..,1: Enable GTPR register buffer operations.."
bitfld.long 0x00 0. "SBDCE,GTCCR Register Buffer Operation Simultaneous Enable" "0: Disable simultaneous enabling GTCCR buffer..,1: Enable GTCCR register buffer operations.."
group.long 0xD8++0x03
line.long 0x00 "GTSWSR,General PWM Timer Switch Source Select Register"
bitfld.long 0x00 23. "CSELCH,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event H..,1: Enables count switch by the LLPP GPT event H.."
bitfld.long 0x00 22. "WSELCG,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event G..,1: Enables count switch by the LLPP GPT event G.."
newline
bitfld.long 0x00 21. "WSELCF,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event F..,1: Enables count switch by the LLPP GPT event F.."
bitfld.long 0x00 20. "WSELCE,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event E..,1: Enables count switch by the LLPP GPT event E.."
newline
bitfld.long 0x00 19. "WSELCD,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event D..,1: Enables count switch by the LLPP GPT event D.."
bitfld.long 0x00 18. "WSELCC,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event C..,1: Enables count switch by the LLPP GPT event C.."
newline
bitfld.long 0x00 17. "WSELCB,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event B..,1: Enables count switch by the LLPP GPT event B.."
bitfld.long 0x00 16. "WSELCA,Event Source Counter Switch Enable" "0: Disables count switch by the LLPP GPT event A..,1: Enables count switch by the LLPP GPT event A.."
newline
bitfld.long 0x00 6.--7. "WSGTRGD,GTETRGD Signal Edge Select to Switch Counter (GTETRGSD Signal for SAFTY)" "0: The GTETRGD signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
bitfld.long 0x00 4.--5. "WSGTRGC,GTETRGC Signal Edge Select to Switch Counter (GTETRGSC Signal for SAFTY)" "0: The GTETRGC signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
newline
bitfld.long 0x00 2.--3. "WSGTRGB,GTETRGB Signal Edge Select to Switch Counter (GTETRGSB Signal for SAFTY)" "0: The GTETRGB signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
bitfld.long 0x00 0.--1. "WSGTRGA,GTETRGA Signal Edge Select to Switch Counter (GTETRGSA Signal for SAFTY)" "0: The GTETRGA signal is not used as a trigger..,1: The counter is switched at a rising edge of..,2: The counter is switched at a falling edge of..,3: The counter is switched at both edges of the.."
group.long 0xDC++0x03
line.long 0x00 "GTSWOS,General PWM Timer Switch Offset Setting Register"
tree.end
repeat.end
tree.end
tree "GSC (Global System Counter)"
base ad:0xC0060000
group.long 0x00++0x03
line.long 0x00 "CNTCR,Global System Counter Control Register"
bitfld.long 0x00 1. "HDBG,Halt on Debug" "0: Do not halt on debug HLTDBG signal into the..,1: Halt on debug when HLTDBG is driven high the.."
bitfld.long 0x00 0. "EN,Counter Enable" "0: The counter is disabled and not incrementing,1: The counter is enabled and is incrementing"
rgroup.long 0x04++0x03
line.long 0x00 "CNTSR,Global System Counter Status Register"
bitfld.long 0x00 1. "DBGH,Debug Halted" "0: Not halt on debug,1: Halt on debug"
group.long 0x08++0x03
line.long 0x00 "CNTCVL,Global System Counter Current Value Lower Register"
hexmask.long 0x00 0.--31. 1. "CNTCVL_L_32,Current value of the counter lower 32 bits"
group.long 0x0C++0x03
line.long 0x00 "CNTCVU,Global System Counter Current Value Upper Register"
hexmask.long 0x00 0.--31. 1. "CNTCVU_U_32,Current value of the counter upper 32 bits"
group.long 0x20++0x03
line.long 0x00 "CNTFID0,Global System Counter Base Frequency ID Register"
hexmask.long 0x00 0.--31. 1. "FREQ,Frequency in number of ticks per second"
tree.end
tree "ICU (Interrupt Controller)"
base ad:0x81048000
wgroup.long 0x00++0x03
line.long 0x00 "S_SWINT,Software Interrupt Register for Safety Register"
bitfld.long 0x00 1. "IC7,Software Interrupt register" "0,1"
bitfld.long 0x00 0. "IC6,Software Interrupt register" "0,1"
group.long 0x04++0x03
line.long 0x00 "S_PORTNF_FLTSEL,Interrupt Noise Filter Enable Register for Safety Register"
bitfld.long 0x00 2. "FLTNMI,Noise filter enable for NMI" "0: Disable,1: Enable"
bitfld.long 0x00 1. "FLT15,Noise filter enable for IRQ15" "0: Disable,1: Enable"
bitfld.long 0x00 0. "FLT14,Noise filter enable for IRQ14" "0: Disable,1: Enable"
group.long 0x08++0x03
line.long 0x00 "S_PORTNF_CLKSEL,Interrupt Noise Filter Setting Register for Safety Register"
bitfld.long 0x00 4.--5. "CKSELNMI,Select noise filter sampling frequency dividend rate for NMI" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 2.--3. "CKSEL15,Select noise filter sampling frequency dividend rate for IRQ15" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 0.--1. "CKSEL14,Select noise filter sampling frequency dividend rate for IRQ14" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
group.long 0x0C++0x03
line.long 0x00 "S_PORTNF_MD,Interrupt Edge Detection Setting Register for Safety Register"
bitfld.long 0x00 4.--5. "MDNMI,Select detection mode for NMI" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 2.--3. "MD15,Select detection mode for IRQ15" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 0.--1. "MD14,Select detection mode for IRQ14" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
rgroup.long 0x60++0x03
line.long 0x00 "CPU0ERR_STAT,CPU0 Error Event Status Register"
bitfld.long 0x00 25. "ER_ST25,Indicate captured error status for CPU0_ERREVENT25" "0: No error,1: Error occurred"
bitfld.long 0x00 24. "ER_ST24,Indicate captured error status for CPU0_ERREVENT24" "0: No error,1: Error occurred"
bitfld.long 0x00 23. "ER_ST23,Indicate captured error status for CPU0_ERREVENT23" "0: No error,1: Error occurred"
bitfld.long 0x00 22. "ER_ST22,Indicate captured error status for CPU0_ERREVENT22" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 21. "ER_ST21,Indicate captured error status for CPU0_ERREVENT21" "0: No error,1: Error occurred"
bitfld.long 0x00 20. "ER_ST20,Indicate captured error status for CPU0_ERREVENT20" "0: No error,1: Error occurred"
bitfld.long 0x00 19. "ER_ST19,Indicate captured error status for CPU0_ERREVENT19" "0: No error,1: Error occurred"
bitfld.long 0x00 18. "ER_ST18,Indicate captured error status for CPU0_ERREVENT18" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 17. "ER_ST17,Indicate captured error status for CPU0_ERREVENT17" "0: No error,1: Error occurred"
bitfld.long 0x00 16. "ER_ST16,Indicate captured error status for CPU0_ERREVENT16" "0: No error,1: Error occurred"
bitfld.long 0x00 15. "ER_ST15,Indicate captured error status for CPU0_ERREVENT15" "0: No error,1: Error occurred"
bitfld.long 0x00 14. "ER_ST14,Indicate captured error status for CPU0_ERREVENT14" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 13. "ER_ST13,Indicate captured error status for CPU0_ERREVENT13" "0: No error,1: Error occurred"
bitfld.long 0x00 12. "ER_ST12,Indicate captured error status for CPU0_ERREVENT12" "0: No error,1: Error occurred"
bitfld.long 0x00 11. "ER_ST11,Indicate captured error status for CPU0_ERREVENT11" "0: No error,1: Error occurred"
bitfld.long 0x00 10. "ER_ST10,Indicate captured error status for CPU0_ERREVENT10" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 9. "ER_ST9,Indicate captured error status for CPU0_ERREVENT9" "0: No error,1: Error occurred"
bitfld.long 0x00 8. "ER_ST8,Indicate captured error status for CPU0_ERREVENT8" "0: No error,1: Error occurred"
bitfld.long 0x00 7. "ER_ST7,Indicate captured error status for CPU0_ERREVENT7" "0: No error,1: Error occurred"
bitfld.long 0x00 6. "ER_ST6,Indicate captured error status for CPU0_ERREVENT6" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 5. "ER_ST5,Indicate captured error status for CPU0_ERREVENT5" "0: No error,1: Error occurred"
bitfld.long 0x00 4. "ER_ST4,Indicate captured error status for CPU0_ERREVENT4" "0: No error,1: Error occurred"
bitfld.long 0x00 3. "ER_ST3,Indicate captured error status for CPU0_ERREVENT3" "0: No error,1: Error occurred"
bitfld.long 0x00 2. "ER_ST2,Indicate captured error status for CPU0_ERREVENT2" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 1. "ER_ST1,Indicate captured error status for CPU0_ERREVENT1" "0: No error,1: Error occurred"
bitfld.long 0x00 0. "ER_ST0,Indicate captured error status for CPU0_ERREVENT0" "0: No error,1: Error occurred"
rgroup.long 0x68++0x03
line.long 0x00 "PERIERR_STAT0,Peripheral Error Event Status Register 0"
bitfld.long 0x00 31. "ER_ST31,Indicate captured error status for DSMIF1_SCDE2" "0: No error,1: Error occurred"
bitfld.long 0x00 30. "ER_ST30,Indicate captured error status for DSMIF1_SCDE1" "0: No error,1: Error occurred"
bitfld.long 0x00 29. "ER_ST29,Indicate captured error status for DSMIF1_SCDE0" "0: No error,1: Error occurred"
bitfld.long 0x00 28. "ER_ST28,Indicate captured error status for DSMIF1_UTODE2" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 27. "ER_ST27,Indicate captured error status for DSMIF1_UTODE1" "0: No error,1: Error occurred"
bitfld.long 0x00 26. "ER_ST26,Indicate captured error status for DSMIF1_UTODE0" "0: No error,1: Error occurred"
bitfld.long 0x00 25. "ER_ST25,Indicate captured error status for DSMIF1_LTODE2" "0: No error,1: Error occurred"
bitfld.long 0x00 24. "ER_ST24,Indicate captured error status for DSMIF1_LTODE1" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 23. "ER_ST23,Indicate captured error status for DSMIF1_LTODE0" "0: No error,1: Error occurred"
bitfld.long 0x00 22. "ER_ST22,Indicate captured error status for DSMIF1_UTCSE" "0: No error,1: Error occurred"
bitfld.long 0x00 21. "ER_ST21,Indicate captured error status for DSMIF1_LTCSE" "0: No error,1: Error occurred"
bitfld.long 0x00 20. "ER_ST20,Indicate captured error status for DSMIF0_SCDE2" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 19. "ER_ST19,Indicate captured error status for DSMIF0_SCDE1" "0: No error,1: Error occurred"
bitfld.long 0x00 18. "ER_ST18,Indicate captured error status for DSMIF0_SCDE0" "0: No error,1: Error occurred"
bitfld.long 0x00 17. "ER_ST17,Indicate captured error status for DSMIF0_UTODE2" "0: No error,1: Error occurred"
bitfld.long 0x00 16. "ER_ST16,Indicate captured error status for DSMIF0_UTODE1" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 15. "ER_ST15,Indicate captured error status for DSMIF0_UTODE0" "0: No error,1: Error occurred"
bitfld.long 0x00 14. "ER_ST14,Indicate captured error status for DSMIF0_LTODE2" "0: No error,1: Error occurred"
bitfld.long 0x00 13. "ER_ST13,Indicate captured error status for DSMIF0_LTODE1" "0: No error,1: Error occurred"
bitfld.long 0x00 12. "ER_ST12,Indicate captured error status for DSMIF0_LTODE0" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 11. "ER_ST11,Indicate captured error status for DSMIF0_UTCSE" "0: No error,1: Error occurred"
bitfld.long 0x00 10. "ER_ST10,Indicate captured error status for DSMIF0_LTCSE" "0: No error,1: Error occurred"
bitfld.long 0x00 9. "ER_ST9,Indicate captured error status for USB_FDMAERR" "0: No error,1: Error occurred"
bitfld.long 0x00 7. "ER_ST7,Indicate captured error status for WDT_NMIUNDF0" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 6. "ER_ST6,Indicate captured error status for DMAC1_ERR" "0: No error,1: Error occurred"
bitfld.long 0x00 5. "ER_ST5,Indicate captured error status for DMAC0_ERR" "0: No error,1: Error occurred"
bitfld.long 0x00 4. "ER_ST4,Indicate captured error status for BSC_WTO" "0: No error,1: Error occurred"
bitfld.long 0x00 3. "ER_ST3,Indicate captured error status for CLMA2_INT" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 2. "ER_ST2,Indicate captured error status for CLMA1_INT" "0: No error,1: Error occurred"
bitfld.long 0x00 1. "ER_ST1,Indicate captured error status for CLMA0_INT" "0: No error,1: Error occurred"
bitfld.long 0x00 0. "ER_ST0,Indicate captured error status for CLMA3_INT" "0: No error,1: Error occurred"
rgroup.long 0x6C++0x03
line.long 0x00 "PERIERR_STAT1,Peripheral Error Event Status Register 1"
bitfld.long 0x00 28. "ER_ST28,Indicate captured error status for MPU_DBGW" "0: No error,1: Error occurred"
bitfld.long 0x00 27. "ER_ST27,Indicate captured error status for MPU_DBGR" "0: No error,1: Error occurred"
bitfld.long 0x00 24. "ER_ST24,Indicate captured error status for MPU_USBF" "0: No error,1: Error occurred"
bitfld.long 0x00 23. "ER_ST23,Indicate captured error status for MPU_USBH" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 22. "ER_ST22,Indicate captured error status for MPU_GMACW" "0: No error,1: Error occurred"
bitfld.long 0x00 21. "ER_ST21,Indicate captured error status for MPU_GMACR" "0: No error,1: Error occurred"
bitfld.long 0x00 20. "ER_ST20,Indicate captured error status for MPU_DMACW1" "0: No error,1: Error occurred"
bitfld.long 0x00 19. "ER_ST19,Indicate captured error status for MPU_DMACR1" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 18. "ER_ST18,Indicate captured error status for MPU_DMACW0" "0: No error,1: Error occurred"
bitfld.long 0x00 17. "ER_ST17,Indicate captured error status for MPU_DMACR0" "0: No error,1: Error occurred"
bitfld.long 0x00 16. "ER_ST16,Indicate captured error status for MPU_PHOSTIF" "0: No error,1: Error occurred"
bitfld.long 0x00 15. "ER_ST15,Indicate captured error status for MPU_SHOSTIF" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 13. "ER_ST13,Indicate captured error status for BUS_ERRINT" "0: No error,1: Error occurred"
bitfld.long 0x00 9. "ER_ST9,Indicate captured error status for SRAM2_OVF" "0: No error,1: Error occurred"
bitfld.long 0x00 8. "ER_ST8,Indicate captured error status for SRAM2_IE2" "0: No error,1: Error occurred"
bitfld.long 0x00 7. "ER_ST7,Indicate captured error status for SRAM2_IE1" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 6. "ER_ST6,Indicate captured error status for SRAM1_OVF" "0: No error,1: Error occurred"
bitfld.long 0x00 5. "ER_ST5,Indicate captured error status for SRAM1_IE2" "0: No error,1: Error occurred"
bitfld.long 0x00 4. "ER_ST4,Indicate captured error status for SRAM1_IE1" "0: No error,1: Error occurred"
bitfld.long 0x00 3. "ER_ST3,Indicate captured error status for SRAM0_OVF" "0: No error,1: Error occurred"
newline
bitfld.long 0x00 2. "ER_ST2,Indicate captured error status for SRAM0_IE2" "0: No error,1: Error occurred"
bitfld.long 0x00 1. "ER_ST1,Indicate captured error status for SRAM0_IE1" "0: No error,1: Error occurred"
bitfld.long 0x00 0. "ER_ST0,Indicate captured error status for DOC_DOPCI" "0: No error,1: Error occurred"
wgroup.long 0x70++0x03
line.long 0x00 "CPU0ERR_CLR,CPU0 Error Event Status Clear Register"
bitfld.long 0x00 25. "ER_CL25,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 24. "ER_CL24,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 23. "ER_CL23,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 22. "ER_CL22,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
newline
bitfld.long 0x00 21. "ER_CL21,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 20. "ER_CL20,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 19. "ER_CL19,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 18. "ER_CL18,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
newline
bitfld.long 0x00 17. "ER_CL17," "0,1"
bitfld.long 0x00 16. "ER_CL16,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 15. "ER_CL15,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 14. "ER_CL14,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
newline
bitfld.long 0x00 13. "ER_CL13,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 12. "ER_CL12,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 11. "ER_CL11,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 10. "ER_CL10,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
newline
bitfld.long 0x00 9. "ER_CL9,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 8. "ER_CL8,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 7. "ER_CL7,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 6. "ER_CL6,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
newline
bitfld.long 0x00 5. "ER_CL5,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 4. "ER_CL4,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 3. "ER_CL3,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 2. "ER_CL2,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
newline
bitfld.long 0x00 1. "ER_CL1,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
bitfld.long 0x00 0. "ER_CL0,Clear captured error status for CPU0ERR_STAT register by writing 1" "0,1"
wgroup.long 0x78++0x03
line.long 0x00 "PERIERR_CLR0,Peripheral Error Event Status Clear Register 0"
bitfld.long 0x00 31. "ER_CL31,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 30. "ER_CL30,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 29. "ER_CL29,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 28. "ER_CL28,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 27. "ER_CL27,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 26. "ER_CL26,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 25. "ER_CL25,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 24. "ER_CL24,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 23. "ER_CL23,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 22. "ER_CL22,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 21. "ER_CL21,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 20. "ER_CL20,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 19. "ER_CL19,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 18. "ER_CL18,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 17. "ER_CL17,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 16. "ER_CL16,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 15. "ER_CL15,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 14. "ER_CL14,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 13. "ER_CL13,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 12. "ER_CL12,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 11. "ER_CL11,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 10. "ER_CL10,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 9. "ER_CL9,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 7. "ER_CL7,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 6. "ER_CL6,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 5. "ER_CL5,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 4. "ER_CL4,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 3. "ER_CL3,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
newline
bitfld.long 0x00 2. "ER_CL2,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 1. "ER_CL1,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
bitfld.long 0x00 0. "ER_CL0,Clear captured error status for PERIERR_STAT0 register by writing 1" "0,1"
wgroup.long 0x7C++0x03
line.long 0x00 "PERIERR_CLR1,Peripheral Error Event Status Clear Register 1"
bitfld.long 0x00 28. "ER_CL28,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 27. "ER_CL27,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 24. "ER_CL24,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 23. "ER_CL23,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
newline
bitfld.long 0x00 22. "ER_CL22,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 21. "ER_CL21,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 20. "ER_CL20,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 19. "ER_CL19,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
newline
bitfld.long 0x00 18. "ER_CL18,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 17. "ER_CL17,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 16. "ER_CL16,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 15. "ER_CL15,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
newline
bitfld.long 0x00 13. "ER_CL13,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 9. "ER_CL9,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 8. "ER_CL8,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 7. "ER_CL7,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
newline
bitfld.long 0x00 6. "ER_CL6,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 5. "ER_CL5,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 4. "ER_CL4,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 3. "ER_CL3,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
newline
bitfld.long 0x00 2. "ER_CL2,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 1. "ER_CL1,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
bitfld.long 0x00 0. "ER_CL0,Clear captured error status for PERIERR_STAT1 register by writing 1" "0,1"
group.long 0x80++0x03
line.long 0x00 "CPU0ERR_RSTMSK,CPU0 Error Event Reset Mask Register"
bitfld.long 0x00 25. "RS_MK25,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 24. "RS_MK24,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 23. "RS_MK23,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 22. "RS_MK22,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 21. "RS_MK21,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 20. "RS_MK20,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 19. "RS_MK19,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 18. "RS_MK18,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 17. "RS_MK17,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 16. "RS_MK16,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 15. "RS_MK15,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 14. "RS_MK14,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 13. "RS_MK13,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 12. "RS_MK12,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 11. "RS_MK11,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 10. "RS_MK10,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 9. "RS_MK9,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 8. "RS_MK8,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 7. "RS_MK7,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 6. "RS_MK6,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 5. "RS_MK5,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 4. "RS_MK4,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 3. "RS_MK3,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 2. "RS_MK2,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 1. "RS_MK1,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 0. "RS_MK0,Mask captured error status as a reset event for CPU0ERR_STAT" "0: Release,1: Mask"
group.long 0x88++0x03
line.long 0x00 "PERIERR_RSTMSK0,Peripheral Error Event Reset Mask Register 0"
bitfld.long 0x00 31. "RS_MK31,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 30. "RS_MK30,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 29. "RS_MK29,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 28. "RS_MK28,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 27. "RS_MK27,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 26. "RS_MK26,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 25. "RS_MK25,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 24. "RS_MK24,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 23. "RS_MK23,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 22. "RS_MK22,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 21. "RS_MK21,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 20. "RS_MK20,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 19. "RS_MK19,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 18. "RS_MK18,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 17. "RS_MK17,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 16. "RS_MK16,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 15. "RS_MK15,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 14. "RS_MK14,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 13. "RS_MK13,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 12. "RS_MK12,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 11. "RS_MK11,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 10. "RS_MK10,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 9. "RS_MK9,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 7. "RS_MK7,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 6. "RS_MK6,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 5. "RS_MK5,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 4. "RS_MK4,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 3. "RS_MK3,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 2. "RS_MK2,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 1. "RS_MK1,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 0. "RS_MK0,Mask captured error status as a reset event for PERIERR_STAT0" "0: Release,1: Mask"
group.long 0x8C++0x03
line.long 0x00 "PERIERR_RSTMSK1,Peripheral Error Event Reset Mask Register 1"
bitfld.long 0x00 28. "RS_MK28,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 27. "RS_MK27,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 24. "RS_MK24,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 23. "RS_MK23,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 22. "RS_MK22,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 21. "RS_MK21,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 20. "RS_MK20,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 19. "RS_MK19,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 18. "RS_MK18,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 17. "RS_MK17,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 16. "RS_MK16,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 15. "RS_MK15,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 13. "RS_MK13,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 9. "RS_MK9,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 8. "RS_MK8,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 7. "RS_MK7,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 6. "RS_MK6,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 5. "RS_MK5,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 4. "RS_MK4,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 3. "RS_MK3,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 2. "RS_MK2,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 1. "RS_MK1,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 0. "RS_MK0,Mask captured error status as a reset event for PERIERR_STAT1" "0: Release,1: Mask"
group.long 0x90++0x03
line.long 0x00 "CPU0ERR_E0MSK,CPU0 E0 Error Event Mask Register"
bitfld.long 0x00 25. "E0_MK25,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 24. "E0_MK24,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 23. "E0_MK23,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 22. "E0_MK22,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 21. "E0_MK21,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 20. "E0_MK20,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 19. "E0_MK19,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 18. "E0_MK18,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 17. "E0_MK17,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 16. "E0_MK16,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 15. "E0_MK15,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 14. "E0_MK14,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 13. "E0_MK13,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 12. "E0_MK12,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 11. "E0_MK11,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 10. "E0_MK10,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 9. "E0_MK9,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 8. "E0_MK8,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 7. "E0_MK7,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 6. "E0_MK6,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 5. "E0_MK5,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 4. "E0_MK4,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 3. "E0_MK3,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 2. "E0_MK2,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 1. "E0_MK1,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 0. "E0_MK0,Mask captured error status as an CPU0_ERR0 event for CPU0ERR_STAT" "0: Release,1: Mask"
group.long 0x98++0x03
line.long 0x00 "PERIERR_E0MSK0,Peripheral E0 Error Event Mask Register 0"
bitfld.long 0x00 31. "E0_MK31,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 30. "E0_MK30,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 29. "E0_MK29,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 28. "E0_MK28,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 27. "E0_MK27,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 26. "E0_MK26,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 25. "E0_MK25,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 24. "E0_MK24,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 23. "E0_MK23,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 22. "E0_MK22,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 21. "E0_MK21,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 20. "E0_MK20,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 19. "E0_MK19,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 18. "E0_MK18,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 17. "E0_MK17,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 16. "E0_MK16,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 15. "E0_MK15,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 14. "E0_MK14,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 13. "E0_MK13,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 12. "E0_MK12,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 11. "E0_MK11,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 10. "E0_MK10,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 9. "E0_MK9,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 7. "E0_MK7,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 6. "E0_MK6,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 5. "E0_MK5,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 4. "E0_MK4,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 3. "E0_MK3,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 2. "E0_MK2,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 1. "E0_MK1,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 0. "E0_MK0,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT0" "0: Release,1: Mask"
group.long 0x9C++0x03
line.long 0x00 "PERIERR_E0MSK1,Peripheral E0 Error Event Mask Register 1"
bitfld.long 0x00 28. "E0_MK28,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 27. "E0_MK27,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 24. "E0_MK24,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 23. "E0_MK23,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 22. "E0_MK22,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 21. "E0_MK21,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 20. "E0_MK20,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 19. "E0_MK19,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 18. "E0_MK18,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 17. "E0_MK17,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 16. "E0_MK16,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 15. "E0_MK15,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 13. "E0_MK13,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 9. "E0_MK9,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 8. "E0_MK8,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 7. "E0_MK7,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 6. "E0_MK6,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 5. "E0_MK5,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 4. "E0_MK4,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 3. "E0_MK3,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 2. "E0_MK2,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 1. "E0_MK1,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 0. "E0_MK0,Mask captured error status as an PERI_ERR0 event for PERIERR_STAT1" "0: Release,1: Mask"
group.long 0x100++0x03
line.long 0x00 "CPU0ERR_E1MSK,CPU0 E1 Error Event Mask Register"
bitfld.long 0x00 25. "E1_MK25,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 24. "E1_MK24,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 23. "E1_MK23,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 22. "E1_MK22,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 21. "E1_MK21,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 20. "E1_MK20,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 19. "E1_MK19,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 18. "E1_MK18,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 17. "E1_MK17,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 16. "E1_MK16,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 15. "E1_MK15,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 14. "E1_MK14,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 13. "E1_MK13,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 12. "E1_MK12,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 11. "E1_MK11,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 10. "E1_MK10,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 9. "E1_MK9,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 8. "E1_MK8,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 7. "E1_MK7,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 6. "E1_MK6,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 5. "E1_MK5,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 4. "E1_MK4,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 3. "E1_MK3,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 2. "E1_MK2,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
newline
bitfld.long 0x00 1. "E1_MK1,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
bitfld.long 0x00 0. "E1_MK0,Mask captured error status as an CPU0_ERR1 event for CPU0ERR_STAT" "0: Release,1: Mask"
group.long 0x108++0x03
line.long 0x00 "PERIERR_E1MSK0,Peripheral E1 Error Event Mask Register 0"
bitfld.long 0x00 31. "E1_MK31,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 30. "E1_MK30,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 29. "E1_MK29,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 28. "E1_MK28,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 27. "E1_MK27,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 26. "E1_MK26,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 25. "E1_MK25,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 24. "E1_MK24,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 23. "E1_MK23,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 22. "E1_MK22,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 21. "E1_MK21,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 20. "E1_MK20,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 19. "E1_MK19,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 18. "E1_MK18,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 17. "E1_MK17,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 16. "E1_MK16,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 15. "E1_MK15,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 14. "E1_MK14,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 13. "E1_MK13,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 12. "E1_MK12,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 11. "E1_MK11,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 10. "E1_MK10,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 9. "E1_MK9,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 7. "E1_MK7,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 6. "E1_MK6,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 5. "E1_MK5,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 4. "E1_MK4,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 3. "E1_MK3,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
newline
bitfld.long 0x00 2. "E1_MK2,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 1. "E1_MK1,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
bitfld.long 0x00 0. "E1_MK0,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT0" "0: Release,1: Mask"
group.long 0x10C++0x03
line.long 0x00 "PERIERR_E1MSK1,Peripheral E1 Error Event Mask Register 1"
bitfld.long 0x00 28. "E1_MK28,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 27. "E1_MK27,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 24. "E1_MK24,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 23. "E1_MK23,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 22. "E1_MK22,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 21. "E1_MK21,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 20. "E1_MK20,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 19. "E1_MK19,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 18. "E1_MK18,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 17. "E1_MK17,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 16. "E1_MK16,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 15. "E1_MK15,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 13. "E1_MK13,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 9. "E1_MK9,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 8. "E1_MK8,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 7. "E1_MK7,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 6. "E1_MK6,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 5. "E1_MK5,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 4. "E1_MK4,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 3. "E1_MK3,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
newline
bitfld.long 0x00 2. "E1_MK2,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 1. "E1_MK1,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
bitfld.long 0x00 0. "E1_MK0,Mask captured error status as an PERI_ERR1 event for PERIERR_STAT1" "0: Release,1: Mask"
tree.end
tree "ICU_NS (Interrupt Controller in Non Safety Domain)"
base ad:0x80090000
wgroup.long 0x00++0x03
line.long 0x00 "NS_SWINT,Software Interrupt Register"
bitfld.long 0x00 5. "IC5,Software Interrupt register" "0,1"
bitfld.long 0x00 4. "IC4,Software Interrupt register" "0,1"
bitfld.long 0x00 3. "IC3,Software Interrupt register" "0,1"
newline
bitfld.long 0x00 2. "IC2,Software Interrupt register" "0,1"
bitfld.long 0x00 1. "IC1,Software Interrupt register" "0,1"
bitfld.long 0x00 0. "IC0,Software Interrupt register" "0,1"
group.long 0x04++0x03
line.long 0x00 "NS_PORTNF_FLTSEL,Interrupt Noise Filter Enable Register"
bitfld.long 0x00 14. "FLTDRQ,Noise filter enable for External DMA request (DREQ)" "0: Disable,1: Enable"
bitfld.long 0x00 13. "FLT13,Noise filter enable for IRQ13" "0: Disable,1: Enable"
bitfld.long 0x00 12. "FLT12,Noise filter enable for IRQ12" "0: Disable,1: Enable"
newline
bitfld.long 0x00 11. "FLT11,Noise filter enable for IRQ11" "0: Disable,1: Enable"
bitfld.long 0x00 10. "FLT10,Noise filter enable for IRQ10" "0: Disable,1: Enable"
bitfld.long 0x00 9. "FLT9,Noise filter enable for IRQ9" "0: Disable,1: Enable"
newline
bitfld.long 0x00 8. "FLT8,Noise filter enable for IRQ8" "0: Disable,1: Enable"
bitfld.long 0x00 7. "FLT7,Noise filter enable for IRQ7" "0: Disable,1: Enable"
bitfld.long 0x00 6. "FLT6,Noise filter enable for IRQ6" "0: Disable,1: Enable"
newline
bitfld.long 0x00 5. "FLT5,Noise filter enable for IRQ5" "0: Disable,1: Enable"
bitfld.long 0x00 4. "FLT4,Noise filter enable for IRQ4" "0: Disable,1: Enable"
bitfld.long 0x00 3. "FLT3,Noise filter enable for IRQ3" "0: Disable,1: Enable"
newline
bitfld.long 0x00 2. "FLT2,Noise filter enable for IRQ2" "0: Disable,1: Enable"
bitfld.long 0x00 1. "FLT1,Noise filter enable for IRQ1" "0: Disable,1: Enable"
bitfld.long 0x00 0. "FLT0,Noise filter enable for IRQ0" "0: Disable,1: Enable"
group.long 0x08++0x03
line.long 0x00 "NS_PORTNF_CLKSEL,Interrupt Noise Filter Setting Register"
bitfld.long 0x00 28.--29. "CKSELDREQ,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 26.--27. "CKSEL13,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 24.--25. "CKSEL12,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
newline
bitfld.long 0x00 22.--23. "CKSEL11,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 20.--21. "CKSEL10,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 18.--19. "CKSEL9,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
newline
bitfld.long 0x00 16.--17. "CKSEL8,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 14.--15. "CKSEL7,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 12.--13. "CKSEL6,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
newline
bitfld.long 0x00 10.--11. "CKSEL5,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 8.--9. "CKSEL4,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 6.--7. "CKSEL3,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
newline
bitfld.long 0x00 4.--5. "CKSEL2,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 2.--3. "CKSEL1,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
bitfld.long 0x00 0.--1. "CKSEL0,Noise filter sampling clock selector" "0: Divided by 1,1: Divided by 8,2: Divided by 32,3: Divided by 64"
group.long 0x0C++0x03
line.long 0x00 "NS_PORTNF_MD,Interrupt Edge Detection Setting Register"
bitfld.long 0x00 28.--29. "MDDRQ,Select detection mode for DREQ of DMAC" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 26.--27. "MD13,Select detection mode for IRQ13" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 24.--25. "MD12,Select detection mode for IRQ12" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
newline
bitfld.long 0x00 22.--23. "MD11,Select detection mode for IRQ11" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 20.--21. "MD10,Select detection mode for IRQ10" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 18.--19. "MD9,Select detection mode for IRQ9" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
newline
bitfld.long 0x00 16.--17. "MD8,Select detection mode for IRQ8" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 14.--15. "MD7,Select detection mode for IRQ7" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 12.--13. "MD6,Select detection mode for IRQ6" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
newline
bitfld.long 0x00 10.--11. "MD5,Select detection mode for IRQ5" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 8.--9. "MD4,Select detection mode for IRQ4" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 6.--7. "MD3,Select detection mode for IRQ3" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
newline
bitfld.long 0x00 4.--5. "MD2,Select detection mode for IRQ2" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 2.--3. "MD1,Select detection mode for IRQ1" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
bitfld.long 0x00 0.--1. "MD0,Select detection mode for IRQ0" "0: Invert,1: Falling edge,2: Rising edge,3: Falling and rising edges"
tree.end
tree "IIC (I2C Bus Interface)"
repeat 3. (list 0. 1. 2.) (list ad:0x80043000 ad:0x80043400 ad:0x81008000)
tree "IIC$1"
base $2
group.byte 0x00++0x00
line.byte 0x00 "ICCR1,I2C Bus Control Register 1"
bitfld.byte 0x00 7. "ICE,IIC-Bus Interface Enable" "0: Disable (SCLn and SDAn pins in inactive state),1: Enable (SCLn and SDAn pins in active state)"
bitfld.byte 0x00 6. "IICRST,IIC-Bus Interface Internal Reset" "0: Release IIC reset or internal reset,1: Initiate IIC reset or internal reset"
newline
bitfld.byte 0x00 5. "CLO,Extra SCL Clock Cycle Output" "0: Do not output extra SCL clock cycle (default),1: Output extra SCL clock cycle"
bitfld.byte 0x00 4. "SOWP,SCLO/SDAO Write Protect" "0: Write enable SCLO and SDAO bits,1: Write protect SCLO and SDAO bits"
newline
bitfld.byte 0x00 3. "SCLO,SCL Output Control/Monitor" "0: Read: IIC drives SCLn pin low Write: IIC..,1: Read: IIC releases SCLn pin Write: IIC.."
bitfld.byte 0x00 2. "SDAO,SDA Output Control/Monitor" "0: Read: IIC drives SDAn pin low Write: IIC..,1: Read: IIC releases SDAn pin Write: IIC.."
newline
rbitfld.byte 0x00 1. "SCLI,SCL Line Monitor" "0: SCLn line is low,1: SCLn line is high"
rbitfld.byte 0x00 0. "SDAI,SDA Line Monitor" "0: SDAn line is low,1: SDAn line is high"
group.byte 0x01++0x00
line.byte 0x00 "ICCR2,I2C Bus Control Register 2"
rbitfld.byte 0x00 7. "BBSY,Bus Busy Detection Flag" "0: I2C bus released (bus free state),1: I2C bus occupied (bus busy state)"
bitfld.byte 0x00 6. "MST,Master/Slave Mode" "0: Slave mode,1: Master mode"
newline
bitfld.byte 0x00 5. "TRS,Transmit/Receive Mode" "0: Receive mode,1: Transmit mode"
bitfld.byte 0x00 3. "SP,Stop Condition Issuance Request" "0: Do not issue a stop condition request,1: Issue a stop condition request"
newline
bitfld.byte 0x00 2. "RS,Restart Condition Issuance Request" "0: Do not issue a restart condition request,1: Issue a restart condition request"
bitfld.byte 0x00 1. "ST,Start Condition Issuance Request" "0: Do not issue a start condition request,1: Issue a start condition request"
group.byte 0x02++0x00
line.byte 0x00 "ICMR1,I2C Bus Mode Register 1"
bitfld.byte 0x00 7. "MTWP,MST/TRS Write Protect" "0: Write protect MST and TRS bits in ICCR2,1: Write enable MST and TRS bits in ICCR2"
bitfld.byte 0x00 4.--6. "CKS,Internal Reference Clock Select" "0: PCLKL clock,1: PCLKL/2 clock,2: PCLKL/4 clock,3: PCLKL/8 clock,4: PCLKL/16 clock,5: PCLKL/32 clock,6: PCLKL/64 clock,7: PCLKL/128 clock"
newline
bitfld.byte 0x00 3. "BCWP,BC Write Protect" "0: Write enable BC[2:0] bits,1: Write protect BC[2:0] bits"
bitfld.byte 0x00 0.--2. "BC,Bit Counter" "0: 9 bits,1: 2 bits,2: 3 bits,3: 4 bits,4: 5 bits,5: 6 bits,6: 7 bits,7: 8 bits"
group.byte 0x03++0x00
line.byte 0x00 "ICMR2,I2C Bus Mode Register 2"
bitfld.byte 0x00 7. "DLCS,SDA Output Delay Clock Source Select" "0: Select internal reference clock (IIC?) as..,1: Select internal reference clock divided by 2.."
bitfld.byte 0x00 4.--6. "SDDL,SDA Output Delay Counter" "0: No output delay,1: 1 IIC? cycle (When ICMR2.DLCS = 0 (IIC?)) 1..,2: 2 IIC? cycles (When ICMR2.DLCS = 0 (IIC?)) 3..,3: 3 IIC? cycles (When ICMR2.DLCS = 0 (IIC?)) 5..,4: 4 IIC? cycles (When ICMR2.DLCS = 0 (IIC?)) 7..,5: 5 IIC? cycles (When ICMR2.DLCS = 0 (IIC?)) 9..,6: 6 IIC? cycles (When ICMR2.DLCS = 0 (IIC?)) 11..,7: 7 IIC? cycles (When ICMR2.DLCS = 0 (IIC?)) 13.."
newline
bitfld.byte 0x00 2. "TMOH,Timeout H Count Control" "0: Disable count while SCLn line is high,1: Enable count while SCLn line is high"
bitfld.byte 0x00 1. "TMOL,Timeout L Count Control" "0: Disable count while SCLn line is low,1: Enable count while SCLn line is low"
newline
bitfld.byte 0x00 0. "TMOS,Timeout Detection Time Select" "0: Select long mode,1: Select short mode"
group.byte 0x04++0x00
line.byte 0x00 "ICMR3,I2C Bus Mode Register 3"
bitfld.byte 0x00 7. "SMBS,SMBus/IIC-Bus Select" "0: Select I2C bus,1: Select SMBus"
bitfld.byte 0x00 6. "WAIT,WAIT" "0: No wait,1: Wait"
newline
bitfld.byte 0x00 5. "RDRFS,RDRF Flag Set Timing Select" "0: Set the RDRF flag on the rising edge of the..,1: Set the RDRF flag on the rising edge of the.."
bitfld.byte 0x00 4. "ACKWP,ACKBT Write Protect" "0: Write protect ACKBT bit,1: Write enable ACKBT bit"
newline
bitfld.byte 0x00 3. "ACKBT,Transmit Acknowledge" "0: Send 0 as the acknowledge bit (ACK..,1: Send 1 as the acknowledge bit (NACK.."
rbitfld.byte 0x00 2. "ACKBR,Receive Acknowledge" "0: 0 received as the acknowledge bit (ACK..,1: 1 received as the acknowledge bit (NACK.."
newline
bitfld.byte 0x00 0.--1. "NF,Noise Filter Stage Select" "0: Filter out noise of up to 1 IIC? cycle..,1: Filter out noise of up to 2 IIC? cycles..,2: Filter out noise of up to 3 IIC? cycles..,3: Filter out noise of up to 4 IIC? cycles.."
group.byte 0x05++0x00
line.byte 0x00 "ICFER,I2C Bus Function Enable Register"
bitfld.byte 0x00 6. "SCLE,SCL Synchronous Circuit Enable" "0: Do not use the SCL synchronous circuit,1: Use the SCL synchronous circuit"
bitfld.byte 0x00 5. "NFE,Digital Noise Filter Circuit Enable" "0: Do not use the digital noise filter circuit,1: Use the digital noise filter circuit"
newline
bitfld.byte 0x00 4. "NACKE,NACK Reception Transfer Suspension Enable" "0: Do not suspend transfer operation during NACK..,1: Suspend transfer operation during NACK.."
bitfld.byte 0x00 3. "SALE,Slave Arbitration-Lost Detection Enable" "0: Disable,1: Enable"
newline
bitfld.byte 0x00 2. "NALE,NACK Transmission Arbitration-Lost Detection Enable" "0: Disable,1: Enable"
bitfld.byte 0x00 1. "MALE,Master Arbitration-Lost Detection Enable" "0: Disable the arbitration-lost detection..,1: Enable the arbitration-lost detection.."
newline
bitfld.byte 0x00 0. "TMOE,Timeout Function Enable" "0: Disable,1: Enable"
group.byte 0x06++0x00
line.byte 0x00 "ICSER,I2C Bus Status Enable Register"
bitfld.byte 0x00 7. "HOAE,Host Address Enable" "0: Disable host address detection,1: Enable host address detection"
bitfld.byte 0x00 5. "DIDE,Device ID Address Detection Enable" "0: Disable device ID address detection,1: Enable device ID address detection"
newline
bitfld.byte 0x00 3. "GCAE,General Call Address Enable" "0: Disable general call address detection,1: Enable general call address detection"
bitfld.byte 0x00 2. "SAR2E,Slave Address Register 2 Enable" "0: Disable slave address in SARL2 and SARU2,1: Enable slave address in SARL2 and SARU2"
newline
bitfld.byte 0x00 1. "SAR1E,Slave Address Register 1 Enable" "0: Disable slave address in SARL1 and SARU1,1: Enable slave address in SARL1 and SARU1"
bitfld.byte 0x00 0. "SAR0E,Slave Address Register 0 Enable" "0: Disable slave address in SARL0 and SARU0,1: Enable slave address in SARL0 and SARU0"
group.byte 0x07++0x00
line.byte 0x00 "ICIER,I2C Bus Interrupt Enable Register"
bitfld.byte 0x00 7. "TIE,Transmit Data Empty Interrupt Request Enable" "0: Disable transmit data empty interrupt..,1: Enable transmit data empty interrupt.."
bitfld.byte 0x00 6. "TEIE,Transmit End Interrupt Request Enable" "0: Disable transmit end interrupt (IICn_TEI)..,1: Enable transmit end interrupt (IICn_TEI).."
newline
bitfld.byte 0x00 5. "RIE,Receive Data Full Interrupt Request Enable" "0: Disable receive data full interrupt..,1: Enable receive data full interrupt (IICn_RXI).."
bitfld.byte 0x00 4. "NAKIE,NACK Reception Interrupt Request Enable" "0: Disable NACK reception interrupt IICn_EEI..,1: Enable NACK reception interrupt IICn_EEI.."
newline
bitfld.byte 0x00 3. "SPIE,Stop Condition Detection Interrupt Request Enable" "0: Disable stop condition detection interrupt..,1: Enable stop condition detection interrupt.."
bitfld.byte 0x00 2. "STIE,Start Condition Detection Interrupt Request Enable" "0: Disable start condition detection interrupt..,1: Enable start condition detection interrupt.."
newline
bitfld.byte 0x00 1. "ALIE,Arbitration-Lost Interrupt Request Enable" "0: Disable arbitration-lost interrupt IICn_EEI..,1: Enable arbitration-lost interrupt IICn_EEI.."
bitfld.byte 0x00 0. "TMOIE,Timeout Interrupt Request Enable" "0: Disable timeout interrupt IICn_EEI (TMOF)..,1: Enable timeout interrupt IICn_EEI (TMOF).."
group.byte 0x08++0x00
line.byte 0x00 "ICSR1,I2C Bus Status Register 1"
bitfld.byte 0x00 7. "HOA,Host Address Detection Flag" "0: Host address not detected,1: Host address detected"
bitfld.byte 0x00 5. "DID,Device ID Address Detection Flag" "0: Device ID command not detected,1: Device ID command detected"
newline
bitfld.byte 0x00 3. "GCA,General Call Address Detection Flag" "0: General call address not detected,1: General call address detected"
bitfld.byte 0x00 2. "AAS2,Slave Address 2 Detection Flag" "0: Slave address 2 not detected,1: Slave address 2 detected"
newline
bitfld.byte 0x00 1. "AAS1,Slave Address 1 Detection Flag" "0: Slave address 1 not detected,1: Slave address 1 detected"
bitfld.byte 0x00 0. "AAS0,Slave Address 0 Detection Flag" "0: Slave address 0 not detected,1: Slave address 0 detected"
group.byte 0x09++0x00
line.byte 0x00 "ICSR2,I2C Bus Status Register 2"
rbitfld.byte 0x00 7. "TDRE,Transmit Data Empty Flag" "0: ICDRT contains transmit data,1: ICDRT contains no transmit data"
bitfld.byte 0x00 6. "TEND,Transmit End Flag" "0: Data being transmitted,1: Data transmit complete"
newline
bitfld.byte 0x00 5. "RDRF,Receive Data Full Flag" "0: ICDRR contains no receive data,1: ICDRR contains receive data"
bitfld.byte 0x00 4. "NACKF,NACK Detection Flag" "0: NACK not detected,1: NACK detected"
newline
bitfld.byte 0x00 3. "STOP,Stop Condition Detection Flag" "0: Stop condition not detected,1: Stop condition detected"
bitfld.byte 0x00 2. "START,Start Condition Detection Flag" "0: Start condition not detected,1: Start condition detected"
newline
bitfld.byte 0x00 1. "AL,Arbitration-Lost Flag" "0: Arbitration not lost,1: Arbitration lost"
bitfld.byte 0x00 0. "TMOF,Timeout Detection Flag" "0: Timeout not detected,1: Timeout detected"
repeat 3. (strings "0" "1" "2" )(list 0x0 0x2 0x4 )
group.byte ($2+0x0A)++0x00
line.byte 0x00 "SARL$1,Slave Address Register L"
hexmask.byte 0x00 1.--7. 1. "SVA,7-bit Address/10-bit Address Lower Bits"
bitfld.byte 0x00 0. "SVA0,10-bit Address LSB" "0,1"
repeat.end
repeat 3. (strings "0" "1" "2" )(list 0x0 0x2 0x4 )
group.byte ($2+0x0B)++0x00
line.byte 0x00 "SARU$1,Slave Address Register U"
bitfld.byte 0x00 1.--2. "SVA,10-bit Address Upper Bits" "0,1,2,3"
bitfld.byte 0x00 0. "FS,7-bit/10-bit Address Format Select" "0: Select 7-bit address format,1: Select 10-bit address format"
repeat.end
group.byte 0x10++0x00
line.byte 0x00 "ICBRL,I2C Bus Bit Rate Low-Level Register"
bitfld.byte 0x00 0.--4. "BRL,Bit Rate Low-Level Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.byte 0x11++0x00
line.byte 0x00 "ICBRH,I2C Bus Bit Rate High-Level Register"
bitfld.byte 0x00 0.--4. "BRH,Bit Rate High-Level Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.byte 0x12++0x00
line.byte 0x00 "ICDRT,I2C Bus Transmit Data Register"
rgroup.byte 0x13++0x00
line.byte 0x00 "ICDRR,I2C Bus Receive Data Register"
tree.end
repeat.end
tree.end
tree "MBXSEM (Mailbox and Semaphore)"
base ad:0x80240000
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x00)++0x03
line.long 0x00 "SEM$1,Semaphore Register"
bitfld.long 0x00 0. "SEM,Semaphore bit" "0: Resource being used,1: Resource not being used"
repeat.end
group.long 0x20++0x03
line.long 0x00 "SEMRCEN,Semaphore Read Clear Enable Register"
bitfld.long 0x00 7. "SEMRCEN7," "0: Disables read clear function,1: Enables read clear function"
bitfld.long 0x00 6. "SEMRCEN6," "0: Disables read clear function,1: Enables read clear function"
bitfld.long 0x00 5. "SEMRCEN5," "0: Disables read clear function,1: Enables read clear function"
newline
bitfld.long 0x00 4. "SEMRCEN4," "0: Disables read clear function,1: Enables read clear function"
bitfld.long 0x00 3. "SEMRCEN3," "0: Disables read clear function,1: Enables read clear function"
bitfld.long 0x00 2. "SEMRCEN2," "0: Disables read clear function,1: Enables read clear function"
newline
bitfld.long 0x00 1. "SEMRCEN1," "0: Disables read clear function,1: Enables read clear function"
bitfld.long 0x00 0. "SEMRCEN0," "0: Disables read clear function,1: Enables read clear function"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
rgroup.long ($2+0x40)++0x03
line.long 0x00 "MBXH2C$1,Host to CR52 Mailbox Register"
hexmask.long 0x00 0.--31. 1. "MBX,"
repeat.end
rgroup.long 0x50++0x03
line.long 0x00 "MBXISETH2C,Host to CR52 Mailbox Interrupt Set Register"
bitfld.long 0x00 3. "MBX_INT3S,Generates or indicates MBX_INT3 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
bitfld.long 0x00 2. "MBX_INT2S,Generates or indicates MBX_INT2 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
bitfld.long 0x00 1. "MBX_INT1S,Generates or indicates MBX_INT1 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
newline
bitfld.long 0x00 0. "MBX_INT0S,Generates or indicates MBX_INT0 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
group.long 0x54++0x03
line.long 0x00 "MBXICLRH2C,Host to CR52 Mailbox Interrupt Clear Register"
bitfld.long 0x00 3. "MBX_INT3C,Clears or indicates MBX_INT3 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
bitfld.long 0x00 2. "MBX_INT2C,Clears or indicates MBX_INT2 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
bitfld.long 0x00 1. "MBX_INT1C,Clears or indicates MBX_INT1 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
newline
bitfld.long 0x00 0. "MBX_INT0C,Clears or indicates MBX_INT0 interrupt of mailbox from external host CPU to internal Cortex-R52" "0,1"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x4 0x8 0xC )
group.long ($2+0x80)++0x03
line.long 0x00 "MBXC2H$1,CR52 to Host Mailbox Register"
hexmask.long 0x00 0.--31. 1. "MBX,"
repeat.end
group.long 0x90++0x03
line.long 0x00 "MBXISETC2H,CR52 to Host Mailbox Interrupt Set Register"
bitfld.long 0x00 3. "MBX_HINT3S,Generates or indicates MBX_HINT3 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
bitfld.long 0x00 2. "MBX_HINT2S,Generates or indicates MBX_HINT2 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
bitfld.long 0x00 1. "MBX_HINT1S,Generates or indicates MBX_HINT1 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
newline
bitfld.long 0x00 0. "MBX_HINT0S,Generates or indicates MBX_HINT0 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
rgroup.long 0x94++0x03
line.long 0x00 "MBXICLRC2H,CR52 to Host Mailbox Interrupt Clear Register"
bitfld.long 0x00 3. "MBX_HINT3C,Clears or indicates MBX_HINT3 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
bitfld.long 0x00 2. "MBX_HINT2C,Clears or indicates MBX_HINT2 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
bitfld.long 0x00 1. "MBX_HINT1C,Clears or indicates MBX_HINT1 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
newline
bitfld.long 0x00 0. "MBX_HINT0C,Clears or indicates MBX_HINT0 interrupt of mailbox from internal Cortex-R52 to external host CPU" "0,1"
tree.end
tree "MPU (Master MPU)"
repeat 3. (list 0. 1. 2.) (list ad:0x81281100 ad:0x81281200 ad:0x81281300)
tree "MPU$1"
base $2
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x00)++0x03
line.long 0x00 "STADD$1,Master MPU Safety Region Start Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "STADDR,Start address for MPU region"
bitfld.long 0x00 1. "WRPR,Enable write protection for region m of master MPU" "0: Disable write protection,1: Enable write protection"
bitfld.long 0x00 0. "RDPR,Enable read protection for region m of master MPU" "0: Disable read protection,1: Enable read protection"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x04)++0x03
line.long 0x00 "ENDADD$1,Master MPU Safety Region End Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "ENDADDR,End address for MPU region"
repeat.end
group.long 0x80++0x03
line.long 0x00 "ERRINF_R,Master MPU Error Information Register for AXI type"
hexmask.long 0x00 2.--31. 1. "ERRADDR,Access error address"
rbitfld.long 0x00 1. "RW,Access error type" "0: Read access,1: Write access"
bitfld.long 0x00 0. "VALID,Validity of access error information" "0: Error information is invalid,1: Error information is valid"
group.long 0x84++0x03
line.long 0x00 "ERRINF_W,Master MPU Error Information Register for AXI type"
hexmask.long 0x00 2.--31. 1. "ERRADDR,Access error address"
rbitfld.long 0x00 1. "RW,Access error type" "0: Read access,1: Write access"
bitfld.long 0x00 0. "VALID,Validity of access error information" "0: Error information is invalid,1: Error information is valid"
tree.end
repeat.end
repeat 2. (list 3. 4.) (list ad:0x81281400 ad:0x81281500)
tree "MPU$1"
base $2
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x00)++0x03
line.long 0x00 "STADD$1,Master MPU Safety Region Start Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "STADDR,Start address for MPU region"
bitfld.long 0x00 1. "WRPR,Enable write protection for region m of master MPU" "0: Disable write protection,1: Enable write protection"
bitfld.long 0x00 0. "RDPR,Enable read protection for region m of master MPU" "0: Disable read protection,1: Enable read protection"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x04)++0x03
line.long 0x00 "ENDADD$1,Master MPU Safety Region End Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "ENDADDR,End address for MPU region"
repeat.end
group.long 0x80++0x03
line.long 0x00 "ERRINF,Master MPU Error Information Register for AHB type"
hexmask.long 0x00 2.--31. 1. "ERRADDR,Access Error Address"
rbitfld.long 0x00 1. "RW,Access error type" "0: Read access,1: Write access"
bitfld.long 0x00 0. "VALID,Validity of Access Error Information" "0: Error information is invalid,1: Error information is valid"
tree.end
repeat.end
tree "MPU6"
base ad:0x81281700
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x00)++0x03
line.long 0x00 "STADD$1,Master MPU Safety Region Start Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "STADDR,Start address for MPU region"
bitfld.long 0x00 1. "WRPR,Enable write protection for region m of master MPU" "0: Disable write protection,1: Enable write protection"
bitfld.long 0x00 0. "RDPR,Enable read protection for region m of master MPU" "0: Disable read protection,1: Enable read protection"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x04)++0x03
line.long 0x00 "ENDADD$1,Master MPU Safety Region End Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "ENDADDR,End address for MPU region"
repeat.end
group.long 0x80++0x03
line.long 0x00 "ERRINF_R,Master MPU Error Information Register for AXI type"
hexmask.long 0x00 2.--31. 1. "ERRADDR,Access error address"
rbitfld.long 0x00 1. "RW,Access error type" "0: Read access,1: Write access"
bitfld.long 0x00 0. "VALID,Validity of access error information" "0: Error information is invalid,1: Error information is valid"
group.long 0x84++0x03
line.long 0x00 "ERRINF_W,Master MPU Error Information Register for AXI type"
hexmask.long 0x00 2.--31. 1. "ERRADDR,Access error address"
rbitfld.long 0x00 1. "RW,Access error type" "0: Read access,1: Write access"
bitfld.long 0x00 0. "VALID,Validity of access error information" "0: Error information is invalid,1: Error information is valid"
tree.end
repeat 2. (list 7. 8.) (list ad:0x81281C00 ad:0x81281D00)
tree "MPU$1"
base $2
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x00)++0x03
line.long 0x00 "STADD$1,Master MPU Safety Region Start Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "STADDR,Start address for MPU region"
bitfld.long 0x00 1. "WRPR,Enable write protection for region m of master MPU" "0: Disable write protection,1: Enable write protection"
bitfld.long 0x00 0. "RDPR,Enable read protection for region m of master MPU" "0: Disable read protection,1: Enable read protection"
repeat.end
repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x0 0x10 0x20 0x30 0x40 0x50 0x60 0x70 )
group.long ($2+0x04)++0x03
line.long 0x00 "ENDADD$1,Master MPU Safety Region End Address Register"
hexmask.long.tbyte 0x00 10.--31. 1. "ENDADDR,End address for MPU region"
repeat.end
group.long 0x80++0x03
line.long 0x00 "ERRINF,Master MPU Error Information Register for AHB type"
hexmask.long 0x00 2.--31. 1. "ERRADDR,Access Error Address"
rbitfld.long 0x00 1. "RW,Access error type" "0: Read access,1: Write access"
bitfld.long 0x00 0. "VALID,Validity of Access Error Information" "0: Error information is invalid,1: Error information is valid"
tree.end
repeat.end
tree.end
tree "MTU (Memory Test Unit)"
base ad:0x90001000
group.byte 0x20A++0x00
line.byte 0x00 "TOERA,Timer Output Master Enable Register A"
bitfld.byte 0x00 5. "OE4D,Master Enable MTIOC4D" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
bitfld.byte 0x00 4. "OE4C,Master Enable MTIOC4C" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
newline
bitfld.byte 0x00 3. "OE3D,Master Enable MTIOC3D" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
bitfld.byte 0x00 2. "OE4B,Master Enable MTIOC4B" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
newline
bitfld.byte 0x00 1. "OE4A,Master Enable MTIOC4A" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
bitfld.byte 0x00 0. "OE3B,Master Enable MTIOC3B" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
group.byte 0x20D++0x00
line.byte 0x00 "TGCRA,Timer Gate Control Register A"
bitfld.byte 0x00 6. "BDC,Brushless DC Motor" "0: Ordinary output,1: Functions of this register are made effective"
bitfld.byte 0x00 5. "N,Negative-Phase Output (N) Control" "0: Level output,1: Reset-synchronized PWM or complementary PWM.."
newline
bitfld.byte 0x00 4. "P,Positive-Phase Output (P) Control" "0: Level output,1: Reset-synchronized PWM or complementary PWM.."
bitfld.byte 0x00 3. "FB,External Feedback Signal Enable" "0: Output is switched by external input (input..,1: Output is switched by software (UF VF and WF.."
newline
bitfld.byte 0x00 2. "WF,Output Phase Switch" "0,1"
bitfld.byte 0x00 1. "VF,Output Phase Switch" "0,1"
newline
bitfld.byte 0x00 0. "UF,Output Phase Switch" "0,1"
group.byte 0x20E++0x00
line.byte 0x00 "TOCR1A,Timer Output Control Register 1A"
bitfld.byte 0x00 6. "PSYE,PWM Synchronous Output Enable" "0: Toggle output is disabled,1: Toggle output is enabled"
bitfld.byte 0x00 3. "TOCL,TOC Register Write Protection" "0: Write access to the TOCS OLSN and OLSP bits..,1: Write access to the TOCS OLSN and OLSP bits.."
newline
bitfld.byte 0x00 2. "TOCS,TOC Select" "0: TOCR1j setting is selected (j = A B),1: TOCR2j setting is selected (j = A B)"
bitfld.byte 0x00 1. "OLSN,Output Level Select N" "0,1"
newline
bitfld.byte 0x00 0. "OLSP,Output Level Select P" "0,1"
group.byte 0x20F++0x00
line.byte 0x00 "TOCR2A,Timer Output Control Register 2A"
bitfld.byte 0x00 6.--7. "BF,TOLBR Buffer Transfer Timing Select" "0,1,2,3"
bitfld.byte 0x00 5. "OLS3N,Output Level Select 3N" "0,1"
newline
bitfld.byte 0x00 4. "OLS3P,Output Level Select 3P" "0,1"
bitfld.byte 0x00 3. "OLS2N,Output Level Select 2N" "0,1"
newline
bitfld.byte 0x00 2. "OLS2P,Output Level Select 2P" "0,1"
bitfld.byte 0x00 1. "OLS1N,Output Level Select 1N" "0,1"
newline
bitfld.byte 0x00 0. "OLS1P,Output Level Select 1P" "0,1"
group.word 0x214++0x01
line.word 0x00 "TCDRA,Timer Cycle Data Register A"
group.word 0x216++0x01
line.word 0x00 "TDDRA,Timer Dead Time Data Register A"
rgroup.word 0x220++0x01
line.word 0x00 "TCNTSA,Timer Subcounter A"
group.word 0x222++0x01
line.word 0x00 "TCBRA,Timer Cycle Buffer Register A"
group.byte 0x230++0x00
line.byte 0x00 "TITCR1A,Timer Interrupt Skipping Set Register 1A"
bitfld.byte 0x00 7. "T3AEN,TGIA3 Interrupt Skipping Enable" "0: Disabled,1: Enabled"
bitfld.byte 0x00 4.--6. "T3ACOR,TGIA3 Interrupt Skipping Count Setting" "0: Does not skip TGIA3 interrupts,1: Sets the TGIA3 interrupt skipping count to 1,2: Sets the TGIA3 interrupt skipping count to 2,3: Sets the TGIA3 interrupt skipping count to 3,4: Sets the TGIA3 interrupt skipping count to 4,5: Sets the TGIA3 interrupt skipping count to 5,6: Sets the TGIA3 interrupt skipping count to 6,7: Sets the TGIA3 interrupt skipping count to 7"
newline
bitfld.byte 0x00 3. "T4VEN,TCIV4 Interrupt Skipping Enable" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0.--2. "T4VCOR,TCIV4 Interrupt Skipping Count Setting" "0: Does not skip TCIV4 interrupts,1: Sets the TCIV4 interrupt skipping count to 1,2: Sets the TCIV4 interrupt skipping count to 2,3: Sets the TCIV4 interrupt skipping count to 3,4: Sets the TCIV4 interrupt skipping count to 4,5: Sets the TCIV4 interrupt skipping count to 5,6: Sets the TCIV4 interrupt skipping count to 6,7: Sets the TCIV4 interrupt skipping count to 7"
rgroup.byte 0x231++0x00
line.byte 0x00 "TITCNT1A,Timer Interrupt Skipping Counter 1A"
bitfld.byte 0x00 4.--6. "T3ACNT,TGIA3 Interrupt Counter" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 0.--2. "T4VCNT,TCIV4 Interrupt Counter" "0,1,2,3,4,5,6,7"
group.byte 0x232++0x00
line.byte 0x00 "TBTERA,Timer Buffer Transfer Set Register A"
bitfld.byte 0x00 0.--1. "BTE,Buffer Transfer Disable and Interrupt Skipping Link Setting" "0,1,2,3"
group.byte 0x234++0x00
line.byte 0x00 "TDERA,Timer Dead Time Enable Register A"
bitfld.byte 0x00 0. "TDER,Dead Time Enable" "0: No dead time is generated,1: Dead time is generated"
group.byte 0x236++0x00
line.byte 0x00 "TOLBRA,Timer Output Level Buffer Register A"
bitfld.byte 0x00 5. "OLS3N,Output Level Select 3N" "0,1"
bitfld.byte 0x00 4. "OLS3P,Output Level Select 3P" "0,1"
newline
bitfld.byte 0x00 3. "OLS2N,Output Level Select 2N" "0,1"
bitfld.byte 0x00 2. "OLS2P,Output Level Select 2P" "0,1"
newline
bitfld.byte 0x00 1. "OLS1N,Output Level Select 1N" "0,1"
bitfld.byte 0x00 0. "OLS1P,Output Level Select 1P" "0,1"
group.byte 0x23A++0x00
line.byte 0x00 "TITMRA,Timer Interrupt Skipping Mode Register A"
bitfld.byte 0x00 0. "TITM,Interrupt Skipping Function Select" "0: Selects interrupt skipping function 1 Setting..,1: Selects interrupt skipping function 2 Setting.."
group.byte 0x23B++0x00
line.byte 0x00 "TITCR2A,Timer Interrupt Skipping Set Register 2A"
bitfld.byte 0x00 0.--2. "TRG4COR,TRG4AN/TRG4BN Interrupt Skipping Count Setting" "0: Does not skip TRG4AN and TRG4BN interrupts,1: Sets the TRG4AN and TRG4BN interrupt skipping..,2: Sets the TRG4AN and TRG4BN interrupt skipping..,3: Sets the TRG4AN and TRG4BN interrupt skipping..,4: Sets the TRG4AN and TRG4BN interrupt skipping..,5: Sets the TRG4AN and TRG4BN interrupt skipping..,6: Sets the TRG4AN and TRG4BN interrupt skipping..,7: Sets the TRG4AN and TRG4BN interrupt skipping.."
rgroup.byte 0x23C++0x00
line.byte 0x00 "TITCNT2A,Timer Interrupt Skipping Counter 2A"
bitfld.byte 0x00 0.--2. "TRG4CNT,TRG4AN/TRG4BN Interrupt Counter" "0,1,2,3,4,5,6,7"
group.byte 0x260++0x00
line.byte 0x00 "TWCRA,Timer Waveform Control Register A"
bitfld.byte 0x00 7. "CCE,Compare Match Clear Enable" "0: Counters are not cleared at MTU3.TGRA..,1: Counters are cleared at MTU3.TGRA (MTU6.TGRA).."
bitfld.byte 0x00 1. "SCC,Synchronous Clearing Control (Only valid in TWCRB)" "0: Clearing of MTU6.TCNT and MTU7.TCNT in..,1: Clearing of MTU6.TCNT and MTU7.TCNT in.."
newline
bitfld.byte 0x00 0. "WRE,Waveform Retain Enable" "0: Initial values specified in TOCR1A and TOCR2A..,1: Initial output is inhibited"
group.byte 0x270++0x00
line.byte 0x00 "TMDR2A,Timer Mode Register 2A"
bitfld.byte 0x00 0. "DRS,Double Buffer Select" "0: Double buffer function is disabled,1: Double buffer function is enabled"
group.byte 0x280++0x00
line.byte 0x00 "TSTRA,Timer Start Register A"
bitfld.byte 0x00 7. "CST4,Counter Start 4" "0: MTU4.TCNT counting is stopped,1: MTU4.TCNT performs count operation"
bitfld.byte 0x00 6. "CST3,Counter Start 3" "0: MTU3.TCNT counting is stopped,1: MTU3.TCNT performs count operation"
newline
bitfld.byte 0x00 3. "CST8,Counter Start 8" "0: MTU8.TCNT counting is stopped,1: MTU8.TCNT performs count operation"
bitfld.byte 0x00 2. "CST2,Counter Start 2" "0: MTU2.TCNT counting is stopped,1: MTU2.TCNT performs count operation"
newline
bitfld.byte 0x00 1. "CST1,Counter Start 1" "0: MTU1.TCNT counting is stopped,1: MTU1.TCNT performs count operation"
bitfld.byte 0x00 0. "CST0,Counter Start 0" "0: MTU0.TCNT counting is stopped,1: MTU0.TCNT performs count operation"
group.byte 0x281++0x00
line.byte 0x00 "TSYRA,Timer Synchronous Register A"
bitfld.byte 0x00 7. "SYNC4,Timer Synchronous Operation 4" "0: MTU4.TCNT operates independently (TCNT..,1: MTU4.TCNT performs synchronous operation.."
bitfld.byte 0x00 6. "SYNC3,Timer Synchronous Operation 3" "0: MTU3.TCNT operates independently (TCNT..,1: MTU3.TCNT performs synchronous operation.."
newline
bitfld.byte 0x00 2. "SYNC2,Timer Synchronous Operation 2" "0: MTU2.TCNT operates independently (TCNT..,1: MTU2.TCNT performs synchronous operation.."
bitfld.byte 0x00 1. "SYNC1,Timer Synchronous Operation 1" "0: MTU1.TCNT operates independently (TCNT..,1: MTU1.TCNT performs synchronous operation.."
newline
bitfld.byte 0x00 0. "SYNC0,Timer Synchronous Operation 0" "0: MTU0.TCNT operates independently (TCNT..,1: MTU0.TCNT performs synchronous operation.."
group.byte 0x282++0x00
line.byte 0x00 "TCSYSTR,Timer Counter Synchronous Start Register"
bitfld.byte 0x00 7. "SCH0,Synchronous Start 0" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU0.TCNT"
bitfld.byte 0x00 6. "SCH1,Synchronous Start 1" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU1.TCNT"
newline
bitfld.byte 0x00 5. "SCH2,Synchronous Start 2" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU2.TCNT"
bitfld.byte 0x00 4. "SCH3,Synchronous Start 3" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU3.TCNT"
newline
bitfld.byte 0x00 3. "SCH4,Synchronous Start 4" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU4.TCNT"
bitfld.byte 0x00 1. "SCH6,Synchronous Start 6" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU6.TCNT"
newline
bitfld.byte 0x00 0. "SCH7,Synchronous Start 7" "0: Does not specify synchronous start for..,1: Specifies synchronous start for MTU7.TCNT"
group.byte 0x284++0x00
line.byte 0x00 "TRWERA,Timer Read/Write Enable Register"
bitfld.byte 0x00 0. "RWE,Read/Write Enable" "0: Read/write access to the registers is disabled,1: Read/write access to the registers is enabled"
group.byte 0xA0A++0x00
line.byte 0x00 "TOERB,Timer Output Master Enable Register B"
bitfld.byte 0x00 5. "OE7D,Master Enable MTIOC7D" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
bitfld.byte 0x00 4. "OE7C,Master Enable MTIOC7C" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
newline
bitfld.byte 0x00 3. "OE6D,Master Enable MTIOC6D" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
bitfld.byte 0x00 2. "OE7B,Master Enable MTIOC7B" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
newline
bitfld.byte 0x00 1. "OE7A,Master Enable MTIOC7A" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
bitfld.byte 0x00 0. "OE6B,Master Enable MTIOC6B" "0: MTU output is disabled (non-active level),1: MTU output is enabled"
group.byte 0xA0E++0x00
line.byte 0x00 "TOCR1B,Timer Output Control Register 1B"
bitfld.byte 0x00 6. "PSYE,PWM Synchronous Output Enable" "0: Toggle output is disabled,1: Toggle output is enabled"
bitfld.byte 0x00 3. "TOCL,TOC Register Write Protection" "0: Write access to the TOCS OLSN and OLSP bits..,1: Write access to the TOCS OLSN and OLSP bits.."
newline
bitfld.byte 0x00 2. "TOCS,TOC Select" "0: TOCR1j setting is selected (j = A B),1: TOCR2j setting is selected (j = A B)"
bitfld.byte 0x00 1. "OLSN,Output Level Select N" "0,1"
newline
bitfld.byte 0x00 0. "OLSP,Output Level Select P" "0,1"
group.byte 0xA0F++0x00
line.byte 0x00 "TOCR2B,Timer Output Control Register 2B"
bitfld.byte 0x00 6.--7. "BF,TOLBR Buffer Transfer Timing Select" "0,1,2,3"
bitfld.byte 0x00 5. "OLS3N,Output Level Select 3N" "0,1"
newline
bitfld.byte 0x00 4. "OLS3P,Output Level Select 3P" "0,1"
bitfld.byte 0x00 3. "OLS2N,Output Level Select 2N" "0,1"
newline
bitfld.byte 0x00 2. "OLS2P,Output Level Select 2P" "0,1"
bitfld.byte 0x00 1. "OLS1N,Output Level Select 1N" "0,1"
newline
bitfld.byte 0x00 0. "OLS1P,Output Level Select 1P" "0,1"
group.word 0xA14++0x01
line.word 0x00 "TCDRB,Timer Cycle Data Register B"
group.word 0xA16++0x01
line.word 0x00 "TDDRB,Timer Dead Time Data Register B"
rgroup.word 0xA20++0x01
line.word 0x00 "TCNTSB,Timer Subcounter B"
group.word 0xA22++0x01
line.word 0x00 "TCBRB,Timer Cycle Buffer Register B"
group.byte 0xA30++0x00
line.byte 0x00 "TITCR1B,Timer Interrupt Skipping Set Register 1B"
bitfld.byte 0x00 7. "T6AEN,TGIA6 Interrupt Skipping Enable" "0: Disabled,1: Enabled"
bitfld.byte 0x00 4.--6. "T6ACOR,TGIA6 Interrupt Skipping Count Setting" "0: Does not skip TGIA6 interrupts,1: Sets the TGIA6 interrupt skipping count to 1,2: Sets the TGIA6 interrupt skipping count to 2,3: Sets the TGIA6 interrupt skipping count to 3,4: Sets the TGIA6 interrupt skipping count to 4,5: Sets the TGIA6 interrupt skipping count to 5,6: Sets the TGIA6 interrupt skipping count to 6,7: Sets the TGIA6 interrupt skipping count to 7"
newline
bitfld.byte 0x00 3. "T7VEN,TCIV7 Interrupt Skipping Enable" "0: Disabled,1: Enabled"
bitfld.byte 0x00 0.--2. "T7VCOR,TCIV7 Interrupt Skipping Count Setting" "0: Does not skip TCIV7 interrupts,1: Sets the TCIV7 interrupt skipping count to 1,2: Sets the TCIV7 interrupt skipping count to 2,3: Sets the TCIV7 interrupt skipping count to 3,4: Sets the TCIV7 interrupt skipping count to 4,5: Sets the TCIV7 interrupt skipping count to 5,6: Sets the TCIV7 interrupt skipping count to 6,7: Sets the TCIV7 interrupt skipping count to 7"
rgroup.byte 0xA31++0x00
line.byte 0x00 "TITCNT1B,Timer Interrupt Skipping Counter 1B"
bitfld.byte 0x00 4.--6. "T6ACNT,TGIA6 Interrupt Counter" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 0.--2. "T7VCNT,TCIV7 Interrupt Counter" "0,1,2,3,4,5,6,7"
group.byte 0xA32++0x00
line.byte 0x00 "TBTERB,Timer Buffer Transfer Set Register B"
bitfld.byte 0x00 0.--1. "BTE,Buffer Transfer Disable and Interrupt Skipping Link Setting" "0,1,2,3"
group.byte 0xA34++0x00
line.byte 0x00 "TDERB,Timer Dead Time Enable Register B"
bitfld.byte 0x00 0. "TDER,Dead Time Enable" "0: No dead time is generated,1: Dead time is generated"
group.byte 0xA36++0x00
line.byte 0x00 "TOLBRB,Timer Output Level Buffer Register B"
bitfld.byte 0x00 5. "OLS3N,Output Level Select 3N" "0,1"
bitfld.byte 0x00 4. "OLS3P,Output Level Select 3P" "0,1"
newline
bitfld.byte 0x00 3. "OLS2N,Output Level Select 2N" "0,1"
bitfld.byte 0x00 2. "OLS2P,Output Level Select 2P" "0,1"
newline
bitfld.byte 0x00 1. "OLS1N,Output Level Select 1N" "0,1"
bitfld.byte 0x00 0. "OLS1P,Output Level Select 1P" "0,1"
group.byte 0xA3A++0x00
line.byte 0x00 "TITMRB,Timer Interrupt Skipping Mode Register B"
bitfld.byte 0x00 0. "TITM,Interrupt Skipping Function Select" "0: Selects interrupt skipping function 1 Setting..,1: Selects interrupt skipping function 2 Setting.."
group.byte 0xA3B++0x00
line.byte 0x00 "TITCR2B,Timer Interrupt Skipping Set Register 2B"
bitfld.byte 0x00 0.--2. "TRG7COR,TRG7AN/TRG7BN Interrupt Skipping Count Setting" "0: Does not skip TRG7AN and TRG7BN interrupts,1: Sets the TRG7AN and TRG7BN interrupt skipping..,2: Sets the TRG7AN and TRG7BN interrupt skipping..,3: Sets the TRG7AN and TRG7BN interrupt skipping..,4: Sets the TRG7AN and TRG7BN interrupt skipping..,5: Sets the TRG7AN and TRG7BN interrupt skipping..,6: Sets the TRG7AN and TRG7BN interrupt skipping..,7: Sets the TRG7AN and TRG7BN interrupt skipping.."
rgroup.byte 0xA3C++0x00
line.byte 0x00 "TITCNT2B,Timer Interrupt Skipping Counter 2B"
bitfld.byte 0x00 0.--2. "TRG7CNT,TRG7AN/TRG7BN Interrupt Counter" "0,1,2,3,4,5,6,7"
group.byte 0xA60++0x00
line.byte 0x00 "TWCRB,Timer Waveform Control Register B"
bitfld.byte 0x00 7. "CCE,Compare Match Clear Enable" "0: Counters are not cleared at MTU3.TGRA..,1: Counters are cleared at MTU3.TGRA (MTU6.TGRA).."
bitfld.byte 0x00 1. "SCC,Synchronous Clearing Control (Only valid in TWCRB)" "0: Clearing of MTU6.TCNT and MTU7.TCNT in..,1: Clearing of MTU6.TCNT and MTU7.TCNT in.."
newline
bitfld.byte 0x00 0. "WRE,Waveform Retain Enable" "0: Initial values specified in TOCR1A and TOCR2A..,1: Initial output is inhibited"
group.byte 0xA70++0x00
line.byte 0x00 "TMDR2B,Timer Mode Register 2B"
bitfld.byte 0x00 0. "DRS,Double Buffer Select" "0: Double buffer function is disabled,1: Double buffer function is enabled"
group.byte 0xA80++0x00
line.byte 0x00 "TSTRB,Timer Start Register B"
bitfld.byte 0x00 7. "CST7,Counter Start 7" "0: MTU7.TCNT counting is stopped,1: MTU7.TCNT performs count operation"
bitfld.byte 0x00 6. "CST6,Counter Start 6" "0: MTU6.TCNT counting is stopped,1: MTU6.TCNT performs count operation"
group.byte 0xA81++0x00
line.byte 0x00 "TSYRB,Timer Synchronous Register B"
bitfld.byte 0x00 7. "SYNC7,Timer Synchronous Operation 7" "0: MTU7.TCNT operates independently (TCNT..,1: MTU7.TCNT performs synchronous operation.."
bitfld.byte 0x00 6. "SYNC6,Timer Synchronous Operation 6" "0: MTU6.TCNT operates independently (TCNT..,1: MTU6.TCNT performs synchronous operation.."
group.byte 0xA84++0x00
line.byte 0x00 "TRWERB,Timer Read/Write Enable Register"
bitfld.byte 0x00 0. "RWE,Read/Write Enable" "0: Read/write access to the registers is disabled,1: Read/write access to the registers is enabled"
tree.end
tree "MTU_NF (Multi-Function Timer Pulse Unit Noise Filter)"
base ad:0x90001290
group.byte 0x00++0x00
line.byte 0x00 "NFCR0,Noise Filter Control Register 0"
bitfld.byte 0x00 4.--5. "NFCS,Noise Filter Clock Select" "0: PCLKH/1,1: PCLKH/8,2: PCLKH/32,3: Clock source for counting"
bitfld.byte 0x00 3. "NFDEN,Noise Filter D Enable" "0: The noise filter for the MTIOCnD pin is..,1: The noise filter for the MTIOCnD pin is enabled"
newline
bitfld.byte 0x00 2. "NFCEN,Noise Filter C Enable" "0: The noise filter for the MTIOCnC pin is..,1: The noise filter for the MTIOCnC pin is enabled"
bitfld.byte 0x00 1. "NFBEN,Noise Filter B Enable" "0: The noise filter for the MTIOCnB pin is..,1: The noise filter for the MTIOCnB pin is enabled"
newline
bitfld.byte 0x00 0. "NFAEN,Noise Filter A Enable" "0: The noise filter for the MTIOCnA pin is..,1: The noise filter for the MTIOCnA pin is enabled"
repeat 2. (strings "1" "2" )(list 0x0 0x1 )
group.byte ($2+0x01)++0x00
line.byte 0x00 "NFCR$1,Noise Filter Control Register $1"
bitfld.byte 0x00 4.--5. "NFCS,Noise Filter Clock Select" "0: PCLKH/1,1: PCLKH/8,2: PCLKH/32,3: Clock source for counting"
bitfld.byte 0x00 1. "NFBEN,Noise Filter B Enable" "0: The noise filter for the MTIOCmB pin is..,1: The noise filter for the MTIOCmB pin is enabled"
newline
bitfld.byte 0x00 0. "NFAEN,Noise Filter A Enable" "0: The noise filter for the MTIOCmA pin is..,1: The noise filter for the MTIOCmA pin is enabled"
repeat.end
repeat 3. (strings "3" "4" "8" )(list 0x0 0x1 0x5 )
group.byte ($2+0x03)++0x00
line.byte 0x00 "NFCR$1,Noise Filter Control Register $1"
bitfld.byte 0x00 4.--5. "NFCS,Noise Filter Clock Select" "0: PCLKH/1,1: PCLKH/8,2: PCLKH/32,3: Clock source for counting"
bitfld.byte 0x00 3. "NFDEN,Noise Filter D Enable" "0: The noise filter for the MTIOCnD pin is..,1: The noise filter for the MTIOCnD pin is enabled"
newline
bitfld.byte 0x00 2. "NFCEN,Noise Filter C Enable" "0: The noise filter for the MTIOCnC pin is..,1: The noise filter for the MTIOCnC pin is enabled"
bitfld.byte 0x00 1. "NFBEN,Noise Filter B Enable" "0: The noise filter for the MTIOCnB pin is..,1: The noise filter for the MTIOCnB pin is enabled"
newline
bitfld.byte 0x00 0. "NFAEN,Noise Filter A Enable" "0: The noise filter for the MTIOCnA pin is..,1: The noise filter for the MTIOCnA pin is enabled"
repeat.end
group.byte 0x09++0x00
line.byte 0x00 "NFCRC,Noise Filter Control Register C"
bitfld.byte 0x00 4.--5. "NFCS,Noise Filter Clock Select" "0: PCLKH/1,1: PCLKH/2,2: PCLKH/8,3: PCLKH/32"
bitfld.byte 0x00 3. "NFDEN,Noise Filter D Enable" "0: The noise filter for the MTCLKD pin is disabled,1: The noise filter for the MTCLKD pin is enabled"
newline
bitfld.byte 0x00 2. "NFCEN,Noise Filter C Enable" "0: The noise filter for the MTCLKC pin is disabled,1: The noise filter for the MTCLKC pin is enabled"
bitfld.byte 0x00 1. "NFBEN,Noise Filter B Enable" "0: The noise filter for the MTCLKB pin is disabled,1: The noise filter for the MTCLKB pin is enabled"
newline
bitfld.byte 0x00 0. "NFAEN,Noise Filter A Enable" "0: The noise filter for the MTCLKA pin is disabled,1: The noise filter for the MTCLKA pin is enabled"
repeat 2. (strings "6" "7" )(list 0x00 0x01 )
group.byte ($2+0x803)++0x00
line.byte 0x00 "NFCR$1,Noise Filter Control Register $1"
bitfld.byte 0x00 4.--5. "NFCS,Noise Filter Clock Select" "0: PCLKH/1,1: PCLKH/8,2: PCLKH/32,3: Clock source for counting"
bitfld.byte 0x00 3. "NFDEN,Noise Filter D Enable" "0: The noise filter for the MTIOCnD pin is..,1: The noise filter for the MTIOCnD pin is enabled"
newline
bitfld.byte 0x00 2. "NFCEN,Noise Filter C Enable" "0: The noise filter for the MTIOCnC pin is..,1: The noise filter for the MTIOCnC pin is enabled"
bitfld.byte 0x00 1. "NFBEN,Noise Filter B Enable" "0: The noise filter for the MTIOCnB pin is..,1: The noise filter for the MTIOCnB pin is enabled"
newline
bitfld.byte 0x00 0. "NFAEN,Noise Filter A Enable" "0: The noise filter for the MTIOCnA pin is..,1: The noise filter for the MTIOCnA pin is enabled"
repeat.end
group.byte 0x805++0x00
line.byte 0x00 "NFCR5,Noise Filter Control Register 5"
bitfld.byte 0x00 4.--5. "NFCS,Noise Filter Clock Select" "0: PCLKH/1,1: PCLKH/8,2: PCLKH/32,3: Clock source for counting"
bitfld.byte 0x00 2. "NFWEN,Noise Filter W Enable" "0: The noise filter for the MTIC5W pin is disabled,1: The noise filter for the MTIC5W pin is enabled"
newline
bitfld.byte 0x00 1. "NFVEN,Noise Filter V Enable" "0: The noise filter for the MTIC5V pin is disabled,1: The noise filter for the MTIC5V pin is enabled"
bitfld.byte 0x00 0. "NFUEN,Noise Filter U Enable" "0: The noise filter for the MTIC5U pin is disabled,1: The noise filter for the MTIC5U pin is enabled"
tree.end
tree "MTU (Memory Test Unit)"
tree "MTU0"
base ad:0x90001300
group.byte 0x00++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x01++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 6. "BFE,Buffer Operation E" "0: MTU0.TGRE and MTU0.TGRF operate normally,1: MTU0.TGRE and MTU0.TGRF used together for.."
bitfld.byte 0x00 5. "BFB,Buffer Operation B" "0: TGRB and TGRD operate normally,1: TGRB and TGRD used together for buffer.."
newline
bitfld.byte 0x00 4. "BFA,Buffer Operation A" "0: TGRA and TGRC operate normally,1: TGRA and TGRC used together for buffer.."
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x02++0x00
line.byte 0x00 "TIORH,Timer I/O Control Register H"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x03++0x00
line.byte 0x00 "TIORL,Timer I/O Control Register L"
bitfld.byte 0x00 4.--7. "IOD,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOC,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x04++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
newline
bitfld.byte 0x00 3. "TGIED,TGR Interrupt Enable D" "0: Interrupt requests (TGID) disabled,1: Interrupt requests (TGID) enabled"
bitfld.byte 0x00 2. "TGIEC,TGR Interrupt Enable C" "0: Interrupt requests (TGIC) disabled,1: Interrupt requests (TGIC) enabled"
newline
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.word 0x06++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x08++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x0A++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.word 0x0C++0x01
line.word 0x00 "TGRC,Timer General Register C"
group.word 0x0E++0x01
line.word 0x00 "TGRD,Timer General Register D"
group.word 0x20++0x01
line.word 0x00 "TGRE,Timer General Register E"
group.word 0x22++0x01
line.word 0x00 "TGRF,Timer General Register F"
group.byte 0x24++0x00
line.byte 0x00 "TIER2,Timer Interrupt Enable Register 2"
bitfld.byte 0x00 7. "TTGE2,A/D Converter Start Request Enable 2" "0: A/D converter start request generation by..,1: A/D converter start request generation by.."
bitfld.byte 0x00 1. "TGIEF,TGR Interrupt Enable F" "0: Interrupt requests (TGIF) disabled,1: Interrupt requests (TGIF) enabled"
newline
bitfld.byte 0x00 0. "TGIEE,TGR Interrupt Enable E" "0: Interrupt requests (TGIE) disabled,1: Interrupt requests (TGIE) enabled"
group.byte 0x26++0x00
line.byte 0x00 "TBTM,Timer Buffer Operation Transfer Mode Register"
bitfld.byte 0x00 2. "TTSE,Timing Select E" "0: When compare match E occurs in MTU0 data is..,1: When MTU0.TCNT is cleared in MTU0 data is.."
bitfld.byte 0x00 1. "TTSB,Timing Select B" "0: When compare match B occurs in each channel..,1: When TCNT is cleared in each channel data is.."
newline
bitfld.byte 0x00 0. "TTSA,Timing Select A" "0: When compare match A occurs in each channel..,1: When TCNT is cleared in each channel data is.."
group.byte 0x28++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
tree.end
tree "MTU1"
base ad:0x90001380
group.byte 0x00++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x01++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x02++0x00
line.byte 0x00 "TIOR,Timer I/O Control Register"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x04++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 5. "TCIEU,Underflow Interrupt Enable" "0: Interrupt requests (TCIU) disabled,1: Interrupt requests (TCIU) enabled"
newline
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
newline
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.byte 0x05++0x00
line.byte 0x00 "TSR,Timer Status Register"
rbitfld.byte 0x00 7. "TCFD,Count Direction Flag" "0: TCNT counts down,1: TCNT counts up"
bitfld.byte 0x00 5. "TCFU,Underflow flag" "0: TCNT underflow has not occurred when MTU1 and..,1: TCNT underflow has occurred when MTU1 and.."
newline
bitfld.byte 0x00 4. "TCFV,Overflow flag" "0: TCNT overflow has not occurred,1: TCNT overflow has occurred"
bitfld.byte 0x00 3. "TGFD,Input Capture/Output Compare Flag D" "0: TGRD input capture or compare match has not..,1: TGRD input capture or compare match has.."
newline
bitfld.byte 0x00 2. "TGFC,Input Capture/Output Compare Flag C" "0: TGRC input capture or compare match has not..,1: TGRC input capture or compare match has.."
bitfld.byte 0x00 1. "TGFB,Input Capture/Output Compare Flag B" "0: TGRB input capture or compare match has not..,1: TGRB input capture or compare match has.."
newline
bitfld.byte 0x00 0. "TGFA,Input Capture/Output Compare Flag A" "0: TGRA input capture or compare match has not..,1: TGRA input capture or compare match has.."
group.word 0x06++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x08++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x0A++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.byte 0x10++0x00
line.byte 0x00 "TICCR,Timer Input Capture Control Register"
bitfld.byte 0x00 3. "I2BE,Input Capture Enable" "0: Does not include the MTIOC2B pin in the..,1: Includes the MTIOC2B pin in the MTU1.TGRB.."
bitfld.byte 0x00 2. "I2AE,Input Capture Enable" "0: Does not include the MTIOC2A pin in the..,1: Includes the MTIOC2A pin in the MTU1.TGRA.."
newline
bitfld.byte 0x00 1. "I1BE,Input Capture Enable" "0: Does not include the MTIOC1B pin in the..,1: Includes the MTIOC1B pin in the MTU2.TGRB.."
bitfld.byte 0x00 0. "I1AE,Input Capture Enable" "0: Does not include the MTIOC1A pin in the..,1: Includes the MTIOC1A pin in the MTU2.TGRA.."
group.byte 0x11++0x00
line.byte 0x00 "TMDR3,Timer Mode Register 3"
bitfld.byte 0x00 1. "PHCKSEL,External Input Phase Clock Select" "0: MTCLKA and MTCLKB are selected for the..,1: MTCLKC and MTCLKD are selected for the.."
bitfld.byte 0x00 0. "LWA,MTU1/MTU2 Combination Longword Access Control" "0: 16-bit access is enabled,1: 32-bit access is enabled"
group.byte 0x14++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 3.--4. "PCB,Functional Expansion Control for Phase Counting Modes 2 3 and 5" "0,1,2,3"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.long 0x20++0x03
line.long 0x00 "TCNTLW,Timer Longword Counter"
group.long 0x24++0x03
line.long 0x00 "TGRALW,Timer Longword General Register A"
group.long 0x24++0x03
line.long 0x00 "TGRBLW,Timer Longword General Register B"
tree.end
tree "MTU2"
base ad:0x90001400
group.byte 0x00++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x01++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x02++0x00
line.byte 0x00 "TIOR,Timer I/O Control Register"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x04++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 5. "TCIEU,Underflow Interrupt Enable" "0: Interrupt requests (TCIU) disabled,1: Interrupt requests (TCIU) enabled"
newline
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
newline
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.byte 0x05++0x00
line.byte 0x00 "TSR,Timer Status Register"
rbitfld.byte 0x00 7. "TCFD,Count Direction Flag" "0: TCNT counts down,1: TCNT counts up"
bitfld.byte 0x00 5. "TCFU,Underflow flag" "0: TCNT underflow has not occurred when MTU1 and..,1: TCNT underflow has occurred when MTU1 and.."
newline
bitfld.byte 0x00 4. "TCFV,Overflow flag" "0: TCNT overflow has not occurred,1: TCNT overflow has occurred"
bitfld.byte 0x00 3. "TGFD,Input Capture/Output Compare Flag D" "0: TGRD input capture or compare match has not..,1: TGRD input capture or compare match has.."
newline
bitfld.byte 0x00 2. "TGFC,Input Capture/Output Compare Flag C" "0: TGRC input capture or compare match has not..,1: TGRC input capture or compare match has.."
bitfld.byte 0x00 1. "TGFB,Input Capture/Output Compare Flag B" "0: TGRB input capture or compare match has not..,1: TGRB input capture or compare match has.."
newline
bitfld.byte 0x00 0. "TGFA,Input Capture/Output Compare Flag A" "0: TGRA input capture or compare match has not..,1: TGRA input capture or compare match has.."
group.word 0x06++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x08++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x0A++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.byte 0x0C++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 3.--4. "PCB,Functional Expansion Control for Phase Counting Modes 2 3 and 5" "0,1,2,3"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
tree.end
tree "MTU3"
base ad:0x90001100
group.byte 0x100++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x102++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 5. "BFB,Buffer Operation B" "0: TGRB and TGRD operate normally,1: TGRB and TGRD used together for buffer.."
bitfld.byte 0x00 4. "BFA,Buffer Operation A" "0: TGRA and TGRC operate normally,1: TGRA and TGRC used together for buffer.."
newline
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x104++0x00
line.byte 0x00 "TIORH,Timer I/O Control Register H"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x105++0x00
line.byte 0x00 "TIORL,Timer I/O Control Register L"
bitfld.byte 0x00 4.--7. "IOD,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOC,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x108++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
newline
bitfld.byte 0x00 3. "TGIED,TGR Interrupt Enable D" "0: Interrupt requests (TGID) disabled,1: Interrupt requests (TGID) enabled"
bitfld.byte 0x00 2. "TGIEC,TGR Interrupt Enable C" "0: Interrupt requests (TGIC) disabled,1: Interrupt requests (TGIC) enabled"
newline
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.word 0x110++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x118++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x11A++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.word 0x124++0x01
line.word 0x00 "TGRC,Timer General Register C"
group.word 0x126++0x01
line.word 0x00 "TGRD,Timer General Register D"
group.byte 0x12C++0x00
line.byte 0x00 "TSR,Timer Status Register"
rbitfld.byte 0x00 7. "TCFD,Count Direction Flag" "0: TCNT counts down,1: TCNT counts up"
bitfld.byte 0x00 5. "TCFU,Underflow flag" "0: TCNT underflow has not occurred when MTU1 and..,1: TCNT underflow has occurred when MTU1 and.."
newline
bitfld.byte 0x00 4. "TCFV,Overflow flag" "0: TCNT overflow has not occurred,1: TCNT overflow has occurred"
bitfld.byte 0x00 3. "TGFD,Input Capture/Output Compare Flag D" "0: TGRD input capture or compare match has not..,1: TGRD input capture or compare match has.."
newline
bitfld.byte 0x00 2. "TGFC,Input Capture/Output Compare Flag C" "0: TGRC input capture or compare match has not..,1: TGRC input capture or compare match has.."
bitfld.byte 0x00 1. "TGFB,Input Capture/Output Compare Flag B" "0: TGRB input capture or compare match has not..,1: TGRB input capture or compare match has.."
newline
bitfld.byte 0x00 0. "TGFA,Input Capture/Output Compare Flag A" "0: TGRA input capture or compare match has not..,1: TGRA input capture or compare match has.."
group.byte 0x138++0x00
line.byte 0x00 "TBTM,Timer Buffer Operation Transfer Mode Register"
bitfld.byte 0x00 1. "TTSB,Timing Select B" "0: When compare match B occurs in each channel..,1: When TCNT is cleared in each channel data is.."
bitfld.byte 0x00 0. "TTSA,Timing Select A" "0: When compare match A occurs in each channel..,1: When TCNT is cleared in each channel data is.."
group.byte 0x14C++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.word 0x172++0x01
line.word 0x00 "TGRE,Timer General Register E"
tree.end
tree "MTU4"
base ad:0x90001200
group.byte 0x01++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x03++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 5. "BFB,Buffer Operation B" "0: TGRB and TGRD operate normally,1: TGRB and TGRD used together for buffer.."
bitfld.byte 0x00 4. "BFA,Buffer Operation A" "0: TGRA and TGRC operate normally,1: TGRA and TGRC used together for buffer.."
newline
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x06++0x00
line.byte 0x00 "TIORH,Timer I/O Control Register H"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x07++0x00
line.byte 0x00 "TIORL,Timer I/O Control Register L"
bitfld.byte 0x00 4.--7. "IOD,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOC,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x09++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 6. "TTGE2,A/D Converter Start Request Enable 2" "0: A/D converter start request generation by..,1: A/D converter start request generation by.."
newline
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
bitfld.byte 0x00 3. "TGIED,TGR Interrupt Enable D" "0: Interrupt requests (TGID) disabled,1: Interrupt requests (TGID) enabled"
newline
bitfld.byte 0x00 2. "TGIEC,TGR Interrupt Enable C" "0: Interrupt requests (TGIC) disabled,1: Interrupt requests (TGIC) enabled"
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
newline
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.word 0x12++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x1C++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x1E++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.word 0x28++0x01
line.word 0x00 "TGRC,Timer General Register C"
group.word 0x2A++0x01
line.word 0x00 "TGRD,Timer General Register D"
group.byte 0x2D++0x00
line.byte 0x00 "TSR,Timer Status Register"
rbitfld.byte 0x00 7. "TCFD,Count Direction Flag" "0: TCNT counts down,1: TCNT counts up"
bitfld.byte 0x00 5. "TCFU,Underflow flag" "0: TCNT underflow has not occurred when MTU1 and..,1: TCNT underflow has occurred when MTU1 and.."
newline
bitfld.byte 0x00 4. "TCFV,Overflow flag" "0: TCNT overflow has not occurred,1: TCNT overflow has occurred"
bitfld.byte 0x00 3. "TGFD,Input Capture/Output Compare Flag D" "0: TGRD input capture or compare match has not..,1: TGRD input capture or compare match has.."
newline
bitfld.byte 0x00 2. "TGFC,Input Capture/Output Compare Flag C" "0: TGRC input capture or compare match has not..,1: TGRC input capture or compare match has.."
bitfld.byte 0x00 1. "TGFB,Input Capture/Output Compare Flag B" "0: TGRB input capture or compare match has not..,1: TGRB input capture or compare match has.."
newline
bitfld.byte 0x00 0. "TGFA,Input Capture/Output Compare Flag A" "0: TGRA input capture or compare match has not..,1: TGRA input capture or compare match has.."
group.byte 0x39++0x00
line.byte 0x00 "TBTM,Timer Buffer Operation Transfer Mode Register"
bitfld.byte 0x00 1. "TTSB,Timing Select B" "0: When compare match B occurs in each channel..,1: When TCNT is cleared in each channel data is.."
bitfld.byte 0x00 0. "TTSA,Timing Select A" "0: When compare match A occurs in each channel..,1: When TCNT is cleared in each channel data is.."
group.word 0x40++0x01
line.word 0x00 "TADCR,Timer A/D Converter Start Request Control Register"
bitfld.word 0x00 14.--15. "BF,MTU4.TADCOBRA/TADCOBRB Transfer Timing Select" "0,1,2,3"
bitfld.word 0x00 7. "UT4AE,Up-Count TRG4AN Enable" "0: A/D converter start requests (TRG4AN)..,1: A/D converter start requests (TRG4AN) enabled.."
newline
bitfld.word 0x00 6. "DT4AE,Down-Count TRG4AN Enable" "0: A/D converter start requests (TRG4AN)..,1: A/D converter start requests (TRG4AN) enabled.."
bitfld.word 0x00 5. "UT4BE,Up-Count TRG4BN Enable" "0: A/D converter start requests (TRG4BN)..,1: A/D converter start requests (TRG4BN) enabled.."
newline
bitfld.word 0x00 4. "DT4BE,Down-Count TRG4BN Enable" "0: A/D converter start requests (TRG4BN)..,1: A/D converter start requests (TRG4BN) enabled.."
bitfld.word 0x00 3. "ITA3AE,TGIA3 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG4AN and..,1: A/D converter start request signal TRG4AN and.."
newline
bitfld.word 0x00 2. "ITA4VE,TCIV4 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG4AN and..,1: A/D converter start request signal TRG4AN and.."
bitfld.word 0x00 1. "ITB3AE,TGIA3 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG4BN and..,1: A/D converter start request signal TRG4BN and.."
newline
bitfld.word 0x00 0. "ITB4VE,TCIV4 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG4BN and..,1: A/D converter start request signal TRG4BN and.."
group.word 0x44++0x01
line.word 0x00 "TADCORA,Timer A/D Converter Start Request Cycle Set Register A"
group.word 0x46++0x01
line.word 0x00 "TADCORB,Timer A/D Converter Start Request Cycle Set Register B"
group.word 0x48++0x01
line.word 0x00 "TADCOBRA,Timer A/D Converter Start Request Cycle Set Buffer Register A"
group.word 0x4A++0x01
line.word 0x00 "TADCOBRB,Timer A/D Converter Start Request Cycle Set Buffer Register B"
group.byte 0x4D++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.word 0x74++0x01
line.word 0x00 "TGRE,Timer General Register E"
group.word 0x76++0x01
line.word 0x00 "TGRF,Timer General Register F"
tree.end
tree "MTU5"
base ad:0x90001C00
group.word 0x80++0x01
line.word 0x00 "TCNTU,Timer Counter U"
group.word 0x82++0x01
line.word 0x00 "TGRU,Timer General Register U"
group.byte 0x84++0x00
line.byte 0x00 "TCRU,Timer Control Register U"
bitfld.byte 0x00 0.--1. "TPSC,Time Prescaler Select" "0,1,2,3"
group.byte 0x85++0x00
line.byte 0x00 "TCR2U,Timer Control Register 2U"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Counts at the rising edge,1: Counts at the falling edge,2: Counts at both edges,3: Counts at both edges"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x86++0x00
line.byte 0x00 "TIORU,Timer I/O Control Register U"
bitfld.byte 0x00 0.--4. "IOC,I/O Control C" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.word 0x90++0x01
line.word 0x00 "TCNTV,Timer Counter V"
group.word 0x92++0x01
line.word 0x00 "TGRV,Timer General Register V"
group.byte 0x94++0x00
line.byte 0x00 "TCRV,Timer Control Register V"
bitfld.byte 0x00 0.--1. "TPSC,Time Prescaler Select" "0,1,2,3"
group.byte 0x95++0x00
line.byte 0x00 "TCR2V,Timer Control Register 2V"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Counts at the rising edge,1: Counts at the falling edge,2: Counts at both edges,3: Counts at both edges"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x96++0x00
line.byte 0x00 "TIORV,Timer I/O Control Register V"
bitfld.byte 0x00 0.--4. "IOC,I/O Control C" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.word 0xA0++0x01
line.word 0x00 "TCNTW,Timer Counter W"
group.word 0xA2++0x01
line.word 0x00 "TGRW,Timer General Register W"
group.byte 0xA4++0x00
line.byte 0x00 "TCRW,Timer Control Register W"
bitfld.byte 0x00 0.--1. "TPSC,Time Prescaler Select" "0,1,2,3"
group.byte 0xA5++0x00
line.byte 0x00 "TCR2W,Timer Control Register 2W"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Counts at the rising edge,1: Counts at the falling edge,2: Counts at both edges,3: Counts at both edges"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0xA6++0x00
line.byte 0x00 "TIORW,Timer I/O Control Register W"
bitfld.byte 0x00 0.--4. "IOC,I/O Control C" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.byte 0xB2++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 2. "TGIE5U,TGR Interrupt Enable 5U" "0: Interrupt requests TGIU5 disabled,1: Interrupt requests TGIU5 enabled"
bitfld.byte 0x00 1. "TGIE5V,TGR Interrupt Enable 5V" "0: Interrupt requests TGIV5 disabled,1: Interrupt requests TGIV5 enabled"
newline
bitfld.byte 0x00 0. "TGIE5W,TGR Interrupt Enable 5W" "0: Interrupt requests TGIW5 disabled,1: Interrupt requests TGIW5 enabled"
group.byte 0xB4++0x00
line.byte 0x00 "TSTR,Timer Start Register"
bitfld.byte 0x00 2. "CSTU5,Counter Start U5" "0: MTU5.TCNTU counting is stopped,1: MTU5.TCNTU performs count operation"
bitfld.byte 0x00 1. "CSTV5,Counter Start V5" "0: MTU5.TCNTV counting is stopped,1: MTU5.TCNTV performs count operation"
newline
bitfld.byte 0x00 0. "CSTW5,Counter Start W5" "0: MTU5.TCNTW counting is stopped,1: MTU5.TCNTW performs count operation"
group.byte 0xB6++0x00
line.byte 0x00 "TCNTCMPCLR,Timer Compare Match Clear Register"
bitfld.byte 0x00 2. "CMPCLR5U,TCNT Compare Clear 5U" "0: Disables MTU5.TCNTU to be cleared to 0x0000..,1: Enables MTU5.TCNTU to be cleared to 0x0000 at.."
bitfld.byte 0x00 1. "CMPCLR5V,TCNT Compare Clear 5V" "0: Disables MTU5.TCNTV to be cleared to 0x0000..,1: Enables MTU5.TCNTV to be cleared to 0x0000 at.."
newline
bitfld.byte 0x00 0. "CMPCLR5W,TCNT Compare Clear 5W" "0: Disables MTU5.TCNTW to be cleared to 0x0000..,1: Enables MTU5.TCNTW to be cleared to 0x0000 at.."
tree.end
tree "MTU6"
base ad:0x90001900
group.byte 0x100++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x102++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 5. "BFB,Buffer Operation B" "0: TGRB and TGRD operate normally,1: TGRB and TGRD used together for buffer.."
bitfld.byte 0x00 4. "BFA,Buffer Operation A" "0: TGRA and TGRC operate normally,1: TGRA and TGRC used together for buffer.."
newline
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x104++0x00
line.byte 0x00 "TIORH,Timer I/O Control Register H"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x105++0x00
line.byte 0x00 "TIORL,Timer I/O Control Register L"
bitfld.byte 0x00 4.--7. "IOD,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOC,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x108++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
newline
bitfld.byte 0x00 3. "TGIED,TGR Interrupt Enable D" "0: Interrupt requests (TGID) disabled,1: Interrupt requests (TGID) enabled"
bitfld.byte 0x00 2. "TGIEC,TGR Interrupt Enable C" "0: Interrupt requests (TGIC) disabled,1: Interrupt requests (TGIC) enabled"
newline
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.word 0x110++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x118++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x11A++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.word 0x124++0x01
line.word 0x00 "TGRC,Timer General Register C"
group.word 0x126++0x01
line.word 0x00 "TGRD,Timer General Register D"
group.byte 0x12C++0x00
line.byte 0x00 "TSR,Timer Status Register"
rbitfld.byte 0x00 7. "TCFD,Count Direction Flag" "0: TCNT counts down,1: TCNT counts up"
bitfld.byte 0x00 5. "TCFU,Underflow flag" "0: TCNT underflow has not occurred when MTU1 and..,1: TCNT underflow has occurred when MTU1 and.."
newline
bitfld.byte 0x00 4. "TCFV,Overflow flag" "0: TCNT overflow has not occurred,1: TCNT overflow has occurred"
bitfld.byte 0x00 3. "TGFD,Input Capture/Output Compare Flag D" "0: TGRD input capture or compare match has not..,1: TGRD input capture or compare match has.."
newline
bitfld.byte 0x00 2. "TGFC,Input Capture/Output Compare Flag C" "0: TGRC input capture or compare match has not..,1: TGRC input capture or compare match has.."
bitfld.byte 0x00 1. "TGFB,Input Capture/Output Compare Flag B" "0: TGRB input capture or compare match has not..,1: TGRB input capture or compare match has.."
newline
bitfld.byte 0x00 0. "TGFA,Input Capture/Output Compare Flag A" "0: TGRA input capture or compare match has not..,1: TGRA input capture or compare match has.."
group.byte 0x138++0x00
line.byte 0x00 "TBTM,Timer Buffer Operation Transfer Mode Register"
bitfld.byte 0x00 1. "TTSB,Timing Select B" "0: When compare match B occurs in each channel..,1: When TCNT is cleared in each channel data is.."
bitfld.byte 0x00 0. "TTSA,Timing Select A" "0: When compare match A occurs in each channel..,1: When TCNT is cleared in each channel data is.."
group.byte 0x14C++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x150++0x00
line.byte 0x00 "TSYCR,Timer Synchronous Clear Register"
bitfld.byte 0x00 7. "CE0A,Clear Enable 0A" "0: Disables counter clearing by the MTU0.TGIA0..,1: Enables counter clearing by the MTU0.TGIA0.."
bitfld.byte 0x00 6. "CE0B,Clear Enable 0B" "0: Disables counter clearing by the MTU0.TGIB0..,1: Enables counter clearing by the MTU0.TGIB0.."
newline
bitfld.byte 0x00 5. "CE0C,Clear Enable 0C" "0: Disables counter clearing by the MTU0.TGIC0..,1: Enables counter clearing by the MTU0.TGIC0.."
bitfld.byte 0x00 4. "CE0D,Clear Enable 0D" "0: Disables counter clearing by the MTU0.TGID0..,1: Enables counter clearing by the MTU0.TGID0.."
newline
bitfld.byte 0x00 3. "CE1A,Clear Enable 1A" "0: Disables counter clearing by the MTU1.TGIA1..,1: Enables counter clearing by the MTU1.TGIA1.."
bitfld.byte 0x00 2. "CE1B,Clear Enable 1B" "0: Disables counter clearing by the MTU1.TGIB1..,1: Enables counter clearing by the MTU1.TGIB1.."
newline
bitfld.byte 0x00 1. "CE2A,Clear Enable 2A" "0: Disables counter clearing by the MTU2.TGIA2..,1: Enables counter clearing by the MTU2.TGIA2.."
bitfld.byte 0x00 0. "CE2B,Clear Enable 2B" "0: Disables counter clearing by the MTU2.TGIB2..,1: Enables counter clearing by the MTU2.TGIB2.."
group.word 0x172++0x01
line.word 0x00 "TGRE,Timer General Register E"
tree.end
tree "MTU7"
base ad:0x90001A00
group.byte 0x01++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
newline
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x03++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 5. "BFB,Buffer Operation B" "0: TGRB and TGRD operate normally,1: TGRB and TGRD used together for buffer.."
bitfld.byte 0x00 4. "BFA,Buffer Operation A" "0: TGRA and TGRC operate normally,1: TGRA and TGRC used together for buffer.."
newline
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x06++0x00
line.byte 0x00 "TIORH,Timer I/O Control Register H"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x07++0x00
line.byte 0x00 "TIORL,Timer I/O Control Register L"
bitfld.byte 0x00 4.--7. "IOD,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOC,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x09++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 7. "TTGE,A/D Converter Start Request Enable" "0: A/D converter start request generation disabled,1: A/D converter start request generation enabled"
bitfld.byte 0x00 6. "TTGE2,A/D Converter Start Request Enable 2" "0: A/D converter start request generation by..,1: A/D converter start request generation by.."
newline
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
bitfld.byte 0x00 3. "TGIED,TGR Interrupt Enable D" "0: Interrupt requests (TGID) disabled,1: Interrupt requests (TGID) enabled"
newline
bitfld.byte 0x00 2. "TGIEC,TGR Interrupt Enable C" "0: Interrupt requests (TGIC) disabled,1: Interrupt requests (TGIC) enabled"
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
newline
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.word 0x12++0x01
line.word 0x00 "TCNT,Timer Counter"
group.word 0x1C++0x01
line.word 0x00 "TGRA,Timer General Register A"
group.word 0x1E++0x01
line.word 0x00 "TGRB,Timer General Register B"
group.word 0x28++0x01
line.word 0x00 "TGRC,Timer General Register C"
group.word 0x2A++0x01
line.word 0x00 "TGRD,Timer General Register D"
group.byte 0x2D++0x00
line.byte 0x00 "TSR,Timer Status Register"
rbitfld.byte 0x00 7. "TCFD,Count Direction Flag" "0: TCNT counts down,1: TCNT counts up"
bitfld.byte 0x00 5. "TCFU,Underflow flag" "0: TCNT underflow has not occurred when MTU1 and..,1: TCNT underflow has occurred when MTU1 and.."
newline
bitfld.byte 0x00 4. "TCFV,Overflow flag" "0: TCNT overflow has not occurred,1: TCNT overflow has occurred"
bitfld.byte 0x00 3. "TGFD,Input Capture/Output Compare Flag D" "0: TGRD input capture or compare match has not..,1: TGRD input capture or compare match has.."
newline
bitfld.byte 0x00 2. "TGFC,Input Capture/Output Compare Flag C" "0: TGRC input capture or compare match has not..,1: TGRC input capture or compare match has.."
bitfld.byte 0x00 1. "TGFB,Input Capture/Output Compare Flag B" "0: TGRB input capture or compare match has not..,1: TGRB input capture or compare match has.."
newline
bitfld.byte 0x00 0. "TGFA,Input Capture/Output Compare Flag A" "0: TGRA input capture or compare match has not..,1: TGRA input capture or compare match has.."
group.byte 0x39++0x00
line.byte 0x00 "TBTM,Timer Buffer Operation Transfer Mode Register"
bitfld.byte 0x00 1. "TTSB,Timing Select B" "0: When compare match B occurs in each channel..,1: When TCNT is cleared in each channel data is.."
bitfld.byte 0x00 0. "TTSA,Timing Select A" "0: When compare match A occurs in each channel..,1: When TCNT is cleared in each channel data is.."
group.word 0x40++0x01
line.word 0x00 "TADCR,Timer A/D Converter Start Request Control Register"
bitfld.word 0x00 14.--15. "BF,MTU7.TADCOBRA/TADCOBRB Transfer Timing Select" "0,1,2,3"
bitfld.word 0x00 7. "UT7AE,Up-Count TRG7AN Enable" "0: A/D converter start requests (TRG7AN)..,1: A/D converter start requests (TRG7AN) enabled.."
newline
bitfld.word 0x00 6. "DT7AE,Down-Count TRG7AN Enable" "0: A/D converter start requests (TRG7AN)..,1: A/D converter start requests (TRG7AN) enabled.."
bitfld.word 0x00 5. "UT7BE,Up-Count TRG7BN Enable" "0: A/D converter start requests (TRG7BN)..,1: A/D converter start requests (TRG7BN) enabled.."
newline
bitfld.word 0x00 4. "DT7BE,Down-Count TRG7BN Enable" "0: A/D converter start requests (TRG7BN)..,1: A/D converter start requests (TRG7BN) enabled.."
bitfld.word 0x00 3. "ITA6AE,TGIA6 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG7AN and..,1: A/D converter start request signal TRG7AN and.."
newline
bitfld.word 0x00 2. "ITA7VE,TCIV7 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG7AN and..,1: A/D converter start request signal TRG7AN and.."
bitfld.word 0x00 1. "ITB6AE,TGIA6 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG7BN and..,1: A/D converter start request signal TRG7BN and.."
newline
bitfld.word 0x00 0. "ITB7VE,TCIV7 Interrupt Skipping Link Enable" "0: A/D converter start request signal TRG7BN and..,1: A/D converter start request signal TRG7BN and.."
group.word 0x44++0x01
line.word 0x00 "TADCORA,Timer A/D Converter Start Request Cycle Set Register A"
group.word 0x46++0x01
line.word 0x00 "TADCORB,Timer A/D Converter Start Request Cycle Set Register B"
group.word 0x48++0x01
line.word 0x00 "TADCOBRA,Timer A/D Converter Start Request Cycle Set Buffer Register A"
group.word 0x4A++0x01
line.word 0x00 "TADCOBRB,Timer A/D Converter Start Request Cycle Set Buffer Register B"
group.byte 0x4D++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.word 0x74++0x01
line.word 0x00 "TGRE,Timer General Register E"
group.word 0x76++0x01
line.word 0x00 "TGRF,Timer General Register F"
tree.end
tree "MTU8"
base ad:0x90001600
group.byte 0x00++0x00
line.byte 0x00 "TCR,Timer Control Register"
bitfld.byte 0x00 5.--7. "CCLR,Counter Clear Source Select" "0,1,2,3,4,5,6,7"
bitfld.byte 0x00 3.--4. "CKEG,Clock Edge Select" "0: Count at rising edge,1: Count at falling edge,2: Count at both edges,3: Count at both edges"
bitfld.byte 0x00 0.--2. "TPSC,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.byte 0x01++0x00
line.byte 0x00 "TMDR1,Timer Mode Register 1"
bitfld.byte 0x00 5. "BFB,Buffer Operation B" "0: TGRB and TGRD operate normally,1: TGRB and TGRD used together for buffer.."
bitfld.byte 0x00 4. "BFA,Buffer Operation A" "0: TGRA and TGRC operate normally,1: TGRA and TGRC used together for buffer.."
bitfld.byte 0x00 0.--3. "MD,Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x02++0x00
line.byte 0x00 "TIORH,Timer I/O Control Register H"
bitfld.byte 0x00 4.--7. "IOB,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOA,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x03++0x00
line.byte 0x00 "TIORL,Timer I/O Control Register L"
bitfld.byte 0x00 4.--7. "IOD,I/O Control B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.byte 0x00 0.--3. "IOC,I/O Control A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.byte 0x04++0x00
line.byte 0x00 "TIER,Timer Interrupt Enable Register"
bitfld.byte 0x00 4. "TCIEV,Overflow Interrupt Enable" "0: Interrupt requests (TCIV) disabled,1: Interrupt requests (TCIV) enabled"
bitfld.byte 0x00 3. "TGIED,TGR Interrupt Enable D" "0: Interrupt requests (TGID) disabled,1: Interrupt requests (TGID) enabled"
bitfld.byte 0x00 2. "TGIEC,TGR Interrupt Enable C" "0: Interrupt requests (TGIC) disabled,1: Interrupt requests (TGIC) enabled"
newline
bitfld.byte 0x00 1. "TGIEB,TGR Interrupt Enable B" "0: Interrupt requests (TGIB) disabled,1: Interrupt requests (TGIB) enabled"
bitfld.byte 0x00 0. "TGIEA,TGR Interrupt Enable A" "0: Interrupt requests (TGIA) disabled,1: Interrupt requests (TGIA) enabled"
group.byte 0x06++0x00
line.byte 0x00 "TCR2,Timer Control Register 2"
bitfld.byte 0x00 0.--2. "TPSC2,Time Prescaler Select" "0,1,2,3,4,5,6,7"
group.long 0x08++0x03
line.long 0x00 "TCNT,Timer Counter"
group.long 0x0C++0x03
line.long 0x00 "TGRA,Timer General Register A"
group.long 0x10++0x03
line.long 0x00 "TGRB,Timer General Register B"
group.long 0x14++0x03
line.long 0x00 "TGRC,Timer General Register C"
group.long 0x18++0x03
line.long 0x00 "TGRD,Timer General Register D"
tree.end
tree.end
tree "OTP (One-Time Programmable Memory)"
base ad:0x81028000
group.long 0x00++0x03
line.long 0x00 "OTPPWR,OTP Power Control Register"
bitfld.long 0x00 4. "ACCL,Selects OTP access I/F" "0: Not selected,1: Selected"
bitfld.long 0x00 0. "PWR,OTP power on/off setting" "0: Power off,1: Power on"
group.long 0x04++0x03
line.long 0x00 "OTPSTR,OTP Access Status Register"
rbitfld.long 0x00 15. "CNT_ST_IDLE,Indicates status of OTP controller" "0: Busy,1: Idle"
bitfld.long 0x00 9. "ERR_RDY_RD,OTP read command ready error" "0,1"
bitfld.long 0x00 8. "ERR_RDY_WR,OTP write command ready error" "0,1"
rbitfld.long 0x00 4. "ERR_RP,Read protection error" "0,1"
newline
rbitfld.long 0x00 3. "ERR_WP,Write protection error" "0,1"
rbitfld.long 0x00 1.--2. "ERR_WR,OTP write status" "0: PASS,1: Fail due to overwrites,2: Fail due to compare mismatch,3: Fail due to overwrites and compare mismatch"
rbitfld.long 0x00 0. "CMD_RDY,Indicates whether OTP controller is ready to receive command or not" "0: Not ready,1: Ready"
group.long 0x08++0x03
line.long 0x00 "OTPSTAWR,OTP Write Command Register"
bitfld.long 0x00 0. "STAWR,OTP write start" "0,1"
group.long 0x0C++0x03
line.long 0x00 "OTPADRWR,OTP Write Address Register"
hexmask.long.word 0x00 0.--8. 1. "ADRWR,OTP write address"
group.long 0x10++0x03
line.long 0x00 "OTPDATAWR,OTP Write Data Register"
hexmask.long.word 0x00 0.--15. 1. "DATAWR,OTP write data"
group.long 0x14++0x03
line.long 0x00 "OTPADRRD,OTP Read Address Register"
hexmask.long.word 0x00 0.--8. 1. "ADRRD,OTP read address"
rgroup.long 0x18++0x03
line.long 0x00 "OTPDATARD,OTP Read Data Register"
hexmask.long.word 0x00 0.--15. 1. "DATARD,OTP read data"
tree.end
tree "PHOSTIF (Parallel Host Interface)"
base ad:0x80242000
group.word 0x00++0x01
line.word 0x00 "HIFBCC,HOSTIF Bus Control Register"
bitfld.word 0x00 13. "WRPON," "0: INCR4,1: WRAP4"
bitfld.word 0x00 12. "BSTON," "0: Single transfer is used,1: Burst transfer is used"
newline
bitfld.word 0x00 8. "RBUFONX," "0: Read ahead function disabled,1: Read ahead function disabled"
bitfld.word 0x00 5. "RBUFON5," "0: Read-ahead function disabled,1: Read-ahead function disabled"
newline
bitfld.word 0x00 4. "RBUFON4," "0: Read-ahead function disabled,1: Read-ahead function disabled"
bitfld.word 0x00 3. "RBUFON3," "0: Read-ahead function disabled,1: Read-ahead function enabled"
newline
bitfld.word 0x00 2. "RBUFON2," "0: Read-ahead function disabled,1: Read-ahead function enabled"
bitfld.word 0x00 1. "RBUFON1," "0: Read-ahead function disabled,1: Read-ahead function disabled"
newline
bitfld.word 0x00 0. "RBUFON0," "0: Read-ahead function disabled,1: Read-ahead function enabled"
group.word 0x04++0x01
line.word 0x00 "HIFBTC,HOSTIF Timing Control Register"
bitfld.word 0x00 12.--13. "RDDTS," "0: No wait,1: Wait for 1 clock cycle of PCLKH,2: Wait for 2 clock cycles of PCLKH,3: Wait for 3 clock cycles of PCLKH"
bitfld.word 0x00 8.--10. "PASTD," "0: No wait,1: Wait for 1 clock cycle of PCLKH,2: Wait for 2 clock cycles of PCLKH,3: Wait for 3 clock cycles of PCLKH,4: Wait for 4 clock cycles of PCLKH,5: Wait for 5 clock cycles of PCLKH,6: Wait for 6 clock cycles of PCLKH,7: Wait for 7 clock cycles of PCLKH"
newline
bitfld.word 0x00 4.--5. "RDSTD,Specifies the timing for detecting the start of read operation by the HRD# signal" "0: Simultaneous with the detection of the..,1: Delay by 1 clock cycle of PCLKH from the..,2: Delay by 2 clock cycles of PCLKH from the..,3: Delay by 3 clock cycles of PCLKH from the.."
bitfld.word 0x00 0.--2. "WRSTD,Specifies the timing for detecting the start of write operation by the HWRSTB# signal" "0: Simultaneous with the detection of the..,1: Delay by 1 clock cycle of PCLKH from the..,2: Delay by 2 clock cycles of PCLKH from the..,3: Delay by 3 clock cycles of PCLKH from the..,4: Delay by 4 clock cycles of PCLKH from the..,5: Delay by 5 clock cycles of PCLKH from the..,6: Delay by 6 clock cycles of PCLKH from the..,7: Delay by 7 clock cycles of PCLKH from the.."
group.word 0x08++0x01
line.word 0x00 "HIFPRC,HOSTIF Page ROM Control Register"
bitfld.word 0x00 12. "PAGESZ," "0: 8-byte,1: 16-byte"
bitfld.word 0x00 8. "PAGEONX," "0: SRAM reading,1: Page ROM reading"
newline
bitfld.word 0x00 5. "PAGEON5," "0: SRAM reading,1: Page ROM reading"
bitfld.word 0x00 4. "PAGEON4," "0: SRAM reading,1: Page ROM reading"
newline
bitfld.word 0x00 3. "PAGEON3," "0: SRAM reading,1: Page ROM reading"
bitfld.word 0x00 2. "PAGEON2," "0: SRAM reading,1: Page ROM reading"
newline
bitfld.word 0x00 1. "PAGEON1," "0: SRAM reading,1: Page ROM reading"
bitfld.word 0x00 0. "PAGEON0," "0: SRAM reading,1: Page ROM reading"
group.word 0x0C++0x01
line.word 0x00 "HIFIRC,HOSTIF Interrupt Request Control Register"
bitfld.word 0x00 0. "ERRRSP,This bit is set to 1 on reception of an error response from internal slave modules" "0: No error response,1: Error response"
rgroup.long 0x10++0x03
line.long 0x00 "HIFECR0,HOSTIF Error Source Register 0"
hexmask.long 0x00 0.--31. 1. "ERRADDR,"
rgroup.word 0x14++0x01
line.word 0x00 "HIFECR1,HOSTIF Error Source Register 1"
bitfld.word 0x00 3. "ERRWR," "0: Reading,1: Writing"
bitfld.word 0x00 0.--2. "ERRSZ," "0: 8-bit,1: 16-bit,2: 32-bit,?..."
group.word 0x20++0x01
line.word 0x00 "HIFMON1,HOSTIF Monitor Register 1"
rbitfld.word 0x00 3. "HIFSYNC," "0: Asynchronous mode,1: Synchronous mode"
rbitfld.word 0x00 1. "BUSSEL," "0: 8-bit bus width,1: 16-bit bus width"
newline
bitfld.word 0x00 0. "HIFRDY," "0: Internal initializing,1: Internal initialization complete"
rgroup.word 0x24++0x01
line.word 0x00 "HIFMON2,HOSTIF Monitor Register 2"
bitfld.word 0x00 5. "HIFXAH," "0: Read only,1: Read and Write"
bitfld.word 0x00 4. "HIFXAL," "0: Read only,1: Read and Write"
newline
bitfld.word 0x00 3. "HIFIRC," "0: Read only,1: Read and Write"
bitfld.word 0x00 2. "HIFPRC," "0: Read only,1: Read and Write"
newline
bitfld.word 0x00 1. "HIFBTC," "0: Read only,1: Read and Write"
bitfld.word 0x00 0. "HIFBCC," "0: Read only,1: Read and Write"
rgroup.word 0x28++0x01
line.word 0x00 "HIFMON3,HOSTIF Monitor Register 3"
bitfld.word 0x00 1. "HIFEXT1," "0: Read only,1: Read and Write"
bitfld.word 0x00 0. "HIFEXT0," "0: Read only,1: Read and Write"
group.word 0x30++0x01
line.word 0x00 "HIFXAL,HOSTIF Specified Area Lower-limit Register"
hexmask.word 0x00 0.--8. 1. "XADDRL,Specifies the lower-limit address of the specified area to be set in the external bus address space"
group.word 0x34++0x01
line.word 0x00 "HIFXAH,HOSTIF Specified Area Upper-limit Register"
hexmask.word 0x00 0.--8. 1. "XADDRH,Specifies the upper-limit address of the specified area to be set in the external bus address space"
group.word 0x80++0x01
line.word 0x00 "HIFEXT0,HOSTIF Synchronous Burst Transfer Control Register 0"
bitfld.word 0x00 15. "MODTRN," "0: Single transfer only,1: Burst transfer is supported"
bitfld.word 0x00 9. "CNDWEO," "0: Simultaneous with data,1: Precedes the data by one clock cycle"
newline
bitfld.word 0x00 5. "KESWTO," "0: Rising edge,1: Falling edge"
bitfld.word 0x00 4. "KESDTO," "0: Rising edge,1: Falling edge"
newline
bitfld.word 0x00 3. "KESAVI," "0: Rising edge,1: Falling edge"
bitfld.word 0x00 2. "KESDTI," "0: Rising edge,1: Falling edge"
newline
bitfld.word 0x00 0. "KESSBI," "0: Rising edge,1: Falling edge"
group.word 0x84++0x01
line.word 0x00 "HIFEXT1,HOSTIF Synchronous Burst Transfer Control Register 1"
bitfld.word 0x00 8.--11. "DLYRA,Minimum time from the last input of the Low level on the HBS# pin to the point where read data can be acquired" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x00 0.--3. "DLYWA,Minimum time from the last input of the Low level on the HBS# pin to the point where write data is received" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "PHOSTIF_CFG (Parallel Host Interface Configuration)"
base ad:0x81281930
group.long 0x00++0x03
line.long 0x00 "PHCFG,PHOSTIF Configureation Register"
bitfld.long 0x00 20. "ADMUXMODE," "0,1"
bitfld.long 0x00 16. "HWRZSEL," "0: HWRSTB# is write strobe and HWR[1:0] is byte..,1: HWR[1:0]# is byte write strobe"
newline
bitfld.long 0x00 12. "MEMCSEL," "0: Synchronous/Asynchronous SRAM interface mode,1: Synchronous burst SRAM type transfer mode"
bitfld.long 0x00 8. "HIFSYNC," "0,1"
newline
bitfld.long 0x00 4. "BUSSSEL," "0: 8-bit bus width,1: 16-bit bus width"
bitfld.long 0x00 0. "MEMIFSEL," "0: Disables PHOSTIF,1: Enables PHOSTIF"
group.long 0x04++0x03
line.long 0x00 "PHACC,PHOSTIF Register Access Control Register"
bitfld.long 0x00 17. "BSCADMUX," "0: Disables,1: Enables"
bitfld.long 0x00 16. "CSSWAP," "0: Not swapped,1: Swapped"
newline
bitfld.long 0x00 15. "HIFEXT1SEL," "0: Read only,1: Read and Write"
bitfld.long 0x00 14. "HIFEXT0SEL," "0: Read only,1: Read and Write"
newline
bitfld.long 0x00 13. "HIFXAHSEL," "0: Read only,1: Read and Write"
bitfld.long 0x00 12. "HIFXALSEL," "0: Read only,1: Read and Write"
newline
bitfld.long 0x00 11. "HIFIRCSEL," "0: Read only,1: Read and Write"
bitfld.long 0x00 10. "HIFPRCSEL," "0: Read only,1: Read and Write"
newline
bitfld.long 0x00 9. "HIFBTCSEL," "0: Read only,1: Read and Write"
bitfld.long 0x00 8. "HIFBCCSEL," "0: Read only,1: Read and Write"
newline
bitfld.long 0x00 0. "HIFRDYSEL," "0: HIFRDY bit in HIFMON1 register indicates 0..,1: HIFRDY bit in HIFMON1 register indicates 1.."
tree.end
tree "POE3 (Port Output Enable 3)"
base ad:0x90005000
group.word 0x00++0x01
line.word 0x00 "ICSR1,Input Level Control/Status Register 1"
bitfld.word 0x00 12. "POE0F,POE0 Flag" "0: Indicates that a high-impedance request has..,1: Indicates that a high-impedance request has.."
bitfld.word 0x00 8. "PIE1,Port Interrupt Enable 1" "0: Interrupt requests disabled,1: Interrupt requests enabled"
newline
bitfld.word 0x00 0.--1. "POE0M,POE0 Mode Select" "0: Accepts a request on the falling edge of..,1: Accepts a request when POE0# pin input has..,2: Accepts a request when POE0# pin input has..,3: Accepts a request when POE0# pin input has.."
group.word 0x02++0x01
line.word 0x00 "OCSR1,Output Level Control/Status Register 1"
bitfld.word 0x00 15. "OSF1,Output Short Circuit Flag 1" "0: Indicates that outputs have not..,1: Indicates that outputs have simultaneously.."
bitfld.word 0x00 9. "OCE1,Output Short Circuit High-Impedance Enable 1" "0: Does not place the pins in the high-impedance..,1: Places the pins in the high-impedance state"
newline
bitfld.word 0x00 8. "OIE1,Output Short Circuit Interrupt Enable 1" "0: Interrupt requests disabled,1: Interrupt requests enabled"
group.word 0x04++0x01
line.word 0x00 "ICSR2,Input Level Control/Status Register 2"
bitfld.word 0x00 12. "POE4F,POE4 Flag" "0: Indicates that a high-impedance request has..,1: Indicates that a high-impedance request has.."
bitfld.word 0x00 8. "PIE2,Port Interrupt Enable 2" "0: Interrupt requests disabled,1: Interrupt requests enabled"
newline
bitfld.word 0x00 0.--1. "POE4M,POE4 Mode Select" "0: Accepts a request on the falling edge of..,1: Accepts a request when POE4# pin input has..,2: Accepts a request when POE4# pin input has..,3: Accepts a request when POE4# pin input has.."
group.word 0x06++0x01
line.word 0x00 "OCSR2,Output Level Control/Status Register 2"
bitfld.word 0x00 15. "OSF2,Output Short Circuit Flag 2" "0: Indicates that outputs have not..,1: Indicates that outputs have simultaneously.."
bitfld.word 0x00 9. "OCE2,Output Short Circuit High-Impedance Enable 2" "0: Does not place the pins in the high-impedance..,1: Places the pins in the high-impedance state"
newline
bitfld.word 0x00 8. "OIE2,Output Short Circuit Interrupt Enable 2" "0: Interrupt requests disabled,1: Interrupt requests enabled"
group.word 0x08++0x01
line.word 0x00 "ICSR3,Input Level Control/Status Register 3"
bitfld.word 0x00 12. "POE8F,POE8 Flag" "0: Indicates that a high-impedance request has..,1: Indicates that a high-impedance request has.."
bitfld.word 0x00 9. "POE8E,POE8 High-Impedance Enable" "0: Does not place the pin in the high-impedance..,1: Places the pin in the high-impedance state"
newline
bitfld.word 0x00 8. "PIE3,Port Interrupt Enable 3" "0: Interrupt requests disabled,1: Interrupt requests enabled"
bitfld.word 0x00 0.--1. "POE8M,POE8 Mode Select" "0: Accepts a request on the falling edge of..,1: Accepts a request when POE8# pin input has..,2: Accepts a request when POE8# pin input has..,3: Accepts a request when POE8# pin input has.."
group.byte 0x0A++0x00
line.byte 0x00 "SPOER,Software Port Output Enable Register"
bitfld.byte 0x00 2. "MTUCH0HIZ,MTU0 Pin High-Impedance Enable" "0: Does not place the pins in the high-impedance..,1: Places the pins in the high-impedance state"
bitfld.byte 0x00 1. "MTUCH67HIZ,MTU6 and MTU7 Output High-Impedance Enable" "0: Does not place the pins in the high-impedance..,1: Places the pins in the high-impedance state"
newline
bitfld.byte 0x00 0. "MTUCH34HIZ,MTU3 and MTU4 Output High-Impedance Enable" "0: Does not place the pins in the high-impedance..,1: Places the pins in the high-impedance state"
group.byte 0x0B++0x00
line.byte 0x00 "POECR1,Port Output Enable Control Register 1"
bitfld.byte 0x00 3. "MTU0DZE,MTIOC0D High-Impedance Enable" "0: Does not place the pin in high-impedance state,1: Places the pin in high-impedance state"
bitfld.byte 0x00 2. "MTU0CZE,MTIOC0C High-Impedance Enable" "0: Does not place the pin in high-impedance state,1: Places the pin in high-impedance state"
newline
bitfld.byte 0x00 1. "MTU0BZE,MTIOC0B High-Impedance Enable" "0: Does not place the pin in high-impedance state,1: Places the pin in high-impedance state"
bitfld.byte 0x00 0. "MTU0AZE,MTIOC0A High-Impedance Enable" "0: Does not place the pin in high-impedance state,1: Places the pin in high-impedance state"
group.word 0x0C++0x01
line.word 0x00 "POECR2,Port Output Enable Control Register 2"
bitfld.word 0x00 10. "MTU3BDZE,MTIOC3B/MTIOC3D High-Impedance Enable" "0: Does not place the pins in high-impedance state,1: Places the pins in high-impedance state"
bitfld.word 0x00 9. "MTU4ACZE,MTIOC4A/MTIOC4C High-Impedance Enable" "0: Does not place the pins in high-impedance state,1: Places the pins in high-impedance state"
newline
bitfld.word 0x00 8. "MTU4BDZE,MTIOC4B/MTIOC4D High-Impedance Enable" "0: Does not place the pins in high-impedance state,1: Places the pins in high-impedance state"
bitfld.word 0x00 2. "MTU6BDZE,MTIOC6B/MTIOC6D High-Impedance Enable" "0: Does not place the pins in high-impedance state,1: Places the pins in high-impedance state"
newline
bitfld.word 0x00 1. "MTU7ACZE,MTIOC7A/MTIOC7C High-Impedance Enable" "0: Does not place the pins in high-impedance state,1: Places the pins in high-impedance state"
bitfld.word 0x00 0. "MTU7BDZE,MTIOC7B/MTIOC7D High-Impedance Enable" "0: Does not place the pins in high-impedance state,1: Places the pins in high-impedance state"
group.word 0x10++0x01
line.word 0x00 "POECR4,Port Output Enable Control Register 4"
bitfld.word 0x00 15. "DE1ADDMT67ZE,MTU6 and MTU7 High-Impedance DERR1ST Add" "0: Does not add the status to the high-impedance..,1: Adds the status to the high-impedance control.."
bitfld.word 0x00 14. "DE0ADDMT67ZE,MTU6 and MTU7 High-Impedance DERR0ST Add" "0: Does not add the status to the high-impedance..,1: Adds the status to the high-impedance control.."
newline
bitfld.word 0x00 13. "IC5ADDMT67ZE,MTU6 and MTU7 High-Impedance POE11F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
bitfld.word 0x00 12. "IC4ADDMT67ZE,MTU6 and MTU7 High-Impedance POE10F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
newline
bitfld.word 0x00 11. "IC3ADDMT67ZE,MTU6 and MTU7 High-Impedance POE8F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
bitfld.word 0x00 9. "IC1ADDMT67ZE,MTU6 and MTU7 High-Impedance POE0F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
newline
bitfld.word 0x00 7. "DE1ADDMT34ZE,MTU3 and MTU4 High-Impedance DERR1ST Add" "0: Does not add the status to the high-impedance..,1: Adds the status to the high-impedance control.."
bitfld.word 0x00 6. "DE0ADDMT34ZE,MTU3 and MTU4 High-Impedance DERR0ST Add" "0: Does not add the status to the high-impedance..,1: Adds the status to the high-impedance control.."
newline
bitfld.word 0x00 5. "IC5ADDMT34ZE,MTU3 and MTU4 High-Impedance POE11F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
bitfld.word 0x00 4. "IC4ADDMT34ZE,MTU3 and MTU4 High-Impedance POE10F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
newline
bitfld.word 0x00 3. "IC3ADDMT34ZE,MTU3 and MTU4 High-Impedance POE8F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
bitfld.word 0x00 2. "IC2ADDMT34ZE,MTU3 and MTU4 High-Impedance POE4F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
group.word 0x12++0x01
line.word 0x00 "POECR5,Port Output Enable Control Register 5"
bitfld.word 0x00 7. "DE1ADDMT0ZE,MTU0 High-Impedance DERR1ST Add" "0: Does not add the status to the high-impedance..,1: Adds the status to the high-impedance control.."
bitfld.word 0x00 6. "DE0ADDMT0ZE,MTU0 High-Impedance DERR0ST Add" "0: Does not add the status to the high-impedance..,1: Adds the status to the high-impedance control.."
newline
bitfld.word 0x00 5. "IC5ADDMT0ZE,MTU0 High-Impedance POE11F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
bitfld.word 0x00 4. "IC4ADDMT0ZE,MTU0 High-Impedance POE10F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
newline
bitfld.word 0x00 2. "IC2ADDMT0ZE,MTU0 High-Impedance POE4F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
bitfld.word 0x00 1. "IC1ADDMT0ZE,MTU0 High-Impedance POE0F Add" "0: Does not add the flag to the high-impedance..,1: Adds the flag to the high-impedance control.."
group.word 0x16++0x01
line.word 0x00 "ICSR4,Input Level Control/Status Register 4"
bitfld.word 0x00 12. "POE10F,POE10 Flag" "0: Indicates that a high-impedance request has..,1: Indicates that a high-impedance request has.."
bitfld.word 0x00 9. "POE10E,POE10 High-Impedance Enable" "0: Does not place the pin in the high-impedance..,1: Places the pin in the high-impedance state"
newline
bitfld.word 0x00 8. "PIE4,Port Interrupt Enable 4" "0: Interrupt requests disabled,1: Interrupt requests enabled"
bitfld.word 0x00 0.--1. "POE10M,POE10 Mode Select" "0: Accepts a request on the falling edge of..,1: Accepts a request when POE10# pin input has..,2: Accepts a request when POE10# pin input has..,3: Accepts a request when POE10# pin input has.."
group.word 0x18++0x01
line.word 0x00 "ICSR5,Input Level Control/Status Register 5"
bitfld.word 0x00 12. "POE11F,POE11 Flag" "0: Indicates that a high-impedance request has..,1: Indicates that a high-impedance request has.."
bitfld.word 0x00 9. "POE11E,POE11 High-Impedance Enable" "0: Does not place the pin in the high-impedance..,1: Places the pin in the high-impedance state"
newline
bitfld.word 0x00 8. "PIE5,Port Interrupt Enable 5" "0: Interrupt requests disabled,1: Interrupt requests enabled"
bitfld.word 0x00 0.--1. "POE11M,POE11 Mode Select" "0: Accepts a request on the falling edge of..,1: Accepts a request when POE11# pin input has..,2: Accepts a request when POE11# pin input has..,3: Accepts a request when POE11# pin input has.."
group.word 0x1A++0x01
line.word 0x00 "ALR1,Active Level Setting Register 1"
bitfld.word 0x00 7. "OLSEN,Active Level Setting Enable" "0: Disabled,1: Enabled"
bitfld.word 0x00 5. "OLSG2B,MTIOC4D Pin Active Level Setting" "0: Active low,1: Active high"
newline
bitfld.word 0x00 4. "OLSG2A,MTIOC4B Pin Active Level Setting" "0: Active-low,1: Active-high"
bitfld.word 0x00 3. "OLSG1B,MTIOC4C Pin Active Level Setting" "0: Active-low,1: Active-high"
newline
bitfld.word 0x00 2. "OLSG1A,MTIOC4A Pin Active Level Setting" "0: Active-low,1: Active-high"
bitfld.word 0x00 1. "OLSG0B,MTIOC3D Pin Active Level Setting" "0: Active-low,1: Active-high"
newline
bitfld.word 0x00 0. "OLSG0A,MTIOC3B Pin Active Level Setting" "0: Active-low,1: Active-high"
group.word 0x1C++0x01
line.word 0x00 "ICSR6,Input Level Control/Status Register 6"
bitfld.word 0x00 12. "OSTSTF,Oscillation Stop High-Impedance Flag" "0: Indicates that a high-impedance request or..,1: Indicates that a high-impedance request by.."
bitfld.word 0x00 9. "OSTSTE,Oscillation Stop High-Impedance Enable" "0: Does not place the MTU complementary PWM..,1: Places the MTU complementary PWM output pins.."
group.word 0x1E++0x01
line.word 0x00 "ICSR7,Input Level Control/Status Register 7"
rbitfld.word 0x00 14. "DERR1ST,DSMIF1 Error Status" "0: Indicates that DSMIF1 error has not been..,1: Indicates that DSMIF1 error has been generated"
rbitfld.word 0x00 13. "DERR0ST,DSMIF0 Error Status" "0: Indicates that DSMIF0 error has not been..,1: Indicates that DSMIF0 error has been generated"
newline
bitfld.word 0x00 7. "DERR1IE,DSMIF1 Error Interrupt Enable" "0: Interrupt is disabled,1: Interrupt is enabled"
bitfld.word 0x00 6. "DERR0IE,DSMIF0 Error Interrupt Enable" "0: Interrupt is disabled,1: Interrupt is enabled"
group.byte 0x24++0x00
line.byte 0x00 "M0SELR1,MTU0 Pin Select Register 1"
bitfld.byte 0x00 4.--7. "M0BSEL,MTU0-B (MTIOC0B) Pin Select" "?,1: Controls the high-impedance state of P14_4..,2: Controls the high-impedance state of P24_0..,3: Controls the high-impedance state of P13_3..,?..."
bitfld.byte 0x00 0.--3. "M0ASEL,MTU0-A (MTIOC0A) Pin Select" "0: Controls the high-impedance state of P13_2..,1: Controls the high-impedance state of P14_3..,2: Controls the high-impedance state of P23_7..,?..."
group.byte 0x25++0x00
line.byte 0x00 "M0SELR2,MTU0 Pin Select Register 2"
bitfld.byte 0x00 4.--7. "M0DSEL,MTU0-D (MTIOC0D) Pin Select" "0: Controls the high-impedance state of P13_4..,1: Controls the high-impedance state of P15_2..,2: Controls the high-impedance state of P24_2..,?..."
bitfld.byte 0x00 0.--3. "M0CSEL,MTU0-C (MTIOC0C) Pin Select" "0: Controls the high-impedance state of P13_3..,1: Controls the high-impedance state of P15_1..,2: Controls the high-impedance state of P24_1..,?..."
group.byte 0x26++0x00
line.byte 0x00 "M3SELR,MTU3 Pin Select Register"
bitfld.byte 0x00 4.--7. "M3DSEL,MTU3-D (MTIOC3D) Pin Select" "0: Controls the high-impedance state of P18_1..,1: Controls the high-impedance state of P01_1..,2: Controls the high-impedance state of P04_0..,?..."
bitfld.byte 0x00 0.--3. "M3BSEL,MTU3-B (MTIOC3B) Pin Select" "0: Controls the high-impedance state of P17_6..,1: Controls the high-impedance state of P00_6..,2: Controls the high-impedance state of P03_6..,?..."
group.byte 0x27++0x00
line.byte 0x00 "M4SELR1,MTU4 Pin Select Register 1"
bitfld.byte 0x00 4.--7. "M4CSEL,MTU4-C (MTIOC4C) Pin Select" "0: Controls the high-impedance state of P18_0..,1: Controls the high-impedance state of P01_0..,2: Controls the high-impedance state of P05_2..,3: Controls the high-impedance state of P17_7..,?..."
bitfld.byte 0x00 0.--3. "M4ASEL,MTU4-A (MTIOC4A) Pin Select" "0: Controls the high-impedance state of P17_7..,1: Controls the high-impedance state of P00_7..,2: Controls the high-impedance state of P05_0..,3: Controls the high-impedance state of P18_0..,?..."
group.byte 0x28++0x00
line.byte 0x00 "M4SELR2,MTU4 Pin Select Register 2"
bitfld.byte 0x00 4.--7. "M4DSEL,MTU4-D (MTIOC4D) Pin Select" "0: Controls the high-impedance state of P18_3..,1: Controls the high-impedance state of P01_3..,2: Controls the high-impedance state of P05_3..,3: Controls the high-impedance state of P18_2..,?..."
bitfld.byte 0x00 0.--3. "M4BSEL,MTU4-B (MTIOC4B) Pin Select" "0: Controls the high-impedance state of P18_2..,1: Controls the high-impedance state of P01_2..,2: Controls the high-impedance state of P05_1..,3: Controls the high-impedance state of P18_3..,?..."
group.byte 0x2A++0x00
line.byte 0x00 "M6SELR,MTU6 Pin Select Register"
bitfld.byte 0x00 4.--7. "M6DSEL,MTU6-D (MTIOC6D) Pin Select" "?,1: Controls the high-impedance state of P21_4..,2: Controls the high-impedance state of P08_7..,?..."
bitfld.byte 0x00 0.--3. "M6BSEL,MTU6-B (MTIOC6B) Pin Select" "?,1: Controls the high-impedance state of P21_2..,2: Controls the high-impedance state of P08_5..,?..."
group.byte 0x2B++0x00
line.byte 0x00 "M7SELR1,MTU7 Pin Select Register 1"
bitfld.byte 0x00 4.--7. "M7CSEL,MTU7-C (MTIOC7C) Pin Select" "?,1: Controls the high-impedance state of P21_7..,2: Controls the high-impedance state of P09_2..,?..."
bitfld.byte 0x00 0.--3. "M7ASEL,MTU7-A (MTIOC7A) Pin Select" "?,1: Controls the high-impedance state of P21_5..,2: Controls the high-impedance state of P09_0..,?..."
group.byte 0x2C++0x00
line.byte 0x00 "M7SELR2,MTU7 Pin Select Register 2"
bitfld.byte 0x00 4.--7. "M7DSEL,MTU7-D (MTIOC7D) Pin Select" "?,1: Controls the high-impedance state of P22_0..,2: Controls the high-impedance state of P09_3..,?..."
bitfld.byte 0x00 0.--3. "M7BSEL,MTU7-B (MTIOC7B) Pin Select" "?,1: Controls the high-impedance state of P21_6..,2: Controls the high-impedance state of P09_1..,?..."
tree.end
tree "POEG (GPT Port Output Enable)"
tree "POEG0"
base ad:0x90006000
group.long 0x00++0x03
line.long 0x00 "POEG0GA,POEG0 Group A Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
bitfld.long 0x00 27. "DERR1E,Permit output disabled by DSMIF1 error detection" "0: Disable,1: Not disabled"
newline
bitfld.long 0x00 26. "DERR0E,Permit output disabled by DSMIF0 error detection" "0: Disable,1: Not disabled"
bitfld.long 0x00 25. "DERR1ST,DSMIF1 error status" "0: Not error detect,1: Error detect"
newline
bitfld.long 0x00 24. "DERR0ST,DSMIF0 error status" "0: Not error detect,1: Error detect"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0x400++0x03
line.long 0x00 "POEG0GB,POEG0 Group B Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
bitfld.long 0x00 27. "DERR1E,Permit output disabled by DSMIF1 error detection" "0: Disable,1: Not disabled"
newline
bitfld.long 0x00 26. "DERR0E,Permit output disabled by DSMIF0 error detection" "0: Disable,1: Not disabled"
bitfld.long 0x00 25. "DERR1ST,DSMIF1 error status" "0: Not error detect,1: Error detect"
newline
bitfld.long 0x00 24. "DERR0ST,DSMIF0 error status" "0: Not error detect,1: Error detect"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0x800++0x03
line.long 0x00 "POEG0GC,POEG0 Group C Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
bitfld.long 0x00 27. "DERR1E,Permit output disabled by DSMIF1 error detection" "0: Disable,1: Not disabled"
newline
bitfld.long 0x00 26. "DERR0E,Permit output disabled by DSMIF0 error detection" "0: Disable,1: Not disabled"
bitfld.long 0x00 25. "DERR1ST,DSMIF1 error status" "0: Not error detect,1: Error detect"
newline
bitfld.long 0x00 24. "DERR0ST,DSMIF0 error status" "0: Not error detect,1: Error detect"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0xC00++0x03
line.long 0x00 "POEG0GD,POEG0 Group D Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
bitfld.long 0x00 27. "DERR1E,Permit output disabled by DSMIF1 error detection" "0: Disable,1: Not disabled"
newline
bitfld.long 0x00 26. "DERR0E,Permit output disabled by DSMIF0 error detection" "0: Disable,1: Not disabled"
bitfld.long 0x00 25. "DERR1ST,DSMIF1 error status" "0: Not error detect,1: Error detect"
newline
bitfld.long 0x00 24. "DERR0ST,DSMIF0 error status" "0: Not error detect,1: Error detect"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
tree.end
tree "POEG1"
base ad:0x80047000
group.long 0x00++0x03
line.long 0x00 "POEG1GA,POEG1 Group A Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0x400++0x03
line.long 0x00 "POEG1GB,POEG1 Group B Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0x800++0x03
line.long 0x00 "POEG1GC,POEG1 Group C Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0xC00++0x03
line.long 0x00 "POEG1GD,POEG1 Group D Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
tree.end
tree "POEG2"
base ad:0x8100A000
group.long 0x00++0x03
line.long 0x00 "POEG2GA,POEG2 Group A Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0x400++0x03
line.long 0x00 "POEG2GB,POEG2 Group B Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0x800++0x03
line.long 0x00 "POEG2GC,POEG2 Group C Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
group.long 0xC00++0x03
line.long 0x00 "POEG2GD,POEG2 Group D Setting Register"
bitfld.long 0x00 30.--31. "NFCS,Noise filter Clock Select" "0: Samples the input level of GTETRGn pin three..,1: Samples the input level of GTETRGn pin three..,2: Samples the input level of GTETRGn pin three..,3: Samples the input level of GTETRGn pin three.."
bitfld.long 0x00 29. "NFEN,Noise filter Enable" "0: Digital noise filter on the GTETRGn pin is..,1: Digital noise filter on the GTETRGn pin is.."
newline
bitfld.long 0x00 28. "INV,GTETRGn Input Inverting" "0: Input on the GTETRGn pin is not inverted,1: Input on the GTETRGn pin is inverted"
rbitfld.long 0x00 16. "ST,GTETRGn Input Status Flag" "0: GTETRGn input after filtering was 0,1: GTETRGn input after filtering was 1"
newline
bitfld.long 0x00 6. "OSTPE,Enable Stopping Output on Stopping of Oscillation" "0: Detection of stopping of oscillation is..,1: Detection of stopping of oscillation is enabled"
bitfld.long 0x00 5. "IOCE,GPT Output Stop Request Enable" "0: Detection of stopping of output from the GPT..,1: Detection of stopping of output from the GPT.."
newline
bitfld.long 0x00 4. "PIDE,Port Input Detection Enable" "0: Detection of input levels on the..,1: Detection of input levels on the.."
bitfld.long 0x00 3. "SSF,Software Stop Flag" "0: Software has not stopped output,1: Software has stopped output"
newline
bitfld.long 0x00 2. "OSTPF,Oscillation Stop Detection Flag" "0: Stopping of oscillation was not detected,1: Stopping of oscillation was detected"
bitfld.long 0x00 1. "IOCF,GPT Output Stop Request Detection Flag" "0: Stopping of GPT output was not detected,1: Stopping of GPT output was detected"
newline
bitfld.long 0x00 0. "PIDF,Port Input Detection Flag" "0: The selected input level was not detected on..,1: The selected input level was detected on the.."
tree.end
tree.end
tree "PORT_NSR (I/O Ports (Non safety region))"
base ad:0x800A0000
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 )
group.byte ($2+0x00)++0x00
line.byte 0x00 "P$1,Port"
bitfld.byte 0x00 7. "POUT_7,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 6. "POUT_6,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 5. "POUT_5,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 4. "POUT_4,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 3. "POUT_3,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 2. "POUT_2,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 1. "POUT_1,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 0. "POUT_0,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
repeat.end
group.byte 0x0A++0x00
line.byte 0x00 "P10,Port 10 Register"
bitfld.byte 0x00 7. "POUT_7,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 6. "POUT_6,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 5. "POUT_5,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 4. "POUT_4,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 3. "POUT_3,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 2. "POUT_2,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 1. "POUT_1,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 0. "POUT_0,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC )
group.byte ($2+0x0C)++0x00
line.byte 0x00 "P$1,Port $1"
bitfld.byte 0x00 7. "POUT_7,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 6. "POUT_6,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 5. "POUT_5,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 4. "POUT_4,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 3. "POUT_3,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 2. "POUT_2,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 1. "POUT_1,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 0. "POUT_0,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
repeat.end
group.word 0x200++0x01
line.word 0x00 "PM00,Port 0 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM01,Port 1 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM02,Port 2 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM03,Port 3 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM04,Port 4 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM05,Port 5 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM06,Port 6 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM07,Port 7 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM08,Port 8 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM09,Port 9 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x214++0x01
line.word 0x00 "PM10,Port 10 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM12,Port 12 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM13,Port 13 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM14,Port 14 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM15,Port 15 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM16,Port 16 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM17,Port 17 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM18,Port 18 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM19,Port 19 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM20,Port 20 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM21,Port 21 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM22,Port 22 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM23,Port 23 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM24,Port 24 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 )
group.byte ($2+0x400)++0x00
line.byte 0x00 "PMC$1,Port"
bitfld.byte 0x00 7. "PMC7,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 6. "PMC6,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 5. "PMC5,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 4. "PMC4,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 3. "PMC3,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 2. "PMC2,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 1. "PMC1,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 0. "PMC0,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
repeat.end
group.byte 0x40A++0x00
line.byte 0x00 "PMC10,Port 10 Mode Control Register"
bitfld.byte 0x00 7. "PMC7,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 6. "PMC6,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 5. "PMC5,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 4. "PMC4,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 3. "PMC3,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 2. "PMC2,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 1. "PMC1,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 0. "PMC0,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C )
group.byte ($2+0x40C)++0x00
line.byte 0x00 "PMC$1,Port $1"
bitfld.byte 0x00 7. "PMC7,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 6. "PMC6,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 5. "PMC5,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 4. "PMC4,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 3. "PMC3,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 2. "PMC2,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 1. "PMC1,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 0. "PMC0,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
repeat.end
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 )
group.long ($2+0x600)++0x03
line.long 0x00 "PFC$1,Port"
bitfld.long 0x00 28.--31. "PFC7,Pm_7 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFC6,Pm_6 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "PFC5,Pm_5 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "PFC4,Pm_4 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "PFC3,Pm_3 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "PFC2,Pm_2 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "PFC1,Pm_1 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PFC0,Pm_0 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x628++0x03
line.long 0x00 "PFC10,Port 10 Function Control Register"
bitfld.long 0x00 28.--31. "PFC7,Pm_7 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFC6,Pm_6 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "PFC5,Pm_5 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "PFC4,Pm_4 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "PFC3,Pm_3 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "PFC2,Pm_2 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "PFC1,Pm_1 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PFC0,Pm_0 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 )
group.long ($2+0x630)++0x03
line.long 0x00 "PFC$1,Port $1"
bitfld.long 0x00 28.--31. "PFC7,Pm_7 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFC6,Pm_6 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "PFC5,Pm_5 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "PFC4,Pm_4 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "PFC3,Pm_3 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "PFC2,Pm_2 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "PFC1,Pm_1 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PFC0,Pm_0 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 )
rgroup.byte ($2+0x800)++0x00
line.byte 0x00 "PIN$1,Port"
bitfld.byte 0x00 7. "PIN7,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 6. "PIN6,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 5. "PIN5,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 4. "PIN4,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 3. "PIN3,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 2. "PIN2,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 1. "PIN1,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 0. "PIN0,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
repeat.end
rgroup.byte 0x80A++0x00
line.byte 0x00 "PIN10,Port 10 Input Register"
bitfld.byte 0x00 7. "PIN7,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 6. "PIN6,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 5. "PIN5,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 4. "PIN4,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 3. "PIN3,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 2. "PIN2,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 1. "PIN1,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 0. "PIN0,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C )
rgroup.byte ($2+0x80C)++0x00
line.byte 0x00 "PIN$1,Port $1"
bitfld.byte 0x00 7. "PIN7,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 6. "PIN6,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 5. "PIN5,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 4. "PIN4,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 3. "PIN3,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 2. "PIN2,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 1. "PIN1,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 0. "PIN0,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
repeat.end
group.long 0xA00++0x03
line.long 0x00 "DRCTL00_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA08++0x03
line.long 0x00 "DRCTL01_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA10++0x03
line.long 0x00 "DRCTL02_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA18++0x03
line.long 0x00 "DRCTL03_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA20++0x03
line.long 0x00 "DRCTL04_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA28++0x03
line.long 0x00 "DRCTL05_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA30++0x03
line.long 0x00 "DRCTL06_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA38++0x03
line.long 0x00 "DRCTL07_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA40++0x03
line.long 0x00 "DRCTL08_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA48++0x03
line.long 0x00 "DRCTL09_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA04++0x03
line.long 0x00 "DRCTL00_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA0C++0x03
line.long 0x00 "DRCTL01_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA14++0x03
line.long 0x00 "DRCTL02_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA1C++0x03
line.long 0x00 "DRCTL03_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA24++0x03
line.long 0x00 "DRCTL04_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA2C++0x03
line.long 0x00 "DRCTL05_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA34++0x03
line.long 0x00 "DRCTL06_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA3C++0x03
line.long 0x00 "DRCTL07_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA44++0x03
line.long 0x00 "DRCTL08_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA4C++0x03
line.long 0x00 "DRCTL09_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA50++0x03
line.long 0x00 "DRCTL10_L,I/O Buffer 10 Function Switching Register"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA54++0x03
line.long 0x00 "DRCTL10_H,I/O Buffer 10 Function Switching Register"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat 12. (strings "" "" "" "" "" "" "" "" "" "" "" "" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 0x40 0x48 0x50 0x58 )
group.long ($2+0xA60)++0x03
line.long 0x00 "DRCTL_L$1,I/O Buffer $1"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat.end
group.long 0xAC0++0x03
line.long 0x00 "DRCTL12_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat 12. (strings "" "" "" "" "" "" "" "" "" "" "" "" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 0x40 0x48 0x50 0x58 )
group.long ($2+0xA64)++0x03
line.long 0x00 "DRCTL_H$1,I/O Buffer $1"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat.end
group.long 0xAC4++0x03
line.long 0x00 "DRCTL12_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat 2. (strings "" "1" )(list 0x00 0x01 )
group.byte ($2+0xE00)++0x00
line.byte 0x00 "ELC_PGR$1,ELC Port Group Setting Register $1"
bitfld.byte 0x00 7. "PG7,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 6. "PG6,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
newline
bitfld.byte 0x00 5. "PG5,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 4. "PG4,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
newline
bitfld.byte 0x00 3. "PG3,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 2. "PG2,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
newline
bitfld.byte 0x00 1. "PG1,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 0. "PG0,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
repeat.end
repeat 2. (strings "" "1" )(list 0x00 0x01 )
group.byte ($2+0xE02)++0x00
line.byte 0x00 "ELC_PGC$1,ELC Port Group Control Register $1"
bitfld.byte 0x00 4.--6. "PGCO,Port Group Operation Select" "0: 0 is output when the event is input,1: 1 is output when the event is input,2: The toggled (inverted) value is output when..,3: The buffer value is output when the event is..,4: Setting prohibited,5: Setting prohibited,6: Setting prohibited,7: Setting prohibited"
bitfld.byte 0x00 2. "PGCOVE,PDBF Over" "0: Overwriting ELC_PDBFn register is disabled,1: Overwriting ELC_PDBFn register is enabled"
newline
bitfld.byte 0x00 0.--1. "PGCI,Event Output Edge Select" "0: Event is generated on detection of the rising..,1: Event is generated on detection of the..,2: Event is generated on detection of both the..,3: Event is generated on detection of both the.."
repeat.end
repeat 2. (strings "" "1" )(list 0x00 0x04 )
group.byte ($2+0xE04)++0x00
line.byte 0x00 "ELC_PDBF$1,ELC Port Buffer Register $1"
bitfld.byte 0x00 7. "PB7,Port Buffer 7" "0,1"
bitfld.byte 0x00 6. "PB6,Port Buffer 6" "0,1"
newline
bitfld.byte 0x00 5. "PB5,Port Buffer 5" "0,1"
bitfld.byte 0x00 4. "PB4,Port Buffer 4" "0,1"
newline
bitfld.byte 0x00 3. "PB3,Port Buffer 3" "0,1"
bitfld.byte 0x00 2. "PB2,Port Buffer 2" "0,1"
newline
bitfld.byte 0x00 1. "PB1,Port Buffer 1" "0,1"
bitfld.byte 0x00 0. "PB0,Port Buffer 0" "0,1"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x01 0x02 0x03 )
group.byte ($2+0xE0C)++0x00
line.byte 0x00 "ELC_PEL$1,ELC Port Setting Register"
bitfld.byte 0x00 5.--6. "PSM,Event Link Specification" "0: For the output port 0 is output when the..,1: For the output port 1 is output when the..,2: For the output port the toggled (inverted)..,3: For the output port the toggled (inverted).."
bitfld.byte 0x00 3.--4. "PSP,Port Number Specification" "0: Setting prohibited,1: Port 16 (corresponding to ELC_PGR1),2: Port 18 (corresponding to ELC_PGR2),3: Setting prohibited"
newline
bitfld.byte 0x00 0.--2. "PSB,Bit Number Specification" "0,1,2,3,4,5,6,7"
repeat.end
group.byte 0xE10++0x00
line.byte 0x00 "ELC_DPTC,ELC Edge Detection Control Register"
bitfld.byte 0x00 3. "PTC3,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
bitfld.byte 0x00 2. "PTC2,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
newline
bitfld.byte 0x00 1. "PTC1,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
bitfld.byte 0x00 0. "PTC0,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
group.byte 0xE11++0x00
line.byte 0x00 "ELC_ELSR2,ELC Port Event Control Register"
bitfld.byte 0x00 7. "PES3,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
bitfld.byte 0x00 6. "PES2,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
newline
bitfld.byte 0x00 5. "PES1,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
bitfld.byte 0x00 4. "PES0,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
newline
bitfld.byte 0x00 3. "PEG2,ELC Port Buffer Register (ELC_PDBFn) write access control" "0: When not use event link function of input..,1: When use event link function of input port.."
bitfld.byte 0x00 2. "PEG1,ELC Port Buffer Register (ELC_PDBFn) write access control" "0: When not use event link function of input..,1: When use event link function of input port.."
tree.end
tree "PORT_SR (I/O Ports (Safety region))"
base ad:0x81030000
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 )
group.byte ($2+0x00)++0x00
line.byte 0x00 "P$1,Port"
bitfld.byte 0x00 7. "POUT_7,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 6. "POUT_6,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 5. "POUT_5,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 4. "POUT_4,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 3. "POUT_3,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 2. "POUT_2,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 1. "POUT_1,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 0. "POUT_0,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
repeat.end
group.byte 0x0A++0x00
line.byte 0x00 "P10,Port 10 Register"
bitfld.byte 0x00 7. "POUT_7,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 6. "POUT_6,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 5. "POUT_5,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 4. "POUT_4,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 3. "POUT_3,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 2. "POUT_2,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 1. "POUT_1,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 0. "POUT_0,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC )
group.byte ($2+0x0C)++0x00
line.byte 0x00 "P$1,Port $1"
bitfld.byte 0x00 7. "POUT_7,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 6. "POUT_6,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 5. "POUT_5,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 4. "POUT_4,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 3. "POUT_3,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 2. "POUT_2,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
newline
bitfld.byte 0x00 1. "POUT_1,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
bitfld.byte 0x00 0. "POUT_0,Pm_n Output Data Store (n: bit position)" "0: Low output,1: High output"
repeat.end
group.word 0x200++0x01
line.word 0x00 "PM00,Port 0 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM01,Port 1 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM02,Port 2 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM03,Port 3 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM04,Port 4 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM05,Port 5 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM06,Port 6 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM07,Port 7 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM08,Port 8 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x200++0x01
line.word 0x00 "PM09,Port 9 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x214++0x01
line.word 0x00 "PM10,Port 10 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM12,Port 12 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM13,Port 13 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM14,Port 14 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM15,Port 15 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM16,Port 16 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM17,Port 17 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM18,Port 18 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM19,Port 19 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM20,Port 20 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM21,Port 21 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM22,Port 22 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM23,Port 23 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
group.word 0x218++0x01
line.word 0x00 "PM24,Port 24 Mode Register"
bitfld.word 0x00 14.--15. "PM7,Pm_7 I/O Select" "0,1,2,3"
bitfld.word 0x00 12.--13. "PM6,Pm_6 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 10.--11. "PM5,Pm_5 I/O Select" "0,1,2,3"
bitfld.word 0x00 8.--9. "PM4,Pm_4 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 6.--7. "PM3,Pm_3 I/O Select" "0,1,2,3"
bitfld.word 0x00 4.--5. "PM2,Pm_2 I/O Select" "0,1,2,3"
newline
bitfld.word 0x00 2.--3. "PM1,Pm_1 I/O Select" "0,1,2,3"
bitfld.word 0x00 0.--1. "PM0,Pm_0 I/O Select" "0: Hi-Z,1: Input,2: Output (Output data is not input to input..,3: Output (Output data is input to input buffer)"
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 )
group.byte ($2+0x400)++0x00
line.byte 0x00 "PMC$1,Port"
bitfld.byte 0x00 7. "PMC7,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 6. "PMC6,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 5. "PMC5,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 4. "PMC4,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 3. "PMC3,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 2. "PMC2,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 1. "PMC1,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 0. "PMC0,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
repeat.end
group.byte 0x40A++0x00
line.byte 0x00 "PMC10,Port 10 Mode Control Register"
bitfld.byte 0x00 7. "PMC7,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 6. "PMC6,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 5. "PMC5,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 4. "PMC4,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 3. "PMC3,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 2. "PMC2,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 1. "PMC1,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 0. "PMC0,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C )
group.byte ($2+0x40C)++0x00
line.byte 0x00 "PMC$1,Port $1"
bitfld.byte 0x00 7. "PMC7,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 6. "PMC6,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 5. "PMC5,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 4. "PMC4,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 3. "PMC3,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 2. "PMC2,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
newline
bitfld.byte 0x00 1. "PMC1,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
bitfld.byte 0x00 0. "PMC0,Pm_n Pin Mode Control (n: bit position)" "0: Uses the pin as a general I/O pin,1: Uses the pin as an I/O port for peripheral.."
repeat.end
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 )
group.long ($2+0x600)++0x03
line.long 0x00 "PFC$1,Port"
bitfld.long 0x00 28.--31. "PFC7,Pm_7 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFC6,Pm_6 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "PFC5,Pm_5 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "PFC4,Pm_4 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "PFC3,Pm_3 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "PFC2,Pm_2 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "PFC1,Pm_1 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PFC0,Pm_0 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x628++0x03
line.long 0x00 "PFC10,Port 10 Function Control Register"
bitfld.long 0x00 28.--31. "PFC7,Pm_7 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFC6,Pm_6 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "PFC5,Pm_5 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "PFC4,Pm_4 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "PFC3,Pm_3 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "PFC2,Pm_2 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "PFC1,Pm_1 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PFC0,Pm_0 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 )
group.long ($2+0x630)++0x03
line.long 0x00 "PFC$1,Port $1"
bitfld.long 0x00 28.--31. "PFC7,Pm_7 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "PFC6,Pm_6 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "PFC5,Pm_5 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "PFC4,Pm_4 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 12.--15. "PFC3,Pm_3 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "PFC2,Pm_2 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 4.--7. "PFC1,Pm_1 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "PFC0,Pm_0 Pin function Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 )
rgroup.byte ($2+0x800)++0x00
line.byte 0x00 "PIN$1,Port"
bitfld.byte 0x00 7. "PIN7,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 6. "PIN6,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 5. "PIN5,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 4. "PIN4,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 3. "PIN3,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 2. "PIN2,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 1. "PIN1,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 0. "PIN0,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
repeat.end
rgroup.byte 0x80A++0x00
line.byte 0x00 "PIN10,Port 10 Input Register"
bitfld.byte 0x00 7. "PIN7,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 6. "PIN6,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 5. "PIN5,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 4. "PIN4,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 3. "PIN3,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 2. "PIN2,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 1. "PIN1,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 0. "PIN0,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C )
rgroup.byte ($2+0x80C)++0x00
line.byte 0x00 "PIN$1,Port $1"
bitfld.byte 0x00 7. "PIN7,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 6. "PIN6,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 5. "PIN5,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 4. "PIN4,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 3. "PIN3,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 2. "PIN2,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
newline
bitfld.byte 0x00 1. "PIN1,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
bitfld.byte 0x00 0. "PIN0,Pm_n Pin Input (n: bit position)" "0: Low input,1: High input"
repeat.end
group.long 0xA00++0x03
line.long 0x00 "DRCTL00_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA08++0x03
line.long 0x00 "DRCTL01_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA10++0x03
line.long 0x00 "DRCTL02_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA18++0x03
line.long 0x00 "DRCTL03_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA20++0x03
line.long 0x00 "DRCTL04_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA28++0x03
line.long 0x00 "DRCTL05_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA30++0x03
line.long 0x00 "DRCTL06_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA38++0x03
line.long 0x00 "DRCTL07_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA40++0x03
line.long 0x00 "DRCTL08_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA48++0x03
line.long 0x00 "DRCTL09_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA04++0x03
line.long 0x00 "DRCTL00_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA0C++0x03
line.long 0x00 "DRCTL01_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA14++0x03
line.long 0x00 "DRCTL02_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA1C++0x03
line.long 0x00 "DRCTL03_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA24++0x03
line.long 0x00 "DRCTL04_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA2C++0x03
line.long 0x00 "DRCTL05_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA34++0x03
line.long 0x00 "DRCTL06_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA3C++0x03
line.long 0x00 "DRCTL07_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA44++0x03
line.long 0x00 "DRCTL08_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA4C++0x03
line.long 0x00 "DRCTL09_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA50++0x03
line.long 0x00 "DRCTL10_L,I/O Buffer 10 Function Switching Register"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
group.long 0xA54++0x03
line.long 0x00 "DRCTL10_H,I/O Buffer 10 Function Switching Register"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat 12. (strings "" "" "" "" "" "" "" "" "" "" "" "" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 0x40 0x48 0x50 0x58 )
group.long ($2+0xA60)++0x03
line.long 0x00 "DRCTL_L$1,I/O Buffer $1"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat.end
group.long 0xAC0++0x03
line.long 0x00 "DRCTL12_L,I/O Buffer"
bitfld.long 0x00 29. "SR3,Pm_3 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT3,Pm_3 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD3,Pm_3 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV3,Pm_3 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR2,Pm_2 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT2,Pm_2 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD2,Pm_2 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV2,Pm_2 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR1,Pm_1 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT1,Pm_1 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD1,Pm_1 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV1,Pm_1 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR0,Pm_0 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT0,Pm_0 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD0,Pm_0 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV0,Pm_0 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat 12. (strings "" "" "" "" "" "" "" "" "" "" "" "" )(list 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 0x40 0x48 0x50 0x58 )
group.long ($2+0xA64)++0x03
line.long 0x00 "DRCTL_H$1,I/O Buffer $1"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat.end
group.long 0xAC4++0x03
line.long 0x00 "DRCTL12_H,I/O Buffer"
bitfld.long 0x00 29. "SR7,Pm_7 Slew Rate Control" "0,1"
bitfld.long 0x00 28. "SMT7,Pm_7 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 26.--27. "PUD7,Pm_7 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 24.--25. "DRV7,Pm_7 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 21. "SR6,Pm_6 Slew Rate Control" "0,1"
bitfld.long 0x00 20. "SMT6,Pm_6 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 18.--19. "PUD6,Pm_6 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 16.--17. "DRV6,Pm_6 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 13. "SR5,Pm_5 Slew Rate Control" "0,1"
bitfld.long 0x00 12. "SMT5,Pm_5 Schmitt Trigger Control" "0,1"
newline
bitfld.long 0x00 10.--11. "PUD5,Pm_5 Pull-Up/Down Control" "0,1,2,3"
bitfld.long 0x00 8.--9. "DRV5,Pm_5 Driving Ability Control" "0,1,2,3"
newline
bitfld.long 0x00 5. "SR4,Pm_4 Slew Rate Control" "0: Slow,1: Fast"
bitfld.long 0x00 4. "SMT4,Pm_4 Schmitt Trigger Control" "0: Disable Schmitt Trigger input,1: Enable Schmitt Trigger input"
newline
bitfld.long 0x00 2.--3. "PUD4,Pm_4 Pull-Up/Down Control" "0: No pull-up/down,1: Pull-up,2: Pull-down,3: Setting prohibited"
bitfld.long 0x00 0.--1. "DRV4,Pm_4 Driving Ability Control" "0: Low,1: Middle,2: High,3: Ultra High"
repeat 2. (strings "" "1" )(list 0x00 0x01 )
group.byte ($2+0xE00)++0x00
line.byte 0x00 "ELC_PGR$1,ELC Port Group Setting Register $1"
bitfld.byte 0x00 7. "PG7,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 6. "PG6,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
newline
bitfld.byte 0x00 5. "PG5,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 4. "PG4,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
newline
bitfld.byte 0x00 3. "PG3,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 2. "PG2,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
newline
bitfld.byte 0x00 1. "PG1,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
bitfld.byte 0x00 0. "PG0,Port Group Setting" "0: The port bit is not specified as a member of..,1: The port bit is specified as a member of the.."
repeat.end
repeat 2. (strings "" "1" )(list 0x00 0x01 )
group.byte ($2+0xE02)++0x00
line.byte 0x00 "ELC_PGC$1,ELC Port Group Control Register $1"
bitfld.byte 0x00 4.--6. "PGCO,Port Group Operation Select" "0: 0 is output when the event is input,1: 1 is output when the event is input,2: The toggled (inverted) value is output when..,3: The buffer value is output when the event is..,4: Setting prohibited,5: Setting prohibited,6: Setting prohibited,7: Setting prohibited"
bitfld.byte 0x00 2. "PGCOVE,PDBF Over" "0: Overwriting ELC_PDBFn register is disabled,1: Overwriting ELC_PDBFn register is enabled"
newline
bitfld.byte 0x00 0.--1. "PGCI,Event Output Edge Select" "0: Event is generated on detection of the rising..,1: Event is generated on detection of the..,2: Event is generated on detection of both the..,3: Event is generated on detection of both the.."
repeat.end
repeat 2. (strings "" "1" )(list 0x00 0x04 )
group.byte ($2+0xE04)++0x00
line.byte 0x00 "ELC_PDBF$1,ELC Port Buffer Register $1"
bitfld.byte 0x00 7. "PB7,Port Buffer 7" "0,1"
bitfld.byte 0x00 6. "PB6,Port Buffer 6" "0,1"
newline
bitfld.byte 0x00 5. "PB5,Port Buffer 5" "0,1"
bitfld.byte 0x00 4. "PB4,Port Buffer 4" "0,1"
newline
bitfld.byte 0x00 3. "PB3,Port Buffer 3" "0,1"
bitfld.byte 0x00 2. "PB2,Port Buffer 2" "0,1"
newline
bitfld.byte 0x00 1. "PB1,Port Buffer 1" "0,1"
bitfld.byte 0x00 0. "PB0,Port Buffer 0" "0,1"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x01 0x02 0x03 )
group.byte ($2+0xE0C)++0x00
line.byte 0x00 "ELC_PEL$1,ELC Port Setting Register"
bitfld.byte 0x00 5.--6. "PSM,Event Link Specification" "0: For the output port 0 is output when the..,1: For the output port 1 is output when the..,2: For the output port the toggled (inverted)..,3: For the output port the toggled (inverted).."
bitfld.byte 0x00 3.--4. "PSP,Port Number Specification" "0: Setting prohibited,1: Port 16 (corresponding to ELC_PGR1),2: Port 18 (corresponding to ELC_PGR2),3: Setting prohibited"
newline
bitfld.byte 0x00 0.--2. "PSB,Bit Number Specification" "0,1,2,3,4,5,6,7"
repeat.end
group.byte 0xE10++0x00
line.byte 0x00 "ELC_DPTC,ELC Edge Detection Control Register"
bitfld.byte 0x00 3. "PTC3,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
bitfld.byte 0x00 2. "PTC2,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
newline
bitfld.byte 0x00 1. "PTC1,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
bitfld.byte 0x00 0. "PTC0,Single Input Port n Edge Detection" "0: Disable edge detection for Single Input Port n,1: Enable edge detection for Single Input Port n"
group.byte 0xE11++0x00
line.byte 0x00 "ELC_ELSR2,ELC Port Event Control Register"
bitfld.byte 0x00 7. "PES3,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
bitfld.byte 0x00 6. "PES2,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
newline
bitfld.byte 0x00 5. "PES1,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
bitfld.byte 0x00 4. "PES0,Single Port n Event Link Function Enable" "0: Disable Single Port event link function,1: Enable Single Port event link function"
newline
bitfld.byte 0x00 3. "PEG2,ELC Port Buffer Register (ELC_PDBFn) write access control" "0: When not use event link function of input..,1: When use event link function of input port.."
bitfld.byte 0x00 2. "PEG1,ELC Port Buffer Register (ELC_PDBFn) write access control" "0: When not use event link function of input..,1: When use event link function of input port.."
tree.end
tree "PTADR (Port Address Selection)"
base ad:0x81030C00
repeat 10. (strings "00" "01" "02" "03" "04" "05" "06" "07" "08" "09" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 )
group.byte ($2+0x00)++0x00
line.byte 0x00 "RSELP$1,Port"
bitfld.byte 0x00 7. "RS7,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 6. "RS6,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 5. "RS5,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
newline
bitfld.byte 0x00 4. "RS4,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 3. "RS3,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 2. "RS2,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
newline
bitfld.byte 0x00 1. "RS1,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 0. "RS0,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
repeat.end
group.byte 0x0A++0x00
line.byte 0x00 "RSELP10,Port 10 Region Select Register"
bitfld.byte 0x00 7. "RS7,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 6. "RS6,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 5. "RS5,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
newline
bitfld.byte 0x00 4. "RS4,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 3. "RS3,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 2. "RS2,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
newline
bitfld.byte 0x00 1. "RS1,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 0. "RS0,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
repeat 13. (strings "" "" "" "" "" "" "" "" "" "" "" "" "12" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC )
group.byte ($2+0x0C)++0x00
line.byte 0x00 "RSELP$1,Port $1"
bitfld.byte 0x00 7. "RS7,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 6. "RS6,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 5. "RS5,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
newline
bitfld.byte 0x00 4. "RS4,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 3. "RS3,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 2. "RS2,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
newline
bitfld.byte 0x00 1. "RS1,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
bitfld.byte 0x00 0. "RS0,Pm_n pin I/O port registers Region Select (n = bit position)" "0: Safety region (Address is 0x8103_0xxx),1: Non safety region (Address is 0x800A_0xxx)"
repeat.end
tree.end
tree "RTC (Real-time Counter)"
base ad:0x81009000
group.long 0x00++0x03
line.long 0x00 "RTCA0CTL0,RTC Control Register 0"
bitfld.long 0x00 7. "RTCA0CE,RTC Controller Enable Bit" "0: Clock counter operation stopped,1: Clock counter operation enabled (the clock.."
rbitfld.long 0x00 6. "RTCA0CEST,RTC Controller Enable Status" "0: Clock counter operation stopped status,1: Clock counter operation enabled status (the.."
newline
bitfld.long 0x00 5. "RTCA0AMPM,RTCA0HOUR RTCA0ALH display format selection bit" "0: 12-hour display,1: 24-hour display"
bitfld.long 0x00 4. "RTCA0SLSB,RTCA0SCMP enable/disable setting" "0,1"
group.long 0x04++0x03
line.long 0x00 "RTCA0CTL1,RTC Control Register 1"
bitfld.long 0x00 5. "RTCA01HZE,This bit enables/disables 1 Hz pulse output (RTCAT1HZ)" "0: Disable 1 Hz pulse output (RTCAT1HZ fixed to 0),1: Enable 1 Hz pulse output"
bitfld.long 0x00 4. "RTCA0ALME,Alarm interrupt (RTC_ALM) output enable bit" "0: Disable,1: Enable"
newline
bitfld.long 0x00 3. "RTCA01SE,1 second interrupt (RTC_1S) output enable bit" "0: Stop interrupt output at every 1 second,1: Enable interrupt output at every 1 second"
bitfld.long 0x00 0.--2. "RTCA0CT,Fixed interval interrupt (RTC_PRD) output setting bit" "0: Fixed interval interrupt output stop,1: Interrupt once every 0.25 seconds (in..,2: Interrupt once every 0.5 seconds (in..,3: Interrupt once every 1 second (in..,4: Interrupt once every 1 minute (every 1 minute..,5: Interrupt once every 1 hour (every 1 hour 00..,6: Interrupt once every 1 day (every 1 day 00..,7: Interrupt once every 1 month (every 1 month.."
group.long 0x08++0x03
line.long 0x00 "RTCA0CTL2,RTC Control Register 2"
rbitfld.long 0x00 4. "RTCA0WSST,RTCA0SCMP Write Status" "0: RTCA0SCMP write completed,1: RTCA0SCMP write in progress"
rbitfld.long 0x00 3. "RTCA0RSST,RTCA0SRBU Transfer Status" "0: RTCA0SRBU data hold status,1: Transfer of the value of RTCA0SUBC to.."
newline
bitfld.long 0x00 2. "RTCA0RSUB,RTCA0SUBC Data Transfer Control" "0: RTCA0SRBU data hold,1: Transfer of value of RTCA0SUBC to RTCA0SRBU"
rbitfld.long 0x00 1. "RTCA0WST,RTC Controller Counter Wait Status" "0: Count-up status of RTCA0SECC RTCA0MINC..,1: Count-up stopped status of RTCA0SECC.."
newline
bitfld.long 0x00 0. "RTCA0WAIT,RTC Controller Counter Wait Control" "0: Counter operation,1: Count-up operation of RTCA0SEC RTCA0MIN.."
rgroup.long 0x0C++0x03
line.long 0x00 "RTCA0SUBC,RTC Sub Count Register"
hexmask.long.tbyte 0x00 0.--21. 1. "RTCA0SUBC,Register that counts the 1 second reference time"
rgroup.long 0x10++0x03
line.long 0x00 "RTCA0SRBU,RTC Sub Count Register Read Buffer"
hexmask.long.tbyte 0x00 0.--21. 1. "RTCA0SRBU,Read buffer register of RTCA0SUBC"
group.long 0x14++0x03
line.long 0x00 "RTCA0SEC,RTC Sec Count Buffer Register"
hexmask.long.byte 0x00 0.--6. 1. "RTCA0SEC,Buffer register to read/write RTC Second Count register (RTCA0SECC)"
group.long 0x18++0x03
line.long 0x00 "RTCA0MIN,RTC Min Count Buffer Register"
hexmask.long.byte 0x00 0.--6. 1. "RTCA0MIN,Buffer register to read/write RTC Minute Count register (RTCA0MINC)"
group.long 0x1C++0x03
line.long 0x00 "RTCA0HOUR,RTC Hour Count Buffer Register"
bitfld.long 0x00 0.--5. "RTCA0HOUR,Buffer register to read/write RTC Hour Count register (RTCA0HOURC)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x20++0x03
line.long 0x00 "RTCA0WEEK,RTC Week Count Buffer Register"
bitfld.long 0x00 0.--2. "RTCA0WEEK,Buffer register to read/write RTC Week Count register (RTCA0WEEKC)" "0,1,2,3,4,5,6,7"
group.long 0x24++0x03
line.long 0x00 "RTCA0DAY,RTC Day Count Buffer Register"
bitfld.long 0x00 0.--5. "RTCA0DAY,Buffer register to read/write RTC Day Count register (RTCA0DAYC)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x28++0x03
line.long 0x00 "RTCA0MONTH,RTC Month Count Buffer Register"
bitfld.long 0x00 0.--4. "RTCA0MONTH,Buffer register to read/write RTC Month Count register (RTCA0MONC)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x2C++0x03
line.long 0x00 "RTCA0YEAR,RTC Year Count Buffer Register"
hexmask.long.byte 0x00 0.--7. 1. "RTCA0YEAR,Buffer register to read/write RTC Year Count register (RTCA0YEARC)"
group.long 0x30++0x03
line.long 0x00 "RTCA0TIME,RTC Time Set Register"
hexmask.long.byte 0x00 16.--23. 1. "RTCA0HOUR,See RTCA0HOUR register"
hexmask.long.byte 0x00 8.--15. 1. "RTCA0MIN,See RTCA0MIN register"
newline
hexmask.long.byte 0x00 0.--7. 1. "RTCA0SEC,See RTCA0SEC register"
group.long 0x34++0x03
line.long 0x00 "RTCA0CAL,RTC Calendar Set Register"
hexmask.long.byte 0x00 24.--31. 1. "RTCA0YEAR,See RTCA0YEAR register"
hexmask.long.byte 0x00 16.--23. 1. "RTCA0MONTH,See RTCA0MONTH register"
newline
hexmask.long.byte 0x00 8.--15. 1. "RTCA0DAY,See RTCA0DAY register"
hexmask.long.byte 0x00 0.--7. 1. "RTCA0WEEK,See RTCA0WEEK register"
group.long 0x3C++0x03
line.long 0x00 "RTCA0SCMP,RTC Sub Count Compare Register"
hexmask.long.tbyte 0x00 0.--21. 1. "RTCA0SCMP,Register that sets the compare value of RTCA0SUBC (sub-counter)"
group.long 0x40++0x03
line.long 0x00 "RTCA0ALM,RTC Alarm Min Set Register"
hexmask.long.byte 0x00 0.--6. 1. "RTCA0ALM,RTCA0ALM is a register that performs the minute setting for the alarm interrupt"
group.long 0x44++0x03
line.long 0x00 "RTCA0ALH,RTC Alarm Hour Set Register"
bitfld.long 0x00 0.--5. "RTCA0ALH,RTCA0ALH is a register that performs the hour setting for the alarm interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x48++0x03
line.long 0x00 "RTCA0ALW,RTC Alarm Week Set Register"
bitfld.long 0x00 6. "RTCA0ALW6,Alarm interrupt day of the week setting bit 6" "0: Disable alarm,1: Enable alarm"
bitfld.long 0x00 5. "RTCA0ALW5,Alarm interrupt day of the week setting bit 5" "0: Disable alarm,1: Enable alarm"
newline
bitfld.long 0x00 4. "RTCA0ALW4,Alarm interrupt day of the week setting bit 4" "0: Disable alarm,1: Enable alarm"
bitfld.long 0x00 3. "RTCA0ALW3,Alarm interrupt day of the week setting bit 3" "0: Disable alarm,1: Enable alarm"
newline
bitfld.long 0x00 2. "RTCA0ALW2,Alarm interrupt day of the week setting bit 2" "0: Disable alarm,1: Enable alarm"
bitfld.long 0x00 1. "RTCA0ALW1,Alarm interrupt day of the week setting bit 1" "0: Disable alarm,1: Enable alarm"
newline
bitfld.long 0x00 0. "RTCA0ALW0,Alarm interrupt day of the week setting bit 0" "0: Disable alarm,1: Enable alarm"
rgroup.long 0x4C++0x03
line.long 0x00 "RTCA0SECC,RTC Second Count Register"
hexmask.long.byte 0x00 0.--6. 1. "RTCA0SECC,Counts up the seconds"
rgroup.long 0x50++0x03
line.long 0x00 "RTCA0MINC,RTC Minute Count Register"
hexmask.long.byte 0x00 0.--6. 1. "RTCA0MINC,Counts up the minutes"
rgroup.long 0x54++0x03
line.long 0x00 "RTCA0HOURC,RTC Hour Count Register"
bitfld.long 0x00 0.--5. "RTCA0HOURC,Counts up the hours" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0x58++0x03
line.long 0x00 "RTCA0WEEKC,RTC Week Count Register"
bitfld.long 0x00 0.--2. "RTCA0WEEKC,Counts up the weeks" "0,1,2,3,4,5,6,7"
rgroup.long 0x5C++0x03
line.long 0x00 "RTCA0DAYC,RTC Day Count Register"
bitfld.long 0x00 0.--5. "RTCA0DAYC,Counts up the days" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0x60++0x03
line.long 0x00 "RTCA0MONC,RTC Month Count Register"
bitfld.long 0x00 0.--4. "RTCA0MONC,Counts up the months" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x64++0x03
line.long 0x00 "RTCA0YEARC,RTC Year Count Register"
hexmask.long.byte 0x00 0.--7. 1. "RTCA0YEARC,Counts up the years"
rgroup.long 0x68++0x03
line.long 0x00 "RTCA0TIMEC,RTC Time Count Register"
hexmask.long.byte 0x00 16.--23. 1. "RTCA0HOURC,See RTCA0HOURC register"
hexmask.long.byte 0x00 8.--15. 1. "RTCA0MINC,See RTCA0MINC register"
newline
hexmask.long.byte 0x00 0.--7. 1. "RTCA0SECC,See RTCA0SECC register"
rgroup.long 0x6C++0x03
line.long 0x00 "RTCA0CALC,RTC Calendar Count Register"
hexmask.long.byte 0x00 24.--31. 1. "RTCA0YEARC,See RTCA0YEARC register"
hexmask.long.byte 0x00 16.--23. 1. "RTCA0MONC,See RTCA0MONC register"
newline
hexmask.long.byte 0x00 8.--15. 1. "RTCA0DAYC,See RTCA0DAYC register"
hexmask.long.byte 0x00 0.--7. 1. "RTCA0WEEKC,See RTCA0WEEKC register"
tree.end
tree "RWP_NS (Register Write Protection for Non-safety Area)"
base ad:0x80281A10
group.long 0x00++0x03
line.long 0x00 "PRCRN,Non_Safety Area Protect Register"
hexmask.long.byte 0x00 8.--15. 1. "PRKEY,PRC Key Code"
bitfld.long 0x00 2. "PRC2,Protect 2" "0: Write disabled,1: Write enabled"
bitfld.long 0x00 1. "PRC1,Protect 1" "0: Write disabled,1: Write enabled"
bitfld.long 0x00 0. "PRC0,Protect 0" "0: Write disabled,1: Write enabled"
tree.end
tree "RWP_S (Register Write Protection for Safety Area)"
base ad:0x81281A00
group.long 0x00++0x03
line.long 0x00 "PRCRS,Safety Area Protect Register"
hexmask.long.byte 0x00 8.--15. 1. "PRKEY,PRC Key Code"
bitfld.long 0x00 3. "PRC3,Protect 3" "0: Write disabled,1: Write enabled"
bitfld.long 0x00 2. "PRC2,Protect 2" "0: Write disabled,1: Write enabled"
bitfld.long 0x00 1. "PRC1,Protect 1" "0: Write disabled,1: Write enabled"
bitfld.long 0x00 0. "PRC0,Protect 0" "0: Write disabled,1: Write enabled"
tree.end
tree "SCI (Serial Communication Interface)"
repeat 6. (list 0. 1. 2. 3. 4. 5.) (list ad:0x80001000 ad:0x80001400 ad:0x80001800 ad:0x80001C00 ad:0x80002000 ad:0x81001000)
tree "SCI$1"
base $2
rgroup.long 0x00++0x03
line.long 0x00 "RDR,Receive Data Register"
bitfld.long 0x00 28. "FER,Framing error flag" "0,1"
bitfld.long 0x00 27. "PER,Parity error flag" "0,1"
newline
bitfld.long 0x00 24. "ORER,Overrun Error flag" "0,1"
bitfld.long 0x00 12. "FFER,FIFO framing error flag" "0: There is no framing error in the data read..,1: There is framing error in the data read from.."
newline
bitfld.long 0x00 11. "FPER,FIFO parity error flag" "0: There is no parity error in the data read..,1: There is parity error in the data read from.."
bitfld.long 0x00 10. "DR,Receive data ready flag" "0,1"
newline
bitfld.long 0x00 9. "MPB,Multi-processor flag" "0: Data transmission cycles,1: ID transmission cycles"
hexmask.long.word 0x00 0.--8. 1. "RDAT,Serial receive data"
group.long 0x04++0x03
line.long 0x00 "TDR,Transmit Data Register"
bitfld.long 0x00 9. "MPBT,Multi-processor transfer bit flag" "0: Data transmission cycles,1: ID transmission cycles"
hexmask.long.word 0x00 0.--8. 1. "TDAT,Serial transmit data"
group.long 0x08++0x03
line.long 0x00 "CCR0,Common Control Register 0"
bitfld.long 0x00 24. "SSE,SSn# Pin Function Enable" "0: SSn# pin function is disabled,1: SSn# pin function is enabled"
bitfld.long 0x00 21. "TEIE,Transmit End Interrupt Enable" "0: TEI interrupt request is disabled,1: TEI interrupt request is enabled"
newline
bitfld.long 0x00 20. "TIE,Transmit Interrupt Enable" "0: TXI interrupt request is disabled,1: TXI interrupt request is enabled"
bitfld.long 0x00 16. "RIE,Receive Interrupt Enable" "0: RXI and ERI interrupt requests are disabled,1: RXI and ERI interrupt requests are enabled"
newline
bitfld.long 0x00 10. "IDSEL,ID frame select" "0: All data is to be compared,1: The data with RDR.MPB = 1 is to be compared"
bitfld.long 0x00 9. "DCME,Data Compare Match Enable" "0: Address match function is disabled,1: Address match function is enabled"
newline
bitfld.long 0x00 8. "MPIE,Multi-Processor Interrupt Enable" "0: Non-Multi-Processor reception,1: Multi-Processor reception"
bitfld.long 0x00 4. "TE,Transmit Enable" "0: Serial transmission is disabled,1: Serial transmission is enabled"
newline
bitfld.long 0x00 0. "RE,Receive Enable" "0: Serial reception is disabled,1: Serial reception is enabled"
group.long 0x0C++0x03
line.long 0x00 "CCR1,Common Control Register 1"
bitfld.long 0x00 28. "NFEN,Digital Noise Filter Function Enable" "0: Noise filter disabled,1: Noise filter enabled"
bitfld.long 0x00 24.--26. "NFCS,Noise Filter Clock Select" "0: The base clock signal divided by 1,1: The baud rate generator source clock divided..,2: The baud rate generator source clock divided..,3: The baud rate generator source clock divided..,4: The baud rate generator source clock divided..,?..."
newline
bitfld.long 0x00 20. "SHARPS,Half-duplex communication select" "0: The TXD pin and the RXD pin independent,1: Half-duplex communication using TXD pin"
bitfld.long 0x00 16. "SPLP,Loopback Control" "0: Normal mode,1: Loopback mode"
newline
bitfld.long 0x00 13. "RINV,RXD invert" "0: Received data from RXD is not inverted and..,1: Received data from RXD is inverted and input"
bitfld.long 0x00 12. "TINV,TXD invert" "0: Transmit data is not inverted and output to TXD,1: Transmit data is inverted and output to TXD"
newline
bitfld.long 0x00 9. "PM,Parity Mode" "0: Selects even parity,1: Selects odd parity"
bitfld.long 0x00 8. "PE,Parity Enable" "0: Parity bit addition is not performed when..,1: The parity bit is added when transmitting"
newline
bitfld.long 0x00 5. "SPB2IO,Serial port break I/O" "0: The value of SPB2DT bit is not output in TXD..,1: The value of SPB2DT bit is output in TXD pin"
bitfld.long 0x00 4. "SPB2DT,Serial port break data select" "0: Low level is output in TXD pin when TINV = 0,1: High level is output in TXD pin when TINV = 0"
newline
bitfld.long 0x00 1. "CTSPEN,CTS external pin Enable" "0: 1-pin mode CTS and RTS share 1 pin,1: 2-pin mode CTS and RTS have dedicated pins"
bitfld.long 0x00 0. "CTSE,CTS Enable" "0: CTS function is disabled (RTS output function..,1: CTS function is enabled"
group.long 0x10++0x03
line.long 0x00 "CCR2,Common Control Register 2"
hexmask.long.byte 0x00 24.--31. 1. "MDDR,Modulation Duty setting"
bitfld.long 0x00 20.--21. "CKS,Clock Select" "0: PCLKSCIn clock (n = 0),1: PCLKSCIn/4 clock (n = 1),2: PCLKSCIn/16 clock (n = 2),3: PCLKSCIn/64 clock (n = 3)"
newline
bitfld.long 0x00 16. "BRME," "0: Bit rate modulation function is disabled,1: Bit rate modulation function is enabled"
hexmask.long.byte 0x00 8.--15. 1. "BRR,Bit rate setting"
newline
bitfld.long 0x00 6. "ABCSE,Asynchronous Mode Extended Base Clock Select" "0: Clock cycles for 1-bit period are decided..,1: 6 base clock cycles for 1-bit period and.."
bitfld.long 0x00 5. "ABCS,Asynchronous Mode Base Clock Select" "0: Selects 16 base clock cycles for 1-bit period,1: Selects 8 base clock cycles for 1-bit period"
newline
bitfld.long 0x00 4. "BGDM,Baud Rate Generator Double-Speed Mode Select" "0: Baud rate generator outputs the clock with..,1: Baud rate generator outputs the clock with.."
bitfld.long 0x00 0.--2. "BCP,Base Clock Pulse" "0: 93 clock cycles (S = 93),1: 128 clock cycles (S = 128),2: 186 clock cycles (S = 186),3: 512 clock cycles (S = 512),4: 32 clock cycles (S = 32) (Initial value),5: 64 clock cycles (S = 64),6: 372 clock cycles (S = 372),7: 256 clock cycles (S = 256)"
group.long 0x14++0x03
line.long 0x00 "CCR3,Common Control Register 3"
bitfld.long 0x00 29. "BLK,Block Transfer Mode" "0: Non-block transfer mode operation,1: Block transfer mode operation"
bitfld.long 0x00 28. "GM,GSM Mode" "0: Non-GSM mode operation,1: GSM mode operation"
newline
bitfld.long 0x00 24.--25. "CKE,Clock enable" "0,1,2,3"
bitfld.long 0x00 21. "DEN,Driver enable" "0: RS-485 Driver control function disable,1: RS-485 Driver control function enable"
newline
bitfld.long 0x00 20. "FM,FIFO Mode select" "0: Non-FIFO mode (TDR and RDR registers are..,1: FIFO mode (TDR and RDR registers are FIFO)"
bitfld.long 0x00 19. "MP,Multi-Processor Mode" "0: Multi-processor communications function is..,1: Multi-processor communications function is.."
newline
bitfld.long 0x00 16.--18. "MOD,Communication mode select" "0: Asynchronous mode (Multi-processor mode),1: Smart card interface mode,2: Clock synchronous mode,3: Simple SPI mode,4: Simple I2C mode,?..."
bitfld.long 0x00 15. "RXDESEL,Asynchronous Start Bit Edge Detection Select" "0: The low level on the RXDn pin is detected as..,1: A falling edge on the RXDn pin is detected as.."
newline
bitfld.long 0x00 14. "STP,Stop Bit Length" "0: 1 stop bit,1: 2 stop bits"
bitfld.long 0x00 13. "SINV,Transmitted/Received Data Invert" "0: TDR contents are transmitted to TSR as they are,1: TDR contents are inverted before being.."
newline
bitfld.long 0x00 12. "LSBF,LSB First select" "0: MSB first,1: LSB first"
bitfld.long 0x00 8.--9. "CHR,Character Length" "0: Transmit/receive in 9-bit data length,1: Transmit/receive in 9-bit data length,2: Transmit/receive in 8-bit data length..,3: Transmit/receive in 7-bit data length"
newline
bitfld.long 0x00 7. "BPEN,Synchronizer bypass enable" "0: Synchronizer circuit is not bypassed,1: Synchronizer circuit is bypassed"
bitfld.long 0x00 1. "CPOL,Clock Polarity Select" "0: SCKn in idle state is 0,1: SCKn in idle state is 1"
newline
bitfld.long 0x00 0. "CPHA,Clock Phase Select" "0: Data is sampled at an odd edge and changes at..,1: Data changes at an odd edge and is sampled at.."
group.long 0x18++0x03
line.long 0x00 "CCR4,Common Control Register 4"
bitfld.long 0x00 31. "AET,Adjustment edge for transmit timing" "0: Adjust the rising edge timing when CCR1.TINV..,1: Adjust the falling edge timing when CCR1.TINV.."
bitfld.long 0x00 28.--30. "ATT,Adjustment value for Transmit timing" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 27. "AJD,Adjustment Direction for receive sampling timing" "0: The sampling timing is adjusted backward to..,1: The sampling timing is adjusted forward to.."
bitfld.long 0x00 24.--26. "AST,Adjustment value for receive Sampling Timing" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 17. "ATEN,Adjust transmit timing enable" "0: Adjust transmit timing disable,1: Adjust transmit timing enable"
bitfld.long 0x00 16. "ASEN,Adjust receive sampling timing enable" "0: Adjust sampling timing disable,1: Adjust sampling timing enable"
newline
hexmask.long.word 0x00 0.--8. 1. "CMPD,Compare Match Data"
group.long 0x20++0x03
line.long 0x00 "ICR,Simple I2C Control Register"
bitfld.long 0x00 22.--23. "IICSCLS," "0: Serial clock output,1: Generate a start restart or stop condition,2: Output the low level on the SCLn pin,3: Place the SCLn pin in the high-impedance state"
bitfld.long 0x00 20.--21. "IICSDAS," "0: Serial data output,1: Generate a start restart or stop condition,2: Output the low level on the SDAn pin,3: Place the SDAn pin in the high-impedance state"
newline
bitfld.long 0x00 18. "IICSTPREQ," "0: A stop condition is not generated,1: A stop condition is generated"
bitfld.long 0x00 17. "IICRSTAREQ," "0: A restart condition is not generated,1: A restart condition is generated"
newline
bitfld.long 0x00 16. "IICSTAREQ," "0: A start condition is not generated,1: A start condition is generated"
bitfld.long 0x00 13. "IICACKT," "0: ACK transmission,1: NACK transmission and reception of ACK/NACK"
newline
bitfld.long 0x00 9. "IICCSC," "0: No synchronization with the clock signal,1: Synchronization with the clock signal"
bitfld.long 0x00 8. "IICINTM," "0: Use ACK/NACK interrupts,1: Use reception and transmission interrupts"
newline
bitfld.long 0x00 0.--4. "IICDL,SDA Delay Output Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x24++0x03
line.long 0x00 "FCR,FIFO Control Register"
bitfld.long 0x00 24.--28. "RSTRG,RTS# Output Active Trigger Number Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 23. "RFRST,Receive FIFO Data Register Reset" "0: It is invalid,1: The number of data stored in receive FIFO.."
newline
bitfld.long 0x00 16.--20. "RTRG,Receive FIFO data trigger number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 15. "TFRST,Transmit FIFO Data Register Reset" "0: It is invalid,1: The number of data stored in transmit FIFO.."
newline
bitfld.long 0x00 8.--12. "TTRG,Transmit FIFO data trigger number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0. "DRES,Receive data ready error select" "0: reception data full interrupt (RXI),1: receive error interrupt (ERI)"
group.long 0x30++0x03
line.long 0x00 "DCR,Driver Control Register"
bitfld.long 0x00 16.--20. "DENGT,Driver negate time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--12. "DEAST,Driver Assertion Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0. "DEPOL,Driver effective polarity select" "0: The DE signal is active high,1: The DE signal is active low"
rgroup.long 0x48++0x03
line.long 0x00 "CSR,Common Status Register"
bitfld.long 0x00 31. "RDRF," "0: No received data is in RDR register (Non-FIFO..,1: Received data is in RDR register (Non-FIFO.."
bitfld.long 0x00 30. "TEND," "0: A character is being transmitted or standing..,1: Character transfer has been completed"
newline
bitfld.long 0x00 29. "TDRE,Transmit Data Empty Flag" "0: Transmit data is in TDR register (Non-FIFO..,1: No transmit data is in TDR register (Non-FIFO.."
bitfld.long 0x00 28. "FER," "0: No framing error occurred (Non-FIFO mode) No..,1: A framing error has occurred (Non-FIFO mode).."
newline
bitfld.long 0x00 27. "PER," "0: No parity error occurred (Non-FIFO mode) No..,1: A parity error has occurred (Non-FIFO mode).."
bitfld.long 0x00 26. "MFF,Mode Fault Error Flag" "0: No mode fault error,1: Mode fault error"
newline
bitfld.long 0x00 24. "ORER," "0: No overrun error occurred,1: An overrun error has occurred"
bitfld.long 0x00 18. "DFER,Data Compare Match Framing Error Flag" "0: No framing error occurred at address match..,1: A framing error has occurred at address match.."
newline
bitfld.long 0x00 17. "DPER,Data Compare Match Parity Error Flag" "0: No parity error occurred at address match..,1: A parity error has occurred at address match.."
bitfld.long 0x00 16. "DCMF,Data Compare Match Flag" "0: No matched,1: Matched"
newline
bitfld.long 0x00 15. "RXDMON,Serial input data monitor" "0: RXD pin is the Low level when CCR1.RINV = 0,1: RXD pin is the High level when CCR1.RINV = 0"
bitfld.long 0x00 4. "ERS,Error Signal Status Flag" "0: Error signal Low not responded,1: Error signal Low responded"
rgroup.long 0x4C++0x03
line.long 0x00 "ISR,Simple I2C Status Register"
bitfld.long 0x00 3. "IICSTIF,Issuing of Start Restart or Stop Condition Completed Flag" "0: There are no requests for generating..,1: A start restart or stop condition is.."
bitfld.long 0x00 0. "IICACKR,ACK Reception Data Flag" "0: ACK received,1: NACK received"
rgroup.long 0x50++0x03
line.long 0x00 "FRSR,FIFO Receive Status Register"
bitfld.long 0x00 24.--29. "FNUM,Framing Error Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--21. "PNUM,Parity Error Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 8.--13. "R,Receive FIFO Data Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0. "DR," "0: Receiving is in progress or no received data..,1: The following receive data does not come for.."
rgroup.long 0x54++0x03
line.long 0x00 "FTSR,FIFO Transmit Status Register"
bitfld.long 0x00 0.--5. "T,Transmit FIFO Data Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
wgroup.long 0x68++0x03
line.long 0x00 "CFCLR,Common Flag Clear Register"
bitfld.long 0x00 31. "RDRFC," "0: No effect,1: Clear the CSR.RDRF bit"
bitfld.long 0x00 29. "TDREC," "0: No effect,1: Clear the CSR.TDRE bit"
newline
bitfld.long 0x00 28. "FERC," "0: No effect,1: Clear the CSR.FER bit"
bitfld.long 0x00 27. "PERC," "0: No effect,1: Clear the CSR.PER bit"
newline
bitfld.long 0x00 26. "MFFC," "0: No effect,1: Clear the CSR.MFF bit"
bitfld.long 0x00 24. "ORERC," "0: No effect,1: Clear the CSR.ORER bit"
newline
bitfld.long 0x00 18. "DFERC," "0: No effect,1: Clear the CSR.DFER bit"
bitfld.long 0x00 17. "DPERC," "0: No effect,1: Clear the CSR.DPER bit"
newline
bitfld.long 0x00 16. "DCMFC," "0: No effect,1: Clear the CSR.DCMF bit"
bitfld.long 0x00 4. "ERSC," "0: No effect,1: Clear the CSR.ERS bit"
wgroup.long 0x6C++0x03
line.long 0x00 "ICFCLR,Simple I2C Flag Clear Register"
bitfld.long 0x00 3. "IICSTIFC," "0: No effect,1: Clear the ISR.IICSTIF bit"
wgroup.long 0x70++0x03
line.long 0x00 "FFCLR,FIFO Flag Clear Register"
bitfld.long 0x00 0. "DRC," "0: No effect,1: Clear the FRSR.DR bit"
tree.end
repeat.end
tree.end
tree "SHOSTIF (Serial Host Interface)"
base ad:0x80241000
group.long 0x00++0x03
line.long 0x00 "CTRLR0,Control Register 0"
bitfld.long 0x00 9. "SCPOL,Serial Clock Polarity" "0: Inactive state of the serial clock is low,1: Inactive state of the serial clock is high"
bitfld.long 0x00 8. "SCPH,Serial Clock Phase" "0: Serial clock toggles in the middle of the..,1: Serial clock toggles at the start of the.."
group.long 0x08++0x03
line.long 0x00 "ENR,Enable Register"
bitfld.long 0x00 0. "ENABLE,SHOSTIF Enable" "0: Disables SHOSTIF,1: Enables SHOSTIF"
group.long 0x14++0x03
line.long 0x00 "RXFBTR,Receive FIFO Burst Threshold Register"
bitfld.long 0x00 0.--5. "RXFBTL,Receive FIFO Burst Threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x18++0x03
line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register"
bitfld.long 0x00 0.--5. "TFT,Transmit FIFO Threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x1C++0x03
line.long 0x00 "RXFTLR,Receive FIFO Threshold Level Register"
bitfld.long 0x00 0.--5. "RFT,Receive FIFO Threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0x28++0x03
line.long 0x00 "SR,Status Register"
bitfld.long 0x00 0. "BUSY,Busy Flag" "0: SHOSTIF is idle or disabled,1: SHOSTIF is actively transferring data"
group.long 0x2C++0x03
line.long 0x00 "IMR,Interrupt Mask Register"
bitfld.long 0x00 9. "SPIMEM,SPI Master Error Interrupt Mask" "0: spime_intr interrupt is masked,1: spime_intr interrupt is not masked"
bitfld.long 0x00 8. "AHBEM,AHB Error Interrupt Mask" "0: ahbe_intr interrupt is masked,1: ahbe_intr interrupt is not masked"
newline
bitfld.long 0x00 7. "TXUIM,Transmit FIFO Underflow Mask" "0: txu_intr interrupt is masked,1: txu_intr interrupt is not masked"
bitfld.long 0x00 4. "RXFIM,Receive FIFO Full Interrupt Mask" "0: rxf_intr interrupt is masked,1: rxf_intr interrupt is not masked"
newline
bitfld.long 0x00 3. "RXOIM,Receive FIFO Overflow Interrupt Mask" "0: rxo_intr interrupt is masked,1: rxo_intr interrupt is not masked"
bitfld.long 0x00 0. "TXEIM,Transmit FIFO Empty Interrupt Mask" "0: txe_intr interrupt is masked,1: txe_intr interrupt is not masked"
rgroup.long 0x30++0x03
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 9. "SPIMES,SPI Master Error Interrupt Status" "0: spime_intr interrupt is not active after..,1: spime_intr interrupt is active after masking"
bitfld.long 0x00 8. "AHBES,AHB Error Interrupt Status" "0: ahbe_intr interrupt is not active after masking,1: ahbe_intr interrupt is active after masking"
newline
bitfld.long 0x00 7. "TXUIS,Transmit FIFO Underflow Status" "0: txu_intr interrupt is not active after masking,1: txu_intr interrupt is active after masking"
bitfld.long 0x00 4. "RXFIS,Receive FIFO Full Interrupt Status" "0: rxf_intr interrupt is not active after masking,1: rxf_intr interrupt is active after masking"
newline
bitfld.long 0x00 3. "RXOIS,Receive FIFO Overflow Interrupt Status" "0: rxo_intr interrupt is not active after masking,1: rxo_intr interrupt is active after masking"
bitfld.long 0x00 0. "TXEIS,Transmit FIFO Empty Interrupt Status" "0: txe_intr interrupt is not active after masking,1: txe_intr interrupt is active after masking"
rgroup.long 0x34++0x03
line.long 0x00 "RISR,Raw Interrupt Status Register"
bitfld.long 0x00 9. "SPIMER,SPI Master Error Raw Interrupt Status" "0: spime_intr interrupt is not active prior to..,1: spime_intr interrupt is active prior to masking"
bitfld.long 0x00 8. "AHBER,AHB Error Raw Interrupt Status" "0: ahbe_intr interrupt is not active prior to..,1: ahbe_intr interrupt is active prior to masking"
newline
bitfld.long 0x00 7. "TXUIR,Transmit FIFO Underflow Raw Interrupt Status" "0: txu_intr interrupt is not active prior to..,1: txu_intr interrupt is active prior to masking"
bitfld.long 0x00 4. "RXFIR,Receive FIFO Full Raw Interrupt Status" "0: rxf_intr interrupt is not active prior to..,1: rxf_intr interrupt is active prior to masking"
newline
bitfld.long 0x00 3. "RXOIR,Receive FIFO Overflow Raw Interrupt Status" "0: rxo_intr interrupt is not active prior to..,1: rxo_intr interrupt is active prior to masking"
bitfld.long 0x00 0. "TXEIR,Transmit FIFO Empty Raw Interrupt Status" "0: txe_intr interrupt is not active prior to..,1: txe_intr interrupt is active prior to masking"
rgroup.long 0x38++0x03
line.long 0x00 "TXUICR,Transmit FIFO Underflow Interrupt Clear Register"
bitfld.long 0x00 0. "TXUICR,Clear Transmit FIFO Underflow Interrupt" "0,1"
rgroup.long 0x3C++0x03
line.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register"
bitfld.long 0x00 0. "RXOICR,Clear Receive FIFO Overflow Interrupt" "0,1"
rgroup.long 0x40++0x03
line.long 0x00 "SPIMECR,SPI Master Interrupt Clear Register"
bitfld.long 0x00 0. "SPIMECR,Clear SPI Master Error interrupt" "0,1"
rgroup.long 0x44++0x03
line.long 0x00 "AHBECR,AHB Error Clear Register"
bitfld.long 0x00 0. "AHBECR,Clear AHB Error Interrupt" "0,1"
rgroup.long 0x48++0x03
line.long 0x00 "ICR,Interrupt Clear Register"
bitfld.long 0x00 0. "ICR,Clear Interrupts" "0,1"
tree.end
tree "SHOSTIF_CFG (Serial Host Interface Configuration)"
base ad:0x81281920
group.long 0x00++0x03
line.long 0x00 "SHCFG,SHOSTIF Configuration Register"
bitfld.long 0x00 24.--29. "INTMASKE,Interrupt Mask Enable for External Interrupt (HSPI_INT# signal)" "0: No masked,1: Masked,?..."
bitfld.long 0x00 16.--21. "INTMASKI,Interrupt Mask Enable for Internal Interrupt (SHOST_INT)" "0: No masked,1: Masked,?..."
rbitfld.long 0x00 4. "SLEEP,SHOSTIF Enable Flag Monitor" "0: Not safe to stop the internal clock,1: Safe to stop the internal clock"
bitfld.long 0x00 3. "ADDRESSING,Addressing Mode" "0: 32-bit,1: 8-bit"
newline
bitfld.long 0x00 2. "BYTESWAP,Byte Swap Mode" "0: No byte swap,1: Byte swap"
bitfld.long 0x00 0.--1. "SPIMODE,SPI Frame Format Select" "0: Standard SPI mode,1: SPI Dual mode,2: SPI Quad mode,3: SPI Octal mode"
tree.end
tree "SPI (Serial Peripheral Interface)"
repeat 4. (list 0. 1. 2. 3.) (list ad:0x80003000 ad:0x80003400 ad:0x80003800 ad:0x81002000)
tree "SPI$1"
base $2
group.long 0x00++0x03
line.long 0x00 "SPDR,SPI Data Register"
hexmask.long 0x00 0.--31. 1. "SPD,The SPI data register (SPDR) is used to store SPIs transmit data and receive data"
group.word 0x00++0x01
line.word 0x00 "SPDR_HA,SPI Data Register"
group.byte 0x00++0x00
line.byte 0x00 "SPDR_BY,SPI Data Register"
group.byte 0x04++0x00
line.byte 0x00 "SPCKD,SPI Clock Delay Register"
bitfld.byte 0x00 0.--2. "SCKDL,RSPCK Delay Setting" "0: 1 RSPCK,1: 2 RSPCK,2: 3 RSPCK,3: 4 RSPCK,4: 5 RSPCK,5: 6 RSPCK,6: 7 RSPCK,7: 8 RSPCK"
group.byte 0x05++0x00
line.byte 0x00 "SSLND,SPI Slave Select Negation Delay Register"
bitfld.byte 0x00 0.--2. "SLNDL,SSL Negation Delay Bits" "0: 1 RSPCK [Master mode] 1 PCLKSPIn + (2~3..,1: 2 RSPCK [Master mode] 2 PCLKSPIn + (2~3..,2: 3 RSPCK [Master mode] 3 PCLKSPIn + (2~3..,3: 4 RSPCK [Master mode] 4 PCLKSPIn + (2~3..,4: 5 RSPCK [Master mode] 5 PCLKSPIn + (2~3..,5: 6 RSPCK [Master mode] 6 PCLKSPIn + (2~3..,6: 7 RSPCK [Master mode] 7 PCLKSPIn + (2~3..,7: 8 RSPCK [Master mode] 8 PCLKSPIn + (2~3.."
group.byte 0x06++0x00
line.byte 0x00 "SPND,SPI Next-Access Delay Register"
bitfld.byte 0x00 0.--2. "SPNDL,SPI Next-Access Delay Bits" "0: 1 RSPCK + 5 PCLKSPIn,1: 2 RSPCK + 5 PCLKSPIn,2: 3 RSPCK + 5 PCLKSPIn,3: 4 RSPCK + 5 PCLKSPIn,4: 5 RSPCK + 5 PCLKSPIn,5: 6 RSPCK+ 5 PCLKSPIn,6: 7 RSPCK + 5 PCLKSPIn,7: 8 RSPCK + 5 PCLKSPIn"
group.byte 0x07++0x00
line.byte 0x00 "MRCKD,SPI ClocK Digital control Register for Master Receive"
bitfld.byte 0x00 0.--2. "ARST,Receive Sampling Timing Adjustment Bits" "0: 0 PCLKSPIn delay,1: 1 PCLKSPIn delay,2: 2 PCLKSPIn delay,3: 3 PCLKSPIn delay,4: 4 PCLKSPIn delay,5: 5 PCLKSPIn delay,6: 6 PCLKSPIn delay,7: 7 PCLKSPIn delay"
group.long 0x08++0x03
line.long 0x00 "SPCR,SPI Control Register"
bitfld.long 0x00 31. "BPEN,Synchronization Circuit Bypass Enable" "0: Non-Bypass,1: Bypass"
bitfld.long 0x00 30. "MSTR,SPI Master/Slave Mode Select" "0: Slave mode,1: Master mode"
newline
bitfld.long 0x00 28.--29. "TXMD,Communication Mode Select" "0: Transmit-Receive,1: Transmit only,2: Receive only,3: Receive only"
bitfld.long 0x00 25. "SPFRF,SPI Frame Format Select" "0: Motorola-SPI,1: TI-SSP"
newline
bitfld.long 0x00 24. "SPMS,SPI Function Enable" "0: SPI operation (4-wire),1: Clock synchronous operation (3-wire)"
bitfld.long 0x00 21. "CENDIE,SPI Communication End Interrupt Enable" "0: Communication end interrupt request is disabled,1: Communication end interrupt request is enabled"
newline
bitfld.long 0x00 20. "SPTIE,SPI Transmit Buffer Empty Interrupt Enable" "0: SPI transmit buffer empty interrupt request..,1: SPI transmit buffer empty interrupt request.."
bitfld.long 0x00 19. "SPDRES,SPI Receive Data Ready Error Select" "0: Receive data full interrupt,1: Error interrupt"
newline
bitfld.long 0x00 18. "SPIIE,SPI Idle Interrupt Enable" "0: Idle interrupt request is disabled,1: Idle interrupt request is enabled"
bitfld.long 0x00 17. "SPRIE,SPI Receive Buffer Full Interrupt Enable" "0: SPI receive buffer full interrupt request is..,1: SPI receive buffer full interrupt request is.."
newline
bitfld.long 0x00 16. "SPEIE,SPI Error Interrupt Enable" "0: SPI error interrupt request is disabled,1: SPI error interrupt request is enabled"
bitfld.long 0x00 14. "MODFEN,Mode Fault Error Detection Enable" "0: Mode fault error detection is disabled,1: Mode fault error detection is enabled"
newline
bitfld.long 0x00 13. "BFDS,Between Burst Transfer Frames Delay Select" "0: Delay (RSPCK delay SSL negation delay and..,1: Delay between frames is not inserted in burst.."
bitfld.long 0x00 12. "SCKASE,RSPCK Auto-Stop Function Enable" "0: RSPCK auto-stop function is disabled,1: RSPCK auto-stop function is enabled"
newline
bitfld.long 0x00 11. "PTE,Parity Self-Diagnosis Enable" "0: Parity circuit self-diagnosis function is..,1: Parity circuit self-diagnosis function is.."
bitfld.long 0x00 9. "SPOE,Parity Mode" "0: Even parity is used for transmission and..,1: Odd parity is used for transmission and.."
newline
bitfld.long 0x00 8. "SPPE,Parity Enable" "0: A parity bit is not added to transmit data,1: A parity bit is added to transmit data"
bitfld.long 0x00 7. "SPSCKSEL,SPI Master Receive Clock Select" "0: MRIOCLK (Adjust with Analog Delay..,1: MRCLK (Adjust with Digital Delay (MRCKD.ARST))"
newline
bitfld.long 0x00 0. "SPE,SPI Function Enable" "0: SPI function is disabled,1: SPI function is enabled"
group.byte 0x0C++0x00
line.byte 0x00 "SPCRRM,SPI Control Register for Master Receive only"
bitfld.byte 0x00 7. "RMSTTG,Reading value is always 0" "0,1"
bitfld.byte 0x00 6. "RMEDTG,Reading value is always 0" "0,1"
newline
bitfld.byte 0x00 0.--4. "RMFM,Frame processing count setting in Master Receive only" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.byte 0x0D++0x00
line.byte 0x00 "SPDRCR,SPI Control Register for Received Data Ready Detection"
hexmask.byte 0x00 0.--7. 1. "SPDRC,"
group.byte 0x0E++0x00
line.byte 0x00 "SPPCR,SPI Pin Control Register"
bitfld.byte 0x00 5. "MOIFE,MOSI Idle Value Fixing Enable" "0: The MOSI output value is the last data of..,1: The MOSI output value is the set MOIFV bit.."
bitfld.byte 0x00 4. "MOIFV,MOSI Idle Fixed Value" "0: The fixed value of MOSI idle = 0,1: The fixed value of MOSI idle = 1"
newline
bitfld.byte 0x00 2. "SPOM,SPI Output Pin Mode" "0: CMOS output,1: Open-drain output"
bitfld.byte 0x00 1. "SPLP2,SPI Loopback 2" "0: Normal mode,1: Loopback mode (data is not inverted for.."
newline
bitfld.byte 0x00 0. "SPLP,SPI Loopback" "0: Normal mode,1: Loopback mode (data is inverted for.."
group.byte 0x0F++0x00
line.byte 0x00 "SPCR2,SPI Control Register 2"
bitfld.byte 0x00 0.--2. "SPSCKDL,SPI Master Receive Clock Analog Delay" "0: No delay,1: 1.1 ns (max),2: 2.2 ns (max),3: 3.3 ns (max),4: 4.4 ns (max),5: 5.5 ns (max),6: 6.6 ns (max),7: 7.7 ns (max)"
group.byte 0x10++0x00
line.byte 0x00 "SSLP,SPI Slave Select Polarity Register"
bitfld.byte 0x00 3. "SSL3P,SSL3 Signal Polarity Setting" "0: In the Motorola-SPI case the SSL3 signal is..,1: In the Motorola-SPI case the SSL3 signal is.."
bitfld.byte 0x00 2. "SSL2P,SSL2 Signal Polarity Setting" "0: In the Motorola-SPI case the SSL2 signal is..,1: In the Motorola-SPI case the SSL2 signal is.."
newline
bitfld.byte 0x00 1. "SSL1P,SSL1 Signal Polarity Setting" "0: In the Motorola-SPI case the SSL1 signal is..,1: In the Motorola-SPI case the SSL1 signal is.."
bitfld.byte 0x00 0. "SSL0P,SSL0 Signal Polarity Setting" "0: In the Motorola-SPI case the SSL0 signal is..,1: In the Motorola-SPI case the SSL0 signal is.."
group.byte 0x11++0x00
line.byte 0x00 "SPBR,SPI Bit Rate Register"
hexmask.byte 0x00 0.--7. 1. "SPR,The SPBR register is used to set the bit rate in master mode"
group.byte 0x13++0x00
line.byte 0x00 "SPSCR,SPI Sequence Control Register"
bitfld.byte 0x00 0.--2. "SPSLN,SPI Sequence Length Specification" "0: Sequence Length = 1 (0?0????),1: Sequence Length = 2 (0?1?0????),2: Sequence Length = 3 (0?1?2?0????),3: Sequence Length = 4 (0?1?2?3?0????),4: Sequence Length = 5 (0?1?2?3?4?0????),5: Sequence Length = 6 (0?1?2?3?4?5?0????),6: Sequence Length = 7 (0?1?2?3?4?5?6?0????),7: Sequence Length = 8 (0?1?2?3?4?5?6?7?0????)"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
group.long ($2+0x14)++0x03
line.long 0x00 "SPCMD$1,SPI Command Register"
bitfld.long 0x00 24.--25. "SSLA,SSL Signal Assertion" "0: SSL0,1: SSL1,2: SSL2,3: SSL3"
bitfld.long 0x00 16.--20. "SPB,SPI Data Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SCKDEN,RSPCK Delay Setting Enable" "0: RSPCK delay is 1 RSPCK,1: RSPCK delay is the set value of the RSPCK.."
bitfld.long 0x00 14. "SLNDEN,SSL Negation Delay Setting Enable" "0: [Master] SSL negation delay is 1 RSPCK,1: SSL negation delay is the set value of the.."
newline
bitfld.long 0x00 13. "SPNDEN,SPI Next-Access Delay Enable" "0: Next-access delay is 1 RSPCK + 5 PCLKSPIn,1: Next-access delay is the set value of the SPI.."
bitfld.long 0x00 12. "LSBF,SPI LSB First" "0: MSB first,1: LSB first"
newline
bitfld.long 0x00 7. "SSLKP,SSL Signal Level Hold" "0: All SSL signals are negated at the end of..,1: SSL signal level is held after the transfer.."
bitfld.long 0x00 2.--3. "BRDV,Bit Rate Division" "0: The base bit rate is selected,1: Two-divided base bit rate is selected,2: Four-divided base bit rate is selected,3: Eight-divided base bit rate is selected"
newline
bitfld.long 0x00 1. "CPOL,RSPCK Polarity" "0: RSPCK in idle state is 0,1: RSPCK in idle state is 1"
bitfld.long 0x00 0. "CPHA,RSPCK Phase" "0: Data is sampled at an odd edge and changes at..,1: Data changes at an odd edge and is sampled at.."
repeat.end
group.word 0x40++0x01
line.word 0x00 "SPDCR,SPI Data Control Register"
bitfld.word 0x00 8.--9. "SPFC,Frame Count" "0: 1 frame,1: 2 frames,2: 3 frames,3: 4 frames"
bitfld.word 0x00 4. "SINV,Serial data invert" "0: Not invert serial data,1: Invert serial data"
newline
bitfld.word 0x00 3. "SPRDTD,SPI Receive Data or Transmit Data Selection" "0: The SPDR reads the receive buffer,1: The SPDR reads the transmit buffer"
bitfld.word 0x00 1.--2. "SLSEL,SSL Pin Output Select" "0,1,2,3"
newline
bitfld.word 0x00 0. "BYSW,Byte Swap Operating Mode Select" "0: Byte swap is disabled,1: Byte swap is enabled"
group.word 0x44++0x01
line.word 0x00 "SPDCR2,SPI Data Control Register 2"
bitfld.word 0x00 8.--9. "TTRG,Transmission FIFO threshold setting" "0: Threshold 0,1: Threshold 1,2: Threshold 2,3: Threshold 3"
bitfld.word 0x00 0.--1. "RTRG,Receive FIFO threshold setting" "0: Threshold 0,1: Threshold 1,2: Threshold 2,3: Threshold 3"
rgroup.byte 0x51++0x00
line.byte 0x00 "SPSSR,SPI Sequence Status Register"
bitfld.byte 0x00 4.--6. "SPECM,SPI Error Command" "0: SPCMD0,1: SPCMD1,2: SPCMD2,3: SPCMD3,4: SPCMD4,5: SPCMD5,6: SPCMD6,7: SPCMD7"
bitfld.byte 0x00 0.--2. "SPCP,SPI Command Pointer" "0: SPCMD0,1: SPCMD1,2: SPCMD2,3: SPCMD3,4: SPCMD4,5: SPCMD5,6: SPCMD6,7: SPCMD7"
rgroup.word 0x52++0x01
line.word 0x00 "SPSR,SPI Status Register"
bitfld.word 0x00 15. "SPRF,SPI Receive Buffer Full Flag" "0: The number of data stored in the receive FIFO..,1: The number of data stored in the receive FIFO.."
bitfld.word 0x00 14. "CENDF,Communication End Flag" "0: The SPI is not communicating or communicating,1: The SPI communication completed"
newline
bitfld.word 0x00 13. "SPTEF,SPI Transmit Buffer Empty Flag" "0: The number of empty stages in the transmit..,1: The number of empty stages in the transmit.."
bitfld.word 0x00 12. "UDRF,Underrun Error Flag" "0: Mode fault error occurred (MODF = 1),1: Underrun error occurred (MODF = 1)"
newline
bitfld.word 0x00 11. "PERF,Parity Error Flag" "0: No parity error is present,1: A parity error is present"
bitfld.word 0x00 10. "MODF,Mode Fault Error Flag" "0: Neither mode fault error nor underrun error..,1: A mode fault error or underrun error is present"
newline
bitfld.word 0x00 9. "IDLNF,SPI Idle Flag" "0: The SPI is in the idle state,1: The SPI is in the transfer state"
bitfld.word 0x00 8. "OVRF,Overrun Error Flag" "0: No overrun error is present,1: An overrun error is present"
newline
bitfld.word 0x00 7. "SPDRF,SPI Receive Data Ready Flag" "0: Receive data ready not detected,1: Receive data ready detected"
rgroup.byte 0x58++0x00
line.byte 0x00 "SPTFSR,SPI Transfer FIFO Status Register"
bitfld.byte 0x00 0.--2. "TFDN,Transmit FIFO data empty stage number" "0: Number of empty stages 0,1: Number of empty stages 1,2: Number of empty stages 2,3: Number of empty stages 3,4: Number of empty stages 4,?..."
rgroup.byte 0x5C++0x00
line.byte 0x00 "SPRFSR,SPI Receive FIFO Status Register"
bitfld.byte 0x00 0.--2. "RFDN,Receive FIFO data store stage number" "0: Number of store stages 0,1: Number of store stages 1,2: Number of store stages 2,3: Number of store stages 3,4: Number of store stages 4,?..."
rgroup.long 0x60++0x03
line.long 0x00 "SPPSR,SPI Poling Register"
bitfld.long 0x00 0. "SPEPS,SPI Polling Status" "0: SPCR.SPE is 0,1: SPCR SPE is 1"
group.word 0x6A++0x01
line.word 0x00 "SPSRC,SPI Status Clear Register"
bitfld.word 0x00 15. "SPRFC,SPI Receive Buffer Full Flag Clear" "0,1"
bitfld.word 0x00 14. "CENDFC,Communication End Flag Clear" "0,1"
newline
bitfld.word 0x00 13. "SPTEFC,SPI Transmit Buffer Empty Flag Clear" "0,1"
bitfld.word 0x00 12. "UDRFC,Underrun Error Flag Clear" "0,1"
newline
bitfld.word 0x00 11. "PERFC,Parity Error Flag Clear" "0,1"
bitfld.word 0x00 10. "MODFC,Mode Fault Error Flag Clear" "0,1"
newline
bitfld.word 0x00 8. "OVRFC,Overrun Error Flag Clear" "0,1"
bitfld.word 0x00 7. "SPDRFC,SPI Receive Data Ready Flag Clear" "0,1"
wgroup.byte 0x6C++0x00
line.byte 0x00 "SPFCR,SPI FIFO Clear Register"
bitfld.byte 0x00 0. "SPFRST,SPI FIFO clear" "0,1"
tree.end
repeat.end
tree.end
tree "SYSC_NS (System Control for Non-safety region)"
base ad:0x80280000
group.long 0x00++0x03
line.long 0x00 "SCKCR,System Clock Control Register"
bitfld.long 0x00 31. "SCI4ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SCI4" "0: 75.0 MHz,1: 96.0 MHz"
bitfld.long 0x00 30. "SCI3ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SCI3" "0: 75.0 MHz,1: 96.0 MHz"
newline
bitfld.long 0x00 29. "SCI2ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SCI2" "0: 75.0 MHz,1: 96.0 MHz"
bitfld.long 0x00 28. "SCI1ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SCI1" "0: 75.0 MHz,1: 96.0 MHz"
newline
bitfld.long 0x00 27. "SCI0ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SCI0" "0: 75.0 MHz,1: 96.0 MHz"
bitfld.long 0x00 26. "SPI2ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SPI2" "0: 75.0 MHz,1: 96.0 MHz"
newline
bitfld.long 0x00 25. "SPI1ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SPI1" "0: 75.0 MHz,1: 96.0 MHz"
bitfld.long 0x00 24. "SPI0ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SPI0" "0: 75.0 MHz,1: 96.0 MHz"
newline
bitfld.long 0x00 22. "CLMASEL,Select alternative clock when main clock abnormal oscillation is detected in CLMA3" "0: LOCO,1: PLL"
bitfld.long 0x00 21. "PHYSEL,Select the Ethernet PHY reference clock output (ETHn_REFCLK n = 0 to 2)" "0: PLL1 divider clock,1: Main clock oscillator"
newline
bitfld.long 0x00 20. "FSELCANFD,Select the frequency of the clock supplied to CANFD" "0: 80.0 MHz,1: 40.0 MHz"
bitfld.long 0x00 16.--18. "CKIO,Set the frequency of the external bus clock (CKIO) and the clock supplied to BSC in combination with the DIVSELSUB in the SCKCR2 register" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 14. "DIVSELXSPI1,Select the base clock to generate serial clock for xSPI Unit 1" "0: 800 MHz,1: 600 MHz"
bitfld.long 0x00 8.--10. "FSELXSPI1,Set the frequency of the clock provided to xSPI Unit 1 in combination with bit 14 (DIVSELXSPI1)" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 6. "DIVSELXSPI0,Select the base clock to generate serial clock for xSPI Unit 0" "0: 800 MHz,1: 600 MHz"
bitfld.long 0x00 0.--2. "FSELXSPI0,Set the frequency of the clock provided to xSPI Unit 0 in combination with bit 6 (DIVSELXSPI0)" "0,1,2,3,4,5,6,7"
group.long 0x200++0x03
line.long 0x00 "RSTSR0,Reset Status Register 0"
bitfld.long 0x00 4. "SWR0F,CPU0 Software Reset Detect Flag" "0: CPU0 software reset not detected,1: CPU0 software reset detected"
bitfld.long 0x00 3. "SWRSF,System Software Reset Detect Flag" "0: System software reset not detected,1: System software reset detected"
newline
bitfld.long 0x00 2. "ERRF,Error Reset Detect Flag" "0: Error reset not detected,1: Error reset detected"
bitfld.long 0x00 1. "TRF,RES# Pin Reset Detect Flag" "0: RES# pin reset not detected,1: RES# pin reset detected"
group.long 0x240++0x03
line.long 0x00 "MRCTLA,Module Reset Control Register A"
bitfld.long 0x00 5. "MRCTLA05,xSPI Unit 1 Reset Control" "0: xSPI Unit 1 is released from reset,1: xSPI Unit 1 is in the reset state"
bitfld.long 0x00 4. "MRCTLA04,xSPI Unit 0 Reset Control" "0: xSPI Unit 0 is released from reset,1: xSPI Unit 0 is in the reset state"
group.long 0x250++0x03
line.long 0x00 "MRCTLE,Module Reset Control Register E"
bitfld.long 0x00 6. "MRCTLE06,MII Converter Reset Control" "0: MII converter is released from reset,1: MII converter is in the reset state"
bitfld.long 0x00 5. "MRCTLE05,Ethernet Subsystem Register Reset Control" "0: Ethernet Subsystem register is released from..,1: Ethernet Subsystem register is in the reset.."
newline
bitfld.long 0x00 4. "MRCTLE04,ESC (IP clock domain) Reset Control" "0: ESC (IP clock domain) is released from reset,1: ESC (IP clock domain) is in the reset state"
bitfld.long 0x00 3. "MRCTLE03,ESC (Bus clock domain) Reset Control" "0: ESC (Bus clock domain) is released from reset,1: ESC (Bus clock domain) is in the reset state"
newline
bitfld.long 0x00 2. "MRCTLE02,ETHSW Reset Control" "0: ETHSW is released from reset,1: ETHSW is in the reset state"
bitfld.long 0x00 1. "MRCTLE01,GMAC (PCLKM clock domain) Reset Control" "0: GMAC (PCLKM clock domain) is released from..,1: GMAC (PCLKM clock domain) is in the reset state"
newline
bitfld.long 0x00 0. "MRCTLE00,GMAC (PCLKH clock domain) Reset Control" "0: GMAC (PCLKH clock domain) is released from..,1: GMAC (PCLKH clock domain) is in the reset state"
group.long 0x300++0x03
line.long 0x00 "MSTPCRA,Module Stop Control Register A"
bitfld.long 0x00 12. "MSTPCRA12,SCI Unit 4 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 11. "MSTPCRA11,SCI Unit 3 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 10. "MSTPCRA10,SCI Unit 2 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 9. "MSTPCRA09,SCI Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 8. "MSTPCRA08,SCI Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 5. "MSTPCRA05,xSPI Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 4. "MSTPCRA04,xSPI Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 0. "MSTPCRA00,BSC Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
group.long 0x304++0x03
line.long 0x00 "MSTPCRB,Module Stop Control Register B"
bitfld.long 0x00 6. "MSTPCRB06,SPI Unit 2 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 5. "MSTPCRB05,SPI Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 4. "MSTPCRB04,SPI Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 1. "MSTPCRB01,IIC Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 0. "MSTPCRB00,IIC Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
group.long 0x308++0x03
line.long 0x00 "MSTPCRC,Module Stop Control Register C"
bitfld.long 0x00 7. "MSTPCRC07,ADC12 Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 6. "MSTPCRC06,ADC12 Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 5. "MSTPCRC05,TFU Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 2. "MSTPCRC02,GPT Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 1. "MSTPCRC01,GPT Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 0. "MSTPCRC00,MTU3 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
group.long 0x30C++0x03
line.long 0x00 "MSTPCRD,Module Stop Control Register D"
bitfld.long 0x00 11. "MSTPCRD11,CKIO Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 10. "MSTPCRD10,CANFD Module Stop" "0: Release from the module-stop state,1: Transition to the module stop state is made"
newline
bitfld.long 0x00 9. "MSTPCRD09,CRC Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 8. "MSTPCRD08,DOC Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 7. "MSTPCRD07,TSU Module Stop" "0: Release from the module-stop state,1: Transition to the module stop state is made"
bitfld.long 0x00 6. "MSTPCRD06,CMTW Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 5. "MSTPCRD05,CMTW Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 4. "MSTPCRD04,CMT Unit 2 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 3. "MSTPCRD03,CMT Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 2. "MSTPCRD02,CMT Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 1. "MSTPCRD01,DSMIF Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 0. "MSTPCRD00,DSMIF Unit 0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
group.long 0x310++0x03
line.long 0x00 "MSTPCRE,Module Stop Control Register E"
bitfld.long 0x00 8. "MSTPCRE08,USB Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 3. "MSTPCRE03,Ethernet Subsystem Register Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 2. "MSTPCRE02,ESC Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 1. "MSTPCRE01,ETHSW Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 0. "MSTPCRE00,GMAC Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
rgroup.long 0x1100++0x03
line.long 0x00 "MD_MON,Operating Mode Monitor Register"
bitfld.long 0x00 20. "MDV4MON,MDV4 status flag (xSPI1 domain)" "0,1"
bitfld.long 0x00 19. "MDV3MON,MDV3 status flag (xSPI0 domain)" "0,1"
newline
bitfld.long 0x00 18. "MDV2MON,MDV2 status flag (ETH2 domain)" "0,1"
bitfld.long 0x00 17. "MDV1MON,MDV1 status flag (ETH1 domain)" "0,1"
newline
bitfld.long 0x00 16. "MDV0MON,MDV0 status flag (ETH0 domain)" "0,1"
bitfld.long 0x00 14. "MD2MON,MD2 pin status flag" "0,1"
newline
bitfld.long 0x00 13. "MD1MON,MD1 pin status flag" "0,1"
bitfld.long 0x00 12. "MD0MON,MD0 pin status flag" "0,1"
newline
bitfld.long 0x00 8. "MDP,Package type" "0: 225 FBGA,1: 121 FBGA"
bitfld.long 0x00 0. "MDDMON,MDD status flag" "0,1"
tree.end
tree "SYSC_S (Register Write Protection for Safety Area)"
base ad:0x81280000
group.long 0x04++0x03
line.long 0x00 "SCKCR2,System Clock Control Register 2"
bitfld.long 0x00 25. "SCI5ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SCI5" "0: 75.0 MHz,1: 96.0 MHz"
bitfld.long 0x00 24. "SPI3ASYNCSEL,Select clock frequency when asynchronous serial clock is selected in SPI3" "0: 75.0 MHz,1: 96.0 MHz"
newline
bitfld.long 0x00 5. "DIVSELSUB,Select the base clock frequency for peripheral module" "0,1"
bitfld.long 0x00 0. "FSELCPU0,Set the frequency of the clock provided to Coretex-R52 CPU0 in combination with bit 5 (DIVSELSUB)" "0,1"
rgroup.long 0x20++0x03
line.long 0x00 "PLL0MON,PLL0 Monitor Register"
bitfld.long 0x00 0. "PLL0MON,PLL0 Lock State Monitor" "0: PLL0 is not locked,1: PLL0 is locked"
rgroup.long 0x40++0x03
line.long 0x00 "PLL1MON,PLL1 Monitor Register"
bitfld.long 0x00 0. "PLL1MON,PLL1 Lock State Monitor" "0: PLL1 is not locked,1: PLL1 is locked"
group.long 0x50++0x03
line.long 0x00 "PLL1EN,PLL1 Enable Register"
bitfld.long 0x00 0. "PLL1EN,PLL1 Enable" "0: PLL1 is in standby state,1: PLL1 is in normal state"
group.long 0x70++0x03
line.long 0x00 "LOCOCR,Low-Speed On-Chip Oscillator Control Register"
bitfld.long 0x00 0. "LCSTP,LOCO Stop" "0: Stop,1: Run"
group.long 0x80++0x03
line.long 0x00 "HIZCTRLEN,High-Impedance Control Enable Register"
bitfld.long 0x00 2. "CLMA1MASK,CLMA1 error mask to POE3 and POEG" "0: CLMA1 error is not transferred to POE3 and POEG,1: CLMA1 error is transferred to POE3 and POEG"
bitfld.long 0x00 1. "CLMA0MASK,CLMA0 error mask to POE3 and POEG" "0: CLMA0 error is not transferred to POE3 and POEG,1: CLMA0 error is transferred to POE3 and POEG"
newline
bitfld.long 0x00 0. "CLMA3MASK,CLMA3 error mask to POE3 and POEG" "0: CLMA3 error is not transferred to POE3 and POEG,1: CLMA3 error is transferred to POE3 and POEG"
wgroup.long 0x210++0x03
line.long 0x00 "SWRSYS,System Software Reset Register"
hexmask.long 0x00 0.--31. 1. "SWR,System Software Reset"
group.long 0x220++0x03
line.long 0x00 "SWRCPU0,CPU0 Software Reset Register"
hexmask.long 0x00 0.--31. 1. "SWR,CPU0 Software Reset"
group.long 0x314++0x03
line.long 0x00 "MSTPCRF,Module Stop Control Register F"
bitfld.long 0x00 0. "MSTPCRF00,Trace Clock for Debugging Interface Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
group.long 0x318++0x03
line.long 0x00 "MSTPCRG,Module Stop Control Register G"
bitfld.long 0x00 11. "MSTPCRG11,CLMA2 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 10. "MSTPCRG10,CLMA1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 9. "MSTPCRG09,CLMA0 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 8. "MSTPCRG08,CLMA3 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 5. "MSTPCRG05,RTC Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 4. "MSTPCRG04,CRC Unit 1 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 3. "MSTPCRG03,GPT Unit 2 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 2. "MSTPCRG02,SPI Unit 3 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
newline
bitfld.long 0x00 1. "MSTPCRG01,IIC Unit 2 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
bitfld.long 0x00 0. "MSTPCRG00,SCI Unit 5 Module Stop" "0: Release from the module-stop state,1: Transition to the module-stop state is made"
tree.end
tree "SYSRAM_CTL (System SRAM Control)"
base ad:0x81281800
repeat 3. (strings "0" "1" "2" )(list 0x0 0x10 0x20 )
group.long ($2+0x00)++0x03
line.long 0x00 "SYSRAM_CTRL$1,System SRAM Control Register"
bitfld.long 0x00 24. "MKICCAXIERR,Controls AXI-SLVERR issuance for ECC 2-bit errors" "0: Issue AXI-SLEVER,1: Do not issue AXI-SLEVER"
bitfld.long 0x00 21. "VLWEN,Enables write for RAM" "0: Disabled,1: Enabled"
bitfld.long 0x00 20. "VCEN,Enables access to RAM" "0: Disabled,1: Enabled"
bitfld.long 0x00 16.--19. "VRWEN,Enables write for each page of RAM" "0: Disabled,1: Enabled,?..."
bitfld.long 0x00 0. "VECEN,Enables or disables error correction with ECC" "0: Disabled,1: Enabled"
repeat.end
tree.end
tree "SYSRAM (System SRAM)"
repeat 3. (list 0. 1. 2.) (list ad:0x81040000 ad:0x81041000 ad:0x81042000)
tree "SYSRAM$1"
base $2
group.long 0x00++0x03
line.long 0x00 "W0_EC710CTL,ECC Control Register"
rbitfld.long 0x00 30.--31. "ECEDF7,ECC Error Address Capture Flag m (m = 7)" "0,1,2,3"
rbitfld.long 0x00 28.--29. "ECEDF6,ECC Error Address Capture Flag m (m = 6)" "0,1,2,3"
newline
rbitfld.long 0x00 26.--27. "ECEDF5,ECC Error Address Capture Flag m (m = 5)" "0,1,2,3"
rbitfld.long 0x00 24.--25. "ECEDF4,ECC Error Address Capture Flag m (m = 4)" "0,1,2,3"
newline
rbitfld.long 0x00 22.--23. "ECEDF3,ECC Error Address Capture Flag m (m = 3)" "0,1,2,3"
rbitfld.long 0x00 20.--21. "ECEDF2,ECC Error Address Capture Flag m (m = 2)" "0,1,2,3"
newline
rbitfld.long 0x00 18.--19. "ECEDF1,ECC Error Address Capture Flag m (m = 1)" "0,1,2,3"
rbitfld.long 0x00 16.--17. "ECEDF0,ECC Error Address Capture Flag m (m = 0)" "0: ECC error address is not captured in..,1: 1-bit ECC error address is captured in..,2: 2-bit ECC error address is captured in..,?..."
newline
bitfld.long 0x00 14.--15. "EMCA,Access Control to ECC Mode Selection" "?,1: Writing is enabled,?..."
rbitfld.long 0x00 11. "ECOVFF,ECC Error Address Capture Overflow Flag" "0: ECC error address capture overflow has not..,1: ECC error address capture overflow has occurred"
newline
bitfld.long 0x00 10. "ECER2C,2-Bit ECC Error Detection Clear" "0,1"
bitfld.long 0x00 9. "ECER1C,1-Bit ECC Error Detection Clear" "0,1"
newline
bitfld.long 0x00 7. "ECTHM,ECC Function Through Mode Enable" "0: Disables Through mode,1: Enables Through mode"
bitfld.long 0x00 6. "ECERVF,ECC Error Determination Enable" "0: The error determination is disabled,1: The error determination is enabled"
newline
bitfld.long 0x00 5. "EC1ECP,1-Bit ECC Error Correction Enable" "0: Error correction is performed on detection of..,1: Error correction is not performed on.."
bitfld.long 0x00 4. "EC2EDIC,2-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
newline
bitfld.long 0x00 3. "EC1EDIC,1-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
rbitfld.long 0x00 2. "ECER2F,2-Bit ECC Error Detection Flag" "0: 2-bit error has not occurred,1: 2-bit error has occurred"
newline
rbitfld.long 0x00 1. "ECER1F,1-Bit ECC Error Detection/Correction Flag" "0: 1-bit error has not occurred,1: 1-bit error has occurred"
rbitfld.long 0x00 0. "ECEMF,ECC Error Indicate Flag" "0: No error is detected in the current read data,1: An error is detected in the current read data"
group.long 0x40++0x03
line.long 0x00 "W1_EC710CTL,ECC Control Register"
rbitfld.long 0x00 30.--31. "ECEDF7,ECC Error Address Capture Flag m (m = 7)" "0,1,2,3"
rbitfld.long 0x00 28.--29. "ECEDF6,ECC Error Address Capture Flag m (m = 6)" "0,1,2,3"
newline
rbitfld.long 0x00 26.--27. "ECEDF5,ECC Error Address Capture Flag m (m = 5)" "0,1,2,3"
rbitfld.long 0x00 24.--25. "ECEDF4,ECC Error Address Capture Flag m (m = 4)" "0,1,2,3"
newline
rbitfld.long 0x00 22.--23. "ECEDF3,ECC Error Address Capture Flag m (m = 3)" "0,1,2,3"
rbitfld.long 0x00 20.--21. "ECEDF2,ECC Error Address Capture Flag m (m = 2)" "0,1,2,3"
newline
rbitfld.long 0x00 18.--19. "ECEDF1,ECC Error Address Capture Flag m (m = 1)" "0,1,2,3"
rbitfld.long 0x00 16.--17. "ECEDF0,ECC Error Address Capture Flag m (m = 0)" "0: ECC error address is not captured in..,1: 1-bit ECC error address is captured in..,2: 2-bit ECC error address is captured in..,?..."
newline
bitfld.long 0x00 14.--15. "EMCA,Access Control to ECC Mode Selection" "?,1: Writing is enabled,?..."
rbitfld.long 0x00 11. "ECOVFF,ECC Error Address Capture Overflow Flag" "0: ECC error address capture overflow has not..,1: ECC error address capture overflow has occurred"
newline
bitfld.long 0x00 10. "ECER2C,2-Bit ECC Error Detection Clear" "0,1"
bitfld.long 0x00 9. "ECER1C,1-Bit ECC Error Detection Clear" "0,1"
newline
bitfld.long 0x00 7. "ECTHM,ECC Function Through Mode Enable" "0: Disables Through mode,1: Enables Through mode"
bitfld.long 0x00 6. "ECERVF,ECC Error Determination Enable" "0: The error determination is disabled,1: The error determination is enabled"
newline
bitfld.long 0x00 5. "EC1ECP,1-Bit ECC Error Correction Enable" "0: Error correction is performed on detection of..,1: Error correction is not performed on.."
bitfld.long 0x00 4. "EC2EDIC,2-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
newline
bitfld.long 0x00 3. "EC1EDIC,1-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
rbitfld.long 0x00 2. "ECER2F,2-Bit ECC Error Detection Flag" "0: 2-bit error has not occurred,1: 2-bit error has occurred"
newline
rbitfld.long 0x00 1. "ECER1F,1-Bit ECC Error Detection/Correction Flag" "0: 1-bit error has not occurred,1: 1-bit error has occurred"
rbitfld.long 0x00 0. "ECEMF,ECC Error Indicate Flag" "0: No error is detected in the current read data,1: An error is detected in the current read data"
group.long 0x80++0x03
line.long 0x00 "W2_EC710CTL,ECC Control Register"
rbitfld.long 0x00 30.--31. "ECEDF7,ECC Error Address Capture Flag m (m = 7)" "0,1,2,3"
rbitfld.long 0x00 28.--29. "ECEDF6,ECC Error Address Capture Flag m (m = 6)" "0,1,2,3"
newline
rbitfld.long 0x00 26.--27. "ECEDF5,ECC Error Address Capture Flag m (m = 5)" "0,1,2,3"
rbitfld.long 0x00 24.--25. "ECEDF4,ECC Error Address Capture Flag m (m = 4)" "0,1,2,3"
newline
rbitfld.long 0x00 22.--23. "ECEDF3,ECC Error Address Capture Flag m (m = 3)" "0,1,2,3"
rbitfld.long 0x00 20.--21. "ECEDF2,ECC Error Address Capture Flag m (m = 2)" "0,1,2,3"
newline
rbitfld.long 0x00 18.--19. "ECEDF1,ECC Error Address Capture Flag m (m = 1)" "0,1,2,3"
rbitfld.long 0x00 16.--17. "ECEDF0,ECC Error Address Capture Flag m (m = 0)" "0: ECC error address is not captured in..,1: 1-bit ECC error address is captured in..,2: 2-bit ECC error address is captured in..,?..."
newline
bitfld.long 0x00 14.--15. "EMCA,Access Control to ECC Mode Selection" "?,1: Writing is enabled,?..."
rbitfld.long 0x00 11. "ECOVFF,ECC Error Address Capture Overflow Flag" "0: ECC error address capture overflow has not..,1: ECC error address capture overflow has occurred"
newline
bitfld.long 0x00 10. "ECER2C,2-Bit ECC Error Detection Clear" "0,1"
bitfld.long 0x00 9. "ECER1C,1-Bit ECC Error Detection Clear" "0,1"
newline
bitfld.long 0x00 7. "ECTHM,ECC Function Through Mode Enable" "0: Disables Through mode,1: Enables Through mode"
bitfld.long 0x00 6. "ECERVF,ECC Error Determination Enable" "0: The error determination is disabled,1: The error determination is enabled"
newline
bitfld.long 0x00 5. "EC1ECP,1-Bit ECC Error Correction Enable" "0: Error correction is performed on detection of..,1: Error correction is not performed on.."
bitfld.long 0x00 4. "EC2EDIC,2-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
newline
bitfld.long 0x00 3. "EC1EDIC,1-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
rbitfld.long 0x00 2. "ECER2F,2-Bit ECC Error Detection Flag" "0: 2-bit error has not occurred,1: 2-bit error has occurred"
newline
rbitfld.long 0x00 1. "ECER1F,1-Bit ECC Error Detection/Correction Flag" "0: 1-bit error has not occurred,1: 1-bit error has occurred"
rbitfld.long 0x00 0. "ECEMF,ECC Error Indicate Flag" "0: No error is detected in the current read data,1: An error is detected in the current read data"
group.long 0xC0++0x03
line.long 0x00 "W3_EC710CTL,ECC Control Register"
rbitfld.long 0x00 30.--31. "ECEDF7,ECC Error Address Capture Flag m (m = 7)" "0,1,2,3"
rbitfld.long 0x00 28.--29. "ECEDF6,ECC Error Address Capture Flag m (m = 6)" "0,1,2,3"
newline
rbitfld.long 0x00 26.--27. "ECEDF5,ECC Error Address Capture Flag m (m = 5)" "0,1,2,3"
rbitfld.long 0x00 24.--25. "ECEDF4,ECC Error Address Capture Flag m (m = 4)" "0,1,2,3"
newline
rbitfld.long 0x00 22.--23. "ECEDF3,ECC Error Address Capture Flag m (m = 3)" "0,1,2,3"
rbitfld.long 0x00 20.--21. "ECEDF2,ECC Error Address Capture Flag m (m = 2)" "0,1,2,3"
newline
rbitfld.long 0x00 18.--19. "ECEDF1,ECC Error Address Capture Flag m (m = 1)" "0,1,2,3"
rbitfld.long 0x00 16.--17. "ECEDF0,ECC Error Address Capture Flag m (m = 0)" "0: ECC error address is not captured in..,1: 1-bit ECC error address is captured in..,2: 2-bit ECC error address is captured in..,?..."
newline
bitfld.long 0x00 14.--15. "EMCA,Access Control to ECC Mode Selection" "?,1: Writing is enabled,?..."
rbitfld.long 0x00 11. "ECOVFF,ECC Error Address Capture Overflow Flag" "0: ECC error address capture overflow has not..,1: ECC error address capture overflow has occurred"
newline
bitfld.long 0x00 10. "ECER2C,2-Bit ECC Error Detection Clear" "0,1"
bitfld.long 0x00 9. "ECER1C,1-Bit ECC Error Detection Clear" "0,1"
newline
bitfld.long 0x00 7. "ECTHM,ECC Function Through Mode Enable" "0: Disables Through mode,1: Enables Through mode"
bitfld.long 0x00 6. "ECERVF,ECC Error Determination Enable" "0: The error determination is disabled,1: The error determination is enabled"
newline
bitfld.long 0x00 5. "EC1ECP,1-Bit ECC Error Correction Enable" "0: Error correction is performed on detection of..,1: Error correction is not performed on.."
bitfld.long 0x00 4. "EC2EDIC,2-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
newline
bitfld.long 0x00 3. "EC1EDIC,1-Bit ECC Error Detection Interrupt Control" "0: Disables to output an interrupt signal,1: Enables to output an interrupt signal"
rbitfld.long 0x00 2. "ECER2F,2-Bit ECC Error Detection Flag" "0: 2-bit error has not occurred,1: 2-bit error has occurred"
newline
rbitfld.long 0x00 1. "ECER1F,1-Bit ECC Error Detection/Correction Flag" "0: 1-bit error has not occurred,1: 1-bit error has occurred"
rbitfld.long 0x00 0. "ECEMF,ECC Error Indicate Flag" "0: No error is detected in the current read data,1: An error is detected in the current read data"
group.long 0x04++0x03
line.long 0x00 "W0_EC710TMC,ECC Test Mode Control Register"
bitfld.long 0x00 14.--15. "ETMA,ECTMCE Write Enable" "?,?,2: Writing is enabled,?..."
bitfld.long 0x00 7. "ECTMCE,Test Mode Enable" "0: Disables access to the test mode register and..,1: Enables access to the test mode register and.."
newline
bitfld.long 0x00 4. "ECTRRS,RAM Read Test Mode Select" "0: Read value is the written value for the..,1: Read value of Wn_EC710TED register is 32-bit.."
bitfld.long 0x00 3. "ECREOS,ECC Redundancy Bit Output Data Select" "0: The encoded result of the encoder is output,1: The value of the ECERDB[6:0] bits in the.."
newline
bitfld.long 0x00 2. "ECENS,ECC Encode Input Select" "0: Data input to RAM is selected,1: The value of the Wn_EC710TED register is.."
bitfld.long 0x00 1. "ECDCS,ECC Decode Input Select" "0: RAM output data is input to the decoder,1: The value of the Wn_EC710TED register is.."
newline
bitfld.long 0x00 0. "ECREIS,ECC Redundancy Bit Input Data Select" "0: ECC data read from RAM is input to the decoder,1: The value of the ECERDB[6:0] bits is input to.."
group.long 0x44++0x03
line.long 0x00 "W1_EC710TMC,ECC Test Mode Control Register"
bitfld.long 0x00 14.--15. "ETMA,ECTMCE Write Enable" "?,?,2: Writing is enabled,?..."
bitfld.long 0x00 7. "ECTMCE,Test Mode Enable" "0: Disables access to the test mode register and..,1: Enables access to the test mode register and.."
newline
bitfld.long 0x00 4. "ECTRRS,RAM Read Test Mode Select" "0: Read value is the written value for the..,1: Read value of Wn_EC710TED register is 32-bit.."
bitfld.long 0x00 3. "ECREOS,ECC Redundancy Bit Output Data Select" "0: The encoded result of the encoder is output,1: The value of the ECERDB[6:0] bits in the.."
newline
bitfld.long 0x00 2. "ECENS,ECC Encode Input Select" "0: Data input to RAM is selected,1: The value of the Wn_EC710TED register is.."
bitfld.long 0x00 1. "ECDCS,ECC Decode Input Select" "0: RAM output data is input to the decoder,1: The value of the Wn_EC710TED register is.."
newline
bitfld.long 0x00 0. "ECREIS,ECC Redundancy Bit Input Data Select" "0: ECC data read from RAM is input to the decoder,1: The value of the ECERDB[6:0] bits is input to.."
group.long 0x84++0x03
line.long 0x00 "W2_EC710TMC,ECC Test Mode Control Register"
bitfld.long 0x00 14.--15. "ETMA,ECTMCE Write Enable" "?,?,2: Writing is enabled,?..."
bitfld.long 0x00 7. "ECTMCE,Test Mode Enable" "0: Disables access to the test mode register and..,1: Enables access to the test mode register and.."
newline
bitfld.long 0x00 4. "ECTRRS,RAM Read Test Mode Select" "0: Read value is the written value for the..,1: Read value of Wn_EC710TED register is 32-bit.."
bitfld.long 0x00 3. "ECREOS,ECC Redundancy Bit Output Data Select" "0: The encoded result of the encoder is output,1: The value of the ECERDB[6:0] bits in the.."
newline
bitfld.long 0x00 2. "ECENS,ECC Encode Input Select" "0: Data input to RAM is selected,1: The value of the Wn_EC710TED register is.."
bitfld.long 0x00 1. "ECDCS,ECC Decode Input Select" "0: RAM output data is input to the decoder,1: The value of the Wn_EC710TED register is.."
newline
bitfld.long 0x00 0. "ECREIS,ECC Redundancy Bit Input Data Select" "0: ECC data read from RAM is input to the decoder,1: The value of the ECERDB[6:0] bits is input to.."
group.long 0xC4++0x03
line.long 0x00 "W3_EC710TMC,ECC Test Mode Control Register"
bitfld.long 0x00 14.--15. "ETMA,ECTMCE Write Enable" "?,?,2: Writing is enabled,?..."
bitfld.long 0x00 7. "ECTMCE,Test Mode Enable" "0: Disables access to the test mode register and..,1: Enables access to the test mode register and.."
newline
bitfld.long 0x00 4. "ECTRRS,RAM Read Test Mode Select" "0: Read value is the written value for the..,1: Read value of Wn_EC710TED register is 32-bit.."
bitfld.long 0x00 3. "ECREOS,ECC Redundancy Bit Output Data Select" "0: The encoded result of the encoder is output,1: The value of the ECERDB[6:0] bits in the.."
newline
bitfld.long 0x00 2. "ECENS,ECC Encode Input Select" "0: Data input to RAM is selected,1: The value of the Wn_EC710TED register is.."
bitfld.long 0x00 1. "ECDCS,ECC Decode Input Select" "0: RAM output data is input to the decoder,1: The value of the Wn_EC710TED register is.."
newline
bitfld.long 0x00 0. "ECREIS,ECC Redundancy Bit Input Data Select" "0: ECC data read from RAM is input to the decoder,1: The value of the ECERDB[6:0] bits is input to.."
group.long 0x08++0x03
line.long 0x00 "W0_EC710TRC,ECC Redundancy Bit Data Control Test Register"
hexmask.long.byte 0x00 24.--30. 1. "ECSYND,ECC Decode Syndrome Register"
hexmask.long.byte 0x00 16.--22. 1. "ECHORD,ECC 7-Redundancy-Bit Data Retain Test Register"
newline
hexmask.long.byte 0x00 8.--14. 1. "ECECRD,ECC Encode Test Register"
hexmask.long.byte 0x00 0.--6. 1. "ECERDB,ECC Redundancy Bit Input/Output Substitute Buffer Register"
group.long 0x48++0x03
line.long 0x00 "W1_EC710TRC,ECC Redundancy Bit Data Control Test Register"
hexmask.long.byte 0x00 24.--30. 1. "ECSYND,ECC Decode Syndrome Register"
hexmask.long.byte 0x00 16.--22. 1. "ECHORD,ECC 7-Redundancy-Bit Data Retain Test Register"
newline
hexmask.long.byte 0x00 8.--14. 1. "ECECRD,ECC Encode Test Register"
hexmask.long.byte 0x00 0.--6. 1. "ECERDB,ECC Redundancy Bit Input/Output Substitute Buffer Register"
group.long 0x88++0x03
line.long 0x00 "W2_EC710TRC,ECC Redundancy Bit Data Control Test Register"
hexmask.long.byte 0x00 24.--30. 1. "ECSYND,ECC Decode Syndrome Register"
hexmask.long.byte 0x00 16.--22. 1. "ECHORD,ECC 7-Redundancy-Bit Data Retain Test Register"
newline
hexmask.long.byte 0x00 8.--14. 1. "ECECRD,ECC Encode Test Register"
hexmask.long.byte 0x00 0.--6. 1. "ECERDB,ECC Redundancy Bit Input/Output Substitute Buffer Register"
group.long 0xC8++0x03
line.long 0x00 "W3_EC710TRC,ECC Redundancy Bit Data Control Test Register"
hexmask.long.byte 0x00 24.--30. 1. "ECSYND,ECC Decode Syndrome Register"
hexmask.long.byte 0x00 16.--22. 1. "ECHORD,ECC 7-Redundancy-Bit Data Retain Test Register"
newline
hexmask.long.byte 0x00 8.--14. 1. "ECECRD,ECC Encode Test Register"
hexmask.long.byte 0x00 0.--6. 1. "ECERDB,ECC Redundancy Bit Input/Output Substitute Buffer Register"
group.long 0x0C++0x03
line.long 0x00 "W0_EC710TED,ECC Encode/Decode Input/Output Switchover Test Register"
hexmask.long 0x00 0.--31. 1. "ECEDB,32-Bit Data Test Register for ECC Encode/Decode"
group.long 0x4C++0x03
line.long 0x00 "W1_EC710TED,ECC Encode/Decode Input/Output Switchover Test Register"
hexmask.long 0x00 0.--31. 1. "ECEDB,32-Bit Data Test Register for ECC Encode/Decode"
group.long 0x8C++0x03
line.long 0x00 "W2_EC710TED,ECC Encode/Decode Input/Output Switchover Test Register"
hexmask.long 0x00 0.--31. 1. "ECEDB,32-Bit Data Test Register for ECC Encode/Decode"
group.long 0xCC++0x03
line.long 0x00 "W3_EC710TED,ECC Encode/Decode Input/Output Switchover Test Register"
hexmask.long 0x00 0.--31. 1. "ECEDB,32-Bit Data Test Register for ECC Encode/Decode"
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
rgroup.long ($2+0x10)++0x03
line.long 0x00 "W0_EC710EAD$1,ECC Error Address"
hexmask.long.word 0x00 0.--14. 1. "ECEAD,Bit Error Address"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
rgroup.long ($2+0x50)++0x03
line.long 0x00 "W1_EC710EAD$1,ECC Error Address"
hexmask.long.word 0x00 0.--14. 1. "ECEAD,Bit Error Address"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
rgroup.long ($2+0x90)++0x03
line.long 0x00 "W2_EC710EAD$1,ECC Error Address"
hexmask.long.word 0x00 0.--14. 1. "ECEAD,Bit Error Address"
repeat.end
repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C )
rgroup.long ($2+0xD0)++0x03
line.long 0x00 "W3_EC710EAD$1,ECC Error Address"
hexmask.long.word 0x00 0.--14. 1. "ECEAD,Bit Error Address"
repeat.end
tree.end
repeat.end
tree.end
tree "TFU (Trigonometric Function Unit)"
base ad:0x90003000
rgroup.byte 0x08++0x00
line.byte 0x00 "TRGSTS,Trigonometric Status Register"
bitfld.byte 0x00 1. "ERRF,Input error flag" "0: No input error occurred,1: Input error occurred"
bitfld.byte 0x00 0. "BSYF,Calculation in progress flag" "0: No calculating,1: Calculating"
group.long 0x10++0x03
line.long 0x00 "SCDT0,Sine Cosine Data Register 0"
hexmask.long 0x00 0.--31. 1. "SCDT0,Sine Cosine Data Register 0 (single-precision floating-point)"
group.long 0x14++0x03
line.long 0x00 "SCDT1,Sine Cosine Data Register 1"
hexmask.long 0x00 0.--31. 1. "SCDT1,Sine Cosine Data Register 1 (single-precision floating-point)"
group.long 0x18++0x03
line.long 0x00 "ATDT0,Arctangent Data Register 0"
hexmask.long 0x00 0.--31. 1. "ATDT0,Arctangent Data Register 0 (single-precision floating-point)"
group.long 0x1C++0x03
line.long 0x00 "ATDT1,Arctangent Data Register 1"
hexmask.long 0x00 0.--31. 1. "ATDT1,Arctangent Data Register 1 (single-precision floating-point)"
tree.end
tree "TSU (Temperature Sensor Unit)"
base ad:0x80046000
group.long 0x00++0x03
line.long 0x00 "TSUSM,Sensor Mode Register"
bitfld.long 0x00 1. "ADCEN,ADC Enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 0. "TSEN,Temperature Sensor Enable" "0: Disabled,1: Enabled"
group.long 0x04++0x03
line.long 0x00 "TSUST,Sensor Trigger Register"
bitfld.long 0x00 0. "START,A/D Conversion Control" "0: Stops A/D conversion,1: Starts A/D conversion"
group.long 0x08++0x03
line.long 0x00 "TSUSCS,Sensor Configuration Setting Register"
bitfld.long 0x00 3. "CKDIV,Divider Value for PCLKL" "0: 24 for PCLKL = 50 MHz,1: 16 for PCLKL = 37.5 MHz"
rgroup.long 0x0C++0x03
line.long 0x00 "TSUSAD,Sensor ADC Data Register"
hexmask.long.word 0x00 0.--11. 1. "DOUT,Temperature Sensor Data Output"
rgroup.long 0x10++0x03
line.long 0x00 "TSUSS,Sensor Status Register"
bitfld.long 0x00 0. "CONV,A/D Conversion Status" "0: Stop,1: A/D conversion is running"
tree.end
tree "USBF (USB 2.0 Host and Function Module)"
base ad:0x80201000
group.word 0x00++0x01
line.word 0x00 "SYSCFG0,System Configuration Control Register 0"
bitfld.word 0x00 8. "CNEN,Single-End Receiver Operation Enable" "0: Single-end receiver operation is disabled,1: Single-end receiver operation is enabled"
bitfld.word 0x00 7. "HSE,High-Speed Operation Enable" "0: High-speed operation is disabled (full-speed),1: High-speed operation is enabled (the.."
newline
bitfld.word 0x00 5. "DRPD,D+/D Line Resistor Control" "0,1"
bitfld.word 0x00 4. "DPRPU,D+ Line Resistor Control" "0: Pulling up the line is disabled,1: Pulling up the line is enabled"
newline
bitfld.word 0x00 0. "USBE,USB Block Operation Enable" "0: USB block operation is disabled,1: USB block operation is enabled"
group.word 0x02++0x01
line.word 0x00 "SYSCFG1,System Configuration Control Register 1"
bitfld.word 0x00 8.--13. "AWAIT,AHB-DMA Bridge Bus Access Wait Specification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.word 0x00 0.--5. "BWAIT,CPU Bus Access Wait Specification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.word 0x04++0x01
line.word 0x00 "SYSSTS0,System Configuration Status Register"
bitfld.word 0x00 0.--1. "LNST,USB Data Line Status Monitor" "0,1,2,3"
group.word 0x08++0x01
line.word 0x00 "DVSTCTR0,Device State Control Register 0"
bitfld.word 0x00 8. "WKUP,Wakeup Output" "0: Remote wakeup signal is not output,1: Remote wakeup signal is output"
rbitfld.word 0x00 0.--2. "RHST,Reset Handshake" "0,1,2,3,4,5,6,7"
group.word 0x0C++0x01
line.word 0x00 "TESTMODE,USB Test Mode Register"
bitfld.word 0x00 0.--3. "UTST,Test Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x14++0x03
line.long 0x00 "CFIFO,FIFO Port Register"
hexmask.long 0x00 0.--31. 1. "FIFOPORT,FIFO Port"
group.word 0x14++0x01
line.word 0x00 "CFIFOL,FIFO Port Register"
group.byte 0x14++0x00
line.byte 0x00 "CFIFOLL,FIFO Port Register"
group.word 0x16++0x01
line.word 0x00 "CFIFOH,FIFO Port Register"
hexmask.word 0x00 0.--15. 1. "FIFOPORT,FIFO Port"
group.byte 0x17++0x00
line.byte 0x00 "CFIFOHH,FIFO Port Register"
hexmask.byte 0x00 0.--7. 1. "FIFOPORT,FIFO Port"
group.long 0x18++0x03
line.long 0x00 "D0FIFO,FIFO Port Register"
hexmask.long 0x00 0.--31. 1. "FIFOPORT,FIFO Port"
group.word 0x18++0x01
line.word 0x00 "D0FIFOL,FIFO Port Register"
group.byte 0x18++0x00
line.byte 0x00 "D0FIFOLL,FIFO Port Register"
group.word 0x1A++0x01
line.word 0x00 "D0FIFOH,FIFO Port Register"
hexmask.word 0x00 0.--15. 1. "FIFOPORT,FIFO Port"
group.byte 0x1B++0x00
line.byte 0x00 "D0FIFOHH,FIFO Port Register"
hexmask.byte 0x00 0.--7. 1. "FIFOPORT,FIFO Port"
group.long 0x1C++0x03
line.long 0x00 "D1FIFO,FIFO Port Register"
hexmask.long 0x00 0.--31. 1. "FIFOPORT,FIFO Port"
group.word 0x1C++0x01
line.word 0x00 "D1FIFOL,FIFO Port Register"
group.byte 0x1C++0x00
line.byte 0x00 "D1FIFOLL,FIFO Port Register"
group.word 0x1E++0x01
line.word 0x00 "D1FIFOH,FIFO Port Register"
hexmask.word 0x00 0.--15. 1. "FIFOPORT,FIFO Port"
group.byte 0x1F++0x00
line.byte 0x00 "D1FIFOHH,FIFO Port Register"
hexmask.byte 0x00 0.--7. 1. "FIFOPORT,FIFO Port"
group.word 0x20++0x01
line.word 0x00 "CFIFOSEL,CFIFO Port Select Register"
bitfld.word 0x00 15. "RCNT,Read Count Mode" "0: The DTLN bits are cleared when all of the..,1: The DTLN bits are decremented each time the.."
bitfld.word 0x00 14. "REW,Buffer Pointer Rewind" "0: The buffer pointer is not rewound,1: The buffer pointer is rewound"
newline
bitfld.word 0x00 10.--11. "MBW,CFIFO Port Access Bit Width" "0: 8 bit width,1: 16 bit width,2: 32 bit width,3: Setting prohibited"
bitfld.word 0x00 8. "BIGEND,FIFO Port Endian Control" "0: Little endian,1: Big endian"
newline
bitfld.word 0x00 5. "ISEL,FIFO Port Access Direction when DCP is Selected" "0: Reading from the buffer memory,1: Writing to the buffer memory"
bitfld.word 0x00 0.--3. "CURPIPE,FIFO Port Access Pipe Specification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x22++0x01
line.word 0x00 "CFIFOCTR,FIFO Port Control Register"
bitfld.word 0x00 15. "BVAL,Buffer Memory Valid Flag" "0: Invalid,1: Writing ended"
bitfld.word 0x00 14. "BCLR,CPU Buffer Clear" "0: Invalid,1: Clears the CPU buffer memory on the CPU side"
newline
rbitfld.word 0x00 13. "FRDY,FIFO Port Ready" "0: FIFO port is not accessible,1: FIFO port is accessible"
hexmask.word 0x00 0.--11. 1. "DTLN,Receive Data Length"
group.word 0x28++0x01
line.word 0x00 "D0FIFOSEL,D"
bitfld.word 0x00 15. "RCNT,Read Count Mode" "0: The DTLN bits are cleared when all of the..,1: The DTLN bits are decremented each time the.."
bitfld.word 0x00 14. "REW,Buffer Pointer Rewind" "0: The buffer pointer is not rewound,1: The buffer pointer is rewound"
newline
bitfld.word 0x00 13. "DCLRM,Auto Buffer Memory Clear Mode after Specified Pipe Data is" "0: Auto buffer clear mode is disabled,1: Auto buffer clear mode is enabled"
bitfld.word 0x00 12. "DREQE,DMA Request Enable" "0: DMA request is disabled,1: DMA request is enabled"
newline
bitfld.word 0x00 10.--11. "MBW,FIFO Port Access Bit Width" "0: 8 bit width,1: 16 bit width,2: 32 bit width,3: Setting prohibited"
bitfld.word 0x00 8. "BIGEND,FIFO Port Endian Control" "0: Little endian,1: Big endian"
newline
bitfld.word 0x00 0.--3. "CURPIPE,FIFO Port Access Pipe Specification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x2C++0x01
line.word 0x00 "D1FIFOSEL,D"
bitfld.word 0x00 15. "RCNT,Read Count Mode" "0: The DTLN bits are cleared when all of the..,1: The DTLN bits are decremented each time the.."
bitfld.word 0x00 14. "REW,Buffer Pointer Rewind" "0: The buffer pointer is not rewound,1: The buffer pointer is rewound"
newline
bitfld.word 0x00 13. "DCLRM,Auto Buffer Memory Clear Mode after Specified Pipe Data is" "0: Auto buffer clear mode is disabled,1: Auto buffer clear mode is enabled"
bitfld.word 0x00 12. "DREQE,DMA Request Enable" "0: DMA request is disabled,1: DMA request is enabled"
newline
bitfld.word 0x00 10.--11. "MBW,FIFO Port Access Bit Width" "0: 8 bit width,1: 16 bit width,2: 32 bit width,3: Setting prohibited"
bitfld.word 0x00 8. "BIGEND,FIFO Port Endian Control" "0: Little endian,1: Big endian"
newline
bitfld.word 0x00 0.--3. "CURPIPE,FIFO Port Access Pipe Specification" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x2A++0x01
line.word 0x00 "D0FIFOCTR,FIFO Port Control Register"
bitfld.word 0x00 15. "BVAL,Buffer Memory Valid Flag" "0: Invalid,1: Writing ended"
bitfld.word 0x00 14. "BCLR,CPU Buffer Clear" "0: Invalid,1: Clears the CPU buffer memory on the CPU side"
newline
rbitfld.word 0x00 13. "FRDY,FIFO Port Ready" "0: FIFO port is not accessible,1: FIFO port is accessible"
hexmask.word 0x00 0.--11. 1. "DTLN,Receive Data Length"
group.word 0x2E++0x01
line.word 0x00 "D1FIFOCTR,FIFO Port Control Register"
bitfld.word 0x00 15. "BVAL,Buffer Memory Valid Flag" "0: Invalid,1: Writing ended"
bitfld.word 0x00 14. "BCLR,CPU Buffer Clear" "0: Invalid,1: Clears the CPU buffer memory on the CPU side"
newline
rbitfld.word 0x00 13. "FRDY,FIFO Port Ready" "0: FIFO port is not accessible,1: FIFO port is accessible"
hexmask.word 0x00 0.--11. 1. "DTLN,Receive Data Length"
group.word 0x30++0x01
line.word 0x00 "INTENB0,Interrupt Enable Register 0"
bitfld.word 0x00 15. "VBSE,VBUS Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
bitfld.word 0x00 14. "RSME,Resume Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
newline
bitfld.word 0x00 13. "SOFE,Frame Number Update Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
bitfld.word 0x00 12. "DVSE,Device State Transition Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
newline
bitfld.word 0x00 11. "CTRE,Control Transfer Stage Transition Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
bitfld.word 0x00 10. "BEMPE,Buffer Empty Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
newline
bitfld.word 0x00 9. "NRDYE,Buffer Not Ready Response Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
bitfld.word 0x00 8. "BRDYE,Buffer Ready Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
group.word 0x32++0x01
line.word 0x00 "INTENB1,Interrupt Enable Register 1"
bitfld.word 0x00 0. "PDDETINTE,PDDETINT Detection Interrupt Enable" "0: Interrupt output disabled,1: Interrupt output enabled"
group.word 0x36++0x01
line.word 0x00 "BRDYENB,BRDY Interrupt Enable Register"
hexmask.word 0x00 0.--9. 1. "PIPEBRDYE,BRDY Interrupt Enable for Each Pipe"
group.word 0x38++0x01
line.word 0x00 "NRDYENB,NRDY Interrupt Enable Register"
hexmask.word 0x00 0.--9. 1. "PIPENRDYE,NRDY Interrupt Enable for Each Pipe"
group.word 0x3A++0x01
line.word 0x00 "BEMPENB,BEMP Interrupt Enable Register"
hexmask.word 0x00 0.--9. 1. "PIPEBEMPE,BEMP Interrupt Enable for Each Pipe"
group.word 0x3C++0x01
line.word 0x00 "SOFCFG,SOF Pin Configuration Register"
bitfld.word 0x00 6. "BRDYM,PIPEBRDY Interrupt Status Clear Timing" "0: Software clears the state,1: Hardware clears the state by reading from the.."
bitfld.word 0x00 5. "INTL,Interrupt Output Sense Select" "0: Edge sense,1: Level sense"
newline
rbitfld.word 0x00 4. "EDGESTS,Interrupt Edge Processing Status" "0: Processing in response to an edge-sensed..,1: Processing in response to an edge-sensed.."
group.word 0x40++0x01
line.word 0x00 "INTSTS0,Interrupt Status Register 0"
bitfld.word 0x00 15. "VBINT,VBUS Change Detect Interrupt Status" "0: VBUS interrupts not generated,1: VBUS interrupts generated"
bitfld.word 0x00 14. "RESM,Resume Interrupt Status" "0: Resume interrupts not generated,1: Resume interrupts generated"
newline
bitfld.word 0x00 13. "SOFR,Frame Number Update Interrupt Status" "0: SOF interrupts not generated,1: SOF interrupts generated"
bitfld.word 0x00 12. "DVST,Device State Transition Interrupt Status" "0: Device state transition interrupts not..,1: Device state transition interrupts generated"
newline
bitfld.word 0x00 11. "CTRT,Control Transfer Stage Transition Interrupt Status" "0: Control transfer stage transition interrupts..,1: Control transfer stage transition interrupts.."
rbitfld.word 0x00 10. "BEMP,BEMP Interrupt Status" "0: BEMP interrupts not generated,1: BEMP interrupts generated"
newline
rbitfld.word 0x00 9. "NRDY,NRDY Interrupt Status" "0: NRDY interrupts not generated,1: NRDY interrupts generated"
rbitfld.word 0x00 8. "BRDY,BRDY Interrupt Status" "0: BRDY interrupts not generated,1: BRDY interrupts generated"
newline
rbitfld.word 0x00 7. "VBSTS,VBUS Input Status" "0: USB_VBUSIN pin is at the low level,1: USB_VBUSIN pin is at the high level"
rbitfld.word 0x00 4.--6. "DVSQ,Device State" "0: Powered state,1: Default state,2: Address state,3: Configured state,4: Suspended state,5: Suspended state,6: Suspended state,7: Suspended state"
newline
bitfld.word 0x00 3. "VALID,USB Request Reception" "0: Not detected,1: Setup packet reception"
rbitfld.word 0x00 0.--2. "CTSQ,Control Transfer Stage" "0: Idle or setup stage,1: Control read data stage,2: Control read status stage,3: Control write data stage,4: Control write status stage,5: Control write (no data) status stage,6: Control transfer sequence error,7: Reserved"
group.word 0x42++0x01
line.word 0x00 "INTSTS1,Interrupt Status Register 1"
bitfld.word 0x00 0. "PDDETINT,PDDET Detection Interrupt Status" "0: PDDET interrupts not generated,1: PDDET interrupts generated"
group.word 0x46++0x01
line.word 0x00 "BRDYSTS,BRDY Interrupt Status Register"
hexmask.word 0x00 0.--9. 1. "PIPEBRDY,BRDY Interrupt Status for Each Pipe"
group.word 0x48++0x01
line.word 0x00 "NRDYSTS,NRDY Interrupt Status Register"
hexmask.word 0x00 0.--9. 1. "PIPENRDY,NRDY Interrupt Status for Each Pipe"
group.word 0x4A++0x01
line.word 0x00 "BEMPSTS,BEMP Interrupt Status Register"
hexmask.word 0x00 0.--9. 1. "PIPEBEMP,BEMP Interrupt Status for Each Pipe"
group.word 0x4C++0x01
line.word 0x00 "FRMNUM,Frame Number Register"
bitfld.word 0x00 15. "OVRN,Overrun/Underrun Detection Status" "0: No error,1: An error occurred"
bitfld.word 0x00 14. "CRCE,CRC Error Detection Status" "0: No error,1: An error occurred"
newline
hexmask.word 0x00 0.--10. 1. "FRNM,Frame Number"
rgroup.word 0x4E++0x01
line.word 0x00 "UFRMNUM,Frame Number Register"
bitfld.word 0x00 0.--2. "UFRNM,Microframe Number" "0,1,2,3,4,5,6,7"
rgroup.word 0x50++0x01
line.word 0x00 "USBADDR,USB Address Register"
hexmask.word.byte 0x00 0.--6. 1. "USBADDR,USB Address"
rgroup.word 0x54++0x01
line.word 0x00 "USBREQ,USB Request Type Register"
hexmask.word.byte 0x00 8.--15. 1. "BREQUEST,Request"
hexmask.word.byte 0x00 0.--7. 1. "BMREQUESTTYPE,Request Type"
rgroup.word 0x56++0x01
line.word 0x00 "USBVAL,USB Request Value Register"
hexmask.word 0x00 0.--15. 1. "WVALUE,Value"
rgroup.word 0x58++0x01
line.word 0x00 "USBINDX,USB Request Index Register"
hexmask.word 0x00 0.--15. 1. "WINDEX,Index"
rgroup.word 0x5A++0x01
line.word 0x00 "USBLENG,USB Request Length Register"
hexmask.word 0x00 0.--15. 1. "WLENGTH,Length"
group.word 0x5C++0x01
line.word 0x00 "DCPCFG,DCP Configuration Register"
bitfld.word 0x00 8. "CNTMD,Continuous Transfer Mode" "0: Continuous transfer mode disabled,1: Continuous transfer mode enabled"
bitfld.word 0x00 7. "SHTNAK,Disabling PIPE at the End of Transfer" "0: The pipe continues at the end of transfer,1: The pipe is disabled at the end of transfer"
group.word 0x5E++0x01
line.word 0x00 "DCPMAXP,DCP Maximum Packet Size Register"
hexmask.word.byte 0x00 0.--6. 1. "MXPS,Maximum Packet Size"
group.word 0x60++0x01
line.word 0x00 "DCPCTR,DCP Control Register"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access disabled,1: Buffer access enabled"
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
newline
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
rbitfld.word 0x00 6. "SQMON,Sequence Toggle Bit Monitor" "0: DATA0,1: DATA1"
newline
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being used by the USB bus,1: The pipe is being used by the USB bus"
bitfld.word 0x00 2. "CCPL,Control Transfer End Enable" "0: End of the control transfer disabled,1: End of the control transfer enabled"
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
group.word 0x64++0x01
line.word 0x00 "PIPESEL,Pipe Window Select Register"
bitfld.word 0x00 0.--3. "PIPESEL,Pipe Window Select" "0: No pipe selected,1: Pipe 1,2: Pipe 2,3: Pipe 3,4: Pipe 4,5: Pipe 5,6: Pipe 6,7: Pipe 7,8: Pipe 8,9: Pipe 9,?..."
group.word 0x68++0x01
line.word 0x00 "PIPECFG,Pipe Configuration Register"
bitfld.word 0x00 14.--15. "TYPE,Transfer Type" "0: Pipe is not in use,1: Bulk transfer,2: Interrupt transfer,3: Isochronous transfer"
bitfld.word 0x00 10. "BFRE,BRDY Interrupt Operation Specification" "0: BRDY interrupt notification upon transmitting..,1: BRDY interrupt notification upon reading data"
newline
bitfld.word 0x00 9. "DBLB,Double Buffer Mode" "0: Single-buffer operation,1: Double-buffer operation"
bitfld.word 0x00 8. "CNTMD,Continuous Transfer Mode" "0: Non-continuous transfer mode,1: Continuous transfer mode"
newline
bitfld.word 0x00 7. "SHTNAK,Pipe Disable at the End of Transfer" "0: Pipe continued at end of transfer,1: Pipe disabled at end of transfer"
bitfld.word 0x00 4. "DIR,Transfer Direction" "0: Receiving direction,1: Transmitting direction"
newline
bitfld.word 0x00 0.--3. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x6A++0x01
line.word 0x00 "PIPEBUF,Pipe Buffer Specification Register"
bitfld.word 0x00 10.--14. "BUFSIZE,Buffer size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word.byte 0x00 0.--7. 1. "BUFNMB,Buffer number"
group.word 0x6C++0x01
line.word 0x00 "PIPEMAXP,Pipe Maximum Packet Size Register"
hexmask.word 0x00 0.--10. 1. "MXPS,Maximum Packet Size"
group.word 0x6E++0x01
line.word 0x00 "PIPEPERI,Pipe Timing Control Register"
bitfld.word 0x00 12. "IFIS,Isochronous IN Buffer Flush" "0: The buffer is not flushed,1: The buffer is flushed"
bitfld.word 0x00 0.--2. "IITV,Interval Error Detection Spacing" "0,1,2,3,4,5,6,7"
group.word 0x70++0x01
line.word 0x00 "PIPECTR,PIPE"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access is disabled,1: Buffer access is enabled"
rbitfld.word 0x00 14. "INBUFM,Transfer Buffer Monitor" "0: FIFO buffer contains no transmittable data,1: FIFO buffer contains transmittable data"
newline
bitfld.word 0x00 10. "ATREPM,Auto Response Mode" "0: Disabled,1: Enabled (a zero-length packet response while.."
bitfld.word 0x00 9. "ACLRM,Auto Buffer Clear Mode" "0: Disabled,1: Enabled (all buffers are initialized)"
newline
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
newline
rbitfld.word 0x00 6. "SQMON,Toggle Bit Confirm" "0: DATA0,1: DATA1"
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being currently used for the..,1: The pipe is being currently used for the USB.."
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
group.word 0x72++0x01
line.word 0x00 "PIPE1CTR,PIPE"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access is disabled,1: Buffer access is enabled"
rbitfld.word 0x00 14. "INBUFM,Transfer Buffer Monitor" "0: FIFO buffer contains no transmittable data,1: FIFO buffer contains transmittable data"
newline
bitfld.word 0x00 10. "ATREPM,Auto Response Mode" "0: Disabled,1: Enabled (a zero-length packet response while.."
bitfld.word 0x00 9. "ACLRM,Auto Buffer Clear Mode" "0: Disabled,1: Enabled (all buffers are initialized)"
newline
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
newline
rbitfld.word 0x00 6. "SQMON,Toggle Bit Confirm" "0: DATA0,1: DATA1"
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being currently used for the..,1: The pipe is being currently used for the USB.."
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
group.word 0x74++0x01
line.word 0x00 "PIPE2CTR,PIPE"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access is disabled,1: Buffer access is enabled"
rbitfld.word 0x00 14. "INBUFM,Transfer Buffer Monitor" "0: FIFO buffer contains no transmittable data,1: FIFO buffer contains transmittable data"
newline
bitfld.word 0x00 10. "ATREPM,Auto Response Mode" "0: Disabled,1: Enabled (a zero-length packet response while.."
bitfld.word 0x00 9. "ACLRM,Auto Buffer Clear Mode" "0: Disabled,1: Enabled (all buffers are initialized)"
newline
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
newline
rbitfld.word 0x00 6. "SQMON,Toggle Bit Confirm" "0: DATA0,1: DATA1"
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being currently used for the..,1: The pipe is being currently used for the USB.."
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
group.word 0x76++0x01
line.word 0x00 "PIPE3CTR,PIPE"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access is disabled,1: Buffer access is enabled"
rbitfld.word 0x00 14. "INBUFM,Transfer Buffer Monitor" "0: FIFO buffer contains no transmittable data,1: FIFO buffer contains transmittable data"
newline
bitfld.word 0x00 10. "ATREPM,Auto Response Mode" "0: Disabled,1: Enabled (a zero-length packet response while.."
bitfld.word 0x00 9. "ACLRM,Auto Buffer Clear Mode" "0: Disabled,1: Enabled (all buffers are initialized)"
newline
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
newline
rbitfld.word 0x00 6. "SQMON,Toggle Bit Confirm" "0: DATA0,1: DATA1"
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being currently used for the..,1: The pipe is being currently used for the USB.."
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
group.word 0x78++0x01
line.word 0x00 "PIPE4CTR,PIPE"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access is disabled,1: Buffer access is enabled"
rbitfld.word 0x00 14. "INBUFM,Transfer Buffer Monitor" "0: FIFO buffer contains no transmittable data,1: FIFO buffer contains transmittable data"
newline
bitfld.word 0x00 10. "ATREPM,Auto Response Mode" "0: Disabled,1: Enabled (a zero-length packet response while.."
bitfld.word 0x00 9. "ACLRM,Auto Buffer Clear Mode" "0: Disabled,1: Enabled (all buffers are initialized)"
newline
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
newline
rbitfld.word 0x00 6. "SQMON,Toggle Bit Confirm" "0: DATA0,1: DATA1"
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being currently used for the..,1: The pipe is being currently used for the USB.."
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
repeat 4. (strings "" "" "" "" )(list 0x0 0x2 0x4 0x6 )
group.word ($2+0x7A)++0x01
line.word 0x00 "PIPECTR$1,PIPE $1"
rbitfld.word 0x00 15. "BSTS,Buffer Status" "0: Buffer access is disabled,1: Buffer access is enabled"
bitfld.word 0x00 9. "ACLRM,Auto Buffer Clear Mode" "0: Disabled,1: Enabled (all buffers are initialized)"
newline
bitfld.word 0x00 8. "SQCLR,Toggle Bit Clear" "0: Writing has no effect,1: Specifies DATA0"
bitfld.word 0x00 7. "SQSET,Toggle Bit Set" "0: Writing has no effect,1: Specifies DATA1"
newline
rbitfld.word 0x00 6. "SQMON,Toggle Bit Confirm" "0: DATA0,1: DATA1"
rbitfld.word 0x00 5. "PBUSY,PIPE Busy" "0: The pipe is not being currently used for the..,1: The pipe is being currently used for the USB.."
newline
bitfld.word 0x00 0.--1. "PID,Response PID" "0: NAK response,1: BUF response (depending on the buffer state),2: STALL response,3: STALL response"
repeat.end
group.word 0x90++0x01
line.word 0x00 "PIPETRE,PIPE"
bitfld.word 0x00 9. "TRENB,Transaction Counter Enable" "0: The transaction counter is disabled,1: The transaction counter is enabled"
bitfld.word 0x00 8. "TRCLR,Transaction Counter Clear" "0: Invalid,1: The current counter value is cleared"
group.word 0x94++0x01
line.word 0x00 "PIPE1TRE,PIPE"
bitfld.word 0x00 9. "TRENB,Transaction Counter Enable" "0: The transaction counter is disabled,1: The transaction counter is enabled"
bitfld.word 0x00 8. "TRCLR,Transaction Counter Clear" "0: Invalid,1: The current counter value is cleared"
group.word 0x98++0x01
line.word 0x00 "PIPE2TRE,PIPE"
bitfld.word 0x00 9. "TRENB,Transaction Counter Enable" "0: The transaction counter is disabled,1: The transaction counter is enabled"
bitfld.word 0x00 8. "TRCLR,Transaction Counter Clear" "0: Invalid,1: The current counter value is cleared"
group.word 0x9C++0x01
line.word 0x00 "PIPE3TRE,PIPE"
bitfld.word 0x00 9. "TRENB,Transaction Counter Enable" "0: The transaction counter is disabled,1: The transaction counter is enabled"
bitfld.word 0x00 8. "TRCLR,Transaction Counter Clear" "0: Invalid,1: The current counter value is cleared"
group.word 0xA0++0x01
line.word 0x00 "PIPE4TRE,PIPE"
bitfld.word 0x00 9. "TRENB,Transaction Counter Enable" "0: The transaction counter is disabled,1: The transaction counter is enabled"
bitfld.word 0x00 8. "TRCLR,Transaction Counter Clear" "0: Invalid,1: The current counter value is cleared"
group.word 0x92++0x01
line.word 0x00 "PIPETRN,PIPE"
hexmask.word 0x00 0.--15. 1. "TRNCNT,Transaction Counter"
group.word 0x96++0x01
line.word 0x00 "PIPE1TRN,PIPE"
hexmask.word 0x00 0.--15. 1. "TRNCNT,Transaction Counter"
group.word 0x9A++0x01
line.word 0x00 "PIPE2TRN,PIPE"
hexmask.word 0x00 0.--15. 1. "TRNCNT,Transaction Counter"
group.word 0x9E++0x01
line.word 0x00 "PIPE3TRN,PIPE"
hexmask.word 0x00 0.--15. 1. "TRNCNT,Transaction Counter"
group.word 0xA2++0x01
line.word 0x00 "PIPE4TRN,PIPE"
hexmask.word 0x00 0.--15. 1. "TRNCNT,Transaction Counter"
group.word 0x102++0x01
line.word 0x00 "LPSTS,Low Power Status Register"
bitfld.word 0x00 14. "SUSPM,UTMI SuspendM Control" "0: UTMI suspend mode,1: UTMI normal mode"
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x400)++0x03
line.long 0x00 "N0SA_$1,Next Source Address Register"
hexmask.long 0x00 0.--31. 1. "SAWD,Source Address or Write Data"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x404)++0x03
line.long 0x00 "N0DA_$1,Next Destination Address Register"
hexmask.long 0x00 0.--31. 1. "DA,Destination Address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x408)++0x03
line.long 0x00 "N0TB_$1,Next Transaction Byte Register"
hexmask.long 0x00 0.--31. 1. "TB,Transaction Byte"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x40C)++0x03
line.long 0x00 "N1SA_$1,Next Source Address Register"
hexmask.long 0x00 0.--31. 1. "SAWD,Source Address or Write Data"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x410)++0x03
line.long 0x00 "N1DA_$1,Next Destination Address Register"
hexmask.long 0x00 0.--31. 1. "DA,Destination Address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x414)++0x03
line.long 0x00 "N1TB_$1,Next Transaction Byte Register"
hexmask.long 0x00 0.--31. 1. "TB,Transaction Byte"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
rgroup.long ($2+0x418)++0x03
line.long 0x00 "CRSA_$1,Current Source Address Register"
hexmask.long 0x00 0.--31. 1. "CRSA,Source Address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
rgroup.long ($2+0x41C)++0x03
line.long 0x00 "CRDA_$1,Current Destination Address Register"
hexmask.long 0x00 0.--31. 1. "CRDA,Destination Address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
rgroup.long ($2+0x420)++0x03
line.long 0x00 "CRTB_$1,Current Transaction Byte Register"
hexmask.long 0x00 0.--31. 1. "CRTB,Transaction Byte"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
rgroup.long ($2+0x424)++0x03
line.long 0x00 "CHSTAT_$1,Channel Status Register"
hexmask.long.byte 0x00 24.--31. 1. "DNUM,Data Number"
bitfld.long 0x00 18. "SWPRQ,Sweep Request" "0: The forced ejection request is not asserted,1: The forced ejection request is asserted"
newline
bitfld.long 0x00 17. "DMARQM,DMAREQ Mask" "0: The temporary mask status is cleared,1: In temporary mask status"
bitfld.long 0x00 16. "INTM,Interrupt Mask" "0: The temporary mask status is cleared,1: In temporary mask status"
newline
bitfld.long 0x00 11. "MODE,DMA Mode" "0: Register mode,1: Link mode"
bitfld.long 0x00 10. "DER,Descriptor Error" "0: No descriptor error occurred,1: A descriptor error occurred"
newline
bitfld.long 0x00 9. "DW,Descriptor WriteBack" "0: Other than header write-back in link mode,1: (When ER in the CHSTAT_n register is 0).."
bitfld.long 0x00 8. "DL,Descriptor Load" "0: Other than descriptor read,1: (When ER = 0) While the descriptor is read in.."
newline
bitfld.long 0x00 7. "SR,Selected Register Set" "0: Next0 register set,1: Next1 register set"
bitfld.long 0x00 6. "TC,Terminal Count" "0: DMA transfer not completed,1: DMA transfer completed"
newline
bitfld.long 0x00 5. "END,USB_FDMAn Interrupted" "0: DMA transfer not completed,1: DMA transfer completed"
bitfld.long 0x00 4. "ER,Error" "0: No error response was received,1: An error response was received"
newline
bitfld.long 0x00 3. "SUS,Suspend" "0: Channel_n is not suspended,1: Channel_n is suspended"
bitfld.long 0x00 2. "TACT,Transaction Active" "0: DMA of channel_n is inactive,1: DMA of channel_n is in progress"
newline
bitfld.long 0x00 1. "RQST,Request" "0: No DMA transfer request has been received,1: A DMA transfer request has been received"
bitfld.long 0x00 0. "EN,Enable" "0: Operation disabled,1: Operation enabled"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
wgroup.long ($2+0x428)++0x03
line.long 0x00 "CHCTRL_$1,Channel Control Register"
bitfld.long 0x00 19. "CLRDMARQM,Clear DMAREQ Mask" "0: No effect,1: Clears the mask status set by the SETDMARQM bit"
bitfld.long 0x00 18. "SETDMARQM,SET DMAREQ Mask" "0: No effect,1: Masks a DMA transfer request from the USB.."
newline
bitfld.long 0x00 17. "CLRINTM,Clear Interrupt Mask" "0: No effect,1: Clears the mask status set by the SETINTM bit"
bitfld.long 0x00 16. "SETINTM,Set Interrupt Mask" "0: No effect,1: Masks USB_FDMAn"
newline
bitfld.long 0x00 14. "SETSSWPRQ,Set Software Sweep Request" "0: No effect,1: Writes the buffer data (that has not been.."
bitfld.long 0x00 12. "SETREN,Set Register Set Enable" "0: No effect,1: Sets the REN bit in the CHCFG_n register to 1"
newline
bitfld.long 0x00 9. "CLRSUS,Clear Suspend" "0: No effect,1: Clears the suspended status of the ongoing.."
bitfld.long 0x00 8. "SETSUS,Set Suspend" "0: No effect,1: Suspends the ongoing DMA transfer"
newline
bitfld.long 0x00 7. "CLRDER,Clear DER" "0: No effect,1: Clears the DER bit in the CHSTAT_n register"
bitfld.long 0x00 6. "CLRTC,Clear TC" "0: No effect,1: Clears the TC bit in the CHSTAT_n register"
newline
bitfld.long 0x00 5. "CLREND,Clear End" "0: No effect,1: Clears the END bit in the CHSTAT_n register"
bitfld.long 0x00 4. "CLRRQ,Clear Request" "0: No effect,1: Clears the RQST bit in the CHSTAT_n register"
newline
bitfld.long 0x00 3. "SWRST,Software Reset" "0: No effect,1: Clears each bit in the CHSTAT_n register"
bitfld.long 0x00 2. "STG,Software Trigger" "0: No effect,1: A transfer request is set by software"
newline
bitfld.long 0x00 1. "CLREN,Clear Enable" "0: No effect,1: DMA transfer is disabled"
bitfld.long 0x00 0. "SETEN,Set Enable" "0: No effect,1: DMA transfer is enabled"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x42C)++0x03
line.long 0x00 "CHCFG_$1,Channel Configuration Register"
bitfld.long 0x00 31. "DMS,DMA Mode Select" "0: Register mode (initial value),1: Link mode"
bitfld.long 0x00 30. "REN,Register Set Enable" "0: Does not perform DMA transaction continuously,1: Performs DMA transaction continuously"
newline
bitfld.long 0x00 29. "RSW,Register Select Switch" "0: Does not reverse the RSEL bit upon completion..,1: Reverses the RSEL bit upon completion of a.."
bitfld.long 0x00 28. "RSEL,Register Set Select" "0: Executes Next0 register set (initial value),1: Executes Next1 register set"
newline
bitfld.long 0x00 27. "SBE,Sweep Buffer Enable" "0: Does not sweep buffer data and aborts the..,1: Sweeps buffer data and aborts the transfer"
bitfld.long 0x00 26. "DIM,Descriptor Interrupt Mask" "0: Does not mask USB_FDMAn (initial value),1: Masks USB_FDMAn"
newline
bitfld.long 0x00 24. "DEM,USB_FDMAn Mask" "0: Does not mask USB_FDMAn interrupt detection..,1: Masks USB_FDMAn interrupt detection"
bitfld.long 0x00 23. "WONLY,Write Only Mode" "0: Normal operation (initial value),1: Write-only mode"
newline
bitfld.long 0x00 22. "TM,Sets the transfer request signal between the USB control and the DMAC" "0,1"
bitfld.long 0x00 21. "DAD,Destination Address Direction" "0: Increment (initial value),1: Fixed"
newline
bitfld.long 0x00 20. "SAD,Source Address Direction" "0: Increment (initial value),1: Fixed"
bitfld.long 0x00 16.--19. "DDS,Destination Data Size" "0: 8 bits (initial value),1: 16 bits,2: 32 bits,3: 64 bits,4: 128 bits,5: 256 bits,6: 512 bits,7: 1024 bits,?..."
newline
bitfld.long 0x00 12.--15. "SDS,Source Data Size" "0: 8 bits (initial value),1: 16 bits,2: 32 bits,3: 64 bits,4: 128 bits,5: 256 bits,6: 512 bits,7: 1024 bits,?..."
bitfld.long 0x00 11. "DRRP,Descriptor Read Repeat" "0: Sets the DER bit in the CHSTAT_n register to..,1: Reads the same descriptor continuously until.."
newline
bitfld.long 0x00 8.--10. "AM,These bits set the transfer request signal between the USB control and the DMAC" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "LVL,Sets the transfer request signal between the USB control and the DMAC" "0,1"
newline
bitfld.long 0x00 5. "HIEN,Sets the transfer request signal between the USB control and the DMAC" "0,1"
bitfld.long 0x00 4. "LOEN,Sets the transfer request signal between the USB control and the DMAC" "0,1"
newline
bitfld.long 0x00 3. "REQD,Request Direction" "0: The USB control side is source (initial value),1: The USB control side is destination"
bitfld.long 0x00 0. "SEL,Terminal Select" "0: D0FIFO is used,1: D1FIFO is used"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x430)++0x03
line.long 0x00 "CHITVL_$1,Channel Interval Register"
hexmask.long.word 0x00 0.--15. 1. "ITVL,Interval"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x434)++0x03
line.long 0x00 "CHEXT_$1,Channel Extension Register"
bitfld.long 0x00 8.--11. "DPR,Destination PROT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "SPR,Source PROT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
group.long ($2+0x438)++0x03
line.long 0x00 "NXLA_$1,Next Link Address Register"
hexmask.long 0x00 0.--31. 1. "NXLA,Next Link Address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x40 )
rgroup.long ($2+0x43C)++0x03
line.long 0x00 "CRLA_$1,Current Link Address Register"
hexmask.long 0x00 0.--31. 1. "CRLA,Current Link Address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x600)++0x03
line.long 0x00 "SCNT_$1,Source Continuous Register"
hexmask.long 0x00 0.--31. 1. "SCNT,Source Continuous"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x604)++0x03
line.long 0x00 "SSKP_$1,Source Skip Register"
hexmask.long 0x00 0.--31. 1. "SSKP,Source Skip"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x608)++0x03
line.long 0x00 "DCNT_$1,Destination Continuous Register"
hexmask.long 0x00 0.--31. 1. "DCNT,Destination Continuous"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x60C)++0x03
line.long 0x00 "DSKP_$1,Destination Skip Register"
hexmask.long 0x00 0.--31. 1. "DSKP,Destination Skip"
repeat.end
group.long 0x700++0x03
line.long 0x00 "DCTRL,DMA Control Register"
bitfld.long 0x00 24.--27. "LWPR,Link WriteBack PROT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "LDPR,Link Descriptor PROT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "PR,Priority" "0: Fixed priority mode,1: Round-robin mode"
group.long 0x704++0x03
line.long 0x00 "DSCITVL,Descriptor Interval Register"
hexmask.long.byte 0x00 8.--15. 1. "DITVL,Descriptor Interval"
rgroup.long 0x710++0x03
line.long 0x00 "DSTAT_EN,DMA Status EN Register"
bitfld.long 0x00 1. "EN1,Channel 1 EN" "0,1"
bitfld.long 0x00 0. "EN0,Channel 0 EN" "0,1"
rgroup.long 0x714++0x03
line.long 0x00 "DSTAT_ER,DMA Status ER Register"
bitfld.long 0x00 1. "ER1,Channel 1 ER" "0,1"
bitfld.long 0x00 0. "ER0,Channel 0 ER" "0,1"
rgroup.long 0x718++0x03
line.long 0x00 "DSTAT_END,DMA Status END Register"
bitfld.long 0x00 1. "END1,Channel 1 END" "0,1"
bitfld.long 0x00 0. "END0,Channel 0 END" "0,1"
rgroup.long 0x71C++0x03
line.long 0x00 "DSTAT_TC,DMA Status TC Register"
bitfld.long 0x00 1. "TC1,Channel 1 TC" "0,1"
bitfld.long 0x00 0. "TC0,Channel 0 TC" "0,1"
rgroup.long 0x720++0x03
line.long 0x00 "DSTAT_SUS,DMA Status SUS Register"
bitfld.long 0x00 1. "SUS1,Channel 1 SUS" "0,1"
bitfld.long 0x00 0. "SUS0,Channel 0 SUS" "0,1"
tree.end
tree "USBHC (USB 2.0 HS Host Module)"
base ad:0x80200000
rgroup.long 0x00++0x03
line.long 0x00 "HCREVISION,HcRevision Register"
hexmask.long.byte 0x00 0.--7. 1. "REV,HCI revision"
group.long 0x04++0x03
line.long 0x00 "HCCONTROL,HcControl Register"
bitfld.long 0x00 10. "RWE,PME assertion control (RemoteWakeUpEnable)" "0,1"
bitfld.long 0x00 9. "RWC,Remote Wakeup support setting (RemoteWakeUpConnect)" "0: Remote Wakeup is not supported,1: Remote Wakeup is supported"
newline
bitfld.long 0x00 8. "IR,HcInterruptStatus interrupt path setting (InterruptRouting)" "0,1"
bitfld.long 0x00 6.--7. "HCFS,Host logic operation status (Host Controller FunctionalState)" "0: USB Reset,1: USB Resume,2: USB Operational,3: USB Suspend"
newline
bitfld.long 0x00 5. "BLE,Bulk list processing setting (BulkListEnable)" "0: Bulk list processing is not done,1: Bulk list processing is done"
bitfld.long 0x00 4. "CLE,Control list processing setting (ControlListEnable)" "0: Control list processing is not done,1: Control list processing is done"
newline
bitfld.long 0x00 3. "IE,Isochronous ED processing setting (IsochronousEnable)" "0: Isochronous ED processing is enabled,1: Isochronous ED processing is disabled"
bitfld.long 0x00 2. "PLE,Periodic list setting (PeriodicListEnable)" "0: Periodic list processing is not done,1: Period list processing is done"
newline
bitfld.long 0x00 0.--1. "CBSR,Control/bulk transfer service ratio (ControlBulkServiceRatio)" "0,1,2,3"
group.long 0x08++0x03
line.long 0x00 "HCCOMMANDSTATUS,HcCommandStatus Register"
rbitfld.long 0x00 16.--17. "SOC,Schedule overrun count (Scheduling OverrunCount)" "0,1,2,3"
bitfld.long 0x00 3. "OCR,Host logic control right change (OwnershipChangeRequest)" "0,1"
newline
bitfld.long 0x00 2. "BLF,Bulk list TD (BulkListFilled)" "0: TD exists in the bulk list,1: TD does not exist in the bulk list"
bitfld.long 0x00 1. "CLF,Control list TD (ControlList Filled)" "0: TD exists in the control list,1: TD does not exist in the control list"
newline
bitfld.long 0x00 0. "HCR,Host logic software reset start (HostController Reset)" "0,1"
group.long 0x0C++0x03
line.long 0x00 "HCINTERRUPTSTATUS,HcInterruptStatus Register"
bitfld.long 0x00 30. "OC,Host logic control right change (OwnershipChange)" "0,1"
bitfld.long 0x00 6. "RHSC,HcRhStatus/HcRhPortStatus register status (RootHubStatus Change)" "0: No RHSC interrupt has occurred,1: RHSC interrupt has occurred"
newline
bitfld.long 0x00 5. "FNO,FrameNumber bit MSB change (Frame Number Overflow)" "0: No FNO interrupt has occurred,1: FNO interrupt has occurred"
bitfld.long 0x00 4. "UE,USB non-related system error detection (Unrecoverable Error)" "0: No UE interrupt has occurred,1: UE interrupt has occurred"
newline
bitfld.long 0x00 3. "RD,Resume detection (Resume Detected)" "0: No RD interrupt has occurred,1: RD interrupt has occurred"
bitfld.long 0x00 2. "SF,HccaFrameNumber update (StartOfFrame)" "0: No SF interrupt has occurred,1: SF interrupt has occurred"
newline
bitfld.long 0x00 1. "WDH,Host logic HccaDoneHead update (Writeback Done Head)" "0: No WDH interrupt has occurred,1: WDH interrupt has occurred"
bitfld.long 0x00 0. "SO,USB schedule overrun (Scheduling Overrun)" "0: No SO interrupt has occurred,1: SO interrupt has occurred"
group.long 0x10++0x03
line.long 0x00 "HCINTERRUPTENABLE,HcInterruptEnable Register"
bitfld.long 0x00 31. "MIE,Interrupt 8 source enable (MasterInterrupt Enable)" "0: No monitoring and nothing is to be done,1: The specified interrupt is enabled"
bitfld.long 0x00 30. "OCE,OC interrupt source enable (OwnershipChangeEnable)" "0: No monitoring and nothing is to be done,1: OC interrupt is enabled"
newline
bitfld.long 0x00 6. "RHSCE,RHSC interrupt source enable (RootHubStatus ChangeEnable)" "0: No monitoring and nothing is to be done,1: RHSC interrupt is enabled"
bitfld.long 0x00 5. "FNOE,FNO interrupt source enable (FrameNumber OverflowEnable)" "0: No monitoring and nothing is to be done,1: FNO interrupt is enabled"
newline
bitfld.long 0x00 4. "UEE,UE interrupt source enable (Unrecoverable ErrorEnable)" "0: No monitoring and nothing is to be done,1: UE interrupt is enabled"
bitfld.long 0x00 3. "RDE,RD interrupt source enable (Resume DetectedEnable)" "0: No monitoring and nothing is to be done,1: RD interrupt is enabled"
newline
bitfld.long 0x00 2. "SFE,SF interrupt source enable (StartOfFrame)" "0: No monitoring and nothing is to be done,1: SF interrupt is enabled"
bitfld.long 0x00 1. "WDHE,WDH interrupt source enable (WritebackDone HeadEnable)" "0: No monitoring and nothing is to be done,1: WDH interrupt is enabled"
newline
bitfld.long 0x00 0. "SOE,SO interrupt source enable (Scheduling OverrunEnable)" "0: No monitoring and nothing is to be done,1: SO interrupt is enabled"
group.long 0x14++0x03
line.long 0x00 "HCINTERRUPTDISABLE,HcInterruptDisable Register"
bitfld.long 0x00 31. "MID,Interrupt 8 source disable (Master Interrupt Disable)" "0: Nothing is to be done,1: The interrupt set is disabled"
bitfld.long 0x00 30. "OCD,OC interrupt source disable (OwnershipChangeDisable)" "0: Nothing is to be done,1: OC is deleted from the interrupt sources"
newline
bitfld.long 0x00 6. "RHSCD,RHSC interrupt source disable (RootHub StatusChange Disable)" "0: Nothing is to be done,1: The interrupt source RHSC is disabled"
bitfld.long 0x00 5. "FNOD,FNO interrupt source disable (FrameNumberOverflow Disable)" "0: Nothing is to be done,1: The interrupt source FNO is disabled"
newline
bitfld.long 0x00 4. "UED,UE interrupt source disable (Unrecoverable ErrorDisable)" "0: Nothing is to be done,1: The interrupt source UE is disabled"
bitfld.long 0x00 3. "RDD,RD interrupt source disable (Resume Detected Disable)" "0: Nothing is to be done,1: The interrupt source RD is disabled"
newline
bitfld.long 0x00 2. "SFD,SF interrupt source disable (StartOfFrame Disable)" "0: Nothing is to be done,1: The interrupt source SF is disabled"
bitfld.long 0x00 1. "WDHD,WDH interrupt source disable (Writeback DoneHead Disable)" "0: Nothing is to be done,1: The interrupt source WDH is disabled"
newline
bitfld.long 0x00 0. "SOD,SO interrupt source disable (Scheduling Overrun Disable)" "0: Nothing is to be done,1: The interrupt source SO is disabled"
group.long 0x18++0x03
line.long 0x00 "HCHCCA,HcHCCA Register"
hexmask.long.tbyte 0x00 8.--31. 1. "RAMBA,RAM base address setting"
rgroup.long 0x1C++0x03
line.long 0x00 "HCPERIODCCURRENTIED,HcPeriodicCurrentED Register"
hexmask.long 0x00 4.--31. 1. "PCED,ED physical address (PeriodicCurrentED)"
group.long 0x20++0x03
line.long 0x00 "HCCONTROLHEADED,HcControlHeadED Register"
hexmask.long 0x00 4.--31. 1. "CHED,Start ED physical address (ControlHeadED)"
group.long 0x24++0x03
line.long 0x00 "HCCONTROLCURRENTED,HcControlCurrentED Register"
hexmask.long 0x00 4.--31. 1. "CCED,ED physical address (ControlCurrentED)"
group.long 0x28++0x03
line.long 0x00 "HCBULKHEADED,HcBulkHeadED Register"
hexmask.long 0x00 4.--31. 1. "BHED,Start ED physical address (BulkHeadED)"
group.long 0x2C++0x03
line.long 0x00 "HCBULKCURRENTED,HcBulkCurrentED Register"
hexmask.long 0x00 4.--31. 1. "BCED,ED physical address (BulkCurrentED)"
rgroup.long 0x30++0x03
line.long 0x00 "HCDONEHEAD,HcDoneHead Register"
hexmask.long 0x00 4.--31. 1. "DH,HcDoneHead physical address (DoneHead)"
group.long 0x34++0x03
line.long 0x00 "HCFMINTERVAL,HcFmInterval Register"
bitfld.long 0x00 31. "FIT,Frame synchronization (FrameInterval Toggle)" "0,1"
hexmask.long.word 0x00 16.--30. 1. "FSMPS,FS transfer packet maximum size setting (FSLagest DataPacket)"
newline
hexmask.long.word 0x00 0.--13. 1. "FI,Frame interval setting (FrameInterval)"
rgroup.long 0x38++0x03
line.long 0x00 "HCFNREMAINING,HcFmRemaining Register"
bitfld.long 0x00 31. "FRT,Frame synchronization (FrameRemainingToggle)" "0,1"
hexmask.long.word 0x00 0.--13. 1. "FR,Down counter frame (FrameRemaining)"
rgroup.long 0x3C++0x03
line.long 0x00 "HCFMNUMBER,HcFmNumber Register"
hexmask.long.word 0x00 0.--15. 1. "FN,Elapsed frame number (FrameNumber)"
group.long 0x40++0x03
line.long 0x00 "HCPERIODSTART,HcPeriodicStart Register"
hexmask.long.word 0x00 0.--13. 1. "PS,Periodic list processing start time (PeriodicStart)"
group.long 0x44++0x03
line.long 0x00 "HCLSTHRESHOLD,HcLSThreshold Register"
hexmask.long.word 0x00 0.--11. 1. "LS,Transferrable threshold (LSThreshold)"
group.long 0x48++0x03
line.long 0x00 "HCRHDESCRIPTORA,HcRhDescriptorA Register"
hexmask.long.byte 0x00 24.--31. 1. "POTPGT,Wait time (PowerOnToPowerGood Time)"
bitfld.long 0x00 12. "NOCP,Overcurrent function support (NoOver Current Protection)" "0: Overcurrent protection function is supported,1: Overcurrent protection function is not.."
newline
bitfld.long 0x00 11. "OCPM,Overcurrent state reporting (OverCurrentProtection Mode)" "0: Overcurrent state of all ports is..,1: Overcurrent state of each port is separately.."
rbitfld.long 0x00 10. "DT,Device type (DeviceType)" "0,1"
newline
bitfld.long 0x00 9. "NPS,Power control (NoPower Switching)" "0: Port power can be switched on and off,1: Port power is always turned on while the host.."
bitfld.long 0x00 8. "PSM,Power switch control (PowerSwitchingMode)" "0: Power to all ports is controlled together,1: Power to each port is separately controlled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NDP,Downstream port number (NumberDownstreamPorts)"
group.long 0x4C++0x03
line.long 0x00 "HCRHDESCRIPTORB,HcRhDescriptorB Register"
hexmask.long.word 0x00 16.--31. 1. "PPCM,Port Power Control Mask"
hexmask.long.word 0x00 0.--15. 1. "DR,Device Removable"
group.long 0x50++0x03
line.long 0x00 "HCRHSTATUS,HcRhStatus Register"
bitfld.long 0x00 31. "CRWE,DRWE bit clear (Clear Remote Wakeup Enable)" "0: No effect,1: Clears the DRWE bit"
bitfld.long 0x00 17. "OCIC,OCI bit change report (OverCurrent Indicate Change)" "0: Nothing is to be done in case of an overcurrent,1: OverCurrent state has changed"
newline
bitfld.long 0x00 16. "LPSC,Local power status change (LocalPowerStatusChange)" "0,1"
bitfld.long 0x00 15. "DRWE,Device remote start enable (DeviceRemoteWakeupEnable)" "0: ConnectStatusChange is not a RemoteWakeup..,1: ConnectStatusChange is a RemoteWakeup source"
newline
rbitfld.long 0x00 1. "OCI,Overcurrent indicator (OverCurrent Indicator)" "0: Port is in normal state,1: Port is in overcurrent state"
bitfld.long 0x00 0. "LPS,Local power status (LocalPowerStatus)" "0,1"
group.long 0x54++0x03
line.long 0x00 "HCRHPORTSTATUS1,HcRhPortStatus1 Register"
bitfld.long 0x00 20. "PRSC,Port reset complete (PortReset StatusChange)" "0: Port reset has not been completed or nothing..,1: Port reset has been completed"
bitfld.long 0x00 19. "OCIC,Overcurrent state detection (OverCurrent IndicateChange)" "0: Nothing is to be done regarding overcurrent..,1: Overcurrent state has changed"
newline
bitfld.long 0x00 18. "PSSC,RESUME sequence complete (PortSuspend StatusChange)" "0: RESUME has not been completed,1: RESUME has been completed"
bitfld.long 0x00 17. "PESC,PES bit status (PortEnable StatusChange)" "0: Nothing is to be done regarding PES,1: PES state has changed"
newline
bitfld.long 0x00 16. "CSC,CCS bit status (ConnectStatus Change)" "0: Nothing is to be done regarding CCS,1: CCS has changed"
bitfld.long 0x00 9. "LSDA,Device speed (LowSpeedDeviceAttached)" "0: FS device is connected,1: LS device is connected"
newline
bitfld.long 0x00 8. "PPS,Power status (PortPowerStatus)" "0: Port power is off,1: Port power is on"
bitfld.long 0x00 4. "PRS,Port reset status (PortResetStatus)" "0: Port reset is not in progress,1: Port reset is in progress"
newline
rbitfld.long 0x00 3. "POCI,Downstream port overcurrent detection (PortOverCurrentIndicator)" "0: Port is in normal state,1: Port is in overcurrent state"
bitfld.long 0x00 2. "PSS,Suspend/Resume status (PortSuspendStatus)" "0: Port is in normal transfer state,1: Port is in suspend state"
newline
bitfld.long 0x00 1. "PES,Port enable status (PortEnableStatus)" "0: Port is disabled,1: Port is enabled"
bitfld.long 0x00 0. "CCS,Connection status indication (CurrentConnectStatus)" "0: No device is connected,1: Device is connected"
rgroup.long 0x100++0x03
line.long 0x00 "CAPL_VERSION,Capability Registers Length and EHCI Version Number Register"
hexmask.long.word 0x00 16.--31. 1. "HCIVN,EHCI Version Number"
hexmask.long.byte 0x00 0.--7. 1. "CRL,Capability Registers Length"
rgroup.long 0x104++0x03
line.long 0x00 "HCSPARAMS,Structural Parameters Register"
bitfld.long 0x00 20.--23. "DBGPTNUM,Debug port number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16. "P_INDICATOR,Port indicator control support" "0,1"
newline
bitfld.long 0x00 12.--15. "N_CC,Number of OHCI host logic (Number of Companion Controller)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "N_PCC,Number of ports (Number of Ports per Companion Controller)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 7. "PTRR,Port routing rules" "0,1"
bitfld.long 0x00 4. "PPC,Port power control (Port Power Control)" "0: Port power is always on,1: Port power is controlled using bit 12 (PP) in.."
newline
bitfld.long 0x00 0.--3. "N_PORTS,Number of downstream ports (Number of Ports)" "?,1: 1 port,?..."
rgroup.long 0x108++0x03
line.long 0x00 "HCCPARAMS,Capability Parameters Register"
bitfld.long 0x00 19. "PL32,32-frame periodic list capability" "0,1"
bitfld.long 0x00 18. "PCEC,Per-port change event capability" "0,1"
newline
bitfld.long 0x00 17. "LPMC,Link power management capability" "0,1"
bitfld.long 0x00 16. "HP,Hardware prefetch capability" "0,1"
newline
hexmask.long.byte 0x00 8.--15. 1. "EECP,Offset address (EHCI Extend Capabilities Pointer)"
bitfld.long 0x00 4.--7. "IST,Isochronous data structure threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2. "ASPC,Asynchronous schedule park support capability" "0,1"
bitfld.long 0x00 1. "PFLF,Programming frame list flag" "0,1"
newline
bitfld.long 0x00 0. "AC64,Memory pointer selection" "0,1"
rgroup.long 0x10C++0x03
line.long 0x00 "HCSP_PORTROUTE,Companion Port Route Description Register"
group.long 0x120++0x03
line.long 0x00 "USBCMD,USB Command Register"
bitfld.long 0x00 24.--27. "HIRD,Host-Initiated Resume Duration (Minimum K-state drive time)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 16.--23. 1. "ITC,Host logic interrupt generation maximum rate (Interrupt Threshold Control)"
newline
bitfld.long 0x00 15. "PPCEE,Per-port change event enable" "0,1"
bitfld.long 0x00 11. "ASPME,Asynchronous schedule park mode enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 8.--9. "ASPMC,Asynchronous schedule park mode count" "0,1,2,3"
rbitfld.long 0x00 7. "LHCR,Light host controller reset execution status" "0,1"
newline
bitfld.long 0x00 6. "IAAD,Interrupt on Async Advance Doorbell" "0,1"
bitfld.long 0x00 5. "ASYNSE,Asynchronous schedule enable" "0: Asynchronous list processing is not executed..,1: Asynchronous list processing is executed.."
newline
bitfld.long 0x00 4. "PSE,Periodic schedule enable" "0: Periodic list processing is not executed..,1: Periodic list processing is executed using.."
bitfld.long 0x00 2.--3. "FLS,Frame list size" "0: 1024 elements (4096 bytes),1: 512 elements (2048 bytes),2: 256 elements (1024 bytes),3: 32 elements (128 bytes)"
newline
bitfld.long 0x00 1. "HCRESET,Host logic initialization (Host Controller Reset)" "0,1"
bitfld.long 0x00 0. "RS,EHCI host logic run/stop (Run/Stop)" "0: Stopped (the host logic has completed..,1: Activated (the host logic executes the.."
group.long 0x124++0x03
line.long 0x00 "USBSTS,USB Status Register"
hexmask.long.word 0x00 16.--31. 1. "PTCGDETC,Port-n Change Detect"
rbitfld.long 0x00 15. "ASS,Asynchronous schedule status" "0: Asynchronous schedule is disabled,1: Asynchronous schedule is enabled"
newline
rbitfld.long 0x00 14. "PSCHSTS,Periodic schedule status" "0: Periodic schedule is disabled,1: Periodic schedule is enabled"
rbitfld.long 0x00 13. "RECLAM,Empty asynchronous schedule detection (Reclamation)" "0,1"
newline
rbitfld.long 0x00 12. "EHCSTS,EHCI host logic status (HCHalted)" "0: EHCI host logic is in execution,1: EHCI host logic is stopped"
bitfld.long 0x00 5. "IAAIS,Async advance interrupt status" "0: No Async Advance interrupt has occurred,1: Async Advance interrupt state has been detected"
newline
bitfld.long 0x00 4. "HSYSE,Host system error" "0: No system error has occurred,1: System error has occurred"
bitfld.long 0x00 3. "FLROV,Frame list rollover" "0: Frame list has not returned to 0x000,1: Frame list has returned to 0x000"
newline
bitfld.long 0x00 2. "PTCGDET,Port state change detection" "0,1"
bitfld.long 0x00 1. "USBERRINT,USB transaction status (USB Error Interrupt)" "0: USB transaction has been completed normally,1: USB transaction has ended with an error"
newline
bitfld.long 0x00 0. "USBINT,USB transfer complete (USB Interrupt)" "0: USB transfer has not been completed,1: USB transfer has been completed"
group.long 0x128++0x03
line.long 0x00 "USBINTR,USB Interrupt Enable Register"
hexmask.long.word 0x00 16.--31. 1. "PCGIE,Port-n Change Interrupt Enable"
bitfld.long 0x00 5. "INTAADVE,Interrupt on async advance enable" "0: Disabled,1: Enabled (interrupt indicated by the Interrupt.."
newline
bitfld.long 0x00 4. "HSEE,Host system error enable" "0: Disabled,1: Enabled (interrupt indicated by the Host.."
bitfld.long 0x00 3. "FMLSTROE,Frame list rollover enable" "0: Disabled,1: Enabled (interrupt indicated by the Frame.."
newline
bitfld.long 0x00 2. "PTCGIE,Port change interrupt enable" "0: Disabled,1: Enabled (interrupt indicated by the Port.."
bitfld.long 0x00 1. "USBEIE,USB error interrupt enable" "0: Disabled,1: Enabled (interrupt indicated by the USBERRINT.."
newline
bitfld.long 0x00 0. "USBIE,USB interrupt enable" "0: Disabled,1: Enabled (interrupt indicated by the USBINT bit)"
group.long 0x12C++0x03
line.long 0x00 "FRINDEX,USB Frame Index Register"
hexmask.long.word 0x00 0.--13. 1. "FRAMEINDEX,Frame index"
rgroup.long 0x130++0x03
line.long 0x00 "CTRLDSSEGMENT,Control Data Structure Segment Register"
group.long 0x134++0x03
line.long 0x00 "PERIODICLISTBASE,Periodic Frame List Base Address Register"
hexmask.long.tbyte 0x00 12.--31. 1. "PFLSA,Periodic frame list start address"
group.long 0x138++0x03
line.long 0x00 "ASYNCLISTADDR,Next Asynchronous List Address Register"
hexmask.long 0x00 5.--31. 1. "LPL,Asynchronous Queue Head link pointer address (Link Pointer Low)"
group.long 0x160++0x03
line.long 0x00 "CONFIGFLAG,Configure Flag Register"
bitfld.long 0x00 0. "CF,Port routing control circuit configuration flag (Configure Flag)" "0: Port routing control circuit routes each port..,1: Port routing control circuit routes each port.."
group.long 0x164++0x03
line.long 0x00 "PORTSC1,Port 1 Status and Control Register"
hexmask.long.byte 0x00 25.--31. 1. "DVADDR,USB device address"
bitfld.long 0x00 23.--24. "SUSPSTS,Suspend status" "0: Device successfully entered the L1 state (ACK..,1: Device was unable to enter the L1 state at..,2: Device does not support L1 state transitions..,3: Other than above (such as a timeout error)"
newline
bitfld.long 0x00 22. "WKOC_E,Overcurrent state detection enable (Wake on Over-current Enable)" "0,1"
bitfld.long 0x00 21. "WKDSCNNT_E,Device disconnection detection enable (Wake on Disconnect Enable)" "0,1"
newline
bitfld.long 0x00 20. "WKCNNT_E,Device connection detection enable (Wake on Connect Enable)" "0,1"
bitfld.long 0x00 16.--19. "PTTST,Pin test control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 14.--15. "PTINDCTL,As the host logic does not support the port indicator control function these bits are set to 00b" "0,1,2,3"
bitfld.long 0x00 13. "PTOWNR,Port ownership" "0: EHCI has the port ownership,1: OHCI has the port ownership"
newline
bitfld.long 0x00 12. "PP,Port Power Supply Control (Port Power)" "0: No power is supplied to the port,1: Power is supplied to the port"
rbitfld.long 0x00 10.--11. "LINESTS,D+/D logic level" "0,1,2,3"
newline
bitfld.long 0x00 9. "LPMCTL,LPM control" "0: Suspend using L2,1: Suspend using L1 (LPM)"
bitfld.long 0x00 8. "PTRST,Port reset status" "0: Port is not in reset state,1: Port is in reset state"
newline
bitfld.long 0x00 7. "SUSPEND,Port suspend" "0: Port is not in suspend state,1: Port is in suspend state"
bitfld.long 0x00 6. "FRCPTRSM,Force Port Resume (Port resume detection flag)" "0: Resume (K-state) has not been detected or..,1: Resume (K-state) has been detected or output"
newline
bitfld.long 0x00 5. "OVCC,Over-current Change" "0: Value of bit 4 (OVCACT) has not changed,1: Value of bit 4 (OVCACT) has changed"
rbitfld.long 0x00 4. "OVCACT,Port overcurrent status" "0: Port is not in overcurrent state,1: Port is in overcurrent state"
newline
bitfld.long 0x00 3. "PTESC,Port enable/disable status change" "0: Frame babble error has not occurred,1: Frame babble error has been detected"
bitfld.long 0x00 2. "PTE,Port enable/disable status" "0: Port is disabled,1: Port is enabled"
newline
bitfld.long 0x00 1. "CSC,Connect status change" "0: Value of bit 0 (Current Connect Status) has..,1: Value of bit 0 (Current Connect Status) has.."
rbitfld.long 0x00 0. "CCSTS,Port connection status" "0: No device is connected to the port,1: Device is connected to the port"
group.long 0x200++0x03
line.long 0x00 "INTENABLE,INT_ENABLE Register"
bitfld.long 0x00 4. "WAKEON_INTEN,WAKEON_INT bit control" "0: Disabled,1: Enabled"
bitfld.long 0x00 3. "UCOM_INTEN,UCOM_INT bit control" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 2. "USBH_INTBEN,USBH_INTB bit control" "0: Disabled,1: Enabled"
bitfld.long 0x00 1. "USBH_INTAEN,USBH_INTA bit control" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 0. "AHB_INTEN,AHB_INT bit control" "0: Disabled,1: Enabled"
group.long 0x204++0x03
line.long 0x00 "INTSTATUS,INT_STATUS Register"
bitfld.long 0x00 4. "WAKEON_INT,WAKEON interrupt status" "0: WAKEON interrupt has not occurred,1: WAKEON interrupt has occurred"
rbitfld.long 0x00 3. "UCOM_INT,UCOM register interrupt status" "0: UCOM register interrupt has not occurred,1: UCOM register interrupt has occurred"
newline
rbitfld.long 0x00 2. "USBH_INTB,USBH_INTB EHCI interrupt status" "0: INTB interrupt has not occurred,1: INTB interrupt has occurred"
rbitfld.long 0x00 1. "USBH_INTA,OHCI interrupt status" "0: INTA interrupt has not occurred,1: INTA interrupt has occurred"
newline
bitfld.long 0x00 0. "AHB_INT,AHB bus error indication" "0: AHB bus error has not occurred,1: AHB bus error has occurred"
group.long 0x208++0x03
line.long 0x00 "AHBBUSCTR,AHB_BUS_CTR Register"
bitfld.long 0x00 12.--15. "PROT_TYPE,These bits set MHPROT[3:0] when the AHB master interface initiates a transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8. "PROT_MODE,This bit selects the MHPROT[3:0] mode when the AHB master interface initiates a transfer" "0: Value of PROT_TYPE[3:0] is output as..,1: 0000b is set as MHPROT[3:0] for DMA transfer.."
newline
bitfld.long 0x00 4.--5. "ALIGN_ADDRESS,Address boundary setting" "0: 1-KB boundary is not exceeded when initiating..,1: 64-byte boundary is not exceeded when..,2: 32-byte boundary is not exceeded when..,3: 16-byte boundary is not exceeded when.."
bitfld.long 0x00 0.--1. "MAX_BURST_LEN,Maximum burst length" "0: INCR16,1: INCR8,2: INCR4,3: SINGLE"
group.long 0x20C++0x03
line.long 0x00 "USBCTR,USBCTR Register"
bitfld.long 0x00 2. "DIRPD,Direct transition to power-down state" "0: Normal operation,1: Direct power-down state"
bitfld.long 0x00 1. "PLL_RST,Reset of USB PHY PLL" "0: Release PLL reset,1: Assert PLL reset"
newline
bitfld.long 0x00 0. "USBH_RST,Software reset for the core" "0: Nothing occurs,1: Host logic is reset"
rgroup.long 0x300++0x03
line.long 0x00 "REVID,Revision and Core ID Register"
hexmask.long.byte 0x00 24.--31. 1. "COREID,Core ID"
hexmask.long.byte 0x00 8.--15. 1. "MAJV,Major Version"
newline
hexmask.long.byte 0x00 0.--7. 1. "MINV,Minor Version"
group.long 0x310++0x03
line.long 0x00 "OCSLPTIMSET,Overcurrent Detection/Sleep Timer Setting Register"
hexmask.long.word 0x00 20.--28. 1. "TIMER_SLEEP,Detection/Sleep Timer Setting"
hexmask.long.tbyte 0x00 0.--19. 1. "TIMER_OC,Overcurrent Timer setting"
group.long 0x800++0x03
line.long 0x00 "COMMCTRL,Common Control Register"
bitfld.long 0x00 31. "PERI,USB mode setting" "0: Host mode,1: Function mode"
group.long 0x804++0x03
line.long 0x00 "OBINTSTA,OTG-BC Interrupt Status Register"
bitfld.long 0x00 17. "DPMONCHG_STA,DPMON change status" "0: The DPMON bit of the LINECTRL1 register has..,1: The DPMON bit of the LINECTRL1 register has.."
bitfld.long 0x00 16. "DMMONCHG_STA,DMMON change status" "0: The DMMON bit of the LINECTRL1 register has..,1: The DMMON bit of the LINECTRL1 register has.."
newline
bitfld.long 0x00 3. "VBSTAINT_STA,VBUS voltage status interrupt" "0: Value of VBSTA[3:0] bits is not the same as..,1: Value of VBSTA[3:0] bits is the same as the.."
bitfld.long 0x00 2. "VBSTACHG_STA,VBSTA[3:0] change status" "0: Value of the VBSTA[3:0] bits has not changed,1: Value of the VBSTA[3:0] bits has changed"
newline
bitfld.long 0x00 1. "OCINT_STA,USB_OVRCUR assertion status" "0: USB_OVRCUR pin is not asserted (remains 1),1: USB_OVRCUR pin is asserted (change to 0)"
bitfld.long 0x00 0. "IDCHG_STA,USB_OTGID change status" "0: Value input from the USB_OTGID pin has not..,1: Value input from the USB_OTGID pin has changed"
group.long 0x808++0x03
line.long 0x00 "OBINTEN,OTG-BC Interrupt Enable Register"
bitfld.long 0x00 17. "DPMONCHG_EN,DPMONCHG_STA interrupt enable" "0: Interrupt flagged by the DPMONCHG_STA bit..,1: Interrupt flagged by the DPMONCHG_STA bit.."
bitfld.long 0x00 16. "DMMONCHG_EN,DMMONCHG_STA interrupt enable" "0: Interrupt flagged by the DMMONCHG_STA bit..,1: Interrupt flagged by the DMMONCHG_STA bit.."
newline
bitfld.long 0x00 3. "VBSTAINT_EN,VBSTAINT_STA interrupt enable" "0: Interrupt flagged by the VBSTAINT_STA bit is..,1: Interrupt flagged by the VBSTAINT_STA bit is.."
bitfld.long 0x00 2. "VBSTACHG_EN,VBSTACHG_STA interrupt enable" "0: Interrupt flagged by the VBSTACHG_STA bit is..,1: Interrupt flagged by the VBSTACHG_STA bit is.."
newline
bitfld.long 0x00 1. "OCINT_EN,OCINT_STA interrupt enable" "0: Interrupt flagged by the OCINT_STA bit is..,1: Interrupt flagged by the OCINT_STA bit is.."
bitfld.long 0x00 0. "IDCHG_EN,IDCHG_STA Interrupt enable" "0: Interrupt flagged by the IDCHG_STA bit is..,1: Interrupt flagged by the IDCHG_STA bit is.."
group.long 0x80C++0x03
line.long 0x00 "VBCTRL,VBUS Control Register"
rbitfld.long 0x00 28.--31. "VBSTA,VBUS indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 20.--23. "VBLVL,VBUS level detection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 17. "OCISEL,Overcurrent detection" "0: OCI signal that is output by the host logic..,1: Inverted signal from the USB_OVRCUR pin When.."
bitfld.long 0x00 16. "OCCLRIEN,USB_VBUSEN pin control at occurrence of overcurrent" "0: VBOUT bit is not automatically cleared if an..,1: VBOUT bit is automatically cleared if an.."
newline
bitfld.long 0x00 4. "VGPUO,USB_EXICEN pin control" "0: USB_EXICEN is driven to low,1: USB_EXICEN is driven to high"
bitfld.long 0x00 1. "VBUSENSEL,USB_VBUSEN pin control" "0: USB_VBUSEN is controlled by PPON1,1: USB_VBUSEN is controlled by VBOUT bit in this.."
newline
bitfld.long 0x00 0. "VBOUT,VBUS drive control (USB_VBUSEN pin)" "0: VBUS output is disabled,1: VBUS output is enabled"
group.long 0x810++0x03
line.long 0x00 "LINECTRL1,Line Control Port 1 Register"
bitfld.long 0x00 19. "DPRPD_EN,Enables DP_RPD to control USB bus (DP) 15 k? pulldown resistor" "0: Control of DP-side 15 k? pulldown resistor by..,1: Control of DP-side 15 k? pulldown resistor by.."
bitfld.long 0x00 18. "DP_RPD,Controls USB bus (DP) 15 k? pulldown resistor when DRPPD_EN = 1" "0: DP-side 15 k? pulldown resistor is OFF,1: DP-side 15 k? pulldown resistor is ON"
newline
bitfld.long 0x00 17. "DMRPD_EN,Enables DM_RPD to control USB bus (DM) 15 k? pulldown resistor" "0: Control of DM-side 15 k? pulldown resistor by..,1: Control of DM-side 15 k? pulldown resistor by.."
bitfld.long 0x00 16. "DM_RPD,Controls USB bus (DM) 15 k? pulldown resistor when DMPPD_EN = 1" "0: DM-side 15 k? pulldown resistor is OFF,1: DM-side 15 k? pulldown resistor is ON"
newline
rbitfld.long 0x00 3. "DPMON,Indicates a value of USB bus DP" "0,1"
rbitfld.long 0x00 2. "DMMON,Indicates a value of USB bus DM" "0,1"
newline
rbitfld.long 0x00 0. "IDMON,Indicates a value of USB_OTGID input pin" "0,1"
tree.end
tree "WDT (Watchdog Timer)"
base ad:0x80042000
group.byte 0x00++0x00
line.byte 0x00 "WDTRR,WDT Refresh Register"
group.word 0x02++0x01
line.word 0x00 "WDTCR,WDT Control Register"
bitfld.word 0x00 12.--13. "RPSS," "0: 25%,1: 50%,2: 75%,3: 100% (window start position is not specified.)"
bitfld.word 0x00 8.--9. "RPES," "0: 75%,1: 50%,2: 25%,3: 0% (window end position is not specified.)"
bitfld.word 0x00 4.--7. "CKS," "?,1: PCLKL/4,?,?,4: PCLKL/64,?,6: PCLKL/512,7: PCLKL/2048,8: PCLKL/8192,?,?,?,?,?,?,15: PCLKL/128"
newline
bitfld.word 0x00 0.--1. "TOPS," "0: 1024 cycles (0x03FF),1: 4096 cycles (0x0FFF),2: 8192 cycles (0x1FFF),3: 16384 cycles (0x3FFF)"
group.word 0x04++0x01
line.word 0x00 "WDTSR,WDT Status Register"
bitfld.word 0x00 15. "REFEF," "0: No refresh error occurred,1: Refresh error occurred"
bitfld.word 0x00 14. "UNDFF," "0: No underflow occurred,1: Underflow occurred"
hexmask.word 0x00 0.--13. 1. "CNTVAL,Down-Counter Value"
group.byte 0x06++0x00
line.byte 0x00 "WDTRCR,WDT Reset Control Register"
bitfld.byte 0x00 7. "RSTIRQS," "0: Error notification to ICU is permitted,1: Error notification to ICU is not performed"
tree.end
tree "XSPI (xSPI)"
repeat 2. (list 0. 1.) (list ad:0x80220000 ad:0x80221000)
tree "XSPI$1"
base $2
group.long 0x00++0x03
line.long 0x00 "WRAPCFG,xSPI Wrapper Configuration Register"
bitfld.long 0x00 24.--28. "DSSFTCS1,DS shift for slave1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--12. "DSSFTCS0,DS shift for slave0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x04++0x03
line.long 0x00 "COMCFG,xSPI Common Configuration Register"
bitfld.long 0x00 17. "OENEGEX,Output Enable Negating extension" "0: No extend 1 cycle Output enable,1: Extend 1 cycle Output enable"
bitfld.long 0x00 16. "OEASTEX,Output Enable Asserting extension" "0: No extend 1 cycle Output enable,1: Extend 1 cycle Output enable"
group.long 0x08++0x03
line.long 0x00 "BMCFG,xSPI Bridge Map Configuration Register"
bitfld.long 0x00 16. "PREEN,Prefetch enable" "0: Disable prefetch function,1: Enable prefetch function"
hexmask.long.byte 0x00 8.--15. 1. "MWRSIZE,Memory Write Size"
newline
bitfld.long 0x00 7. "MWRCOMB,Memory Write Combination mode" "0: Disable combination mode,1: Enable combination mode"
bitfld.long 0x00 0. "WRMD,AHB Write Response mode" "0: Return response after storing to Internal..,1: Return response after issuing write.."
repeat 2. (strings "0" "1" )(list 0x0 0x10 )
group.long ($2+0x10)++0x03
line.long 0x00 "CMCFG0CS$1,xSPI Command Map Configuration Register 0 CSn"
hexmask.long.byte 0x00 24.--31. 1. "ADDRPCD,Address Replace Code"
hexmask.long.byte 0x00 16.--23. 1. "ADDRPEN,Address Replace Enable"
newline
bitfld.long 0x00 2.--3. "ADDSIZE,Address size" "0: 1 byte (256-byte address space),1: 2 bytes (64 KB address space),2: 3 bytes (16 MB address space),3: 4 bytes (4 GB address space)"
bitfld.long 0x00 0.--1. "FFMT,Frame format" "0: Normal format,1: 8D-8D-8D profile 1.0 format,2: 8D-8D-8D profile 2.0 Command Modifier format,3: 8D-8D-8D profile 2.0 Commands with Extended.."
repeat.end
repeat 2. (strings "0" "1" )(list 0x0 0x10 )
group.long ($2+0x14)++0x03
line.long 0x00 "CMCFG1CS$1,xSPI Command Map Configuration Register 1 CSn"
bitfld.long 0x00 16.--20. "RDLATE,Read latency cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 0.--15. 1. "RDCMD,Read command"
repeat.end
repeat 2. (strings "0" "1" )(list 0x0 0x10 )
group.long ($2+0x18)++0x03
line.long 0x00 "CMCFG2CS$1,xSPI Command Map Configuration Register 2 CSn"
bitfld.long 0x00 16.--20. "WRLATE,Write latency cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 0.--15. 1. "WRCMD,Write command"
repeat.end
repeat 2. (strings "0" "1" )(list 0x0 0x4 )
group.long ($2+0x50)++0x03
line.long 0x00 "LIOCFGCS$1,xSPI Link I/O Configuration Register CSn"
bitfld.long 0x00 28.--31. "DDRSMPEX,DDR sampling window extend" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "SDRSMPSFT,SDR Sampling window shift" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 23. "SDRSMPMD,SDR Sampling mode" "0: Samples data input at falling-edge,1: Samples data input at rising-edge"
bitfld.long 0x00 22. "SDRDRV,SDR driving timing" "0: Drive at 1/2 cycle before CK rising-edge,1: Drive at CK rising-edge"
newline
bitfld.long 0x00 21. "CSNEGEX,CS negating extension" "0: No extension,1: Extend 1 cycle"
bitfld.long 0x00 20. "CSASTEX,CS asserting extension" "0: No extension,1: Extend 1 cycle"
newline
bitfld.long 0x00 16.--19. "CSMIN,CS minimum idle term" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 11. "WRMSKMD,Write mask mode" "0: Write mask disable,1: Write mask enable"
newline
bitfld.long 0x00 10. "LATEMD,Latency mode" "0,1"
hexmask.long.word 0x00 0.--9. 1. "PRTMD,Protocol mode"
repeat.end
group.long 0x60++0x03
line.long 0x00 "BMCTL0,xSPI Bridge Map Control Register 0"
bitfld.long 0x00 2.--3. "CS1ACC,AHB channel to slave1 memory area access enable" "0: Read/Write disable,1: Read enable Write disable,2: Read disable Write enable,3: Read/Write enable"
bitfld.long 0x00 0.--1. "CS0ACC,AHB channel to slave0 memory area access enable" "0: Read/Write disable,1: Read enable Write disable,2: Read disable Write enable,3: Read/Write enable"
wgroup.long 0x64++0x03
line.long 0x00 "BMCTL1,xSPI Bridge Map Control Register 1"
bitfld.long 0x00 10. "PBUFCLR,Prefetch Buffer clear" "0: No command,1: Clear request"
bitfld.long 0x00 8. "MWRPUSH,Memory Write Data Push" "0: No command,1: Push request"
group.long 0x68++0x03
line.long 0x00 "CMCTL,xSPI Command Map Control Register"
bitfld.long 0x00 16. "XIPEN,XiP mode enable" "0: Disable XiP mode,1: Enable XiP mode"
hexmask.long.byte 0x00 8.--15. 1. "XIPEXCODE,XiP mode exit code"
newline
hexmask.long.byte 0x00 0.--7. 1. "XIPENCODE,XiP mode enter code"
group.long 0x6C++0x03
line.long 0x00 "CSSCTL,xSPI CS Size Control Register"
bitfld.long 0x00 8.--13. "CS1SIZE,CS1 (slave1) size" "0: 0x00,1: 0x01,?,3: 0x03,?,?,?,7: 0x07,?,?,?,?,?,?,?,15: 16 MB,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: 32 MB,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,63: 64 MB"
bitfld.long 0x00 0.--5. "CS0SIZE,CS0 (slave0) size" "0: 0x00,1: 0x01,?,3: 0x03,?,?,?,7: 0x07,?,?,?,?,?,?,?,15: 16 MB,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: 32 MB,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,63: 64 MB"
group.long 0x70++0x03
line.long 0x00 "CDCTL0,xSPI Command Manual Control Register 0"
bitfld.long 0x00 24.--27. "PERREP,Periodic transaction repeat" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--20. "PERITV,Periodic transaction interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4.--5. "TRNUM,Transaction number" "0: Issue 1 command (using command buffer 0),1: Issue 2 commands (using command buffer 0-1),2: Issue 3 commands (using command buffer 0-2),3: Issue 4 commands (using command buffer 0-3)"
bitfld.long 0x00 3. "CSSEL,Chip select" "0: CS0,1: CS1"
newline
bitfld.long 0x00 1. "PERMD,Periodic mode" "0: Direct manual-command mode,1: Periodic manual-command mode"
bitfld.long 0x00 0. "TRREQ,Transaction request" "0: No transaction,1: Request transaction"
group.long 0x74++0x03
line.long 0x00 "CDCTL1,xSPI Command Manual Control Register 1"
hexmask.long 0x00 0.--31. 1. "PEREXP,Periodic transaction expected value"
group.long 0x78++0x03
line.long 0x00 "CDCTL2,xSPI Command Manual Control Register 2"
hexmask.long 0x00 0.--31. 1. "PERMSK,Periodic transaction masked value"
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x10 0x20 0x30 )
group.long ($2+0x80)++0x03
line.long 0x00 "CDTBUF$1,xSPI Command Manual Type Buf"
hexmask.long.word 0x00 16.--31. 1. "CMD,Command (1-2 bytes)"
bitfld.long 0x00 15. "TRTYPE,Transaction Type" "0: Read transaction (Readout data from slave..,1: Not read transaction"
newline
bitfld.long 0x00 9.--13. "LATE,Latency cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--8. "DATASIZE,Write/Read Data Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2.--4. "ADDSIZE,Address size" "0: 0 bytes (No address phase),1: 1 byte,2: 2 bytes,3: 3 bytes,4: 4 bytes,?..."
bitfld.long 0x00 0.--1. "CMDSIZE,Command Size" "0: 0 bytes (No command phase),1: 1 byte,2: 2 bytes,?..."
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x10 0x20 0x30 )
group.long ($2+0x84)++0x03
line.long 0x00 "CDABUF$1,xSPI Command Manual Address Buf"
hexmask.long 0x00 0.--31. 1. "ADD,Address"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x10 0x20 0x30 )
group.long ($2+0x88)++0x03
line.long 0x00 "CDD0BUF$1,xSPI Command Manual Data 0 Buf"
hexmask.long 0x00 0.--31. 1. "DATA,Write/Read Data"
repeat.end
repeat 4. (strings "0" "1" "2" "3" )(list 0x0 0x10 0x20 0x30 )
group.long ($2+0x8C)++0x03
line.long 0x00 "CDD1BUF$1,xSPI Command Manual Data 1 Buf"
hexmask.long 0x00 0.--31. 1. "DATA,Write/Read Data"
repeat.end
group.long 0x100++0x03
line.long 0x00 "LPCTL0,xSPI Link Pattern Control Register 0"
bitfld.long 0x00 31. "XD2VAL,XiP Disable pattern 2nd phase value" "0: Low drive,1: High drive"
bitfld.long 0x00 24.--28. "XD2LEN,XiP Disable pattern 2nd phase length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 23. "XD1VAL,XiP Disable pattern 1st phase value" "0: Low drive,1: High drive"
bitfld.long 0x00 16.--20. "XD1LEN,XiP Disable pattern 1st phase length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4.--5. "XDPIN,XiP Disable pattern pin" "0: 1 pin,1: 2 pins,2: 4 pins,3: 8 pins"
bitfld.long 0x00 3. "CSSEL,Chip select" "0: slave0 (CS0),1: slave1 (CS1)"
newline
bitfld.long 0x00 0. "PATREQ,Pattern request" "0: No request XiP Disable pattern,1: Request XiP Disable pattern"
group.long 0x104++0x03
line.long 0x00 "LPCTL1,xSPI Link Pattern Control Register 1"
bitfld.long 0x00 12.--14. "RSTSU,Reset pattern data output setup time" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "RSTWID,Reset pattern width" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--5. "RSTREP,Reset pattern repeat" "0: 4 times (Specified on Reset Signaling Protocol),1: 5 times,2: 6 times,3: 7 times"
bitfld.long 0x00 3. "CSSEL,Chip select" "0: slave0 (CS0),1: slave1 (CS1)"
newline
bitfld.long 0x00 0.--1. "PATREQ,Pattern request" "0: No request,1: Request Reset pattern,2: Request CS only pattern,3: Setting prohibited"
group.long 0x108++0x03
line.long 0x00 "LIOCTL,xSPI Link I/O Control Register"
bitfld.long 0x00 17. "RSTCS1,Reset drive for slave1" "0: Drive Low level,1: Drive High level"
bitfld.long 0x00 16. "RSTCS0,Reset drive for slave0" "0: Drive Low level,1: Drive High level"
newline
bitfld.long 0x00 1. "WPCS1,WP drive for slave1" "0: Drive Low level,1: Drive High level"
bitfld.long 0x00 0. "WPCS0,WP drive for slave0" "0: Drive Low level,1: Drive High level"
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x130)++0x03
line.long 0x00 "CCCTL0CS$1,xSPI Command Calibration Control Register 0 CSn"
bitfld.long 0x00 24.--28. "CASFTEND,Calibration DS shift end value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--20. "CASFTSTA,Calibration DS shift start value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 8.--12. "CAITV,Calibration interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1. "CANOWR,Calibration no write mode" "0: Calibration sequence with write command,1: Calibration sequence without write command"
newline
bitfld.long 0x00 0. "CAEN,Automatic Calibration Enable" "0: Disable automatic calibration,1: Enable automatic calibration"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x134)++0x03
line.long 0x00 "CCCTL1CS$1,xSPI Command Calibration Control Register 1 CSn"
bitfld.long 0x00 24.--28. "CARDLATE,Read Latency cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--20. "CAWRLATE,Write Latency cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--8. "CADATASIZE,Write/Read Data Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2.--4. "CAADDSIZE,Address size" "0: 0 bytes (No address phase),1: 1 byte,2: 2 bytes,3: 3 bytes,4: 4 bytes,?..."
newline
bitfld.long 0x00 0.--1. "CACMDSIZE,Command Size" "0: 0 bytes (No command phase),1: 1 byte,2: 2 bytes,3: Setting prohibited"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x138)++0x03
line.long 0x00 "CCCTL2CS$1,xSPI Command Calibration Control Register 2 CSn"
hexmask.long.word 0x00 16.--31. 1. "CARDCMD,Calibration pattern read command"
hexmask.long.word 0x00 0.--15. 1. "CAWRCMD,Calibration pattern write command"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x13C)++0x03
line.long 0x00 "CCCTL3CS$1,xSPI Command Calibration Control Register 3 CSn"
hexmask.long 0x00 0.--31. 1. "CAADD,Calibration pattern address"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x140)++0x03
line.long 0x00 "CCCTL4CS$1,xSPI Command Calibration Control Register 4 CSn"
hexmask.long 0x00 0.--31. 1. "CADATA,Calibration pattern data"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x144)++0x03
line.long 0x00 "CCCTL5CS$1,xSPI Command Calibration Control Register 5 CSn"
hexmask.long 0x00 0.--31. 1. "CADATA,Calibration pattern data"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x148)++0x03
line.long 0x00 "CCCTL6CS$1,xSPI Command Calibration Control Register 6 CSn"
hexmask.long 0x00 0.--31. 1. "CADATA,Calibration pattern data"
repeat.end
repeat 2. (strings "0" "1" )(list 0x00 0x20 )
group.long ($2+0x14C)++0x03
line.long 0x00 "CCCTL7CS$1,xSPI Command Calibration Control Register 7 CSn"
hexmask.long 0x00 0.--31. 1. "CADATA,Calibration pattern data"
repeat.end
rgroup.long 0x180++0x03
line.long 0x00 "VERSTT,xSPI Version Register"
hexmask.long 0x00 0.--31. 1. "VER,Version"
rgroup.long 0x184++0x03
line.long 0x00 "COMSTT,xSPI Common Status Register"
bitfld.long 0x00 22. "RSTOCS1,RSTO monitor for slave1" "0: Low level,1: High level"
bitfld.long 0x00 21. "INTCS1,INT monitor for slave1" "0: Low level,1: High level"
newline
bitfld.long 0x00 20. "ECSCS1,ECS monitor for slave1" "0: Low level,1: High level"
bitfld.long 0x00 18. "RSTOCS0,RSTO monitor for slave0" "0: Low level,1: High level"
newline
bitfld.long 0x00 17. "INTCS0,INT monitor for slave0" "0: Low level,1: High level"
bitfld.long 0x00 16. "ECSCS0,ECS monitor for slave0" "0: Low level,1: High level"
newline
bitfld.long 0x00 6. "WRBUFNE,Write Buffer Not Empty" "0: Empty,1: Not empty"
bitfld.long 0x00 4. "PBUFNE,Prefetch Buffer Not Empty" "0: Empty,1: Not empty"
newline
bitfld.long 0x00 0. "MEMACC,Memory access ongoing" "0: AHB channel is not accessing to memory,1: AHB channel is accessing to memory"
repeat 2. (strings "0" "1" )(list 0x00 0x04 )
rgroup.long ($2+0x188)++0x03
line.long 0x00 "CASTTCS$1,xSPI Calibration Status Register CSn"
hexmask.long 0x00 0.--31. 1. "CASUC,Calibration Success"
repeat.end
rgroup.long 0x190++0x03
line.long 0x00 "INTS,xSPI Interrupt Status Register"
bitfld.long 0x00 31. "CASUCCS1,Calibration success for slave1" "0: No detection,1: Detection"
bitfld.long 0x00 30. "CASUCCS0,Calibration success for slave0" "0: No detection,1: Detection"
newline
bitfld.long 0x00 29. "CAFAILCS1,Calibration failed for slave1" "0: No detection,1: Detection"
bitfld.long 0x00 28. "CAFAILCS0,Calibration failed for slave0" "0: No detection,1: Detection"
newline
bitfld.long 0x00 20. "BUSERR,AHB bus error" "0,1"
bitfld.long 0x00 18. "BRGUF,Bridge Buffer underflow" "0,1"
newline
bitfld.long 0x00 16. "BRGOF,Bridge Buffer overflow" "0,1"
bitfld.long 0x00 13. "INTCS1,Interrupt detection for slave1" "0: No detection,1: Detection"
newline
bitfld.long 0x00 12. "INTCS0,Interrupt detection for slave0" "0: No detection,1: Detection"
bitfld.long 0x00 9. "ECSCS1,ECC error detection for slave1" "0: No detection,1: Detection"
newline
bitfld.long 0x00 8. "ECSCS0,ECC error detection for slave0" "0: No detection,1: Detection"
bitfld.long 0x00 5. "DSTOCS1,DS timeout for slave1" "0: No detection,1: Detection"
newline
bitfld.long 0x00 4. "DSTOCS0,DS timeout for slave0" "0: No detection,1: Detection"
bitfld.long 0x00 3. "PERTO,Periodic transaction timeout" "0: No detection,1: Detection"
newline
bitfld.long 0x00 2. "INICMP,Initial Sequence Completed" "0: No detection,1: Detection"
bitfld.long 0x00 1. "PATCMP,Pattern Completed" "0: No detection,1: Detection"
newline
bitfld.long 0x00 0. "CMDCMP,Command Completed" "0: No detection,1: Detection"
wgroup.long 0x194++0x03
line.long 0x00 "INTC,xSPI Interrupt Clear Register"
bitfld.long 0x00 31. "CASUCCS1C,Calibration success for slave1 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 30. "CASUCCS0C,Calibration success for slave0 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 29. "CAFAILCS1C,Calibration failed for slave1 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 28. "CAFAILCS0C,Calibration failed for slave0 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 20. "BUSERRC,AHB bus error interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 18. "BRGUFC,Bridge Buffer underflow interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 16. "BRGOFC,Bridge Buffer overflow interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 13. "INTCS1C,Interrupt detection for slave1 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 12. "INTCS0C,Interrupt detection for slave0 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 9. "ECSCS1C,ECC error detection for slave1 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 8. "ECSCS0C,ECC error detection for slave0 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 5. "DSTOCS1C,DS timeout for slave1 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 4. "DSTOCS0C,DS timeout for slave0 interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 3. "PERTOC,Periodic transaction timeout interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 2. "INICMPC,Initial Sequence Completed interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
bitfld.long 0x00 1. "PATCMPC,Pattern Completed interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
newline
bitfld.long 0x00 0. "CMDCMPC,Command Completed interrupt clear" "0: No change interrupt status,1: Clear interrupt status"
group.long 0x198++0x03
line.long 0x00 "INTE,xSPI Interrupt Enable Register"
bitfld.long 0x00 31. "CASUCCS1E,Calibration success for slave1 interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 30. "CASUCCS0E,Calibration success for slave0 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 29. "CAFAILCS1E,Calibration failed for slave1 interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 28. "CAFAILCS0E,Calibration failed for slave0 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 20. "BUSERRE,AHB bus error interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 18. "BRGUFE,Bridge Buffer underflow interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 16. "BRGOFE,Bridge Buffer overflow interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 13. "INTCS1E,Interrupt detection for slave1 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 12. "INTCS0E,Interrupt detection for slave0 interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 9. "ECSCS1E,ECC error detection for slave1 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 8. "ECSCS0E,ECC error detection for slave0 interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 5. "DSTOCS1E,DS timeout for slave1 interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 4. "DSTOCS0E,DS timeout for slave0 interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 3. "PERTOE,Periodic transaction timeout interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 2. "INICMPE,Initial Sequence Completed interrupt enable" "0: Disabled,1: Enabled"
bitfld.long 0x00 1. "PATCMPE,Pattern Completed interrupt enable" "0: Disabled,1: Enabled"
newline
bitfld.long 0x00 0. "CMDCMPE,Command Completed interrupt enable" "0: Disabled,1: Enabled"
tree.end
repeat.end
tree.end
autoindent.off
newline