; -------------------------------------------------------------------------------- ; @Title: IMX8ULP On-Chip Peripherals ; @Props: Released ; @Author: KWI, KMB, JON ; @Changelog: 2020-07-30 KWI ; 2020-10-15 KWI ; 2021-04-07 KWI ; 2021-08-11 KMB ; 2022-01-25 JON ; @Manufacturer: NXP - NXP Semiconductors ; @Doc: SVD generated, based on: MIMX8UD7_ca35.svd, MIMX8UD7_cm33.svd, ; MIMX8UD3_cm33.svd, MIMX8UD3_ca35.svd, MIMX8UD5_ca35.svd, ; MIMX8UD5_cm33.svd, MIMX8US3_ca35.svd, MIMX8US3_cm33.svd, ; MIMX8US5_ca35.svd, MIMX8US5_cm33.svd ; @Core: Cortex-A35, Cortex-M33F ; @Chip: IMX8UD3, IMX8UD3-CM33, IMX8UD5, IMX8UD5-CM33, ; IMX8UD7, IMX8UD7-CM33, IMX8US3, IMX8US3-CM33, ; IMX8US5, IMX8US5-CM33 ; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: perimx8ulp.per 17736 2024-04-08 09:26:07Z kwisniewski $ sif (CORENAME()=="CORTEXA35") tree "Core Registers (Cortex-A35)" AUTOINDENT.ON center tree tree.open "AArch64" tree "ID Registers" rgroup.quad spr:0x30000++0x0 line.quad 0x00 "MIDR_EL1,Main ID Register" hexmask.quad.byte 0x00 24.--31. 0x01 "IMPLEMENTER,Implementer code" bitfld.quad 0x00 20.--23. "VARIANT,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "ARCHITECTURE,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CPUID scheme" newline hexmask.quad.word 0x00 4.--15. 0x10 "PARTNUM,Primary Part Number" bitfld.quad 0x00 0.--3. "REVISION,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.quad spr:0x30040++0x00 line.quad 0x00 "ID_AA64PFR0_EL1,AArch64 Processor Feature Register 0" bitfld.quad 0x00 24.--27. "GIC,GIC CPU interface" "Disabled,Enabled,?..." bitfld.quad 0x00 20.--23. "ADVSIMD,Advanced SIMD" "Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented" bitfld.quad 0x00 16.--19. "FP,Floating-point" "Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented" newline bitfld.quad 0x00 12.--15. "EL3H,EL3 exception handling" "Reserved,Reserved,AArch32/AArch64,?..." bitfld.quad 0x00 8.--11. "EL2H,EL2 exception handling" "Reserved,Reserved,AArch32/AArch64,?..." bitfld.quad 0x00 4.--7. "EL1H,EL1 exception handling" "Reserved,Reserved,AArch32/AArch64,?..." newline bitfld.quad 0x00 0.--3. "EL0H,EL0 exception handling" "Reserved,Reserved,AArch32/AArch64,?..." rgroup.quad spr:0x30050++0x00 line.quad 0x00 "ID_AA64DFR0_EL1,AArch64 Debug Feature Register 0" bitfld.quad 0x00 28.--31. "CTX_CMPS,Number of breakpoints that are context-aware minus 1" "Reserved,1,?..." bitfld.quad 0x00 20.--23. "WRPS,The number of watchpoints minus 1" "Reserved,Reserved,Reserved,3,?..." bitfld.quad 0x00 12.--15. "BRPS,The number of breakpoints minus 1" "Reserved,Reserved,Reserved,Reserved,Reserved,5,?..." newline bitfld.quad 0x00 8.--11. "PMUVER,Performance Monitors extension version" "Reserved,Implemented,?..." bitfld.quad 0x00 4.--7. "TRACEVER,Trace extension" "Not implemented,?..." bitfld.quad 0x00 0.--3. "DEBUGGER,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implemented,?..." rgroup.quad spr:0x30060++0x00 line.quad 0x00 "ID_AA64ISAR0_EL1,AArch64 Instruction Set Attribute Register 0" bitfld.quad 0x00 16.--19. "CRC32,CRC32" "Reserved,Implemented,?..." bitfld.quad 0x00 12.--15. "SHA2,SHA2 instructions are implemented" "Not implemented,Implemented,?..." bitfld.quad 0x00 8.--11. "SHA1,SHA1 instructions are implemented" "Not implemented,Implemented,?..." newline bitfld.quad 0x00 4.--7. "AES,AES instructions are implemented" "Not implemented,Reserved,Implemented,?..." rgroup.quad spr:0x30070++0x00 line.quad 0x00 "ID_AA64MMFR0_EL1,AArch64 Memory Model Feature Register 0" bitfld.quad 0x00 28.--31. "4KB,4KB granule supported" "Supported,?..." bitfld.quad 0x00 24.--27. "64KB,64KB granule supported" "Supported,?..." bitfld.quad 0x00 20.--23. "16KB,16KB granule supported" "Reserved,Supported,?..." newline bitfld.quad 0x00 12.--15. "SNSMEM,Secure versus Non-secure Memory distinction" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "BIGEND,Mixed-endian configuration support" "Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "ASIDBITS,Number of ASID bits" "Reserved,Reserved,16 bits,?..." newline bitfld.quad 0x00 0.--3. "PARANGE,Physical address range supported" "Reserved,Reserved,40 bits/1 TB,?..." rgroup.quad spr:0x30054++0x00 line.quad 0x00 "ID_AA64AFR0_EL1,AArch64 Auxiliary Feature Register 0" rgroup.quad spr:0x30055++0x00 line.quad 0x00 "ID_AA64AFR1_EL1,AArch64 Auxiliary Feature Register 1" rgroup.quad spr:0x30041++0x00 line.quad 0x00 "ID_AA64PFR1_EL1,AArch64 Processor Feature Register 1" rgroup.quad spr:0x30051++0x00 line.quad 0x00 "ID_AA64DFR1_EL1,AArch64 Debug Feature Register 1" rgroup.quad spr:0x30061++0x00 line.quad 0x00 "ID_AA64ISAR1_EL1,AArch64 Instruction Set Attribute Register 1" rgroup.quad spr:0x30071++0x00 line.quad 0x00 "ID_AA64MMFR1_EL1,AArch64 Memory Model Feature Register 1" rgroup.quad spr:0x30010++0x00 line.quad 0x00 "ID_PFR0_EL1,AArch32 Processor Feature Register 0" bitfld.quad 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..." bitfld.quad 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..." newline bitfld.quad 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..." rgroup.quad spr:0x30011++0x00 line.quad 0x00 "ID_PFR1_EL1,AArch32 Processor Feature Register 1" bitfld.quad 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..." newline bitfld.quad 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." rgroup.quad spr:0x30012++0x00 line.quad 0x00 "ID_DFR0_EL1,AArch32 Debug Feature Register 0" bitfld.quad 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..." bitfld.quad 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Not supported,Supported,?..." newline bitfld.quad 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..." bitfld.quad 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..." rgroup.quad spr:0x30013++0x00 line.quad 0x00 "ID_AFR0_EL1,AArch32 Auxiliary Feature Register 0 EL1" rgroup.quad spr:0x30014++0x00 line.quad 0x00 "ID_MMFR0_EL1,AArch32 Memory Model Feature Register 0" bitfld.quad 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,Implemented,?..." bitfld.quad 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..." bitfld.quad 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..." bitfld.quad 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..." bitfld.quad 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,Implemented,?..." newline bitfld.quad 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..." bitfld.quad 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,VMSAv7,?..." rgroup.quad spr:0x30015++0x00 line.quad 0x00 "ID_MMFR1_EL1,AArch32 Memory Model Feature Register 1" bitfld.quad 0x00 28.--31. "BTB,Indicates branch predictor management requirements" "Reserved,Reserved,Reserved,Reserved,Not required,?..." bitfld.quad 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." bitfld.quad 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." newline bitfld.quad 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.quad 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.quad 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.quad 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup.quad spr:0x30016++0x00 line.quad 0x00 "ID_MMFR2_EL1,AArch32 Memory Model Feature Register 2" bitfld.quad 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..." bitfld.quad 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.quad 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." bitfld.quad 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." rgroup.quad spr:0x30017++0x00 line.quad 0x00 "ID_MMFR3_EL1,AArch32 Memory Model Feature Register 3" bitfld.quad 0x00 28.--31. "SS,Supersection support" "Supported,?..." bitfld.quad 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..." bitfld.quad 0x00 20.--23. "CW,Coherent walk" "Reserved,Supported,?..." newline bitfld.quad 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "HCMOSW,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 0.--3. "HCMOMVA,Invalidate Cache MVA Support" "Reserved,Supported,?..." rgroup.quad spr:0x30020++0x00 line.quad 0x00 "ID_ISAR0_EL1,AArch32 Instruction Set Attribute Register 0" bitfld.quad 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..." newline bitfld.quad 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..." rgroup.quad spr:0x30021++0x00 line.quad 0x00 "ID_ISAR1_EL1,AArch32 Instruction Set Attribute Register 1" bitfld.quad 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..." rgroup.quad spr:0x30022++0x00 line.quad 0x00 "ID_ISAR2_EL1,AArch32 Instruction Set Attribute Register 2" bitfld.quad 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 24.--27. "PSRI,PSR Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..." newline bitfld.quad 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.quad spr:0x30023++0x00 line.quad 0x00 "ID_ISAR3_EL1,AArch32 Instruction Set Attribute Register 3" bitfld.quad 0x00 28.--31. "TEEEI,Thumb-EE Extensions Support" "Not supported,?..." bitfld.quad 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..." rgroup.quad spr:0x30024++0x00 line.quad 0x00 "ID_ISAR4_EL1,AArch32 Instruction Set Attribute Register 4" bitfld.quad 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..." bitfld.quad 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..." bitfld.quad 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..." newline bitfld.quad 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..." newline bitfld.quad 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.quad spr:0x30025++0x00 line.quad 0x00 "ID_ISAR5_EL1,AArch32 Instruction Set Attribute Register 5" bitfld.quad 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..." bitfld.quad 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..." bitfld.quad 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..." newline bitfld.quad 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..." bitfld.quad 0x00 0.--3. "SEVL,SEVL Instructions Support" "Reserved,Supported,?..." rgroup.quad spr:0x33001++0x0 line.quad 0x00 "CTR_EL0,Cache Type Register" bitfld.quad 0x00 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.quad 0x00 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.quad 0x00 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.quad 0x00 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..." bitfld.quad 0x00 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." rgroup.quad spr:0x30005++0x00 line.quad 0x00 "MPIDR_EL1,Multiprocessor Affinity Register" hexmask.quad.byte 0x00 32.--39. 1. "AFF3,Highest level affinity field" bitfld.quad 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" bitfld.quad 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..." newline hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field" hexmask.quad.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field" hexmask.quad.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Lowest level affinity field" rgroup.quad spr:0x30006++0x0 line.quad 0x00 "REVIDR_EL1,Revision ID Register" rgroup.quad spr:0x33007++0x00 line.quad 0x00 "DCZID_EL0,Data Cache Zero ID Register" bitfld.quad 0x00 4. "DZP,Prohibit the DC ZVA instruction" "Not prohibited,Prohibited" bitfld.quad 0x00 0.--3. "BS,Block Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." rgroup.quad spr:0x31007++0x00 line.quad 0x00 "AIDR_EL1,Auxiliary ID Register" group.quad spr:0x34000++0x0 line.quad 0x00 "VPIDR_EL2,Virtualization Processor ID Register" hexmask.quad.byte 0x00 24.--31. 0x01 "IMPLEMENTER,Implementer code" bitfld.quad 0x00 20.--23. "VARIANT,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 16.--19. "ARCHITECTURE,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CPUID scheme" newline hexmask.quad.word 0x00 4.--15. 0x10 "PARTNUM,Primary Part Number" bitfld.quad 0x00 0.--3. "REVISION,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.quad spr:0x34005++0x00 line.quad 0x00 "VMPIDR_EL2,Virtualization Multiprocessor ID Register" hexmask.quad.byte 0x00 32.--39. 1. "AFF3,Highest level affinity field" bitfld.quad 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" bitfld.quad 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..." newline hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field" hexmask.quad.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field" hexmask.quad.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Lowest level affinity field" tree.end tree "System Control and Configuration" group.quad spr:0x36111++0x00 line.quad 0x00 "SDER32_EL3,Secure Debug Enable Register" bitfld.quad 0x00 1. "SUNIDEN,Enable non-invasive debug features in Secure User mode" "Disabled,Enabled" bitfld.quad 0x00 0. "SUIDEN,Enable debug exceptions in Secure User mode" "Disabled,Enabled" group.quad spr:0x30100++0x0 line.quad 0x00 "SCTLR_EL1,System Control Register (EL1)" bitfld.quad 0x00 26. "UCI,EL0 access enable (DC CVAU|DC CIVAC|DC CVAC|IC IVAU)" "Disabled,Enabled" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.quad 0x00 24. "E0E,Endianness of explicit data access at EL0" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.quad 0x00 18. "NTWE,Not trap WFE" "No,Yes" bitfld.quad 0x00 16. "NTWI,Not trap WFI" "No,Yes" newline bitfld.quad 0x00 15. "UCT,EL0 access enable (CTR_EL0)" "Disabled,Enabled" bitfld.quad 0x00 14. "DZE,EL0 access enable (DC ZVA)" "Disabled,Enabled" newline bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.quad 0x00 9. "UMA,User Mask Access" "Disabled,Enabled" newline bitfld.quad 0x00 8. "SED,SETEND Disable" "No,Yes" bitfld.quad 0x00 7. "ITD,IT instruction disable" "No,Yes" newline bitfld.quad 0x00 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled" bitfld.quad 0x00 4. "SA0,EL0 stack alignment check enable" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x34100++0x0 line.quad 0x00 "SCTLR_EL2,System Control Register (EL2)" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" newline bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x36100++0x0 line.quad 0x00 "SCTLR_EL3,System Control Register (EL3)" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" newline bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x31F20++0x00 line.quad 0x00 "CPUACTLR_EL1,CPU Auxiliary Control Register" bitfld.quad 0x00 44. "ENDCCASCI,Enable Data Cache Clean As data cache Clean/Invalidate" "Disabled,Enabled" bitfld.quad 0x00 30. "CDIDIS,Disable Cryptographic Dual Issue" "No,Yes" newline bitfld.quad 0x00 29. "DIDIS,Disable Dual Issue" "No,Yes" bitfld.quad 0x00 27.--28. "RADIS,Write streaming no-allocate threshold" "16th,128th,512th,Disabled" newline bitfld.quad 0x00 25.--26. "L1RADIS,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled" bitfld.quad 0x00 24. "DTAH,Disable Transient allocation hint" "No,Yes" newline bitfld.quad 0x00 23. "STBPFRS,Disable ReadUnique request for prefetch streams initiated by STB accesses" "No,Yes" bitfld.quad 0x00 22. "STBPFDIS,Disable prefetch streams initiated from STB accesses" "No,Yes" newline bitfld.quad 0x00 19.--20. "NPFSTRM,Number of independent data prefetch streams" "1 stream,2 streams,3 streams,4 streams" bitfld.quad 0x00 18. "DSTDIS,Enable device split throttle" "Disabled,Enabled" newline bitfld.quad 0x00 17. "STRIDE,Configure the sequence length that triggers data prefetch streams" "2 linefills,3 linefills" bitfld.quad 0x00 13.--15. "L1PCTL,L1 Data prefetch control" "Disabled,1,2,3,4,5,6,8" newline bitfld.quad 0x00 10. "DODMBS,Disable optimized Data Memory Barrier behavior" "No,Yes" bitfld.quad 0x00 6. "L1DEIEN,L1 D-cache Data RAM Error Injection Enable" "Disabled,Enabled" group.quad spr:0x31F21++0x00 line.quad 0x00 "CPUECTLR_EL1,CPU Extended Control Register" bitfld.quad 0x00 6. "SMPEN,Enable hardware management ofdata coherency with other processors in the multiprocessor" "Disabled,Enabled" bitfld.quad 0x00 3.--5. "FPRETCTL,Advanced SIMD and Floating-point retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks" newline bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks" group.quad spr:0x30101++0x0 line.quad 0x00 "ACTLR_EL1,Auxiliary Control Register (EL1)" group.quad spr:0x34101++0x0 line.quad 0x00 "ACTLR_EL2,Auxiliary Control Register (EL2)" bitfld.quad 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled" bitfld.quad 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled" newline bitfld.quad 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled" bitfld.quad 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled" newline bitfld.quad 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled" group.quad spr:0x36101++0x0 line.quad 0x00 "ACTLR_EL3,Auxiliary Control Register (EL3)" bitfld.quad 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled" bitfld.quad 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled" newline bitfld.quad 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled" bitfld.quad 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled" newline bitfld.quad 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled" group.quad spr:0x30102++0x00 line.quad 0x00 "CPACR_EL1,Architectural Feature Access Control Register" bitfld.quad 0x00 20.--21. "FPEN,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution to trap to EL1 when executed from EL0 or EL1" "EL0/EL1,EL0,EL0/EL1,Not trapped" group.quad spr:0x36110++0x0 line.quad 0x00 "SCR_EL3,Secure Configuration Register" bitfld.quad 0x00 13. "TWE,Trap WFE Instructions" "Not trapped,Trapped" bitfld.quad 0x00 12. "TWI,Trap WFI Instructions" "Not trapped,Trapped" newline bitfld.quad 0x00 11. "ST,Enable secure EL1 access" "Disabled,Enabled" bitfld.quad 0x00 10. "RW,Register width control for lower exception levels" "AArch32,AArch64" newline bitfld.quad 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted" bitfld.quad 0x00 8. "HCE,Hypervisor Call enable" "No,Yes" newline bitfld.quad 0x00 7. "SMD,Secure Monitor Call disable" "No,Yes" bitfld.quad 0x00 3. "EA,External Abort exceptions handled in Abort mode or Monitor mode" "Abort,Monitor" newline bitfld.quad 0x00 2. "FIQ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor" bitfld.quad 0x00 1. "IRQ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor" newline bitfld.quad 0x00 0. "NS,Secure mode " "Secure,Non-secure" group.quad spr:0x34110++0x00 line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register" bitfld.quad 0x00 33. "ID,Stage 2 Instruction cache disable" "No,Yes" bitfld.quad 0x00 32. "CD,Stage 2 Data cache disable" "No,Yes" newline bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,EL1 is 64-bit" bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled" newline bitfld.quad 0x00 28. "TDZ,Trap DC ZVA instruction" "Disabled,Enabled" bitfld.quad 0x00 27. "TGE,Trap General Exceptions has an enhanced role when EL2 is using AArch64" "Disabled,Enabled" newline bitfld.quad 0x00 26. "TVM,Trap Virtual Memory controls to EL2" "Disabled,Enabled" bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions to EL2" "Disabled,Enabled" newline bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unificiation to EL2" "Disabled,Enabled" bitfld.quad 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency tp EL2" "Disabled,Enabled" newline bitfld.quad 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way to EL2" "Disabled,Enabled" bitfld.quad 0x00 21. "TACR,Trap Auxiliary Control Register" "Disabled,Enabled" newline bitfld.quad 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "Disabled,Enabled" bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled" newline bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled" bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled" newline bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled" bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled" newline bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled" bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled" newline bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled" bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability upgrade. determines the minimum shareability domain that is applied to any barrier executed from EL1 or EL0" "No effect,Inner Shareable,Outer Shareable,Full System" newline bitfld.quad 0x00 9. "FB,Force broadcast" "Not forced,Forced" bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort" "Not pending,Pending" newline bitfld.quad 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending" bitfld.quad 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending" newline bitfld.quad 0x00 5. "AMO,Asynchronous abort and error interrupt routing" "Disabled,Enabled" bitfld.quad 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled" newline bitfld.quad 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled" bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled" newline bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "Disabled,Enabled" bitfld.quad 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled" group.quad spr:0x30510++0x00 line.quad 0x00 "AFSR0_EL1,Auxiliary Fault Status Registers 0 (EL1)" group.quad spr:0x30511++0x00 line.quad 0x00 "AFSR1_EL1,Auxiliary Fault Status Registers 1 (EL1)" group.quad spr:0x34510++0x00 line.quad 0x00 "AFSR0_EL2,Auxiliary Fault Status Registers 0 (EL2)" group.quad spr:0x34511++0x00 line.quad 0x00 "AFSR1_EL2,Auxiliary Fault Status Registers 1 (EL2)" group.quad spr:0x36510++0x00 line.quad 0x00 "AFSR0_EL3,Auxiliary Fault Status Registers 0 (EL3)" group.quad spr:0x36511++0x00 line.quad 0x00 "AFSR1_EL3,Auxiliary Fault Status Registers 1 (EL3)" tree.open "Exception Syndrome Registers" if (((per.q(spr:0x30520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x30520))&0xFC000000)==0x04000000) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x30520))&0xFC000000)==(0x0C000000||0x14000000)) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x30520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x30520))&0xFC000000)==0x18000000) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) if (((per.q(spr:0x30520))&0x08)==0x08) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif else if (((per.q(spr:0x30520))&0x08)==0x08) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "Rn,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif endif elif (((per.q(spr:0x30520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x30520))&0x1000000)==0x1000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x30520))&0xFC000000)==(0x44000000||0x54000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x30520))&0xFC000000)==0x60000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x30520))&0xFC000000)==(0x80000000||0x84000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." elif (((per.q(spr:0x30520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x30520))&0x3F)==0x10) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." endif elif (((per.q(spr:0x30520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x30520))&0x3F)==0x10) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." endif elif (((per.q(spr:0x30520))&0xFC800000)==(0xA0800000||0xB0800000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x30520))&0xFC800000)==(0xA0000000||0xB0000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x30520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x30520))&0x3F)==0x11) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" newline newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x30520))&0xFD000000)==0xBC000000) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" elif (((per.q(spr:0x30520))&0xFC000000)==(0xC0000000||0xC4000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x30520))&0xFC000000)==(0xC8000000||0xCC000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid" bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x30520))&0xFC000000)==(0xD0000000||0xD4000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x30520))&0xFC000000)==(0xE0000000||0xF0000000)) group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x30520++0x00 line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." endif if (((per.q(spr:0x34520))&0xFC000000)==(0x00000000||0x24000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x34520))&0xFC000000)==0x04000000) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x0C000000||0x14000000||0x20000000)) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x34520))&0xFC000000)==0x18000000) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) if (((per.q(spr:0x34520))&0x08)==0x08) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif else if (((per.q(spr:0x34520))&0x08)==0x08) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif endif elif (((per.q(spr:0x34520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x34520))&0x1000000)==0x1000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x44000000||0x48000000||0x54000000||0x58000000||0x5C000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x34520))&0xFC000000)==0x4C000000) if ((((per.q(spr:0x34520))&0x1000000)==0x1000000)&&(((per.q(spr:0x34520))&0xF0000)==0x80000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" elif (((per.q(spr:0x34520))&0xF0000)==0x80000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" endif elif (((per.q(spr:0x34520))&0xFC000000)==0x60000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x34520))&0xFC000000)==0x68000000) if (((per.q(spr:0x34520))&0x02)==0x02) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 1. "ERET,Indicates whether an ERET or ERETA* instruction was trapped to EL2" "ERET,ERETA*" bitfld.quad 0x00 0. "ERETA,Indicates whether an ERETAA or ERETAB instruction was trapped to EL2" "ERETAA,ERETAB" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 1. "ERET,Indicates whether an ERET or ERETA* instruction was trapped to EL2" "ERET,ERETA*" endif elif (((per.q(spr:0x34520))&0xFC000000)==(0x80000000||0x84000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." elif (((per.q(spr:0x34520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x34520))&0x3F)==0x10) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." endif elif (((per.q(spr:0x34520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x34520))&0x3F)==0x10) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." endif elif (((per.q(spr:0x34520))&0xFC800000)==(0xA0800000||0xB0800000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x34520))&0xFC800000)==(0xA0000000||0xB0000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x34520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x34520))&0x3F)==0x11) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x34520))&0xFD000000)==0xBC000000) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" elif (((per.q(spr:0x34520))&0xFC000000)==(0xC0000000||0xC4000000||0xE8000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x34520))&0xFC000000)==(0xC8000000||0xCC000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid" bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes" newline bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x34520))&0xFC000000)==(0xD0000000||0xD4000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" newline bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" elif (((per.q(spr:0x34520))&0xFC000000)==(0xE0000000||0xF0000000)) group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x34520++0x00 line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,ERET/ERETAA/ERETAB,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,?..." endif if (((per.q(spr:0x36520))&0xFC000000)==(0x00000000||0x24000000||0x38000000||0x88000000||0x98000000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" elif (((per.q(spr:0x36520))&0xFC000000)==0x04000000) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.q(spr:0x36520))&0xFC000000)==(0x0C000000||0x14000000)) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x36520))&0xFC000000)==(0x10000000||0x30000000)) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif elif (((per.q(spr:0x36520))&0xFC000000)==0x18000000) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) if (((per.q(spr:0x36520))&0x08)==0x08) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif else if (((per.q(spr:0x36520))&0x08)==0x08) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,?..." newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" endif endif elif (((per.q(spr:0x36520))&0xFC000000)==0x1C000000) if (((per.q(spr:0x36520))&0x1000000)==0x1000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" endif elif (((per.q(spr:0x36520))&0xFC000000)==0x4C000000) if ((((per.q(spr:0x36520))&0x1000000)==0x1000000)&&(((per.q(spr:0x36520))&0xF0000)==0x80000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" elif (((per.q(spr:0x36520))&0xF0000)==0x80000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid" newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL2)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline newline bitfld.quad 0x00 19. "CCKNOWNPASS,Indicates whether the instruction might have failed its condition code check" "Unconditional,Conditional" endif elif (((per.q(spr:0x36520))&0xFC000000)==(0x54000000||0x58000000||0x5C000000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif (((per.q(spr:0x36520))&0xFC000000)==0x60000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3" bitfld.quad 0x00 17.--19. "OP2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 14.--16. "OP1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read" elif (((per.q(spr:0x36520))&0xFC000000)==0x7C000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.long 0x00 0.--24. 1. "IMPL_DEF,Implementation defined" elif (((per.q(spr:0x36520))&0xFC000000)==(0x80000000||0x84000000)) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 11.--12. "SET,Synchronous Error Type" "UER,UEO,UC,CE" newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/L0/base register,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." elif (((per.q(spr:0x36520))&0xFD000000)==(0x91000000||0x95000000)) if (((per.q(spr:0x36520))&0x3F)==0x10) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit" bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes" newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." endif elif (((per.q(spr:0x36520))&0xFD000000)==(0x90000000||0x94000000)) if (((per.q(spr:0x36520))&0x3F)==0x10) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes" bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline newline newline bitfld.quad 0x00 9. "EA,External abort type" "Not external,External" newline bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes" bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2" newline bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/L0,Sync. parity/ECC/L1,Sync. parity/ECC/L2,Sync. parity/ECC/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,?..." endif elif (((per.q(spr:0x36520))&0xFC800000)==0xB0800000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" newline bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred" newline bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred" bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred" elif (((per.q(spr:0x36520))&0xFC800000)==0xB0000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid" bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7" elif (((per.q(spr:0x36520))&0xFD000000)==0xBD000000) if (((per.q(spr:0x36520))&0x3F)==0x11) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" bitfld.quad 0x00 13. "IESB,Implicit Error Synchronization Barrier" "Not synchronized,Synchronized" newline bitfld.quad 0x00 10.--12. "AET,Asynchronous Error Type" "UC,UEU,UEO,UER,CE,?..." newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" newline newline bitfld.quad 0x00 9. "EA,External abort type" "No,Yes" bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Uncategorized,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous,?..." endif elif (((per.q(spr:0x36520))&0xFD000000)==0xBC000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid" elif (((per.q(spr:0x36520))&0xFC000000)==0xF0000000) group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit" newline hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value" else group.quad spr:0x36520++0x00 line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)" bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Pointer Authentication,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Implementation defined,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,?..." endif tree.end newline if (((per.q(spr:0x34501))&0x200)==0x200) group.quad spr:0x34501++0x00 line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register" bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR" bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long" newline bitfld.quad 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Reserved,Reserved,Reserved,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/L1,Sync. parity/on memory access/on TTW/L2,Sync. parity/on memory access/on TTW/L3,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." else group.quad spr:0x34501++0x00 line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register" bitfld.quad 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR" bitfld.quad 0x00 9. "LPAE,Translation table formats on taking a Data Abort exception" "Short,Long" newline bitfld.quad 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/L1,Permission/section,Sync. external/on TTW/L2,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/L1,Reserved,Sync. parity/on TTW/L2,?..." endif group.quad spr:0x30600++0x00 line.quad 0x00 "FAR_EL1,Fault Address Register (EL1)" group.quad spr:0x34600++0x00 line.quad 0x00 "FAR_EL2,Fault Address Register (EL2)" group.quad spr:0x36600++0x00 line.quad 0x00 "FAR_EL3,Fault Address Register (EL3)" group.quad spr:0x34604++0x00 line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register" hexmask.quad 0x00 4.--39. 0x10 "FIPA[47:12],Bits [47:12] of the faulting intermediate physical address" group.quad spr:0x30C00++0x00 line.quad 0x00 "VBAR_EL1,Vector Base Address Register (EL1)" hexmask.quad 0x00 11.--63. 0x8 "VBA,Base address of the exception vectors for exceptions taken in this exception level" group.quad spr:0x34C00++0x00 line.quad 0x00 "VBAR_EL2,Vector Base Address Register (EL2)" hexmask.quad 0x00 11.--63. 0x8 "VBA,Base address of the exception vectors for exceptions taken in this exception level" group.quad spr:0x36C00++0x00 line.quad 0x00 "VBAR_EL3,Vector Base Address Register (EL3)" hexmask.quad 0x00 11.--63. 0x8 "VBA,Base address of the exception vectors for exceptions taken in this exception level" rgroup.quad spr:0x36C01++0x00 line.quad 0x00 "RVBAR_EL3,Reset Vector Base Address Register" group.quad spr:0x36C02++0x00 line.quad 0x00 "RMR_EL3,Reset Management Register" bitfld.quad 0x00 1. "RR,Reset Request" "Not requested,Requested" bitfld.quad 0x00 0. "AA64,Determines which execution state the processor boots into after a warmreset" "AArch32,AArch64" rgroup.quad spr:0x30C10++0x00 line.quad 0x00 "ISR_EL1,Interrupt Status Register" bitfld.quad 0x00 8. "A,External abort pending flag" "Not pending,Pending" bitfld.quad 0x00 7. "I,Interrupt pending flag" "Not pending,Pending" bitfld.quad 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending" rgroup.quad spr:0x31F30++0x00 line.quad 0x00 "CBAR_EL1,Configuration Base Address Register" hexmask.quad.tbyte 0x00 18.--39. 0x4 "PERIPHBASE[39:18],Holds the physical base address of the memory-mapped GIC CPU interface registers" group.quad spr:0x30D01++0x00 line.quad 0x00 "CONTEXTIDR_EL1,Context ID Register" group.quad spr:0x33D02++0x00 line.quad 0x00 "TPIDR_EL0,Software Thread ID Register (EL0)" group.quad spr:0x33D03++0x00 line.quad 0x00 "TPIDRRO_EL0,Read-Only Software Thread ID Register (EL0)" group.quad spr:0x30D04++0x00 line.quad 0x00 "TPIDR_EL1,Software Thread ID Register (EL1)" group.quad spr:0x34D02++0x00 line.quad 0x00 "TPIDR_EL2,Software Thread ID Register (EL2)" group.quad spr:0x36D02++0x00 line.quad 0x00 "TPIDR_EL3,Software Thread ID Register (EL3)" tree.end tree "System Instructions" wgroup.quad spr:0x10710++0x00 line.quad 0x00 "IC_IALLUIS,IC_IALLUIS" wgroup.quad spr:0x10750++0x00 line.quad 0x00 "IC_IALLU,IC_IALLU" wgroup.quad spr:0x13751++0x00 line.quad 0x00 "IC_IVAU,IC_IVAU" wgroup.quad spr:0x13741++0x00 line.quad 0x00 "DC_ZVA,DC_ZVA" wgroup.quad spr:0x10761++0x00 line.quad 0x00 "DC_IVAC,DC_IVAC" wgroup.quad spr:0x10762++0x00 line.quad 0x00 "DC_ISW,DC_ISW" wgroup.quad spr:0x137A1++0x00 line.quad 0x00 "DC_CVAC,DC_CVAC" wgroup.quad spr:0x107A2++0x00 line.quad 0x00 "DC_CSW,DC_CSW" wgroup.quad spr:0x137B1++0x00 line.quad 0x00 "DC_CVAU,DC_CVAU" wgroup.quad spr:0x137E1++0x00 line.quad 0x00 "DC_CIVAC,DC_CIVAC" wgroup.quad spr:0x107E2++0x00 line.quad 0x00 "DC_CISW,DC_CISW" wgroup.quad spr:0x10780++0x00 line.quad 0x00 "AT_S1E1R,AT_S1E1R" wgroup.quad spr:0x10781++0x00 line.quad 0x00 "AT_S1E1W,AT_S1E1W" wgroup.quad spr:0x10782++0x00 line.quad 0x00 "AT_S1E0R,AT_S1E0R" wgroup.quad spr:0x10783++0x00 line.quad 0x00 "AT_S1E0W,AT_S1E0W" wgroup.quad spr:0x14784++0x00 line.quad 0x00 "AT_S12E1R,AT_S12E1R" wgroup.quad spr:0x14785++0x00 line.quad 0x00 "AT_S12E1W,AT_S12E1W" wgroup.quad spr:0x14786++0x00 line.quad 0x00 "AT_S12E0R,AT_S12E0R" wgroup.quad spr:0x14787++0x00 line.quad 0x00 "AT_S12E0W,AT_S12E0W" wgroup.quad spr:0x14780++0x00 line.quad 0x00 "AT_S1E2R,AT_S1E2R" wgroup.quad spr:0x14781++0x00 line.quad 0x00 "AT_S1E2W,AT_S1E2W" wgroup.quad spr:0x16780++0x00 line.quad 0x00 "AT_S1E3R,AT_S1E3R" wgroup.quad spr:0x16781++0x00 line.quad 0x00 "AT_S1E3W,AT_S1E3W" wgroup.quad spr:0x10870++0x00 line.quad 0x00 "TLBI_VMALLE1,TLBI_VMALLE1" wgroup.quad spr:0x10871++0x00 line.quad 0x00 "TLBI_VAE1,TLBI_VAE1" wgroup.quad spr:0x10872++0x00 line.quad 0x00 "TLBI_ASIDE1,TLBI_ASIDE1" wgroup.quad spr:0x10873++0x00 line.quad 0x00 "TLBI_VAAE1,TLBI_VAAE1" wgroup.quad spr:0x10875++0x00 line.quad 0x00 "TLBI_VALE1,TLBI_VALE1" wgroup.quad spr:0x10877++0x00 line.quad 0x00 "TLBI_VAALE1,TLBI_VAALE1" wgroup.quad spr:0x10830++0x00 line.quad 0x00 "TLBI_VMALLE1IS,TLBI_VMALLE1IS" wgroup.quad spr:0x10831++0x00 line.quad 0x00 "TLBI_VAE1IS,TLBI_VAE1IS" wgroup.quad spr:0x10832++0x00 line.quad 0x00 "TLBI_ASIDE1IS,TLBI_ASIDE1IS" wgroup.quad spr:0x10833++0x00 line.quad 0x00 "TLBI_VAAE1IS,TLBI_VAAE1IS" wgroup.quad spr:0x10835++0x00 line.quad 0x00 "TLBI_VALE1IS,TLBI_VALE1IS" wgroup.quad spr:0x10837++0x00 line.quad 0x00 "TLBI_VAALE1IS,TLBI_VAALE1IS" wgroup.quad spr:0x14801++0x00 line.quad 0x00 "TLBI_IPAS2E1IS,TLBI_IPAS2E1IS" wgroup.quad spr:0x14805++0x00 line.quad 0x00 "TLBI_IPAS2LE1IS,TLBI_IPAS2LE1IS" wgroup.quad spr:0x14841++0x00 line.quad 0x00 "TLBI_IPAS2E1,TLBI_IPAS2E1" wgroup.quad spr:0x14845++0x00 line.quad 0x00 "TLBI_IPAS2LE1,TLBI_IPAS2LE1" wgroup.quad spr:0x14871++0x00 line.quad 0x00 "TLBI_VAE2,TLBI_VAE2" wgroup.quad spr:0x14875++0x00 line.quad 0x00 "TLBI_VALE2,TLBI_VALE2" wgroup.quad spr:0x14876++0x00 line.quad 0x00 "TLBI_VMALLS12E1,TLBI_VMALLS12E1" wgroup.quad spr:0x14831++0x00 line.quad 0x00 "TLBI_VAE2IS,TLBI_VAE2IS" wgroup.quad spr:0x14835++0x00 line.quad 0x00 "TLBI_VALE2IS,TLBI_VALE2IS" wgroup.quad spr:0x14836++0x00 line.quad 0x00 "TLBI_VMALLS12E1IS,TLBI_VMALLS12E1IS" wgroup.quad spr:0x16871++0x00 line.quad 0x00 "TLBI_VAE3,TLBI_VAE3" wgroup.quad spr:0x16875++0x00 line.quad 0x00 "TLBI_VALE3,TLBI_VALE3" wgroup.quad spr:0x16831++0x00 line.quad 0x00 "TLBI_VAE3IS,TLBI_VAE3IS" wgroup.quad spr:0x16835++0x00 line.quad 0x00 "TLBI_VALE3IS,TLBI_VALE3IS" wgroup.quad spr:0x14870++0x00 line.quad 0x00 "TLBI_ALLE2,TLBI_ALLE2" wgroup.quad spr:0x14830++0x00 line.quad 0x00 "TLBI_ALLE2IS,TLBI_ALLE2IS" wgroup.quad spr:0x14874++0x00 line.quad 0x00 "TLBI_ALLE1,TLBI_ALLE1" wgroup.quad spr:0x14834++0x00 line.quad 0x00 "TLBI_ALLE1IS,TLBI_ALLE1IS" wgroup.quad spr:0x16870++0x00 line.quad 0x00 "TLBI_ALLE3,TLBI_ALLE3" wgroup.quad spr:0x16830++0x00 line.quad 0x00 "TLBI_ALLE3IS,TLBI_ALLE3IS" tree.end tree "Memory Management Unit" group.quad spr:0x30100++0x0 line.quad 0x00 "SCTLR_EL1,System Control Register (EL1)" bitfld.quad 0x00 26. "UCI,EL0 access enable (DC CVAU|DC CIVAC|DC CVAC|IC IVAU)" "Disabled,Enabled" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" newline bitfld.quad 0x00 24. "E0E,Endianness of explicit data access at EL0" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.quad 0x00 18. "NTWE,Not trap WFE" "No,Yes" bitfld.quad 0x00 16. "NTWI,Not trap WFI" "No,Yes" newline bitfld.quad 0x00 15. "UCT,EL0 access enable (CTR_EL0)" "Disabled,Enabled" bitfld.quad 0x00 14. "DZE,EL0 access enable (DC ZVA)" "Disabled,Enabled" newline bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.quad 0x00 9. "UMA,User Mask Access" "Disabled,Enabled" newline bitfld.quad 0x00 8. "SED,SETEND Disable" "No,Yes" bitfld.quad 0x00 7. "ITD,IT instruction disable" "No,Yes" newline bitfld.quad 0x00 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled" bitfld.quad 0x00 4. "SA0,EL0 stack alignment check enable" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x34100++0x0 line.quad 0x00 "SCTLR_EL2,System Control Register (EL2)" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" newline bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x36100++0x0 line.quad 0x00 "SCTLR_EL3,System Control Register (EL3)" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" newline bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x30200++0x00 line.quad 0x00 "TTBR0_EL1,Translation Table Base Register 0 (EL1)" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 0.--47. 0x01 "BADDR,Translation table base address" group.quad spr:0x30201++0x00 line.quad 0x00 "TTBR1_EL1,Translation Table Base Register 1 (EL1)" hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 0.--47. 0x01 "BADDR,Translation table base address" group.quad spr:0x34200++0x00 line.quad 0x00 "TTBR0_EL2,Translation Table Base Register 0 (EL2)" hexmask.quad 0x00 1.--47. 0x02 "BADDR,Translation table base address" group.quad spr:0x36200++0x00 line.quad 0x00 "TTBR0_EL3,Translation Table Base Register 0 (EL3)" hexmask.quad 0x00 0.--47. 0x01 "BADDR,Translation table base address" group.quad spr:0x30202++0x00 line.quad 0x00 "TCR_EL1,Translation Control Register (EL1)" bitfld.quad 0x00 38. "TBI1,Top Byte Ignored 1" "Not ignored,Ignored" bitfld.quad 0x00 37. "TBI0,Top Byte Ignored 0" "Not ignored,Ignored" newline bitfld.quad 0x00 36. "AS,ASID size" "8-bit,16-bit" bitfld.quad 0x00 32.--34. "IPS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,?..." newline bitfld.quad 0x00 30.--31. "TG1,TTBR1_EL1 granule size" "Reserved,16 KB,4 KB,64 KB" bitfld.quad 0x00 28.--29. "SH1,Shareability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable" newline bitfld.quad 0x00 26.--27. "ORGN1,Outer cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.quad 0x00 24.--25. "IRGN1,Inner cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.quad 0x00 23. "EPD1,Translation table walk disable for translations using TTBR1_EL1" "Enabled,Disabled" bitfld.quad 0x00 22. "A1,Selects whether TTBR0_EL1 or TTBR1_EL1 defines the ASID" "TTBR0_EL1,TTBR1_EL1" newline bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region addressed by TTBR1_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL1 granule size" "4 KB,64 KB,16 KB,?..." newline bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable" bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.quad 0x00 7. "EPD0,Translation table walk disable for translations using TTBR0" "Enabled,Disabled" newline bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.quad spr:0x34202++0x00 line.quad 0x00 "TCR_EL2,Translation Control Register (EL2)" bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored" bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,?..." newline bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL2 granule size" "4 KB,64 KB,16 KB,?..." bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-shareable,Reserved,Outer shareable,Inner shareable" newline bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.quad spr:0x36202++0x00 line.quad 0x00 "TCR_EL3,Translation Control Register (EL3)" bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored" bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,?..." newline bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL3 granule size" "4 KB,64 KB,16 KB,?..." bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-shareable,Reserved,Outer shareable,Inner shareable" newline bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.quad spr:0x34300++0x00 line.quad 0x00 "DACR32_EL2,Domain Access Control Register" bitfld.quad 0x00 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager" newline bitfld.quad 0x00 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager" bitfld.quad 0x00 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager" if (((per.q(spr:0x30740))&0xF000000000000001)==0x0000000000000000) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read" bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Device-nGnRnE,Reserved,Reserved,Reserved,Device-not nGnRnE,?..." newline hexmask.quad 0x00 12.--47. 0x10 "PA[47:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif (((per.q(spr:0x30740))&0x01)==0x00) group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read" bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Reserved,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read" newline hexmask.quad 0x00 12.--47. 0x10 "PA[47:12],Physical Address" bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" else group.quad spr:0x30740++0x00 line.quad 0x00 "PAR_EL1,Physical Address Register" newline bitfld.quad 0x00 9. "S,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2" bitfld.quad 0x00 8. "PTW,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes" newline bitfld.quad 0x00 1.--6. "FST,Fault status field" "Address size/L0/TTBR,Address size/L1,Address size/L2,Address size/L3,Translation/L0,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Reserved,Reserved,Reserved,Reserved,Sync. external abort/L0,Sync. external abort/L1,Sync. external abort/L2,Sync. external abort/L3,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Atomic/AArch64,?..." newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" endif tree.open "Memory Attribute Indirection Registers" group.quad spr:0x30A20++0x00 line.quad 0x00 "MAIR_EL1,Memory Attribute Indirection Register" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" group.quad spr:0x34A20++0x00 line.quad 0x00 "MAIR_EL2,Memory Attribute Indirection Register" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" group.quad spr:0x36A20++0x00 line.quad 0x00 "MAIR_EL3,Memory Attribute Indirection Register" bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" newline bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient/W allocate,Normal Memory/Outer Write-through transient/R allocate,Normal Memory/Outer Write-through transient/RW allocate,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient/W allocate,Normal Memory/Outer Write-back transient/R allocate,Normal Memory/Outer Write-back transient/RW allocate,Normal Memory/Outer Write-through non-transient/RW no allocate,Normal Memory/Outer Write-through non-transient/W allocate,Normal Memory/Outer Write-through non-transient/R allocate,Normal Memory/Outer Write-through non-transient/RW allocate,Normal Memory/Outer Write-back non-transient/RW no allocate,Normal Memory/Outer Write-back non-transient/W allocate,Normal Memory/Outer Write-back non-transient/R allocate,Normal Memory/Outer Write-back non-transient/RW allocate" bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient/W allocate,---/Inner Write-through transient/R allocate,---/Inner Write-through transient/RW allocate,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient/W allocate,---/Inner Write-back transient/R allocate,---/Inner Write-back transient/RW allocate,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient/W allocate,---/Inner Write-through non-transient/R allocate,---/Inner Write-through non-transient/RW allocate,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient/W allocate,---/Inner Write-back non-transient/R allocate,---/Inner Write-back non-transient/RW allocate" group.quad spr:0x30A30++0x00 line.quad 0x00 "AMAIR_EL1,Memory Attribute Indirection Register (EL1)" group.quad spr:0x34A30++0x00 line.quad 0x00 "AMAIR_EL2,Memory Attribute Indirection Register (EL2)" group.quad spr:0x36A30++0x00 line.quad 0x00 "AMAIR_EL3,Memory Attribute Indirection Register (EL3)" tree.end newline group.quad spr:0x30D01++0x00 line.quad 0x00 "CONTEXTIDR_EL1,Context ID Register" tree.end tree "Virtualization Extensions" group.quad spr:0x34100++0x0 line.quad 0x00 "SCTLR_EL2,System Control Register (EL2)" bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big" bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled" bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled" bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled" newline bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad spr:0x34110++0x00 line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register" bitfld.quad 0x00 33. "ID,Stage 2 instruction cache disable" "No,Yes" bitfld.quad 0x00 32. "CD,Stage 2 data cache disable" "No,Yes" bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,AArch64" newline bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled" bitfld.quad 0x00 28. "TDZ,Traps DC ZVA instruction" "Disabled,Enabled" bitfld.quad 0x00 27. "TGE,Trap General Exceptions" "Disabled,Enabled" newline bitfld.quad 0x00 26. "TVM,Trap Virtual Memory Controls" "Disabled,Enabled" bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions" "Disabled,Enabled" bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to point of unification" "Disabled,Enabled" newline bitfld.quad 0x00 23. "TPC,Trap Data/Unified cache maintenance instructions to point of coherency" "Disabled,Enabled" bitfld.quad 0x00 22. "TSW,Trap Data/Unified cache Set/Way instructions" "Disabled,Enabled" bitfld.quad 0x00 21. "TAC,Trap Auxiliary Control Register Accesses" "Disabled,Enabled" newline bitfld.quad 0x00 20. "TIDCP,Trap Lockdown" "Disabled,Enabled" bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled" bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled" newline bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled" bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled" bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled" newline bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled" bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled" bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled" newline bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability Upgrade" "No effect,Inner Shareable,Outer Shareable,Full system" bitfld.quad 0x00 9. "FB,Force Broadcast of TLB maintenance BPIALL and ICIALLU instructions" "Disabled,Enabled" bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort" "Not aborted,Aborted" newline bitfld.quad 0x00 7. "VI,Virtual IRQ interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 6. "VF,Virtual FIQ interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 5. "AMO,A-bit Mask Override" "Not routed,Routed" newline bitfld.quad 0x00 4. "IMO,I-bit Mask Override" "Not routed,Routed" bitfld.quad 0x00 3. "FMO,F-bit Mask Override" "Not routed,Routed" bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled" newline bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override" bitfld.quad 0x00 0. "VM,Second Stage of Translation Enable" "Disabled,Enabled" group.quad spr:0x34111++0x00 line.quad 0x00 "MDCR_EL2,Hypervisor Debug Control Register (EL2)" bitfld.quad 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid" bitfld.quad 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid" bitfld.quad 0x00 9. "TDA,Trap Debug Access" "No effect,Valid" newline bitfld.quad 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid" bitfld.quad 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled" bitfld.quad 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid" newline bitfld.quad 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid" bitfld.quad 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6" group.quad spr:0x34112++0x00 line.quad 0x00 "CPTR_EL2,Architectural Feature Trap Register (EL2)" bitfld.quad 0x00 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped" bitfld.quad 0x00 10. "TFP,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution from a lower exception level to EL2" "Not trapped,Trapped" group.quad spr:0x36131++0x00 line.quad 0x00 "MDCR_EL3,Hypervisor Debug Control Register (EL3)" bitfld.quad 0x00 21. "EPMAD,External debugger access to Performance Monitors registers disabled" "No,Yes" bitfld.quad 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint registers disabled" "No,Yes" bitfld.quad 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled" newline bitfld.quad 0x00 16. "SDD,AArch64 secure debug disable" "No,Yes" bitfld.quad 0x00 14.--15. "SPD32,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled" bitfld.quad 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid" newline bitfld.quad 0x00 9. "TDA,Trap Debug Access" "No effect,Valid" bitfld.quad 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid" group.quad spr:0x36112++0x00 line.quad 0x00 "CPTR_EL3,Architectural Feature Trap Register (EL3)" bitfld.quad 0x00 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped" bitfld.quad 0x00 10. "TFP,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution from a lower exception level to EL2" "Not trapped,Trapped" group.quad spr:0x34113++0x00 line.quad 0x00 "HSTR_EL2,Hypervisor System Trap Register" bitfld.quad 0x00 16. "TTEE,Trap ThumbEE" "Not supported,?..." bitfld.quad 0x00 15. "T15,Trap coprocessor primary register CRn = 15" "No effect,Trapped" bitfld.quad 0x00 13. "T13,Trap coprocessor primary register CRn = 13" "No effect,Trapped" newline bitfld.quad 0x00 12. "T12,Trap coprocessor primary register CRn = 12" "No effect,Trapped" bitfld.quad 0x00 11. "T11,Trap coprocessor primary register CRn = 11" "No effect,Trapped" bitfld.quad 0x00 10. "T10,Trap coprocessor primary register CRn = 10" "No effect,Trapped" newline bitfld.quad 0x00 9. "T9,Trap coprocessor primary register CRn = 9" "No effect,Trapped" bitfld.quad 0x00 8. "T8,Trap coprocessor primary register CRn = 8" "No effect,Trapped" bitfld.quad 0x00 7. "T7,Trap coprocessor primary register CRn = 7" "No effect,Trapped" newline bitfld.quad 0x00 6. "T6,Trap coprocessor primary register CRn = 6" "No effect,Trapped" bitfld.quad 0x00 5. "T5,Trap coprocessor primary register CRn = 5" "No effect,Trapped" bitfld.quad 0x00 3. "T3,Trap coprocessor primary register CRn = 3" "No effect,Trapped" newline bitfld.quad 0x00 2. "T2,Trap coprocessor primary register CRn = 2" "No effect,Trapped" bitfld.quad 0x00 1. "T1,Trap coprocessor primary register CRn = 1" "No effect,Trapped" bitfld.quad 0x00 0. "T0,Trap coprocessor primary register CRn = 0" "No effect,Trapped" group.quad spr:0x34117++0x00 line.quad 0x00 "HACR_EL2,Hypervisor Auxiliary Configuration Register" group.quad spr:0x34210++0x00 line.quad 0x00 "VTTBR_EL2,Virtualization Translation Table Base Register" hexmask.quad.byte 0x00 48.--55. 1. "VMID,VMID for the translation table" hexmask.quad 0x00 1.--47. 1. "BADDR,Translation table base address" group.quad spr:0x34212++0x00 line.quad 0x00 "VTCR_EL2,Virtualization Translation Control Register" bitfld.quad 0x00 16.--18. "PS,Physical Address Size" "32 bits/4GB,36 bits/64GB,40 bits/1TB,?..." bitfld.quad 0x00 14.--15. "TG0,Granule size for the corresponding translation table base address register" "4 KB,64 KB,16 KB,?..." bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "Outer Non-cacheable,Outer WB WA cacheable,Outer WT cacheable,Outer WB no WA cacheable" bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "Inner Non-cacheable,Inner WB WA cacheable,Inner WT cacheable,Inner WB no WA cacheable" bitfld.quad 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "0,1,2,3" newline bitfld.quad 0x00 0.--5. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.quad spr:0x34604++0x00 line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register" hexmask.quad 0x00 4.--39. 0x10 "FIPA,Faulting IPA bits" tree.end tree "Cache Control and Configuration" rgroup.quad spr:0x33001++0x0 line.quad 0x00 "CTR_EL0,Cache Type Register" bitfld.quad 0x00 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.quad 0x00 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.quad 0x00 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.quad 0x00 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..." bitfld.quad 0x00 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." group.quad spr:0x32000++0x0 line.quad 0x00 "CSSELR_EL1,Cache Size Selection Register" bitfld.quad 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,?..." bitfld.quad 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction" rgroup.quad spr:0x31000++0x0 line.quad 0x00 "CCSIDR_EL1,Current Cache Size ID Register" bitfld.quad 0x00 31. "WT,Write-Through" "Not Supported,?..." bitfld.quad 0x00 30. "WB,Write-Back" "Not Supported,Supported" bitfld.quad 0x00 29. "RA,Read-Allocate" "Not Supported,Supported" newline bitfld.quad 0x00 28. "WA,Write-Allocate" "Not Supported,Supported" hexmask.quad.word 0x00 13.--27. 1. 1. "SETS,Number of Sets" hexmask.quad.word 0x00 3.--12. 1. 1. "ASSOC,Associativity" newline bitfld.quad 0x00 0.--2. "LSIZE,Line Size" "Reserved,Reserved,16 words,?..." rgroup.quad spr:0x31001++0x0 line.quad 0x00 "CLIDR_EL1,Cache Level ID Register" bitfld.quad 0x00 30.--31. "ICB,Inner cache boundary" "Not disclosed,?..." bitfld.quad 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,L1 cache,?..." bitfld.quad 0x00 24.--26. "LOC,Level of Coherency" "Reserved,No L2 cache,L2 cache,?..." newline bitfld.quad 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Reserved,L2 cache,?..." bitfld.quad 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..." bitfld.quad 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,Reserved,Reserved,Reserved,Unified,?..." newline bitfld.quad 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate,?..." tree "Level 1 memory system" rgroup.quad spr:0x33F00++0x00 line.quad 0x00 "CDBGDR0_EL3,Cache Debug Data Register 0" rgroup.quad spr:0x33F01++0x00 line.quad 0x00 "CDBGDR1_EL3,Cache Debug Data Register 1" rgroup.quad spr:0x33F02++0x00 line.quad 0x00 "CDBGDR2_EL3,Cache Debug Data Register 2" rgroup.quad spr:0x33F03++0x00 line.quad 0x00 "CDBGDR3_EL3,Cache Debug Data Register 3" wgroup.quad spr:0x33F20++0x00 line.quad 0x00 "CDBGDCT_EL3,Data Cache Tag Read Operation Register" wgroup.quad spr:0x33F21++0x00 line.quad 0x00 "CDBGICT_EL3,Instruction Cache Tag Read Operation Register" wgroup.quad spr:0x33F40++0x00 line.quad 0x00 "CDBGDCD_EL3,Data Cache Data Read Operation Register" wgroup.quad spr:0x33F41++0x00 line.quad 0x00 "CDBGICD_EL3,Instruction Cache Data Read Operation Register" wgroup.quad spr:0x33F42++0x00 line.quad 0x00 "CDBGTD_EL3,TLB Data Read Operation Register" if (((per.q(spr:0x31F22))&0x7F000000)==0x000000000) group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Way 0,Way 1,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(spr:0x31F22))&0x7F000000)==0x01000000) group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Bank 0,Bank 1,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(spr:0x31F22))&0x7F000000)==0x08000000) group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Way 0,Way 1,Way 2,Way 3,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(spr:0x31F22))&0x7F000000)==0x09000000) group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Bank 0,Bank 1,Bank 2,Bank 3,Bank 4,Bank 5,Bank 6,Bank 7" newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(spr:0x31F22))&0x7F000000)==0x0A000000) group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Dirty RAM,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(spr:0x31F22))&0x7F000000)==0x18000000) group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Way 0,Way 1,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" else group.quad spr:0x31F22++0x00 line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register EL1" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" endif tree.end tree "Level 2 memory system" group.quad spr:0x31B02++0x0 line.quad 0x00 "L2CTLR_EL1,L2 Control Register" bitfld.quad 0x00 24.--25. "NCPU,Number of CPU" "1,2,3,4" bitfld.quad 0x00 22. "CPUCP,CPU Cache Protection" "Not implemented,ECC implemented" bitfld.quad 0x00 21. "SCUL2CP,SCU-L2 Cache Protection" "Not implemented,ECC implemented" newline bitfld.quad 0x00 5. "DRAMIL,L2 data RAM input latency" "1 cycle,2 cycles" bitfld.quad 0x00 0. "DRAMOL,L2 data RAM output latency" "2 cycles,3 cycles" group.quad spr:0x31B03++0x0 line.quad 0x00 "L2ECTLR_EL1,L2 Extended Control Register" bitfld.quad 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error" bitfld.quad 0x00 29. "AACASYNCERR,AXI/ACE/CHI asynchronous error" "No error,Error" bitfld.quad 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks" group.quad spr:0x31F00++0x00 line.quad 0x00 "L2ACTLR_EL1,L2 Auxiliary Control Register" bitfld.quad 0x00 30.--31. "L2VC,L2 victim Control" "0,1,2,3" bitfld.quad 0x00 29. "L2DEIEN,L2 cache data RAM error injection enable" "Disabled,Enabled" bitfld.quad 0x00 24. "L2TEIEN,L2 cache tag RAM error injection enable" "Disabled,Enabled" newline bitfld.quad 0x00 14. "EUCE,Enables UniqueClean evictions with data" "Disabled,Enabled" bitfld.quad 0x00 3. "DCEPTE,Disables clean/evict push to external" "No,Yes" if (((per.q(spr:0x31F23))&0x7F000000)==0x10000000) group.quad spr:0x31F23++0x00 line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--21. "C/W,Indicates the RAM where the first memory error occurred" "Way 0,Way 1,Way 2,Way 3,Way 4,Way 5,Way 6,Way 7,?..." newline hexmask.quad.word 0x00 3.--16. 1. "IND,Index" elif (((per.q(spr:0x31F23))&0x7F000000)==0x11000000) group.quad spr:0x31F23++0x00 line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--21. "C/W,Indicates the RAM where the first memory error occurred" "Bank 0,Bank 1,Bank 2,Bank 3,Bank 4,Bank 5,Bank 6,Bank 7,?..." newline hexmask.quad.word 0x00 3.--16. 1. "IND,Index" elif (((per.q(spr:0x31F23))&0x7F000000)==0x12000000) group.quad spr:0x31F23++0x00 line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--21. "C/W,Indicates the RAM where the first memory error occurred" "CPU0/Way 0,CPU0/Way 1,CPU0/Way 2,CPU0/Way 3,CPU1/Way 0,CPU1/Way 1,CPU1/Way 2,CPU1/Way 3,CPU2/Way 0,CPU2/Way 1,CPU2/Way 2,CPU2/Way 3,CPU3/Way 0,CPU3/Way 1,CPU3/Way 2,CPU3/Way 3" newline hexmask.quad.word 0x00 3.--16. 1. "IND,Index" else group.quad spr:0x31F23++0x00 line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" newline bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" hexmask.quad.word 0x00 3.--16. 1. "IND,Index" endif tree.end tree.end tree "System Performance Monitor" group.quad spr:0x339C0++0x00 line.quad 0x00 "PMCR_EL0,Performance Monitor Control Register" rhexmask.quad.byte 0x00 24.--31. 1. "IMP,Implementer code" rhexmask.quad.byte 0x00 16.--23. 1. "IDCODE,Identification code" rbitfld.quad 0x00 11.--15. "N,Number of counters implemented" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,6,?..." bitfld.quad 0x00 6. "LC,Long cycle count enable" "Disabled,Enabled" newline bitfld.quad 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes" bitfld.quad 0x00 4. "X,Export Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "D,Clock Divider" "Every cycle,64th cycle" eventfld.quad 0x00 2. "C,Clock Counter Reset" "No reset,Reset" newline eventfld.quad 0x00 1. "P,Performance Counter Reset" "No reset,Reset" bitfld.quad 0x00 0. "E,All Counters enable" "Disabled,Enabled" group.quad spr:0x339C1++0x00 line.quad 0x00 "PMCNTENSET_EL0,Count Enable Set Register " bitfld.quad 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" bitfld.quad 0x00 5. "P5,Event Counter 5 enable bit" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,Event Counter 4 enable bit" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,Event Counter 3 enable bit" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,Event Counter 2 enable bit" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,Event Counter 1 enable bit" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,Event Counter 0 enable bit" "Disabled,Enabled" group.quad spr:0x339C2++0x00 line.quad 0x00 "PMCNTENCLR_EL0,Count Enable Clear Register" bitfld.quad 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" bitfld.quad 0x00 5. "P5,Event Counter 5 clear bit" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,Event Counter 4 clear bit" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,Event Counter 3 clear bit" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,Event Counter 2 clear bit" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,Event Counter 1 clear bit" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,Event Counter 0 clear bit" "Disabled,Enabled" group.quad spr:0x339C3++0x00 line.quad 0x00 "PMOVSCLR_EL0,Performance Monitors Overflow Flag Status Clear Register" eventfld.quad 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow" eventfld.quad 0x00 5. "P5,Event Counter 5 overflow clear bit" "Disabled,Enabled" eventfld.quad 0x00 4. "P4,Event Counter 4 overflow clear bit" "Disabled,Enabled" eventfld.quad 0x00 3. "P3,Event Counter 3 overflow clear bit" "Disabled,Enabled" newline eventfld.quad 0x00 2. "P2,Event Counter 2 overflow clear bit" "Disabled,Enabled" eventfld.quad 0x00 1. "P1,Event Counter 1 overflow clear bit" "Disabled,Enabled" eventfld.quad 0x00 0. "P0,Event Counter 0 overflow clear bit" "Disabled,Enabled" wgroup.quad spr:0x339C4++0x00 line.quad 0x00 "PMSWINC_EL0,Performance Monitor Software Increment" bitfld.quad 0x00 5. "P5,Increment PMN5" "No action,Increment" bitfld.quad 0x00 4. "P4,Increment PMN4" "No action,Increment" bitfld.quad 0x00 3. "P3,Increment PMN3" "No action,Increment" bitfld.quad 0x00 2. "P2,Increment PMN2" "No action,Increment" newline bitfld.quad 0x00 1. "P1,Increment PMN1" "No action,Increment" bitfld.quad 0x00 0. "P0,Increment PMN0" "No action,Increment" group.quad spr:0x339C5++0x00 line.quad 0x00 "PMSELR_EL0,Performance Monitor Select Register" bitfld.quad 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.open "Common Event Identification Registers" rgroup.quad spr:0x339C6++0x00 line.quad 0x00 "PMCEID0_EL0,Common Event Identification Register" bitfld.quad 0x00 31. "L1D_CACHE_ALLOCATE,Level 1 data cache allocate" "Not implemented,?..." bitfld.quad 0x00 30. "CHAIN,Chain" "Reserved,Implemented" bitfld.quad 0x00 29. "BUS_CYCLES,Bus cycle" "Reserved,Implemented" newline bitfld.quad 0x00 28. "TTBR_WRITE_RETIRED,TTBR write retired" "Not implemented,?..." bitfld.quad 0x00 27. "INST_SPEC,Instruction speculatively executed" "Reserved,Implemented" bitfld.quad 0x00 26. "MEMORY_ERROR,Local memory error" "Reserved,Implemented" newline bitfld.quad 0x00 25. "BUS_ACCESS,Bus access" "Reserved,Implemented" bitfld.quad 0x00 24. "L2D_CACHE_WB,Level 2 data cache write-back" "Not implemented,Implemented" bitfld.quad 0x00 23. "L2D_CACHE_REFILL,Level 2 data cache refill" "Not implemented,Implemented" newline bitfld.quad 0x00 22. "L2D_CACHE,Level 2 data cache access" "Not implemented,Implemented" bitfld.quad 0x00 21. "L1D_CACHE_WB,Level 1 data cache write-back" "Reserved,Implemented" bitfld.quad 0x00 20. "L1I_CACHE,Level 1 instruction cache access" "Reserved,Implemented" newline bitfld.quad 0x00 19. "MEM_ACCESS,Data memory access" "Reserved,Implemented" bitfld.quad 0x00 18. "BR_PRED,Predictable branch speculatively executed" "Reserved,Implemented" bitfld.quad 0x00 17. "CPU_CYCLES,CPU Cycle" "Reserved,Implemented" newline bitfld.quad 0x00 16. "BR_MIS_PRED,Mispredicted or not predicted branch speculatively executed" "Reserved,Implemented" bitfld.quad 0x00 15. "UNALIGNED_LDST_RETIRED,UNALIGNED_LDST_RETIRED" "Reserved,Implemented" bitfld.quad 0x00 14. "BR_RETURN_RETIRED,Instruction architecturally executed condition check pass procedure return" "Not implemented,?..." newline bitfld.quad 0x00 13. "BR_IMMED_RETIRED,Instruction architecturally executed immediate branch" "Reserved,Implemented" bitfld.quad 0x00 12. "PC_WRITE_RETIRED,Instruction architecturally executed condition check pass software change of the PC" "Reserved,Implemented" bitfld.quad 0x00 11. "CID_WRITE_RETIRED,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Reserved,Implemented" newline bitfld.quad 0x00 10. "EXC_RETURN,Instruction architecturally executed condition check pass exception return" "Reserved,Implemented" bitfld.quad 0x00 9. "EXC_TAKEN,Exception taken" "Reserved,Implemented" bitfld.quad 0x00 8. "INST_RETIRED,Instruction architecturally executed" "Reserved,Implemented" newline bitfld.quad 0x00 7. "ST_RETIRED,Instruction architecturally executed condition check pass store" "Reserved,Implemented" bitfld.quad 0x00 6. "LD_RETIRED,Instruction architecturally executed condition check pass load" "Reserved,Implemented" bitfld.quad 0x00 5. "L1D_TLB_REFILL,Level 1 data TLB refill" "Reserved,Implemented" newline bitfld.quad 0x00 4. "L1D_CACHE,Level 1 data cache access" "Reserved,Implemented" bitfld.quad 0x00 3. "L1D_CACHE_REFILL,Level 1 data cache refill" "Reserved,Implemented" bitfld.quad 0x00 2. "L1I_TLB_REFILL,Level 1 instruction TLB refill" "Reserved,Implemented" newline bitfld.quad 0x00 1. "L1I_CACHE_REFILL,Level 1 instruction cache refill" "Reserved,Implemented" bitfld.quad 0x00 0. "SW_INCR,Instruction architecturally executed condition check pass software increment" "Reserved,Implemented" rgroup.quad spr:0x339C7++0x00 line.quad 0x00 "PMCEID1_EL0,Common Event Identification Register" bitfld.quad 0x00 16. "L2I_TLB,Attributable Level 2 instruction TLB access" "Not implemented,?..." bitfld.quad 0x00 15. "L2D_TLB,Attributable Level 2 data or unified TLB access" "Not implemented,?..." bitfld.quad 0x00 14. "L2I_TLB_REFILL,Attributable Level 2 instruction TLB refill" "Not implemented,?..." newline bitfld.quad 0x00 13. "L2D_TLB_REFIL,Attributable Level 2 data or unified TLB refill" "Not implemented,?..." bitfld.quad 0x00 12. "L3D_CACHE_WB,Attributable Level 3 data or unified cache write-back" "Not implemented,?..." bitfld.quad 0x00 11. "L3D_CACHE,Attributable Level 3 data or unified cache access" "Not implemented,?..." newline bitfld.quad 0x00 10. "L3D_CACHE_REFILL,Attributable Level 3 data or unified cache refill" "Not implemented,?..." bitfld.quad 0x00 9. "L3D_CACHE_ALLOCATE,Attributable Level 3 data or unified cache allocation without refill" "Not implemented,?..." bitfld.quad 0x00 8. "L2I_CACHE_REFILL,Attributable Level 2 instruction cache refill" "Not implemented,?..." newline bitfld.quad 0x00 7. "L2I_CACHE,Attributable Level 2 instruction cache access" "Not implemented,?..." bitfld.quad 0x00 6. "L1I_TLB,Level 1 instruction TLB access" "Not implemented,?..." bitfld.quad 0x00 5. "L1D_TLB,Level 1 data or unified TLB access" "Not implemented,?..." newline bitfld.quad 0x00 4. "STALL_BACKEND,No operation issued due to backend" "Not implemented,?..." bitfld.quad 0x00 3. "STALL_FRONTEND,No operation issued due to the frontend" "Not implemented,?..." bitfld.quad 0x00 2. "BR_MIS_PRED_RETIRED,Instruction architecturally executed mispredicted branch" "Not implemented,?..." newline bitfld.quad 0x00 1. "BR_RETIRED,Instruction architecturally executed branch" "Not implemented,?..." bitfld.quad 0x00 0. "L2D_CACHE_ALLOCATE,Level 2 data cache allocation without refill" "Not implemented,?..." tree.end newline group.quad spr:0x339D0++0x00 line.quad 0x00 "PMCCNTR_EL0,Performance Monitor Cycle Count Register" if (((per.q(spr:0x339C5))&0x1F)==0x1F) group.quad spr:0x339D1++0x00 line.quad 0x00 "PMXEVTYPER_EL0,Performance Monitor Event Type Register" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" else group.quad spr:0x339D1++0x00 line.quad 0x00 "PMXEVTYPER_EL0,Performance Monitor Event Type Register" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" endif group.quad spr:0x339D2++0x00 line.quad 0x00 "PMXEVCNTR_EL0,Performance Monitor Event Count Register" group.quad spr:0x339E0++0x00 line.quad 0x00 "PMUSERENR_EL0,Performance Monitor User Enable Register" bitfld.quad 0x00 3. "ER,Event counter read enable" "Disabled,Enabled" bitfld.quad 0x00 2. "EC,Cycle counter read enable" "Disabled,Enabled" bitfld.quad 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled" bitfld.quad 0x00 0. "EN,User mode access enable" "Disabled,Enabled" group.quad spr:0x309E1++0x00 line.quad 0x00 "PMINTENSET_EL1,Performance Monitor Interrupt Enable Set" bitfld.quad 0x00 31. "C,Cycle counter Overflow Interrupt clear" "Disabled,Enabled" bitfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.quad spr:0x309E2++0x00 line.quad 0x00 "PMINTENCLR_EL1,Performance Monitor Interrupt Enable Clear" eventfld.quad 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" eventfld.quad 0x00 5. "P5,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.quad 0x00 4. "P4,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.quad 0x00 3. "P3,Overflow Interrupt Clear" "Disabled,Enabled" newline eventfld.quad 0x00 2. "P2,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.quad 0x00 1. "P1,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.quad 0x00 0. "P0,Overflow Interrupt Clear" "Disabled,Enabled" group.quad spr:0x339E3++0x00 line.quad 0x00 "PMOVSSET_EL0,Performance Monitor Overflow Flag Status Set Register" bitfld.quad 0x00 31. "C,Cycle counter Overflow Interrupt clear" "Disabled,Enabled" bitfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.quad spr:0x33E80++0x00 line.quad 0x00 "PMEVCNTR0_EL0,Performance Monitors Event Count Register 0" group.quad spr:(0x33E80+0x40)++0x00 line.quad 0x00 "PMEVTYPER0_EL0,Performance Monitors Selected Event Type Register 0" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.quad spr:0x33E81++0x00 line.quad 0x00 "PMEVCNTR1_EL0,Performance Monitors Event Count Register 1" group.quad spr:(0x33E81+0x40)++0x00 line.quad 0x00 "PMEVTYPER1_EL0,Performance Monitors Selected Event Type Register 1" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.quad spr:0x33E82++0x00 line.quad 0x00 "PMEVCNTR2_EL0,Performance Monitors Event Count Register 2" group.quad spr:(0x33E82+0x40)++0x00 line.quad 0x00 "PMEVTYPER2_EL0,Performance Monitors Selected Event Type Register 2" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.quad spr:0x33E83++0x00 line.quad 0x00 "PMEVCNTR3_EL0,Performance Monitors Event Count Register 3" group.quad spr:(0x33E83+0x40)++0x00 line.quad 0x00 "PMEVTYPER3_EL0,Performance Monitors Selected Event Type Register 3" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.quad spr:0x33E84++0x00 line.quad 0x00 "PMEVCNTR4_EL0,Performance Monitors Event Count Register 4" group.quad spr:(0x33E84+0x40)++0x00 line.quad 0x00 "PMEVTYPER4_EL0,Performance Monitors Selected Event Type Register 4" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.quad spr:0x33E85++0x00 line.quad 0x00 "PMEVCNTR5_EL0,Performance Monitors Event Count Register 5" group.quad spr:(0x33E85+0x40)++0x00 line.quad 0x00 "PMEVTYPER5_EL0,Performance Monitors Selected Event Type Register 5" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.quad spr:0x33EF7++0x00 line.quad 0x00 "PMCCFILTR_EL0,Performance Monitors Cycle Count Filter Register" bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled" tree.end tree "System Timer Registers" group.quad spr:0x33E00++0x00 line.quad 0x00 "CNTFRQ_EL0,Counter-timer Frequency Register" hexmask.quad.long 0x00 0.--31. 1. "CF,Clock frequency" rgroup.quad spr:0x33E01++0x00 line.quad 0x00 "CNTPCT_EL0,Counter-timer Physical Count Register" rgroup.quad spr:0x33E02++0x00 line.quad 0x00 "CNTVCT_EL0,Counter-timer Virtual Count Register" group.quad spr:0x34E03++0x00 line.quad 0x00 "CNTVOFF_EL2,Counter-timer Virtual Offset Register" group.quad spr:0x30E10++0x00 line.quad 0x00 "CNTKCTL_EL1,Counter-timer Kernel Control Register" bitfld.quad 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from that counter when that stream is enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI generates an event when the event stream is enabled" "0 to 1,1 to 0" newline bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the corresponding counter" "Disabled,Enabled" bitfld.quad 0x00 1. "EL0VCTEN,Controls whether the virtual counter CNTVCT and the frequency Register CNTFRQ are accessible from EL0 mode" "Disabled,Enabled" bitfld.quad 0x00 0. "EL0PCTEN,Controls whether the physical counter CNTPCT and the frequency Register CNTFRQ are accessible from EL0 mode" "Disabled,Enabled" group.quad spr:0x34E10++0x00 line.quad 0x00 "CNTHCTL_EL2,Counter-timer Hypervisor Control Register" bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTPCT is the trigger for the event stream generated from the physical counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit defined by EVNTI generates an event when the event stream is enabled" "0 to 1,1 to 0" bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the physical counter" "Disabled,Enabled" bitfld.quad 0x00 1. "EL1PCEN,Controls whether the physical timer registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" newline bitfld.quad 0x00 0. "EL1PCTEN,Controls whether the physical counter CNTPCT is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" group.quad spr:0x33E20++0x00 line.quad 0x00 "CNTP_TVAL_EL0,Counter-timer Physical Timer TimerValue Register" hexmask.quad.long 0x00 0.--31. 1. "TV,TimerValue view of the EL1 physical timer" group.quad spr:0x33E21++0x00 line.quad 0x00 "CNTP_CTL_EL0,Counter-timer Physical Timer Control Register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x33E22++0x00 line.quad 0x00 "CNTP_CVAL_EL0,Counter-timer Physical Timer CompareValue Register" group.quad spr:0x33E30++0x00 line.quad 0x00 "CNTV_TVAL_EL0,Counter-timer Virtual Timer TimerValue Register" hexmask.quad.long 0x00 0.--31. 1. "TV,TimerValue view of the EL1 virtual timer" group.quad spr:0x33E31++0x00 line.quad 0x00 "CNTV_CTL_EL0,Counter-timer Virtual Timer Control Register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x33E32++0x00 line.quad 0x00 "CNTV_CVAL_EL0,Counter-timer Virtual Timer CompareValue Register" group.quad spr:0x34E20++0x00 line.quad 0x00 "CNTHP_TVAL_EL2,Counter-timer Hypervisor Physical Timer TimerValue Register" hexmask.quad.long 0x00 0.--31. 1. "TV,TimerValue view of the EL2 physical timer" group.quad spr:0x34E21++0x00 line.quad 0x00 "CNTHP_CTL_EL2,Counter-timer Hypervisor Physical Timer Control Register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x34E22++0x00 line.quad 0x00 "CNTHP_CVAL_EL2,Counter-timer Hypervisor Physical Timer CompareValue Register" group.quad spr:0x37E20++0x00 line.quad 0x00 "CNTPS_TVAL_EL1,Counter-timer Physical Secure Timer TimerValue Register" hexmask.quad.long 0x00 0.--31. 1. "TV,TimerValue view of the secure physical timer" group.quad spr:0x37E21++0x00 line.quad 0x00 "CNTPS_CTL_EL1,Counter-timer Physical Secure Timer Control Register" rbitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "IMASK,Timer interrupt mask" "Not masked,Masked" bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" group.quad spr:0x37E22++0x00 line.quad 0x00 "CNTPS_CVAL_EL1,Counter-timer Physical Secure Timer CompareValue Register" tree.end tree "Generic Interrupt Controller System Registers" tree "AArch64 GIC Physical CPU Interface System Registers" tree.open "Interrupt Controller Active Priorities Registers" group.quad spr:0x30C84++0x00 line.quad 0x00 "ICC_AP0R0_EL1,Interrupt Controller Active Priorities Group 0 Register 0 (EL1)" bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.quad spr:0x30C90++0x00 line.quad 0x00 "ICC_AP1R0_EL1,Interrupt Controller Active Priorities Group 1 Register 0 (EL1)" bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline if (((per.q(spr:0x30CB6))&0x10000000000)==0x00) wgroup.quad spr:0x30CB6++0x00 line.quad 0x00 "ICC_ASGI1R_EL1,Interrupt Controller Alias Software Generated Interrupt Group 1 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated" else wgroup.quad spr:0x30CB6++0x00 line.quad 0x00 "ICC_ASGI1R_EL1,Interrupt Controller Alias Software Generated Interrupt Group 1 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.quad spr:0x30C83++0x00 line.quad 0x00 "ICC_BPR0_EL1,Interrupt Controller Binary Point Register 0" bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control and Interrupt Preemption Control" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.quad spr:0x30CC3++0x00 line.quad 0x00 "ICC_BPR1_EL1,Interrupt Controller Binary Point Register 1" bitfld.quad 0x00 0.--2. "BINARYPOINT,Interrupt Priority Field Control and Interrupt Preemption Control" "Reserved,[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" group.quad spr:0x30CC4++0x00 line.quad 0x00 "ICC_CTLR_EL1,Interrupt Controller Control Register (EL1)" rbitfld.quad 0x00 19. "EXTRANGE,Extended INTID range" "Reserved,Supported" rbitfld.quad 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Zero,Non-zero" rbitfld.quad 0x00 14. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported" rbitfld.quad 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..." newline rbitfld.quad 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 6. "PMHE,Controls whether the priority mask Register is used as a hint for interrupt distribution" "Disabled,Enabled" bitfld.quad 0x00 1. "EOIMODE,Controls whether a write to an End of Interrupt Register also deactivates the interrupt" "Disabled,Enabled" newline bitfld.quad 0x00 0. "CBPR,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 interrupts" "Separate registers,Same Register" group.quad spr:0x36CC4++0x00 line.quad 0x00 "ICC_CTLR_EL3,Interrupt Controller Control Register (EL3)" rbitfld.quad 0x00 19. "ExtRange,Extended INTID range" "Not supported,Supported" rbitfld.quad 0x00 18. "RSS,Range Selector Support" "0 - 15,0 - 255" newline rbitfld.quad 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported" rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported" rbitfld.quad 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,Supported" newline rbitfld.quad 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..." rbitfld.quad 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" newline bitfld.quad 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (Non-secure EL1 and EL2)" "Priority drop/Deactivation,Priority drop" bitfld.quad 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (Secure EL1)" "Priority drop/Deactivation,Priority drop" bitfld.quad 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt Register also deactivates the interrupt (EL3)" "Enabled,Disabled" newline bitfld.quad 0x00 1. "CBPR_EL1NS,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate registers,Same Register" bitfld.quad 0x00 0. "CBPR_EL1S,Controls whether the same Register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate registers,Same Register" if (((per.q(spr:0x30CC4))&0x3800)==0x00) wgroup.quad spr:0x30CB1++0x00 line.quad 0x00 "ICC_DIR_EL1,Interrupt Controller Deactivate Interrupt Register" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.quad spr:0x30C81++0x00 line.quad 0x00 "ICC_EOIR0_EL1,Interrupt Controller End Of Interrupt Register 0" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0 access" wgroup.quad spr:0x30CC1++0x00 line.quad 0x00 "ICC_EOIR1_EL1,Interrupt Controller End Of Interrupt Register 1" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1 access" rgroup.quad spr:0x30C82++0x00 line.quad 0x00 "ICC_HPPIR0_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 0" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level" rgroup.quad spr:0x30CC2++0x00 line.quad 0x00 "ICC_HPPIR1_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 1" hexmask.quad.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level" elif (((per.q(spr:0x30CC4))&0x3800)==0x800) wgroup.quad spr:0x30CB1++0x00 line.quad 0x00 "ICC_DIR_EL1,Interrupt Controller Deactivate Interrupt Register" hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.quad spr:0x30C81++0x00 line.quad 0x00 "ICC_EOIR0_EL1,Interrupt Controller End Of Interrupt Register 0" hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR0 access" wgroup.quad spr:0x30CC1++0x00 line.quad 0x00 "ICC_EOIR1_EL1,Interrupt Controller End Of Interrupt Register 1" hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR1 access" rgroup.quad spr:0x30C82++0x00 line.quad 0x00 "ICC_HPPIR0_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 0" hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level" rgroup.quad spr:0x30CC2++0x00 line.quad 0x00 "ICC_HPPIR1_EL1,Interrupt Controller Highest Priority Pending Interrupt Register 1" hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt if that interrupt is observable at the currentSecurity state and Exception level" endif hgroup.quad spr:0x30C80++0x00 hide.long 0x00 "ICC_IAR0_EL1,Interrupt Acknowledge Register 0" in hgroup.quad spr:0x30CC0++0x00 hide.long 0x00 "ICC_IAR1_EL1,Interrupt Acknowledge Register 1" in newline group.quad spr:0x30CC6++0x00 line.quad 0x00 "ICC_IGRPEN0_EL1,Interrupt Controller Interrupt Group 0 Enable Register" bitfld.quad 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.quad spr:0x30CC7++0x00 line.quad 0x00 "ICC_IGRPEN1_EL1,Interrupt Controller Interrupt Group 1 Enable Register (EL1)" bitfld.quad 0x00 0. "ENABLE,Enables Group 1 interrupts" "Disabled,Enabled" group.quad spr:0x36CC7++0x00 line.quad 0x00 "ICC_IGRPEN1_EL3,Interrupt Controller Interrupt Group 1 Enable Register (EL3)" bitfld.quad 0x00 1. "ENABLEGRP1S,Enables Group 1 interrupts for the Secure state" "Disabled,Enabled" bitfld.quad 0x00 0. "ENABLEGRP1NS,Enables Group 1 interrupts for the Non-secure state" "Disabled,Enabled" group.quad spr:0x30460++0x00 line.quad 0x00 "ICC_PMR_EL1,Interrupt Controller Interrupt Priority Mask Register" hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,The priority mask level for the CPU interface" rgroup.quad spr:0x30CB3++0x00 line.quad 0x00 "ICC_RPR_EL1,Interrupt Controller Running Priority Register" hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,The current running priority on the CPU interface" if (((per.q(spr:0x30CB7))&0x10000000000)==0x00) wgroup.quad spr:0x30CB7++0x00 line.quad 0x00 "ICC_SGI0R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated." else wgroup.quad spr:0x30CB7++0x00 line.quad 0x00 "ICC_SGI0R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif if (((per.q(spr:0x30CB5))&0x10000000000)==0x00) wgroup.quad spr:0x30CB5++0x00 line.quad 0x00 "ICC_SGI1R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,The set of PEs for which SGI interrupts will be generated" else wgroup.quad spr:0x30CB5++0x00 line.quad 0x00 "ICC_SGI1R_EL1,Interrupt Controller Software Generated Interrupt Group 0 Register" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt routing mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.quad spr:0x30CC5++0x00 line.quad 0x00 "ICC_SRE_EL1,Interrupt Controller System Register Enable Register (EL1)" bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" bitfld.quad 0x00 0. "SRE,System Register Enable" "Disabled,Enabled" group.quad spr:0x34C95++0x00 line.quad 0x00 "ICC_SRE_EL2,Interrupt Controller System Register Enable Register (EL2)" bitfld.quad 0x00 3. "ENABLE,Enables lower Exception level access to ICC_SRE_EL1" "Trapped,Not trapped" bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline bitfld.quad 0x00 0. "SRE,System Register Enable" "Disabled,Enabled" group.quad spr:0x36CC5++0x00 line.quad 0x00 "ICC_SRE_EL3,Interrupt Controller System Register Enable Register (EL3)" bitfld.quad 0x00 3. "ENABLE,Enables lower Exception level access to ICC_SRE_EL1/ICC_SRE_EL2" "Trapped,Not trapped" bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline bitfld.quad 0x00 0. "SRE,System Register Enable" "Disabled,Enabled" tree.end tree "AArch64 Virtual Interface Control System Registers" tree.open "Hypervisor Active Priorities Registers" group.quad spr:0x34C80++0x00 line.quad 0x00 "ICH_AP0R0_EL2,Interrupt Controller Hypervisor Active Priorities Group 0 Register 0" bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.quad spr:0x34C90++0x00 line.quad 0x00 "ICH_AP1R0_EL2,Interrupt Controller Hypervisor Active Priorities Group 1 Register 0" bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline rgroup.quad spr:0x34CB3++0x00 line.quad 0x00 "ICH_EISR_EL2,Interrupt Controller End of Interrupt Status Register" bitfld.quad 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register 3" "No interrupt,Interrupt" bitfld.quad 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register 2" "No interrupt,Interrupt" bitfld.quad 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register 1" "No interrupt,Interrupt" newline bitfld.quad 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register 0" "No interrupt,Interrupt" rgroup.quad spr:0x34CB5++0x00 line.quad 0x00 "ICH_ELRSR_EL2,Interrupt Controller Empty List Register Status Register" bitfld.quad 0x00 3. "STATUS3,Status bit for List register 3" "Interrupt,No interrupt" bitfld.quad 0x00 2. "STATUS2,Status bit for List register 2" "Interrupt,No interrupt" bitfld.quad 0x00 1. "STATUS1,Status bit for List register 1" "Interrupt,No interrupt" newline bitfld.quad 0x00 0. "STATUS0,Status bit for List register 0" "Interrupt,No interrupt" if (((per.q(spr:0x34CB1))&0x400000)==0x400000) group.quad spr:0x34CB0++0x00 line.quad 0x00 "ICH_HCR_EL2,Interrupt Controller Hypervisor Control Register" bitfld.quad 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped" bitfld.quad 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped" newline bitfld.quad 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped" bitfld.quad 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped" bitfld.quad 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped" newline bitfld.quad 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" else group.quad spr:0x34CB0++0x00 line.quad 0x00 "ICH_HCR_EL2,Interrupt Controller Hypervisor Control Register" bitfld.quad 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped" newline bitfld.quad 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped" bitfld.quad 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped" bitfld.quad 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped" newline bitfld.quad 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.quad 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.quad 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" endif if (((per.q(spr:0x34CC0+0x0))&0x2000000000000000)==0x00) group.quad spr:(0x34CC0+0x0)++0x00 line.quad 0x00 "ICH_LR0_EL2,Interrupt Controller List Register 0" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" else group.quad spr:(0x34CC0+0x0)++0x00 line.quad 0x00 "ICH_LR0_EL2,Interrupt Controller List Register 0" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" endif if (((per.q(spr:0x34CC0+0x1))&0x2000000000000000)==0x00) group.quad spr:(0x34CC0+0x1)++0x00 line.quad 0x00 "ICH_LR1_EL2,Interrupt Controller List Register 1" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" else group.quad spr:(0x34CC0+0x1)++0x00 line.quad 0x00 "ICH_LR1_EL2,Interrupt Controller List Register 1" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" endif if (((per.q(spr:0x34CC0+0x2))&0x2000000000000000)==0x00) group.quad spr:(0x34CC0+0x2)++0x00 line.quad 0x00 "ICH_LR2_EL2,Interrupt Controller List Register 2" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" else group.quad spr:(0x34CC0+0x2)++0x00 line.quad 0x00 "ICH_LR2_EL2,Interrupt Controller List Register 2" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" endif if (((per.q(spr:0x34CC0+0x3))&0x2000000000000000)==0x00) group.quad spr:(0x34CC0+0x3)++0x00 line.quad 0x00 "ICH_LR3_EL2,Interrupt Controller List Register 3" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" else group.quad spr:(0x34CC0+0x3)++0x00 line.quad 0x00 "ICH_LR3_EL2,Interrupt Controller List Register 3" bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Software,Hardware" bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt" hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID for hardware interrupts" hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt" endif rgroup.quad spr:0x34CB2++0x00 line.quad 0x00 "ICH_MISR_EL2,Interrupt Controller Maintenance Interrupt State Register" bitfld.quad 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted" bitfld.quad 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted" bitfld.quad 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted" newline bitfld.quad 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted" bitfld.quad 0x00 3. "NP,No Pending" "Not asserted,Asserted" bitfld.quad 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted" newline bitfld.quad 0x00 1. "U,Underflow" "Not asserted,Asserted" bitfld.quad 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted" group.quad spr:0x34CB7++0x00 line.quad 0x00 "ICH_VMCR_EL2,Interrupt Controller Virtual Machine Control Register" hexmask.quad.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface" bitfld.quad 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" bitfld.quad 0x00 18.--20. "VBPR1,Virtual Binary Point Register Group 1" "Reserved,[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" newline bitfld.quad 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Disabled,Enabled" bitfld.quad 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate registers,Same register" bitfld.quad 0x00 3. "VFIQEN,Virtual FIQ enable" "Virtual IRQs,Virtual FIQs" newline bitfld.quad 0x00 2. "VACKCTL,Virtual FIQ enable" "1022,Corresponding interrupt" bitfld.quad 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled" bitfld.quad 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled" rgroup.quad spr:0x34CB1++0x00 line.quad 0x00 "ICH_VTR_EL2,Interrupt Controller VGIC Type Register" bitfld.quad 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.quad 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..." newline bitfld.quad 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported" bitfld.quad 0x00 21. "A3V,Affinity 3 Valid" "Only zero values supported,Non-zero values supported" bitfld.quad 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,Not supported" newline bitfld.quad 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Not supported,Supported" bitfld.quad 0x00 0.--4. "LISTREGS,The number of implemented List registers minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.end tree.end tree "Debug Registers" rgroup.quad spr:0x23010++0x00 line.quad 0x00 "MDCCSR_EL0,Debug Comms Channel Status Register" bitfld.quad 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.quad 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" group.quad spr:0x20020++0x00 line.quad 0x00 "MDCCINT_EL1,Debug Comms Channel Interrupt Enable register" bitfld.quad 0x00 30. "RX,DCC interrupt enable controls" "Disabled,Enabled" bitfld.quad 0x00 29. "TX,DCC interrupt enable controls" "Disabled,Enabled" group.quad spr:0x23040++0x00 line.quad 0x00 "DBGDTR_EL0,Half Duplex Data Transfer Register" hexmask.quad.long 0x00 32.--63. 1. "HIGHWORD,Writes to this register set DTRRX to the value in this field and do not change RXfull" hexmask.quad.long 0x00 0.--31. 1. "LOWWORD,Writes to this register set DTRTX to the value in this field and set TXfull to 1" rgroup.quad spr:0x23050++0x00 line.quad 0x00 "DBGDTRRX_EL0,Full Duplex Receive Data Transfer Register" wgroup.quad spr:0x23050++0x00 line.quad 0x00 "DBGDTRTX_EL0,Full Duplex Transmit Data Transfer Register" group.quad spr:0x24070++0x00 line.quad 0x00 "DBGVCR32_EL2,Vector Catch Register" bitfld.quad 0x00 31. "NSF,FIQ vector catch enable in Non-secure state" "Low,High" bitfld.quad 0x00 30. "NSI,IRQ vector catch enable in Non-secure state" "Low,High" bitfld.quad 0x00 28. "NSD,Data Abort vector catch enable in Non-secure state" "Low,High" bitfld.quad 0x00 27. "NSP,Prefetch Abort vector catch enable in Non-secure state" "Low,High" newline bitfld.quad 0x00 26. "NSS,Supervisor Call (SVC) vector catch enable in Non-secure state" "Low,High" bitfld.quad 0x00 25. "NSU,Undefined Instruction vector catch enable in Non-secure state" "Low,High" bitfld.quad 0x00 7. "SF,FIQ vector catch enable in Secure state" "Low,High" bitfld.quad 0x00 6. "SI,IRQ vector catch enable in Secure state" "Low,High" newline bitfld.quad 0x00 4. "SD,Data Abort vector catch enable in Secure state" "Low,High" bitfld.quad 0x00 3. "SP,Prefetch Abort vector catch enable in Secure state" "Low,High" bitfld.quad 0x00 2. "SS,Supervisor Call (SVC) vector catch enable in Secure state" "Low,High" bitfld.quad 0x00 1. "SU,Undefined Instruction vector catch enable in Secure state" "Low,High" group.quad spr:0x20002++0x00 line.quad 0x00 "OSDTRRX_EL1,OS Lock Data Transfer Register" if (((per.q(spr:0x20114))&0x02)==0x02) group.quad spr:0x20022++0x00 line.quad 0x00 "MDSCR_EL1,Monitor Debug System Control Register" bitfld.quad 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.quad 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" bitfld.quad 0x00 27. "RXO,Save/restore bit" "Low,High" bitfld.quad 0x00 26. "TXU,Save/restore bit" "Low,High" newline bitfld.quad 0x00 22.--23. "INTDIS,Save/restore bits" "0,1,2,3" bitfld.quad 0x00 21. "TDA,Save/restore bit" "Low,High" bitfld.quad 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled" bitfld.quad 0x00 14. "HDE,Save/restore bit" "Low,High" newline bitfld.quad 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled" bitfld.quad 0x00 12. "TDCC,Trap accesses to the debug comms channel in EL0" "Disabled,Enabled" bitfld.quad 0x00 6. "ERR,Save/restore bit" "Low,High" bitfld.quad 0x00 0. "SS,Software step control" "Disabled,Enabled" else group.quad spr:0x20022++0x00 line.quad 0x00 "MDSCR_EL1,Monitor Debug System Control Register" rbitfld.quad 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" rbitfld.quad 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" rbitfld.quad 0x00 27. "RXO,Save/restore bit" "Low,High" rbitfld.quad 0x00 26. "TXU,Save/restore bit" "Low,High" newline rbitfld.quad 0x00 22.--23. "INTDIS,Save/restore bits" "0,1,2,3" rbitfld.quad 0x00 21. "TDA,Save/restore bit" "Low,High" bitfld.quad 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled" bitfld.quad 0x00 14. "HDE,Save/restore bit" "Low,High" newline bitfld.quad 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled" bitfld.quad 0x00 12. "TDCC,Trap accesses to the debug comms channel in EL0" "Disabled,Enabled" rbitfld.quad 0x00 6. "ERR,Save/restore bit" "Low,High" bitfld.quad 0x00 0. "SS,Software step control" "Disabled,Enabled" endif group.quad spr:0x20032++0x00 line.quad 0x00 "OSDTRTX_EL1,OS Lock Data Transfer Register" group.quad spr:0x20062++0x00 line.quad 0x00 "OSECCR_EL1,OS Lock Exception Catch Control Register" rgroup.quad spr:0x20100++0x00 line.quad 0x00 "MDRAR_EL1,Debug ROM Address Register" hexmask.quad 0x00 12.--47. 0x10 "ROMADDR,ROM base physical address" bitfld.quad 0x00 0.--1. "VALID,ROM address valid" "Invalid,Reserved,Reserved,Valid" wgroup.quad spr:0x20104++0x00 line.quad 0x00 "OSLAR_EL1,OS Lock Access Register" bitfld.quad 0x00 0. "OSLK,OS lock" "Unlock,Lock" rgroup.quad spr:0x20114++0x00 line.quad 0x00 "OSLSR_EL1,OS Lock Status Register" bitfld.quad 0x00 2. "NTT,Not 32-bit access" "Low,?..." bitfld.quad 0x00 1. "OSLK,OS lock status" "Not locked,Locked" bitfld.quad 0x00 0. 3. "OSLM,OS lock model implemented field" "Reserved,Reserved,Impelemented,?..." group.quad spr:0x20134++0x00 line.quad 0x00 "OSDLR_EL1,OS Double-lock Register" bitfld.quad 0x00 0. "DLK,OS double-lock control" "Not locked,Locked" group.quad spr:0x20144++0x00 line.quad 0x00 "DBGPRCR_EL1,Debug Power/Reset Control Register" bitfld.quad 0x00 0. "CORENPDRQ,Core no powerdown request" "No,Yes" group.quad spr:0x20786++0x00 line.quad 0x00 "DBGCLAIMSET_EL1,Claim Tag register Set" bitfld.quad 0x00 7. "CT7,Claim Tag 7 Set" "Reserved,Set" bitfld.quad 0x00 6. "CT6,Claim Tag 6 Set" "Reserved,Set" bitfld.quad 0x00 5. "CT5,Claim Tag 5 Set" "Reserved,Set" bitfld.quad 0x00 4. "CT4,Claim Tag 4 Set" "Reserved,Set" newline bitfld.quad 0x00 3. "CT3,Claim Tag 3 Set" "Reserved,Set" bitfld.quad 0x00 2. "CT2,Claim Tag 2 Set" "Reserved,Set" bitfld.quad 0x00 1. "CT1,Claim Tag 1 Set" "Reserved,Set" bitfld.quad 0x00 0. "CT0,Claim Tag 0 Set" "Reserved,Set" group.quad spr:0x20796++0x00 line.quad 0x00 "DBGCLAIMCLR_EL1,Claim Tag register Clear" bitfld.quad 0x00 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared" bitfld.quad 0x00 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared" bitfld.quad 0x00 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared" bitfld.quad 0x00 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared" newline bitfld.quad 0x00 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared" bitfld.quad 0x00 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared" bitfld.quad 0x00 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared" bitfld.quad 0x00 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared" rgroup.quad spr:0x207E6++0x00 line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status Register" bitfld.quad 0x00 6.--7. "SNID,Secure non-invasive debug" "Not implemented,Reserved,Disabled,Enabled" bitfld.quad 0x00 4.--5. "SID,Secure invasive debug" "Not implemented,Reserved,Disabled,Enabled" bitfld.quad 0x00 2.--3. "NSNID,Non-secure non-invasive debug" "Not implemented,Reserved,Reserved,Enabled" bitfld.quad 0x00 0.--1. "NSID,Non-secure invasive debug" "Not implemented,Reserved,Disabled,Enabled" tree.end tree "Breakpoint Registers" tree "Breakpoint 0" if (((per.q(spr:0x20005+0x0))&0xF00000)<=0x100000) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x04 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x0))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x0))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x700000))) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0xC00000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0xD00000)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" elif ((((per.q(spr:0x20005+0x0))&0xF00000)>=0xE00000)&&(((per.q(spr:0x20005+0x0))&0xF00000)<=0xF00000)) group.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison against CONTEXTIDR_EL1" else rgroup.quad spr:(0x20004+0x0)++0x00 line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register" endif if (((per.q(spr:0x20005+0x0))&0x2000)==0x2000) if (((per.q(spr:0x20005+0x0))&0xC000)==0x0000) group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x0))&0xC000)==0x4000) group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x0))&0xC000)==0x8000) group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20005+0x0))&0xC000)==0xC000) group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x0)++0x00 line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,User,User/System" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif endif tree.end tree "Breakpoint 1" if (((per.q(spr:0x20005+0x10))&0xF00000)<=0x100000) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x04 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x10))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x10))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x700000))) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0xC00000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0xD00000)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" elif ((((per.q(spr:0x20005+0x10))&0xF00000)>=0xE00000)&&(((per.q(spr:0x20005+0x10))&0xF00000)<=0xF00000)) group.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison against CONTEXTIDR_EL1" else rgroup.quad spr:(0x20004+0x10)++0x00 line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register" endif if (((per.q(spr:0x20005+0x10))&0x2000)==0x2000) if (((per.q(spr:0x20005+0x10))&0xC000)==0x0000) group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x10))&0xC000)==0x4000) group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x10))&0xC000)==0x8000) group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20005+0x10))&0xC000)==0xC000) group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x10)++0x00 line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,User,User/System" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif endif tree.end tree "Breakpoint 2" if (((per.q(spr:0x20005+0x20))&0xF00000)<=0x100000) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x04 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x20))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x20))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x700000))) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0xC00000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0xD00000)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" elif ((((per.q(spr:0x20005+0x20))&0xF00000)>=0xE00000)&&(((per.q(spr:0x20005+0x20))&0xF00000)<=0xF00000)) group.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison against CONTEXTIDR_EL1" else rgroup.quad spr:(0x20004+0x20)++0x00 line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register" endif if (((per.q(spr:0x20005+0x20))&0x2000)==0x2000) if (((per.q(spr:0x20005+0x20))&0xC000)==0x0000) group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x20))&0xC000)==0x4000) group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x20))&0xC000)==0x8000) group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20005+0x20))&0xC000)==0xC000) group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x20)++0x00 line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,User,User/System" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif endif tree.end tree "Breakpoint 3" if (((per.q(spr:0x20005+0x30))&0xF00000)<=0x100000) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x04 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x30))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x30))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x700000))) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0xC00000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0xD00000)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" elif ((((per.q(spr:0x20005+0x30))&0xF00000)>=0xE00000)&&(((per.q(spr:0x20005+0x30))&0xF00000)<=0xF00000)) group.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison against CONTEXTIDR_EL1" else rgroup.quad spr:(0x20004+0x30)++0x00 line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register" endif if (((per.q(spr:0x20005+0x30))&0x2000)==0x2000) if (((per.q(spr:0x20005+0x30))&0xC000)==0x0000) group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x30))&0xC000)==0x4000) group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x30))&0xC000)==0x8000) group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20005+0x30))&0xC000)==0xC000) group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x30)++0x00 line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,User,User/System" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif endif tree.end tree "Breakpoint 4" if (((per.q(spr:0x20005+0x40))&0xF00000)<=0x100000) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x04 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x40))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x40))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x700000))) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0xC00000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0xD00000)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" elif ((((per.q(spr:0x20005+0x40))&0xF00000)>=0xE00000)&&(((per.q(spr:0x20005+0x40))&0xF00000)<=0xF00000)) group.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison against CONTEXTIDR_EL1" else rgroup.quad spr:(0x20004+0x40)++0x00 line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register" endif if (((per.q(spr:0x20005+0x40))&0x2000)==0x2000) if (((per.q(spr:0x20005+0x40))&0xC000)==0x0000) group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x40))&0xC000)==0x4000) group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x40))&0xC000)==0x8000) group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20005+0x40))&0xC000)==0xC000) group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x40)++0x00 line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,User,User/System" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif endif tree.end tree "Breakpoint 5" if (((per.q(spr:0x20005+0x50))&0xF00000)<=0x100000) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad 0x00 2.--48. 0x04 "VA,Bits[48:2] of the address value for comparison" elif (((((per.q(spr:0x20005+0x50))&0xF00000)>=0x200000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x300000))||((((per.q(spr:0x20005+0x50))&0xF00000)>=0x600000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x700000))) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0x800000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0x900000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x00)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0xA00000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0xB00000)&&(((per.q(spr:0x34212))&0x80000)==0x80000)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.word 0x00 32.--47. 1. "VMID,VMID value for comparison" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0xC00000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0xD00000)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" elif ((((per.q(spr:0x20005+0x50))&0xF00000)>=0xE00000)&&(((per.q(spr:0x20005+0x50))&0xF00000)<=0xF00000)) group.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" hexmask.quad.long 0x00 32.--63. 1. "CONTEXTID2,Context ID value for comparison against CONTEXTIDR_EL2" hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID value for comparison against CONTEXTIDR_EL1" else rgroup.quad spr:(0x20004+0x50)++0x00 line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register" endif if (((per.q(spr:0x20005+0x50))&0x2000)==0x2000) if (((per.q(spr:0x20005+0x50))&0xC000)==0x0000) group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x50))&0xC000)==0x4000) group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" elif (((per.q(spr:0x20005+0x50))&0xC000)==0x8000) group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Both" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20005+0x50))&0xC000)==0xC000) group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" else group.quad spr:(0x20005+0x50)++0x00 line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register" bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" newline bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" bitfld.quad 0x00 5.--8. "BAS,Byte address select" "Reserved,Reserved,Reserved,DBGBVRn_EL1,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,DBGBVRn_EL1+2,Reserved,Reserved,DBGBVRn_EL1" bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "Reserved,System,User,User/System" newline bitfld.quad 0x00 0. "E,Breakpoint enable" "Disabled,Enabled" endif endif tree.end tree.end tree "Watchpoint Control Registers" tree "Watchpoint 0" group.quad spr:(0x20006+0x0)++0x00 line.quad 0x00 "DBGWVR0_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x04 "ADDRESS,Data address" if (((per.q(spr:0x20007+0x0))&0x2000)==0x0000) if (((per.q(spr:0x20007+0x0))&0xC000)==0xC000) group.quad spr:(0x20007+0x0)++0x00 line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x0)++0x00 line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20007+0x0))&0xC000)==0x0000) group.quad spr:(0x20007+0x0)++0x00 line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" elif (((per.q(spr:0x20007+0x0))&0xC000)==0x8000) group.quad spr:(0x20007+0x0)++0x00 line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x0)++0x00 line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Superisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif endif tree.end tree "Watchpoint 1" group.quad spr:(0x20006+0x10)++0x00 line.quad 0x00 "DBGWVR1_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x04 "ADDRESS,Data address" if (((per.q(spr:0x20007+0x10))&0x2000)==0x0000) if (((per.q(spr:0x20007+0x10))&0xC000)==0xC000) group.quad spr:(0x20007+0x10)++0x00 line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x10)++0x00 line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20007+0x10))&0xC000)==0x0000) group.quad spr:(0x20007+0x10)++0x00 line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" elif (((per.q(spr:0x20007+0x10))&0xC000)==0x8000) group.quad spr:(0x20007+0x10)++0x00 line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x10)++0x00 line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Superisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif endif tree.end tree "Watchpoint 2" group.quad spr:(0x20006+0x20)++0x00 line.quad 0x00 "DBGWVR2_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x04 "ADDRESS,Data address" if (((per.q(spr:0x20007+0x20))&0x2000)==0x0000) if (((per.q(spr:0x20007+0x20))&0xC000)==0xC000) group.quad spr:(0x20007+0x20)++0x00 line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x20)++0x00 line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20007+0x20))&0xC000)==0x0000) group.quad spr:(0x20007+0x20)++0x00 line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" elif (((per.q(spr:0x20007+0x20))&0xC000)==0x8000) group.quad spr:(0x20007+0x20)++0x00 line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x20)++0x00 line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Superisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif endif tree.end tree "Watchpoint 3" group.quad spr:(0x20006+0x30)++0x00 line.quad 0x00 "DBGWVR3_EL1,Watchpoint Value Register (AArch64)" hexmask.quad 0x00 2.--48. 0x04 "ADDRESS,Data address" if (((per.q(spr:0x20007+0x30))&0x2000)==0x0000) if (((per.q(spr:0x20007+0x30))&0xC000)==0xC000) group.quad spr:(0x20007+0x30)++0x00 line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Supervisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x30)++0x00 line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System,User,User/System" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif else if (((per.q(spr:0x20007+0x30))&0xC000)==0x0000) group.quad spr:(0x20007+0x30)++0x00 line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Reserved,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" elif (((per.q(spr:0x20007+0x30))&0xC000)==0x8000) group.quad spr:(0x20007+0x30)++0x00 line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Secure" bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "TrustZone,System/Supervisor/TrustZone,Reserved,User/System/Supervisor/TrustZone" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" else group.quad spr:(0x20007+0x30)++0x00 line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register" bitfld.quad 0x00 24.--28. "MASK,Address mask" "No mask,Reserved,Reserved,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked" bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled" hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select" newline bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both" bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "Superisor,System/Supervisor,Reserved,User/System/Supervisor" bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled" endif endif tree.end tree.end tree.end tree.open "AArch32" tree "ID Registers" rgroup.long c15:0x0000++0x0 line.long 0x0 "MIDR,Main ID Register" hexmask.long.byte 0x0 24.--31. 0x1 "IMPL,Implementer code" bitfld.long 0x0 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 16.--19. "ARCH,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8" newline hexmask.long.word 0x0 4.--15. 0x10 "PART,Primary Part Number" bitfld.long 0x0 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long c15:0x0100++0x0 line.long 0x0 "CTR,Cache Type Register" bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..." bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." rgroup.long c15:0x0200++0x0 line.long 0x0 "TCMTR,TCM Type Register" rgroup.long c15:0x0300++0x0 line.long 0x0 "TLBTR,TLB Type Register" rgroup.long c15:0x0500++0x0 line.long 0x0 "MPIDR,Multiprocessor Affinity Register" bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..." hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field" newline hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field" hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Lowest level affinity field" rgroup.long c15:0x0600++0x0 line.long 0x0 "REVIDR,Revision ID Register" rgroup.long c15:0x0410++0x00 line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,Implemented,?..." bitfld.long 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..." bitfld.long 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..." bitfld.long 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..." bitfld.long 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,Implemented,?..." newline bitfld.long 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..." bitfld.long 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,VMSAv7,?..." rgroup.long c15:0x0510++0x00 line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1" bitfld.long 0x00 28.--31. "BTB,Branch Predictor" "Reserved,Reserved,Reserved,Reserved,No flushing,?..." bitfld.long 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." newline bitfld.long 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." newline bitfld.long 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup.long c15:0x0610++0x00 line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..." bitfld.long 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..." newline bitfld.long 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." rgroup.long c15:0x0710++0x00 line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3" bitfld.long 0x00 28.--31. "SS,Supersection support" "Supported,?..." bitfld.long 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..." bitfld.long 0x00 20.--23. "CW,Coherent walk" "Reserved,Supported,?..." newline bitfld.long 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 4.--7. "HCMOSW,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..." newline bitfld.long 0x00 0.--3. "HCMOMVA,Invalidate Cache MVA Support" "Reserved,Supported,?..." rgroup.long c15:0x0020++0x00 line.long 0x00 "ID_ISAR0,Instruction Set Attribute Register 0" bitfld.long 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..." newline bitfld.long 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..." rgroup.long c15:0x0120++0x00 line.long 0x00 "ID_ISAR1,Instruction Set Attribute Register 1" bitfld.long 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0220++0x00 line.long 0x00 "ID_ISAR2,Instruction Set Attribute Register 2" bitfld.long 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 24.--27. "PSRI,PSR Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..." newline bitfld.long 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.long c15:0x0320++0x00 line.long 0x00 "ID_ISAR3,Instruction Set Attribute Register 3" bitfld.long 0x00 28.--31. "TEEEI,Thumb-EE Extensions Support" "Not supported,?..." bitfld.long 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0420++0x00 line.long 0x00 "ID_ISAR4,Instruction Set Attribute Register 4" bitfld.long 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..." bitfld.long 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..." bitfld.long 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..." newline bitfld.long 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.long c15:0x0520++0x00 line.long 0x00 "ID_ISAR5,Instruction Set Attribute Register 5" bitfld.long 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..." newline bitfld.long 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "SEVL,SEVL Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0010++0x00 line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..." bitfld.long 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..." newline bitfld.long 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..." rgroup.long c15:0x0110++0x00 line.long 0x00 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..." bitfld.long 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..." newline bitfld.long 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..." bitfld.long 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." rgroup.long c15:0x0210++0x00 line.long 0x00 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..." bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Not implemented,Supported,?..." newline bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..." bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..." rgroup.long c15:0x0310++0x00 line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" tree.end tree "System Control and Configuration" group.long c15:0x0001++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32" bitfld.long 0x0 29. "AFE,Access Flag Enable" "Disabled,Enabled" newline bitfld.long 0x0 28. "TRE,TEX remap enable" "Disabled,Enabled" bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced" bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes" bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes" newline bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000" bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes" bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes" newline bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled" bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.quad c15:0x100F0++0x01 line.quad 0x00 "CPUACTLR,CPU Auxiliary Control Register" bitfld.quad 0x00 44. "ENDCCASCI,Enable Data Cache Clean As data cache Clean/Invalidate" "Disabled,Enabled" bitfld.quad 0x00 30. "CDIDIS,Disable Cryptographic Dual Issue" "No,Yes" newline bitfld.quad 0x00 29. "DIDIS,Disable Dual Issue" "No,Yes" bitfld.quad 0x00 27.--28. "RADIS,Write streaming no-allocate threshold" "16th,128th,512th,Disabled" newline bitfld.quad 0x00 25.--26. "L1RADIS,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled" bitfld.quad 0x00 24. "DTAH,Disable Transient allocation hint" "No,Yes" newline bitfld.quad 0x00 23. "STBPFRS,Disable ReadUnique request for prefetch streams initiated by STB accesses" "No,Yes" bitfld.quad 0x00 22. "STBPFDIS,Disable prefetch streams initiated from STB accesses" "No,Yes" newline bitfld.quad 0x00 19.--20. "NPFSTRM,Number of independent data prefetch streams" "1 stream,2 streams,3 streams,4 streams" bitfld.quad 0x00 18. "DSTDIS,Enable device split throttle" "Disabled,Enabled" newline bitfld.quad 0x00 17. "STRIDE,Enable stride detection" "2 linefills,3 linefills" bitfld.quad 0x00 13.--15. "L1PCTL,L1 Data prefetch control" "Disabled,1,2,3,4,5,6,8" newline bitfld.quad 0x00 11. "DYNSDIS,Disable dynamic stride adjustment for prefetch streams" "No,Yes" bitfld.quad 0x00 10. "DODMBS,Disable optimized Data Memory Barrier behavior" "No,Yes" newline bitfld.quad 0x00 6. "L1DEIEN,L1 D-cache Data RAM Error Injection Enable" "Disabled,Enabled" group.quad c15:0x110F0++0x01 line.quad 0x00 "CPUECTLR,CPU Extended Control Register" bitfld.quad 0x00 6. "SMPEN,Enable hardware management of data coherency with other processors in the multiprocessor" "Disabled,Enabled" bitfld.quad 0x00 3.--5. "FPRETCTL,Advanced SIMD and Floating-point retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks" newline bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks" if (((per.q(c15:0x120F0))&0x7F000000)==0x000000000) group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Way 0,Way 1,?..." newline hexmask.quad.word 0x00 0.--11. 1. "RAD,RAM address" elif (((per.q(c15:0x120F0))&0x7F000000)==0x01000000) group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Bank 0,Bank 1,?..." newline hexmask.quad.word 0x00 0.--11. 1. "RAD,RAM address" elif (((per.q(c15:0x120F0))&0x7F000000)==0x08000000) group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Way 0,Way 1,Way 2,Way 3,?..." newline hexmask.quad.word 0x00 0.--11. 1. "RAD,RAM address" elif (((per.q(c15:0x120F0))&0x7F000000)==0x09000000) group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Bank 0,Bank 1,Bank 2,Bank 3,Bank 4,Bank 5,Bank 6,Bank 7" newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(c15:0x120F0))&0x7F000000)==0x0A000000) group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Dirty RAM,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" elif (((per.q(c15:0x120F0))&0x7F000000)==0x18000000) group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--20. "C/W,CPUID/Way" "Way 0,Way 1,?..." newline hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" else group.quad c15:0x120F0++0x01 line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" hexmask.quad.word 0x00 0.--11. 0x01 "RAD,RAM address" endif group.long c15:0x0101++0x0 line.long 0x0 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled" bitfld.long 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled" newline bitfld.long 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled" bitfld.long 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled" newline bitfld.long 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled" group.long c15:0x0201++0x00 line.long 0x0 "CPACR,Coprocessor Access Control Register" bitfld.long 0x0 31. "ASEDIS,Disable Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x0 22.--23. "CP11,Coprocesor access control" "Denied,EL1 only,Reserved,Full" newline bitfld.long 0x0 20.--21. "CP10,Coprocesor access control" "Denied,EL1 only,Reserved,Full" group.long c15:0x0011++0x0 line.long 0x0 "SCR,Secure Configuration Register" bitfld.long 0x00 13. "TWE,Trap WFE Instructions" "Not trapped,Trapped" bitfld.long 0x00 12. "TWI,Trap WFI Instructions" "Not trapped,Trapped" newline bitfld.long 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted" bitfld.long 0x00 8. "HCE,Hypervisor Call enable" "No,Yes" newline bitfld.long 0x00 7. "SCD,Secure Monitor Call disable" "No,Yes" bitfld.long 0x00 5. "AW,Controls whether the Non-secure world can modify the A-bit in the CPSR" "Not allowed,Allowed" newline bitfld.long 0x00 4. "FW,Controls whether the Non-secure world can modify the F-bit in the CPSR" "Not allowed,Allowed" bitfld.long 0x00 3. "EA,External Abort exceptions handled in Abort mode or Monitor mode" "Not taken,Taken" newline bitfld.long 0x00 2. "FIQ,FIQ exceptions handled in FIQ mode or Monitor mode" "Not taken,Taken" bitfld.long 0x00 1. "IRQ,IRQ exceptions handled in IRQ mode or Monitor mode" "Not taken,Taken" newline bitfld.long 0x00 0. "NS,Secure mode" "Secure,Non-secure" group.long c15:0x0111++0x00 line.long 0x00 "SDER,Secure Debug Enable Register" bitfld.long 0x00 1. "SUNIDEN,Non-Invasive Secure User Debug Enable bit" "Denied,Permitted" bitfld.long 0x00 0. "SUIDEN,Invasive Secure User Debug Enable bit" "Denied,Permitted" group.long c15:0x0131++0x00 line.long 0x00 "SDCR,Secure Debug Control Register" bitfld.long 0x00 21. "EPMAD,External debugger access to Performance Monitors registers disabled" "No,Yes" bitfld.long 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint registers disabled" "No,Yes" newline bitfld.long 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled" bitfld.long 0x00 14.--15. "SPD,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled" group.long c15:0x0211++0x00 line.long 0x00 "NSACR,Non-Secure Access Control Register" bitfld.long 0x00 15. "NSASEDIS,Disable Non-secure Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x00 11. "CP11,Coprocessor 11 in the Non-secure World Access Permission" "Denied,Permitted" newline bitfld.long 0x00 10. "CP10,Coprocessor 10 in the Non-secure World Access Permission" "Denied,Permitted" group.long c15:0x000C++0x00 line.long 0x00 "VBAR,Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address" group.long c15:0x010C++0x00 line.long 0x00 "MVBAR,Monitor Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address" rgroup.long c15:0x001C++0x00 line.long 0x00 "ISR,Interrupt Status Register" bitfld.long 0x00 8. "A,External abort pending flag" "Not pending,Pending" bitfld.long 0x00 7. "I,Interrupt pending flag" "Not pending,Pending" newline bitfld.long 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending" group.long c15:0x020C++0x00 line.long 0x00 "RMR,Reset Management Register" bitfld.long 0x00 1. "RR,Reset Request" "Not requested,Requested" bitfld.long 0x00 0. "AA64,Determines which execution state the processor boots into after a warm reset" "AArch32,AArch64" rgroup.long c15:0x0015++0x00 line.long 0x00 "ADFSR,Auxiliary Data Fault Status Register" rgroup.long c15:0x0115++0x00 line.long 0x00 "AIFSR,Auxiliary Instruction Fault Status Register" if (((per.l(c15:0x202))&0x80000000)==0x80000000) group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted" bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR" newline bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write" bitfld.long 0x00 0.--5. "STATUS,Fault Status" "Address size/TTBR0/TTBR1,Reserved,Reserved,Reserved,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Async. external,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/on memory access,Async. parity/on memory access,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/L1,Sync. parity/on memory access/on TTW/L2,Sync. parity/on memory access/on TTW/L3,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Reserved,LDREX or STREX,?..." group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR" bitfld.long 0x00 0.--5. "STATUS,Fault Status" "Reserved,Reserved,Reserved,Reserved,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/on memory access,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/L1,Sync. parity/on memory access/on TTW/L2,Sync. parity/on memory access/on TTW/L3,Reserved,Alignment,Debug event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." else group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted" bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR" newline bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write" bitfld.long 0x00 4.--7. "DOMAIN,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15" newline bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Alignment,Debug event,Access flag/section,Instruction cache maintenance,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/L1,Permission/section,Sync. external/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Reserved,LDREX or STREX,Async. external,Reserved,Async. parity,Sync. parity,Reserved,Reserved,Sync. parity/L1,Reserved,Sync. parity/L2,?..." group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR" bitfld.long 0x00 0.--3. 10. "FS,Fault Status" "Reserved,Reserved,Debug event,Access flag/section,Reserved,Translation/section,Access flag/page,Translation/page,Sync. external/non-translation,Domain/section,Reserved,Domain/page,Sync. external/on TTW/L1,Permission/section,Sync. external/on TTW/L2,Permission/page,TLB conflict,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/L1,Reserved,Sync. parity/on TTW/L2,?..." endif group.long c15:0x0006++0x00 line.long 0x00 "DFAR,Data Fault Address Register" group.long c15:0x0206++0x00 line.long 0x00 "IFAR,Instruction Fault Address Register" rgroup.long c15:0x103F++0x00 line.long 0x00 "CBAR,Configuration Base Address Register" hexmask.long.word 0x00 18.--31. 0x04 "PERIPHBASE[31:18],Periphbase[31:18]" hexmask.long.byte 0x00 0.--7. 0x01 "PERIPHBASE[39:32],Periphbase[39:32]" rgroup.long c15:0x000D++0x00 line.long 0x00 "FCSEIDR,FCSE Process ID register" group.long c15:0x020D++0x00 line.long 0x00 "TPIDRURW,User Read/Write Thread ID Register" rgroup.long c15:0x030D++0x00 line.long 0x00 "TPIDRURO,User Read-Only Thread ID Register" group.long c15:0x040D++0x00 line.long 0x00 "TPIDRPRW,EL1 only Thread ID Register" tree "System Instructions" wgroup.long c15:0x0017++0x00 line.long 0x00 "ICIALLUIS,ICIALLUIS" wgroup.long c15:0x0617++0x00 line.long 0x00 "BPIALLIS,BPIALLIS" wgroup.long c15:0x0057++0x00 line.long 0x00 "ICIALLU,ICIALLU" wgroup.long c15:0x0157++0x00 line.long 0x00 "ICIMVAU,ICIMVAU" wgroup.long c15:0x0457++0x00 line.long 0x00 "CP15ISB,CP15ISB" wgroup.long c15:0x0657++0x00 line.long 0x00 "BPIALL,BPIALL" wgroup.long c15:0x0757++0x00 line.long 0x00 "BPIMVA,BPIMVA" wgroup.long c15:0x0167++0x00 line.long 0x00 "DCIMVAC,DCIMVAC" wgroup.long c15:0x0267++0x00 line.long 0x00 "DCISW,DCISW" wgroup.long c15:0x0087++0x00 line.long 0x00 "ATS1CPR,ATS1CPR" wgroup.long c15:0x0187++0x00 line.long 0x00 "ATS1CPW,ATS1CPW" wgroup.long c15:0x0287++0x00 line.long 0x00 "ATS1CUR,ATS1CUR" wgroup.long c15:0x0387++0x00 line.long 0x00 "ATS1CUW,ATS1CUW" wgroup.long c15:0x0487++0x00 line.long 0x00 "ATS12NSOPR,ATS12NSOPR" wgroup.long c15:0x0587++0x00 line.long 0x00 "ATS12NSOPW,ATS12NSOPW" wgroup.long c15:0x0687++0x00 line.long 0x00 "ATS12NSOUR,ATS12NSOUR" wgroup.long c15:0x0787++0x00 line.long 0x00 "ATS12NSOUW,ATS12NSOUW" wgroup.long c15:0x01A7++0x00 line.long 0x00 "DCCMVAC,DCCMVAC" wgroup.long c15:0x02A7++0x00 line.long 0x00 "DCCSW,DCCSW" wgroup.long c15:0x04A7++0x00 line.long 0x00 "CP15DSB,CP15DSB" wgroup.long c15:0x05A7++0x00 line.long 0x00 "CP15DMB,CP15DMB" wgroup.long c15:0x01B7++0x00 line.long 0x00 "DCCMVAU,DCCMVAU" wgroup.long c15:0x01E7++0x00 line.long 0x00 "DCCIMVAC,DCCIMVAC" wgroup.long c15:0x02E7++0x00 line.long 0x00 "DCCISW,DCCISW" wgroup.long c15:0x4087++0x00 line.long 0x00 "ATS1HR,ATS1HR" wgroup.long c15:0x4187++0x00 line.long 0x00 "ATS1HW,ATS1HW" wgroup.long c15:0x0038++0x00 line.long 0x00 "TLBIALLIS,TLBIALLIS" wgroup.long c15:0x0138++0x00 line.long 0x00 "TLBIMVAIS,TLBIMVAIS" wgroup.long c15:0x0238++0x00 line.long 0x00 "TLBIASIDIS,TLBIASIDIS" wgroup.long c15:0x0338++0x00 line.long 0x00 "TLBIMVAAIS,TLBIMVAAIS" wgroup.long c15:0x0538++0x00 line.long 0x00 "TLBIMVALIS,TLBIMVALIS" wgroup.long c15:0x0738++0x00 line.long 0x00 "TLBIMVAALIS,TLBIMVAALIS" wgroup.long c15:0x0058++0x00 line.long 0x00 "ITLBIALL,ITLBIALL" wgroup.long c15:0x0158++0x00 line.long 0x00 "ITLBIMVA,ITLBIMVA" wgroup.long c15:0x0258++0x00 line.long 0x00 "ITLBIASID,ITLBIASID" wgroup.long c15:0x0068++0x00 line.long 0x00 "DTLBIALL,DTLBIALL" wgroup.long c15:0x0168++0x00 line.long 0x00 "DTLBIMVA,DTLBIMVA" wgroup.long c15:0x0268++0x00 line.long 0x00 "DTLBIASID,DTLBIASID" wgroup.long c15:0x0078++0x00 line.long 0x00 "TLBIALL,TLBIALL" wgroup.long c15:0x0178++0x00 line.long 0x00 "TLBIMVA,TLBIMVA" wgroup.long c15:0x0278++0x00 line.long 0x00 "TLBIASID,TLBIASID" wgroup.long c15:0x0378++0x00 line.long 0x00 "TLBIMVAA,TLBIMVAA" wgroup.long c15:0x0578++0x00 line.long 0x00 "TLBIMVAL,TLBIMVAL" wgroup.long c15:0x0778++0x00 line.long 0x00 "TLBIMVAAL,TLBIMVAAL" wgroup.long c15:0x4108++0x00 line.long 0x00 "TLBIIPAS2IS,TLBIIPAS2IS" wgroup.long c15:0x4508++0x00 line.long 0x00 "TLBIIPAS2LIS,TLBIIPAS2LIS" wgroup.long c15:0x4038++0x00 line.long 0x00 "TLBIALLHIS,TLBIALLHIS" wgroup.long c15:0x4138++0x00 line.long 0x00 "TLBIMVAHIS,TLBIMVAHIS" wgroup.long c15:0x4438++0x00 line.long 0x00 "TLBIALLNSNHIS,TLBIALLNSNHIS" wgroup.long c15:0x4538++0x00 line.long 0x00 "TLBIMVALHIS,TLBIMVALHIS" wgroup.long c15:0x4148++0x00 line.long 0x00 "TLBIIPAS2,TLBIIPAS2" wgroup.long c15:0x4548++0x00 line.long 0x00 "TLBIIPAS2L,TLBIIPAS2L" wgroup.long c15:0x4078++0x00 line.long 0x00 "TLBIALLH,TLBIALLH" wgroup.long c15:0x4178++0x00 line.long 0x00 "TLBIMVAH,TLBIMVAH" wgroup.long c15:0x4478++0x00 line.long 0x00 "TLBIALLNSNH,TLBIALLNSNH" wgroup.long c15:0x4578++0x00 line.long 0x00 "TLBIMVALH,TLBIMVALH" tree.end tree.end tree "Memory Management Unit" group.long c15:0x0001++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x0 30. "TE,T32 exception enable" "A32,T32" bitfld.long 0x0 29. "AFE,Access Flag Enable" "Disabled,Enabled" newline bitfld.long 0x0 28. "TRE,TEX remap enable" "Disabled,Enabled" bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x0 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced" bitfld.long 0x0 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced" newline bitfld.long 0x0 18. "NTWE,Not trap WFE" "No,Yes" bitfld.long 0x0 16. "NTWI,Not trap WFI" "No,Yes" newline bitfld.long 0x0 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000" bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes" bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes" newline bitfld.long 0x0 5. "CP15BEN,c15 barrier enable" "Disabled,Enabled" bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x0 0. "M,MMU or Protection Unit" "Disabled,Enabled" group.long c15:0x4001++0x0 line.long 0x00 "HSCTLR,System Control Register" bitfld.long 0x0 30. "TE,Thumb exception enable" "ARM,Thumb" bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x0 19. "WXN,Write permission implies XN" "Not forced,Forced" bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes" bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes" newline bitfld.long 0x0 5. "CP15BEN,C15 barrier enable" "Disabled,Enabled" bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x0 0. "M,MMU enable" "Disabled,Enabled" if (((per.l(c15:0x202))&0x80000000)==0x80000000) group.quad c15:0x10020++0x01 line.quad 0x00 "TTBR0,Translation Table Base Register 0" hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address" newline newline group.quad c15:0x11020++0x01 line.quad 0x00 "TTBR1,Translation Table Base Register 1" hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base address" hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address" newline newline group.long c15:0x0202++0x00 line.long 0x00 "TTBCR,Translation Table Base Control Register" bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit" bitfld.long 0x00 28.--29. "SH1,Shareability attributes for the memory associated with the translation table walks using TTBR1" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.long 0x00 26.--27. "ORGN1,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 24.--25. "IRGN1,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 23. "EPD1,Translation Walk Disable for TTBR1" "No,Yes" bitfld.long 0x00 22. "A1,Selects TTBR0 or TTBR1 to defines the ASID" "TTBR0,TTBR1" newline bitfld.long 0x00 16.--18. "T1SZ,The Size offset of the TTBR1 addressed region" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable" newline bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 7. "EPD0,Translation Walk Disable for TTBR0 region" "No,Yes" bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7" else group.long c15:0x0002++0x00 line.long 0x00 "TTBR0,Translation Table Base Register 0" hexmask.long 0x00 7.--31. 0x80 "TTB0,Translation table base 0 address" bitfld.long 0x00 6. 0. "IRGN,Inner region bits" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 5. "NOS,Not Outer Shareable bit" "Outer,Inner" bitfld.long 0x00 3.--4. "RGN,RGN" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 1. "S,Shareable bit" "Non-shareable,Shareable" group.long c15:0x0102++0x00 line.long 0x00 "TTBR1,Translation Table Base Register 1" hexmask.long 0x00 7.--31. 0x80 "TTB1,Translation table base 1 address" bitfld.long 0x00 6. 0. "IRGN,Inner region bits" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 5. "NOS,Not Outer Shareable bit" "Outer,Inner" bitfld.long 0x00 3.--4. "RGN,RGN" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 1. "S,Shareable bit" "Non-shareable,Shareable" group.long c15:0x0202++0x00 line.long 0x00 "TTBCR,Translation Table Base Control Register" bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit" bitfld.long 0x00 5. "PD1,Translation table walk disable for translations using TTBR1" "No,Yes" newline bitfld.long 0x00 4. "PD0,Translation table walk disable for translations using TTBR0" "No,Yes" bitfld.long 0x00 0.--2. "N,Width of the base address held in TTBR0" "0,1,2,3,4,5,6,7" newline newline newline newline endif group.quad c15:0x14020++0x01 line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register" hexmask.quad 0x00 1.--47. 0x02 "BADDR,Translation table base address" group.long c15:0x4202++0x00 line.long 0x00 "HTCR,Hypervisor Translation Control Register" bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7" group.long c15:0x0003++0x00 line.long 0x00 "DACR,Domain Access Control Register" bitfld.long 0x0 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager" bitfld.long 0x0 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager" bitfld.long 0x0 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager" bitfld.long 0x0 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager" bitfld.long 0x0 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager" bitfld.long 0x0 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager" bitfld.long 0x0 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager" bitfld.long 0x0 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager" newline bitfld.long 0x0 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager" bitfld.long 0x0 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager" if ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x01)==0x00)) group.long c15:0x0047++0x00 line.long 0x00 "PAR,Physical Address Register" hexmask.long.tbyte 0x00 12.--31. 0x10 "PA,Physical Address" bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,Long" newline bitfld.long 0x00 10. "NOS,Not Outer Shareable attribute for the region" "No,Yes" bitfld.long 0x00 9. "NS,Non-secure" "No,Yes" newline bitfld.long 0x00 7. "SH,Shareable attribute for the region" "No,Yes" bitfld.long 0x00 4.--6. "INNER,Inner memory attributes for the region" "Non-cacheable,Device-nGnRnE,Reserved,Device-nGnRE,Reserved,Write-Back/Write-Allocate,Write-Through,Write-Back/No Write-Allocate" newline bitfld.long 0x00 2.--3. "OUTER,Outer memory attributes for the region" "Non-cacheable,Write-Back/Write-Allocate,Write-Through/No Write-Allocate,Write-Back/No Write-Allocate" bitfld.long 0x00 1. "SS,Supersection" "Disabled,Enabled" newline bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x01)==0x01)) group.long c15:0x0047++0x00 line.long 0x00 "PAR,Physical Address Register" newline bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,Long" newline bitfld.long 0x00 6. "FS[5],Fault status bit [5] - External abort type" "Internal,External" newline bitfld.long 0x00 1.--5. "FS[4:0],Fault status bit [4:0] - Abort source" "Reserved,Alignment,Debug,Access flag/L1,Instruction,Translation/L1,Access flag/L2,Translation/L2,Sync. external,Domain/L1,Reserved,Domain/L2,Sync. external/on TTW/L1,Permission/L1,Sync. external/on TTW/L2,Permission/L2,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupp. exclusive access,SError,Reserved,Reserved,Sync. parity/ECC on memory access,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Reserved,Sync. parity/ECC on TTW/L2,?..." newline bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" elif ((((per.l(c15:0x0202))&0x80000000)==0x80000000)&&(((per.l(c15:0x10070))&0x01)==0x00)) group.quad c15:0x10070++0x01 line.quad 0x00 "PAR,Physical Address Register" hexmask.quad.byte 0x00 56.--63. 1. "ATTR,Memory attributes for the returned PA" hexmask.quad.long 0x00 12.--39. 0x10 "PA,Physical Address" newline bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" "Short,Long" bitfld.quad 0x00 9. "NS,Non-secure" "No,Yes" newline bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" newline newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" else group.quad c15:0x10070++0x01 line.quad 0x00 "PAR,Physical Address Register" newline bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" "Short,Long" bitfld.quad 0x00 9. "FSTAGE,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2" newline bitfld.quad 0x00 8. "S2WLK,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes" newline bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Address size/TTBR,Address size/L1,Address size/L2,Address size/L3,Reserved,Translation/L1,Translation/L2,Translation/L3,Reserved,Access flag/L1,Access flag/L2,Access flag/L3,Reserved,Permission/L1,Permission/L2,Permission/L3,Sync. external,Reserved,Reserved,Reserved,Reserved,Sync. external/on TTW/L1,Sync. external/on TTW/L2,Sync. external/on TTW/L3,Sync. parity/ECC on memory access,Sync. parity/ECC on memory access,Reserved,Reserved,Reserved,Sync. parity/ECC on TTW/L1,Sync. parity/ECC on TTW/L2,Sync. parity/ECC/on TTW/L3,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..." newline bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted" endif tree.open "Memory Attribute Indirection Registers" if (((per.l(c15:0x202))&0x80000000)==0x80000000) group.long c15:0x002A++0x00 line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x012A++0x00 line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x010D++0x00 line.long 0x0 "CONTEXTIDR,Context ID Register" else group.long c15:0x002A++0x0 line.long 0x00 "PRRR,Primary Region Remap Register" bitfld.long 0x00 31. "NOS7,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 30. "NOS6,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 29. "NOS5,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 28. "NOS4,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 27. "NOS3,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 26. "NOS2,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 25. "NOS1,Outer Shareable property mapping for memory attributes" "Outer,Inner" bitfld.long 0x00 24. "NOS0,Outer Shareable property mapping for memory attributes" "Outer,Inner" newline bitfld.long 0x00 19. "NS1,Shareable Attribute Remap when S=1 for Normal Regions" "Remapped,Not remapped" bitfld.long 0x00 18. "NS0,Shareable Attribute Remap when S=0 for Normal Regions" "Not remapped,Remapped" newline bitfld.long 0x00 17. "DS1,Shareable Attribute Remap when S=1 for Device regions" "Remapped,Not remapped" bitfld.long 0x00 16. "DS0,Shareable Attribute Remap when S=0 for Device regions" "Not remapped,Remapped" newline bitfld.long 0x00 14.--15. "TR7,{TEX[0] C B} = b111 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 12.--13. "TR6,{TEX[0] C B} = b110 Remap" "Strongly ordered,Device,Normal,?..." newline bitfld.long 0x00 10.--11. "TR5,{TEX[0] C B} = b101 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 8.--9. "TR4,{TEX[0] C B} = b100 Remap" "Strongly ordered,Device,Normal,?..." newline bitfld.long 0x00 6.--7. "TR3,{TEX[0] C B} = b011 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 4.--5. "TR2,{TEX[0] C B} = b010 Remap" "Strongly ordered,Device,Normal,?..." newline bitfld.long 0x00 2.--3. "TR1,{TEX[0] C B} = b001 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 0.--1. "TR0,{TEX[0] C B} = b000 Remap" "Strongly ordered,Device,Normal,?..." group.long c15:0x012A++0x0 line.long 0x00 "NMRR,Normal Memory Remap Register" bitfld.long 0x00 30.--31. "OR7,Outer Attribute for {TEX[0] C B} = b111 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 28.--29. "OR6,Outer Attribute for {TEX[0] C B} = b110 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 26.--27. "OR5,Outer Attribute for {TEX[0] C B} = b101 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 24.--25. "OR4,Outer Attribute for {TEX[0] C B} = b100 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 22.--23. "OR3,Outer Attribute for {TEX[0] C B} = b011 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 20.--21. "OR2,Outer Attribute for {TEX[0] C B} = b010 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 18.--19. "OR1,Outer Attribute for {TEX[0] C B} = b001 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 16.--17. "OR0,Outer Attribute for {TEX[0] C B} = b000 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 14.--15. "IR7,Inner attribute for {TEX[0] C B} = b111 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 12.--13. "IR6,Inner attribute for {TEX[0] C B} = b110 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 10.--11. "IR5,Inner attribute for {TEX[0] C B} = b101 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 8.--9. "IR4,Inner attribute for {TEX[0] C B} = b100 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 6.--7. "IR3,Inner attribute for {TEX[0] C B} = b011 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 4.--5. "IR2,Inner attribute for {TEX[0] C B} = b010 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" newline bitfld.long 0x00 2.--3. "IR1,Inner attribute for {TEX[0] C B} = b001 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 0.--1. "IR0,Inner attribute for {TEX[0] C B} = b000 Remap" "Noncacheable,Write-back allocate,Write-through,Write-back no allocate" group.long c15:0x010D++0x00 line.long 0x0 "CONTEXTIDR,Context ID Register" hexmask.long.tbyte 0x00 8.--31. 1. "PROCID,Process identifier" hexmask.long.byte 0x00 0.--7. 1. "ASID,Address space identifier" endif rgroup.long c15:0x003A++0x00 line.long 0x00 "AMAIR0,Auxiliary Memory Attribute Indirection Register 0" rgroup.long c15:0x013A++0x00 line.long 0x00 "AMAIR1,Auxiliary Memory Attribute Indirection Register 1" rgroup.long c15:0x403A++0x00 line.long 0x00 "HAMAIR0,Hypervisor Auxiliary Memory Attribute Indirection Register 0" rgroup.long c15:0x413A++0x00 line.long 0x00 "HAMAIR1,Hypervisor Auxiliary Memory Attribute Indirection Register 1" tree.end tree.end tree "Virtualization Extensions" group.long c15:0x4000++0x0 line.long 0x00 "VPIDR,Virtualization Processor ID Register" hexmask.long.byte 0x0 24.--31. 0x1 "IMPL,Implementer code" bitfld.long 0x0 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x0 16.--19. "ARCH,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8" hexmask.long.word 0x0 4.--15. 0x10 "PART,Primary Part Number" newline bitfld.long 0x0 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long c15:0x4500++0x00 line.long 0x00 "VMPIDR,Virtualization Multiprocessor ID Register" bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largely independent,?..." newline hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field" hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field" newline hexmask.long.byte 0x00 0.--7. 1. "AFF0,Affinity level 0. Lowest level affinity field" group.long c15:0x420D++0x00 line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register" group.long c15:0x4001++0x0 line.long 0x00 "HSCTLR,System Control Register" bitfld.long 0x0 30. "TE,Thumb exception enable" "ARM,Thumb" bitfld.long 0x0 25. "EE,Exception endianness" "Little,Big" newline bitfld.long 0x0 19. "WXN,Write permission implies XN" "Not forced,Forced" bitfld.long 0x0 12. "I,Instruction Cache Enable" "Disabled,Enabled" newline bitfld.long 0x0 8. "SED,SETEND Disable" "No,Yes" bitfld.long 0x0 7. "ITD,IT Disable" "No,Yes" newline bitfld.long 0x0 5. "CP15BEN,C15 barrier enable" "Disabled,Enabled" bitfld.long 0x0 2. "C,Enable unified cache or data cache" "Disabled,Enabled" newline bitfld.long 0x0 1. "A,Strict Alignment" "Disabled,Enabled" bitfld.long 0x0 0. "M,MMU enable" "Disabled,Enabled" group.long c15:0x4101++0x00 line.long 0x00 "HACTLR,Hypervisor Auxiliary Control Register" bitfld.long 0x00 6. "L2ACTLR,L2ACTLR write access control" "Disabled,Enabled" bitfld.long 0x00 5. "L2ECTLR,L2ECTLR write access control" "Disabled,Enabled" newline bitfld.long 0x00 4. "L2CTLR,L2CTLR write access control" "Disabled,Enabled" bitfld.long 0x00 1. "CPUECTLR,CPUECTLR write access control" "Disabled,Enabled" newline bitfld.long 0x00 0. "CPUACTLR,CPUACTLR write access control" "Disabled,Enabled" rgroup.long c15:0x4711++0x00 line.long 0x00 "HACR,Hypervisor Auxiliary Configuration Register" group.long c15:0x4011++0x00 line.long 0x00 "HCR,Hypervisor Configuration Register" bitfld.long 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled" bitfld.long 0x00 29. "HCD,Hypervisor Call Disable" "No,Yes" newline bitfld.long 0x00 27. "TGE,Trap General Exceptions" "Disabled,Enabled" bitfld.long 0x00 26. "TVM,Trap Virtual Memory Controls" "Disabled,Enabled" newline bitfld.long 0x00 25. "TTLB,Trap TLB maintenance instructions" "Disabled,Enabled" bitfld.long 0x00 24. "TPU,Trap Cache maintenance instructions to point of unification" "Disabled,Enabled" newline bitfld.long 0x00 23. "TPC,Trap Data/Unified cache maintenance instructions to point of coherency" "Disabled,Enabled" bitfld.long 0x00 22. "TSW,Trap Data/Unified cache Set/Way instructions" "Disabled,Enabled" newline bitfld.long 0x00 21. "TAC,Trap Auxiliary Control Register Accesses" "Disabled,Enabled" bitfld.long 0x00 20. "TIDCP,Trap Lockdown" "Disabled,Enabled" newline bitfld.long 0x00 19. "TSC,Trap SMC" "Disabled,Enabled" bitfld.long 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled" newline bitfld.long 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled" bitfld.long 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled" newline bitfld.long 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled" bitfld.long 0x00 14. "TWE,Trap WFE" "Disabled,Enabled" newline bitfld.long 0x00 13. "TWI,Trap WFI" "Disabled,Enabled" bitfld.long 0x00 12. "DC,Default Cacheable" "Disabled,Enabled" newline bitfld.long 0x00 10.--11. "BSU,Barrier Shareability Upgrade" "No effect,Inner Shareable,Outer Shareable,Full system" bitfld.long 0x00 9. "FB,Force Broadcast of TLB maintenance BPIALL and ICIALLU instructions" "Disabled,Enabled" newline bitfld.long 0x00 8. "VA,Virtual External Asynchronous Abort" "No aborted,Aborted" bitfld.long 0x00 7. "VI,Virtual IRQ interrupt" "No interrupt,Interrupt" newline bitfld.long 0x00 6. "VF,Virtual FIQ interrupt" "No interrupt,Interrupt" bitfld.long 0x00 5. "AMO,A-bit Mask Override" "No override,Override" newline bitfld.long 0x00 4. "IMO,I-bit Mask Override" "No override,Override" bitfld.long 0x00 3. "FMO,F-bit Mask Override" "No override,Override" newline bitfld.long 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled" bitfld.long 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override" newline bitfld.long 0x00 0. "VM,Second Stage of Translation Enable" "Disabled,Enabled" group.long c15:0x4411++0x00 line.long 0x00 "HCR2,Hypervisor Configuration Register 2" bitfld.long 0x00 1. "ID,Stage 2 Instruction cache disable" "No,Yes" bitfld.long 0x00 0. "CD,Stage 2 Data cache disable" "No,Yes" group.long c15:0x4111++0x00 line.long 0x00 "HDCR,Hypervisor Debug Control Register" bitfld.long 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid" bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid" newline bitfld.long 0x00 9. "TDA,Trap Debug Access" "No effect,Valid" bitfld.long 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid" newline bitfld.long 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled" bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid" newline bitfld.long 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid" bitfld.long 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long c15:0x4211++0x00 line.long 0x00 "HCPTR,Hypervisor Architectural Feature Trap Register" bitfld.long 0x0 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped" bitfld.long 0x0 15. "TASE,Trap Advanced SIMD extensions" "Not trapped,Trapped" newline bitfld.long 0x0 11. "TCP11,Trap coprocessor 11" "Not trapped,Trapped" bitfld.long 0x0 10. "TCP10,Trap coprocessor 10" "Not trapped,Trapped" group.long c15:0x4311++0x00 line.long 0x00 "HSTR,Hypervisor System Trap Register" bitfld.long 0x00 16. "TTEE,Trap ThumbEE" "Not supported,?..." bitfld.long 0x00 15. "T15,Trap coprocessor primary register CRn = 15" "No effect,Trapped" newline bitfld.long 0x00 13. "T13,Trap coprocessor primary register CRn = 13" "No effect,Trapped" bitfld.long 0x00 12. "T12,Trap coprocessor primary register CRn = 12" "No effect,Trapped" newline bitfld.long 0x00 11. "T11,Trap coprocessor primary register CRn = 11" "No effect,Trapped" bitfld.long 0x00 10. "T10,Trap coprocessor primary register CRn = 10" "No effect,Trapped" newline bitfld.long 0x00 9. "T9,Trap coprocessor primary register CRn = 9" "No effect,Trapped" bitfld.long 0x00 8. "T8,Trap coprocessor primary register CRn = 8" "No effect,Trapped" newline bitfld.long 0x00 7. "T7,Trap coprocessor primary register CRn = 7" "No effect,Trapped" bitfld.long 0x00 6. "T6,Trap coprocessor primary register CRn = 6" "No effect,Trapped" newline bitfld.long 0x00 5. "T5,Trap coprocessor primary register CRn = 5" "No effect,Trapped" bitfld.long 0x00 3. "T3,Trap coprocessor primary register CRn = 3" "No effect,Trapped" newline bitfld.long 0x00 2. "T2,Trap coprocessor primary register CRn = 2" "No effect,Trapped" bitfld.long 0x00 1. "T1,Trap coprocessor primary register CRn = 1" "No effect,Trapped" newline bitfld.long 0x00 0. "T0,Trap coprocessor primary register CRn = 0" "No effect,Trapped" group.quad c15:0x14020++0x01 line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register" hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address" group.long c15:0x4202++0x00 line.long 0x00 "HTCR,Hypervisor Translation Control Register" bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7" group.quad c15:0x16020++0x01 line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register" hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table" hexmask.quad 0x00 1.--47. 1. "BADDR,Translation table base address" group.long c15:0x4212++0x00 line.long 0x00 "VTCR,Virtualization Translation Control Register" bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "Non-shareable,Reserved,Outer Shareable,Inner Shareable" bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" newline bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable" bitfld.long 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "Second,First,?..." newline bitfld.long 0x00 4. "S,Sign-extension of the T0SZ field" "Low,High" bitfld.long 0x00 0.--3. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long c15:0x4006++0x00 line.long 0x00 "HDFAR,Hypervisor Data Fault Address Register" rgroup.long c15:0x4015++0x00 line.long 0x00 "HADFSR,Hypervisor Auxiliary Data Fault Status Syndrome Register" rgroup.long c15:0x4115++0x00 line.long 0x00 "HAIFSR,Hypervisor Auxiliary Instruction Fault Status Register" if ((per.l(c15:0x04025)&0xFC000000)==(0x00000000||0x38000000||0x88000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" elif (((per.l(c15:0x4025))&0xFC000000)==0x4000000) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE" endif elif (((per.l(c15:0x4025))&0xFC000000)==(0xC000000||0x20000000||0x14000000)) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 17.--19. "OPC2,The Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--16. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--13. "CRN,The CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCR,MRC/VMRS" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 17.--19. "OPC2,The Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 14.--16. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7" bitfld.long 0x00 10.--13. "CRN,The CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCR,MRC/VMRS" endif elif (((per.l(c15:0x4025))&0xFC000000)==(0x10000000||0x30000000)) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10.--13. "RT2,The Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCRR,MRRC" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 16.--19. "OPC1,The Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--13. "RT2,The Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--8. "RT,The Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 1.--4. "CRM,The CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "MCRR,MRRC" endif elif (((per.l(c15:0x4025))&0xFC000000)==0x18000000) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) if (((per.l(c15:0x4025))&0x08)==0x08) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" newline bitfld.long 0x00 1.--3. "AM,Addressing mode" "Imm unindexed,Imm post-indexed,Imm offset,Imm pre-indexed,Literal unindexed (A32),Reserved,Literal offset (A32),?..." bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "STC,LDC" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" bitfld.long 0x00 5.--8. "RN,The Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.long 0x00 1.--3. "AM,Addressing mode" "Imm unindexed,Imm post-indexed,Imm offset,Imm pre-indexed,Literal unindexed (A32),Reserved,Literal offset (A32),?..." newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "STC,LDC" endif else if (((per.l(c15:0x4025))&0x08)==0x08) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" bitfld.long 0x00 1.--3. "AM,Addressing mode" "Imm unindexed,Imm post-indexed,Imm offset,Imm pre-indexed,Literal unindexed (A32),Reserved,Literal offset (A32),?..." newline bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "STC,LDC" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction" newline bitfld.long 0x00 5.--8. "RN,The Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added" newline bitfld.long 0x00 1.--3. "AM,Addressing mode" "Imm unindexed,Imm post-indexed,Imm offset,Imm pre-indexed,Literal unindexed (A32),Reserved,Literal offset (A32),?..." bitfld.long 0x00 0. "DIRECTION,Indicates the direction of the trapped instruction" "STC,LDC" endif endif elif (((per.l(c15:0x4025))&0xFC000000)==0x1C000000) if (((per.l(c15:0x4025))&0x1000000)==0x1000000) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5. "TA,Indicates trapped use of Advanced SIMD functionality" "Not occurred,Occurred" bitfld.long 0x00 0.--3. "COPROC,The number of the coprocessor accessed by the trapped operation" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CP10,?..." else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 5. "TA,Indicates trapped use of Advanced SIMD functionality" "Not occurred,Occurred" newline bitfld.long 0x00 0.--3. "COPROC,The number of the coprocessor accessed by the trapped operation" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CP10,?..." endif elif (((per.l(c15:0x4025))&0xFC000000)==(0x44000000||0x48000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline hexmask.long.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction" elif ((((per.l(c15:0x4025))&0xFC000000)==(0x80000000||0x84000000))&&(((per.l(c15:0x4025))&0x3F)==0x10)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 10. "FNV,FAR not Valid" "HIFAR valid,HIFAR invalid" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" newline bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Reserved,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,?..." elif ((((per.l(c15:0x4025))&0xFC000000)==(0x80000000||0x84000000))&&(((per.l(c15:0x4025))&0x3F)!=0x10)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 9. "EA,External abort type" "Internal,External" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,Reserved,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Reserved,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,?..." elif (((per.l(c15:0x4025))&0xFD000000)==(0x91000000||0x95000000)) if (((per.l(c15:0x4025))&0x3F)==(0x11)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.long 0x00 16.--19. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14. "AR,Acquire/Release semantics present" "Absent,Present" bitfld.long 0x00 10.--11. "AET,Asynchronous Error Type" "UC,UEU,UEO/CE,UER" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." else if (((per.l(c15:0x4025))&0x3F)==(0x10)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.long 0x00 16.--19. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14. "AR,Acquire/Release semantics present" "Absent,Present" bitfld.long 0x00 10. "FNV,FAR not Valid" "Valid,Invalid" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword" newline bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required" bitfld.long 0x00 16.--19. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 14. "AR,Acquire/Release semantics present" "Absent,Present" bitfld.long 0x00 9. "EA,External abort type" "Internal,External" newline bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" newline bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." endif endif elif (((per.l(c15:0x4025))&0xFD000000)==(0x90000000||0x94000000)) if (((per.l(c15:0x4025))&0x3F)==(0x11)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 10.--11. "AET,Asynchronous Error Type" "UC,UEU,UEO/CE,UER" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." else if (((per.l(c15:0x4025))&0x3F)==(0x10)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 10. "FNV,FAR not Valid" "Valid,Invalid" newline bitfld.long 0x00 9. "EA,External abort type" "Internal,External" bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" newline bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" newline bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Invalid,Valid" bitfld.long 0x00 9. "EA,External abort type" "Internal,External" newline bitfld.long 0x00 8. "CM,Cache maintenance" "Not generated,Generated" bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an access for a stage 1 translation table walk" "Not occurred,Occurred" newline bitfld.long 0x00 6. "WNR,Write not Read as abort cause" "Read,Write" bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address/TTBR,Address/Lvl1,Address/Lvl2,Address/Lvl3,Reserved,Translation/Lvl1,Translation/Lvl2,Translation/Lvl3,Reserved,Access flag/Lvl1,Access flag/Lvl2,Access flag/Lvl3,Reserved,Permission/Lvl1,Permission/Lvl2,Permission/Lvl3,SEA/Not ECC/Not on TTBW,SError int,Reserved,Reserved,Reserved,SEA/Not ECC/On TTBW lvl1,SEA/Not ECC/On TTBW lvl2,SEA/Not ECC/On TTBW lvl3,SPE on mem access/Not on TTBW,SError int from parity/ECC err on mem access,Reserved,Reserved,Reserved,SPE on mem access/On TTBW lvl1,SPE on mem access/On TTBW lvl2,SPE on mem access/On TTBW lvl3,Reserved,Alignment fault,Debug (only from Hypervisor mode),Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict abort,Reserved,Reserved,Reserved,Lockdown fault,Unsupp Exclusive acc fault,?..." endif endif elif (((per.l(c15:0x4025))&0xFD000000)==(0x4C000000||0x4D000000)) if (((per.l(c15:0x4025))&0xF0000)==(0x80000)) if (((per.l(c15:0x4025))&0x1000000)==(0x1000000)) group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 20.--23. "COND,The condition code for the trapped instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 19. "CCKNOWNPASS,Trapped instruction" "Unconditional,Conditional" else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 24. "CV,Condition code valid" "Invalid,Valid" bitfld.long 0x00 19. "CCKNOWNPASS,Trapped instruction" "Unconditional,Conditional" endif else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline bitfld.long 0x00 19. "CCKNOWNPASS,Trapped instruction" "Unconditional,Conditional" endif else group.long c15:0x4025++0x00 line.long 0x00 "HSR,Hypervisor Syndrome Register" bitfld.long 0x00 26.--31. "EC,Exception class (reason)" "Unknown reason,Trapped WFI/WFE,Reserved,Trapped MCR/MRC to CP15,Trapped MCRR/MRRC to CP15,Trapped MCR/MRC to CP14,Trapped LDC/STC to CP14,Trapped SIDM/Floating point register,Trapped MRC/VMRS to CP10,Reserved,Reserved,Reserved,Trapped MRRC/MCRR to CP14,Reserved,Illegal state to AArch32,Reserved,Reserved,SVC taken to Hyp,HVC executed,Trapped SMC,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Entry into Hypervisor mode Instruction Abort,Executing within Hypervisor mode Instruction Abort,PC alignment fault exception,Reserved,Entry into Hypervisor mode Data Abort,Executing within Hypervisor mode Data Abort,?..." bitfld.long 0x00 25. "IL,Instruction length" "16-bit,32-bit" newline hexmask.long 0x00 0.--24. 1. "ISS,Instruction specific syndrome" endif group.long c15:0x4206++0x00 line.long 0x00 "HIFAR,Hypervisor Instruction Fault Address Register" group.long c15:0x4406++0x00 line.long 0x00 "HPFAR,Hypervisor IPA Fault Address Register" hexmask.long 0x00 4.--31. 1. "FIPA[39:12],Bits [39:12] of the faulting intermediate physical address" tree.open "Hypervisor Memory Attribute Indirection Registers" group.long c15:0x402A++0x00 line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" group.long c15:0x412A++0x00 line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1" bitfld.long 0x00 28.--31. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 24.--27. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 20.--23. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 16.--19. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 12.--15. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 8.--11. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" newline bitfld.long 0x00 4.--7. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient" bitfld.long 0x00 0.--3. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient" tree.end newline group.long c15:0x400C++0x00 line.long 0x00 "HVBAR,Hypervisor Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 "HVBADDR,Hypervisor Vector Base Address" tree.end tree "Cache Control and Configuration" rgroup.long c15:0x0100++0x0 line.long 0x0 "CTR,Cache Type Register" bitfld.long 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.long 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." bitfld.long 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." newline bitfld.long 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,VIPT,?..." bitfld.long 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..." rgroup.long c15:0x1100++0x0 line.long 0x0 "CLIDR,Cache Level ID Register" bitfld.long 0x00 30.--31. "ICB,Inner cache boundary" "Not disclosed,?..." bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,?..." bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,No L2 cache,L1/L2 cleaned,?..." newline bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,L2 cache not implemented,L2 cache implemented,?..." bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..." bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "No cache,Reserved,Reserved,Reserved,Unified,?..." newline bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Separate I/D,?..." rgroup.long c15:0x1000++0x0 line.long 0x0 "CCSIDR,Current Cache Size ID Register" bitfld.long 0x00 31. "WT,Write-Through" "Not Supported,?..." bitfld.long 0x00 30. "WB,Write-Back" "Not Supported,Supported" bitfld.long 0x00 29. "RA,Read-Allocate" "Not Supported,Supported" newline bitfld.long 0x00 28. "WA,Write-Allocate" "Not Supported,Supported" hexmask.long.word 0x00 13.--27. 1. "SETS,Number of Sets" hexmask.long.word 0x00 3.--12. 1. "ASSOC,Associativity" newline bitfld.long 0x00 0.--2. "LSIZE,Line Size" "Reserved,Reserved,16 words,?..." group.long c15:0x2000++0x0 line.long 0x0 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,?..." bitfld.long 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction" tree "Level 1 memory system" rgroup.long c15:0x300F++0x00 line.long 0x00 "DL1DATA0,Data L1 Data 0 Register" rgroup.long c15:0x310F++0x00 line.long 0x00 "DL1DATA1,Data L1 Data 1 Register" rgroup.long c15:0x320F++0x00 line.long 0x00 "DL1DATA2,Data L1 Data 2 Register" rgroup.long c15:0x330F++0x00 line.long 0x00 "DL1DATA3,Data L1 Data 3 Register" wgroup.long c15:0x302F++0x00 line.long 0x00 "DCTROR,Data Cache Tag Read Operation Register" wgroup.long c15:0x312F++0x00 line.long 0x00 "ICTROR,Instruction Cache Tag Read Operation Register" wgroup.long c15:0x304F++0x00 line.long 0x00 "DCDROR,Data Cache Data Read Operation Register" wgroup.long c15:0x314F++0x00 line.long 0x00 "ICDROR,Instruction Cache Data Read Operation Register" wgroup.long c15:0x324F++0x00 line.long 0x00 "TLBDROR,TLB Data Read Operation Register" tree.end tree "Level 2 memory system" rgroup.long c15:0x1209++0x0 line.long 0x00 "L2CTLR,L2 Control Register" bitfld.long 0x00 24.--25. "NCPU,Number of CPU" "1,2,3,4" bitfld.long 0x00 22. "CPUCP,CPU Cache Protection" "Not implemented,ECC implemented" bitfld.long 0x00 21. "SCUL2CP,SCU-L2 Cache Protection" "Not implemented,ECC implemented" newline bitfld.long 0x00 5. "DRAMIL,L2 data RAM input latency" "1 cycle,2 cycles" bitfld.long 0x00 0. "DRAMOL,L2 data RAM output latency" "2 cycles,3 cycles" group.long c15:0x1309++0x0 line.long 0x00 "L2ECTLR,L2 Extended Control Register" bitfld.long 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error" bitfld.long 0x00 29. "AACASYNCERR,AXI/ACE/CHI asynchronous error" "No error,Error" bitfld.long 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks" group.long c15:0x100F++0x00 line.long 0x00 "L2ACTLR,L2 Auxiliary Control Register" bitfld.long 0x00 30.--31. "L2VC,L2 victim Control" "0,1,2,3" newline bitfld.long 0x00 29. "L2DEIEN,L2 cache data RAM error injection enable" "Disabled,Enabled" bitfld.long 0x00 24. "L2TEIEN,L2 cache tag RAM error injection enable" "Disabled,Enabled" newline bitfld.long 0x00 14. "EUCE,Enables UniqueClean evictions with data" "Disabled,Enabled" bitfld.long 0x00 3. "DCEPTE,Disables clean/evict push to external" "No,Yes" if (((per.q(c15:0x130F0))&0x7F000000)==0x10000000) group.quad c15:0x130F0++0x01 line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--21. "C/W,Indicates the RAM where the first memory error occurred" "Way 0,Way 1,Way 2,Way 3,Way 4,Way 5,Way 6,Way 7,?..." newline hexmask.quad.tbyte 0x00 3.--16. 0x08 "RAD,RAM address" elif (((per.q(c15:0x130F0))&0x7F000000)==0x11000000) group.quad c15:0x130F0++0x01 line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--21. "C/W,Indicates the RAM where the first memory error occurred" "Bank 0,Bank 1,Bank 2,Bank 3,Bank 4,Bank 5,Bank 6,Bank 7,?..." newline hexmask.quad.tbyte 0x00 3.--16. 0x08 "RAD,RAM address" elif (((per.q(c15:0x130F0))&0x7F000000)==0x12000000) group.quad c15:0x130F0++0x01 line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" bitfld.quad 0x00 18.--21. "C/W,Indicates the RAM where the first memory error occurred" "CPU0/Way 0,CPU0/Way 1,CPU0/Way 2,CPU0/Way 3,CPU1/Way 0,CPU1/Way 1,CPU1/Way 2,CPU1/Way 3,CPU2/Way 0,CPU2/Way 1,CPU2/Way 2,CPU2/Way 3,CPU3/Way 0,CPU3/Way 1,CPU3/Way 2,CPU3/Way 3" newline hexmask.quad.tbyte 0x00 3.--16. 0x08 "RAD,RAM address" else group.quad c15:0x130F0++0x01 line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register" bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1" hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count" newline hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count" bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid" newline hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier" newline hexmask.quad.tbyte 0x00 3.--16. 0x08 "RAD,RAM address" endif tree.end tree.end tree "System Performance Monitor" group.long c15:0x00c9++0x00 line.long 0x00 "PMCR,Performance Monitor Control Register" hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code" hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code" bitfld.long 0x00 11.--15. "N,Number of counters implemented" "0,1,2,3,4,5,6,?..." bitfld.long 0x00 6. "LC,Long cycle count enable" "Disabled,Enabled" newline bitfld.long 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes" bitfld.long 0x00 4. "X,Export Enable" "Disabled,Enabled" bitfld.long 0x00 3. "D,Clock Divider" "Every cycle,64th cycle" bitfld.long 0x00 2. "C,Clock Counter Reset" "No reset,?..." newline bitfld.long 0x00 1. "P,Performance Counter Reset" "No reset,?..." bitfld.long 0x00 0. "E,All Counters Enable" "Disabled,Enabled" group.long c15:0x01c9++0x00 line.long 0x00 "PMCNTENSET,Count Enable Set Register " bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,Event Counter 5 enable bit" "Disabled,Enabled" bitfld.long 0x00 4. "P4,Event Counter 4 enable bit" "Disabled,Enabled" bitfld.long 0x00 3. "P3,Event Counter 3 enable bit" "Disabled,Enabled" newline bitfld.long 0x00 2. "P2,Event Counter 2 enable bit" "Disabled,Enabled" bitfld.long 0x00 1. "P1,Event Counter 1 enable bit" "Disabled,Enabled" bitfld.long 0x00 0. "P0,Event Counter 0 enable bit" "Disabled,Enabled" group.long c15:0x02c9++0x00 line.long 0x00 "PMCNTENCLR,Count Enable Clear Register" eventfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" eventfld.long 0x00 5. "P5,Event Counter 5 clear bit" "Disabled,Enabled" eventfld.long 0x00 4. "P4,Event Counter 4 clear bit" "Disabled,Enabled" eventfld.long 0x00 3. "P3,Event Counter 3 clear bit" "Disabled,Enabled" newline eventfld.long 0x00 2. "P2,Event Counter 2 clear bit" "Disabled,Enabled" eventfld.long 0x00 1. "P1,Event Counter 1 clear bit" "Disabled,Enabled" eventfld.long 0x00 0. "P0,Event Counter 0 clear bit" "Disabled,Enabled" group.long c15:0x03c9++0x00 line.long 0x00 "PMOVSR,Performance Monitor Overflow Status Register" eventfld.long 0x00 31. "C,PMCCNTR overflow" "No overflow,Overflow" eventfld.long 0x00 5. "P5,PMN5 overflow" "No overflow,Overflow" eventfld.long 0x00 4. "P4,PMN4 overflow" "No overflow,Overflow" eventfld.long 0x00 3. "P3,PMN3 overflow" "No overflow,Overflow" newline eventfld.long 0x00 2. "P2,PMN2 overflow" "No overflow,Overflow" eventfld.long 0x00 1. "P1,PMN1 overflow" "No overflow,Overflow" eventfld.long 0x00 0. "P0,PMN0 overflow" "No overflow,Overflow" wgroup.long c15:0x04c9++0x00 line.long 0x00 "PMSWINC,Performance Monitor Software Increment" bitfld.long 0x00 5. "P5,Increment PMN5" "No action,Increment" bitfld.long 0x00 4. "P4,Increment PMN4" "No action,Increment" bitfld.long 0x00 3. "P3,Increment PMN3" "No action,Increment" bitfld.long 0x00 2. "P2,Increment PMN2" "No action,Increment" newline bitfld.long 0x00 1. "P1,Increment PMN1" "No action,Increment" bitfld.long 0x00 0. "P0,Increment PMN0" "No action,Increment" group.long c15:0x05c9++0x00 line.long 0x00 "PMSELR,Performance Monitor Select Register" bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.open "Common Event Identification Registers" rgroup.long c15:0x06C9++0x00 line.long 0x00 "PMCEID0,Common Event Identification Register 0" bitfld.long 0x00 31. "EVENT31,L1 Data cache allocate" "Not implemented,?..." bitfld.long 0x00 30. "EVENT30,Chain" "Reserved,Implemented" newline bitfld.long 0x00 29. "EVENT29,Bus cycle" "Reserved,Implemented" bitfld.long 0x00 28. "EVENT28,Instruction architecturally executed condition check pass" "Not implemented,?..." bitfld.long 0x00 27. "EVENT27,Instruction speculatively executed" "Reserved,Implemented" newline bitfld.long 0x00 26. "EVENT26,Local memory error" "Reserved,Implemented" bitfld.long 0x00 25. "EVENT25,Bus access" "Reserved,Implemented" bitfld.long 0x00 24. "EVENT24,Level 2 data cache write-back" "Not implemented,Implemented" newline bitfld.long 0x00 23. "EVENT23,Level 2 data cache refill" "Not implemented,Implemented" bitfld.long 0x00 22. "EVENT22,Level 2 data cache access" "Not implemented,Implemented" bitfld.long 0x00 21. "EVENT21,Level 1 data cache write-back" "Reserved,Implemented" newline bitfld.long 0x00 20. "EVENT20,Level 1 instruction cache access" "Reserved,Implemented" bitfld.long 0x00 19. "EVENT19,Data memory access" "Reserved,Implemented" bitfld.long 0x00 18. "EVENT18,Predictable branch speculatively executed" "Reserved,Implemented" newline bitfld.long 0x00 17. "EVENT17,Cycle" "Reserved,Implemented" bitfld.long 0x00 16. "EVENT16,Mispredicted or not predicted branch speculatively executed" "Reserved,Implemented" bitfld.long 0x00 15. "EVENT15,Instruction architecturally executed condition check pass unaligned load or store" "Reserved,Implemented" newline bitfld.long 0x00 14. "EVENT14,Instruction architecturally executed condition check pass procedure return" "Not implemented,?..." bitfld.long 0x00 13. "EVENT13,Instruction architecturally executed immediate branch" "Reserved,Implemented" bitfld.long 0x00 12. "EVENT12,Instruction architecturally executed condition check pass software change of the PC" "Reserved,Implemented" newline bitfld.long 0x00 11. "EVENT11,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Reserved,Implemented" bitfld.long 0x00 10. "EVENT10,Instruction architecturally executed condition check pass exception return" "Reserved,Implemented" bitfld.long 0x00 9. "EVENT9,Exception taken" "Reserved,Implemented" newline bitfld.long 0x00 8. "EVENT8,Instruction architecturally executed" "Reserved,Implemented" bitfld.long 0x00 7. "EVENT7,Instruction architecturally executed condition check pass store" "Reserved,Implemented" bitfld.long 0x00 6. "EVENT6,Instruction architecturally executed condition check pass load" "Reserved,Implemented" newline bitfld.long 0x00 5. "EVENT5,Level 1 data TLB refill" "Reserved,Implemented" bitfld.long 0x00 4. "EVENT4,Level 1 data cache access" "Reserved,Implemented" bitfld.long 0x00 3. "EVENT3,Level 1 data cache refill" "Reserved,Implemented" newline bitfld.long 0x00 2. "EVENT2,Level 1 instruction TLB refill" "Reserved,Implemented" bitfld.long 0x00 1. "EVENT1,Level 1 instruction cache refill" "Reserved,Implemented" bitfld.long 0x00 0. "EVENT0,Instruction architecturally executed condition check pass software increment" "Reserved,Implemented" rgroup.long c15:0x07C9++0x0 line.long 0x00 "PMCEID1,Common Event Identification Register 1" bitfld.long 0x00 16. "EVENT48,Attributable Level 2 instruction TLB access" "Not implemented,?..." bitfld.long 0x00 15. "EVENT47,Attributable Level 2 data or unified TLB access" "Not implemented,?..." bitfld.long 0x00 14. "EVENT46,Attributable Level 2 instruction TLB refill" "Not implemented,?..." newline bitfld.long 0x00 13. "EVENT45,Attributable Level 2 data or unified TLB refill" "Not implemented,?..." bitfld.long 0x00 12. "EVENT44,Attributable Level 3 data or unified cache write-back" "Not implemented,?..." bitfld.long 0x00 11. "EVENT43,Attributable Level 3 data or unified cache access" "Not implemented,?..." newline bitfld.long 0x00 10. "EVENT42,Attributable Level 3 data or unified cache refill" "Not implemented,?..." bitfld.long 0x00 9. "EVENT41,Attributable Level 3 data or unified cache allocation without refill" "Not implemented,?..." bitfld.long 0x00 8. "EVENT40,Attributable Level 2 instruction cache refill" "Not implemented,?..." newline bitfld.long 0x00 7. "EVENT39,Attributable Level 2 instruction cache access" "Not implemented,?..." bitfld.long 0x00 6. "EVENT38,Level 1 instruction TLB access" "Not implemented,?..." bitfld.long 0x00 5. "EVENT37,Level 1 data or unified TLB access" "Not implemented,?..." newline bitfld.long 0x00 4. "EVENT36,No operation issued due to backend" "Not implemented,?..." bitfld.long 0x00 3. "EVENT35,No operation issued due to the frontend" "Not implemented,?..." bitfld.long 0x00 2. "EVENT34,Instruction architecturally executed mispredicted branch" "Not implemented,?..." newline bitfld.long 0x00 1. "EVENT33,Instruction architecturally executed branch" "Not implemented,?..." bitfld.long 0x00 0. "EVENT32,Level 2 data cache allocation without refill" "Not implemented,?..." tree.end newline if (((per.q(c15:0x00c9))&0x40)==0x40) group.quad c15:0x10090++0x01 line.quad 0x00 "PMCCNTR,Performance Monitor Cycle Count Register" else group.long c15:0x00d9++0x00 line.long 0x00 "PMCCNTR,Performance Monitor Cycle Count Register" endif if (((per.q(c15:0x05c9))&0x1F)==0x1F) group.long c15:0x01d9++0x00 line.long 0x00 "PMXEVTYPER,Performance Monitor Event Type Register" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" else group.long c15:0x01d9++0x00 line.long 0x00 "PMXEVTYPER,Performance Monitor Event Type Register" endif group.long c15:0x02d9++0x00 line.long 0x00 "PMXEVCNTR,Performance Monitor Event Count Register" group.long c15:0x00e9++0x00 line.long 0x00 "PMUSERENR,Performance Monitor User Enable Register" bitfld.long 0x00 3. "ER,Event counter read enable" "Disabled,Enabled" bitfld.long 0x00 2. "CR,Cycle counter read enable" "Disabled,Enabled" bitfld.long 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,User mode access enable" "Disabled,Enabled" group.long c15:0x01e9++0x00 line.long 0x00 "PMINTENSET,Performance Monitor Interrupt Enable Set" bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x02e9++0x00 line.long 0x00 "PMINTENCLR,Performance Monitor Interrupt Enable Clear" eventfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" eventfld.long 0x00 5. "P5,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.long 0x00 4. "P4,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.long 0x00 3. "P3,Overflow Interrupt Clear" "Disabled,Enabled" newline eventfld.long 0x00 2. "P2,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.long 0x00 1. "P1,Overflow Interrupt Clear" "Disabled,Enabled" eventfld.long 0x00 0. "P0,Overflow Interrupt Clear" "Disabled,Enabled" group.long c15:0x03e9++0x00 line.long 0x00 "PMOVSSET,Performance Monitor Overflow Flag Status Set Register" bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled" bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x8E++0x00 line.long 0x00 "PMEVCNTR0,Performance Monitors Event Count Register 0" group.long c15:(0x8E+0x40)++0x00 line.long 0x00 "PMEVTYPER0,Performance Monitors Selected Event Type Register 0" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.long c15:0x18E++0x00 line.long 0x00 "PMEVCNTR1,Performance Monitors Event Count Register 1" group.long c15:(0x18E+0x40)++0x00 line.long 0x00 "PMEVTYPER1,Performance Monitors Selected Event Type Register 1" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.long c15:0x28E++0x00 line.long 0x00 "PMEVCNTR2,Performance Monitors Event Count Register 2" group.long c15:(0x28E+0x40)++0x00 line.long 0x00 "PMEVTYPER2,Performance Monitors Selected Event Type Register 2" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.long c15:0x38E++0x00 line.long 0x00 "PMEVCNTR3,Performance Monitors Event Count Register 3" group.long c15:(0x38E+0x40)++0x00 line.long 0x00 "PMEVTYPER3,Performance Monitors Selected Event Type Register 3" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.long c15:0x48E++0x00 line.long 0x00 "PMEVCNTR4,Performance Monitors Event Count Register 4" group.long c15:(0x48E+0x40)++0x00 line.long 0x00 "PMEVTYPER4,Performance Monitors Selected Event Type Register 4" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.long c15:0x58E++0x00 line.long 0x00 "PMEVCNTR5,Performance Monitors Event Count Register 5" group.long c15:(0x58E+0x40)++0x00 line.long 0x00 "PMEVTYPER5,Performance Monitors Selected Event Type Register 5" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count" group.long c15:0x07FE++0x00 line.long 0x00 "PMCCFILTR,Performance Monitors Cycle Count Filter Register" bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled" bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled" bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled" newline bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled" tree.end tree "System Timer Registers" group.long c15:0x000E++0x00 line.long 0x00 "CNTFRQ,Counter Frequency Register" rgroup.quad c15:0x100E0++0x01 line.quad 0x00 "CNTPCT,Counter Physical Count Register" group.long c15:0x001E++0x00 line.long 0x00 "CNTKCTL,Timer PL1 Control Register" bitfld.long 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 modes" "Not accessible,Accessible" bitfld.long 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 modes" "Not accessible,Accessible" bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0" newline bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled" bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter CNTVCT and the frequency register CNTFRQ are accessible from EL0 modes" "Not accessible,Accessible" bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter CNTPCT and the frequency register CNTFRQ are accessible from EL0 modes" "Not accessible,Accessible" group.long c15:0x002E++0x00 line.long 0x00 "CNTP_TVAL,Counter PL1 Physical Compare Value Register" if (((per.q(c15:0x012E))&0x01)==0x01) group.long c15:0x012E++0x00 line.long 0x00 "CNTP_CTL,Counter PL1 Physical Timer Control Register" rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" else group.long c15:0x012E++0x00 line.long 0x00 "CNTP_CTL,Counter PL1 Physical Timer Control Register" bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" endif group.long c15:0x003E++0x00 line.long 0x00 "CNTV_TVAL,Counter PL1 Virtual Timer Value Register" if (((per.q(c15:0x013E))&0x01)==0x01) group.long c15:0x013E++0x00 line.long 0x00 "CNTV_CTL,Counter PL1 Virtual Timer Control Register" rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" else group.long c15:0x013E++0x00 line.long 0x00 "CNTV_CTL,Counter PL1 Virtual Timer Control Register" bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" endif group.quad c15:0x110E0++0x01 line.quad 0x00 "CNTVCT,Counter Virtual Count Register" group.quad c15:0x120E0++0x01 line.quad 0x00 "CNTP_CVAL,Counter PL1 Physical Compare Value Register" group.quad c15:0x130E0++0x01 line.quad 0x00 "CNTV_CVAL,Counter PL1 Virtual Compare Value Register" group.quad c15:0x140E0++0x01 line.quad 0x00 "CNTVOFF,Counter Virtual Offset Register" group.long c15:0x401E++0x00 line.long 0x00 "CNTHCTL,Counter Non-secure PL2 Control Register" bitfld.long 0x00 4.--7. "EVNTI,Select trigger for the event stream generated from counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0" bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled" newline bitfld.long 0x00 1. "EL1VCTEN,Controls whether the Non-secure copies of the physical timer registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" bitfld.long 0x00 0. "EL1PCTEN,Controls whether the physical counter CNTPCT is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible" group.long c15:0x402E++0x00 line.long 0x00 "CNTHP_TVAL,Counter Non-secure PL2 Physical Timer Value Register" if (((per.q(c15:0x412E))&0x01)==0x01) group.long c15:0x412E++0x00 line.long 0x00 "CNTHP_CTL,Counter Non-secure PL2 Physical Timer Control Register" rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt" bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" else group.long c15:0x412E++0x00 line.long 0x00 "CNTHP_CTL,Counter Non-secure PL2 Physical Timer Control Register" bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked" bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled" endif group.quad c15:0x160E0++0x01 line.quad 0x00 "CNTHP_CVAL,Counter Non-secure PL2 Physical Compare Value Register" tree.end tree "Generic Interrupt Controller System Registers" tree "AArch32 GIC Physical CPU Interface System Registers" tree.open "Interrupt Controller Active Priorities Registers" group.long c15:0x048C++0x00 line.long 0x00 "ICC_AP0R0,Active Priorities 0 Register 0" bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.long c15:0x009C++0x00 line.long 0x00 "ICC_AP1R0,Active Priorities 1 Register 0" bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline if (((per.q(c15:0x110C0))&0x10000000000)==0x00) wgroup.quad c15:0x110C0++0x01 line.quad 0x00 "ICC_ASGI1R,Alternate SGI Generation Register 1" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List" else wgroup.quad c15:0x110C0++0x01 line.quad 0x00 "ICC_ASGI1R,Alternate SGI Generation Register 1" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.long c15:0x038C++0x00 line.long 0x00 "ICC_BPR0,Binary Point Register 0" bitfld.long 0x00 0.--2. "BINARYPOINT,Interrupt priority field control and interrupt preemption control" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.long c15:0x03CC++0x00 line.long 0x00 "ICC_BPR1,Binary Point Register 1" bitfld.long 0x00 0.--2. "BINARYPOINT,Interrupt priority field control and interrupt preemption control" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" group.long c15:0x04CC++0x00 line.long 0x00 "ICC_CTLR,Interrupt Control Registers for EL1" rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Reserved,Supported" rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported" rbitfld.long 0x00 14. "SEIS,SEI Support" "Not supported,Supported" rbitfld.long 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,24 bits,?..." newline rbitfld.long 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" bitfld.long 0x00 1. "EOIMODE,Alias of ICC_MCTLR.EOImode_EL1" "0,1" newline bitfld.long 0x00 0. "CBPR,Common Binary Point Register" "0,1" group.long c15:0x64CC++0x00 line.long 0x00 "ICC_MCTLR,Interrupt Control Registers for EL3" rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Reserved,Supported" rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255" newline rbitfld.long 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported" rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported" rbitfld.long 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,Supported" newline rbitfld.long 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..." rbitfld.long 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt register also deactivates the interrupt(Non-secure EL1 and EL2)" "Enabled,Disabled" bitfld.long 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt register also deactivates the interrupt(Secure EL1)" "Enabled,Disabled" bitfld.long 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt register also deactivates the interrupt(EL3)" "Enabled,Disabled" newline bitfld.long 0x00 1. "CBPR_EL1NS,Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate registers,Same register" bitfld.long 0x00 0. "CBPR_EL1S,Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate registers,Same register" if (((per.q(c15:0x04CC))&0x3800)==0x0000) wgroup.long c15:0x01BC++0x00 line.long 0x00 "ICC_DIR,Deactivate Interrupt Register" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.long c15:0x018C++0x00 line.long 0x00 "ICC_EOIR0,End Of Interrupt Register 0" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR0 access" wgroup.long c15:0x01CC++0x00 line.long 0x00 "ICC_EOIR1,End Of Interrupt Register 1" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID from the corresponding ICC_IAR1 access." rgroup.long c15:0x028C++0x00 line.long 0x00 "ICC_HPPIR0,Highest Prioity Pending Interrupt Register 0" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.long c15:0x02CC++0x00 line.long 0x00 "ICC_HPPIR1,Highest Prioity Pending Interrupt Register 1" hexmask.long.word 0x00 0.--15. 1. "INTID,The INTID of the highest priority pending interrupt" else wgroup.long c15:0x01BC++0x00 line.long 0x00 "ICC_DIR,Deactivate Interrupt Register" hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the interrupt to be deactivated" wgroup.long c15:0x018C++0x00 line.long 0x00 "ICC_EOIR0,End Of Interrupt Register 0" hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR0 access" wgroup.long c15:0x01CC++0x00 line.long 0x00 "ICC_EOIR1,End Of Interrupt Register 1" hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR1 access." rgroup.long c15:0x028C++0x00 line.long 0x00 "ICC_HPPIR0,Highest Prioity Pending Interrupt Register 0" hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt" rgroup.long c15:0x02CC++0x00 line.long 0x00 "ICC_HPPIR1,Highest Prioity Pending Interrupt Register 1" hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt" endif hgroup.long c15:0x008C++0x00 hide.long 0x00 "ICC_IAR0,Interrupt Acknowledge Register 0" in hgroup.long c15:0x00CC++0x00 hide.long 0x00 "ICC_IAR1,Interrupt Acknowledge Register 1" in group.long c15:0x06CC++0x00 line.long 0x00 "ICC_IGRPEN0,Interrupt Group Enable Register 0" bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.long c15:0x07CC++0x00 line.long 0x00 "ICC_IGRPEN1,Interrupt Group Enable Register 1" bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled" group.long c15:0x0064++0x00 line.long 0x00 "ICC_PMR,Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface" rgroup.long c15:0x03BC++0x00 line.long 0x00 "ICC_RPR,Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface" if (((per.q(c15:0x120C0))&0x10000000000)==0x00) wgroup.quad c15:0x120C0++0x01 line.quad 0x00 "ICC_SGI0R,SGI Generation Register 0" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List" else wgroup.quad c15:0x120C0++0x01 line.quad 0x00 "ICC_SGI0R,SGI Generation Register 0" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif if (((per.q(c15:0x100C0))&0x10000000000)==0x00) wgroup.quad c15:0x100C0++0x01 line.quad 0x00 "ICC_SGI1R,SGI Generation Register 1" hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Target list,All PEs excluding self" newline hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2" bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1" hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List" else wgroup.quad c15:0x100C0++0x01 line.quad 0x00 "ICC_SGI1R,SGI Generation Register 1" newline bitfld.quad 0x00 44.--47. "RS,Range selector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Target list,All PEs excluding self" newline bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline endif group.long c15:0x05CC++0x00 line.long 0x00 "ICC_SRE,System Register Enable Register for EL1" bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled" group.long c15:0x459C++0x00 line.long 0x00 "ICC_HSRE,System Register Enable Register for EL2" bitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1" "Disabled,Enabled" bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled" group.long c15:0x65CC++0x00 line.long 0x00 "ICC_MSRE,System Register Enable Register for EL3" bitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1 and ICC_SRE_EL2" "Disabled,Enabled" bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes" bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes" newline bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled" group.long c15:0x67CC++0x00 line.long 0x00 "ICC_MGRPEN1,Monitor Group1 Interrupt Group Enable" bitfld.long 0x00 1. "ENABLEGRP1S,Enables Group 1 interrupts for the Secure state" "Disabled,Enabled" bitfld.long 0x00 0. "ENABLEGRP1NS,Enables Group 1 interrupts for the Non-secure state" "Disabled,Enabled" tree.end tree "AArch32 Virtual Interface Control System Registers" tree.open "Hypervisor Active Priorities Registers" group.long c15:0x408C++0x00 line.long 0x00 "ICH_AP0R0,Interrupt Controller Hypervisor Active Priorities Group 0 Register 0" bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt" group.long c15:0x409C++0x00 line.long 0x00 "ICH_AP1R0,Interrupt Controller Hypervisor Active Priorities Group 1 Register 0" bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt" bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt" bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt" bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt" bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt" newline bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt" bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt" bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt" bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt" bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt" newline bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt" bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt" bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt" bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt" bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt" newline bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt" bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt" bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt" bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt" bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt" newline bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt" bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt" bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt" bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt" bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt" newline bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt" bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt" bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt" bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt" newline bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt" bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt" tree.end newline rgroup.long c15:0x438C++0x00 line.long 0x00 "ICH_EISR,Interrupt Controller End of Interrupt Status Register" bitfld.long 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register 3" "No interrupt,Interrupt" bitfld.long 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register 2" "No interrupt,Interrupt" bitfld.long 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register 1" "No interrupt,Interrupt" newline bitfld.long 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register 0" "No interrupt,Interrupt" rgroup.long c15:0x458C++0x00 line.long 0x00 "ICH_ELRSR,Interrupt Controller Empty List Register Status Register" bitfld.long 0x00 3. "STATUS3,Status bit for List register 3" "Interrupt,No interrupt" bitfld.long 0x00 2. "STATUS2,Status bit for List register 2" "Interrupt,No interrupt" bitfld.long 0x00 1. "STATUS1,Status bit for List register 1" "Interrupt,No interrupt" newline bitfld.long 0x00 0. "STATUS0,Status bit for List register 0" "Interrupt,No interrupt" if (((per.q(c15:0x41BC))&0x480000)==0x480000) group.long c15:0x40BC++0x00 line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register" bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped" bitfld.long 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped" newline bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped" newline bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" elif (((per.q(c15:0x41BC))&0x480000)==0x080000) group.long c15:0x40BC++0x00 line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register" bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped" newline bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped" newline bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" elif (((per.q(c15:0x41BC))&0x480000)==0x400000) group.long c15:0x40BC++0x00 line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register" bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped" newline bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped" newline bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" else group.long c15:0x40BC++0x00 line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register" bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped" bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped" newline bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" newline bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled" endif group.long c15:(0x40CC+0x0)++0x00 line.long 0x00 "ICH_LR0,Interrupt Controller List Register 0" group.long c15:(0x40CC+0x100)++0x00 line.long 0x00 "ICH_LR1,Interrupt Controller List Register 1" group.long c15:(0x40CC+0x200)++0x00 line.long 0x00 "ICH_LR2,Interrupt Controller List Register 2" group.long c15:(0x40CC+0x300)++0x00 line.long 0x00 "ICH_LR3,Interrupt Controller List Register 3" if (((per.q(c15:0x40EC+0x0))&0x20000000)==0x20000000) group.long c15:(0x40EC+0x0)++0x00 line.long 0x00 "ICH_LRC0,Interrupt Controller List Register Extension 0" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" else group.long c15:(0x40EC+0x0)++0x00 line.long 0x00 "ICH_LRC0,Interrupt Controller List Register Extension 0" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" bitfld.long 0x00 9. "EOI,Asserted EOI maintenance interrupt" "Not asserted,Asserted" endif if (((per.q(c15:0x40EC+0x100))&0x20000000)==0x20000000) group.long c15:(0x40EC+0x100)++0x00 line.long 0x00 "ICH_LRC1,Interrupt Controller List Register Extension 1" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" else group.long c15:(0x40EC+0x100)++0x00 line.long 0x00 "ICH_LRC1,Interrupt Controller List Register Extension 1" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" bitfld.long 0x00 9. "EOI,Asserted EOI maintenance interrupt" "Not asserted,Asserted" endif if (((per.q(c15:0x40EC+0x200))&0x20000000)==0x20000000) group.long c15:(0x40EC+0x200)++0x00 line.long 0x00 "ICH_LRC2,Interrupt Controller List Register Extension 2" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" else group.long c15:(0x40EC+0x200)++0x00 line.long 0x00 "ICH_LRC2,Interrupt Controller List Register Extension 2" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" bitfld.long 0x00 9. "EOI,Asserted EOI maintenance interrupt" "Not asserted,Asserted" endif if (((per.q(c15:0x40EC+0x300))&0x20000000)==0x20000000) group.long c15:(0x40EC+0x300)++0x00 line.long 0x00 "ICH_LRC3,Interrupt Controller List Register Extension 3" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts" else group.long c15:(0x40EC+0x300)++0x00 line.long 0x00 "ICH_LRC3,Interrupt Controller List Register Extension 3" bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active" bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt meaning that it corresponds to a physical interrupt" "Triggered by Software,Hardware interrupt" bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1" newline hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt" bitfld.long 0x00 9. "EOI,Asserted EOI maintenance interrupt" "Not asserted,Asserted" endif rgroup.long c15:0x42BC++0x00 line.long 0x00 "ICH_MISR,Interrupt Controller Maintenance Interrupt State Register" bitfld.long 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted" bitfld.long 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted" bitfld.long 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted" newline bitfld.long 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted" bitfld.long 0x00 3. "NP,No Pending" "Not asserted,Asserted" bitfld.long 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted" newline bitfld.long 0x00 1. "U,Underflow" "Not asserted,Asserted" bitfld.long 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted" group.long c15:0x478C++0x00 line.long 0x00 "ICH_VMCR,Interrupt Controller Virtual Machine Control Register" hexmask.long.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface" bitfld.long 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]" bitfld.long 0x00 18.--20. "VBPR1,Virtual Binary Point Register Group 1" "Reserved,[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]" newline bitfld.long 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Disabled,Enabled" bitfld.long 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate registers,Same register" bitfld.long 0x00 3. "VFIQEN,Virtual FIQ enable" "Virtual IRQs,Virtual FIQs" newline bitfld.long 0x00 2. "VACKCTL,Virtual FIQ enable" "1022,Corresponding interrupt" bitfld.long 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled" bitfld.long 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled" group.long c15:0x449C++0x00 line.long 0x00 "ICH_VSEIR,Virtual System Error Interrupt Register" group.long c15:0x41BC++0x00 line.long 0x00 "ICH_VTR,Interrupt Controller VGIC Type Register" bitfld.long 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented minus one" "0,1,2,3,4,5,6,7" bitfld.long 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..." newline bitfld.long 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported" bitfld.long 0x00 21. "A3V,Affinity 3 Valid" "Only zero values supported,Non-zero values supported" bitfld.long 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,Not supported" newline bitfld.long 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Not supported,Supported" bitfld.long 0x00 0.--4. "LISTREGS,The number of implemented List registers minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.end tree.end tree "Debug Registers" tree "Coresight Management Registers" rgroup.long c14:0x0000++0x00 line.long 0x00 "DBGDIDR,Debug ID Register" bitfld.long 0x00 28.--31. "WRP,Number of Watchpoint Register Pairs" "Reserved,Reserved,Reserved,4,?..." bitfld.long 0x00 24.--27. "BRP,Number of Breakpoint Register Pairs" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..." bitfld.long 0x00 20.--23. "CTX_CMP,Number of BRPs with Context ID Comparison Capability" "Reserved,Two context,?..." newline hexmask.long.byte 0x00 16.--19. 1. "VERSION,Debug Architecture Version" bitfld.long 0x00 14. "NSUHD,Secure User halting debug-mode" "Reserved,Not supported" bitfld.long 0x00 12. "SE,Security Extensions implemented" "Reserved,Implemented" rgroup.long c14:0x0060++0x00 line.long 0x00 "DBGWFAR,Watchpoint Fault Address Register" group.long c14:0x0070++0x00 line.long 0x00 "DBGVCR,Debug Vector Catch register" bitfld.long 0x00 31. "FIQVCE_NS,FIQ vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 30. "IRQVCE_NS,IRQ vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 28. "DAVCE_NS,Data Abort vector catch in Non-secure state" "Disabled,Enabled" newline bitfld.long 0x00 27. "PAVCE_NS,Prefetch Abort vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 26. "SVCVCE_NS,SVC vector catch in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 25. "UIVCE_NS,Undefined instruction vector catch in Non-secure state" "Disabled,Enabled" newline bitfld.long 0x00 15. "FIQVCE_SM,FIQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" bitfld.long 0x00 14. "IRQVCE_SM,IRQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" bitfld.long 0x00 12. "DAVCE_SM,Data Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" newline bitfld.long 0x00 11. "PAVCE_SM,Prefetch Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled" bitfld.long 0x00 10. "SMCVCE_S,SMC vector catch enable in Secure state" "Disabled,Enabled" bitfld.long 0x00 7. "FIQVCE_S,FIQ vector catch in Secure state" "Disabled,Enabled" newline bitfld.long 0x00 6. "IRQVCE_S,IRG vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 4. "DAVCE_S,Data Abort vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 3. "PAVCE_S,Prefetch Abort vector catch in Secure state" "Disabled,Enabled" newline bitfld.long 0x00 2. "SVCVCE_S,SVC vector catch in Secure state" "Disabled,Enabled" bitfld.long 0x00 1. "UIVCE_S,Undefined instruction vector catch in Secure state" "Disabled,Enabled" group.long c14:0x0020++0x000 line.long 0x00 "DBGDCCINT,DCC Interrupt Enable Register" bitfld.long 0x00 30. "RX,DCC interrupt request enable control for DTRRX" "Disabled,Enabled" bitfld.long 0x00 29. "TX,DCC interrupt request enable control for DTRTX" "Disabled,Enabled" group.long c14:0x0200++0x00 line.long 0x00 "DBGDTRRXEXT,Debug Receive Register (External View)" if (((per.l(c14:0x0411))&0x02)==0x02) group.long c14:0x0220++0x00 line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)" bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" bitfld.long 0x00 27. "RXO,Used for save/restore of EDSCR.RXO" "Disabled,Enabled" newline bitfld.long 0x00 26. "TXU,Used for save/restore of EDSCR.TXU" "Disabled,Enabled" bitfld.long 0x00 22.--23. "INTDIS,Used for save/restore of EDSCR.INTdis" "Don't disabled interrupts,Disabled interrupts targeting non-sec EL1,Disabled all interrupts,Disabled all interrupts" bitfld.long 0x00 21. "TDA,Used for save/restore of EDSCR.TDA" "Disabled,Enabled" newline rbitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure" rbitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes" rbitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes" newline bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled" bitfld.long 0x00 14. "HDE,Used for save/restore of EDSCR.HDE" "Disabled,Enabled" bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes" newline bitfld.long 0x00 6. "ERR,Used for save/restore of EDSCR.ERR" "Disabled,Enabled" bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..." else group.long c14:0x0220++0x00 line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)" rbitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" rbitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" rbitfld.long 0x00 27. "RXO,Used for save/restore of EDSCR.RXO" "Disabled,Enabled" newline rbitfld.long 0x00 26. "TXU,Used for save/restore of EDSCR.TXU" "Disabled,Enabled" rbitfld.long 0x00 22.--23. "INTDIS,Used for save/restore of EDSCR.INTdis" "Don't disabled interrupts,Disabled interrupts targeting non-sec EL1,Disabled all interrupts,Disabled all interrupts" rbitfld.long 0x00 21. "TDA,Used for save/restore of EDSCR.TDA" "Disabled,Enabled" newline rbitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure" rbitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes" rbitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes" newline bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled" rbitfld.long 0x00 14. "HDE,Used for save/restore of EDSCR.HDE" "Disabled,Enabled" bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes" newline rbitfld.long 0x00 6. "ERR,Used for save/restore of EDSCR.ERR" "Disabled,Enabled" bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..." endif rgroup.long c14:0x0010++0x00 line.long 0x00 "DBGDSCRINT,Debug Status and Control Register (Internal View)" bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full" bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full" bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure" newline bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes" bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes" bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled" newline bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes" bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..." group.long c14:0x0230++0x00 line.long 0x00 "DBGDTRTXEXT,Debug Transmit Register (External View)" rgroup.long c14:0x0050++0x00 line.long 0x00 "DBGDTRTXINT,Debug Transmit Register (Internal View)" wgroup.long c14:0x0050++0x00 line.long 0x00 "DBGDTRRXINT,Debug Receive Register (Internal View)" group.long c14:0x0687++0x00 line.long 0x00 "DBGCLAIMSET,Claim Tag Set Register" bitfld.long 0x00 7. "CT7,Claim Tag 7 Set" "Not set,Set" bitfld.long 0x00 6. "CT6,Claim Tag 6 Set" "Not set,Set" bitfld.long 0x00 5. "CT5,Claim Tag 5 Set" "Not set,Set" newline bitfld.long 0x00 4. "CT4,Claim Tag 4 Set" "Not set,Set" bitfld.long 0x00 3. "CT3,Claim Tag 3 Set" "Not set,Set" bitfld.long 0x00 2. "CT2,Claim Tag 2 Set" "Not set,Set" newline bitfld.long 0x00 1. "CT1,Claim Tag 1 Set" "Not set,Set" bitfld.long 0x00 0. "CT0,Claim Tag 0 Set" "Not set,Set" group.long c14:0x0697++0x00 line.long 0x00 "DBGCLAIMCLR,Claim Tag Clear Register" bitfld.long 0x00 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared" bitfld.long 0x00 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared" bitfld.long 0x00 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared" newline bitfld.long 0x00 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared" bitfld.long 0x00 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared" bitfld.long 0x00 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared" newline bitfld.long 0x00 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared" bitfld.long 0x00 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared" rgroup.long c14:0x06E7++0x00 line.long 0x00 "DBGAUTHSTATUS,Debug Authentication Status Register" bitfld.long 0x00 7. "SNDFI,Secure non-invasive debug features implementation" "No effect,Implemented" bitfld.long 0x00 6. "SNDE,Secure non-invasive debug enable" "Disabled,Enabled" bitfld.long 0x00 5. "SIDFI,Secure invasive debug features implementation" "No effect,Implemented" newline bitfld.long 0x00 4. "SIDE,Secure invasive debug enable" "Disabled,Enabled" bitfld.long 0x00 3. "NSNDFI,Non-secure non-invasive debug features implementation" "Not implemented,Implemented" bitfld.long 0x00 2. "NSNDE,Non-secure non-invasive debug enable" "0,1" newline bitfld.long 0x00 1. "NSIDFI,Non-secure invasive debug features implementation" "Not implemented,Implemented" bitfld.long 0x00 0. "NSIDE,Non-secure invasive debug enable" "0,1" rgroup.long c14:0x0707++0x00 line.long 0x00 "DBGDEVID2,Debug Device ID Register 2" rgroup.long c14:0x0717++0x00 line.long 0x00 "DBGDEVID1,Debug Device ID Register 1" bitfld.long 0x00 0.--3. "PCSROFFSET,This field defines the offset applied to DBGPCSR samples" "0,1,No offset,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long c14:0x0727++0x000 line.long 0x00 "DBGDEVID,Debug Device ID Register 0" bitfld.long 0x00 28.--31. "CIDMASK,Specifies the level of support for the Context ID matching breakpoint masking capability" "Not implemented,?..." bitfld.long 0x00 24.--27. "AUXREGS,Specifies support for the Debug External Auxiliary Control Register" "Not implemented,?..." bitfld.long 0x00 20.--23. "DOUBLELOCK,Specifies support for the Debug OS Double Lock Register" "Reserved,Implemented,?..." newline bitfld.long 0x00 16.--19. "VIREXTNS,Specifies whether EL2 is implemented" "Reserved,Implemented,?..." bitfld.long 0x00 12.--15. "VECTORCATCH,Defines the form of the vector catch event implemented" "Implemented,?..." bitfld.long 0x00 8.--11. "BPADDRMASK,Indicates the level of support for the Immediate Virtual Address(IVA) matching breakpoint masking capability" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented" newline bitfld.long 0x00 4.--7. "WPADDRMASK,Indicates the level of support for the DVA matching watchpoint masking capability" "Reserved,Implemented,?..." bitfld.long 0x00 0.--3. "PCSAMPLE,Indicates the level of support for Program Counter sampling using debug registers 40 and 41" "Reserved,Reserved,Reserved,Implemented,?..." tree.end newline rgroup.quad c14:0x10010++0x001 line.quad 0x00 "DBGDRAR,Debug ROM Address Register" hexmask.quad.word 0x00 32.--47. 0x1 "ROMADDR,ROM physical address" hexmask.quad.tbyte 0x00 12.--31. 0x10 "ROMADDR,ROM physical address" bitfld.quad 0x00 1. "VALID1,ROM table address valid" "Not valid,Valid" newline bitfld.quad 0x00 0. "VALID0,ROM table address valid" "Not valid,Valid" rgroup.quad c14:0x10020++0x001 line.quad 0x00 "DBGDSAR,Debug Self Address Offset Register" wgroup.long c14:0x0401++0x000 line.long 0x00 "DBGOSLAR,Operating System Lock Access Register" rgroup.long c14:0x0411++0x000 line.long 0x00 "DBGOSLSR,Operating System Lock Status Register" bitfld.long 0x00 2. "NTT,32-Bit Access" "Not required,?..." bitfld.long 0x00 1. "OSLK,Status of the OS Lock" "Not locked,Locked" bitfld.long 0x00 0. 3. "OSLM,OS Lock Model implemented Bit" "Reserved,Reserved,Implemented,?..." if (((per.l(c14:0x0411))&0x2)==0x02) group.long c14:0x0260++0x000 line.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register" else rgroup.long c14:0x0260++0x000 line.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register" endif group.long c14:0x0431++0x000 line.long 0x00 "DBGOSDLR,Debug OS Double Lock Register" bitfld.long 0x00 0. "DLK,OS Double Lock control bit" "Not locked,Locked" group.long c14:0x0441++0x000 line.long 0x00 "DBGPRCR,Device Power-Down and Reset Control Register" bitfld.long 0x00 0. "CORENPDRQ,Core No Power down Request" "Low,High" tree.end tree "Breakpoint Registers" if (((per.l(c14:0x500+0x0))&0xF00000)==(0x000000||0x100000||0x400000||0x500000)) group.long c14:(0x0400+0x0)++0x000 "Breakpoint 0" line.long 0x00 "DBGBVR0,Breakpoint Value Register" hexmask.long 0x00 2.--31. 0x04 "VA,Bits[31:2] of the address value for comparison" elif (((per.l(c14:0x500+0x0))&0xF00000)==(0x600000||0x700000||0x800000||0x900000||0xC00000||0xD00000||0xE00000||0xF00000)) rgroup.long c14:(0x0400+0x0)++0x000 "Breakpoint 0" line.long 0x00 "DBGBVR0,Breakpoint Value Register" else group.long c14:(0x0400+0x0)++0x000 "Breakpoint 0" line.long 0x00 "DBGBVR0,Breakpoint Value Register" endif if (((per.l(c14:0x0500+0x0))&0x2000)==0x2000) if (((per.l(c14:0x0500+0x0))&0xC000)==0xC000) group.long c14:(0x0500+0x0)++0x00 line.long 0x00 "DBGBCR0,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 0 is generated" "Supervisor,?..." bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0500+0x0))&0xC000)==0x8000) group.long c14:(0x0500+0x0)++0x00 line.long 0x00 "DBGBCR0,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 0 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" else group.long c14:(0x0500+0x0)++0x00 line.long 0x00 "DBGBCR0,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 0 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0500+0x0)++0x00 line.long 0x00 "DBGBCR0,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 0 is generated" "User/System,System,User,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif if (((per.l(c14:0x500+0x10))&0xF00000)==(0x000000||0x100000||0x400000||0x500000)) group.long c14:(0x0400+0x10)++0x000 "Breakpoint 1" line.long 0x00 "DBGBVR1,Breakpoint Value Register" hexmask.long 0x00 2.--31. 0x04 "VA,Bits[31:2] of the address value for comparison" elif (((per.l(c14:0x500+0x10))&0xF00000)==(0x600000||0x700000||0x800000||0x900000||0xC00000||0xD00000||0xE00000||0xF00000)) rgroup.long c14:(0x0400+0x10)++0x000 "Breakpoint 1" line.long 0x00 "DBGBVR1,Breakpoint Value Register" else group.long c14:(0x0400+0x10)++0x000 "Breakpoint 1" line.long 0x00 "DBGBVR1,Breakpoint Value Register" endif if (((per.l(c14:0x0500+0x10))&0x2000)==0x2000) if (((per.l(c14:0x0500+0x10))&0xC000)==0xC000) group.long c14:(0x0500+0x10)++0x00 line.long 0x00 "DBGBCR1,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 1 is generated" "Supervisor,?..." bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0500+0x10))&0xC000)==0x8000) group.long c14:(0x0500+0x10)++0x00 line.long 0x00 "DBGBCR1,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 1 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" else group.long c14:(0x0500+0x10)++0x00 line.long 0x00 "DBGBCR1,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 1 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0500+0x10)++0x00 line.long 0x00 "DBGBCR1,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 1 is generated" "User/System,System,User,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif if (((per.l(c14:0x500+0x20))&0xF00000)==(0x000000||0x100000||0x400000||0x500000)) group.long c14:(0x0400+0x20)++0x000 "Breakpoint 2" line.long 0x00 "DBGBVR2,Breakpoint Value Register" hexmask.long 0x00 2.--31. 0x04 "VA,Bits[31:2] of the address value for comparison" elif (((per.l(c14:0x500+0x20))&0xF00000)==(0x600000||0x700000||0x800000||0x900000||0xC00000||0xD00000||0xE00000||0xF00000)) rgroup.long c14:(0x0400+0x20)++0x000 "Breakpoint 2" line.long 0x00 "DBGBVR2,Breakpoint Value Register" else group.long c14:(0x0400+0x20)++0x000 "Breakpoint 2" line.long 0x00 "DBGBVR2,Breakpoint Value Register" endif if (((per.l(c14:0x0500+0x20))&0x2000)==0x2000) if (((per.l(c14:0x0500+0x20))&0xC000)==0xC000) group.long c14:(0x0500+0x20)++0x00 line.long 0x00 "DBGBCR2,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 2 is generated" "Supervisor,?..." bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0500+0x20))&0xC000)==0x8000) group.long c14:(0x0500+0x20)++0x00 line.long 0x00 "DBGBCR2,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 2 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" else group.long c14:(0x0500+0x20)++0x00 line.long 0x00 "DBGBCR2,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 2 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0500+0x20)++0x00 line.long 0x00 "DBGBCR2,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 2 is generated" "User/System,System,User,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif if (((per.l(c14:0x500+0x30))&0xF00000)==(0x000000||0x100000||0x400000||0x500000)) group.long c14:(0x0400+0x30)++0x000 "Breakpoint 3" line.long 0x00 "DBGBVR3,Breakpoint Value Register" hexmask.long 0x00 2.--31. 0x04 "VA,Bits[31:2] of the address value for comparison" elif (((per.l(c14:0x500+0x30))&0xF00000)==(0x600000||0x700000||0x800000||0x900000||0xC00000||0xD00000||0xE00000||0xF00000)) rgroup.long c14:(0x0400+0x30)++0x000 "Breakpoint 3" line.long 0x00 "DBGBVR3,Breakpoint Value Register" else group.long c14:(0x0400+0x30)++0x000 "Breakpoint 3" line.long 0x00 "DBGBVR3,Breakpoint Value Register" endif if (((per.l(c14:0x0500+0x30))&0x2000)==0x2000) if (((per.l(c14:0x0500+0x30))&0xC000)==0xC000) group.long c14:(0x0500+0x30)++0x00 line.long 0x00 "DBGBCR3,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 3 is generated" "Supervisor,?..." bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0500+0x30))&0xC000)==0x8000) group.long c14:(0x0500+0x30)++0x00 line.long 0x00 "DBGBCR3,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 3 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" else group.long c14:(0x0500+0x30)++0x00 line.long 0x00 "DBGBCR3,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 3 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0500+0x30)++0x00 line.long 0x00 "DBGBCR3,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 3 is generated" "User/System,System,User,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif if (((per.l(c14:0x500+0x40))&0xF00000)==(0x000000||0x100000||0x400000||0x500000)) group.long c14:(0x0400+0x40)++0x000 "Breakpoint 4" line.long 0x00 "DBGBVR4,Breakpoint Value Register" hexmask.long 0x00 2.--31. 0x04 "VA,Bits[31:2] of the address value for comparison" elif (((per.l(c14:0x500+0x40))&0xF00000)==(0x600000||0x700000||0x800000||0x900000||0xC00000||0xD00000||0xE00000||0xF00000)) rgroup.long c14:(0x0400+0x40)++0x000 "Breakpoint 4" line.long 0x00 "DBGBVR4,Breakpoint Value Register" else group.long c14:(0x0400+0x40)++0x000 "Breakpoint 4" line.long 0x00 "DBGBVR4,Breakpoint Value Register" endif if (((per.l(c14:0x0500+0x40))&0x2000)==0x2000) if (((per.l(c14:0x0500+0x40))&0xC000)==0xC000) group.long c14:(0x0500+0x40)++0x00 line.long 0x00 "DBGBCR4,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 4 is generated" "Supervisor,?..." bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0500+0x40))&0xC000)==0x8000) group.long c14:(0x0500+0x40)++0x00 line.long 0x00 "DBGBCR4,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 4 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" else group.long c14:(0x0500+0x40)++0x00 line.long 0x00 "DBGBCR4,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 4 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0500+0x40)++0x00 line.long 0x00 "DBGBCR4,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 4 is generated" "User/System,System,User,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif if (((per.l(c14:0x500+0x50))&0xF00000)==(0x000000||0x100000||0x400000||0x500000)) group.long c14:(0x0400+0x50)++0x000 "Breakpoint 5" line.long 0x00 "DBGBVR5,Breakpoint Value Register" hexmask.long 0x00 2.--31. 0x04 "VA,Bits[31:2] of the address value for comparison" elif (((per.l(c14:0x500+0x50))&0xF00000)==(0x600000||0x700000||0x800000||0x900000||0xC00000||0xD00000||0xE00000||0xF00000)) rgroup.long c14:(0x0400+0x50)++0x000 "Breakpoint 5" line.long 0x00 "DBGBVR5,Breakpoint Value Register" else group.long c14:(0x0400+0x50)++0x000 "Breakpoint 5" line.long 0x00 "DBGBVR5,Breakpoint Value Register" endif if (((per.l(c14:0x0500+0x50))&0x2000)==0x2000) if (((per.l(c14:0x0500+0x50))&0xC000)==0xC000) group.long c14:(0x0500+0x50)++0x00 line.long 0x00 "DBGBCR5,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 5 is generated" "Supervisor,?..." bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0500+0x50))&0xC000)==0x8000) group.long c14:(0x0500+0x50)++0x00 line.long 0x00 "DBGBCR5,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 5 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" else group.long c14:(0x0500+0x50)++0x00 line.long 0x00 "DBGBCR5,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 5 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0500+0x50)++0x00 line.long 0x00 "DBGBCR5,Breakpoint Control Register" bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch" bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID" bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled" newline bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Higher mode control" "Disabled,Enabled" newline bitfld.long 0x00 5.--8. "BAS,Byte 3 address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111" bitfld.long 0x00 1.--2. "PMC,Determines the Exception level or levels at which a breakpoint debug event for breakpoint 5 is generated" "User/System,System,User,User/System" bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled" endif group.long c14:0x0141++0x00 line.long 0x00 "DBGBXVR4,Debug Breakpoint Extended Value Register 4" hexmask.long.byte 0x00 0.--7. 1. "VMID,VMID value" group.long c14:0x0151++0x00 line.long 0x00 "DBGBXVR5,Debug Breakpoint Extended Value Register 5" hexmask.long.byte 0x00 0.--7. 1. "VMID,VMID value" tree.end tree "Watchpoint Control Registers" group.long c14:(0x0600+0x0)++0x000 "Watchpoint 0" line.long 0x00 "DBGWVR0,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "DA,Data address" if (((per.l(c14:0x0700+0x0))&0x2000)==0x2000) if (((per.l(c14:0x0700+0x0))&0xC000)==0xC000) group.long c14:(0x0700+0x0)++0x000 line.long 0x00 "DBGWCR0,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 0 is generated" "Supervisor,?..." bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0700+0x0))&0x8000)==0x8000) group.long c14:(0x0700+0x0)++0x000 line.long 0x00 "DBGWCR0,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 0 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" else group.long c14:(0x0700+0x0)++0x000 line.long 0x00 "DBGWCR0,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 0 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0700+0x0)++0x000 line.long 0x00 "DBGWCR0,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 0 is generated" "Reserved,System,User,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif group.long c14:(0x0600+0x10)++0x000 "Watchpoint 1" line.long 0x00 "DBGWVR1,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "DA,Data address" if (((per.l(c14:0x0700+0x10))&0x2000)==0x2000) if (((per.l(c14:0x0700+0x10))&0xC000)==0xC000) group.long c14:(0x0700+0x10)++0x000 line.long 0x00 "DBGWCR1,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 1 is generated" "Supervisor,?..." bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0700+0x10))&0x8000)==0x8000) group.long c14:(0x0700+0x10)++0x000 line.long 0x00 "DBGWCR1,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 1 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" else group.long c14:(0x0700+0x10)++0x000 line.long 0x00 "DBGWCR1,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 1 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0700+0x10)++0x000 line.long 0x00 "DBGWCR1,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 1 is generated" "Reserved,System,User,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif group.long c14:(0x0600+0x20)++0x000 "Watchpoint 2" line.long 0x00 "DBGWVR2,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "DA,Data address" if (((per.l(c14:0x0700+0x20))&0x2000)==0x2000) if (((per.l(c14:0x0700+0x20))&0xC000)==0xC000) group.long c14:(0x0700+0x20)++0x000 line.long 0x00 "DBGWCR2,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 2 is generated" "Supervisor,?..." bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0700+0x20))&0x8000)==0x8000) group.long c14:(0x0700+0x20)++0x000 line.long 0x00 "DBGWCR2,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 2 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" else group.long c14:(0x0700+0x20)++0x000 line.long 0x00 "DBGWCR2,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 2 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0700+0x20)++0x000 line.long 0x00 "DBGWCR2,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 2 is generated" "Reserved,System,User,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif group.long c14:(0x0600+0x30)++0x000 "Watchpoint 3" line.long 0x00 "DBGWVR3,Watchpoint Value Register" hexmask.long 0x00 2.--31. 0x4 "DA,Data address" if (((per.l(c14:0x0700+0x30))&0x2000)==0x2000) if (((per.l(c14:0x0700+0x30))&0xC000)==0xC000) group.long c14:(0x0700+0x30)++0x000 line.long 0x00 "DBGWCR3,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 3 is generated" "Supervisor,?..." bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" elif (((per.l(c14:0x0700+0x30))&0x8000)==0x8000) group.long c14:(0x0700+0x30)++0x000 line.long 0x00 "DBGWCR3,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 3 is generated" "Reserved,System,Reserved,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" else group.long c14:(0x0700+0x30)++0x000 line.long 0x00 "DBGWCR3,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,Non-secure" bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 3 is generated" "Reserved,System/Supervisor,Reserved,User/System/Supervisor" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif else group.long c14:(0x0700+0x30)++0x000 line.long 0x00 "DBGWCR3,Watchpoint Control Register" bitfld.long 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20. "WT,Watchpoint Type" "Unlinked data address match,Linked data address match" bitfld.long 0x00 16.--19. "LBN,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" newline bitfld.long 0x00 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..." bitfld.long 0x00 13. "HMC,Hypervisor Mode Control" "Disabled,Enabled" hexmask.long.byte 0x00 5.--12. 0x01 "BAS,Byte address select" newline bitfld.long 0x00 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x00 1.--2. "PAC,Determines the Exception level or levels at which a watchpoint debug event for watchpoint 3 is generated" "Reserved,System,User,User/System" bitfld.long 0x00 0. "WE,Watchpoint enable" "Disabled,Enabled" endif tree.end tree.end AUTOINDENT.OFF tree.open "Interrupt Controller (GIC-500)" base COMP.BASE("GICD",-1.) width 17. tree "Distributor Interface" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.))) group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Secure access)" rbitfld.long 0x00 31. " RWP ,Register Write Pending. Indicates whether a register write is in progress or not" "Not pending,Pending" bitfld.long 0x00 7. " E1NWF ,Enable 1 of N Wakeup Functionality" "Disabled,Enabled" bitfld.long 0x00 6. " DS ,Disable Security" "No,Yes" textline " " bitfld.long 0x00 5. " ARE_NS ,Affinity Routing Enable" "Disabled,Enabled" bitfld.long 0x00 4. " ARE_S ,Affinity Routing Enable" "Disabled,Enabled" bitfld.long 0x00 2. " ENABLEGRP1S ,Enable Secure Group 1 interrupts" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " ENABLEGRP1NS ,Enable Secure Group 1 interrupts" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Enable Group 0 interrupts" "Disabled,Enabled" elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400) group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Non-secure access)" rbitfld.long 0x00 31. " RWP ,Register Write Pending. Indicates whether a register write is in progress or not" "Not pending,Pending" bitfld.long 0x00 7. " E1NWF ,Enable 1 of N Wakeup Functionality" "Disabled,Enabled" bitfld.long 0x00 4. " ARE_NS ,Affinity Routing Enable" "Reserved,Enabled" textline " " bitfld.long 0x00 1. " ENABLEGRP1A ,Enable Group 1 interrupts" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP1 ,Enable Group 1 interrupts" "Disabled,Enabled" else group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register" rbitfld.long 0x00 31. " RWP ,Register Write Pending. Indicates whether a register write is in progress or not" "Not pending,Pending" bitfld.long 0x00 7. " E1NWF ,Enable 1 of N Wakeup Functionality" "Disabled,Enabled" rbitfld.long 0x00 6. " DS ,Disable Security" "Reserved,Yes" textline " " bitfld.long 0x00 4. " ARE ,Affinity Routing Enable" "Reserved,Enabled" bitfld.long 0x00 1. " ENABLEGRP1 ,Enable Group 1 interrupts" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Enable Group 0 interrupts" "Disabled,Enabled" endif rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 25. " NO1N ,Indicates whether 1 of N SPI interrupts are supported" "Supported,Not supported" bitfld.long 0x00 24. " A3V ,Indicates whether the Distributor supports nonzero values of Affinity level 3" "Not supported,Supported" bitfld.long 0x00 19.--23. " IDBITS ,The number of interrupt identifier bits supported" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..." textline " " bitfld.long 0x00 17. " LPIS ,Indicates whether the implementation supports LPIs" "Not supported,Supported" bitfld.long 0x00 16. " MBIS ,Indicates whether the implementation supports message-based interrupts by writing to Distributor registers" "Not supported,Supported" bitfld.long 0x00 10. " SECURITYEXTN ,Indicates whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Reports the number of PEs that can be used when affinity routing is not enabled" "1,2,3,4,5,6,7,8" bitfld.long 0x00 0.--4. " ITLN ,Indicates the maximum SPI INTID that the GIC implementation supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Reserved" rgroup.long 0x0008++0x03 line.long 0x00 "GICD_IIDR,Distributor Implementer Identification Register" bitfld.long 0x00 24.--31. " PRODID ,Indicates the product ID" "GIC-500,?..." bitfld.long 0x00 16.--19. " VAR ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " REV ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x10000)==0x10000) wgroup.long 0x40++0x03 line.long 0x00 "GICD_SETSPI_NSR,Non-secure SPI Set Register" hexmask.long.word 0x00 0.--9. 1. " INTID ,The INTID of the SPI" wgroup.long 0x48++0x03 line.long 0x00 "GICD_CLRSPI_NSR,Non-secure SPI Clear Register" hexmask.long.word 0x00 0.--9. 1. " INTID ,The INTID of the SPI" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x50)) wgroup.long 0x50++0x03 line.long 0x00 "GICD_SETSPI_SR,Secure SPI Set Register (Secure access)" hexmask.long.word 0x00 0.--9. 1. " INTID ,The INTID of the SPI" else hgroup.long 0x50++0x03 hide.long 0x00 "GICD_SETSPI_SR,Secure SPI Set Register (Non-secure access)" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x58)) wgroup.long 0x58++0x03 line.long 0x00 "GICD_CLRSPI_SR,Secure SPI Clear Register (Secure access)" hexmask.long.word 0x00 0.--9. 1. " INTID ,The INTID of the SPI" else hgroup.long 0x58++0x03 hide.long 0x00 "GICD_CLRSPI_SR,Secure SPI Clear Register (Non-secure access)" endif else hgroup.long 0x40++0x03 hide.long 0x00 "GICD_SETSPI_NSR,Non-secure SPI Set Register" hgroup.long 0x48++0x03 hide.long 0x00 "GICD_CLRSPI_NSR,Non-secure SPI Clear Register" hgroup.long 0x50++0x03 hide.long 0x00 "GICD_SETSPI_SR,Secure SPI Set Register" hgroup.long 0x58++0x03 hide.long 0x00 "GICD_CLRSPI_SR,Secure SPI Clear Register" endif width 17. tree "Group Registers" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0080)) group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Secure Access)" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Secure,Non-secure Group 1" elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00) group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0,Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0,Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0,Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0,Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0,Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0,Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0,Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0,Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0,Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0,Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0,Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0,Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0,Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0,Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0,Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0,Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0,Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0,Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0,Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0,Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0,Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0,Group 1" else hgroup.long 0x0080++0x03 hide.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Non-secure access)" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x84))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1)) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1 ,Interrupt Group Register 1 (Secure Access)" bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1)) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1 ,Interrupt Group Register 1 " bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Group 0,Group 1" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Group 0,Group 1" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Group 0,Group 1" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Group 0,Group 1" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Group 0,Group 1" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Group 0,Group 1" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Group 0,Group 1" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Group 0,Group 1" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Group 0,Group 1" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Group 0,Group 1" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Group 0,Group 1" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Group 0,Group 1" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Group 0,Group 1" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Group 0,Group 1" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Group 0,Group 1" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Group 0,Group 1" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Group 0,Group 1" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Group 0,Group 1" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Group 0,Group 1" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Group 0,Group 1" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Group 0,Group 1" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Group 0,Group 1" else hgroup.long 0x0084++0x03 hide.long 0x0 "GICD_IGROUPR1 ,Interrupt Group Register 1 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x88))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x2)) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2 ,Interrupt Group Register 2 (Secure Access)" bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x2)) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2 ,Interrupt Group Register 2 " bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Group 0,Group 1" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Group 0,Group 1" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Group 0,Group 1" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Group 0,Group 1" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Group 0,Group 1" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Group 0,Group 1" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Group 0,Group 1" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Group 0,Group 1" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Group 0,Group 1" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Group 0,Group 1" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Group 0,Group 1" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Group 0,Group 1" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Group 0,Group 1" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Group 0,Group 1" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Group 0,Group 1" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Group 0,Group 1" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Group 0,Group 1" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Group 0,Group 1" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Group 0,Group 1" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Group 0,Group 1" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Group 0,Group 1" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Group 0,Group 1" else hgroup.long 0x0088++0x03 hide.long 0x0 "GICD_IGROUPR2 ,Interrupt Group Register 2 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x8C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x3)) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3 ,Interrupt Group Register 3 (Secure Access)" bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x3)) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3 ,Interrupt Group Register 3 " bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0,Group 1" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Group 0,Group 1" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0,Group 1" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Group 0,Group 1" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0,Group 1" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Group 0,Group 1" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0,Group 1" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Group 0,Group 1" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0,Group 1" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Group 0,Group 1" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0,Group 1" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Group 0,Group 1" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0,Group 1" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Group 0,Group 1" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0,Group 1" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Group 0,Group 1" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0,Group 1" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Group 0,Group 1" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0,Group 1" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Group 0,Group 1" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Group 0,Group 1" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Group 0,Group 1" else hgroup.long 0x008C++0x03 hide.long 0x0 "GICD_IGROUPR3 ,Interrupt Group Register 3 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x90))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x4)) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4 ,Interrupt Group Register 4 (Secure Access)" bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x4)) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4 ,Interrupt Group Register 4 " bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0,Group 1" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Group 0,Group 1" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0,Group 1" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Group 0,Group 1" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0,Group 1" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Group 0,Group 1" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0,Group 1" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Group 0,Group 1" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0,Group 1" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Group 0,Group 1" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0,Group 1" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Group 0,Group 1" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0,Group 1" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Group 0,Group 1" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0,Group 1" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Group 0,Group 1" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0,Group 1" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Group 0,Group 1" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0,Group 1" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Group 0,Group 1" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0,Group 1" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Group 0,Group 1" else hgroup.long 0x0090++0x03 hide.long 0x0 "GICD_IGROUPR4 ,Interrupt Group Register 4 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x94))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x5)) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5 ,Interrupt Group Register 5 (Secure Access)" bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x5)) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5 ,Interrupt Group Register 5 " bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0,Group 1" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Group 0,Group 1" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0,Group 1" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Group 0,Group 1" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0,Group 1" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Group 0,Group 1" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0,Group 1" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Group 0,Group 1" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0,Group 1" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Group 0,Group 1" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0,Group 1" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Group 0,Group 1" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0,Group 1" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Group 0,Group 1" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0,Group 1" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Group 0,Group 1" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0,Group 1" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Group 0,Group 1" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0,Group 1" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Group 0,Group 1" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0,Group 1" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Group 0,Group 1" else hgroup.long 0x0094++0x03 hide.long 0x0 "GICD_IGROUPR5 ,Interrupt Group Register 5 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x98))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x6)) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6 ,Interrupt Group Register 6 (Secure Access)" bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x6)) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6 ,Interrupt Group Register 6 " bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0,Group 1" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Group 0,Group 1" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0,Group 1" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Group 0,Group 1" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0,Group 1" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Group 0,Group 1" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0,Group 1" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Group 0,Group 1" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0,Group 1" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Group 0,Group 1" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0,Group 1" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Group 0,Group 1" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0,Group 1" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Group 0,Group 1" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0,Group 1" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Group 0,Group 1" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0,Group 1" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Group 0,Group 1" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0,Group 1" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Group 0,Group 1" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0,Group 1" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Group 0,Group 1" else hgroup.long 0x0098++0x03 hide.long 0x0 "GICD_IGROUPR6 ,Interrupt Group Register 6 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x9C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x7)) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7 ,Interrupt Group Register 7 (Secure Access)" bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x7)) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7 ,Interrupt Group Register 7 " bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0,Group 1" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Group 0,Group 1" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0,Group 1" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Group 0,Group 1" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0,Group 1" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Group 0,Group 1" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0,Group 1" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Group 0,Group 1" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0,Group 1" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Group 0,Group 1" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0,Group 1" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Group 0,Group 1" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0,Group 1" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Group 0,Group 1" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0,Group 1" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Group 0,Group 1" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0,Group 1" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Group 0,Group 1" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0,Group 1" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Group 0,Group 1" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0,Group 1" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Group 0,Group 1" else hgroup.long 0x009C++0x03 hide.long 0x0 "GICD_IGROUPR7 ,Interrupt Group Register 7 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xA0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x8)) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8 ,Interrupt Group Register 8 (Secure Access)" bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x8)) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8 ,Interrupt Group Register 8 " bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0,Group 1" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Group 0,Group 1" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0,Group 1" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Group 0,Group 1" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0,Group 1" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Group 0,Group 1" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0,Group 1" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Group 0,Group 1" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0,Group 1" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Group 0,Group 1" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0,Group 1" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Group 0,Group 1" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0,Group 1" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Group 0,Group 1" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0,Group 1" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Group 0,Group 1" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0,Group 1" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Group 0,Group 1" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0,Group 1" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Group 0,Group 1" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0,Group 1" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Group 0,Group 1" else hgroup.long 0x00A0++0x03 hide.long 0x0 "GICD_IGROUPR8 ,Interrupt Group Register 8 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xA4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x9)) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9 ,Interrupt Group Register 9 (Secure Access)" bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x9)) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9 ,Interrupt Group Register 9 " bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0,Group 1" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Group 0,Group 1" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0,Group 1" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Group 0,Group 1" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0,Group 1" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Group 0,Group 1" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0,Group 1" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Group 0,Group 1" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0,Group 1" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Group 0,Group 1" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0,Group 1" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Group 0,Group 1" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0,Group 1" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Group 0,Group 1" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0,Group 1" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Group 0,Group 1" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0,Group 1" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Group 0,Group 1" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0,Group 1" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Group 0,Group 1" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0,Group 1" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Group 0,Group 1" else hgroup.long 0x00A4++0x03 hide.long 0x0 "GICD_IGROUPR9 ,Interrupt Group Register 9 " endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xA8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xA)) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Secure Access)" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xA)) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0,Group 1" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Group 0,Group 1" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0,Group 1" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Group 0,Group 1" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0,Group 1" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Group 0,Group 1" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0,Group 1" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Group 0,Group 1" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0,Group 1" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Group 0,Group 1" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0,Group 1" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Group 0,Group 1" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0,Group 1" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Group 0,Group 1" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0,Group 1" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Group 0,Group 1" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0,Group 1" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Group 0,Group 1" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0,Group 1" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Group 0,Group 1" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0,Group 1" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Group 0,Group 1" else hgroup.long 0x00A8++0x03 hide.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xAC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xB)) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Secure Access)" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xB)) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0,Group 1" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Group 0,Group 1" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0,Group 1" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Group 0,Group 1" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0,Group 1" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Group 0,Group 1" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0,Group 1" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Group 0,Group 1" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0,Group 1" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Group 0,Group 1" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0,Group 1" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Group 0,Group 1" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0,Group 1" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Group 0,Group 1" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0,Group 1" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Group 0,Group 1" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0,Group 1" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Group 0,Group 1" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0,Group 1" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Group 0,Group 1" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0,Group 1" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Group 0,Group 1" else hgroup.long 0x00AC++0x03 hide.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xB0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xC)) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Secure Access)" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xC)) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0,Group 1" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Group 0,Group 1" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0,Group 1" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Group 0,Group 1" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0,Group 1" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Group 0,Group 1" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0,Group 1" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Group 0,Group 1" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0,Group 1" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Group 0,Group 1" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0,Group 1" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Group 0,Group 1" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0,Group 1" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Group 0,Group 1" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0,Group 1" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Group 0,Group 1" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0,Group 1" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Group 0,Group 1" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0,Group 1" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Group 0,Group 1" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0,Group 1" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Group 0,Group 1" else hgroup.long 0x00B0++0x03 hide.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xB4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xD)) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Secure Access)" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xD)) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0,Group 1" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Group 0,Group 1" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0,Group 1" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Group 0,Group 1" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0,Group 1" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Group 0,Group 1" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0,Group 1" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Group 0,Group 1" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0,Group 1" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Group 0,Group 1" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0,Group 1" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Group 0,Group 1" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0,Group 1" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Group 0,Group 1" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0,Group 1" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Group 0,Group 1" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0,Group 1" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Group 0,Group 1" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0,Group 1" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Group 0,Group 1" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0,Group 1" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Group 0,Group 1" else hgroup.long 0x00B4++0x03 hide.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xB8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xE)) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Secure Access)" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xE)) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0,Group 1" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Group 0,Group 1" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0,Group 1" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Group 0,Group 1" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0,Group 1" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Group 0,Group 1" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0,Group 1" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Group 0,Group 1" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0,Group 1" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Group 0,Group 1" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0,Group 1" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Group 0,Group 1" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0,Group 1" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Group 0,Group 1" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0,Group 1" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Group 0,Group 1" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0,Group 1" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Group 0,Group 1" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0,Group 1" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Group 0,Group 1" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0,Group 1" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Group 0,Group 1" else hgroup.long 0x00B8++0x03 hide.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xBC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xF)) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Secure Access)" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xF)) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0,Group 1" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Group 0,Group 1" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0,Group 1" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Group 0,Group 1" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0,Group 1" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Group 0,Group 1" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0,Group 1" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Group 0,Group 1" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0,Group 1" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Group 0,Group 1" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0,Group 1" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Group 0,Group 1" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0,Group 1" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Group 0,Group 1" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0,Group 1" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Group 0,Group 1" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0,Group 1" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Group 0,Group 1" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0,Group 1" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Group 0,Group 1" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0,Group 1" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Group 0,Group 1" else hgroup.long 0x00BC++0x03 hide.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xC0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Secure Access)" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0,Group 1" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Group 0,Group 1" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0,Group 1" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Group 0,Group 1" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0,Group 1" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Group 0,Group 1" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0,Group 1" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Group 0,Group 1" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0,Group 1" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Group 0,Group 1" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0,Group 1" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Group 0,Group 1" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0,Group 1" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Group 0,Group 1" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0,Group 1" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Group 0,Group 1" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0,Group 1" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Group 0,Group 1" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0,Group 1" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Group 0,Group 1" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0,Group 1" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Group 0,Group 1" else hgroup.long 0x00C0++0x03 hide.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xC4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Secure Access)" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0,Group 1" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Group 0,Group 1" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0,Group 1" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Group 0,Group 1" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0,Group 1" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Group 0,Group 1" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0,Group 1" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Group 0,Group 1" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0,Group 1" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Group 0,Group 1" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0,Group 1" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Group 0,Group 1" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0,Group 1" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Group 0,Group 1" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0,Group 1" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Group 0,Group 1" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0,Group 1" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Group 0,Group 1" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0,Group 1" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Group 0,Group 1" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0,Group 1" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Group 0,Group 1" else hgroup.long 0x00C4++0x03 hide.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xC8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Secure Access)" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0,Group 1" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Group 0,Group 1" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0,Group 1" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Group 0,Group 1" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0,Group 1" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Group 0,Group 1" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0,Group 1" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Group 0,Group 1" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0,Group 1" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Group 0,Group 1" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0,Group 1" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Group 0,Group 1" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0,Group 1" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Group 0,Group 1" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0,Group 1" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Group 0,Group 1" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0,Group 1" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Group 0,Group 1" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0,Group 1" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Group 0,Group 1" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0,Group 1" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Group 0,Group 1" else hgroup.long 0x00C8++0x03 hide.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xCC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Secure Access)" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0,Group 1" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Group 0,Group 1" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0,Group 1" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Group 0,Group 1" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0,Group 1" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Group 0,Group 1" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0,Group 1" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Group 0,Group 1" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0,Group 1" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Group 0,Group 1" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0,Group 1" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Group 0,Group 1" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0,Group 1" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Group 0,Group 1" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0,Group 1" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Group 0,Group 1" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0,Group 1" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Group 0,Group 1" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0,Group 1" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Group 0,Group 1" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0,Group 1" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Group 0,Group 1" else hgroup.long 0x00CC++0x03 hide.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xD0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Secure Access)" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0,Group 1" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Group 0,Group 1" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0,Group 1" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Group 0,Group 1" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0,Group 1" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Group 0,Group 1" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0,Group 1" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Group 0,Group 1" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0,Group 1" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Group 0,Group 1" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0,Group 1" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Group 0,Group 1" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0,Group 1" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Group 0,Group 1" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0,Group 1" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Group 0,Group 1" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0,Group 1" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Group 0,Group 1" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0,Group 1" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Group 0,Group 1" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0,Group 1" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Group 0,Group 1" else hgroup.long 0x00D0++0x03 hide.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xD4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Secure Access)" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0,Group 1" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Group 0,Group 1" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0,Group 1" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Group 0,Group 1" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0,Group 1" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Group 0,Group 1" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0,Group 1" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Group 0,Group 1" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0,Group 1" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Group 0,Group 1" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0,Group 1" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Group 0,Group 1" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0,Group 1" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Group 0,Group 1" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0,Group 1" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Group 0,Group 1" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0,Group 1" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Group 0,Group 1" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0,Group 1" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Group 0,Group 1" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0,Group 1" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Group 0,Group 1" else hgroup.long 0x00D4++0x03 hide.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xD8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Secure Access)" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0,Group 1" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Group 0,Group 1" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0,Group 1" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Group 0,Group 1" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0,Group 1" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Group 0,Group 1" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0,Group 1" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Group 0,Group 1" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0,Group 1" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Group 0,Group 1" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0,Group 1" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Group 0,Group 1" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0,Group 1" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Group 0,Group 1" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0,Group 1" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Group 0,Group 1" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0,Group 1" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Group 0,Group 1" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0,Group 1" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Group 0,Group 1" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0,Group 1" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Group 0,Group 1" else hgroup.long 0x00D8++0x03 hide.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xDC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Secure Access)" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0,Group 1" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Group 0,Group 1" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0,Group 1" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Group 0,Group 1" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0,Group 1" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Group 0,Group 1" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0,Group 1" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Group 0,Group 1" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0,Group 1" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Group 0,Group 1" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0,Group 1" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Group 0,Group 1" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0,Group 1" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Group 0,Group 1" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0,Group 1" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Group 0,Group 1" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0,Group 1" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Group 0,Group 1" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0,Group 1" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Group 0,Group 1" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0,Group 1" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Group 0,Group 1" else hgroup.long 0x00DC++0x03 hide.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Secure Access)" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0,Group 1" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Group 0,Group 1" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0,Group 1" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Group 0,Group 1" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0,Group 1" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Group 0,Group 1" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0,Group 1" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Group 0,Group 1" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0,Group 1" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Group 0,Group 1" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0,Group 1" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Group 0,Group 1" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0,Group 1" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Group 0,Group 1" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0,Group 1" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Group 0,Group 1" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0,Group 1" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Group 0,Group 1" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0,Group 1" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Group 0,Group 1" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0,Group 1" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Group 0,Group 1" else hgroup.long 0x00E0++0x03 hide.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Secure Access)" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0,Group 1" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Group 0,Group 1" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0,Group 1" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Group 0,Group 1" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0,Group 1" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Group 0,Group 1" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0,Group 1" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Group 0,Group 1" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0,Group 1" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Group 0,Group 1" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0,Group 1" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Group 0,Group 1" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0,Group 1" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Group 0,Group 1" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0,Group 1" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Group 0,Group 1" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0,Group 1" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Group 0,Group 1" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0,Group 1" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Group 0,Group 1" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0,Group 1" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Group 0,Group 1" else hgroup.long 0x00E4++0x03 hide.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Secure Access)" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0,Group 1" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Group 0,Group 1" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0,Group 1" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Group 0,Group 1" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0,Group 1" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Group 0,Group 1" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0,Group 1" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Group 0,Group 1" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0,Group 1" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Group 0,Group 1" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0,Group 1" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Group 0,Group 1" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0,Group 1" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Group 0,Group 1" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0,Group 1" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Group 0,Group 1" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0,Group 1" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Group 0,Group 1" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0,Group 1" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Group 0,Group 1" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0,Group 1" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Group 0,Group 1" else hgroup.long 0x00E8++0x03 hide.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Secure Access)" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0,Group 1" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Group 0,Group 1" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0,Group 1" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Group 0,Group 1" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0,Group 1" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Group 0,Group 1" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0,Group 1" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Group 0,Group 1" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0,Group 1" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Group 0,Group 1" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0,Group 1" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Group 0,Group 1" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0,Group 1" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Group 0,Group 1" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0,Group 1" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Group 0,Group 1" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0,Group 1" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Group 0,Group 1" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0,Group 1" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Group 0,Group 1" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0,Group 1" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Group 0,Group 1" else hgroup.long 0x00EC++0x03 hide.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xF0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Secure Access)" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0,Group 1" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Group 0,Group 1" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0,Group 1" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Group 0,Group 1" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0,Group 1" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Group 0,Group 1" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0,Group 1" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Group 0,Group 1" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0,Group 1" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Group 0,Group 1" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0,Group 1" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Group 0,Group 1" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0,Group 1" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Group 0,Group 1" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0,Group 1" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Group 0,Group 1" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0,Group 1" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Group 0,Group 1" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0,Group 1" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Group 0,Group 1" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0,Group 1" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Group 0,Group 1" else hgroup.long 0x00F0++0x03 hide.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xF4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Secure Access)" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0,Group 1" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Group 0,Group 1" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0,Group 1" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Group 0,Group 1" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0,Group 1" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Group 0,Group 1" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0,Group 1" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Group 0,Group 1" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0,Group 1" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Group 0,Group 1" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0,Group 1" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Group 0,Group 1" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0,Group 1" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Group 0,Group 1" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0,Group 1" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Group 0,Group 1" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0,Group 1" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Group 0,Group 1" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0,Group 1" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Group 0,Group 1" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0,Group 1" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Group 0,Group 1" else hgroup.long 0x00F4++0x03 hide.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xF8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Secure Access)" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Secure,Non-secure Group 1" elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0,Group 1" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Group 0,Group 1" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0,Group 1" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Group 0,Group 1" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0,Group 1" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Group 0,Group 1" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0,Group 1" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Group 0,Group 1" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0,Group 1" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Group 0,Group 1" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0,Group 1" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Group 0,Group 1" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0,Group 1" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Group 0,Group 1" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0,Group 1" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Group 0,Group 1" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0,Group 1" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Group 0,Group 1" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0,Group 1" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Group 0,Group 1" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0,Group 1" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Group 0,Group 1" else hgroup.long 0x00F8++0x03 hide.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30" endif tree.end width 24. tree "Set/Clear Enable Registers" if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10) hgroup.long 0x0100++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0" newline newline newline newline newline newline newline newline newline newline else group.long 0x0100++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31 ,Set/Clear Enable Bit 31" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB30 ,Set/Clear Enable Bit 30" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB29 ,Set/Clear Enable Bit 29" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28 ,Set/Clear Enable Bit 28" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB27 ,Set/Clear Enable Bit 27" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB26 ,Set/Clear Enable Bit 26" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25 ,Set/Clear Enable Bit 25" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB24 ,Set/Clear Enable Bit 24" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB23 ,Set/Clear Enable Bit 23" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22 ,Set/Clear Enable Bit 22" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB21 ,Set/Clear Enable Bit 21" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB20 ,Set/Clear Enable Bit 20" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19 ,Set/Clear Enable Bit 19" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB18 ,Set/Clear Enable Bit 18" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB17 ,Set/Clear Enable Bit 17" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16 ,Set/Clear Enable Bit 16" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB15 ,Set/Clear Enable Bit 15" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB14 ,Set/Clear Enable Bit 14" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB13 ,Set/Clear Enable Bit 13" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB12 ,Set/Clear Enable Bit 12" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB11 ,Set/Clear Enable Bit 11" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB10 ,Set/Clear Enable Bit 10" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB9 ,Set/Clear Enable Bit 9" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB8 ,Set/Clear Enable Bit 8" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB7 ,Set/Clear Enable Bit 7" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB6 ,Set/Clear Enable Bit 6" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB5 ,Set/Clear Enable Bit 5" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB4 ,Set/Clear Enable Bit 4" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB3 ,Set/Clear Enable Bit 3" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB2 ,Set/Clear Enable Bit 2" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB1 ,Set/Clear Enable Bit 1" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB0 ,Set/Clear Enable Bit 0" "Disabled,Enabled" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01) group.long 0x0104++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB63 ,Set/Clear Enable Bit 63" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB62 ,Set/Clear Enable Bit 62" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB61 ,Set/Clear Enable Bit 61" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB60 ,Set/Clear Enable Bit 60" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB59 ,Set/Clear Enable Bit 59" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB58 ,Set/Clear Enable Bit 58" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB57 ,Set/Clear Enable Bit 57" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB56 ,Set/Clear Enable Bit 56" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB55 ,Set/Clear Enable Bit 55" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB54 ,Set/Clear Enable Bit 54" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB53 ,Set/Clear Enable Bit 53" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB52 ,Set/Clear Enable Bit 52" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB51 ,Set/Clear Enable Bit 51" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB50 ,Set/Clear Enable Bit 50" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB49 ,Set/Clear Enable Bit 49" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB48 ,Set/Clear Enable Bit 48" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB47 ,Set/Clear Enable Bit 47" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB46 ,Set/Clear Enable Bit 46" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB45 ,Set/Clear Enable Bit 45" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB44 ,Set/Clear Enable Bit 44" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB43 ,Set/Clear Enable Bit 43" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB42 ,Set/Clear Enable Bit 42" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB41 ,Set/Clear Enable Bit 41" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB40 ,Set/Clear Enable Bit 40" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB39 ,Set/Clear Enable Bit 39" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB38 ,Set/Clear Enable Bit 38" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB37 ,Set/Clear Enable Bit 37" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB36 ,Set/Clear Enable Bit 36" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB35 ,Set/Clear Enable Bit 35" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB34 ,Set/Clear Enable Bit 34" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB33 ,Set/Clear Enable Bit 33" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB32 ,Set/Clear Enable Bit 32" "Disabled,Enabled" else hgroup.long 0x0104++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02) group.long 0x0108++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB95 ,Set/Clear Enable Bit 95" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB94 ,Set/Clear Enable Bit 94" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB93 ,Set/Clear Enable Bit 93" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB92 ,Set/Clear Enable Bit 92" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB91 ,Set/Clear Enable Bit 91" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB90 ,Set/Clear Enable Bit 90" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB89 ,Set/Clear Enable Bit 89" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB88 ,Set/Clear Enable Bit 88" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB87 ,Set/Clear Enable Bit 87" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB86 ,Set/Clear Enable Bit 86" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB85 ,Set/Clear Enable Bit 85" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB84 ,Set/Clear Enable Bit 84" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB83 ,Set/Clear Enable Bit 83" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB82 ,Set/Clear Enable Bit 82" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB81 ,Set/Clear Enable Bit 81" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB80 ,Set/Clear Enable Bit 80" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB79 ,Set/Clear Enable Bit 79" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB78 ,Set/Clear Enable Bit 78" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB77 ,Set/Clear Enable Bit 77" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB76 ,Set/Clear Enable Bit 76" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB75 ,Set/Clear Enable Bit 75" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB74 ,Set/Clear Enable Bit 74" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB73 ,Set/Clear Enable Bit 73" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB72 ,Set/Clear Enable Bit 72" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB71 ,Set/Clear Enable Bit 71" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB70 ,Set/Clear Enable Bit 70" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB69 ,Set/Clear Enable Bit 69" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB68 ,Set/Clear Enable Bit 68" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB67 ,Set/Clear Enable Bit 67" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB66 ,Set/Clear Enable Bit 66" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB65 ,Set/Clear Enable Bit 65" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB64 ,Set/Clear Enable Bit 64" "Disabled,Enabled" else hgroup.long 0x0108++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03) group.long 0x010C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB127 ,Set/Clear Enable Bit 127" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB126 ,Set/Clear Enable Bit 126" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB125 ,Set/Clear Enable Bit 125" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB124 ,Set/Clear Enable Bit 124" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB123 ,Set/Clear Enable Bit 123" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB122 ,Set/Clear Enable Bit 122" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB121 ,Set/Clear Enable Bit 121" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB120 ,Set/Clear Enable Bit 120" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB119 ,Set/Clear Enable Bit 119" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB118 ,Set/Clear Enable Bit 118" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB117 ,Set/Clear Enable Bit 117" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB116 ,Set/Clear Enable Bit 116" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB115 ,Set/Clear Enable Bit 115" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB114 ,Set/Clear Enable Bit 114" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB113 ,Set/Clear Enable Bit 113" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB112 ,Set/Clear Enable Bit 112" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB111 ,Set/Clear Enable Bit 111" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB110 ,Set/Clear Enable Bit 110" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB109 ,Set/Clear Enable Bit 109" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB108 ,Set/Clear Enable Bit 108" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB107 ,Set/Clear Enable Bit 107" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB106 ,Set/Clear Enable Bit 106" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB105 ,Set/Clear Enable Bit 105" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB104 ,Set/Clear Enable Bit 104" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB103 ,Set/Clear Enable Bit 103" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB102 ,Set/Clear Enable Bit 102" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB101 ,Set/Clear Enable Bit 101" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB100 ,Set/Clear Enable Bit 100" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB99 ,Set/Clear Enable Bit 99" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB98 ,Set/Clear Enable Bit 98" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB97 ,Set/Clear Enable Bit 97" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB96 ,Set/Clear Enable Bit 96" "Disabled,Enabled" else hgroup.long 0x010C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04) group.long 0x0110++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB159 ,Set/Clear Enable Bit 159" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB158 ,Set/Clear Enable Bit 158" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB157 ,Set/Clear Enable Bit 157" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB156 ,Set/Clear Enable Bit 156" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB155 ,Set/Clear Enable Bit 155" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB154 ,Set/Clear Enable Bit 154" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB153 ,Set/Clear Enable Bit 153" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB152 ,Set/Clear Enable Bit 152" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB151 ,Set/Clear Enable Bit 151" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB150 ,Set/Clear Enable Bit 150" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB149 ,Set/Clear Enable Bit 149" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB148 ,Set/Clear Enable Bit 148" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB147 ,Set/Clear Enable Bit 147" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB146 ,Set/Clear Enable Bit 146" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB145 ,Set/Clear Enable Bit 145" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB144 ,Set/Clear Enable Bit 144" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB143 ,Set/Clear Enable Bit 143" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB142 ,Set/Clear Enable Bit 142" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB141 ,Set/Clear Enable Bit 141" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB140 ,Set/Clear Enable Bit 140" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB139 ,Set/Clear Enable Bit 139" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB138 ,Set/Clear Enable Bit 138" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB137 ,Set/Clear Enable Bit 137" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB136 ,Set/Clear Enable Bit 136" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB135 ,Set/Clear Enable Bit 135" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB134 ,Set/Clear Enable Bit 134" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB133 ,Set/Clear Enable Bit 133" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB132 ,Set/Clear Enable Bit 132" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB131 ,Set/Clear Enable Bit 131" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB130 ,Set/Clear Enable Bit 130" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB129 ,Set/Clear Enable Bit 129" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB128 ,Set/Clear Enable Bit 128" "Disabled,Enabled" else hgroup.long 0x0110++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05) group.long 0x0114++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB191 ,Set/Clear Enable Bit 191" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB190 ,Set/Clear Enable Bit 190" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB189 ,Set/Clear Enable Bit 189" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB188 ,Set/Clear Enable Bit 188" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB187 ,Set/Clear Enable Bit 187" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB186 ,Set/Clear Enable Bit 186" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB185 ,Set/Clear Enable Bit 185" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB184 ,Set/Clear Enable Bit 184" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB183 ,Set/Clear Enable Bit 183" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB182 ,Set/Clear Enable Bit 182" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB181 ,Set/Clear Enable Bit 181" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB180 ,Set/Clear Enable Bit 180" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB179 ,Set/Clear Enable Bit 179" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB178 ,Set/Clear Enable Bit 178" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB177 ,Set/Clear Enable Bit 177" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB176 ,Set/Clear Enable Bit 176" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB175 ,Set/Clear Enable Bit 175" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB174 ,Set/Clear Enable Bit 174" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB173 ,Set/Clear Enable Bit 173" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB172 ,Set/Clear Enable Bit 172" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB171 ,Set/Clear Enable Bit 171" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB170 ,Set/Clear Enable Bit 170" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB169 ,Set/Clear Enable Bit 169" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB168 ,Set/Clear Enable Bit 168" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB167 ,Set/Clear Enable Bit 167" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB166 ,Set/Clear Enable Bit 166" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB165 ,Set/Clear Enable Bit 165" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB164 ,Set/Clear Enable Bit 164" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB163 ,Set/Clear Enable Bit 163" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB162 ,Set/Clear Enable Bit 162" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB161 ,Set/Clear Enable Bit 161" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB160 ,Set/Clear Enable Bit 160" "Disabled,Enabled" else hgroup.long 0x0114++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06) group.long 0x0118++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB223 ,Set/Clear Enable Bit 223" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB222 ,Set/Clear Enable Bit 222" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB221 ,Set/Clear Enable Bit 221" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB220 ,Set/Clear Enable Bit 220" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB219 ,Set/Clear Enable Bit 219" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB218 ,Set/Clear Enable Bit 218" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB217 ,Set/Clear Enable Bit 217" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB216 ,Set/Clear Enable Bit 216" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB215 ,Set/Clear Enable Bit 215" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB214 ,Set/Clear Enable Bit 214" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB213 ,Set/Clear Enable Bit 213" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB212 ,Set/Clear Enable Bit 212" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB211 ,Set/Clear Enable Bit 211" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB210 ,Set/Clear Enable Bit 210" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB209 ,Set/Clear Enable Bit 209" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB208 ,Set/Clear Enable Bit 208" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB207 ,Set/Clear Enable Bit 207" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB206 ,Set/Clear Enable Bit 206" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB205 ,Set/Clear Enable Bit 205" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB204 ,Set/Clear Enable Bit 204" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB203 ,Set/Clear Enable Bit 203" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB202 ,Set/Clear Enable Bit 202" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB201 ,Set/Clear Enable Bit 201" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB200 ,Set/Clear Enable Bit 200" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB199 ,Set/Clear Enable Bit 199" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB198 ,Set/Clear Enable Bit 198" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB197 ,Set/Clear Enable Bit 197" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB196 ,Set/Clear Enable Bit 196" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB195 ,Set/Clear Enable Bit 195" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB194 ,Set/Clear Enable Bit 194" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB193 ,Set/Clear Enable Bit 193" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB192 ,Set/Clear Enable Bit 192" "Disabled,Enabled" else hgroup.long 0x0118++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07) group.long 0x011C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB255 ,Set/Clear Enable Bit 255" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB254 ,Set/Clear Enable Bit 254" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB253 ,Set/Clear Enable Bit 253" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB252 ,Set/Clear Enable Bit 252" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB251 ,Set/Clear Enable Bit 251" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB250 ,Set/Clear Enable Bit 250" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB249 ,Set/Clear Enable Bit 249" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB248 ,Set/Clear Enable Bit 248" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB247 ,Set/Clear Enable Bit 247" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB246 ,Set/Clear Enable Bit 246" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB245 ,Set/Clear Enable Bit 245" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB244 ,Set/Clear Enable Bit 244" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB243 ,Set/Clear Enable Bit 243" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB242 ,Set/Clear Enable Bit 242" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB241 ,Set/Clear Enable Bit 241" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB240 ,Set/Clear Enable Bit 240" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB239 ,Set/Clear Enable Bit 239" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB238 ,Set/Clear Enable Bit 238" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB237 ,Set/Clear Enable Bit 237" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB236 ,Set/Clear Enable Bit 236" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB235 ,Set/Clear Enable Bit 235" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB234 ,Set/Clear Enable Bit 234" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB233 ,Set/Clear Enable Bit 233" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB232 ,Set/Clear Enable Bit 232" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB231 ,Set/Clear Enable Bit 231" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB230 ,Set/Clear Enable Bit 230" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB229 ,Set/Clear Enable Bit 229" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB228 ,Set/Clear Enable Bit 228" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB227 ,Set/Clear Enable Bit 227" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB226 ,Set/Clear Enable Bit 226" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB225 ,Set/Clear Enable Bit 225" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB224 ,Set/Clear Enable Bit 224" "Disabled,Enabled" else hgroup.long 0x011C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08) group.long 0x0120++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB287 ,Set/Clear Enable Bit 287" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB286 ,Set/Clear Enable Bit 286" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB285 ,Set/Clear Enable Bit 285" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB284 ,Set/Clear Enable Bit 284" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB283 ,Set/Clear Enable Bit 283" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB282 ,Set/Clear Enable Bit 282" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB281 ,Set/Clear Enable Bit 281" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB280 ,Set/Clear Enable Bit 280" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB279 ,Set/Clear Enable Bit 279" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB278 ,Set/Clear Enable Bit 278" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB277 ,Set/Clear Enable Bit 277" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB276 ,Set/Clear Enable Bit 276" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB275 ,Set/Clear Enable Bit 275" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB274 ,Set/Clear Enable Bit 274" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB273 ,Set/Clear Enable Bit 273" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB272 ,Set/Clear Enable Bit 272" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB271 ,Set/Clear Enable Bit 271" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB270 ,Set/Clear Enable Bit 270" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB269 ,Set/Clear Enable Bit 269" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB268 ,Set/Clear Enable Bit 268" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB267 ,Set/Clear Enable Bit 267" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB266 ,Set/Clear Enable Bit 266" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB265 ,Set/Clear Enable Bit 265" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB264 ,Set/Clear Enable Bit 264" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB263 ,Set/Clear Enable Bit 263" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB262 ,Set/Clear Enable Bit 262" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB261 ,Set/Clear Enable Bit 261" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB260 ,Set/Clear Enable Bit 260" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB259 ,Set/Clear Enable Bit 259" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB258 ,Set/Clear Enable Bit 258" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB257 ,Set/Clear Enable Bit 257" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB256 ,Set/Clear Enable Bit 256" "Disabled,Enabled" else hgroup.long 0x0120++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09) group.long 0x0124++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB319 ,Set/Clear Enable Bit 319" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB318 ,Set/Clear Enable Bit 318" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB317 ,Set/Clear Enable Bit 317" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB316 ,Set/Clear Enable Bit 316" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB315 ,Set/Clear Enable Bit 315" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB314 ,Set/Clear Enable Bit 314" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB313 ,Set/Clear Enable Bit 313" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB312 ,Set/Clear Enable Bit 312" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB311 ,Set/Clear Enable Bit 311" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB310 ,Set/Clear Enable Bit 310" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB309 ,Set/Clear Enable Bit 309" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB308 ,Set/Clear Enable Bit 308" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB307 ,Set/Clear Enable Bit 307" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB306 ,Set/Clear Enable Bit 306" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB305 ,Set/Clear Enable Bit 305" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB304 ,Set/Clear Enable Bit 304" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB303 ,Set/Clear Enable Bit 303" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB302 ,Set/Clear Enable Bit 302" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB301 ,Set/Clear Enable Bit 301" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB300 ,Set/Clear Enable Bit 300" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB299 ,Set/Clear Enable Bit 299" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB298 ,Set/Clear Enable Bit 298" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB297 ,Set/Clear Enable Bit 297" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB296 ,Set/Clear Enable Bit 296" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB295 ,Set/Clear Enable Bit 295" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB294 ,Set/Clear Enable Bit 294" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB293 ,Set/Clear Enable Bit 293" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB292 ,Set/Clear Enable Bit 292" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB291 ,Set/Clear Enable Bit 291" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB290 ,Set/Clear Enable Bit 290" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB289 ,Set/Clear Enable Bit 289" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB288 ,Set/Clear Enable Bit 288" "Disabled,Enabled" else hgroup.long 0x0124++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A) group.long 0x0128++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB351 ,Set/Clear Enable Bit 351" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB350 ,Set/Clear Enable Bit 350" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB349 ,Set/Clear Enable Bit 349" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB348 ,Set/Clear Enable Bit 348" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB347 ,Set/Clear Enable Bit 347" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB346 ,Set/Clear Enable Bit 346" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB345 ,Set/Clear Enable Bit 345" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB344 ,Set/Clear Enable Bit 344" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB343 ,Set/Clear Enable Bit 343" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB342 ,Set/Clear Enable Bit 342" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB341 ,Set/Clear Enable Bit 341" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB340 ,Set/Clear Enable Bit 340" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB339 ,Set/Clear Enable Bit 339" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB338 ,Set/Clear Enable Bit 338" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB337 ,Set/Clear Enable Bit 337" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB336 ,Set/Clear Enable Bit 336" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB335 ,Set/Clear Enable Bit 335" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB334 ,Set/Clear Enable Bit 334" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB333 ,Set/Clear Enable Bit 333" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB332 ,Set/Clear Enable Bit 332" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB331 ,Set/Clear Enable Bit 331" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB330 ,Set/Clear Enable Bit 330" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB329 ,Set/Clear Enable Bit 329" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB328 ,Set/Clear Enable Bit 328" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB327 ,Set/Clear Enable Bit 327" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB326 ,Set/Clear Enable Bit 326" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB325 ,Set/Clear Enable Bit 325" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB324 ,Set/Clear Enable Bit 324" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB323 ,Set/Clear Enable Bit 323" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB322 ,Set/Clear Enable Bit 322" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB321 ,Set/Clear Enable Bit 321" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB320 ,Set/Clear Enable Bit 320" "Disabled,Enabled" else hgroup.long 0x0128++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B) group.long 0x012C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB383 ,Set/Clear Enable Bit 383" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB382 ,Set/Clear Enable Bit 382" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB381 ,Set/Clear Enable Bit 381" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB380 ,Set/Clear Enable Bit 380" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB379 ,Set/Clear Enable Bit 379" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB378 ,Set/Clear Enable Bit 378" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB377 ,Set/Clear Enable Bit 377" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB376 ,Set/Clear Enable Bit 376" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB375 ,Set/Clear Enable Bit 375" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB374 ,Set/Clear Enable Bit 374" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB373 ,Set/Clear Enable Bit 373" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB372 ,Set/Clear Enable Bit 372" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB371 ,Set/Clear Enable Bit 371" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB370 ,Set/Clear Enable Bit 370" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB369 ,Set/Clear Enable Bit 369" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB368 ,Set/Clear Enable Bit 368" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB367 ,Set/Clear Enable Bit 367" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB366 ,Set/Clear Enable Bit 366" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB365 ,Set/Clear Enable Bit 365" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB364 ,Set/Clear Enable Bit 364" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB363 ,Set/Clear Enable Bit 363" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB362 ,Set/Clear Enable Bit 362" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB361 ,Set/Clear Enable Bit 361" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB360 ,Set/Clear Enable Bit 360" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB359 ,Set/Clear Enable Bit 359" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB358 ,Set/Clear Enable Bit 358" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB357 ,Set/Clear Enable Bit 357" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB356 ,Set/Clear Enable Bit 356" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB355 ,Set/Clear Enable Bit 355" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB354 ,Set/Clear Enable Bit 354" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB353 ,Set/Clear Enable Bit 353" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB352 ,Set/Clear Enable Bit 352" "Disabled,Enabled" else hgroup.long 0x012C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C) group.long 0x0130++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB415 ,Set/Clear Enable Bit 415" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB414 ,Set/Clear Enable Bit 414" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB413 ,Set/Clear Enable Bit 413" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB412 ,Set/Clear Enable Bit 412" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB411 ,Set/Clear Enable Bit 411" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB410 ,Set/Clear Enable Bit 410" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB409 ,Set/Clear Enable Bit 409" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB408 ,Set/Clear Enable Bit 408" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB407 ,Set/Clear Enable Bit 407" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB406 ,Set/Clear Enable Bit 406" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB405 ,Set/Clear Enable Bit 405" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB404 ,Set/Clear Enable Bit 404" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB403 ,Set/Clear Enable Bit 403" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB402 ,Set/Clear Enable Bit 402" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB401 ,Set/Clear Enable Bit 401" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB400 ,Set/Clear Enable Bit 400" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB399 ,Set/Clear Enable Bit 399" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB398 ,Set/Clear Enable Bit 398" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB397 ,Set/Clear Enable Bit 397" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB396 ,Set/Clear Enable Bit 396" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB395 ,Set/Clear Enable Bit 395" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB394 ,Set/Clear Enable Bit 394" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB393 ,Set/Clear Enable Bit 393" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB392 ,Set/Clear Enable Bit 392" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB391 ,Set/Clear Enable Bit 391" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB390 ,Set/Clear Enable Bit 390" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB389 ,Set/Clear Enable Bit 389" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB388 ,Set/Clear Enable Bit 388" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB387 ,Set/Clear Enable Bit 387" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB386 ,Set/Clear Enable Bit 386" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB385 ,Set/Clear Enable Bit 385" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB384 ,Set/Clear Enable Bit 384" "Disabled,Enabled" else hgroup.long 0x0130++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D) group.long 0x0134++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB447 ,Set/Clear Enable Bit 447" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB446 ,Set/Clear Enable Bit 446" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB445 ,Set/Clear Enable Bit 445" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB444 ,Set/Clear Enable Bit 444" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB443 ,Set/Clear Enable Bit 443" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB442 ,Set/Clear Enable Bit 442" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB441 ,Set/Clear Enable Bit 441" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB440 ,Set/Clear Enable Bit 440" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB439 ,Set/Clear Enable Bit 439" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB438 ,Set/Clear Enable Bit 438" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB437 ,Set/Clear Enable Bit 437" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB436 ,Set/Clear Enable Bit 436" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB435 ,Set/Clear Enable Bit 435" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB434 ,Set/Clear Enable Bit 434" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB433 ,Set/Clear Enable Bit 433" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB432 ,Set/Clear Enable Bit 432" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB431 ,Set/Clear Enable Bit 431" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB430 ,Set/Clear Enable Bit 430" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB429 ,Set/Clear Enable Bit 429" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB428 ,Set/Clear Enable Bit 428" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB427 ,Set/Clear Enable Bit 427" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB426 ,Set/Clear Enable Bit 426" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB425 ,Set/Clear Enable Bit 425" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB424 ,Set/Clear Enable Bit 424" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB423 ,Set/Clear Enable Bit 423" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB422 ,Set/Clear Enable Bit 422" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB421 ,Set/Clear Enable Bit 421" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB420 ,Set/Clear Enable Bit 420" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB419 ,Set/Clear Enable Bit 419" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB418 ,Set/Clear Enable Bit 418" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB417 ,Set/Clear Enable Bit 417" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB416 ,Set/Clear Enable Bit 416" "Disabled,Enabled" else hgroup.long 0x0134++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E) group.long 0x0138++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB479 ,Set/Clear Enable Bit 479" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB478 ,Set/Clear Enable Bit 478" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB477 ,Set/Clear Enable Bit 477" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB476 ,Set/Clear Enable Bit 476" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB475 ,Set/Clear Enable Bit 475" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB474 ,Set/Clear Enable Bit 474" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB473 ,Set/Clear Enable Bit 473" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB472 ,Set/Clear Enable Bit 472" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB471 ,Set/Clear Enable Bit 471" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB470 ,Set/Clear Enable Bit 470" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB469 ,Set/Clear Enable Bit 469" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB468 ,Set/Clear Enable Bit 468" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB467 ,Set/Clear Enable Bit 467" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB466 ,Set/Clear Enable Bit 466" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB465 ,Set/Clear Enable Bit 465" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB464 ,Set/Clear Enable Bit 464" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB463 ,Set/Clear Enable Bit 463" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB462 ,Set/Clear Enable Bit 462" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB461 ,Set/Clear Enable Bit 461" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB460 ,Set/Clear Enable Bit 460" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB459 ,Set/Clear Enable Bit 459" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB458 ,Set/Clear Enable Bit 458" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB457 ,Set/Clear Enable Bit 457" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB456 ,Set/Clear Enable Bit 456" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB455 ,Set/Clear Enable Bit 455" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB454 ,Set/Clear Enable Bit 454" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB453 ,Set/Clear Enable Bit 453" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB452 ,Set/Clear Enable Bit 452" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB451 ,Set/Clear Enable Bit 451" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB450 ,Set/Clear Enable Bit 450" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB449 ,Set/Clear Enable Bit 449" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB448 ,Set/Clear Enable Bit 448" "Disabled,Enabled" else hgroup.long 0x0138++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F) group.long 0x013C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB511 ,Set/Clear Enable Bit 511" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB510 ,Set/Clear Enable Bit 510" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB509 ,Set/Clear Enable Bit 509" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB508 ,Set/Clear Enable Bit 508" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB507 ,Set/Clear Enable Bit 507" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB506 ,Set/Clear Enable Bit 506" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB505 ,Set/Clear Enable Bit 505" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB504 ,Set/Clear Enable Bit 504" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB503 ,Set/Clear Enable Bit 503" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB502 ,Set/Clear Enable Bit 502" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB501 ,Set/Clear Enable Bit 501" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB500 ,Set/Clear Enable Bit 500" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB499 ,Set/Clear Enable Bit 499" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB498 ,Set/Clear Enable Bit 498" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB497 ,Set/Clear Enable Bit 497" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB496 ,Set/Clear Enable Bit 496" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB495 ,Set/Clear Enable Bit 495" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB494 ,Set/Clear Enable Bit 494" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB493 ,Set/Clear Enable Bit 493" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB492 ,Set/Clear Enable Bit 492" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB491 ,Set/Clear Enable Bit 491" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB490 ,Set/Clear Enable Bit 490" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB489 ,Set/Clear Enable Bit 489" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB488 ,Set/Clear Enable Bit 488" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB487 ,Set/Clear Enable Bit 487" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB486 ,Set/Clear Enable Bit 486" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB485 ,Set/Clear Enable Bit 485" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB484 ,Set/Clear Enable Bit 484" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB483 ,Set/Clear Enable Bit 483" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB482 ,Set/Clear Enable Bit 482" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB481 ,Set/Clear Enable Bit 481" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB480 ,Set/Clear Enable Bit 480" "Disabled,Enabled" else hgroup.long 0x013C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) group.long 0x0140++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB543 ,Set/Clear Enable Bit 543" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB542 ,Set/Clear Enable Bit 542" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB541 ,Set/Clear Enable Bit 541" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB540 ,Set/Clear Enable Bit 540" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB539 ,Set/Clear Enable Bit 539" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB538 ,Set/Clear Enable Bit 538" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB537 ,Set/Clear Enable Bit 537" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB536 ,Set/Clear Enable Bit 536" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB535 ,Set/Clear Enable Bit 535" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB534 ,Set/Clear Enable Bit 534" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB533 ,Set/Clear Enable Bit 533" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB532 ,Set/Clear Enable Bit 532" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB531 ,Set/Clear Enable Bit 531" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB530 ,Set/Clear Enable Bit 530" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB529 ,Set/Clear Enable Bit 529" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB528 ,Set/Clear Enable Bit 528" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB527 ,Set/Clear Enable Bit 527" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB526 ,Set/Clear Enable Bit 526" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB525 ,Set/Clear Enable Bit 525" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB524 ,Set/Clear Enable Bit 524" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB523 ,Set/Clear Enable Bit 523" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB522 ,Set/Clear Enable Bit 522" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB521 ,Set/Clear Enable Bit 521" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB520 ,Set/Clear Enable Bit 520" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB519 ,Set/Clear Enable Bit 519" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB518 ,Set/Clear Enable Bit 518" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB517 ,Set/Clear Enable Bit 517" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB516 ,Set/Clear Enable Bit 516" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB515 ,Set/Clear Enable Bit 515" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB514 ,Set/Clear Enable Bit 514" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB513 ,Set/Clear Enable Bit 513" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB512 ,Set/Clear Enable Bit 512" "Disabled,Enabled" else hgroup.long 0x0140++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) group.long 0x0144++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB575 ,Set/Clear Enable Bit 575" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB574 ,Set/Clear Enable Bit 574" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB573 ,Set/Clear Enable Bit 573" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB572 ,Set/Clear Enable Bit 572" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB571 ,Set/Clear Enable Bit 571" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB570 ,Set/Clear Enable Bit 570" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB569 ,Set/Clear Enable Bit 569" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB568 ,Set/Clear Enable Bit 568" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB567 ,Set/Clear Enable Bit 567" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB566 ,Set/Clear Enable Bit 566" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB565 ,Set/Clear Enable Bit 565" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB564 ,Set/Clear Enable Bit 564" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB563 ,Set/Clear Enable Bit 563" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB562 ,Set/Clear Enable Bit 562" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB561 ,Set/Clear Enable Bit 561" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB560 ,Set/Clear Enable Bit 560" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB559 ,Set/Clear Enable Bit 559" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB558 ,Set/Clear Enable Bit 558" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB557 ,Set/Clear Enable Bit 557" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB556 ,Set/Clear Enable Bit 556" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB555 ,Set/Clear Enable Bit 555" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB554 ,Set/Clear Enable Bit 554" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB553 ,Set/Clear Enable Bit 553" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB552 ,Set/Clear Enable Bit 552" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB551 ,Set/Clear Enable Bit 551" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB550 ,Set/Clear Enable Bit 550" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB549 ,Set/Clear Enable Bit 549" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB548 ,Set/Clear Enable Bit 548" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB547 ,Set/Clear Enable Bit 547" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB546 ,Set/Clear Enable Bit 546" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB545 ,Set/Clear Enable Bit 545" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB544 ,Set/Clear Enable Bit 544" "Disabled,Enabled" else hgroup.long 0x0144++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) group.long 0x0148++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB607 ,Set/Clear Enable Bit 607" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB606 ,Set/Clear Enable Bit 606" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB605 ,Set/Clear Enable Bit 605" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB604 ,Set/Clear Enable Bit 604" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB603 ,Set/Clear Enable Bit 603" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB602 ,Set/Clear Enable Bit 602" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB601 ,Set/Clear Enable Bit 601" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB600 ,Set/Clear Enable Bit 600" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB599 ,Set/Clear Enable Bit 599" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB598 ,Set/Clear Enable Bit 598" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB597 ,Set/Clear Enable Bit 597" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB596 ,Set/Clear Enable Bit 596" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB595 ,Set/Clear Enable Bit 595" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB594 ,Set/Clear Enable Bit 594" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB593 ,Set/Clear Enable Bit 593" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB592 ,Set/Clear Enable Bit 592" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB591 ,Set/Clear Enable Bit 591" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB590 ,Set/Clear Enable Bit 590" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB589 ,Set/Clear Enable Bit 589" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB588 ,Set/Clear Enable Bit 588" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB587 ,Set/Clear Enable Bit 587" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB586 ,Set/Clear Enable Bit 586" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB585 ,Set/Clear Enable Bit 585" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB584 ,Set/Clear Enable Bit 584" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB583 ,Set/Clear Enable Bit 583" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB582 ,Set/Clear Enable Bit 582" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB581 ,Set/Clear Enable Bit 581" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB580 ,Set/Clear Enable Bit 580" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB579 ,Set/Clear Enable Bit 579" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB578 ,Set/Clear Enable Bit 578" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB577 ,Set/Clear Enable Bit 577" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB576 ,Set/Clear Enable Bit 576" "Disabled,Enabled" else hgroup.long 0x0148++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) group.long 0x014C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB639 ,Set/Clear Enable Bit 639" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB638 ,Set/Clear Enable Bit 638" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB637 ,Set/Clear Enable Bit 637" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB636 ,Set/Clear Enable Bit 636" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB635 ,Set/Clear Enable Bit 635" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB634 ,Set/Clear Enable Bit 634" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB633 ,Set/Clear Enable Bit 633" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB632 ,Set/Clear Enable Bit 632" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB631 ,Set/Clear Enable Bit 631" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB630 ,Set/Clear Enable Bit 630" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB629 ,Set/Clear Enable Bit 629" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB628 ,Set/Clear Enable Bit 628" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB627 ,Set/Clear Enable Bit 627" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB626 ,Set/Clear Enable Bit 626" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB625 ,Set/Clear Enable Bit 625" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB624 ,Set/Clear Enable Bit 624" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB623 ,Set/Clear Enable Bit 623" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB622 ,Set/Clear Enable Bit 622" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB621 ,Set/Clear Enable Bit 621" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB620 ,Set/Clear Enable Bit 620" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB619 ,Set/Clear Enable Bit 619" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB618 ,Set/Clear Enable Bit 618" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB617 ,Set/Clear Enable Bit 617" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB616 ,Set/Clear Enable Bit 616" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB615 ,Set/Clear Enable Bit 615" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB614 ,Set/Clear Enable Bit 614" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB613 ,Set/Clear Enable Bit 613" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB612 ,Set/Clear Enable Bit 612" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB611 ,Set/Clear Enable Bit 611" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB610 ,Set/Clear Enable Bit 610" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB609 ,Set/Clear Enable Bit 609" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB608 ,Set/Clear Enable Bit 608" "Disabled,Enabled" else hgroup.long 0x014C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) group.long 0x0150++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB671 ,Set/Clear Enable Bit 671" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB670 ,Set/Clear Enable Bit 670" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB669 ,Set/Clear Enable Bit 669" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB668 ,Set/Clear Enable Bit 668" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB667 ,Set/Clear Enable Bit 667" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB666 ,Set/Clear Enable Bit 666" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB665 ,Set/Clear Enable Bit 665" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB664 ,Set/Clear Enable Bit 664" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB663 ,Set/Clear Enable Bit 663" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB662 ,Set/Clear Enable Bit 662" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB661 ,Set/Clear Enable Bit 661" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB660 ,Set/Clear Enable Bit 660" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB659 ,Set/Clear Enable Bit 659" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB658 ,Set/Clear Enable Bit 658" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB657 ,Set/Clear Enable Bit 657" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB656 ,Set/Clear Enable Bit 656" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB655 ,Set/Clear Enable Bit 655" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB654 ,Set/Clear Enable Bit 654" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB653 ,Set/Clear Enable Bit 653" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB652 ,Set/Clear Enable Bit 652" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB651 ,Set/Clear Enable Bit 651" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB650 ,Set/Clear Enable Bit 650" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB649 ,Set/Clear Enable Bit 649" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB648 ,Set/Clear Enable Bit 648" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB647 ,Set/Clear Enable Bit 647" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB646 ,Set/Clear Enable Bit 646" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB645 ,Set/Clear Enable Bit 645" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB644 ,Set/Clear Enable Bit 644" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB643 ,Set/Clear Enable Bit 643" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB642 ,Set/Clear Enable Bit 642" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB641 ,Set/Clear Enable Bit 641" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB640 ,Set/Clear Enable Bit 640" "Disabled,Enabled" else hgroup.long 0x0150++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) group.long 0x0154++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB703 ,Set/Clear Enable Bit 703" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB702 ,Set/Clear Enable Bit 702" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB701 ,Set/Clear Enable Bit 701" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB700 ,Set/Clear Enable Bit 700" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB699 ,Set/Clear Enable Bit 699" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB698 ,Set/Clear Enable Bit 698" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB697 ,Set/Clear Enable Bit 697" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB696 ,Set/Clear Enable Bit 696" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB695 ,Set/Clear Enable Bit 695" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB694 ,Set/Clear Enable Bit 694" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB693 ,Set/Clear Enable Bit 693" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB692 ,Set/Clear Enable Bit 692" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB691 ,Set/Clear Enable Bit 691" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB690 ,Set/Clear Enable Bit 690" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB689 ,Set/Clear Enable Bit 689" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB688 ,Set/Clear Enable Bit 688" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB687 ,Set/Clear Enable Bit 687" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB686 ,Set/Clear Enable Bit 686" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB685 ,Set/Clear Enable Bit 685" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB684 ,Set/Clear Enable Bit 684" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB683 ,Set/Clear Enable Bit 683" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB682 ,Set/Clear Enable Bit 682" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB681 ,Set/Clear Enable Bit 681" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB680 ,Set/Clear Enable Bit 680" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB679 ,Set/Clear Enable Bit 679" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB678 ,Set/Clear Enable Bit 678" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB677 ,Set/Clear Enable Bit 677" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB676 ,Set/Clear Enable Bit 676" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB675 ,Set/Clear Enable Bit 675" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB674 ,Set/Clear Enable Bit 674" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB673 ,Set/Clear Enable Bit 673" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB672 ,Set/Clear Enable Bit 672" "Disabled,Enabled" else hgroup.long 0x0154++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) group.long 0x0158++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB735 ,Set/Clear Enable Bit 735" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB734 ,Set/Clear Enable Bit 734" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB733 ,Set/Clear Enable Bit 733" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB732 ,Set/Clear Enable Bit 732" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB731 ,Set/Clear Enable Bit 731" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB730 ,Set/Clear Enable Bit 730" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB729 ,Set/Clear Enable Bit 729" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB728 ,Set/Clear Enable Bit 728" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB727 ,Set/Clear Enable Bit 727" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB726 ,Set/Clear Enable Bit 726" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB725 ,Set/Clear Enable Bit 725" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB724 ,Set/Clear Enable Bit 724" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB723 ,Set/Clear Enable Bit 723" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB722 ,Set/Clear Enable Bit 722" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB721 ,Set/Clear Enable Bit 721" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB720 ,Set/Clear Enable Bit 720" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB719 ,Set/Clear Enable Bit 719" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB718 ,Set/Clear Enable Bit 718" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB717 ,Set/Clear Enable Bit 717" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB716 ,Set/Clear Enable Bit 716" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB715 ,Set/Clear Enable Bit 715" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB714 ,Set/Clear Enable Bit 714" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB713 ,Set/Clear Enable Bit 713" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB712 ,Set/Clear Enable Bit 712" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB711 ,Set/Clear Enable Bit 711" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB710 ,Set/Clear Enable Bit 710" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB709 ,Set/Clear Enable Bit 709" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB708 ,Set/Clear Enable Bit 708" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB707 ,Set/Clear Enable Bit 707" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB706 ,Set/Clear Enable Bit 706" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB705 ,Set/Clear Enable Bit 705" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB704 ,Set/Clear Enable Bit 704" "Disabled,Enabled" else hgroup.long 0x0158++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) group.long 0x015C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB767 ,Set/Clear Enable Bit 767" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB766 ,Set/Clear Enable Bit 766" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB765 ,Set/Clear Enable Bit 765" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB764 ,Set/Clear Enable Bit 764" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB763 ,Set/Clear Enable Bit 763" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB762 ,Set/Clear Enable Bit 762" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB761 ,Set/Clear Enable Bit 761" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB760 ,Set/Clear Enable Bit 760" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB759 ,Set/Clear Enable Bit 759" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB758 ,Set/Clear Enable Bit 758" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB757 ,Set/Clear Enable Bit 757" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB756 ,Set/Clear Enable Bit 756" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB755 ,Set/Clear Enable Bit 755" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB754 ,Set/Clear Enable Bit 754" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB753 ,Set/Clear Enable Bit 753" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB752 ,Set/Clear Enable Bit 752" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB751 ,Set/Clear Enable Bit 751" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB750 ,Set/Clear Enable Bit 750" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB749 ,Set/Clear Enable Bit 749" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB748 ,Set/Clear Enable Bit 748" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB747 ,Set/Clear Enable Bit 747" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB746 ,Set/Clear Enable Bit 746" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB745 ,Set/Clear Enable Bit 745" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB744 ,Set/Clear Enable Bit 744" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB743 ,Set/Clear Enable Bit 743" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB742 ,Set/Clear Enable Bit 742" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB741 ,Set/Clear Enable Bit 741" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB740 ,Set/Clear Enable Bit 740" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB739 ,Set/Clear Enable Bit 739" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB738 ,Set/Clear Enable Bit 738" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB737 ,Set/Clear Enable Bit 737" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB736 ,Set/Clear Enable Bit 736" "Disabled,Enabled" else hgroup.long 0x015C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) group.long 0x0160++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB799 ,Set/Clear Enable Bit 799" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB798 ,Set/Clear Enable Bit 798" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB797 ,Set/Clear Enable Bit 797" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB796 ,Set/Clear Enable Bit 796" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB795 ,Set/Clear Enable Bit 795" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB794 ,Set/Clear Enable Bit 794" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB793 ,Set/Clear Enable Bit 793" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB792 ,Set/Clear Enable Bit 792" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB791 ,Set/Clear Enable Bit 791" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB790 ,Set/Clear Enable Bit 790" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB789 ,Set/Clear Enable Bit 789" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB788 ,Set/Clear Enable Bit 788" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB787 ,Set/Clear Enable Bit 787" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB786 ,Set/Clear Enable Bit 786" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB785 ,Set/Clear Enable Bit 785" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB784 ,Set/Clear Enable Bit 784" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB783 ,Set/Clear Enable Bit 783" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB782 ,Set/Clear Enable Bit 782" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB781 ,Set/Clear Enable Bit 781" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB780 ,Set/Clear Enable Bit 780" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB779 ,Set/Clear Enable Bit 779" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB778 ,Set/Clear Enable Bit 778" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB777 ,Set/Clear Enable Bit 777" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB776 ,Set/Clear Enable Bit 776" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB775 ,Set/Clear Enable Bit 775" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB774 ,Set/Clear Enable Bit 774" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB773 ,Set/Clear Enable Bit 773" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB772 ,Set/Clear Enable Bit 772" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB771 ,Set/Clear Enable Bit 771" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB770 ,Set/Clear Enable Bit 770" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB769 ,Set/Clear Enable Bit 769" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB768 ,Set/Clear Enable Bit 768" "Disabled,Enabled" else hgroup.long 0x0160++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) group.long 0x0164++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB831 ,Set/Clear Enable Bit 831" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB830 ,Set/Clear Enable Bit 830" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB829 ,Set/Clear Enable Bit 829" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB828 ,Set/Clear Enable Bit 828" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB827 ,Set/Clear Enable Bit 827" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB826 ,Set/Clear Enable Bit 826" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB825 ,Set/Clear Enable Bit 825" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB824 ,Set/Clear Enable Bit 824" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB823 ,Set/Clear Enable Bit 823" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB822 ,Set/Clear Enable Bit 822" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB821 ,Set/Clear Enable Bit 821" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB820 ,Set/Clear Enable Bit 820" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB819 ,Set/Clear Enable Bit 819" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB818 ,Set/Clear Enable Bit 818" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB817 ,Set/Clear Enable Bit 817" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB816 ,Set/Clear Enable Bit 816" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB815 ,Set/Clear Enable Bit 815" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB814 ,Set/Clear Enable Bit 814" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB813 ,Set/Clear Enable Bit 813" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB812 ,Set/Clear Enable Bit 812" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB811 ,Set/Clear Enable Bit 811" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB810 ,Set/Clear Enable Bit 810" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB809 ,Set/Clear Enable Bit 809" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB808 ,Set/Clear Enable Bit 808" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB807 ,Set/Clear Enable Bit 807" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB806 ,Set/Clear Enable Bit 806" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB805 ,Set/Clear Enable Bit 805" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB804 ,Set/Clear Enable Bit 804" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB803 ,Set/Clear Enable Bit 803" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB802 ,Set/Clear Enable Bit 802" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB801 ,Set/Clear Enable Bit 801" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB800 ,Set/Clear Enable Bit 800" "Disabled,Enabled" else hgroup.long 0x0164++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) group.long 0x0168++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB863 ,Set/Clear Enable Bit 863" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB862 ,Set/Clear Enable Bit 862" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB861 ,Set/Clear Enable Bit 861" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB860 ,Set/Clear Enable Bit 860" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB859 ,Set/Clear Enable Bit 859" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB858 ,Set/Clear Enable Bit 858" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB857 ,Set/Clear Enable Bit 857" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB856 ,Set/Clear Enable Bit 856" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB855 ,Set/Clear Enable Bit 855" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB854 ,Set/Clear Enable Bit 854" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB853 ,Set/Clear Enable Bit 853" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB852 ,Set/Clear Enable Bit 852" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB851 ,Set/Clear Enable Bit 851" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB850 ,Set/Clear Enable Bit 850" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB849 ,Set/Clear Enable Bit 849" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB848 ,Set/Clear Enable Bit 848" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB847 ,Set/Clear Enable Bit 847" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB846 ,Set/Clear Enable Bit 846" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB845 ,Set/Clear Enable Bit 845" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB844 ,Set/Clear Enable Bit 844" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB843 ,Set/Clear Enable Bit 843" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB842 ,Set/Clear Enable Bit 842" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB841 ,Set/Clear Enable Bit 841" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB840 ,Set/Clear Enable Bit 840" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB839 ,Set/Clear Enable Bit 839" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB838 ,Set/Clear Enable Bit 838" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB837 ,Set/Clear Enable Bit 837" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB836 ,Set/Clear Enable Bit 836" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB835 ,Set/Clear Enable Bit 835" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB834 ,Set/Clear Enable Bit 834" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB833 ,Set/Clear Enable Bit 833" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB832 ,Set/Clear Enable Bit 832" "Disabled,Enabled" else hgroup.long 0x0168++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) group.long 0x016C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB895 ,Set/Clear Enable Bit 895" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB894 ,Set/Clear Enable Bit 894" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB893 ,Set/Clear Enable Bit 893" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB892 ,Set/Clear Enable Bit 892" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB891 ,Set/Clear Enable Bit 891" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB890 ,Set/Clear Enable Bit 890" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB889 ,Set/Clear Enable Bit 889" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB888 ,Set/Clear Enable Bit 888" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB887 ,Set/Clear Enable Bit 887" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB886 ,Set/Clear Enable Bit 886" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB885 ,Set/Clear Enable Bit 885" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB884 ,Set/Clear Enable Bit 884" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB883 ,Set/Clear Enable Bit 883" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB882 ,Set/Clear Enable Bit 882" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB881 ,Set/Clear Enable Bit 881" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB880 ,Set/Clear Enable Bit 880" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB879 ,Set/Clear Enable Bit 879" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB878 ,Set/Clear Enable Bit 878" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB877 ,Set/Clear Enable Bit 877" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB876 ,Set/Clear Enable Bit 876" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB875 ,Set/Clear Enable Bit 875" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB874 ,Set/Clear Enable Bit 874" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB873 ,Set/Clear Enable Bit 873" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB872 ,Set/Clear Enable Bit 872" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB871 ,Set/Clear Enable Bit 871" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB870 ,Set/Clear Enable Bit 870" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB869 ,Set/Clear Enable Bit 869" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB868 ,Set/Clear Enable Bit 868" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB867 ,Set/Clear Enable Bit 867" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB866 ,Set/Clear Enable Bit 866" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB865 ,Set/Clear Enable Bit 865" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB864 ,Set/Clear Enable Bit 864" "Disabled,Enabled" else hgroup.long 0x016C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) group.long 0x0170++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB927 ,Set/Clear Enable Bit 927" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB926 ,Set/Clear Enable Bit 926" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB925 ,Set/Clear Enable Bit 925" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB924 ,Set/Clear Enable Bit 924" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB923 ,Set/Clear Enable Bit 923" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB922 ,Set/Clear Enable Bit 922" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB921 ,Set/Clear Enable Bit 921" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB920 ,Set/Clear Enable Bit 920" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB919 ,Set/Clear Enable Bit 919" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB918 ,Set/Clear Enable Bit 918" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB917 ,Set/Clear Enable Bit 917" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB916 ,Set/Clear Enable Bit 916" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB915 ,Set/Clear Enable Bit 915" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB914 ,Set/Clear Enable Bit 914" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB913 ,Set/Clear Enable Bit 913" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB912 ,Set/Clear Enable Bit 912" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB911 ,Set/Clear Enable Bit 911" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB910 ,Set/Clear Enable Bit 910" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB909 ,Set/Clear Enable Bit 909" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB908 ,Set/Clear Enable Bit 908" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB907 ,Set/Clear Enable Bit 907" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB906 ,Set/Clear Enable Bit 906" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB905 ,Set/Clear Enable Bit 905" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB904 ,Set/Clear Enable Bit 904" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB903 ,Set/Clear Enable Bit 903" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB902 ,Set/Clear Enable Bit 902" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB901 ,Set/Clear Enable Bit 901" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB900 ,Set/Clear Enable Bit 900" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB899 ,Set/Clear Enable Bit 899" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB898 ,Set/Clear Enable Bit 898" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB897 ,Set/Clear Enable Bit 897" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB896 ,Set/Clear Enable Bit 896" "Disabled,Enabled" else hgroup.long 0x0170++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) group.long 0x0174++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB959 ,Set/Clear Enable Bit 959" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB958 ,Set/Clear Enable Bit 958" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB957 ,Set/Clear Enable Bit 957" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB956 ,Set/Clear Enable Bit 956" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB955 ,Set/Clear Enable Bit 955" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB954 ,Set/Clear Enable Bit 954" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB953 ,Set/Clear Enable Bit 953" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB952 ,Set/Clear Enable Bit 952" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB951 ,Set/Clear Enable Bit 951" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB950 ,Set/Clear Enable Bit 950" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB949 ,Set/Clear Enable Bit 949" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB948 ,Set/Clear Enable Bit 948" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB947 ,Set/Clear Enable Bit 947" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB946 ,Set/Clear Enable Bit 946" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB945 ,Set/Clear Enable Bit 945" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB944 ,Set/Clear Enable Bit 944" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB943 ,Set/Clear Enable Bit 943" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB942 ,Set/Clear Enable Bit 942" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB941 ,Set/Clear Enable Bit 941" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB940 ,Set/Clear Enable Bit 940" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB939 ,Set/Clear Enable Bit 939" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB938 ,Set/Clear Enable Bit 938" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB937 ,Set/Clear Enable Bit 937" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB936 ,Set/Clear Enable Bit 936" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB935 ,Set/Clear Enable Bit 935" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB934 ,Set/Clear Enable Bit 934" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB933 ,Set/Clear Enable Bit 933" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB932 ,Set/Clear Enable Bit 932" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB931 ,Set/Clear Enable Bit 931" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB930 ,Set/Clear Enable Bit 930" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB929 ,Set/Clear Enable Bit 929" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB928 ,Set/Clear Enable Bit 928" "Disabled,Enabled" else hgroup.long 0x0174++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) group.long 0x0178++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB991 ,Set/Clear Enable Bit 991" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB990 ,Set/Clear Enable Bit 990" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB989 ,Set/Clear Enable Bit 989" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB988 ,Set/Clear Enable Bit 988" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB987 ,Set/Clear Enable Bit 987" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB986 ,Set/Clear Enable Bit 986" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB985 ,Set/Clear Enable Bit 985" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB984 ,Set/Clear Enable Bit 984" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB983 ,Set/Clear Enable Bit 983" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB982 ,Set/Clear Enable Bit 982" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB981 ,Set/Clear Enable Bit 981" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB980 ,Set/Clear Enable Bit 980" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB979 ,Set/Clear Enable Bit 979" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB978 ,Set/Clear Enable Bit 978" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB977 ,Set/Clear Enable Bit 977" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB976 ,Set/Clear Enable Bit 976" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB975 ,Set/Clear Enable Bit 975" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB974 ,Set/Clear Enable Bit 974" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB973 ,Set/Clear Enable Bit 973" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB972 ,Set/Clear Enable Bit 972" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB971 ,Set/Clear Enable Bit 971" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB970 ,Set/Clear Enable Bit 970" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB969 ,Set/Clear Enable Bit 969" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB968 ,Set/Clear Enable Bit 968" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB967 ,Set/Clear Enable Bit 967" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB966 ,Set/Clear Enable Bit 966" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB965 ,Set/Clear Enable Bit 965" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB964 ,Set/Clear Enable Bit 964" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB963 ,Set/Clear Enable Bit 963" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB962 ,Set/Clear Enable Bit 962" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB961 ,Set/Clear Enable Bit 961" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB960 ,Set/Clear Enable Bit 960" "Disabled,Enabled" else hgroup.long 0x0178++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" endif tree.end width 22. tree "Set/Clear Pending Registers" if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10) hgroup.long 0x0200++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0" newline newline newline newline newline newline newline newline newline newline else group.long 0x0200++0x03 line.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31 ,Set/Clear Pending Bit 31" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND30 ,Set/Clear Pending Bit 30" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND29 ,Set/Clear Pending Bit 29" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28 ,Set/Clear Pending Bit 28" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND27 ,Set/Clear Pending Bit 27" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND26 ,Set/Clear Pending Bit 26" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25 ,Set/Clear Pending Bit 25" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND24 ,Set/Clear Pending Bit 24" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND23 ,Set/Clear Pending Bit 23" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22 ,Set/Clear Pending Bit 22" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND21 ,Set/Clear Pending Bit 21" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND20 ,Set/Clear Pending Bit 20" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19 ,Set/Clear Pending Bit 19" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND18 ,Set/Clear Pending Bit 18" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND17 ,Set/Clear Pending Bit 17" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16 ,Set/Clear Pending Bit 16" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND15 ,Set/Clear Pending Bit 15" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND14 ,Set/Clear Pending Bit 14" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13 ,Set/Clear Pending Bit 13" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND12 ,Set/Clear Pending Bit 12" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND11 ,Set/Clear Pending Bit 11" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10 ,Set/Clear Pending Bit 10" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND9 ,Set/Clear Pending Bit 9" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND8 ,Set/Clear Pending Bit 8" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7 ,Set/Clear Pending Bit 7" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND6 ,Set/Clear Pending Bit 6" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND5 ,Set/Clear Pending Bit 5" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4 ,Set/Clear Pending Bit 4" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND3 ,Set/Clear Pending Bit 3" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND2 ,Set/Clear Pending Bit 2" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1 ,Set/Clear Pending Bit 1" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND0 ,Set/Clear Pending Bit 0" "Not pending,Pending" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01) group.long 0x0204++0x03 line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND63 ,Set/Clear Pending Bit 63" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND62 ,Set/Clear Pending Bit 62" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND61 ,Set/Clear Pending Bit 61" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND60 ,Set/Clear Pending Bit 60" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND59 ,Set/Clear Pending Bit 59" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND58 ,Set/Clear Pending Bit 58" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND57 ,Set/Clear Pending Bit 57" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND56 ,Set/Clear Pending Bit 56" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND55 ,Set/Clear Pending Bit 55" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND54 ,Set/Clear Pending Bit 54" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND53 ,Set/Clear Pending Bit 53" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND52 ,Set/Clear Pending Bit 52" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND51 ,Set/Clear Pending Bit 51" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND50 ,Set/Clear Pending Bit 50" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND49 ,Set/Clear Pending Bit 49" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND48 ,Set/Clear Pending Bit 48" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND47 ,Set/Clear Pending Bit 47" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND46 ,Set/Clear Pending Bit 46" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND45 ,Set/Clear Pending Bit 45" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND44 ,Set/Clear Pending Bit 44" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND43 ,Set/Clear Pending Bit 43" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND42 ,Set/Clear Pending Bit 42" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND41 ,Set/Clear Pending Bit 41" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND40 ,Set/Clear Pending Bit 40" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND39 ,Set/Clear Pending Bit 39" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND38 ,Set/Clear Pending Bit 38" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND37 ,Set/Clear Pending Bit 37" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND36 ,Set/Clear Pending Bit 36" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND35 ,Set/Clear Pending Bit 35" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND34 ,Set/Clear Pending Bit 34" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND33 ,Set/Clear Pending Bit 33" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND32 ,Set/Clear Pending Bit 32" "Not pending,Pending" else hgroup.long 0x0204++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02) group.long 0x0208++0x03 line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND95 ,Set/Clear Pending Bit 95" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND94 ,Set/Clear Pending Bit 94" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND93 ,Set/Clear Pending Bit 93" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND92 ,Set/Clear Pending Bit 92" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND91 ,Set/Clear Pending Bit 91" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND90 ,Set/Clear Pending Bit 90" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND89 ,Set/Clear Pending Bit 89" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND88 ,Set/Clear Pending Bit 88" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND87 ,Set/Clear Pending Bit 87" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND86 ,Set/Clear Pending Bit 86" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND85 ,Set/Clear Pending Bit 85" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND84 ,Set/Clear Pending Bit 84" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND83 ,Set/Clear Pending Bit 83" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND82 ,Set/Clear Pending Bit 82" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND81 ,Set/Clear Pending Bit 81" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND80 ,Set/Clear Pending Bit 80" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND79 ,Set/Clear Pending Bit 79" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND78 ,Set/Clear Pending Bit 78" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND77 ,Set/Clear Pending Bit 77" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND76 ,Set/Clear Pending Bit 76" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND75 ,Set/Clear Pending Bit 75" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND74 ,Set/Clear Pending Bit 74" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND73 ,Set/Clear Pending Bit 73" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND72 ,Set/Clear Pending Bit 72" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND71 ,Set/Clear Pending Bit 71" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND70 ,Set/Clear Pending Bit 70" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND69 ,Set/Clear Pending Bit 69" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND68 ,Set/Clear Pending Bit 68" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND67 ,Set/Clear Pending Bit 67" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND66 ,Set/Clear Pending Bit 66" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND65 ,Set/Clear Pending Bit 65" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND64 ,Set/Clear Pending Bit 64" "Not pending,Pending" else hgroup.long 0x0208++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03) group.long 0x020C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND127 ,Set/Clear Pending Bit 127" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND126 ,Set/Clear Pending Bit 126" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND125 ,Set/Clear Pending Bit 125" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND124 ,Set/Clear Pending Bit 124" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND123 ,Set/Clear Pending Bit 123" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND122 ,Set/Clear Pending Bit 122" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND121 ,Set/Clear Pending Bit 121" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND120 ,Set/Clear Pending Bit 120" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND119 ,Set/Clear Pending Bit 119" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND118 ,Set/Clear Pending Bit 118" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND117 ,Set/Clear Pending Bit 117" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND116 ,Set/Clear Pending Bit 116" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND115 ,Set/Clear Pending Bit 115" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND114 ,Set/Clear Pending Bit 114" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND113 ,Set/Clear Pending Bit 113" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND112 ,Set/Clear Pending Bit 112" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND111 ,Set/Clear Pending Bit 111" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND110 ,Set/Clear Pending Bit 110" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND109 ,Set/Clear Pending Bit 109" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND108 ,Set/Clear Pending Bit 108" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND107 ,Set/Clear Pending Bit 107" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND106 ,Set/Clear Pending Bit 106" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND105 ,Set/Clear Pending Bit 105" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND104 ,Set/Clear Pending Bit 104" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND103 ,Set/Clear Pending Bit 103" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND102 ,Set/Clear Pending Bit 102" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND101 ,Set/Clear Pending Bit 101" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND100 ,Set/Clear Pending Bit 100" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND99 ,Set/Clear Pending Bit 99" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND98 ,Set/Clear Pending Bit 98" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND97 ,Set/Clear Pending Bit 97" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND96 ,Set/Clear Pending Bit 96" "Not pending,Pending" else hgroup.long 0x020C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04) group.long 0x0210++0x03 line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND159 ,Set/Clear Pending Bit 159" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND158 ,Set/Clear Pending Bit 158" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND157 ,Set/Clear Pending Bit 157" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND156 ,Set/Clear Pending Bit 156" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND155 ,Set/Clear Pending Bit 155" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND154 ,Set/Clear Pending Bit 154" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND153 ,Set/Clear Pending Bit 153" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND152 ,Set/Clear Pending Bit 152" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND151 ,Set/Clear Pending Bit 151" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND150 ,Set/Clear Pending Bit 150" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND149 ,Set/Clear Pending Bit 149" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND148 ,Set/Clear Pending Bit 148" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND147 ,Set/Clear Pending Bit 147" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND146 ,Set/Clear Pending Bit 146" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND145 ,Set/Clear Pending Bit 145" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND144 ,Set/Clear Pending Bit 144" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND143 ,Set/Clear Pending Bit 143" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND142 ,Set/Clear Pending Bit 142" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND141 ,Set/Clear Pending Bit 141" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND140 ,Set/Clear Pending Bit 140" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND139 ,Set/Clear Pending Bit 139" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND138 ,Set/Clear Pending Bit 138" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND137 ,Set/Clear Pending Bit 137" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND136 ,Set/Clear Pending Bit 136" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND135 ,Set/Clear Pending Bit 135" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND134 ,Set/Clear Pending Bit 134" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND133 ,Set/Clear Pending Bit 133" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND132 ,Set/Clear Pending Bit 132" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND131 ,Set/Clear Pending Bit 131" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND130 ,Set/Clear Pending Bit 130" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND129 ,Set/Clear Pending Bit 129" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND128 ,Set/Clear Pending Bit 128" "Not pending,Pending" else hgroup.long 0x0210++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05) group.long 0x0214++0x03 line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND191 ,Set/Clear Pending Bit 191" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND190 ,Set/Clear Pending Bit 190" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND189 ,Set/Clear Pending Bit 189" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND188 ,Set/Clear Pending Bit 188" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND187 ,Set/Clear Pending Bit 187" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND186 ,Set/Clear Pending Bit 186" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND185 ,Set/Clear Pending Bit 185" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND184 ,Set/Clear Pending Bit 184" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND183 ,Set/Clear Pending Bit 183" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND182 ,Set/Clear Pending Bit 182" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND181 ,Set/Clear Pending Bit 181" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND180 ,Set/Clear Pending Bit 180" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND179 ,Set/Clear Pending Bit 179" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND178 ,Set/Clear Pending Bit 178" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND177 ,Set/Clear Pending Bit 177" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND176 ,Set/Clear Pending Bit 176" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND175 ,Set/Clear Pending Bit 175" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND174 ,Set/Clear Pending Bit 174" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND173 ,Set/Clear Pending Bit 173" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND172 ,Set/Clear Pending Bit 172" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND171 ,Set/Clear Pending Bit 171" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND170 ,Set/Clear Pending Bit 170" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND169 ,Set/Clear Pending Bit 169" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND168 ,Set/Clear Pending Bit 168" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND167 ,Set/Clear Pending Bit 167" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND166 ,Set/Clear Pending Bit 166" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND165 ,Set/Clear Pending Bit 165" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND164 ,Set/Clear Pending Bit 164" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND163 ,Set/Clear Pending Bit 163" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND162 ,Set/Clear Pending Bit 162" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND161 ,Set/Clear Pending Bit 161" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND160 ,Set/Clear Pending Bit 160" "Not pending,Pending" else hgroup.long 0x0214++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06) group.long 0x0218++0x03 line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND223 ,Set/Clear Pending Bit 223" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND222 ,Set/Clear Pending Bit 222" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND221 ,Set/Clear Pending Bit 221" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND220 ,Set/Clear Pending Bit 220" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND219 ,Set/Clear Pending Bit 219" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND218 ,Set/Clear Pending Bit 218" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND217 ,Set/Clear Pending Bit 217" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND216 ,Set/Clear Pending Bit 216" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND215 ,Set/Clear Pending Bit 215" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND214 ,Set/Clear Pending Bit 214" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND213 ,Set/Clear Pending Bit 213" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND212 ,Set/Clear Pending Bit 212" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND211 ,Set/Clear Pending Bit 211" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND210 ,Set/Clear Pending Bit 210" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND209 ,Set/Clear Pending Bit 209" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND208 ,Set/Clear Pending Bit 208" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND207 ,Set/Clear Pending Bit 207" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND206 ,Set/Clear Pending Bit 206" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND205 ,Set/Clear Pending Bit 205" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND204 ,Set/Clear Pending Bit 204" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND203 ,Set/Clear Pending Bit 203" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND202 ,Set/Clear Pending Bit 202" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND201 ,Set/Clear Pending Bit 201" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND200 ,Set/Clear Pending Bit 200" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND199 ,Set/Clear Pending Bit 199" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND198 ,Set/Clear Pending Bit 198" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND197 ,Set/Clear Pending Bit 197" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND196 ,Set/Clear Pending Bit 196" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND195 ,Set/Clear Pending Bit 195" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND194 ,Set/Clear Pending Bit 194" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND193 ,Set/Clear Pending Bit 193" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND192 ,Set/Clear Pending Bit 192" "Not pending,Pending" else hgroup.long 0x0218++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07) group.long 0x021C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND255 ,Set/Clear Pending Bit 255" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND254 ,Set/Clear Pending Bit 254" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND253 ,Set/Clear Pending Bit 253" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND252 ,Set/Clear Pending Bit 252" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND251 ,Set/Clear Pending Bit 251" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND250 ,Set/Clear Pending Bit 250" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND249 ,Set/Clear Pending Bit 249" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND248 ,Set/Clear Pending Bit 248" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND247 ,Set/Clear Pending Bit 247" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND246 ,Set/Clear Pending Bit 246" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND245 ,Set/Clear Pending Bit 245" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND244 ,Set/Clear Pending Bit 244" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND243 ,Set/Clear Pending Bit 243" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND242 ,Set/Clear Pending Bit 242" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND241 ,Set/Clear Pending Bit 241" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND240 ,Set/Clear Pending Bit 240" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND239 ,Set/Clear Pending Bit 239" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND238 ,Set/Clear Pending Bit 238" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND237 ,Set/Clear Pending Bit 237" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND236 ,Set/Clear Pending Bit 236" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND235 ,Set/Clear Pending Bit 235" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND234 ,Set/Clear Pending Bit 234" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND233 ,Set/Clear Pending Bit 233" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND232 ,Set/Clear Pending Bit 232" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND231 ,Set/Clear Pending Bit 231" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND230 ,Set/Clear Pending Bit 230" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND229 ,Set/Clear Pending Bit 229" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND228 ,Set/Clear Pending Bit 228" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND227 ,Set/Clear Pending Bit 227" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND226 ,Set/Clear Pending Bit 226" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND225 ,Set/Clear Pending Bit 225" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND224 ,Set/Clear Pending Bit 224" "Not pending,Pending" else hgroup.long 0x021C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08) group.long 0x0220++0x03 line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND287 ,Set/Clear Pending Bit 287" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND286 ,Set/Clear Pending Bit 286" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND285 ,Set/Clear Pending Bit 285" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND284 ,Set/Clear Pending Bit 284" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND283 ,Set/Clear Pending Bit 283" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND282 ,Set/Clear Pending Bit 282" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND281 ,Set/Clear Pending Bit 281" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND280 ,Set/Clear Pending Bit 280" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND279 ,Set/Clear Pending Bit 279" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND278 ,Set/Clear Pending Bit 278" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND277 ,Set/Clear Pending Bit 277" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND276 ,Set/Clear Pending Bit 276" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND275 ,Set/Clear Pending Bit 275" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND274 ,Set/Clear Pending Bit 274" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND273 ,Set/Clear Pending Bit 273" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND272 ,Set/Clear Pending Bit 272" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND271 ,Set/Clear Pending Bit 271" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND270 ,Set/Clear Pending Bit 270" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND269 ,Set/Clear Pending Bit 269" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND268 ,Set/Clear Pending Bit 268" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND267 ,Set/Clear Pending Bit 267" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND266 ,Set/Clear Pending Bit 266" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND265 ,Set/Clear Pending Bit 265" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND264 ,Set/Clear Pending Bit 264" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND263 ,Set/Clear Pending Bit 263" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND262 ,Set/Clear Pending Bit 262" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND261 ,Set/Clear Pending Bit 261" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND260 ,Set/Clear Pending Bit 260" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND259 ,Set/Clear Pending Bit 259" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND258 ,Set/Clear Pending Bit 258" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND257 ,Set/Clear Pending Bit 257" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND256 ,Set/Clear Pending Bit 256" "Not pending,Pending" else hgroup.long 0x0220++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09) group.long 0x0224++0x03 line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND319 ,Set/Clear Pending Bit 319" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND318 ,Set/Clear Pending Bit 318" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND317 ,Set/Clear Pending Bit 317" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND316 ,Set/Clear Pending Bit 316" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND315 ,Set/Clear Pending Bit 315" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND314 ,Set/Clear Pending Bit 314" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND313 ,Set/Clear Pending Bit 313" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND312 ,Set/Clear Pending Bit 312" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND311 ,Set/Clear Pending Bit 311" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND310 ,Set/Clear Pending Bit 310" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND309 ,Set/Clear Pending Bit 309" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND308 ,Set/Clear Pending Bit 308" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND307 ,Set/Clear Pending Bit 307" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND306 ,Set/Clear Pending Bit 306" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND305 ,Set/Clear Pending Bit 305" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND304 ,Set/Clear Pending Bit 304" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND303 ,Set/Clear Pending Bit 303" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND302 ,Set/Clear Pending Bit 302" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND301 ,Set/Clear Pending Bit 301" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND300 ,Set/Clear Pending Bit 300" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND299 ,Set/Clear Pending Bit 299" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND298 ,Set/Clear Pending Bit 298" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND297 ,Set/Clear Pending Bit 297" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND296 ,Set/Clear Pending Bit 296" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND295 ,Set/Clear Pending Bit 295" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND294 ,Set/Clear Pending Bit 294" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND293 ,Set/Clear Pending Bit 293" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND292 ,Set/Clear Pending Bit 292" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND291 ,Set/Clear Pending Bit 291" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND290 ,Set/Clear Pending Bit 290" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND289 ,Set/Clear Pending Bit 289" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND288 ,Set/Clear Pending Bit 288" "Not pending,Pending" else hgroup.long 0x0224++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A) group.long 0x0228++0x03 line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND351 ,Set/Clear Pending Bit 351" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND350 ,Set/Clear Pending Bit 350" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND349 ,Set/Clear Pending Bit 349" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND348 ,Set/Clear Pending Bit 348" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND347 ,Set/Clear Pending Bit 347" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND346 ,Set/Clear Pending Bit 346" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND345 ,Set/Clear Pending Bit 345" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND344 ,Set/Clear Pending Bit 344" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND343 ,Set/Clear Pending Bit 343" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND342 ,Set/Clear Pending Bit 342" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND341 ,Set/Clear Pending Bit 341" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND340 ,Set/Clear Pending Bit 340" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND339 ,Set/Clear Pending Bit 339" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND338 ,Set/Clear Pending Bit 338" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND337 ,Set/Clear Pending Bit 337" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND336 ,Set/Clear Pending Bit 336" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND335 ,Set/Clear Pending Bit 335" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND334 ,Set/Clear Pending Bit 334" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND333 ,Set/Clear Pending Bit 333" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND332 ,Set/Clear Pending Bit 332" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND331 ,Set/Clear Pending Bit 331" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND330 ,Set/Clear Pending Bit 330" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND329 ,Set/Clear Pending Bit 329" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND328 ,Set/Clear Pending Bit 328" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND327 ,Set/Clear Pending Bit 327" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND326 ,Set/Clear Pending Bit 326" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND325 ,Set/Clear Pending Bit 325" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND324 ,Set/Clear Pending Bit 324" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND323 ,Set/Clear Pending Bit 323" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND322 ,Set/Clear Pending Bit 322" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND321 ,Set/Clear Pending Bit 321" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND320 ,Set/Clear Pending Bit 320" "Not pending,Pending" else hgroup.long 0x0228++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B) group.long 0x022C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND383 ,Set/Clear Pending Bit 383" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND382 ,Set/Clear Pending Bit 382" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND381 ,Set/Clear Pending Bit 381" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND380 ,Set/Clear Pending Bit 380" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND379 ,Set/Clear Pending Bit 379" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND378 ,Set/Clear Pending Bit 378" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND377 ,Set/Clear Pending Bit 377" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND376 ,Set/Clear Pending Bit 376" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND375 ,Set/Clear Pending Bit 375" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND374 ,Set/Clear Pending Bit 374" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND373 ,Set/Clear Pending Bit 373" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND372 ,Set/Clear Pending Bit 372" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND371 ,Set/Clear Pending Bit 371" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND370 ,Set/Clear Pending Bit 370" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND369 ,Set/Clear Pending Bit 369" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND368 ,Set/Clear Pending Bit 368" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND367 ,Set/Clear Pending Bit 367" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND366 ,Set/Clear Pending Bit 366" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND365 ,Set/Clear Pending Bit 365" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND364 ,Set/Clear Pending Bit 364" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND363 ,Set/Clear Pending Bit 363" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND362 ,Set/Clear Pending Bit 362" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND361 ,Set/Clear Pending Bit 361" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND360 ,Set/Clear Pending Bit 360" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND359 ,Set/Clear Pending Bit 359" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND358 ,Set/Clear Pending Bit 358" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND357 ,Set/Clear Pending Bit 357" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND356 ,Set/Clear Pending Bit 356" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND355 ,Set/Clear Pending Bit 355" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND354 ,Set/Clear Pending Bit 354" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND353 ,Set/Clear Pending Bit 353" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND352 ,Set/Clear Pending Bit 352" "Not pending,Pending" else hgroup.long 0x022C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C) group.long 0x0230++0x03 line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND415 ,Set/Clear Pending Bit 415" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND414 ,Set/Clear Pending Bit 414" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND413 ,Set/Clear Pending Bit 413" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND412 ,Set/Clear Pending Bit 412" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND411 ,Set/Clear Pending Bit 411" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND410 ,Set/Clear Pending Bit 410" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND409 ,Set/Clear Pending Bit 409" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND408 ,Set/Clear Pending Bit 408" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND407 ,Set/Clear Pending Bit 407" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND406 ,Set/Clear Pending Bit 406" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND405 ,Set/Clear Pending Bit 405" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND404 ,Set/Clear Pending Bit 404" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND403 ,Set/Clear Pending Bit 403" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND402 ,Set/Clear Pending Bit 402" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND401 ,Set/Clear Pending Bit 401" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND400 ,Set/Clear Pending Bit 400" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND399 ,Set/Clear Pending Bit 399" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND398 ,Set/Clear Pending Bit 398" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND397 ,Set/Clear Pending Bit 397" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND396 ,Set/Clear Pending Bit 396" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND395 ,Set/Clear Pending Bit 395" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND394 ,Set/Clear Pending Bit 394" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND393 ,Set/Clear Pending Bit 393" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND392 ,Set/Clear Pending Bit 392" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND391 ,Set/Clear Pending Bit 391" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND390 ,Set/Clear Pending Bit 390" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND389 ,Set/Clear Pending Bit 389" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND388 ,Set/Clear Pending Bit 388" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND387 ,Set/Clear Pending Bit 387" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND386 ,Set/Clear Pending Bit 386" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND385 ,Set/Clear Pending Bit 385" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND384 ,Set/Clear Pending Bit 384" "Not pending,Pending" else hgroup.long 0x0230++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D) group.long 0x0234++0x03 line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND447 ,Set/Clear Pending Bit 447" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND446 ,Set/Clear Pending Bit 446" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND445 ,Set/Clear Pending Bit 445" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND444 ,Set/Clear Pending Bit 444" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND443 ,Set/Clear Pending Bit 443" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND442 ,Set/Clear Pending Bit 442" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND441 ,Set/Clear Pending Bit 441" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND440 ,Set/Clear Pending Bit 440" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND439 ,Set/Clear Pending Bit 439" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND438 ,Set/Clear Pending Bit 438" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND437 ,Set/Clear Pending Bit 437" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND436 ,Set/Clear Pending Bit 436" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND435 ,Set/Clear Pending Bit 435" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND434 ,Set/Clear Pending Bit 434" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND433 ,Set/Clear Pending Bit 433" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND432 ,Set/Clear Pending Bit 432" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND431 ,Set/Clear Pending Bit 431" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND430 ,Set/Clear Pending Bit 430" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND429 ,Set/Clear Pending Bit 429" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND428 ,Set/Clear Pending Bit 428" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND427 ,Set/Clear Pending Bit 427" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND426 ,Set/Clear Pending Bit 426" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND425 ,Set/Clear Pending Bit 425" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND424 ,Set/Clear Pending Bit 424" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND423 ,Set/Clear Pending Bit 423" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND422 ,Set/Clear Pending Bit 422" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND421 ,Set/Clear Pending Bit 421" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND420 ,Set/Clear Pending Bit 420" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND419 ,Set/Clear Pending Bit 419" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND418 ,Set/Clear Pending Bit 418" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND417 ,Set/Clear Pending Bit 417" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND416 ,Set/Clear Pending Bit 416" "Not pending,Pending" else hgroup.long 0x0234++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E) group.long 0x0238++0x03 line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND479 ,Set/Clear Pending Bit 479" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND478 ,Set/Clear Pending Bit 478" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND477 ,Set/Clear Pending Bit 477" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND476 ,Set/Clear Pending Bit 476" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND475 ,Set/Clear Pending Bit 475" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND474 ,Set/Clear Pending Bit 474" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND473 ,Set/Clear Pending Bit 473" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND472 ,Set/Clear Pending Bit 472" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND471 ,Set/Clear Pending Bit 471" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND470 ,Set/Clear Pending Bit 470" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND469 ,Set/Clear Pending Bit 469" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND468 ,Set/Clear Pending Bit 468" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND467 ,Set/Clear Pending Bit 467" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND466 ,Set/Clear Pending Bit 466" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND465 ,Set/Clear Pending Bit 465" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND464 ,Set/Clear Pending Bit 464" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND463 ,Set/Clear Pending Bit 463" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND462 ,Set/Clear Pending Bit 462" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND461 ,Set/Clear Pending Bit 461" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND460 ,Set/Clear Pending Bit 460" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND459 ,Set/Clear Pending Bit 459" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND458 ,Set/Clear Pending Bit 458" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND457 ,Set/Clear Pending Bit 457" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND456 ,Set/Clear Pending Bit 456" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND455 ,Set/Clear Pending Bit 455" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND454 ,Set/Clear Pending Bit 454" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND453 ,Set/Clear Pending Bit 453" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND452 ,Set/Clear Pending Bit 452" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND451 ,Set/Clear Pending Bit 451" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND450 ,Set/Clear Pending Bit 450" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND449 ,Set/Clear Pending Bit 449" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND448 ,Set/Clear Pending Bit 448" "Not pending,Pending" else hgroup.long 0x0238++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F) group.long 0x023C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND511 ,Set/Clear Pending Bit 511" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND510 ,Set/Clear Pending Bit 510" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND509 ,Set/Clear Pending Bit 509" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND508 ,Set/Clear Pending Bit 508" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND507 ,Set/Clear Pending Bit 507" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND506 ,Set/Clear Pending Bit 506" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND505 ,Set/Clear Pending Bit 505" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND504 ,Set/Clear Pending Bit 504" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND503 ,Set/Clear Pending Bit 503" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND502 ,Set/Clear Pending Bit 502" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND501 ,Set/Clear Pending Bit 501" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND500 ,Set/Clear Pending Bit 500" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND499 ,Set/Clear Pending Bit 499" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND498 ,Set/Clear Pending Bit 498" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND497 ,Set/Clear Pending Bit 497" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND496 ,Set/Clear Pending Bit 496" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND495 ,Set/Clear Pending Bit 495" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND494 ,Set/Clear Pending Bit 494" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND493 ,Set/Clear Pending Bit 493" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND492 ,Set/Clear Pending Bit 492" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND491 ,Set/Clear Pending Bit 491" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND490 ,Set/Clear Pending Bit 490" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND489 ,Set/Clear Pending Bit 489" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND488 ,Set/Clear Pending Bit 488" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND487 ,Set/Clear Pending Bit 487" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND486 ,Set/Clear Pending Bit 486" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND485 ,Set/Clear Pending Bit 485" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND484 ,Set/Clear Pending Bit 484" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND483 ,Set/Clear Pending Bit 483" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND482 ,Set/Clear Pending Bit 482" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND481 ,Set/Clear Pending Bit 481" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND480 ,Set/Clear Pending Bit 480" "Not pending,Pending" else hgroup.long 0x023C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) group.long 0x0240++0x03 line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND543 ,Set/Clear Pending Bit 543" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND542 ,Set/Clear Pending Bit 542" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND541 ,Set/Clear Pending Bit 541" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND540 ,Set/Clear Pending Bit 540" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND539 ,Set/Clear Pending Bit 539" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND538 ,Set/Clear Pending Bit 538" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND537 ,Set/Clear Pending Bit 537" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND536 ,Set/Clear Pending Bit 536" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND535 ,Set/Clear Pending Bit 535" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND534 ,Set/Clear Pending Bit 534" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND533 ,Set/Clear Pending Bit 533" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND532 ,Set/Clear Pending Bit 532" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND531 ,Set/Clear Pending Bit 531" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND530 ,Set/Clear Pending Bit 530" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND529 ,Set/Clear Pending Bit 529" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND528 ,Set/Clear Pending Bit 528" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND527 ,Set/Clear Pending Bit 527" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND526 ,Set/Clear Pending Bit 526" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND525 ,Set/Clear Pending Bit 525" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND524 ,Set/Clear Pending Bit 524" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND523 ,Set/Clear Pending Bit 523" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND522 ,Set/Clear Pending Bit 522" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND521 ,Set/Clear Pending Bit 521" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND520 ,Set/Clear Pending Bit 520" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND519 ,Set/Clear Pending Bit 519" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND518 ,Set/Clear Pending Bit 518" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND517 ,Set/Clear Pending Bit 517" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND516 ,Set/Clear Pending Bit 516" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND515 ,Set/Clear Pending Bit 515" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND514 ,Set/Clear Pending Bit 514" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND513 ,Set/Clear Pending Bit 513" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND512 ,Set/Clear Pending Bit 512" "Not pending,Pending" else hgroup.long 0x0240++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) group.long 0x0244++0x03 line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND575 ,Set/Clear Pending Bit 575" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND574 ,Set/Clear Pending Bit 574" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND573 ,Set/Clear Pending Bit 573" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND572 ,Set/Clear Pending Bit 572" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND571 ,Set/Clear Pending Bit 571" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND570 ,Set/Clear Pending Bit 570" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND569 ,Set/Clear Pending Bit 569" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND568 ,Set/Clear Pending Bit 568" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND567 ,Set/Clear Pending Bit 567" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND566 ,Set/Clear Pending Bit 566" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND565 ,Set/Clear Pending Bit 565" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND564 ,Set/Clear Pending Bit 564" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND563 ,Set/Clear Pending Bit 563" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND562 ,Set/Clear Pending Bit 562" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND561 ,Set/Clear Pending Bit 561" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND560 ,Set/Clear Pending Bit 560" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND559 ,Set/Clear Pending Bit 559" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND558 ,Set/Clear Pending Bit 558" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND557 ,Set/Clear Pending Bit 557" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND556 ,Set/Clear Pending Bit 556" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND555 ,Set/Clear Pending Bit 555" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND554 ,Set/Clear Pending Bit 554" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND553 ,Set/Clear Pending Bit 553" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND552 ,Set/Clear Pending Bit 552" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND551 ,Set/Clear Pending Bit 551" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND550 ,Set/Clear Pending Bit 550" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND549 ,Set/Clear Pending Bit 549" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND548 ,Set/Clear Pending Bit 548" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND547 ,Set/Clear Pending Bit 547" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND546 ,Set/Clear Pending Bit 546" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND545 ,Set/Clear Pending Bit 545" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND544 ,Set/Clear Pending Bit 544" "Not pending,Pending" else hgroup.long 0x0244++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) group.long 0x0248++0x03 line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND607 ,Set/Clear Pending Bit 607" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND606 ,Set/Clear Pending Bit 606" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND605 ,Set/Clear Pending Bit 605" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND604 ,Set/Clear Pending Bit 604" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND603 ,Set/Clear Pending Bit 603" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND602 ,Set/Clear Pending Bit 602" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND601 ,Set/Clear Pending Bit 601" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND600 ,Set/Clear Pending Bit 600" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND599 ,Set/Clear Pending Bit 599" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND598 ,Set/Clear Pending Bit 598" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND597 ,Set/Clear Pending Bit 597" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND596 ,Set/Clear Pending Bit 596" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND595 ,Set/Clear Pending Bit 595" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND594 ,Set/Clear Pending Bit 594" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND593 ,Set/Clear Pending Bit 593" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND592 ,Set/Clear Pending Bit 592" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND591 ,Set/Clear Pending Bit 591" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND590 ,Set/Clear Pending Bit 590" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND589 ,Set/Clear Pending Bit 589" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND588 ,Set/Clear Pending Bit 588" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND587 ,Set/Clear Pending Bit 587" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND586 ,Set/Clear Pending Bit 586" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND585 ,Set/Clear Pending Bit 585" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND584 ,Set/Clear Pending Bit 584" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND583 ,Set/Clear Pending Bit 583" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND582 ,Set/Clear Pending Bit 582" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND581 ,Set/Clear Pending Bit 581" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND580 ,Set/Clear Pending Bit 580" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND579 ,Set/Clear Pending Bit 579" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND578 ,Set/Clear Pending Bit 578" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND577 ,Set/Clear Pending Bit 577" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND576 ,Set/Clear Pending Bit 576" "Not pending,Pending" else hgroup.long 0x0248++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) group.long 0x024C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND639 ,Set/Clear Pending Bit 639" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND638 ,Set/Clear Pending Bit 638" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND637 ,Set/Clear Pending Bit 637" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND636 ,Set/Clear Pending Bit 636" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND635 ,Set/Clear Pending Bit 635" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND634 ,Set/Clear Pending Bit 634" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND633 ,Set/Clear Pending Bit 633" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND632 ,Set/Clear Pending Bit 632" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND631 ,Set/Clear Pending Bit 631" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND630 ,Set/Clear Pending Bit 630" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND629 ,Set/Clear Pending Bit 629" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND628 ,Set/Clear Pending Bit 628" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND627 ,Set/Clear Pending Bit 627" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND626 ,Set/Clear Pending Bit 626" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND625 ,Set/Clear Pending Bit 625" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND624 ,Set/Clear Pending Bit 624" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND623 ,Set/Clear Pending Bit 623" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND622 ,Set/Clear Pending Bit 622" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND621 ,Set/Clear Pending Bit 621" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND620 ,Set/Clear Pending Bit 620" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND619 ,Set/Clear Pending Bit 619" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND618 ,Set/Clear Pending Bit 618" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND617 ,Set/Clear Pending Bit 617" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND616 ,Set/Clear Pending Bit 616" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND615 ,Set/Clear Pending Bit 615" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND614 ,Set/Clear Pending Bit 614" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND613 ,Set/Clear Pending Bit 613" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND612 ,Set/Clear Pending Bit 612" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND611 ,Set/Clear Pending Bit 611" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND610 ,Set/Clear Pending Bit 610" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND609 ,Set/Clear Pending Bit 609" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND608 ,Set/Clear Pending Bit 608" "Not pending,Pending" else hgroup.long 0x024C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) group.long 0x0250++0x03 line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND671 ,Set/Clear Pending Bit 671" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND670 ,Set/Clear Pending Bit 670" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND669 ,Set/Clear Pending Bit 669" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND668 ,Set/Clear Pending Bit 668" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND667 ,Set/Clear Pending Bit 667" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND666 ,Set/Clear Pending Bit 666" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND665 ,Set/Clear Pending Bit 665" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND664 ,Set/Clear Pending Bit 664" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND663 ,Set/Clear Pending Bit 663" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND662 ,Set/Clear Pending Bit 662" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND661 ,Set/Clear Pending Bit 661" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND660 ,Set/Clear Pending Bit 660" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND659 ,Set/Clear Pending Bit 659" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND658 ,Set/Clear Pending Bit 658" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND657 ,Set/Clear Pending Bit 657" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND656 ,Set/Clear Pending Bit 656" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND655 ,Set/Clear Pending Bit 655" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND654 ,Set/Clear Pending Bit 654" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND653 ,Set/Clear Pending Bit 653" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND652 ,Set/Clear Pending Bit 652" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND651 ,Set/Clear Pending Bit 651" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND650 ,Set/Clear Pending Bit 650" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND649 ,Set/Clear Pending Bit 649" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND648 ,Set/Clear Pending Bit 648" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND647 ,Set/Clear Pending Bit 647" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND646 ,Set/Clear Pending Bit 646" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND645 ,Set/Clear Pending Bit 645" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND644 ,Set/Clear Pending Bit 644" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND643 ,Set/Clear Pending Bit 643" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND642 ,Set/Clear Pending Bit 642" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND641 ,Set/Clear Pending Bit 641" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND640 ,Set/Clear Pending Bit 640" "Not pending,Pending" else hgroup.long 0x0250++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) group.long 0x0254++0x03 line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND703 ,Set/Clear Pending Bit 703" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND702 ,Set/Clear Pending Bit 702" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND701 ,Set/Clear Pending Bit 701" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND700 ,Set/Clear Pending Bit 700" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND699 ,Set/Clear Pending Bit 699" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND698 ,Set/Clear Pending Bit 698" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND697 ,Set/Clear Pending Bit 697" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND696 ,Set/Clear Pending Bit 696" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND695 ,Set/Clear Pending Bit 695" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND694 ,Set/Clear Pending Bit 694" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND693 ,Set/Clear Pending Bit 693" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND692 ,Set/Clear Pending Bit 692" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND691 ,Set/Clear Pending Bit 691" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND690 ,Set/Clear Pending Bit 690" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND689 ,Set/Clear Pending Bit 689" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND688 ,Set/Clear Pending Bit 688" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND687 ,Set/Clear Pending Bit 687" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND686 ,Set/Clear Pending Bit 686" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND685 ,Set/Clear Pending Bit 685" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND684 ,Set/Clear Pending Bit 684" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND683 ,Set/Clear Pending Bit 683" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND682 ,Set/Clear Pending Bit 682" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND681 ,Set/Clear Pending Bit 681" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND680 ,Set/Clear Pending Bit 680" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND679 ,Set/Clear Pending Bit 679" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND678 ,Set/Clear Pending Bit 678" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND677 ,Set/Clear Pending Bit 677" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND676 ,Set/Clear Pending Bit 676" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND675 ,Set/Clear Pending Bit 675" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND674 ,Set/Clear Pending Bit 674" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND673 ,Set/Clear Pending Bit 673" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND672 ,Set/Clear Pending Bit 672" "Not pending,Pending" else hgroup.long 0x0254++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) group.long 0x0258++0x03 line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND735 ,Set/Clear Pending Bit 735" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND734 ,Set/Clear Pending Bit 734" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND733 ,Set/Clear Pending Bit 733" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND732 ,Set/Clear Pending Bit 732" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND731 ,Set/Clear Pending Bit 731" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND730 ,Set/Clear Pending Bit 730" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND729 ,Set/Clear Pending Bit 729" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND728 ,Set/Clear Pending Bit 728" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND727 ,Set/Clear Pending Bit 727" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND726 ,Set/Clear Pending Bit 726" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND725 ,Set/Clear Pending Bit 725" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND724 ,Set/Clear Pending Bit 724" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND723 ,Set/Clear Pending Bit 723" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND722 ,Set/Clear Pending Bit 722" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND721 ,Set/Clear Pending Bit 721" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND720 ,Set/Clear Pending Bit 720" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND719 ,Set/Clear Pending Bit 719" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND718 ,Set/Clear Pending Bit 718" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND717 ,Set/Clear Pending Bit 717" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND716 ,Set/Clear Pending Bit 716" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND715 ,Set/Clear Pending Bit 715" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND714 ,Set/Clear Pending Bit 714" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND713 ,Set/Clear Pending Bit 713" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND712 ,Set/Clear Pending Bit 712" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND711 ,Set/Clear Pending Bit 711" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND710 ,Set/Clear Pending Bit 710" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND709 ,Set/Clear Pending Bit 709" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND708 ,Set/Clear Pending Bit 708" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND707 ,Set/Clear Pending Bit 707" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND706 ,Set/Clear Pending Bit 706" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND705 ,Set/Clear Pending Bit 705" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND704 ,Set/Clear Pending Bit 704" "Not pending,Pending" else hgroup.long 0x0258++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) group.long 0x025C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND767 ,Set/Clear Pending Bit 767" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND766 ,Set/Clear Pending Bit 766" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND765 ,Set/Clear Pending Bit 765" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND764 ,Set/Clear Pending Bit 764" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND763 ,Set/Clear Pending Bit 763" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND762 ,Set/Clear Pending Bit 762" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND761 ,Set/Clear Pending Bit 761" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND760 ,Set/Clear Pending Bit 760" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND759 ,Set/Clear Pending Bit 759" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND758 ,Set/Clear Pending Bit 758" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND757 ,Set/Clear Pending Bit 757" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND756 ,Set/Clear Pending Bit 756" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND755 ,Set/Clear Pending Bit 755" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND754 ,Set/Clear Pending Bit 754" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND753 ,Set/Clear Pending Bit 753" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND752 ,Set/Clear Pending Bit 752" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND751 ,Set/Clear Pending Bit 751" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND750 ,Set/Clear Pending Bit 750" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND749 ,Set/Clear Pending Bit 749" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND748 ,Set/Clear Pending Bit 748" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND747 ,Set/Clear Pending Bit 747" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND746 ,Set/Clear Pending Bit 746" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND745 ,Set/Clear Pending Bit 745" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND744 ,Set/Clear Pending Bit 744" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND743 ,Set/Clear Pending Bit 743" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND742 ,Set/Clear Pending Bit 742" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND741 ,Set/Clear Pending Bit 741" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND740 ,Set/Clear Pending Bit 740" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND739 ,Set/Clear Pending Bit 739" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND738 ,Set/Clear Pending Bit 738" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND737 ,Set/Clear Pending Bit 737" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND736 ,Set/Clear Pending Bit 736" "Not pending,Pending" else hgroup.long 0x025C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) group.long 0x0260++0x03 line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND799 ,Set/Clear Pending Bit 799" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND798 ,Set/Clear Pending Bit 798" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND797 ,Set/Clear Pending Bit 797" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND796 ,Set/Clear Pending Bit 796" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND795 ,Set/Clear Pending Bit 795" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND794 ,Set/Clear Pending Bit 794" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND793 ,Set/Clear Pending Bit 793" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND792 ,Set/Clear Pending Bit 792" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND791 ,Set/Clear Pending Bit 791" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND790 ,Set/Clear Pending Bit 790" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND789 ,Set/Clear Pending Bit 789" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND788 ,Set/Clear Pending Bit 788" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND787 ,Set/Clear Pending Bit 787" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND786 ,Set/Clear Pending Bit 786" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND785 ,Set/Clear Pending Bit 785" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND784 ,Set/Clear Pending Bit 784" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND783 ,Set/Clear Pending Bit 783" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND782 ,Set/Clear Pending Bit 782" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND781 ,Set/Clear Pending Bit 781" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND780 ,Set/Clear Pending Bit 780" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND779 ,Set/Clear Pending Bit 779" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND778 ,Set/Clear Pending Bit 778" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND777 ,Set/Clear Pending Bit 777" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND776 ,Set/Clear Pending Bit 776" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND775 ,Set/Clear Pending Bit 775" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND774 ,Set/Clear Pending Bit 774" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND773 ,Set/Clear Pending Bit 773" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND772 ,Set/Clear Pending Bit 772" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND771 ,Set/Clear Pending Bit 771" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND770 ,Set/Clear Pending Bit 770" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND769 ,Set/Clear Pending Bit 769" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND768 ,Set/Clear Pending Bit 768" "Not pending,Pending" else hgroup.long 0x0260++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) group.long 0x0264++0x03 line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND831 ,Set/Clear Pending Bit 831" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND830 ,Set/Clear Pending Bit 830" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND829 ,Set/Clear Pending Bit 829" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND828 ,Set/Clear Pending Bit 828" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND827 ,Set/Clear Pending Bit 827" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND826 ,Set/Clear Pending Bit 826" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND825 ,Set/Clear Pending Bit 825" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND824 ,Set/Clear Pending Bit 824" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND823 ,Set/Clear Pending Bit 823" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND822 ,Set/Clear Pending Bit 822" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND821 ,Set/Clear Pending Bit 821" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND820 ,Set/Clear Pending Bit 820" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND819 ,Set/Clear Pending Bit 819" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND818 ,Set/Clear Pending Bit 818" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND817 ,Set/Clear Pending Bit 817" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND816 ,Set/Clear Pending Bit 816" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND815 ,Set/Clear Pending Bit 815" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND814 ,Set/Clear Pending Bit 814" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND813 ,Set/Clear Pending Bit 813" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND812 ,Set/Clear Pending Bit 812" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND811 ,Set/Clear Pending Bit 811" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND810 ,Set/Clear Pending Bit 810" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND809 ,Set/Clear Pending Bit 809" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND808 ,Set/Clear Pending Bit 808" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND807 ,Set/Clear Pending Bit 807" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND806 ,Set/Clear Pending Bit 806" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND805 ,Set/Clear Pending Bit 805" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND804 ,Set/Clear Pending Bit 804" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND803 ,Set/Clear Pending Bit 803" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND802 ,Set/Clear Pending Bit 802" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND801 ,Set/Clear Pending Bit 801" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND800 ,Set/Clear Pending Bit 800" "Not pending,Pending" else hgroup.long 0x0264++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) group.long 0x0268++0x03 line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND863 ,Set/Clear Pending Bit 863" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND862 ,Set/Clear Pending Bit 862" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND861 ,Set/Clear Pending Bit 861" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND860 ,Set/Clear Pending Bit 860" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND859 ,Set/Clear Pending Bit 859" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND858 ,Set/Clear Pending Bit 858" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND857 ,Set/Clear Pending Bit 857" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND856 ,Set/Clear Pending Bit 856" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND855 ,Set/Clear Pending Bit 855" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND854 ,Set/Clear Pending Bit 854" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND853 ,Set/Clear Pending Bit 853" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND852 ,Set/Clear Pending Bit 852" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND851 ,Set/Clear Pending Bit 851" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND850 ,Set/Clear Pending Bit 850" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND849 ,Set/Clear Pending Bit 849" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND848 ,Set/Clear Pending Bit 848" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND847 ,Set/Clear Pending Bit 847" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND846 ,Set/Clear Pending Bit 846" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND845 ,Set/Clear Pending Bit 845" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND844 ,Set/Clear Pending Bit 844" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND843 ,Set/Clear Pending Bit 843" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND842 ,Set/Clear Pending Bit 842" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND841 ,Set/Clear Pending Bit 841" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND840 ,Set/Clear Pending Bit 840" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND839 ,Set/Clear Pending Bit 839" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND838 ,Set/Clear Pending Bit 838" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND837 ,Set/Clear Pending Bit 837" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND836 ,Set/Clear Pending Bit 836" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND835 ,Set/Clear Pending Bit 835" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND834 ,Set/Clear Pending Bit 834" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND833 ,Set/Clear Pending Bit 833" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND832 ,Set/Clear Pending Bit 832" "Not pending,Pending" else hgroup.long 0x0268++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) group.long 0x026C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND895 ,Set/Clear Pending Bit 895" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND894 ,Set/Clear Pending Bit 894" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND893 ,Set/Clear Pending Bit 893" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND892 ,Set/Clear Pending Bit 892" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND891 ,Set/Clear Pending Bit 891" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND890 ,Set/Clear Pending Bit 890" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND889 ,Set/Clear Pending Bit 889" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND888 ,Set/Clear Pending Bit 888" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND887 ,Set/Clear Pending Bit 887" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND886 ,Set/Clear Pending Bit 886" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND885 ,Set/Clear Pending Bit 885" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND884 ,Set/Clear Pending Bit 884" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND883 ,Set/Clear Pending Bit 883" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND882 ,Set/Clear Pending Bit 882" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND881 ,Set/Clear Pending Bit 881" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND880 ,Set/Clear Pending Bit 880" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND879 ,Set/Clear Pending Bit 879" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND878 ,Set/Clear Pending Bit 878" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND877 ,Set/Clear Pending Bit 877" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND876 ,Set/Clear Pending Bit 876" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND875 ,Set/Clear Pending Bit 875" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND874 ,Set/Clear Pending Bit 874" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND873 ,Set/Clear Pending Bit 873" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND872 ,Set/Clear Pending Bit 872" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND871 ,Set/Clear Pending Bit 871" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND870 ,Set/Clear Pending Bit 870" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND869 ,Set/Clear Pending Bit 869" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND868 ,Set/Clear Pending Bit 868" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND867 ,Set/Clear Pending Bit 867" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND866 ,Set/Clear Pending Bit 866" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND865 ,Set/Clear Pending Bit 865" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND864 ,Set/Clear Pending Bit 864" "Not pending,Pending" else hgroup.long 0x026C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) group.long 0x0270++0x03 line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND927 ,Set/Clear Pending Bit 927" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND926 ,Set/Clear Pending Bit 926" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND925 ,Set/Clear Pending Bit 925" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND924 ,Set/Clear Pending Bit 924" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND923 ,Set/Clear Pending Bit 923" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND922 ,Set/Clear Pending Bit 922" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND921 ,Set/Clear Pending Bit 921" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND920 ,Set/Clear Pending Bit 920" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND919 ,Set/Clear Pending Bit 919" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND918 ,Set/Clear Pending Bit 918" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND917 ,Set/Clear Pending Bit 917" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND916 ,Set/Clear Pending Bit 916" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND915 ,Set/Clear Pending Bit 915" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND914 ,Set/Clear Pending Bit 914" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND913 ,Set/Clear Pending Bit 913" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND912 ,Set/Clear Pending Bit 912" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND911 ,Set/Clear Pending Bit 911" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND910 ,Set/Clear Pending Bit 910" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND909 ,Set/Clear Pending Bit 909" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND908 ,Set/Clear Pending Bit 908" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND907 ,Set/Clear Pending Bit 907" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND906 ,Set/Clear Pending Bit 906" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND905 ,Set/Clear Pending Bit 905" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND904 ,Set/Clear Pending Bit 904" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND903 ,Set/Clear Pending Bit 903" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND902 ,Set/Clear Pending Bit 902" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND901 ,Set/Clear Pending Bit 901" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND900 ,Set/Clear Pending Bit 900" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND899 ,Set/Clear Pending Bit 899" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND898 ,Set/Clear Pending Bit 898" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND897 ,Set/Clear Pending Bit 897" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND896 ,Set/Clear Pending Bit 896" "Not pending,Pending" else hgroup.long 0x0270++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) group.long 0x0274++0x03 line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND959 ,Set/Clear Pending Bit 959" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND958 ,Set/Clear Pending Bit 958" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND957 ,Set/Clear Pending Bit 957" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND956 ,Set/Clear Pending Bit 956" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND955 ,Set/Clear Pending Bit 955" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND954 ,Set/Clear Pending Bit 954" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND953 ,Set/Clear Pending Bit 953" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND952 ,Set/Clear Pending Bit 952" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND951 ,Set/Clear Pending Bit 951" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND950 ,Set/Clear Pending Bit 950" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND949 ,Set/Clear Pending Bit 949" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND948 ,Set/Clear Pending Bit 948" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND947 ,Set/Clear Pending Bit 947" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND946 ,Set/Clear Pending Bit 946" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND945 ,Set/Clear Pending Bit 945" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND944 ,Set/Clear Pending Bit 944" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND943 ,Set/Clear Pending Bit 943" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND942 ,Set/Clear Pending Bit 942" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND941 ,Set/Clear Pending Bit 941" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND940 ,Set/Clear Pending Bit 940" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND939 ,Set/Clear Pending Bit 939" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND938 ,Set/Clear Pending Bit 938" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND937 ,Set/Clear Pending Bit 937" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND936 ,Set/Clear Pending Bit 936" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND935 ,Set/Clear Pending Bit 935" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND934 ,Set/Clear Pending Bit 934" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND933 ,Set/Clear Pending Bit 933" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND932 ,Set/Clear Pending Bit 932" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND931 ,Set/Clear Pending Bit 931" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND930 ,Set/Clear Pending Bit 930" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND929 ,Set/Clear Pending Bit 929" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND928 ,Set/Clear Pending Bit 928" "Not pending,Pending" else hgroup.long 0x0274++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) group.long 0x0278++0x03 line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND991 ,Set/Clear Pending Bit 991" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND990 ,Set/Clear Pending Bit 990" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND989 ,Set/Clear Pending Bit 989" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND988 ,Set/Clear Pending Bit 988" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND987 ,Set/Clear Pending Bit 987" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND986 ,Set/Clear Pending Bit 986" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND985 ,Set/Clear Pending Bit 985" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND984 ,Set/Clear Pending Bit 984" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND983 ,Set/Clear Pending Bit 983" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND982 ,Set/Clear Pending Bit 982" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND981 ,Set/Clear Pending Bit 981" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND980 ,Set/Clear Pending Bit 980" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND979 ,Set/Clear Pending Bit 979" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND978 ,Set/Clear Pending Bit 978" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND977 ,Set/Clear Pending Bit 977" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND976 ,Set/Clear Pending Bit 976" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND975 ,Set/Clear Pending Bit 975" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND974 ,Set/Clear Pending Bit 974" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND973 ,Set/Clear Pending Bit 973" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND972 ,Set/Clear Pending Bit 972" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND971 ,Set/Clear Pending Bit 971" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND970 ,Set/Clear Pending Bit 970" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND969 ,Set/Clear Pending Bit 969" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND968 ,Set/Clear Pending Bit 968" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND967 ,Set/Clear Pending Bit 967" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND966 ,Set/Clear Pending Bit 966" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND965 ,Set/Clear Pending Bit 965" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND964 ,Set/Clear Pending Bit 964" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND963 ,Set/Clear Pending Bit 963" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND962 ,Set/Clear Pending Bit 962" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND961 ,Set/Clear Pending Bit 961" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND960 ,Set/Clear Pending Bit 960" "Not pending,Pending" else hgroup.long 0x0278++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" endif tree.end width 24. tree "Set/Clear Active Registers" if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10) hgroup.long 0x0300++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0" newline newline newline newline newline newline newline newline newline newline else group.long 0x0300++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE31 ,Set/Clear Active Bit 31" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE30 ,Set/Clear Active Bit 30" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE29 ,Set/Clear Active Bit 29" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE28 ,Set/Clear Active Bit 28" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE27 ,Set/Clear Active Bit 27" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE26 ,Set/Clear Active Bit 26" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE25 ,Set/Clear Active Bit 25" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE24 ,Set/Clear Active Bit 24" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE23 ,Set/Clear Active Bit 23" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE22 ,Set/Clear Active Bit 22" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE21 ,Set/Clear Active Bit 21" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE20 ,Set/Clear Active Bit 20" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE19 ,Set/Clear Active Bit 19" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE18 ,Set/Clear Active Bit 18" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE17 ,Set/Clear Active Bit 17" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE16 ,Set/Clear Active Bit 16" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE15 ,Set/Clear Active Bit 15" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE14 ,Set/Clear Active Bit 14" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE13 ,Set/Clear Active Bit 13" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE12 ,Set/Clear Active Bit 12" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE11 ,Set/Clear Active Bit 11" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE10 ,Set/Clear Active Bit 10" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE9 ,Set/Clear Active Bit 9" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE8 ,Set/Clear Active Bit 8" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE7 ,Set/Clear Active Bit 7" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE6 ,Set/Clear Active Bit 6" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE5 ,Set/Clear Active Bit 5" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE4 ,Set/Clear Active Bit 4" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE3 ,Set/Clear Active Bit 3" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE2 ,Set/Clear Active Bit 2" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE1 ,Set/Clear Active Bit 1" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE0 ,Set/Clear Active Bit 0" "Not active,Active" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01) group.long 0x0304++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE63 ,Set/Clear Active Bit 63" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE62 ,Set/Clear Active Bit 62" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE61 ,Set/Clear Active Bit 61" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE60 ,Set/Clear Active Bit 60" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE59 ,Set/Clear Active Bit 59" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE58 ,Set/Clear Active Bit 58" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE57 ,Set/Clear Active Bit 57" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE56 ,Set/Clear Active Bit 56" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE55 ,Set/Clear Active Bit 55" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE54 ,Set/Clear Active Bit 54" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE53 ,Set/Clear Active Bit 53" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE52 ,Set/Clear Active Bit 52" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE51 ,Set/Clear Active Bit 51" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE50 ,Set/Clear Active Bit 50" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE49 ,Set/Clear Active Bit 49" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE48 ,Set/Clear Active Bit 48" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE47 ,Set/Clear Active Bit 47" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE46 ,Set/Clear Active Bit 46" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE45 ,Set/Clear Active Bit 45" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE44 ,Set/Clear Active Bit 44" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE43 ,Set/Clear Active Bit 43" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE42 ,Set/Clear Active Bit 42" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE41 ,Set/Clear Active Bit 41" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE40 ,Set/Clear Active Bit 40" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE39 ,Set/Clear Active Bit 39" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE38 ,Set/Clear Active Bit 38" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE37 ,Set/Clear Active Bit 37" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE36 ,Set/Clear Active Bit 36" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE35 ,Set/Clear Active Bit 35" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE34 ,Set/Clear Active Bit 34" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE33 ,Set/Clear Active Bit 33" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE32 ,Set/Clear Active Bit 32" "Not active,Active" else hgroup.long 0x0304++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02) group.long 0x0308++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE95 ,Set/Clear Active Bit 95" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE94 ,Set/Clear Active Bit 94" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE93 ,Set/Clear Active Bit 93" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE92 ,Set/Clear Active Bit 92" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE91 ,Set/Clear Active Bit 91" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE90 ,Set/Clear Active Bit 90" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE89 ,Set/Clear Active Bit 89" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE88 ,Set/Clear Active Bit 88" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE87 ,Set/Clear Active Bit 87" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE86 ,Set/Clear Active Bit 86" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE85 ,Set/Clear Active Bit 85" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE84 ,Set/Clear Active Bit 84" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE83 ,Set/Clear Active Bit 83" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE82 ,Set/Clear Active Bit 82" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE81 ,Set/Clear Active Bit 81" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE80 ,Set/Clear Active Bit 80" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE79 ,Set/Clear Active Bit 79" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE78 ,Set/Clear Active Bit 78" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE77 ,Set/Clear Active Bit 77" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE76 ,Set/Clear Active Bit 76" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE75 ,Set/Clear Active Bit 75" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE74 ,Set/Clear Active Bit 74" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE73 ,Set/Clear Active Bit 73" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE72 ,Set/Clear Active Bit 72" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE71 ,Set/Clear Active Bit 71" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE70 ,Set/Clear Active Bit 70" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE69 ,Set/Clear Active Bit 69" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE68 ,Set/Clear Active Bit 68" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE67 ,Set/Clear Active Bit 67" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE66 ,Set/Clear Active Bit 66" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE65 ,Set/Clear Active Bit 65" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE64 ,Set/Clear Active Bit 64" "Not active,Active" else hgroup.long 0x0308++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03) group.long 0x030C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE127 ,Set/Clear Active Bit 127" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE126 ,Set/Clear Active Bit 126" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE125 ,Set/Clear Active Bit 125" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE124 ,Set/Clear Active Bit 124" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE123 ,Set/Clear Active Bit 123" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE122 ,Set/Clear Active Bit 122" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE121 ,Set/Clear Active Bit 121" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE120 ,Set/Clear Active Bit 120" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE119 ,Set/Clear Active Bit 119" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE118 ,Set/Clear Active Bit 118" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE117 ,Set/Clear Active Bit 117" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE116 ,Set/Clear Active Bit 116" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE115 ,Set/Clear Active Bit 115" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE114 ,Set/Clear Active Bit 114" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE113 ,Set/Clear Active Bit 113" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE112 ,Set/Clear Active Bit 112" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE111 ,Set/Clear Active Bit 111" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE110 ,Set/Clear Active Bit 110" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE109 ,Set/Clear Active Bit 109" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE108 ,Set/Clear Active Bit 108" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE107 ,Set/Clear Active Bit 107" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE106 ,Set/Clear Active Bit 106" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE105 ,Set/Clear Active Bit 105" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE104 ,Set/Clear Active Bit 104" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE103 ,Set/Clear Active Bit 103" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE102 ,Set/Clear Active Bit 102" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE101 ,Set/Clear Active Bit 101" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE100 ,Set/Clear Active Bit 100" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE99 ,Set/Clear Active Bit 99" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE98 ,Set/Clear Active Bit 98" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE97 ,Set/Clear Active Bit 97" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE96 ,Set/Clear Active Bit 96" "Not active,Active" else hgroup.long 0x030C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04) group.long 0x0310++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE159 ,Set/Clear Active Bit 159" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE158 ,Set/Clear Active Bit 158" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE157 ,Set/Clear Active Bit 157" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE156 ,Set/Clear Active Bit 156" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE155 ,Set/Clear Active Bit 155" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE154 ,Set/Clear Active Bit 154" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE153 ,Set/Clear Active Bit 153" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE152 ,Set/Clear Active Bit 152" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE151 ,Set/Clear Active Bit 151" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE150 ,Set/Clear Active Bit 150" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE149 ,Set/Clear Active Bit 149" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE148 ,Set/Clear Active Bit 148" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE147 ,Set/Clear Active Bit 147" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE146 ,Set/Clear Active Bit 146" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE145 ,Set/Clear Active Bit 145" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE144 ,Set/Clear Active Bit 144" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE143 ,Set/Clear Active Bit 143" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE142 ,Set/Clear Active Bit 142" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE141 ,Set/Clear Active Bit 141" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE140 ,Set/Clear Active Bit 140" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE139 ,Set/Clear Active Bit 139" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE138 ,Set/Clear Active Bit 138" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE137 ,Set/Clear Active Bit 137" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE136 ,Set/Clear Active Bit 136" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE135 ,Set/Clear Active Bit 135" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE134 ,Set/Clear Active Bit 134" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE133 ,Set/Clear Active Bit 133" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE132 ,Set/Clear Active Bit 132" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE131 ,Set/Clear Active Bit 131" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE130 ,Set/Clear Active Bit 130" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE129 ,Set/Clear Active Bit 129" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE128 ,Set/Clear Active Bit 128" "Not active,Active" else hgroup.long 0x0310++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05) group.long 0x0314++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE191 ,Set/Clear Active Bit 191" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE190 ,Set/Clear Active Bit 190" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE189 ,Set/Clear Active Bit 189" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE188 ,Set/Clear Active Bit 188" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE187 ,Set/Clear Active Bit 187" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE186 ,Set/Clear Active Bit 186" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE185 ,Set/Clear Active Bit 185" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE184 ,Set/Clear Active Bit 184" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE183 ,Set/Clear Active Bit 183" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE182 ,Set/Clear Active Bit 182" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE181 ,Set/Clear Active Bit 181" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE180 ,Set/Clear Active Bit 180" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE179 ,Set/Clear Active Bit 179" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE178 ,Set/Clear Active Bit 178" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE177 ,Set/Clear Active Bit 177" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE176 ,Set/Clear Active Bit 176" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE175 ,Set/Clear Active Bit 175" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE174 ,Set/Clear Active Bit 174" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE173 ,Set/Clear Active Bit 173" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE172 ,Set/Clear Active Bit 172" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE171 ,Set/Clear Active Bit 171" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE170 ,Set/Clear Active Bit 170" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE169 ,Set/Clear Active Bit 169" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE168 ,Set/Clear Active Bit 168" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE167 ,Set/Clear Active Bit 167" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE166 ,Set/Clear Active Bit 166" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE165 ,Set/Clear Active Bit 165" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE164 ,Set/Clear Active Bit 164" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE163 ,Set/Clear Active Bit 163" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE162 ,Set/Clear Active Bit 162" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE161 ,Set/Clear Active Bit 161" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE160 ,Set/Clear Active Bit 160" "Not active,Active" else hgroup.long 0x0314++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06) group.long 0x0318++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE223 ,Set/Clear Active Bit 223" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE222 ,Set/Clear Active Bit 222" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE221 ,Set/Clear Active Bit 221" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE220 ,Set/Clear Active Bit 220" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE219 ,Set/Clear Active Bit 219" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE218 ,Set/Clear Active Bit 218" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE217 ,Set/Clear Active Bit 217" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE216 ,Set/Clear Active Bit 216" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE215 ,Set/Clear Active Bit 215" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE214 ,Set/Clear Active Bit 214" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE213 ,Set/Clear Active Bit 213" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE212 ,Set/Clear Active Bit 212" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE211 ,Set/Clear Active Bit 211" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE210 ,Set/Clear Active Bit 210" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE209 ,Set/Clear Active Bit 209" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE208 ,Set/Clear Active Bit 208" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE207 ,Set/Clear Active Bit 207" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE206 ,Set/Clear Active Bit 206" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE205 ,Set/Clear Active Bit 205" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE204 ,Set/Clear Active Bit 204" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE203 ,Set/Clear Active Bit 203" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE202 ,Set/Clear Active Bit 202" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE201 ,Set/Clear Active Bit 201" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE200 ,Set/Clear Active Bit 200" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE199 ,Set/Clear Active Bit 199" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE198 ,Set/Clear Active Bit 198" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE197 ,Set/Clear Active Bit 197" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE196 ,Set/Clear Active Bit 196" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE195 ,Set/Clear Active Bit 195" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE194 ,Set/Clear Active Bit 194" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE193 ,Set/Clear Active Bit 193" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE192 ,Set/Clear Active Bit 192" "Not active,Active" else hgroup.long 0x0318++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07) group.long 0x031C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE255 ,Set/Clear Active Bit 255" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE254 ,Set/Clear Active Bit 254" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE253 ,Set/Clear Active Bit 253" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE252 ,Set/Clear Active Bit 252" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE251 ,Set/Clear Active Bit 251" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE250 ,Set/Clear Active Bit 250" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE249 ,Set/Clear Active Bit 249" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE248 ,Set/Clear Active Bit 248" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE247 ,Set/Clear Active Bit 247" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE246 ,Set/Clear Active Bit 246" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE245 ,Set/Clear Active Bit 245" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE244 ,Set/Clear Active Bit 244" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE243 ,Set/Clear Active Bit 243" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE242 ,Set/Clear Active Bit 242" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE241 ,Set/Clear Active Bit 241" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE240 ,Set/Clear Active Bit 240" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE239 ,Set/Clear Active Bit 239" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE238 ,Set/Clear Active Bit 238" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE237 ,Set/Clear Active Bit 237" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE236 ,Set/Clear Active Bit 236" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE235 ,Set/Clear Active Bit 235" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE234 ,Set/Clear Active Bit 234" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE233 ,Set/Clear Active Bit 233" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE232 ,Set/Clear Active Bit 232" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE231 ,Set/Clear Active Bit 231" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE230 ,Set/Clear Active Bit 230" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE229 ,Set/Clear Active Bit 229" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE228 ,Set/Clear Active Bit 228" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE227 ,Set/Clear Active Bit 227" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE226 ,Set/Clear Active Bit 226" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE225 ,Set/Clear Active Bit 225" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE224 ,Set/Clear Active Bit 224" "Not active,Active" else hgroup.long 0x031C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08) group.long 0x0320++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE287 ,Set/Clear Active Bit 287" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE286 ,Set/Clear Active Bit 286" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE285 ,Set/Clear Active Bit 285" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE284 ,Set/Clear Active Bit 284" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE283 ,Set/Clear Active Bit 283" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE282 ,Set/Clear Active Bit 282" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE281 ,Set/Clear Active Bit 281" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE280 ,Set/Clear Active Bit 280" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE279 ,Set/Clear Active Bit 279" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE278 ,Set/Clear Active Bit 278" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE277 ,Set/Clear Active Bit 277" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE276 ,Set/Clear Active Bit 276" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE275 ,Set/Clear Active Bit 275" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE274 ,Set/Clear Active Bit 274" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE273 ,Set/Clear Active Bit 273" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE272 ,Set/Clear Active Bit 272" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE271 ,Set/Clear Active Bit 271" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE270 ,Set/Clear Active Bit 270" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE269 ,Set/Clear Active Bit 269" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE268 ,Set/Clear Active Bit 268" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE267 ,Set/Clear Active Bit 267" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE266 ,Set/Clear Active Bit 266" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE265 ,Set/Clear Active Bit 265" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE264 ,Set/Clear Active Bit 264" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE263 ,Set/Clear Active Bit 263" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE262 ,Set/Clear Active Bit 262" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE261 ,Set/Clear Active Bit 261" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE260 ,Set/Clear Active Bit 260" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE259 ,Set/Clear Active Bit 259" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE258 ,Set/Clear Active Bit 258" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE257 ,Set/Clear Active Bit 257" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE256 ,Set/Clear Active Bit 256" "Not active,Active" else hgroup.long 0x0320++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09) group.long 0x0324++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE319 ,Set/Clear Active Bit 319" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE318 ,Set/Clear Active Bit 318" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE317 ,Set/Clear Active Bit 317" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE316 ,Set/Clear Active Bit 316" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE315 ,Set/Clear Active Bit 315" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE314 ,Set/Clear Active Bit 314" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE313 ,Set/Clear Active Bit 313" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE312 ,Set/Clear Active Bit 312" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE311 ,Set/Clear Active Bit 311" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE310 ,Set/Clear Active Bit 310" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE309 ,Set/Clear Active Bit 309" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE308 ,Set/Clear Active Bit 308" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE307 ,Set/Clear Active Bit 307" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE306 ,Set/Clear Active Bit 306" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE305 ,Set/Clear Active Bit 305" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE304 ,Set/Clear Active Bit 304" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE303 ,Set/Clear Active Bit 303" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE302 ,Set/Clear Active Bit 302" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE301 ,Set/Clear Active Bit 301" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE300 ,Set/Clear Active Bit 300" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE299 ,Set/Clear Active Bit 299" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE298 ,Set/Clear Active Bit 298" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE297 ,Set/Clear Active Bit 297" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE296 ,Set/Clear Active Bit 296" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE295 ,Set/Clear Active Bit 295" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE294 ,Set/Clear Active Bit 294" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE293 ,Set/Clear Active Bit 293" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE292 ,Set/Clear Active Bit 292" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE291 ,Set/Clear Active Bit 291" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE290 ,Set/Clear Active Bit 290" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE289 ,Set/Clear Active Bit 289" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE288 ,Set/Clear Active Bit 288" "Not active,Active" else hgroup.long 0x0324++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A) group.long 0x0328++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE351 ,Set/Clear Active Bit 351" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE350 ,Set/Clear Active Bit 350" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE349 ,Set/Clear Active Bit 349" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE348 ,Set/Clear Active Bit 348" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE347 ,Set/Clear Active Bit 347" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE346 ,Set/Clear Active Bit 346" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE345 ,Set/Clear Active Bit 345" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE344 ,Set/Clear Active Bit 344" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE343 ,Set/Clear Active Bit 343" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE342 ,Set/Clear Active Bit 342" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE341 ,Set/Clear Active Bit 341" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE340 ,Set/Clear Active Bit 340" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE339 ,Set/Clear Active Bit 339" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE338 ,Set/Clear Active Bit 338" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE337 ,Set/Clear Active Bit 337" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE336 ,Set/Clear Active Bit 336" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE335 ,Set/Clear Active Bit 335" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE334 ,Set/Clear Active Bit 334" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE333 ,Set/Clear Active Bit 333" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE332 ,Set/Clear Active Bit 332" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE331 ,Set/Clear Active Bit 331" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE330 ,Set/Clear Active Bit 330" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE329 ,Set/Clear Active Bit 329" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE328 ,Set/Clear Active Bit 328" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE327 ,Set/Clear Active Bit 327" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE326 ,Set/Clear Active Bit 326" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE325 ,Set/Clear Active Bit 325" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE324 ,Set/Clear Active Bit 324" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE323 ,Set/Clear Active Bit 323" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE322 ,Set/Clear Active Bit 322" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE321 ,Set/Clear Active Bit 321" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE320 ,Set/Clear Active Bit 320" "Not active,Active" else hgroup.long 0x0328++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B) group.long 0x032C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE383 ,Set/Clear Active Bit 383" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE382 ,Set/Clear Active Bit 382" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE381 ,Set/Clear Active Bit 381" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE380 ,Set/Clear Active Bit 380" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE379 ,Set/Clear Active Bit 379" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE378 ,Set/Clear Active Bit 378" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE377 ,Set/Clear Active Bit 377" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE376 ,Set/Clear Active Bit 376" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE375 ,Set/Clear Active Bit 375" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE374 ,Set/Clear Active Bit 374" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE373 ,Set/Clear Active Bit 373" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE372 ,Set/Clear Active Bit 372" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE371 ,Set/Clear Active Bit 371" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE370 ,Set/Clear Active Bit 370" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE369 ,Set/Clear Active Bit 369" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE368 ,Set/Clear Active Bit 368" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE367 ,Set/Clear Active Bit 367" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE366 ,Set/Clear Active Bit 366" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE365 ,Set/Clear Active Bit 365" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE364 ,Set/Clear Active Bit 364" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE363 ,Set/Clear Active Bit 363" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE362 ,Set/Clear Active Bit 362" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE361 ,Set/Clear Active Bit 361" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE360 ,Set/Clear Active Bit 360" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE359 ,Set/Clear Active Bit 359" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE358 ,Set/Clear Active Bit 358" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE357 ,Set/Clear Active Bit 357" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE356 ,Set/Clear Active Bit 356" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE355 ,Set/Clear Active Bit 355" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE354 ,Set/Clear Active Bit 354" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE353 ,Set/Clear Active Bit 353" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE352 ,Set/Clear Active Bit 352" "Not active,Active" else hgroup.long 0x032C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C) group.long 0x0330++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE415 ,Set/Clear Active Bit 415" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE414 ,Set/Clear Active Bit 414" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE413 ,Set/Clear Active Bit 413" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE412 ,Set/Clear Active Bit 412" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE411 ,Set/Clear Active Bit 411" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE410 ,Set/Clear Active Bit 410" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE409 ,Set/Clear Active Bit 409" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE408 ,Set/Clear Active Bit 408" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE407 ,Set/Clear Active Bit 407" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE406 ,Set/Clear Active Bit 406" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE405 ,Set/Clear Active Bit 405" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE404 ,Set/Clear Active Bit 404" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE403 ,Set/Clear Active Bit 403" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE402 ,Set/Clear Active Bit 402" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE401 ,Set/Clear Active Bit 401" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE400 ,Set/Clear Active Bit 400" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE399 ,Set/Clear Active Bit 399" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE398 ,Set/Clear Active Bit 398" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE397 ,Set/Clear Active Bit 397" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE396 ,Set/Clear Active Bit 396" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE395 ,Set/Clear Active Bit 395" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE394 ,Set/Clear Active Bit 394" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE393 ,Set/Clear Active Bit 393" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE392 ,Set/Clear Active Bit 392" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE391 ,Set/Clear Active Bit 391" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE390 ,Set/Clear Active Bit 390" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE389 ,Set/Clear Active Bit 389" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE388 ,Set/Clear Active Bit 388" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE387 ,Set/Clear Active Bit 387" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE386 ,Set/Clear Active Bit 386" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE385 ,Set/Clear Active Bit 385" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE384 ,Set/Clear Active Bit 384" "Not active,Active" else hgroup.long 0x0330++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D) group.long 0x0334++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE447 ,Set/Clear Active Bit 447" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE446 ,Set/Clear Active Bit 446" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE445 ,Set/Clear Active Bit 445" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE444 ,Set/Clear Active Bit 444" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE443 ,Set/Clear Active Bit 443" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE442 ,Set/Clear Active Bit 442" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE441 ,Set/Clear Active Bit 441" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE440 ,Set/Clear Active Bit 440" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE439 ,Set/Clear Active Bit 439" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE438 ,Set/Clear Active Bit 438" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE437 ,Set/Clear Active Bit 437" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE436 ,Set/Clear Active Bit 436" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE435 ,Set/Clear Active Bit 435" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE434 ,Set/Clear Active Bit 434" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE433 ,Set/Clear Active Bit 433" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE432 ,Set/Clear Active Bit 432" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE431 ,Set/Clear Active Bit 431" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE430 ,Set/Clear Active Bit 430" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE429 ,Set/Clear Active Bit 429" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE428 ,Set/Clear Active Bit 428" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE427 ,Set/Clear Active Bit 427" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE426 ,Set/Clear Active Bit 426" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE425 ,Set/Clear Active Bit 425" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE424 ,Set/Clear Active Bit 424" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE423 ,Set/Clear Active Bit 423" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE422 ,Set/Clear Active Bit 422" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE421 ,Set/Clear Active Bit 421" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE420 ,Set/Clear Active Bit 420" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE419 ,Set/Clear Active Bit 419" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE418 ,Set/Clear Active Bit 418" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE417 ,Set/Clear Active Bit 417" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE416 ,Set/Clear Active Bit 416" "Not active,Active" else hgroup.long 0x0334++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E) group.long 0x0338++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE479 ,Set/Clear Active Bit 479" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE478 ,Set/Clear Active Bit 478" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE477 ,Set/Clear Active Bit 477" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE476 ,Set/Clear Active Bit 476" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE475 ,Set/Clear Active Bit 475" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE474 ,Set/Clear Active Bit 474" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE473 ,Set/Clear Active Bit 473" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE472 ,Set/Clear Active Bit 472" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE471 ,Set/Clear Active Bit 471" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE470 ,Set/Clear Active Bit 470" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE469 ,Set/Clear Active Bit 469" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE468 ,Set/Clear Active Bit 468" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE467 ,Set/Clear Active Bit 467" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE466 ,Set/Clear Active Bit 466" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE465 ,Set/Clear Active Bit 465" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE464 ,Set/Clear Active Bit 464" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE463 ,Set/Clear Active Bit 463" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE462 ,Set/Clear Active Bit 462" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE461 ,Set/Clear Active Bit 461" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE460 ,Set/Clear Active Bit 460" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE459 ,Set/Clear Active Bit 459" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE458 ,Set/Clear Active Bit 458" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE457 ,Set/Clear Active Bit 457" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE456 ,Set/Clear Active Bit 456" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE455 ,Set/Clear Active Bit 455" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE454 ,Set/Clear Active Bit 454" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE453 ,Set/Clear Active Bit 453" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE452 ,Set/Clear Active Bit 452" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE451 ,Set/Clear Active Bit 451" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE450 ,Set/Clear Active Bit 450" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE449 ,Set/Clear Active Bit 449" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE448 ,Set/Clear Active Bit 448" "Not active,Active" else hgroup.long 0x0338++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F) group.long 0x033C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE511 ,Set/Clear Active Bit 511" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE510 ,Set/Clear Active Bit 510" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE509 ,Set/Clear Active Bit 509" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE508 ,Set/Clear Active Bit 508" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE507 ,Set/Clear Active Bit 507" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE506 ,Set/Clear Active Bit 506" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE505 ,Set/Clear Active Bit 505" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE504 ,Set/Clear Active Bit 504" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE503 ,Set/Clear Active Bit 503" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE502 ,Set/Clear Active Bit 502" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE501 ,Set/Clear Active Bit 501" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE500 ,Set/Clear Active Bit 500" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE499 ,Set/Clear Active Bit 499" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE498 ,Set/Clear Active Bit 498" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE497 ,Set/Clear Active Bit 497" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE496 ,Set/Clear Active Bit 496" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE495 ,Set/Clear Active Bit 495" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE494 ,Set/Clear Active Bit 494" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE493 ,Set/Clear Active Bit 493" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE492 ,Set/Clear Active Bit 492" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE491 ,Set/Clear Active Bit 491" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE490 ,Set/Clear Active Bit 490" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE489 ,Set/Clear Active Bit 489" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE488 ,Set/Clear Active Bit 488" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE487 ,Set/Clear Active Bit 487" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE486 ,Set/Clear Active Bit 486" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE485 ,Set/Clear Active Bit 485" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE484 ,Set/Clear Active Bit 484" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE483 ,Set/Clear Active Bit 483" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE482 ,Set/Clear Active Bit 482" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE481 ,Set/Clear Active Bit 481" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE480 ,Set/Clear Active Bit 480" "Not active,Active" else hgroup.long 0x033C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) group.long 0x0340++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER16,Interrupt Set/Clear Active Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE543 ,Set/Clear Active Bit 543" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE542 ,Set/Clear Active Bit 542" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE541 ,Set/Clear Active Bit 541" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE540 ,Set/Clear Active Bit 540" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE539 ,Set/Clear Active Bit 539" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE538 ,Set/Clear Active Bit 538" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE537 ,Set/Clear Active Bit 537" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE536 ,Set/Clear Active Bit 536" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE535 ,Set/Clear Active Bit 535" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE534 ,Set/Clear Active Bit 534" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE533 ,Set/Clear Active Bit 533" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE532 ,Set/Clear Active Bit 532" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE531 ,Set/Clear Active Bit 531" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE530 ,Set/Clear Active Bit 530" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE529 ,Set/Clear Active Bit 529" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE528 ,Set/Clear Active Bit 528" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE527 ,Set/Clear Active Bit 527" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE526 ,Set/Clear Active Bit 526" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE525 ,Set/Clear Active Bit 525" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE524 ,Set/Clear Active Bit 524" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE523 ,Set/Clear Active Bit 523" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE522 ,Set/Clear Active Bit 522" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE521 ,Set/Clear Active Bit 521" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE520 ,Set/Clear Active Bit 520" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE519 ,Set/Clear Active Bit 519" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE518 ,Set/Clear Active Bit 518" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE517 ,Set/Clear Active Bit 517" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE516 ,Set/Clear Active Bit 516" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE515 ,Set/Clear Active Bit 515" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE514 ,Set/Clear Active Bit 514" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE513 ,Set/Clear Active Bit 513" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE512 ,Set/Clear Active Bit 512" "Not active,Active" else hgroup.long 0x0340++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER16,Interrupt Set/Clear Active Register 16" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) group.long 0x0344++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER17,Interrupt Set/Clear Active Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE575 ,Set/Clear Active Bit 575" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE574 ,Set/Clear Active Bit 574" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE573 ,Set/Clear Active Bit 573" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE572 ,Set/Clear Active Bit 572" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE571 ,Set/Clear Active Bit 571" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE570 ,Set/Clear Active Bit 570" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE569 ,Set/Clear Active Bit 569" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE568 ,Set/Clear Active Bit 568" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE567 ,Set/Clear Active Bit 567" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE566 ,Set/Clear Active Bit 566" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE565 ,Set/Clear Active Bit 565" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE564 ,Set/Clear Active Bit 564" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE563 ,Set/Clear Active Bit 563" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE562 ,Set/Clear Active Bit 562" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE561 ,Set/Clear Active Bit 561" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE560 ,Set/Clear Active Bit 560" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE559 ,Set/Clear Active Bit 559" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE558 ,Set/Clear Active Bit 558" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE557 ,Set/Clear Active Bit 557" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE556 ,Set/Clear Active Bit 556" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE555 ,Set/Clear Active Bit 555" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE554 ,Set/Clear Active Bit 554" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE553 ,Set/Clear Active Bit 553" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE552 ,Set/Clear Active Bit 552" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE551 ,Set/Clear Active Bit 551" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE550 ,Set/Clear Active Bit 550" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE549 ,Set/Clear Active Bit 549" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE548 ,Set/Clear Active Bit 548" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE547 ,Set/Clear Active Bit 547" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE546 ,Set/Clear Active Bit 546" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE545 ,Set/Clear Active Bit 545" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE544 ,Set/Clear Active Bit 544" "Not active,Active" else hgroup.long 0x0344++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER17,Interrupt Set/Clear Active Register 17" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) group.long 0x0348++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER18,Interrupt Set/Clear Active Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE607 ,Set/Clear Active Bit 607" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE606 ,Set/Clear Active Bit 606" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE605 ,Set/Clear Active Bit 605" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE604 ,Set/Clear Active Bit 604" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE603 ,Set/Clear Active Bit 603" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE602 ,Set/Clear Active Bit 602" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE601 ,Set/Clear Active Bit 601" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE600 ,Set/Clear Active Bit 600" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE599 ,Set/Clear Active Bit 599" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE598 ,Set/Clear Active Bit 598" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE597 ,Set/Clear Active Bit 597" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE596 ,Set/Clear Active Bit 596" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE595 ,Set/Clear Active Bit 595" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE594 ,Set/Clear Active Bit 594" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE593 ,Set/Clear Active Bit 593" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE592 ,Set/Clear Active Bit 592" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE591 ,Set/Clear Active Bit 591" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE590 ,Set/Clear Active Bit 590" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE589 ,Set/Clear Active Bit 589" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE588 ,Set/Clear Active Bit 588" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE587 ,Set/Clear Active Bit 587" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE586 ,Set/Clear Active Bit 586" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE585 ,Set/Clear Active Bit 585" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE584 ,Set/Clear Active Bit 584" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE583 ,Set/Clear Active Bit 583" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE582 ,Set/Clear Active Bit 582" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE581 ,Set/Clear Active Bit 581" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE580 ,Set/Clear Active Bit 580" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE579 ,Set/Clear Active Bit 579" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE578 ,Set/Clear Active Bit 578" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE577 ,Set/Clear Active Bit 577" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE576 ,Set/Clear Active Bit 576" "Not active,Active" else hgroup.long 0x0348++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER18,Interrupt Set/Clear Active Register 18" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) group.long 0x034C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER19,Interrupt Set/Clear Active Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE639 ,Set/Clear Active Bit 639" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE638 ,Set/Clear Active Bit 638" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE637 ,Set/Clear Active Bit 637" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE636 ,Set/Clear Active Bit 636" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE635 ,Set/Clear Active Bit 635" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE634 ,Set/Clear Active Bit 634" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE633 ,Set/Clear Active Bit 633" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE632 ,Set/Clear Active Bit 632" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE631 ,Set/Clear Active Bit 631" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE630 ,Set/Clear Active Bit 630" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE629 ,Set/Clear Active Bit 629" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE628 ,Set/Clear Active Bit 628" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE627 ,Set/Clear Active Bit 627" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE626 ,Set/Clear Active Bit 626" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE625 ,Set/Clear Active Bit 625" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE624 ,Set/Clear Active Bit 624" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE623 ,Set/Clear Active Bit 623" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE622 ,Set/Clear Active Bit 622" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE621 ,Set/Clear Active Bit 621" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE620 ,Set/Clear Active Bit 620" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE619 ,Set/Clear Active Bit 619" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE618 ,Set/Clear Active Bit 618" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE617 ,Set/Clear Active Bit 617" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE616 ,Set/Clear Active Bit 616" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE615 ,Set/Clear Active Bit 615" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE614 ,Set/Clear Active Bit 614" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE613 ,Set/Clear Active Bit 613" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE612 ,Set/Clear Active Bit 612" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE611 ,Set/Clear Active Bit 611" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE610 ,Set/Clear Active Bit 610" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE609 ,Set/Clear Active Bit 609" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE608 ,Set/Clear Active Bit 608" "Not active,Active" else hgroup.long 0x034C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER19,Interrupt Set/Clear Active Register 19" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) group.long 0x0350++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER20,Interrupt Set/Clear Active Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE671 ,Set/Clear Active Bit 671" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE670 ,Set/Clear Active Bit 670" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE669 ,Set/Clear Active Bit 669" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE668 ,Set/Clear Active Bit 668" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE667 ,Set/Clear Active Bit 667" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE666 ,Set/Clear Active Bit 666" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE665 ,Set/Clear Active Bit 665" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE664 ,Set/Clear Active Bit 664" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE663 ,Set/Clear Active Bit 663" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE662 ,Set/Clear Active Bit 662" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE661 ,Set/Clear Active Bit 661" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE660 ,Set/Clear Active Bit 660" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE659 ,Set/Clear Active Bit 659" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE658 ,Set/Clear Active Bit 658" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE657 ,Set/Clear Active Bit 657" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE656 ,Set/Clear Active Bit 656" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE655 ,Set/Clear Active Bit 655" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE654 ,Set/Clear Active Bit 654" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE653 ,Set/Clear Active Bit 653" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE652 ,Set/Clear Active Bit 652" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE651 ,Set/Clear Active Bit 651" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE650 ,Set/Clear Active Bit 650" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE649 ,Set/Clear Active Bit 649" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE648 ,Set/Clear Active Bit 648" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE647 ,Set/Clear Active Bit 647" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE646 ,Set/Clear Active Bit 646" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE645 ,Set/Clear Active Bit 645" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE644 ,Set/Clear Active Bit 644" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE643 ,Set/Clear Active Bit 643" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE642 ,Set/Clear Active Bit 642" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE641 ,Set/Clear Active Bit 641" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE640 ,Set/Clear Active Bit 640" "Not active,Active" else hgroup.long 0x0350++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER20,Interrupt Set/Clear Active Register 20" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) group.long 0x0354++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER21,Interrupt Set/Clear Active Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE703 ,Set/Clear Active Bit 703" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE702 ,Set/Clear Active Bit 702" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE701 ,Set/Clear Active Bit 701" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE700 ,Set/Clear Active Bit 700" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE699 ,Set/Clear Active Bit 699" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE698 ,Set/Clear Active Bit 698" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE697 ,Set/Clear Active Bit 697" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE696 ,Set/Clear Active Bit 696" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE695 ,Set/Clear Active Bit 695" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE694 ,Set/Clear Active Bit 694" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE693 ,Set/Clear Active Bit 693" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE692 ,Set/Clear Active Bit 692" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE691 ,Set/Clear Active Bit 691" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE690 ,Set/Clear Active Bit 690" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE689 ,Set/Clear Active Bit 689" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE688 ,Set/Clear Active Bit 688" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE687 ,Set/Clear Active Bit 687" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE686 ,Set/Clear Active Bit 686" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE685 ,Set/Clear Active Bit 685" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE684 ,Set/Clear Active Bit 684" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE683 ,Set/Clear Active Bit 683" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE682 ,Set/Clear Active Bit 682" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE681 ,Set/Clear Active Bit 681" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE680 ,Set/Clear Active Bit 680" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE679 ,Set/Clear Active Bit 679" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE678 ,Set/Clear Active Bit 678" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE677 ,Set/Clear Active Bit 677" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE676 ,Set/Clear Active Bit 676" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE675 ,Set/Clear Active Bit 675" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE674 ,Set/Clear Active Bit 674" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE673 ,Set/Clear Active Bit 673" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE672 ,Set/Clear Active Bit 672" "Not active,Active" else hgroup.long 0x0354++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER21,Interrupt Set/Clear Active Register 21" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) group.long 0x0358++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER22,Interrupt Set/Clear Active Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE735 ,Set/Clear Active Bit 735" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE734 ,Set/Clear Active Bit 734" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE733 ,Set/Clear Active Bit 733" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE732 ,Set/Clear Active Bit 732" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE731 ,Set/Clear Active Bit 731" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE730 ,Set/Clear Active Bit 730" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE729 ,Set/Clear Active Bit 729" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE728 ,Set/Clear Active Bit 728" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE727 ,Set/Clear Active Bit 727" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE726 ,Set/Clear Active Bit 726" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE725 ,Set/Clear Active Bit 725" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE724 ,Set/Clear Active Bit 724" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE723 ,Set/Clear Active Bit 723" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE722 ,Set/Clear Active Bit 722" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE721 ,Set/Clear Active Bit 721" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE720 ,Set/Clear Active Bit 720" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE719 ,Set/Clear Active Bit 719" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE718 ,Set/Clear Active Bit 718" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE717 ,Set/Clear Active Bit 717" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE716 ,Set/Clear Active Bit 716" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE715 ,Set/Clear Active Bit 715" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE714 ,Set/Clear Active Bit 714" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE713 ,Set/Clear Active Bit 713" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE712 ,Set/Clear Active Bit 712" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE711 ,Set/Clear Active Bit 711" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE710 ,Set/Clear Active Bit 710" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE709 ,Set/Clear Active Bit 709" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE708 ,Set/Clear Active Bit 708" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE707 ,Set/Clear Active Bit 707" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE706 ,Set/Clear Active Bit 706" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE705 ,Set/Clear Active Bit 705" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE704 ,Set/Clear Active Bit 704" "Not active,Active" else hgroup.long 0x0358++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER22,Interrupt Set/Clear Active Register 22" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) group.long 0x035C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER23,Interrupt Set/Clear Active Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE767 ,Set/Clear Active Bit 767" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE766 ,Set/Clear Active Bit 766" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE765 ,Set/Clear Active Bit 765" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE764 ,Set/Clear Active Bit 764" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE763 ,Set/Clear Active Bit 763" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE762 ,Set/Clear Active Bit 762" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE761 ,Set/Clear Active Bit 761" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE760 ,Set/Clear Active Bit 760" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE759 ,Set/Clear Active Bit 759" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE758 ,Set/Clear Active Bit 758" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE757 ,Set/Clear Active Bit 757" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE756 ,Set/Clear Active Bit 756" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE755 ,Set/Clear Active Bit 755" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE754 ,Set/Clear Active Bit 754" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE753 ,Set/Clear Active Bit 753" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE752 ,Set/Clear Active Bit 752" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE751 ,Set/Clear Active Bit 751" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE750 ,Set/Clear Active Bit 750" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE749 ,Set/Clear Active Bit 749" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE748 ,Set/Clear Active Bit 748" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE747 ,Set/Clear Active Bit 747" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE746 ,Set/Clear Active Bit 746" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE745 ,Set/Clear Active Bit 745" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE744 ,Set/Clear Active Bit 744" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE743 ,Set/Clear Active Bit 743" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE742 ,Set/Clear Active Bit 742" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE741 ,Set/Clear Active Bit 741" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE740 ,Set/Clear Active Bit 740" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE739 ,Set/Clear Active Bit 739" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE738 ,Set/Clear Active Bit 738" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE737 ,Set/Clear Active Bit 737" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE736 ,Set/Clear Active Bit 736" "Not active,Active" else hgroup.long 0x035C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER23,Interrupt Set/Clear Active Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) group.long 0x0360++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER24,Interrupt Set/Clear Active Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE799 ,Set/Clear Active Bit 799" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE798 ,Set/Clear Active Bit 798" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE797 ,Set/Clear Active Bit 797" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE796 ,Set/Clear Active Bit 796" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE795 ,Set/Clear Active Bit 795" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE794 ,Set/Clear Active Bit 794" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE793 ,Set/Clear Active Bit 793" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE792 ,Set/Clear Active Bit 792" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE791 ,Set/Clear Active Bit 791" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE790 ,Set/Clear Active Bit 790" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE789 ,Set/Clear Active Bit 789" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE788 ,Set/Clear Active Bit 788" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE787 ,Set/Clear Active Bit 787" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE786 ,Set/Clear Active Bit 786" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE785 ,Set/Clear Active Bit 785" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE784 ,Set/Clear Active Bit 784" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE783 ,Set/Clear Active Bit 783" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE782 ,Set/Clear Active Bit 782" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE781 ,Set/Clear Active Bit 781" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE780 ,Set/Clear Active Bit 780" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE779 ,Set/Clear Active Bit 779" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE778 ,Set/Clear Active Bit 778" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE777 ,Set/Clear Active Bit 777" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE776 ,Set/Clear Active Bit 776" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE775 ,Set/Clear Active Bit 775" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE774 ,Set/Clear Active Bit 774" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE773 ,Set/Clear Active Bit 773" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE772 ,Set/Clear Active Bit 772" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE771 ,Set/Clear Active Bit 771" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE770 ,Set/Clear Active Bit 770" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE769 ,Set/Clear Active Bit 769" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE768 ,Set/Clear Active Bit 768" "Not active,Active" else hgroup.long 0x0360++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER24,Interrupt Set/Clear Active Register 24" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) group.long 0x0364++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER25,Interrupt Set/Clear Active Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE831 ,Set/Clear Active Bit 831" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE830 ,Set/Clear Active Bit 830" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE829 ,Set/Clear Active Bit 829" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE828 ,Set/Clear Active Bit 828" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE827 ,Set/Clear Active Bit 827" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE826 ,Set/Clear Active Bit 826" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE825 ,Set/Clear Active Bit 825" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE824 ,Set/Clear Active Bit 824" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE823 ,Set/Clear Active Bit 823" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE822 ,Set/Clear Active Bit 822" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE821 ,Set/Clear Active Bit 821" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE820 ,Set/Clear Active Bit 820" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE819 ,Set/Clear Active Bit 819" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE818 ,Set/Clear Active Bit 818" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE817 ,Set/Clear Active Bit 817" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE816 ,Set/Clear Active Bit 816" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE815 ,Set/Clear Active Bit 815" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE814 ,Set/Clear Active Bit 814" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE813 ,Set/Clear Active Bit 813" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE812 ,Set/Clear Active Bit 812" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE811 ,Set/Clear Active Bit 811" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE810 ,Set/Clear Active Bit 810" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE809 ,Set/Clear Active Bit 809" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE808 ,Set/Clear Active Bit 808" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE807 ,Set/Clear Active Bit 807" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE806 ,Set/Clear Active Bit 806" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE805 ,Set/Clear Active Bit 805" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE804 ,Set/Clear Active Bit 804" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE803 ,Set/Clear Active Bit 803" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE802 ,Set/Clear Active Bit 802" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE801 ,Set/Clear Active Bit 801" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE800 ,Set/Clear Active Bit 800" "Not active,Active" else hgroup.long 0x0364++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER25,Interrupt Set/Clear Active Register 25" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) group.long 0x0368++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER26,Interrupt Set/Clear Active Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE863 ,Set/Clear Active Bit 863" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE862 ,Set/Clear Active Bit 862" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE861 ,Set/Clear Active Bit 861" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE860 ,Set/Clear Active Bit 860" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE859 ,Set/Clear Active Bit 859" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE858 ,Set/Clear Active Bit 858" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE857 ,Set/Clear Active Bit 857" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE856 ,Set/Clear Active Bit 856" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE855 ,Set/Clear Active Bit 855" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE854 ,Set/Clear Active Bit 854" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE853 ,Set/Clear Active Bit 853" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE852 ,Set/Clear Active Bit 852" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE851 ,Set/Clear Active Bit 851" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE850 ,Set/Clear Active Bit 850" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE849 ,Set/Clear Active Bit 849" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE848 ,Set/Clear Active Bit 848" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE847 ,Set/Clear Active Bit 847" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE846 ,Set/Clear Active Bit 846" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE845 ,Set/Clear Active Bit 845" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE844 ,Set/Clear Active Bit 844" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE843 ,Set/Clear Active Bit 843" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE842 ,Set/Clear Active Bit 842" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE841 ,Set/Clear Active Bit 841" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE840 ,Set/Clear Active Bit 840" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE839 ,Set/Clear Active Bit 839" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE838 ,Set/Clear Active Bit 838" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE837 ,Set/Clear Active Bit 837" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE836 ,Set/Clear Active Bit 836" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE835 ,Set/Clear Active Bit 835" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE834 ,Set/Clear Active Bit 834" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE833 ,Set/Clear Active Bit 833" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE832 ,Set/Clear Active Bit 832" "Not active,Active" else hgroup.long 0x0368++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER26,Interrupt Set/Clear Active Register 26" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) group.long 0x036C++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER27,Interrupt Set/Clear Active Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE895 ,Set/Clear Active Bit 895" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE894 ,Set/Clear Active Bit 894" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE893 ,Set/Clear Active Bit 893" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE892 ,Set/Clear Active Bit 892" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE891 ,Set/Clear Active Bit 891" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE890 ,Set/Clear Active Bit 890" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE889 ,Set/Clear Active Bit 889" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE888 ,Set/Clear Active Bit 888" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE887 ,Set/Clear Active Bit 887" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE886 ,Set/Clear Active Bit 886" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE885 ,Set/Clear Active Bit 885" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE884 ,Set/Clear Active Bit 884" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE883 ,Set/Clear Active Bit 883" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE882 ,Set/Clear Active Bit 882" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE881 ,Set/Clear Active Bit 881" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE880 ,Set/Clear Active Bit 880" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE879 ,Set/Clear Active Bit 879" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE878 ,Set/Clear Active Bit 878" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE877 ,Set/Clear Active Bit 877" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE876 ,Set/Clear Active Bit 876" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE875 ,Set/Clear Active Bit 875" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE874 ,Set/Clear Active Bit 874" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE873 ,Set/Clear Active Bit 873" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE872 ,Set/Clear Active Bit 872" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE871 ,Set/Clear Active Bit 871" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE870 ,Set/Clear Active Bit 870" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE869 ,Set/Clear Active Bit 869" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE868 ,Set/Clear Active Bit 868" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE867 ,Set/Clear Active Bit 867" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE866 ,Set/Clear Active Bit 866" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE865 ,Set/Clear Active Bit 865" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE864 ,Set/Clear Active Bit 864" "Not active,Active" else hgroup.long 0x036C++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER27,Interrupt Set/Clear Active Register 27" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) group.long 0x0370++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER28,Interrupt Set/Clear Active Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE927 ,Set/Clear Active Bit 927" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE926 ,Set/Clear Active Bit 926" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE925 ,Set/Clear Active Bit 925" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE924 ,Set/Clear Active Bit 924" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE923 ,Set/Clear Active Bit 923" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE922 ,Set/Clear Active Bit 922" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE921 ,Set/Clear Active Bit 921" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE920 ,Set/Clear Active Bit 920" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE919 ,Set/Clear Active Bit 919" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE918 ,Set/Clear Active Bit 918" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE917 ,Set/Clear Active Bit 917" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE916 ,Set/Clear Active Bit 916" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE915 ,Set/Clear Active Bit 915" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE914 ,Set/Clear Active Bit 914" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE913 ,Set/Clear Active Bit 913" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE912 ,Set/Clear Active Bit 912" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE911 ,Set/Clear Active Bit 911" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE910 ,Set/Clear Active Bit 910" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE909 ,Set/Clear Active Bit 909" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE908 ,Set/Clear Active Bit 908" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE907 ,Set/Clear Active Bit 907" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE906 ,Set/Clear Active Bit 906" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE905 ,Set/Clear Active Bit 905" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE904 ,Set/Clear Active Bit 904" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE903 ,Set/Clear Active Bit 903" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE902 ,Set/Clear Active Bit 902" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE901 ,Set/Clear Active Bit 901" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE900 ,Set/Clear Active Bit 900" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE899 ,Set/Clear Active Bit 899" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE898 ,Set/Clear Active Bit 898" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE897 ,Set/Clear Active Bit 897" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE896 ,Set/Clear Active Bit 896" "Not active,Active" else hgroup.long 0x0370++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER28,Interrupt Set/Clear Active Register 28" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) group.long 0x0374++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER29,Interrupt Set/Clear Active Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE959 ,Set/Clear Active Bit 959" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE958 ,Set/Clear Active Bit 958" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE957 ,Set/Clear Active Bit 957" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE956 ,Set/Clear Active Bit 956" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE955 ,Set/Clear Active Bit 955" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE954 ,Set/Clear Active Bit 954" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE953 ,Set/Clear Active Bit 953" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE952 ,Set/Clear Active Bit 952" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE951 ,Set/Clear Active Bit 951" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE950 ,Set/Clear Active Bit 950" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE949 ,Set/Clear Active Bit 949" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE948 ,Set/Clear Active Bit 948" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE947 ,Set/Clear Active Bit 947" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE946 ,Set/Clear Active Bit 946" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE945 ,Set/Clear Active Bit 945" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE944 ,Set/Clear Active Bit 944" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE943 ,Set/Clear Active Bit 943" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE942 ,Set/Clear Active Bit 942" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE941 ,Set/Clear Active Bit 941" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE940 ,Set/Clear Active Bit 940" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE939 ,Set/Clear Active Bit 939" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE938 ,Set/Clear Active Bit 938" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE937 ,Set/Clear Active Bit 937" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE936 ,Set/Clear Active Bit 936" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE935 ,Set/Clear Active Bit 935" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE934 ,Set/Clear Active Bit 934" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE933 ,Set/Clear Active Bit 933" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE932 ,Set/Clear Active Bit 932" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE931 ,Set/Clear Active Bit 931" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE930 ,Set/Clear Active Bit 930" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE929 ,Set/Clear Active Bit 929" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE928 ,Set/Clear Active Bit 928" "Not active,Active" else hgroup.long 0x0374++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER29,Interrupt Set/Clear Active Register 29" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) group.long 0x0378++0x03 line.long 0x0 "GICD_SET/CLR_ACTIVER30,Interrupt Set/Clear Active Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE991 ,Set/Clear Active Bit 991" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE990 ,Set/Clear Active Bit 990" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE989 ,Set/Clear Active Bit 989" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE988 ,Set/Clear Active Bit 988" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE987 ,Set/Clear Active Bit 987" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE986 ,Set/Clear Active Bit 986" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE985 ,Set/Clear Active Bit 985" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE984 ,Set/Clear Active Bit 984" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE983 ,Set/Clear Active Bit 983" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE982 ,Set/Clear Active Bit 982" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE981 ,Set/Clear Active Bit 981" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE980 ,Set/Clear Active Bit 980" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE979 ,Set/Clear Active Bit 979" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE978 ,Set/Clear Active Bit 978" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE977 ,Set/Clear Active Bit 977" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE976 ,Set/Clear Active Bit 976" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE975 ,Set/Clear Active Bit 975" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE974 ,Set/Clear Active Bit 974" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE973 ,Set/Clear Active Bit 973" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE972 ,Set/Clear Active Bit 972" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE971 ,Set/Clear Active Bit 971" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE970 ,Set/Clear Active Bit 970" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE969 ,Set/Clear Active Bit 969" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE968 ,Set/Clear Active Bit 968" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE967 ,Set/Clear Active Bit 967" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE966 ,Set/Clear Active Bit 966" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE965 ,Set/Clear Active Bit 965" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE964 ,Set/Clear Active Bit 964" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE963 ,Set/Clear Active Bit 963" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE962 ,Set/Clear Active Bit 962" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE961 ,Set/Clear Active Bit 961" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE960 ,Set/Clear Active Bit 960" "Not active,Active" else hgroup.long 0x0378++0x03 hide.long 0x0 "GICD_SET/CLR_ACTIVER30,Interrupt Set/Clear Active Register 30" endif tree.end width 20. tree "Priority Registers" if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10) hgroup.long 0x400++0x03 hide.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0" hgroup.long 0x404++0x03 hide.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1" hgroup.long 0x408++0x03 hide.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2" hgroup.long 0x40C++0x03 hide.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3" hgroup.long 0x410++0x03 hide.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4" hgroup.long 0x414++0x03 hide.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5" hgroup.long 0x418++0x03 hide.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6" hgroup.long 0x41C++0x03 hide.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7" else group.long 0x400++0x03 line.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0" hexmask.long.byte 0x00 24.--31. 1. " INTID3 ,Interrupt ID3 Priority/Priority Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " INTID2 ,Interrupt ID2 Priority/Priority Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " INTID1 ,Interrupt ID1 Priority/Priority Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " INTID0 ,Interrupt ID0 Priority/Priority Byte Offset 0 " group.long 0x404++0x03 line.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1" hexmask.long.byte 0x00 24.--31. 1. " INTID7 ,Interrupt ID7 Priority/Priority Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " INTID6 ,Interrupt ID6 Priority/Priority Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " INTID5 ,Interrupt ID5 Priority/Priority Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " INTID4 ,Interrupt ID4 Priority/Priority Byte Offset 4 " group.long 0x408++0x03 line.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2" hexmask.long.byte 0x00 24.--31. 1. " INTID11 ,Interrupt ID11 Priority/Priority Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " INTID10 ,Interrupt ID10 Priority/Priority Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " INTID9 ,Interrupt ID9 Priority/Priority Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " INTID8 ,Interrupt ID8 Priority/Priority Byte Offset 8 " group.long 0x40C++0x03 line.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3" hexmask.long.byte 0x00 24.--31. 1. " INTID15 ,Interrupt ID15 Priority/Priority Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " INTID14 ,Interrupt ID14 Priority/Priority Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " INTID13 ,Interrupt ID13 Priority/Priority Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " INTID12 ,Interrupt ID12 Priority/Priority Byte Offset 12 " group.long 0x410++0x03 line.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4" hexmask.long.byte 0x00 24.--31. 1. " INTID19 ,Interrupt ID19 Priority/Priority Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " INTID18 ,Interrupt ID18 Priority/Priority Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " INTID17 ,Interrupt ID17 Priority/Priority Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " INTID16 ,Interrupt ID16 Priority/Priority Byte Offset 16 " group.long 0x414++0x03 line.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5" hexmask.long.byte 0x00 24.--31. 1. " INTID23 ,Interrupt ID23 Priority/Priority Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " INTID22 ,Interrupt ID22 Priority/Priority Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " INTID21 ,Interrupt ID21 Priority/Priority Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " INTID20 ,Interrupt ID20 Priority/Priority Byte Offset 20 " group.long 0x418++0x03 line.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6" hexmask.long.byte 0x00 24.--31. 1. " INTID27 ,Interrupt ID27 Priority/Priority Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " INTID26 ,Interrupt ID26 Priority/Priority Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " INTID25 ,Interrupt ID25 Priority/Priority Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " INTID24 ,Interrupt ID24 Priority/Priority Byte Offset 24 " group.long 0x41C++0x03 line.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7" hexmask.long.byte 0x00 24.--31. 1. " INTID31 ,Interrupt ID31 Priority/Priority Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " INTID30 ,Interrupt ID30 Priority/Priority Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " INTID29 ,Interrupt ID29 Priority/Priority Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " INTID28 ,Interrupt ID28 Priority/Priority Byte Offset 28 " endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01) group.long 0x420++0x03 line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hexmask.long.byte 0x00 24.--31. 1. " INTID35 ,Interrupt ID35 Priority/Priority Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " INTID34 ,Interrupt ID34 Priority/Priority Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " INTID33 ,Interrupt ID33 Priority/Priority Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " INTID32 ,Interrupt ID32 Priority/Priority Byte Offset 32 " group.long 0x424++0x03 line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hexmask.long.byte 0x00 24.--31. 1. " INTID39 ,Interrupt ID39 Priority/Priority Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " INTID38 ,Interrupt ID38 Priority/Priority Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " INTID37 ,Interrupt ID37 Priority/Priority Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " INTID36 ,Interrupt ID36 Priority/Priority Byte Offset 36 " group.long 0x428++0x03 line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hexmask.long.byte 0x00 24.--31. 1. " INTID43 ,Interrupt ID43 Priority/Priority Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " INTID42 ,Interrupt ID42 Priority/Priority Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " INTID41 ,Interrupt ID41 Priority/Priority Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " INTID40 ,Interrupt ID40 Priority/Priority Byte Offset 40 " group.long 0x42C++0x03 line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hexmask.long.byte 0x00 24.--31. 1. " INTID47 ,Interrupt ID47 Priority/Priority Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " INTID46 ,Interrupt ID46 Priority/Priority Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " INTID45 ,Interrupt ID45 Priority/Priority Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " INTID44 ,Interrupt ID44 Priority/Priority Byte Offset 44 " group.long 0x430++0x03 line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hexmask.long.byte 0x00 24.--31. 1. " INTID51 ,Interrupt ID51 Priority/Priority Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " INTID50 ,Interrupt ID50 Priority/Priority Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " INTID49 ,Interrupt ID49 Priority/Priority Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " INTID48 ,Interrupt ID48 Priority/Priority Byte Offset 48 " group.long 0x434++0x03 line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hexmask.long.byte 0x00 24.--31. 1. " INTID55 ,Interrupt ID55 Priority/Priority Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " INTID54 ,Interrupt ID54 Priority/Priority Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " INTID53 ,Interrupt ID53 Priority/Priority Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " INTID52 ,Interrupt ID52 Priority/Priority Byte Offset 52 " group.long 0x438++0x03 line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hexmask.long.byte 0x00 24.--31. 1. " INTID59 ,Interrupt ID59 Priority/Priority Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " INTID58 ,Interrupt ID58 Priority/Priority Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " INTID57 ,Interrupt ID57 Priority/Priority Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " INTID56 ,Interrupt ID56 Priority/Priority Byte Offset 56 " group.long 0x43C++0x03 line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" hexmask.long.byte 0x00 24.--31. 1. " INTID63 ,Interrupt ID63 Priority/Priority Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " INTID62 ,Interrupt ID62 Priority/Priority Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " INTID61 ,Interrupt ID61 Priority/Priority Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " INTID60 ,Interrupt ID60 Priority/Priority Byte Offset 60 " else hgroup.long 0x420++0x03 hide.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hgroup.long 0x424++0x03 hide.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hgroup.long 0x428++0x03 hide.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hgroup.long 0x42C++0x03 hide.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hgroup.long 0x430++0x03 hide.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hgroup.long 0x434++0x03 hide.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hgroup.long 0x438++0x03 hide.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hgroup.long 0x43C++0x03 hide.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02) group.long 0x440++0x03 line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hexmask.long.byte 0x00 24.--31. 1. " INTID67 ,Interrupt ID67 Priority/Priority Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " INTID66 ,Interrupt ID66 Priority/Priority Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " INTID65 ,Interrupt ID65 Priority/Priority Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " INTID64 ,Interrupt ID64 Priority/Priority Byte Offset 64 " group.long 0x444++0x03 line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hexmask.long.byte 0x00 24.--31. 1. " INTID71 ,Interrupt ID71 Priority/Priority Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " INTID70 ,Interrupt ID70 Priority/Priority Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " INTID69 ,Interrupt ID69 Priority/Priority Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " INTID68 ,Interrupt ID68 Priority/Priority Byte Offset 68 " group.long 0x448++0x03 line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hexmask.long.byte 0x00 24.--31. 1. " INTID75 ,Interrupt ID75 Priority/Priority Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " INTID74 ,Interrupt ID74 Priority/Priority Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " INTID73 ,Interrupt ID73 Priority/Priority Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " INTID72 ,Interrupt ID72 Priority/Priority Byte Offset 72 " group.long 0x44C++0x03 line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hexmask.long.byte 0x00 24.--31. 1. " INTID79 ,Interrupt ID79 Priority/Priority Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " INTID78 ,Interrupt ID78 Priority/Priority Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " INTID77 ,Interrupt ID77 Priority/Priority Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " INTID76 ,Interrupt ID76 Priority/Priority Byte Offset 76 " group.long 0x450++0x03 line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hexmask.long.byte 0x00 24.--31. 1. " INTID83 ,Interrupt ID83 Priority/Priority Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " INTID82 ,Interrupt ID82 Priority/Priority Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " INTID81 ,Interrupt ID81 Priority/Priority Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " INTID80 ,Interrupt ID80 Priority/Priority Byte Offset 80 " group.long 0x454++0x03 line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hexmask.long.byte 0x00 24.--31. 1. " INTID87 ,Interrupt ID87 Priority/Priority Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " INTID86 ,Interrupt ID86 Priority/Priority Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " INTID85 ,Interrupt ID85 Priority/Priority Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " INTID84 ,Interrupt ID84 Priority/Priority Byte Offset 84 " group.long 0x458++0x03 line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hexmask.long.byte 0x00 24.--31. 1. " INTID91 ,Interrupt ID91 Priority/Priority Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " INTID90 ,Interrupt ID90 Priority/Priority Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " INTID89 ,Interrupt ID89 Priority/Priority Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " INTID88 ,Interrupt ID88 Priority/Priority Byte Offset 88 " group.long 0x45C++0x03 line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" hexmask.long.byte 0x00 24.--31. 1. " INTID95 ,Interrupt ID95 Priority/Priority Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " INTID94 ,Interrupt ID94 Priority/Priority Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " INTID93 ,Interrupt ID93 Priority/Priority Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " INTID92 ,Interrupt ID92 Priority/Priority Byte Offset 92 " else hgroup.long 0x440++0x03 hide.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hgroup.long 0x444++0x03 hide.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hgroup.long 0x448++0x03 hide.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hgroup.long 0x44C++0x03 hide.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hgroup.long 0x450++0x03 hide.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hgroup.long 0x454++0x03 hide.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hgroup.long 0x458++0x03 hide.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hgroup.long 0x45C++0x03 hide.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03) group.long 0x460++0x03 line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hexmask.long.byte 0x00 24.--31. 1. " INTID99 ,Interrupt ID99 Priority/Priority Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " INTID98 ,Interrupt ID98 Priority/Priority Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " INTID97 ,Interrupt ID97 Priority/Priority Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " INTID96 ,Interrupt ID96 Priority/Priority Byte Offset 96 " group.long 0x464++0x03 line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hexmask.long.byte 0x00 24.--31. 1. " INTID103 ,Interrupt ID103 Priority/Priority Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " INTID102 ,Interrupt ID102 Priority/Priority Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " INTID101 ,Interrupt ID101 Priority/Priority Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " INTID100 ,Interrupt ID100 Priority/Priority Byte Offset 100 " group.long 0x468++0x03 line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hexmask.long.byte 0x00 24.--31. 1. " INTID107 ,Interrupt ID107 Priority/Priority Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " INTID106 ,Interrupt ID106 Priority/Priority Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " INTID105 ,Interrupt ID105 Priority/Priority Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " INTID104 ,Interrupt ID104 Priority/Priority Byte Offset 104 " group.long 0x46C++0x03 line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hexmask.long.byte 0x00 24.--31. 1. " INTID111 ,Interrupt ID111 Priority/Priority Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " INTID110 ,Interrupt ID110 Priority/Priority Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " INTID109 ,Interrupt ID109 Priority/Priority Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " INTID108 ,Interrupt ID108 Priority/Priority Byte Offset 108 " group.long 0x470++0x03 line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hexmask.long.byte 0x00 24.--31. 1. " INTID115 ,Interrupt ID115 Priority/Priority Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " INTID114 ,Interrupt ID114 Priority/Priority Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " INTID113 ,Interrupt ID113 Priority/Priority Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " INTID112 ,Interrupt ID112 Priority/Priority Byte Offset 112 " group.long 0x474++0x03 line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hexmask.long.byte 0x00 24.--31. 1. " INTID119 ,Interrupt ID119 Priority/Priority Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " INTID118 ,Interrupt ID118 Priority/Priority Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " INTID117 ,Interrupt ID117 Priority/Priority Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " INTID116 ,Interrupt ID116 Priority/Priority Byte Offset 116 " group.long 0x478++0x03 line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hexmask.long.byte 0x00 24.--31. 1. " INTID123 ,Interrupt ID123 Priority/Priority Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " INTID122 ,Interrupt ID122 Priority/Priority Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " INTID121 ,Interrupt ID121 Priority/Priority Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " INTID120 ,Interrupt ID120 Priority/Priority Byte Offset 120 " group.long 0x47C++0x03 line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" hexmask.long.byte 0x00 24.--31. 1. " INTID127 ,Interrupt ID127 Priority/Priority Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " INTID126 ,Interrupt ID126 Priority/Priority Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " INTID125 ,Interrupt ID125 Priority/Priority Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " INTID124 ,Interrupt ID124 Priority/Priority Byte Offset 124 " else hgroup.long 0x460++0x03 hide.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hgroup.long 0x464++0x03 hide.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hgroup.long 0x468++0x03 hide.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hgroup.long 0x46C++0x03 hide.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hgroup.long 0x470++0x03 hide.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hgroup.long 0x474++0x03 hide.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hgroup.long 0x478++0x03 hide.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hgroup.long 0x47C++0x03 hide.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04) group.long 0x480++0x03 line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hexmask.long.byte 0x00 24.--31. 1. " INTID131 ,Interrupt ID131 Priority/Priority Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " INTID130 ,Interrupt ID130 Priority/Priority Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " INTID129 ,Interrupt ID129 Priority/Priority Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " INTID128 ,Interrupt ID128 Priority/Priority Byte Offset 128 " group.long 0x484++0x03 line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hexmask.long.byte 0x00 24.--31. 1. " INTID135 ,Interrupt ID135 Priority/Priority Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " INTID134 ,Interrupt ID134 Priority/Priority Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " INTID133 ,Interrupt ID133 Priority/Priority Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " INTID132 ,Interrupt ID132 Priority/Priority Byte Offset 132 " group.long 0x488++0x03 line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hexmask.long.byte 0x00 24.--31. 1. " INTID139 ,Interrupt ID139 Priority/Priority Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " INTID138 ,Interrupt ID138 Priority/Priority Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " INTID137 ,Interrupt ID137 Priority/Priority Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " INTID136 ,Interrupt ID136 Priority/Priority Byte Offset 136 " group.long 0x48C++0x03 line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hexmask.long.byte 0x00 24.--31. 1. " INTID143 ,Interrupt ID143 Priority/Priority Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " INTID142 ,Interrupt ID142 Priority/Priority Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " INTID141 ,Interrupt ID141 Priority/Priority Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " INTID140 ,Interrupt ID140 Priority/Priority Byte Offset 140 " group.long 0x490++0x03 line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hexmask.long.byte 0x00 24.--31. 1. " INTID147 ,Interrupt ID147 Priority/Priority Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " INTID146 ,Interrupt ID146 Priority/Priority Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " INTID145 ,Interrupt ID145 Priority/Priority Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " INTID144 ,Interrupt ID144 Priority/Priority Byte Offset 144 " group.long 0x494++0x03 line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hexmask.long.byte 0x00 24.--31. 1. " INTID151 ,Interrupt ID151 Priority/Priority Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " INTID150 ,Interrupt ID150 Priority/Priority Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " INTID149 ,Interrupt ID149 Priority/Priority Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " INTID148 ,Interrupt ID148 Priority/Priority Byte Offset 148 " group.long 0x498++0x03 line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hexmask.long.byte 0x00 24.--31. 1. " INTID155 ,Interrupt ID155 Priority/Priority Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " INTID154 ,Interrupt ID154 Priority/Priority Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " INTID153 ,Interrupt ID153 Priority/Priority Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " INTID152 ,Interrupt ID152 Priority/Priority Byte Offset 152 " group.long 0x49C++0x03 line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" hexmask.long.byte 0x00 24.--31. 1. " INTID159 ,Interrupt ID159 Priority/Priority Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " INTID158 ,Interrupt ID158 Priority/Priority Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " INTID157 ,Interrupt ID157 Priority/Priority Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " INTID156 ,Interrupt ID156 Priority/Priority Byte Offset 156 " else hgroup.long 0x480++0x03 hide.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hgroup.long 0x484++0x03 hide.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hgroup.long 0x488++0x03 hide.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hgroup.long 0x48C++0x03 hide.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hgroup.long 0x490++0x03 hide.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hgroup.long 0x494++0x03 hide.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hgroup.long 0x498++0x03 hide.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hgroup.long 0x49C++0x03 hide.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05) group.long 0x4A0++0x03 line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hexmask.long.byte 0x00 24.--31. 1. " INTID163 ,Interrupt ID163 Priority/Priority Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " INTID162 ,Interrupt ID162 Priority/Priority Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " INTID161 ,Interrupt ID161 Priority/Priority Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " INTID160 ,Interrupt ID160 Priority/Priority Byte Offset 160 " group.long 0x4A4++0x03 line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hexmask.long.byte 0x00 24.--31. 1. " INTID167 ,Interrupt ID167 Priority/Priority Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " INTID166 ,Interrupt ID166 Priority/Priority Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " INTID165 ,Interrupt ID165 Priority/Priority Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " INTID164 ,Interrupt ID164 Priority/Priority Byte Offset 164 " group.long 0x4A8++0x03 line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hexmask.long.byte 0x00 24.--31. 1. " INTID171 ,Interrupt ID171 Priority/Priority Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " INTID170 ,Interrupt ID170 Priority/Priority Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " INTID169 ,Interrupt ID169 Priority/Priority Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " INTID168 ,Interrupt ID168 Priority/Priority Byte Offset 168 " group.long 0x4AC++0x03 line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hexmask.long.byte 0x00 24.--31. 1. " INTID175 ,Interrupt ID175 Priority/Priority Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " INTID174 ,Interrupt ID174 Priority/Priority Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " INTID173 ,Interrupt ID173 Priority/Priority Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " INTID172 ,Interrupt ID172 Priority/Priority Byte Offset 172 " group.long 0x4B0++0x03 line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hexmask.long.byte 0x00 24.--31. 1. " INTID179 ,Interrupt ID179 Priority/Priority Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " INTID178 ,Interrupt ID178 Priority/Priority Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " INTID177 ,Interrupt ID177 Priority/Priority Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " INTID176 ,Interrupt ID176 Priority/Priority Byte Offset 176 " group.long 0x4B4++0x03 line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hexmask.long.byte 0x00 24.--31. 1. " INTID183 ,Interrupt ID183 Priority/Priority Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " INTID182 ,Interrupt ID182 Priority/Priority Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " INTID181 ,Interrupt ID181 Priority/Priority Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " INTID180 ,Interrupt ID180 Priority/Priority Byte Offset 180 " group.long 0x4B8++0x03 line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hexmask.long.byte 0x00 24.--31. 1. " INTID187 ,Interrupt ID187 Priority/Priority Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " INTID186 ,Interrupt ID186 Priority/Priority Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " INTID185 ,Interrupt ID185 Priority/Priority Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " INTID184 ,Interrupt ID184 Priority/Priority Byte Offset 184 " group.long 0x4BC++0x03 line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" hexmask.long.byte 0x00 24.--31. 1. " INTID191 ,Interrupt ID191 Priority/Priority Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " INTID190 ,Interrupt ID190 Priority/Priority Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " INTID189 ,Interrupt ID189 Priority/Priority Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " INTID188 ,Interrupt ID188 Priority/Priority Byte Offset 188 " else hgroup.long 0x4A0++0x03 hide.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hgroup.long 0x4A4++0x03 hide.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hgroup.long 0x4A8++0x03 hide.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hgroup.long 0x4AC++0x03 hide.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hgroup.long 0x4B0++0x03 hide.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hgroup.long 0x4B4++0x03 hide.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hgroup.long 0x4B8++0x03 hide.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hgroup.long 0x4BC++0x03 hide.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06) group.long 0x4C0++0x03 line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hexmask.long.byte 0x00 24.--31. 1. " INTID195 ,Interrupt ID195 Priority/Priority Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " INTID194 ,Interrupt ID194 Priority/Priority Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " INTID193 ,Interrupt ID193 Priority/Priority Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " INTID192 ,Interrupt ID192 Priority/Priority Byte Offset 192 " group.long 0x4C4++0x03 line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hexmask.long.byte 0x00 24.--31. 1. " INTID199 ,Interrupt ID199 Priority/Priority Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " INTID198 ,Interrupt ID198 Priority/Priority Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " INTID197 ,Interrupt ID197 Priority/Priority Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " INTID196 ,Interrupt ID196 Priority/Priority Byte Offset 196 " group.long 0x4C8++0x03 line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hexmask.long.byte 0x00 24.--31. 1. " INTID203 ,Interrupt ID203 Priority/Priority Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " INTID202 ,Interrupt ID202 Priority/Priority Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " INTID201 ,Interrupt ID201 Priority/Priority Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " INTID200 ,Interrupt ID200 Priority/Priority Byte Offset 200 " group.long 0x4CC++0x03 line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hexmask.long.byte 0x00 24.--31. 1. " INTID207 ,Interrupt ID207 Priority/Priority Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " INTID206 ,Interrupt ID206 Priority/Priority Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " INTID205 ,Interrupt ID205 Priority/Priority Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " INTID204 ,Interrupt ID204 Priority/Priority Byte Offset 204 " group.long 0x4D0++0x03 line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hexmask.long.byte 0x00 24.--31. 1. " INTID211 ,Interrupt ID211 Priority/Priority Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " INTID210 ,Interrupt ID210 Priority/Priority Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " INTID209 ,Interrupt ID209 Priority/Priority Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " INTID208 ,Interrupt ID208 Priority/Priority Byte Offset 208 " group.long 0x4D4++0x03 line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hexmask.long.byte 0x00 24.--31. 1. " INTID215 ,Interrupt ID215 Priority/Priority Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " INTID214 ,Interrupt ID214 Priority/Priority Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " INTID213 ,Interrupt ID213 Priority/Priority Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " INTID212 ,Interrupt ID212 Priority/Priority Byte Offset 212 " group.long 0x4D8++0x03 line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hexmask.long.byte 0x00 24.--31. 1. " INTID219 ,Interrupt ID219 Priority/Priority Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " INTID218 ,Interrupt ID218 Priority/Priority Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " INTID217 ,Interrupt ID217 Priority/Priority Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " INTID216 ,Interrupt ID216 Priority/Priority Byte Offset 216 " group.long 0x4DC++0x03 line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" hexmask.long.byte 0x00 24.--31. 1. " INTID223 ,Interrupt ID223 Priority/Priority Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " INTID222 ,Interrupt ID222 Priority/Priority Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " INTID221 ,Interrupt ID221 Priority/Priority Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " INTID220 ,Interrupt ID220 Priority/Priority Byte Offset 220 " else hgroup.long 0x4C0++0x03 hide.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hgroup.long 0x4C4++0x03 hide.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hgroup.long 0x4C8++0x03 hide.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hgroup.long 0x4CC++0x03 hide.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hgroup.long 0x4D0++0x03 hide.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hgroup.long 0x4D4++0x03 hide.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hgroup.long 0x4D8++0x03 hide.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hgroup.long 0x4DC++0x03 hide.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07) group.long 0x4E0++0x03 line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hexmask.long.byte 0x00 24.--31. 1. " INTID227 ,Interrupt ID227 Priority/Priority Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " INTID226 ,Interrupt ID226 Priority/Priority Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " INTID225 ,Interrupt ID225 Priority/Priority Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " INTID224 ,Interrupt ID224 Priority/Priority Byte Offset 224 " group.long 0x4E4++0x03 line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hexmask.long.byte 0x00 24.--31. 1. " INTID231 ,Interrupt ID231 Priority/Priority Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " INTID230 ,Interrupt ID230 Priority/Priority Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " INTID229 ,Interrupt ID229 Priority/Priority Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " INTID228 ,Interrupt ID228 Priority/Priority Byte Offset 228 " group.long 0x4E8++0x03 line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hexmask.long.byte 0x00 24.--31. 1. " INTID235 ,Interrupt ID235 Priority/Priority Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " INTID234 ,Interrupt ID234 Priority/Priority Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " INTID233 ,Interrupt ID233 Priority/Priority Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " INTID232 ,Interrupt ID232 Priority/Priority Byte Offset 232 " group.long 0x4EC++0x03 line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hexmask.long.byte 0x00 24.--31. 1. " INTID239 ,Interrupt ID239 Priority/Priority Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " INTID238 ,Interrupt ID238 Priority/Priority Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " INTID237 ,Interrupt ID237 Priority/Priority Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " INTID236 ,Interrupt ID236 Priority/Priority Byte Offset 236 " group.long 0x4F0++0x03 line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hexmask.long.byte 0x00 24.--31. 1. " INTID243 ,Interrupt ID243 Priority/Priority Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " INTID242 ,Interrupt ID242 Priority/Priority Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " INTID241 ,Interrupt ID241 Priority/Priority Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " INTID240 ,Interrupt ID240 Priority/Priority Byte Offset 240 " group.long 0x4F4++0x03 line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hexmask.long.byte 0x00 24.--31. 1. " INTID247 ,Interrupt ID247 Priority/Priority Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " INTID246 ,Interrupt ID246 Priority/Priority Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " INTID245 ,Interrupt ID245 Priority/Priority Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " INTID244 ,Interrupt ID244 Priority/Priority Byte Offset 244 " group.long 0x4F8++0x03 line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hexmask.long.byte 0x00 24.--31. 1. " INTID251 ,Interrupt ID251 Priority/Priority Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " INTID250 ,Interrupt ID250 Priority/Priority Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " INTID249 ,Interrupt ID249 Priority/Priority Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " INTID248 ,Interrupt ID248 Priority/Priority Byte Offset 248 " group.long 0x4FC++0x03 line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" hexmask.long.byte 0x00 24.--31. 1. " INTID255 ,Interrupt ID255 Priority/Priority Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " INTID254 ,Interrupt ID254 Priority/Priority Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " INTID253 ,Interrupt ID253 Priority/Priority Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " INTID252 ,Interrupt ID252 Priority/Priority Byte Offset 252 " else hgroup.long 0x4E0++0x03 hide.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hgroup.long 0x4E4++0x03 hide.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hgroup.long 0x4E8++0x03 hide.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hgroup.long 0x4EC++0x03 hide.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hgroup.long 0x4F0++0x03 hide.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hgroup.long 0x4F4++0x03 hide.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hgroup.long 0x4F8++0x03 hide.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hgroup.long 0x4FC++0x03 hide.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08) group.long 0x500++0x03 line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hexmask.long.byte 0x00 24.--31. 1. " INTID259 ,Interrupt ID259 Priority/Priority Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " INTID258 ,Interrupt ID258 Priority/Priority Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " INTID257 ,Interrupt ID257 Priority/Priority Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " INTID256 ,Interrupt ID256 Priority/Priority Byte Offset 256 " group.long 0x504++0x03 line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hexmask.long.byte 0x00 24.--31. 1. " INTID263 ,Interrupt ID263 Priority/Priority Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " INTID262 ,Interrupt ID262 Priority/Priority Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " INTID261 ,Interrupt ID261 Priority/Priority Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " INTID260 ,Interrupt ID260 Priority/Priority Byte Offset 260 " group.long 0x508++0x03 line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hexmask.long.byte 0x00 24.--31. 1. " INTID267 ,Interrupt ID267 Priority/Priority Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " INTID266 ,Interrupt ID266 Priority/Priority Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " INTID265 ,Interrupt ID265 Priority/Priority Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " INTID264 ,Interrupt ID264 Priority/Priority Byte Offset 264 " group.long 0x50C++0x03 line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hexmask.long.byte 0x00 24.--31. 1. " INTID271 ,Interrupt ID271 Priority/Priority Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " INTID270 ,Interrupt ID270 Priority/Priority Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " INTID269 ,Interrupt ID269 Priority/Priority Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " INTID268 ,Interrupt ID268 Priority/Priority Byte Offset 268 " group.long 0x510++0x03 line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hexmask.long.byte 0x00 24.--31. 1. " INTID275 ,Interrupt ID275 Priority/Priority Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " INTID274 ,Interrupt ID274 Priority/Priority Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " INTID273 ,Interrupt ID273 Priority/Priority Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " INTID272 ,Interrupt ID272 Priority/Priority Byte Offset 272 " group.long 0x514++0x03 line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hexmask.long.byte 0x00 24.--31. 1. " INTID279 ,Interrupt ID279 Priority/Priority Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " INTID278 ,Interrupt ID278 Priority/Priority Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " INTID277 ,Interrupt ID277 Priority/Priority Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " INTID276 ,Interrupt ID276 Priority/Priority Byte Offset 276 " group.long 0x518++0x03 line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hexmask.long.byte 0x00 24.--31. 1. " INTID283 ,Interrupt ID283 Priority/Priority Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " INTID282 ,Interrupt ID282 Priority/Priority Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " INTID281 ,Interrupt ID281 Priority/Priority Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " INTID280 ,Interrupt ID280 Priority/Priority Byte Offset 280 " group.long 0x51C++0x03 line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" hexmask.long.byte 0x00 24.--31. 1. " INTID287 ,Interrupt ID287 Priority/Priority Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " INTID286 ,Interrupt ID286 Priority/Priority Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " INTID285 ,Interrupt ID285 Priority/Priority Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " INTID284 ,Interrupt ID284 Priority/Priority Byte Offset 284 " else hgroup.long 0x500++0x03 hide.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hgroup.long 0x504++0x03 hide.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hgroup.long 0x508++0x03 hide.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hgroup.long 0x50C++0x03 hide.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hgroup.long 0x510++0x03 hide.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hgroup.long 0x514++0x03 hide.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hgroup.long 0x518++0x03 hide.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hgroup.long 0x51C++0x03 hide.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09) group.long 0x520++0x03 line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hexmask.long.byte 0x00 24.--31. 1. " INTID291 ,Interrupt ID291 Priority/Priority Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " INTID290 ,Interrupt ID290 Priority/Priority Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " INTID289 ,Interrupt ID289 Priority/Priority Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " INTID288 ,Interrupt ID288 Priority/Priority Byte Offset 288 " group.long 0x524++0x03 line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hexmask.long.byte 0x00 24.--31. 1. " INTID295 ,Interrupt ID295 Priority/Priority Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " INTID294 ,Interrupt ID294 Priority/Priority Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " INTID293 ,Interrupt ID293 Priority/Priority Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " INTID292 ,Interrupt ID292 Priority/Priority Byte Offset 292 " group.long 0x528++0x03 line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hexmask.long.byte 0x00 24.--31. 1. " INTID299 ,Interrupt ID299 Priority/Priority Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " INTID298 ,Interrupt ID298 Priority/Priority Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " INTID297 ,Interrupt ID297 Priority/Priority Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " INTID296 ,Interrupt ID296 Priority/Priority Byte Offset 296 " group.long 0x52C++0x03 line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hexmask.long.byte 0x00 24.--31. 1. " INTID303 ,Interrupt ID303 Priority/Priority Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " INTID302 ,Interrupt ID302 Priority/Priority Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " INTID301 ,Interrupt ID301 Priority/Priority Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " INTID300 ,Interrupt ID300 Priority/Priority Byte Offset 300 " group.long 0x530++0x03 line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hexmask.long.byte 0x00 24.--31. 1. " INTID307 ,Interrupt ID307 Priority/Priority Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " INTID306 ,Interrupt ID306 Priority/Priority Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " INTID305 ,Interrupt ID305 Priority/Priority Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " INTID304 ,Interrupt ID304 Priority/Priority Byte Offset 304 " group.long 0x534++0x03 line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hexmask.long.byte 0x00 24.--31. 1. " INTID311 ,Interrupt ID311 Priority/Priority Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " INTID310 ,Interrupt ID310 Priority/Priority Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " INTID309 ,Interrupt ID309 Priority/Priority Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " INTID308 ,Interrupt ID308 Priority/Priority Byte Offset 308 " group.long 0x538++0x03 line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hexmask.long.byte 0x00 24.--31. 1. " INTID315 ,Interrupt ID315 Priority/Priority Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " INTID314 ,Interrupt ID314 Priority/Priority Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " INTID313 ,Interrupt ID313 Priority/Priority Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " INTID312 ,Interrupt ID312 Priority/Priority Byte Offset 312 " group.long 0x53C++0x03 line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" hexmask.long.byte 0x00 24.--31. 1. " INTID319 ,Interrupt ID319 Priority/Priority Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " INTID318 ,Interrupt ID318 Priority/Priority Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " INTID317 ,Interrupt ID317 Priority/Priority Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " INTID316 ,Interrupt ID316 Priority/Priority Byte Offset 316 " else hgroup.long 0x520++0x03 hide.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hgroup.long 0x524++0x03 hide.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hgroup.long 0x528++0x03 hide.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hgroup.long 0x52C++0x03 hide.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hgroup.long 0x530++0x03 hide.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hgroup.long 0x534++0x03 hide.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hgroup.long 0x538++0x03 hide.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hgroup.long 0x53C++0x03 hide.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A) group.long 0x540++0x03 line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hexmask.long.byte 0x00 24.--31. 1. " INTID323 ,Interrupt ID323 Priority/Priority Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " INTID322 ,Interrupt ID322 Priority/Priority Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " INTID321 ,Interrupt ID321 Priority/Priority Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " INTID320 ,Interrupt ID320 Priority/Priority Byte Offset 320 " group.long 0x544++0x03 line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hexmask.long.byte 0x00 24.--31. 1. " INTID327 ,Interrupt ID327 Priority/Priority Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " INTID326 ,Interrupt ID326 Priority/Priority Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " INTID325 ,Interrupt ID325 Priority/Priority Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " INTID324 ,Interrupt ID324 Priority/Priority Byte Offset 324 " group.long 0x548++0x03 line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hexmask.long.byte 0x00 24.--31. 1. " INTID331 ,Interrupt ID331 Priority/Priority Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " INTID330 ,Interrupt ID330 Priority/Priority Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " INTID329 ,Interrupt ID329 Priority/Priority Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " INTID328 ,Interrupt ID328 Priority/Priority Byte Offset 328 " group.long 0x54C++0x03 line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hexmask.long.byte 0x00 24.--31. 1. " INTID335 ,Interrupt ID335 Priority/Priority Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " INTID334 ,Interrupt ID334 Priority/Priority Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " INTID333 ,Interrupt ID333 Priority/Priority Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " INTID332 ,Interrupt ID332 Priority/Priority Byte Offset 332 " group.long 0x550++0x03 line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hexmask.long.byte 0x00 24.--31. 1. " INTID339 ,Interrupt ID339 Priority/Priority Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " INTID338 ,Interrupt ID338 Priority/Priority Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " INTID337 ,Interrupt ID337 Priority/Priority Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " INTID336 ,Interrupt ID336 Priority/Priority Byte Offset 336 " group.long 0x554++0x03 line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hexmask.long.byte 0x00 24.--31. 1. " INTID343 ,Interrupt ID343 Priority/Priority Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " INTID342 ,Interrupt ID342 Priority/Priority Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " INTID341 ,Interrupt ID341 Priority/Priority Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " INTID340 ,Interrupt ID340 Priority/Priority Byte Offset 340 " group.long 0x558++0x03 line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hexmask.long.byte 0x00 24.--31. 1. " INTID347 ,Interrupt ID347 Priority/Priority Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " INTID346 ,Interrupt ID346 Priority/Priority Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " INTID345 ,Interrupt ID345 Priority/Priority Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " INTID344 ,Interrupt ID344 Priority/Priority Byte Offset 344 " group.long 0x55C++0x03 line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" hexmask.long.byte 0x00 24.--31. 1. " INTID351 ,Interrupt ID351 Priority/Priority Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " INTID350 ,Interrupt ID350 Priority/Priority Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " INTID349 ,Interrupt ID349 Priority/Priority Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " INTID348 ,Interrupt ID348 Priority/Priority Byte Offset 348 " else hgroup.long 0x540++0x03 hide.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hgroup.long 0x544++0x03 hide.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hgroup.long 0x548++0x03 hide.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hgroup.long 0x54C++0x03 hide.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hgroup.long 0x550++0x03 hide.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hgroup.long 0x554++0x03 hide.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hgroup.long 0x558++0x03 hide.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hgroup.long 0x55C++0x03 hide.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B) group.long 0x560++0x03 line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hexmask.long.byte 0x00 24.--31. 1. " INTID355 ,Interrupt ID355 Priority/Priority Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " INTID354 ,Interrupt ID354 Priority/Priority Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " INTID353 ,Interrupt ID353 Priority/Priority Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " INTID352 ,Interrupt ID352 Priority/Priority Byte Offset 352 " group.long 0x564++0x03 line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hexmask.long.byte 0x00 24.--31. 1. " INTID359 ,Interrupt ID359 Priority/Priority Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " INTID358 ,Interrupt ID358 Priority/Priority Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " INTID357 ,Interrupt ID357 Priority/Priority Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " INTID356 ,Interrupt ID356 Priority/Priority Byte Offset 356 " group.long 0x568++0x03 line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hexmask.long.byte 0x00 24.--31. 1. " INTID363 ,Interrupt ID363 Priority/Priority Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " INTID362 ,Interrupt ID362 Priority/Priority Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " INTID361 ,Interrupt ID361 Priority/Priority Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " INTID360 ,Interrupt ID360 Priority/Priority Byte Offset 360 " group.long 0x56C++0x03 line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hexmask.long.byte 0x00 24.--31. 1. " INTID367 ,Interrupt ID367 Priority/Priority Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " INTID366 ,Interrupt ID366 Priority/Priority Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " INTID365 ,Interrupt ID365 Priority/Priority Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " INTID364 ,Interrupt ID364 Priority/Priority Byte Offset 364 " group.long 0x570++0x03 line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hexmask.long.byte 0x00 24.--31. 1. " INTID371 ,Interrupt ID371 Priority/Priority Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " INTID370 ,Interrupt ID370 Priority/Priority Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " INTID369 ,Interrupt ID369 Priority/Priority Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " INTID368 ,Interrupt ID368 Priority/Priority Byte Offset 368 " group.long 0x574++0x03 line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hexmask.long.byte 0x00 24.--31. 1. " INTID375 ,Interrupt ID375 Priority/Priority Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " INTID374 ,Interrupt ID374 Priority/Priority Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " INTID373 ,Interrupt ID373 Priority/Priority Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " INTID372 ,Interrupt ID372 Priority/Priority Byte Offset 372 " group.long 0x578++0x03 line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hexmask.long.byte 0x00 24.--31. 1. " INTID379 ,Interrupt ID379 Priority/Priority Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " INTID378 ,Interrupt ID378 Priority/Priority Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " INTID377 ,Interrupt ID377 Priority/Priority Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " INTID376 ,Interrupt ID376 Priority/Priority Byte Offset 376 " group.long 0x57C++0x03 line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" hexmask.long.byte 0x00 24.--31. 1. " INTID383 ,Interrupt ID383 Priority/Priority Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " INTID382 ,Interrupt ID382 Priority/Priority Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " INTID381 ,Interrupt ID381 Priority/Priority Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " INTID380 ,Interrupt ID380 Priority/Priority Byte Offset 380 " else hgroup.long 0x560++0x03 hide.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hgroup.long 0x564++0x03 hide.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hgroup.long 0x568++0x03 hide.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hgroup.long 0x56C++0x03 hide.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hgroup.long 0x570++0x03 hide.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hgroup.long 0x574++0x03 hide.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hgroup.long 0x578++0x03 hide.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hgroup.long 0x57C++0x03 hide.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C) group.long 0x580++0x03 line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hexmask.long.byte 0x00 24.--31. 1. " INTID387 ,Interrupt ID387 Priority/Priority Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " INTID386 ,Interrupt ID386 Priority/Priority Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " INTID385 ,Interrupt ID385 Priority/Priority Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " INTID384 ,Interrupt ID384 Priority/Priority Byte Offset 384 " group.long 0x584++0x03 line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hexmask.long.byte 0x00 24.--31. 1. " INTID391 ,Interrupt ID391 Priority/Priority Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " INTID390 ,Interrupt ID390 Priority/Priority Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " INTID389 ,Interrupt ID389 Priority/Priority Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " INTID388 ,Interrupt ID388 Priority/Priority Byte Offset 388 " group.long 0x588++0x03 line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hexmask.long.byte 0x00 24.--31. 1. " INTID395 ,Interrupt ID395 Priority/Priority Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " INTID394 ,Interrupt ID394 Priority/Priority Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " INTID393 ,Interrupt ID393 Priority/Priority Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " INTID392 ,Interrupt ID392 Priority/Priority Byte Offset 392 " group.long 0x58C++0x03 line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hexmask.long.byte 0x00 24.--31. 1. " INTID399 ,Interrupt ID399 Priority/Priority Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " INTID398 ,Interrupt ID398 Priority/Priority Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " INTID397 ,Interrupt ID397 Priority/Priority Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " INTID396 ,Interrupt ID396 Priority/Priority Byte Offset 396 " group.long 0x590++0x03 line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hexmask.long.byte 0x00 24.--31. 1. " INTID403 ,Interrupt ID403 Priority/Priority Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " INTID402 ,Interrupt ID402 Priority/Priority Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " INTID401 ,Interrupt ID401 Priority/Priority Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " INTID400 ,Interrupt ID400 Priority/Priority Byte Offset 400 " group.long 0x594++0x03 line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hexmask.long.byte 0x00 24.--31. 1. " INTID407 ,Interrupt ID407 Priority/Priority Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " INTID406 ,Interrupt ID406 Priority/Priority Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " INTID405 ,Interrupt ID405 Priority/Priority Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " INTID404 ,Interrupt ID404 Priority/Priority Byte Offset 404 " group.long 0x598++0x03 line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hexmask.long.byte 0x00 24.--31. 1. " INTID411 ,Interrupt ID411 Priority/Priority Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " INTID410 ,Interrupt ID410 Priority/Priority Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " INTID409 ,Interrupt ID409 Priority/Priority Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " INTID408 ,Interrupt ID408 Priority/Priority Byte Offset 408 " group.long 0x59C++0x03 line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" hexmask.long.byte 0x00 24.--31. 1. " INTID415 ,Interrupt ID415 Priority/Priority Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " INTID414 ,Interrupt ID414 Priority/Priority Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " INTID413 ,Interrupt ID413 Priority/Priority Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " INTID412 ,Interrupt ID412 Priority/Priority Byte Offset 412 " else hgroup.long 0x580++0x03 hide.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hgroup.long 0x584++0x03 hide.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hgroup.long 0x588++0x03 hide.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hgroup.long 0x58C++0x03 hide.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hgroup.long 0x590++0x03 hide.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hgroup.long 0x594++0x03 hide.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hgroup.long 0x598++0x03 hide.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hgroup.long 0x59C++0x03 hide.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D) group.long 0x5A0++0x03 line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hexmask.long.byte 0x00 24.--31. 1. " INTID419 ,Interrupt ID419 Priority/Priority Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " INTID418 ,Interrupt ID418 Priority/Priority Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " INTID417 ,Interrupt ID417 Priority/Priority Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " INTID416 ,Interrupt ID416 Priority/Priority Byte Offset 416 " group.long 0x5A4++0x03 line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hexmask.long.byte 0x00 24.--31. 1. " INTID423 ,Interrupt ID423 Priority/Priority Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " INTID422 ,Interrupt ID422 Priority/Priority Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " INTID421 ,Interrupt ID421 Priority/Priority Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " INTID420 ,Interrupt ID420 Priority/Priority Byte Offset 420 " group.long 0x5A8++0x03 line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hexmask.long.byte 0x00 24.--31. 1. " INTID427 ,Interrupt ID427 Priority/Priority Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " INTID426 ,Interrupt ID426 Priority/Priority Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " INTID425 ,Interrupt ID425 Priority/Priority Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " INTID424 ,Interrupt ID424 Priority/Priority Byte Offset 424 " group.long 0x5AC++0x03 line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hexmask.long.byte 0x00 24.--31. 1. " INTID431 ,Interrupt ID431 Priority/Priority Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " INTID430 ,Interrupt ID430 Priority/Priority Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " INTID429 ,Interrupt ID429 Priority/Priority Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " INTID428 ,Interrupt ID428 Priority/Priority Byte Offset 428 " group.long 0x5B0++0x03 line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hexmask.long.byte 0x00 24.--31. 1. " INTID435 ,Interrupt ID435 Priority/Priority Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " INTID434 ,Interrupt ID434 Priority/Priority Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " INTID433 ,Interrupt ID433 Priority/Priority Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " INTID432 ,Interrupt ID432 Priority/Priority Byte Offset 432 " group.long 0x5B4++0x03 line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hexmask.long.byte 0x00 24.--31. 1. " INTID439 ,Interrupt ID439 Priority/Priority Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " INTID438 ,Interrupt ID438 Priority/Priority Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " INTID437 ,Interrupt ID437 Priority/Priority Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " INTID436 ,Interrupt ID436 Priority/Priority Byte Offset 436 " group.long 0x5B8++0x03 line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hexmask.long.byte 0x00 24.--31. 1. " INTID443 ,Interrupt ID443 Priority/Priority Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " INTID442 ,Interrupt ID442 Priority/Priority Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " INTID441 ,Interrupt ID441 Priority/Priority Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " INTID440 ,Interrupt ID440 Priority/Priority Byte Offset 440 " group.long 0x5BC++0x03 line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" hexmask.long.byte 0x00 24.--31. 1. " INTID447 ,Interrupt ID447 Priority/Priority Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " INTID446 ,Interrupt ID446 Priority/Priority Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " INTID445 ,Interrupt ID445 Priority/Priority Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " INTID444 ,Interrupt ID444 Priority/Priority Byte Offset 444 " else hgroup.long 0x5A0++0x03 hide.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hgroup.long 0x5A4++0x03 hide.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hgroup.long 0x5A8++0x03 hide.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hgroup.long 0x5AC++0x03 hide.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hgroup.long 0x5B0++0x03 hide.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hgroup.long 0x5B4++0x03 hide.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hgroup.long 0x5B8++0x03 hide.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hgroup.long 0x5BC++0x03 hide.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E) group.long 0x5C0++0x03 line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hexmask.long.byte 0x00 24.--31. 1. " INTID451 ,Interrupt ID451 Priority/Priority Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " INTID450 ,Interrupt ID450 Priority/Priority Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " INTID449 ,Interrupt ID449 Priority/Priority Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " INTID448 ,Interrupt ID448 Priority/Priority Byte Offset 448 " group.long 0x5C4++0x03 line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hexmask.long.byte 0x00 24.--31. 1. " INTID455 ,Interrupt ID455 Priority/Priority Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " INTID454 ,Interrupt ID454 Priority/Priority Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " INTID453 ,Interrupt ID453 Priority/Priority Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " INTID452 ,Interrupt ID452 Priority/Priority Byte Offset 452 " group.long 0x5C8++0x03 line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hexmask.long.byte 0x00 24.--31. 1. " INTID459 ,Interrupt ID459 Priority/Priority Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " INTID458 ,Interrupt ID458 Priority/Priority Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " INTID457 ,Interrupt ID457 Priority/Priority Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " INTID456 ,Interrupt ID456 Priority/Priority Byte Offset 456 " group.long 0x5CC++0x03 line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hexmask.long.byte 0x00 24.--31. 1. " INTID463 ,Interrupt ID463 Priority/Priority Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " INTID462 ,Interrupt ID462 Priority/Priority Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " INTID461 ,Interrupt ID461 Priority/Priority Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " INTID460 ,Interrupt ID460 Priority/Priority Byte Offset 460 " group.long 0x5D0++0x03 line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hexmask.long.byte 0x00 24.--31. 1. " INTID467 ,Interrupt ID467 Priority/Priority Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " INTID466 ,Interrupt ID466 Priority/Priority Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " INTID465 ,Interrupt ID465 Priority/Priority Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " INTID464 ,Interrupt ID464 Priority/Priority Byte Offset 464 " group.long 0x5D4++0x03 line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hexmask.long.byte 0x00 24.--31. 1. " INTID471 ,Interrupt ID471 Priority/Priority Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " INTID470 ,Interrupt ID470 Priority/Priority Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " INTID469 ,Interrupt ID469 Priority/Priority Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " INTID468 ,Interrupt ID468 Priority/Priority Byte Offset 468 " group.long 0x5D8++0x03 line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hexmask.long.byte 0x00 24.--31. 1. " INTID475 ,Interrupt ID475 Priority/Priority Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " INTID474 ,Interrupt ID474 Priority/Priority Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " INTID473 ,Interrupt ID473 Priority/Priority Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " INTID472 ,Interrupt ID472 Priority/Priority Byte Offset 472 " group.long 0x5DC++0x03 line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" hexmask.long.byte 0x00 24.--31. 1. " INTID479 ,Interrupt ID479 Priority/Priority Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " INTID478 ,Interrupt ID478 Priority/Priority Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " INTID477 ,Interrupt ID477 Priority/Priority Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " INTID476 ,Interrupt ID476 Priority/Priority Byte Offset 476 " else hgroup.long 0x5C0++0x03 hide.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hgroup.long 0x5C4++0x03 hide.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hgroup.long 0x5C8++0x03 hide.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hgroup.long 0x5CC++0x03 hide.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hgroup.long 0x5D0++0x03 hide.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hgroup.long 0x5D4++0x03 hide.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hgroup.long 0x5D8++0x03 hide.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hgroup.long 0x5DC++0x03 hide.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F) group.long 0x5E0++0x03 line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hexmask.long.byte 0x00 24.--31. 1. " INTID483 ,Interrupt ID483 Priority/Priority Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " INTID482 ,Interrupt ID482 Priority/Priority Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " INTID481 ,Interrupt ID481 Priority/Priority Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " INTID480 ,Interrupt ID480 Priority/Priority Byte Offset 480 " group.long 0x5E4++0x03 line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hexmask.long.byte 0x00 24.--31. 1. " INTID487 ,Interrupt ID487 Priority/Priority Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " INTID486 ,Interrupt ID486 Priority/Priority Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " INTID485 ,Interrupt ID485 Priority/Priority Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " INTID484 ,Interrupt ID484 Priority/Priority Byte Offset 484 " group.long 0x5E8++0x03 line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hexmask.long.byte 0x00 24.--31. 1. " INTID491 ,Interrupt ID491 Priority/Priority Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " INTID490 ,Interrupt ID490 Priority/Priority Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " INTID489 ,Interrupt ID489 Priority/Priority Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " INTID488 ,Interrupt ID488 Priority/Priority Byte Offset 488 " group.long 0x5EC++0x03 line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hexmask.long.byte 0x00 24.--31. 1. " INTID495 ,Interrupt ID495 Priority/Priority Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " INTID494 ,Interrupt ID494 Priority/Priority Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " INTID493 ,Interrupt ID493 Priority/Priority Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " INTID492 ,Interrupt ID492 Priority/Priority Byte Offset 492 " group.long 0x5F0++0x03 line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hexmask.long.byte 0x00 24.--31. 1. " INTID499 ,Interrupt ID499 Priority/Priority Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " INTID498 ,Interrupt ID498 Priority/Priority Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " INTID497 ,Interrupt ID497 Priority/Priority Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " INTID496 ,Interrupt ID496 Priority/Priority Byte Offset 496 " group.long 0x5F4++0x03 line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hexmask.long.byte 0x00 24.--31. 1. " INTID503 ,Interrupt ID503 Priority/Priority Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " INTID502 ,Interrupt ID502 Priority/Priority Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " INTID501 ,Interrupt ID501 Priority/Priority Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " INTID500 ,Interrupt ID500 Priority/Priority Byte Offset 500 " group.long 0x5F8++0x03 line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hexmask.long.byte 0x00 24.--31. 1. " INTID507 ,Interrupt ID507 Priority/Priority Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " INTID506 ,Interrupt ID506 Priority/Priority Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " INTID505 ,Interrupt ID505 Priority/Priority Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " INTID504 ,Interrupt ID504 Priority/Priority Byte Offset 504 " group.long 0x5FC++0x03 line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" hexmask.long.byte 0x00 24.--31. 1. " INTID511 ,Interrupt ID511 Priority/Priority Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " INTID510 ,Interrupt ID510 Priority/Priority Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " INTID509 ,Interrupt ID509 Priority/Priority Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " INTID508 ,Interrupt ID508 Priority/Priority Byte Offset 508 " else hgroup.long 0x5E0++0x03 hide.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hgroup.long 0x5E4++0x03 hide.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hgroup.long 0x5E8++0x03 hide.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hgroup.long 0x5EC++0x03 hide.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hgroup.long 0x5F0++0x03 hide.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hgroup.long 0x5F4++0x03 hide.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hgroup.long 0x5F8++0x03 hide.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hgroup.long 0x5FC++0x03 hide.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) group.long 0x600++0x03 line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hexmask.long.byte 0x00 24.--31. 1. " INTID515 ,Interrupt ID515 Priority/Priority Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " INTID514 ,Interrupt ID514 Priority/Priority Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " INTID513 ,Interrupt ID513 Priority/Priority Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " INTID512 ,Interrupt ID512 Priority/Priority Byte Offset 512 " group.long 0x604++0x03 line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hexmask.long.byte 0x00 24.--31. 1. " INTID519 ,Interrupt ID519 Priority/Priority Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " INTID518 ,Interrupt ID518 Priority/Priority Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " INTID517 ,Interrupt ID517 Priority/Priority Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " INTID516 ,Interrupt ID516 Priority/Priority Byte Offset 516 " group.long 0x608++0x03 line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hexmask.long.byte 0x00 24.--31. 1. " INTID523 ,Interrupt ID523 Priority/Priority Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " INTID522 ,Interrupt ID522 Priority/Priority Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " INTID521 ,Interrupt ID521 Priority/Priority Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " INTID520 ,Interrupt ID520 Priority/Priority Byte Offset 520 " group.long 0x60C++0x03 line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hexmask.long.byte 0x00 24.--31. 1. " INTID527 ,Interrupt ID527 Priority/Priority Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " INTID526 ,Interrupt ID526 Priority/Priority Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " INTID525 ,Interrupt ID525 Priority/Priority Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " INTID524 ,Interrupt ID524 Priority/Priority Byte Offset 524 " group.long 0x610++0x03 line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hexmask.long.byte 0x00 24.--31. 1. " INTID531 ,Interrupt ID531 Priority/Priority Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " INTID530 ,Interrupt ID530 Priority/Priority Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " INTID529 ,Interrupt ID529 Priority/Priority Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " INTID528 ,Interrupt ID528 Priority/Priority Byte Offset 528 " group.long 0x614++0x03 line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hexmask.long.byte 0x00 24.--31. 1. " INTID535 ,Interrupt ID535 Priority/Priority Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " INTID534 ,Interrupt ID534 Priority/Priority Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " INTID533 ,Interrupt ID533 Priority/Priority Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " INTID532 ,Interrupt ID532 Priority/Priority Byte Offset 532 " group.long 0x618++0x03 line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hexmask.long.byte 0x00 24.--31. 1. " INTID539 ,Interrupt ID539 Priority/Priority Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " INTID538 ,Interrupt ID538 Priority/Priority Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " INTID537 ,Interrupt ID537 Priority/Priority Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " INTID536 ,Interrupt ID536 Priority/Priority Byte Offset 536 " group.long 0x61C++0x03 line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" hexmask.long.byte 0x00 24.--31. 1. " INTID543 ,Interrupt ID543 Priority/Priority Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " INTID542 ,Interrupt ID542 Priority/Priority Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " INTID541 ,Interrupt ID541 Priority/Priority Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " INTID540 ,Interrupt ID540 Priority/Priority Byte Offset 540 " else hgroup.long 0x600++0x03 hide.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hgroup.long 0x604++0x03 hide.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hgroup.long 0x608++0x03 hide.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hgroup.long 0x60C++0x03 hide.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hgroup.long 0x610++0x03 hide.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hgroup.long 0x614++0x03 hide.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hgroup.long 0x618++0x03 hide.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hgroup.long 0x61C++0x03 hide.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) group.long 0x620++0x03 line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hexmask.long.byte 0x00 24.--31. 1. " INTID547 ,Interrupt ID547 Priority/Priority Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " INTID546 ,Interrupt ID546 Priority/Priority Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " INTID545 ,Interrupt ID545 Priority/Priority Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " INTID544 ,Interrupt ID544 Priority/Priority Byte Offset 544 " group.long 0x624++0x03 line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hexmask.long.byte 0x00 24.--31. 1. " INTID551 ,Interrupt ID551 Priority/Priority Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " INTID550 ,Interrupt ID550 Priority/Priority Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " INTID549 ,Interrupt ID549 Priority/Priority Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " INTID548 ,Interrupt ID548 Priority/Priority Byte Offset 548 " group.long 0x628++0x03 line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hexmask.long.byte 0x00 24.--31. 1. " INTID555 ,Interrupt ID555 Priority/Priority Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " INTID554 ,Interrupt ID554 Priority/Priority Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " INTID553 ,Interrupt ID553 Priority/Priority Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " INTID552 ,Interrupt ID552 Priority/Priority Byte Offset 552 " group.long 0x62C++0x03 line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hexmask.long.byte 0x00 24.--31. 1. " INTID559 ,Interrupt ID559 Priority/Priority Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " INTID558 ,Interrupt ID558 Priority/Priority Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " INTID557 ,Interrupt ID557 Priority/Priority Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " INTID556 ,Interrupt ID556 Priority/Priority Byte Offset 556 " group.long 0x630++0x03 line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hexmask.long.byte 0x00 24.--31. 1. " INTID563 ,Interrupt ID563 Priority/Priority Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " INTID562 ,Interrupt ID562 Priority/Priority Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " INTID561 ,Interrupt ID561 Priority/Priority Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " INTID560 ,Interrupt ID560 Priority/Priority Byte Offset 560 " group.long 0x634++0x03 line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hexmask.long.byte 0x00 24.--31. 1. " INTID567 ,Interrupt ID567 Priority/Priority Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " INTID566 ,Interrupt ID566 Priority/Priority Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " INTID565 ,Interrupt ID565 Priority/Priority Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " INTID564 ,Interrupt ID564 Priority/Priority Byte Offset 564 " group.long 0x638++0x03 line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hexmask.long.byte 0x00 24.--31. 1. " INTID571 ,Interrupt ID571 Priority/Priority Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " INTID570 ,Interrupt ID570 Priority/Priority Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " INTID569 ,Interrupt ID569 Priority/Priority Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " INTID568 ,Interrupt ID568 Priority/Priority Byte Offset 568 " group.long 0x63C++0x03 line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" hexmask.long.byte 0x00 24.--31. 1. " INTID575 ,Interrupt ID575 Priority/Priority Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " INTID574 ,Interrupt ID574 Priority/Priority Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " INTID573 ,Interrupt ID573 Priority/Priority Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " INTID572 ,Interrupt ID572 Priority/Priority Byte Offset 572 " else hgroup.long 0x620++0x03 hide.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hgroup.long 0x624++0x03 hide.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hgroup.long 0x628++0x03 hide.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hgroup.long 0x62C++0x03 hide.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hgroup.long 0x630++0x03 hide.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hgroup.long 0x634++0x03 hide.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hgroup.long 0x638++0x03 hide.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hgroup.long 0x63C++0x03 hide.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) group.long 0x640++0x03 line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hexmask.long.byte 0x00 24.--31. 1. " INTID579 ,Interrupt ID579 Priority/Priority Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " INTID578 ,Interrupt ID578 Priority/Priority Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " INTID577 ,Interrupt ID577 Priority/Priority Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " INTID576 ,Interrupt ID576 Priority/Priority Byte Offset 576 " group.long 0x644++0x03 line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hexmask.long.byte 0x00 24.--31. 1. " INTID583 ,Interrupt ID583 Priority/Priority Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " INTID582 ,Interrupt ID582 Priority/Priority Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " INTID581 ,Interrupt ID581 Priority/Priority Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " INTID580 ,Interrupt ID580 Priority/Priority Byte Offset 580 " group.long 0x648++0x03 line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hexmask.long.byte 0x00 24.--31. 1. " INTID587 ,Interrupt ID587 Priority/Priority Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " INTID586 ,Interrupt ID586 Priority/Priority Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " INTID585 ,Interrupt ID585 Priority/Priority Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " INTID584 ,Interrupt ID584 Priority/Priority Byte Offset 584 " group.long 0x64C++0x03 line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hexmask.long.byte 0x00 24.--31. 1. " INTID591 ,Interrupt ID591 Priority/Priority Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " INTID590 ,Interrupt ID590 Priority/Priority Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " INTID589 ,Interrupt ID589 Priority/Priority Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " INTID588 ,Interrupt ID588 Priority/Priority Byte Offset 588 " group.long 0x650++0x03 line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hexmask.long.byte 0x00 24.--31. 1. " INTID595 ,Interrupt ID595 Priority/Priority Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " INTID594 ,Interrupt ID594 Priority/Priority Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " INTID593 ,Interrupt ID593 Priority/Priority Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " INTID592 ,Interrupt ID592 Priority/Priority Byte Offset 592 " group.long 0x654++0x03 line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hexmask.long.byte 0x00 24.--31. 1. " INTID599 ,Interrupt ID599 Priority/Priority Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " INTID598 ,Interrupt ID598 Priority/Priority Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " INTID597 ,Interrupt ID597 Priority/Priority Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " INTID596 ,Interrupt ID596 Priority/Priority Byte Offset 596 " group.long 0x658++0x03 line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hexmask.long.byte 0x00 24.--31. 1. " INTID603 ,Interrupt ID603 Priority/Priority Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " INTID602 ,Interrupt ID602 Priority/Priority Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " INTID601 ,Interrupt ID601 Priority/Priority Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " INTID600 ,Interrupt ID600 Priority/Priority Byte Offset 600 " group.long 0x65C++0x03 line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" hexmask.long.byte 0x00 24.--31. 1. " INTID607 ,Interrupt ID607 Priority/Priority Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " INTID606 ,Interrupt ID606 Priority/Priority Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " INTID605 ,Interrupt ID605 Priority/Priority Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " INTID604 ,Interrupt ID604 Priority/Priority Byte Offset 604 " else hgroup.long 0x640++0x03 hide.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hgroup.long 0x644++0x03 hide.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hgroup.long 0x648++0x03 hide.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hgroup.long 0x64C++0x03 hide.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hgroup.long 0x650++0x03 hide.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hgroup.long 0x654++0x03 hide.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hgroup.long 0x658++0x03 hide.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hgroup.long 0x65C++0x03 hide.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) group.long 0x660++0x03 line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hexmask.long.byte 0x00 24.--31. 1. " INTID611 ,Interrupt ID611 Priority/Priority Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " INTID610 ,Interrupt ID610 Priority/Priority Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " INTID609 ,Interrupt ID609 Priority/Priority Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " INTID608 ,Interrupt ID608 Priority/Priority Byte Offset 608 " group.long 0x664++0x03 line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hexmask.long.byte 0x00 24.--31. 1. " INTID615 ,Interrupt ID615 Priority/Priority Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " INTID614 ,Interrupt ID614 Priority/Priority Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " INTID613 ,Interrupt ID613 Priority/Priority Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " INTID612 ,Interrupt ID612 Priority/Priority Byte Offset 612 " group.long 0x668++0x03 line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hexmask.long.byte 0x00 24.--31. 1. " INTID619 ,Interrupt ID619 Priority/Priority Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " INTID618 ,Interrupt ID618 Priority/Priority Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " INTID617 ,Interrupt ID617 Priority/Priority Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " INTID616 ,Interrupt ID616 Priority/Priority Byte Offset 616 " group.long 0x66C++0x03 line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hexmask.long.byte 0x00 24.--31. 1. " INTID623 ,Interrupt ID623 Priority/Priority Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " INTID622 ,Interrupt ID622 Priority/Priority Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " INTID621 ,Interrupt ID621 Priority/Priority Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " INTID620 ,Interrupt ID620 Priority/Priority Byte Offset 620 " group.long 0x670++0x03 line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hexmask.long.byte 0x00 24.--31. 1. " INTID627 ,Interrupt ID627 Priority/Priority Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " INTID626 ,Interrupt ID626 Priority/Priority Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " INTID625 ,Interrupt ID625 Priority/Priority Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " INTID624 ,Interrupt ID624 Priority/Priority Byte Offset 624 " group.long 0x674++0x03 line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hexmask.long.byte 0x00 24.--31. 1. " INTID631 ,Interrupt ID631 Priority/Priority Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " INTID630 ,Interrupt ID630 Priority/Priority Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " INTID629 ,Interrupt ID629 Priority/Priority Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " INTID628 ,Interrupt ID628 Priority/Priority Byte Offset 628 " group.long 0x678++0x03 line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hexmask.long.byte 0x00 24.--31. 1. " INTID635 ,Interrupt ID635 Priority/Priority Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " INTID634 ,Interrupt ID634 Priority/Priority Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " INTID633 ,Interrupt ID633 Priority/Priority Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " INTID632 ,Interrupt ID632 Priority/Priority Byte Offset 632 " group.long 0x67C++0x03 line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" hexmask.long.byte 0x00 24.--31. 1. " INTID639 ,Interrupt ID639 Priority/Priority Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " INTID638 ,Interrupt ID638 Priority/Priority Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " INTID637 ,Interrupt ID637 Priority/Priority Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " INTID636 ,Interrupt ID636 Priority/Priority Byte Offset 636 " else hgroup.long 0x660++0x03 hide.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hgroup.long 0x664++0x03 hide.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hgroup.long 0x668++0x03 hide.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hgroup.long 0x66C++0x03 hide.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hgroup.long 0x670++0x03 hide.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hgroup.long 0x674++0x03 hide.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hgroup.long 0x678++0x03 hide.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hgroup.long 0x67C++0x03 hide.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) group.long 0x680++0x03 line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hexmask.long.byte 0x00 24.--31. 1. " INTID643 ,Interrupt ID643 Priority/Priority Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " INTID642 ,Interrupt ID642 Priority/Priority Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " INTID641 ,Interrupt ID641 Priority/Priority Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " INTID640 ,Interrupt ID640 Priority/Priority Byte Offset 640 " group.long 0x684++0x03 line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hexmask.long.byte 0x00 24.--31. 1. " INTID647 ,Interrupt ID647 Priority/Priority Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " INTID646 ,Interrupt ID646 Priority/Priority Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " INTID645 ,Interrupt ID645 Priority/Priority Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " INTID644 ,Interrupt ID644 Priority/Priority Byte Offset 644 " group.long 0x688++0x03 line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hexmask.long.byte 0x00 24.--31. 1. " INTID651 ,Interrupt ID651 Priority/Priority Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " INTID650 ,Interrupt ID650 Priority/Priority Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " INTID649 ,Interrupt ID649 Priority/Priority Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " INTID648 ,Interrupt ID648 Priority/Priority Byte Offset 648 " group.long 0x68C++0x03 line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hexmask.long.byte 0x00 24.--31. 1. " INTID655 ,Interrupt ID655 Priority/Priority Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " INTID654 ,Interrupt ID654 Priority/Priority Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " INTID653 ,Interrupt ID653 Priority/Priority Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " INTID652 ,Interrupt ID652 Priority/Priority Byte Offset 652 " group.long 0x690++0x03 line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hexmask.long.byte 0x00 24.--31. 1. " INTID659 ,Interrupt ID659 Priority/Priority Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " INTID658 ,Interrupt ID658 Priority/Priority Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " INTID657 ,Interrupt ID657 Priority/Priority Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " INTID656 ,Interrupt ID656 Priority/Priority Byte Offset 656 " group.long 0x694++0x03 line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hexmask.long.byte 0x00 24.--31. 1. " INTID663 ,Interrupt ID663 Priority/Priority Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " INTID662 ,Interrupt ID662 Priority/Priority Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " INTID661 ,Interrupt ID661 Priority/Priority Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " INTID660 ,Interrupt ID660 Priority/Priority Byte Offset 660 " group.long 0x698++0x03 line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hexmask.long.byte 0x00 24.--31. 1. " INTID667 ,Interrupt ID667 Priority/Priority Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " INTID666 ,Interrupt ID666 Priority/Priority Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " INTID665 ,Interrupt ID665 Priority/Priority Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " INTID664 ,Interrupt ID664 Priority/Priority Byte Offset 664 " group.long 0x69C++0x03 line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" hexmask.long.byte 0x00 24.--31. 1. " INTID671 ,Interrupt ID671 Priority/Priority Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " INTID670 ,Interrupt ID670 Priority/Priority Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " INTID669 ,Interrupt ID669 Priority/Priority Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " INTID668 ,Interrupt ID668 Priority/Priority Byte Offset 668 " else hgroup.long 0x680++0x03 hide.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hgroup.long 0x684++0x03 hide.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hgroup.long 0x688++0x03 hide.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hgroup.long 0x68C++0x03 hide.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hgroup.long 0x690++0x03 hide.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hgroup.long 0x694++0x03 hide.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hgroup.long 0x698++0x03 hide.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hgroup.long 0x69C++0x03 hide.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) group.long 0x6A0++0x03 line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hexmask.long.byte 0x00 24.--31. 1. " INTID675 ,Interrupt ID675 Priority/Priority Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " INTID674 ,Interrupt ID674 Priority/Priority Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " INTID673 ,Interrupt ID673 Priority/Priority Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " INTID672 ,Interrupt ID672 Priority/Priority Byte Offset 672 " group.long 0x6A4++0x03 line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hexmask.long.byte 0x00 24.--31. 1. " INTID679 ,Interrupt ID679 Priority/Priority Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " INTID678 ,Interrupt ID678 Priority/Priority Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " INTID677 ,Interrupt ID677 Priority/Priority Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " INTID676 ,Interrupt ID676 Priority/Priority Byte Offset 676 " group.long 0x6A8++0x03 line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hexmask.long.byte 0x00 24.--31. 1. " INTID683 ,Interrupt ID683 Priority/Priority Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " INTID682 ,Interrupt ID682 Priority/Priority Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " INTID681 ,Interrupt ID681 Priority/Priority Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " INTID680 ,Interrupt ID680 Priority/Priority Byte Offset 680 " group.long 0x6AC++0x03 line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hexmask.long.byte 0x00 24.--31. 1. " INTID687 ,Interrupt ID687 Priority/Priority Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " INTID686 ,Interrupt ID686 Priority/Priority Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " INTID685 ,Interrupt ID685 Priority/Priority Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " INTID684 ,Interrupt ID684 Priority/Priority Byte Offset 684 " group.long 0x6B0++0x03 line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hexmask.long.byte 0x00 24.--31. 1. " INTID691 ,Interrupt ID691 Priority/Priority Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " INTID690 ,Interrupt ID690 Priority/Priority Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " INTID689 ,Interrupt ID689 Priority/Priority Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " INTID688 ,Interrupt ID688 Priority/Priority Byte Offset 688 " group.long 0x6B4++0x03 line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hexmask.long.byte 0x00 24.--31. 1. " INTID695 ,Interrupt ID695 Priority/Priority Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " INTID694 ,Interrupt ID694 Priority/Priority Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " INTID693 ,Interrupt ID693 Priority/Priority Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " INTID692 ,Interrupt ID692 Priority/Priority Byte Offset 692 " group.long 0x6B8++0x03 line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hexmask.long.byte 0x00 24.--31. 1. " INTID699 ,Interrupt ID699 Priority/Priority Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " INTID698 ,Interrupt ID698 Priority/Priority Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " INTID697 ,Interrupt ID697 Priority/Priority Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " INTID696 ,Interrupt ID696 Priority/Priority Byte Offset 696 " group.long 0x6BC++0x03 line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" hexmask.long.byte 0x00 24.--31. 1. " INTID703 ,Interrupt ID703 Priority/Priority Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " INTID702 ,Interrupt ID702 Priority/Priority Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " INTID701 ,Interrupt ID701 Priority/Priority Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " INTID700 ,Interrupt ID700 Priority/Priority Byte Offset 700 " else hgroup.long 0x6A0++0x03 hide.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hgroup.long 0x6A4++0x03 hide.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hgroup.long 0x6A8++0x03 hide.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hgroup.long 0x6AC++0x03 hide.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hgroup.long 0x6B0++0x03 hide.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hgroup.long 0x6B4++0x03 hide.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hgroup.long 0x6B8++0x03 hide.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hgroup.long 0x6BC++0x03 hide.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) group.long 0x6C0++0x03 line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hexmask.long.byte 0x00 24.--31. 1. " INTID707 ,Interrupt ID707 Priority/Priority Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " INTID706 ,Interrupt ID706 Priority/Priority Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " INTID705 ,Interrupt ID705 Priority/Priority Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " INTID704 ,Interrupt ID704 Priority/Priority Byte Offset 704 " group.long 0x6C4++0x03 line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hexmask.long.byte 0x00 24.--31. 1. " INTID711 ,Interrupt ID711 Priority/Priority Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " INTID710 ,Interrupt ID710 Priority/Priority Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " INTID709 ,Interrupt ID709 Priority/Priority Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " INTID708 ,Interrupt ID708 Priority/Priority Byte Offset 708 " group.long 0x6C8++0x03 line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hexmask.long.byte 0x00 24.--31. 1. " INTID715 ,Interrupt ID715 Priority/Priority Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " INTID714 ,Interrupt ID714 Priority/Priority Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " INTID713 ,Interrupt ID713 Priority/Priority Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " INTID712 ,Interrupt ID712 Priority/Priority Byte Offset 712 " group.long 0x6CC++0x03 line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hexmask.long.byte 0x00 24.--31. 1. " INTID719 ,Interrupt ID719 Priority/Priority Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " INTID718 ,Interrupt ID718 Priority/Priority Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " INTID717 ,Interrupt ID717 Priority/Priority Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " INTID716 ,Interrupt ID716 Priority/Priority Byte Offset 716 " group.long 0x6D0++0x03 line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hexmask.long.byte 0x00 24.--31. 1. " INTID723 ,Interrupt ID723 Priority/Priority Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " INTID722 ,Interrupt ID722 Priority/Priority Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " INTID721 ,Interrupt ID721 Priority/Priority Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " INTID720 ,Interrupt ID720 Priority/Priority Byte Offset 720 " group.long 0x6D4++0x03 line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hexmask.long.byte 0x00 24.--31. 1. " INTID727 ,Interrupt ID727 Priority/Priority Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " INTID726 ,Interrupt ID726 Priority/Priority Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " INTID725 ,Interrupt ID725 Priority/Priority Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " INTID724 ,Interrupt ID724 Priority/Priority Byte Offset 724 " group.long 0x6D8++0x03 line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hexmask.long.byte 0x00 24.--31. 1. " INTID731 ,Interrupt ID731 Priority/Priority Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " INTID730 ,Interrupt ID730 Priority/Priority Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " INTID729 ,Interrupt ID729 Priority/Priority Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " INTID728 ,Interrupt ID728 Priority/Priority Byte Offset 728 " group.long 0x6DC++0x03 line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" hexmask.long.byte 0x00 24.--31. 1. " INTID735 ,Interrupt ID735 Priority/Priority Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " INTID734 ,Interrupt ID734 Priority/Priority Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " INTID733 ,Interrupt ID733 Priority/Priority Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " INTID732 ,Interrupt ID732 Priority/Priority Byte Offset 732 " else hgroup.long 0x6C0++0x03 hide.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hgroup.long 0x6C4++0x03 hide.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hgroup.long 0x6C8++0x03 hide.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hgroup.long 0x6CC++0x03 hide.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hgroup.long 0x6D0++0x03 hide.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hgroup.long 0x6D4++0x03 hide.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hgroup.long 0x6D8++0x03 hide.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hgroup.long 0x6DC++0x03 hide.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) group.long 0x6E0++0x03 line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hexmask.long.byte 0x00 24.--31. 1. " INTID739 ,Interrupt ID739 Priority/Priority Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " INTID738 ,Interrupt ID738 Priority/Priority Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " INTID737 ,Interrupt ID737 Priority/Priority Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " INTID736 ,Interrupt ID736 Priority/Priority Byte Offset 736 " group.long 0x6E4++0x03 line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hexmask.long.byte 0x00 24.--31. 1. " INTID743 ,Interrupt ID743 Priority/Priority Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " INTID742 ,Interrupt ID742 Priority/Priority Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " INTID741 ,Interrupt ID741 Priority/Priority Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " INTID740 ,Interrupt ID740 Priority/Priority Byte Offset 740 " group.long 0x6E8++0x03 line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hexmask.long.byte 0x00 24.--31. 1. " INTID747 ,Interrupt ID747 Priority/Priority Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " INTID746 ,Interrupt ID746 Priority/Priority Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " INTID745 ,Interrupt ID745 Priority/Priority Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " INTID744 ,Interrupt ID744 Priority/Priority Byte Offset 744 " group.long 0x6EC++0x03 line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hexmask.long.byte 0x00 24.--31. 1. " INTID751 ,Interrupt ID751 Priority/Priority Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " INTID750 ,Interrupt ID750 Priority/Priority Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " INTID749 ,Interrupt ID749 Priority/Priority Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " INTID748 ,Interrupt ID748 Priority/Priority Byte Offset 748 " group.long 0x6F0++0x03 line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hexmask.long.byte 0x00 24.--31. 1. " INTID755 ,Interrupt ID755 Priority/Priority Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " INTID754 ,Interrupt ID754 Priority/Priority Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " INTID753 ,Interrupt ID753 Priority/Priority Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " INTID752 ,Interrupt ID752 Priority/Priority Byte Offset 752 " group.long 0x6F4++0x03 line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hexmask.long.byte 0x00 24.--31. 1. " INTID759 ,Interrupt ID759 Priority/Priority Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " INTID758 ,Interrupt ID758 Priority/Priority Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " INTID757 ,Interrupt ID757 Priority/Priority Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " INTID756 ,Interrupt ID756 Priority/Priority Byte Offset 756 " group.long 0x6F8++0x03 line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hexmask.long.byte 0x00 24.--31. 1. " INTID763 ,Interrupt ID763 Priority/Priority Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " INTID762 ,Interrupt ID762 Priority/Priority Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " INTID761 ,Interrupt ID761 Priority/Priority Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " INTID760 ,Interrupt ID760 Priority/Priority Byte Offset 760 " group.long 0x6FC++0x03 line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" hexmask.long.byte 0x00 24.--31. 1. " INTID767 ,Interrupt ID767 Priority/Priority Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " INTID766 ,Interrupt ID766 Priority/Priority Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " INTID765 ,Interrupt ID765 Priority/Priority Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " INTID764 ,Interrupt ID764 Priority/Priority Byte Offset 764 " else hgroup.long 0x6E0++0x03 hide.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hgroup.long 0x6E4++0x03 hide.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hgroup.long 0x6E8++0x03 hide.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hgroup.long 0x6EC++0x03 hide.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hgroup.long 0x6F0++0x03 hide.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hgroup.long 0x6F4++0x03 hide.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hgroup.long 0x6F8++0x03 hide.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hgroup.long 0x6FC++0x03 hide.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) group.long 0x700++0x03 line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hexmask.long.byte 0x00 24.--31. 1. " INTID771 ,Interrupt ID771 Priority/Priority Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " INTID770 ,Interrupt ID770 Priority/Priority Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " INTID769 ,Interrupt ID769 Priority/Priority Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " INTID768 ,Interrupt ID768 Priority/Priority Byte Offset 768 " group.long 0x704++0x03 line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hexmask.long.byte 0x00 24.--31. 1. " INTID775 ,Interrupt ID775 Priority/Priority Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " INTID774 ,Interrupt ID774 Priority/Priority Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " INTID773 ,Interrupt ID773 Priority/Priority Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " INTID772 ,Interrupt ID772 Priority/Priority Byte Offset 772 " group.long 0x708++0x03 line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hexmask.long.byte 0x00 24.--31. 1. " INTID779 ,Interrupt ID779 Priority/Priority Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " INTID778 ,Interrupt ID778 Priority/Priority Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " INTID777 ,Interrupt ID777 Priority/Priority Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " INTID776 ,Interrupt ID776 Priority/Priority Byte Offset 776 " group.long 0x70C++0x03 line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hexmask.long.byte 0x00 24.--31. 1. " INTID783 ,Interrupt ID783 Priority/Priority Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " INTID782 ,Interrupt ID782 Priority/Priority Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " INTID781 ,Interrupt ID781 Priority/Priority Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " INTID780 ,Interrupt ID780 Priority/Priority Byte Offset 780 " group.long 0x710++0x03 line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hexmask.long.byte 0x00 24.--31. 1. " INTID787 ,Interrupt ID787 Priority/Priority Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " INTID786 ,Interrupt ID786 Priority/Priority Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " INTID785 ,Interrupt ID785 Priority/Priority Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " INTID784 ,Interrupt ID784 Priority/Priority Byte Offset 784 " group.long 0x714++0x03 line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hexmask.long.byte 0x00 24.--31. 1. " INTID791 ,Interrupt ID791 Priority/Priority Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " INTID790 ,Interrupt ID790 Priority/Priority Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " INTID789 ,Interrupt ID789 Priority/Priority Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " INTID788 ,Interrupt ID788 Priority/Priority Byte Offset 788 " group.long 0x718++0x03 line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hexmask.long.byte 0x00 24.--31. 1. " INTID795 ,Interrupt ID795 Priority/Priority Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " INTID794 ,Interrupt ID794 Priority/Priority Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " INTID793 ,Interrupt ID793 Priority/Priority Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " INTID792 ,Interrupt ID792 Priority/Priority Byte Offset 792 " group.long 0x71C++0x03 line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" hexmask.long.byte 0x00 24.--31. 1. " INTID799 ,Interrupt ID799 Priority/Priority Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " INTID798 ,Interrupt ID798 Priority/Priority Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " INTID797 ,Interrupt ID797 Priority/Priority Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " INTID796 ,Interrupt ID796 Priority/Priority Byte Offset 796 " else hgroup.long 0x700++0x03 hide.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hgroup.long 0x704++0x03 hide.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hgroup.long 0x708++0x03 hide.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hgroup.long 0x70C++0x03 hide.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hgroup.long 0x710++0x03 hide.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hgroup.long 0x714++0x03 hide.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hgroup.long 0x718++0x03 hide.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hgroup.long 0x71C++0x03 hide.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) group.long 0x720++0x03 line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hexmask.long.byte 0x00 24.--31. 1. " INTID803 ,Interrupt ID803 Priority/Priority Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " INTID802 ,Interrupt ID802 Priority/Priority Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " INTID801 ,Interrupt ID801 Priority/Priority Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " INTID800 ,Interrupt ID800 Priority/Priority Byte Offset 800 " group.long 0x724++0x03 line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hexmask.long.byte 0x00 24.--31. 1. " INTID807 ,Interrupt ID807 Priority/Priority Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " INTID806 ,Interrupt ID806 Priority/Priority Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " INTID805 ,Interrupt ID805 Priority/Priority Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " INTID804 ,Interrupt ID804 Priority/Priority Byte Offset 804 " group.long 0x728++0x03 line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hexmask.long.byte 0x00 24.--31. 1. " INTID811 ,Interrupt ID811 Priority/Priority Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " INTID810 ,Interrupt ID810 Priority/Priority Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " INTID809 ,Interrupt ID809 Priority/Priority Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " INTID808 ,Interrupt ID808 Priority/Priority Byte Offset 808 " group.long 0x72C++0x03 line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hexmask.long.byte 0x00 24.--31. 1. " INTID815 ,Interrupt ID815 Priority/Priority Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " INTID814 ,Interrupt ID814 Priority/Priority Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " INTID813 ,Interrupt ID813 Priority/Priority Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " INTID812 ,Interrupt ID812 Priority/Priority Byte Offset 812 " group.long 0x730++0x03 line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hexmask.long.byte 0x00 24.--31. 1. " INTID819 ,Interrupt ID819 Priority/Priority Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " INTID818 ,Interrupt ID818 Priority/Priority Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " INTID817 ,Interrupt ID817 Priority/Priority Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " INTID816 ,Interrupt ID816 Priority/Priority Byte Offset 816 " group.long 0x734++0x03 line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hexmask.long.byte 0x00 24.--31. 1. " INTID823 ,Interrupt ID823 Priority/Priority Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " INTID822 ,Interrupt ID822 Priority/Priority Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " INTID821 ,Interrupt ID821 Priority/Priority Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " INTID820 ,Interrupt ID820 Priority/Priority Byte Offset 820 " group.long 0x738++0x03 line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hexmask.long.byte 0x00 24.--31. 1. " INTID827 ,Interrupt ID827 Priority/Priority Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " INTID826 ,Interrupt ID826 Priority/Priority Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " INTID825 ,Interrupt ID825 Priority/Priority Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " INTID824 ,Interrupt ID824 Priority/Priority Byte Offset 824 " group.long 0x73C++0x03 line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" hexmask.long.byte 0x00 24.--31. 1. " INTID831 ,Interrupt ID831 Priority/Priority Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " INTID830 ,Interrupt ID830 Priority/Priority Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " INTID829 ,Interrupt ID829 Priority/Priority Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " INTID828 ,Interrupt ID828 Priority/Priority Byte Offset 828 " else hgroup.long 0x720++0x03 hide.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hgroup.long 0x724++0x03 hide.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hgroup.long 0x728++0x03 hide.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hgroup.long 0x72C++0x03 hide.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hgroup.long 0x730++0x03 hide.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hgroup.long 0x734++0x03 hide.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hgroup.long 0x738++0x03 hide.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hgroup.long 0x73C++0x03 hide.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) group.long 0x740++0x03 line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hexmask.long.byte 0x00 24.--31. 1. " INTID835 ,Interrupt ID835 Priority/Priority Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " INTID834 ,Interrupt ID834 Priority/Priority Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " INTID833 ,Interrupt ID833 Priority/Priority Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " INTID832 ,Interrupt ID832 Priority/Priority Byte Offset 832 " group.long 0x744++0x03 line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hexmask.long.byte 0x00 24.--31. 1. " INTID839 ,Interrupt ID839 Priority/Priority Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " INTID838 ,Interrupt ID838 Priority/Priority Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " INTID837 ,Interrupt ID837 Priority/Priority Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " INTID836 ,Interrupt ID836 Priority/Priority Byte Offset 836 " group.long 0x748++0x03 line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hexmask.long.byte 0x00 24.--31. 1. " INTID843 ,Interrupt ID843 Priority/Priority Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " INTID842 ,Interrupt ID842 Priority/Priority Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " INTID841 ,Interrupt ID841 Priority/Priority Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " INTID840 ,Interrupt ID840 Priority/Priority Byte Offset 840 " group.long 0x74C++0x03 line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hexmask.long.byte 0x00 24.--31. 1. " INTID847 ,Interrupt ID847 Priority/Priority Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " INTID846 ,Interrupt ID846 Priority/Priority Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " INTID845 ,Interrupt ID845 Priority/Priority Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " INTID844 ,Interrupt ID844 Priority/Priority Byte Offset 844 " group.long 0x750++0x03 line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hexmask.long.byte 0x00 24.--31. 1. " INTID851 ,Interrupt ID851 Priority/Priority Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " INTID850 ,Interrupt ID850 Priority/Priority Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " INTID849 ,Interrupt ID849 Priority/Priority Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " INTID848 ,Interrupt ID848 Priority/Priority Byte Offset 848 " group.long 0x754++0x03 line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hexmask.long.byte 0x00 24.--31. 1. " INTID855 ,Interrupt ID855 Priority/Priority Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " INTID854 ,Interrupt ID854 Priority/Priority Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " INTID853 ,Interrupt ID853 Priority/Priority Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " INTID852 ,Interrupt ID852 Priority/Priority Byte Offset 852 " group.long 0x758++0x03 line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hexmask.long.byte 0x00 24.--31. 1. " INTID859 ,Interrupt ID859 Priority/Priority Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " INTID858 ,Interrupt ID858 Priority/Priority Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " INTID857 ,Interrupt ID857 Priority/Priority Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " INTID856 ,Interrupt ID856 Priority/Priority Byte Offset 856 " group.long 0x75C++0x03 line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" hexmask.long.byte 0x00 24.--31. 1. " INTID863 ,Interrupt ID863 Priority/Priority Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " INTID862 ,Interrupt ID862 Priority/Priority Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " INTID861 ,Interrupt ID861 Priority/Priority Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " INTID860 ,Interrupt ID860 Priority/Priority Byte Offset 860 " else hgroup.long 0x740++0x03 hide.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hgroup.long 0x744++0x03 hide.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hgroup.long 0x748++0x03 hide.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hgroup.long 0x74C++0x03 hide.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hgroup.long 0x750++0x03 hide.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hgroup.long 0x754++0x03 hide.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hgroup.long 0x758++0x03 hide.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hgroup.long 0x75C++0x03 hide.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) group.long 0x760++0x03 line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hexmask.long.byte 0x00 24.--31. 1. " INTID867 ,Interrupt ID867 Priority/Priority Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " INTID866 ,Interrupt ID866 Priority/Priority Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " INTID865 ,Interrupt ID865 Priority/Priority Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " INTID864 ,Interrupt ID864 Priority/Priority Byte Offset 864 " group.long 0x764++0x03 line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hexmask.long.byte 0x00 24.--31. 1. " INTID871 ,Interrupt ID871 Priority/Priority Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " INTID870 ,Interrupt ID870 Priority/Priority Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " INTID869 ,Interrupt ID869 Priority/Priority Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " INTID868 ,Interrupt ID868 Priority/Priority Byte Offset 868 " group.long 0x768++0x03 line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hexmask.long.byte 0x00 24.--31. 1. " INTID875 ,Interrupt ID875 Priority/Priority Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " INTID874 ,Interrupt ID874 Priority/Priority Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " INTID873 ,Interrupt ID873 Priority/Priority Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " INTID872 ,Interrupt ID872 Priority/Priority Byte Offset 872 " group.long 0x76C++0x03 line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hexmask.long.byte 0x00 24.--31. 1. " INTID879 ,Interrupt ID879 Priority/Priority Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " INTID878 ,Interrupt ID878 Priority/Priority Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " INTID877 ,Interrupt ID877 Priority/Priority Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " INTID876 ,Interrupt ID876 Priority/Priority Byte Offset 876 " group.long 0x770++0x03 line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hexmask.long.byte 0x00 24.--31. 1. " INTID883 ,Interrupt ID883 Priority/Priority Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " INTID882 ,Interrupt ID882 Priority/Priority Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " INTID881 ,Interrupt ID881 Priority/Priority Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " INTID880 ,Interrupt ID880 Priority/Priority Byte Offset 880 " group.long 0x774++0x03 line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hexmask.long.byte 0x00 24.--31. 1. " INTID887 ,Interrupt ID887 Priority/Priority Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " INTID886 ,Interrupt ID886 Priority/Priority Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " INTID885 ,Interrupt ID885 Priority/Priority Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " INTID884 ,Interrupt ID884 Priority/Priority Byte Offset 884 " group.long 0x778++0x03 line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hexmask.long.byte 0x00 24.--31. 1. " INTID891 ,Interrupt ID891 Priority/Priority Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " INTID890 ,Interrupt ID890 Priority/Priority Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " INTID889 ,Interrupt ID889 Priority/Priority Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " INTID888 ,Interrupt ID888 Priority/Priority Byte Offset 888 " group.long 0x77C++0x03 line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" hexmask.long.byte 0x00 24.--31. 1. " INTID895 ,Interrupt ID895 Priority/Priority Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " INTID894 ,Interrupt ID894 Priority/Priority Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " INTID893 ,Interrupt ID893 Priority/Priority Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " INTID892 ,Interrupt ID892 Priority/Priority Byte Offset 892 " else hgroup.long 0x760++0x03 hide.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hgroup.long 0x764++0x03 hide.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hgroup.long 0x768++0x03 hide.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hgroup.long 0x76C++0x03 hide.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hgroup.long 0x770++0x03 hide.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hgroup.long 0x774++0x03 hide.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hgroup.long 0x778++0x03 hide.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hgroup.long 0x77C++0x03 hide.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) group.long 0x780++0x03 line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hexmask.long.byte 0x00 24.--31. 1. " INTID899 ,Interrupt ID899 Priority/Priority Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " INTID898 ,Interrupt ID898 Priority/Priority Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " INTID897 ,Interrupt ID897 Priority/Priority Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " INTID896 ,Interrupt ID896 Priority/Priority Byte Offset 896 " group.long 0x784++0x03 line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hexmask.long.byte 0x00 24.--31. 1. " INTID903 ,Interrupt ID903 Priority/Priority Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " INTID902 ,Interrupt ID902 Priority/Priority Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " INTID901 ,Interrupt ID901 Priority/Priority Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " INTID900 ,Interrupt ID900 Priority/Priority Byte Offset 900 " group.long 0x788++0x03 line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hexmask.long.byte 0x00 24.--31. 1. " INTID907 ,Interrupt ID907 Priority/Priority Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " INTID906 ,Interrupt ID906 Priority/Priority Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " INTID905 ,Interrupt ID905 Priority/Priority Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " INTID904 ,Interrupt ID904 Priority/Priority Byte Offset 904 " group.long 0x78C++0x03 line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hexmask.long.byte 0x00 24.--31. 1. " INTID911 ,Interrupt ID911 Priority/Priority Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " INTID910 ,Interrupt ID910 Priority/Priority Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " INTID909 ,Interrupt ID909 Priority/Priority Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " INTID908 ,Interrupt ID908 Priority/Priority Byte Offset 908 " group.long 0x790++0x03 line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hexmask.long.byte 0x00 24.--31. 1. " INTID915 ,Interrupt ID915 Priority/Priority Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " INTID914 ,Interrupt ID914 Priority/Priority Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " INTID913 ,Interrupt ID913 Priority/Priority Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " INTID912 ,Interrupt ID912 Priority/Priority Byte Offset 912 " group.long 0x794++0x03 line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hexmask.long.byte 0x00 24.--31. 1. " INTID919 ,Interrupt ID919 Priority/Priority Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " INTID918 ,Interrupt ID918 Priority/Priority Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " INTID917 ,Interrupt ID917 Priority/Priority Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " INTID916 ,Interrupt ID916 Priority/Priority Byte Offset 916 " group.long 0x798++0x03 line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hexmask.long.byte 0x00 24.--31. 1. " INTID923 ,Interrupt ID923 Priority/Priority Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " INTID922 ,Interrupt ID922 Priority/Priority Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " INTID921 ,Interrupt ID921 Priority/Priority Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " INTID920 ,Interrupt ID920 Priority/Priority Byte Offset 920 " group.long 0x79C++0x03 line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" hexmask.long.byte 0x00 24.--31. 1. " INTID927 ,Interrupt ID927 Priority/Priority Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " INTID926 ,Interrupt ID926 Priority/Priority Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " INTID925 ,Interrupt ID925 Priority/Priority Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " INTID924 ,Interrupt ID924 Priority/Priority Byte Offset 924 " else hgroup.long 0x780++0x03 hide.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hgroup.long 0x784++0x03 hide.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hgroup.long 0x788++0x03 hide.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hgroup.long 0x78C++0x03 hide.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hgroup.long 0x790++0x03 hide.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hgroup.long 0x794++0x03 hide.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hgroup.long 0x798++0x03 hide.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hgroup.long 0x79C++0x03 hide.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) group.long 0x7A0++0x03 line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hexmask.long.byte 0x00 24.--31. 1. " INTID931 ,Interrupt ID931 Priority/Priority Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " INTID930 ,Interrupt ID930 Priority/Priority Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " INTID929 ,Interrupt ID929 Priority/Priority Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " INTID928 ,Interrupt ID928 Priority/Priority Byte Offset 928 " group.long 0x7A4++0x03 line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hexmask.long.byte 0x00 24.--31. 1. " INTID935 ,Interrupt ID935 Priority/Priority Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " INTID934 ,Interrupt ID934 Priority/Priority Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " INTID933 ,Interrupt ID933 Priority/Priority Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " INTID932 ,Interrupt ID932 Priority/Priority Byte Offset 932 " group.long 0x7A8++0x03 line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hexmask.long.byte 0x00 24.--31. 1. " INTID939 ,Interrupt ID939 Priority/Priority Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " INTID938 ,Interrupt ID938 Priority/Priority Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " INTID937 ,Interrupt ID937 Priority/Priority Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " INTID936 ,Interrupt ID936 Priority/Priority Byte Offset 936 " group.long 0x7AC++0x03 line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hexmask.long.byte 0x00 24.--31. 1. " INTID943 ,Interrupt ID943 Priority/Priority Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " INTID942 ,Interrupt ID942 Priority/Priority Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " INTID941 ,Interrupt ID941 Priority/Priority Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " INTID940 ,Interrupt ID940 Priority/Priority Byte Offset 940 " group.long 0x7B0++0x03 line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hexmask.long.byte 0x00 24.--31. 1. " INTID947 ,Interrupt ID947 Priority/Priority Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " INTID946 ,Interrupt ID946 Priority/Priority Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " INTID945 ,Interrupt ID945 Priority/Priority Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " INTID944 ,Interrupt ID944 Priority/Priority Byte Offset 944 " group.long 0x7B4++0x03 line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hexmask.long.byte 0x00 24.--31. 1. " INTID951 ,Interrupt ID951 Priority/Priority Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " INTID950 ,Interrupt ID950 Priority/Priority Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " INTID949 ,Interrupt ID949 Priority/Priority Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " INTID948 ,Interrupt ID948 Priority/Priority Byte Offset 948 " group.long 0x7B8++0x03 line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hexmask.long.byte 0x00 24.--31. 1. " INTID955 ,Interrupt ID955 Priority/Priority Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " INTID954 ,Interrupt ID954 Priority/Priority Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " INTID953 ,Interrupt ID953 Priority/Priority Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " INTID952 ,Interrupt ID952 Priority/Priority Byte Offset 952 " group.long 0x7BC++0x03 line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" hexmask.long.byte 0x00 24.--31. 1. " INTID959 ,Interrupt ID959 Priority/Priority Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " INTID958 ,Interrupt ID958 Priority/Priority Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " INTID957 ,Interrupt ID957 Priority/Priority Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " INTID956 ,Interrupt ID956 Priority/Priority Byte Offset 956 " else hgroup.long 0x7A0++0x03 hide.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hgroup.long 0x7A4++0x03 hide.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hgroup.long 0x7A8++0x03 hide.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hgroup.long 0x7AC++0x03 hide.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hgroup.long 0x7B0++0x03 hide.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hgroup.long 0x7B4++0x03 hide.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hgroup.long 0x7B8++0x03 hide.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hgroup.long 0x7BC++0x03 hide.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) group.long 0x7C0++0x03 line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hexmask.long.byte 0x00 24.--31. 1. " INTID963 ,Interrupt ID963 Priority/Priority Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " INTID962 ,Interrupt ID962 Priority/Priority Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " INTID961 ,Interrupt ID961 Priority/Priority Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " INTID960 ,Interrupt ID960 Priority/Priority Byte Offset 960 " group.long 0x7C4++0x03 line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hexmask.long.byte 0x00 24.--31. 1. " INTID967 ,Interrupt ID967 Priority/Priority Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " INTID966 ,Interrupt ID966 Priority/Priority Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " INTID965 ,Interrupt ID965 Priority/Priority Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " INTID964 ,Interrupt ID964 Priority/Priority Byte Offset 964 " group.long 0x7C8++0x03 line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hexmask.long.byte 0x00 24.--31. 1. " INTID971 ,Interrupt ID971 Priority/Priority Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " INTID970 ,Interrupt ID970 Priority/Priority Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " INTID969 ,Interrupt ID969 Priority/Priority Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " INTID968 ,Interrupt ID968 Priority/Priority Byte Offset 968 " group.long 0x7CC++0x03 line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hexmask.long.byte 0x00 24.--31. 1. " INTID975 ,Interrupt ID975 Priority/Priority Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " INTID974 ,Interrupt ID974 Priority/Priority Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " INTID973 ,Interrupt ID973 Priority/Priority Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " INTID972 ,Interrupt ID972 Priority/Priority Byte Offset 972 " group.long 0x7D0++0x03 line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hexmask.long.byte 0x00 24.--31. 1. " INTID979 ,Interrupt ID979 Priority/Priority Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " INTID978 ,Interrupt ID978 Priority/Priority Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " INTID977 ,Interrupt ID977 Priority/Priority Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " INTID976 ,Interrupt ID976 Priority/Priority Byte Offset 976 " group.long 0x7D4++0x03 line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hexmask.long.byte 0x00 24.--31. 1. " INTID983 ,Interrupt ID983 Priority/Priority Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " INTID982 ,Interrupt ID982 Priority/Priority Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " INTID981 ,Interrupt ID981 Priority/Priority Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " INTID980 ,Interrupt ID980 Priority/Priority Byte Offset 980 " group.long 0x7D8++0x03 line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hexmask.long.byte 0x00 24.--31. 1. " INTID987 ,Interrupt ID987 Priority/Priority Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " INTID986 ,Interrupt ID986 Priority/Priority Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " INTID985 ,Interrupt ID985 Priority/Priority Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " INTID984 ,Interrupt ID984 Priority/Priority Byte Offset 984 " group.long 0x7DC++0x03 line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" hexmask.long.byte 0x00 24.--31. 1. " INTID991 ,Interrupt ID991 Priority/Priority Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " INTID990 ,Interrupt ID990 Priority/Priority Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " INTID989 ,Interrupt ID989 Priority/Priority Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " INTID988 ,Interrupt ID988 Priority/Priority Byte Offset 988 " else hgroup.long 0x7C0++0x03 hide.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hgroup.long 0x7C4++0x03 hide.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hgroup.long 0x7C8++0x03 hide.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hgroup.long 0x7CC++0x03 hide.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hgroup.long 0x7D0++0x03 hide.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hgroup.long 0x7D4++0x03 hide.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hgroup.long 0x7D8++0x03 hide.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hgroup.long 0x7DC++0x03 hide.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" endif tree.end width 19. tree "Interrupt Targets Registers" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x000000E0)>0x1) hgroup.long 0x800++0x03 hide.long 0x00 "GICD_ITARGETSR0,Interrupt Processor Targets Register 0" hgroup.long 0x804++0x03 hide.long 0x00 "GICD_ITARGETSR1,Interrupt Processor Targets Register 1" hgroup.long 0x808++0x03 hide.long 0x00 "GICD_ITARGETSR2,Interrupt Processor Targets Register 2" hgroup.long 0x80C++0x03 hide.long 0x00 "GICD_ITARGETSR3,Interrupt Processor Targets Register 3" hgroup.long 0x810++0x03 hide.long 0x00 "GICD_ITARGETSR4,Interrupt Processor Targets Register 4" hgroup.long 0x814++0x03 hide.long 0x00 "GICD_ITARGETSR5,Interrupt Processor Targets Register 5" hgroup.long 0x818++0x03 hide.long 0x00 "GICD_ITARGETSR6,Interrupt Processor Targets Register 6" hgroup.long 0x81C++0x03 hide.long 0x00 "GICD_ITARGETSR7,Interrupt Processor Targets Register 7" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01) group.long 0x820++0x03 line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO35 ,CPU Targets Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO34 ,CPU Targets Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO33 ,CPU Targets Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO32 ,CPU Targets Byte Offset 32 " group.long 0x824++0x03 line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO39 ,CPU Targets Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO38 ,CPU Targets Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO37 ,CPU Targets Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO36 ,CPU Targets Byte Offset 36 " group.long 0x828++0x03 line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO43 ,CPU Targets Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO42 ,CPU Targets Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO41 ,CPU Targets Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO40 ,CPU Targets Byte Offset 40 " group.long 0x82C++0x03 line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO47 ,CPU Targets Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO46 ,CPU Targets Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO45 ,CPU Targets Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO44 ,CPU Targets Byte Offset 44 " group.long 0x830++0x03 line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO51 ,CPU Targets Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO50 ,CPU Targets Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO49 ,CPU Targets Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO48 ,CPU Targets Byte Offset 48 " group.long 0x834++0x03 line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO55 ,CPU Targets Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO54 ,CPU Targets Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO53 ,CPU Targets Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO52 ,CPU Targets Byte Offset 52 " group.long 0x838++0x03 line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO59 ,CPU Targets Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO58 ,CPU Targets Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO57 ,CPU Targets Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO56 ,CPU Targets Byte Offset 56 " group.long 0x83C++0x03 line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO63 ,CPU Targets Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO62 ,CPU Targets Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO61 ,CPU Targets Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO60 ,CPU Targets Byte Offset 60 " else hgroup.long 0x820++0x03 hide.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hgroup.long 0x824++0x03 hide.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hgroup.long 0x828++0x03 hide.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hgroup.long 0x82C++0x03 hide.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hgroup.long 0x830++0x03 hide.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hgroup.long 0x834++0x03 hide.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hgroup.long 0x838++0x03 hide.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hgroup.long 0x83C++0x03 hide.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02) group.long 0x840++0x03 line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO67 ,CPU Targets Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO66 ,CPU Targets Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO65 ,CPU Targets Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO64 ,CPU Targets Byte Offset 64 " group.long 0x844++0x03 line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO71 ,CPU Targets Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO70 ,CPU Targets Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO69 ,CPU Targets Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO68 ,CPU Targets Byte Offset 68 " group.long 0x848++0x03 line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO75 ,CPU Targets Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO74 ,CPU Targets Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO73 ,CPU Targets Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO72 ,CPU Targets Byte Offset 72 " group.long 0x84C++0x03 line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO79 ,CPU Targets Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO78 ,CPU Targets Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO77 ,CPU Targets Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO76 ,CPU Targets Byte Offset 76 " group.long 0x850++0x03 line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO83 ,CPU Targets Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO82 ,CPU Targets Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO81 ,CPU Targets Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO80 ,CPU Targets Byte Offset 80 " group.long 0x854++0x03 line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO87 ,CPU Targets Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO86 ,CPU Targets Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO85 ,CPU Targets Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO84 ,CPU Targets Byte Offset 84 " group.long 0x858++0x03 line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO91 ,CPU Targets Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO90 ,CPU Targets Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO89 ,CPU Targets Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO88 ,CPU Targets Byte Offset 88 " group.long 0x85C++0x03 line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO95 ,CPU Targets Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO94 ,CPU Targets Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO93 ,CPU Targets Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO92 ,CPU Targets Byte Offset 92 " else hgroup.long 0x840++0x03 hide.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hgroup.long 0x844++0x03 hide.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hgroup.long 0x848++0x03 hide.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hgroup.long 0x84C++0x03 hide.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hgroup.long 0x850++0x03 hide.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hgroup.long 0x854++0x03 hide.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hgroup.long 0x858++0x03 hide.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hgroup.long 0x85C++0x03 hide.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03) group.long 0x860++0x03 line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO99 ,CPU Targets Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO98 ,CPU Targets Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO97 ,CPU Targets Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO96 ,CPU Targets Byte Offset 96 " group.long 0x864++0x03 line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO103 ,CPU Targets Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO102 ,CPU Targets Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO101 ,CPU Targets Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO100 ,CPU Targets Byte Offset 100 " group.long 0x868++0x03 line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO107 ,CPU Targets Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO106 ,CPU Targets Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO105 ,CPU Targets Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO104 ,CPU Targets Byte Offset 104 " group.long 0x86C++0x03 line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO111 ,CPU Targets Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO110 ,CPU Targets Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO109 ,CPU Targets Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO108 ,CPU Targets Byte Offset 108 " group.long 0x870++0x03 line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO115 ,CPU Targets Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO114 ,CPU Targets Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO113 ,CPU Targets Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO112 ,CPU Targets Byte Offset 112 " group.long 0x874++0x03 line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO119 ,CPU Targets Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO118 ,CPU Targets Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO117 ,CPU Targets Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO116 ,CPU Targets Byte Offset 116 " group.long 0x878++0x03 line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO123 ,CPU Targets Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO122 ,CPU Targets Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO121 ,CPU Targets Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO120 ,CPU Targets Byte Offset 120 " group.long 0x87C++0x03 line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO127 ,CPU Targets Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO126 ,CPU Targets Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO125 ,CPU Targets Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO124 ,CPU Targets Byte Offset 124 " else hgroup.long 0x860++0x03 hide.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hgroup.long 0x864++0x03 hide.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hgroup.long 0x868++0x03 hide.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hgroup.long 0x86C++0x03 hide.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hgroup.long 0x870++0x03 hide.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hgroup.long 0x874++0x03 hide.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hgroup.long 0x878++0x03 hide.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hgroup.long 0x87C++0x03 hide.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04) group.long 0x880++0x03 line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO131 ,CPU Targets Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO130 ,CPU Targets Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO129 ,CPU Targets Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO128 ,CPU Targets Byte Offset 128 " group.long 0x884++0x03 line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO135 ,CPU Targets Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO134 ,CPU Targets Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO133 ,CPU Targets Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO132 ,CPU Targets Byte Offset 132 " group.long 0x888++0x03 line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO139 ,CPU Targets Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO138 ,CPU Targets Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO137 ,CPU Targets Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO136 ,CPU Targets Byte Offset 136 " group.long 0x88C++0x03 line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO143 ,CPU Targets Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO142 ,CPU Targets Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO141 ,CPU Targets Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO140 ,CPU Targets Byte Offset 140 " group.long 0x890++0x03 line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO147 ,CPU Targets Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO146 ,CPU Targets Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO145 ,CPU Targets Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO144 ,CPU Targets Byte Offset 144 " group.long 0x894++0x03 line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO151 ,CPU Targets Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO150 ,CPU Targets Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO149 ,CPU Targets Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO148 ,CPU Targets Byte Offset 148 " group.long 0x898++0x03 line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO155 ,CPU Targets Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO154 ,CPU Targets Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO153 ,CPU Targets Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO152 ,CPU Targets Byte Offset 152 " group.long 0x89C++0x03 line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO159 ,CPU Targets Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO158 ,CPU Targets Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO157 ,CPU Targets Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO156 ,CPU Targets Byte Offset 156 " else hgroup.long 0x880++0x03 hide.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hgroup.long 0x884++0x03 hide.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hgroup.long 0x888++0x03 hide.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hgroup.long 0x88C++0x03 hide.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hgroup.long 0x890++0x03 hide.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hgroup.long 0x894++0x03 hide.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hgroup.long 0x898++0x03 hide.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hgroup.long 0x89C++0x03 hide.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05) group.long 0x8A0++0x03 line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO163 ,CPU Targets Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO162 ,CPU Targets Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO161 ,CPU Targets Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO160 ,CPU Targets Byte Offset 160 " group.long 0x8A4++0x03 line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO167 ,CPU Targets Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO166 ,CPU Targets Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO165 ,CPU Targets Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO164 ,CPU Targets Byte Offset 164 " group.long 0x8A8++0x03 line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO171 ,CPU Targets Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO170 ,CPU Targets Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO169 ,CPU Targets Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO168 ,CPU Targets Byte Offset 168 " group.long 0x8AC++0x03 line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO175 ,CPU Targets Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO174 ,CPU Targets Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO173 ,CPU Targets Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO172 ,CPU Targets Byte Offset 172 " group.long 0x8B0++0x03 line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO179 ,CPU Targets Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO178 ,CPU Targets Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO177 ,CPU Targets Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO176 ,CPU Targets Byte Offset 176 " group.long 0x8B4++0x03 line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO183 ,CPU Targets Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO182 ,CPU Targets Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO181 ,CPU Targets Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO180 ,CPU Targets Byte Offset 180 " group.long 0x8B8++0x03 line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO187 ,CPU Targets Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO186 ,CPU Targets Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO185 ,CPU Targets Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO184 ,CPU Targets Byte Offset 184 " group.long 0x8BC++0x03 line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO191 ,CPU Targets Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO190 ,CPU Targets Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO189 ,CPU Targets Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO188 ,CPU Targets Byte Offset 188 " else hgroup.long 0x8A0++0x03 hide.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hgroup.long 0x8A4++0x03 hide.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hgroup.long 0x8A8++0x03 hide.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hgroup.long 0x8AC++0x03 hide.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hgroup.long 0x8B0++0x03 hide.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hgroup.long 0x8B4++0x03 hide.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hgroup.long 0x8B8++0x03 hide.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hgroup.long 0x8BC++0x03 hide.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06) group.long 0x8C0++0x03 line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO195 ,CPU Targets Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO194 ,CPU Targets Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO193 ,CPU Targets Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO192 ,CPU Targets Byte Offset 192 " group.long 0x8C4++0x03 line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO199 ,CPU Targets Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO198 ,CPU Targets Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO197 ,CPU Targets Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO196 ,CPU Targets Byte Offset 196 " group.long 0x8C8++0x03 line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO203 ,CPU Targets Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO202 ,CPU Targets Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO201 ,CPU Targets Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO200 ,CPU Targets Byte Offset 200 " group.long 0x8CC++0x03 line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO207 ,CPU Targets Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO206 ,CPU Targets Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO205 ,CPU Targets Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO204 ,CPU Targets Byte Offset 204 " group.long 0x8D0++0x03 line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO211 ,CPU Targets Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO210 ,CPU Targets Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO209 ,CPU Targets Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO208 ,CPU Targets Byte Offset 208 " group.long 0x8D4++0x03 line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO215 ,CPU Targets Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO214 ,CPU Targets Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO213 ,CPU Targets Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO212 ,CPU Targets Byte Offset 212 " group.long 0x8D8++0x03 line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO219 ,CPU Targets Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO218 ,CPU Targets Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO217 ,CPU Targets Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO216 ,CPU Targets Byte Offset 216 " group.long 0x8DC++0x03 line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO223 ,CPU Targets Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO222 ,CPU Targets Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO221 ,CPU Targets Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO220 ,CPU Targets Byte Offset 220 " else hgroup.long 0x8C0++0x03 hide.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hgroup.long 0x8C4++0x03 hide.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hgroup.long 0x8C8++0x03 hide.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hgroup.long 0x8CC++0x03 hide.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hgroup.long 0x8D0++0x03 hide.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hgroup.long 0x8D4++0x03 hide.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hgroup.long 0x8D8++0x03 hide.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hgroup.long 0x8DC++0x03 hide.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07) group.long 0x8E0++0x03 line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO227 ,CPU Targets Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO226 ,CPU Targets Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO225 ,CPU Targets Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO224 ,CPU Targets Byte Offset 224 " group.long 0x8E4++0x03 line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO231 ,CPU Targets Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO230 ,CPU Targets Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO229 ,CPU Targets Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO228 ,CPU Targets Byte Offset 228 " group.long 0x8E8++0x03 line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO235 ,CPU Targets Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO234 ,CPU Targets Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO233 ,CPU Targets Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO232 ,CPU Targets Byte Offset 232 " group.long 0x8EC++0x03 line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO239 ,CPU Targets Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO238 ,CPU Targets Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO237 ,CPU Targets Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO236 ,CPU Targets Byte Offset 236 " group.long 0x8F0++0x03 line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO243 ,CPU Targets Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO242 ,CPU Targets Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO241 ,CPU Targets Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO240 ,CPU Targets Byte Offset 240 " group.long 0x8F4++0x03 line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO247 ,CPU Targets Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO246 ,CPU Targets Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO245 ,CPU Targets Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO244 ,CPU Targets Byte Offset 244 " group.long 0x8F8++0x03 line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO251 ,CPU Targets Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO250 ,CPU Targets Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO249 ,CPU Targets Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO248 ,CPU Targets Byte Offset 248 " group.long 0x8FC++0x03 line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO255 ,CPU Targets Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO254 ,CPU Targets Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO253 ,CPU Targets Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO252 ,CPU Targets Byte Offset 252 " else hgroup.long 0x8E0++0x03 hide.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hgroup.long 0x8E4++0x03 hide.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hgroup.long 0x8E8++0x03 hide.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hgroup.long 0x8EC++0x03 hide.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hgroup.long 0x8F0++0x03 hide.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hgroup.long 0x8F4++0x03 hide.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hgroup.long 0x8F8++0x03 hide.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hgroup.long 0x8FC++0x03 hide.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08) group.long 0x900++0x03 line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO259 ,CPU Targets Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO258 ,CPU Targets Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO257 ,CPU Targets Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO256 ,CPU Targets Byte Offset 256 " group.long 0x904++0x03 line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO263 ,CPU Targets Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO262 ,CPU Targets Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO261 ,CPU Targets Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO260 ,CPU Targets Byte Offset 260 " group.long 0x908++0x03 line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO267 ,CPU Targets Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO266 ,CPU Targets Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO265 ,CPU Targets Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO264 ,CPU Targets Byte Offset 264 " group.long 0x90C++0x03 line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO271 ,CPU Targets Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO270 ,CPU Targets Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO269 ,CPU Targets Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO268 ,CPU Targets Byte Offset 268 " group.long 0x910++0x03 line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO275 ,CPU Targets Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO274 ,CPU Targets Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO273 ,CPU Targets Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO272 ,CPU Targets Byte Offset 272 " group.long 0x914++0x03 line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO279 ,CPU Targets Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO278 ,CPU Targets Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO277 ,CPU Targets Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO276 ,CPU Targets Byte Offset 276 " group.long 0x918++0x03 line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO283 ,CPU Targets Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO282 ,CPU Targets Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO281 ,CPU Targets Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO280 ,CPU Targets Byte Offset 280 " group.long 0x91C++0x03 line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO287 ,CPU Targets Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO286 ,CPU Targets Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO285 ,CPU Targets Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO284 ,CPU Targets Byte Offset 284 " else hgroup.long 0x900++0x03 hide.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hgroup.long 0x904++0x03 hide.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hgroup.long 0x908++0x03 hide.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hgroup.long 0x90C++0x03 hide.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hgroup.long 0x910++0x03 hide.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hgroup.long 0x914++0x03 hide.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hgroup.long 0x918++0x03 hide.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hgroup.long 0x91C++0x03 hide.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09) group.long 0x920++0x03 line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO291 ,CPU Targets Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO290 ,CPU Targets Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO289 ,CPU Targets Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO288 ,CPU Targets Byte Offset 288 " group.long 0x924++0x03 line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO295 ,CPU Targets Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO294 ,CPU Targets Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO293 ,CPU Targets Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO292 ,CPU Targets Byte Offset 292 " group.long 0x928++0x03 line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO299 ,CPU Targets Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO298 ,CPU Targets Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO297 ,CPU Targets Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO296 ,CPU Targets Byte Offset 296 " group.long 0x92C++0x03 line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO303 ,CPU Targets Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO302 ,CPU Targets Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO301 ,CPU Targets Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO300 ,CPU Targets Byte Offset 300 " group.long 0x930++0x03 line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO307 ,CPU Targets Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO306 ,CPU Targets Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO305 ,CPU Targets Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO304 ,CPU Targets Byte Offset 304 " group.long 0x934++0x03 line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO311 ,CPU Targets Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO310 ,CPU Targets Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO309 ,CPU Targets Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO308 ,CPU Targets Byte Offset 308 " group.long 0x938++0x03 line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO315 ,CPU Targets Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO314 ,CPU Targets Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO313 ,CPU Targets Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO312 ,CPU Targets Byte Offset 312 " group.long 0x93C++0x03 line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO319 ,CPU Targets Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO318 ,CPU Targets Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO317 ,CPU Targets Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO316 ,CPU Targets Byte Offset 316 " else hgroup.long 0x920++0x03 hide.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hgroup.long 0x924++0x03 hide.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hgroup.long 0x928++0x03 hide.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hgroup.long 0x92C++0x03 hide.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hgroup.long 0x930++0x03 hide.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hgroup.long 0x934++0x03 hide.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hgroup.long 0x938++0x03 hide.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hgroup.long 0x93C++0x03 hide.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A) group.long 0x940++0x03 line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO323 ,CPU Targets Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO322 ,CPU Targets Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO321 ,CPU Targets Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO320 ,CPU Targets Byte Offset 320 " group.long 0x944++0x03 line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO327 ,CPU Targets Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO326 ,CPU Targets Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO325 ,CPU Targets Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO324 ,CPU Targets Byte Offset 324 " group.long 0x948++0x03 line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO331 ,CPU Targets Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO330 ,CPU Targets Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO329 ,CPU Targets Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO328 ,CPU Targets Byte Offset 328 " group.long 0x94C++0x03 line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO335 ,CPU Targets Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO334 ,CPU Targets Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO333 ,CPU Targets Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO332 ,CPU Targets Byte Offset 332 " group.long 0x950++0x03 line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO339 ,CPU Targets Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO338 ,CPU Targets Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO337 ,CPU Targets Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO336 ,CPU Targets Byte Offset 336 " group.long 0x954++0x03 line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO343 ,CPU Targets Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO342 ,CPU Targets Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO341 ,CPU Targets Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO340 ,CPU Targets Byte Offset 340 " group.long 0x958++0x03 line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO347 ,CPU Targets Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO346 ,CPU Targets Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO345 ,CPU Targets Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO344 ,CPU Targets Byte Offset 344 " group.long 0x95C++0x03 line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO351 ,CPU Targets Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO350 ,CPU Targets Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO349 ,CPU Targets Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO348 ,CPU Targets Byte Offset 348 " else hgroup.long 0x940++0x03 hide.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hgroup.long 0x944++0x03 hide.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hgroup.long 0x948++0x03 hide.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hgroup.long 0x94C++0x03 hide.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hgroup.long 0x950++0x03 hide.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hgroup.long 0x954++0x03 hide.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hgroup.long 0x958++0x03 hide.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hgroup.long 0x95C++0x03 hide.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B) group.long 0x960++0x03 line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO355 ,CPU Targets Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO354 ,CPU Targets Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO353 ,CPU Targets Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO352 ,CPU Targets Byte Offset 352 " group.long 0x964++0x03 line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO359 ,CPU Targets Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO358 ,CPU Targets Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO357 ,CPU Targets Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO356 ,CPU Targets Byte Offset 356 " group.long 0x968++0x03 line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO363 ,CPU Targets Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO362 ,CPU Targets Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO361 ,CPU Targets Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO360 ,CPU Targets Byte Offset 360 " group.long 0x96C++0x03 line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO367 ,CPU Targets Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO366 ,CPU Targets Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO365 ,CPU Targets Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO364 ,CPU Targets Byte Offset 364 " group.long 0x970++0x03 line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO371 ,CPU Targets Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO370 ,CPU Targets Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO369 ,CPU Targets Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO368 ,CPU Targets Byte Offset 368 " group.long 0x974++0x03 line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO375 ,CPU Targets Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO374 ,CPU Targets Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO373 ,CPU Targets Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO372 ,CPU Targets Byte Offset 372 " group.long 0x978++0x03 line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO379 ,CPU Targets Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO378 ,CPU Targets Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO377 ,CPU Targets Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO376 ,CPU Targets Byte Offset 376 " group.long 0x97C++0x03 line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO383 ,CPU Targets Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO382 ,CPU Targets Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO381 ,CPU Targets Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO380 ,CPU Targets Byte Offset 380 " else hgroup.long 0x960++0x03 hide.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hgroup.long 0x964++0x03 hide.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hgroup.long 0x968++0x03 hide.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hgroup.long 0x96C++0x03 hide.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hgroup.long 0x970++0x03 hide.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hgroup.long 0x974++0x03 hide.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hgroup.long 0x978++0x03 hide.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hgroup.long 0x97C++0x03 hide.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C) group.long 0x980++0x03 line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO387 ,CPU Targets Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO386 ,CPU Targets Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO385 ,CPU Targets Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO384 ,CPU Targets Byte Offset 384 " group.long 0x984++0x03 line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO391 ,CPU Targets Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO390 ,CPU Targets Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO389 ,CPU Targets Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO388 ,CPU Targets Byte Offset 388 " group.long 0x988++0x03 line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO395 ,CPU Targets Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO394 ,CPU Targets Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO393 ,CPU Targets Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO392 ,CPU Targets Byte Offset 392 " group.long 0x98C++0x03 line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO399 ,CPU Targets Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO398 ,CPU Targets Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO397 ,CPU Targets Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO396 ,CPU Targets Byte Offset 396 " group.long 0x990++0x03 line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO403 ,CPU Targets Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO402 ,CPU Targets Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO401 ,CPU Targets Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO400 ,CPU Targets Byte Offset 400 " group.long 0x994++0x03 line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO407 ,CPU Targets Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO406 ,CPU Targets Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO405 ,CPU Targets Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO404 ,CPU Targets Byte Offset 404 " group.long 0x998++0x03 line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO411 ,CPU Targets Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO410 ,CPU Targets Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO409 ,CPU Targets Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO408 ,CPU Targets Byte Offset 408 " group.long 0x99C++0x03 line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO415 ,CPU Targets Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO414 ,CPU Targets Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO413 ,CPU Targets Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO412 ,CPU Targets Byte Offset 412 " else hgroup.long 0x980++0x03 hide.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hgroup.long 0x984++0x03 hide.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hgroup.long 0x988++0x03 hide.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hgroup.long 0x98C++0x03 hide.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hgroup.long 0x990++0x03 hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hgroup.long 0x994++0x03 hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hgroup.long 0x998++0x03 hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hgroup.long 0x99C++0x03 hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D) group.long 0x9A0++0x03 line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO419 ,CPU Targets Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO418 ,CPU Targets Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO417 ,CPU Targets Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO416 ,CPU Targets Byte Offset 416 " group.long 0x9A4++0x03 line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO423 ,CPU Targets Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO422 ,CPU Targets Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO421 ,CPU Targets Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO420 ,CPU Targets Byte Offset 420 " group.long 0x9A8++0x03 line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO427 ,CPU Targets Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO426 ,CPU Targets Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO425 ,CPU Targets Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO424 ,CPU Targets Byte Offset 424 " group.long 0x9AC++0x03 line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO431 ,CPU Targets Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO430 ,CPU Targets Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO429 ,CPU Targets Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO428 ,CPU Targets Byte Offset 428 " group.long 0x9B0++0x03 line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO435 ,CPU Targets Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO434 ,CPU Targets Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO433 ,CPU Targets Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO432 ,CPU Targets Byte Offset 432 " group.long 0x9B4++0x03 line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO439 ,CPU Targets Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO438 ,CPU Targets Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO437 ,CPU Targets Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO436 ,CPU Targets Byte Offset 436 " group.long 0x9B8++0x03 line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO443 ,CPU Targets Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO442 ,CPU Targets Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO441 ,CPU Targets Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO440 ,CPU Targets Byte Offset 440 " group.long 0x9BC++0x03 line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO447 ,CPU Targets Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO446 ,CPU Targets Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO445 ,CPU Targets Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO444 ,CPU Targets Byte Offset 444 " else hgroup.long 0x9A0++0x03 hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hgroup.long 0x9A4++0x03 hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hgroup.long 0x9A8++0x03 hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hgroup.long 0x9AC++0x03 hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hgroup.long 0x9B0++0x03 hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hgroup.long 0x9B4++0x03 hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hgroup.long 0x9B8++0x03 hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hgroup.long 0x9BC++0x03 hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E) group.long 0x9C0++0x03 line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO451 ,CPU Targets Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO450 ,CPU Targets Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO449 ,CPU Targets Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO448 ,CPU Targets Byte Offset 448 " group.long 0x9C4++0x03 line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO455 ,CPU Targets Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO454 ,CPU Targets Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO453 ,CPU Targets Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO452 ,CPU Targets Byte Offset 452 " group.long 0x9C8++0x03 line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO459 ,CPU Targets Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO458 ,CPU Targets Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO457 ,CPU Targets Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO456 ,CPU Targets Byte Offset 456 " group.long 0x9CC++0x03 line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO463 ,CPU Targets Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO462 ,CPU Targets Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO461 ,CPU Targets Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO460 ,CPU Targets Byte Offset 460 " group.long 0x9D0++0x03 line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO467 ,CPU Targets Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO466 ,CPU Targets Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO465 ,CPU Targets Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO464 ,CPU Targets Byte Offset 464 " group.long 0x9D4++0x03 line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO471 ,CPU Targets Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO470 ,CPU Targets Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO469 ,CPU Targets Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO468 ,CPU Targets Byte Offset 468 " group.long 0x9D8++0x03 line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO475 ,CPU Targets Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO474 ,CPU Targets Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO473 ,CPU Targets Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO472 ,CPU Targets Byte Offset 472 " group.long 0x9DC++0x03 line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO479 ,CPU Targets Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO478 ,CPU Targets Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO477 ,CPU Targets Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO476 ,CPU Targets Byte Offset 476 " else hgroup.long 0x9C0++0x03 hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hgroup.long 0x9C4++0x03 hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hgroup.long 0x9C8++0x03 hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hgroup.long 0x9CC++0x03 hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hgroup.long 0x9D0++0x03 hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hgroup.long 0x9D4++0x03 hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hgroup.long 0x9D8++0x03 hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hgroup.long 0x9DC++0x03 hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F) group.long 0x9E0++0x03 line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO483 ,CPU Targets Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO482 ,CPU Targets Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO481 ,CPU Targets Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO480 ,CPU Targets Byte Offset 480 " group.long 0x9E4++0x03 line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO487 ,CPU Targets Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO486 ,CPU Targets Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO485 ,CPU Targets Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO484 ,CPU Targets Byte Offset 484 " group.long 0x9E8++0x03 line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO491 ,CPU Targets Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO490 ,CPU Targets Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO489 ,CPU Targets Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO488 ,CPU Targets Byte Offset 488 " group.long 0x9EC++0x03 line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO495 ,CPU Targets Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO494 ,CPU Targets Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO493 ,CPU Targets Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO492 ,CPU Targets Byte Offset 492 " group.long 0x9F0++0x03 line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO499 ,CPU Targets Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO498 ,CPU Targets Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO497 ,CPU Targets Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO496 ,CPU Targets Byte Offset 496 " group.long 0x9F4++0x03 line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO503 ,CPU Targets Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO502 ,CPU Targets Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO501 ,CPU Targets Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO500 ,CPU Targets Byte Offset 500 " group.long 0x9F8++0x03 line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO507 ,CPU Targets Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO506 ,CPU Targets Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO505 ,CPU Targets Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO504 ,CPU Targets Byte Offset 504 " group.long 0x9FC++0x03 line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO511 ,CPU Targets Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO510 ,CPU Targets Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO509 ,CPU Targets Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO508 ,CPU Targets Byte Offset 508 " else hgroup.long 0x9E0++0x03 hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hgroup.long 0x9E4++0x03 hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hgroup.long 0x9E8++0x03 hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hgroup.long 0x9EC++0x03 hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hgroup.long 0x9F0++0x03 hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hgroup.long 0x9F4++0x03 hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hgroup.long 0x9F8++0x03 hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hgroup.long 0x9FC++0x03 hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) group.long 0xA00++0x03 line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO515 ,CPU Targets Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO514 ,CPU Targets Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO513 ,CPU Targets Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO512 ,CPU Targets Byte Offset 512 " group.long 0xA04++0x03 line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO519 ,CPU Targets Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO518 ,CPU Targets Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO517 ,CPU Targets Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO516 ,CPU Targets Byte Offset 516 " group.long 0xA08++0x03 line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO523 ,CPU Targets Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO522 ,CPU Targets Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO521 ,CPU Targets Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO520 ,CPU Targets Byte Offset 520 " group.long 0xA0C++0x03 line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO527 ,CPU Targets Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO526 ,CPU Targets Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO525 ,CPU Targets Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO524 ,CPU Targets Byte Offset 524 " group.long 0xA10++0x03 line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO531 ,CPU Targets Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO530 ,CPU Targets Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO529 ,CPU Targets Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO528 ,CPU Targets Byte Offset 528 " group.long 0xA14++0x03 line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO535 ,CPU Targets Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO534 ,CPU Targets Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO533 ,CPU Targets Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO532 ,CPU Targets Byte Offset 532 " group.long 0xA18++0x03 line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO539 ,CPU Targets Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO538 ,CPU Targets Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO537 ,CPU Targets Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO536 ,CPU Targets Byte Offset 536 " group.long 0xA1C++0x03 line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO543 ,CPU Targets Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO542 ,CPU Targets Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO541 ,CPU Targets Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO540 ,CPU Targets Byte Offset 540 " else hgroup.long 0xA00++0x03 hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hgroup.long 0xA04++0x03 hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hgroup.long 0xA08++0x03 hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hgroup.long 0xA0C++0x03 hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hgroup.long 0xA10++0x03 hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hgroup.long 0xA14++0x03 hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hgroup.long 0xA18++0x03 hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hgroup.long 0xA1C++0x03 hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) group.long 0xA20++0x03 line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO547 ,CPU Targets Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO546 ,CPU Targets Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO545 ,CPU Targets Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO544 ,CPU Targets Byte Offset 544 " group.long 0xA24++0x03 line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO551 ,CPU Targets Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO550 ,CPU Targets Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO549 ,CPU Targets Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO548 ,CPU Targets Byte Offset 548 " group.long 0xA28++0x03 line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO555 ,CPU Targets Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO554 ,CPU Targets Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO553 ,CPU Targets Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO552 ,CPU Targets Byte Offset 552 " group.long 0xA2C++0x03 line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO559 ,CPU Targets Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO558 ,CPU Targets Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO557 ,CPU Targets Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO556 ,CPU Targets Byte Offset 556 " group.long 0xA30++0x03 line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO563 ,CPU Targets Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO562 ,CPU Targets Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO561 ,CPU Targets Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO560 ,CPU Targets Byte Offset 560 " group.long 0xA34++0x03 line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO567 ,CPU Targets Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO566 ,CPU Targets Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO565 ,CPU Targets Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO564 ,CPU Targets Byte Offset 564 " group.long 0xA38++0x03 line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO571 ,CPU Targets Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO570 ,CPU Targets Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO569 ,CPU Targets Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO568 ,CPU Targets Byte Offset 568 " group.long 0xA3C++0x03 line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO575 ,CPU Targets Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO574 ,CPU Targets Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO573 ,CPU Targets Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO572 ,CPU Targets Byte Offset 572 " else hgroup.long 0xA20++0x03 hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hgroup.long 0xA24++0x03 hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hgroup.long 0xA28++0x03 hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hgroup.long 0xA2C++0x03 hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hgroup.long 0xA30++0x03 hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hgroup.long 0xA34++0x03 hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hgroup.long 0xA38++0x03 hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hgroup.long 0xA3C++0x03 hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) group.long 0xA40++0x03 line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO579 ,CPU Targets Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO578 ,CPU Targets Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO577 ,CPU Targets Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO576 ,CPU Targets Byte Offset 576 " group.long 0xA44++0x03 line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO583 ,CPU Targets Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO582 ,CPU Targets Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO581 ,CPU Targets Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO580 ,CPU Targets Byte Offset 580 " group.long 0xA48++0x03 line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO587 ,CPU Targets Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO586 ,CPU Targets Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO585 ,CPU Targets Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO584 ,CPU Targets Byte Offset 584 " group.long 0xA4C++0x03 line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO591 ,CPU Targets Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO590 ,CPU Targets Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO589 ,CPU Targets Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO588 ,CPU Targets Byte Offset 588 " group.long 0xA50++0x03 line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO595 ,CPU Targets Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO594 ,CPU Targets Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO593 ,CPU Targets Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO592 ,CPU Targets Byte Offset 592 " group.long 0xA54++0x03 line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO599 ,CPU Targets Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO598 ,CPU Targets Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO597 ,CPU Targets Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO596 ,CPU Targets Byte Offset 596 " group.long 0xA58++0x03 line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO603 ,CPU Targets Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO602 ,CPU Targets Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO601 ,CPU Targets Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO600 ,CPU Targets Byte Offset 600 " group.long 0xA5C++0x03 line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO607 ,CPU Targets Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO606 ,CPU Targets Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO605 ,CPU Targets Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO604 ,CPU Targets Byte Offset 604 " else hgroup.long 0xA40++0x03 hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hgroup.long 0xA44++0x03 hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hgroup.long 0xA48++0x03 hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hgroup.long 0xA4C++0x03 hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hgroup.long 0xA50++0x03 hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hgroup.long 0xA54++0x03 hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hgroup.long 0xA58++0x03 hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hgroup.long 0xA5C++0x03 hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) group.long 0xA60++0x03 line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO611 ,CPU Targets Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO610 ,CPU Targets Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO609 ,CPU Targets Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO608 ,CPU Targets Byte Offset 608 " group.long 0xA64++0x03 line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO615 ,CPU Targets Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO614 ,CPU Targets Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO613 ,CPU Targets Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO612 ,CPU Targets Byte Offset 612 " group.long 0xA68++0x03 line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO619 ,CPU Targets Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO618 ,CPU Targets Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO617 ,CPU Targets Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO616 ,CPU Targets Byte Offset 616 " group.long 0xA6C++0x03 line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO623 ,CPU Targets Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO622 ,CPU Targets Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO621 ,CPU Targets Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO620 ,CPU Targets Byte Offset 620 " group.long 0xA70++0x03 line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO627 ,CPU Targets Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO626 ,CPU Targets Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO625 ,CPU Targets Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO624 ,CPU Targets Byte Offset 624 " group.long 0xA74++0x03 line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO631 ,CPU Targets Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO630 ,CPU Targets Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO629 ,CPU Targets Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO628 ,CPU Targets Byte Offset 628 " group.long 0xA78++0x03 line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO635 ,CPU Targets Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO634 ,CPU Targets Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO633 ,CPU Targets Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO632 ,CPU Targets Byte Offset 632 " group.long 0xA7C++0x03 line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO639 ,CPU Targets Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO638 ,CPU Targets Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO637 ,CPU Targets Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO636 ,CPU Targets Byte Offset 636 " else hgroup.long 0xA60++0x03 hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hgroup.long 0xA64++0x03 hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hgroup.long 0xA68++0x03 hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hgroup.long 0xA6C++0x03 hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hgroup.long 0xA70++0x03 hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hgroup.long 0xA74++0x03 hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hgroup.long 0xA78++0x03 hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hgroup.long 0xA7C++0x03 hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) group.long 0xA80++0x03 line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO643 ,CPU Targets Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO642 ,CPU Targets Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO641 ,CPU Targets Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO640 ,CPU Targets Byte Offset 640 " group.long 0xA84++0x03 line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO647 ,CPU Targets Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO646 ,CPU Targets Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO645 ,CPU Targets Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO644 ,CPU Targets Byte Offset 644 " group.long 0xA88++0x03 line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO651 ,CPU Targets Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO650 ,CPU Targets Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO649 ,CPU Targets Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO648 ,CPU Targets Byte Offset 648 " group.long 0xA8C++0x03 line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO655 ,CPU Targets Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO654 ,CPU Targets Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO653 ,CPU Targets Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO652 ,CPU Targets Byte Offset 652 " group.long 0xA90++0x03 line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO659 ,CPU Targets Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO658 ,CPU Targets Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO657 ,CPU Targets Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO656 ,CPU Targets Byte Offset 656 " group.long 0xA94++0x03 line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO663 ,CPU Targets Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO662 ,CPU Targets Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO661 ,CPU Targets Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO660 ,CPU Targets Byte Offset 660 " group.long 0xA98++0x03 line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO667 ,CPU Targets Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO666 ,CPU Targets Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO665 ,CPU Targets Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO664 ,CPU Targets Byte Offset 664 " group.long 0xA9C++0x03 line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO671 ,CPU Targets Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO670 ,CPU Targets Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO669 ,CPU Targets Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO668 ,CPU Targets Byte Offset 668 " else hgroup.long 0xA80++0x03 hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hgroup.long 0xA84++0x03 hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hgroup.long 0xA88++0x03 hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hgroup.long 0xA8C++0x03 hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hgroup.long 0xA90++0x03 hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hgroup.long 0xA94++0x03 hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hgroup.long 0xA98++0x03 hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hgroup.long 0xA9C++0x03 hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) group.long 0xAA0++0x03 line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO675 ,CPU Targets Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO674 ,CPU Targets Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO673 ,CPU Targets Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO672 ,CPU Targets Byte Offset 672 " group.long 0xAA4++0x03 line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO679 ,CPU Targets Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO678 ,CPU Targets Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO677 ,CPU Targets Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO676 ,CPU Targets Byte Offset 676 " group.long 0xAA8++0x03 line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO683 ,CPU Targets Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO682 ,CPU Targets Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO681 ,CPU Targets Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO680 ,CPU Targets Byte Offset 680 " group.long 0xAAC++0x03 line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO687 ,CPU Targets Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO686 ,CPU Targets Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO685 ,CPU Targets Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO684 ,CPU Targets Byte Offset 684 " group.long 0xAB0++0x03 line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO691 ,CPU Targets Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO690 ,CPU Targets Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO689 ,CPU Targets Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO688 ,CPU Targets Byte Offset 688 " group.long 0xAB4++0x03 line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO695 ,CPU Targets Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO694 ,CPU Targets Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO693 ,CPU Targets Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO692 ,CPU Targets Byte Offset 692 " group.long 0xAB8++0x03 line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO699 ,CPU Targets Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO698 ,CPU Targets Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO697 ,CPU Targets Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO696 ,CPU Targets Byte Offset 696 " group.long 0xABC++0x03 line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO703 ,CPU Targets Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO702 ,CPU Targets Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO701 ,CPU Targets Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO700 ,CPU Targets Byte Offset 700 " else hgroup.long 0xAA0++0x03 hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hgroup.long 0xAA4++0x03 hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hgroup.long 0xAA8++0x03 hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hgroup.long 0xAAC++0x03 hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hgroup.long 0xAB0++0x03 hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hgroup.long 0xAB4++0x03 hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hgroup.long 0xAB8++0x03 hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hgroup.long 0xABC++0x03 hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) group.long 0xAC0++0x03 line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO707 ,CPU Targets Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO706 ,CPU Targets Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO705 ,CPU Targets Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO704 ,CPU Targets Byte Offset 704 " group.long 0xAC4++0x03 line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO711 ,CPU Targets Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO710 ,CPU Targets Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO709 ,CPU Targets Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO708 ,CPU Targets Byte Offset 708 " group.long 0xAC8++0x03 line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO715 ,CPU Targets Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO714 ,CPU Targets Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO713 ,CPU Targets Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO712 ,CPU Targets Byte Offset 712 " group.long 0xACC++0x03 line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO719 ,CPU Targets Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO718 ,CPU Targets Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO717 ,CPU Targets Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO716 ,CPU Targets Byte Offset 716 " group.long 0xAD0++0x03 line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO723 ,CPU Targets Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO722 ,CPU Targets Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO721 ,CPU Targets Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO720 ,CPU Targets Byte Offset 720 " group.long 0xAD4++0x03 line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO727 ,CPU Targets Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO726 ,CPU Targets Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO725 ,CPU Targets Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO724 ,CPU Targets Byte Offset 724 " group.long 0xAD8++0x03 line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO731 ,CPU Targets Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO730 ,CPU Targets Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO729 ,CPU Targets Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO728 ,CPU Targets Byte Offset 728 " group.long 0xADC++0x03 line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO735 ,CPU Targets Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO734 ,CPU Targets Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO733 ,CPU Targets Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO732 ,CPU Targets Byte Offset 732 " else hgroup.long 0xAC0++0x03 hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hgroup.long 0xAC4++0x03 hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hgroup.long 0xAC8++0x03 hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hgroup.long 0xACC++0x03 hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hgroup.long 0xAD0++0x03 hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hgroup.long 0xAD4++0x03 hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hgroup.long 0xAD8++0x03 hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hgroup.long 0xADC++0x03 hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) group.long 0xAE0++0x03 line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO739 ,CPU Targets Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO738 ,CPU Targets Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO737 ,CPU Targets Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO736 ,CPU Targets Byte Offset 736 " group.long 0xAE4++0x03 line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO743 ,CPU Targets Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO742 ,CPU Targets Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO741 ,CPU Targets Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO740 ,CPU Targets Byte Offset 740 " group.long 0xAE8++0x03 line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO747 ,CPU Targets Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO746 ,CPU Targets Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO745 ,CPU Targets Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO744 ,CPU Targets Byte Offset 744 " group.long 0xAEC++0x03 line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO751 ,CPU Targets Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO750 ,CPU Targets Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO749 ,CPU Targets Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO748 ,CPU Targets Byte Offset 748 " group.long 0xAF0++0x03 line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO755 ,CPU Targets Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO754 ,CPU Targets Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO753 ,CPU Targets Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO752 ,CPU Targets Byte Offset 752 " group.long 0xAF4++0x03 line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO759 ,CPU Targets Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO758 ,CPU Targets Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO757 ,CPU Targets Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO756 ,CPU Targets Byte Offset 756 " group.long 0xAF8++0x03 line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO763 ,CPU Targets Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO762 ,CPU Targets Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO761 ,CPU Targets Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO760 ,CPU Targets Byte Offset 760 " group.long 0xAFC++0x03 line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO767 ,CPU Targets Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO766 ,CPU Targets Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO765 ,CPU Targets Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO764 ,CPU Targets Byte Offset 764 " else hgroup.long 0xAE0++0x03 hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hgroup.long 0xAE4++0x03 hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hgroup.long 0xAE8++0x03 hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hgroup.long 0xAEC++0x03 hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hgroup.long 0xAF0++0x03 hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hgroup.long 0xAF4++0x03 hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hgroup.long 0xAF8++0x03 hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hgroup.long 0xAFC++0x03 hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) group.long 0xB00++0x03 line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO771 ,CPU Targets Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO770 ,CPU Targets Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO769 ,CPU Targets Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO768 ,CPU Targets Byte Offset 768 " group.long 0xB04++0x03 line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO775 ,CPU Targets Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO774 ,CPU Targets Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO773 ,CPU Targets Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO772 ,CPU Targets Byte Offset 772 " group.long 0xB08++0x03 line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO779 ,CPU Targets Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO778 ,CPU Targets Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO777 ,CPU Targets Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO776 ,CPU Targets Byte Offset 776 " group.long 0xB0C++0x03 line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO783 ,CPU Targets Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO782 ,CPU Targets Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO781 ,CPU Targets Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO780 ,CPU Targets Byte Offset 780 " group.long 0xB10++0x03 line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO787 ,CPU Targets Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO786 ,CPU Targets Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO785 ,CPU Targets Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO784 ,CPU Targets Byte Offset 784 " group.long 0xB14++0x03 line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO791 ,CPU Targets Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO790 ,CPU Targets Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO789 ,CPU Targets Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO788 ,CPU Targets Byte Offset 788 " group.long 0xB18++0x03 line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO795 ,CPU Targets Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO794 ,CPU Targets Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO793 ,CPU Targets Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO792 ,CPU Targets Byte Offset 792 " group.long 0xB1C++0x03 line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO799 ,CPU Targets Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO798 ,CPU Targets Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO797 ,CPU Targets Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO796 ,CPU Targets Byte Offset 796 " else hgroup.long 0xB00++0x03 hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hgroup.long 0xB04++0x03 hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hgroup.long 0xB08++0x03 hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hgroup.long 0xB0C++0x03 hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hgroup.long 0xB10++0x03 hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hgroup.long 0xB14++0x03 hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hgroup.long 0xB18++0x03 hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hgroup.long 0xB1C++0x03 hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) group.long 0xB20++0x03 line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO803 ,CPU Targets Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO802 ,CPU Targets Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO801 ,CPU Targets Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO800 ,CPU Targets Byte Offset 800 " group.long 0xB24++0x03 line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO807 ,CPU Targets Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO806 ,CPU Targets Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO805 ,CPU Targets Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO804 ,CPU Targets Byte Offset 804 " group.long 0xB28++0x03 line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO811 ,CPU Targets Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO810 ,CPU Targets Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO809 ,CPU Targets Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO808 ,CPU Targets Byte Offset 808 " group.long 0xB2C++0x03 line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO815 ,CPU Targets Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO814 ,CPU Targets Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO813 ,CPU Targets Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO812 ,CPU Targets Byte Offset 812 " group.long 0xB30++0x03 line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO819 ,CPU Targets Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO818 ,CPU Targets Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO817 ,CPU Targets Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO816 ,CPU Targets Byte Offset 816 " group.long 0xB34++0x03 line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO823 ,CPU Targets Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO822 ,CPU Targets Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO821 ,CPU Targets Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO820 ,CPU Targets Byte Offset 820 " group.long 0xB38++0x03 line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO827 ,CPU Targets Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO826 ,CPU Targets Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO825 ,CPU Targets Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO824 ,CPU Targets Byte Offset 824 " group.long 0xB3C++0x03 line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO831 ,CPU Targets Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO830 ,CPU Targets Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO829 ,CPU Targets Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO828 ,CPU Targets Byte Offset 828 " else hgroup.long 0xB20++0x03 hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hgroup.long 0xB24++0x03 hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hgroup.long 0xB28++0x03 hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hgroup.long 0xB2C++0x03 hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hgroup.long 0xB30++0x03 hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hgroup.long 0xB34++0x03 hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hgroup.long 0xB38++0x03 hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hgroup.long 0xB3C++0x03 hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) group.long 0xB40++0x03 line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO835 ,CPU Targets Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO834 ,CPU Targets Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO833 ,CPU Targets Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO832 ,CPU Targets Byte Offset 832 " group.long 0xB44++0x03 line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO839 ,CPU Targets Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO838 ,CPU Targets Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO837 ,CPU Targets Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO836 ,CPU Targets Byte Offset 836 " group.long 0xB48++0x03 line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO843 ,CPU Targets Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO842 ,CPU Targets Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO841 ,CPU Targets Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO840 ,CPU Targets Byte Offset 840 " group.long 0xB4C++0x03 line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO847 ,CPU Targets Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO846 ,CPU Targets Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO845 ,CPU Targets Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO844 ,CPU Targets Byte Offset 844 " group.long 0xB50++0x03 line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO851 ,CPU Targets Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO850 ,CPU Targets Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO849 ,CPU Targets Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO848 ,CPU Targets Byte Offset 848 " group.long 0xB54++0x03 line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO855 ,CPU Targets Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO854 ,CPU Targets Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO853 ,CPU Targets Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO852 ,CPU Targets Byte Offset 852 " group.long 0xB58++0x03 line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO859 ,CPU Targets Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO858 ,CPU Targets Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO857 ,CPU Targets Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO856 ,CPU Targets Byte Offset 856 " group.long 0xB5C++0x03 line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO863 ,CPU Targets Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO862 ,CPU Targets Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO861 ,CPU Targets Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO860 ,CPU Targets Byte Offset 860 " else hgroup.long 0xB40++0x03 hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hgroup.long 0xB44++0x03 hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hgroup.long 0xB48++0x03 hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hgroup.long 0xB4C++0x03 hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hgroup.long 0xB50++0x03 hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hgroup.long 0xB54++0x03 hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hgroup.long 0xB58++0x03 hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hgroup.long 0xB5C++0x03 hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) group.long 0xB60++0x03 line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO867 ,CPU Targets Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO866 ,CPU Targets Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO865 ,CPU Targets Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO864 ,CPU Targets Byte Offset 864 " group.long 0xB64++0x03 line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO871 ,CPU Targets Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO870 ,CPU Targets Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO869 ,CPU Targets Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO868 ,CPU Targets Byte Offset 868 " group.long 0xB68++0x03 line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO875 ,CPU Targets Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO874 ,CPU Targets Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO873 ,CPU Targets Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO872 ,CPU Targets Byte Offset 872 " group.long 0xB6C++0x03 line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO879 ,CPU Targets Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO878 ,CPU Targets Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO877 ,CPU Targets Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO876 ,CPU Targets Byte Offset 876 " group.long 0xB70++0x03 line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO883 ,CPU Targets Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO882 ,CPU Targets Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO881 ,CPU Targets Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO880 ,CPU Targets Byte Offset 880 " group.long 0xB74++0x03 line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO887 ,CPU Targets Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO886 ,CPU Targets Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO885 ,CPU Targets Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO884 ,CPU Targets Byte Offset 884 " group.long 0xB78++0x03 line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO891 ,CPU Targets Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO890 ,CPU Targets Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO889 ,CPU Targets Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO888 ,CPU Targets Byte Offset 888 " group.long 0xB7C++0x03 line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO895 ,CPU Targets Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO894 ,CPU Targets Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO893 ,CPU Targets Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO892 ,CPU Targets Byte Offset 892 " else hgroup.long 0xB60++0x03 hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hgroup.long 0xB64++0x03 hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hgroup.long 0xB68++0x03 hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hgroup.long 0xB6C++0x03 hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hgroup.long 0xB70++0x03 hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hgroup.long 0xB74++0x03 hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hgroup.long 0xB78++0x03 hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hgroup.long 0xB7C++0x03 hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) group.long 0xB80++0x03 line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO899 ,CPU Targets Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO898 ,CPU Targets Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO897 ,CPU Targets Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO896 ,CPU Targets Byte Offset 896 " group.long 0xB84++0x03 line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO903 ,CPU Targets Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO902 ,CPU Targets Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO901 ,CPU Targets Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO900 ,CPU Targets Byte Offset 900 " group.long 0xB88++0x03 line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO907 ,CPU Targets Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO906 ,CPU Targets Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO905 ,CPU Targets Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO904 ,CPU Targets Byte Offset 904 " group.long 0xB8C++0x03 line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO911 ,CPU Targets Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO910 ,CPU Targets Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO909 ,CPU Targets Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO908 ,CPU Targets Byte Offset 908 " group.long 0xB90++0x03 line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO915 ,CPU Targets Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO914 ,CPU Targets Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO913 ,CPU Targets Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO912 ,CPU Targets Byte Offset 912 " group.long 0xB94++0x03 line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO919 ,CPU Targets Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO918 ,CPU Targets Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO917 ,CPU Targets Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO916 ,CPU Targets Byte Offset 916 " group.long 0xB98++0x03 line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO923 ,CPU Targets Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO922 ,CPU Targets Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO921 ,CPU Targets Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO920 ,CPU Targets Byte Offset 920 " group.long 0xB9C++0x03 line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO927 ,CPU Targets Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO926 ,CPU Targets Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO925 ,CPU Targets Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO924 ,CPU Targets Byte Offset 924 " else hgroup.long 0xB80++0x03 hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hgroup.long 0xB84++0x03 hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hgroup.long 0xB88++0x03 hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hgroup.long 0xB8C++0x03 hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hgroup.long 0xB90++0x03 hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hgroup.long 0xB94++0x03 hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hgroup.long 0xB98++0x03 hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hgroup.long 0xB9C++0x03 hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) group.long 0xBA0++0x03 line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO931 ,CPU Targets Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO930 ,CPU Targets Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO929 ,CPU Targets Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO928 ,CPU Targets Byte Offset 928 " group.long 0xBA4++0x03 line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO935 ,CPU Targets Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO934 ,CPU Targets Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO933 ,CPU Targets Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO932 ,CPU Targets Byte Offset 932 " group.long 0xBA8++0x03 line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO939 ,CPU Targets Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO938 ,CPU Targets Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO937 ,CPU Targets Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO936 ,CPU Targets Byte Offset 936 " group.long 0xBAC++0x03 line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO943 ,CPU Targets Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO942 ,CPU Targets Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO941 ,CPU Targets Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO940 ,CPU Targets Byte Offset 940 " group.long 0xBB0++0x03 line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO947 ,CPU Targets Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO946 ,CPU Targets Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO945 ,CPU Targets Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO944 ,CPU Targets Byte Offset 944 " group.long 0xBB4++0x03 line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO951 ,CPU Targets Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO950 ,CPU Targets Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO949 ,CPU Targets Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO948 ,CPU Targets Byte Offset 948 " group.long 0xBB8++0x03 line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO955 ,CPU Targets Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO954 ,CPU Targets Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO953 ,CPU Targets Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO952 ,CPU Targets Byte Offset 952 " group.long 0xBBC++0x03 line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO959 ,CPU Targets Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO958 ,CPU Targets Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO957 ,CPU Targets Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO956 ,CPU Targets Byte Offset 956 " else hgroup.long 0xBA0++0x03 hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hgroup.long 0xBA4++0x03 hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hgroup.long 0xBA8++0x03 hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hgroup.long 0xBAC++0x03 hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hgroup.long 0xBB0++0x03 hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hgroup.long 0xBB4++0x03 hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hgroup.long 0xBB8++0x03 hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hgroup.long 0xBBC++0x03 hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) group.long 0xBC0++0x03 line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO963 ,CPU Targets Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO962 ,CPU Targets Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO961 ,CPU Targets Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO960 ,CPU Targets Byte Offset 960 " group.long 0xBC4++0x03 line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO967 ,CPU Targets Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO966 ,CPU Targets Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO965 ,CPU Targets Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO964 ,CPU Targets Byte Offset 964 " group.long 0xBC8++0x03 line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO971 ,CPU Targets Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO970 ,CPU Targets Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO969 ,CPU Targets Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO968 ,CPU Targets Byte Offset 968 " group.long 0xBCC++0x03 line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO975 ,CPU Targets Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO974 ,CPU Targets Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO973 ,CPU Targets Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO972 ,CPU Targets Byte Offset 972 " group.long 0xBD0++0x03 line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO979 ,CPU Targets Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO978 ,CPU Targets Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO977 ,CPU Targets Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO976 ,CPU Targets Byte Offset 976 " group.long 0xBD4++0x03 line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO983 ,CPU Targets Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO982 ,CPU Targets Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO981 ,CPU Targets Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO980 ,CPU Targets Byte Offset 980 " group.long 0xBD8++0x03 line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO987 ,CPU Targets Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO986 ,CPU Targets Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO985 ,CPU Targets Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO984 ,CPU Targets Byte Offset 984 " group.long 0xBDC++0x03 line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO991 ,CPU Targets Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO990 ,CPU Targets Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO989 ,CPU Targets Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO988 ,CPU Targets Byte Offset 988 " else hgroup.long 0xBC0++0x03 hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hgroup.long 0xBC4++0x03 hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hgroup.long 0xBC8++0x03 hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hgroup.long 0xBCC++0x03 hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hgroup.long 0xBD0++0x03 hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hgroup.long 0xBD4++0x03 hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hgroup.long 0xBD8++0x03 hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hgroup.long 0xBDC++0x03 hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" endif else hgroup.long 0x800++0x03 hide.long 0x00 "GICD_ITARGETSR0 ,Interrupt Processor Targets Register 0 " hgroup.long 0x804++0x03 hide.long 0x00 "GICD_ITARGETSR1 ,Interrupt Processor Targets Register 1 " hgroup.long 0x808++0x03 hide.long 0x00 "GICD_ITARGETSR2 ,Interrupt Processor Targets Register 2 " hgroup.long 0x80C++0x03 hide.long 0x00 "GICD_ITARGETSR3 ,Interrupt Processor Targets Register 3 " hgroup.long 0x810++0x03 hide.long 0x00 "GICD_ITARGETSR4 ,Interrupt Processor Targets Register 4 " hgroup.long 0x814++0x03 hide.long 0x00 "GICD_ITARGETSR5 ,Interrupt Processor Targets Register 5 " hgroup.long 0x818++0x03 hide.long 0x00 "GICD_ITARGETSR6 ,Interrupt Processor Targets Register 6 " hgroup.long 0x81C++0x03 hide.long 0x00 "GICD_ITARGETSR7 ,Interrupt Processor Targets Register 7 " hgroup.long 0x820++0x03 hide.long 0x00 "GICD_ITARGETSR8 ,Interrupt Processor Targets Register 8 " hgroup.long 0x824++0x03 hide.long 0x00 "GICD_ITARGETSR9 ,Interrupt Processor Targets Register 9 " hgroup.long 0x828++0x03 hide.long 0x00 "GICD_ITARGETSR10 ,Interrupt Processor Targets Register 10 " hgroup.long 0x82C++0x03 hide.long 0x00 "GICD_ITARGETSR11 ,Interrupt Processor Targets Register 11 " hgroup.long 0x830++0x03 hide.long 0x00 "GICD_ITARGETSR12 ,Interrupt Processor Targets Register 12 " hgroup.long 0x834++0x03 hide.long 0x00 "GICD_ITARGETSR13 ,Interrupt Processor Targets Register 13 " hgroup.long 0x838++0x03 hide.long 0x00 "GICD_ITARGETSR14 ,Interrupt Processor Targets Register 14 " hgroup.long 0x83C++0x03 hide.long 0x00 "GICD_ITARGETSR15 ,Interrupt Processor Targets Register 15 " hgroup.long 0x840++0x03 hide.long 0x00 "GICD_ITARGETSR16 ,Interrupt Processor Targets Register 16 " hgroup.long 0x844++0x03 hide.long 0x00 "GICD_ITARGETSR17 ,Interrupt Processor Targets Register 17 " hgroup.long 0x848++0x03 hide.long 0x00 "GICD_ITARGETSR18 ,Interrupt Processor Targets Register 18 " hgroup.long 0x84C++0x03 hide.long 0x00 "GICD_ITARGETSR19 ,Interrupt Processor Targets Register 19 " hgroup.long 0x850++0x03 hide.long 0x00 "GICD_ITARGETSR20 ,Interrupt Processor Targets Register 20 " hgroup.long 0x854++0x03 hide.long 0x00 "GICD_ITARGETSR21 ,Interrupt Processor Targets Register 21 " hgroup.long 0x858++0x03 hide.long 0x00 "GICD_ITARGETSR22 ,Interrupt Processor Targets Register 22 " hgroup.long 0x85C++0x03 hide.long 0x00 "GICD_ITARGETSR23 ,Interrupt Processor Targets Register 23 " hgroup.long 0x860++0x03 hide.long 0x00 "GICD_ITARGETSR24 ,Interrupt Processor Targets Register 24 " hgroup.long 0x864++0x03 hide.long 0x00 "GICD_ITARGETSR25 ,Interrupt Processor Targets Register 25 " hgroup.long 0x868++0x03 hide.long 0x00 "GICD_ITARGETSR26 ,Interrupt Processor Targets Register 26 " hgroup.long 0x86C++0x03 hide.long 0x00 "GICD_ITARGETSR27 ,Interrupt Processor Targets Register 27 " hgroup.long 0x870++0x03 hide.long 0x00 "GICD_ITARGETSR28 ,Interrupt Processor Targets Register 28 " hgroup.long 0x874++0x03 hide.long 0x00 "GICD_ITARGETSR29 ,Interrupt Processor Targets Register 29 " hgroup.long 0x878++0x03 hide.long 0x00 "GICD_ITARGETSR30 ,Interrupt Processor Targets Register 30 " hgroup.long 0x87C++0x03 hide.long 0x00 "GICD_ITARGETSR31 ,Interrupt Processor Targets Register 31 " hgroup.long 0x880++0x03 hide.long 0x00 "GICD_ITARGETSR32 ,Interrupt Processor Targets Register 32 " hgroup.long 0x884++0x03 hide.long 0x00 "GICD_ITARGETSR33 ,Interrupt Processor Targets Register 33 " hgroup.long 0x888++0x03 hide.long 0x00 "GICD_ITARGETSR34 ,Interrupt Processor Targets Register 34 " hgroup.long 0x88C++0x03 hide.long 0x00 "GICD_ITARGETSR35 ,Interrupt Processor Targets Register 35 " hgroup.long 0x890++0x03 hide.long 0x00 "GICD_ITARGETSR36 ,Interrupt Processor Targets Register 36 " hgroup.long 0x894++0x03 hide.long 0x00 "GICD_ITARGETSR37 ,Interrupt Processor Targets Register 37 " hgroup.long 0x898++0x03 hide.long 0x00 "GICD_ITARGETSR38 ,Interrupt Processor Targets Register 38 " hgroup.long 0x89C++0x03 hide.long 0x00 "GICD_ITARGETSR39 ,Interrupt Processor Targets Register 39 " hgroup.long 0x8A0++0x03 hide.long 0x00 "GICD_ITARGETSR40 ,Interrupt Processor Targets Register 40 " hgroup.long 0x8A4++0x03 hide.long 0x00 "GICD_ITARGETSR41 ,Interrupt Processor Targets Register 41 " hgroup.long 0x8A8++0x03 hide.long 0x00 "GICD_ITARGETSR42 ,Interrupt Processor Targets Register 42 " hgroup.long 0x8AC++0x03 hide.long 0x00 "GICD_ITARGETSR43 ,Interrupt Processor Targets Register 43 " hgroup.long 0x8B0++0x03 hide.long 0x00 "GICD_ITARGETSR44 ,Interrupt Processor Targets Register 44 " hgroup.long 0x8B4++0x03 hide.long 0x00 "GICD_ITARGETSR45 ,Interrupt Processor Targets Register 45 " hgroup.long 0x8B8++0x03 hide.long 0x00 "GICD_ITARGETSR46 ,Interrupt Processor Targets Register 46 " hgroup.long 0x8BC++0x03 hide.long 0x00 "GICD_ITARGETSR47 ,Interrupt Processor Targets Register 47 " hgroup.long 0x8C0++0x03 hide.long 0x00 "GICD_ITARGETSR48 ,Interrupt Processor Targets Register 48 " hgroup.long 0x8C4++0x03 hide.long 0x00 "GICD_ITARGETSR49 ,Interrupt Processor Targets Register 49 " hgroup.long 0x8C8++0x03 hide.long 0x00 "GICD_ITARGETSR50 ,Interrupt Processor Targets Register 50 " hgroup.long 0x8CC++0x03 hide.long 0x00 "GICD_ITARGETSR51 ,Interrupt Processor Targets Register 51 " hgroup.long 0x8D0++0x03 hide.long 0x00 "GICD_ITARGETSR52 ,Interrupt Processor Targets Register 52 " hgroup.long 0x8D4++0x03 hide.long 0x00 "GICD_ITARGETSR53 ,Interrupt Processor Targets Register 53 " hgroup.long 0x8D8++0x03 hide.long 0x00 "GICD_ITARGETSR54 ,Interrupt Processor Targets Register 54 " hgroup.long 0x8DC++0x03 hide.long 0x00 "GICD_ITARGETSR55 ,Interrupt Processor Targets Register 55 " hgroup.long 0x8E0++0x03 hide.long 0x00 "GICD_ITARGETSR56 ,Interrupt Processor Targets Register 56 " hgroup.long 0x8E4++0x03 hide.long 0x00 "GICD_ITARGETSR57 ,Interrupt Processor Targets Register 57 " hgroup.long 0x8E8++0x03 hide.long 0x00 "GICD_ITARGETSR58 ,Interrupt Processor Targets Register 58 " hgroup.long 0x8EC++0x03 hide.long 0x00 "GICD_ITARGETSR59 ,Interrupt Processor Targets Register 59 " hgroup.long 0x8F0++0x03 hide.long 0x00 "GICD_ITARGETSR60 ,Interrupt Processor Targets Register 60 " hgroup.long 0x8F4++0x03 hide.long 0x00 "GICD_ITARGETSR61 ,Interrupt Processor Targets Register 61 " hgroup.long 0x8F8++0x03 hide.long 0x00 "GICD_ITARGETSR62 ,Interrupt Processor Targets Register 62 " hgroup.long 0x8FC++0x03 hide.long 0x00 "GICD_ITARGETSR63 ,Interrupt Processor Targets Register 63 " hgroup.long 0x900++0x03 hide.long 0x00 "GICD_ITARGETSR64 ,Interrupt Processor Targets Register 64 " hgroup.long 0x904++0x03 hide.long 0x00 "GICD_ITARGETSR65 ,Interrupt Processor Targets Register 65 " hgroup.long 0x908++0x03 hide.long 0x00 "GICD_ITARGETSR66 ,Interrupt Processor Targets Register 66 " hgroup.long 0x90C++0x03 hide.long 0x00 "GICD_ITARGETSR67 ,Interrupt Processor Targets Register 67 " hgroup.long 0x910++0x03 hide.long 0x00 "GICD_ITARGETSR68 ,Interrupt Processor Targets Register 68 " hgroup.long 0x914++0x03 hide.long 0x00 "GICD_ITARGETSR69 ,Interrupt Processor Targets Register 69 " hgroup.long 0x918++0x03 hide.long 0x00 "GICD_ITARGETSR70 ,Interrupt Processor Targets Register 70 " hgroup.long 0x91C++0x03 hide.long 0x00 "GICD_ITARGETSR71 ,Interrupt Processor Targets Register 71 " hgroup.long 0x920++0x03 hide.long 0x00 "GICD_ITARGETSR72 ,Interrupt Processor Targets Register 72 " hgroup.long 0x924++0x03 hide.long 0x00 "GICD_ITARGETSR73 ,Interrupt Processor Targets Register 73 " hgroup.long 0x928++0x03 hide.long 0x00 "GICD_ITARGETSR74 ,Interrupt Processor Targets Register 74 " hgroup.long 0x92C++0x03 hide.long 0x00 "GICD_ITARGETSR75 ,Interrupt Processor Targets Register 75 " hgroup.long 0x930++0x03 hide.long 0x00 "GICD_ITARGETSR76 ,Interrupt Processor Targets Register 76 " hgroup.long 0x934++0x03 hide.long 0x00 "GICD_ITARGETSR77 ,Interrupt Processor Targets Register 77 " hgroup.long 0x938++0x03 hide.long 0x00 "GICD_ITARGETSR78 ,Interrupt Processor Targets Register 78 " hgroup.long 0x93C++0x03 hide.long 0x00 "GICD_ITARGETSR79 ,Interrupt Processor Targets Register 79 " hgroup.long 0x940++0x03 hide.long 0x00 "GICD_ITARGETSR80 ,Interrupt Processor Targets Register 80 " hgroup.long 0x944++0x03 hide.long 0x00 "GICD_ITARGETSR81 ,Interrupt Processor Targets Register 81 " hgroup.long 0x948++0x03 hide.long 0x00 "GICD_ITARGETSR82 ,Interrupt Processor Targets Register 82 " hgroup.long 0x94C++0x03 hide.long 0x00 "GICD_ITARGETSR83 ,Interrupt Processor Targets Register 83 " hgroup.long 0x950++0x03 hide.long 0x00 "GICD_ITARGETSR84 ,Interrupt Processor Targets Register 84 " hgroup.long 0x954++0x03 hide.long 0x00 "GICD_ITARGETSR85 ,Interrupt Processor Targets Register 85 " hgroup.long 0x958++0x03 hide.long 0x00 "GICD_ITARGETSR86 ,Interrupt Processor Targets Register 86 " hgroup.long 0x95C++0x03 hide.long 0x00 "GICD_ITARGETSR87 ,Interrupt Processor Targets Register 87 " hgroup.long 0x960++0x03 hide.long 0x00 "GICD_ITARGETSR88 ,Interrupt Processor Targets Register 88 " hgroup.long 0x964++0x03 hide.long 0x00 "GICD_ITARGETSR89 ,Interrupt Processor Targets Register 89 " hgroup.long 0x968++0x03 hide.long 0x00 "GICD_ITARGETSR90 ,Interrupt Processor Targets Register 90 " hgroup.long 0x96C++0x03 hide.long 0x00 "GICD_ITARGETSR91 ,Interrupt Processor Targets Register 91 " hgroup.long 0x970++0x03 hide.long 0x00 "GICD_ITARGETSR92 ,Interrupt Processor Targets Register 92 " hgroup.long 0x974++0x03 hide.long 0x00 "GICD_ITARGETSR93 ,Interrupt Processor Targets Register 93 " hgroup.long 0x978++0x03 hide.long 0x00 "GICD_ITARGETSR94 ,Interrupt Processor Targets Register 94 " hgroup.long 0x97C++0x03 hide.long 0x00 "GICD_ITARGETSR95 ,Interrupt Processor Targets Register 95 " hgroup.long 0x980++0x03 hide.long 0x00 "GICD_ITARGETSR96 ,Interrupt Processor Targets Register 96 " hgroup.long 0x984++0x03 hide.long 0x00 "GICD_ITARGETSR97 ,Interrupt Processor Targets Register 97 " hgroup.long 0x988++0x03 hide.long 0x00 "GICD_ITARGETSR98 ,Interrupt Processor Targets Register 98 " hgroup.long 0x98C++0x03 hide.long 0x00 "GICD_ITARGETSR99 ,Interrupt Processor Targets Register 99 " hgroup.long 0x990++0x03 hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hgroup.long 0x994++0x03 hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hgroup.long 0x998++0x03 hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hgroup.long 0x99C++0x03 hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hgroup.long 0x9A0++0x03 hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hgroup.long 0x9A4++0x03 hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hgroup.long 0x9A8++0x03 hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hgroup.long 0x9AC++0x03 hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hgroup.long 0x9B0++0x03 hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hgroup.long 0x9B4++0x03 hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hgroup.long 0x9B8++0x03 hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hgroup.long 0x9BC++0x03 hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hgroup.long 0x9C0++0x03 hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hgroup.long 0x9C4++0x03 hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hgroup.long 0x9C8++0x03 hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hgroup.long 0x9CC++0x03 hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hgroup.long 0x9D0++0x03 hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hgroup.long 0x9D4++0x03 hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hgroup.long 0x9D8++0x03 hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hgroup.long 0x9DC++0x03 hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hgroup.long 0x9E0++0x03 hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hgroup.long 0x9E4++0x03 hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hgroup.long 0x9E8++0x03 hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hgroup.long 0x9EC++0x03 hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hgroup.long 0x9F0++0x03 hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hgroup.long 0x9F4++0x03 hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hgroup.long 0x9F8++0x03 hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hgroup.long 0x9FC++0x03 hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hgroup.long 0xA00++0x03 hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hgroup.long 0xA04++0x03 hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hgroup.long 0xA08++0x03 hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hgroup.long 0xA0C++0x03 hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hgroup.long 0xA10++0x03 hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hgroup.long 0xA14++0x03 hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hgroup.long 0xA18++0x03 hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hgroup.long 0xA1C++0x03 hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hgroup.long 0xA20++0x03 hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hgroup.long 0xA24++0x03 hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hgroup.long 0xA28++0x03 hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hgroup.long 0xA2C++0x03 hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hgroup.long 0xA30++0x03 hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hgroup.long 0xA34++0x03 hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hgroup.long 0xA38++0x03 hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hgroup.long 0xA3C++0x03 hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hgroup.long 0xA40++0x03 hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hgroup.long 0xA44++0x03 hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hgroup.long 0xA48++0x03 hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hgroup.long 0xA4C++0x03 hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hgroup.long 0xA50++0x03 hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hgroup.long 0xA54++0x03 hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hgroup.long 0xA58++0x03 hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hgroup.long 0xA5C++0x03 hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hgroup.long 0xA60++0x03 hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hgroup.long 0xA64++0x03 hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hgroup.long 0xA68++0x03 hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hgroup.long 0xA6C++0x03 hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hgroup.long 0xA70++0x03 hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hgroup.long 0xA74++0x03 hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hgroup.long 0xA78++0x03 hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hgroup.long 0xA7C++0x03 hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hgroup.long 0xA80++0x03 hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hgroup.long 0xA84++0x03 hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hgroup.long 0xA88++0x03 hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hgroup.long 0xA8C++0x03 hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hgroup.long 0xA90++0x03 hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hgroup.long 0xA94++0x03 hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hgroup.long 0xA98++0x03 hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hgroup.long 0xA9C++0x03 hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hgroup.long 0xAA0++0x03 hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hgroup.long 0xAA4++0x03 hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hgroup.long 0xAA8++0x03 hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hgroup.long 0xAAC++0x03 hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hgroup.long 0xAB0++0x03 hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hgroup.long 0xAB4++0x03 hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hgroup.long 0xAB8++0x03 hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hgroup.long 0xABC++0x03 hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hgroup.long 0xAC0++0x03 hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hgroup.long 0xAC4++0x03 hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hgroup.long 0xAC8++0x03 hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hgroup.long 0xACC++0x03 hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hgroup.long 0xAD0++0x03 hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hgroup.long 0xAD4++0x03 hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hgroup.long 0xAD8++0x03 hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hgroup.long 0xADC++0x03 hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hgroup.long 0xAE0++0x03 hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hgroup.long 0xAE4++0x03 hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hgroup.long 0xAE8++0x03 hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hgroup.long 0xAEC++0x03 hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hgroup.long 0xAF0++0x03 hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hgroup.long 0xAF4++0x03 hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hgroup.long 0xAF8++0x03 hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hgroup.long 0xAFC++0x03 hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hgroup.long 0xB00++0x03 hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hgroup.long 0xB04++0x03 hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hgroup.long 0xB08++0x03 hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hgroup.long 0xB0C++0x03 hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hgroup.long 0xB10++0x03 hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hgroup.long 0xB14++0x03 hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hgroup.long 0xB18++0x03 hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hgroup.long 0xB1C++0x03 hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hgroup.long 0xB20++0x03 hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hgroup.long 0xB24++0x03 hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hgroup.long 0xB28++0x03 hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hgroup.long 0xB2C++0x03 hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hgroup.long 0xB30++0x03 hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hgroup.long 0xB34++0x03 hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hgroup.long 0xB38++0x03 hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hgroup.long 0xB3C++0x03 hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hgroup.long 0xB40++0x03 hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hgroup.long 0xB44++0x03 hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hgroup.long 0xB48++0x03 hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hgroup.long 0xB4C++0x03 hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hgroup.long 0xB50++0x03 hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hgroup.long 0xB54++0x03 hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hgroup.long 0xB58++0x03 hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hgroup.long 0xB5C++0x03 hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hgroup.long 0xB60++0x03 hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hgroup.long 0xB64++0x03 hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hgroup.long 0xB68++0x03 hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hgroup.long 0xB6C++0x03 hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hgroup.long 0xB70++0x03 hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hgroup.long 0xB74++0x03 hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hgroup.long 0xB78++0x03 hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hgroup.long 0xB7C++0x03 hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hgroup.long 0xB80++0x03 hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hgroup.long 0xB84++0x03 hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hgroup.long 0xB88++0x03 hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hgroup.long 0xB8C++0x03 hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hgroup.long 0xB90++0x03 hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hgroup.long 0xB94++0x03 hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hgroup.long 0xB98++0x03 hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hgroup.long 0xB9C++0x03 hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hgroup.long 0xBA0++0x03 hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hgroup.long 0xBA4++0x03 hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hgroup.long 0xBA8++0x03 hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hgroup.long 0xBAC++0x03 hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hgroup.long 0xBB0++0x03 hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hgroup.long 0xBB4++0x03 hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hgroup.long 0xBB8++0x03 hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hgroup.long 0xBBC++0x03 hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hgroup.long 0xBC0++0x03 hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hgroup.long 0xBC4++0x03 hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hgroup.long 0xBC8++0x03 hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hgroup.long 0xBCC++0x03 hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hgroup.long 0xBD0++0x03 hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hgroup.long 0xBD4++0x03 hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hgroup.long 0xBD8++0x03 hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hgroup.long 0xBDC++0x03 hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" endif tree.end width 14. tree "Configuration Registers" rgroup.long 0xC00++0x03 line.long 0x00 "GICD_ICFGR0,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SGI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SGI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SGI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SGI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SGI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SGI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SGI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SGI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SGI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SGI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SGI)" "Level,Edge" group.long 0xC04++0x03 line.long 0x00 "GICD_ICFGR1,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (PPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (PPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (PPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (PPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (PPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (PPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (PPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (PPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (PPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (PPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (PPI)" "Level,Edge" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1) group.long 0xC08++0x03 line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC0C++0x03 line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC08++0x03 hide.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" hgroup.long 0xC0C++0x03 hide.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x2) group.long 0xC10++0x03 line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC14++0x03 line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC10++0x03 hide.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" hgroup.long 0xC14++0x03 hide.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x3) group.long 0xC18++0x03 line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC1C++0x03 line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC18++0x03 hide.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" hgroup.long 0xC1C++0x03 hide.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x4) group.long 0xC20++0x03 line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC24++0x03 line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC20++0x03 hide.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" hgroup.long 0xC24++0x03 hide.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x5) group.long 0xC28++0x03 line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC2C++0x03 line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC28++0x03 hide.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" hgroup.long 0xC2C++0x03 hide.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x6) group.long 0xC30++0x03 line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC34++0x03 line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC30++0x03 hide.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" hgroup.long 0xC34++0x03 hide.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x7) group.long 0xC38++0x03 line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC3C++0x03 line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC38++0x03 hide.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" hgroup.long 0xC3C++0x03 hide.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x8) group.long 0xC40++0x03 line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC44++0x03 line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC40++0x03 hide.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" hgroup.long 0xC44++0x03 hide.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x9) group.long 0xC48++0x03 line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC4C++0x03 line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC48++0x03 hide.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" hgroup.long 0xC4C++0x03 hide.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xA) group.long 0xC50++0x03 line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC54++0x03 line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC50++0x03 hide.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" hgroup.long 0xC54++0x03 hide.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xB) group.long 0xC58++0x03 line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC5C++0x03 line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC58++0x03 hide.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" hgroup.long 0xC5C++0x03 hide.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xC) group.long 0xC60++0x03 line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC64++0x03 line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC60++0x03 hide.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" hgroup.long 0xC64++0x03 hide.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xD) group.long 0xC68++0x03 line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC6C++0x03 line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC68++0x03 hide.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" hgroup.long 0xC6C++0x03 hide.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xE) group.long 0xC70++0x03 line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC74++0x03 line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC70++0x03 hide.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" hgroup.long 0xC74++0x03 hide.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xF) group.long 0xC78++0x03 line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC7C++0x03 line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC78++0x03 hide.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" hgroup.long 0xC7C++0x03 hide.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) group.long 0xC80++0x03 line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC84++0x03 line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC80++0x03 hide.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" hgroup.long 0xC84++0x03 hide.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) group.long 0xC88++0x03 line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC8C++0x03 line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC88++0x03 hide.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" hgroup.long 0xC8C++0x03 hide.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) group.long 0xC90++0x03 line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC94++0x03 line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC90++0x03 hide.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" hgroup.long 0xC94++0x03 hide.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) group.long 0xC98++0x03 line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xC9C++0x03 line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xC98++0x03 hide.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" hgroup.long 0xC9C++0x03 hide.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) group.long 0xCA0++0x03 line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCA4++0x03 line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCA0++0x03 hide.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" hgroup.long 0xCA4++0x03 hide.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) group.long 0xCA8++0x03 line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCAC++0x03 line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCA8++0x03 hide.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" hgroup.long 0xCAC++0x03 hide.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) group.long 0xCB0++0x03 line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCB4++0x03 line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCB0++0x03 hide.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" hgroup.long 0xCB4++0x03 hide.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) group.long 0xCB8++0x03 line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCBC++0x03 line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCB8++0x03 hide.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" hgroup.long 0xCBC++0x03 hide.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) group.long 0xCC0++0x03 line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCC4++0x03 line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCC0++0x03 hide.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" hgroup.long 0xCC4++0x03 hide.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) group.long 0xCC8++0x03 line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCCC++0x03 line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCC8++0x03 hide.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" hgroup.long 0xCCC++0x03 hide.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) group.long 0xCD0++0x03 line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCD4++0x03 line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCD0++0x03 hide.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" hgroup.long 0xCD4++0x03 hide.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) group.long 0xCD8++0x03 line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCDC++0x03 line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCD8++0x03 hide.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" hgroup.long 0xCDC++0x03 hide.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) group.long 0xCE0++0x03 line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCE4++0x03 line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCE0++0x03 hide.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" hgroup.long 0xCE4++0x03 hide.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) group.long 0xCE8++0x03 line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCEC++0x03 line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCE8++0x03 hide.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" hgroup.long 0xCEC++0x03 hide.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) group.long 0xCF0++0x03 line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" group.long 0xCF4++0x03 line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (SPI)" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0 (SPI)" "Level,Edge" else hgroup.long 0xCF0++0x03 hide.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" hgroup.long 0xCF4++0x03 hide.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" endif tree.end width 17. tree "Interrupt Group Modifier Registers" hgroup.long 0x0D00++0x03 hide.long 0x0 "GICD_IGRPMODR0,Interrupt Group Modifier Register 0" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D00))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)) group.long 0x0D04++0x03 line.long 0x0 "GICD_IGRPMODR1,Interrupt Group Modifier Register 1" bitfld.long 0x00 31. " GMB63 ,Group Modifier Bit 63" "0,1" bitfld.long 0x00 30. " GMB62 ,Group Modifier Bit 62" "0,1" bitfld.long 0x00 29. " GMB61 ,Group Modifier Bit 61" "0,1" textline " " bitfld.long 0x00 28. " GMB60 ,Group Modifier Bit 60" "0,1" bitfld.long 0x00 27. " GMB59 ,Group Modifier Bit 59" "0,1" bitfld.long 0x00 26. " GMB58 ,Group Modifier Bit 58" "0,1" textline " " bitfld.long 0x00 25. " GMB57 ,Group Modifier Bit 57" "0,1" bitfld.long 0x00 24. " GMB56 ,Group Modifier Bit 56" "0,1" bitfld.long 0x00 23. " GMB55 ,Group Modifier Bit 55" "0,1" textline " " bitfld.long 0x00 22. " GMB54 ,Group Modifier Bit 54" "0,1" bitfld.long 0x00 21. " GMB53 ,Group Modifier Bit 53" "0,1" bitfld.long 0x00 20. " GMB52 ,Group Modifier Bit 52" "0,1" textline " " bitfld.long 0x00 19. " GMB51 ,Group Modifier Bit 51" "0,1" bitfld.long 0x00 18. " GMB50 ,Group Modifier Bit 50" "0,1" bitfld.long 0x00 17. " GMB49 ,Group Modifier Bit 49" "0,1" textline " " bitfld.long 0x00 16. " GMB48 ,Group Modifier Bit 48" "0,1" bitfld.long 0x00 15. " GMB47 ,Group Modifier Bit 47" "0,1" bitfld.long 0x00 14. " GMB46 ,Group Modifier Bit 46" "0,1" textline " " bitfld.long 0x00 13. " GMB45 ,Group Modifier Bit 45" "0,1" bitfld.long 0x00 12. " GMB44 ,Group Modifier Bit 44" "0,1" bitfld.long 0x00 11. " GMB43 ,Group Modifier Bit 43" "0,1" textline " " bitfld.long 0x00 10. " GMB42 ,Group Modifier Bit 42" "0,1" bitfld.long 0x00 9. " GMB41 ,Group Modifier Bit 41" "0,1" bitfld.long 0x00 8. " GMB40 ,Group Modifier Bit 40" "0,1" textline " " bitfld.long 0x00 7. " GMB39 ,Group Modifier Bit 39" "0,1" bitfld.long 0x00 6. " GMB38 ,Group Modifier Bit 38" "0,1" bitfld.long 0x00 5. " GMB37 ,Group Modifier Bit 37" "0,1" textline " " bitfld.long 0x00 4. " GMB36 ,Group Modifier Bit 36" "0,1" bitfld.long 0x00 3. " GMB35 ,Group Modifier Bit 35" "0,1" bitfld.long 0x00 2. " GMB34 ,Group Modifier Bit 34" "0,1" textline " " bitfld.long 0x00 1. " GMB33 ,Group Modifier Bit 33" "0,1" bitfld.long 0x00 0. " GMB32 ,Group Modifier Bit 32" "0,1" else hgroup.long 0x0D04++0x03 hide.long 0x0 "GICD_IGRPMODR1,Interrupt Group Modifier Register 1" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D08))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)) group.long 0x0D08++0x03 line.long 0x0 "GICD_IGRPMODR2,Interrupt Group Modifier Register 2" bitfld.long 0x00 31. " GMB95 ,Group Modifier Bit 95" "0,1" bitfld.long 0x00 30. " GMB94 ,Group Modifier Bit 94" "0,1" bitfld.long 0x00 29. " GMB93 ,Group Modifier Bit 93" "0,1" textline " " bitfld.long 0x00 28. " GMB92 ,Group Modifier Bit 92" "0,1" bitfld.long 0x00 27. " GMB91 ,Group Modifier Bit 91" "0,1" bitfld.long 0x00 26. " GMB90 ,Group Modifier Bit 90" "0,1" textline " " bitfld.long 0x00 25. " GMB89 ,Group Modifier Bit 89" "0,1" bitfld.long 0x00 24. " GMB88 ,Group Modifier Bit 88" "0,1" bitfld.long 0x00 23. " GMB87 ,Group Modifier Bit 87" "0,1" textline " " bitfld.long 0x00 22. " GMB86 ,Group Modifier Bit 86" "0,1" bitfld.long 0x00 21. " GMB85 ,Group Modifier Bit 85" "0,1" bitfld.long 0x00 20. " GMB84 ,Group Modifier Bit 84" "0,1" textline " " bitfld.long 0x00 19. " GMB83 ,Group Modifier Bit 83" "0,1" bitfld.long 0x00 18. " GMB82 ,Group Modifier Bit 82" "0,1" bitfld.long 0x00 17. " GMB81 ,Group Modifier Bit 81" "0,1" textline " " bitfld.long 0x00 16. " GMB80 ,Group Modifier Bit 80" "0,1" bitfld.long 0x00 15. " GMB79 ,Group Modifier Bit 79" "0,1" bitfld.long 0x00 14. " GMB78 ,Group Modifier Bit 78" "0,1" textline " " bitfld.long 0x00 13. " GMB77 ,Group Modifier Bit 77" "0,1" bitfld.long 0x00 12. " GMB76 ,Group Modifier Bit 76" "0,1" bitfld.long 0x00 11. " GMB75 ,Group Modifier Bit 75" "0,1" textline " " bitfld.long 0x00 10. " GMB74 ,Group Modifier Bit 74" "0,1" bitfld.long 0x00 9. " GMB73 ,Group Modifier Bit 73" "0,1" bitfld.long 0x00 8. " GMB72 ,Group Modifier Bit 72" "0,1" textline " " bitfld.long 0x00 7. " GMB71 ,Group Modifier Bit 71" "0,1" bitfld.long 0x00 6. " GMB70 ,Group Modifier Bit 70" "0,1" bitfld.long 0x00 5. " GMB69 ,Group Modifier Bit 69" "0,1" textline " " bitfld.long 0x00 4. " GMB68 ,Group Modifier Bit 68" "0,1" bitfld.long 0x00 3. " GMB67 ,Group Modifier Bit 67" "0,1" bitfld.long 0x00 2. " GMB66 ,Group Modifier Bit 66" "0,1" textline " " bitfld.long 0x00 1. " GMB65 ,Group Modifier Bit 65" "0,1" bitfld.long 0x00 0. " GMB64 ,Group Modifier Bit 64" "0,1" else hgroup.long 0x0D08++0x03 hide.long 0x0 "GICD_IGRPMODR2,Interrupt Group Modifier Register 2" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D0C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)) group.long 0x0D0C++0x03 line.long 0x0 "GICD_IGRPMODR3,Interrupt Group Modifier Register 3" bitfld.long 0x00 31. " GMB127 ,Group Modifier Bit 127" "0,1" bitfld.long 0x00 30. " GMB126 ,Group Modifier Bit 126" "0,1" bitfld.long 0x00 29. " GMB125 ,Group Modifier Bit 125" "0,1" textline " " bitfld.long 0x00 28. " GMB124 ,Group Modifier Bit 124" "0,1" bitfld.long 0x00 27. " GMB123 ,Group Modifier Bit 123" "0,1" bitfld.long 0x00 26. " GMB122 ,Group Modifier Bit 122" "0,1" textline " " bitfld.long 0x00 25. " GMB121 ,Group Modifier Bit 121" "0,1" bitfld.long 0x00 24. " GMB120 ,Group Modifier Bit 120" "0,1" bitfld.long 0x00 23. " GMB119 ,Group Modifier Bit 119" "0,1" textline " " bitfld.long 0x00 22. " GMB118 ,Group Modifier Bit 118" "0,1" bitfld.long 0x00 21. " GMB117 ,Group Modifier Bit 117" "0,1" bitfld.long 0x00 20. " GMB116 ,Group Modifier Bit 116" "0,1" textline " " bitfld.long 0x00 19. " GMB115 ,Group Modifier Bit 115" "0,1" bitfld.long 0x00 18. " GMB114 ,Group Modifier Bit 114" "0,1" bitfld.long 0x00 17. " GMB113 ,Group Modifier Bit 113" "0,1" textline " " bitfld.long 0x00 16. " GMB112 ,Group Modifier Bit 112" "0,1" bitfld.long 0x00 15. " GMB111 ,Group Modifier Bit 111" "0,1" bitfld.long 0x00 14. " GMB110 ,Group Modifier Bit 110" "0,1" textline " " bitfld.long 0x00 13. " GMB109 ,Group Modifier Bit 109" "0,1" bitfld.long 0x00 12. " GMB108 ,Group Modifier Bit 108" "0,1" bitfld.long 0x00 11. " GMB107 ,Group Modifier Bit 107" "0,1" textline " " bitfld.long 0x00 10. " GMB106 ,Group Modifier Bit 106" "0,1" bitfld.long 0x00 9. " GMB105 ,Group Modifier Bit 105" "0,1" bitfld.long 0x00 8. " GMB104 ,Group Modifier Bit 104" "0,1" textline " " bitfld.long 0x00 7. " GMB103 ,Group Modifier Bit 103" "0,1" bitfld.long 0x00 6. " GMB102 ,Group Modifier Bit 102" "0,1" bitfld.long 0x00 5. " GMB101 ,Group Modifier Bit 101" "0,1" textline " " bitfld.long 0x00 4. " GMB100 ,Group Modifier Bit 100" "0,1" bitfld.long 0x00 3. " GMB99 ,Group Modifier Bit 99" "0,1" bitfld.long 0x00 2. " GMB98 ,Group Modifier Bit 98" "0,1" textline " " bitfld.long 0x00 1. " GMB97 ,Group Modifier Bit 97" "0,1" bitfld.long 0x00 0. " GMB96 ,Group Modifier Bit 96" "0,1" else hgroup.long 0x0D0C++0x03 hide.long 0x0 "GICD_IGRPMODR3,Interrupt Group Modifier Register 3" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D10))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)) group.long 0x0D10++0x03 line.long 0x0 "GICD_IGRPMODR4,Interrupt Group Modifier Register 4" bitfld.long 0x00 31. " GMB159 ,Group Modifier Bit 159" "0,1" bitfld.long 0x00 30. " GMB158 ,Group Modifier Bit 158" "0,1" bitfld.long 0x00 29. " GMB157 ,Group Modifier Bit 157" "0,1" textline " " bitfld.long 0x00 28. " GMB156 ,Group Modifier Bit 156" "0,1" bitfld.long 0x00 27. " GMB155 ,Group Modifier Bit 155" "0,1" bitfld.long 0x00 26. " GMB154 ,Group Modifier Bit 154" "0,1" textline " " bitfld.long 0x00 25. " GMB153 ,Group Modifier Bit 153" "0,1" bitfld.long 0x00 24. " GMB152 ,Group Modifier Bit 152" "0,1" bitfld.long 0x00 23. " GMB151 ,Group Modifier Bit 151" "0,1" textline " " bitfld.long 0x00 22. " GMB150 ,Group Modifier Bit 150" "0,1" bitfld.long 0x00 21. " GMB149 ,Group Modifier Bit 149" "0,1" bitfld.long 0x00 20. " GMB148 ,Group Modifier Bit 148" "0,1" textline " " bitfld.long 0x00 19. " GMB147 ,Group Modifier Bit 147" "0,1" bitfld.long 0x00 18. " GMB146 ,Group Modifier Bit 146" "0,1" bitfld.long 0x00 17. " GMB145 ,Group Modifier Bit 145" "0,1" textline " " bitfld.long 0x00 16. " GMB144 ,Group Modifier Bit 144" "0,1" bitfld.long 0x00 15. " GMB143 ,Group Modifier Bit 143" "0,1" bitfld.long 0x00 14. " GMB142 ,Group Modifier Bit 142" "0,1" textline " " bitfld.long 0x00 13. " GMB141 ,Group Modifier Bit 141" "0,1" bitfld.long 0x00 12. " GMB140 ,Group Modifier Bit 140" "0,1" bitfld.long 0x00 11. " GMB139 ,Group Modifier Bit 139" "0,1" textline " " bitfld.long 0x00 10. " GMB138 ,Group Modifier Bit 138" "0,1" bitfld.long 0x00 9. " GMB137 ,Group Modifier Bit 137" "0,1" bitfld.long 0x00 8. " GMB136 ,Group Modifier Bit 136" "0,1" textline " " bitfld.long 0x00 7. " GMB135 ,Group Modifier Bit 135" "0,1" bitfld.long 0x00 6. " GMB134 ,Group Modifier Bit 134" "0,1" bitfld.long 0x00 5. " GMB133 ,Group Modifier Bit 133" "0,1" textline " " bitfld.long 0x00 4. " GMB132 ,Group Modifier Bit 132" "0,1" bitfld.long 0x00 3. " GMB131 ,Group Modifier Bit 131" "0,1" bitfld.long 0x00 2. " GMB130 ,Group Modifier Bit 130" "0,1" textline " " bitfld.long 0x00 1. " GMB129 ,Group Modifier Bit 129" "0,1" bitfld.long 0x00 0. " GMB128 ,Group Modifier Bit 128" "0,1" else hgroup.long 0x0D10++0x03 hide.long 0x0 "GICD_IGRPMODR4,Interrupt Group Modifier Register 4" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D14))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)) group.long 0x0D14++0x03 line.long 0x0 "GICD_IGRPMODR5,Interrupt Group Modifier Register 5" bitfld.long 0x00 31. " GMB191 ,Group Modifier Bit 191" "0,1" bitfld.long 0x00 30. " GMB190 ,Group Modifier Bit 190" "0,1" bitfld.long 0x00 29. " GMB189 ,Group Modifier Bit 189" "0,1" textline " " bitfld.long 0x00 28. " GMB188 ,Group Modifier Bit 188" "0,1" bitfld.long 0x00 27. " GMB187 ,Group Modifier Bit 187" "0,1" bitfld.long 0x00 26. " GMB186 ,Group Modifier Bit 186" "0,1" textline " " bitfld.long 0x00 25. " GMB185 ,Group Modifier Bit 185" "0,1" bitfld.long 0x00 24. " GMB184 ,Group Modifier Bit 184" "0,1" bitfld.long 0x00 23. " GMB183 ,Group Modifier Bit 183" "0,1" textline " " bitfld.long 0x00 22. " GMB182 ,Group Modifier Bit 182" "0,1" bitfld.long 0x00 21. " GMB181 ,Group Modifier Bit 181" "0,1" bitfld.long 0x00 20. " GMB180 ,Group Modifier Bit 180" "0,1" textline " " bitfld.long 0x00 19. " GMB179 ,Group Modifier Bit 179" "0,1" bitfld.long 0x00 18. " GMB178 ,Group Modifier Bit 178" "0,1" bitfld.long 0x00 17. " GMB177 ,Group Modifier Bit 177" "0,1" textline " " bitfld.long 0x00 16. " GMB176 ,Group Modifier Bit 176" "0,1" bitfld.long 0x00 15. " GMB175 ,Group Modifier Bit 175" "0,1" bitfld.long 0x00 14. " GMB174 ,Group Modifier Bit 174" "0,1" textline " " bitfld.long 0x00 13. " GMB173 ,Group Modifier Bit 173" "0,1" bitfld.long 0x00 12. " GMB172 ,Group Modifier Bit 172" "0,1" bitfld.long 0x00 11. " GMB171 ,Group Modifier Bit 171" "0,1" textline " " bitfld.long 0x00 10. " GMB170 ,Group Modifier Bit 170" "0,1" bitfld.long 0x00 9. " GMB169 ,Group Modifier Bit 169" "0,1" bitfld.long 0x00 8. " GMB168 ,Group Modifier Bit 168" "0,1" textline " " bitfld.long 0x00 7. " GMB167 ,Group Modifier Bit 167" "0,1" bitfld.long 0x00 6. " GMB166 ,Group Modifier Bit 166" "0,1" bitfld.long 0x00 5. " GMB165 ,Group Modifier Bit 165" "0,1" textline " " bitfld.long 0x00 4. " GMB164 ,Group Modifier Bit 164" "0,1" bitfld.long 0x00 3. " GMB163 ,Group Modifier Bit 163" "0,1" bitfld.long 0x00 2. " GMB162 ,Group Modifier Bit 162" "0,1" textline " " bitfld.long 0x00 1. " GMB161 ,Group Modifier Bit 161" "0,1" bitfld.long 0x00 0. " GMB160 ,Group Modifier Bit 160" "0,1" else hgroup.long 0x0D14++0x03 hide.long 0x0 "GICD_IGRPMODR5,Interrupt Group Modifier Register 5" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D18))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)) group.long 0x0D18++0x03 line.long 0x0 "GICD_IGRPMODR6,Interrupt Group Modifier Register 6" bitfld.long 0x00 31. " GMB223 ,Group Modifier Bit 223" "0,1" bitfld.long 0x00 30. " GMB222 ,Group Modifier Bit 222" "0,1" bitfld.long 0x00 29. " GMB221 ,Group Modifier Bit 221" "0,1" textline " " bitfld.long 0x00 28. " GMB220 ,Group Modifier Bit 220" "0,1" bitfld.long 0x00 27. " GMB219 ,Group Modifier Bit 219" "0,1" bitfld.long 0x00 26. " GMB218 ,Group Modifier Bit 218" "0,1" textline " " bitfld.long 0x00 25. " GMB217 ,Group Modifier Bit 217" "0,1" bitfld.long 0x00 24. " GMB216 ,Group Modifier Bit 216" "0,1" bitfld.long 0x00 23. " GMB215 ,Group Modifier Bit 215" "0,1" textline " " bitfld.long 0x00 22. " GMB214 ,Group Modifier Bit 214" "0,1" bitfld.long 0x00 21. " GMB213 ,Group Modifier Bit 213" "0,1" bitfld.long 0x00 20. " GMB212 ,Group Modifier Bit 212" "0,1" textline " " bitfld.long 0x00 19. " GMB211 ,Group Modifier Bit 211" "0,1" bitfld.long 0x00 18. " GMB210 ,Group Modifier Bit 210" "0,1" bitfld.long 0x00 17. " GMB209 ,Group Modifier Bit 209" "0,1" textline " " bitfld.long 0x00 16. " GMB208 ,Group Modifier Bit 208" "0,1" bitfld.long 0x00 15. " GMB207 ,Group Modifier Bit 207" "0,1" bitfld.long 0x00 14. " GMB206 ,Group Modifier Bit 206" "0,1" textline " " bitfld.long 0x00 13. " GMB205 ,Group Modifier Bit 205" "0,1" bitfld.long 0x00 12. " GMB204 ,Group Modifier Bit 204" "0,1" bitfld.long 0x00 11. " GMB203 ,Group Modifier Bit 203" "0,1" textline " " bitfld.long 0x00 10. " GMB202 ,Group Modifier Bit 202" "0,1" bitfld.long 0x00 9. " GMB201 ,Group Modifier Bit 201" "0,1" bitfld.long 0x00 8. " GMB200 ,Group Modifier Bit 200" "0,1" textline " " bitfld.long 0x00 7. " GMB199 ,Group Modifier Bit 199" "0,1" bitfld.long 0x00 6. " GMB198 ,Group Modifier Bit 198" "0,1" bitfld.long 0x00 5. " GMB197 ,Group Modifier Bit 197" "0,1" textline " " bitfld.long 0x00 4. " GMB196 ,Group Modifier Bit 196" "0,1" bitfld.long 0x00 3. " GMB195 ,Group Modifier Bit 195" "0,1" bitfld.long 0x00 2. " GMB194 ,Group Modifier Bit 194" "0,1" textline " " bitfld.long 0x00 1. " GMB193 ,Group Modifier Bit 193" "0,1" bitfld.long 0x00 0. " GMB192 ,Group Modifier Bit 192" "0,1" else hgroup.long 0x0D18++0x03 hide.long 0x0 "GICD_IGRPMODR6,Interrupt Group Modifier Register 6" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D1C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)) group.long 0x0D1C++0x03 line.long 0x0 "GICD_IGRPMODR7,Interrupt Group Modifier Register 7" bitfld.long 0x00 31. " GMB255 ,Group Modifier Bit 255" "0,1" bitfld.long 0x00 30. " GMB254 ,Group Modifier Bit 254" "0,1" bitfld.long 0x00 29. " GMB253 ,Group Modifier Bit 253" "0,1" textline " " bitfld.long 0x00 28. " GMB252 ,Group Modifier Bit 252" "0,1" bitfld.long 0x00 27. " GMB251 ,Group Modifier Bit 251" "0,1" bitfld.long 0x00 26. " GMB250 ,Group Modifier Bit 250" "0,1" textline " " bitfld.long 0x00 25. " GMB249 ,Group Modifier Bit 249" "0,1" bitfld.long 0x00 24. " GMB248 ,Group Modifier Bit 248" "0,1" bitfld.long 0x00 23. " GMB247 ,Group Modifier Bit 247" "0,1" textline " " bitfld.long 0x00 22. " GMB246 ,Group Modifier Bit 246" "0,1" bitfld.long 0x00 21. " GMB245 ,Group Modifier Bit 245" "0,1" bitfld.long 0x00 20. " GMB244 ,Group Modifier Bit 244" "0,1" textline " " bitfld.long 0x00 19. " GMB243 ,Group Modifier Bit 243" "0,1" bitfld.long 0x00 18. " GMB242 ,Group Modifier Bit 242" "0,1" bitfld.long 0x00 17. " GMB241 ,Group Modifier Bit 241" "0,1" textline " " bitfld.long 0x00 16. " GMB240 ,Group Modifier Bit 240" "0,1" bitfld.long 0x00 15. " GMB239 ,Group Modifier Bit 239" "0,1" bitfld.long 0x00 14. " GMB238 ,Group Modifier Bit 238" "0,1" textline " " bitfld.long 0x00 13. " GMB237 ,Group Modifier Bit 237" "0,1" bitfld.long 0x00 12. " GMB236 ,Group Modifier Bit 236" "0,1" bitfld.long 0x00 11. " GMB235 ,Group Modifier Bit 235" "0,1" textline " " bitfld.long 0x00 10. " GMB234 ,Group Modifier Bit 234" "0,1" bitfld.long 0x00 9. " GMB233 ,Group Modifier Bit 233" "0,1" bitfld.long 0x00 8. " GMB232 ,Group Modifier Bit 232" "0,1" textline " " bitfld.long 0x00 7. " GMB231 ,Group Modifier Bit 231" "0,1" bitfld.long 0x00 6. " GMB230 ,Group Modifier Bit 230" "0,1" bitfld.long 0x00 5. " GMB229 ,Group Modifier Bit 229" "0,1" textline " " bitfld.long 0x00 4. " GMB228 ,Group Modifier Bit 228" "0,1" bitfld.long 0x00 3. " GMB227 ,Group Modifier Bit 227" "0,1" bitfld.long 0x00 2. " GMB226 ,Group Modifier Bit 226" "0,1" textline " " bitfld.long 0x00 1. " GMB225 ,Group Modifier Bit 225" "0,1" bitfld.long 0x00 0. " GMB224 ,Group Modifier Bit 224" "0,1" else hgroup.long 0x0D1C++0x03 hide.long 0x0 "GICD_IGRPMODR7,Interrupt Group Modifier Register 7" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D20))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)) group.long 0x0D20++0x03 line.long 0x0 "GICD_IGRPMODR8,Interrupt Group Modifier Register 8" bitfld.long 0x00 31. " GMB287 ,Group Modifier Bit 287" "0,1" bitfld.long 0x00 30. " GMB286 ,Group Modifier Bit 286" "0,1" bitfld.long 0x00 29. " GMB285 ,Group Modifier Bit 285" "0,1" textline " " bitfld.long 0x00 28. " GMB284 ,Group Modifier Bit 284" "0,1" bitfld.long 0x00 27. " GMB283 ,Group Modifier Bit 283" "0,1" bitfld.long 0x00 26. " GMB282 ,Group Modifier Bit 282" "0,1" textline " " bitfld.long 0x00 25. " GMB281 ,Group Modifier Bit 281" "0,1" bitfld.long 0x00 24. " GMB280 ,Group Modifier Bit 280" "0,1" bitfld.long 0x00 23. " GMB279 ,Group Modifier Bit 279" "0,1" textline " " bitfld.long 0x00 22. " GMB278 ,Group Modifier Bit 278" "0,1" bitfld.long 0x00 21. " GMB277 ,Group Modifier Bit 277" "0,1" bitfld.long 0x00 20. " GMB276 ,Group Modifier Bit 276" "0,1" textline " " bitfld.long 0x00 19. " GMB275 ,Group Modifier Bit 275" "0,1" bitfld.long 0x00 18. " GMB274 ,Group Modifier Bit 274" "0,1" bitfld.long 0x00 17. " GMB273 ,Group Modifier Bit 273" "0,1" textline " " bitfld.long 0x00 16. " GMB272 ,Group Modifier Bit 272" "0,1" bitfld.long 0x00 15. " GMB271 ,Group Modifier Bit 271" "0,1" bitfld.long 0x00 14. " GMB270 ,Group Modifier Bit 270" "0,1" textline " " bitfld.long 0x00 13. " GMB269 ,Group Modifier Bit 269" "0,1" bitfld.long 0x00 12. " GMB268 ,Group Modifier Bit 268" "0,1" bitfld.long 0x00 11. " GMB267 ,Group Modifier Bit 267" "0,1" textline " " bitfld.long 0x00 10. " GMB266 ,Group Modifier Bit 266" "0,1" bitfld.long 0x00 9. " GMB265 ,Group Modifier Bit 265" "0,1" bitfld.long 0x00 8. " GMB264 ,Group Modifier Bit 264" "0,1" textline " " bitfld.long 0x00 7. " GMB263 ,Group Modifier Bit 263" "0,1" bitfld.long 0x00 6. " GMB262 ,Group Modifier Bit 262" "0,1" bitfld.long 0x00 5. " GMB261 ,Group Modifier Bit 261" "0,1" textline " " bitfld.long 0x00 4. " GMB260 ,Group Modifier Bit 260" "0,1" bitfld.long 0x00 3. " GMB259 ,Group Modifier Bit 259" "0,1" bitfld.long 0x00 2. " GMB258 ,Group Modifier Bit 258" "0,1" textline " " bitfld.long 0x00 1. " GMB257 ,Group Modifier Bit 257" "0,1" bitfld.long 0x00 0. " GMB256 ,Group Modifier Bit 256" "0,1" else hgroup.long 0x0D20++0x03 hide.long 0x0 "GICD_IGRPMODR8,Interrupt Group Modifier Register 8" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D24))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)) group.long 0x0D24++0x03 line.long 0x0 "GICD_IGRPMODR9,Interrupt Group Modifier Register 9" bitfld.long 0x00 31. " GMB319 ,Group Modifier Bit 319" "0,1" bitfld.long 0x00 30. " GMB318 ,Group Modifier Bit 318" "0,1" bitfld.long 0x00 29. " GMB317 ,Group Modifier Bit 317" "0,1" textline " " bitfld.long 0x00 28. " GMB316 ,Group Modifier Bit 316" "0,1" bitfld.long 0x00 27. " GMB315 ,Group Modifier Bit 315" "0,1" bitfld.long 0x00 26. " GMB314 ,Group Modifier Bit 314" "0,1" textline " " bitfld.long 0x00 25. " GMB313 ,Group Modifier Bit 313" "0,1" bitfld.long 0x00 24. " GMB312 ,Group Modifier Bit 312" "0,1" bitfld.long 0x00 23. " GMB311 ,Group Modifier Bit 311" "0,1" textline " " bitfld.long 0x00 22. " GMB310 ,Group Modifier Bit 310" "0,1" bitfld.long 0x00 21. " GMB309 ,Group Modifier Bit 309" "0,1" bitfld.long 0x00 20. " GMB308 ,Group Modifier Bit 308" "0,1" textline " " bitfld.long 0x00 19. " GMB307 ,Group Modifier Bit 307" "0,1" bitfld.long 0x00 18. " GMB306 ,Group Modifier Bit 306" "0,1" bitfld.long 0x00 17. " GMB305 ,Group Modifier Bit 305" "0,1" textline " " bitfld.long 0x00 16. " GMB304 ,Group Modifier Bit 304" "0,1" bitfld.long 0x00 15. " GMB303 ,Group Modifier Bit 303" "0,1" bitfld.long 0x00 14. " GMB302 ,Group Modifier Bit 302" "0,1" textline " " bitfld.long 0x00 13. " GMB301 ,Group Modifier Bit 301" "0,1" bitfld.long 0x00 12. " GMB300 ,Group Modifier Bit 300" "0,1" bitfld.long 0x00 11. " GMB299 ,Group Modifier Bit 299" "0,1" textline " " bitfld.long 0x00 10. " GMB298 ,Group Modifier Bit 298" "0,1" bitfld.long 0x00 9. " GMB297 ,Group Modifier Bit 297" "0,1" bitfld.long 0x00 8. " GMB296 ,Group Modifier Bit 296" "0,1" textline " " bitfld.long 0x00 7. " GMB295 ,Group Modifier Bit 295" "0,1" bitfld.long 0x00 6. " GMB294 ,Group Modifier Bit 294" "0,1" bitfld.long 0x00 5. " GMB293 ,Group Modifier Bit 293" "0,1" textline " " bitfld.long 0x00 4. " GMB292 ,Group Modifier Bit 292" "0,1" bitfld.long 0x00 3. " GMB291 ,Group Modifier Bit 291" "0,1" bitfld.long 0x00 2. " GMB290 ,Group Modifier Bit 290" "0,1" textline " " bitfld.long 0x00 1. " GMB289 ,Group Modifier Bit 289" "0,1" bitfld.long 0x00 0. " GMB288 ,Group Modifier Bit 288" "0,1" else hgroup.long 0x0D24++0x03 hide.long 0x0 "GICD_IGRPMODR9,Interrupt Group Modifier Register 9" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D28))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)) group.long 0x0D28++0x03 line.long 0x0 "GICD_IGRPMODR10,Interrupt Group Modifier Register 10" bitfld.long 0x00 31. " GMB351 ,Group Modifier Bit 351" "0,1" bitfld.long 0x00 30. " GMB350 ,Group Modifier Bit 350" "0,1" bitfld.long 0x00 29. " GMB349 ,Group Modifier Bit 349" "0,1" textline " " bitfld.long 0x00 28. " GMB348 ,Group Modifier Bit 348" "0,1" bitfld.long 0x00 27. " GMB347 ,Group Modifier Bit 347" "0,1" bitfld.long 0x00 26. " GMB346 ,Group Modifier Bit 346" "0,1" textline " " bitfld.long 0x00 25. " GMB345 ,Group Modifier Bit 345" "0,1" bitfld.long 0x00 24. " GMB344 ,Group Modifier Bit 344" "0,1" bitfld.long 0x00 23. " GMB343 ,Group Modifier Bit 343" "0,1" textline " " bitfld.long 0x00 22. " GMB342 ,Group Modifier Bit 342" "0,1" bitfld.long 0x00 21. " GMB341 ,Group Modifier Bit 341" "0,1" bitfld.long 0x00 20. " GMB340 ,Group Modifier Bit 340" "0,1" textline " " bitfld.long 0x00 19. " GMB339 ,Group Modifier Bit 339" "0,1" bitfld.long 0x00 18. " GMB338 ,Group Modifier Bit 338" "0,1" bitfld.long 0x00 17. " GMB337 ,Group Modifier Bit 337" "0,1" textline " " bitfld.long 0x00 16. " GMB336 ,Group Modifier Bit 336" "0,1" bitfld.long 0x00 15. " GMB335 ,Group Modifier Bit 335" "0,1" bitfld.long 0x00 14. " GMB334 ,Group Modifier Bit 334" "0,1" textline " " bitfld.long 0x00 13. " GMB333 ,Group Modifier Bit 333" "0,1" bitfld.long 0x00 12. " GMB332 ,Group Modifier Bit 332" "0,1" bitfld.long 0x00 11. " GMB331 ,Group Modifier Bit 331" "0,1" textline " " bitfld.long 0x00 10. " GMB330 ,Group Modifier Bit 330" "0,1" bitfld.long 0x00 9. " GMB329 ,Group Modifier Bit 329" "0,1" bitfld.long 0x00 8. " GMB328 ,Group Modifier Bit 328" "0,1" textline " " bitfld.long 0x00 7. " GMB327 ,Group Modifier Bit 327" "0,1" bitfld.long 0x00 6. " GMB326 ,Group Modifier Bit 326" "0,1" bitfld.long 0x00 5. " GMB325 ,Group Modifier Bit 325" "0,1" textline " " bitfld.long 0x00 4. " GMB324 ,Group Modifier Bit 324" "0,1" bitfld.long 0x00 3. " GMB323 ,Group Modifier Bit 323" "0,1" bitfld.long 0x00 2. " GMB322 ,Group Modifier Bit 322" "0,1" textline " " bitfld.long 0x00 1. " GMB321 ,Group Modifier Bit 321" "0,1" bitfld.long 0x00 0. " GMB320 ,Group Modifier Bit 320" "0,1" else hgroup.long 0x0D28++0x03 hide.long 0x0 "GICD_IGRPMODR10,Interrupt Group Modifier Register 10" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D2C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)) group.long 0x0D2C++0x03 line.long 0x0 "GICD_IGRPMODR11,Interrupt Group Modifier Register 11" bitfld.long 0x00 31. " GMB383 ,Group Modifier Bit 383" "0,1" bitfld.long 0x00 30. " GMB382 ,Group Modifier Bit 382" "0,1" bitfld.long 0x00 29. " GMB381 ,Group Modifier Bit 381" "0,1" textline " " bitfld.long 0x00 28. " GMB380 ,Group Modifier Bit 380" "0,1" bitfld.long 0x00 27. " GMB379 ,Group Modifier Bit 379" "0,1" bitfld.long 0x00 26. " GMB378 ,Group Modifier Bit 378" "0,1" textline " " bitfld.long 0x00 25. " GMB377 ,Group Modifier Bit 377" "0,1" bitfld.long 0x00 24. " GMB376 ,Group Modifier Bit 376" "0,1" bitfld.long 0x00 23. " GMB375 ,Group Modifier Bit 375" "0,1" textline " " bitfld.long 0x00 22. " GMB374 ,Group Modifier Bit 374" "0,1" bitfld.long 0x00 21. " GMB373 ,Group Modifier Bit 373" "0,1" bitfld.long 0x00 20. " GMB372 ,Group Modifier Bit 372" "0,1" textline " " bitfld.long 0x00 19. " GMB371 ,Group Modifier Bit 371" "0,1" bitfld.long 0x00 18. " GMB370 ,Group Modifier Bit 370" "0,1" bitfld.long 0x00 17. " GMB369 ,Group Modifier Bit 369" "0,1" textline " " bitfld.long 0x00 16. " GMB368 ,Group Modifier Bit 368" "0,1" bitfld.long 0x00 15. " GMB367 ,Group Modifier Bit 367" "0,1" bitfld.long 0x00 14. " GMB366 ,Group Modifier Bit 366" "0,1" textline " " bitfld.long 0x00 13. " GMB365 ,Group Modifier Bit 365" "0,1" bitfld.long 0x00 12. " GMB364 ,Group Modifier Bit 364" "0,1" bitfld.long 0x00 11. " GMB363 ,Group Modifier Bit 363" "0,1" textline " " bitfld.long 0x00 10. " GMB362 ,Group Modifier Bit 362" "0,1" bitfld.long 0x00 9. " GMB361 ,Group Modifier Bit 361" "0,1" bitfld.long 0x00 8. " GMB360 ,Group Modifier Bit 360" "0,1" textline " " bitfld.long 0x00 7. " GMB359 ,Group Modifier Bit 359" "0,1" bitfld.long 0x00 6. " GMB358 ,Group Modifier Bit 358" "0,1" bitfld.long 0x00 5. " GMB357 ,Group Modifier Bit 357" "0,1" textline " " bitfld.long 0x00 4. " GMB356 ,Group Modifier Bit 356" "0,1" bitfld.long 0x00 3. " GMB355 ,Group Modifier Bit 355" "0,1" bitfld.long 0x00 2. " GMB354 ,Group Modifier Bit 354" "0,1" textline " " bitfld.long 0x00 1. " GMB353 ,Group Modifier Bit 353" "0,1" bitfld.long 0x00 0. " GMB352 ,Group Modifier Bit 352" "0,1" else hgroup.long 0x0D2C++0x03 hide.long 0x0 "GICD_IGRPMODR11,Interrupt Group Modifier Register 11" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D30))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)) group.long 0x0D30++0x03 line.long 0x0 "GICD_IGRPMODR12,Interrupt Group Modifier Register 12" bitfld.long 0x00 31. " GMB415 ,Group Modifier Bit 415" "0,1" bitfld.long 0x00 30. " GMB414 ,Group Modifier Bit 414" "0,1" bitfld.long 0x00 29. " GMB413 ,Group Modifier Bit 413" "0,1" textline " " bitfld.long 0x00 28. " GMB412 ,Group Modifier Bit 412" "0,1" bitfld.long 0x00 27. " GMB411 ,Group Modifier Bit 411" "0,1" bitfld.long 0x00 26. " GMB410 ,Group Modifier Bit 410" "0,1" textline " " bitfld.long 0x00 25. " GMB409 ,Group Modifier Bit 409" "0,1" bitfld.long 0x00 24. " GMB408 ,Group Modifier Bit 408" "0,1" bitfld.long 0x00 23. " GMB407 ,Group Modifier Bit 407" "0,1" textline " " bitfld.long 0x00 22. " GMB406 ,Group Modifier Bit 406" "0,1" bitfld.long 0x00 21. " GMB405 ,Group Modifier Bit 405" "0,1" bitfld.long 0x00 20. " GMB404 ,Group Modifier Bit 404" "0,1" textline " " bitfld.long 0x00 19. " GMB403 ,Group Modifier Bit 403" "0,1" bitfld.long 0x00 18. " GMB402 ,Group Modifier Bit 402" "0,1" bitfld.long 0x00 17. " GMB401 ,Group Modifier Bit 401" "0,1" textline " " bitfld.long 0x00 16. " GMB400 ,Group Modifier Bit 400" "0,1" bitfld.long 0x00 15. " GMB399 ,Group Modifier Bit 399" "0,1" bitfld.long 0x00 14. " GMB398 ,Group Modifier Bit 398" "0,1" textline " " bitfld.long 0x00 13. " GMB397 ,Group Modifier Bit 397" "0,1" bitfld.long 0x00 12. " GMB396 ,Group Modifier Bit 396" "0,1" bitfld.long 0x00 11. " GMB395 ,Group Modifier Bit 395" "0,1" textline " " bitfld.long 0x00 10. " GMB394 ,Group Modifier Bit 394" "0,1" bitfld.long 0x00 9. " GMB393 ,Group Modifier Bit 393" "0,1" bitfld.long 0x00 8. " GMB392 ,Group Modifier Bit 392" "0,1" textline " " bitfld.long 0x00 7. " GMB391 ,Group Modifier Bit 391" "0,1" bitfld.long 0x00 6. " GMB390 ,Group Modifier Bit 390" "0,1" bitfld.long 0x00 5. " GMB389 ,Group Modifier Bit 389" "0,1" textline " " bitfld.long 0x00 4. " GMB388 ,Group Modifier Bit 388" "0,1" bitfld.long 0x00 3. " GMB387 ,Group Modifier Bit 387" "0,1" bitfld.long 0x00 2. " GMB386 ,Group Modifier Bit 386" "0,1" textline " " bitfld.long 0x00 1. " GMB385 ,Group Modifier Bit 385" "0,1" bitfld.long 0x00 0. " GMB384 ,Group Modifier Bit 384" "0,1" else hgroup.long 0x0D30++0x03 hide.long 0x0 "GICD_IGRPMODR12,Interrupt Group Modifier Register 12" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D34))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)) group.long 0x0D34++0x03 line.long 0x0 "GICD_IGRPMODR13,Interrupt Group Modifier Register 13" bitfld.long 0x00 31. " GMB447 ,Group Modifier Bit 447" "0,1" bitfld.long 0x00 30. " GMB446 ,Group Modifier Bit 446" "0,1" bitfld.long 0x00 29. " GMB445 ,Group Modifier Bit 445" "0,1" textline " " bitfld.long 0x00 28. " GMB444 ,Group Modifier Bit 444" "0,1" bitfld.long 0x00 27. " GMB443 ,Group Modifier Bit 443" "0,1" bitfld.long 0x00 26. " GMB442 ,Group Modifier Bit 442" "0,1" textline " " bitfld.long 0x00 25. " GMB441 ,Group Modifier Bit 441" "0,1" bitfld.long 0x00 24. " GMB440 ,Group Modifier Bit 440" "0,1" bitfld.long 0x00 23. " GMB439 ,Group Modifier Bit 439" "0,1" textline " " bitfld.long 0x00 22. " GMB438 ,Group Modifier Bit 438" "0,1" bitfld.long 0x00 21. " GMB437 ,Group Modifier Bit 437" "0,1" bitfld.long 0x00 20. " GMB436 ,Group Modifier Bit 436" "0,1" textline " " bitfld.long 0x00 19. " GMB435 ,Group Modifier Bit 435" "0,1" bitfld.long 0x00 18. " GMB434 ,Group Modifier Bit 434" "0,1" bitfld.long 0x00 17. " GMB433 ,Group Modifier Bit 433" "0,1" textline " " bitfld.long 0x00 16. " GMB432 ,Group Modifier Bit 432" "0,1" bitfld.long 0x00 15. " GMB431 ,Group Modifier Bit 431" "0,1" bitfld.long 0x00 14. " GMB430 ,Group Modifier Bit 430" "0,1" textline " " bitfld.long 0x00 13. " GMB429 ,Group Modifier Bit 429" "0,1" bitfld.long 0x00 12. " GMB428 ,Group Modifier Bit 428" "0,1" bitfld.long 0x00 11. " GMB427 ,Group Modifier Bit 427" "0,1" textline " " bitfld.long 0x00 10. " GMB426 ,Group Modifier Bit 426" "0,1" bitfld.long 0x00 9. " GMB425 ,Group Modifier Bit 425" "0,1" bitfld.long 0x00 8. " GMB424 ,Group Modifier Bit 424" "0,1" textline " " bitfld.long 0x00 7. " GMB423 ,Group Modifier Bit 423" "0,1" bitfld.long 0x00 6. " GMB422 ,Group Modifier Bit 422" "0,1" bitfld.long 0x00 5. " GMB421 ,Group Modifier Bit 421" "0,1" textline " " bitfld.long 0x00 4. " GMB420 ,Group Modifier Bit 420" "0,1" bitfld.long 0x00 3. " GMB419 ,Group Modifier Bit 419" "0,1" bitfld.long 0x00 2. " GMB418 ,Group Modifier Bit 418" "0,1" textline " " bitfld.long 0x00 1. " GMB417 ,Group Modifier Bit 417" "0,1" bitfld.long 0x00 0. " GMB416 ,Group Modifier Bit 416" "0,1" else hgroup.long 0x0D34++0x03 hide.long 0x0 "GICD_IGRPMODR13,Interrupt Group Modifier Register 13" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D38))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)) group.long 0x0D38++0x03 line.long 0x0 "GICD_IGRPMODR14,Interrupt Group Modifier Register 14" bitfld.long 0x00 31. " GMB479 ,Group Modifier Bit 479" "0,1" bitfld.long 0x00 30. " GMB478 ,Group Modifier Bit 478" "0,1" bitfld.long 0x00 29. " GMB477 ,Group Modifier Bit 477" "0,1" textline " " bitfld.long 0x00 28. " GMB476 ,Group Modifier Bit 476" "0,1" bitfld.long 0x00 27. " GMB475 ,Group Modifier Bit 475" "0,1" bitfld.long 0x00 26. " GMB474 ,Group Modifier Bit 474" "0,1" textline " " bitfld.long 0x00 25. " GMB473 ,Group Modifier Bit 473" "0,1" bitfld.long 0x00 24. " GMB472 ,Group Modifier Bit 472" "0,1" bitfld.long 0x00 23. " GMB471 ,Group Modifier Bit 471" "0,1" textline " " bitfld.long 0x00 22. " GMB470 ,Group Modifier Bit 470" "0,1" bitfld.long 0x00 21. " GMB469 ,Group Modifier Bit 469" "0,1" bitfld.long 0x00 20. " GMB468 ,Group Modifier Bit 468" "0,1" textline " " bitfld.long 0x00 19. " GMB467 ,Group Modifier Bit 467" "0,1" bitfld.long 0x00 18. " GMB466 ,Group Modifier Bit 466" "0,1" bitfld.long 0x00 17. " GMB465 ,Group Modifier Bit 465" "0,1" textline " " bitfld.long 0x00 16. " GMB464 ,Group Modifier Bit 464" "0,1" bitfld.long 0x00 15. " GMB463 ,Group Modifier Bit 463" "0,1" bitfld.long 0x00 14. " GMB462 ,Group Modifier Bit 462" "0,1" textline " " bitfld.long 0x00 13. " GMB461 ,Group Modifier Bit 461" "0,1" bitfld.long 0x00 12. " GMB460 ,Group Modifier Bit 460" "0,1" bitfld.long 0x00 11. " GMB459 ,Group Modifier Bit 459" "0,1" textline " " bitfld.long 0x00 10. " GMB458 ,Group Modifier Bit 458" "0,1" bitfld.long 0x00 9. " GMB457 ,Group Modifier Bit 457" "0,1" bitfld.long 0x00 8. " GMB456 ,Group Modifier Bit 456" "0,1" textline " " bitfld.long 0x00 7. " GMB455 ,Group Modifier Bit 455" "0,1" bitfld.long 0x00 6. " GMB454 ,Group Modifier Bit 454" "0,1" bitfld.long 0x00 5. " GMB453 ,Group Modifier Bit 453" "0,1" textline " " bitfld.long 0x00 4. " GMB452 ,Group Modifier Bit 452" "0,1" bitfld.long 0x00 3. " GMB451 ,Group Modifier Bit 451" "0,1" bitfld.long 0x00 2. " GMB450 ,Group Modifier Bit 450" "0,1" textline " " bitfld.long 0x00 1. " GMB449 ,Group Modifier Bit 449" "0,1" bitfld.long 0x00 0. " GMB448 ,Group Modifier Bit 448" "0,1" else hgroup.long 0x0D38++0x03 hide.long 0x0 "GICD_IGRPMODR14,Interrupt Group Modifier Register 14" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D3C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)) group.long 0x0D3C++0x03 line.long 0x0 "GICD_IGRPMODR15,Interrupt Group Modifier Register 15" bitfld.long 0x00 31. " GMB511 ,Group Modifier Bit 511" "0,1" bitfld.long 0x00 30. " GMB510 ,Group Modifier Bit 510" "0,1" bitfld.long 0x00 29. " GMB509 ,Group Modifier Bit 509" "0,1" textline " " bitfld.long 0x00 28. " GMB508 ,Group Modifier Bit 508" "0,1" bitfld.long 0x00 27. " GMB507 ,Group Modifier Bit 507" "0,1" bitfld.long 0x00 26. " GMB506 ,Group Modifier Bit 506" "0,1" textline " " bitfld.long 0x00 25. " GMB505 ,Group Modifier Bit 505" "0,1" bitfld.long 0x00 24. " GMB504 ,Group Modifier Bit 504" "0,1" bitfld.long 0x00 23. " GMB503 ,Group Modifier Bit 503" "0,1" textline " " bitfld.long 0x00 22. " GMB502 ,Group Modifier Bit 502" "0,1" bitfld.long 0x00 21. " GMB501 ,Group Modifier Bit 501" "0,1" bitfld.long 0x00 20. " GMB500 ,Group Modifier Bit 500" "0,1" textline " " bitfld.long 0x00 19. " GMB499 ,Group Modifier Bit 499" "0,1" bitfld.long 0x00 18. " GMB498 ,Group Modifier Bit 498" "0,1" bitfld.long 0x00 17. " GMB497 ,Group Modifier Bit 497" "0,1" textline " " bitfld.long 0x00 16. " GMB496 ,Group Modifier Bit 496" "0,1" bitfld.long 0x00 15. " GMB495 ,Group Modifier Bit 495" "0,1" bitfld.long 0x00 14. " GMB494 ,Group Modifier Bit 494" "0,1" textline " " bitfld.long 0x00 13. " GMB493 ,Group Modifier Bit 493" "0,1" bitfld.long 0x00 12. " GMB492 ,Group Modifier Bit 492" "0,1" bitfld.long 0x00 11. " GMB491 ,Group Modifier Bit 491" "0,1" textline " " bitfld.long 0x00 10. " GMB490 ,Group Modifier Bit 490" "0,1" bitfld.long 0x00 9. " GMB489 ,Group Modifier Bit 489" "0,1" bitfld.long 0x00 8. " GMB488 ,Group Modifier Bit 488" "0,1" textline " " bitfld.long 0x00 7. " GMB487 ,Group Modifier Bit 487" "0,1" bitfld.long 0x00 6. " GMB486 ,Group Modifier Bit 486" "0,1" bitfld.long 0x00 5. " GMB485 ,Group Modifier Bit 485" "0,1" textline " " bitfld.long 0x00 4. " GMB484 ,Group Modifier Bit 484" "0,1" bitfld.long 0x00 3. " GMB483 ,Group Modifier Bit 483" "0,1" bitfld.long 0x00 2. " GMB482 ,Group Modifier Bit 482" "0,1" textline " " bitfld.long 0x00 1. " GMB481 ,Group Modifier Bit 481" "0,1" bitfld.long 0x00 0. " GMB480 ,Group Modifier Bit 480" "0,1" else hgroup.long 0x0D3C++0x03 hide.long 0x0 "GICD_IGRPMODR15,Interrupt Group Modifier Register 15" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D40))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)) group.long 0x0D40++0x03 line.long 0x0 "GICD_IGRPMODR16,Interrupt Group Modifier Register 16" bitfld.long 0x00 31. " GMB543 ,Group Modifier Bit 543" "0,1" bitfld.long 0x00 30. " GMB542 ,Group Modifier Bit 542" "0,1" bitfld.long 0x00 29. " GMB541 ,Group Modifier Bit 541" "0,1" textline " " bitfld.long 0x00 28. " GMB540 ,Group Modifier Bit 540" "0,1" bitfld.long 0x00 27. " GMB539 ,Group Modifier Bit 539" "0,1" bitfld.long 0x00 26. " GMB538 ,Group Modifier Bit 538" "0,1" textline " " bitfld.long 0x00 25. " GMB537 ,Group Modifier Bit 537" "0,1" bitfld.long 0x00 24. " GMB536 ,Group Modifier Bit 536" "0,1" bitfld.long 0x00 23. " GMB535 ,Group Modifier Bit 535" "0,1" textline " " bitfld.long 0x00 22. " GMB534 ,Group Modifier Bit 534" "0,1" bitfld.long 0x00 21. " GMB533 ,Group Modifier Bit 533" "0,1" bitfld.long 0x00 20. " GMB532 ,Group Modifier Bit 532" "0,1" textline " " bitfld.long 0x00 19. " GMB531 ,Group Modifier Bit 531" "0,1" bitfld.long 0x00 18. " GMB530 ,Group Modifier Bit 530" "0,1" bitfld.long 0x00 17. " GMB529 ,Group Modifier Bit 529" "0,1" textline " " bitfld.long 0x00 16. " GMB528 ,Group Modifier Bit 528" "0,1" bitfld.long 0x00 15. " GMB527 ,Group Modifier Bit 527" "0,1" bitfld.long 0x00 14. " GMB526 ,Group Modifier Bit 526" "0,1" textline " " bitfld.long 0x00 13. " GMB525 ,Group Modifier Bit 525" "0,1" bitfld.long 0x00 12. " GMB524 ,Group Modifier Bit 524" "0,1" bitfld.long 0x00 11. " GMB523 ,Group Modifier Bit 523" "0,1" textline " " bitfld.long 0x00 10. " GMB522 ,Group Modifier Bit 522" "0,1" bitfld.long 0x00 9. " GMB521 ,Group Modifier Bit 521" "0,1" bitfld.long 0x00 8. " GMB520 ,Group Modifier Bit 520" "0,1" textline " " bitfld.long 0x00 7. " GMB519 ,Group Modifier Bit 519" "0,1" bitfld.long 0x00 6. " GMB518 ,Group Modifier Bit 518" "0,1" bitfld.long 0x00 5. " GMB517 ,Group Modifier Bit 517" "0,1" textline " " bitfld.long 0x00 4. " GMB516 ,Group Modifier Bit 516" "0,1" bitfld.long 0x00 3. " GMB515 ,Group Modifier Bit 515" "0,1" bitfld.long 0x00 2. " GMB514 ,Group Modifier Bit 514" "0,1" textline " " bitfld.long 0x00 1. " GMB513 ,Group Modifier Bit 513" "0,1" bitfld.long 0x00 0. " GMB512 ,Group Modifier Bit 512" "0,1" else hgroup.long 0x0D40++0x03 hide.long 0x0 "GICD_IGRPMODR16,Interrupt Group Modifier Register 16" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D44))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)) group.long 0x0D44++0x03 line.long 0x0 "GICD_IGRPMODR17,Interrupt Group Modifier Register 17" bitfld.long 0x00 31. " GMB575 ,Group Modifier Bit 575" "0,1" bitfld.long 0x00 30. " GMB574 ,Group Modifier Bit 574" "0,1" bitfld.long 0x00 29. " GMB573 ,Group Modifier Bit 573" "0,1" textline " " bitfld.long 0x00 28. " GMB572 ,Group Modifier Bit 572" "0,1" bitfld.long 0x00 27. " GMB571 ,Group Modifier Bit 571" "0,1" bitfld.long 0x00 26. " GMB570 ,Group Modifier Bit 570" "0,1" textline " " bitfld.long 0x00 25. " GMB569 ,Group Modifier Bit 569" "0,1" bitfld.long 0x00 24. " GMB568 ,Group Modifier Bit 568" "0,1" bitfld.long 0x00 23. " GMB567 ,Group Modifier Bit 567" "0,1" textline " " bitfld.long 0x00 22. " GMB566 ,Group Modifier Bit 566" "0,1" bitfld.long 0x00 21. " GMB565 ,Group Modifier Bit 565" "0,1" bitfld.long 0x00 20. " GMB564 ,Group Modifier Bit 564" "0,1" textline " " bitfld.long 0x00 19. " GMB563 ,Group Modifier Bit 563" "0,1" bitfld.long 0x00 18. " GMB562 ,Group Modifier Bit 562" "0,1" bitfld.long 0x00 17. " GMB561 ,Group Modifier Bit 561" "0,1" textline " " bitfld.long 0x00 16. " GMB560 ,Group Modifier Bit 560" "0,1" bitfld.long 0x00 15. " GMB559 ,Group Modifier Bit 559" "0,1" bitfld.long 0x00 14. " GMB558 ,Group Modifier Bit 558" "0,1" textline " " bitfld.long 0x00 13. " GMB557 ,Group Modifier Bit 557" "0,1" bitfld.long 0x00 12. " GMB556 ,Group Modifier Bit 556" "0,1" bitfld.long 0x00 11. " GMB555 ,Group Modifier Bit 555" "0,1" textline " " bitfld.long 0x00 10. " GMB554 ,Group Modifier Bit 554" "0,1" bitfld.long 0x00 9. " GMB553 ,Group Modifier Bit 553" "0,1" bitfld.long 0x00 8. " GMB552 ,Group Modifier Bit 552" "0,1" textline " " bitfld.long 0x00 7. " GMB551 ,Group Modifier Bit 551" "0,1" bitfld.long 0x00 6. " GMB550 ,Group Modifier Bit 550" "0,1" bitfld.long 0x00 5. " GMB549 ,Group Modifier Bit 549" "0,1" textline " " bitfld.long 0x00 4. " GMB548 ,Group Modifier Bit 548" "0,1" bitfld.long 0x00 3. " GMB547 ,Group Modifier Bit 547" "0,1" bitfld.long 0x00 2. " GMB546 ,Group Modifier Bit 546" "0,1" textline " " bitfld.long 0x00 1. " GMB545 ,Group Modifier Bit 545" "0,1" bitfld.long 0x00 0. " GMB544 ,Group Modifier Bit 544" "0,1" else hgroup.long 0x0D44++0x03 hide.long 0x0 "GICD_IGRPMODR17,Interrupt Group Modifier Register 17" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D48))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)) group.long 0x0D48++0x03 line.long 0x0 "GICD_IGRPMODR18,Interrupt Group Modifier Register 18" bitfld.long 0x00 31. " GMB607 ,Group Modifier Bit 607" "0,1" bitfld.long 0x00 30. " GMB606 ,Group Modifier Bit 606" "0,1" bitfld.long 0x00 29. " GMB605 ,Group Modifier Bit 605" "0,1" textline " " bitfld.long 0x00 28. " GMB604 ,Group Modifier Bit 604" "0,1" bitfld.long 0x00 27. " GMB603 ,Group Modifier Bit 603" "0,1" bitfld.long 0x00 26. " GMB602 ,Group Modifier Bit 602" "0,1" textline " " bitfld.long 0x00 25. " GMB601 ,Group Modifier Bit 601" "0,1" bitfld.long 0x00 24. " GMB600 ,Group Modifier Bit 600" "0,1" bitfld.long 0x00 23. " GMB599 ,Group Modifier Bit 599" "0,1" textline " " bitfld.long 0x00 22. " GMB598 ,Group Modifier Bit 598" "0,1" bitfld.long 0x00 21. " GMB597 ,Group Modifier Bit 597" "0,1" bitfld.long 0x00 20. " GMB596 ,Group Modifier Bit 596" "0,1" textline " " bitfld.long 0x00 19. " GMB595 ,Group Modifier Bit 595" "0,1" bitfld.long 0x00 18. " GMB594 ,Group Modifier Bit 594" "0,1" bitfld.long 0x00 17. " GMB593 ,Group Modifier Bit 593" "0,1" textline " " bitfld.long 0x00 16. " GMB592 ,Group Modifier Bit 592" "0,1" bitfld.long 0x00 15. " GMB591 ,Group Modifier Bit 591" "0,1" bitfld.long 0x00 14. " GMB590 ,Group Modifier Bit 590" "0,1" textline " " bitfld.long 0x00 13. " GMB589 ,Group Modifier Bit 589" "0,1" bitfld.long 0x00 12. " GMB588 ,Group Modifier Bit 588" "0,1" bitfld.long 0x00 11. " GMB587 ,Group Modifier Bit 587" "0,1" textline " " bitfld.long 0x00 10. " GMB586 ,Group Modifier Bit 586" "0,1" bitfld.long 0x00 9. " GMB585 ,Group Modifier Bit 585" "0,1" bitfld.long 0x00 8. " GMB584 ,Group Modifier Bit 584" "0,1" textline " " bitfld.long 0x00 7. " GMB583 ,Group Modifier Bit 583" "0,1" bitfld.long 0x00 6. " GMB582 ,Group Modifier Bit 582" "0,1" bitfld.long 0x00 5. " GMB581 ,Group Modifier Bit 581" "0,1" textline " " bitfld.long 0x00 4. " GMB580 ,Group Modifier Bit 580" "0,1" bitfld.long 0x00 3. " GMB579 ,Group Modifier Bit 579" "0,1" bitfld.long 0x00 2. " GMB578 ,Group Modifier Bit 578" "0,1" textline " " bitfld.long 0x00 1. " GMB577 ,Group Modifier Bit 577" "0,1" bitfld.long 0x00 0. " GMB576 ,Group Modifier Bit 576" "0,1" else hgroup.long 0x0D48++0x03 hide.long 0x0 "GICD_IGRPMODR18,Interrupt Group Modifier Register 18" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D4C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)) group.long 0x0D4C++0x03 line.long 0x0 "GICD_IGRPMODR19,Interrupt Group Modifier Register 19" bitfld.long 0x00 31. " GMB639 ,Group Modifier Bit 639" "0,1" bitfld.long 0x00 30. " GMB638 ,Group Modifier Bit 638" "0,1" bitfld.long 0x00 29. " GMB637 ,Group Modifier Bit 637" "0,1" textline " " bitfld.long 0x00 28. " GMB636 ,Group Modifier Bit 636" "0,1" bitfld.long 0x00 27. " GMB635 ,Group Modifier Bit 635" "0,1" bitfld.long 0x00 26. " GMB634 ,Group Modifier Bit 634" "0,1" textline " " bitfld.long 0x00 25. " GMB633 ,Group Modifier Bit 633" "0,1" bitfld.long 0x00 24. " GMB632 ,Group Modifier Bit 632" "0,1" bitfld.long 0x00 23. " GMB631 ,Group Modifier Bit 631" "0,1" textline " " bitfld.long 0x00 22. " GMB630 ,Group Modifier Bit 630" "0,1" bitfld.long 0x00 21. " GMB629 ,Group Modifier Bit 629" "0,1" bitfld.long 0x00 20. " GMB628 ,Group Modifier Bit 628" "0,1" textline " " bitfld.long 0x00 19. " GMB627 ,Group Modifier Bit 627" "0,1" bitfld.long 0x00 18. " GMB626 ,Group Modifier Bit 626" "0,1" bitfld.long 0x00 17. " GMB625 ,Group Modifier Bit 625" "0,1" textline " " bitfld.long 0x00 16. " GMB624 ,Group Modifier Bit 624" "0,1" bitfld.long 0x00 15. " GMB623 ,Group Modifier Bit 623" "0,1" bitfld.long 0x00 14. " GMB622 ,Group Modifier Bit 622" "0,1" textline " " bitfld.long 0x00 13. " GMB621 ,Group Modifier Bit 621" "0,1" bitfld.long 0x00 12. " GMB620 ,Group Modifier Bit 620" "0,1" bitfld.long 0x00 11. " GMB619 ,Group Modifier Bit 619" "0,1" textline " " bitfld.long 0x00 10. " GMB618 ,Group Modifier Bit 618" "0,1" bitfld.long 0x00 9. " GMB617 ,Group Modifier Bit 617" "0,1" bitfld.long 0x00 8. " GMB616 ,Group Modifier Bit 616" "0,1" textline " " bitfld.long 0x00 7. " GMB615 ,Group Modifier Bit 615" "0,1" bitfld.long 0x00 6. " GMB614 ,Group Modifier Bit 614" "0,1" bitfld.long 0x00 5. " GMB613 ,Group Modifier Bit 613" "0,1" textline " " bitfld.long 0x00 4. " GMB612 ,Group Modifier Bit 612" "0,1" bitfld.long 0x00 3. " GMB611 ,Group Modifier Bit 611" "0,1" bitfld.long 0x00 2. " GMB610 ,Group Modifier Bit 610" "0,1" textline " " bitfld.long 0x00 1. " GMB609 ,Group Modifier Bit 609" "0,1" bitfld.long 0x00 0. " GMB608 ,Group Modifier Bit 608" "0,1" else hgroup.long 0x0D4C++0x03 hide.long 0x0 "GICD_IGRPMODR19,Interrupt Group Modifier Register 19" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D50))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)) group.long 0x0D50++0x03 line.long 0x0 "GICD_IGRPMODR20,Interrupt Group Modifier Register 20" bitfld.long 0x00 31. " GMB671 ,Group Modifier Bit 671" "0,1" bitfld.long 0x00 30. " GMB670 ,Group Modifier Bit 670" "0,1" bitfld.long 0x00 29. " GMB669 ,Group Modifier Bit 669" "0,1" textline " " bitfld.long 0x00 28. " GMB668 ,Group Modifier Bit 668" "0,1" bitfld.long 0x00 27. " GMB667 ,Group Modifier Bit 667" "0,1" bitfld.long 0x00 26. " GMB666 ,Group Modifier Bit 666" "0,1" textline " " bitfld.long 0x00 25. " GMB665 ,Group Modifier Bit 665" "0,1" bitfld.long 0x00 24. " GMB664 ,Group Modifier Bit 664" "0,1" bitfld.long 0x00 23. " GMB663 ,Group Modifier Bit 663" "0,1" textline " " bitfld.long 0x00 22. " GMB662 ,Group Modifier Bit 662" "0,1" bitfld.long 0x00 21. " GMB661 ,Group Modifier Bit 661" "0,1" bitfld.long 0x00 20. " GMB660 ,Group Modifier Bit 660" "0,1" textline " " bitfld.long 0x00 19. " GMB659 ,Group Modifier Bit 659" "0,1" bitfld.long 0x00 18. " GMB658 ,Group Modifier Bit 658" "0,1" bitfld.long 0x00 17. " GMB657 ,Group Modifier Bit 657" "0,1" textline " " bitfld.long 0x00 16. " GMB656 ,Group Modifier Bit 656" "0,1" bitfld.long 0x00 15. " GMB655 ,Group Modifier Bit 655" "0,1" bitfld.long 0x00 14. " GMB654 ,Group Modifier Bit 654" "0,1" textline " " bitfld.long 0x00 13. " GMB653 ,Group Modifier Bit 653" "0,1" bitfld.long 0x00 12. " GMB652 ,Group Modifier Bit 652" "0,1" bitfld.long 0x00 11. " GMB651 ,Group Modifier Bit 651" "0,1" textline " " bitfld.long 0x00 10. " GMB650 ,Group Modifier Bit 650" "0,1" bitfld.long 0x00 9. " GMB649 ,Group Modifier Bit 649" "0,1" bitfld.long 0x00 8. " GMB648 ,Group Modifier Bit 648" "0,1" textline " " bitfld.long 0x00 7. " GMB647 ,Group Modifier Bit 647" "0,1" bitfld.long 0x00 6. " GMB646 ,Group Modifier Bit 646" "0,1" bitfld.long 0x00 5. " GMB645 ,Group Modifier Bit 645" "0,1" textline " " bitfld.long 0x00 4. " GMB644 ,Group Modifier Bit 644" "0,1" bitfld.long 0x00 3. " GMB643 ,Group Modifier Bit 643" "0,1" bitfld.long 0x00 2. " GMB642 ,Group Modifier Bit 642" "0,1" textline " " bitfld.long 0x00 1. " GMB641 ,Group Modifier Bit 641" "0,1" bitfld.long 0x00 0. " GMB640 ,Group Modifier Bit 640" "0,1" else hgroup.long 0x0D50++0x03 hide.long 0x0 "GICD_IGRPMODR20,Interrupt Group Modifier Register 20" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D54))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)) group.long 0x0D54++0x03 line.long 0x0 "GICD_IGRPMODR21,Interrupt Group Modifier Register 21" bitfld.long 0x00 31. " GMB703 ,Group Modifier Bit 703" "0,1" bitfld.long 0x00 30. " GMB702 ,Group Modifier Bit 702" "0,1" bitfld.long 0x00 29. " GMB701 ,Group Modifier Bit 701" "0,1" textline " " bitfld.long 0x00 28. " GMB700 ,Group Modifier Bit 700" "0,1" bitfld.long 0x00 27. " GMB699 ,Group Modifier Bit 699" "0,1" bitfld.long 0x00 26. " GMB698 ,Group Modifier Bit 698" "0,1" textline " " bitfld.long 0x00 25. " GMB697 ,Group Modifier Bit 697" "0,1" bitfld.long 0x00 24. " GMB696 ,Group Modifier Bit 696" "0,1" bitfld.long 0x00 23. " GMB695 ,Group Modifier Bit 695" "0,1" textline " " bitfld.long 0x00 22. " GMB694 ,Group Modifier Bit 694" "0,1" bitfld.long 0x00 21. " GMB693 ,Group Modifier Bit 693" "0,1" bitfld.long 0x00 20. " GMB692 ,Group Modifier Bit 692" "0,1" textline " " bitfld.long 0x00 19. " GMB691 ,Group Modifier Bit 691" "0,1" bitfld.long 0x00 18. " GMB690 ,Group Modifier Bit 690" "0,1" bitfld.long 0x00 17. " GMB689 ,Group Modifier Bit 689" "0,1" textline " " bitfld.long 0x00 16. " GMB688 ,Group Modifier Bit 688" "0,1" bitfld.long 0x00 15. " GMB687 ,Group Modifier Bit 687" "0,1" bitfld.long 0x00 14. " GMB686 ,Group Modifier Bit 686" "0,1" textline " " bitfld.long 0x00 13. " GMB685 ,Group Modifier Bit 685" "0,1" bitfld.long 0x00 12. " GMB684 ,Group Modifier Bit 684" "0,1" bitfld.long 0x00 11. " GMB683 ,Group Modifier Bit 683" "0,1" textline " " bitfld.long 0x00 10. " GMB682 ,Group Modifier Bit 682" "0,1" bitfld.long 0x00 9. " GMB681 ,Group Modifier Bit 681" "0,1" bitfld.long 0x00 8. " GMB680 ,Group Modifier Bit 680" "0,1" textline " " bitfld.long 0x00 7. " GMB679 ,Group Modifier Bit 679" "0,1" bitfld.long 0x00 6. " GMB678 ,Group Modifier Bit 678" "0,1" bitfld.long 0x00 5. " GMB677 ,Group Modifier Bit 677" "0,1" textline " " bitfld.long 0x00 4. " GMB676 ,Group Modifier Bit 676" "0,1" bitfld.long 0x00 3. " GMB675 ,Group Modifier Bit 675" "0,1" bitfld.long 0x00 2. " GMB674 ,Group Modifier Bit 674" "0,1" textline " " bitfld.long 0x00 1. " GMB673 ,Group Modifier Bit 673" "0,1" bitfld.long 0x00 0. " GMB672 ,Group Modifier Bit 672" "0,1" else hgroup.long 0x0D54++0x03 hide.long 0x0 "GICD_IGRPMODR21,Interrupt Group Modifier Register 21" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D58))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)) group.long 0x0D58++0x03 line.long 0x0 "GICD_IGRPMODR22,Interrupt Group Modifier Register 22" bitfld.long 0x00 31. " GMB735 ,Group Modifier Bit 735" "0,1" bitfld.long 0x00 30. " GMB734 ,Group Modifier Bit 734" "0,1" bitfld.long 0x00 29. " GMB733 ,Group Modifier Bit 733" "0,1" textline " " bitfld.long 0x00 28. " GMB732 ,Group Modifier Bit 732" "0,1" bitfld.long 0x00 27. " GMB731 ,Group Modifier Bit 731" "0,1" bitfld.long 0x00 26. " GMB730 ,Group Modifier Bit 730" "0,1" textline " " bitfld.long 0x00 25. " GMB729 ,Group Modifier Bit 729" "0,1" bitfld.long 0x00 24. " GMB728 ,Group Modifier Bit 728" "0,1" bitfld.long 0x00 23. " GMB727 ,Group Modifier Bit 727" "0,1" textline " " bitfld.long 0x00 22. " GMB726 ,Group Modifier Bit 726" "0,1" bitfld.long 0x00 21. " GMB725 ,Group Modifier Bit 725" "0,1" bitfld.long 0x00 20. " GMB724 ,Group Modifier Bit 724" "0,1" textline " " bitfld.long 0x00 19. " GMB723 ,Group Modifier Bit 723" "0,1" bitfld.long 0x00 18. " GMB722 ,Group Modifier Bit 722" "0,1" bitfld.long 0x00 17. " GMB721 ,Group Modifier Bit 721" "0,1" textline " " bitfld.long 0x00 16. " GMB720 ,Group Modifier Bit 720" "0,1" bitfld.long 0x00 15. " GMB719 ,Group Modifier Bit 719" "0,1" bitfld.long 0x00 14. " GMB718 ,Group Modifier Bit 718" "0,1" textline " " bitfld.long 0x00 13. " GMB717 ,Group Modifier Bit 717" "0,1" bitfld.long 0x00 12. " GMB716 ,Group Modifier Bit 716" "0,1" bitfld.long 0x00 11. " GMB715 ,Group Modifier Bit 715" "0,1" textline " " bitfld.long 0x00 10. " GMB714 ,Group Modifier Bit 714" "0,1" bitfld.long 0x00 9. " GMB713 ,Group Modifier Bit 713" "0,1" bitfld.long 0x00 8. " GMB712 ,Group Modifier Bit 712" "0,1" textline " " bitfld.long 0x00 7. " GMB711 ,Group Modifier Bit 711" "0,1" bitfld.long 0x00 6. " GMB710 ,Group Modifier Bit 710" "0,1" bitfld.long 0x00 5. " GMB709 ,Group Modifier Bit 709" "0,1" textline " " bitfld.long 0x00 4. " GMB708 ,Group Modifier Bit 708" "0,1" bitfld.long 0x00 3. " GMB707 ,Group Modifier Bit 707" "0,1" bitfld.long 0x00 2. " GMB706 ,Group Modifier Bit 706" "0,1" textline " " bitfld.long 0x00 1. " GMB705 ,Group Modifier Bit 705" "0,1" bitfld.long 0x00 0. " GMB704 ,Group Modifier Bit 704" "0,1" else hgroup.long 0x0D58++0x03 hide.long 0x0 "GICD_IGRPMODR22,Interrupt Group Modifier Register 22" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D5C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)) group.long 0x0D5C++0x03 line.long 0x0 "GICD_IGRPMODR23,Interrupt Group Modifier Register 23" bitfld.long 0x00 31. " GMB767 ,Group Modifier Bit 767" "0,1" bitfld.long 0x00 30. " GMB766 ,Group Modifier Bit 766" "0,1" bitfld.long 0x00 29. " GMB765 ,Group Modifier Bit 765" "0,1" textline " " bitfld.long 0x00 28. " GMB764 ,Group Modifier Bit 764" "0,1" bitfld.long 0x00 27. " GMB763 ,Group Modifier Bit 763" "0,1" bitfld.long 0x00 26. " GMB762 ,Group Modifier Bit 762" "0,1" textline " " bitfld.long 0x00 25. " GMB761 ,Group Modifier Bit 761" "0,1" bitfld.long 0x00 24. " GMB760 ,Group Modifier Bit 760" "0,1" bitfld.long 0x00 23. " GMB759 ,Group Modifier Bit 759" "0,1" textline " " bitfld.long 0x00 22. " GMB758 ,Group Modifier Bit 758" "0,1" bitfld.long 0x00 21. " GMB757 ,Group Modifier Bit 757" "0,1" bitfld.long 0x00 20. " GMB756 ,Group Modifier Bit 756" "0,1" textline " " bitfld.long 0x00 19. " GMB755 ,Group Modifier Bit 755" "0,1" bitfld.long 0x00 18. " GMB754 ,Group Modifier Bit 754" "0,1" bitfld.long 0x00 17. " GMB753 ,Group Modifier Bit 753" "0,1" textline " " bitfld.long 0x00 16. " GMB752 ,Group Modifier Bit 752" "0,1" bitfld.long 0x00 15. " GMB751 ,Group Modifier Bit 751" "0,1" bitfld.long 0x00 14. " GMB750 ,Group Modifier Bit 750" "0,1" textline " " bitfld.long 0x00 13. " GMB749 ,Group Modifier Bit 749" "0,1" bitfld.long 0x00 12. " GMB748 ,Group Modifier Bit 748" "0,1" bitfld.long 0x00 11. " GMB747 ,Group Modifier Bit 747" "0,1" textline " " bitfld.long 0x00 10. " GMB746 ,Group Modifier Bit 746" "0,1" bitfld.long 0x00 9. " GMB745 ,Group Modifier Bit 745" "0,1" bitfld.long 0x00 8. " GMB744 ,Group Modifier Bit 744" "0,1" textline " " bitfld.long 0x00 7. " GMB743 ,Group Modifier Bit 743" "0,1" bitfld.long 0x00 6. " GMB742 ,Group Modifier Bit 742" "0,1" bitfld.long 0x00 5. " GMB741 ,Group Modifier Bit 741" "0,1" textline " " bitfld.long 0x00 4. " GMB740 ,Group Modifier Bit 740" "0,1" bitfld.long 0x00 3. " GMB739 ,Group Modifier Bit 739" "0,1" bitfld.long 0x00 2. " GMB738 ,Group Modifier Bit 738" "0,1" textline " " bitfld.long 0x00 1. " GMB737 ,Group Modifier Bit 737" "0,1" bitfld.long 0x00 0. " GMB736 ,Group Modifier Bit 736" "0,1" else hgroup.long 0x0D5C++0x03 hide.long 0x0 "GICD_IGRPMODR23,Interrupt Group Modifier Register 23" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D60))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)) group.long 0x0D60++0x03 line.long 0x0 "GICD_IGRPMODR24,Interrupt Group Modifier Register 24" bitfld.long 0x00 31. " GMB799 ,Group Modifier Bit 799" "0,1" bitfld.long 0x00 30. " GMB798 ,Group Modifier Bit 798" "0,1" bitfld.long 0x00 29. " GMB797 ,Group Modifier Bit 797" "0,1" textline " " bitfld.long 0x00 28. " GMB796 ,Group Modifier Bit 796" "0,1" bitfld.long 0x00 27. " GMB795 ,Group Modifier Bit 795" "0,1" bitfld.long 0x00 26. " GMB794 ,Group Modifier Bit 794" "0,1" textline " " bitfld.long 0x00 25. " GMB793 ,Group Modifier Bit 793" "0,1" bitfld.long 0x00 24. " GMB792 ,Group Modifier Bit 792" "0,1" bitfld.long 0x00 23. " GMB791 ,Group Modifier Bit 791" "0,1" textline " " bitfld.long 0x00 22. " GMB790 ,Group Modifier Bit 790" "0,1" bitfld.long 0x00 21. " GMB789 ,Group Modifier Bit 789" "0,1" bitfld.long 0x00 20. " GMB788 ,Group Modifier Bit 788" "0,1" textline " " bitfld.long 0x00 19. " GMB787 ,Group Modifier Bit 787" "0,1" bitfld.long 0x00 18. " GMB786 ,Group Modifier Bit 786" "0,1" bitfld.long 0x00 17. " GMB785 ,Group Modifier Bit 785" "0,1" textline " " bitfld.long 0x00 16. " GMB784 ,Group Modifier Bit 784" "0,1" bitfld.long 0x00 15. " GMB783 ,Group Modifier Bit 783" "0,1" bitfld.long 0x00 14. " GMB782 ,Group Modifier Bit 782" "0,1" textline " " bitfld.long 0x00 13. " GMB781 ,Group Modifier Bit 781" "0,1" bitfld.long 0x00 12. " GMB780 ,Group Modifier Bit 780" "0,1" bitfld.long 0x00 11. " GMB779 ,Group Modifier Bit 779" "0,1" textline " " bitfld.long 0x00 10. " GMB778 ,Group Modifier Bit 778" "0,1" bitfld.long 0x00 9. " GMB777 ,Group Modifier Bit 777" "0,1" bitfld.long 0x00 8. " GMB776 ,Group Modifier Bit 776" "0,1" textline " " bitfld.long 0x00 7. " GMB775 ,Group Modifier Bit 775" "0,1" bitfld.long 0x00 6. " GMB774 ,Group Modifier Bit 774" "0,1" bitfld.long 0x00 5. " GMB773 ,Group Modifier Bit 773" "0,1" textline " " bitfld.long 0x00 4. " GMB772 ,Group Modifier Bit 772" "0,1" bitfld.long 0x00 3. " GMB771 ,Group Modifier Bit 771" "0,1" bitfld.long 0x00 2. " GMB770 ,Group Modifier Bit 770" "0,1" textline " " bitfld.long 0x00 1. " GMB769 ,Group Modifier Bit 769" "0,1" bitfld.long 0x00 0. " GMB768 ,Group Modifier Bit 768" "0,1" else hgroup.long 0x0D60++0x03 hide.long 0x0 "GICD_IGRPMODR24,Interrupt Group Modifier Register 24" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D64))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)) group.long 0x0D64++0x03 line.long 0x0 "GICD_IGRPMODR25,Interrupt Group Modifier Register 25" bitfld.long 0x00 31. " GMB831 ,Group Modifier Bit 831" "0,1" bitfld.long 0x00 30. " GMB830 ,Group Modifier Bit 830" "0,1" bitfld.long 0x00 29. " GMB829 ,Group Modifier Bit 829" "0,1" textline " " bitfld.long 0x00 28. " GMB828 ,Group Modifier Bit 828" "0,1" bitfld.long 0x00 27. " GMB827 ,Group Modifier Bit 827" "0,1" bitfld.long 0x00 26. " GMB826 ,Group Modifier Bit 826" "0,1" textline " " bitfld.long 0x00 25. " GMB825 ,Group Modifier Bit 825" "0,1" bitfld.long 0x00 24. " GMB824 ,Group Modifier Bit 824" "0,1" bitfld.long 0x00 23. " GMB823 ,Group Modifier Bit 823" "0,1" textline " " bitfld.long 0x00 22. " GMB822 ,Group Modifier Bit 822" "0,1" bitfld.long 0x00 21. " GMB821 ,Group Modifier Bit 821" "0,1" bitfld.long 0x00 20. " GMB820 ,Group Modifier Bit 820" "0,1" textline " " bitfld.long 0x00 19. " GMB819 ,Group Modifier Bit 819" "0,1" bitfld.long 0x00 18. " GMB818 ,Group Modifier Bit 818" "0,1" bitfld.long 0x00 17. " GMB817 ,Group Modifier Bit 817" "0,1" textline " " bitfld.long 0x00 16. " GMB816 ,Group Modifier Bit 816" "0,1" bitfld.long 0x00 15. " GMB815 ,Group Modifier Bit 815" "0,1" bitfld.long 0x00 14. " GMB814 ,Group Modifier Bit 814" "0,1" textline " " bitfld.long 0x00 13. " GMB813 ,Group Modifier Bit 813" "0,1" bitfld.long 0x00 12. " GMB812 ,Group Modifier Bit 812" "0,1" bitfld.long 0x00 11. " GMB811 ,Group Modifier Bit 811" "0,1" textline " " bitfld.long 0x00 10. " GMB810 ,Group Modifier Bit 810" "0,1" bitfld.long 0x00 9. " GMB809 ,Group Modifier Bit 809" "0,1" bitfld.long 0x00 8. " GMB808 ,Group Modifier Bit 808" "0,1" textline " " bitfld.long 0x00 7. " GMB807 ,Group Modifier Bit 807" "0,1" bitfld.long 0x00 6. " GMB806 ,Group Modifier Bit 806" "0,1" bitfld.long 0x00 5. " GMB805 ,Group Modifier Bit 805" "0,1" textline " " bitfld.long 0x00 4. " GMB804 ,Group Modifier Bit 804" "0,1" bitfld.long 0x00 3. " GMB803 ,Group Modifier Bit 803" "0,1" bitfld.long 0x00 2. " GMB802 ,Group Modifier Bit 802" "0,1" textline " " bitfld.long 0x00 1. " GMB801 ,Group Modifier Bit 801" "0,1" bitfld.long 0x00 0. " GMB800 ,Group Modifier Bit 800" "0,1" else hgroup.long 0x0D64++0x03 hide.long 0x0 "GICD_IGRPMODR25,Interrupt Group Modifier Register 25" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D68))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01A)) group.long 0x0D68++0x03 line.long 0x0 "GICD_IGRPMODR26,Interrupt Group Modifier Register 26" bitfld.long 0x00 31. " GMB863 ,Group Modifier Bit 863" "0,1" bitfld.long 0x00 30. " GMB862 ,Group Modifier Bit 862" "0,1" bitfld.long 0x00 29. " GMB861 ,Group Modifier Bit 861" "0,1" textline " " bitfld.long 0x00 28. " GMB860 ,Group Modifier Bit 860" "0,1" bitfld.long 0x00 27. " GMB859 ,Group Modifier Bit 859" "0,1" bitfld.long 0x00 26. " GMB858 ,Group Modifier Bit 858" "0,1" textline " " bitfld.long 0x00 25. " GMB857 ,Group Modifier Bit 857" "0,1" bitfld.long 0x00 24. " GMB856 ,Group Modifier Bit 856" "0,1" bitfld.long 0x00 23. " GMB855 ,Group Modifier Bit 855" "0,1" textline " " bitfld.long 0x00 22. " GMB854 ,Group Modifier Bit 854" "0,1" bitfld.long 0x00 21. " GMB853 ,Group Modifier Bit 853" "0,1" bitfld.long 0x00 20. " GMB852 ,Group Modifier Bit 852" "0,1" textline " " bitfld.long 0x00 19. " GMB851 ,Group Modifier Bit 851" "0,1" bitfld.long 0x00 18. " GMB850 ,Group Modifier Bit 850" "0,1" bitfld.long 0x00 17. " GMB849 ,Group Modifier Bit 849" "0,1" textline " " bitfld.long 0x00 16. " GMB848 ,Group Modifier Bit 848" "0,1" bitfld.long 0x00 15. " GMB847 ,Group Modifier Bit 847" "0,1" bitfld.long 0x00 14. " GMB846 ,Group Modifier Bit 846" "0,1" textline " " bitfld.long 0x00 13. " GMB845 ,Group Modifier Bit 845" "0,1" bitfld.long 0x00 12. " GMB844 ,Group Modifier Bit 844" "0,1" bitfld.long 0x00 11. " GMB843 ,Group Modifier Bit 843" "0,1" textline " " bitfld.long 0x00 10. " GMB842 ,Group Modifier Bit 842" "0,1" bitfld.long 0x00 9. " GMB841 ,Group Modifier Bit 841" "0,1" bitfld.long 0x00 8. " GMB840 ,Group Modifier Bit 840" "0,1" textline " " bitfld.long 0x00 7. " GMB839 ,Group Modifier Bit 839" "0,1" bitfld.long 0x00 6. " GMB838 ,Group Modifier Bit 838" "0,1" bitfld.long 0x00 5. " GMB837 ,Group Modifier Bit 837" "0,1" textline " " bitfld.long 0x00 4. " GMB836 ,Group Modifier Bit 836" "0,1" bitfld.long 0x00 3. " GMB835 ,Group Modifier Bit 835" "0,1" bitfld.long 0x00 2. " GMB834 ,Group Modifier Bit 834" "0,1" textline " " bitfld.long 0x00 1. " GMB833 ,Group Modifier Bit 833" "0,1" bitfld.long 0x00 0. " GMB832 ,Group Modifier Bit 832" "0,1" else hgroup.long 0x0D68++0x03 hide.long 0x0 "GICD_IGRPMODR26,Interrupt Group Modifier Register 26" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D6C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)) group.long 0x0D6C++0x03 line.long 0x0 "GICD_IGRPMODR27,Interrupt Group Modifier Register 27" bitfld.long 0x00 31. " GMB895 ,Group Modifier Bit 895" "0,1" bitfld.long 0x00 30. " GMB894 ,Group Modifier Bit 894" "0,1" bitfld.long 0x00 29. " GMB893 ,Group Modifier Bit 893" "0,1" textline " " bitfld.long 0x00 28. " GMB892 ,Group Modifier Bit 892" "0,1" bitfld.long 0x00 27. " GMB891 ,Group Modifier Bit 891" "0,1" bitfld.long 0x00 26. " GMB890 ,Group Modifier Bit 890" "0,1" textline " " bitfld.long 0x00 25. " GMB889 ,Group Modifier Bit 889" "0,1" bitfld.long 0x00 24. " GMB888 ,Group Modifier Bit 888" "0,1" bitfld.long 0x00 23. " GMB887 ,Group Modifier Bit 887" "0,1" textline " " bitfld.long 0x00 22. " GMB886 ,Group Modifier Bit 886" "0,1" bitfld.long 0x00 21. " GMB885 ,Group Modifier Bit 885" "0,1" bitfld.long 0x00 20. " GMB884 ,Group Modifier Bit 884" "0,1" textline " " bitfld.long 0x00 19. " GMB883 ,Group Modifier Bit 883" "0,1" bitfld.long 0x00 18. " GMB882 ,Group Modifier Bit 882" "0,1" bitfld.long 0x00 17. " GMB881 ,Group Modifier Bit 881" "0,1" textline " " bitfld.long 0x00 16. " GMB880 ,Group Modifier Bit 880" "0,1" bitfld.long 0x00 15. " GMB879 ,Group Modifier Bit 879" "0,1" bitfld.long 0x00 14. " GMB878 ,Group Modifier Bit 878" "0,1" textline " " bitfld.long 0x00 13. " GMB877 ,Group Modifier Bit 877" "0,1" bitfld.long 0x00 12. " GMB876 ,Group Modifier Bit 876" "0,1" bitfld.long 0x00 11. " GMB875 ,Group Modifier Bit 875" "0,1" textline " " bitfld.long 0x00 10. " GMB874 ,Group Modifier Bit 874" "0,1" bitfld.long 0x00 9. " GMB873 ,Group Modifier Bit 873" "0,1" bitfld.long 0x00 8. " GMB872 ,Group Modifier Bit 872" "0,1" textline " " bitfld.long 0x00 7. " GMB871 ,Group Modifier Bit 871" "0,1" bitfld.long 0x00 6. " GMB870 ,Group Modifier Bit 870" "0,1" bitfld.long 0x00 5. " GMB869 ,Group Modifier Bit 869" "0,1" textline " " bitfld.long 0x00 4. " GMB868 ,Group Modifier Bit 868" "0,1" bitfld.long 0x00 3. " GMB867 ,Group Modifier Bit 867" "0,1" bitfld.long 0x00 2. " GMB866 ,Group Modifier Bit 866" "0,1" textline " " bitfld.long 0x00 1. " GMB865 ,Group Modifier Bit 865" "0,1" bitfld.long 0x00 0. " GMB864 ,Group Modifier Bit 864" "0,1" else hgroup.long 0x0D6C++0x03 hide.long 0x0 "GICD_IGRPMODR27,Interrupt Group Modifier Register 27" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D70))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)) group.long 0x0D70++0x03 line.long 0x0 "GICD_IGRPMODR28,Interrupt Group Modifier Register 28" bitfld.long 0x00 31. " GMB927 ,Group Modifier Bit 927" "0,1" bitfld.long 0x00 30. " GMB926 ,Group Modifier Bit 926" "0,1" bitfld.long 0x00 29. " GMB925 ,Group Modifier Bit 925" "0,1" textline " " bitfld.long 0x00 28. " GMB924 ,Group Modifier Bit 924" "0,1" bitfld.long 0x00 27. " GMB923 ,Group Modifier Bit 923" "0,1" bitfld.long 0x00 26. " GMB922 ,Group Modifier Bit 922" "0,1" textline " " bitfld.long 0x00 25. " GMB921 ,Group Modifier Bit 921" "0,1" bitfld.long 0x00 24. " GMB920 ,Group Modifier Bit 920" "0,1" bitfld.long 0x00 23. " GMB919 ,Group Modifier Bit 919" "0,1" textline " " bitfld.long 0x00 22. " GMB918 ,Group Modifier Bit 918" "0,1" bitfld.long 0x00 21. " GMB917 ,Group Modifier Bit 917" "0,1" bitfld.long 0x00 20. " GMB916 ,Group Modifier Bit 916" "0,1" textline " " bitfld.long 0x00 19. " GMB915 ,Group Modifier Bit 915" "0,1" bitfld.long 0x00 18. " GMB914 ,Group Modifier Bit 914" "0,1" bitfld.long 0x00 17. " GMB913 ,Group Modifier Bit 913" "0,1" textline " " bitfld.long 0x00 16. " GMB912 ,Group Modifier Bit 912" "0,1" bitfld.long 0x00 15. " GMB911 ,Group Modifier Bit 911" "0,1" bitfld.long 0x00 14. " GMB910 ,Group Modifier Bit 910" "0,1" textline " " bitfld.long 0x00 13. " GMB909 ,Group Modifier Bit 909" "0,1" bitfld.long 0x00 12. " GMB908 ,Group Modifier Bit 908" "0,1" bitfld.long 0x00 11. " GMB907 ,Group Modifier Bit 907" "0,1" textline " " bitfld.long 0x00 10. " GMB906 ,Group Modifier Bit 906" "0,1" bitfld.long 0x00 9. " GMB905 ,Group Modifier Bit 905" "0,1" bitfld.long 0x00 8. " GMB904 ,Group Modifier Bit 904" "0,1" textline " " bitfld.long 0x00 7. " GMB903 ,Group Modifier Bit 903" "0,1" bitfld.long 0x00 6. " GMB902 ,Group Modifier Bit 902" "0,1" bitfld.long 0x00 5. " GMB901 ,Group Modifier Bit 901" "0,1" textline " " bitfld.long 0x00 4. " GMB900 ,Group Modifier Bit 900" "0,1" bitfld.long 0x00 3. " GMB899 ,Group Modifier Bit 899" "0,1" bitfld.long 0x00 2. " GMB898 ,Group Modifier Bit 898" "0,1" textline " " bitfld.long 0x00 1. " GMB897 ,Group Modifier Bit 897" "0,1" bitfld.long 0x00 0. " GMB896 ,Group Modifier Bit 896" "0,1" else hgroup.long 0x0D70++0x03 hide.long 0x0 "GICD_IGRPMODR28,Interrupt Group Modifier Register 28" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D74))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)) group.long 0x0D74++0x03 line.long 0x0 "GICD_IGRPMODR29,Interrupt Group Modifier Register 29" bitfld.long 0x00 31. " GMB959 ,Group Modifier Bit 959" "0,1" bitfld.long 0x00 30. " GMB958 ,Group Modifier Bit 958" "0,1" bitfld.long 0x00 29. " GMB957 ,Group Modifier Bit 957" "0,1" textline " " bitfld.long 0x00 28. " GMB956 ,Group Modifier Bit 956" "0,1" bitfld.long 0x00 27. " GMB955 ,Group Modifier Bit 955" "0,1" bitfld.long 0x00 26. " GMB954 ,Group Modifier Bit 954" "0,1" textline " " bitfld.long 0x00 25. " GMB953 ,Group Modifier Bit 953" "0,1" bitfld.long 0x00 24. " GMB952 ,Group Modifier Bit 952" "0,1" bitfld.long 0x00 23. " GMB951 ,Group Modifier Bit 951" "0,1" textline " " bitfld.long 0x00 22. " GMB950 ,Group Modifier Bit 950" "0,1" bitfld.long 0x00 21. " GMB949 ,Group Modifier Bit 949" "0,1" bitfld.long 0x00 20. " GMB948 ,Group Modifier Bit 948" "0,1" textline " " bitfld.long 0x00 19. " GMB947 ,Group Modifier Bit 947" "0,1" bitfld.long 0x00 18. " GMB946 ,Group Modifier Bit 946" "0,1" bitfld.long 0x00 17. " GMB945 ,Group Modifier Bit 945" "0,1" textline " " bitfld.long 0x00 16. " GMB944 ,Group Modifier Bit 944" "0,1" bitfld.long 0x00 15. " GMB943 ,Group Modifier Bit 943" "0,1" bitfld.long 0x00 14. " GMB942 ,Group Modifier Bit 942" "0,1" textline " " bitfld.long 0x00 13. " GMB941 ,Group Modifier Bit 941" "0,1" bitfld.long 0x00 12. " GMB940 ,Group Modifier Bit 940" "0,1" bitfld.long 0x00 11. " GMB939 ,Group Modifier Bit 939" "0,1" textline " " bitfld.long 0x00 10. " GMB938 ,Group Modifier Bit 938" "0,1" bitfld.long 0x00 9. " GMB937 ,Group Modifier Bit 937" "0,1" bitfld.long 0x00 8. " GMB936 ,Group Modifier Bit 936" "0,1" textline " " bitfld.long 0x00 7. " GMB935 ,Group Modifier Bit 935" "0,1" bitfld.long 0x00 6. " GMB934 ,Group Modifier Bit 934" "0,1" bitfld.long 0x00 5. " GMB933 ,Group Modifier Bit 933" "0,1" textline " " bitfld.long 0x00 4. " GMB932 ,Group Modifier Bit 932" "0,1" bitfld.long 0x00 3. " GMB931 ,Group Modifier Bit 931" "0,1" bitfld.long 0x00 2. " GMB930 ,Group Modifier Bit 930" "0,1" textline " " bitfld.long 0x00 1. " GMB929 ,Group Modifier Bit 929" "0,1" bitfld.long 0x00 0. " GMB928 ,Group Modifier Bit 928" "0,1" else hgroup.long 0x0D74++0x03 hide.long 0x0 "GICD_IGRPMODR29,Interrupt Group Modifier Register 29" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D78))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)) group.long 0x0D78++0x03 line.long 0x0 "GICD_IGRPMODR30,Interrupt Group Modifier Register 30" bitfld.long 0x00 31. " GMB991 ,Group Modifier Bit 991" "0,1" bitfld.long 0x00 30. " GMB990 ,Group Modifier Bit 990" "0,1" bitfld.long 0x00 29. " GMB989 ,Group Modifier Bit 989" "0,1" textline " " bitfld.long 0x00 28. " GMB988 ,Group Modifier Bit 988" "0,1" bitfld.long 0x00 27. " GMB987 ,Group Modifier Bit 987" "0,1" bitfld.long 0x00 26. " GMB986 ,Group Modifier Bit 986" "0,1" textline " " bitfld.long 0x00 25. " GMB985 ,Group Modifier Bit 985" "0,1" bitfld.long 0x00 24. " GMB984 ,Group Modifier Bit 984" "0,1" bitfld.long 0x00 23. " GMB983 ,Group Modifier Bit 983" "0,1" textline " " bitfld.long 0x00 22. " GMB982 ,Group Modifier Bit 982" "0,1" bitfld.long 0x00 21. " GMB981 ,Group Modifier Bit 981" "0,1" bitfld.long 0x00 20. " GMB980 ,Group Modifier Bit 980" "0,1" textline " " bitfld.long 0x00 19. " GMB979 ,Group Modifier Bit 979" "0,1" bitfld.long 0x00 18. " GMB978 ,Group Modifier Bit 978" "0,1" bitfld.long 0x00 17. " GMB977 ,Group Modifier Bit 977" "0,1" textline " " bitfld.long 0x00 16. " GMB976 ,Group Modifier Bit 976" "0,1" bitfld.long 0x00 15. " GMB975 ,Group Modifier Bit 975" "0,1" bitfld.long 0x00 14. " GMB974 ,Group Modifier Bit 974" "0,1" textline " " bitfld.long 0x00 13. " GMB973 ,Group Modifier Bit 973" "0,1" bitfld.long 0x00 12. " GMB972 ,Group Modifier Bit 972" "0,1" bitfld.long 0x00 11. " GMB971 ,Group Modifier Bit 971" "0,1" textline " " bitfld.long 0x00 10. " GMB970 ,Group Modifier Bit 970" "0,1" bitfld.long 0x00 9. " GMB969 ,Group Modifier Bit 969" "0,1" bitfld.long 0x00 8. " GMB968 ,Group Modifier Bit 968" "0,1" textline " " bitfld.long 0x00 7. " GMB967 ,Group Modifier Bit 967" "0,1" bitfld.long 0x00 6. " GMB966 ,Group Modifier Bit 966" "0,1" bitfld.long 0x00 5. " GMB965 ,Group Modifier Bit 965" "0,1" textline " " bitfld.long 0x00 4. " GMB964 ,Group Modifier Bit 964" "0,1" bitfld.long 0x00 3. " GMB963 ,Group Modifier Bit 963" "0,1" bitfld.long 0x00 2. " GMB962 ,Group Modifier Bit 962" "0,1" textline " " bitfld.long 0x00 1. " GMB961 ,Group Modifier Bit 961" "0,1" bitfld.long 0x00 0. " GMB960 ,Group Modifier Bit 960" "0,1" else hgroup.long 0x0D78++0x03 hide.long 0x0 "GICD_IGRPMODR30,Interrupt Group Modifier Register 30" endif tree.end width 14. tree "Non-secure Access Control Registers" hgroup.long 0x0E00++0x03 hide.long 0x00 "GICD_NSACR0,Non-secure Access Control Register 0" hgroup.long 0xE04++0x03 hide.long 0x00 "GICD_NSACR1,Non-secure Access Control Register 1" if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE08))) group.long 0xE08++0x03 line.long 0x00 "GICD_NSACR2,Non-secure Access Control Register 2" bitfld.long 0x00 30.--31. " NS_ACCESS47 ,Controls Non-secure access of the interrupt with ID47 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS46 ,Controls Non-secure access of the interrupt with ID46 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS45 ,Controls Non-secure access of the interrupt with ID45 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS44 ,Controls Non-secure access of the interrupt with ID44 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS43 ,Controls Non-secure access of the interrupt with ID43 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS42 ,Controls Non-secure access of the interrupt with ID42 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS41 ,Controls Non-secure access of the interrupt with ID41 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS40 ,Controls Non-secure access of the interrupt with ID40 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS39 ,Controls Non-secure access of the interrupt with ID39 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS38 ,Controls Non-secure access of the interrupt with ID38 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS37 ,Controls Non-secure access of the interrupt with ID37 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS36 ,Controls Non-secure access of the interrupt with ID36 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS35 ,Controls Non-secure access of the interrupt with ID35 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS34 ,Controls Non-secure access of the interrupt with ID34 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS33 ,Controls Non-secure access of the interrupt with ID33 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS32 ,Controls Non-secure access of the interrupt with ID32 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE08++0x03 hide.long 0x00 "GICD_NSACR2,Non-secure Access Control Register 2" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE0C))) group.long 0xE0C++0x03 line.long 0x00 "GICD_NSACR3,Non-secure Access Control Register 3" bitfld.long 0x00 30.--31. " NS_ACCESS63 ,Controls Non-secure access of the interrupt with ID63 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS62 ,Controls Non-secure access of the interrupt with ID62 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS61 ,Controls Non-secure access of the interrupt with ID61 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS60 ,Controls Non-secure access of the interrupt with ID60 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS59 ,Controls Non-secure access of the interrupt with ID59 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS58 ,Controls Non-secure access of the interrupt with ID58 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS57 ,Controls Non-secure access of the interrupt with ID57 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS56 ,Controls Non-secure access of the interrupt with ID56 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS55 ,Controls Non-secure access of the interrupt with ID55 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS54 ,Controls Non-secure access of the interrupt with ID54 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS53 ,Controls Non-secure access of the interrupt with ID53 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS52 ,Controls Non-secure access of the interrupt with ID52 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS51 ,Controls Non-secure access of the interrupt with ID51 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS50 ,Controls Non-secure access of the interrupt with ID50 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS49 ,Controls Non-secure access of the interrupt with ID49 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS48 ,Controls Non-secure access of the interrupt with ID48 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE0C++0x03 hide.long 0x00 "GICD_NSACR3,Non-secure Access Control Register 3" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE10))) group.long 0xE10++0x03 line.long 0x00 "GICD_NSACR4,Non-secure Access Control Register 4" bitfld.long 0x00 30.--31. " NS_ACCESS79 ,Controls Non-secure access of the interrupt with ID79 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS78 ,Controls Non-secure access of the interrupt with ID78 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS77 ,Controls Non-secure access of the interrupt with ID77 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS76 ,Controls Non-secure access of the interrupt with ID76 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS75 ,Controls Non-secure access of the interrupt with ID75 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS74 ,Controls Non-secure access of the interrupt with ID74 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS73 ,Controls Non-secure access of the interrupt with ID73 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS72 ,Controls Non-secure access of the interrupt with ID72 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS71 ,Controls Non-secure access of the interrupt with ID71 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS70 ,Controls Non-secure access of the interrupt with ID70 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS69 ,Controls Non-secure access of the interrupt with ID69 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS68 ,Controls Non-secure access of the interrupt with ID68 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS67 ,Controls Non-secure access of the interrupt with ID67 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS66 ,Controls Non-secure access of the interrupt with ID66 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS65 ,Controls Non-secure access of the interrupt with ID65 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS64 ,Controls Non-secure access of the interrupt with ID64 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE10++0x03 hide.long 0x00 "GICD_NSACR4,Non-secure Access Control Register 4" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE14))) group.long 0xE14++0x03 line.long 0x00 "GICD_NSACR5,Non-secure Access Control Register 5" bitfld.long 0x00 30.--31. " NS_ACCESS95 ,Controls Non-secure access of the interrupt with ID95 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS94 ,Controls Non-secure access of the interrupt with ID94 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS93 ,Controls Non-secure access of the interrupt with ID93 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS92 ,Controls Non-secure access of the interrupt with ID92 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS91 ,Controls Non-secure access of the interrupt with ID91 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS90 ,Controls Non-secure access of the interrupt with ID90 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS89 ,Controls Non-secure access of the interrupt with ID89 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS88 ,Controls Non-secure access of the interrupt with ID88 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS87 ,Controls Non-secure access of the interrupt with ID87 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS86 ,Controls Non-secure access of the interrupt with ID86 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS85 ,Controls Non-secure access of the interrupt with ID85 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS84 ,Controls Non-secure access of the interrupt with ID84 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS83 ,Controls Non-secure access of the interrupt with ID83 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS82 ,Controls Non-secure access of the interrupt with ID82 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS81 ,Controls Non-secure access of the interrupt with ID81 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS80 ,Controls Non-secure access of the interrupt with ID80 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE14++0x03 hide.long 0x00 "GICD_NSACR5,Non-secure Access Control Register 5" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE18))) group.long 0xE18++0x03 line.long 0x00 "GICD_NSACR6,Non-secure Access Control Register 6" bitfld.long 0x00 30.--31. " NS_ACCESS111 ,Controls Non-secure access of the interrupt with ID111" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS110 ,Controls Non-secure access of the interrupt with ID110" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS109 ,Controls Non-secure access of the interrupt with ID109" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS108 ,Controls Non-secure access of the interrupt with ID108" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS107 ,Controls Non-secure access of the interrupt with ID107" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS106 ,Controls Non-secure access of the interrupt with ID106" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS105 ,Controls Non-secure access of the interrupt with ID105" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS104 ,Controls Non-secure access of the interrupt with ID104" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS103 ,Controls Non-secure access of the interrupt with ID103" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS102 ,Controls Non-secure access of the interrupt with ID102" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS101 ,Controls Non-secure access of the interrupt with ID101" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS100 ,Controls Non-secure access of the interrupt with ID100" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS99 ,Controls Non-secure access of the interrupt with ID99 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS98 ,Controls Non-secure access of the interrupt with ID98 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS97 ,Controls Non-secure access of the interrupt with ID97 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS96 ,Controls Non-secure access of the interrupt with ID96 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE18++0x03 hide.long 0x00 "GICD_NSACR6,Non-secure Access Control Register 6" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE1C))) group.long 0xE1C++0x03 line.long 0x00 "GICD_NSACR7,Non-secure Access Control Register 7" bitfld.long 0x00 30.--31. " NS_ACCESS127 ,Controls Non-secure access of the interrupt with ID127" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS126 ,Controls Non-secure access of the interrupt with ID126" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS125 ,Controls Non-secure access of the interrupt with ID125" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS124 ,Controls Non-secure access of the interrupt with ID124" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS123 ,Controls Non-secure access of the interrupt with ID123" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS122 ,Controls Non-secure access of the interrupt with ID122" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS121 ,Controls Non-secure access of the interrupt with ID121" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS120 ,Controls Non-secure access of the interrupt with ID120" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS119 ,Controls Non-secure access of the interrupt with ID119" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS118 ,Controls Non-secure access of the interrupt with ID118" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS117 ,Controls Non-secure access of the interrupt with ID117" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS116 ,Controls Non-secure access of the interrupt with ID116" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS115 ,Controls Non-secure access of the interrupt with ID115" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS114 ,Controls Non-secure access of the interrupt with ID114" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS113 ,Controls Non-secure access of the interrupt with ID113" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS112 ,Controls Non-secure access of the interrupt with ID112" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE1C++0x03 hide.long 0x00 "GICD_NSACR7,Non-secure Access Control Register 7" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE20))) group.long 0xE20++0x03 line.long 0x00 "GICD_NSACR8,Non-secure Access Control Register 8" bitfld.long 0x00 30.--31. " NS_ACCESS143 ,Controls Non-secure access of the interrupt with ID143" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS142 ,Controls Non-secure access of the interrupt with ID142" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS141 ,Controls Non-secure access of the interrupt with ID141" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS140 ,Controls Non-secure access of the interrupt with ID140" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS139 ,Controls Non-secure access of the interrupt with ID139" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS138 ,Controls Non-secure access of the interrupt with ID138" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS137 ,Controls Non-secure access of the interrupt with ID137" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS136 ,Controls Non-secure access of the interrupt with ID136" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS135 ,Controls Non-secure access of the interrupt with ID135" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS134 ,Controls Non-secure access of the interrupt with ID134" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS133 ,Controls Non-secure access of the interrupt with ID133" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS132 ,Controls Non-secure access of the interrupt with ID132" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS131 ,Controls Non-secure access of the interrupt with ID131" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS130 ,Controls Non-secure access of the interrupt with ID130" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS129 ,Controls Non-secure access of the interrupt with ID129" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS128 ,Controls Non-secure access of the interrupt with ID128" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE20++0x03 hide.long 0x00 "GICD_NSACR8,Non-secure Access Control Register 8" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE24))) group.long 0xE24++0x03 line.long 0x00 "GICD_NSACR9,Non-secure Access Control Register 9" bitfld.long 0x00 30.--31. " NS_ACCESS159 ,Controls Non-secure access of the interrupt with ID159" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS158 ,Controls Non-secure access of the interrupt with ID158" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS157 ,Controls Non-secure access of the interrupt with ID157" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS156 ,Controls Non-secure access of the interrupt with ID156" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS155 ,Controls Non-secure access of the interrupt with ID155" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS154 ,Controls Non-secure access of the interrupt with ID154" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS153 ,Controls Non-secure access of the interrupt with ID153" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS152 ,Controls Non-secure access of the interrupt with ID152" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS151 ,Controls Non-secure access of the interrupt with ID151" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS150 ,Controls Non-secure access of the interrupt with ID150" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS149 ,Controls Non-secure access of the interrupt with ID149" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS148 ,Controls Non-secure access of the interrupt with ID148" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS147 ,Controls Non-secure access of the interrupt with ID147" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS146 ,Controls Non-secure access of the interrupt with ID146" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS145 ,Controls Non-secure access of the interrupt with ID145" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS144 ,Controls Non-secure access of the interrupt with ID144" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE24++0x03 hide.long 0x00 "GICD_NSACR9,Non-secure Access Control Register 9" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE28))) group.long 0xE28++0x03 line.long 0x00 "GICD_NSACR10,Non-secure Access Control Register 10" bitfld.long 0x00 30.--31. " NS_ACCESS175 ,Controls Non-secure access of the interrupt with ID175" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS174 ,Controls Non-secure access of the interrupt with ID174" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS173 ,Controls Non-secure access of the interrupt with ID173" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS172 ,Controls Non-secure access of the interrupt with ID172" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS171 ,Controls Non-secure access of the interrupt with ID171" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS170 ,Controls Non-secure access of the interrupt with ID170" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS169 ,Controls Non-secure access of the interrupt with ID169" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS168 ,Controls Non-secure access of the interrupt with ID168" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS167 ,Controls Non-secure access of the interrupt with ID167" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS166 ,Controls Non-secure access of the interrupt with ID166" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS165 ,Controls Non-secure access of the interrupt with ID165" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS164 ,Controls Non-secure access of the interrupt with ID164" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS163 ,Controls Non-secure access of the interrupt with ID163" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS162 ,Controls Non-secure access of the interrupt with ID162" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS161 ,Controls Non-secure access of the interrupt with ID161" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS160 ,Controls Non-secure access of the interrupt with ID160" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE28++0x03 hide.long 0x00 "GICD_NSACR10,Non-secure Access Control Register 10" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE2C))) group.long 0xE2C++0x03 line.long 0x00 "GICD_NSACR11,Non-secure Access Control Register 11" bitfld.long 0x00 30.--31. " NS_ACCESS191 ,Controls Non-secure access of the interrupt with ID191" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS190 ,Controls Non-secure access of the interrupt with ID190" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS189 ,Controls Non-secure access of the interrupt with ID189" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS188 ,Controls Non-secure access of the interrupt with ID188" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS187 ,Controls Non-secure access of the interrupt with ID187" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS186 ,Controls Non-secure access of the interrupt with ID186" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS185 ,Controls Non-secure access of the interrupt with ID185" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS184 ,Controls Non-secure access of the interrupt with ID184" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS183 ,Controls Non-secure access of the interrupt with ID183" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS182 ,Controls Non-secure access of the interrupt with ID182" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS181 ,Controls Non-secure access of the interrupt with ID181" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS180 ,Controls Non-secure access of the interrupt with ID180" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS179 ,Controls Non-secure access of the interrupt with ID179" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS178 ,Controls Non-secure access of the interrupt with ID178" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS177 ,Controls Non-secure access of the interrupt with ID177" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS176 ,Controls Non-secure access of the interrupt with ID176" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE2C++0x03 hide.long 0x00 "GICD_NSACR11,Non-secure Access Control Register 11" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE30))) group.long 0xE30++0x03 line.long 0x00 "GICD_NSACR12,Non-secure Access Control Register 12" bitfld.long 0x00 30.--31. " NS_ACCESS207 ,Controls Non-secure access of the interrupt with ID207" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS206 ,Controls Non-secure access of the interrupt with ID206" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS205 ,Controls Non-secure access of the interrupt with ID205" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS204 ,Controls Non-secure access of the interrupt with ID204" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS203 ,Controls Non-secure access of the interrupt with ID203" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS202 ,Controls Non-secure access of the interrupt with ID202" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS201 ,Controls Non-secure access of the interrupt with ID201" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS200 ,Controls Non-secure access of the interrupt with ID200" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS199 ,Controls Non-secure access of the interrupt with ID199" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS198 ,Controls Non-secure access of the interrupt with ID198" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS197 ,Controls Non-secure access of the interrupt with ID197" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS196 ,Controls Non-secure access of the interrupt with ID196" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS195 ,Controls Non-secure access of the interrupt with ID195" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS194 ,Controls Non-secure access of the interrupt with ID194" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS193 ,Controls Non-secure access of the interrupt with ID193" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS192 ,Controls Non-secure access of the interrupt with ID192" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE30++0x03 hide.long 0x00 "GICD_NSACR12,Non-secure Access Control Register 12" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE34))) group.long 0xE34++0x03 line.long 0x00 "GICD_NSACR13,Non-secure Access Control Register 13" bitfld.long 0x00 30.--31. " NS_ACCESS223 ,Controls Non-secure access of the interrupt with ID223" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS222 ,Controls Non-secure access of the interrupt with ID222" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS221 ,Controls Non-secure access of the interrupt with ID221" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS220 ,Controls Non-secure access of the interrupt with ID220" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS219 ,Controls Non-secure access of the interrupt with ID219" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS218 ,Controls Non-secure access of the interrupt with ID218" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS217 ,Controls Non-secure access of the interrupt with ID217" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS216 ,Controls Non-secure access of the interrupt with ID216" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS215 ,Controls Non-secure access of the interrupt with ID215" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS214 ,Controls Non-secure access of the interrupt with ID214" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS213 ,Controls Non-secure access of the interrupt with ID213" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS212 ,Controls Non-secure access of the interrupt with ID212" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS211 ,Controls Non-secure access of the interrupt with ID211" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS210 ,Controls Non-secure access of the interrupt with ID210" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS209 ,Controls Non-secure access of the interrupt with ID209" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS208 ,Controls Non-secure access of the interrupt with ID208" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE34++0x03 hide.long 0x00 "GICD_NSACR13,Non-secure Access Control Register 13" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE38))) group.long 0xE38++0x03 line.long 0x00 "GICD_NSACR14,Non-secure Access Control Register 14" bitfld.long 0x00 30.--31. " NS_ACCESS239 ,Controls Non-secure access of the interrupt with ID239" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS238 ,Controls Non-secure access of the interrupt with ID238" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS237 ,Controls Non-secure access of the interrupt with ID237" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS236 ,Controls Non-secure access of the interrupt with ID236" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS235 ,Controls Non-secure access of the interrupt with ID235" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS234 ,Controls Non-secure access of the interrupt with ID234" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS233 ,Controls Non-secure access of the interrupt with ID233" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS232 ,Controls Non-secure access of the interrupt with ID232" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS231 ,Controls Non-secure access of the interrupt with ID231" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS230 ,Controls Non-secure access of the interrupt with ID230" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS229 ,Controls Non-secure access of the interrupt with ID229" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS228 ,Controls Non-secure access of the interrupt with ID228" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS227 ,Controls Non-secure access of the interrupt with ID227" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS226 ,Controls Non-secure access of the interrupt with ID226" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS225 ,Controls Non-secure access of the interrupt with ID225" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS224 ,Controls Non-secure access of the interrupt with ID224" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE38++0x03 hide.long 0x00 "GICD_NSACR14,Non-secure Access Control Register 14" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE3C))) group.long 0xE3C++0x03 line.long 0x00 "GICD_NSACR15,Non-secure Access Control Register 15" bitfld.long 0x00 30.--31. " NS_ACCESS255 ,Controls Non-secure access of the interrupt with ID255" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS254 ,Controls Non-secure access of the interrupt with ID254" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS253 ,Controls Non-secure access of the interrupt with ID253" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS252 ,Controls Non-secure access of the interrupt with ID252" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS251 ,Controls Non-secure access of the interrupt with ID251" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS250 ,Controls Non-secure access of the interrupt with ID250" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS249 ,Controls Non-secure access of the interrupt with ID249" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS248 ,Controls Non-secure access of the interrupt with ID248" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS247 ,Controls Non-secure access of the interrupt with ID247" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS246 ,Controls Non-secure access of the interrupt with ID246" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS245 ,Controls Non-secure access of the interrupt with ID245" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS244 ,Controls Non-secure access of the interrupt with ID244" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS243 ,Controls Non-secure access of the interrupt with ID243" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS242 ,Controls Non-secure access of the interrupt with ID242" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS241 ,Controls Non-secure access of the interrupt with ID241" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS240 ,Controls Non-secure access of the interrupt with ID240" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE3C++0x03 hide.long 0x00 "GICD_NSACR15,Non-secure Access Control Register 15" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE40))) group.long 0xE40++0x03 line.long 0x00 "GICD_NSACR16,Non-secure Access Control Register 16" bitfld.long 0x00 30.--31. " NS_ACCESS271 ,Controls Non-secure access of the interrupt with ID271" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS270 ,Controls Non-secure access of the interrupt with ID270" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS269 ,Controls Non-secure access of the interrupt with ID269" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS268 ,Controls Non-secure access of the interrupt with ID268" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS267 ,Controls Non-secure access of the interrupt with ID267" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS266 ,Controls Non-secure access of the interrupt with ID266" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS265 ,Controls Non-secure access of the interrupt with ID265" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS264 ,Controls Non-secure access of the interrupt with ID264" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS263 ,Controls Non-secure access of the interrupt with ID263" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS262 ,Controls Non-secure access of the interrupt with ID262" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS261 ,Controls Non-secure access of the interrupt with ID261" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS260 ,Controls Non-secure access of the interrupt with ID260" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS259 ,Controls Non-secure access of the interrupt with ID259" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS258 ,Controls Non-secure access of the interrupt with ID258" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS257 ,Controls Non-secure access of the interrupt with ID257" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS256 ,Controls Non-secure access of the interrupt with ID256" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE40++0x03 hide.long 0x00 "GICD_NSACR16,Non-secure Access Control Register 16" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE44))) group.long 0xE44++0x03 line.long 0x00 "GICD_NSACR17,Non-secure Access Control Register 17" bitfld.long 0x00 30.--31. " NS_ACCESS287 ,Controls Non-secure access of the interrupt with ID287" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS286 ,Controls Non-secure access of the interrupt with ID286" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS285 ,Controls Non-secure access of the interrupt with ID285" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS284 ,Controls Non-secure access of the interrupt with ID284" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS283 ,Controls Non-secure access of the interrupt with ID283" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS282 ,Controls Non-secure access of the interrupt with ID282" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS281 ,Controls Non-secure access of the interrupt with ID281" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS280 ,Controls Non-secure access of the interrupt with ID280" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS279 ,Controls Non-secure access of the interrupt with ID279" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS278 ,Controls Non-secure access of the interrupt with ID278" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS277 ,Controls Non-secure access of the interrupt with ID277" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS276 ,Controls Non-secure access of the interrupt with ID276" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS275 ,Controls Non-secure access of the interrupt with ID275" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS274 ,Controls Non-secure access of the interrupt with ID274" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS273 ,Controls Non-secure access of the interrupt with ID273" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS272 ,Controls Non-secure access of the interrupt with ID272" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE44++0x03 hide.long 0x00 "GICD_NSACR17,Non-secure Access Control Register 17" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE48))) group.long 0xE48++0x03 line.long 0x00 "GICD_NSACR18,Non-secure Access Control Register 18" bitfld.long 0x00 30.--31. " NS_ACCESS303 ,Controls Non-secure access of the interrupt with ID303" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS302 ,Controls Non-secure access of the interrupt with ID302" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS301 ,Controls Non-secure access of the interrupt with ID301" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS300 ,Controls Non-secure access of the interrupt with ID300" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS299 ,Controls Non-secure access of the interrupt with ID299" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS298 ,Controls Non-secure access of the interrupt with ID298" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS297 ,Controls Non-secure access of the interrupt with ID297" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS296 ,Controls Non-secure access of the interrupt with ID296" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS295 ,Controls Non-secure access of the interrupt with ID295" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS294 ,Controls Non-secure access of the interrupt with ID294" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS293 ,Controls Non-secure access of the interrupt with ID293" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS292 ,Controls Non-secure access of the interrupt with ID292" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS291 ,Controls Non-secure access of the interrupt with ID291" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS290 ,Controls Non-secure access of the interrupt with ID290" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS289 ,Controls Non-secure access of the interrupt with ID289" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS288 ,Controls Non-secure access of the interrupt with ID288" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE48++0x03 hide.long 0x00 "GICD_NSACR18,Non-secure Access Control Register 18" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE4C))) group.long 0xE4C++0x03 line.long 0x00 "GICD_NSACR19,Non-secure Access Control Register 19" bitfld.long 0x00 30.--31. " NS_ACCESS319 ,Controls Non-secure access of the interrupt with ID319" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS318 ,Controls Non-secure access of the interrupt with ID318" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS317 ,Controls Non-secure access of the interrupt with ID317" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS316 ,Controls Non-secure access of the interrupt with ID316" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS315 ,Controls Non-secure access of the interrupt with ID315" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS314 ,Controls Non-secure access of the interrupt with ID314" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS313 ,Controls Non-secure access of the interrupt with ID313" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS312 ,Controls Non-secure access of the interrupt with ID312" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS311 ,Controls Non-secure access of the interrupt with ID311" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS310 ,Controls Non-secure access of the interrupt with ID310" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS309 ,Controls Non-secure access of the interrupt with ID309" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS308 ,Controls Non-secure access of the interrupt with ID308" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS307 ,Controls Non-secure access of the interrupt with ID307" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS306 ,Controls Non-secure access of the interrupt with ID306" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS305 ,Controls Non-secure access of the interrupt with ID305" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS304 ,Controls Non-secure access of the interrupt with ID304" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE4C++0x03 hide.long 0x00 "GICD_NSACR19,Non-secure Access Control Register 19" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE50))) group.long 0xE50++0x03 line.long 0x00 "GICD_NSACR20,Non-secure Access Control Register 20" bitfld.long 0x00 30.--31. " NS_ACCESS335 ,Controls Non-secure access of the interrupt with ID335" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS334 ,Controls Non-secure access of the interrupt with ID334" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS333 ,Controls Non-secure access of the interrupt with ID333" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS332 ,Controls Non-secure access of the interrupt with ID332" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS331 ,Controls Non-secure access of the interrupt with ID331" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS330 ,Controls Non-secure access of the interrupt with ID330" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS329 ,Controls Non-secure access of the interrupt with ID329" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS328 ,Controls Non-secure access of the interrupt with ID328" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS327 ,Controls Non-secure access of the interrupt with ID327" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS326 ,Controls Non-secure access of the interrupt with ID326" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS325 ,Controls Non-secure access of the interrupt with ID325" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS324 ,Controls Non-secure access of the interrupt with ID324" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS323 ,Controls Non-secure access of the interrupt with ID323" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS322 ,Controls Non-secure access of the interrupt with ID322" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS321 ,Controls Non-secure access of the interrupt with ID321" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS320 ,Controls Non-secure access of the interrupt with ID320" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE50++0x03 hide.long 0x00 "GICD_NSACR20,Non-secure Access Control Register 20" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE54))) group.long 0xE54++0x03 line.long 0x00 "GICD_NSACR21,Non-secure Access Control Register 21" bitfld.long 0x00 30.--31. " NS_ACCESS351 ,Controls Non-secure access of the interrupt with ID351" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS350 ,Controls Non-secure access of the interrupt with ID350" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS349 ,Controls Non-secure access of the interrupt with ID349" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS348 ,Controls Non-secure access of the interrupt with ID348" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS347 ,Controls Non-secure access of the interrupt with ID347" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS346 ,Controls Non-secure access of the interrupt with ID346" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS345 ,Controls Non-secure access of the interrupt with ID345" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS344 ,Controls Non-secure access of the interrupt with ID344" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS343 ,Controls Non-secure access of the interrupt with ID343" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS342 ,Controls Non-secure access of the interrupt with ID342" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS341 ,Controls Non-secure access of the interrupt with ID341" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS340 ,Controls Non-secure access of the interrupt with ID340" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS339 ,Controls Non-secure access of the interrupt with ID339" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS338 ,Controls Non-secure access of the interrupt with ID338" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS337 ,Controls Non-secure access of the interrupt with ID337" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS336 ,Controls Non-secure access of the interrupt with ID336" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE54++0x03 hide.long 0x00 "GICD_NSACR21,Non-secure Access Control Register 21" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE58))) group.long 0xE58++0x03 line.long 0x00 "GICD_NSACR22,Non-secure Access Control Register 22" bitfld.long 0x00 30.--31. " NS_ACCESS367 ,Controls Non-secure access of the interrupt with ID367" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS366 ,Controls Non-secure access of the interrupt with ID366" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS365 ,Controls Non-secure access of the interrupt with ID365" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS364 ,Controls Non-secure access of the interrupt with ID364" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS363 ,Controls Non-secure access of the interrupt with ID363" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS362 ,Controls Non-secure access of the interrupt with ID362" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS361 ,Controls Non-secure access of the interrupt with ID361" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS360 ,Controls Non-secure access of the interrupt with ID360" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS359 ,Controls Non-secure access of the interrupt with ID359" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS358 ,Controls Non-secure access of the interrupt with ID358" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS357 ,Controls Non-secure access of the interrupt with ID357" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS356 ,Controls Non-secure access of the interrupt with ID356" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS355 ,Controls Non-secure access of the interrupt with ID355" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS354 ,Controls Non-secure access of the interrupt with ID354" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS353 ,Controls Non-secure access of the interrupt with ID353" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS352 ,Controls Non-secure access of the interrupt with ID352" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE58++0x03 hide.long 0x00 "GICD_NSACR22,Non-secure Access Control Register 22" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE5C))) group.long 0xE5C++0x03 line.long 0x00 "GICD_NSACR23,Non-secure Access Control Register 23" bitfld.long 0x00 30.--31. " NS_ACCESS383 ,Controls Non-secure access of the interrupt with ID383" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS382 ,Controls Non-secure access of the interrupt with ID382" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS381 ,Controls Non-secure access of the interrupt with ID381" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS380 ,Controls Non-secure access of the interrupt with ID380" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS379 ,Controls Non-secure access of the interrupt with ID379" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS378 ,Controls Non-secure access of the interrupt with ID378" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS377 ,Controls Non-secure access of the interrupt with ID377" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS376 ,Controls Non-secure access of the interrupt with ID376" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS375 ,Controls Non-secure access of the interrupt with ID375" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS374 ,Controls Non-secure access of the interrupt with ID374" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS373 ,Controls Non-secure access of the interrupt with ID373" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS372 ,Controls Non-secure access of the interrupt with ID372" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS371 ,Controls Non-secure access of the interrupt with ID371" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS370 ,Controls Non-secure access of the interrupt with ID370" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS369 ,Controls Non-secure access of the interrupt with ID369" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS368 ,Controls Non-secure access of the interrupt with ID368" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE5C++0x03 hide.long 0x00 "GICD_NSACR23,Non-secure Access Control Register 23" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE60))) group.long 0xE60++0x03 line.long 0x00 "GICD_NSACR24,Non-secure Access Control Register 24" bitfld.long 0x00 30.--31. " NS_ACCESS399 ,Controls Non-secure access of the interrupt with ID399" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS398 ,Controls Non-secure access of the interrupt with ID398" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS397 ,Controls Non-secure access of the interrupt with ID397" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS396 ,Controls Non-secure access of the interrupt with ID396" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS395 ,Controls Non-secure access of the interrupt with ID395" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS394 ,Controls Non-secure access of the interrupt with ID394" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS393 ,Controls Non-secure access of the interrupt with ID393" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS392 ,Controls Non-secure access of the interrupt with ID392" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS391 ,Controls Non-secure access of the interrupt with ID391" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS390 ,Controls Non-secure access of the interrupt with ID390" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS389 ,Controls Non-secure access of the interrupt with ID389" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS388 ,Controls Non-secure access of the interrupt with ID388" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS387 ,Controls Non-secure access of the interrupt with ID387" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS386 ,Controls Non-secure access of the interrupt with ID386" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS385 ,Controls Non-secure access of the interrupt with ID385" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS384 ,Controls Non-secure access of the interrupt with ID384" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE60++0x03 hide.long 0x00 "GICD_NSACR24,Non-secure Access Control Register 24" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE64))) group.long 0xE64++0x03 line.long 0x00 "GICD_NSACR25,Non-secure Access Control Register 25" bitfld.long 0x00 30.--31. " NS_ACCESS415 ,Controls Non-secure access of the interrupt with ID415" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS414 ,Controls Non-secure access of the interrupt with ID414" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS413 ,Controls Non-secure access of the interrupt with ID413" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS412 ,Controls Non-secure access of the interrupt with ID412" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS411 ,Controls Non-secure access of the interrupt with ID411" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS410 ,Controls Non-secure access of the interrupt with ID410" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS409 ,Controls Non-secure access of the interrupt with ID409" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS408 ,Controls Non-secure access of the interrupt with ID408" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS407 ,Controls Non-secure access of the interrupt with ID407" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS406 ,Controls Non-secure access of the interrupt with ID406" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS405 ,Controls Non-secure access of the interrupt with ID405" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS404 ,Controls Non-secure access of the interrupt with ID404" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS403 ,Controls Non-secure access of the interrupt with ID403" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS402 ,Controls Non-secure access of the interrupt with ID402" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS401 ,Controls Non-secure access of the interrupt with ID401" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS400 ,Controls Non-secure access of the interrupt with ID400" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE64++0x03 hide.long 0x00 "GICD_NSACR25,Non-secure Access Control Register 25" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE68))) group.long 0xE68++0x03 line.long 0x00 "GICD_NSACR26,Non-secure Access Control Register 26" bitfld.long 0x00 30.--31. " NS_ACCESS431 ,Controls Non-secure access of the interrupt with ID431" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS430 ,Controls Non-secure access of the interrupt with ID430" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS429 ,Controls Non-secure access of the interrupt with ID429" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS428 ,Controls Non-secure access of the interrupt with ID428" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS427 ,Controls Non-secure access of the interrupt with ID427" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS426 ,Controls Non-secure access of the interrupt with ID426" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS425 ,Controls Non-secure access of the interrupt with ID425" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS424 ,Controls Non-secure access of the interrupt with ID424" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS423 ,Controls Non-secure access of the interrupt with ID423" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS422 ,Controls Non-secure access of the interrupt with ID422" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS421 ,Controls Non-secure access of the interrupt with ID421" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS420 ,Controls Non-secure access of the interrupt with ID420" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS419 ,Controls Non-secure access of the interrupt with ID419" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS418 ,Controls Non-secure access of the interrupt with ID418" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS417 ,Controls Non-secure access of the interrupt with ID417" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS416 ,Controls Non-secure access of the interrupt with ID416" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE68++0x03 hide.long 0x00 "GICD_NSACR26,Non-secure Access Control Register 26" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE6C))) group.long 0xE6C++0x03 line.long 0x00 "GICD_NSACR27,Non-secure Access Control Register 27" bitfld.long 0x00 30.--31. " NS_ACCESS447 ,Controls Non-secure access of the interrupt with ID447" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS446 ,Controls Non-secure access of the interrupt with ID446" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS445 ,Controls Non-secure access of the interrupt with ID445" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS444 ,Controls Non-secure access of the interrupt with ID444" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS443 ,Controls Non-secure access of the interrupt with ID443" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS442 ,Controls Non-secure access of the interrupt with ID442" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS441 ,Controls Non-secure access of the interrupt with ID441" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS440 ,Controls Non-secure access of the interrupt with ID440" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS439 ,Controls Non-secure access of the interrupt with ID439" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS438 ,Controls Non-secure access of the interrupt with ID438" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS437 ,Controls Non-secure access of the interrupt with ID437" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS436 ,Controls Non-secure access of the interrupt with ID436" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS435 ,Controls Non-secure access of the interrupt with ID435" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS434 ,Controls Non-secure access of the interrupt with ID434" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS433 ,Controls Non-secure access of the interrupt with ID433" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS432 ,Controls Non-secure access of the interrupt with ID432" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE6C++0x03 hide.long 0x00 "GICD_NSACR27,Non-secure Access Control Register 27" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE70))) group.long 0xE70++0x03 line.long 0x00 "GICD_NSACR28,Non-secure Access Control Register 28" bitfld.long 0x00 30.--31. " NS_ACCESS463 ,Controls Non-secure access of the interrupt with ID463" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS462 ,Controls Non-secure access of the interrupt with ID462" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS461 ,Controls Non-secure access of the interrupt with ID461" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS460 ,Controls Non-secure access of the interrupt with ID460" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS459 ,Controls Non-secure access of the interrupt with ID459" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS458 ,Controls Non-secure access of the interrupt with ID458" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS457 ,Controls Non-secure access of the interrupt with ID457" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS456 ,Controls Non-secure access of the interrupt with ID456" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS455 ,Controls Non-secure access of the interrupt with ID455" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS454 ,Controls Non-secure access of the interrupt with ID454" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS453 ,Controls Non-secure access of the interrupt with ID453" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS452 ,Controls Non-secure access of the interrupt with ID452" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS451 ,Controls Non-secure access of the interrupt with ID451" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS450 ,Controls Non-secure access of the interrupt with ID450" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS449 ,Controls Non-secure access of the interrupt with ID449" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS448 ,Controls Non-secure access of the interrupt with ID448" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE70++0x03 hide.long 0x00 "GICD_NSACR28,Non-secure Access Control Register 28" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE74))) group.long 0xE74++0x03 line.long 0x00 "GICD_NSACR29,Non-secure Access Control Register 29" bitfld.long 0x00 30.--31. " NS_ACCESS479 ,Controls Non-secure access of the interrupt with ID479" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS478 ,Controls Non-secure access of the interrupt with ID478" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS477 ,Controls Non-secure access of the interrupt with ID477" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS476 ,Controls Non-secure access of the interrupt with ID476" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS475 ,Controls Non-secure access of the interrupt with ID475" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS474 ,Controls Non-secure access of the interrupt with ID474" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS473 ,Controls Non-secure access of the interrupt with ID473" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS472 ,Controls Non-secure access of the interrupt with ID472" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS471 ,Controls Non-secure access of the interrupt with ID471" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS470 ,Controls Non-secure access of the interrupt with ID470" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS469 ,Controls Non-secure access of the interrupt with ID469" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS468 ,Controls Non-secure access of the interrupt with ID468" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS467 ,Controls Non-secure access of the interrupt with ID467" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS466 ,Controls Non-secure access of the interrupt with ID466" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS465 ,Controls Non-secure access of the interrupt with ID465" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS464 ,Controls Non-secure access of the interrupt with ID464" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE74++0x03 hide.long 0x00 "GICD_NSACR29,Non-secure Access Control Register 29" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE78))) group.long 0xE78++0x03 line.long 0x00 "GICD_NSACR30,Non-secure Access Control Register 30" bitfld.long 0x00 30.--31. " NS_ACCESS495 ,Controls Non-secure access of the interrupt with ID495" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS494 ,Controls Non-secure access of the interrupt with ID494" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS493 ,Controls Non-secure access of the interrupt with ID493" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS492 ,Controls Non-secure access of the interrupt with ID492" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS491 ,Controls Non-secure access of the interrupt with ID491" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS490 ,Controls Non-secure access of the interrupt with ID490" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS489 ,Controls Non-secure access of the interrupt with ID489" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS488 ,Controls Non-secure access of the interrupt with ID488" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS487 ,Controls Non-secure access of the interrupt with ID487" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS486 ,Controls Non-secure access of the interrupt with ID486" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS485 ,Controls Non-secure access of the interrupt with ID485" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS484 ,Controls Non-secure access of the interrupt with ID484" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS483 ,Controls Non-secure access of the interrupt with ID483" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS482 ,Controls Non-secure access of the interrupt with ID482" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS481 ,Controls Non-secure access of the interrupt with ID481" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS480 ,Controls Non-secure access of the interrupt with ID480" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE78++0x03 hide.long 0x00 "GICD_NSACR30,Non-secure Access Control Register 30" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE7C))) group.long 0xE7C++0x03 line.long 0x00 "GICD_NSACR31,Non-secure Access Control Register 31" bitfld.long 0x00 30.--31. " NS_ACCESS511 ,Controls Non-secure access of the interrupt with ID511" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS510 ,Controls Non-secure access of the interrupt with ID510" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS509 ,Controls Non-secure access of the interrupt with ID509" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS508 ,Controls Non-secure access of the interrupt with ID508" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS507 ,Controls Non-secure access of the interrupt with ID507" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS506 ,Controls Non-secure access of the interrupt with ID506" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS505 ,Controls Non-secure access of the interrupt with ID505" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS504 ,Controls Non-secure access of the interrupt with ID504" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS503 ,Controls Non-secure access of the interrupt with ID503" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS502 ,Controls Non-secure access of the interrupt with ID502" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS501 ,Controls Non-secure access of the interrupt with ID501" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS500 ,Controls Non-secure access of the interrupt with ID500" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS499 ,Controls Non-secure access of the interrupt with ID499" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS498 ,Controls Non-secure access of the interrupt with ID498" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS497 ,Controls Non-secure access of the interrupt with ID497" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS496 ,Controls Non-secure access of the interrupt with ID496" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE7C++0x03 hide.long 0x00 "GICD_NSACR31,Non-secure Access Control Register 31" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE80))) group.long 0xE80++0x03 line.long 0x00 "GICD_NSACR32,Non-secure Access Control Register 32" bitfld.long 0x00 30.--31. " NS_ACCESS527 ,Controls Non-secure access of the interrupt with ID527" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS526 ,Controls Non-secure access of the interrupt with ID526" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS525 ,Controls Non-secure access of the interrupt with ID525" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS524 ,Controls Non-secure access of the interrupt with ID524" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS523 ,Controls Non-secure access of the interrupt with ID523" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS522 ,Controls Non-secure access of the interrupt with ID522" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS521 ,Controls Non-secure access of the interrupt with ID521" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS520 ,Controls Non-secure access of the interrupt with ID520" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS519 ,Controls Non-secure access of the interrupt with ID519" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS518 ,Controls Non-secure access of the interrupt with ID518" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS517 ,Controls Non-secure access of the interrupt with ID517" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS516 ,Controls Non-secure access of the interrupt with ID516" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS515 ,Controls Non-secure access of the interrupt with ID515" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS514 ,Controls Non-secure access of the interrupt with ID514" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS513 ,Controls Non-secure access of the interrupt with ID513" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS512 ,Controls Non-secure access of the interrupt with ID512" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE80++0x03 hide.long 0x00 "GICD_NSACR32,Non-secure Access Control Register 32" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE84))) group.long 0xE84++0x03 line.long 0x00 "GICD_NSACR33,Non-secure Access Control Register 33" bitfld.long 0x00 30.--31. " NS_ACCESS543 ,Controls Non-secure access of the interrupt with ID543" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS542 ,Controls Non-secure access of the interrupt with ID542" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS541 ,Controls Non-secure access of the interrupt with ID541" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS540 ,Controls Non-secure access of the interrupt with ID540" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS539 ,Controls Non-secure access of the interrupt with ID539" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS538 ,Controls Non-secure access of the interrupt with ID538" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS537 ,Controls Non-secure access of the interrupt with ID537" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS536 ,Controls Non-secure access of the interrupt with ID536" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS535 ,Controls Non-secure access of the interrupt with ID535" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS534 ,Controls Non-secure access of the interrupt with ID534" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS533 ,Controls Non-secure access of the interrupt with ID533" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS532 ,Controls Non-secure access of the interrupt with ID532" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS531 ,Controls Non-secure access of the interrupt with ID531" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS530 ,Controls Non-secure access of the interrupt with ID530" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS529 ,Controls Non-secure access of the interrupt with ID529" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS528 ,Controls Non-secure access of the interrupt with ID528" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE84++0x03 hide.long 0x00 "GICD_NSACR33,Non-secure Access Control Register 33" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE88))) group.long 0xE88++0x03 line.long 0x00 "GICD_NSACR34,Non-secure Access Control Register 34" bitfld.long 0x00 30.--31. " NS_ACCESS559 ,Controls Non-secure access of the interrupt with ID559" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS558 ,Controls Non-secure access of the interrupt with ID558" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS557 ,Controls Non-secure access of the interrupt with ID557" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS556 ,Controls Non-secure access of the interrupt with ID556" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS555 ,Controls Non-secure access of the interrupt with ID555" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS554 ,Controls Non-secure access of the interrupt with ID554" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS553 ,Controls Non-secure access of the interrupt with ID553" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS552 ,Controls Non-secure access of the interrupt with ID552" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS551 ,Controls Non-secure access of the interrupt with ID551" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS550 ,Controls Non-secure access of the interrupt with ID550" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS549 ,Controls Non-secure access of the interrupt with ID549" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS548 ,Controls Non-secure access of the interrupt with ID548" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS547 ,Controls Non-secure access of the interrupt with ID547" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS546 ,Controls Non-secure access of the interrupt with ID546" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS545 ,Controls Non-secure access of the interrupt with ID545" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS544 ,Controls Non-secure access of the interrupt with ID544" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE88++0x03 hide.long 0x00 "GICD_NSACR34,Non-secure Access Control Register 34" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE8C))) group.long 0xE8C++0x03 line.long 0x00 "GICD_NSACR35,Non-secure Access Control Register 35" bitfld.long 0x00 30.--31. " NS_ACCESS575 ,Controls Non-secure access of the interrupt with ID575" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS574 ,Controls Non-secure access of the interrupt with ID574" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS573 ,Controls Non-secure access of the interrupt with ID573" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS572 ,Controls Non-secure access of the interrupt with ID572" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS571 ,Controls Non-secure access of the interrupt with ID571" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS570 ,Controls Non-secure access of the interrupt with ID570" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS569 ,Controls Non-secure access of the interrupt with ID569" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS568 ,Controls Non-secure access of the interrupt with ID568" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS567 ,Controls Non-secure access of the interrupt with ID567" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS566 ,Controls Non-secure access of the interrupt with ID566" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS565 ,Controls Non-secure access of the interrupt with ID565" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS564 ,Controls Non-secure access of the interrupt with ID564" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS563 ,Controls Non-secure access of the interrupt with ID563" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS562 ,Controls Non-secure access of the interrupt with ID562" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS561 ,Controls Non-secure access of the interrupt with ID561" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS560 ,Controls Non-secure access of the interrupt with ID560" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE8C++0x03 hide.long 0x00 "GICD_NSACR35,Non-secure Access Control Register 35" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE90))) group.long 0xE90++0x03 line.long 0x00 "GICD_NSACR36,Non-secure Access Control Register 36" bitfld.long 0x00 30.--31. " NS_ACCESS591 ,Controls Non-secure access of the interrupt with ID591" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS590 ,Controls Non-secure access of the interrupt with ID590" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS589 ,Controls Non-secure access of the interrupt with ID589" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS588 ,Controls Non-secure access of the interrupt with ID588" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS587 ,Controls Non-secure access of the interrupt with ID587" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS586 ,Controls Non-secure access of the interrupt with ID586" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS585 ,Controls Non-secure access of the interrupt with ID585" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS584 ,Controls Non-secure access of the interrupt with ID584" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS583 ,Controls Non-secure access of the interrupt with ID583" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS582 ,Controls Non-secure access of the interrupt with ID582" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS581 ,Controls Non-secure access of the interrupt with ID581" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS580 ,Controls Non-secure access of the interrupt with ID580" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS579 ,Controls Non-secure access of the interrupt with ID579" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS578 ,Controls Non-secure access of the interrupt with ID578" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS577 ,Controls Non-secure access of the interrupt with ID577" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS576 ,Controls Non-secure access of the interrupt with ID576" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE90++0x03 hide.long 0x00 "GICD_NSACR36,Non-secure Access Control Register 36" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE94))) group.long 0xE94++0x03 line.long 0x00 "GICD_NSACR37,Non-secure Access Control Register 37" bitfld.long 0x00 30.--31. " NS_ACCESS607 ,Controls Non-secure access of the interrupt with ID607" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS606 ,Controls Non-secure access of the interrupt with ID606" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS605 ,Controls Non-secure access of the interrupt with ID605" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS604 ,Controls Non-secure access of the interrupt with ID604" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS603 ,Controls Non-secure access of the interrupt with ID603" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS602 ,Controls Non-secure access of the interrupt with ID602" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS601 ,Controls Non-secure access of the interrupt with ID601" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS600 ,Controls Non-secure access of the interrupt with ID600" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS599 ,Controls Non-secure access of the interrupt with ID599" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS598 ,Controls Non-secure access of the interrupt with ID598" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS597 ,Controls Non-secure access of the interrupt with ID597" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS596 ,Controls Non-secure access of the interrupt with ID596" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS595 ,Controls Non-secure access of the interrupt with ID595" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS594 ,Controls Non-secure access of the interrupt with ID594" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS593 ,Controls Non-secure access of the interrupt with ID593" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS592 ,Controls Non-secure access of the interrupt with ID592" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE94++0x03 hide.long 0x00 "GICD_NSACR37,Non-secure Access Control Register 37" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE98))) group.long 0xE98++0x03 line.long 0x00 "GICD_NSACR38,Non-secure Access Control Register 38" bitfld.long 0x00 30.--31. " NS_ACCESS623 ,Controls Non-secure access of the interrupt with ID623" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS622 ,Controls Non-secure access of the interrupt with ID622" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS621 ,Controls Non-secure access of the interrupt with ID621" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS620 ,Controls Non-secure access of the interrupt with ID620" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS619 ,Controls Non-secure access of the interrupt with ID619" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS618 ,Controls Non-secure access of the interrupt with ID618" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS617 ,Controls Non-secure access of the interrupt with ID617" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS616 ,Controls Non-secure access of the interrupt with ID616" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS615 ,Controls Non-secure access of the interrupt with ID615" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS614 ,Controls Non-secure access of the interrupt with ID614" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS613 ,Controls Non-secure access of the interrupt with ID613" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS612 ,Controls Non-secure access of the interrupt with ID612" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS611 ,Controls Non-secure access of the interrupt with ID611" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS610 ,Controls Non-secure access of the interrupt with ID610" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS609 ,Controls Non-secure access of the interrupt with ID609" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS608 ,Controls Non-secure access of the interrupt with ID608" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE98++0x03 hide.long 0x00 "GICD_NSACR38,Non-secure Access Control Register 38" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE9C))) group.long 0xE9C++0x03 line.long 0x00 "GICD_NSACR39,Non-secure Access Control Register 39" bitfld.long 0x00 30.--31. " NS_ACCESS639 ,Controls Non-secure access of the interrupt with ID639" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS638 ,Controls Non-secure access of the interrupt with ID638" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS637 ,Controls Non-secure access of the interrupt with ID637" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS636 ,Controls Non-secure access of the interrupt with ID636" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS635 ,Controls Non-secure access of the interrupt with ID635" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS634 ,Controls Non-secure access of the interrupt with ID634" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS633 ,Controls Non-secure access of the interrupt with ID633" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS632 ,Controls Non-secure access of the interrupt with ID632" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS631 ,Controls Non-secure access of the interrupt with ID631" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS630 ,Controls Non-secure access of the interrupt with ID630" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS629 ,Controls Non-secure access of the interrupt with ID629" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS628 ,Controls Non-secure access of the interrupt with ID628" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS627 ,Controls Non-secure access of the interrupt with ID627" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS626 ,Controls Non-secure access of the interrupt with ID626" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS625 ,Controls Non-secure access of the interrupt with ID625" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS624 ,Controls Non-secure access of the interrupt with ID624" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xE9C++0x03 hide.long 0x00 "GICD_NSACR39,Non-secure Access Control Register 39" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEA0))) group.long 0xEA0++0x03 line.long 0x00 "GICD_NSACR40,Non-secure Access Control Register 40" bitfld.long 0x00 30.--31. " NS_ACCESS655 ,Controls Non-secure access of the interrupt with ID655" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS654 ,Controls Non-secure access of the interrupt with ID654" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS653 ,Controls Non-secure access of the interrupt with ID653" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS652 ,Controls Non-secure access of the interrupt with ID652" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS651 ,Controls Non-secure access of the interrupt with ID651" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS650 ,Controls Non-secure access of the interrupt with ID650" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS649 ,Controls Non-secure access of the interrupt with ID649" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS648 ,Controls Non-secure access of the interrupt with ID648" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS647 ,Controls Non-secure access of the interrupt with ID647" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS646 ,Controls Non-secure access of the interrupt with ID646" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS645 ,Controls Non-secure access of the interrupt with ID645" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS644 ,Controls Non-secure access of the interrupt with ID644" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS643 ,Controls Non-secure access of the interrupt with ID643" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS642 ,Controls Non-secure access of the interrupt with ID642" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS641 ,Controls Non-secure access of the interrupt with ID641" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS640 ,Controls Non-secure access of the interrupt with ID640" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEA0++0x03 hide.long 0x00 "GICD_NSACR40,Non-secure Access Control Register 40" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEA4))) group.long 0xEA4++0x03 line.long 0x00 "GICD_NSACR41,Non-secure Access Control Register 41" bitfld.long 0x00 30.--31. " NS_ACCESS671 ,Controls Non-secure access of the interrupt with ID671" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS670 ,Controls Non-secure access of the interrupt with ID670" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS669 ,Controls Non-secure access of the interrupt with ID669" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS668 ,Controls Non-secure access of the interrupt with ID668" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS667 ,Controls Non-secure access of the interrupt with ID667" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS666 ,Controls Non-secure access of the interrupt with ID666" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS665 ,Controls Non-secure access of the interrupt with ID665" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS664 ,Controls Non-secure access of the interrupt with ID664" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS663 ,Controls Non-secure access of the interrupt with ID663" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS662 ,Controls Non-secure access of the interrupt with ID662" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS661 ,Controls Non-secure access of the interrupt with ID661" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS660 ,Controls Non-secure access of the interrupt with ID660" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS659 ,Controls Non-secure access of the interrupt with ID659" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS658 ,Controls Non-secure access of the interrupt with ID658" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS657 ,Controls Non-secure access of the interrupt with ID657" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS656 ,Controls Non-secure access of the interrupt with ID656" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEA4++0x03 hide.long 0x00 "GICD_NSACR41,Non-secure Access Control Register 41" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEA8))) group.long 0xEA8++0x03 line.long 0x00 "GICD_NSACR42,Non-secure Access Control Register 42" bitfld.long 0x00 30.--31. " NS_ACCESS687 ,Controls Non-secure access of the interrupt with ID687" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS686 ,Controls Non-secure access of the interrupt with ID686" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS685 ,Controls Non-secure access of the interrupt with ID685" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS684 ,Controls Non-secure access of the interrupt with ID684" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS683 ,Controls Non-secure access of the interrupt with ID683" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS682 ,Controls Non-secure access of the interrupt with ID682" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS681 ,Controls Non-secure access of the interrupt with ID681" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS680 ,Controls Non-secure access of the interrupt with ID680" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS679 ,Controls Non-secure access of the interrupt with ID679" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS678 ,Controls Non-secure access of the interrupt with ID678" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS677 ,Controls Non-secure access of the interrupt with ID677" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS676 ,Controls Non-secure access of the interrupt with ID676" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS675 ,Controls Non-secure access of the interrupt with ID675" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS674 ,Controls Non-secure access of the interrupt with ID674" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS673 ,Controls Non-secure access of the interrupt with ID673" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS672 ,Controls Non-secure access of the interrupt with ID672" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEA8++0x03 hide.long 0x00 "GICD_NSACR42,Non-secure Access Control Register 42" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEAC))) group.long 0xEAC++0x03 line.long 0x00 "GICD_NSACR43,Non-secure Access Control Register 43" bitfld.long 0x00 30.--31. " NS_ACCESS703 ,Controls Non-secure access of the interrupt with ID703" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS702 ,Controls Non-secure access of the interrupt with ID702" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS701 ,Controls Non-secure access of the interrupt with ID701" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS700 ,Controls Non-secure access of the interrupt with ID700" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS699 ,Controls Non-secure access of the interrupt with ID699" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS698 ,Controls Non-secure access of the interrupt with ID698" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS697 ,Controls Non-secure access of the interrupt with ID697" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS696 ,Controls Non-secure access of the interrupt with ID696" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS695 ,Controls Non-secure access of the interrupt with ID695" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS694 ,Controls Non-secure access of the interrupt with ID694" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS693 ,Controls Non-secure access of the interrupt with ID693" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS692 ,Controls Non-secure access of the interrupt with ID692" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS691 ,Controls Non-secure access of the interrupt with ID691" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS690 ,Controls Non-secure access of the interrupt with ID690" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS689 ,Controls Non-secure access of the interrupt with ID689" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS688 ,Controls Non-secure access of the interrupt with ID688" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEAC++0x03 hide.long 0x00 "GICD_NSACR43,Non-secure Access Control Register 43" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEB0))) group.long 0xEB0++0x03 line.long 0x00 "GICD_NSACR44,Non-secure Access Control Register 44" bitfld.long 0x00 30.--31. " NS_ACCESS719 ,Controls Non-secure access of the interrupt with ID719" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS718 ,Controls Non-secure access of the interrupt with ID718" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS717 ,Controls Non-secure access of the interrupt with ID717" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS716 ,Controls Non-secure access of the interrupt with ID716" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS715 ,Controls Non-secure access of the interrupt with ID715" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS714 ,Controls Non-secure access of the interrupt with ID714" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS713 ,Controls Non-secure access of the interrupt with ID713" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS712 ,Controls Non-secure access of the interrupt with ID712" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS711 ,Controls Non-secure access of the interrupt with ID711" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS710 ,Controls Non-secure access of the interrupt with ID710" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS709 ,Controls Non-secure access of the interrupt with ID709" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS708 ,Controls Non-secure access of the interrupt with ID708" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS707 ,Controls Non-secure access of the interrupt with ID707" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS706 ,Controls Non-secure access of the interrupt with ID706" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS705 ,Controls Non-secure access of the interrupt with ID705" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS704 ,Controls Non-secure access of the interrupt with ID704" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEB0++0x03 hide.long 0x00 "GICD_NSACR44,Non-secure Access Control Register 44" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEB4))) group.long 0xEB4++0x03 line.long 0x00 "GICD_NSACR45,Non-secure Access Control Register 45" bitfld.long 0x00 30.--31. " NS_ACCESS735 ,Controls Non-secure access of the interrupt with ID735" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS734 ,Controls Non-secure access of the interrupt with ID734" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS733 ,Controls Non-secure access of the interrupt with ID733" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS732 ,Controls Non-secure access of the interrupt with ID732" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS731 ,Controls Non-secure access of the interrupt with ID731" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS730 ,Controls Non-secure access of the interrupt with ID730" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS729 ,Controls Non-secure access of the interrupt with ID729" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS728 ,Controls Non-secure access of the interrupt with ID728" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS727 ,Controls Non-secure access of the interrupt with ID727" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS726 ,Controls Non-secure access of the interrupt with ID726" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS725 ,Controls Non-secure access of the interrupt with ID725" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS724 ,Controls Non-secure access of the interrupt with ID724" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS723 ,Controls Non-secure access of the interrupt with ID723" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS722 ,Controls Non-secure access of the interrupt with ID722" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS721 ,Controls Non-secure access of the interrupt with ID721" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS720 ,Controls Non-secure access of the interrupt with ID720" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEB4++0x03 hide.long 0x00 "GICD_NSACR45,Non-secure Access Control Register 45" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEB8))) group.long 0xEB8++0x03 line.long 0x00 "GICD_NSACR46,Non-secure Access Control Register 46" bitfld.long 0x00 30.--31. " NS_ACCESS751 ,Controls Non-secure access of the interrupt with ID751" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS750 ,Controls Non-secure access of the interrupt with ID750" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS749 ,Controls Non-secure access of the interrupt with ID749" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS748 ,Controls Non-secure access of the interrupt with ID748" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS747 ,Controls Non-secure access of the interrupt with ID747" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS746 ,Controls Non-secure access of the interrupt with ID746" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS745 ,Controls Non-secure access of the interrupt with ID745" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS744 ,Controls Non-secure access of the interrupt with ID744" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS743 ,Controls Non-secure access of the interrupt with ID743" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS742 ,Controls Non-secure access of the interrupt with ID742" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS741 ,Controls Non-secure access of the interrupt with ID741" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS740 ,Controls Non-secure access of the interrupt with ID740" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS739 ,Controls Non-secure access of the interrupt with ID739" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS738 ,Controls Non-secure access of the interrupt with ID738" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS737 ,Controls Non-secure access of the interrupt with ID737" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS736 ,Controls Non-secure access of the interrupt with ID736" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEB8++0x03 hide.long 0x00 "GICD_NSACR46,Non-secure Access Control Register 46" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEBC))) group.long 0xEBC++0x03 line.long 0x00 "GICD_NSACR47,Non-secure Access Control Register 47" bitfld.long 0x00 30.--31. " NS_ACCESS767 ,Controls Non-secure access of the interrupt with ID767" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS766 ,Controls Non-secure access of the interrupt with ID766" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS765 ,Controls Non-secure access of the interrupt with ID765" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS764 ,Controls Non-secure access of the interrupt with ID764" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS763 ,Controls Non-secure access of the interrupt with ID763" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS762 ,Controls Non-secure access of the interrupt with ID762" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS761 ,Controls Non-secure access of the interrupt with ID761" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS760 ,Controls Non-secure access of the interrupt with ID760" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS759 ,Controls Non-secure access of the interrupt with ID759" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS758 ,Controls Non-secure access of the interrupt with ID758" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS757 ,Controls Non-secure access of the interrupt with ID757" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS756 ,Controls Non-secure access of the interrupt with ID756" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS755 ,Controls Non-secure access of the interrupt with ID755" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS754 ,Controls Non-secure access of the interrupt with ID754" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS753 ,Controls Non-secure access of the interrupt with ID753" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS752 ,Controls Non-secure access of the interrupt with ID752" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEBC++0x03 hide.long 0x00 "GICD_NSACR47,Non-secure Access Control Register 47" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC0))) group.long 0xEC0++0x03 line.long 0x00 "GICD_NSACR48,Non-secure Access Control Register 48" bitfld.long 0x00 30.--31. " NS_ACCESS783 ,Controls Non-secure access of the interrupt with ID783" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS782 ,Controls Non-secure access of the interrupt with ID782" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS781 ,Controls Non-secure access of the interrupt with ID781" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS780 ,Controls Non-secure access of the interrupt with ID780" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS779 ,Controls Non-secure access of the interrupt with ID779" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS778 ,Controls Non-secure access of the interrupt with ID778" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS777 ,Controls Non-secure access of the interrupt with ID777" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS776 ,Controls Non-secure access of the interrupt with ID776" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS775 ,Controls Non-secure access of the interrupt with ID775" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS774 ,Controls Non-secure access of the interrupt with ID774" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS773 ,Controls Non-secure access of the interrupt with ID773" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS772 ,Controls Non-secure access of the interrupt with ID772" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS771 ,Controls Non-secure access of the interrupt with ID771" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS770 ,Controls Non-secure access of the interrupt with ID770" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS769 ,Controls Non-secure access of the interrupt with ID769" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS768 ,Controls Non-secure access of the interrupt with ID768" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEC0++0x03 hide.long 0x00 "GICD_NSACR48,Non-secure Access Control Register 48" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC4))) group.long 0xEC4++0x03 line.long 0x00 "GICD_NSACR49,Non-secure Access Control Register 49" bitfld.long 0x00 30.--31. " NS_ACCESS799 ,Controls Non-secure access of the interrupt with ID799" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS798 ,Controls Non-secure access of the interrupt with ID798" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS797 ,Controls Non-secure access of the interrupt with ID797" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS796 ,Controls Non-secure access of the interrupt with ID796" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS795 ,Controls Non-secure access of the interrupt with ID795" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS794 ,Controls Non-secure access of the interrupt with ID794" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS793 ,Controls Non-secure access of the interrupt with ID793" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS792 ,Controls Non-secure access of the interrupt with ID792" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS791 ,Controls Non-secure access of the interrupt with ID791" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS790 ,Controls Non-secure access of the interrupt with ID790" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS789 ,Controls Non-secure access of the interrupt with ID789" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS788 ,Controls Non-secure access of the interrupt with ID788" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS787 ,Controls Non-secure access of the interrupt with ID787" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS786 ,Controls Non-secure access of the interrupt with ID786" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS785 ,Controls Non-secure access of the interrupt with ID785" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS784 ,Controls Non-secure access of the interrupt with ID784" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEC4++0x03 hide.long 0x00 "GICD_NSACR49,Non-secure Access Control Register 49" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC8))) group.long 0xEC8++0x03 line.long 0x00 "GICD_NSACR50,Non-secure Access Control Register 50" bitfld.long 0x00 30.--31. " NS_ACCESS815 ,Controls Non-secure access of the interrupt with ID815" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS814 ,Controls Non-secure access of the interrupt with ID814" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS813 ,Controls Non-secure access of the interrupt with ID813" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS812 ,Controls Non-secure access of the interrupt with ID812" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS811 ,Controls Non-secure access of the interrupt with ID811" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS810 ,Controls Non-secure access of the interrupt with ID810" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS809 ,Controls Non-secure access of the interrupt with ID809" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS808 ,Controls Non-secure access of the interrupt with ID808" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS807 ,Controls Non-secure access of the interrupt with ID807" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS806 ,Controls Non-secure access of the interrupt with ID806" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS805 ,Controls Non-secure access of the interrupt with ID805" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS804 ,Controls Non-secure access of the interrupt with ID804" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS803 ,Controls Non-secure access of the interrupt with ID803" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS802 ,Controls Non-secure access of the interrupt with ID802" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS801 ,Controls Non-secure access of the interrupt with ID801" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS800 ,Controls Non-secure access of the interrupt with ID800" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEC8++0x03 hide.long 0x00 "GICD_NSACR50,Non-secure Access Control Register 50" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xECC))) group.long 0xECC++0x03 line.long 0x00 "GICD_NSACR51,Non-secure Access Control Register 51" bitfld.long 0x00 30.--31. " NS_ACCESS831 ,Controls Non-secure access of the interrupt with ID831" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS830 ,Controls Non-secure access of the interrupt with ID830" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS829 ,Controls Non-secure access of the interrupt with ID829" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS828 ,Controls Non-secure access of the interrupt with ID828" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS827 ,Controls Non-secure access of the interrupt with ID827" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS826 ,Controls Non-secure access of the interrupt with ID826" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS825 ,Controls Non-secure access of the interrupt with ID825" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS824 ,Controls Non-secure access of the interrupt with ID824" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS823 ,Controls Non-secure access of the interrupt with ID823" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS822 ,Controls Non-secure access of the interrupt with ID822" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS821 ,Controls Non-secure access of the interrupt with ID821" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS820 ,Controls Non-secure access of the interrupt with ID820" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS819 ,Controls Non-secure access of the interrupt with ID819" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS818 ,Controls Non-secure access of the interrupt with ID818" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS817 ,Controls Non-secure access of the interrupt with ID817" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS816 ,Controls Non-secure access of the interrupt with ID816" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xECC++0x03 hide.long 0x00 "GICD_NSACR51,Non-secure Access Control Register 51" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xED0))) group.long 0xED0++0x03 line.long 0x00 "GICD_NSACR52,Non-secure Access Control Register 52" bitfld.long 0x00 30.--31. " NS_ACCESS847 ,Controls Non-secure access of the interrupt with ID847" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS846 ,Controls Non-secure access of the interrupt with ID846" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS845 ,Controls Non-secure access of the interrupt with ID845" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS844 ,Controls Non-secure access of the interrupt with ID844" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS843 ,Controls Non-secure access of the interrupt with ID843" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS842 ,Controls Non-secure access of the interrupt with ID842" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS841 ,Controls Non-secure access of the interrupt with ID841" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS840 ,Controls Non-secure access of the interrupt with ID840" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS839 ,Controls Non-secure access of the interrupt with ID839" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS838 ,Controls Non-secure access of the interrupt with ID838" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS837 ,Controls Non-secure access of the interrupt with ID837" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS836 ,Controls Non-secure access of the interrupt with ID836" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS835 ,Controls Non-secure access of the interrupt with ID835" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS834 ,Controls Non-secure access of the interrupt with ID834" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS833 ,Controls Non-secure access of the interrupt with ID833" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS832 ,Controls Non-secure access of the interrupt with ID832" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xED0++0x03 hide.long 0x00 "GICD_NSACR52,Non-secure Access Control Register 52" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xED4))) group.long 0xED4++0x03 line.long 0x00 "GICD_NSACR53,Non-secure Access Control Register 53" bitfld.long 0x00 30.--31. " NS_ACCESS863 ,Controls Non-secure access of the interrupt with ID863" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS862 ,Controls Non-secure access of the interrupt with ID862" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS861 ,Controls Non-secure access of the interrupt with ID861" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS860 ,Controls Non-secure access of the interrupt with ID860" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS859 ,Controls Non-secure access of the interrupt with ID859" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS858 ,Controls Non-secure access of the interrupt with ID858" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS857 ,Controls Non-secure access of the interrupt with ID857" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS856 ,Controls Non-secure access of the interrupt with ID856" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS855 ,Controls Non-secure access of the interrupt with ID855" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS854 ,Controls Non-secure access of the interrupt with ID854" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS853 ,Controls Non-secure access of the interrupt with ID853" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS852 ,Controls Non-secure access of the interrupt with ID852" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS851 ,Controls Non-secure access of the interrupt with ID851" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS850 ,Controls Non-secure access of the interrupt with ID850" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS849 ,Controls Non-secure access of the interrupt with ID849" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS848 ,Controls Non-secure access of the interrupt with ID848" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xED4++0x03 hide.long 0x00 "GICD_NSACR53,Non-secure Access Control Register 53" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xED8))) group.long 0xED8++0x03 line.long 0x00 "GICD_NSACR54,Non-secure Access Control Register 54" bitfld.long 0x00 30.--31. " NS_ACCESS879 ,Controls Non-secure access of the interrupt with ID879" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS878 ,Controls Non-secure access of the interrupt with ID878" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS877 ,Controls Non-secure access of the interrupt with ID877" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS876 ,Controls Non-secure access of the interrupt with ID876" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS875 ,Controls Non-secure access of the interrupt with ID875" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS874 ,Controls Non-secure access of the interrupt with ID874" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS873 ,Controls Non-secure access of the interrupt with ID873" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS872 ,Controls Non-secure access of the interrupt with ID872" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS871 ,Controls Non-secure access of the interrupt with ID871" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS870 ,Controls Non-secure access of the interrupt with ID870" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS869 ,Controls Non-secure access of the interrupt with ID869" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS868 ,Controls Non-secure access of the interrupt with ID868" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS867 ,Controls Non-secure access of the interrupt with ID867" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS866 ,Controls Non-secure access of the interrupt with ID866" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS865 ,Controls Non-secure access of the interrupt with ID865" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS864 ,Controls Non-secure access of the interrupt with ID864" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xED8++0x03 hide.long 0x00 "GICD_NSACR54,Non-secure Access Control Register 54" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEDC))) group.long 0xEDC++0x03 line.long 0x00 "GICD_NSACR55,Non-secure Access Control Register 55" bitfld.long 0x00 30.--31. " NS_ACCESS895 ,Controls Non-secure access of the interrupt with ID895" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS894 ,Controls Non-secure access of the interrupt with ID894" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS893 ,Controls Non-secure access of the interrupt with ID893" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS892 ,Controls Non-secure access of the interrupt with ID892" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS891 ,Controls Non-secure access of the interrupt with ID891" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS890 ,Controls Non-secure access of the interrupt with ID890" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS889 ,Controls Non-secure access of the interrupt with ID889" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS888 ,Controls Non-secure access of the interrupt with ID888" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS887 ,Controls Non-secure access of the interrupt with ID887" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS886 ,Controls Non-secure access of the interrupt with ID886" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS885 ,Controls Non-secure access of the interrupt with ID885" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS884 ,Controls Non-secure access of the interrupt with ID884" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS883 ,Controls Non-secure access of the interrupt with ID883" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS882 ,Controls Non-secure access of the interrupt with ID882" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS881 ,Controls Non-secure access of the interrupt with ID881" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS880 ,Controls Non-secure access of the interrupt with ID880" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEDC++0x03 hide.long 0x00 "GICD_NSACR55,Non-secure Access Control Register 55" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEE0))) group.long 0xEE0++0x03 line.long 0x00 "GICD_NSACR56,Non-secure Access Control Register 56" bitfld.long 0x00 30.--31. " NS_ACCESS911 ,Controls Non-secure access of the interrupt with ID911" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS910 ,Controls Non-secure access of the interrupt with ID910" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS909 ,Controls Non-secure access of the interrupt with ID909" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS908 ,Controls Non-secure access of the interrupt with ID908" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS907 ,Controls Non-secure access of the interrupt with ID907" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS906 ,Controls Non-secure access of the interrupt with ID906" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS905 ,Controls Non-secure access of the interrupt with ID905" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS904 ,Controls Non-secure access of the interrupt with ID904" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS903 ,Controls Non-secure access of the interrupt with ID903" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS902 ,Controls Non-secure access of the interrupt with ID902" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS901 ,Controls Non-secure access of the interrupt with ID901" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS900 ,Controls Non-secure access of the interrupt with ID900" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS899 ,Controls Non-secure access of the interrupt with ID899" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS898 ,Controls Non-secure access of the interrupt with ID898" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS897 ,Controls Non-secure access of the interrupt with ID897" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS896 ,Controls Non-secure access of the interrupt with ID896" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEE0++0x03 hide.long 0x00 "GICD_NSACR56,Non-secure Access Control Register 56" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEE4))) group.long 0xEE4++0x03 line.long 0x00 "GICD_NSACR57,Non-secure Access Control Register 57" bitfld.long 0x00 30.--31. " NS_ACCESS927 ,Controls Non-secure access of the interrupt with ID927" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS926 ,Controls Non-secure access of the interrupt with ID926" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS925 ,Controls Non-secure access of the interrupt with ID925" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS924 ,Controls Non-secure access of the interrupt with ID924" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS923 ,Controls Non-secure access of the interrupt with ID923" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS922 ,Controls Non-secure access of the interrupt with ID922" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS921 ,Controls Non-secure access of the interrupt with ID921" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS920 ,Controls Non-secure access of the interrupt with ID920" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS919 ,Controls Non-secure access of the interrupt with ID919" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS918 ,Controls Non-secure access of the interrupt with ID918" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS917 ,Controls Non-secure access of the interrupt with ID917" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS916 ,Controls Non-secure access of the interrupt with ID916" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS915 ,Controls Non-secure access of the interrupt with ID915" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS914 ,Controls Non-secure access of the interrupt with ID914" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS913 ,Controls Non-secure access of the interrupt with ID913" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS912 ,Controls Non-secure access of the interrupt with ID912" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEE4++0x03 hide.long 0x00 "GICD_NSACR57,Non-secure Access Control Register 57" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEE8))) group.long 0xEE8++0x03 line.long 0x00 "GICD_NSACR58,Non-secure Access Control Register 58" bitfld.long 0x00 30.--31. " NS_ACCESS943 ,Controls Non-secure access of the interrupt with ID943" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS942 ,Controls Non-secure access of the interrupt with ID942" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS941 ,Controls Non-secure access of the interrupt with ID941" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS940 ,Controls Non-secure access of the interrupt with ID940" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS939 ,Controls Non-secure access of the interrupt with ID939" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS938 ,Controls Non-secure access of the interrupt with ID938" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS937 ,Controls Non-secure access of the interrupt with ID937" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS936 ,Controls Non-secure access of the interrupt with ID936" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS935 ,Controls Non-secure access of the interrupt with ID935" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS934 ,Controls Non-secure access of the interrupt with ID934" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS933 ,Controls Non-secure access of the interrupt with ID933" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS932 ,Controls Non-secure access of the interrupt with ID932" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS931 ,Controls Non-secure access of the interrupt with ID931" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS930 ,Controls Non-secure access of the interrupt with ID930" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS929 ,Controls Non-secure access of the interrupt with ID929" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS928 ,Controls Non-secure access of the interrupt with ID928" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEE8++0x03 hide.long 0x00 "GICD_NSACR58,Non-secure Access Control Register 58" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEEC))) group.long 0xEEC++0x03 line.long 0x00 "GICD_NSACR59,Non-secure Access Control Register 59" bitfld.long 0x00 30.--31. " NS_ACCESS959 ,Controls Non-secure access of the interrupt with ID959" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS958 ,Controls Non-secure access of the interrupt with ID958" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS957 ,Controls Non-secure access of the interrupt with ID957" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS956 ,Controls Non-secure access of the interrupt with ID956" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS955 ,Controls Non-secure access of the interrupt with ID955" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS954 ,Controls Non-secure access of the interrupt with ID954" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS953 ,Controls Non-secure access of the interrupt with ID953" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS952 ,Controls Non-secure access of the interrupt with ID952" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS951 ,Controls Non-secure access of the interrupt with ID951" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS950 ,Controls Non-secure access of the interrupt with ID950" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS949 ,Controls Non-secure access of the interrupt with ID949" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS948 ,Controls Non-secure access of the interrupt with ID948" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS947 ,Controls Non-secure access of the interrupt with ID947" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS946 ,Controls Non-secure access of the interrupt with ID946" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS945 ,Controls Non-secure access of the interrupt with ID945" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS944 ,Controls Non-secure access of the interrupt with ID944" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEEC++0x03 hide.long 0x00 "GICD_NSACR59,Non-secure Access Control Register 59" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEF0))) group.long 0xEF0++0x03 line.long 0x00 "GICD_NSACR60,Non-secure Access Control Register 60" bitfld.long 0x00 30.--31. " NS_ACCESS975 ,Controls Non-secure access of the interrupt with ID975" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS974 ,Controls Non-secure access of the interrupt with ID974" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS973 ,Controls Non-secure access of the interrupt with ID973" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS972 ,Controls Non-secure access of the interrupt with ID972" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS971 ,Controls Non-secure access of the interrupt with ID971" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS970 ,Controls Non-secure access of the interrupt with ID970" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS969 ,Controls Non-secure access of the interrupt with ID969" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS968 ,Controls Non-secure access of the interrupt with ID968" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS967 ,Controls Non-secure access of the interrupt with ID967" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS966 ,Controls Non-secure access of the interrupt with ID966" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS965 ,Controls Non-secure access of the interrupt with ID965" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS964 ,Controls Non-secure access of the interrupt with ID964" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS963 ,Controls Non-secure access of the interrupt with ID963" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS962 ,Controls Non-secure access of the interrupt with ID962" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS961 ,Controls Non-secure access of the interrupt with ID961" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS960 ,Controls Non-secure access of the interrupt with ID960" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEF0++0x03 hide.long 0x00 "GICD_NSACR60,Non-secure Access Control Register 60" endif if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEF4))) group.long 0xEF4++0x03 line.long 0x00 "GICD_NSACR61,Non-secure Access Control Register 61" bitfld.long 0x00 30.--31. " NS_ACCESS991 ,Controls Non-secure access of the interrupt with ID991" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 28.--29. " NS_ACCESS990 ,Controls Non-secure access of the interrupt with ID990" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 26.--27. " NS_ACCESS989 ,Controls Non-secure access of the interrupt with ID989" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 24.--25. " NS_ACCESS988 ,Controls Non-secure access of the interrupt with ID988" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 22.--23. " NS_ACCESS987 ,Controls Non-secure access of the interrupt with ID987" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 20.--21. " NS_ACCESS986 ,Controls Non-secure access of the interrupt with ID986" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 18.--19. " NS_ACCESS985 ,Controls Non-secure access of the interrupt with ID985" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 16.--17. " NS_ACCESS984 ,Controls Non-secure access of the interrupt with ID984" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 14.--15. " NS_ACCESS983 ,Controls Non-secure access of the interrupt with ID983" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 12.--13. " NS_ACCESS982 ,Controls Non-secure access of the interrupt with ID982" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 10.--11. " NS_ACCESS981 ,Controls Non-secure access of the interrupt with ID981" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 8.--9. " NS_ACCESS980 ,Controls Non-secure access of the interrupt with ID980" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 6.--7. " NS_ACCESS979 ,Controls Non-secure access of the interrupt with ID979" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 4.--5. " NS_ACCESS978 ,Controls Non-secure access of the interrupt with ID978" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 2.--3. " NS_ACCESS977 ,Controls Non-secure access of the interrupt with ID977" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" textline " " bitfld.long 0x00 0.--1. " NS_ACCESS976 ,Controls Non-secure access of the interrupt with ID976" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER" else hgroup.long 0xEF4++0x03 hide.long 0x00 "GICD_NSACR61,Non-secure Access Control Register 61" endif tree.end width 25. tree "Software Generated Interrupt" if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10) hgroup.long 0x0F00++0x03 hide.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" hgroup.long 0xF10++0x03 hide.long 0x00 "GICD_CLR_PENDSGIR0,SGI Clear Pending Register 0" hgroup.long 0xF14++0x03 hide.long 0x00 "GICD_CLR_PENDSGIR1,SGI Clear Pending Register 1" hgroup.long 0xF18++0x03 hide.long 0x00 "GICD_CLR_PENDSGIR2,SGI Clear Pending Register 2" hgroup.long 0xF1C++0x03 hide.long 0x00 "GICD_CLR_PENDSGIR3,SGI Clear Pending Register 3" hgroup.long 0xF20++0x03 hide.long 0x00 "GICD_SET_PENDSGIR0,SGI Set Pending Register 0" hgroup.long 0xF24++0x03 hide.long 0x00 "GICD_SET_PENDSGIR1,SGI Set Pending Register 1" hgroup.long 0xF28++0x03 hide.long 0x00 "GICD_SET_PENDSGIR2,SGI Set Pending Register 2" hgroup.long 0xF2C++0x03 hide.long 0x00 "GICD_SET_PENDSGIR3,SGI Set Pending Register 3" else wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" group.long 0xF10++0x03 line.long 0x00 "GICD_CLR_PENDSGIR0,SGI Clear Pending Register 0" group.long 0xF14++0x03 line.long 0x00 "GICD_CLR_PENDSGIR1,SGI Clear Pending Register 1" group.long 0xF18++0x03 line.long 0x00 "GICD_CLR_PENDSGIR2,SGI Clear Pending Register 2" group.long 0xF1C++0x03 line.long 0x00 "GICD_CLR_PENDSGIR3,SGI Clear Pending Register 3" group.long 0xF20++0x03 line.long 0x00 "GICD_SET_PENDSGIR0,SGI Set Pending Register 0" group.long 0xF24++0x03 line.long 0x00 "GICD_SET_PENDSGIR1,SGI Set Pending Register 1" group.long 0xF28++0x03 line.long 0x00 "GICD_SET_PENDSGIR2,SGI Set Pending Register 2" group.long 0xF2C++0x03 line.long 0x00 "GICD_SET_PENDSGIR3,SGI Set Pending Register 3" endif tree.end width 24. tree "Interrupt Routing Registers" group.quad 0x6100++0x07 line.quad 0x00 "GICD_IROUTER32 ,Interrupt Routing Register 32 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6108++0x07 line.quad 0x00 "GICD_IROUTER33 ,Interrupt Routing Register 33 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6110++0x07 line.quad 0x00 "GICD_IROUTER34 ,Interrupt Routing Register 34 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6118++0x07 line.quad 0x00 "GICD_IROUTER35 ,Interrupt Routing Register 35 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6120++0x07 line.quad 0x00 "GICD_IROUTER36 ,Interrupt Routing Register 36 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6128++0x07 line.quad 0x00 "GICD_IROUTER37 ,Interrupt Routing Register 37 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6130++0x07 line.quad 0x00 "GICD_IROUTER38 ,Interrupt Routing Register 38 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6138++0x07 line.quad 0x00 "GICD_IROUTER39 ,Interrupt Routing Register 39 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6140++0x07 line.quad 0x00 "GICD_IROUTER40 ,Interrupt Routing Register 40 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6148++0x07 line.quad 0x00 "GICD_IROUTER41 ,Interrupt Routing Register 41 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6150++0x07 line.quad 0x00 "GICD_IROUTER42 ,Interrupt Routing Register 42 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6158++0x07 line.quad 0x00 "GICD_IROUTER43 ,Interrupt Routing Register 43 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6160++0x07 line.quad 0x00 "GICD_IROUTER44 ,Interrupt Routing Register 44 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6168++0x07 line.quad 0x00 "GICD_IROUTER45 ,Interrupt Routing Register 45 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6170++0x07 line.quad 0x00 "GICD_IROUTER46 ,Interrupt Routing Register 46 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6178++0x07 line.quad 0x00 "GICD_IROUTER47 ,Interrupt Routing Register 47 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6180++0x07 line.quad 0x00 "GICD_IROUTER48 ,Interrupt Routing Register 48 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6188++0x07 line.quad 0x00 "GICD_IROUTER49 ,Interrupt Routing Register 49 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6190++0x07 line.quad 0x00 "GICD_IROUTER50 ,Interrupt Routing Register 50 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6198++0x07 line.quad 0x00 "GICD_IROUTER51 ,Interrupt Routing Register 51 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61A0++0x07 line.quad 0x00 "GICD_IROUTER52 ,Interrupt Routing Register 52 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61A8++0x07 line.quad 0x00 "GICD_IROUTER53 ,Interrupt Routing Register 53 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61B0++0x07 line.quad 0x00 "GICD_IROUTER54 ,Interrupt Routing Register 54 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61B8++0x07 line.quad 0x00 "GICD_IROUTER55 ,Interrupt Routing Register 55 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61C0++0x07 line.quad 0x00 "GICD_IROUTER56 ,Interrupt Routing Register 56 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61C8++0x07 line.quad 0x00 "GICD_IROUTER57 ,Interrupt Routing Register 57 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61D0++0x07 line.quad 0x00 "GICD_IROUTER58 ,Interrupt Routing Register 58 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61D8++0x07 line.quad 0x00 "GICD_IROUTER59 ,Interrupt Routing Register 59 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61E0++0x07 line.quad 0x00 "GICD_IROUTER60 ,Interrupt Routing Register 60 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61E8++0x07 line.quad 0x00 "GICD_IROUTER61 ,Interrupt Routing Register 61 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61F0++0x07 line.quad 0x00 "GICD_IROUTER62 ,Interrupt Routing Register 62 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x61F8++0x07 line.quad 0x00 "GICD_IROUTER63 ,Interrupt Routing Register 63 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6200++0x07 line.quad 0x00 "GICD_IROUTER64 ,Interrupt Routing Register 64 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6208++0x07 line.quad 0x00 "GICD_IROUTER65 ,Interrupt Routing Register 65 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6210++0x07 line.quad 0x00 "GICD_IROUTER66 ,Interrupt Routing Register 66 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6218++0x07 line.quad 0x00 "GICD_IROUTER67 ,Interrupt Routing Register 67 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6220++0x07 line.quad 0x00 "GICD_IROUTER68 ,Interrupt Routing Register 68 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6228++0x07 line.quad 0x00 "GICD_IROUTER69 ,Interrupt Routing Register 69 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6230++0x07 line.quad 0x00 "GICD_IROUTER70 ,Interrupt Routing Register 70 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6238++0x07 line.quad 0x00 "GICD_IROUTER71 ,Interrupt Routing Register 71 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6240++0x07 line.quad 0x00 "GICD_IROUTER72 ,Interrupt Routing Register 72 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6248++0x07 line.quad 0x00 "GICD_IROUTER73 ,Interrupt Routing Register 73 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6250++0x07 line.quad 0x00 "GICD_IROUTER74 ,Interrupt Routing Register 74 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6258++0x07 line.quad 0x00 "GICD_IROUTER75 ,Interrupt Routing Register 75 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6260++0x07 line.quad 0x00 "GICD_IROUTER76 ,Interrupt Routing Register 76 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6268++0x07 line.quad 0x00 "GICD_IROUTER77 ,Interrupt Routing Register 77 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6270++0x07 line.quad 0x00 "GICD_IROUTER78 ,Interrupt Routing Register 78 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6278++0x07 line.quad 0x00 "GICD_IROUTER79 ,Interrupt Routing Register 79 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6280++0x07 line.quad 0x00 "GICD_IROUTER80 ,Interrupt Routing Register 80 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6288++0x07 line.quad 0x00 "GICD_IROUTER81 ,Interrupt Routing Register 81 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6290++0x07 line.quad 0x00 "GICD_IROUTER82 ,Interrupt Routing Register 82 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6298++0x07 line.quad 0x00 "GICD_IROUTER83 ,Interrupt Routing Register 83 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62A0++0x07 line.quad 0x00 "GICD_IROUTER84 ,Interrupt Routing Register 84 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62A8++0x07 line.quad 0x00 "GICD_IROUTER85 ,Interrupt Routing Register 85 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62B0++0x07 line.quad 0x00 "GICD_IROUTER86 ,Interrupt Routing Register 86 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62B8++0x07 line.quad 0x00 "GICD_IROUTER87 ,Interrupt Routing Register 87 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62C0++0x07 line.quad 0x00 "GICD_IROUTER88 ,Interrupt Routing Register 88 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62C8++0x07 line.quad 0x00 "GICD_IROUTER89 ,Interrupt Routing Register 89 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62D0++0x07 line.quad 0x00 "GICD_IROUTER90 ,Interrupt Routing Register 90 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62D8++0x07 line.quad 0x00 "GICD_IROUTER91 ,Interrupt Routing Register 91 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62E0++0x07 line.quad 0x00 "GICD_IROUTER92 ,Interrupt Routing Register 92 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62E8++0x07 line.quad 0x00 "GICD_IROUTER93 ,Interrupt Routing Register 93 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62F0++0x07 line.quad 0x00 "GICD_IROUTER94 ,Interrupt Routing Register 94 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x62F8++0x07 line.quad 0x00 "GICD_IROUTER95 ,Interrupt Routing Register 95 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6300++0x07 line.quad 0x00 "GICD_IROUTER96 ,Interrupt Routing Register 96 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6308++0x07 line.quad 0x00 "GICD_IROUTER97 ,Interrupt Routing Register 97 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6310++0x07 line.quad 0x00 "GICD_IROUTER98 ,Interrupt Routing Register 98 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6318++0x07 line.quad 0x00 "GICD_IROUTER99 ,Interrupt Routing Register 99 " hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6320++0x07 line.quad 0x00 "GICD_IROUTER100,Interrupt Routing Register 100" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6328++0x07 line.quad 0x00 "GICD_IROUTER101,Interrupt Routing Register 101" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6330++0x07 line.quad 0x00 "GICD_IROUTER102,Interrupt Routing Register 102" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6338++0x07 line.quad 0x00 "GICD_IROUTER103,Interrupt Routing Register 103" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6340++0x07 line.quad 0x00 "GICD_IROUTER104,Interrupt Routing Register 104" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6348++0x07 line.quad 0x00 "GICD_IROUTER105,Interrupt Routing Register 105" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6350++0x07 line.quad 0x00 "GICD_IROUTER106,Interrupt Routing Register 106" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6358++0x07 line.quad 0x00 "GICD_IROUTER107,Interrupt Routing Register 107" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6360++0x07 line.quad 0x00 "GICD_IROUTER108,Interrupt Routing Register 108" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6368++0x07 line.quad 0x00 "GICD_IROUTER109,Interrupt Routing Register 109" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6370++0x07 line.quad 0x00 "GICD_IROUTER110,Interrupt Routing Register 110" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6378++0x07 line.quad 0x00 "GICD_IROUTER111,Interrupt Routing Register 111" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6380++0x07 line.quad 0x00 "GICD_IROUTER112,Interrupt Routing Register 112" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6388++0x07 line.quad 0x00 "GICD_IROUTER113,Interrupt Routing Register 113" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6390++0x07 line.quad 0x00 "GICD_IROUTER114,Interrupt Routing Register 114" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6398++0x07 line.quad 0x00 "GICD_IROUTER115,Interrupt Routing Register 115" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63A0++0x07 line.quad 0x00 "GICD_IROUTER116,Interrupt Routing Register 116" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63A8++0x07 line.quad 0x00 "GICD_IROUTER117,Interrupt Routing Register 117" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63B0++0x07 line.quad 0x00 "GICD_IROUTER118,Interrupt Routing Register 118" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63B8++0x07 line.quad 0x00 "GICD_IROUTER119,Interrupt Routing Register 119" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63C0++0x07 line.quad 0x00 "GICD_IROUTER120,Interrupt Routing Register 120" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63C8++0x07 line.quad 0x00 "GICD_IROUTER121,Interrupt Routing Register 121" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63D0++0x07 line.quad 0x00 "GICD_IROUTER122,Interrupt Routing Register 122" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63D8++0x07 line.quad 0x00 "GICD_IROUTER123,Interrupt Routing Register 123" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63E0++0x07 line.quad 0x00 "GICD_IROUTER124,Interrupt Routing Register 124" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63E8++0x07 line.quad 0x00 "GICD_IROUTER125,Interrupt Routing Register 125" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63F0++0x07 line.quad 0x00 "GICD_IROUTER126,Interrupt Routing Register 126" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x63F8++0x07 line.quad 0x00 "GICD_IROUTER127,Interrupt Routing Register 127" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6400++0x07 line.quad 0x00 "GICD_IROUTER128,Interrupt Routing Register 128" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6408++0x07 line.quad 0x00 "GICD_IROUTER129,Interrupt Routing Register 129" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6410++0x07 line.quad 0x00 "GICD_IROUTER130,Interrupt Routing Register 130" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6418++0x07 line.quad 0x00 "GICD_IROUTER131,Interrupt Routing Register 131" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6420++0x07 line.quad 0x00 "GICD_IROUTER132,Interrupt Routing Register 132" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6428++0x07 line.quad 0x00 "GICD_IROUTER133,Interrupt Routing Register 133" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6430++0x07 line.quad 0x00 "GICD_IROUTER134,Interrupt Routing Register 134" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6438++0x07 line.quad 0x00 "GICD_IROUTER135,Interrupt Routing Register 135" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6440++0x07 line.quad 0x00 "GICD_IROUTER136,Interrupt Routing Register 136" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6448++0x07 line.quad 0x00 "GICD_IROUTER137,Interrupt Routing Register 137" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6450++0x07 line.quad 0x00 "GICD_IROUTER138,Interrupt Routing Register 138" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6458++0x07 line.quad 0x00 "GICD_IROUTER139,Interrupt Routing Register 139" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6460++0x07 line.quad 0x00 "GICD_IROUTER140,Interrupt Routing Register 140" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6468++0x07 line.quad 0x00 "GICD_IROUTER141,Interrupt Routing Register 141" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6470++0x07 line.quad 0x00 "GICD_IROUTER142,Interrupt Routing Register 142" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6478++0x07 line.quad 0x00 "GICD_IROUTER143,Interrupt Routing Register 143" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6480++0x07 line.quad 0x00 "GICD_IROUTER144,Interrupt Routing Register 144" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6488++0x07 line.quad 0x00 "GICD_IROUTER145,Interrupt Routing Register 145" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6490++0x07 line.quad 0x00 "GICD_IROUTER146,Interrupt Routing Register 146" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6498++0x07 line.quad 0x00 "GICD_IROUTER147,Interrupt Routing Register 147" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64A0++0x07 line.quad 0x00 "GICD_IROUTER148,Interrupt Routing Register 148" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64A8++0x07 line.quad 0x00 "GICD_IROUTER149,Interrupt Routing Register 149" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64B0++0x07 line.quad 0x00 "GICD_IROUTER150,Interrupt Routing Register 150" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64B8++0x07 line.quad 0x00 "GICD_IROUTER151,Interrupt Routing Register 151" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64C0++0x07 line.quad 0x00 "GICD_IROUTER152,Interrupt Routing Register 152" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64C8++0x07 line.quad 0x00 "GICD_IROUTER153,Interrupt Routing Register 153" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64D0++0x07 line.quad 0x00 "GICD_IROUTER154,Interrupt Routing Register 154" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64D8++0x07 line.quad 0x00 "GICD_IROUTER155,Interrupt Routing Register 155" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64E0++0x07 line.quad 0x00 "GICD_IROUTER156,Interrupt Routing Register 156" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64E8++0x07 line.quad 0x00 "GICD_IROUTER157,Interrupt Routing Register 157" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64F0++0x07 line.quad 0x00 "GICD_IROUTER158,Interrupt Routing Register 158" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x64F8++0x07 line.quad 0x00 "GICD_IROUTER159,Interrupt Routing Register 159" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6500++0x07 line.quad 0x00 "GICD_IROUTER160,Interrupt Routing Register 160" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6508++0x07 line.quad 0x00 "GICD_IROUTER161,Interrupt Routing Register 161" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6510++0x07 line.quad 0x00 "GICD_IROUTER162,Interrupt Routing Register 162" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6518++0x07 line.quad 0x00 "GICD_IROUTER163,Interrupt Routing Register 163" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6520++0x07 line.quad 0x00 "GICD_IROUTER164,Interrupt Routing Register 164" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6528++0x07 line.quad 0x00 "GICD_IROUTER165,Interrupt Routing Register 165" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6530++0x07 line.quad 0x00 "GICD_IROUTER166,Interrupt Routing Register 166" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6538++0x07 line.quad 0x00 "GICD_IROUTER167,Interrupt Routing Register 167" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6540++0x07 line.quad 0x00 "GICD_IROUTER168,Interrupt Routing Register 168" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6548++0x07 line.quad 0x00 "GICD_IROUTER169,Interrupt Routing Register 169" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6550++0x07 line.quad 0x00 "GICD_IROUTER170,Interrupt Routing Register 170" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6558++0x07 line.quad 0x00 "GICD_IROUTER171,Interrupt Routing Register 171" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6560++0x07 line.quad 0x00 "GICD_IROUTER172,Interrupt Routing Register 172" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6568++0x07 line.quad 0x00 "GICD_IROUTER173,Interrupt Routing Register 173" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6570++0x07 line.quad 0x00 "GICD_IROUTER174,Interrupt Routing Register 174" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6578++0x07 line.quad 0x00 "GICD_IROUTER175,Interrupt Routing Register 175" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6580++0x07 line.quad 0x00 "GICD_IROUTER176,Interrupt Routing Register 176" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6588++0x07 line.quad 0x00 "GICD_IROUTER177,Interrupt Routing Register 177" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6590++0x07 line.quad 0x00 "GICD_IROUTER178,Interrupt Routing Register 178" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6598++0x07 line.quad 0x00 "GICD_IROUTER179,Interrupt Routing Register 179" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65A0++0x07 line.quad 0x00 "GICD_IROUTER180,Interrupt Routing Register 180" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65A8++0x07 line.quad 0x00 "GICD_IROUTER181,Interrupt Routing Register 181" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65B0++0x07 line.quad 0x00 "GICD_IROUTER182,Interrupt Routing Register 182" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65B8++0x07 line.quad 0x00 "GICD_IROUTER183,Interrupt Routing Register 183" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65C0++0x07 line.quad 0x00 "GICD_IROUTER184,Interrupt Routing Register 184" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65C8++0x07 line.quad 0x00 "GICD_IROUTER185,Interrupt Routing Register 185" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65D0++0x07 line.quad 0x00 "GICD_IROUTER186,Interrupt Routing Register 186" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65D8++0x07 line.quad 0x00 "GICD_IROUTER187,Interrupt Routing Register 187" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65E0++0x07 line.quad 0x00 "GICD_IROUTER188,Interrupt Routing Register 188" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65E8++0x07 line.quad 0x00 "GICD_IROUTER189,Interrupt Routing Register 189" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65F0++0x07 line.quad 0x00 "GICD_IROUTER190,Interrupt Routing Register 190" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x65F8++0x07 line.quad 0x00 "GICD_IROUTER191,Interrupt Routing Register 191" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6600++0x07 line.quad 0x00 "GICD_IROUTER192,Interrupt Routing Register 192" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6608++0x07 line.quad 0x00 "GICD_IROUTER193,Interrupt Routing Register 193" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6610++0x07 line.quad 0x00 "GICD_IROUTER194,Interrupt Routing Register 194" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6618++0x07 line.quad 0x00 "GICD_IROUTER195,Interrupt Routing Register 195" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6620++0x07 line.quad 0x00 "GICD_IROUTER196,Interrupt Routing Register 196" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6628++0x07 line.quad 0x00 "GICD_IROUTER197,Interrupt Routing Register 197" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6630++0x07 line.quad 0x00 "GICD_IROUTER198,Interrupt Routing Register 198" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6638++0x07 line.quad 0x00 "GICD_IROUTER199,Interrupt Routing Register 199" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6640++0x07 line.quad 0x00 "GICD_IROUTER200,Interrupt Routing Register 200" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6648++0x07 line.quad 0x00 "GICD_IROUTER201,Interrupt Routing Register 201" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6650++0x07 line.quad 0x00 "GICD_IROUTER202,Interrupt Routing Register 202" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6658++0x07 line.quad 0x00 "GICD_IROUTER203,Interrupt Routing Register 203" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6660++0x07 line.quad 0x00 "GICD_IROUTER204,Interrupt Routing Register 204" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6668++0x07 line.quad 0x00 "GICD_IROUTER205,Interrupt Routing Register 205" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6670++0x07 line.quad 0x00 "GICD_IROUTER206,Interrupt Routing Register 206" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6678++0x07 line.quad 0x00 "GICD_IROUTER207,Interrupt Routing Register 207" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6680++0x07 line.quad 0x00 "GICD_IROUTER208,Interrupt Routing Register 208" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6688++0x07 line.quad 0x00 "GICD_IROUTER209,Interrupt Routing Register 209" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6690++0x07 line.quad 0x00 "GICD_IROUTER210,Interrupt Routing Register 210" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6698++0x07 line.quad 0x00 "GICD_IROUTER211,Interrupt Routing Register 211" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66A0++0x07 line.quad 0x00 "GICD_IROUTER212,Interrupt Routing Register 212" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66A8++0x07 line.quad 0x00 "GICD_IROUTER213,Interrupt Routing Register 213" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66B0++0x07 line.quad 0x00 "GICD_IROUTER214,Interrupt Routing Register 214" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66B8++0x07 line.quad 0x00 "GICD_IROUTER215,Interrupt Routing Register 215" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66C0++0x07 line.quad 0x00 "GICD_IROUTER216,Interrupt Routing Register 216" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66C8++0x07 line.quad 0x00 "GICD_IROUTER217,Interrupt Routing Register 217" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66D0++0x07 line.quad 0x00 "GICD_IROUTER218,Interrupt Routing Register 218" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66D8++0x07 line.quad 0x00 "GICD_IROUTER219,Interrupt Routing Register 219" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66E0++0x07 line.quad 0x00 "GICD_IROUTER220,Interrupt Routing Register 220" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66E8++0x07 line.quad 0x00 "GICD_IROUTER221,Interrupt Routing Register 221" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66F0++0x07 line.quad 0x00 "GICD_IROUTER222,Interrupt Routing Register 222" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x66F8++0x07 line.quad 0x00 "GICD_IROUTER223,Interrupt Routing Register 223" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6700++0x07 line.quad 0x00 "GICD_IROUTER224,Interrupt Routing Register 224" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6708++0x07 line.quad 0x00 "GICD_IROUTER225,Interrupt Routing Register 225" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6710++0x07 line.quad 0x00 "GICD_IROUTER226,Interrupt Routing Register 226" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6718++0x07 line.quad 0x00 "GICD_IROUTER227,Interrupt Routing Register 227" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6720++0x07 line.quad 0x00 "GICD_IROUTER228,Interrupt Routing Register 228" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6728++0x07 line.quad 0x00 "GICD_IROUTER229,Interrupt Routing Register 229" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6730++0x07 line.quad 0x00 "GICD_IROUTER230,Interrupt Routing Register 230" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6738++0x07 line.quad 0x00 "GICD_IROUTER231,Interrupt Routing Register 231" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6740++0x07 line.quad 0x00 "GICD_IROUTER232,Interrupt Routing Register 232" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6748++0x07 line.quad 0x00 "GICD_IROUTER233,Interrupt Routing Register 233" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6750++0x07 line.quad 0x00 "GICD_IROUTER234,Interrupt Routing Register 234" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6758++0x07 line.quad 0x00 "GICD_IROUTER235,Interrupt Routing Register 235" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6760++0x07 line.quad 0x00 "GICD_IROUTER236,Interrupt Routing Register 236" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6768++0x07 line.quad 0x00 "GICD_IROUTER237,Interrupt Routing Register 237" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6770++0x07 line.quad 0x00 "GICD_IROUTER238,Interrupt Routing Register 238" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6778++0x07 line.quad 0x00 "GICD_IROUTER239,Interrupt Routing Register 239" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6780++0x07 line.quad 0x00 "GICD_IROUTER240,Interrupt Routing Register 240" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6788++0x07 line.quad 0x00 "GICD_IROUTER241,Interrupt Routing Register 241" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6790++0x07 line.quad 0x00 "GICD_IROUTER242,Interrupt Routing Register 242" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6798++0x07 line.quad 0x00 "GICD_IROUTER243,Interrupt Routing Register 243" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67A0++0x07 line.quad 0x00 "GICD_IROUTER244,Interrupt Routing Register 244" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67A8++0x07 line.quad 0x00 "GICD_IROUTER245,Interrupt Routing Register 245" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67B0++0x07 line.quad 0x00 "GICD_IROUTER246,Interrupt Routing Register 246" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67B8++0x07 line.quad 0x00 "GICD_IROUTER247,Interrupt Routing Register 247" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67C0++0x07 line.quad 0x00 "GICD_IROUTER248,Interrupt Routing Register 248" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67C8++0x07 line.quad 0x00 "GICD_IROUTER249,Interrupt Routing Register 249" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67D0++0x07 line.quad 0x00 "GICD_IROUTER250,Interrupt Routing Register 250" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67D8++0x07 line.quad 0x00 "GICD_IROUTER251,Interrupt Routing Register 251" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67E0++0x07 line.quad 0x00 "GICD_IROUTER252,Interrupt Routing Register 252" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67E8++0x07 line.quad 0x00 "GICD_IROUTER253,Interrupt Routing Register 253" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67F0++0x07 line.quad 0x00 "GICD_IROUTER254,Interrupt Routing Register 254" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x67F8++0x07 line.quad 0x00 "GICD_IROUTER255,Interrupt Routing Register 255" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6800++0x07 line.quad 0x00 "GICD_IROUTER256,Interrupt Routing Register 256" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6808++0x07 line.quad 0x00 "GICD_IROUTER257,Interrupt Routing Register 257" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6810++0x07 line.quad 0x00 "GICD_IROUTER258,Interrupt Routing Register 258" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6818++0x07 line.quad 0x00 "GICD_IROUTER259,Interrupt Routing Register 259" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6820++0x07 line.quad 0x00 "GICD_IROUTER260,Interrupt Routing Register 260" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6828++0x07 line.quad 0x00 "GICD_IROUTER261,Interrupt Routing Register 261" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6830++0x07 line.quad 0x00 "GICD_IROUTER262,Interrupt Routing Register 262" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6838++0x07 line.quad 0x00 "GICD_IROUTER263,Interrupt Routing Register 263" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6840++0x07 line.quad 0x00 "GICD_IROUTER264,Interrupt Routing Register 264" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6848++0x07 line.quad 0x00 "GICD_IROUTER265,Interrupt Routing Register 265" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6850++0x07 line.quad 0x00 "GICD_IROUTER266,Interrupt Routing Register 266" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6858++0x07 line.quad 0x00 "GICD_IROUTER267,Interrupt Routing Register 267" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6860++0x07 line.quad 0x00 "GICD_IROUTER268,Interrupt Routing Register 268" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6868++0x07 line.quad 0x00 "GICD_IROUTER269,Interrupt Routing Register 269" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6870++0x07 line.quad 0x00 "GICD_IROUTER270,Interrupt Routing Register 270" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6878++0x07 line.quad 0x00 "GICD_IROUTER271,Interrupt Routing Register 271" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6880++0x07 line.quad 0x00 "GICD_IROUTER272,Interrupt Routing Register 272" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6888++0x07 line.quad 0x00 "GICD_IROUTER273,Interrupt Routing Register 273" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6890++0x07 line.quad 0x00 "GICD_IROUTER274,Interrupt Routing Register 274" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6898++0x07 line.quad 0x00 "GICD_IROUTER275,Interrupt Routing Register 275" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68A0++0x07 line.quad 0x00 "GICD_IROUTER276,Interrupt Routing Register 276" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68A8++0x07 line.quad 0x00 "GICD_IROUTER277,Interrupt Routing Register 277" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68B0++0x07 line.quad 0x00 "GICD_IROUTER278,Interrupt Routing Register 278" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68B8++0x07 line.quad 0x00 "GICD_IROUTER279,Interrupt Routing Register 279" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68C0++0x07 line.quad 0x00 "GICD_IROUTER280,Interrupt Routing Register 280" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68C8++0x07 line.quad 0x00 "GICD_IROUTER281,Interrupt Routing Register 281" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68D0++0x07 line.quad 0x00 "GICD_IROUTER282,Interrupt Routing Register 282" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68D8++0x07 line.quad 0x00 "GICD_IROUTER283,Interrupt Routing Register 283" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68E0++0x07 line.quad 0x00 "GICD_IROUTER284,Interrupt Routing Register 284" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68E8++0x07 line.quad 0x00 "GICD_IROUTER285,Interrupt Routing Register 285" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68F0++0x07 line.quad 0x00 "GICD_IROUTER286,Interrupt Routing Register 286" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x68F8++0x07 line.quad 0x00 "GICD_IROUTER287,Interrupt Routing Register 287" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6900++0x07 line.quad 0x00 "GICD_IROUTER288,Interrupt Routing Register 288" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6908++0x07 line.quad 0x00 "GICD_IROUTER289,Interrupt Routing Register 289" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6910++0x07 line.quad 0x00 "GICD_IROUTER290,Interrupt Routing Register 290" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6918++0x07 line.quad 0x00 "GICD_IROUTER291,Interrupt Routing Register 291" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6920++0x07 line.quad 0x00 "GICD_IROUTER292,Interrupt Routing Register 292" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6928++0x07 line.quad 0x00 "GICD_IROUTER293,Interrupt Routing Register 293" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6930++0x07 line.quad 0x00 "GICD_IROUTER294,Interrupt Routing Register 294" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6938++0x07 line.quad 0x00 "GICD_IROUTER295,Interrupt Routing Register 295" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6940++0x07 line.quad 0x00 "GICD_IROUTER296,Interrupt Routing Register 296" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6948++0x07 line.quad 0x00 "GICD_IROUTER297,Interrupt Routing Register 297" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6950++0x07 line.quad 0x00 "GICD_IROUTER298,Interrupt Routing Register 298" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6958++0x07 line.quad 0x00 "GICD_IROUTER299,Interrupt Routing Register 299" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6960++0x07 line.quad 0x00 "GICD_IROUTER300,Interrupt Routing Register 300" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6968++0x07 line.quad 0x00 "GICD_IROUTER301,Interrupt Routing Register 301" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6970++0x07 line.quad 0x00 "GICD_IROUTER302,Interrupt Routing Register 302" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6978++0x07 line.quad 0x00 "GICD_IROUTER303,Interrupt Routing Register 303" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6980++0x07 line.quad 0x00 "GICD_IROUTER304,Interrupt Routing Register 304" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6988++0x07 line.quad 0x00 "GICD_IROUTER305,Interrupt Routing Register 305" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6990++0x07 line.quad 0x00 "GICD_IROUTER306,Interrupt Routing Register 306" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6998++0x07 line.quad 0x00 "GICD_IROUTER307,Interrupt Routing Register 307" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69A0++0x07 line.quad 0x00 "GICD_IROUTER308,Interrupt Routing Register 308" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69A8++0x07 line.quad 0x00 "GICD_IROUTER309,Interrupt Routing Register 309" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69B0++0x07 line.quad 0x00 "GICD_IROUTER310,Interrupt Routing Register 310" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69B8++0x07 line.quad 0x00 "GICD_IROUTER311,Interrupt Routing Register 311" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69C0++0x07 line.quad 0x00 "GICD_IROUTER312,Interrupt Routing Register 312" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69C8++0x07 line.quad 0x00 "GICD_IROUTER313,Interrupt Routing Register 313" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69D0++0x07 line.quad 0x00 "GICD_IROUTER314,Interrupt Routing Register 314" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69D8++0x07 line.quad 0x00 "GICD_IROUTER315,Interrupt Routing Register 315" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69E0++0x07 line.quad 0x00 "GICD_IROUTER316,Interrupt Routing Register 316" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69E8++0x07 line.quad 0x00 "GICD_IROUTER317,Interrupt Routing Register 317" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69F0++0x07 line.quad 0x00 "GICD_IROUTER318,Interrupt Routing Register 318" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x69F8++0x07 line.quad 0x00 "GICD_IROUTER319,Interrupt Routing Register 319" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A00++0x07 line.quad 0x00 "GICD_IROUTER320,Interrupt Routing Register 320" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A08++0x07 line.quad 0x00 "GICD_IROUTER321,Interrupt Routing Register 321" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A10++0x07 line.quad 0x00 "GICD_IROUTER322,Interrupt Routing Register 322" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A18++0x07 line.quad 0x00 "GICD_IROUTER323,Interrupt Routing Register 323" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A20++0x07 line.quad 0x00 "GICD_IROUTER324,Interrupt Routing Register 324" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A28++0x07 line.quad 0x00 "GICD_IROUTER325,Interrupt Routing Register 325" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A30++0x07 line.quad 0x00 "GICD_IROUTER326,Interrupt Routing Register 326" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A38++0x07 line.quad 0x00 "GICD_IROUTER327,Interrupt Routing Register 327" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A40++0x07 line.quad 0x00 "GICD_IROUTER328,Interrupt Routing Register 328" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A48++0x07 line.quad 0x00 "GICD_IROUTER329,Interrupt Routing Register 329" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A50++0x07 line.quad 0x00 "GICD_IROUTER330,Interrupt Routing Register 330" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A58++0x07 line.quad 0x00 "GICD_IROUTER331,Interrupt Routing Register 331" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A60++0x07 line.quad 0x00 "GICD_IROUTER332,Interrupt Routing Register 332" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A68++0x07 line.quad 0x00 "GICD_IROUTER333,Interrupt Routing Register 333" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A70++0x07 line.quad 0x00 "GICD_IROUTER334,Interrupt Routing Register 334" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A78++0x07 line.quad 0x00 "GICD_IROUTER335,Interrupt Routing Register 335" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A80++0x07 line.quad 0x00 "GICD_IROUTER336,Interrupt Routing Register 336" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A88++0x07 line.quad 0x00 "GICD_IROUTER337,Interrupt Routing Register 337" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A90++0x07 line.quad 0x00 "GICD_IROUTER338,Interrupt Routing Register 338" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6A98++0x07 line.quad 0x00 "GICD_IROUTER339,Interrupt Routing Register 339" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AA0++0x07 line.quad 0x00 "GICD_IROUTER340,Interrupt Routing Register 340" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AA8++0x07 line.quad 0x00 "GICD_IROUTER341,Interrupt Routing Register 341" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AB0++0x07 line.quad 0x00 "GICD_IROUTER342,Interrupt Routing Register 342" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AB8++0x07 line.quad 0x00 "GICD_IROUTER343,Interrupt Routing Register 343" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AC0++0x07 line.quad 0x00 "GICD_IROUTER344,Interrupt Routing Register 344" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AC8++0x07 line.quad 0x00 "GICD_IROUTER345,Interrupt Routing Register 345" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AD0++0x07 line.quad 0x00 "GICD_IROUTER346,Interrupt Routing Register 346" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AD8++0x07 line.quad 0x00 "GICD_IROUTER347,Interrupt Routing Register 347" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AE0++0x07 line.quad 0x00 "GICD_IROUTER348,Interrupt Routing Register 348" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AE8++0x07 line.quad 0x00 "GICD_IROUTER349,Interrupt Routing Register 349" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AF0++0x07 line.quad 0x00 "GICD_IROUTER350,Interrupt Routing Register 350" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6AF8++0x07 line.quad 0x00 "GICD_IROUTER351,Interrupt Routing Register 351" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B00++0x07 line.quad 0x00 "GICD_IROUTER352,Interrupt Routing Register 352" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B08++0x07 line.quad 0x00 "GICD_IROUTER353,Interrupt Routing Register 353" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B10++0x07 line.quad 0x00 "GICD_IROUTER354,Interrupt Routing Register 354" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B18++0x07 line.quad 0x00 "GICD_IROUTER355,Interrupt Routing Register 355" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B20++0x07 line.quad 0x00 "GICD_IROUTER356,Interrupt Routing Register 356" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B28++0x07 line.quad 0x00 "GICD_IROUTER357,Interrupt Routing Register 357" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B30++0x07 line.quad 0x00 "GICD_IROUTER358,Interrupt Routing Register 358" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B38++0x07 line.quad 0x00 "GICD_IROUTER359,Interrupt Routing Register 359" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B40++0x07 line.quad 0x00 "GICD_IROUTER360,Interrupt Routing Register 360" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B48++0x07 line.quad 0x00 "GICD_IROUTER361,Interrupt Routing Register 361" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B50++0x07 line.quad 0x00 "GICD_IROUTER362,Interrupt Routing Register 362" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B58++0x07 line.quad 0x00 "GICD_IROUTER363,Interrupt Routing Register 363" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B60++0x07 line.quad 0x00 "GICD_IROUTER364,Interrupt Routing Register 364" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B68++0x07 line.quad 0x00 "GICD_IROUTER365,Interrupt Routing Register 365" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B70++0x07 line.quad 0x00 "GICD_IROUTER366,Interrupt Routing Register 366" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B78++0x07 line.quad 0x00 "GICD_IROUTER367,Interrupt Routing Register 367" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B80++0x07 line.quad 0x00 "GICD_IROUTER368,Interrupt Routing Register 368" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B88++0x07 line.quad 0x00 "GICD_IROUTER369,Interrupt Routing Register 369" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B90++0x07 line.quad 0x00 "GICD_IROUTER370,Interrupt Routing Register 370" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6B98++0x07 line.quad 0x00 "GICD_IROUTER371,Interrupt Routing Register 371" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BA0++0x07 line.quad 0x00 "GICD_IROUTER372,Interrupt Routing Register 372" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BA8++0x07 line.quad 0x00 "GICD_IROUTER373,Interrupt Routing Register 373" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BB0++0x07 line.quad 0x00 "GICD_IROUTER374,Interrupt Routing Register 374" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BB8++0x07 line.quad 0x00 "GICD_IROUTER375,Interrupt Routing Register 375" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BC0++0x07 line.quad 0x00 "GICD_IROUTER376,Interrupt Routing Register 376" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BC8++0x07 line.quad 0x00 "GICD_IROUTER377,Interrupt Routing Register 377" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BD0++0x07 line.quad 0x00 "GICD_IROUTER378,Interrupt Routing Register 378" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BD8++0x07 line.quad 0x00 "GICD_IROUTER379,Interrupt Routing Register 379" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BE0++0x07 line.quad 0x00 "GICD_IROUTER380,Interrupt Routing Register 380" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BE8++0x07 line.quad 0x00 "GICD_IROUTER381,Interrupt Routing Register 381" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BF0++0x07 line.quad 0x00 "GICD_IROUTER382,Interrupt Routing Register 382" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6BF8++0x07 line.quad 0x00 "GICD_IROUTER383,Interrupt Routing Register 383" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C00++0x07 line.quad 0x00 "GICD_IROUTER384,Interrupt Routing Register 384" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C08++0x07 line.quad 0x00 "GICD_IROUTER385,Interrupt Routing Register 385" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C10++0x07 line.quad 0x00 "GICD_IROUTER386,Interrupt Routing Register 386" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C18++0x07 line.quad 0x00 "GICD_IROUTER387,Interrupt Routing Register 387" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C20++0x07 line.quad 0x00 "GICD_IROUTER388,Interrupt Routing Register 388" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C28++0x07 line.quad 0x00 "GICD_IROUTER389,Interrupt Routing Register 389" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C30++0x07 line.quad 0x00 "GICD_IROUTER390,Interrupt Routing Register 390" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C38++0x07 line.quad 0x00 "GICD_IROUTER391,Interrupt Routing Register 391" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C40++0x07 line.quad 0x00 "GICD_IROUTER392,Interrupt Routing Register 392" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C48++0x07 line.quad 0x00 "GICD_IROUTER393,Interrupt Routing Register 393" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C50++0x07 line.quad 0x00 "GICD_IROUTER394,Interrupt Routing Register 394" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C58++0x07 line.quad 0x00 "GICD_IROUTER395,Interrupt Routing Register 395" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C60++0x07 line.quad 0x00 "GICD_IROUTER396,Interrupt Routing Register 396" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C68++0x07 line.quad 0x00 "GICD_IROUTER397,Interrupt Routing Register 397" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C70++0x07 line.quad 0x00 "GICD_IROUTER398,Interrupt Routing Register 398" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C78++0x07 line.quad 0x00 "GICD_IROUTER399,Interrupt Routing Register 399" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C80++0x07 line.quad 0x00 "GICD_IROUTER400,Interrupt Routing Register 400" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C88++0x07 line.quad 0x00 "GICD_IROUTER401,Interrupt Routing Register 401" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C90++0x07 line.quad 0x00 "GICD_IROUTER402,Interrupt Routing Register 402" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6C98++0x07 line.quad 0x00 "GICD_IROUTER403,Interrupt Routing Register 403" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CA0++0x07 line.quad 0x00 "GICD_IROUTER404,Interrupt Routing Register 404" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CA8++0x07 line.quad 0x00 "GICD_IROUTER405,Interrupt Routing Register 405" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CB0++0x07 line.quad 0x00 "GICD_IROUTER406,Interrupt Routing Register 406" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CB8++0x07 line.quad 0x00 "GICD_IROUTER407,Interrupt Routing Register 407" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CC0++0x07 line.quad 0x00 "GICD_IROUTER408,Interrupt Routing Register 408" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CC8++0x07 line.quad 0x00 "GICD_IROUTER409,Interrupt Routing Register 409" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CD0++0x07 line.quad 0x00 "GICD_IROUTER410,Interrupt Routing Register 410" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CD8++0x07 line.quad 0x00 "GICD_IROUTER411,Interrupt Routing Register 411" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CE0++0x07 line.quad 0x00 "GICD_IROUTER412,Interrupt Routing Register 412" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CE8++0x07 line.quad 0x00 "GICD_IROUTER413,Interrupt Routing Register 413" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CF0++0x07 line.quad 0x00 "GICD_IROUTER414,Interrupt Routing Register 414" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6CF8++0x07 line.quad 0x00 "GICD_IROUTER415,Interrupt Routing Register 415" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D00++0x07 line.quad 0x00 "GICD_IROUTER416,Interrupt Routing Register 416" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D08++0x07 line.quad 0x00 "GICD_IROUTER417,Interrupt Routing Register 417" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D10++0x07 line.quad 0x00 "GICD_IROUTER418,Interrupt Routing Register 418" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D18++0x07 line.quad 0x00 "GICD_IROUTER419,Interrupt Routing Register 419" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D20++0x07 line.quad 0x00 "GICD_IROUTER420,Interrupt Routing Register 420" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D28++0x07 line.quad 0x00 "GICD_IROUTER421,Interrupt Routing Register 421" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D30++0x07 line.quad 0x00 "GICD_IROUTER422,Interrupt Routing Register 422" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D38++0x07 line.quad 0x00 "GICD_IROUTER423,Interrupt Routing Register 423" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D40++0x07 line.quad 0x00 "GICD_IROUTER424,Interrupt Routing Register 424" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D48++0x07 line.quad 0x00 "GICD_IROUTER425,Interrupt Routing Register 425" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D50++0x07 line.quad 0x00 "GICD_IROUTER426,Interrupt Routing Register 426" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D58++0x07 line.quad 0x00 "GICD_IROUTER427,Interrupt Routing Register 427" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D60++0x07 line.quad 0x00 "GICD_IROUTER428,Interrupt Routing Register 428" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D68++0x07 line.quad 0x00 "GICD_IROUTER429,Interrupt Routing Register 429" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D70++0x07 line.quad 0x00 "GICD_IROUTER430,Interrupt Routing Register 430" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D78++0x07 line.quad 0x00 "GICD_IROUTER431,Interrupt Routing Register 431" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D80++0x07 line.quad 0x00 "GICD_IROUTER432,Interrupt Routing Register 432" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D88++0x07 line.quad 0x00 "GICD_IROUTER433,Interrupt Routing Register 433" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D90++0x07 line.quad 0x00 "GICD_IROUTER434,Interrupt Routing Register 434" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6D98++0x07 line.quad 0x00 "GICD_IROUTER435,Interrupt Routing Register 435" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DA0++0x07 line.quad 0x00 "GICD_IROUTER436,Interrupt Routing Register 436" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DA8++0x07 line.quad 0x00 "GICD_IROUTER437,Interrupt Routing Register 437" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DB0++0x07 line.quad 0x00 "GICD_IROUTER438,Interrupt Routing Register 438" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DB8++0x07 line.quad 0x00 "GICD_IROUTER439,Interrupt Routing Register 439" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DC0++0x07 line.quad 0x00 "GICD_IROUTER440,Interrupt Routing Register 440" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DC8++0x07 line.quad 0x00 "GICD_IROUTER441,Interrupt Routing Register 441" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DD0++0x07 line.quad 0x00 "GICD_IROUTER442,Interrupt Routing Register 442" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DD8++0x07 line.quad 0x00 "GICD_IROUTER443,Interrupt Routing Register 443" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DE0++0x07 line.quad 0x00 "GICD_IROUTER444,Interrupt Routing Register 444" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DE8++0x07 line.quad 0x00 "GICD_IROUTER445,Interrupt Routing Register 445" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DF0++0x07 line.quad 0x00 "GICD_IROUTER446,Interrupt Routing Register 446" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6DF8++0x07 line.quad 0x00 "GICD_IROUTER447,Interrupt Routing Register 447" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E00++0x07 line.quad 0x00 "GICD_IROUTER448,Interrupt Routing Register 448" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E08++0x07 line.quad 0x00 "GICD_IROUTER449,Interrupt Routing Register 449" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E10++0x07 line.quad 0x00 "GICD_IROUTER450,Interrupt Routing Register 450" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E18++0x07 line.quad 0x00 "GICD_IROUTER451,Interrupt Routing Register 451" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E20++0x07 line.quad 0x00 "GICD_IROUTER452,Interrupt Routing Register 452" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E28++0x07 line.quad 0x00 "GICD_IROUTER453,Interrupt Routing Register 453" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E30++0x07 line.quad 0x00 "GICD_IROUTER454,Interrupt Routing Register 454" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E38++0x07 line.quad 0x00 "GICD_IROUTER455,Interrupt Routing Register 455" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E40++0x07 line.quad 0x00 "GICD_IROUTER456,Interrupt Routing Register 456" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E48++0x07 line.quad 0x00 "GICD_IROUTER457,Interrupt Routing Register 457" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E50++0x07 line.quad 0x00 "GICD_IROUTER458,Interrupt Routing Register 458" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E58++0x07 line.quad 0x00 "GICD_IROUTER459,Interrupt Routing Register 459" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E60++0x07 line.quad 0x00 "GICD_IROUTER460,Interrupt Routing Register 460" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E68++0x07 line.quad 0x00 "GICD_IROUTER461,Interrupt Routing Register 461" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E70++0x07 line.quad 0x00 "GICD_IROUTER462,Interrupt Routing Register 462" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E78++0x07 line.quad 0x00 "GICD_IROUTER463,Interrupt Routing Register 463" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E80++0x07 line.quad 0x00 "GICD_IROUTER464,Interrupt Routing Register 464" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E88++0x07 line.quad 0x00 "GICD_IROUTER465,Interrupt Routing Register 465" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E90++0x07 line.quad 0x00 "GICD_IROUTER466,Interrupt Routing Register 466" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6E98++0x07 line.quad 0x00 "GICD_IROUTER467,Interrupt Routing Register 467" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EA0++0x07 line.quad 0x00 "GICD_IROUTER468,Interrupt Routing Register 468" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EA8++0x07 line.quad 0x00 "GICD_IROUTER469,Interrupt Routing Register 469" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EB0++0x07 line.quad 0x00 "GICD_IROUTER470,Interrupt Routing Register 470" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EB8++0x07 line.quad 0x00 "GICD_IROUTER471,Interrupt Routing Register 471" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EC0++0x07 line.quad 0x00 "GICD_IROUTER472,Interrupt Routing Register 472" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EC8++0x07 line.quad 0x00 "GICD_IROUTER473,Interrupt Routing Register 473" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6ED0++0x07 line.quad 0x00 "GICD_IROUTER474,Interrupt Routing Register 474" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6ED8++0x07 line.quad 0x00 "GICD_IROUTER475,Interrupt Routing Register 475" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EE0++0x07 line.quad 0x00 "GICD_IROUTER476,Interrupt Routing Register 476" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EE8++0x07 line.quad 0x00 "GICD_IROUTER477,Interrupt Routing Register 477" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EF0++0x07 line.quad 0x00 "GICD_IROUTER478,Interrupt Routing Register 478" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6EF8++0x07 line.quad 0x00 "GICD_IROUTER479,Interrupt Routing Register 479" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F00++0x07 line.quad 0x00 "GICD_IROUTER480,Interrupt Routing Register 480" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F08++0x07 line.quad 0x00 "GICD_IROUTER481,Interrupt Routing Register 481" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F10++0x07 line.quad 0x00 "GICD_IROUTER482,Interrupt Routing Register 482" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F18++0x07 line.quad 0x00 "GICD_IROUTER483,Interrupt Routing Register 483" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F20++0x07 line.quad 0x00 "GICD_IROUTER484,Interrupt Routing Register 484" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F28++0x07 line.quad 0x00 "GICD_IROUTER485,Interrupt Routing Register 485" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F30++0x07 line.quad 0x00 "GICD_IROUTER486,Interrupt Routing Register 486" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F38++0x07 line.quad 0x00 "GICD_IROUTER487,Interrupt Routing Register 487" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F40++0x07 line.quad 0x00 "GICD_IROUTER488,Interrupt Routing Register 488" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F48++0x07 line.quad 0x00 "GICD_IROUTER489,Interrupt Routing Register 489" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F50++0x07 line.quad 0x00 "GICD_IROUTER490,Interrupt Routing Register 490" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F58++0x07 line.quad 0x00 "GICD_IROUTER491,Interrupt Routing Register 491" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F60++0x07 line.quad 0x00 "GICD_IROUTER492,Interrupt Routing Register 492" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F68++0x07 line.quad 0x00 "GICD_IROUTER493,Interrupt Routing Register 493" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F70++0x07 line.quad 0x00 "GICD_IROUTER494,Interrupt Routing Register 494" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F78++0x07 line.quad 0x00 "GICD_IROUTER495,Interrupt Routing Register 495" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F80++0x07 line.quad 0x00 "GICD_IROUTER496,Interrupt Routing Register 496" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F88++0x07 line.quad 0x00 "GICD_IROUTER497,Interrupt Routing Register 497" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F90++0x07 line.quad 0x00 "GICD_IROUTER498,Interrupt Routing Register 498" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6F98++0x07 line.quad 0x00 "GICD_IROUTER499,Interrupt Routing Register 499" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FA0++0x07 line.quad 0x00 "GICD_IROUTER500,Interrupt Routing Register 500" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FA8++0x07 line.quad 0x00 "GICD_IROUTER501,Interrupt Routing Register 501" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FB0++0x07 line.quad 0x00 "GICD_IROUTER502,Interrupt Routing Register 502" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FB8++0x07 line.quad 0x00 "GICD_IROUTER503,Interrupt Routing Register 503" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FC0++0x07 line.quad 0x00 "GICD_IROUTER504,Interrupt Routing Register 504" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FC8++0x07 line.quad 0x00 "GICD_IROUTER505,Interrupt Routing Register 505" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FD0++0x07 line.quad 0x00 "GICD_IROUTER506,Interrupt Routing Register 506" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FD8++0x07 line.quad 0x00 "GICD_IROUTER507,Interrupt Routing Register 507" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FE0++0x07 line.quad 0x00 "GICD_IROUTER508,Interrupt Routing Register 508" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FE8++0x07 line.quad 0x00 "GICD_IROUTER509,Interrupt Routing Register 509" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FF0++0x07 line.quad 0x00 "GICD_IROUTER510,Interrupt Routing Register 510" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x6FF8++0x07 line.quad 0x00 "GICD_IROUTER511,Interrupt Routing Register 511" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7000++0x07 line.quad 0x00 "GICD_IROUTER512,Interrupt Routing Register 512" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7008++0x07 line.quad 0x00 "GICD_IROUTER513,Interrupt Routing Register 513" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7010++0x07 line.quad 0x00 "GICD_IROUTER514,Interrupt Routing Register 514" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7018++0x07 line.quad 0x00 "GICD_IROUTER515,Interrupt Routing Register 515" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7020++0x07 line.quad 0x00 "GICD_IROUTER516,Interrupt Routing Register 516" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7028++0x07 line.quad 0x00 "GICD_IROUTER517,Interrupt Routing Register 517" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7030++0x07 line.quad 0x00 "GICD_IROUTER518,Interrupt Routing Register 518" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7038++0x07 line.quad 0x00 "GICD_IROUTER519,Interrupt Routing Register 519" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7040++0x07 line.quad 0x00 "GICD_IROUTER520,Interrupt Routing Register 520" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7048++0x07 line.quad 0x00 "GICD_IROUTER521,Interrupt Routing Register 521" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7050++0x07 line.quad 0x00 "GICD_IROUTER522,Interrupt Routing Register 522" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7058++0x07 line.quad 0x00 "GICD_IROUTER523,Interrupt Routing Register 523" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7060++0x07 line.quad 0x00 "GICD_IROUTER524,Interrupt Routing Register 524" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7068++0x07 line.quad 0x00 "GICD_IROUTER525,Interrupt Routing Register 525" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7070++0x07 line.quad 0x00 "GICD_IROUTER526,Interrupt Routing Register 526" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7078++0x07 line.quad 0x00 "GICD_IROUTER527,Interrupt Routing Register 527" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7080++0x07 line.quad 0x00 "GICD_IROUTER528,Interrupt Routing Register 528" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7088++0x07 line.quad 0x00 "GICD_IROUTER529,Interrupt Routing Register 529" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7090++0x07 line.quad 0x00 "GICD_IROUTER530,Interrupt Routing Register 530" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7098++0x07 line.quad 0x00 "GICD_IROUTER531,Interrupt Routing Register 531" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70A0++0x07 line.quad 0x00 "GICD_IROUTER532,Interrupt Routing Register 532" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70A8++0x07 line.quad 0x00 "GICD_IROUTER533,Interrupt Routing Register 533" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70B0++0x07 line.quad 0x00 "GICD_IROUTER534,Interrupt Routing Register 534" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70B8++0x07 line.quad 0x00 "GICD_IROUTER535,Interrupt Routing Register 535" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70C0++0x07 line.quad 0x00 "GICD_IROUTER536,Interrupt Routing Register 536" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70C8++0x07 line.quad 0x00 "GICD_IROUTER537,Interrupt Routing Register 537" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70D0++0x07 line.quad 0x00 "GICD_IROUTER538,Interrupt Routing Register 538" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70D8++0x07 line.quad 0x00 "GICD_IROUTER539,Interrupt Routing Register 539" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70E0++0x07 line.quad 0x00 "GICD_IROUTER540,Interrupt Routing Register 540" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70E8++0x07 line.quad 0x00 "GICD_IROUTER541,Interrupt Routing Register 541" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70F0++0x07 line.quad 0x00 "GICD_IROUTER542,Interrupt Routing Register 542" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x70F8++0x07 line.quad 0x00 "GICD_IROUTER543,Interrupt Routing Register 543" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7100++0x07 line.quad 0x00 "GICD_IROUTER544,Interrupt Routing Register 544" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7108++0x07 line.quad 0x00 "GICD_IROUTER545,Interrupt Routing Register 545" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7110++0x07 line.quad 0x00 "GICD_IROUTER546,Interrupt Routing Register 546" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7118++0x07 line.quad 0x00 "GICD_IROUTER547,Interrupt Routing Register 547" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7120++0x07 line.quad 0x00 "GICD_IROUTER548,Interrupt Routing Register 548" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7128++0x07 line.quad 0x00 "GICD_IROUTER549,Interrupt Routing Register 549" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7130++0x07 line.quad 0x00 "GICD_IROUTER550,Interrupt Routing Register 550" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7138++0x07 line.quad 0x00 "GICD_IROUTER551,Interrupt Routing Register 551" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7140++0x07 line.quad 0x00 "GICD_IROUTER552,Interrupt Routing Register 552" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7148++0x07 line.quad 0x00 "GICD_IROUTER553,Interrupt Routing Register 553" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7150++0x07 line.quad 0x00 "GICD_IROUTER554,Interrupt Routing Register 554" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7158++0x07 line.quad 0x00 "GICD_IROUTER555,Interrupt Routing Register 555" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7160++0x07 line.quad 0x00 "GICD_IROUTER556,Interrupt Routing Register 556" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7168++0x07 line.quad 0x00 "GICD_IROUTER557,Interrupt Routing Register 557" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7170++0x07 line.quad 0x00 "GICD_IROUTER558,Interrupt Routing Register 558" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7178++0x07 line.quad 0x00 "GICD_IROUTER559,Interrupt Routing Register 559" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7180++0x07 line.quad 0x00 "GICD_IROUTER560,Interrupt Routing Register 560" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7188++0x07 line.quad 0x00 "GICD_IROUTER561,Interrupt Routing Register 561" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7190++0x07 line.quad 0x00 "GICD_IROUTER562,Interrupt Routing Register 562" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7198++0x07 line.quad 0x00 "GICD_IROUTER563,Interrupt Routing Register 563" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71A0++0x07 line.quad 0x00 "GICD_IROUTER564,Interrupt Routing Register 564" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71A8++0x07 line.quad 0x00 "GICD_IROUTER565,Interrupt Routing Register 565" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71B0++0x07 line.quad 0x00 "GICD_IROUTER566,Interrupt Routing Register 566" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71B8++0x07 line.quad 0x00 "GICD_IROUTER567,Interrupt Routing Register 567" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71C0++0x07 line.quad 0x00 "GICD_IROUTER568,Interrupt Routing Register 568" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71C8++0x07 line.quad 0x00 "GICD_IROUTER569,Interrupt Routing Register 569" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71D0++0x07 line.quad 0x00 "GICD_IROUTER570,Interrupt Routing Register 570" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71D8++0x07 line.quad 0x00 "GICD_IROUTER571,Interrupt Routing Register 571" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71E0++0x07 line.quad 0x00 "GICD_IROUTER572,Interrupt Routing Register 572" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71E8++0x07 line.quad 0x00 "GICD_IROUTER573,Interrupt Routing Register 573" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71F0++0x07 line.quad 0x00 "GICD_IROUTER574,Interrupt Routing Register 574" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x71F8++0x07 line.quad 0x00 "GICD_IROUTER575,Interrupt Routing Register 575" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7200++0x07 line.quad 0x00 "GICD_IROUTER576,Interrupt Routing Register 576" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7208++0x07 line.quad 0x00 "GICD_IROUTER577,Interrupt Routing Register 577" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7210++0x07 line.quad 0x00 "GICD_IROUTER578,Interrupt Routing Register 578" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7218++0x07 line.quad 0x00 "GICD_IROUTER579,Interrupt Routing Register 579" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7220++0x07 line.quad 0x00 "GICD_IROUTER580,Interrupt Routing Register 580" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7228++0x07 line.quad 0x00 "GICD_IROUTER581,Interrupt Routing Register 581" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7230++0x07 line.quad 0x00 "GICD_IROUTER582,Interrupt Routing Register 582" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7238++0x07 line.quad 0x00 "GICD_IROUTER583,Interrupt Routing Register 583" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7240++0x07 line.quad 0x00 "GICD_IROUTER584,Interrupt Routing Register 584" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7248++0x07 line.quad 0x00 "GICD_IROUTER585,Interrupt Routing Register 585" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7250++0x07 line.quad 0x00 "GICD_IROUTER586,Interrupt Routing Register 586" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7258++0x07 line.quad 0x00 "GICD_IROUTER587,Interrupt Routing Register 587" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7260++0x07 line.quad 0x00 "GICD_IROUTER588,Interrupt Routing Register 588" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7268++0x07 line.quad 0x00 "GICD_IROUTER589,Interrupt Routing Register 589" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7270++0x07 line.quad 0x00 "GICD_IROUTER590,Interrupt Routing Register 590" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7278++0x07 line.quad 0x00 "GICD_IROUTER591,Interrupt Routing Register 591" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7280++0x07 line.quad 0x00 "GICD_IROUTER592,Interrupt Routing Register 592" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7288++0x07 line.quad 0x00 "GICD_IROUTER593,Interrupt Routing Register 593" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7290++0x07 line.quad 0x00 "GICD_IROUTER594,Interrupt Routing Register 594" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7298++0x07 line.quad 0x00 "GICD_IROUTER595,Interrupt Routing Register 595" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72A0++0x07 line.quad 0x00 "GICD_IROUTER596,Interrupt Routing Register 596" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72A8++0x07 line.quad 0x00 "GICD_IROUTER597,Interrupt Routing Register 597" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72B0++0x07 line.quad 0x00 "GICD_IROUTER598,Interrupt Routing Register 598" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72B8++0x07 line.quad 0x00 "GICD_IROUTER599,Interrupt Routing Register 599" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72C0++0x07 line.quad 0x00 "GICD_IROUTER600,Interrupt Routing Register 600" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72C8++0x07 line.quad 0x00 "GICD_IROUTER601,Interrupt Routing Register 601" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72D0++0x07 line.quad 0x00 "GICD_IROUTER602,Interrupt Routing Register 602" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72D8++0x07 line.quad 0x00 "GICD_IROUTER603,Interrupt Routing Register 603" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72E0++0x07 line.quad 0x00 "GICD_IROUTER604,Interrupt Routing Register 604" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72E8++0x07 line.quad 0x00 "GICD_IROUTER605,Interrupt Routing Register 605" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72F0++0x07 line.quad 0x00 "GICD_IROUTER606,Interrupt Routing Register 606" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x72F8++0x07 line.quad 0x00 "GICD_IROUTER607,Interrupt Routing Register 607" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7300++0x07 line.quad 0x00 "GICD_IROUTER608,Interrupt Routing Register 608" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7308++0x07 line.quad 0x00 "GICD_IROUTER609,Interrupt Routing Register 609" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7310++0x07 line.quad 0x00 "GICD_IROUTER610,Interrupt Routing Register 610" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7318++0x07 line.quad 0x00 "GICD_IROUTER611,Interrupt Routing Register 611" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7320++0x07 line.quad 0x00 "GICD_IROUTER612,Interrupt Routing Register 612" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7328++0x07 line.quad 0x00 "GICD_IROUTER613,Interrupt Routing Register 613" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7330++0x07 line.quad 0x00 "GICD_IROUTER614,Interrupt Routing Register 614" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7338++0x07 line.quad 0x00 "GICD_IROUTER615,Interrupt Routing Register 615" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7340++0x07 line.quad 0x00 "GICD_IROUTER616,Interrupt Routing Register 616" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7348++0x07 line.quad 0x00 "GICD_IROUTER617,Interrupt Routing Register 617" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7350++0x07 line.quad 0x00 "GICD_IROUTER618,Interrupt Routing Register 618" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7358++0x07 line.quad 0x00 "GICD_IROUTER619,Interrupt Routing Register 619" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7360++0x07 line.quad 0x00 "GICD_IROUTER620,Interrupt Routing Register 620" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7368++0x07 line.quad 0x00 "GICD_IROUTER621,Interrupt Routing Register 621" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7370++0x07 line.quad 0x00 "GICD_IROUTER622,Interrupt Routing Register 622" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7378++0x07 line.quad 0x00 "GICD_IROUTER623,Interrupt Routing Register 623" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7380++0x07 line.quad 0x00 "GICD_IROUTER624,Interrupt Routing Register 624" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7388++0x07 line.quad 0x00 "GICD_IROUTER625,Interrupt Routing Register 625" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7390++0x07 line.quad 0x00 "GICD_IROUTER626,Interrupt Routing Register 626" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7398++0x07 line.quad 0x00 "GICD_IROUTER627,Interrupt Routing Register 627" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73A0++0x07 line.quad 0x00 "GICD_IROUTER628,Interrupt Routing Register 628" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73A8++0x07 line.quad 0x00 "GICD_IROUTER629,Interrupt Routing Register 629" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73B0++0x07 line.quad 0x00 "GICD_IROUTER630,Interrupt Routing Register 630" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73B8++0x07 line.quad 0x00 "GICD_IROUTER631,Interrupt Routing Register 631" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73C0++0x07 line.quad 0x00 "GICD_IROUTER632,Interrupt Routing Register 632" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73C8++0x07 line.quad 0x00 "GICD_IROUTER633,Interrupt Routing Register 633" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73D0++0x07 line.quad 0x00 "GICD_IROUTER634,Interrupt Routing Register 634" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73D8++0x07 line.quad 0x00 "GICD_IROUTER635,Interrupt Routing Register 635" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73E0++0x07 line.quad 0x00 "GICD_IROUTER636,Interrupt Routing Register 636" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73E8++0x07 line.quad 0x00 "GICD_IROUTER637,Interrupt Routing Register 637" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73F0++0x07 line.quad 0x00 "GICD_IROUTER638,Interrupt Routing Register 638" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x73F8++0x07 line.quad 0x00 "GICD_IROUTER639,Interrupt Routing Register 639" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7400++0x07 line.quad 0x00 "GICD_IROUTER640,Interrupt Routing Register 640" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7408++0x07 line.quad 0x00 "GICD_IROUTER641,Interrupt Routing Register 641" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7410++0x07 line.quad 0x00 "GICD_IROUTER642,Interrupt Routing Register 642" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7418++0x07 line.quad 0x00 "GICD_IROUTER643,Interrupt Routing Register 643" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7420++0x07 line.quad 0x00 "GICD_IROUTER644,Interrupt Routing Register 644" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7428++0x07 line.quad 0x00 "GICD_IROUTER645,Interrupt Routing Register 645" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7430++0x07 line.quad 0x00 "GICD_IROUTER646,Interrupt Routing Register 646" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7438++0x07 line.quad 0x00 "GICD_IROUTER647,Interrupt Routing Register 647" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7440++0x07 line.quad 0x00 "GICD_IROUTER648,Interrupt Routing Register 648" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7448++0x07 line.quad 0x00 "GICD_IROUTER649,Interrupt Routing Register 649" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7450++0x07 line.quad 0x00 "GICD_IROUTER650,Interrupt Routing Register 650" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7458++0x07 line.quad 0x00 "GICD_IROUTER651,Interrupt Routing Register 651" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7460++0x07 line.quad 0x00 "GICD_IROUTER652,Interrupt Routing Register 652" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7468++0x07 line.quad 0x00 "GICD_IROUTER653,Interrupt Routing Register 653" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7470++0x07 line.quad 0x00 "GICD_IROUTER654,Interrupt Routing Register 654" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7478++0x07 line.quad 0x00 "GICD_IROUTER655,Interrupt Routing Register 655" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7480++0x07 line.quad 0x00 "GICD_IROUTER656,Interrupt Routing Register 656" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7488++0x07 line.quad 0x00 "GICD_IROUTER657,Interrupt Routing Register 657" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7490++0x07 line.quad 0x00 "GICD_IROUTER658,Interrupt Routing Register 658" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7498++0x07 line.quad 0x00 "GICD_IROUTER659,Interrupt Routing Register 659" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74A0++0x07 line.quad 0x00 "GICD_IROUTER660,Interrupt Routing Register 660" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74A8++0x07 line.quad 0x00 "GICD_IROUTER661,Interrupt Routing Register 661" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74B0++0x07 line.quad 0x00 "GICD_IROUTER662,Interrupt Routing Register 662" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74B8++0x07 line.quad 0x00 "GICD_IROUTER663,Interrupt Routing Register 663" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74C0++0x07 line.quad 0x00 "GICD_IROUTER664,Interrupt Routing Register 664" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74C8++0x07 line.quad 0x00 "GICD_IROUTER665,Interrupt Routing Register 665" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74D0++0x07 line.quad 0x00 "GICD_IROUTER666,Interrupt Routing Register 666" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74D8++0x07 line.quad 0x00 "GICD_IROUTER667,Interrupt Routing Register 667" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74E0++0x07 line.quad 0x00 "GICD_IROUTER668,Interrupt Routing Register 668" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74E8++0x07 line.quad 0x00 "GICD_IROUTER669,Interrupt Routing Register 669" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74F0++0x07 line.quad 0x00 "GICD_IROUTER670,Interrupt Routing Register 670" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x74F8++0x07 line.quad 0x00 "GICD_IROUTER671,Interrupt Routing Register 671" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7500++0x07 line.quad 0x00 "GICD_IROUTER672,Interrupt Routing Register 672" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7508++0x07 line.quad 0x00 "GICD_IROUTER673,Interrupt Routing Register 673" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7510++0x07 line.quad 0x00 "GICD_IROUTER674,Interrupt Routing Register 674" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7518++0x07 line.quad 0x00 "GICD_IROUTER675,Interrupt Routing Register 675" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7520++0x07 line.quad 0x00 "GICD_IROUTER676,Interrupt Routing Register 676" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7528++0x07 line.quad 0x00 "GICD_IROUTER677,Interrupt Routing Register 677" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7530++0x07 line.quad 0x00 "GICD_IROUTER678,Interrupt Routing Register 678" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7538++0x07 line.quad 0x00 "GICD_IROUTER679,Interrupt Routing Register 679" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7540++0x07 line.quad 0x00 "GICD_IROUTER680,Interrupt Routing Register 680" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7548++0x07 line.quad 0x00 "GICD_IROUTER681,Interrupt Routing Register 681" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7550++0x07 line.quad 0x00 "GICD_IROUTER682,Interrupt Routing Register 682" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7558++0x07 line.quad 0x00 "GICD_IROUTER683,Interrupt Routing Register 683" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7560++0x07 line.quad 0x00 "GICD_IROUTER684,Interrupt Routing Register 684" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7568++0x07 line.quad 0x00 "GICD_IROUTER685,Interrupt Routing Register 685" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7570++0x07 line.quad 0x00 "GICD_IROUTER686,Interrupt Routing Register 686" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7578++0x07 line.quad 0x00 "GICD_IROUTER687,Interrupt Routing Register 687" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7580++0x07 line.quad 0x00 "GICD_IROUTER688,Interrupt Routing Register 688" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7588++0x07 line.quad 0x00 "GICD_IROUTER689,Interrupt Routing Register 689" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7590++0x07 line.quad 0x00 "GICD_IROUTER690,Interrupt Routing Register 690" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7598++0x07 line.quad 0x00 "GICD_IROUTER691,Interrupt Routing Register 691" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75A0++0x07 line.quad 0x00 "GICD_IROUTER692,Interrupt Routing Register 692" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75A8++0x07 line.quad 0x00 "GICD_IROUTER693,Interrupt Routing Register 693" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75B0++0x07 line.quad 0x00 "GICD_IROUTER694,Interrupt Routing Register 694" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75B8++0x07 line.quad 0x00 "GICD_IROUTER695,Interrupt Routing Register 695" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75C0++0x07 line.quad 0x00 "GICD_IROUTER696,Interrupt Routing Register 696" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75C8++0x07 line.quad 0x00 "GICD_IROUTER697,Interrupt Routing Register 697" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75D0++0x07 line.quad 0x00 "GICD_IROUTER698,Interrupt Routing Register 698" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75D8++0x07 line.quad 0x00 "GICD_IROUTER699,Interrupt Routing Register 699" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75E0++0x07 line.quad 0x00 "GICD_IROUTER700,Interrupt Routing Register 700" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75E8++0x07 line.quad 0x00 "GICD_IROUTER701,Interrupt Routing Register 701" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75F0++0x07 line.quad 0x00 "GICD_IROUTER702,Interrupt Routing Register 702" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x75F8++0x07 line.quad 0x00 "GICD_IROUTER703,Interrupt Routing Register 703" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7600++0x07 line.quad 0x00 "GICD_IROUTER704,Interrupt Routing Register 704" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7608++0x07 line.quad 0x00 "GICD_IROUTER705,Interrupt Routing Register 705" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7610++0x07 line.quad 0x00 "GICD_IROUTER706,Interrupt Routing Register 706" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7618++0x07 line.quad 0x00 "GICD_IROUTER707,Interrupt Routing Register 707" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7620++0x07 line.quad 0x00 "GICD_IROUTER708,Interrupt Routing Register 708" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7628++0x07 line.quad 0x00 "GICD_IROUTER709,Interrupt Routing Register 709" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7630++0x07 line.quad 0x00 "GICD_IROUTER710,Interrupt Routing Register 710" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7638++0x07 line.quad 0x00 "GICD_IROUTER711,Interrupt Routing Register 711" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7640++0x07 line.quad 0x00 "GICD_IROUTER712,Interrupt Routing Register 712" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7648++0x07 line.quad 0x00 "GICD_IROUTER713,Interrupt Routing Register 713" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7650++0x07 line.quad 0x00 "GICD_IROUTER714,Interrupt Routing Register 714" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7658++0x07 line.quad 0x00 "GICD_IROUTER715,Interrupt Routing Register 715" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7660++0x07 line.quad 0x00 "GICD_IROUTER716,Interrupt Routing Register 716" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7668++0x07 line.quad 0x00 "GICD_IROUTER717,Interrupt Routing Register 717" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7670++0x07 line.quad 0x00 "GICD_IROUTER718,Interrupt Routing Register 718" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7678++0x07 line.quad 0x00 "GICD_IROUTER719,Interrupt Routing Register 719" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7680++0x07 line.quad 0x00 "GICD_IROUTER720,Interrupt Routing Register 720" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7688++0x07 line.quad 0x00 "GICD_IROUTER721,Interrupt Routing Register 721" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7690++0x07 line.quad 0x00 "GICD_IROUTER722,Interrupt Routing Register 722" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7698++0x07 line.quad 0x00 "GICD_IROUTER723,Interrupt Routing Register 723" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76A0++0x07 line.quad 0x00 "GICD_IROUTER724,Interrupt Routing Register 724" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76A8++0x07 line.quad 0x00 "GICD_IROUTER725,Interrupt Routing Register 725" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76B0++0x07 line.quad 0x00 "GICD_IROUTER726,Interrupt Routing Register 726" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76B8++0x07 line.quad 0x00 "GICD_IROUTER727,Interrupt Routing Register 727" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76C0++0x07 line.quad 0x00 "GICD_IROUTER728,Interrupt Routing Register 728" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76C8++0x07 line.quad 0x00 "GICD_IROUTER729,Interrupt Routing Register 729" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76D0++0x07 line.quad 0x00 "GICD_IROUTER730,Interrupt Routing Register 730" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76D8++0x07 line.quad 0x00 "GICD_IROUTER731,Interrupt Routing Register 731" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76E0++0x07 line.quad 0x00 "GICD_IROUTER732,Interrupt Routing Register 732" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76E8++0x07 line.quad 0x00 "GICD_IROUTER733,Interrupt Routing Register 733" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76F0++0x07 line.quad 0x00 "GICD_IROUTER734,Interrupt Routing Register 734" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x76F8++0x07 line.quad 0x00 "GICD_IROUTER735,Interrupt Routing Register 735" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7700++0x07 line.quad 0x00 "GICD_IROUTER736,Interrupt Routing Register 736" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7708++0x07 line.quad 0x00 "GICD_IROUTER737,Interrupt Routing Register 737" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7710++0x07 line.quad 0x00 "GICD_IROUTER738,Interrupt Routing Register 738" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7718++0x07 line.quad 0x00 "GICD_IROUTER739,Interrupt Routing Register 739" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7720++0x07 line.quad 0x00 "GICD_IROUTER740,Interrupt Routing Register 740" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7728++0x07 line.quad 0x00 "GICD_IROUTER741,Interrupt Routing Register 741" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7730++0x07 line.quad 0x00 "GICD_IROUTER742,Interrupt Routing Register 742" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7738++0x07 line.quad 0x00 "GICD_IROUTER743,Interrupt Routing Register 743" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7740++0x07 line.quad 0x00 "GICD_IROUTER744,Interrupt Routing Register 744" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7748++0x07 line.quad 0x00 "GICD_IROUTER745,Interrupt Routing Register 745" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7750++0x07 line.quad 0x00 "GICD_IROUTER746,Interrupt Routing Register 746" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7758++0x07 line.quad 0x00 "GICD_IROUTER747,Interrupt Routing Register 747" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7760++0x07 line.quad 0x00 "GICD_IROUTER748,Interrupt Routing Register 748" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7768++0x07 line.quad 0x00 "GICD_IROUTER749,Interrupt Routing Register 749" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7770++0x07 line.quad 0x00 "GICD_IROUTER750,Interrupt Routing Register 750" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7778++0x07 line.quad 0x00 "GICD_IROUTER751,Interrupt Routing Register 751" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7780++0x07 line.quad 0x00 "GICD_IROUTER752,Interrupt Routing Register 752" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7788++0x07 line.quad 0x00 "GICD_IROUTER753,Interrupt Routing Register 753" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7790++0x07 line.quad 0x00 "GICD_IROUTER754,Interrupt Routing Register 754" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7798++0x07 line.quad 0x00 "GICD_IROUTER755,Interrupt Routing Register 755" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77A0++0x07 line.quad 0x00 "GICD_IROUTER756,Interrupt Routing Register 756" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77A8++0x07 line.quad 0x00 "GICD_IROUTER757,Interrupt Routing Register 757" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77B0++0x07 line.quad 0x00 "GICD_IROUTER758,Interrupt Routing Register 758" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77B8++0x07 line.quad 0x00 "GICD_IROUTER759,Interrupt Routing Register 759" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77C0++0x07 line.quad 0x00 "GICD_IROUTER760,Interrupt Routing Register 760" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77C8++0x07 line.quad 0x00 "GICD_IROUTER761,Interrupt Routing Register 761" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77D0++0x07 line.quad 0x00 "GICD_IROUTER762,Interrupt Routing Register 762" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77D8++0x07 line.quad 0x00 "GICD_IROUTER763,Interrupt Routing Register 763" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77E0++0x07 line.quad 0x00 "GICD_IROUTER764,Interrupt Routing Register 764" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77E8++0x07 line.quad 0x00 "GICD_IROUTER765,Interrupt Routing Register 765" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77F0++0x07 line.quad 0x00 "GICD_IROUTER766,Interrupt Routing Register 766" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x77F8++0x07 line.quad 0x00 "GICD_IROUTER767,Interrupt Routing Register 767" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7800++0x07 line.quad 0x00 "GICD_IROUTER768,Interrupt Routing Register 768" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7808++0x07 line.quad 0x00 "GICD_IROUTER769,Interrupt Routing Register 769" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7810++0x07 line.quad 0x00 "GICD_IROUTER770,Interrupt Routing Register 770" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7818++0x07 line.quad 0x00 "GICD_IROUTER771,Interrupt Routing Register 771" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7820++0x07 line.quad 0x00 "GICD_IROUTER772,Interrupt Routing Register 772" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7828++0x07 line.quad 0x00 "GICD_IROUTER773,Interrupt Routing Register 773" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7830++0x07 line.quad 0x00 "GICD_IROUTER774,Interrupt Routing Register 774" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7838++0x07 line.quad 0x00 "GICD_IROUTER775,Interrupt Routing Register 775" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7840++0x07 line.quad 0x00 "GICD_IROUTER776,Interrupt Routing Register 776" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7848++0x07 line.quad 0x00 "GICD_IROUTER777,Interrupt Routing Register 777" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7850++0x07 line.quad 0x00 "GICD_IROUTER778,Interrupt Routing Register 778" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7858++0x07 line.quad 0x00 "GICD_IROUTER779,Interrupt Routing Register 779" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7860++0x07 line.quad 0x00 "GICD_IROUTER780,Interrupt Routing Register 780" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7868++0x07 line.quad 0x00 "GICD_IROUTER781,Interrupt Routing Register 781" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7870++0x07 line.quad 0x00 "GICD_IROUTER782,Interrupt Routing Register 782" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7878++0x07 line.quad 0x00 "GICD_IROUTER783,Interrupt Routing Register 783" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7880++0x07 line.quad 0x00 "GICD_IROUTER784,Interrupt Routing Register 784" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7888++0x07 line.quad 0x00 "GICD_IROUTER785,Interrupt Routing Register 785" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7890++0x07 line.quad 0x00 "GICD_IROUTER786,Interrupt Routing Register 786" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7898++0x07 line.quad 0x00 "GICD_IROUTER787,Interrupt Routing Register 787" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78A0++0x07 line.quad 0x00 "GICD_IROUTER788,Interrupt Routing Register 788" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78A8++0x07 line.quad 0x00 "GICD_IROUTER789,Interrupt Routing Register 789" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78B0++0x07 line.quad 0x00 "GICD_IROUTER790,Interrupt Routing Register 790" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78B8++0x07 line.quad 0x00 "GICD_IROUTER791,Interrupt Routing Register 791" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78C0++0x07 line.quad 0x00 "GICD_IROUTER792,Interrupt Routing Register 792" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78C8++0x07 line.quad 0x00 "GICD_IROUTER793,Interrupt Routing Register 793" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78D0++0x07 line.quad 0x00 "GICD_IROUTER794,Interrupt Routing Register 794" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78D8++0x07 line.quad 0x00 "GICD_IROUTER795,Interrupt Routing Register 795" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78E0++0x07 line.quad 0x00 "GICD_IROUTER796,Interrupt Routing Register 796" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78E8++0x07 line.quad 0x00 "GICD_IROUTER797,Interrupt Routing Register 797" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78F0++0x07 line.quad 0x00 "GICD_IROUTER798,Interrupt Routing Register 798" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x78F8++0x07 line.quad 0x00 "GICD_IROUTER799,Interrupt Routing Register 799" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7900++0x07 line.quad 0x00 "GICD_IROUTER800,Interrupt Routing Register 800" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7908++0x07 line.quad 0x00 "GICD_IROUTER801,Interrupt Routing Register 801" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7910++0x07 line.quad 0x00 "GICD_IROUTER802,Interrupt Routing Register 802" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7918++0x07 line.quad 0x00 "GICD_IROUTER803,Interrupt Routing Register 803" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7920++0x07 line.quad 0x00 "GICD_IROUTER804,Interrupt Routing Register 804" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7928++0x07 line.quad 0x00 "GICD_IROUTER805,Interrupt Routing Register 805" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7930++0x07 line.quad 0x00 "GICD_IROUTER806,Interrupt Routing Register 806" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7938++0x07 line.quad 0x00 "GICD_IROUTER807,Interrupt Routing Register 807" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7940++0x07 line.quad 0x00 "GICD_IROUTER808,Interrupt Routing Register 808" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7948++0x07 line.quad 0x00 "GICD_IROUTER809,Interrupt Routing Register 809" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7950++0x07 line.quad 0x00 "GICD_IROUTER810,Interrupt Routing Register 810" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7958++0x07 line.quad 0x00 "GICD_IROUTER811,Interrupt Routing Register 811" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7960++0x07 line.quad 0x00 "GICD_IROUTER812,Interrupt Routing Register 812" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7968++0x07 line.quad 0x00 "GICD_IROUTER813,Interrupt Routing Register 813" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7970++0x07 line.quad 0x00 "GICD_IROUTER814,Interrupt Routing Register 814" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7978++0x07 line.quad 0x00 "GICD_IROUTER815,Interrupt Routing Register 815" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7980++0x07 line.quad 0x00 "GICD_IROUTER816,Interrupt Routing Register 816" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7988++0x07 line.quad 0x00 "GICD_IROUTER817,Interrupt Routing Register 817" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7990++0x07 line.quad 0x00 "GICD_IROUTER818,Interrupt Routing Register 818" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7998++0x07 line.quad 0x00 "GICD_IROUTER819,Interrupt Routing Register 819" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79A0++0x07 line.quad 0x00 "GICD_IROUTER820,Interrupt Routing Register 820" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79A8++0x07 line.quad 0x00 "GICD_IROUTER821,Interrupt Routing Register 821" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79B0++0x07 line.quad 0x00 "GICD_IROUTER822,Interrupt Routing Register 822" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79B8++0x07 line.quad 0x00 "GICD_IROUTER823,Interrupt Routing Register 823" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79C0++0x07 line.quad 0x00 "GICD_IROUTER824,Interrupt Routing Register 824" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79C8++0x07 line.quad 0x00 "GICD_IROUTER825,Interrupt Routing Register 825" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79D0++0x07 line.quad 0x00 "GICD_IROUTER826,Interrupt Routing Register 826" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79D8++0x07 line.quad 0x00 "GICD_IROUTER827,Interrupt Routing Register 827" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79E0++0x07 line.quad 0x00 "GICD_IROUTER828,Interrupt Routing Register 828" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79E8++0x07 line.quad 0x00 "GICD_IROUTER829,Interrupt Routing Register 829" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79F0++0x07 line.quad 0x00 "GICD_IROUTER830,Interrupt Routing Register 830" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x79F8++0x07 line.quad 0x00 "GICD_IROUTER831,Interrupt Routing Register 831" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A00++0x07 line.quad 0x00 "GICD_IROUTER832,Interrupt Routing Register 832" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A08++0x07 line.quad 0x00 "GICD_IROUTER833,Interrupt Routing Register 833" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A10++0x07 line.quad 0x00 "GICD_IROUTER834,Interrupt Routing Register 834" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A18++0x07 line.quad 0x00 "GICD_IROUTER835,Interrupt Routing Register 835" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A20++0x07 line.quad 0x00 "GICD_IROUTER836,Interrupt Routing Register 836" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A28++0x07 line.quad 0x00 "GICD_IROUTER837,Interrupt Routing Register 837" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A30++0x07 line.quad 0x00 "GICD_IROUTER838,Interrupt Routing Register 838" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A38++0x07 line.quad 0x00 "GICD_IROUTER839,Interrupt Routing Register 839" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A40++0x07 line.quad 0x00 "GICD_IROUTER840,Interrupt Routing Register 840" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A48++0x07 line.quad 0x00 "GICD_IROUTER841,Interrupt Routing Register 841" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A50++0x07 line.quad 0x00 "GICD_IROUTER842,Interrupt Routing Register 842" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A58++0x07 line.quad 0x00 "GICD_IROUTER843,Interrupt Routing Register 843" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A60++0x07 line.quad 0x00 "GICD_IROUTER844,Interrupt Routing Register 844" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A68++0x07 line.quad 0x00 "GICD_IROUTER845,Interrupt Routing Register 845" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A70++0x07 line.quad 0x00 "GICD_IROUTER846,Interrupt Routing Register 846" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A78++0x07 line.quad 0x00 "GICD_IROUTER847,Interrupt Routing Register 847" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A80++0x07 line.quad 0x00 "GICD_IROUTER848,Interrupt Routing Register 848" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A88++0x07 line.quad 0x00 "GICD_IROUTER849,Interrupt Routing Register 849" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A90++0x07 line.quad 0x00 "GICD_IROUTER850,Interrupt Routing Register 850" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7A98++0x07 line.quad 0x00 "GICD_IROUTER851,Interrupt Routing Register 851" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AA0++0x07 line.quad 0x00 "GICD_IROUTER852,Interrupt Routing Register 852" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AA8++0x07 line.quad 0x00 "GICD_IROUTER853,Interrupt Routing Register 853" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AB0++0x07 line.quad 0x00 "GICD_IROUTER854,Interrupt Routing Register 854" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AB8++0x07 line.quad 0x00 "GICD_IROUTER855,Interrupt Routing Register 855" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AC0++0x07 line.quad 0x00 "GICD_IROUTER856,Interrupt Routing Register 856" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AC8++0x07 line.quad 0x00 "GICD_IROUTER857,Interrupt Routing Register 857" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AD0++0x07 line.quad 0x00 "GICD_IROUTER858,Interrupt Routing Register 858" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AD8++0x07 line.quad 0x00 "GICD_IROUTER859,Interrupt Routing Register 859" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AE0++0x07 line.quad 0x00 "GICD_IROUTER860,Interrupt Routing Register 860" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AE8++0x07 line.quad 0x00 "GICD_IROUTER861,Interrupt Routing Register 861" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AF0++0x07 line.quad 0x00 "GICD_IROUTER862,Interrupt Routing Register 862" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7AF8++0x07 line.quad 0x00 "GICD_IROUTER863,Interrupt Routing Register 863" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B00++0x07 line.quad 0x00 "GICD_IROUTER864,Interrupt Routing Register 864" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B08++0x07 line.quad 0x00 "GICD_IROUTER865,Interrupt Routing Register 865" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B10++0x07 line.quad 0x00 "GICD_IROUTER866,Interrupt Routing Register 866" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B18++0x07 line.quad 0x00 "GICD_IROUTER867,Interrupt Routing Register 867" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B20++0x07 line.quad 0x00 "GICD_IROUTER868,Interrupt Routing Register 868" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B28++0x07 line.quad 0x00 "GICD_IROUTER869,Interrupt Routing Register 869" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B30++0x07 line.quad 0x00 "GICD_IROUTER870,Interrupt Routing Register 870" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B38++0x07 line.quad 0x00 "GICD_IROUTER871,Interrupt Routing Register 871" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B40++0x07 line.quad 0x00 "GICD_IROUTER872,Interrupt Routing Register 872" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B48++0x07 line.quad 0x00 "GICD_IROUTER873,Interrupt Routing Register 873" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B50++0x07 line.quad 0x00 "GICD_IROUTER874,Interrupt Routing Register 874" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B58++0x07 line.quad 0x00 "GICD_IROUTER875,Interrupt Routing Register 875" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B60++0x07 line.quad 0x00 "GICD_IROUTER876,Interrupt Routing Register 876" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B68++0x07 line.quad 0x00 "GICD_IROUTER877,Interrupt Routing Register 877" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B70++0x07 line.quad 0x00 "GICD_IROUTER878,Interrupt Routing Register 878" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B78++0x07 line.quad 0x00 "GICD_IROUTER879,Interrupt Routing Register 879" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B80++0x07 line.quad 0x00 "GICD_IROUTER880,Interrupt Routing Register 880" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B88++0x07 line.quad 0x00 "GICD_IROUTER881,Interrupt Routing Register 881" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B90++0x07 line.quad 0x00 "GICD_IROUTER882,Interrupt Routing Register 882" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7B98++0x07 line.quad 0x00 "GICD_IROUTER883,Interrupt Routing Register 883" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BA0++0x07 line.quad 0x00 "GICD_IROUTER884,Interrupt Routing Register 884" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BA8++0x07 line.quad 0x00 "GICD_IROUTER885,Interrupt Routing Register 885" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BB0++0x07 line.quad 0x00 "GICD_IROUTER886,Interrupt Routing Register 886" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BB8++0x07 line.quad 0x00 "GICD_IROUTER887,Interrupt Routing Register 887" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BC0++0x07 line.quad 0x00 "GICD_IROUTER888,Interrupt Routing Register 888" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BC8++0x07 line.quad 0x00 "GICD_IROUTER889,Interrupt Routing Register 889" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BD0++0x07 line.quad 0x00 "GICD_IROUTER890,Interrupt Routing Register 890" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BD8++0x07 line.quad 0x00 "GICD_IROUTER891,Interrupt Routing Register 891" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BE0++0x07 line.quad 0x00 "GICD_IROUTER892,Interrupt Routing Register 892" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BE8++0x07 line.quad 0x00 "GICD_IROUTER893,Interrupt Routing Register 893" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BF0++0x07 line.quad 0x00 "GICD_IROUTER894,Interrupt Routing Register 894" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7BF8++0x07 line.quad 0x00 "GICD_IROUTER895,Interrupt Routing Register 895" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C00++0x07 line.quad 0x00 "GICD_IROUTER896,Interrupt Routing Register 896" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C08++0x07 line.quad 0x00 "GICD_IROUTER897,Interrupt Routing Register 897" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C10++0x07 line.quad 0x00 "GICD_IROUTER898,Interrupt Routing Register 898" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C18++0x07 line.quad 0x00 "GICD_IROUTER899,Interrupt Routing Register 899" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C20++0x07 line.quad 0x00 "GICD_IROUTER900,Interrupt Routing Register 900" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C28++0x07 line.quad 0x00 "GICD_IROUTER901,Interrupt Routing Register 901" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C30++0x07 line.quad 0x00 "GICD_IROUTER902,Interrupt Routing Register 902" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C38++0x07 line.quad 0x00 "GICD_IROUTER903,Interrupt Routing Register 903" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C40++0x07 line.quad 0x00 "GICD_IROUTER904,Interrupt Routing Register 904" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C48++0x07 line.quad 0x00 "GICD_IROUTER905,Interrupt Routing Register 905" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C50++0x07 line.quad 0x00 "GICD_IROUTER906,Interrupt Routing Register 906" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C58++0x07 line.quad 0x00 "GICD_IROUTER907,Interrupt Routing Register 907" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C60++0x07 line.quad 0x00 "GICD_IROUTER908,Interrupt Routing Register 908" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C68++0x07 line.quad 0x00 "GICD_IROUTER909,Interrupt Routing Register 909" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C70++0x07 line.quad 0x00 "GICD_IROUTER910,Interrupt Routing Register 910" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C78++0x07 line.quad 0x00 "GICD_IROUTER911,Interrupt Routing Register 911" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C80++0x07 line.quad 0x00 "GICD_IROUTER912,Interrupt Routing Register 912" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C88++0x07 line.quad 0x00 "GICD_IROUTER913,Interrupt Routing Register 913" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C90++0x07 line.quad 0x00 "GICD_IROUTER914,Interrupt Routing Register 914" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7C98++0x07 line.quad 0x00 "GICD_IROUTER915,Interrupt Routing Register 915" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CA0++0x07 line.quad 0x00 "GICD_IROUTER916,Interrupt Routing Register 916" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CA8++0x07 line.quad 0x00 "GICD_IROUTER917,Interrupt Routing Register 917" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CB0++0x07 line.quad 0x00 "GICD_IROUTER918,Interrupt Routing Register 918" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CB8++0x07 line.quad 0x00 "GICD_IROUTER919,Interrupt Routing Register 919" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CC0++0x07 line.quad 0x00 "GICD_IROUTER920,Interrupt Routing Register 920" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CC8++0x07 line.quad 0x00 "GICD_IROUTER921,Interrupt Routing Register 921" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CD0++0x07 line.quad 0x00 "GICD_IROUTER922,Interrupt Routing Register 922" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CD8++0x07 line.quad 0x00 "GICD_IROUTER923,Interrupt Routing Register 923" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CE0++0x07 line.quad 0x00 "GICD_IROUTER924,Interrupt Routing Register 924" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CE8++0x07 line.quad 0x00 "GICD_IROUTER925,Interrupt Routing Register 925" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CF0++0x07 line.quad 0x00 "GICD_IROUTER926,Interrupt Routing Register 926" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7CF8++0x07 line.quad 0x00 "GICD_IROUTER927,Interrupt Routing Register 927" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D00++0x07 line.quad 0x00 "GICD_IROUTER928,Interrupt Routing Register 928" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D08++0x07 line.quad 0x00 "GICD_IROUTER929,Interrupt Routing Register 929" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D10++0x07 line.quad 0x00 "GICD_IROUTER930,Interrupt Routing Register 930" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D18++0x07 line.quad 0x00 "GICD_IROUTER931,Interrupt Routing Register 931" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D20++0x07 line.quad 0x00 "GICD_IROUTER932,Interrupt Routing Register 932" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D28++0x07 line.quad 0x00 "GICD_IROUTER933,Interrupt Routing Register 933" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D30++0x07 line.quad 0x00 "GICD_IROUTER934,Interrupt Routing Register 934" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D38++0x07 line.quad 0x00 "GICD_IROUTER935,Interrupt Routing Register 935" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D40++0x07 line.quad 0x00 "GICD_IROUTER936,Interrupt Routing Register 936" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D48++0x07 line.quad 0x00 "GICD_IROUTER937,Interrupt Routing Register 937" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D50++0x07 line.quad 0x00 "GICD_IROUTER938,Interrupt Routing Register 938" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D58++0x07 line.quad 0x00 "GICD_IROUTER939,Interrupt Routing Register 939" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D60++0x07 line.quad 0x00 "GICD_IROUTER940,Interrupt Routing Register 940" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D68++0x07 line.quad 0x00 "GICD_IROUTER941,Interrupt Routing Register 941" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D70++0x07 line.quad 0x00 "GICD_IROUTER942,Interrupt Routing Register 942" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D78++0x07 line.quad 0x00 "GICD_IROUTER943,Interrupt Routing Register 943" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D80++0x07 line.quad 0x00 "GICD_IROUTER944,Interrupt Routing Register 944" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D88++0x07 line.quad 0x00 "GICD_IROUTER945,Interrupt Routing Register 945" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D90++0x07 line.quad 0x00 "GICD_IROUTER946,Interrupt Routing Register 946" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7D98++0x07 line.quad 0x00 "GICD_IROUTER947,Interrupt Routing Register 947" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DA0++0x07 line.quad 0x00 "GICD_IROUTER948,Interrupt Routing Register 948" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DA8++0x07 line.quad 0x00 "GICD_IROUTER949,Interrupt Routing Register 949" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DB0++0x07 line.quad 0x00 "GICD_IROUTER950,Interrupt Routing Register 950" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DB8++0x07 line.quad 0x00 "GICD_IROUTER951,Interrupt Routing Register 951" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DC0++0x07 line.quad 0x00 "GICD_IROUTER952,Interrupt Routing Register 952" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DC8++0x07 line.quad 0x00 "GICD_IROUTER953,Interrupt Routing Register 953" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DD0++0x07 line.quad 0x00 "GICD_IROUTER954,Interrupt Routing Register 954" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DD8++0x07 line.quad 0x00 "GICD_IROUTER955,Interrupt Routing Register 955" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DE0++0x07 line.quad 0x00 "GICD_IROUTER956,Interrupt Routing Register 956" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DE8++0x07 line.quad 0x00 "GICD_IROUTER957,Interrupt Routing Register 957" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DF0++0x07 line.quad 0x00 "GICD_IROUTER958,Interrupt Routing Register 958" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7DF8++0x07 line.quad 0x00 "GICD_IROUTER959,Interrupt Routing Register 959" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E00++0x07 line.quad 0x00 "GICD_IROUTER960,Interrupt Routing Register 960" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E08++0x07 line.quad 0x00 "GICD_IROUTER961,Interrupt Routing Register 961" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E10++0x07 line.quad 0x00 "GICD_IROUTER962,Interrupt Routing Register 962" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E18++0x07 line.quad 0x00 "GICD_IROUTER963,Interrupt Routing Register 963" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E20++0x07 line.quad 0x00 "GICD_IROUTER964,Interrupt Routing Register 964" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E28++0x07 line.quad 0x00 "GICD_IROUTER965,Interrupt Routing Register 965" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E30++0x07 line.quad 0x00 "GICD_IROUTER966,Interrupt Routing Register 966" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E38++0x07 line.quad 0x00 "GICD_IROUTER967,Interrupt Routing Register 967" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E40++0x07 line.quad 0x00 "GICD_IROUTER968,Interrupt Routing Register 968" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E48++0x07 line.quad 0x00 "GICD_IROUTER969,Interrupt Routing Register 969" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E50++0x07 line.quad 0x00 "GICD_IROUTER970,Interrupt Routing Register 970" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E58++0x07 line.quad 0x00 "GICD_IROUTER971,Interrupt Routing Register 971" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E60++0x07 line.quad 0x00 "GICD_IROUTER972,Interrupt Routing Register 972" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E68++0x07 line.quad 0x00 "GICD_IROUTER973,Interrupt Routing Register 973" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E70++0x07 line.quad 0x00 "GICD_IROUTER974,Interrupt Routing Register 974" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E78++0x07 line.quad 0x00 "GICD_IROUTER975,Interrupt Routing Register 975" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E80++0x07 line.quad 0x00 "GICD_IROUTER976,Interrupt Routing Register 976" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E88++0x07 line.quad 0x00 "GICD_IROUTER977,Interrupt Routing Register 977" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E90++0x07 line.quad 0x00 "GICD_IROUTER978,Interrupt Routing Register 978" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7E98++0x07 line.quad 0x00 "GICD_IROUTER979,Interrupt Routing Register 979" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EA0++0x07 line.quad 0x00 "GICD_IROUTER980,Interrupt Routing Register 980" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EA8++0x07 line.quad 0x00 "GICD_IROUTER981,Interrupt Routing Register 981" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EB0++0x07 line.quad 0x00 "GICD_IROUTER982,Interrupt Routing Register 982" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EB8++0x07 line.quad 0x00 "GICD_IROUTER983,Interrupt Routing Register 983" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EC0++0x07 line.quad 0x00 "GICD_IROUTER984,Interrupt Routing Register 984" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EC8++0x07 line.quad 0x00 "GICD_IROUTER985,Interrupt Routing Register 985" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7ED0++0x07 line.quad 0x00 "GICD_IROUTER986,Interrupt Routing Register 986" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7ED8++0x07 line.quad 0x00 "GICD_IROUTER987,Interrupt Routing Register 987" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EE0++0x07 line.quad 0x00 "GICD_IROUTER988,Interrupt Routing Register 988" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EE8++0x07 line.quad 0x00 "GICD_IROUTER989,Interrupt Routing Register 989" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EF0++0x07 line.quad 0x00 "GICD_IROUTER990,Interrupt Routing Register 990" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" group.quad 0x7EF8++0x07 line.quad 0x00 "GICD_IROUTER991,Interrupt Routing Register 991" hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3" bitfld.quad 0x00 31. " IRM ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node" textline " " hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2" hexmask.quad.byte 0x00 8.--15. 1. " AFF1 ,Affinity level 1" textline " " hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0" tree.end width 22. tree "Implementation Defined Test Registers" rgroup.long 0xC000++0x03 line.long 0x00 "GICD_ESTATUSR,GICD_ESTATUSR" bitfld.long 0x00 31. " SRWP ,Super Register Write Pending" "Not pending,Pending" wgroup.long 0xC004++0x03 line.long 0x00 "GICD_ERRTESTR,Error Test Register" bitfld.long 0x00 1. " AXIM_ERR ,Drives the axim_err pin to 0b1 for 1 cycle" "Low,High" bitfld.long 0x00 0. " ECC_FATAL ,Drives the ecc_fatal pin to 0b1 for 1 cycle" "Low,High" textline " " if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01) rgroup.long 0xC084++0x03 line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0" bitfld.long 0x00 31. " SPIS63 ,SPI Status Bit 63" "Low,High" bitfld.long 0x00 30. " SPIS62 ,SPI Status Bit 62" "Low,High" bitfld.long 0x00 29. " SPIS61 ,SPI Status Bit 61" "Low,High" textline " " bitfld.long 0x00 28. " SPIS60 ,SPI Status Bit 60" "Low,High" bitfld.long 0x00 27. " SPIS59 ,SPI Status Bit 59" "Low,High" bitfld.long 0x00 26. " SPIS58 ,SPI Status Bit 58" "Low,High" textline " " bitfld.long 0x00 25. " SPIS57 ,SPI Status Bit 57" "Low,High" bitfld.long 0x00 24. " SPIS56 ,SPI Status Bit 56" "Low,High" bitfld.long 0x00 23. " SPIS55 ,SPI Status Bit 55" "Low,High" textline " " bitfld.long 0x00 22. " SPIS54 ,SPI Status Bit 54" "Low,High" bitfld.long 0x00 21. " SPIS53 ,SPI Status Bit 53" "Low,High" bitfld.long 0x00 20. " SPIS52 ,SPI Status Bit 52" "Low,High" textline " " bitfld.long 0x00 19. " SPIS51 ,SPI Status Bit 51" "Low,High" bitfld.long 0x00 18. " SPIS50 ,SPI Status Bit 50" "Low,High" bitfld.long 0x00 17. " SPIS49 ,SPI Status Bit 49" "Low,High" textline " " bitfld.long 0x00 16. " SPIS48 ,SPI Status Bit 48" "Low,High" bitfld.long 0x00 15. " SPIS47 ,SPI Status Bit 47" "Low,High" bitfld.long 0x00 14. " SPIS46 ,SPI Status Bit 46" "Low,High" textline " " bitfld.long 0x00 13. " SPIS45 ,SPI Status Bit 45" "Low,High" bitfld.long 0x00 12. " SPIS44 ,SPI Status Bit 44" "Low,High" bitfld.long 0x00 11. " SPIS43 ,SPI Status Bit 43" "Low,High" textline " " bitfld.long 0x00 10. " SPIS42 ,SPI Status Bit 42" "Low,High" bitfld.long 0x00 9. " SPIS41 ,SPI Status Bit 41" "Low,High" bitfld.long 0x00 8. " SPIS40 ,SPI Status Bit 40" "Low,High" textline " " bitfld.long 0x00 7. " SPIS39 ,SPI Status Bit 39" "Low,High" bitfld.long 0x00 6. " SPIS38 ,SPI Status Bit 38" "Low,High" bitfld.long 0x00 5. " SPIS37 ,SPI Status Bit 37" "Low,High" textline " " bitfld.long 0x00 4. " SPIS36 ,SPI Status Bit 36" "Low,High" bitfld.long 0x00 3. " SPIS35 ,SPI Status Bit 35" "Low,High" bitfld.long 0x00 2. " SPIS34 ,SPI Status Bit 34" "Low,High" textline " " bitfld.long 0x00 1. " SPIS33 ,SPI Status Bit 33" "Low,High" bitfld.long 0x00 0. " SPIS32 ,SPI Status Bit 32" "Low,High" else hgroup.long 0xC084++0x03 hide.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02) rgroup.long 0xC088++0x03 line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" bitfld.long 0x00 31. " SPIS95 ,SPI Status Bit 95" "Low,High" bitfld.long 0x00 30. " SPIS94 ,SPI Status Bit 94" "Low,High" bitfld.long 0x00 29. " SPIS93 ,SPI Status Bit 93" "Low,High" textline " " bitfld.long 0x00 28. " SPIS92 ,SPI Status Bit 92" "Low,High" bitfld.long 0x00 27. " SPIS91 ,SPI Status Bit 91" "Low,High" bitfld.long 0x00 26. " SPIS90 ,SPI Status Bit 90" "Low,High" textline " " bitfld.long 0x00 25. " SPIS89 ,SPI Status Bit 89" "Low,High" bitfld.long 0x00 24. " SPIS88 ,SPI Status Bit 88" "Low,High" bitfld.long 0x00 23. " SPIS87 ,SPI Status Bit 87" "Low,High" textline " " bitfld.long 0x00 22. " SPIS86 ,SPI Status Bit 86" "Low,High" bitfld.long 0x00 21. " SPIS85 ,SPI Status Bit 85" "Low,High" bitfld.long 0x00 20. " SPIS84 ,SPI Status Bit 84" "Low,High" textline " " bitfld.long 0x00 19. " SPIS83 ,SPI Status Bit 83" "Low,High" bitfld.long 0x00 18. " SPIS82 ,SPI Status Bit 82" "Low,High" bitfld.long 0x00 17. " SPIS81 ,SPI Status Bit 81" "Low,High" textline " " bitfld.long 0x00 16. " SPIS80 ,SPI Status Bit 80" "Low,High" bitfld.long 0x00 15. " SPIS79 ,SPI Status Bit 79" "Low,High" bitfld.long 0x00 14. " SPIS78 ,SPI Status Bit 78" "Low,High" textline " " bitfld.long 0x00 13. " SPIS77 ,SPI Status Bit 77" "Low,High" bitfld.long 0x00 12. " SPIS76 ,SPI Status Bit 76" "Low,High" bitfld.long 0x00 11. " SPIS75 ,SPI Status Bit 75" "Low,High" textline " " bitfld.long 0x00 10. " SPIS74 ,SPI Status Bit 74" "Low,High" bitfld.long 0x00 9. " SPIS73 ,SPI Status Bit 73" "Low,High" bitfld.long 0x00 8. " SPIS72 ,SPI Status Bit 72" "Low,High" textline " " bitfld.long 0x00 7. " SPIS71 ,SPI Status Bit 71" "Low,High" bitfld.long 0x00 6. " SPIS70 ,SPI Status Bit 70" "Low,High" bitfld.long 0x00 5. " SPIS69 ,SPI Status Bit 69" "Low,High" textline " " bitfld.long 0x00 4. " SPIS68 ,SPI Status Bit 68" "Low,High" bitfld.long 0x00 3. " SPIS67 ,SPI Status Bit 67" "Low,High" bitfld.long 0x00 2. " SPIS66 ,SPI Status Bit 66" "Low,High" textline " " bitfld.long 0x00 1. " SPIS65 ,SPI Status Bit 65" "Low,High" bitfld.long 0x00 0. " SPIS64 ,SPI Status Bit 64" "Low,High" else hgroup.long 0xC088++0x03 hide.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03) rgroup.long 0xC08C++0x03 line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" bitfld.long 0x00 31. " SPIS127 ,SPI Status Bit 127" "Low,High" bitfld.long 0x00 30. " SPIS126 ,SPI Status Bit 126" "Low,High" bitfld.long 0x00 29. " SPIS125 ,SPI Status Bit 125" "Low,High" textline " " bitfld.long 0x00 28. " SPIS124 ,SPI Status Bit 124" "Low,High" bitfld.long 0x00 27. " SPIS123 ,SPI Status Bit 123" "Low,High" bitfld.long 0x00 26. " SPIS122 ,SPI Status Bit 122" "Low,High" textline " " bitfld.long 0x00 25. " SPIS121 ,SPI Status Bit 121" "Low,High" bitfld.long 0x00 24. " SPIS120 ,SPI Status Bit 120" "Low,High" bitfld.long 0x00 23. " SPIS119 ,SPI Status Bit 119" "Low,High" textline " " bitfld.long 0x00 22. " SPIS118 ,SPI Status Bit 118" "Low,High" bitfld.long 0x00 21. " SPIS117 ,SPI Status Bit 117" "Low,High" bitfld.long 0x00 20. " SPIS116 ,SPI Status Bit 116" "Low,High" textline " " bitfld.long 0x00 19. " SPIS115 ,SPI Status Bit 115" "Low,High" bitfld.long 0x00 18. " SPIS114 ,SPI Status Bit 114" "Low,High" bitfld.long 0x00 17. " SPIS113 ,SPI Status Bit 113" "Low,High" textline " " bitfld.long 0x00 16. " SPIS112 ,SPI Status Bit 112" "Low,High" bitfld.long 0x00 15. " SPIS111 ,SPI Status Bit 111" "Low,High" bitfld.long 0x00 14. " SPIS110 ,SPI Status Bit 110" "Low,High" textline " " bitfld.long 0x00 13. " SPIS109 ,SPI Status Bit 109" "Low,High" bitfld.long 0x00 12. " SPIS108 ,SPI Status Bit 108" "Low,High" bitfld.long 0x00 11. " SPIS107 ,SPI Status Bit 107" "Low,High" textline " " bitfld.long 0x00 10. " SPIS106 ,SPI Status Bit 106" "Low,High" bitfld.long 0x00 9. " SPIS105 ,SPI Status Bit 105" "Low,High" bitfld.long 0x00 8. " SPIS104 ,SPI Status Bit 104" "Low,High" textline " " bitfld.long 0x00 7. " SPIS103 ,SPI Status Bit 103" "Low,High" bitfld.long 0x00 6. " SPIS102 ,SPI Status Bit 102" "Low,High" bitfld.long 0x00 5. " SPIS101 ,SPI Status Bit 101" "Low,High" textline " " bitfld.long 0x00 4. " SPIS100 ,SPI Status Bit 100" "Low,High" bitfld.long 0x00 3. " SPIS99 ,SPI Status Bit 99" "Low,High" bitfld.long 0x00 2. " SPIS98 ,SPI Status Bit 98" "Low,High" textline " " bitfld.long 0x00 1. " SPIS97 ,SPI Status Bit 97" "Low,High" bitfld.long 0x00 0. " SPIS96 ,SPI Status Bit 96" "Low,High" else hgroup.long 0xC08C++0x03 hide.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04) rgroup.long 0xC090++0x03 line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" bitfld.long 0x00 31. " SPIS159 ,SPI Status Bit 159" "Low,High" bitfld.long 0x00 30. " SPIS158 ,SPI Status Bit 158" "Low,High" bitfld.long 0x00 29. " SPIS157 ,SPI Status Bit 157" "Low,High" textline " " bitfld.long 0x00 28. " SPIS156 ,SPI Status Bit 156" "Low,High" bitfld.long 0x00 27. " SPIS155 ,SPI Status Bit 155" "Low,High" bitfld.long 0x00 26. " SPIS154 ,SPI Status Bit 154" "Low,High" textline " " bitfld.long 0x00 25. " SPIS153 ,SPI Status Bit 153" "Low,High" bitfld.long 0x00 24. " SPIS152 ,SPI Status Bit 152" "Low,High" bitfld.long 0x00 23. " SPIS151 ,SPI Status Bit 151" "Low,High" textline " " bitfld.long 0x00 22. " SPIS150 ,SPI Status Bit 150" "Low,High" bitfld.long 0x00 21. " SPIS149 ,SPI Status Bit 149" "Low,High" bitfld.long 0x00 20. " SPIS148 ,SPI Status Bit 148" "Low,High" textline " " bitfld.long 0x00 19. " SPIS147 ,SPI Status Bit 147" "Low,High" bitfld.long 0x00 18. " SPIS146 ,SPI Status Bit 146" "Low,High" bitfld.long 0x00 17. " SPIS145 ,SPI Status Bit 145" "Low,High" textline " " bitfld.long 0x00 16. " SPIS144 ,SPI Status Bit 144" "Low,High" bitfld.long 0x00 15. " SPIS143 ,SPI Status Bit 143" "Low,High" bitfld.long 0x00 14. " SPIS142 ,SPI Status Bit 142" "Low,High" textline " " bitfld.long 0x00 13. " SPIS141 ,SPI Status Bit 141" "Low,High" bitfld.long 0x00 12. " SPIS140 ,SPI Status Bit 140" "Low,High" bitfld.long 0x00 11. " SPIS139 ,SPI Status Bit 139" "Low,High" textline " " bitfld.long 0x00 10. " SPIS138 ,SPI Status Bit 138" "Low,High" bitfld.long 0x00 9. " SPIS137 ,SPI Status Bit 137" "Low,High" bitfld.long 0x00 8. " SPIS136 ,SPI Status Bit 136" "Low,High" textline " " bitfld.long 0x00 7. " SPIS135 ,SPI Status Bit 135" "Low,High" bitfld.long 0x00 6. " SPIS134 ,SPI Status Bit 134" "Low,High" bitfld.long 0x00 5. " SPIS133 ,SPI Status Bit 133" "Low,High" textline " " bitfld.long 0x00 4. " SPIS132 ,SPI Status Bit 132" "Low,High" bitfld.long 0x00 3. " SPIS131 ,SPI Status Bit 131" "Low,High" bitfld.long 0x00 2. " SPIS130 ,SPI Status Bit 130" "Low,High" textline " " bitfld.long 0x00 1. " SPIS129 ,SPI Status Bit 129" "Low,High" bitfld.long 0x00 0. " SPIS128 ,SPI Status Bit 128" "Low,High" else hgroup.long 0xC090++0x03 hide.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05) rgroup.long 0xC094++0x03 line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" bitfld.long 0x00 31. " SPIS191 ,SPI Status Bit 191" "Low,High" bitfld.long 0x00 30. " SPIS190 ,SPI Status Bit 190" "Low,High" bitfld.long 0x00 29. " SPIS189 ,SPI Status Bit 189" "Low,High" textline " " bitfld.long 0x00 28. " SPIS188 ,SPI Status Bit 188" "Low,High" bitfld.long 0x00 27. " SPIS187 ,SPI Status Bit 187" "Low,High" bitfld.long 0x00 26. " SPIS186 ,SPI Status Bit 186" "Low,High" textline " " bitfld.long 0x00 25. " SPIS185 ,SPI Status Bit 185" "Low,High" bitfld.long 0x00 24. " SPIS184 ,SPI Status Bit 184" "Low,High" bitfld.long 0x00 23. " SPIS183 ,SPI Status Bit 183" "Low,High" textline " " bitfld.long 0x00 22. " SPIS182 ,SPI Status Bit 182" "Low,High" bitfld.long 0x00 21. " SPIS181 ,SPI Status Bit 181" "Low,High" bitfld.long 0x00 20. " SPIS180 ,SPI Status Bit 180" "Low,High" textline " " bitfld.long 0x00 19. " SPIS179 ,SPI Status Bit 179" "Low,High" bitfld.long 0x00 18. " SPIS178 ,SPI Status Bit 178" "Low,High" bitfld.long 0x00 17. " SPIS177 ,SPI Status Bit 177" "Low,High" textline " " bitfld.long 0x00 16. " SPIS176 ,SPI Status Bit 176" "Low,High" bitfld.long 0x00 15. " SPIS175 ,SPI Status Bit 175" "Low,High" bitfld.long 0x00 14. " SPIS174 ,SPI Status Bit 174" "Low,High" textline " " bitfld.long 0x00 13. " SPIS173 ,SPI Status Bit 173" "Low,High" bitfld.long 0x00 12. " SPIS172 ,SPI Status Bit 172" "Low,High" bitfld.long 0x00 11. " SPIS171 ,SPI Status Bit 171" "Low,High" textline " " bitfld.long 0x00 10. " SPIS170 ,SPI Status Bit 170" "Low,High" bitfld.long 0x00 9. " SPIS169 ,SPI Status Bit 169" "Low,High" bitfld.long 0x00 8. " SPIS168 ,SPI Status Bit 168" "Low,High" textline " " bitfld.long 0x00 7. " SPIS167 ,SPI Status Bit 167" "Low,High" bitfld.long 0x00 6. " SPIS166 ,SPI Status Bit 166" "Low,High" bitfld.long 0x00 5. " SPIS165 ,SPI Status Bit 165" "Low,High" textline " " bitfld.long 0x00 4. " SPIS164 ,SPI Status Bit 164" "Low,High" bitfld.long 0x00 3. " SPIS163 ,SPI Status Bit 163" "Low,High" bitfld.long 0x00 2. " SPIS162 ,SPI Status Bit 162" "Low,High" textline " " bitfld.long 0x00 1. " SPIS161 ,SPI Status Bit 161" "Low,High" bitfld.long 0x00 0. " SPIS160 ,SPI Status Bit 160" "Low,High" else hgroup.long 0xC094++0x03 hide.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06) rgroup.long 0xC098++0x03 line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" bitfld.long 0x00 31. " SPIS223 ,SPI Status Bit 223" "Low,High" bitfld.long 0x00 30. " SPIS222 ,SPI Status Bit 222" "Low,High" bitfld.long 0x00 29. " SPIS221 ,SPI Status Bit 221" "Low,High" textline " " bitfld.long 0x00 28. " SPIS220 ,SPI Status Bit 220" "Low,High" bitfld.long 0x00 27. " SPIS219 ,SPI Status Bit 219" "Low,High" bitfld.long 0x00 26. " SPIS218 ,SPI Status Bit 218" "Low,High" textline " " bitfld.long 0x00 25. " SPIS217 ,SPI Status Bit 217" "Low,High" bitfld.long 0x00 24. " SPIS216 ,SPI Status Bit 216" "Low,High" bitfld.long 0x00 23. " SPIS215 ,SPI Status Bit 215" "Low,High" textline " " bitfld.long 0x00 22. " SPIS214 ,SPI Status Bit 214" "Low,High" bitfld.long 0x00 21. " SPIS213 ,SPI Status Bit 213" "Low,High" bitfld.long 0x00 20. " SPIS212 ,SPI Status Bit 212" "Low,High" textline " " bitfld.long 0x00 19. " SPIS211 ,SPI Status Bit 211" "Low,High" bitfld.long 0x00 18. " SPIS210 ,SPI Status Bit 210" "Low,High" bitfld.long 0x00 17. " SPIS209 ,SPI Status Bit 209" "Low,High" textline " " bitfld.long 0x00 16. " SPIS208 ,SPI Status Bit 208" "Low,High" bitfld.long 0x00 15. " SPIS207 ,SPI Status Bit 207" "Low,High" bitfld.long 0x00 14. " SPIS206 ,SPI Status Bit 206" "Low,High" textline " " bitfld.long 0x00 13. " SPIS205 ,SPI Status Bit 205" "Low,High" bitfld.long 0x00 12. " SPIS204 ,SPI Status Bit 204" "Low,High" bitfld.long 0x00 11. " SPIS203 ,SPI Status Bit 203" "Low,High" textline " " bitfld.long 0x00 10. " SPIS202 ,SPI Status Bit 202" "Low,High" bitfld.long 0x00 9. " SPIS201 ,SPI Status Bit 201" "Low,High" bitfld.long 0x00 8. " SPIS200 ,SPI Status Bit 200" "Low,High" textline " " bitfld.long 0x00 7. " SPIS199 ,SPI Status Bit 199" "Low,High" bitfld.long 0x00 6. " SPIS198 ,SPI Status Bit 198" "Low,High" bitfld.long 0x00 5. " SPIS197 ,SPI Status Bit 197" "Low,High" textline " " bitfld.long 0x00 4. " SPIS196 ,SPI Status Bit 196" "Low,High" bitfld.long 0x00 3. " SPIS195 ,SPI Status Bit 195" "Low,High" bitfld.long 0x00 2. " SPIS194 ,SPI Status Bit 194" "Low,High" textline " " bitfld.long 0x00 1. " SPIS193 ,SPI Status Bit 193" "Low,High" bitfld.long 0x00 0. " SPIS192 ,SPI Status Bit 192" "Low,High" else hgroup.long 0xC098++0x03 hide.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07) rgroup.long 0xC09C++0x03 line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" bitfld.long 0x00 31. " SPIS255 ,SPI Status Bit 255" "Low,High" bitfld.long 0x00 30. " SPIS254 ,SPI Status Bit 254" "Low,High" bitfld.long 0x00 29. " SPIS253 ,SPI Status Bit 253" "Low,High" textline " " bitfld.long 0x00 28. " SPIS252 ,SPI Status Bit 252" "Low,High" bitfld.long 0x00 27. " SPIS251 ,SPI Status Bit 251" "Low,High" bitfld.long 0x00 26. " SPIS250 ,SPI Status Bit 250" "Low,High" textline " " bitfld.long 0x00 25. " SPIS249 ,SPI Status Bit 249" "Low,High" bitfld.long 0x00 24. " SPIS248 ,SPI Status Bit 248" "Low,High" bitfld.long 0x00 23. " SPIS247 ,SPI Status Bit 247" "Low,High" textline " " bitfld.long 0x00 22. " SPIS246 ,SPI Status Bit 246" "Low,High" bitfld.long 0x00 21. " SPIS245 ,SPI Status Bit 245" "Low,High" bitfld.long 0x00 20. " SPIS244 ,SPI Status Bit 244" "Low,High" textline " " bitfld.long 0x00 19. " SPIS243 ,SPI Status Bit 243" "Low,High" bitfld.long 0x00 18. " SPIS242 ,SPI Status Bit 242" "Low,High" bitfld.long 0x00 17. " SPIS241 ,SPI Status Bit 241" "Low,High" textline " " bitfld.long 0x00 16. " SPIS240 ,SPI Status Bit 240" "Low,High" bitfld.long 0x00 15. " SPIS239 ,SPI Status Bit 239" "Low,High" bitfld.long 0x00 14. " SPIS238 ,SPI Status Bit 238" "Low,High" textline " " bitfld.long 0x00 13. " SPIS237 ,SPI Status Bit 237" "Low,High" bitfld.long 0x00 12. " SPIS236 ,SPI Status Bit 236" "Low,High" bitfld.long 0x00 11. " SPIS235 ,SPI Status Bit 235" "Low,High" textline " " bitfld.long 0x00 10. " SPIS234 ,SPI Status Bit 234" "Low,High" bitfld.long 0x00 9. " SPIS233 ,SPI Status Bit 233" "Low,High" bitfld.long 0x00 8. " SPIS232 ,SPI Status Bit 232" "Low,High" textline " " bitfld.long 0x00 7. " SPIS231 ,SPI Status Bit 231" "Low,High" bitfld.long 0x00 6. " SPIS230 ,SPI Status Bit 230" "Low,High" bitfld.long 0x00 5. " SPIS229 ,SPI Status Bit 229" "Low,High" textline " " bitfld.long 0x00 4. " SPIS228 ,SPI Status Bit 228" "Low,High" bitfld.long 0x00 3. " SPIS227 ,SPI Status Bit 227" "Low,High" bitfld.long 0x00 2. " SPIS226 ,SPI Status Bit 226" "Low,High" textline " " bitfld.long 0x00 1. " SPIS225 ,SPI Status Bit 225" "Low,High" bitfld.long 0x00 0. " SPIS224 ,SPI Status Bit 224" "Low,High" else hgroup.long 0xC09C++0x03 hide.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08) rgroup.long 0xC0A0++0x03 line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" bitfld.long 0x00 31. " SPIS287 ,SPI Status Bit 287" "Low,High" bitfld.long 0x00 30. " SPIS286 ,SPI Status Bit 286" "Low,High" bitfld.long 0x00 29. " SPIS285 ,SPI Status Bit 285" "Low,High" textline " " bitfld.long 0x00 28. " SPIS284 ,SPI Status Bit 284" "Low,High" bitfld.long 0x00 27. " SPIS283 ,SPI Status Bit 283" "Low,High" bitfld.long 0x00 26. " SPIS282 ,SPI Status Bit 282" "Low,High" textline " " bitfld.long 0x00 25. " SPIS281 ,SPI Status Bit 281" "Low,High" bitfld.long 0x00 24. " SPIS280 ,SPI Status Bit 280" "Low,High" bitfld.long 0x00 23. " SPIS279 ,SPI Status Bit 279" "Low,High" textline " " bitfld.long 0x00 22. " SPIS278 ,SPI Status Bit 278" "Low,High" bitfld.long 0x00 21. " SPIS277 ,SPI Status Bit 277" "Low,High" bitfld.long 0x00 20. " SPIS276 ,SPI Status Bit 276" "Low,High" textline " " bitfld.long 0x00 19. " SPIS275 ,SPI Status Bit 275" "Low,High" bitfld.long 0x00 18. " SPIS274 ,SPI Status Bit 274" "Low,High" bitfld.long 0x00 17. " SPIS273 ,SPI Status Bit 273" "Low,High" textline " " bitfld.long 0x00 16. " SPIS272 ,SPI Status Bit 272" "Low,High" bitfld.long 0x00 15. " SPIS271 ,SPI Status Bit 271" "Low,High" bitfld.long 0x00 14. " SPIS270 ,SPI Status Bit 270" "Low,High" textline " " bitfld.long 0x00 13. " SPIS269 ,SPI Status Bit 269" "Low,High" bitfld.long 0x00 12. " SPIS268 ,SPI Status Bit 268" "Low,High" bitfld.long 0x00 11. " SPIS267 ,SPI Status Bit 267" "Low,High" textline " " bitfld.long 0x00 10. " SPIS266 ,SPI Status Bit 266" "Low,High" bitfld.long 0x00 9. " SPIS265 ,SPI Status Bit 265" "Low,High" bitfld.long 0x00 8. " SPIS264 ,SPI Status Bit 264" "Low,High" textline " " bitfld.long 0x00 7. " SPIS263 ,SPI Status Bit 263" "Low,High" bitfld.long 0x00 6. " SPIS262 ,SPI Status Bit 262" "Low,High" bitfld.long 0x00 5. " SPIS261 ,SPI Status Bit 261" "Low,High" textline " " bitfld.long 0x00 4. " SPIS260 ,SPI Status Bit 260" "Low,High" bitfld.long 0x00 3. " SPIS259 ,SPI Status Bit 259" "Low,High" bitfld.long 0x00 2. " SPIS258 ,SPI Status Bit 258" "Low,High" textline " " bitfld.long 0x00 1. " SPIS257 ,SPI Status Bit 257" "Low,High" bitfld.long 0x00 0. " SPIS256 ,SPI Status Bit 256" "Low,High" else hgroup.long 0xC0A0++0x03 hide.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09) rgroup.long 0xC0A4++0x03 line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" bitfld.long 0x00 31. " SPIS319 ,SPI Status Bit 319" "Low,High" bitfld.long 0x00 30. " SPIS318 ,SPI Status Bit 318" "Low,High" bitfld.long 0x00 29. " SPIS317 ,SPI Status Bit 317" "Low,High" textline " " bitfld.long 0x00 28. " SPIS316 ,SPI Status Bit 316" "Low,High" bitfld.long 0x00 27. " SPIS315 ,SPI Status Bit 315" "Low,High" bitfld.long 0x00 26. " SPIS314 ,SPI Status Bit 314" "Low,High" textline " " bitfld.long 0x00 25. " SPIS313 ,SPI Status Bit 313" "Low,High" bitfld.long 0x00 24. " SPIS312 ,SPI Status Bit 312" "Low,High" bitfld.long 0x00 23. " SPIS311 ,SPI Status Bit 311" "Low,High" textline " " bitfld.long 0x00 22. " SPIS310 ,SPI Status Bit 310" "Low,High" bitfld.long 0x00 21. " SPIS309 ,SPI Status Bit 309" "Low,High" bitfld.long 0x00 20. " SPIS308 ,SPI Status Bit 308" "Low,High" textline " " bitfld.long 0x00 19. " SPIS307 ,SPI Status Bit 307" "Low,High" bitfld.long 0x00 18. " SPIS306 ,SPI Status Bit 306" "Low,High" bitfld.long 0x00 17. " SPIS305 ,SPI Status Bit 305" "Low,High" textline " " bitfld.long 0x00 16. " SPIS304 ,SPI Status Bit 304" "Low,High" bitfld.long 0x00 15. " SPIS303 ,SPI Status Bit 303" "Low,High" bitfld.long 0x00 14. " SPIS302 ,SPI Status Bit 302" "Low,High" textline " " bitfld.long 0x00 13. " SPIS301 ,SPI Status Bit 301" "Low,High" bitfld.long 0x00 12. " SPIS300 ,SPI Status Bit 300" "Low,High" bitfld.long 0x00 11. " SPIS299 ,SPI Status Bit 299" "Low,High" textline " " bitfld.long 0x00 10. " SPIS298 ,SPI Status Bit 298" "Low,High" bitfld.long 0x00 9. " SPIS297 ,SPI Status Bit 297" "Low,High" bitfld.long 0x00 8. " SPIS296 ,SPI Status Bit 296" "Low,High" textline " " bitfld.long 0x00 7. " SPIS295 ,SPI Status Bit 295" "Low,High" bitfld.long 0x00 6. " SPIS294 ,SPI Status Bit 294" "Low,High" bitfld.long 0x00 5. " SPIS293 ,SPI Status Bit 293" "Low,High" textline " " bitfld.long 0x00 4. " SPIS292 ,SPI Status Bit 292" "Low,High" bitfld.long 0x00 3. " SPIS291 ,SPI Status Bit 291" "Low,High" bitfld.long 0x00 2. " SPIS290 ,SPI Status Bit 290" "Low,High" textline " " bitfld.long 0x00 1. " SPIS289 ,SPI Status Bit 289" "Low,High" bitfld.long 0x00 0. " SPIS288 ,SPI Status Bit 288" "Low,High" else hgroup.long 0xC0A4++0x03 hide.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A) rgroup.long 0xC0A8++0x03 line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" bitfld.long 0x00 31. " SPIS351 ,SPI Status Bit 351" "Low,High" bitfld.long 0x00 30. " SPIS350 ,SPI Status Bit 350" "Low,High" bitfld.long 0x00 29. " SPIS349 ,SPI Status Bit 349" "Low,High" textline " " bitfld.long 0x00 28. " SPIS348 ,SPI Status Bit 348" "Low,High" bitfld.long 0x00 27. " SPIS347 ,SPI Status Bit 347" "Low,High" bitfld.long 0x00 26. " SPIS346 ,SPI Status Bit 346" "Low,High" textline " " bitfld.long 0x00 25. " SPIS345 ,SPI Status Bit 345" "Low,High" bitfld.long 0x00 24. " SPIS344 ,SPI Status Bit 344" "Low,High" bitfld.long 0x00 23. " SPIS343 ,SPI Status Bit 343" "Low,High" textline " " bitfld.long 0x00 22. " SPIS342 ,SPI Status Bit 342" "Low,High" bitfld.long 0x00 21. " SPIS341 ,SPI Status Bit 341" "Low,High" bitfld.long 0x00 20. " SPIS340 ,SPI Status Bit 340" "Low,High" textline " " bitfld.long 0x00 19. " SPIS339 ,SPI Status Bit 339" "Low,High" bitfld.long 0x00 18. " SPIS338 ,SPI Status Bit 338" "Low,High" bitfld.long 0x00 17. " SPIS337 ,SPI Status Bit 337" "Low,High" textline " " bitfld.long 0x00 16. " SPIS336 ,SPI Status Bit 336" "Low,High" bitfld.long 0x00 15. " SPIS335 ,SPI Status Bit 335" "Low,High" bitfld.long 0x00 14. " SPIS334 ,SPI Status Bit 334" "Low,High" textline " " bitfld.long 0x00 13. " SPIS333 ,SPI Status Bit 333" "Low,High" bitfld.long 0x00 12. " SPIS332 ,SPI Status Bit 332" "Low,High" bitfld.long 0x00 11. " SPIS331 ,SPI Status Bit 331" "Low,High" textline " " bitfld.long 0x00 10. " SPIS330 ,SPI Status Bit 330" "Low,High" bitfld.long 0x00 9. " SPIS329 ,SPI Status Bit 329" "Low,High" bitfld.long 0x00 8. " SPIS328 ,SPI Status Bit 328" "Low,High" textline " " bitfld.long 0x00 7. " SPIS327 ,SPI Status Bit 327" "Low,High" bitfld.long 0x00 6. " SPIS326 ,SPI Status Bit 326" "Low,High" bitfld.long 0x00 5. " SPIS325 ,SPI Status Bit 325" "Low,High" textline " " bitfld.long 0x00 4. " SPIS324 ,SPI Status Bit 324" "Low,High" bitfld.long 0x00 3. " SPIS323 ,SPI Status Bit 323" "Low,High" bitfld.long 0x00 2. " SPIS322 ,SPI Status Bit 322" "Low,High" textline " " bitfld.long 0x00 1. " SPIS321 ,SPI Status Bit 321" "Low,High" bitfld.long 0x00 0. " SPIS320 ,SPI Status Bit 320" "Low,High" else hgroup.long 0xC0A8++0x03 hide.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B) rgroup.long 0xC0AC++0x03 line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" bitfld.long 0x00 31. " SPIS383 ,SPI Status Bit 383" "Low,High" bitfld.long 0x00 30. " SPIS382 ,SPI Status Bit 382" "Low,High" bitfld.long 0x00 29. " SPIS381 ,SPI Status Bit 381" "Low,High" textline " " bitfld.long 0x00 28. " SPIS380 ,SPI Status Bit 380" "Low,High" bitfld.long 0x00 27. " SPIS379 ,SPI Status Bit 379" "Low,High" bitfld.long 0x00 26. " SPIS378 ,SPI Status Bit 378" "Low,High" textline " " bitfld.long 0x00 25. " SPIS377 ,SPI Status Bit 377" "Low,High" bitfld.long 0x00 24. " SPIS376 ,SPI Status Bit 376" "Low,High" bitfld.long 0x00 23. " SPIS375 ,SPI Status Bit 375" "Low,High" textline " " bitfld.long 0x00 22. " SPIS374 ,SPI Status Bit 374" "Low,High" bitfld.long 0x00 21. " SPIS373 ,SPI Status Bit 373" "Low,High" bitfld.long 0x00 20. " SPIS372 ,SPI Status Bit 372" "Low,High" textline " " bitfld.long 0x00 19. " SPIS371 ,SPI Status Bit 371" "Low,High" bitfld.long 0x00 18. " SPIS370 ,SPI Status Bit 370" "Low,High" bitfld.long 0x00 17. " SPIS369 ,SPI Status Bit 369" "Low,High" textline " " bitfld.long 0x00 16. " SPIS368 ,SPI Status Bit 368" "Low,High" bitfld.long 0x00 15. " SPIS367 ,SPI Status Bit 367" "Low,High" bitfld.long 0x00 14. " SPIS366 ,SPI Status Bit 366" "Low,High" textline " " bitfld.long 0x00 13. " SPIS365 ,SPI Status Bit 365" "Low,High" bitfld.long 0x00 12. " SPIS364 ,SPI Status Bit 364" "Low,High" bitfld.long 0x00 11. " SPIS363 ,SPI Status Bit 363" "Low,High" textline " " bitfld.long 0x00 10. " SPIS362 ,SPI Status Bit 362" "Low,High" bitfld.long 0x00 9. " SPIS361 ,SPI Status Bit 361" "Low,High" bitfld.long 0x00 8. " SPIS360 ,SPI Status Bit 360" "Low,High" textline " " bitfld.long 0x00 7. " SPIS359 ,SPI Status Bit 359" "Low,High" bitfld.long 0x00 6. " SPIS358 ,SPI Status Bit 358" "Low,High" bitfld.long 0x00 5. " SPIS357 ,SPI Status Bit 357" "Low,High" textline " " bitfld.long 0x00 4. " SPIS356 ,SPI Status Bit 356" "Low,High" bitfld.long 0x00 3. " SPIS355 ,SPI Status Bit 355" "Low,High" bitfld.long 0x00 2. " SPIS354 ,SPI Status Bit 354" "Low,High" textline " " bitfld.long 0x00 1. " SPIS353 ,SPI Status Bit 353" "Low,High" bitfld.long 0x00 0. " SPIS352 ,SPI Status Bit 352" "Low,High" else hgroup.long 0xC0AC++0x03 hide.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C) rgroup.long 0xC0B0++0x03 line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" bitfld.long 0x00 31. " SPIS415 ,SPI Status Bit 415" "Low,High" bitfld.long 0x00 30. " SPIS414 ,SPI Status Bit 414" "Low,High" bitfld.long 0x00 29. " SPIS413 ,SPI Status Bit 413" "Low,High" textline " " bitfld.long 0x00 28. " SPIS412 ,SPI Status Bit 412" "Low,High" bitfld.long 0x00 27. " SPIS411 ,SPI Status Bit 411" "Low,High" bitfld.long 0x00 26. " SPIS410 ,SPI Status Bit 410" "Low,High" textline " " bitfld.long 0x00 25. " SPIS409 ,SPI Status Bit 409" "Low,High" bitfld.long 0x00 24. " SPIS408 ,SPI Status Bit 408" "Low,High" bitfld.long 0x00 23. " SPIS407 ,SPI Status Bit 407" "Low,High" textline " " bitfld.long 0x00 22. " SPIS406 ,SPI Status Bit 406" "Low,High" bitfld.long 0x00 21. " SPIS405 ,SPI Status Bit 405" "Low,High" bitfld.long 0x00 20. " SPIS404 ,SPI Status Bit 404" "Low,High" textline " " bitfld.long 0x00 19. " SPIS403 ,SPI Status Bit 403" "Low,High" bitfld.long 0x00 18. " SPIS402 ,SPI Status Bit 402" "Low,High" bitfld.long 0x00 17. " SPIS401 ,SPI Status Bit 401" "Low,High" textline " " bitfld.long 0x00 16. " SPIS400 ,SPI Status Bit 400" "Low,High" bitfld.long 0x00 15. " SPIS399 ,SPI Status Bit 399" "Low,High" bitfld.long 0x00 14. " SPIS398 ,SPI Status Bit 398" "Low,High" textline " " bitfld.long 0x00 13. " SPIS397 ,SPI Status Bit 397" "Low,High" bitfld.long 0x00 12. " SPIS396 ,SPI Status Bit 396" "Low,High" bitfld.long 0x00 11. " SPIS395 ,SPI Status Bit 395" "Low,High" textline " " bitfld.long 0x00 10. " SPIS394 ,SPI Status Bit 394" "Low,High" bitfld.long 0x00 9. " SPIS393 ,SPI Status Bit 393" "Low,High" bitfld.long 0x00 8. " SPIS392 ,SPI Status Bit 392" "Low,High" textline " " bitfld.long 0x00 7. " SPIS391 ,SPI Status Bit 391" "Low,High" bitfld.long 0x00 6. " SPIS390 ,SPI Status Bit 390" "Low,High" bitfld.long 0x00 5. " SPIS389 ,SPI Status Bit 389" "Low,High" textline " " bitfld.long 0x00 4. " SPIS388 ,SPI Status Bit 388" "Low,High" bitfld.long 0x00 3. " SPIS387 ,SPI Status Bit 387" "Low,High" bitfld.long 0x00 2. " SPIS386 ,SPI Status Bit 386" "Low,High" textline " " bitfld.long 0x00 1. " SPIS385 ,SPI Status Bit 385" "Low,High" bitfld.long 0x00 0. " SPIS384 ,SPI Status Bit 384" "Low,High" else hgroup.long 0xC0B0++0x03 hide.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D) rgroup.long 0xC0B4++0x03 line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" bitfld.long 0x00 31. " SPIS447 ,SPI Status Bit 447" "Low,High" bitfld.long 0x00 30. " SPIS446 ,SPI Status Bit 446" "Low,High" bitfld.long 0x00 29. " SPIS445 ,SPI Status Bit 445" "Low,High" textline " " bitfld.long 0x00 28. " SPIS444 ,SPI Status Bit 444" "Low,High" bitfld.long 0x00 27. " SPIS443 ,SPI Status Bit 443" "Low,High" bitfld.long 0x00 26. " SPIS442 ,SPI Status Bit 442" "Low,High" textline " " bitfld.long 0x00 25. " SPIS441 ,SPI Status Bit 441" "Low,High" bitfld.long 0x00 24. " SPIS440 ,SPI Status Bit 440" "Low,High" bitfld.long 0x00 23. " SPIS439 ,SPI Status Bit 439" "Low,High" textline " " bitfld.long 0x00 22. " SPIS438 ,SPI Status Bit 438" "Low,High" bitfld.long 0x00 21. " SPIS437 ,SPI Status Bit 437" "Low,High" bitfld.long 0x00 20. " SPIS436 ,SPI Status Bit 436" "Low,High" textline " " bitfld.long 0x00 19. " SPIS435 ,SPI Status Bit 435" "Low,High" bitfld.long 0x00 18. " SPIS434 ,SPI Status Bit 434" "Low,High" bitfld.long 0x00 17. " SPIS433 ,SPI Status Bit 433" "Low,High" textline " " bitfld.long 0x00 16. " SPIS432 ,SPI Status Bit 432" "Low,High" bitfld.long 0x00 15. " SPIS431 ,SPI Status Bit 431" "Low,High" bitfld.long 0x00 14. " SPIS430 ,SPI Status Bit 430" "Low,High" textline " " bitfld.long 0x00 13. " SPIS429 ,SPI Status Bit 429" "Low,High" bitfld.long 0x00 12. " SPIS428 ,SPI Status Bit 428" "Low,High" bitfld.long 0x00 11. " SPIS427 ,SPI Status Bit 427" "Low,High" textline " " bitfld.long 0x00 10. " SPIS426 ,SPI Status Bit 426" "Low,High" bitfld.long 0x00 9. " SPIS425 ,SPI Status Bit 425" "Low,High" bitfld.long 0x00 8. " SPIS424 ,SPI Status Bit 424" "Low,High" textline " " bitfld.long 0x00 7. " SPIS423 ,SPI Status Bit 423" "Low,High" bitfld.long 0x00 6. " SPIS422 ,SPI Status Bit 422" "Low,High" bitfld.long 0x00 5. " SPIS421 ,SPI Status Bit 421" "Low,High" textline " " bitfld.long 0x00 4. " SPIS420 ,SPI Status Bit 420" "Low,High" bitfld.long 0x00 3. " SPIS419 ,SPI Status Bit 419" "Low,High" bitfld.long 0x00 2. " SPIS418 ,SPI Status Bit 418" "Low,High" textline " " bitfld.long 0x00 1. " SPIS417 ,SPI Status Bit 417" "Low,High" bitfld.long 0x00 0. " SPIS416 ,SPI Status Bit 416" "Low,High" else hgroup.long 0xC0B4++0x03 hide.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E) rgroup.long 0xC0B8++0x03 line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" bitfld.long 0x00 31. " SPIS479 ,SPI Status Bit 479" "Low,High" bitfld.long 0x00 30. " SPIS478 ,SPI Status Bit 478" "Low,High" bitfld.long 0x00 29. " SPIS477 ,SPI Status Bit 477" "Low,High" textline " " bitfld.long 0x00 28. " SPIS476 ,SPI Status Bit 476" "Low,High" bitfld.long 0x00 27. " SPIS475 ,SPI Status Bit 475" "Low,High" bitfld.long 0x00 26. " SPIS474 ,SPI Status Bit 474" "Low,High" textline " " bitfld.long 0x00 25. " SPIS473 ,SPI Status Bit 473" "Low,High" bitfld.long 0x00 24. " SPIS472 ,SPI Status Bit 472" "Low,High" bitfld.long 0x00 23. " SPIS471 ,SPI Status Bit 471" "Low,High" textline " " bitfld.long 0x00 22. " SPIS470 ,SPI Status Bit 470" "Low,High" bitfld.long 0x00 21. " SPIS469 ,SPI Status Bit 469" "Low,High" bitfld.long 0x00 20. " SPIS468 ,SPI Status Bit 468" "Low,High" textline " " bitfld.long 0x00 19. " SPIS467 ,SPI Status Bit 467" "Low,High" bitfld.long 0x00 18. " SPIS466 ,SPI Status Bit 466" "Low,High" bitfld.long 0x00 17. " SPIS465 ,SPI Status Bit 465" "Low,High" textline " " bitfld.long 0x00 16. " SPIS464 ,SPI Status Bit 464" "Low,High" bitfld.long 0x00 15. " SPIS463 ,SPI Status Bit 463" "Low,High" bitfld.long 0x00 14. " SPIS462 ,SPI Status Bit 462" "Low,High" textline " " bitfld.long 0x00 13. " SPIS461 ,SPI Status Bit 461" "Low,High" bitfld.long 0x00 12. " SPIS460 ,SPI Status Bit 460" "Low,High" bitfld.long 0x00 11. " SPIS459 ,SPI Status Bit 459" "Low,High" textline " " bitfld.long 0x00 10. " SPIS458 ,SPI Status Bit 458" "Low,High" bitfld.long 0x00 9. " SPIS457 ,SPI Status Bit 457" "Low,High" bitfld.long 0x00 8. " SPIS456 ,SPI Status Bit 456" "Low,High" textline " " bitfld.long 0x00 7. " SPIS455 ,SPI Status Bit 455" "Low,High" bitfld.long 0x00 6. " SPIS454 ,SPI Status Bit 454" "Low,High" bitfld.long 0x00 5. " SPIS453 ,SPI Status Bit 453" "Low,High" textline " " bitfld.long 0x00 4. " SPIS452 ,SPI Status Bit 452" "Low,High" bitfld.long 0x00 3. " SPIS451 ,SPI Status Bit 451" "Low,High" bitfld.long 0x00 2. " SPIS450 ,SPI Status Bit 450" "Low,High" textline " " bitfld.long 0x00 1. " SPIS449 ,SPI Status Bit 449" "Low,High" bitfld.long 0x00 0. " SPIS448 ,SPI Status Bit 448" "Low,High" else hgroup.long 0xC0B8++0x03 hide.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F) rgroup.long 0xC0BC++0x03 line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" bitfld.long 0x00 31. " SPIS511 ,SPI Status Bit 511" "Low,High" bitfld.long 0x00 30. " SPIS510 ,SPI Status Bit 510" "Low,High" bitfld.long 0x00 29. " SPIS509 ,SPI Status Bit 509" "Low,High" textline " " bitfld.long 0x00 28. " SPIS508 ,SPI Status Bit 508" "Low,High" bitfld.long 0x00 27. " SPIS507 ,SPI Status Bit 507" "Low,High" bitfld.long 0x00 26. " SPIS506 ,SPI Status Bit 506" "Low,High" textline " " bitfld.long 0x00 25. " SPIS505 ,SPI Status Bit 505" "Low,High" bitfld.long 0x00 24. " SPIS504 ,SPI Status Bit 504" "Low,High" bitfld.long 0x00 23. " SPIS503 ,SPI Status Bit 503" "Low,High" textline " " bitfld.long 0x00 22. " SPIS502 ,SPI Status Bit 502" "Low,High" bitfld.long 0x00 21. " SPIS501 ,SPI Status Bit 501" "Low,High" bitfld.long 0x00 20. " SPIS500 ,SPI Status Bit 500" "Low,High" textline " " bitfld.long 0x00 19. " SPIS499 ,SPI Status Bit 499" "Low,High" bitfld.long 0x00 18. " SPIS498 ,SPI Status Bit 498" "Low,High" bitfld.long 0x00 17. " SPIS497 ,SPI Status Bit 497" "Low,High" textline " " bitfld.long 0x00 16. " SPIS496 ,SPI Status Bit 496" "Low,High" bitfld.long 0x00 15. " SPIS495 ,SPI Status Bit 495" "Low,High" bitfld.long 0x00 14. " SPIS494 ,SPI Status Bit 494" "Low,High" textline " " bitfld.long 0x00 13. " SPIS493 ,SPI Status Bit 493" "Low,High" bitfld.long 0x00 12. " SPIS492 ,SPI Status Bit 492" "Low,High" bitfld.long 0x00 11. " SPIS491 ,SPI Status Bit 491" "Low,High" textline " " bitfld.long 0x00 10. " SPIS490 ,SPI Status Bit 490" "Low,High" bitfld.long 0x00 9. " SPIS489 ,SPI Status Bit 489" "Low,High" bitfld.long 0x00 8. " SPIS488 ,SPI Status Bit 488" "Low,High" textline " " bitfld.long 0x00 7. " SPIS487 ,SPI Status Bit 487" "Low,High" bitfld.long 0x00 6. " SPIS486 ,SPI Status Bit 486" "Low,High" bitfld.long 0x00 5. " SPIS485 ,SPI Status Bit 485" "Low,High" textline " " bitfld.long 0x00 4. " SPIS484 ,SPI Status Bit 484" "Low,High" bitfld.long 0x00 3. " SPIS483 ,SPI Status Bit 483" "Low,High" bitfld.long 0x00 2. " SPIS482 ,SPI Status Bit 482" "Low,High" textline " " bitfld.long 0x00 1. " SPIS481 ,SPI Status Bit 481" "Low,High" bitfld.long 0x00 0. " SPIS480 ,SPI Status Bit 480" "Low,High" else hgroup.long 0xC0BC++0x03 hide.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10) rgroup.long 0xC0C0++0x03 line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" bitfld.long 0x00 31. " SPIS543 ,SPI Status Bit 543" "Low,High" bitfld.long 0x00 30. " SPIS542 ,SPI Status Bit 542" "Low,High" bitfld.long 0x00 29. " SPIS541 ,SPI Status Bit 541" "Low,High" textline " " bitfld.long 0x00 28. " SPIS540 ,SPI Status Bit 540" "Low,High" bitfld.long 0x00 27. " SPIS539 ,SPI Status Bit 539" "Low,High" bitfld.long 0x00 26. " SPIS538 ,SPI Status Bit 538" "Low,High" textline " " bitfld.long 0x00 25. " SPIS537 ,SPI Status Bit 537" "Low,High" bitfld.long 0x00 24. " SPIS536 ,SPI Status Bit 536" "Low,High" bitfld.long 0x00 23. " SPIS535 ,SPI Status Bit 535" "Low,High" textline " " bitfld.long 0x00 22. " SPIS534 ,SPI Status Bit 534" "Low,High" bitfld.long 0x00 21. " SPIS533 ,SPI Status Bit 533" "Low,High" bitfld.long 0x00 20. " SPIS532 ,SPI Status Bit 532" "Low,High" textline " " bitfld.long 0x00 19. " SPIS531 ,SPI Status Bit 531" "Low,High" bitfld.long 0x00 18. " SPIS530 ,SPI Status Bit 530" "Low,High" bitfld.long 0x00 17. " SPIS529 ,SPI Status Bit 529" "Low,High" textline " " bitfld.long 0x00 16. " SPIS528 ,SPI Status Bit 528" "Low,High" bitfld.long 0x00 15. " SPIS527 ,SPI Status Bit 527" "Low,High" bitfld.long 0x00 14. " SPIS526 ,SPI Status Bit 526" "Low,High" textline " " bitfld.long 0x00 13. " SPIS525 ,SPI Status Bit 525" "Low,High" bitfld.long 0x00 12. " SPIS524 ,SPI Status Bit 524" "Low,High" bitfld.long 0x00 11. " SPIS523 ,SPI Status Bit 523" "Low,High" textline " " bitfld.long 0x00 10. " SPIS522 ,SPI Status Bit 522" "Low,High" bitfld.long 0x00 9. " SPIS521 ,SPI Status Bit 521" "Low,High" bitfld.long 0x00 8. " SPIS520 ,SPI Status Bit 520" "Low,High" textline " " bitfld.long 0x00 7. " SPIS519 ,SPI Status Bit 519" "Low,High" bitfld.long 0x00 6. " SPIS518 ,SPI Status Bit 518" "Low,High" bitfld.long 0x00 5. " SPIS517 ,SPI Status Bit 517" "Low,High" textline " " bitfld.long 0x00 4. " SPIS516 ,SPI Status Bit 516" "Low,High" bitfld.long 0x00 3. " SPIS515 ,SPI Status Bit 515" "Low,High" bitfld.long 0x00 2. " SPIS514 ,SPI Status Bit 514" "Low,High" textline " " bitfld.long 0x00 1. " SPIS513 ,SPI Status Bit 513" "Low,High" bitfld.long 0x00 0. " SPIS512 ,SPI Status Bit 512" "Low,High" else hgroup.long 0xC0C0++0x03 hide.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11) rgroup.long 0xC0C4++0x03 line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" bitfld.long 0x00 31. " SPIS575 ,SPI Status Bit 575" "Low,High" bitfld.long 0x00 30. " SPIS574 ,SPI Status Bit 574" "Low,High" bitfld.long 0x00 29. " SPIS573 ,SPI Status Bit 573" "Low,High" textline " " bitfld.long 0x00 28. " SPIS572 ,SPI Status Bit 572" "Low,High" bitfld.long 0x00 27. " SPIS571 ,SPI Status Bit 571" "Low,High" bitfld.long 0x00 26. " SPIS570 ,SPI Status Bit 570" "Low,High" textline " " bitfld.long 0x00 25. " SPIS569 ,SPI Status Bit 569" "Low,High" bitfld.long 0x00 24. " SPIS568 ,SPI Status Bit 568" "Low,High" bitfld.long 0x00 23. " SPIS567 ,SPI Status Bit 567" "Low,High" textline " " bitfld.long 0x00 22. " SPIS566 ,SPI Status Bit 566" "Low,High" bitfld.long 0x00 21. " SPIS565 ,SPI Status Bit 565" "Low,High" bitfld.long 0x00 20. " SPIS564 ,SPI Status Bit 564" "Low,High" textline " " bitfld.long 0x00 19. " SPIS563 ,SPI Status Bit 563" "Low,High" bitfld.long 0x00 18. " SPIS562 ,SPI Status Bit 562" "Low,High" bitfld.long 0x00 17. " SPIS561 ,SPI Status Bit 561" "Low,High" textline " " bitfld.long 0x00 16. " SPIS560 ,SPI Status Bit 560" "Low,High" bitfld.long 0x00 15. " SPIS559 ,SPI Status Bit 559" "Low,High" bitfld.long 0x00 14. " SPIS558 ,SPI Status Bit 558" "Low,High" textline " " bitfld.long 0x00 13. " SPIS557 ,SPI Status Bit 557" "Low,High" bitfld.long 0x00 12. " SPIS556 ,SPI Status Bit 556" "Low,High" bitfld.long 0x00 11. " SPIS555 ,SPI Status Bit 555" "Low,High" textline " " bitfld.long 0x00 10. " SPIS554 ,SPI Status Bit 554" "Low,High" bitfld.long 0x00 9. " SPIS553 ,SPI Status Bit 553" "Low,High" bitfld.long 0x00 8. " SPIS552 ,SPI Status Bit 552" "Low,High" textline " " bitfld.long 0x00 7. " SPIS551 ,SPI Status Bit 551" "Low,High" bitfld.long 0x00 6. " SPIS550 ,SPI Status Bit 550" "Low,High" bitfld.long 0x00 5. " SPIS549 ,SPI Status Bit 549" "Low,High" textline " " bitfld.long 0x00 4. " SPIS548 ,SPI Status Bit 548" "Low,High" bitfld.long 0x00 3. " SPIS547 ,SPI Status Bit 547" "Low,High" bitfld.long 0x00 2. " SPIS546 ,SPI Status Bit 546" "Low,High" textline " " bitfld.long 0x00 1. " SPIS545 ,SPI Status Bit 545" "Low,High" bitfld.long 0x00 0. " SPIS544 ,SPI Status Bit 544" "Low,High" else hgroup.long 0xC0C4++0x03 hide.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12) rgroup.long 0xC0C8++0x03 line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" bitfld.long 0x00 31. " SPIS607 ,SPI Status Bit 607" "Low,High" bitfld.long 0x00 30. " SPIS606 ,SPI Status Bit 606" "Low,High" bitfld.long 0x00 29. " SPIS605 ,SPI Status Bit 605" "Low,High" textline " " bitfld.long 0x00 28. " SPIS604 ,SPI Status Bit 604" "Low,High" bitfld.long 0x00 27. " SPIS603 ,SPI Status Bit 603" "Low,High" bitfld.long 0x00 26. " SPIS602 ,SPI Status Bit 602" "Low,High" textline " " bitfld.long 0x00 25. " SPIS601 ,SPI Status Bit 601" "Low,High" bitfld.long 0x00 24. " SPIS600 ,SPI Status Bit 600" "Low,High" bitfld.long 0x00 23. " SPIS599 ,SPI Status Bit 599" "Low,High" textline " " bitfld.long 0x00 22. " SPIS598 ,SPI Status Bit 598" "Low,High" bitfld.long 0x00 21. " SPIS597 ,SPI Status Bit 597" "Low,High" bitfld.long 0x00 20. " SPIS596 ,SPI Status Bit 596" "Low,High" textline " " bitfld.long 0x00 19. " SPIS595 ,SPI Status Bit 595" "Low,High" bitfld.long 0x00 18. " SPIS594 ,SPI Status Bit 594" "Low,High" bitfld.long 0x00 17. " SPIS593 ,SPI Status Bit 593" "Low,High" textline " " bitfld.long 0x00 16. " SPIS592 ,SPI Status Bit 592" "Low,High" bitfld.long 0x00 15. " SPIS591 ,SPI Status Bit 591" "Low,High" bitfld.long 0x00 14. " SPIS590 ,SPI Status Bit 590" "Low,High" textline " " bitfld.long 0x00 13. " SPIS589 ,SPI Status Bit 589" "Low,High" bitfld.long 0x00 12. " SPIS588 ,SPI Status Bit 588" "Low,High" bitfld.long 0x00 11. " SPIS587 ,SPI Status Bit 587" "Low,High" textline " " bitfld.long 0x00 10. " SPIS586 ,SPI Status Bit 586" "Low,High" bitfld.long 0x00 9. " SPIS585 ,SPI Status Bit 585" "Low,High" bitfld.long 0x00 8. " SPIS584 ,SPI Status Bit 584" "Low,High" textline " " bitfld.long 0x00 7. " SPIS583 ,SPI Status Bit 583" "Low,High" bitfld.long 0x00 6. " SPIS582 ,SPI Status Bit 582" "Low,High" bitfld.long 0x00 5. " SPIS581 ,SPI Status Bit 581" "Low,High" textline " " bitfld.long 0x00 4. " SPIS580 ,SPI Status Bit 580" "Low,High" bitfld.long 0x00 3. " SPIS579 ,SPI Status Bit 579" "Low,High" bitfld.long 0x00 2. " SPIS578 ,SPI Status Bit 578" "Low,High" textline " " bitfld.long 0x00 1. " SPIS577 ,SPI Status Bit 577" "Low,High" bitfld.long 0x00 0. " SPIS576 ,SPI Status Bit 576" "Low,High" else hgroup.long 0xC0C8++0x03 hide.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13) rgroup.long 0xC0CC++0x03 line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" bitfld.long 0x00 31. " SPIS639 ,SPI Status Bit 639" "Low,High" bitfld.long 0x00 30. " SPIS638 ,SPI Status Bit 638" "Low,High" bitfld.long 0x00 29. " SPIS637 ,SPI Status Bit 637" "Low,High" textline " " bitfld.long 0x00 28. " SPIS636 ,SPI Status Bit 636" "Low,High" bitfld.long 0x00 27. " SPIS635 ,SPI Status Bit 635" "Low,High" bitfld.long 0x00 26. " SPIS634 ,SPI Status Bit 634" "Low,High" textline " " bitfld.long 0x00 25. " SPIS633 ,SPI Status Bit 633" "Low,High" bitfld.long 0x00 24. " SPIS632 ,SPI Status Bit 632" "Low,High" bitfld.long 0x00 23. " SPIS631 ,SPI Status Bit 631" "Low,High" textline " " bitfld.long 0x00 22. " SPIS630 ,SPI Status Bit 630" "Low,High" bitfld.long 0x00 21. " SPIS629 ,SPI Status Bit 629" "Low,High" bitfld.long 0x00 20. " SPIS628 ,SPI Status Bit 628" "Low,High" textline " " bitfld.long 0x00 19. " SPIS627 ,SPI Status Bit 627" "Low,High" bitfld.long 0x00 18. " SPIS626 ,SPI Status Bit 626" "Low,High" bitfld.long 0x00 17. " SPIS625 ,SPI Status Bit 625" "Low,High" textline " " bitfld.long 0x00 16. " SPIS624 ,SPI Status Bit 624" "Low,High" bitfld.long 0x00 15. " SPIS623 ,SPI Status Bit 623" "Low,High" bitfld.long 0x00 14. " SPIS622 ,SPI Status Bit 622" "Low,High" textline " " bitfld.long 0x00 13. " SPIS621 ,SPI Status Bit 621" "Low,High" bitfld.long 0x00 12. " SPIS620 ,SPI Status Bit 620" "Low,High" bitfld.long 0x00 11. " SPIS619 ,SPI Status Bit 619" "Low,High" textline " " bitfld.long 0x00 10. " SPIS618 ,SPI Status Bit 618" "Low,High" bitfld.long 0x00 9. " SPIS617 ,SPI Status Bit 617" "Low,High" bitfld.long 0x00 8. " SPIS616 ,SPI Status Bit 616" "Low,High" textline " " bitfld.long 0x00 7. " SPIS615 ,SPI Status Bit 615" "Low,High" bitfld.long 0x00 6. " SPIS614 ,SPI Status Bit 614" "Low,High" bitfld.long 0x00 5. " SPIS613 ,SPI Status Bit 613" "Low,High" textline " " bitfld.long 0x00 4. " SPIS612 ,SPI Status Bit 612" "Low,High" bitfld.long 0x00 3. " SPIS611 ,SPI Status Bit 611" "Low,High" bitfld.long 0x00 2. " SPIS610 ,SPI Status Bit 610" "Low,High" textline " " bitfld.long 0x00 1. " SPIS609 ,SPI Status Bit 609" "Low,High" bitfld.long 0x00 0. " SPIS608 ,SPI Status Bit 608" "Low,High" else hgroup.long 0xC0CC++0x03 hide.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14) rgroup.long 0xC0D0++0x03 line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" bitfld.long 0x00 31. " SPIS671 ,SPI Status Bit 671" "Low,High" bitfld.long 0x00 30. " SPIS670 ,SPI Status Bit 670" "Low,High" bitfld.long 0x00 29. " SPIS669 ,SPI Status Bit 669" "Low,High" textline " " bitfld.long 0x00 28. " SPIS668 ,SPI Status Bit 668" "Low,High" bitfld.long 0x00 27. " SPIS667 ,SPI Status Bit 667" "Low,High" bitfld.long 0x00 26. " SPIS666 ,SPI Status Bit 666" "Low,High" textline " " bitfld.long 0x00 25. " SPIS665 ,SPI Status Bit 665" "Low,High" bitfld.long 0x00 24. " SPIS664 ,SPI Status Bit 664" "Low,High" bitfld.long 0x00 23. " SPIS663 ,SPI Status Bit 663" "Low,High" textline " " bitfld.long 0x00 22. " SPIS662 ,SPI Status Bit 662" "Low,High" bitfld.long 0x00 21. " SPIS661 ,SPI Status Bit 661" "Low,High" bitfld.long 0x00 20. " SPIS660 ,SPI Status Bit 660" "Low,High" textline " " bitfld.long 0x00 19. " SPIS659 ,SPI Status Bit 659" "Low,High" bitfld.long 0x00 18. " SPIS658 ,SPI Status Bit 658" "Low,High" bitfld.long 0x00 17. " SPIS657 ,SPI Status Bit 657" "Low,High" textline " " bitfld.long 0x00 16. " SPIS656 ,SPI Status Bit 656" "Low,High" bitfld.long 0x00 15. " SPIS655 ,SPI Status Bit 655" "Low,High" bitfld.long 0x00 14. " SPIS654 ,SPI Status Bit 654" "Low,High" textline " " bitfld.long 0x00 13. " SPIS653 ,SPI Status Bit 653" "Low,High" bitfld.long 0x00 12. " SPIS652 ,SPI Status Bit 652" "Low,High" bitfld.long 0x00 11. " SPIS651 ,SPI Status Bit 651" "Low,High" textline " " bitfld.long 0x00 10. " SPIS650 ,SPI Status Bit 650" "Low,High" bitfld.long 0x00 9. " SPIS649 ,SPI Status Bit 649" "Low,High" bitfld.long 0x00 8. " SPIS648 ,SPI Status Bit 648" "Low,High" textline " " bitfld.long 0x00 7. " SPIS647 ,SPI Status Bit 647" "Low,High" bitfld.long 0x00 6. " SPIS646 ,SPI Status Bit 646" "Low,High" bitfld.long 0x00 5. " SPIS645 ,SPI Status Bit 645" "Low,High" textline " " bitfld.long 0x00 4. " SPIS644 ,SPI Status Bit 644" "Low,High" bitfld.long 0x00 3. " SPIS643 ,SPI Status Bit 643" "Low,High" bitfld.long 0x00 2. " SPIS642 ,SPI Status Bit 642" "Low,High" textline " " bitfld.long 0x00 1. " SPIS641 ,SPI Status Bit 641" "Low,High" bitfld.long 0x00 0. " SPIS640 ,SPI Status Bit 640" "Low,High" else hgroup.long 0xC0D0++0x03 hide.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15) rgroup.long 0xC0D4++0x03 line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" bitfld.long 0x00 31. " SPIS703 ,SPI Status Bit 703" "Low,High" bitfld.long 0x00 30. " SPIS702 ,SPI Status Bit 702" "Low,High" bitfld.long 0x00 29. " SPIS701 ,SPI Status Bit 701" "Low,High" textline " " bitfld.long 0x00 28. " SPIS700 ,SPI Status Bit 700" "Low,High" bitfld.long 0x00 27. " SPIS699 ,SPI Status Bit 699" "Low,High" bitfld.long 0x00 26. " SPIS698 ,SPI Status Bit 698" "Low,High" textline " " bitfld.long 0x00 25. " SPIS697 ,SPI Status Bit 697" "Low,High" bitfld.long 0x00 24. " SPIS696 ,SPI Status Bit 696" "Low,High" bitfld.long 0x00 23. " SPIS695 ,SPI Status Bit 695" "Low,High" textline " " bitfld.long 0x00 22. " SPIS694 ,SPI Status Bit 694" "Low,High" bitfld.long 0x00 21. " SPIS693 ,SPI Status Bit 693" "Low,High" bitfld.long 0x00 20. " SPIS692 ,SPI Status Bit 692" "Low,High" textline " " bitfld.long 0x00 19. " SPIS691 ,SPI Status Bit 691" "Low,High" bitfld.long 0x00 18. " SPIS690 ,SPI Status Bit 690" "Low,High" bitfld.long 0x00 17. " SPIS689 ,SPI Status Bit 689" "Low,High" textline " " bitfld.long 0x00 16. " SPIS688 ,SPI Status Bit 688" "Low,High" bitfld.long 0x00 15. " SPIS687 ,SPI Status Bit 687" "Low,High" bitfld.long 0x00 14. " SPIS686 ,SPI Status Bit 686" "Low,High" textline " " bitfld.long 0x00 13. " SPIS685 ,SPI Status Bit 685" "Low,High" bitfld.long 0x00 12. " SPIS684 ,SPI Status Bit 684" "Low,High" bitfld.long 0x00 11. " SPIS683 ,SPI Status Bit 683" "Low,High" textline " " bitfld.long 0x00 10. " SPIS682 ,SPI Status Bit 682" "Low,High" bitfld.long 0x00 9. " SPIS681 ,SPI Status Bit 681" "Low,High" bitfld.long 0x00 8. " SPIS680 ,SPI Status Bit 680" "Low,High" textline " " bitfld.long 0x00 7. " SPIS679 ,SPI Status Bit 679" "Low,High" bitfld.long 0x00 6. " SPIS678 ,SPI Status Bit 678" "Low,High" bitfld.long 0x00 5. " SPIS677 ,SPI Status Bit 677" "Low,High" textline " " bitfld.long 0x00 4. " SPIS676 ,SPI Status Bit 676" "Low,High" bitfld.long 0x00 3. " SPIS675 ,SPI Status Bit 675" "Low,High" bitfld.long 0x00 2. " SPIS674 ,SPI Status Bit 674" "Low,High" textline " " bitfld.long 0x00 1. " SPIS673 ,SPI Status Bit 673" "Low,High" bitfld.long 0x00 0. " SPIS672 ,SPI Status Bit 672" "Low,High" else hgroup.long 0xC0D4++0x03 hide.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16) rgroup.long 0xC0D8++0x03 line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" bitfld.long 0x00 31. " SPIS735 ,SPI Status Bit 735" "Low,High" bitfld.long 0x00 30. " SPIS734 ,SPI Status Bit 734" "Low,High" bitfld.long 0x00 29. " SPIS733 ,SPI Status Bit 733" "Low,High" textline " " bitfld.long 0x00 28. " SPIS732 ,SPI Status Bit 732" "Low,High" bitfld.long 0x00 27. " SPIS731 ,SPI Status Bit 731" "Low,High" bitfld.long 0x00 26. " SPIS730 ,SPI Status Bit 730" "Low,High" textline " " bitfld.long 0x00 25. " SPIS729 ,SPI Status Bit 729" "Low,High" bitfld.long 0x00 24. " SPIS728 ,SPI Status Bit 728" "Low,High" bitfld.long 0x00 23. " SPIS727 ,SPI Status Bit 727" "Low,High" textline " " bitfld.long 0x00 22. " SPIS726 ,SPI Status Bit 726" "Low,High" bitfld.long 0x00 21. " SPIS725 ,SPI Status Bit 725" "Low,High" bitfld.long 0x00 20. " SPIS724 ,SPI Status Bit 724" "Low,High" textline " " bitfld.long 0x00 19. " SPIS723 ,SPI Status Bit 723" "Low,High" bitfld.long 0x00 18. " SPIS722 ,SPI Status Bit 722" "Low,High" bitfld.long 0x00 17. " SPIS721 ,SPI Status Bit 721" "Low,High" textline " " bitfld.long 0x00 16. " SPIS720 ,SPI Status Bit 720" "Low,High" bitfld.long 0x00 15. " SPIS719 ,SPI Status Bit 719" "Low,High" bitfld.long 0x00 14. " SPIS718 ,SPI Status Bit 718" "Low,High" textline " " bitfld.long 0x00 13. " SPIS717 ,SPI Status Bit 717" "Low,High" bitfld.long 0x00 12. " SPIS716 ,SPI Status Bit 716" "Low,High" bitfld.long 0x00 11. " SPIS715 ,SPI Status Bit 715" "Low,High" textline " " bitfld.long 0x00 10. " SPIS714 ,SPI Status Bit 714" "Low,High" bitfld.long 0x00 9. " SPIS713 ,SPI Status Bit 713" "Low,High" bitfld.long 0x00 8. " SPIS712 ,SPI Status Bit 712" "Low,High" textline " " bitfld.long 0x00 7. " SPIS711 ,SPI Status Bit 711" "Low,High" bitfld.long 0x00 6. " SPIS710 ,SPI Status Bit 710" "Low,High" bitfld.long 0x00 5. " SPIS709 ,SPI Status Bit 709" "Low,High" textline " " bitfld.long 0x00 4. " SPIS708 ,SPI Status Bit 708" "Low,High" bitfld.long 0x00 3. " SPIS707 ,SPI Status Bit 707" "Low,High" bitfld.long 0x00 2. " SPIS706 ,SPI Status Bit 706" "Low,High" textline " " bitfld.long 0x00 1. " SPIS705 ,SPI Status Bit 705" "Low,High" bitfld.long 0x00 0. " SPIS704 ,SPI Status Bit 704" "Low,High" else hgroup.long 0xC0D8++0x03 hide.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17) rgroup.long 0xC0DC++0x03 line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" bitfld.long 0x00 31. " SPIS767 ,SPI Status Bit 767" "Low,High" bitfld.long 0x00 30. " SPIS766 ,SPI Status Bit 766" "Low,High" bitfld.long 0x00 29. " SPIS765 ,SPI Status Bit 765" "Low,High" textline " " bitfld.long 0x00 28. " SPIS764 ,SPI Status Bit 764" "Low,High" bitfld.long 0x00 27. " SPIS763 ,SPI Status Bit 763" "Low,High" bitfld.long 0x00 26. " SPIS762 ,SPI Status Bit 762" "Low,High" textline " " bitfld.long 0x00 25. " SPIS761 ,SPI Status Bit 761" "Low,High" bitfld.long 0x00 24. " SPIS760 ,SPI Status Bit 760" "Low,High" bitfld.long 0x00 23. " SPIS759 ,SPI Status Bit 759" "Low,High" textline " " bitfld.long 0x00 22. " SPIS758 ,SPI Status Bit 758" "Low,High" bitfld.long 0x00 21. " SPIS757 ,SPI Status Bit 757" "Low,High" bitfld.long 0x00 20. " SPIS756 ,SPI Status Bit 756" "Low,High" textline " " bitfld.long 0x00 19. " SPIS755 ,SPI Status Bit 755" "Low,High" bitfld.long 0x00 18. " SPIS754 ,SPI Status Bit 754" "Low,High" bitfld.long 0x00 17. " SPIS753 ,SPI Status Bit 753" "Low,High" textline " " bitfld.long 0x00 16. " SPIS752 ,SPI Status Bit 752" "Low,High" bitfld.long 0x00 15. " SPIS751 ,SPI Status Bit 751" "Low,High" bitfld.long 0x00 14. " SPIS750 ,SPI Status Bit 750" "Low,High" textline " " bitfld.long 0x00 13. " SPIS749 ,SPI Status Bit 749" "Low,High" bitfld.long 0x00 12. " SPIS748 ,SPI Status Bit 748" "Low,High" bitfld.long 0x00 11. " SPIS747 ,SPI Status Bit 747" "Low,High" textline " " bitfld.long 0x00 10. " SPIS746 ,SPI Status Bit 746" "Low,High" bitfld.long 0x00 9. " SPIS745 ,SPI Status Bit 745" "Low,High" bitfld.long 0x00 8. " SPIS744 ,SPI Status Bit 744" "Low,High" textline " " bitfld.long 0x00 7. " SPIS743 ,SPI Status Bit 743" "Low,High" bitfld.long 0x00 6. " SPIS742 ,SPI Status Bit 742" "Low,High" bitfld.long 0x00 5. " SPIS741 ,SPI Status Bit 741" "Low,High" textline " " bitfld.long 0x00 4. " SPIS740 ,SPI Status Bit 740" "Low,High" bitfld.long 0x00 3. " SPIS739 ,SPI Status Bit 739" "Low,High" bitfld.long 0x00 2. " SPIS738 ,SPI Status Bit 738" "Low,High" textline " " bitfld.long 0x00 1. " SPIS737 ,SPI Status Bit 737" "Low,High" bitfld.long 0x00 0. " SPIS736 ,SPI Status Bit 736" "Low,High" else hgroup.long 0xC0DC++0x03 hide.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18) rgroup.long 0xC0E0++0x03 line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" bitfld.long 0x00 31. " SPIS799 ,SPI Status Bit 799" "Low,High" bitfld.long 0x00 30. " SPIS798 ,SPI Status Bit 798" "Low,High" bitfld.long 0x00 29. " SPIS797 ,SPI Status Bit 797" "Low,High" textline " " bitfld.long 0x00 28. " SPIS796 ,SPI Status Bit 796" "Low,High" bitfld.long 0x00 27. " SPIS795 ,SPI Status Bit 795" "Low,High" bitfld.long 0x00 26. " SPIS794 ,SPI Status Bit 794" "Low,High" textline " " bitfld.long 0x00 25. " SPIS793 ,SPI Status Bit 793" "Low,High" bitfld.long 0x00 24. " SPIS792 ,SPI Status Bit 792" "Low,High" bitfld.long 0x00 23. " SPIS791 ,SPI Status Bit 791" "Low,High" textline " " bitfld.long 0x00 22. " SPIS790 ,SPI Status Bit 790" "Low,High" bitfld.long 0x00 21. " SPIS789 ,SPI Status Bit 789" "Low,High" bitfld.long 0x00 20. " SPIS788 ,SPI Status Bit 788" "Low,High" textline " " bitfld.long 0x00 19. " SPIS787 ,SPI Status Bit 787" "Low,High" bitfld.long 0x00 18. " SPIS786 ,SPI Status Bit 786" "Low,High" bitfld.long 0x00 17. " SPIS785 ,SPI Status Bit 785" "Low,High" textline " " bitfld.long 0x00 16. " SPIS784 ,SPI Status Bit 784" "Low,High" bitfld.long 0x00 15. " SPIS783 ,SPI Status Bit 783" "Low,High" bitfld.long 0x00 14. " SPIS782 ,SPI Status Bit 782" "Low,High" textline " " bitfld.long 0x00 13. " SPIS781 ,SPI Status Bit 781" "Low,High" bitfld.long 0x00 12. " SPIS780 ,SPI Status Bit 780" "Low,High" bitfld.long 0x00 11. " SPIS779 ,SPI Status Bit 779" "Low,High" textline " " bitfld.long 0x00 10. " SPIS778 ,SPI Status Bit 778" "Low,High" bitfld.long 0x00 9. " SPIS777 ,SPI Status Bit 777" "Low,High" bitfld.long 0x00 8. " SPIS776 ,SPI Status Bit 776" "Low,High" textline " " bitfld.long 0x00 7. " SPIS775 ,SPI Status Bit 775" "Low,High" bitfld.long 0x00 6. " SPIS774 ,SPI Status Bit 774" "Low,High" bitfld.long 0x00 5. " SPIS773 ,SPI Status Bit 773" "Low,High" textline " " bitfld.long 0x00 4. " SPIS772 ,SPI Status Bit 772" "Low,High" bitfld.long 0x00 3. " SPIS771 ,SPI Status Bit 771" "Low,High" bitfld.long 0x00 2. " SPIS770 ,SPI Status Bit 770" "Low,High" textline " " bitfld.long 0x00 1. " SPIS769 ,SPI Status Bit 769" "Low,High" bitfld.long 0x00 0. " SPIS768 ,SPI Status Bit 768" "Low,High" else hgroup.long 0xC0E0++0x03 hide.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19) rgroup.long 0xC0E4++0x03 line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" bitfld.long 0x00 31. " SPIS831 ,SPI Status Bit 831" "Low,High" bitfld.long 0x00 30. " SPIS830 ,SPI Status Bit 830" "Low,High" bitfld.long 0x00 29. " SPIS829 ,SPI Status Bit 829" "Low,High" textline " " bitfld.long 0x00 28. " SPIS828 ,SPI Status Bit 828" "Low,High" bitfld.long 0x00 27. " SPIS827 ,SPI Status Bit 827" "Low,High" bitfld.long 0x00 26. " SPIS826 ,SPI Status Bit 826" "Low,High" textline " " bitfld.long 0x00 25. " SPIS825 ,SPI Status Bit 825" "Low,High" bitfld.long 0x00 24. " SPIS824 ,SPI Status Bit 824" "Low,High" bitfld.long 0x00 23. " SPIS823 ,SPI Status Bit 823" "Low,High" textline " " bitfld.long 0x00 22. " SPIS822 ,SPI Status Bit 822" "Low,High" bitfld.long 0x00 21. " SPIS821 ,SPI Status Bit 821" "Low,High" bitfld.long 0x00 20. " SPIS820 ,SPI Status Bit 820" "Low,High" textline " " bitfld.long 0x00 19. " SPIS819 ,SPI Status Bit 819" "Low,High" bitfld.long 0x00 18. " SPIS818 ,SPI Status Bit 818" "Low,High" bitfld.long 0x00 17. " SPIS817 ,SPI Status Bit 817" "Low,High" textline " " bitfld.long 0x00 16. " SPIS816 ,SPI Status Bit 816" "Low,High" bitfld.long 0x00 15. " SPIS815 ,SPI Status Bit 815" "Low,High" bitfld.long 0x00 14. " SPIS814 ,SPI Status Bit 814" "Low,High" textline " " bitfld.long 0x00 13. " SPIS813 ,SPI Status Bit 813" "Low,High" bitfld.long 0x00 12. " SPIS812 ,SPI Status Bit 812" "Low,High" bitfld.long 0x00 11. " SPIS811 ,SPI Status Bit 811" "Low,High" textline " " bitfld.long 0x00 10. " SPIS810 ,SPI Status Bit 810" "Low,High" bitfld.long 0x00 9. " SPIS809 ,SPI Status Bit 809" "Low,High" bitfld.long 0x00 8. " SPIS808 ,SPI Status Bit 808" "Low,High" textline " " bitfld.long 0x00 7. " SPIS807 ,SPI Status Bit 807" "Low,High" bitfld.long 0x00 6. " SPIS806 ,SPI Status Bit 806" "Low,High" bitfld.long 0x00 5. " SPIS805 ,SPI Status Bit 805" "Low,High" textline " " bitfld.long 0x00 4. " SPIS804 ,SPI Status Bit 804" "Low,High" bitfld.long 0x00 3. " SPIS803 ,SPI Status Bit 803" "Low,High" bitfld.long 0x00 2. " SPIS802 ,SPI Status Bit 802" "Low,High" textline " " bitfld.long 0x00 1. " SPIS801 ,SPI Status Bit 801" "Low,High" bitfld.long 0x00 0. " SPIS800 ,SPI Status Bit 800" "Low,High" else hgroup.long 0xC0E4++0x03 hide.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A) rgroup.long 0xC0E8++0x03 line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" bitfld.long 0x00 31. " SPIS863 ,SPI Status Bit 863" "Low,High" bitfld.long 0x00 30. " SPIS862 ,SPI Status Bit 862" "Low,High" bitfld.long 0x00 29. " SPIS861 ,SPI Status Bit 861" "Low,High" textline " " bitfld.long 0x00 28. " SPIS860 ,SPI Status Bit 860" "Low,High" bitfld.long 0x00 27. " SPIS859 ,SPI Status Bit 859" "Low,High" bitfld.long 0x00 26. " SPIS858 ,SPI Status Bit 858" "Low,High" textline " " bitfld.long 0x00 25. " SPIS857 ,SPI Status Bit 857" "Low,High" bitfld.long 0x00 24. " SPIS856 ,SPI Status Bit 856" "Low,High" bitfld.long 0x00 23. " SPIS855 ,SPI Status Bit 855" "Low,High" textline " " bitfld.long 0x00 22. " SPIS854 ,SPI Status Bit 854" "Low,High" bitfld.long 0x00 21. " SPIS853 ,SPI Status Bit 853" "Low,High" bitfld.long 0x00 20. " SPIS852 ,SPI Status Bit 852" "Low,High" textline " " bitfld.long 0x00 19. " SPIS851 ,SPI Status Bit 851" "Low,High" bitfld.long 0x00 18. " SPIS850 ,SPI Status Bit 850" "Low,High" bitfld.long 0x00 17. " SPIS849 ,SPI Status Bit 849" "Low,High" textline " " bitfld.long 0x00 16. " SPIS848 ,SPI Status Bit 848" "Low,High" bitfld.long 0x00 15. " SPIS847 ,SPI Status Bit 847" "Low,High" bitfld.long 0x00 14. " SPIS846 ,SPI Status Bit 846" "Low,High" textline " " bitfld.long 0x00 13. " SPIS845 ,SPI Status Bit 845" "Low,High" bitfld.long 0x00 12. " SPIS844 ,SPI Status Bit 844" "Low,High" bitfld.long 0x00 11. " SPIS843 ,SPI Status Bit 843" "Low,High" textline " " bitfld.long 0x00 10. " SPIS842 ,SPI Status Bit 842" "Low,High" bitfld.long 0x00 9. " SPIS841 ,SPI Status Bit 841" "Low,High" bitfld.long 0x00 8. " SPIS840 ,SPI Status Bit 840" "Low,High" textline " " bitfld.long 0x00 7. " SPIS839 ,SPI Status Bit 839" "Low,High" bitfld.long 0x00 6. " SPIS838 ,SPI Status Bit 838" "Low,High" bitfld.long 0x00 5. " SPIS837 ,SPI Status Bit 837" "Low,High" textline " " bitfld.long 0x00 4. " SPIS836 ,SPI Status Bit 836" "Low,High" bitfld.long 0x00 3. " SPIS835 ,SPI Status Bit 835" "Low,High" bitfld.long 0x00 2. " SPIS834 ,SPI Status Bit 834" "Low,High" textline " " bitfld.long 0x00 1. " SPIS833 ,SPI Status Bit 833" "Low,High" bitfld.long 0x00 0. " SPIS832 ,SPI Status Bit 832" "Low,High" else hgroup.long 0xC0E8++0x03 hide.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B) rgroup.long 0xC0EC++0x03 line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" bitfld.long 0x00 31. " SPIS895 ,SPI Status Bit 895" "Low,High" bitfld.long 0x00 30. " SPIS894 ,SPI Status Bit 894" "Low,High" bitfld.long 0x00 29. " SPIS893 ,SPI Status Bit 893" "Low,High" textline " " bitfld.long 0x00 28. " SPIS892 ,SPI Status Bit 892" "Low,High" bitfld.long 0x00 27. " SPIS891 ,SPI Status Bit 891" "Low,High" bitfld.long 0x00 26. " SPIS890 ,SPI Status Bit 890" "Low,High" textline " " bitfld.long 0x00 25. " SPIS889 ,SPI Status Bit 889" "Low,High" bitfld.long 0x00 24. " SPIS888 ,SPI Status Bit 888" "Low,High" bitfld.long 0x00 23. " SPIS887 ,SPI Status Bit 887" "Low,High" textline " " bitfld.long 0x00 22. " SPIS886 ,SPI Status Bit 886" "Low,High" bitfld.long 0x00 21. " SPIS885 ,SPI Status Bit 885" "Low,High" bitfld.long 0x00 20. " SPIS884 ,SPI Status Bit 884" "Low,High" textline " " bitfld.long 0x00 19. " SPIS883 ,SPI Status Bit 883" "Low,High" bitfld.long 0x00 18. " SPIS882 ,SPI Status Bit 882" "Low,High" bitfld.long 0x00 17. " SPIS881 ,SPI Status Bit 881" "Low,High" textline " " bitfld.long 0x00 16. " SPIS880 ,SPI Status Bit 880" "Low,High" bitfld.long 0x00 15. " SPIS879 ,SPI Status Bit 879" "Low,High" bitfld.long 0x00 14. " SPIS878 ,SPI Status Bit 878" "Low,High" textline " " bitfld.long 0x00 13. " SPIS877 ,SPI Status Bit 877" "Low,High" bitfld.long 0x00 12. " SPIS876 ,SPI Status Bit 876" "Low,High" bitfld.long 0x00 11. " SPIS875 ,SPI Status Bit 875" "Low,High" textline " " bitfld.long 0x00 10. " SPIS874 ,SPI Status Bit 874" "Low,High" bitfld.long 0x00 9. " SPIS873 ,SPI Status Bit 873" "Low,High" bitfld.long 0x00 8. " SPIS872 ,SPI Status Bit 872" "Low,High" textline " " bitfld.long 0x00 7. " SPIS871 ,SPI Status Bit 871" "Low,High" bitfld.long 0x00 6. " SPIS870 ,SPI Status Bit 870" "Low,High" bitfld.long 0x00 5. " SPIS869 ,SPI Status Bit 869" "Low,High" textline " " bitfld.long 0x00 4. " SPIS868 ,SPI Status Bit 868" "Low,High" bitfld.long 0x00 3. " SPIS867 ,SPI Status Bit 867" "Low,High" bitfld.long 0x00 2. " SPIS866 ,SPI Status Bit 866" "Low,High" textline " " bitfld.long 0x00 1. " SPIS865 ,SPI Status Bit 865" "Low,High" bitfld.long 0x00 0. " SPIS864 ,SPI Status Bit 864" "Low,High" else hgroup.long 0xC0EC++0x03 hide.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C) rgroup.long 0xC0F0++0x03 line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" bitfld.long 0x00 31. " SPIS927 ,SPI Status Bit 927" "Low,High" bitfld.long 0x00 30. " SPIS926 ,SPI Status Bit 926" "Low,High" bitfld.long 0x00 29. " SPIS925 ,SPI Status Bit 925" "Low,High" textline " " bitfld.long 0x00 28. " SPIS924 ,SPI Status Bit 924" "Low,High" bitfld.long 0x00 27. " SPIS923 ,SPI Status Bit 923" "Low,High" bitfld.long 0x00 26. " SPIS922 ,SPI Status Bit 922" "Low,High" textline " " bitfld.long 0x00 25. " SPIS921 ,SPI Status Bit 921" "Low,High" bitfld.long 0x00 24. " SPIS920 ,SPI Status Bit 920" "Low,High" bitfld.long 0x00 23. " SPIS919 ,SPI Status Bit 919" "Low,High" textline " " bitfld.long 0x00 22. " SPIS918 ,SPI Status Bit 918" "Low,High" bitfld.long 0x00 21. " SPIS917 ,SPI Status Bit 917" "Low,High" bitfld.long 0x00 20. " SPIS916 ,SPI Status Bit 916" "Low,High" textline " " bitfld.long 0x00 19. " SPIS915 ,SPI Status Bit 915" "Low,High" bitfld.long 0x00 18. " SPIS914 ,SPI Status Bit 914" "Low,High" bitfld.long 0x00 17. " SPIS913 ,SPI Status Bit 913" "Low,High" textline " " bitfld.long 0x00 16. " SPIS912 ,SPI Status Bit 912" "Low,High" bitfld.long 0x00 15. " SPIS911 ,SPI Status Bit 911" "Low,High" bitfld.long 0x00 14. " SPIS910 ,SPI Status Bit 910" "Low,High" textline " " bitfld.long 0x00 13. " SPIS909 ,SPI Status Bit 909" "Low,High" bitfld.long 0x00 12. " SPIS908 ,SPI Status Bit 908" "Low,High" bitfld.long 0x00 11. " SPIS907 ,SPI Status Bit 907" "Low,High" textline " " bitfld.long 0x00 10. " SPIS906 ,SPI Status Bit 906" "Low,High" bitfld.long 0x00 9. " SPIS905 ,SPI Status Bit 905" "Low,High" bitfld.long 0x00 8. " SPIS904 ,SPI Status Bit 904" "Low,High" textline " " bitfld.long 0x00 7. " SPIS903 ,SPI Status Bit 903" "Low,High" bitfld.long 0x00 6. " SPIS902 ,SPI Status Bit 902" "Low,High" bitfld.long 0x00 5. " SPIS901 ,SPI Status Bit 901" "Low,High" textline " " bitfld.long 0x00 4. " SPIS900 ,SPI Status Bit 900" "Low,High" bitfld.long 0x00 3. " SPIS899 ,SPI Status Bit 899" "Low,High" bitfld.long 0x00 2. " SPIS898 ,SPI Status Bit 898" "Low,High" textline " " bitfld.long 0x00 1. " SPIS897 ,SPI Status Bit 897" "Low,High" bitfld.long 0x00 0. " SPIS896 ,SPI Status Bit 896" "Low,High" else hgroup.long 0xC0F0++0x03 hide.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D) rgroup.long 0xC0F4++0x03 line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" bitfld.long 0x00 31. " SPIS959 ,SPI Status Bit 959" "Low,High" bitfld.long 0x00 30. " SPIS958 ,SPI Status Bit 958" "Low,High" bitfld.long 0x00 29. " SPIS957 ,SPI Status Bit 957" "Low,High" textline " " bitfld.long 0x00 28. " SPIS956 ,SPI Status Bit 956" "Low,High" bitfld.long 0x00 27. " SPIS955 ,SPI Status Bit 955" "Low,High" bitfld.long 0x00 26. " SPIS954 ,SPI Status Bit 954" "Low,High" textline " " bitfld.long 0x00 25. " SPIS953 ,SPI Status Bit 953" "Low,High" bitfld.long 0x00 24. " SPIS952 ,SPI Status Bit 952" "Low,High" bitfld.long 0x00 23. " SPIS951 ,SPI Status Bit 951" "Low,High" textline " " bitfld.long 0x00 22. " SPIS950 ,SPI Status Bit 950" "Low,High" bitfld.long 0x00 21. " SPIS949 ,SPI Status Bit 949" "Low,High" bitfld.long 0x00 20. " SPIS948 ,SPI Status Bit 948" "Low,High" textline " " bitfld.long 0x00 19. " SPIS947 ,SPI Status Bit 947" "Low,High" bitfld.long 0x00 18. " SPIS946 ,SPI Status Bit 946" "Low,High" bitfld.long 0x00 17. " SPIS945 ,SPI Status Bit 945" "Low,High" textline " " bitfld.long 0x00 16. " SPIS944 ,SPI Status Bit 944" "Low,High" bitfld.long 0x00 15. " SPIS943 ,SPI Status Bit 943" "Low,High" bitfld.long 0x00 14. " SPIS942 ,SPI Status Bit 942" "Low,High" textline " " bitfld.long 0x00 13. " SPIS941 ,SPI Status Bit 941" "Low,High" bitfld.long 0x00 12. " SPIS940 ,SPI Status Bit 940" "Low,High" bitfld.long 0x00 11. " SPIS939 ,SPI Status Bit 939" "Low,High" textline " " bitfld.long 0x00 10. " SPIS938 ,SPI Status Bit 938" "Low,High" bitfld.long 0x00 9. " SPIS937 ,SPI Status Bit 937" "Low,High" bitfld.long 0x00 8. " SPIS936 ,SPI Status Bit 936" "Low,High" textline " " bitfld.long 0x00 7. " SPIS935 ,SPI Status Bit 935" "Low,High" bitfld.long 0x00 6. " SPIS934 ,SPI Status Bit 934" "Low,High" bitfld.long 0x00 5. " SPIS933 ,SPI Status Bit 933" "Low,High" textline " " bitfld.long 0x00 4. " SPIS932 ,SPI Status Bit 932" "Low,High" bitfld.long 0x00 3. " SPIS931 ,SPI Status Bit 931" "Low,High" bitfld.long 0x00 2. " SPIS930 ,SPI Status Bit 930" "Low,High" textline " " bitfld.long 0x00 1. " SPIS929 ,SPI Status Bit 929" "Low,High" bitfld.long 0x00 0. " SPIS928 ,SPI Status Bit 928" "Low,High" else hgroup.long 0xC0F4++0x03 hide.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E) rgroup.long 0xC0F8++0x03 line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" bitfld.long 0x00 31. " SPIS991 ,SPI Status Bit 991" "Low,High" bitfld.long 0x00 30. " SPIS990 ,SPI Status Bit 990" "Low,High" bitfld.long 0x00 29. " SPIS989 ,SPI Status Bit 989" "Low,High" textline " " bitfld.long 0x00 28. " SPIS988 ,SPI Status Bit 988" "Low,High" bitfld.long 0x00 27. " SPIS987 ,SPI Status Bit 987" "Low,High" bitfld.long 0x00 26. " SPIS986 ,SPI Status Bit 986" "Low,High" textline " " bitfld.long 0x00 25. " SPIS985 ,SPI Status Bit 985" "Low,High" bitfld.long 0x00 24. " SPIS984 ,SPI Status Bit 984" "Low,High" bitfld.long 0x00 23. " SPIS983 ,SPI Status Bit 983" "Low,High" textline " " bitfld.long 0x00 22. " SPIS982 ,SPI Status Bit 982" "Low,High" bitfld.long 0x00 21. " SPIS981 ,SPI Status Bit 981" "Low,High" bitfld.long 0x00 20. " SPIS980 ,SPI Status Bit 980" "Low,High" textline " " bitfld.long 0x00 19. " SPIS979 ,SPI Status Bit 979" "Low,High" bitfld.long 0x00 18. " SPIS978 ,SPI Status Bit 978" "Low,High" bitfld.long 0x00 17. " SPIS977 ,SPI Status Bit 977" "Low,High" textline " " bitfld.long 0x00 16. " SPIS976 ,SPI Status Bit 976" "Low,High" bitfld.long 0x00 15. " SPIS975 ,SPI Status Bit 975" "Low,High" bitfld.long 0x00 14. " SPIS974 ,SPI Status Bit 974" "Low,High" textline " " bitfld.long 0x00 13. " SPIS973 ,SPI Status Bit 973" "Low,High" bitfld.long 0x00 12. " SPIS972 ,SPI Status Bit 972" "Low,High" bitfld.long 0x00 11. " SPIS971 ,SPI Status Bit 971" "Low,High" textline " " bitfld.long 0x00 10. " SPIS970 ,SPI Status Bit 970" "Low,High" bitfld.long 0x00 9. " SPIS969 ,SPI Status Bit 969" "Low,High" bitfld.long 0x00 8. " SPIS968 ,SPI Status Bit 968" "Low,High" textline " " bitfld.long 0x00 7. " SPIS967 ,SPI Status Bit 967" "Low,High" bitfld.long 0x00 6. " SPIS966 ,SPI Status Bit 966" "Low,High" bitfld.long 0x00 5. " SPIS965 ,SPI Status Bit 965" "Low,High" textline " " bitfld.long 0x00 4. " SPIS964 ,SPI Status Bit 964" "Low,High" bitfld.long 0x00 3. " SPIS963 ,SPI Status Bit 963" "Low,High" bitfld.long 0x00 2. " SPIS962 ,SPI Status Bit 962" "Low,High" textline " " bitfld.long 0x00 1. " SPIS961 ,SPI Status Bit 961" "Low,High" bitfld.long 0x00 0. " SPIS960 ,SPI Status Bit 960" "Low,High" else hgroup.long 0xC0F8++0x03 hide.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" endif tree.end width 12. tree "Peripheral/Component ID Registers" rgroup.long 0xFFE0++0x03 line.long 0x00 "GICD_PIDR0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PART_0 ,Part number[7:0]" rgroup.long 0xFFE4++0x03 line.long 0x00 "GICD_PIDR1,Peripheral ID1 Register" bitfld.long 0x00 4.--7. " DES_1 ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " PART_1 , Part number[11:8]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFFE8++0x03 line.long 0x00 "GICD_PIDR2,Peripheral ID2 Register" bitfld.long 0x00 4.--7. " ARCHREV ,Identifies the version of the GIC architecture with which the GIC-500 complies" "Reserved,Reserved,Reserved,v3.0,?..." bitfld.long 0x00 3. " JEDEC ,Indicates that a JEDEC-assigned JEP106 identity code is used" "Not Used,Used" bitfld.long 0x00 0.--2. " DES_1 ,JEP106 identity code [6:4]" "0,1,2,3,4,5,6,7" rgroup.long 0xFFEC++0x03 line.long 0x00 "GICD_PIDR3,Peripheral ID3 Register" bitfld.long 0x00 4.--7. " REVAND ,Manufacturer defined revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " CMOD ,Indicates if the customer has modified the behavior of the component" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFFD0++0x03 line.long 0x00 "GICD_PIDR4,Peripheral ID4 Register" bitfld.long 0x00 4.--7. " SIZE ,64 KB software visible page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " DES_2 ,ARM implementation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hgroup.long 0xFFD4++0x03 hide.long 0x00 "GICD_PIDR5,Peripheral ID5 Register" hgroup.long 0xFFD8++0x03 hide.long 0x00 "GICD_PIDR6,Peripheral ID6 Register" hgroup.long 0xFFDC++0x03 hide.long 0x00 "GICD_PIDR7,Peripheral ID7 Register" rgroup.long 0xFFF0++0x03 line.long 0x00 "GICD_CIDR0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFF4++0x03 line.long 0x00 "GICD_CIDR1,Component ID1 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFF8++0x03 line.long 0x00 "GICD_CIDR2,Component ID2 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFFC++0x03 line.long 0x00 "GICD_CIDR3,Component ID3 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" tree.end tree.end width 0x0B base (COMP.BASE("GICD",-1.)+0x20000) width 24. tree "Interrupt Translation Service" group.long 0x00++0x03 line.long 0x00 "GITS_CTLR,ITS Control Register" rbitfld.long 0x00 31. " QUIESCENT ,Indicates completion of all ITS operations" "Not quiescent,Quiescent" bitfld.long 0x00 0. " ENABLED ,Controls whether the ITS is enabled" "Disabled,Enabled" rgroup.long 0x04++0x03 line.long 0x00 "GITS_IIDR,ITS Implementer Identification Register" bitfld.long 0x00 24.--31. " PRODID ,Indicates the product ID" "GIC-500,?..." bitfld.long 0x00 16.--19. " VAR ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " REV ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" if (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0x1000000000)==0x1000000000)&&(((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0xFF000000)!=0x00) rgroup.quad 0x08++0x07 line.quad 0x00 "GITS_TYPER,ITS Type Register" bitfld.quad 0x00 37. " VMOVP ,Indicates the form of the VMOVP command" "All ITSs,One ITS" bitfld.quad 0x00 36. " CIL ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value" textline " " bitfld.quad 0x00 32.--35. " CIDBITS ,Number of Collection ID bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.quad.byte 0x00 24.--31. 1. " HCC ,Hardware Collection Count" textline " " bitfld.quad 0x00 19. " PTA ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address" bitfld.quad 0x00 18. " SEIS ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported" textline " " bitfld.quad 0x00 13.--17. " DEVBITS ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 8.--12. " ID_BITS ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " rbitfld.quad 0x00 4.--7. " ITT_ENTRY_SIZE ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.quad 0x00 2. " CCT ,Cumulative Collection Tables" "0,1" elif (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0x1000000000)==0x1000000000) rgroup.quad 0x08++0x07 line.quad 0x00 "GITS_TYPER,ITS Type Register" bitfld.quad 0x00 37. " VMOVP ,Indicates the form of the VMOVP command" "All ITSs,One ITS" bitfld.quad 0x00 36. " CIL ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value" textline " " bitfld.quad 0x00 32.--35. " CIDBITS ,Number of Collection ID bits minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.quad.byte 0x00 24.--31. 1. " HCC ,Hardware Collection Count" textline " " bitfld.quad 0x00 19. " PTA ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address" bitfld.quad 0x00 18. " SEIS ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported" textline " " bitfld.quad 0x00 13.--17. " DEVBITS ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.quad 0x00 8.--12. " ID_BITS ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " rbitfld.quad 0x00 4.--7. " ITT_ENTRY_SIZE ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" elif (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0xFF000000)!=0x00) rgroup.quad 0x08++0x07 line.quad 0x00 "GITS_TYPER,ITS Type Register" bitfld.quad 0x00 37. " VMOVP ,Indicates the form of the VMOVP command" "All ITSs,One ITS" bitfld.quad 0x00 36. " CIL ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value" textline " " hexmask.quad.byte 0x00 24.--31. 1. " HCC ,Hardware Collection Count" bitfld.quad 0x00 19. " PTA ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address" textline " " bitfld.quad 0x00 18. " SEIS ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported" bitfld.quad 0x00 13.--17. " DEVBITS ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.quad 0x00 8.--12. " ID_BITS ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rbitfld.quad 0x00 4.--7. " ITT_ENTRY_SIZE ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.quad 0x00 2. " CCT ,Cumulative Collection Tables" "0,1" else rgroup.quad 0x08++0x07 line.quad 0x00 "GITS_TYPER,ITS Type Register" bitfld.quad 0x00 37. " VMOVP ,Indicates the form of the VMOVP command" "All ITSs,One ITS" bitfld.quad 0x00 36. " CIL ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value" textline " " hexmask.quad.byte 0x00 24.--31. 1. " HCC ,Hardware Collection Count" bitfld.quad 0x00 19. " PTA ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address" textline " " bitfld.quad 0x00 18. " SEIS ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported" bitfld.quad 0x00 13.--17. " DEVBITS ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.quad 0x00 8.--12. " ID_BITS ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rbitfld.quad 0x00 4.--7. " ITT_ENTRY_SIZE ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif group.quad 0x80++0x07 line.quad 0x00 "GITS_CBASER,The command queue control register" bitfld.quad 0x00 63. " VALID ,Indicates whether software has allocated memory for the command queue" "Not allocated,Allocated" bitfld.quad 0x00 59.--61. " INNERCACHE ,Indicates the Inner Cacheability attributes of accesses to the command queue" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable" textline " " bitfld.quad 0x00 53.--55. " OUTERCACHE ,Indicates the Outer Cacheability attributes of accesses to the command queue" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable" hexmask.quad 0x00 12.--51. 0x10 " PHYSICAL_ADDRESS ,Bits [51:12] of the base physical address of the command queue" textline " " bitfld.quad 0x00 10.--11. " SHAREABILITY ,Indicates the Shareability attributes of accesses to the command queue" "Non-shareable,Inner Shareable,Outer Shareable,?..." hexmask.quad.byte 0x00 0.--7. 1. " SIZE ,The number of 4KB pages of physical memory allocated to the command queue minus one" group.quad 0x88++0x7 line.quad 0x00 "GITS_CWRITER,The command queue write pointer" hexmask.quad.word 0x00 5.--19. 0x20 " OFFSET ,Bits [19:5] of the offset from GITS_CBASER" bitfld.quad 0x00 0. " RETRY ,Restarts the processing of commands by the ITS if it stalled because of a command error" "No effect,Restarted" group.quad 0x90++0x07 line.quad 0x00 "GITS_CREADR,The command queue read pointer" hexmask.quad.word 0x00 5.--19. 0x20 " OFFSET ,Bits [19:5] of the offset from GITS_CBASER" bitfld.quad 0x00 0. " STALLED ,Reports whether the processing of commands is stalled because of a command error" "Not stalled,Stalled" if (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0100))&0x700000000000000)==0x00) group.quad 0x100++0x07 line.quad 0x00 "GITS_BASER0,ITS table control register" bitfld.quad 0x00 63. " VALID ,Indicates whether software has allocated memory for the translation table" "Not allocated,Allocated" bitfld.quad 0x00 62. " INDIRECT ,This field indicates whether an implemented register specifies a single flat table or a two-level table where the first level contains a list of descriptors" "Single Level,Two Level" textline " " bitfld.quad 0x00 59.--61. " INNERCACHE ,Indicates the Inner Cacheability attributes of accesses to the table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable" rbitfld.quad 0x00 56.--58. " TYPE ,Specifies the type of entity that requires entries in the corresponding translation table" "Unimplemented,Devices,Reserved,Reserved,Interrupt collections,?..." textline " " bitfld.quad 0x00 53.--55. " OUTERCACHE ,Indicates the Outer Cacheability attributes of accesses to the table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable" rbitfld.quad 0x00 48.--52. " ENTRY_SIZE ,Specifies the number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " hexmask.quad 0x00 12.--47. 1. " PHYSICAL_ADDRESS ,Physical Address" bitfld.quad 0x00 10.--11. " SHAREABILITY ,Indicates the Shareability attributes of accesses to the table" "Non-shareable,Inner Shareable,Outer Shareable,?..." textline " " bitfld.quad 0x00 8.--9. " PAGE_SIZE ,The size of page that the translation table uses" "4KB,16KB,64KB,?..." else group.quad 0x100++0x07 line.quad 0x00 "GITS_BASER0,ITS table control register" bitfld.quad 0x00 63. " VALID ,Indicates whether software has allocated memory for the translation table" "Not allocated,Allocated" bitfld.quad 0x00 62. " INDIRECT ,This field indicates whether an implemented register specifies a single flat table or a two-level table where the first level contains a list of descriptors" "Single Level,Two Level" textline " " bitfld.quad 0x00 59.--61. " INNERCACHE ,Indicates the Inner Cacheability attributes of accesses to the table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable" rbitfld.quad 0x00 56.--58. " TYPE ,Specifies the type of entity that requires entries in the corresponding translation table" "Unimplemented,Devices,Reserved,Reserved,Interrupt collections,?..." textline " " bitfld.quad 0x00 53.--55. " OUTERCACHE ,Indicates the Outer Cacheability attributes of accesses to the table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable" rbitfld.quad 0x00 48.--52. " ENTRY_SIZE ,Specifies the number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " hexmask.quad 0x00 12.--47. 0x10 " PHYSICAL_ADDRESS ,Physical Address" bitfld.quad 0x00 10.--11. " SHAREABILITY ,Indicates the Shareability attributes of accesses to the table" "Non-shareable,Inner Shareable,Outer Shareable,?..." textline " " bitfld.quad 0x00 8.--9. " PAGE_SIZE ,The size of page that the translation table uses" "4KB,16KB,64KB,?..." hexmask.quad.byte 0x00 0.--7. 1. " SIZE ,The number of pages of physical memory allocated to the table minus one" endif textline " " wgroup.long 0xC000++0x03 line.long 0x00 "GITS_TRKCTLR,Tracking Control Register" bitfld.long 0x00 1. " LPI_TRACK ,Write 0b1 to capture information about the next interrupt that the ITS generated or failed to generate because of misprogramming" "No effect,Capture" bitfld.long 0x00 0. " CACHE_COUNT_RESET ,Write 0b1 to reset the cache hit and miss counters in GITS_TRKICR and GITS_TRKLCR" "No effect,Reset" if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x1F)==0x01) rgroup.long 0xC004++0x03 line.long 0x00 "GITS_TRKR,Tracking Status Register" bitfld.long 0x00 6. " PID_OUT_OF_RANGE ,Indicates that the LPI PID is larger than that allowed by the IDbits field in the GICR_PROPBASER" "0,1" bitfld.long 0x00 5. " TARGET_OUT_OF_RANGE ,Indicates that target collection has not been successfully mapped using MAPC or that the target core does not have LPIs enabled in GICR_CTLR" "0,1" textline " " bitfld.long 0x00 4. " NO_TRANSLATION ,Indicates that no valid MAPI or MAPVI has successfully been performed for this combination of input ID and Device ID" "0,1" bitfld.long 0x00 3. " INPUT_ID_OUT_OF_RANGE ,Indicates that the input ID is larger than that allowed for that Device ID which is set during the MAPD command or it is larger than 65535" "0,1" textline " " bitfld.long 0x00 2. " DEVICE_ID_UNMAPPED ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1" bitfld.long 0x00 1. " DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1" textline " " bitfld.long 0x00 0. " LPI_TRACKED ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid" elif (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0xF)==0x01) rgroup.long 0xC004++0x03 line.long 0x00 "GITS_TRKR,Tracking Status Register" bitfld.long 0x00 4. " NO_TRANSLATION ,Indicates that no valid MAPI or MAPVI has successfully been performed for this combination of input ID and Device ID" "0,1" bitfld.long 0x00 3. " INPUT_ID_OUT_OF_RANGE ,Indicates that the input ID is larger than that allowed for that Device ID which is set during the MAPD command or it is larger than 65535" "0,1" textline " " bitfld.long 0x00 2. " DEVICE_ID_UNMAPPED ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1" bitfld.long 0x00 1. " DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1" textline " " bitfld.long 0x00 0. " LPI_TRACKED ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid" elif (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x7)==0x01) rgroup.long 0xC004++0x03 line.long 0x00 "GITS_TRKR,Tracking Status Register" bitfld.long 0x00 3. " INPUT_ID_OUT_OF_RANGE ,Indicates that the input ID is larger than that allowed for that Device ID which is set during the MAPD command or it is larger than 65535" "0,1" bitfld.long 0x00 2. " DEVICE_ID_UNMAPPED ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1" textline " " bitfld.long 0x00 1. " DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1" bitfld.long 0x00 0. " LPI_TRACKED ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid" elif (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x3)==0x01) rgroup.long 0xC004++0x03 line.long 0x00 "GITS_TRKR,Tracking Status Register" bitfld.long 0x00 2. " DEVICE_ID_UNMAPPED ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1" bitfld.long 0x00 1. " DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1" textline " " bitfld.long 0x00 0. " LPI_TRACKED ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid" else rgroup.long 0xC004++0x03 line.long 0x00 "GITS_TRKR,Tracking Status Register" bitfld.long 0x00 1. " DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1" bitfld.long 0x00 0. " LPI_TRACKED ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid" endif if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x01)==0x01) rgroup.long 0xC008++0x03 line.long 0x00 "GITS_TRKDIDR,Debug Tracked DID Register" hexmask.long.tbyte 0x00 0.--19. 1. " LPI_DID ,The Device ID for the interrupt that was tracked" else hgroup.long 0xC008++0x03 hide.long 0x00 "GITS_TRKDIDR,Debug Tracked DID Register" endif if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x7F)==0x01) rgroup.long 0xC00C++0x03 line.long 0x00 "GITS_TRKPIDR,Debug Tracked PID Register" hexmask.long.word 0x00 0.--15. 1. " LPI_PID ,The ID after translation for an interrupt that was tracked and generated an LPI successfully" else hgroup.long 0xC00C++0x03 hide.long 0x00 "GITS_TRKPIDR,Debug Tracked PID Register" endif if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x01)==0x01) rgroup.long 0xC010++0x03 line.long 0x00 "GITS_TRKVIDR,Debug Tracked ID Register" hexmask.long.word 0x00 0.--15. 1. " LPI_ID ,The ID before translation of the interrupt that was tracked" else hgroup.long 0xC010++0x03 hide.long 0x00 "GITS_TRKVIDR,Debug Tracked ID Register" endif if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x7F)==0x01) rgroup.long 0xC014++0x03 line.long 0x00 "GITS_TRKTGTR,Debug Tracked Target Register" hexmask.long.byte 0x00 0.--6. 1. " LPI_TARGET_CORE ,The target core for an interrupt that was tracked and generated an LPI successfully" else hgroup.long 0xC014++0x03 hide.long 0x00 "GITS_TRKTGTR,Debug Tracked Target Register" endif rgroup.long 0xC018++0x03 line.long 0x00 "GITS_TRKICR,Debug ITE Cache Statistics" hexmask.long.word 0x00 16.--31. 1. " ITE_CACHE_HITS ,Number of hits in the ITE cache" hexmask.long.word 0x00 0.--15. 1. " ITE_CACHE_MISSES ,Number of misses in the ITE cache" rgroup.long 0xC01C++0x03 line.long 0x00 "GITS_TRKLCR,Debug LPI Cache Statistics" hexmask.long.word 0x00 16.--31. 1. " LPI_CACHE_HITS ,Number of hits in the LPI cache" hexmask.long.word 0x00 0.--15. 1. " LPI_CACHE_MISSES ,Number of misses in the LPI cache" rgroup.long 0xFFE0++0x03 line.long 0x00 "GITS_PIDR0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PART_0 ,Part number[7:0]" rgroup.long 0xFFE4++0x03 line.long 0x00 "GITS_PIDR1,Peripheral ID1 Register" bitfld.long 0x00 4.--7. " DES_1 ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " PART_1 , Part number[11:8]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFFE8++0x03 line.long 0x00 "GITS_PIDR2,Peripheral ID2 Register" bitfld.long 0x00 4.--7. " ARCHREV ,Identifies the version of the GIC architecture with which the GIC-500 complies" "Reserved,Reserved,Reserved,v3.0,?..." bitfld.long 0x00 3. " JEDEC ,Indicates that a JEDEC-assigned JEP106 identity code is used" "Low,High" textline " " bitfld.long 0x00 0.--2. " DES_1 ,JEP106 identity code [6:4]" "0,1,2,3,4,5,6,7" rgroup.long 0xFFEC++0x03 line.long 0x00 "GITS_PIDR3,Peripheral ID3 Register" bitfld.long 0x00 4.--7. " REVAND ,Manufacturer defined revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " CMOD ,Indicates if the customer has modified the behavior of the component" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFFD0++0x03 line.long 0x00 "GITS_PIDR4,Peripheral ID4 Register" bitfld.long 0x00 4.--7. " SIZE ,64 KB software visible page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " DES_2 ,ARM implementation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hgroup.long 0xFFD4++0x03 hide.long 0x00 "GITS_PIDR5,Peripheral ID5 Register" hgroup.long 0xFFD8++0x03 hide.long 0x00 "GITS_PIDR6,Peripheral ID6 Register" hgroup.long 0xFFDC++0x03 hide.long 0x00 "GITS_PIDR7,Peripheral ID7 Register" rgroup.long 0xFFF0++0x03 line.long 0x00 "GITS_CIDR0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFF4++0x03 line.long 0x00 "GITS_CIDR1,Component ID1 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFF8++0x03 line.long 0x00 "GITS_CIDR2,Component ID2 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFFC++0x03 line.long 0x00 "GITS_CIDR3,Component ID3 Register" hexmask.long.byte 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" textline " " base (COMP.BASE("GICD",-1.)+0x20000)+0x10000 if (((per.l((COMP.BASE("GICD",-1.)+0x20000)))&0x01)==0x01) wgroup.long 0x40++0x03 line.long 0x00 "GITS_TRANSLATER,ITS Translation Register" else hgroup.long 0x40++0x03 hide.long 0x00 "GITS_TRANSLATER,ITS Translation Register" endif tree.end width 0x0B base COMP.BASE("GICR",-1.) width 17. tree "Redistributor Interface" tree "Control Registers" if (((per.q(COMP.BASE("GICR",-1.)+0x08))&0x21)==0x21) group.long 0x0000++0x03 line.long 0x00 "GICR_CTLR,Redistributor Control Register" rbitfld.long 0x00 31. " UWP ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending" bitfld.long 0x00 26. " DPG1S ,Disable Processor selection for Group 1 Secure interrupts" "No,Yes" bitfld.long 0x00 25. " DPG1NS ,Disable Processor selection for Group 1 Non-secure interrupts" "No,Yes" textline " " bitfld.long 0x00 24. " DPG0 ,Disable Processor selection for Group 0 interrupts" "No,Yes" bitfld.long 0x00 3. " RWP ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending" bitfld.long 0x00 0. " ENABLE_LPIS ,Enables LPIs in implementations where affinity routing is enabled for Security state" "Disabled,Enabled" elif (((per.q(COMP.BASE("GICR",-1.)+0x08))&0x21)==0x20) group.long 0x0000++0x03 line.long 0x00 "GICR_CTLR,Redistributor Control Register" rbitfld.long 0x00 31. " UWP ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending" bitfld.long 0x00 26. " DPG1S ,Disable Processor selection for Group 1 Secure interrupts" "No,Yes" bitfld.long 0x00 25. " DPG1NS ,Disable Processor selection for Group 1 Non-secure interrupts" "No,Yes" textline " " bitfld.long 0x00 24. " DPG0 ,Disable Processor selection for Group 0 interrupts" "No,Yes" bitfld.long 0x00 3. " RWP ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending" elif (((per.q(COMP.BASE("GICR",-1.)+0x08))&0x21)==0x01) group.long 0x0000++0x03 line.long 0x00 "GICR_CTLR,Redistributor Control Register" rbitfld.long 0x00 31. " UWP ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending" bitfld.long 0x00 3. " RWP ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending" bitfld.long 0x00 0. " ENABLE_LPIS ,Enables LPIs in implementations where affinity routing is enabled for Security state" "Disabled,Enabled" else group.long 0x0000++0x03 line.long 0x00 "GICR_CTLR,Redistributor Control Register" rbitfld.long 0x00 31. " UWP ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending" bitfld.long 0x00 3. " RWP ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending" endif rgroup.long 0x0004++0x03 line.long 0x00 "GICR_IIDR,Distributor Implementer Identification Register" bitfld.long 0x00 24.--31. " PRODID ,Indicates the product ID" "GIC-500,?..." bitfld.long 0x00 16.--19. " VAR ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " REV ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" rgroup.quad 0x0008++0x07 line.quad 0x00 "GICR_TYPER,Interrupt Controller Type Register" hexmask.quad.byte 0x00 56.--63. 1. " AFF3 ,Affinity level 3 value for the Redistributor" hexmask.quad.byte 0x00 48.--55. 1. " AFF2 ,Affinity level 2 value for the Redistributor" hexmask.quad.byte 0x00 40.--47. 1. " AFF1 ,Affinity level 1 value for the Redistributor" textline " " hexmask.quad.byte 0x00 32.--39. 1. " AFF0 ,Affinity level 0 value for the Redistributor" bitfld.quad 0x00 24.--25. " COMMONLPIAFF ,The affinity level at which Redistributors share a LPI Configuration table" "All levels,AFF3,AFF3/AFF2,AFF3/AFF2/AFF1" hexmask.quad.word 0x00 8.--23. 1. " PROCESSOR_NUMBER ,A unique identifier for the PE" textline " " bitfld.quad 0x00 5. " DPGS ,Sets support for GICR_CTLR.DPG* bits" "Not supported,Supported" bitfld.quad 0x00 4. " LAST ,Indicates whether this Redistributor is the highest-numbered Redistributor in a series of contiguous Redistributor pages" "Not highest,Highest" bitfld.quad 0x00 3. " DIRECTLPI ,Indicates whether this Redistributor supports direct injection of LPIs" "Not supported,Supported" textline " " bitfld.quad 0x00 0. " PLPIS ,Indicates whether the GIC implementation supports physical LPIs" "Not supported,Supported" if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)||((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x0014)))) group.long 0x0014++0x03 line.long 0x00 "GICR_WAKER,Power Management Control Register" bitfld.long 0x00 31. " QUIESCENT ,This bit shows that the GIC-500 is idle and can be powered down if required" "Not quiescent,Quiescent" bitfld.long 0x00 2. " CHILDRENASLEEP ,Indicates the bus between the CPU interface and this Redistributor is quiescent" "Not quiescent,Quiescent" bitfld.long 0x00 1. " PROCESSORASLEEP ,Indicates if this Redistributor must assert a WakeRequest if there is a pending interrupt targeted at the connected core" "No,Yes" textline " " bitfld.long 0x00 0. " SLEEP ,Indicates if GIC-500 ensures that all the caches are consistent with external memory and that it is safe to power off" "No,Yes" textline " " else hgroup.long 0x0014++0x03 hide.long 0x00 "GICR_WAKER,Power Management Control Register" endif group.quad 0x070++0x07 line.quad 0x00 "GICR_PROPBASER,Common LPI configuration table base register" bitfld.quad 0x00 56.--58. " OUTERCACHE ,Indicates the Outer Cacheability attributes of accesses to the LPI Configuration table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable" hexmask.quad 0x00 12.--51. 0x10 " PHYSICAL_ADDRESS ,Bits [51:12] of the physical address containing the LPI Configuration table" textline " " bitfld.quad 0x00 10.--11. " SHAREABILITY ,Indicates the Shareability attributes of accesses to the LPI Configuration table" "Non-shareable,Inner Shareable,Outer Shareable,?..." bitfld.quad 0x00 7.--9. " INNERCACHE ,Indicates the Inner Cacheability attributes of accesses to the LPI Configuration table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable" textline " " bitfld.quad 0x00 0.--4. " IDBITS ,The number of bits of LPI INTID supported minus one by the LPI Configuration table starting at Physical_Address" group.quad 0x78++0x07 line.quad 0x00 "GICR_PENDBASER,LPI pending table base register" bitfld.quad 0x00 62. " PTZ ,Pending Table Zero" "Not zero,Zero" bitfld.quad 0x00 56.--58. " OUTERCACHE ,Indicates the Outer Cacheability attributes of accesses to the LPI Pending table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable" textline " " hexmask.quad 0x00 16.--51. 0x10 " PHYSICAL_ADDRESS ,Bits [51:16] of the physical address containing the LPI Pending table" bitfld.quad 0x00 10.--11. " SHAREABILITY ,Indicates the Shareability attributes of accesses to the LPI Pending table" "Non-shareable,Inner Shareable,Outer Shareable,?..." textline " " bitfld.quad 0x00 7.--9. " INNERCACHE ,Indicates the Inner Cacheability attributes of accesses to the LPI Pending table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable" textline " " tree.end tree "SGI and PPI Registers" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x10080)) group.long 0x10080++0x03 line.long 0x0 "GICR_IGROUPR0,Interrupt Group Register 0" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Secure,Non-secure Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Secure,Non-secure Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Secure,Non-secure Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Secure,Non-secure Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Secure,Non-secure Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Secure,Non-secure Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Secure,Non-secure Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Secure,Non-secure Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Secure,Non-secure Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Secure,Non-secure Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Secure,Non-secure Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Secure,Non-secure Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Secure,Non-secure Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Secure,Non-secure Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Secure,Non-secure Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Secure,Non-secure Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Secure,Non-secure Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Secure,Non-secure Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Secure,Non-secure Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Secure,Non-secure Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Secure,Non-secure Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Secure,Non-secure Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Secure,Non-secure Group 1" elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x000) group.long 0x10080++0x03 line.long 0x0 "GICR_IGROUPR0,Interrupt Group Register 0" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0,Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0,Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0,Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0,Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0,Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0,Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0,Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0,Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0,Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0,Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0,Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0,Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0,Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0,Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0,Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0,Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0,Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0,Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0,Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0,Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0,Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0,Group 1" else hgroup.long 0x10080++0x03 hide.long 0x00 "GICR_IGROUPR0,Interrupt Group Register 0" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif textline " " width 24. group.long 0x10100++0x03 line.long 0x0 "GICR_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31 ,Set/Clear Enable Bit 31" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB30 ,Set/Clear Enable Bit 30" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB29 ,Set/Clear Enable Bit 29" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28 ,Set/Clear Enable Bit 28" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB27 ,Set/Clear Enable Bit 27" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB26 ,Set/Clear Enable Bit 26" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25 ,Set/Clear Enable Bit 25" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB24 ,Set/Clear Enable Bit 24" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB23 ,Set/Clear Enable Bit 23" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22 ,Set/Clear Enable Bit 22" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB21 ,Set/Clear Enable Bit 21" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB20 ,Set/Clear Enable Bit 20" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19 ,Set/Clear Enable Bit 19" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB18 ,Set/Clear Enable Bit 18" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB17 ,Set/Clear Enable Bit 17" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16 ,Set/Clear Enable Bit 16" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB15 ,Set/Clear Enable Bit 15" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB14 ,Set/Clear Enable Bit 14" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB13 ,Set/Clear Enable Bit 13" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB12 ,Set/Clear Enable Bit 12" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB11 ,Set/Clear Enable Bit 11" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB10 ,Set/Clear Enable Bit 10" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB9 ,Set/Clear Enable Bit 9" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB8 ,Set/Clear Enable Bit 8" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB7 ,Set/Clear Enable Bit 7" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB6 ,Set/Clear Enable Bit 6" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB5 ,Set/Clear Enable Bit 5" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB4 ,Set/Clear Enable Bit 4" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB3 ,Set/Clear Enable Bit 3" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB2 ,Set/Clear Enable Bit 2" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB1 ,Set/Clear Enable Bit 1" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB0 ,Set/Clear Enable Bit 0" "Disabled,Enabled" group.long 0x10200++0x03 line.long 0x0 "GICR_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31 ,Set/Clear Pending Bit 31" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND30 ,Set/Clear Pending Bit 30" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND29 ,Set/Clear Pending Bit 29" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28 ,Set/Clear Pending Bit 28" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND27 ,Set/Clear Pending Bit 27" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND26 ,Set/Clear Pending Bit 26" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25 ,Set/Clear Pending Bit 25" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND24 ,Set/Clear Pending Bit 24" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND23 ,Set/Clear Pending Bit 23" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22 ,Set/Clear Pending Bit 22" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND21 ,Set/Clear Pending Bit 21" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND20 ,Set/Clear Pending Bit 20" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19 ,Set/Clear Pending Bit 19" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND18 ,Set/Clear Pending Bit 18" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND17 ,Set/Clear Pending Bit 17" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16 ,Set/Clear Pending Bit 16" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND15 ,Set/Clear Pending Bit 15" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND14 ,Set/Clear Pending Bit 14" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13 ,Set/Clear Pending Bit 13" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND12 ,Set/Clear Pending Bit 12" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND11 ,Set/Clear Pending Bit 11" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10 ,Set/Clear Pending Bit 10" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND9 ,Set/Clear Pending Bit 9" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND8 ,Set/Clear Pending Bit 8" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7 ,Set/Clear Pending Bit 7" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND6 ,Set/Clear Pending Bit 6" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND5 ,Set/Clear Pending Bit 5" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4 ,Set/Clear Pending Bit 4" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND3 ,Set/Clear Pending Bit 3" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND2 ,Set/Clear Pending Bit 2" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1 ,Set/Clear Pending Bit 1" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND0 ,Set/Clear Pending Bit 0" "Not pending,Pending" group.long 0x10300++0x03 line.long 0x0 "GICR_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE31 ,Set/Clear Active Bit 31" "Not active,Active" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRACTIVE30 ,Set/Clear Active Bit 30" "Not active,Active" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRACTIVE29 ,Set/Clear Active Bit 29" "Not active,Active" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE28 ,Set/Clear Active Bit 28" "Not active,Active" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRACTIVE27 ,Set/Clear Active Bit 27" "Not active,Active" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRACTIVE26 ,Set/Clear Active Bit 26" "Not active,Active" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE25 ,Set/Clear Active Bit 25" "Not active,Active" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRACTIVE24 ,Set/Clear Active Bit 24" "Not active,Active" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRACTIVE23 ,Set/Clear Active Bit 23" "Not active,Active" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE22 ,Set/Clear Active Bit 22" "Not active,Active" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRACTIVE21 ,Set/Clear Active Bit 21" "Not active,Active" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRACTIVE20 ,Set/Clear Active Bit 20" "Not active,Active" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE19 ,Set/Clear Active Bit 19" "Not active,Active" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRACTIVE18 ,Set/Clear Active Bit 18" "Not active,Active" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRACTIVE17 ,Set/Clear Active Bit 17" "Not active,Active" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE16 ,Set/Clear Active Bit 16" "Not active,Active" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRACTIVE15 ,Set/Clear Active Bit 15" "Not active,Active" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRACTIVE14 ,Set/Clear Active Bit 14" "Not active,Active" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE13 ,Set/Clear Active Bit 13" "Not active,Active" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRACTIVE12 ,Set/Clear Active Bit 12" "Not active,Active" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRACTIVE11 ,Set/Clear Active Bit 11" "Not active,Active" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE10 ,Set/Clear Active Bit 10" "Not active,Active" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRACTIVE9 ,Set/Clear Active Bit 9" "Not active,Active" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRACTIVE8 ,Set/Clear Active Bit 8" "Not active,Active" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE7 ,Set/Clear Active Bit 7" "Not active,Active" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRACTIVE6 ,Set/Clear Active Bit 6" "Not active,Active" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRACTIVE5 ,Set/Clear Active Bit 5" "Not active,Active" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE4 ,Set/Clear Active Bit 4" "Not active,Active" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRACTIVE3 ,Set/Clear Active Bit 3" "Not active,Active" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRACTIVE2 ,Set/Clear Active Bit 2" "Not active,Active" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE1 ,Set/Clear Active Bit 1" "Not active,Active" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRACTIVE0 ,Set/Clear Active Bit 0" "Not active,Active" textline " " width 18. group.long 0x10400++0x03 line.long 0x00 "GICR_IPRIORITYR0,Interrupt Priority Register 0" hexmask.long.byte 0x00 24.--31. 1. " INTID3 ,Interrupt ID3 Priority/Priority Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " INTID2 ,Interrupt ID2 Priority/Priority Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " INTID1 ,Interrupt ID1 Priority/Priority Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " INTID0 ,Interrupt ID0 Priority/Priority Byte Offset 0 " group.long 0x10404++0x03 line.long 0x00 "GICR_IPRIORITYR1,Interrupt Priority Register 1" hexmask.long.byte 0x00 24.--31. 1. " INTID7 ,Interrupt ID7 Priority/Priority Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " INTID6 ,Interrupt ID6 Priority/Priority Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " INTID5 ,Interrupt ID5 Priority/Priority Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " INTID4 ,Interrupt ID4 Priority/Priority Byte Offset 4 " group.long 0x10408++0x03 line.long 0x00 "GICR_IPRIORITYR2,Interrupt Priority Register 2" hexmask.long.byte 0x00 24.--31. 1. " INTID11 ,Interrupt ID11 Priority/Priority Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " INTID10 ,Interrupt ID10 Priority/Priority Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " INTID9 ,Interrupt ID9 Priority/Priority Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " INTID8 ,Interrupt ID8 Priority/Priority Byte Offset 8 " group.long 0x1040C++0x03 line.long 0x00 "GICR_IPRIORITYR3,Interrupt Priority Register 3" hexmask.long.byte 0x00 24.--31. 1. " INTID15 ,Interrupt ID15 Priority/Priority Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " INTID14 ,Interrupt ID14 Priority/Priority Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " INTID13 ,Interrupt ID13 Priority/Priority Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " INTID12 ,Interrupt ID12 Priority/Priority Byte Offset 12 " group.long 0x10410++0x03 line.long 0x00 "GICR_IPRIORITYR4,Interrupt Priority Register 4" hexmask.long.byte 0x00 24.--31. 1. " INTID19 ,Interrupt ID19 Priority/Priority Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " INTID18 ,Interrupt ID18 Priority/Priority Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " INTID17 ,Interrupt ID17 Priority/Priority Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " INTID16 ,Interrupt ID16 Priority/Priority Byte Offset 16 " group.long 0x10414++0x03 line.long 0x00 "GICR_IPRIORITYR5,Interrupt Priority Register 5" hexmask.long.byte 0x00 24.--31. 1. " INTID23 ,Interrupt ID23 Priority/Priority Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " INTID22 ,Interrupt ID22 Priority/Priority Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " INTID21 ,Interrupt ID21 Priority/Priority Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " INTID20 ,Interrupt ID20 Priority/Priority Byte Offset 20 " group.long 0x10418++0x03 line.long 0x00 "GICR_IPRIORITYR6,Interrupt Priority Register 6" hexmask.long.byte 0x00 24.--31. 1. " INTID27 ,Interrupt ID27 Priority/Priority Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " INTID26 ,Interrupt ID26 Priority/Priority Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " INTID25 ,Interrupt ID25 Priority/Priority Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " INTID24 ,Interrupt ID24 Priority/Priority Byte Offset 24 " group.long 0x1041C++0x03 line.long 0x00 "GICR_IPRIORITYR7,Interrupt Priority Register 7" hexmask.long.byte 0x00 24.--31. 1. " INTID31 ,Interrupt ID31 Priority/Priority Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " INTID30 ,Interrupt ID30 Priority/Priority Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " INTID29 ,Interrupt ID29 Priority/Priority Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " INTID28 ,Interrupt ID28 Priority/Priority Byte Offset 28 " textline " " rgroup.long 0x10C00++0x03 line.long 0x00 "GICR_ICFGR0,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SGI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (SGI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SGI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (SGI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (SGI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (SGI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (SGI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (SGI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (SGI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (SGI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (SGI)" "Level,Edge" group.long 0x10C04++0x03 line.long 0x00 "GICR_ICFGR1,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (PPI)" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14 (PPI)" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (PPI)" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11 (PPI)" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9 (PPI)" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8 (PPI)" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6 (PPI)" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5 (PPI)" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4 (PPI)" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3 (PPI)" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2 (PPI)" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1 (PPI)" "Level,Edge" textline " " width 18. if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x10D00)) group.long 0x10D00++0x03 line.long 0x0 "GICR_IGRPMODR0,Interrupt Group Modifier Register 0" bitfld.long 0x00 31. " GMB31 ,Group Modifier Bit 31" "0,1" bitfld.long 0x00 30. " GMB30 ,Group Modifier Bit 30" "0,1" bitfld.long 0x00 29. " GMB29 ,Group Modifier Bit 29" "0,1" textline " " bitfld.long 0x00 28. " GMB28 ,Group Modifier Bit 28" "0,1" bitfld.long 0x00 27. " GMB27 ,Group Modifier Bit 27" "0,1" bitfld.long 0x00 26. " GMB26 ,Group Modifier Bit 26" "0,1" textline " " bitfld.long 0x00 25. " GMB25 ,Group Modifier Bit 25" "0,1" bitfld.long 0x00 24. " GMB24 ,Group Modifier Bit 24" "0,1" bitfld.long 0x00 23. " GMB23 ,Group Modifier Bit 23" "0,1" textline " " bitfld.long 0x00 22. " GMB22 ,Group Modifier Bit 22" "0,1" bitfld.long 0x00 21. " GMB21 ,Group Modifier Bit 21" "0,1" bitfld.long 0x00 20. " GMB20 ,Group Modifier Bit 20" "0,1" textline " " bitfld.long 0x00 19. " GMB19 ,Group Modifier Bit 19" "0,1" bitfld.long 0x00 18. " GMB18 ,Group Modifier Bit 18" "0,1" bitfld.long 0x00 17. " GMB17 ,Group Modifier Bit 17" "0,1" textline " " bitfld.long 0x00 16. " GMB16 ,Group Modifier Bit 16" "0,1" bitfld.long 0x00 15. " GMB15 ,Group Modifier Bit 15" "0,1" bitfld.long 0x00 14. " GMB14 ,Group Modifier Bit 14" "0,1" textline " " bitfld.long 0x00 13. " GMB13 ,Group Modifier Bit 13" "0,1" bitfld.long 0x00 12. " GMB12 ,Group Modifier Bit 12" "0,1" bitfld.long 0x00 11. " GMB11 ,Group Modifier Bit 11" "0,1" textline " " bitfld.long 0x00 10. " GMB10 ,Group Modifier Bit 10" "0,1" bitfld.long 0x00 9. " GMB9 ,Group Modifier Bit 9" "0,1" bitfld.long 0x00 8. " GMB8 ,Group Modifier Bit 8" "0,1" textline " " bitfld.long 0x00 7. " GMB7 ,Group Modifier Bit 7" "0,1" bitfld.long 0x00 6. " GMB6 ,Group Modifier Bit 6" "0,1" bitfld.long 0x00 5. " GMB5 ,Group Modifier Bit 5" "0,1" textline " " bitfld.long 0x00 4. " GMB4 ,Group Modifier Bit 4" "0,1" bitfld.long 0x00 3. " GMB3 ,Group Modifier Bit 3" "0,1" bitfld.long 0x00 2. " GMB2 ,Group Modifier Bit 2" "0,1" textline " " bitfld.long 0x00 1. " GMB1 ,Group Modifier Bit 1" "0,1" bitfld.long 0x00 0. " GMB0 ,Group Modifier Bit 0" "0,1" textline " " else hgroup.long 0x10D00++0x03 hide.long 0x0 "GICR_IGRPMODR0,Interrupt Group Modifier Register 0" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x10E00)) group.long 0x10E00++0x03 line.long 0x00 "GICR_NSACR,Non-secure Access Control Register" bitfld.long 0x00 30.--31. " NS_ACCESS15 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID15" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 28.--29. " NS_ACCESS14 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID14" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 26.--27. " NS_ACCESS13 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID13" "No access,G0S,G0S/G1S,?..." textline " " bitfld.long 0x00 24.--25. " NS_ACCESS12 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID12" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 22.--23. " NS_ACCESS11 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID11" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 20.--21. " NS_ACCESS10 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID10" "No access,G0S,G0S/G1S,?..." textline " " bitfld.long 0x00 18.--19. " NS_ACCESS9 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID9" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 16.--17. " NS_ACCESS8 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID8" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 14.--15. " NS_ACCESS7 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID7" "No access,G0S,G0S/G1S,?..." textline " " bitfld.long 0x00 12.--13. " NS_ACCESS6 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID6" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 10.--11. " NS_ACCESS5 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID5" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 8.--9. " NS_ACCESS4 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID4" "No access,G0S,G0S/G1S,?..." textline " " bitfld.long 0x00 6.--7. " NS_ACCESS3 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID3" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 4.--5. " NS_ACCESS2 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID2" "No access,G0S,G0S/G1S,?..." bitfld.long 0x00 2.--3. " NS_ACCESS1 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID1" "No access,G0S,G0S/G1S,?..." textline " " bitfld.long 0x00 0.--1. " NS_ACCESS0 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID0" "No access,G0S,G0S/G1S,?..." textline " " else hgroup.long 0x10E00++0x03 hide.long 0x00 "GICR_NSACR,Non-secure Access Control Register" textline " " textline " " textline " " textline " " textline " " endif rgroup.long 0x1C000++0x03 line.long 0x00 "GICR_MISCSTATUSR,Miscellaneous Status Register" bitfld.long 0x00 31. " CPU_AS ,CPU active state. This bit returns the actual status of the cpu_active signal for the core corresponding to the Redistributor whose register is being read" "Low,High" bitfld.long 0x00 2. " ENABLEGRP1_S ,EnableGrp1 Secure" "0,1" bitfld.long 0x00 1. " ENABLEGRP1_NS ,EnableGrp1 Non-secure" "0,1" textline " " bitfld.long 0x00 0. " ENABLEGRP0 ,EnableGrp0" "0,1" rgroup.long 0x1C080++0x03 line.long 0x00 "GICR_PPISR,Private Peripheral Interrupt Status Register" bitfld.long 0x00 31. " PPI31S ,Actual status of the PPI31 input signal" "Low,High" bitfld.long 0x00 30. " PPI30S ,Actual status of the PPI30 input signal" "Low,High" bitfld.long 0x00 29. " PPI29S ,Actual status of the PPI29 input signal" "Low,High" textline " " bitfld.long 0x00 28. " PPI28S ,Actual status of the PPI28 input signal" "Low,High" bitfld.long 0x00 27. " PPI27S ,Actual status of the PPI27 input signal" "Low,High" bitfld.long 0x00 26. " PPI26S ,Actual status of the PPI26 input signal" "Low,High" textline " " bitfld.long 0x00 25. " PPI25S ,Actual status of the PPI25 input signal" "Low,High" bitfld.long 0x00 24. " PPI24S ,Actual status of the PPI24 input signal" "Low,High" bitfld.long 0x00 23. " PPI23S ,Actual status of the PPI23 input signal" "Low,High" textline " " bitfld.long 0x00 22. " PPI22S ,Actual status of the PPI22 input signal" "Low,High" bitfld.long 0x00 21. " PPI21S ,Actual status of the PPI21 input signal" "Low,High" bitfld.long 0x00 20. " PPI20S ,Actual status of the PPI20 input signal" "Low,High" textline " " bitfld.long 0x00 19. " PPI19S ,Actual status of the PPI19 input signal" "Low,High" bitfld.long 0x00 18. " PPI18S ,Actual status of the PPI18 input signal" "Low,High" bitfld.long 0x00 17. " PPI17S ,Actual status of the PPI17 input signal" "Low,High" textline " " bitfld.long 0x00 16. " PPI16S ,Actual status of the PPI16 input signal" "Low,High" tree.end width 12. tree "Peripheral/Component ID Registers" rgroup.long 0xFFE0++0x03 line.long 0x00 "GICR_PIDR0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PART_0 ,Part number[7:0]" rgroup.long 0xFFE4++0x03 line.long 0x00 "GICR_PIDR1,Peripheral ID1 Register" bitfld.long 0x00 4.--7. " DES_1 ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " PART_1 , Part number[11:8]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFFE8++0x03 line.long 0x00 "GICR_PIDR2,Peripheral ID2 Register" bitfld.long 0x00 4.--7. " ARCHREV ,Identifies the version of the GIC architecture with which the GIC-500 complies" "Reserved,Reserved,Reserved,v3.0,?..." bitfld.long 0x00 3. " JEDEC ,Indicates that a JEDEC-assigned JEP106 identity code is used" "Low,High" bitfld.long 0x00 0.--2. " DES_1 ,JEP106 identity code [6:4]" "0,1,2,3,4,5,6,7" rgroup.long 0xFFEC++0x03 line.long 0x00 "GICR_PIDR3,Peripheral ID3 Register" bitfld.long 0x00 4.--7. " REVAND ,Manufacturer defined revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " CMOD ,Indicates if the customer has modified the behavior of the component" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFFD0++0x03 line.long 0x00 "GICR_PIDR4,Peripheral ID4 Register" bitfld.long 0x00 4.--7. " SIZE ,64 KB software visible page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " DES_2 ,ARM implementation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hgroup.long 0xFFD4++0x03 hide.long 0x00 "GICR_PIDR5,Peripheral ID5 Register" hgroup.long 0xFFD8++0x03 hide.long 0x00 "GICR_PIDR6,Peripheral ID6 Register" hgroup.long 0xFFDC++0x03 hide.long 0x00 "GICR_PIDR7,Peripheral ID7 Register" rgroup.long 0xFFF0++0x03 line.long 0x00 "GICR_CIDR0,Component ID0 Register" hexmask.long 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFF4++0x03 line.long 0x00 "GICR_CIDR1,Component ID1 Register" hexmask.long 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFF8++0x03 line.long 0x00 "GICR_CIDR2,Component ID2 Register" hexmask.long 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" rgroup.long 0xFFFC++0x03 line.long 0x00 "GICR_CIDR3,Component ID3 Register" hexmask.long 0x00 0.--7. 1. " FIXVAL ,ARM-defined fixed values for the preamble for component discovery" tree.end tree.end width 0x0B sif COMP.AVAILABLE("GICC") base COMP.BASE("GICC",-1.) width 14. tree "CPU Interface" if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICC",-1.))) group.long 0x00++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register" bitfld.long 0x00 10. " EOIMODENS ,Controls the behavior of Non-secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID" bitfld.long 0x00 9. " EOIMODES ,Controls the behavior of Secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID" bitfld.long 0x00 8. " IRQBYPDISGRP1 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 1" "Signaled,Not signaled" textline " " bitfld.long 0x00 7. " FIQBYPDISGRP1 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 1" "Signaled,Not signaled" bitfld.long 0x00 6. " IRQBYPDISGRP0 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 0" "Signaled,Not signaled" bitfld.long 0x00 5. " FIQBYPDISGRP0 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 0" "Signaled,Not signaled" textline " " bitfld.long 0x00 4. " CBPR ,Controls whether GICC_BPR provides common control of preemption to Group 0 and Group 1 interrupts" "Group 0,Both" bitfld.long 0x00 3. " FIQEN ,Controls whether the CPU interface signals Group 0 interrupts to a target PE using the FIQ or IRQ signal" "IRQ,FIQ" bitfld.long 0x00 1. " ENABLEGRP1 ,Enables the signaling of Group 1 interrupts by the CPU interface to a target PE" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " ENABLEGRP0 ,Enables the signaling of Group 0 interrupts by the CPU interface to a target PE" "Disabled,Enabled" elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400) group.long 0x00++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register" bitfld.long 0x00 9. " EOIMODENS ,Controls the behavior of Non-secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID" bitfld.long 0x00 6. " IRQBYPDISGRP1 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 1" "Signaled,Not signaled" bitfld.long 0x00 5. " FIQBYPDISGRP1 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 1" "Signaled,Not signaled" textline " " bitfld.long 0x00 0. " ENABLEGRP1 ,Enables the signaling of Group 1 interrupts by the CPU interface to a target PE" "Disabled,Enabled" else group.long 0x00++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register" bitfld.long 0x00 9. " EOIMODE ,Controls the behavior of accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID" bitfld.long 0x00 8. " IRQBYPDISGRP1 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 1" "Signaled,Not signaled" bitfld.long 0x00 7. " FIQBYPDISGRP1 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 1" "Signaled,Not signaled" textline " " bitfld.long 0x00 6. " IRQBYPDISGRP0 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 0" "Signaled,Not signaled" bitfld.long 0x00 5. " FIQBYPDISGRP0 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 0" "Signaled,Not signaled" bitfld.long 0x00 4. " CBPR ,Controls whether GICC_BPR provides common control of preemption to Group 0 and Group 1 interrupts" "Group 0,Both" textline " " bitfld.long 0x00 3. " FIQEN ,Controls whether the CPU interface signals Group 0 interrupts to a target PE using the FIQ or IRQ signal" "IRQ,FIQ" bitfld.long 0x00 1. " ENABLEGRP1 ,Enables the signaling of Group 1 interrupts by the CPU interface to a target PE" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Enables the signaling of Group 0 interrupts by the CPU interface to a target PE" "Disabled,Enabled" endif textline " " group.long 0x04++0x03 line.long 0x00 "GICC_PMR,Interrupt Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority mask level for CPU interface" group.long 0x08++0x03 line.long 0x00 "GICC_BPR,Binary Point Register" bitfld.long 0x00 0.--2. " BP ,Binary point" "0,1,2,3,4,5,6,7" hgroup.long 0x0C++0x03 hide.long 0x00 "GICC_IAR,Interrupt Acknowledge Register" in wgroup.long 0x10++0x03 line.long 0x00 "GICC_EOIR,End Of Interrupt Register" hexmask.long.tbyte 0x00 0.--23. 1. " INTID ,Interrupt ID" rgroup.long 0x14++0x03 line.long 0x00 "GICC_RPR,Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority value of highest priority interrupt" rgroup.long 0x18++0x03 line.long 0x00 "GICC_HPPIR,Highest Priority Pending Interrupt Register" hexmask.long.tbyte 0x00 0.--23. 1. " INTID ,Interrupt ID" group.long 0x1C++0x03 line.long 0x00 "GICC_ABPR,Aliased Binary Point Register" bitfld.long 0x00 0.--2. " BP ,Binary point" "0,1,2,3,4,5,6,7" hgroup.long 0x20++0x03 hide.long 0x00 "GICC_AIAR,Aliased Interrupt Acknowledge Register" in wgroup.long 0x24++0x03 line.long 0x00 "GICC_AEOIR,Aliased End of Interrupt Register" hexmask.long.tbyte 0x00 0.--23. 1. " INTID ,Interrupt ID" rgroup.long 0x28++0x03 line.long 0x00 "GICC_AHPPIR,Aliased Highest Priority Pending Interrupt Register" hexmask.long.tbyte 0x00 0.--23. 1. " INTID ,Interrupt ID" rgroup.long 0x2C++0x03 line.long 0x00 "GICC_STATUSR,CPU Interface Status Register" bitfld.long 0x00 4. " ASV ,Attempted security violation" "Not detected,Detected" bitfld.long 0x00 3. " WROD ,Write to an RO location" "Not detected,Detected" bitfld.long 0x00 2. " RWOD ,Read of a WO location" "Not detected,Detected" textline " " bitfld.long 0x00 1. " WRD ,Write to a reserved location" "Not detected,Detected" bitfld.long 0x00 0. " RRD ,Read of a reserved location" "Not detected,Detected" group.long 0xD0++0x03 line.long 0x00 "GICC_APR0,Active Priorities Register 0" group.long 0xD4++0x03 line.long 0x00 "GICC_APR1,Active Priorities Register 1" group.long 0xD8++0x03 line.long 0x00 "GICC_APR2,Active Priorities Register 2" group.long 0xDC++0x03 line.long 0x00 "GICC_APR3,Active Priorities Register 3" group.long 0xE0++0x03 line.long 0x00 "GICC_NSAPR0,Non-Secure Active Priorities Register 0" group.long 0xE4++0x03 line.long 0x00 "GICC_NSAPR1,Non-Secure Active Priorities Register 1" group.long 0xE8++0x03 line.long 0x00 "GICC_NSAPR2,Non-Secure Active Priorities Register 2" group.long 0xEC++0x03 line.long 0x00 "GICC_NSAPR3,Non-Secure Active Priorities Register 3" rgroup.long 0xFC++0x03 line.long 0x00 "GICC_IIDR,CPU Interface Identification Register" hexmask.long.word 0x00 20.--31. 1. " PRODID ,Product ID" bitfld.long 0x00 16.--19. " ARCHVER ,The version of the GIC architecture that is implemented" ",,,GICv3,?..." bitfld.long 0x00 12.--15. " REV ,Revision number for the CPU interface" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" wgroup.long 0x1000++0x03 line.long 0x00 "GICC_DIR,Deactivate Interrupt Register" hexmask.long.tbyte 0x00 0.--23. 1. " INTID ,Interrupt ID" tree.end width 0x0b endif sif COMP.AVAILABLE("GICH") base COMP.BASE("GICH",-1.) width 13. tree "Virtual CPU Control Interface" group.long 0x00++0x03 line.long 0x00 "GICH_HCR,Hypervisor Control Register" bitfld.long 0x00 27.--31. " EOICOUNT ,Counts the number of EOIs received that do not have a corresponding entry in the List registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 7. " VGRP1DIE ,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 6. " VGRP1EIE ,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. " VGRP0DIE ,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 4. " VGRP0EIE ,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. " NPIE ,No Pending Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. " LRENPIE ,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. " UIE ,Underflow Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " EN ,Virtual CPU interface Enable" "Disabled,Enabled" rgroup.long 0x04++0x03 line.long 0x00 "GICH_VTR,Virtual Type Register" bitfld.long 0x00 29.--31. " PRIBITS ,Number of priority bits" "1,2,3,4,5,6,7,8" bitfld.long 0x00 26.--28. " PREBITS ,Number of pre-emption bits" "1,2,3,4,5,6,7,8" bitfld.long 0x00 23.--25. " IDBITS ,The number of virtual interrupt identifier bits supported" "16 bits,24 bits,?..." textline " " bitfld.long 0x00 22. " SEIS ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not supported,Supported" bitfld.long 0x00 21. " A3V ,Affinity 3 valid" "Invalid,Valid" bitfld.long 0x00 0.--4. " LISTREGS ,List regs number" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" group.long 0x08++0x03 line.long 0x00 "GICH_VMCR,Virtual Machine Control Register" hexmask.long.byte 0x00 24.--31. 1. " VPMR ,Virtual priority mask" bitfld.long 0x00 21.--23. " VBPR0 ,Defines the point at which the priority value fields split into two parts the group priority field and the subpriority field (group 0)" "0,1,2,3,4,5,6,7" bitfld.long 0x00 18.--20. " VBPR1 ,Defines the point at which the priority value fields split into two parts the group priority field and the subpriority field (group 1)" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9. " VEOIM ,Virtual EOImode. DP - Drop the priority / ID - interrupt deactivate" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID" textline " " bitfld.long 0x00 4. " VCBPR ,Virtual Common Binary Point Register" "ABPR,BPR" bitfld.long 0x00 3. " VFIQEN ,Virtual FIQ enable" "Disabled,Enabled" bitfld.long 0x00 2. " VACKCTL ,Virtual AckCtl" "INTID=1022,INTID=corresponding" bitfld.long 0x00 1. " VENG1 ,Virtual interrupt enable for group 1" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " VENG0 ,Virtual interrupt enable for group 0" "Disabled,Enabled" rgroup.long 0x10++0x03 line.long 0x00 "GICH_MISR,Maintenance Interrupt Status Register" bitfld.long 0x00 7. " VGRP1D ,vPE Group 1 Disabled maintenance interrupt assertion" "Not asserted,Asserted" bitfld.long 0x00 6. " VGRP1E ,vPE Group 1 Enabled maintenance interrupt assertion" "Not asserted,Asserted" bitfld.long 0x00 5. " VGRP0D ,vPE Group 0 Disabled maintenance interrupt assertion" "Not asserted,Asserted" bitfld.long 0x00 4. " VGRP0E ,vPE Group 0 Enabled maintenance interrupt assertion" "Not asserted,Asserted" textline " " bitfld.long 0x00 3. " NP ,No Pending maintenance interrupt assertion" "Not asserted,Asserted" bitfld.long 0x00 2. " LRENP ,List Register Entry Not Present maintenance interrupt assertion" "Not asserted,Asserted" bitfld.long 0x00 1. " U ,Underflow maintenance interrupt assertion" "Not asserted,Asserted" bitfld.long 0x00 0. " EOI ,End Of Interrupt maintenance interrupt assertion" "Not asserted,Asserted" rgroup.long 0x20++0x03 line.long 0x00 "GICH_EISR0,End of Interrupt Status Register" bitfld.long 0x00 15. " STATUS15 ,EOI maintenance interrupt status for List register 15" "No interrupt,Interrupt" bitfld.long 0x00 14. " STATUS14 ,EOI maintenance interrupt status for List register 14" "No interrupt,Interrupt" bitfld.long 0x00 13. " STATUS13 ,EOI maintenance interrupt status for List register 13" "No interrupt,Interrupt" textline " " bitfld.long 0x00 12. " STATUS12 ,EOI maintenance interrupt status for List register 12" "No interrupt,Interrupt" bitfld.long 0x00 11. " STATUS11 ,EOI maintenance interrupt status for List register 11" "No interrupt,Interrupt" bitfld.long 0x00 10. " STATUS10 ,EOI maintenance interrupt status for List register 10" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " STATUS9 ,EOI maintenance interrupt status for List register 9" "No interrupt,Interrupt" bitfld.long 0x00 8. " STATUS8 ,EOI maintenance interrupt status for List register 8" "No interrupt,Interrupt" bitfld.long 0x00 7. " STATUS7 ,EOI maintenance interrupt status for List register 7" "No interrupt,Interrupt" textline " " bitfld.long 0x00 6. " STATUS6 ,EOI maintenance interrupt status for List register 6" "No interrupt,Interrupt" bitfld.long 0x00 5. " STATUS5 ,EOI maintenance interrupt status for List register 5" "No interrupt,Interrupt" bitfld.long 0x00 4. " STATUS4 ,EOI maintenance interrupt status for List register 4" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " STATUS3 ,EOI maintenance interrupt status for List register 3" "No interrupt,Interrupt" bitfld.long 0x00 2. " STATUS2 ,EOI maintenance interrupt status for List register 2" "No interrupt,Interrupt" bitfld.long 0x00 1. " STATUS1 ,EOI maintenance interrupt status for List register 1" "No interrupt,Interrupt" textline " " bitfld.long 0x00 0. " STATUS0 ,EOI maintenance interrupt status for List register 0" "No interrupt,Interrupt" rgroup.long 0x30++0x03 line.long 0x00 "GICH_ELRSR0,Empty List register Status Register" bitfld.long 0x00 15. " STATUS15 ,Status bit for List register 15" "No interrupt,Interrupt" bitfld.long 0x00 14. " STATUS14 ,Status bit for List register 14" "No interrupt,Interrupt" bitfld.long 0x00 13. " STATUS13 ,Status bit for List register 13" "No interrupt,Interrupt" textline " " bitfld.long 0x00 12. " STATUS12 ,Status bit for List register 12" "No interrupt,Interrupt" bitfld.long 0x00 11. " STATUS11 ,Status bit for List register 11" "No interrupt,Interrupt" bitfld.long 0x00 10. " STATUS10 ,Status bit for List register 10" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " STATUS9 ,Status bit for List register 9" "No interrupt,Interrupt" bitfld.long 0x00 8. " STATUS8 ,Status bit for List register 8" "No interrupt,Interrupt" bitfld.long 0x00 7. " STATUS7 ,Status bit for List register 7" "No interrupt,Interrupt" textline " " bitfld.long 0x00 6. " STATUS6 ,Status bit for List register 6" "No interrupt,Interrupt" bitfld.long 0x00 5. " STATUS5 ,Status bit for List register 5" "No interrupt,Interrupt" bitfld.long 0x00 4. " STATUS4 ,Status bit for List register 4" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " STATUS3 ,Status bit for List register 3" "No interrupt,Interrupt" bitfld.long 0x00 2. " STATUS2 ,Status bit for List register 2" "No interrupt,Interrupt" bitfld.long 0x00 1. " STATUS1 ,Status bit for List register 1" "No interrupt,Interrupt" textline " " bitfld.long 0x00 0. " STATUS0 ,Status bit for List register 0" "No interrupt,Interrupt" textline " " group.long 0xF0++0x03 line.long 0x00 "GICH_APR0,Active Priorities Register 0" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" group.long 0xF4++0x03 line.long 0x00 "GICH_APR1,Active Priorities Register 1" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" group.long 0xF8++0x03 line.long 0x00 "GICH_APR2,Active Priorities Register 2" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" group.long 0xFC++0x03 line.long 0x00 "GICH_APR3,Active Priorities Register 3" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" textline " " group.long 0x100++0x03 line.long 0x00 "GICH_LR0,List Register 0" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x104++0x03 line.long 0x00 "GICH_LR1,List Register 1" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x108++0x03 line.long 0x00 "GICH_LR2,List Register 2" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x10C++0x03 line.long 0x00 "GICH_LR3,List Register 3" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x110++0x03 line.long 0x00 "GICH_LR4,List Register 4" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x114++0x03 line.long 0x00 "GICH_LR5,List Register 5" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x118++0x03 line.long 0x00 "GICH_LR6,List Register 6" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x11C++0x03 line.long 0x00 "GICH_LR7,List Register 7" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x120++0x03 line.long 0x00 "GICH_LR8,List Register 8" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x124++0x03 line.long 0x00 "GICH_LR9,List Register 9" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x128++0x03 line.long 0x00 "GICH_LR10,List Register 10" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x12C++0x03 line.long 0x00 "GICH_LR11,List Register 11" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x130++0x03 line.long 0x00 "GICH_LR12,List Register 12" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x134++0x03 line.long 0x00 "GICH_LR13,List Register 13" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" group.long 0x138++0x03 line.long 0x00 "GICH_LR14,List Register 14" bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware" bitfld.long 0x00 30. " GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1" bitfld.long 0x00 28.--29. " STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending" bitfld.long 0x00 23.--27. " PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 10.--19. 1. " PINTID ,Physical interrupt ID" hexmask.long.word 0x00 0.--9. 1. " VINTID ,Virtual interrupt ID" tree.end width 0x0b endif sif COMP.AVAILABLE("GICV") base COMP.BASE("GICV",-1.) width 14. tree "Virtual CPU Interface" group.long 0x00++0x03 line.long 0x00 "GICV_CTLR,VM Control Register" bitfld.long 0x00 9. " EOIMODE ,Controls the behaviour of Non-secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID" bitfld.long 0x00 4. " CBPR ,Controls whether GICV_BPR affects both Group 0 and Group 1 interrupts" "Group 0,Both" bitfld.long 0x00 3. " FIQEN ,FIQ Enable" "Disabled,Enabled" bitfld.long 0x00 2. " ACKCTL ,Acknowledge control. Return ID of the corresponding interrupt" "1022,Corresponding" textline " " bitfld.long 0x00 1. " ENABLEGRP1 ,Enables the signalling of Group 1 interrupts by the CPU interface to the virtual machine" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Enables the signalling of Group 0 interrupts by the CPU interface to the virtual machine" "Disabled,Enabled" group.long 0x04++0x03 line.long 0x00 "GICV_PMR,VM Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority mask level for the virtual CPU interface" group.long 0x08++0x03 line.long 0x00 "GICV_BPR,VM Binary Point Register" bitfld.long 0x00 0.--2. " BP ,Binary point" "0,1,2,3,4,5,6,7" rgroup.long 0x0C++0x03 line.long 0x00 "GICV_IAR,VM Interrupt Acknowledge Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" wgroup.long 0x10++0x03 line.long 0x00 "GICV_EOIR,VM End Of Interrupt Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" rgroup.long 0x14++0x03 line.long 0x00 "GICV_RPR,VM Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority value of highest priority interrupt" rgroup.long 0x18++0x03 line.long 0x00 "GICV_HPPIR,VM Highest Priority Pending Interrupt Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" group.long 0x1C++0x03 line.long 0x00 "GICV_ABPR,VM Aliased Binary Point Register" bitfld.long 0x00 0.--2. " BP ,Binary point" "0,1,2,3,4,5,6,7" rgroup.long 0x20++0x03 line.long 0x00 "GICV_AIAR,VM Aliased Interrupt Acknowledge Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" wgroup.long 0x24++0x03 line.long 0x00 "GICV_AEOIR,VM Aliased End of Interrupt Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" rgroup.long 0x28++0x03 line.long 0x00 "GICV_AHPPIR,VM Aliased Highest Priority Pending Interrupt Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" textline "" group.long 0xD0++0x03 line.long 0x00 "GICV_APR0,VM Active Priority Register 0" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" group.long 0xD4++0x03 line.long 0x00 "GICV_APR1,VM Active Priority Register 1" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" group.long 0xD8++0x03 line.long 0x00 "GICV_APR2,VM Active Priority Register 2" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" group.long 0xDC++0x03 line.long 0x00 "GICV_APR3,VM Active Priority Register 3" bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1" bitfld.long 0x00 30. " P30 ,Active Priority 30" "0,1" bitfld.long 0x00 29. " P29 ,Active Priority 29" "0,1" bitfld.long 0x00 28. " P28 ,Active Priority 28" "0,1" textline " " bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1" bitfld.long 0x00 26. " P26 ,Active Priority 26" "0,1" bitfld.long 0x00 25. " P25 ,Active Priority 25" "0,1" bitfld.long 0x00 24. " P24 ,Active Priority 24" "0,1" textline " " bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1" bitfld.long 0x00 22. " P22 ,Active Priority 22" "0,1" bitfld.long 0x00 21. " P21 ,Active Priority 21" "0,1" bitfld.long 0x00 20. " P20 ,Active Priority 20" "0,1" textline " " bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1" bitfld.long 0x00 18. " P18 ,Active Priority 18" "0,1" bitfld.long 0x00 17. " P17 ,Active Priority 17" "0,1" bitfld.long 0x00 16. " P16 ,Active Priority 16" "0,1" textline " " bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1" bitfld.long 0x00 14. " P14 ,Active Priority 14" "0,1" bitfld.long 0x00 13. " P13 ,Active Priority 13" "0,1" bitfld.long 0x00 12. " P12 ,Active Priority 12" "0,1" textline " " bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1" bitfld.long 0x00 10. " P10 ,Active Priority 10" "0,1" bitfld.long 0x00 9. " P9 ,Active Priority 9" "0,1" bitfld.long 0x00 8. " P8 ,Active Priority 8" "0,1" textline " " bitfld.long 0x00 7. " P7 ,Active Priority 7" "0,1" bitfld.long 0x00 6. " P6 ,Active Priority 6" "0,1" bitfld.long 0x00 5. " P5 ,Active Priority 5" "0,1" bitfld.long 0x00 4. " P4 ,Active Priority 4" "0,1" textline " " bitfld.long 0x00 3. " P3 ,Active Priority 3" "0,1" bitfld.long 0x00 2. " P2 ,Active Priority 2" "0,1" bitfld.long 0x00 1. " P1 ,Active Priority 1" "0,1" bitfld.long 0x00 0. " P0 ,Active Priority 0" "0,1" textline " " rgroup.long 0xFC++0x03 line.long 0x00 "GICV_IIDR,Virtual Machine CPU Interface Identification Register" hexmask.long.word 0x00 20.--31. 1. " PRODID ,Product ID" bitfld.long 0x00 16.--19. " ARCHVER ,The version of the GIC architecture that is implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " REV ,Revision number for the CPU interface" ",,,GICv3,?..." hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" wgroup.long 0x1000++0x03 line.long 0x00 "GICV_DIR,VM Deactivate Interrupt Register" hexmask.long 0x00 0.--24. 1. " INTID ,Interrupt ID" tree.end width 0x0b endif width 0x0B tree.end tree.end elif (CORENAME()=="CORTEXM33F") tree.close "Core Registers (Cortex-M33F)" AUTOINDENT.PUSH AUTOINDENT.OFF tree "System Control" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 12. group.long 0x08++0x03 line.long 0x00 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 29. " EXTEXCLALL ,Allows external exclusive operations to be used in a configuration with no MPU" "No,Yes" bitfld.long 0x00 12. " DISITMATBFLUSH ,Disables ITM and DWT ATB flush" "No,Yes" bitfld.long 0x00 10. " FPEXCODIS ,Disables FPU exception outputs" "No,Yes" textline " " bitfld.long 0x00 9. " DISOOFP ,Disables floating-point" "No,Yes" bitfld.long 0x00 2. " DISFOLD ,Disables dual-issue functionality" "No,Yes" bitfld.long 0x00 0. " DISMCYCINT ,Disables interruption of multi-cycle" "No,Yes" group.long 0x0C++0x0F line.long 0x00 "CPPWR,Coprocessor Power Control Register" bitfld.long 0x00 21. " SUS10 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 20. " SU10 ,This bit indicates and allows modification of whether the state associated with the floating point unit is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 15. " SUS7 ,State unknown Secure only" "Both states,Secure only" textline " " bitfld.long 0x00 14. " SU7 ,This bit indicates and allows modification of whether the state associated with the coprocessor 7 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 13. " SUS6 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 12. " SU6 ,This bit indicates and allows modification of whether the state associated with the coprocessor 6 is permitted to become UNKNOWN" "Not permitted,Permitted" textline " " bitfld.long 0x00 11. " SUS5 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 10. " SU5 ,This bit indicates and allows modification of whether the state associated with the coprocessor 5 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 9. " SUS4 ,State unknown Secure only" "Both states,Secure only" textline " " bitfld.long 0x00 8. " SU4 ,This bit indicates and allows modification of whether the state associated with the coprocessor 4 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 7. " SUS3 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 6. " SU3 ,This bit indicates and allows modification of whether the state associated with the coprocessor 3 is permitted to become UNKNOWN" "Not permitted,Permitted" textline " " bitfld.long 0x00 5. " SUS2 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 4. " SU2 ,This bit indicates and allows modification of whether the state associated with the coprocessor 2 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 3. " SUS1 ,State unknown Secure only" "Both states,Secure only" textline " " bitfld.long 0x00 2. " SU1 ,This bit indicates and allows modification of whether the state associated with the coprocessor 1 is permitted to become UNKNOWN" "Not permitted,Permitted" bitfld.long 0x00 1. " SUS0 ,State unknown Secure only" "Both states,Secure only" bitfld.long 0x00 0. " SU0 ,This bit indicates and allows modification of whether the state associated with the coprocessor 0 is permitted to become UNKNOWN" "Not permitted,Permitted" line.long 0x04 "SYST_CSR,SysTick Control and Status Register" rbitfld.long 0x04 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted" bitfld.long 0x04 2. " CLKSOURCE ,SysTick clock source" "External,Core" bitfld.long 0x04 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick" textline " " bitfld.long 0x04 0. " ENABLE ,Counter Enable" "Disabled,Enabled" line.long 0x08 "SYST_RVR,SysTick Reload Value Register" hexmask.long.tbyte 0x08 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0" line.long 0x0C "SYST_CVR,SysTick Current Value Register" hexmask.long.tbyte 0x0C 0.--23. 1. " CURRENT ,Current counter value" rgroup.long 0x1C++0x03 line.long 0x00 "SYST_CALIB,SysTick Calibration value Register" bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented" bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact" hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing" rgroup.long 0xD00++0x03 line.long 0x00 "CPUID,CPUID Base Register" hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Indicates implementer" bitfld.long 0x00 20.--23. " VARIANT ,Indicates processor revision" "Revision 0,?..." bitfld.long 0x00 16.--19. " ARCHITECTURE ,Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8-M w/ Main extension" textline " " hexmask.long.word 0x00 4.--15. 1. " PARTNO ,Indicates part number" bitfld.long 0x00 0.--3. " REVISION ,Indicates patch release" "Reserved,Reserved,Patch 2,?..." group.long 0xD04++0x23 line.long 0x00 "ICSR,Interrupt Control and State Register" setclrfld.long 0x00 31. 0x00 31. 0x00 30. " PENDNMISET , On writes allows the NMI exception to be set as pending. On reads indicates whether the NMI exception is pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x00 27. " PENDSVSET , On writes allows the PendSV exception for the selected Security state to be set as pending. On reads indicates whether the PendSV for the selected Security state exception is pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x00 25. " PENDSTSET ,On writes, sets the SysTick exception as pending. On reads, indicates the current state of the exception" "Not pending,Pending" textline " " bitfld.long 0x00 24. " STTNS ,Controls whether in a single SysTick implementation the SysTick is Secure or Non-secure" "Secure,Non-secure" rbitfld.long 0x00 23. " ISRPREEMPT ,Indicates whether a pending exception will be serviced on exit from debug halt state" "Disabled,Enabled" rbitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt, generated by the NVIC, is pending" "Not pending,Pending" textline " " hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,The exception number of the highest priority pending and enabled interrupt" rbitfld.long 0x00 11. " RETTOBASE ,Indicates whether there is an active exception other than the exception indicated by the current value of the IPSR" "Present,Absent" hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception" line.long 0x04 "VTOR,Vector Table Offset Register" hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Bits[31:7] of the vector table address" line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register" hexmask.long.word 0x08 16.--31. 1. " VECTKEYSTAT ,Vector Key" rbitfld.long 0x08 15. " ENDIANNESS ,Indicates the memory system endianness" "Little endian,Big endian" bitfld.long 0x08 14. " PRIS ,Prioritize Secure exceptions" "Disabled,Enabled" textline " " bitfld.long 0x08 13. " BFHFNMINS ,BusFault BusFault HardFault and NMI Non-secure enable" "Disabled,Enabled" bitfld.long 0x08 8.--10. " PRIGROUP ,Priority grouping. Group priority field bits/Subpriority field bits" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" bitfld.long 0x08 3. " SYSRESETREQS ,System reset request Secure only" "Both states,Secure only" textline " " bitfld.long 0x08 2. " SYSRESETREQ ,System reset request" "Not requested,Requested" bitfld.long 0x08 1. " VECTCLRACTIVE ,Writing 1 to this bit clears all active state information for fixed and configurable exceptions" "No effect,Clear" line.long 0x0C "SCR,System Control Register" bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup" bitfld.long 0x0C 3. " SLEEPDEEPS ,Controls whether the SLEEPDEEP bit is only accessible from the secure state" "Both states,Secure only" bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep" textline " " bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled" line.long 0x10 "CCR,Configuration and Control Register" bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled" bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled" bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled" textline " " bitfld.long 0x10 10. " STKOFHFNMIGN ,Controls the effect of a stack limit violation while executing at a requested priority less than 0" "Not ignored,Ignored" bitfld.long 0x10 8. " BFHFNMIGN ,Determines the effect of precise busfaults on handlers running at a requested priority less than 0" "Not ignored,Ignored" bitfld.long 0x10 4. " DIV_0_TRP ,Controls the trap on divide by 0" "Disabled,Enabled" textline " " bitfld.long 0x10 3. " UNALIGN_TRP ,Controls the trapping of unaligned word or halfword accesses" "Disabled,Enabled" bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Disabled,Enabled" line.long 0x14 "SHPR1,System Handler Priority Register 1" hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of system handler 7, SecureFault" hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6, UsageFault" hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5, BusFault" textline " " hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4, MemManage" line.long 0x18 "SHPR2,System Handler Priority Register 2" hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11, SVCall" line.long 0x1C "SHPR3,System Handler Priority Register 3" hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of system handler 15, SysTick" hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of system handler 14, PendSV" hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of system handler 12, DebugMonitor" line.long 0x20 "SHCSR,System Handler Control and State Register" bitfld.long 0x20 21. " HARDFAULTPENDED ,HardFault exception status" "Not pending,Pending" bitfld.long 0x20 20. " SECUREFAULTPENDED ,SecureFault exception status" "Not pending,Pending" bitfld.long 0x20 19. " SECUREFAULTENA ,SecureFault exception enable" "Disabled,Enabled" textline " " bitfld.long 0x20 18. " USGFAULTENA ,UsageFault exception enable" "Disabled,Enabled" bitfld.long 0x20 17. " BUSFAULTENA ,BusFault exception enable" "Disabled,Enabled" bitfld.long 0x20 16. " MEMFAULTENA ,MemManage exception enable" "Disabled,Enabled" textline " " bitfld.long 0x20 15. " SVCALLPENDED ,SVCall exception status" "Not pending,Pending" bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault exception status" "Not pending,Pending" bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage exception status" "Not pending,Pending" textline " " bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault exception status" "Not pending,Pending" bitfld.long 0x20 11. " SYSTICKACT ,SysTick exception status" "Not active,Active" bitfld.long 0x20 10. " PENDSVACT ,PendSV exception status" "Not active,Active" textline " " bitfld.long 0x20 8. " MONITORACT ,Monitor exception status" "Not active,Active" bitfld.long 0x20 7. " SVCALLACT ,SVCall exception status" "Not active,Active" bitfld.long 0x20 5. " NMIACT ,NMI exception status" "Not active,Active" textline " " bitfld.long 0x20 4. " SECUREFAULTACT ,SecureFault exception status" "Not active,Active" bitfld.long 0x20 3. " USGFAULTACT ,UsageFault exception status" "Not active,Active" bitfld.long 0x20 2. " HARDFAULTACT ,HardFault exception status for the selected Security state" "Not active,Active" textline " " bitfld.long 0x20 1. " BUSFAULTACT ,BusFault exception status" "Not active,Active" bitfld.long 0x20 0. " MEMFAULTACT ,MemManage exception status" "Not active,Active" group.byte 0xD28++0x1 line.byte 0x00 "MMFSR,MemManage Status Register" bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x00 4. " MSTKERR ,Stacking Access Violations" "Not occurred,Occurred" textline " " bitfld.byte 0x00 3. " MUNSTKERR ,Unstacking Access Violations" "Not occurred,Occurred" bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred" bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred" line.byte 0x01 "BFSR,Bus Fault Status Register" bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x01 4. " STKERR ,Derived bus fault (exception entry)" "Not occurred,Occurred" textline " " bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault (exception return)" "Not occurred,Occurred" bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred" bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred" textline " " bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred" group.word 0xD2A++0x1 line.word 0x00 "UFSR,Usage Fault Status Register" eventfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error" eventfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error" eventfld.word 0x00 4. " STKOF ,Stack overflow error" "No error,Error" textline " " eventfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error" eventfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error" eventfld.word 0x00 1. " INVSTATE , Invalid Combination of EPSR and Instruction" "No error,Error" textline " " eventfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error" group.long 0xD2C++0x03 line.long 0x00 "HFSR,HardFault Status Register" bitfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred" bitfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority has been escalated to a HardFault exception" "Not occurred,Occurred" bitfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred" group.long 0xD34++0x0B line.long 0x00 "MMFAR,MemManage Fault Address Register" line.long 0x04 "BFAR,BusFault Address Register" line.long 0x08 "AFSR,Auxiliary Fault Status Register" group.long 0xD88++0x03 line.long 0x00 "CPACR,Coprocessor Access Control Register" bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Denied,Privileged,,Full" bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Denied,Privileged,,Full" bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Denied,Privileged,,Full" bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Denied,Privileged,,Full" bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Denied,Privileged,,Full" bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Denied,Privileged,,Full" textline " " bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Denied,Privileged,,Full" if PER.ADDRESS.isSECUREEX(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD48) group.long 0xD8C++0x03 line.long 0x00 "NSACR,Non-Secure Access Control Register" bitfld.long 0x00 11. " CP11 ,Enables Non-secure access to coprocessor CP11" "Disabled,Enabled" bitfld.long 0x00 10. " CP10 ,Enables Non-secure access to coprocessor CP10" "Disabled,Enabled" bitfld.long 0x00 7. " CP7 ,Enables Non-secure access to coprocessor CP7" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " CP6 ,Enables Non-secure access to coprocessor CP6" "Disabled,Enabled" bitfld.long 0x00 5. " CP5 ,Enables Non-secure access to coprocessor CP5" "Disabled,Enabled" bitfld.long 0x00 4. " CP4 ,Enables Non-secure access to coprocessor CP4" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " CP3 ,Enables Non-secure access to coprocessor CP3" "Disabled,Enabled" bitfld.long 0x00 2. " CP2 ,Enables Non-secure access to coprocessor CP2" "Disabled,Enabled" bitfld.long 0x00 1. " CP1 ,Enables Non-secure access to coprocessor CP1" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " CP0 ,Enables Non-secure access to coprocessor CP0" "Disabled,Enabled" else hgroup.long 0xD8C++0x03 hide.long 0x00 "NSACR,Non-Secure Access Control Register (not accessible)" endif wgroup.long 0xF00++0x03 line.long 0x00 "STIR,Software Triggered Interrupt Register" hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be pended" tree "Memory System" width 10. rgroup.long 0xD78++0x03 line.long 0x00 "CLIDR,Cache Level ID Register" bitfld.long 0x00 30.--31. " ICB ,Inner cache boundary" "Not disclosed,L1 cache highest,L2 cache highest,L3 cache highest" bitfld.long 0x00 27.--29. " LOU ,LOUU" "Level 1,Level 2,?..." bitfld.long 0x00 24.--26. " LOC ,Level of Coherency" "Level 1,Level 2,?..." textline " " bitfld.long 0x00 18.--20. " CL7 ,Cache type field level 7" "No cache,Instr. only,Data only,Data and Instr.,Unified cache,?..." bitfld.long 0x00 15.--17. " CL6 ,Cache type field level 6" "No cache,?..." bitfld.long 0x00 12.--14. " CL5 ,Cache type field level 5" "No cache,?..." textline " " bitfld.long 0x00 9.--11. " CL4 ,Cache type field level 4" "No cache,?..." bitfld.long 0x00 6.--8. " CL3 ,Cache type field level 3" "No cache,?..." bitfld.long 0x00 3.--5. " CL2 ,Cache type field level 2" "No cache,?..." textline " " bitfld.long 0x00 0.--2. " CL1 ,Cache type field level 1" "No cache,Instr. only,Data only,Data and Instr.,?..." if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD7C)&0xE0000000)==0x80000000) rgroup.long 0xD7C++0x03 line.long 0x00 "CTR,Cache Type Register" bitfld.long 0x00 29.--31. " FORMAT ,Indicates the implemented CTR format" "No Cache,,,,Cache,?..." bitfld.long 0x00 24.--27. " CWG ,Cache Write-back Granule" "0,1,2,3,4,5,6,7,8,9,?..." bitfld.long 0x00 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,?..." textline " " bitfld.long 0x00 16.--19. " DMINLINE ,Log 2 of the number of words in the smallest cache line of all the data caches and unified caches that are controlled by the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " IMINLINE ,Log 2 of the number of words in the smallest cache line of all the instruction caches that are controlled by the processor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else rgroup.long 0xD7C++0x03 line.long 0x00 "CTR,Cache Type Register" bitfld.long 0x00 29.--31. " FORMAT ,Indicates the implemented CTR format" "No Cache,,,,Cache,?..." endif rgroup.long 0xD80++0x03 line.long 0x00 "CCSIDR,Cache Size ID Register" bitfld.long 0x00 31. " WT ,Indicates support available for Write-Through" "Not supported,Supported" bitfld.long 0x00 30. " WB ,Indicates support available for Write-Back" "Not supported,Supported" bitfld.long 0x00 29. " RA ,Indicates support available for read allocation" "Not supported,Supported" textline " " bitfld.long 0x00 28. " WA ,Indicates support available for write allocation" "Not supported,Supported" hexmask.long.word 0x00 13.--27. 1. " NUMSETS ,Indicates the number of sets as (number of sets) - 1" hexmask.long.word 0x00 3.--12. 1. " ASSOCIATIVITY ,Indicates the number of ways as (number of ways) - 1" textline " " bitfld.long 0x00 0.--2. " LINESIZE ,Indicates the number of words in each cache line" "4,8,16,32,64,128,256,512" group.long 0xD84++0x03 line.long 0x00 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. " LEVEL ,Identifies which cache level to select" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,?..." bitfld.long 0x00 0. " IND ,Identifies instruction or data cache to use" "Data/Unified,Instruction" wgroup.long 0xF50++0x03 line.long 0x00 "ICIALLU,I-Cache Invalidate All to PoU" wgroup.long 0xF58++0x23 line.long 0x00 "ICIMVAU,I-Cache Invalidate by MVA to PoU" line.long 0x04 "DCIMVAC,D-Cache Invalidate by MVA to PoC" line.long 0x08 "DCISW,D-Cache Invalidate by Set-Way" hexmask.long 0x08 4.--31. 1. " SETWAY ,Defines number of the way to operate on and number of the set to operate on" bitfld.long 0x08 1.--3. " LEVEL ,Cache level to operate on, minus" "L1,L2,L3,L4,L5,L6,L7,L8" line.long 0x0C "DCCMVAU,D-Cache Clean by MVA to PoU" line.long 0x10 "DCCMVAC,D-Cache Clean by MVA to PoC" line.long 0x14 "DCCSW,D-Cache Clean by Set-Way" hexmask.long 0x14 4.--31. 1. " SETWAY ,Defines number of the way to operate on and number of the set to operate on" bitfld.long 0x14 1.--3. " LEVEL ,Cache level to operate on, minus" "L1,L2,L3,L4,L5,L6,L7,L8" line.long 0x18 "DCCIMVAC,D-Cache Clean and Invalidate by MVA to PoC" line.long 0x1C "DCCISW,D-Cache Clean and Invalidate by Set-Way" hexmask.long 0x1C 4.--31. 1. " SETWAY ,Defines number of the way to operate on and number of the set to operate on" bitfld.long 0x1C 1.--3. " LEVEL ,Cache level to operate on, minus" "L1,L2,L3,L4,L5,L6,L7,L8" line.long 0x20 "BPIALL,Branch Predictor Invalidate All" tree.end tree "Feature Registers" width 10. rgroup.long 0xD40++0x0B line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 4.--7. " STATE1 ,T32 instruction set support" ",,,Supported,?..." bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..." line.long 0x04 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..." bitfld.long 0x04 4.--7. " SECURITY ,Security support" "Not implemented,Implemented,?..." line.long 0x08 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x08 20.--23. " MPROFDBG ,M-profile debug. Indicates the supported M-profile debug architecture" "Not supported,ARMv8-M Debug architecture,?..." rgroup.long 0xD4C++0x03 line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" rgroup.long 0xD50++0x03 line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TCM ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "1 level,2 levels,?..." textline " " bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,HW coherency,,,,,,,,,,,,,,Ignored" bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,,PMSAv8,?..." rgroup.long 0xD54++0x03 line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1" rgroup.long 0xD58++0x03 line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..." rgroup.long 0xD5C++0x03 line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3" bitfld.long 0x00 8.--11. " BPMAINT ,Indicates the supported branch predictor maintenance" "Not supported,Supported,?..." bitfld.long 0x00 4.--7. " CMAINTSW ,Indicates the supported cache maintenance operations by set/way" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " CMAINTVA ,Indicates the supported cache maintenance operations by virtual-address" "Not supported,Supported,?..." rgroup.long 0xD60++0x03 line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0" bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..." bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..." bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..." bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..." bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..." rgroup.long 0xD64++0x03 line.long 0x00 "ID_ISAR1,Instruction Set Attributes Register 1" bitfld.long 0x00 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..." bitfld.long 0x00 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..." bitfld.long 0x00 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..." textline " " bitfld.long 0x00 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Basic,Extended,?..." rgroup.long 0xD68++0x03 line.long 0x00 "ID_ISAR2,Instruction Set Attributes Register 2" bitfld.long 0x00 28.--31. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..." bitfld.long 0x00 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..." bitfld.long 0x00 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,SMULL/SMLAL,,SMULL/SMLAL/DSP,?..." textline " " bitfld.long 0x00 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MUL,MUL/MLA/MLS,?..." bitfld.long 0x00 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..." bitfld.long 0x00 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..." textline " " bitfld.long 0x00 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,,Load-acquire/Store-release/Exclusive,?..." rgroup.long 0xD6C++0x03 line.long 0x00 "ID_ISAR3,Instruction Set Attributes Register 3" bitfld.long 0x00 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..." textline " " bitfld.long 0x00 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..." bitfld.long 0x00 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Extended,?..." textline " " bitfld.long 0x00 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB/Q-bit,?..." rgroup.long 0xD70++0x03 line.long 0x00 "ID_ISAR4,Instruction Set Attributes Register 4" bitfld.long 0x00 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,CPS/MRS/MSR,?..." bitfld.long 0x00 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" ",,,Supported,?..." bitfld.long 0x00 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,,,DMB/DSB/ISB,?..." textline " " bitfld.long 0x00 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..." bitfld.long 0x00 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,,,Load/store,?..." bitfld.long 0x00 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,?..." tree.end tree "CoreSight Identification Registers" base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 11. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xFBC))&0x100000)==0x100000) rgroup.long 0xFBC++0x03 line.long 0x00 "DDEVARCH,SCS CoreSight Device Architecture Register" hexmask.long.word 0x00 21.--31. 1. " ARCHITECT ,Component architect" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" bitfld.long 0x00 16.--19. " REVISION ,Architecture revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " ARCHVER ,Architecture version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " ARCHPART ,Architecture part" else rgroup.long 0xFBC++0x03 line.long 0x00 "DDEVARCH,SCS CoreSight Device Architecture Register" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" endif rgroup.long 0xFE0++0x0F line.long 0x00 "DPIDR0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "DPIDR1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "DPIDR2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "DPIDR3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "DCIDR0,Component ID0 (Preamble)" hexmask.long.byte 0x00 0.--7. 1. " PRMBL_0 ,CoreSight component identification preamble" line.long 0x04 "DCIDR1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " PRMBL_1 ,CoreSight component class" line.long 0x08 "DCIDR2,Component ID2" hexmask.long.byte 0x08 0.--7. 1. " PRMBL_2 ,CoreSight component identification preamble" line.long 0x0c "DCIDR3,Component ID3" hexmask.long.byte 0x0C 0.--7. 1. " PRMBL_3 ,CoreSight component identification preamble" tree.end width 0xB else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Memory Protection Unit (MPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 15. rgroup.long 0xD90++0x03 line.long 0x00 "MPU_TYPE,MPU Type Register" bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..." bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,?..." group.long 0xD94++0x03 line.long 0x00 "MPU_CTRL,MPU Control Register" bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled" bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled" bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled" group.long 0xD98++0x03 line.long 0x00 "MPU_RNR,MPU Region Number Register" hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR" tree.close "MPU regions" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0 group.long 0xD9C++0x03 "Region 0" saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RLAR0,MPU Region Attribute and Size Register 0" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 0 (not implemented)" saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RLAR0,MPU Region Attribute and Size Register 0" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1 group.long 0xD9C++0x03 "Region 1" saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RLAR1,MPU Region Attribute and Size Register 1" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 1 (not implemented)" saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RLAR1,MPU Region Attribute and Size Register 1" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2 group.long 0xD9C++0x03 "Region 2" saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RLAR2,MPU Region Attribute and Size Register 2" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 2 (not implemented)" saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RLAR2,MPU Region Attribute and Size Register 2" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3 group.long 0xD9C++0x03 "Region 3" saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RLAR3,MPU Region Attribute and Size Register 3" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 3 (not implemented)" saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RLAR3,MPU Region Attribute and Size Register 3" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4 group.long 0xD9C++0x03 "Region 4" saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RLAR4,MPU Region Attribute and Size Register 4" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 4 (not implemented)" saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RLAR4,MPU Region Attribute and Size Register 4" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5 group.long 0xD9C++0x03 "Region 5" saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RLAR5,MPU Region Attribute and Size Register 5" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 5 (not implemented)" saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RLAR5,MPU Region Attribute and Size Register 5" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6 group.long 0xD9C++0x03 "Region 6" saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RLAR6,MPU Region Attribute and Size Register 6" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 6 (not implemented)" saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RLAR6,MPU Region Attribute and Size Register 6" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7 group.long 0xD9C++0x03 "Region 7" saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RLAR7,MPU Region Attribute and Size Register 7" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 7 (not implemented)" saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RLAR7,MPU Region Attribute and Size Register 7" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8 group.long 0xD9C++0x03 "Region 8" saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RLAR8,MPU Region Attribute and Size Register 8" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 8 (not implemented)" saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RLAR8,MPU Region Attribute and Size Register 8" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9 group.long 0xD9C++0x03 "Region 9" saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RLAR9,MPU Region Attribute and Size Register 9" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 9 (not implemented)" saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RLAR9,MPU Region Attribute and Size Register 9" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA group.long 0xD9C++0x03 "Region 10" saveout 0xD98 %l 0xA line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xA line.long 0x00 "MPU_RLAR10,MPU Region Attribute and Size Register 10" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 10 (not implemented)" saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RLAR10,MPU Region Attribute and Size Register 10" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB group.long 0xD9C++0x03 "Region 11" saveout 0xD98 %l 0xB line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xB line.long 0x00 "MPU_RLAR11,MPU Region Attribute and Size Register 11" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 11 (not implemented)" saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RLAR11,MPU Region Attribute and Size Register 11" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC group.long 0xD9C++0x03 "Region 12" saveout 0xD98 %l 0xC line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xC line.long 0x00 "MPU_RLAR12,MPU Region Attribute and Size Register 12" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 12 (not implemented)" saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RLAR12,MPU Region Attribute and Size Register 12" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD group.long 0xD9C++0x03 "Region 13" saveout 0xD98 %l 0xD line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xD line.long 0x00 "MPU_RLAR13,MPU Region Attribute and Size Register 13" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 13 (not implemented)" saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RLAR13,MPU Region Attribute and Size Register 13" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE group.long 0xD9C++0x03 "Region 14" saveout 0xD98 %l 0xE line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xE line.long 0x00 "MPU_RLAR14,MPU Region Attribute and Size Register 14" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 14 (not implemented)" saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RLAR14,MPU Region Attribute and Size Register 14" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF group.long 0xD9C++0x03 "Region 15" saveout 0xD98 %l 0xF line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" bitfld.long 0x00 3.--4. " SH ,Defines the shareability domain of this region for Normal memory" "Non-shareable,,Outer Shareable,Inner Shareable" bitfld.long 0x00 1.--2. " AP ,Defines the access permissions for this region" "R/W privileged,R/W any,RO privileged,RO any" textline " " bitfld.long 0x00 0. " XN ,Defines whether code can be executed from this region" "Execute,Not Execute" group.long 0xDA0++0x03 saveout 0xD98 %l 0xF line.long 0x00 "MPU_RLAR15,MPU Region Attribute and Size Register 15" hexmask.long 0x00 5.--31. 0x20 " LIMIT ,Contains bits [31:5] of the upper inclusive limit of the selected MPU memory region" bitfld.long 0x00 1.--3. " ATTRINDX ,Associates a set of attributes in the MPU_MAIR0 and MPU_MAIR1 fields" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 15 (not implemented)" saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" textline " " hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RLAR15,MPU Region Attribute and Size Register 15" endif tree.end newline group.long 0xDC0++0x07 line.long 0x00 "MPU_MAIR0,MPU Memory Attribute Indirection Register 0" bitfld.long 0x00 28.--31. " ATTR3H ,Attribute 3 High. Outer memory attributes for MPU regions with an AttrIndex of 3" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 24.--27. " ATTR3L ,Attribute 3 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 3 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x00 20.--23. " ATTR2H ,Attribute 2 High. Outer memory attributes for MPU regions with an AttrIndex of 2" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 16.--19. " ATTR2L ,Attribute 2 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 2 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x00 12.--15. " ATTR1H ,Attribute 1 High. Outer memory attributes for MPU regions with an AttrIndex of 1" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 8.--11. " ATTR1L ,Attribute 1 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 1 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x00 4.--7. " ATTR0H ,Attribute 0 High. Outer memory attributes for MPU regions with an AttrIndex of 0" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x00 0.--3. " ATTR0L ,Attribute 0 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 0 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" line.long 0x04 "MPU_MAIR1,MPU Memory Attribute Indirection Register 1" bitfld.long 0x04 28.--31. " ATTR7H ,Attribute 7 High. Outer memory attributes for MPU regions with an AttrIndex of 7" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 24.--27. " ATTR7L ,Attribute 7 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 7 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x04 20.--23. " ATTR6H ,Attribute 6 High. Outer memory attributes for MPU regions with an AttrIndex of 6" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 16.--19. " ATTR6L ,Attribute 6 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 6 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x04 12.--15. " ATTR5H ,Attribute 5 High. Outer memory attributes for MPU regions with an AttrIndex of 5" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 8.--11. " ATTR5L ,Attribute 5 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 5 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" newline bitfld.long 0x04 4.--7. " ATTR4H ,Attribute 4 High. Outer memory attributes for MPU regions with an AttrIndex of 4" "Device memory,Normal memory/Write-through transient/W-allocate,Normal memory/Write-through transient/R-allocate,Normal memory/Write-through transient/RW-allocate,Normal memory/Non-cacheable,Normal memory/Write-back transient/W-allocate,Normal memory/Write-back transient/R-allocate,Normal memory/Write-back transient/RW-allocate,Normal memory/Write-through non-transient,Normal memory/Write-through non-transient/W-allocate,Normal memory/Write-through non-transient/R-allocate,Normal memory/Write-through non-transient/RW-allocate,Normal memory/Write-back non-transient,Normal memory/Write-back non-transient/W-allocate,Normal memory/Write-back non-transient/R-allocate,Normal memory/Write-back non-transient/RW-allocate" bitfld.long 0x04 0.--3. " ATTR4L ,Attribute 4 Low. Device memory/Inner memory attributes for MPU regions with an AttrIndex of 4 [Device memory/Normal memory]" "Device-nGnRnE/Unpredictable,---/Write-through transient/W-allocate,---/Write-through transient/R-allocate,---/Write-through transient/RW-allocate,Device-nGnRE/Non-cacheable,---/Write-back transient/W-allocate,---/Write-back transient/R-allocate,---/Write-back transient/RW-allocate,Device-nGRE/Write-through non-transient,---/Write-through non-transient/W-allocate,---/Write-through non-transient/R-allocate,---/Write-through non-transient/RW-allocate,Device-GRE/Write-back non-transient,---/Write-back non-transient/W-allocate,---/Write-back non-transient/R-allocate,---/Write-back non-transient/RW-allocate" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Security Attribution Unit (SAU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 15. group.long 0xDD0++0x03 line.long 0x00 "SAU_CTRL,SAU Control Register" bitfld.long 0x00 1. " ALLNS ,When SAU_CTRL.ENABLE is 0 this bit controls if the memory is marked as Non-secure or Secure" "Secure,Non-Secure" bitfld.long 0x00 0. " ENABLE ,Enables the SAU" "Disabled,Enabled" rgroup.long 0xDD4++0x03 line.long 0x00 "SAU_TYPE,SAU Type Register" bitfld.long 0x00 0.--7. " SREGION ,The number of implemented SAU regions" "0,1,2,3,4,5,6,7,8,?..." group.long 0xDD8++0x03 line.long 0x00 "SAU_RNR,SAU Region Number Register" hexmask.long.byte 0x00 0.--7. 1. " SAU_RNR ,Indicates the SAU region accessed by SAU_RBAR and SAU_RLAR" tree.close "SAU regions" if PER.ADDRESS.isSECUREEX(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDD0) if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x0 group.long 0xDDC++0x03 "Region 0" saveout 0xDD8 %l 0x0 line.long 0x00 "SAU_RBAR0,SAU Region Base Address Register 0" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x0 line.long 0x00 "SAU_RLAR0,SAU Region Limit Address Register 0" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 0 (not implemented)" saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RBAR0,SAU Region Base Address Register 0" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RLAR0,SAU Region Limit Address Register 0" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x1 group.long 0xDDC++0x03 "Region 1" saveout 0xDD8 %l 0x1 line.long 0x00 "SAU_RBAR1,SAU Region Base Address Register 1" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x1 line.long 0x00 "SAU_RLAR1,SAU Region Limit Address Register 1" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 1 (not implemented)" saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RBAR1,SAU Region Base Address Register 1" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RLAR1,SAU Region Limit Address Register 1" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x2 group.long 0xDDC++0x03 "Region 2" saveout 0xDD8 %l 0x2 line.long 0x00 "SAU_RBAR2,SAU Region Base Address Register 2" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x2 line.long 0x00 "SAU_RLAR2,SAU Region Limit Address Register 2" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 2 (not implemented)" saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RBAR2,SAU Region Base Address Register 2" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RLAR2,SAU Region Limit Address Register 2" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x3 group.long 0xDDC++0x03 "Region 3" saveout 0xDD8 %l 0x3 line.long 0x00 "SAU_RBAR3,SAU Region Base Address Register 3" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x3 line.long 0x00 "SAU_RLAR3,SAU Region Limit Address Register 3" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 3 (not implemented)" saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RBAR3,SAU Region Base Address Register 3" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RLAR3,SAU Region Limit Address Register 3" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x4 group.long 0xDDC++0x03 "Region 4" saveout 0xDD8 %l 0x4 line.long 0x00 "SAU_RBAR4,SAU Region Base Address Register 4" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x4 line.long 0x00 "SAU_RLAR4,SAU Region Limit Address Register 4" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 4 (not implemented)" saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RBAR4,SAU Region Base Address Register 4" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RLAR4,SAU Region Limit Address Register 4" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x5 group.long 0xDDC++0x03 "Region 5" saveout 0xDD8 %l 0x5 line.long 0x00 "SAU_RBAR5,SAU Region Base Address Register 5" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x5 line.long 0x00 "SAU_RLAR5,SAU Region Limit Address Register 5" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 5 (not implemented)" saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RBAR5,SAU Region Base Address Register 5" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RLAR5,SAU Region Limit Address Register 5" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x6 group.long 0xDDC++0x03 "Region 6" saveout 0xDD8 %l 0x6 line.long 0x00 "SAU_RBAR6,SAU Region Base Address Register 6" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x6 line.long 0x00 "SAU_RLAR6,SAU Region Limit Address Register 6" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 6 (not implemented)" saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RBAR6,SAU Region Base Address Register 6" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RLAR6,SAU Region Limit Address Register 6" endif if ((per.l(COMPonent.BASE("COREDEBUG",-1)+0xDD4)&0xFF))>0x7 group.long 0xDDC++0x03 "Region 7" saveout 0xDD8 %l 0x7 line.long 0x00 "SAU_RBAR7,SAU Region Base Address Register 7" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDE0++0x03 saveout 0xDD8 %l 0x7 line.long 0x00 "SAU_RLAR7,SAU Region Limit Address Register 7" hexmask.long 0x00 5.--31. 0x20 " LADDR ,Holds bits [31:5] of the limit address for the selected SAU region" bitfld.long 0x00 1. " NSC ,Controls whether Non-secure state is permitted to execute an SG instruction from this region" "Not permitted,Permitted" bitfld.long 0x00 0. " ENABLE ,SAU region enable" "Disabled,Enabled" else hgroup.long 0xDDC++0x03 "Region 7 (not implemented)" saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RBAR7,SAU Region Base Address Register 7" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RLAR7,SAU Region Limit Address Register 7" endif else hgroup.long 0xDDC++0x03 "Region 0 (not accessible)" saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RBAR0,SAU Region Base Address Register 0" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x0 hide.long 0x00 "SAU_RLAR0,SAU Region Limit Address Register 0" hgroup.long 0xDDC++0x03 "Region 1 (not accessible)" saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RBAR1,SAU Region Base Address Register 1" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x1 hide.long 0x00 "SAU_RLAR1,SAU Region Limit Address Register 1" hgroup.long 0xDDC++0x03 "Region 2 (not accessible)" saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RBAR2,SAU Region Base Address Register 2" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x2 hide.long 0x00 "SAU_RLAR2,SAU Region Limit Address Register 2" hgroup.long 0xDDC++0x03 "Region 3 (not accessible)" saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RBAR3,SAU Region Base Address Register 3" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x3 hide.long 0x00 "SAU_RLAR3,SAU Region Limit Address Register 3" hgroup.long 0xDDC++0x03 "Region 4 (not accessible)" saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RBAR4,SAU Region Base Address Register 4" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x4 hide.long 0x00 "SAU_RLAR4,SAU Region Limit Address Register 4" hgroup.long 0xDDC++0x03 "Region 5 (not accessible)" saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RBAR5,SAU Region Base Address Register 5" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x5 hide.long 0x00 "SAU_RLAR5,SAU Region Limit Address Register 5" hgroup.long 0xDDC++0x03 "Region 6 (not accessible)" saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RBAR6,SAU Region Base Address Register 6" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x6 hide.long 0x00 "SAU_RLAR6,SAU Region Limit Address Register 6" hgroup.long 0xDDC++0x03 "Region 7 (not accessible)" saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RBAR7,SAU Region Base Address Register 7" hgroup.long 0xDE0++0x03 saveout 0xDD8 %l 0x7 hide.long 0x00 "SAU_RLAR7,SAU Region Limit Address Register 7" endif tree.end group.long 0xDE4++0x03 line.long 0x00 "SFSR,Secure Fault Status Register" bitfld.long 0x00 7. " LSERR ,Lazy state error flag" "Not occurred,Occurred" bitfld.long 0x00 6. " SFARVALID ,Secure fault address valid" "Not valid,Valid" bitfld.long 0x00 5. " LSPERR ,Lazy state preservation error flag" "Not occurred,Occurred" textline " " bitfld.long 0x00 4. " INVTRAN ,Invalid transition flag" "Not occurred,Occurred" bitfld.long 0x00 3. " AUVIOL ,Attribution unit violation flag" "Not occurred,Occurred" bitfld.long 0x00 2. " INVER ,Invalid exception return flag" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " INVIS ,Invalid integrity signature flag" "Not occurred,Occurred" bitfld.long 0x00 0. " INVEP ,Invalid entry point" "Not occurred,Occurred" group.long 0xDE8++0x03 line.long 0x00 "SFAR,Secure Fault Address Register" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Nested Vectored Interrupt Controller (NVIC)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 6. group.long 0x04++0x03 line.long 0x00 "ICTR,Interrupt Controller Type Register" bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,0-64,0-96,0-128,0-160,0-192,0-224,0-255,0-287,0-319,0-351,0-383,0-415,0-447,0-479,0-511" width 24. tree "Interrupt Enable Registers" group.long 0x100++0x03 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x104++0x03 line.long 0x00 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x104++0x03 hide.long 0x00 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x108++0x03 line.long 0x00 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x108++0x03 hide.long 0x00 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x10C++0x03 line.long 0x00 "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x10C++0x03 hide.long 0x00 "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x110++0x03 line.long 0x00 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x110++0x03 hide.long 0x00 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x114++0x03 line.long 0x00 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x114++0x03 hide.long 0x00 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x118++0x03 line.long 0x00 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x118++0x03 hide.long 0x00 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x11C++0x03 line.long 0x00 "IRQ224_255_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA255 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA254 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA253 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA252 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA251 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA250 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA249 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA248 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA247 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA246 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA245 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA244 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA243 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA242 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA241 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA240 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x11C++0x03 hide.long 0x00 "IRQ224_255_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x120++0x03 line.long 0x00 "IRQ256_287_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA287 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA286 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA285 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA284 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA283 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA282 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA281 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA280 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA279 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA278 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA277 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA276 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA275 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA274 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA273 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA272 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA271 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA270 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA269 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA268 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA267 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA266 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA265 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA264 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA263 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA262 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA261 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA260 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA259 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA258 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA257 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA256 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x120++0x03 hide.long 0x00 "IRQ256_287_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x124++0x03 line.long 0x00 "IRQ288_319_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA319 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA318 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA317 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA316 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA315 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA314 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA313 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA312 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA311 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA310 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA309 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA308 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA307 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA306 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA305 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA304 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA303 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA302 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA301 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA300 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA299 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA298 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA297 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA296 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA295 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA294 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA293 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA292 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA291 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA290 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA289 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA288 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x124++0x03 hide.long 0x00 "IRQ288_319_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x128++0x03 line.long 0x00 "IRQ320_351_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA351 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA350 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA349 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA348 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA347 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA346 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA345 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA344 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA343 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA342 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA341 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA340 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA339 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA338 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA337 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA336 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA335 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA334 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA333 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA332 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA331 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA330 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA329 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA328 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA327 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA326 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA325 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA324 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA323 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA322 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA321 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA320 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x128++0x03 hide.long 0x00 "IRQ320_351_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x12C++0x03 line.long 0x00 "IRQ352_383_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA383 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA382 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA381 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA380 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA379 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA378 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA377 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA376 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA375 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA374 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA373 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA372 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA371 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA370 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA369 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA368 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA367 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA366 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA365 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA364 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA363 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA362 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA361 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA360 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA359 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA358 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA357 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA356 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA355 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA354 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA353 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA352 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x12C++0x03 hide.long 0x00 "IRQ352_383_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x130++0x03 line.long 0x00 "IRQ384_415_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA415 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA414 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA413 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA412 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA411 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA410 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA409 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA408 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA407 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA406 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA405 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA404 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA403 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA402 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA401 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA400 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA399 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA398 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA397 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA396 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA395 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA394 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA393 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA392 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA391 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA390 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA389 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA388 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA387 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA386 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA385 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA384 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x130++0x03 hide.long 0x00 "IRQ384_415_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x134++0x03 line.long 0x00 "IRQ416_447_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA447 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA446 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA445 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA444 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA443 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA442 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA441 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA440 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA439 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA438 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA437 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA436 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA435 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA434 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA433 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA432 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA431 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA430 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA429 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA428 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA427 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA426 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA425 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA424 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA423 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA422 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA421 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA420 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA419 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA418 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA417 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA416 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x134++0x03 hide.long 0x00 "IRQ416_447_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x138++0x03 line.long 0x00 "IRQ448_479_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA479 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA478 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA477 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA476 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA475 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA474 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA473 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA472 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA471 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA470 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA469 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA468 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA467 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA466 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA465 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA464 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA463 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA462 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA461 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA460 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA459 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA458 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA457 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA456 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA455 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA454 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA453 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA452 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA451 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA450 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA449 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA448 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x138++0x03 hide.long 0x00 "IRQ448_479_EN_SET/CLR,Interrupt Enable Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0F) group.long 0x13C++0x03 line.long 0x00 "IRQ480_511_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA511 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA510 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA509 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA508 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA507 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA506 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA505 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA504 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA503 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA502 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA501 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA500 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA499 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA498 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA497 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA496 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA495 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA494 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA493 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA492 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA491 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA490 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA489 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA488 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA487 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA486 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA485 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA484 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA483 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA482 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA481 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA480 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x13C++0x03 hide.long 0x00 "IRQ480_511_EN_SET/CLR,Interrupt Enable Register" endif tree.end width 24. tree "Interrupt Pending Registers" group.long 0x200++0x03 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x204++0x03 line.long 0x00 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x204++0x03 hide.long 0x00 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x208++0x03 line.long 0x00 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x208++0x03 hide.long 0x00 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x20C++0x03 line.long 0x00 "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x20C++0x03 hide.long 0x00 "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x210++0x03 line.long 0x00 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x210++0x03 hide.long 0x00 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x214++0x03 line.long 0x00 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x214++0x03 hide.long 0x00 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x218++0x03 line.long 0x00 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x218++0x03 hide.long 0x00 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x21C++0x03 line.long 0x00 "IRQ224_255_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN255 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN254 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN253 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN252 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN251 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN250 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN249 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN248 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN247 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN246 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN245 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN244 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN243 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN242 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN241 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN240 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x21C++0x03 hide.long 0x00 "IRQ224_255_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x220++0x03 line.long 0x00 "IRQ256_287_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN287 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN286 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN285 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN284 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN283 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN282 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN281 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN280 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN279 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN278 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN277 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN276 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN275 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN274 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN273 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN272 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN271 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN270 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN269 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN268 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN267 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN266 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN265 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN264 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN263 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN262 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN261 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN260 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN259 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN258 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN257 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN256 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x220++0x03 hide.long 0x00 "IRQ256_287_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x224++0x03 line.long 0x00 "IRQ288_319_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN319 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN318 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN317 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN316 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN315 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN314 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN313 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN312 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN311 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN310 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN309 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN308 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN307 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN306 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN305 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN304 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN303 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN302 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN301 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN300 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN299 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN298 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN297 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN296 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN295 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN294 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN293 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN292 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN291 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN290 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN289 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN288 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x224++0x03 hide.long 0x00 "IRQ288_319_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x228++0x03 line.long 0x00 "IRQ320_351_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN351 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN350 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN349 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN348 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN347 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN346 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN345 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN344 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN343 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN342 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN341 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN340 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN339 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN338 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN337 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN336 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN335 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN334 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN333 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN332 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN331 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN330 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN329 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN328 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN327 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN326 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN325 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN324 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN323 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN322 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN321 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN320 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x228++0x03 hide.long 0x00 "IRQ320_351_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x22C++0x03 line.long 0x00 "IRQ352_383_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN383 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN382 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN381 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN380 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN379 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN378 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN377 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN376 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN375 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN374 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN373 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN372 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN371 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN370 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN369 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN368 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN367 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN366 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN365 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN364 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN363 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN362 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN361 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN360 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN359 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN358 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN357 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN356 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN355 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN354 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN353 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN352 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x22C++0x03 hide.long 0x00 "IRQ352_383_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x230++0x03 line.long 0x00 "IRQ384_415_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN415 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN414 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN413 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN412 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN411 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN410 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN409 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN408 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN407 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN406 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN405 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN404 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN403 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN402 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN401 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN400 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN399 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN398 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN397 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN396 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN395 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN394 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN393 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN392 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN391 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN390 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN389 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN388 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN387 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN386 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN385 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN384 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x230++0x03 hide.long 0x00 "IRQ384_415_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x234++0x03 line.long 0x00 "IRQ416_447_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN447 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN446 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN445 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN444 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN443 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN442 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN441 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN440 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN439 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN438 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN437 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN436 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN435 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN434 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN433 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN432 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN431 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN430 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN429 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN428 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN427 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN426 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN425 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN424 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN423 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN422 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN421 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN420 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN419 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN418 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN417 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN416 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x234++0x03 hide.long 0x00 "IRQ416_447_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x238++0x03 line.long 0x00 "IRQ448_479_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN479 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN478 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN477 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN476 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN475 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN474 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN473 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN472 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN471 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN470 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN469 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN468 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN467 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN466 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN465 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN464 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN463 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN462 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN461 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN460 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN459 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN458 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN457 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN456 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN455 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN454 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN453 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN452 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN451 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN450 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN449 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN448 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x238++0x03 hide.long 0x00 "IRQ448_479_PEN_SET/CLR,Interrupt Pending Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0F) group.long 0x23C++0x03 line.long 0x00 "IRQ480_511_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN511 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN510 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN509 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN508 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN507 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN506 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN505 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN504 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN503 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN502 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN501 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN500 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN499 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN498 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN497 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN496 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN495 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN494 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN493 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN492 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN491 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN490 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN489 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN488 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN487 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN486 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN485 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN484 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN483 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN482 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN481 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN480 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x23C++0x03 hide.long 0x00 "IRQ480_511_PEN_SET/CLR,Interrupt Pending Register" endif tree.end width 11. tree "Interrupt Active Bit Registers" rgroup.long 0x300++0x03 line.long 0x00 "ACTIVE0,Active Bit Register 0" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) rgroup.long 0x304++0x03 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x304++0x03 hide.long 0x00 "ACTIVE1,Active Bit Register 1" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) rgroup.long 0x308++0x03 line.long 0x00 "ACTIVE2,Active Bit Register 2" bitfld.long 0x00 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x308++0x03 hide.long 0x00 "ACTIVE2,Active Bit Register 2" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) rgroup.long 0x30C++0x03 line.long 0x00 "ACTIVE3,Active Bit Register 3" bitfld.long 0x00 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x30C++0x03 hide.long 0x00 "ACTIVE3,Active Bit Register 3" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) rgroup.long 0x310++0x03 line.long 0x00 "ACTIVE4,Active Bit Register 4" bitfld.long 0x00 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x310++0x03 hide.long 0x00 "ACTIVE4,Active Bit Register 4" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) rgroup.long 0x314++0x03 line.long 0x00 "ACTIVE5,Active Bit Register 5" bitfld.long 0x00 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x314++0x03 hide.long 0x00 "ACTIVE5,Active Bit Register 5" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) rgroup.long 0x318++0x03 line.long 0x00 "ACTIVE6,Active Bit Register 6" bitfld.long 0x00 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x318++0x03 hide.long 0x00 "ACTIVE6,Active Bit Register 6" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) rgroup.long 0x31C++0x03 line.long 0x00 "ACTIVE7,Active Bit Register 7" bitfld.long 0x00 31. " ACTIVE255 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE254 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE253 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE252 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE251 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE250 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE249 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE248 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE247 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE246 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE245 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE244 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE243 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE242 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE241 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE240 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x31C++0x03 hide.long 0x00 "ACTIVE7,Active Bit Register 7" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) rgroup.long 0x320++0x03 line.long 0x00 "ACTIVE8,Active Bit Register 8" bitfld.long 0x00 31. " ACTIVE287 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE286 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE285 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE284 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE283 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE282 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE281 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE280 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE279 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE278 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE277 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE276 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE275 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE274 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE273 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE272 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE271 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE270 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE269 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE268 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE267 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE266 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE265 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE264 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE263 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE262 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE261 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE260 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE259 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE258 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE257 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE256 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x320++0x03 hide.long 0x00 "ACTIVE8,Active Bit Register 8" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) rgroup.long 0x324++0x03 line.long 0x00 "ACTIVE9,Active Bit Register 9" bitfld.long 0x00 31. " ACTIVE319 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE318 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE317 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE316 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE315 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE314 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE313 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE312 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE311 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE310 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE309 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE308 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE307 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE306 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE305 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE304 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE303 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE302 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE301 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE300 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE299 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE298 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE297 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE296 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE295 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE294 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE293 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE292 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE291 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE290 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE289 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE288 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x324++0x03 hide.long 0x00 "ACTIVE9,Active Bit Register 9" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) rgroup.long 0x328++0x03 line.long 0x00 "ACTIVE10,Active Bit Register 10" bitfld.long 0x00 31. " ACTIVE351 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE350 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE349 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE348 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE347 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE346 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE345 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE344 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE343 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE342 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE341 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE340 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE339 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE338 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE337 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE336 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE335 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE334 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE333 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE332 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE331 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE330 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE329 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE328 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE327 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE326 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE325 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE324 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE323 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE322 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE321 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE320 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x328++0x03 hide.long 0x00 "ACTIVE10,Active Bit Register 10" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) rgroup.long 0x32C++0x03 line.long 0x00 "ACTIVE11,Active Bit Register 11" bitfld.long 0x00 31. " ACTIVE383 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE382 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE381 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE380 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE379 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE378 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE377 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE376 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE375 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE374 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE373 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE372 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE371 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE370 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE369 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE368 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE367 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE366 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE365 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE364 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE363 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE362 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE361 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE360 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE359 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE358 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE357 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE356 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE355 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE354 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE353 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE352 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x32C++0x03 hide.long 0x00 "ACTIVE11,Active Bit Register 11" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) rgroup.long 0x330++0x03 line.long 0x00 "ACTIVE12,Active Bit Register 12" bitfld.long 0x00 31. " ACTIVE415 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE414 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE413 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE412 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE411 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE410 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE409 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE408 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE407 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE406 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE405 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE404 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE403 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE402 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE401 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE400 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE399 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE398 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE397 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE396 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE395 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE394 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE393 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE392 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE391 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE390 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE389 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE388 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE387 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE386 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE385 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE384 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x330++0x03 hide.long 0x00 "ACTIVE12,Active Bit Register 12" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) rgroup.long 0x334++0x03 line.long 0x00 "ACTIVE13,Active Bit Register 13" bitfld.long 0x00 31. " ACTIVE447 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE446 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE445 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE444 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE443 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE442 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE441 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE440 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE439 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE438 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE437 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE436 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE435 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE434 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE433 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE432 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE431 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE430 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE429 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE428 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE427 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE426 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE425 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE424 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE423 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE422 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE421 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE420 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE419 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE418 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE417 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE416 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x334++0x03 hide.long 0x00 "ACTIVE13,Active Bit Register 13" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) rgroup.long 0x338++0x03 line.long 0x00 "ACTIVE14,Active Bit Register 14" bitfld.long 0x00 31. " ACTIVE479 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE478 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE477 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE476 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE475 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE474 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE473 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE472 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE471 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE470 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE469 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE468 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE467 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE466 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE465 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE464 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE463 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE462 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE461 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE460 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE459 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE458 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE457 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE456 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE455 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE454 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE453 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE452 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE451 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE450 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE449 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE448 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x338++0x03 hide.long 0x00 "ACTIVE14,Active Bit Register 14" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0F) rgroup.long 0x33C++0x03 line.long 0x00 "ACTIVE15,Active Bit Register 15" bitfld.long 0x00 31. " ACTIVE511 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE510 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE509 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE508 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE507 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE506 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE505 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE504 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE503 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE502 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE501 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE500 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE499 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE498 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE497 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE496 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE495 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE494 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE493 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE492 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE491 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE490 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE489 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE488 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE487 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE486 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE485 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE484 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE483 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE482 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE481 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE480 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x33C++0x03 hide.long 0x00 "ACTIVE15,Active Bit Register 15" endif tree.end width 13. tree "Interrupt Target Non-Secure Registers" group.long 0x380++0x03 line.long 0x00 "NVIC_ITNS0,Interrupt Target Non-Secure Register 0" bitfld.long 0x00 31. " ITNS31 ,Interrupt Targets Non-secure 31" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS30 ,Interrupt Targets Non-secure 30" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS29 ,Interrupt Targets Non-secure 29" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS28 ,Interrupt Targets Non-secure 28" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS27 ,Interrupt Targets Non-secure 27" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS26 ,Interrupt Targets Non-secure 26" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS25 ,Interrupt Targets Non-secure 25" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS24 ,Interrupt Targets Non-secure 24" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS23 ,Interrupt Targets Non-secure 23" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS22 ,Interrupt Targets Non-secure 22" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS21 ,Interrupt Targets Non-secure 21" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS20 ,Interrupt Targets Non-secure 20" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS19 ,Interrupt Targets Non-secure 19" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS18 ,Interrupt Targets Non-secure 18" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS17 ,Interrupt Targets Non-secure 17" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS16 ,Interrupt Targets Non-secure 16" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS15 ,Interrupt Targets Non-secure 15" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS14 ,Interrupt Targets Non-secure 14" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS13 ,Interrupt Targets Non-secure 13" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS12 ,Interrupt Targets Non-secure 12" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS11 ,Interrupt Targets Non-secure 11" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS10 ,Interrupt Targets Non-secure 10" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS9 ,Interrupt Targets Non-secure 9" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS8 ,Interrupt Targets Non-secure 8" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS7 ,Interrupt Targets Non-secure 7" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS6 ,Interrupt Targets Non-secure 6" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS5 ,Interrupt Targets Non-secure 5" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS4 ,Interrupt Targets Non-secure 4" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS3 ,Interrupt Targets Non-secure 3" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS2 ,Interrupt Targets Non-secure 2" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS1 ,Interrupt Targets Non-secure 1" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS0 ,Interrupt Targets Non-secure 0" "Secure,Non-secure" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x384++0x03 line.long 0x00 "NVIC_ITNS1,Interrupt Target Non-Secure Register 1" bitfld.long 0x00 31. " ITNS63 ,Interrupt Targets Non-secure 63" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS62 ,Interrupt Targets Non-secure 62" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS61 ,Interrupt Targets Non-secure 61" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS60 ,Interrupt Targets Non-secure 60" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS59 ,Interrupt Targets Non-secure 59" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS58 ,Interrupt Targets Non-secure 58" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS57 ,Interrupt Targets Non-secure 57" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS56 ,Interrupt Targets Non-secure 56" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS55 ,Interrupt Targets Non-secure 55" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS54 ,Interrupt Targets Non-secure 54" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS53 ,Interrupt Targets Non-secure 53" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS52 ,Interrupt Targets Non-secure 52" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS51 ,Interrupt Targets Non-secure 51" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS50 ,Interrupt Targets Non-secure 50" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS49 ,Interrupt Targets Non-secure 49" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS48 ,Interrupt Targets Non-secure 48" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS47 ,Interrupt Targets Non-secure 47" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS46 ,Interrupt Targets Non-secure 46" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS45 ,Interrupt Targets Non-secure 45" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS44 ,Interrupt Targets Non-secure 44" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS43 ,Interrupt Targets Non-secure 43" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS42 ,Interrupt Targets Non-secure 42" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS41 ,Interrupt Targets Non-secure 41" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS40 ,Interrupt Targets Non-secure 40" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS39 ,Interrupt Targets Non-secure 39" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS38 ,Interrupt Targets Non-secure 38" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS37 ,Interrupt Targets Non-secure 37" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS36 ,Interrupt Targets Non-secure 36" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS35 ,Interrupt Targets Non-secure 35" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS34 ,Interrupt Targets Non-secure 34" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS33 ,Interrupt Targets Non-secure 33" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS32 ,Interrupt Targets Non-secure 32" "Secure,Non-secure" else hgroup.long 0x384++0x03 hide.long 0x00 "NVIC_ITNS1,Interrupt Target Non-Secure Register 1" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x388++0x03 line.long 0x00 "NVIC_ITNS2,Interrupt Target Non-Secure Register 2" bitfld.long 0x00 31. " ITNS95 ,Interrupt Targets Non-secure 95" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS94 ,Interrupt Targets Non-secure 94" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS93 ,Interrupt Targets Non-secure 93" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS92 ,Interrupt Targets Non-secure 92" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS91 ,Interrupt Targets Non-secure 91" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS90 ,Interrupt Targets Non-secure 90" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS89 ,Interrupt Targets Non-secure 89" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS88 ,Interrupt Targets Non-secure 88" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS87 ,Interrupt Targets Non-secure 87" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS86 ,Interrupt Targets Non-secure 86" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS85 ,Interrupt Targets Non-secure 85" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS84 ,Interrupt Targets Non-secure 84" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS83 ,Interrupt Targets Non-secure 83" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS82 ,Interrupt Targets Non-secure 82" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS81 ,Interrupt Targets Non-secure 81" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS80 ,Interrupt Targets Non-secure 80" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS79 ,Interrupt Targets Non-secure 79" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS78 ,Interrupt Targets Non-secure 78" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS77 ,Interrupt Targets Non-secure 77" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS76 ,Interrupt Targets Non-secure 76" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS75 ,Interrupt Targets Non-secure 75" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS74 ,Interrupt Targets Non-secure 74" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS73 ,Interrupt Targets Non-secure 73" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS72 ,Interrupt Targets Non-secure 72" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS71 ,Interrupt Targets Non-secure 71" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS70 ,Interrupt Targets Non-secure 70" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS69 ,Interrupt Targets Non-secure 69" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS68 ,Interrupt Targets Non-secure 68" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS67 ,Interrupt Targets Non-secure 67" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS66 ,Interrupt Targets Non-secure 66" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS65 ,Interrupt Targets Non-secure 65" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS64 ,Interrupt Targets Non-secure 64" "Secure,Non-secure" else hgroup.long 0x388++0x03 hide.long 0x00 "NVIC_ITNS2,Interrupt Target Non-Secure Register 2" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x38C++0x03 line.long 0x00 "NVIC_ITNS3,Interrupt Target Non-Secure Register 3" bitfld.long 0x00 31. " ITNS127 ,Interrupt Targets Non-secure 127" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS126 ,Interrupt Targets Non-secure 126" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS125 ,Interrupt Targets Non-secure 125" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS124 ,Interrupt Targets Non-secure 124" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS123 ,Interrupt Targets Non-secure 123" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS122 ,Interrupt Targets Non-secure 122" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS121 ,Interrupt Targets Non-secure 121" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS120 ,Interrupt Targets Non-secure 120" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS119 ,Interrupt Targets Non-secure 119" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS118 ,Interrupt Targets Non-secure 118" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS117 ,Interrupt Targets Non-secure 117" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS116 ,Interrupt Targets Non-secure 116" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS115 ,Interrupt Targets Non-secure 115" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS114 ,Interrupt Targets Non-secure 114" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS113 ,Interrupt Targets Non-secure 113" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS112 ,Interrupt Targets Non-secure 112" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS111 ,Interrupt Targets Non-secure 111" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS110 ,Interrupt Targets Non-secure 110" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS109 ,Interrupt Targets Non-secure 109" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS108 ,Interrupt Targets Non-secure 108" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS107 ,Interrupt Targets Non-secure 107" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS106 ,Interrupt Targets Non-secure 106" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS105 ,Interrupt Targets Non-secure 105" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS104 ,Interrupt Targets Non-secure 104" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS103 ,Interrupt Targets Non-secure 103" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS102 ,Interrupt Targets Non-secure 102" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS101 ,Interrupt Targets Non-secure 101" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS100 ,Interrupt Targets Non-secure 100" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS99 ,Interrupt Targets Non-secure 99" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS98 ,Interrupt Targets Non-secure 98" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS97 ,Interrupt Targets Non-secure 97" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS96 ,Interrupt Targets Non-secure 96" "Secure,Non-secure" else hgroup.long 0x38C++0x03 hide.long 0x00 "NVIC_ITNS3,Interrupt Target Non-Secure Register 3" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x390++0x03 line.long 0x00 "NVIC_ITNS4,Interrupt Target Non-Secure Register 4" bitfld.long 0x00 31. " ITNS159 ,Interrupt Targets Non-secure 159" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS158 ,Interrupt Targets Non-secure 158" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS157 ,Interrupt Targets Non-secure 157" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS156 ,Interrupt Targets Non-secure 156" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS155 ,Interrupt Targets Non-secure 155" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS154 ,Interrupt Targets Non-secure 154" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS153 ,Interrupt Targets Non-secure 153" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS152 ,Interrupt Targets Non-secure 152" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS151 ,Interrupt Targets Non-secure 151" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS150 ,Interrupt Targets Non-secure 150" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS149 ,Interrupt Targets Non-secure 149" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS148 ,Interrupt Targets Non-secure 148" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS147 ,Interrupt Targets Non-secure 147" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS146 ,Interrupt Targets Non-secure 146" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS145 ,Interrupt Targets Non-secure 145" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS144 ,Interrupt Targets Non-secure 144" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS143 ,Interrupt Targets Non-secure 143" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS142 ,Interrupt Targets Non-secure 142" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS141 ,Interrupt Targets Non-secure 141" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS140 ,Interrupt Targets Non-secure 140" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS139 ,Interrupt Targets Non-secure 139" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS138 ,Interrupt Targets Non-secure 138" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS137 ,Interrupt Targets Non-secure 137" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS136 ,Interrupt Targets Non-secure 136" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS135 ,Interrupt Targets Non-secure 135" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS134 ,Interrupt Targets Non-secure 134" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS133 ,Interrupt Targets Non-secure 133" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS132 ,Interrupt Targets Non-secure 132" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS131 ,Interrupt Targets Non-secure 131" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS130 ,Interrupt Targets Non-secure 130" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS129 ,Interrupt Targets Non-secure 129" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS128 ,Interrupt Targets Non-secure 128" "Secure,Non-secure" else hgroup.long 0x390++0x03 hide.long 0x00 "NVIC_ITNS4,Interrupt Target Non-Secure Register 4" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x394++0x03 line.long 0x00 "NVIC_ITNS5,Interrupt Target Non-Secure Register 5" bitfld.long 0x00 31. " ITNS191 ,Interrupt Targets Non-secure 191" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS190 ,Interrupt Targets Non-secure 190" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS189 ,Interrupt Targets Non-secure 189" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS188 ,Interrupt Targets Non-secure 188" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS187 ,Interrupt Targets Non-secure 187" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS186 ,Interrupt Targets Non-secure 186" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS185 ,Interrupt Targets Non-secure 185" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS184 ,Interrupt Targets Non-secure 184" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS183 ,Interrupt Targets Non-secure 183" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS182 ,Interrupt Targets Non-secure 182" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS181 ,Interrupt Targets Non-secure 181" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS180 ,Interrupt Targets Non-secure 180" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS179 ,Interrupt Targets Non-secure 179" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS178 ,Interrupt Targets Non-secure 178" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS177 ,Interrupt Targets Non-secure 177" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS176 ,Interrupt Targets Non-secure 176" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS175 ,Interrupt Targets Non-secure 175" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS174 ,Interrupt Targets Non-secure 174" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS173 ,Interrupt Targets Non-secure 173" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS172 ,Interrupt Targets Non-secure 172" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS171 ,Interrupt Targets Non-secure 171" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS170 ,Interrupt Targets Non-secure 170" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS169 ,Interrupt Targets Non-secure 169" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS168 ,Interrupt Targets Non-secure 168" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS167 ,Interrupt Targets Non-secure 167" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS166 ,Interrupt Targets Non-secure 166" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS165 ,Interrupt Targets Non-secure 165" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS164 ,Interrupt Targets Non-secure 164" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS163 ,Interrupt Targets Non-secure 163" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS162 ,Interrupt Targets Non-secure 162" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS161 ,Interrupt Targets Non-secure 161" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS160 ,Interrupt Targets Non-secure 160" "Secure,Non-secure" else hgroup.long 0x394++0x03 hide.long 0x00 "NVIC_ITNS5,Interrupt Target Non-Secure Register 5" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x398++0x03 line.long 0x00 "NVIC_ITNS6,Interrupt Target Non-Secure Register 6" bitfld.long 0x00 31. " ITNS223 ,Interrupt Targets Non-secure 223" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS222 ,Interrupt Targets Non-secure 222" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS221 ,Interrupt Targets Non-secure 221" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS220 ,Interrupt Targets Non-secure 220" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS219 ,Interrupt Targets Non-secure 219" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS218 ,Interrupt Targets Non-secure 218" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS217 ,Interrupt Targets Non-secure 217" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS216 ,Interrupt Targets Non-secure 216" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS215 ,Interrupt Targets Non-secure 215" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS214 ,Interrupt Targets Non-secure 214" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS213 ,Interrupt Targets Non-secure 213" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS212 ,Interrupt Targets Non-secure 212" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS211 ,Interrupt Targets Non-secure 211" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS210 ,Interrupt Targets Non-secure 210" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS209 ,Interrupt Targets Non-secure 209" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS208 ,Interrupt Targets Non-secure 208" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS207 ,Interrupt Targets Non-secure 207" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS206 ,Interrupt Targets Non-secure 206" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS205 ,Interrupt Targets Non-secure 205" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS204 ,Interrupt Targets Non-secure 204" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS203 ,Interrupt Targets Non-secure 203" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS202 ,Interrupt Targets Non-secure 202" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS201 ,Interrupt Targets Non-secure 201" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS200 ,Interrupt Targets Non-secure 200" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS199 ,Interrupt Targets Non-secure 199" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS198 ,Interrupt Targets Non-secure 198" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS197 ,Interrupt Targets Non-secure 197" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS196 ,Interrupt Targets Non-secure 196" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS195 ,Interrupt Targets Non-secure 195" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS194 ,Interrupt Targets Non-secure 194" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS193 ,Interrupt Targets Non-secure 193" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS192 ,Interrupt Targets Non-secure 192" "Secure,Non-secure" else hgroup.long 0x398++0x03 hide.long 0x00 "NVIC_ITNS6,Interrupt Target Non-Secure Register 6" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x39C++0x03 line.long 0x00 "NVIC_ITNS7,Interrupt Target Non-Secure Register 7" bitfld.long 0x00 31. " ITNS255 ,Interrupt Targets Non-secure 255" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS254 ,Interrupt Targets Non-secure 254" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS253 ,Interrupt Targets Non-secure 253" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS252 ,Interrupt Targets Non-secure 252" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS251 ,Interrupt Targets Non-secure 251" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS250 ,Interrupt Targets Non-secure 250" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS249 ,Interrupt Targets Non-secure 249" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS248 ,Interrupt Targets Non-secure 248" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS247 ,Interrupt Targets Non-secure 247" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS246 ,Interrupt Targets Non-secure 246" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS245 ,Interrupt Targets Non-secure 245" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS244 ,Interrupt Targets Non-secure 244" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS243 ,Interrupt Targets Non-secure 243" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS242 ,Interrupt Targets Non-secure 242" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS241 ,Interrupt Targets Non-secure 241" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS240 ,Interrupt Targets Non-secure 240" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS239 ,Interrupt Targets Non-secure 239" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS238 ,Interrupt Targets Non-secure 238" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS237 ,Interrupt Targets Non-secure 237" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS236 ,Interrupt Targets Non-secure 236" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS235 ,Interrupt Targets Non-secure 235" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS234 ,Interrupt Targets Non-secure 234" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS233 ,Interrupt Targets Non-secure 233" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS232 ,Interrupt Targets Non-secure 232" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS231 ,Interrupt Targets Non-secure 231" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS230 ,Interrupt Targets Non-secure 230" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS229 ,Interrupt Targets Non-secure 229" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS228 ,Interrupt Targets Non-secure 228" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS227 ,Interrupt Targets Non-secure 227" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS226 ,Interrupt Targets Non-secure 226" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS225 ,Interrupt Targets Non-secure 225" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS224 ,Interrupt Targets Non-secure 224" "Secure,Non-secure" else hgroup.long 0x39C++0x03 hide.long 0x00 "NVIC_ITNS7,Interrupt Target Non-Secure Register 7" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x3A0++0x03 line.long 0x00 "NVIC_ITNS8,Interrupt Target Non-Secure Register 8" bitfld.long 0x00 31. " ITNS287 ,Interrupt Targets Non-secure 287" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS286 ,Interrupt Targets Non-secure 286" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS285 ,Interrupt Targets Non-secure 285" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS284 ,Interrupt Targets Non-secure 284" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS283 ,Interrupt Targets Non-secure 283" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS282 ,Interrupt Targets Non-secure 282" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS281 ,Interrupt Targets Non-secure 281" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS280 ,Interrupt Targets Non-secure 280" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS279 ,Interrupt Targets Non-secure 279" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS278 ,Interrupt Targets Non-secure 278" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS277 ,Interrupt Targets Non-secure 277" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS276 ,Interrupt Targets Non-secure 276" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS275 ,Interrupt Targets Non-secure 275" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS274 ,Interrupt Targets Non-secure 274" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS273 ,Interrupt Targets Non-secure 273" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS272 ,Interrupt Targets Non-secure 272" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS271 ,Interrupt Targets Non-secure 271" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS270 ,Interrupt Targets Non-secure 270" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS269 ,Interrupt Targets Non-secure 269" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS268 ,Interrupt Targets Non-secure 268" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS267 ,Interrupt Targets Non-secure 267" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS266 ,Interrupt Targets Non-secure 266" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS265 ,Interrupt Targets Non-secure 265" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS264 ,Interrupt Targets Non-secure 264" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS263 ,Interrupt Targets Non-secure 263" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS262 ,Interrupt Targets Non-secure 262" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS261 ,Interrupt Targets Non-secure 261" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS260 ,Interrupt Targets Non-secure 260" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS259 ,Interrupt Targets Non-secure 259" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS258 ,Interrupt Targets Non-secure 258" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS257 ,Interrupt Targets Non-secure 257" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS256 ,Interrupt Targets Non-secure 256" "Secure,Non-secure" else hgroup.long 0x3A0++0x03 hide.long 0x00 "NVIC_ITNS8,Interrupt Target Non-Secure Register 8" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x3A4++0x03 line.long 0x00 "NVIC_ITNS9,Interrupt Target Non-Secure Register 9" bitfld.long 0x00 31. " ITNS319 ,Interrupt Targets Non-secure 319" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS318 ,Interrupt Targets Non-secure 318" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS317 ,Interrupt Targets Non-secure 317" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS316 ,Interrupt Targets Non-secure 316" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS315 ,Interrupt Targets Non-secure 315" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS314 ,Interrupt Targets Non-secure 314" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS313 ,Interrupt Targets Non-secure 313" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS312 ,Interrupt Targets Non-secure 312" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS311 ,Interrupt Targets Non-secure 311" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS310 ,Interrupt Targets Non-secure 310" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS309 ,Interrupt Targets Non-secure 309" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS308 ,Interrupt Targets Non-secure 308" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS307 ,Interrupt Targets Non-secure 307" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS306 ,Interrupt Targets Non-secure 306" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS305 ,Interrupt Targets Non-secure 305" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS304 ,Interrupt Targets Non-secure 304" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS303 ,Interrupt Targets Non-secure 303" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS302 ,Interrupt Targets Non-secure 302" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS301 ,Interrupt Targets Non-secure 301" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS300 ,Interrupt Targets Non-secure 300" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS299 ,Interrupt Targets Non-secure 299" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS298 ,Interrupt Targets Non-secure 298" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS297 ,Interrupt Targets Non-secure 297" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS296 ,Interrupt Targets Non-secure 296" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS295 ,Interrupt Targets Non-secure 295" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS294 ,Interrupt Targets Non-secure 294" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS293 ,Interrupt Targets Non-secure 293" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS292 ,Interrupt Targets Non-secure 292" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS291 ,Interrupt Targets Non-secure 291" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS290 ,Interrupt Targets Non-secure 290" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS289 ,Interrupt Targets Non-secure 289" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS288 ,Interrupt Targets Non-secure 288" "Secure,Non-secure" else hgroup.long 0x3A4++0x03 hide.long 0x00 "NVIC_ITNS9,Interrupt Target Non-Secure Register 9" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x3A8++0x03 line.long 0x00 "NVIC_ITNS10,Interrupt Target Non-Secure Register 10" bitfld.long 0x00 31. " ITNS351 ,Interrupt Targets Non-secure 351" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS350 ,Interrupt Targets Non-secure 350" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS349 ,Interrupt Targets Non-secure 349" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS348 ,Interrupt Targets Non-secure 348" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS347 ,Interrupt Targets Non-secure 347" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS346 ,Interrupt Targets Non-secure 346" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS345 ,Interrupt Targets Non-secure 345" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS344 ,Interrupt Targets Non-secure 344" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS343 ,Interrupt Targets Non-secure 343" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS342 ,Interrupt Targets Non-secure 342" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS341 ,Interrupt Targets Non-secure 341" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS340 ,Interrupt Targets Non-secure 340" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS339 ,Interrupt Targets Non-secure 339" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS338 ,Interrupt Targets Non-secure 338" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS337 ,Interrupt Targets Non-secure 337" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS336 ,Interrupt Targets Non-secure 336" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS335 ,Interrupt Targets Non-secure 335" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS334 ,Interrupt Targets Non-secure 334" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS333 ,Interrupt Targets Non-secure 333" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS332 ,Interrupt Targets Non-secure 332" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS331 ,Interrupt Targets Non-secure 331" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS330 ,Interrupt Targets Non-secure 330" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS329 ,Interrupt Targets Non-secure 329" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS328 ,Interrupt Targets Non-secure 328" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS327 ,Interrupt Targets Non-secure 327" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS326 ,Interrupt Targets Non-secure 326" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS325 ,Interrupt Targets Non-secure 325" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS324 ,Interrupt Targets Non-secure 324" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS323 ,Interrupt Targets Non-secure 323" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS322 ,Interrupt Targets Non-secure 322" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS321 ,Interrupt Targets Non-secure 321" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS320 ,Interrupt Targets Non-secure 320" "Secure,Non-secure" else hgroup.long 0x3A8++0x03 hide.long 0x00 "NVIC_ITNS10,Interrupt Target Non-Secure Register 10" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x3AC++0x03 line.long 0x00 "NVIC_ITNS11,Interrupt Target Non-Secure Register 11" bitfld.long 0x00 31. " ITNS383 ,Interrupt Targets Non-secure 383" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS382 ,Interrupt Targets Non-secure 382" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS381 ,Interrupt Targets Non-secure 381" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS380 ,Interrupt Targets Non-secure 380" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS379 ,Interrupt Targets Non-secure 379" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS378 ,Interrupt Targets Non-secure 378" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS377 ,Interrupt Targets Non-secure 377" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS376 ,Interrupt Targets Non-secure 376" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS375 ,Interrupt Targets Non-secure 375" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS374 ,Interrupt Targets Non-secure 374" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS373 ,Interrupt Targets Non-secure 373" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS372 ,Interrupt Targets Non-secure 372" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS371 ,Interrupt Targets Non-secure 371" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS370 ,Interrupt Targets Non-secure 370" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS369 ,Interrupt Targets Non-secure 369" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS368 ,Interrupt Targets Non-secure 368" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS367 ,Interrupt Targets Non-secure 367" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS366 ,Interrupt Targets Non-secure 366" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS365 ,Interrupt Targets Non-secure 365" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS364 ,Interrupt Targets Non-secure 364" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS363 ,Interrupt Targets Non-secure 363" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS362 ,Interrupt Targets Non-secure 362" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS361 ,Interrupt Targets Non-secure 361" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS360 ,Interrupt Targets Non-secure 360" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS359 ,Interrupt Targets Non-secure 359" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS358 ,Interrupt Targets Non-secure 358" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS357 ,Interrupt Targets Non-secure 357" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS356 ,Interrupt Targets Non-secure 356" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS355 ,Interrupt Targets Non-secure 355" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS354 ,Interrupt Targets Non-secure 354" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS353 ,Interrupt Targets Non-secure 353" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS352 ,Interrupt Targets Non-secure 352" "Secure,Non-secure" else hgroup.long 0x3AC++0x03 hide.long 0x00 "NVIC_ITNS11,Interrupt Target Non-Secure Register 11" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x3B0++0x03 line.long 0x00 "NVIC_ITNS12,Interrupt Target Non-Secure Register 12" bitfld.long 0x00 31. " ITNS415 ,Interrupt Targets Non-secure 415" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS414 ,Interrupt Targets Non-secure 414" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS413 ,Interrupt Targets Non-secure 413" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS412 ,Interrupt Targets Non-secure 412" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS411 ,Interrupt Targets Non-secure 411" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS410 ,Interrupt Targets Non-secure 410" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS409 ,Interrupt Targets Non-secure 409" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS408 ,Interrupt Targets Non-secure 408" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS407 ,Interrupt Targets Non-secure 407" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS406 ,Interrupt Targets Non-secure 406" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS405 ,Interrupt Targets Non-secure 405" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS404 ,Interrupt Targets Non-secure 404" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS403 ,Interrupt Targets Non-secure 403" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS402 ,Interrupt Targets Non-secure 402" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS401 ,Interrupt Targets Non-secure 401" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS400 ,Interrupt Targets Non-secure 400" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS399 ,Interrupt Targets Non-secure 399" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS398 ,Interrupt Targets Non-secure 398" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS397 ,Interrupt Targets Non-secure 397" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS396 ,Interrupt Targets Non-secure 396" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS395 ,Interrupt Targets Non-secure 395" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS394 ,Interrupt Targets Non-secure 394" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS393 ,Interrupt Targets Non-secure 393" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS392 ,Interrupt Targets Non-secure 392" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS391 ,Interrupt Targets Non-secure 391" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS390 ,Interrupt Targets Non-secure 390" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS389 ,Interrupt Targets Non-secure 389" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS388 ,Interrupt Targets Non-secure 388" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS387 ,Interrupt Targets Non-secure 387" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS386 ,Interrupt Targets Non-secure 386" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS385 ,Interrupt Targets Non-secure 385" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS384 ,Interrupt Targets Non-secure 384" "Secure,Non-secure" else hgroup.long 0x3B0++0x03 hide.long 0x00 "NVIC_ITNS12,Interrupt Target Non-Secure Register 12" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x3B4++0x03 line.long 0x00 "NVIC_ITNS13,Interrupt Target Non-Secure Register 13" bitfld.long 0x00 31. " ITNS447 ,Interrupt Targets Non-secure 447" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS446 ,Interrupt Targets Non-secure 446" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS445 ,Interrupt Targets Non-secure 445" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS444 ,Interrupt Targets Non-secure 444" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS443 ,Interrupt Targets Non-secure 443" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS442 ,Interrupt Targets Non-secure 442" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS441 ,Interrupt Targets Non-secure 441" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS440 ,Interrupt Targets Non-secure 440" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS439 ,Interrupt Targets Non-secure 439" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS438 ,Interrupt Targets Non-secure 438" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS437 ,Interrupt Targets Non-secure 437" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS436 ,Interrupt Targets Non-secure 436" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS435 ,Interrupt Targets Non-secure 435" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS434 ,Interrupt Targets Non-secure 434" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS433 ,Interrupt Targets Non-secure 433" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS432 ,Interrupt Targets Non-secure 432" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS431 ,Interrupt Targets Non-secure 431" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS430 ,Interrupt Targets Non-secure 430" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS429 ,Interrupt Targets Non-secure 429" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS428 ,Interrupt Targets Non-secure 428" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS427 ,Interrupt Targets Non-secure 427" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS426 ,Interrupt Targets Non-secure 426" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS425 ,Interrupt Targets Non-secure 425" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS424 ,Interrupt Targets Non-secure 424" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS423 ,Interrupt Targets Non-secure 423" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS422 ,Interrupt Targets Non-secure 422" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS421 ,Interrupt Targets Non-secure 421" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS420 ,Interrupt Targets Non-secure 420" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS419 ,Interrupt Targets Non-secure 419" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS418 ,Interrupt Targets Non-secure 418" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS417 ,Interrupt Targets Non-secure 417" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS416 ,Interrupt Targets Non-secure 416" "Secure,Non-secure" else hgroup.long 0x3B4++0x03 hide.long 0x00 "NVIC_ITNS13,Interrupt Target Non-Secure Register 13" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x3B8++0x03 line.long 0x00 "NVIC_ITNS14,Interrupt Target Non-Secure Register 14" bitfld.long 0x00 31. " ITNS479 ,Interrupt Targets Non-secure 479" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS478 ,Interrupt Targets Non-secure 478" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS477 ,Interrupt Targets Non-secure 477" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS476 ,Interrupt Targets Non-secure 476" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS475 ,Interrupt Targets Non-secure 475" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS474 ,Interrupt Targets Non-secure 474" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS473 ,Interrupt Targets Non-secure 473" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS472 ,Interrupt Targets Non-secure 472" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS471 ,Interrupt Targets Non-secure 471" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS470 ,Interrupt Targets Non-secure 470" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS469 ,Interrupt Targets Non-secure 469" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS468 ,Interrupt Targets Non-secure 468" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS467 ,Interrupt Targets Non-secure 467" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS466 ,Interrupt Targets Non-secure 466" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS465 ,Interrupt Targets Non-secure 465" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS464 ,Interrupt Targets Non-secure 464" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS463 ,Interrupt Targets Non-secure 463" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS462 ,Interrupt Targets Non-secure 462" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS461 ,Interrupt Targets Non-secure 461" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS460 ,Interrupt Targets Non-secure 460" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS459 ,Interrupt Targets Non-secure 459" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS458 ,Interrupt Targets Non-secure 458" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS457 ,Interrupt Targets Non-secure 457" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS456 ,Interrupt Targets Non-secure 456" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS455 ,Interrupt Targets Non-secure 455" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS454 ,Interrupt Targets Non-secure 454" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS453 ,Interrupt Targets Non-secure 453" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS452 ,Interrupt Targets Non-secure 452" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS451 ,Interrupt Targets Non-secure 451" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS450 ,Interrupt Targets Non-secure 450" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS449 ,Interrupt Targets Non-secure 449" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS448 ,Interrupt Targets Non-secure 448" "Secure,Non-secure" else hgroup.long 0x3B8++0x03 hide.long 0x00 "NVIC_ITNS14,Interrupt Target Non-Secure Register 14" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x0F) group.long 0x3BC++0x03 line.long 0x00 "NVIC_ITNS15,Interrupt Target Non-Secure Register 15" bitfld.long 0x00 31. " ITNS511 ,Interrupt Targets Non-secure 511" "Secure,Non-secure" bitfld.long 0x00 30. " ITNS510 ,Interrupt Targets Non-secure 510" "Secure,Non-secure" bitfld.long 0x00 29. " ITNS509 ,Interrupt Targets Non-secure 509" "Secure,Non-secure" textline " " bitfld.long 0x00 28. " ITNS508 ,Interrupt Targets Non-secure 508" "Secure,Non-secure" bitfld.long 0x00 27. " ITNS507 ,Interrupt Targets Non-secure 507" "Secure,Non-secure" bitfld.long 0x00 26. " ITNS506 ,Interrupt Targets Non-secure 506" "Secure,Non-secure" textline " " bitfld.long 0x00 25. " ITNS505 ,Interrupt Targets Non-secure 505" "Secure,Non-secure" bitfld.long 0x00 24. " ITNS504 ,Interrupt Targets Non-secure 504" "Secure,Non-secure" bitfld.long 0x00 23. " ITNS503 ,Interrupt Targets Non-secure 503" "Secure,Non-secure" textline " " bitfld.long 0x00 22. " ITNS502 ,Interrupt Targets Non-secure 502" "Secure,Non-secure" bitfld.long 0x00 21. " ITNS501 ,Interrupt Targets Non-secure 501" "Secure,Non-secure" bitfld.long 0x00 20. " ITNS500 ,Interrupt Targets Non-secure 500" "Secure,Non-secure" textline " " bitfld.long 0x00 19. " ITNS499 ,Interrupt Targets Non-secure 499" "Secure,Non-secure" bitfld.long 0x00 18. " ITNS498 ,Interrupt Targets Non-secure 498" "Secure,Non-secure" bitfld.long 0x00 17. " ITNS497 ,Interrupt Targets Non-secure 497" "Secure,Non-secure" textline " " bitfld.long 0x00 16. " ITNS496 ,Interrupt Targets Non-secure 496" "Secure,Non-secure" bitfld.long 0x00 15. " ITNS495 ,Interrupt Targets Non-secure 495" "Secure,Non-secure" bitfld.long 0x00 14. " ITNS494 ,Interrupt Targets Non-secure 494" "Secure,Non-secure" textline " " bitfld.long 0x00 13. " ITNS493 ,Interrupt Targets Non-secure 493" "Secure,Non-secure" bitfld.long 0x00 12. " ITNS492 ,Interrupt Targets Non-secure 492" "Secure,Non-secure" bitfld.long 0x00 11. " ITNS491 ,Interrupt Targets Non-secure 491" "Secure,Non-secure" textline " " bitfld.long 0x00 10. " ITNS490 ,Interrupt Targets Non-secure 490" "Secure,Non-secure" bitfld.long 0x00 9. " ITNS489 ,Interrupt Targets Non-secure 489" "Secure,Non-secure" bitfld.long 0x00 8. " ITNS488 ,Interrupt Targets Non-secure 488" "Secure,Non-secure" textline " " bitfld.long 0x00 7. " ITNS487 ,Interrupt Targets Non-secure 487" "Secure,Non-secure" bitfld.long 0x00 6. " ITNS486 ,Interrupt Targets Non-secure 486" "Secure,Non-secure" bitfld.long 0x00 5. " ITNS485 ,Interrupt Targets Non-secure 485" "Secure,Non-secure" textline " " bitfld.long 0x00 4. " ITNS484 ,Interrupt Targets Non-secure 484" "Secure,Non-secure" bitfld.long 0x00 3. " ITNS483 ,Interrupt Targets Non-secure 483" "Secure,Non-secure" bitfld.long 0x00 2. " ITNS482 ,Interrupt Targets Non-secure 482" "Secure,Non-secure" textline " " bitfld.long 0x00 1. " ITNS481 ,Interrupt Targets Non-secure 481" "Secure,Non-secure" bitfld.long 0x00 0. " ITNS480 ,Interrupt Targets Non-secure 480" "Secure,Non-secure" else hgroup.long 0x3BC++0x03 hide.long 0x00 "NVIC_ITNS15,Interrupt Target Non-Secure Register 15" endif tree.end tree "Interrupt Priority Registers" group.long 0x400++0x1F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x01) group.long 0x420++0x1F line.long 0x0 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x4 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x8 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0xC "IPR11,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x10 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x14 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x18 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x1C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" else hgroup.long 0x420++0x1F hide.long 0x0 "IPR8,Interrupt Priority Register" hide.long 0x4 "IPR9,Interrupt Priority Register" hide.long 0x8 "IPR10,Interrupt Priority Register" hide.long 0xC "IPR11,Interrupt Priority Register" hide.long 0x10 "IPR12,Interrupt Priority Register" hide.long 0x14 "IPR13,Interrupt Priority Register" hide.long 0x18 "IPR14,Interrupt Priority Register" hide.long 0x1C "IPR15,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x02) group.long 0x440++0x1F line.long 0x0 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x4 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x8 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0xC "IPR19,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x10 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x14 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x18 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x1C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" else hgroup.long 0x440++0x1F hide.long 0x0 "IPR16,Interrupt Priority Register" hide.long 0x4 "IPR17,Interrupt Priority Register" hide.long 0x8 "IPR18,Interrupt Priority Register" hide.long 0xC "IPR19,Interrupt Priority Register" hide.long 0x10 "IPR20,Interrupt Priority Register" hide.long 0x14 "IPR21,Interrupt Priority Register" hide.long 0x18 "IPR22,Interrupt Priority Register" hide.long 0x1C "IPR23,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x03) group.long 0x460++0x1F line.long 0x0 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x4 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x8 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0xC "IPR27,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x10 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x14 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x18 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x1C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" else hgroup.long 0x460++0x1F hide.long 0x0 "IPR24,Interrupt Priority Register" hide.long 0x4 "IPR25,Interrupt Priority Register" hide.long 0x8 "IPR26,Interrupt Priority Register" hide.long 0xC "IPR27,Interrupt Priority Register" hide.long 0x10 "IPR28,Interrupt Priority Register" hide.long 0x14 "IPR29,Interrupt Priority Register" hide.long 0x18 "IPR30,Interrupt Priority Register" hide.long 0x1C "IPR31,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x04) group.long 0x480++0x1F line.long 0x0 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x4 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x8 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0xC "IPR35,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x10 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x14 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x18 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x1C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" else hgroup.long 0x480++0x1F hide.long 0x0 "IPR32,Interrupt Priority Register" hide.long 0x4 "IPR33,Interrupt Priority Register" hide.long 0x8 "IPR34,Interrupt Priority Register" hide.long 0xC "IPR35,Interrupt Priority Register" hide.long 0x10 "IPR36,Interrupt Priority Register" hide.long 0x14 "IPR37,Interrupt Priority Register" hide.long 0x18 "IPR38,Interrupt Priority Register" hide.long 0x1C "IPR39,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x05) group.long 0x4A0++0x1F line.long 0x0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0x4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0x8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0x10 "IPR44,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0x14 "IPR45,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0x18 "IPR46,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0x1C "IPR47,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" else hgroup.long 0x4A0++0x1F hide.long 0x0 "IPR40,Interrupt Priority Register" hide.long 0x4 "IPR41,Interrupt Priority Register" hide.long 0x8 "IPR42,Interrupt Priority Register" hide.long 0xC "IPR43,Interrupt Priority Register" hide.long 0x10 "IPR44,Interrupt Priority Register" hide.long 0x14 "IPR45,Interrupt Priority Register" hide.long 0x18 "IPR46,Interrupt Priority Register" hide.long 0x1C "IPR47,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x06) group.long 0x4C0++0x1F line.long 0x0 "IPR48,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority" line.long 0x4 "IPR49,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority" line.long 0x8 "IPR50,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority" line.long 0xC "IPR51,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority" line.long 0x10 "IPR52,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_211 ,Interrupt 211 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_210 ,Interrupt 210 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_209 ,Interrupt 209 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_208 ,Interrupt 208 Priority" line.long 0x14 "IPR53,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_215 ,Interrupt 215 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_214 ,Interrupt 214 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_213 ,Interrupt 213 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_212 ,Interrupt 212 Priority" line.long 0x18 "IPR54,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_219 ,Interrupt 219 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_218 ,Interrupt 218 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_217 ,Interrupt 217 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_216 ,Interrupt 216 Priority" line.long 0x1C "IPR55,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_223 ,Interrupt 223 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_222 ,Interrupt 222 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_221 ,Interrupt 221 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_220 ,Interrupt 220 Priority" else hgroup.long 0x4C0++0x1F hide.long 0x0 "IPR48,Interrupt Priority Register" hide.long 0x4 "IPR49,Interrupt Priority Register" hide.long 0x8 "IPR50,Interrupt Priority Register" hide.long 0xC "IPR51,Interrupt Priority Register" hide.long 0x10 "IPR52,Interrupt Priority Register" hide.long 0x14 "IPR53,Interrupt Priority Register" hide.long 0x18 "IPR54,Interrupt Priority Register" hide.long 0x1C "IPR55,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x07) group.long 0x4E0++0x1F line.long 0x0 "IPR56,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority" line.long 0x4 "IPR57,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority" line.long 0x8 "IPR58,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority" line.long 0xC "IPR59,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority" line.long 0x10 "IPR60,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_243 ,Interrupt 243 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_242 ,Interrupt 242 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_241 ,Interrupt 241 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_240 ,Interrupt 240 Priority" line.long 0x14 "IPR61,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_247 ,Interrupt 247 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_246 ,Interrupt 246 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_245 ,Interrupt 245 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_244 ,Interrupt 244 Priority" line.long 0x18 "IPR62,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_251 ,Interrupt 251 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_250 ,Interrupt 250 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_249 ,Interrupt 249 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_248 ,Interrupt 248 Priority" line.long 0x1C "IPR63,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_255 ,Interrupt 255 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_254 ,Interrupt 254 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_253 ,Interrupt 253 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_252 ,Interrupt 252 Priority" else hgroup.long 0x4E0++0x1F hide.long 0x0 "IPR56,Interrupt Priority Register" hide.long 0x4 "IPR57,Interrupt Priority Register" hide.long 0x8 "IPR58,Interrupt Priority Register" hide.long 0xC "IPR59,Interrupt Priority Register" hide.long 0x10 "IPR60,Interrupt Priority Register" hide.long 0x14 "IPR61,Interrupt Priority Register" hide.long 0x18 "IPR62,Interrupt Priority Register" hide.long 0x1C "IPR63,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x08) group.long 0x500++0x1F line.long 0x0 "IPR64,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_259 ,Interrupt 259 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_258 ,Interrupt 258 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_257 ,Interrupt 257 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_256 ,Interrupt 256 Priority" line.long 0x4 "IPR65,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_263 ,Interrupt 263 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_262 ,Interrupt 262 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_261 ,Interrupt 261 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_260 ,Interrupt 260 Priority" line.long 0x8 "IPR66,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_267 ,Interrupt 267 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_266 ,Interrupt 266 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_265 ,Interrupt 265 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_264 ,Interrupt 264 Priority" line.long 0xC "IPR67,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_271 ,Interrupt 271 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_270 ,Interrupt 270 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_269 ,Interrupt 269 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_268 ,Interrupt 268 Priority" line.long 0x10 "IPR68,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_275 ,Interrupt 275 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_274 ,Interrupt 274 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_273 ,Interrupt 273 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_272 ,Interrupt 272 Priority" line.long 0x14 "IPR69,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_279 ,Interrupt 279 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_278 ,Interrupt 278 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_277 ,Interrupt 277 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_276 ,Interrupt 276 Priority" line.long 0x18 "IPR70,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_283 ,Interrupt 283 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_282 ,Interrupt 282 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_281 ,Interrupt 281 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_280 ,Interrupt 280 Priority" line.long 0x1C "IPR71,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_287 ,Interrupt 287 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_286 ,Interrupt 286 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_285 ,Interrupt 285 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_284 ,Interrupt 284 Priority" else hgroup.long 0x500++0x1F hide.long 0x0 "IPR64,Interrupt Priority Register" hide.long 0x4 "IPR65,Interrupt Priority Register" hide.long 0x8 "IPR66,Interrupt Priority Register" hide.long 0xC "IPR67,Interrupt Priority Register" hide.long 0x10 "IPR68,Interrupt Priority Register" hide.long 0x14 "IPR69,Interrupt Priority Register" hide.long 0x18 "IPR70,Interrupt Priority Register" hide.long 0x1C "IPR71,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x09) group.long 0x520++0x1F line.long 0x0 "IPR72,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_291 ,Interrupt 291 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_290 ,Interrupt 290 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_289 ,Interrupt 289 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_288 ,Interrupt 288 Priority" line.long 0x4 "IPR73,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_295 ,Interrupt 295 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_294 ,Interrupt 294 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_293 ,Interrupt 293 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_292 ,Interrupt 292 Priority" line.long 0x8 "IPR74,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_299 ,Interrupt 299 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_298 ,Interrupt 298 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_297 ,Interrupt 297 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_296 ,Interrupt 296 Priority" line.long 0xC "IPR75,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_303 ,Interrupt 303 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_302 ,Interrupt 302 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_301 ,Interrupt 301 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_300 ,Interrupt 300 Priority" line.long 0x10 "IPR76,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_307 ,Interrupt 307 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_306 ,Interrupt 306 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_305 ,Interrupt 305 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_304 ,Interrupt 304 Priority" line.long 0x14 "IPR77,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_311 ,Interrupt 311 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_310 ,Interrupt 310 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_309 ,Interrupt 309 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_308 ,Interrupt 308 Priority" line.long 0x18 "IPR78,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_315 ,Interrupt 315 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_314 ,Interrupt 314 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_313 ,Interrupt 313 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_312 ,Interrupt 312 Priority" line.long 0x1C "IPR79,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_319 ,Interrupt 319 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_318 ,Interrupt 318 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_317 ,Interrupt 317 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_316 ,Interrupt 316 Priority" else hgroup.long 0x520++0x1F hide.long 0x0 "IPR72,Interrupt Priority Register" hide.long 0x4 "IPR73,Interrupt Priority Register" hide.long 0x8 "IPR74,Interrupt Priority Register" hide.long 0xC "IPR75,Interrupt Priority Register" hide.long 0x10 "IPR76,Interrupt Priority Register" hide.long 0x14 "IPR77,Interrupt Priority Register" hide.long 0x18 "IPR78,Interrupt Priority Register" hide.long 0x1C "IPR79,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0A) group.long 0x540++0x1F line.long 0x0 "IPR80,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_323 ,Interrupt 323 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_322 ,Interrupt 322 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_321 ,Interrupt 321 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_320 ,Interrupt 320 Priority" line.long 0x4 "IPR81,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_327 ,Interrupt 327 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_326 ,Interrupt 326 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_325 ,Interrupt 325 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_324 ,Interrupt 324 Priority" line.long 0x8 "IPR82,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_331 ,Interrupt 331 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_330 ,Interrupt 330 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_329 ,Interrupt 329 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_328 ,Interrupt 328 Priority" line.long 0xC "IPR83,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_335 ,Interrupt 335 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_334 ,Interrupt 334 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_333 ,Interrupt 333 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_332 ,Interrupt 332 Priority" line.long 0x10 "IPR84,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_339 ,Interrupt 339 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_338 ,Interrupt 338 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_337 ,Interrupt 337 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_336 ,Interrupt 336 Priority" line.long 0x14 "IPR85,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_343 ,Interrupt 343 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_342 ,Interrupt 342 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_341 ,Interrupt 341 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_340 ,Interrupt 340 Priority" line.long 0x18 "IPR86,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_347 ,Interrupt 347 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_346 ,Interrupt 346 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_345 ,Interrupt 345 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_344 ,Interrupt 344 Priority" line.long 0x1C "IPR87,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_351 ,Interrupt 351 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_350 ,Interrupt 350 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_349 ,Interrupt 349 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_348 ,Interrupt 348 Priority" else hgroup.long 0x540++0x1F hide.long 0x0 "IPR80,Interrupt Priority Register" hide.long 0x4 "IPR81,Interrupt Priority Register" hide.long 0x8 "IPR82,Interrupt Priority Register" hide.long 0xC "IPR83,Interrupt Priority Register" hide.long 0x10 "IPR84,Interrupt Priority Register" hide.long 0x14 "IPR85,Interrupt Priority Register" hide.long 0x18 "IPR86,Interrupt Priority Register" hide.long 0x1C "IPR87,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0B) group.long 0x560++0x1F line.long 0x0 "IPR88,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_355 ,Interrupt 355 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_354 ,Interrupt 354 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_353 ,Interrupt 353 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_352 ,Interrupt 352 Priority" line.long 0x4 "IPR89,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_359 ,Interrupt 359 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_358 ,Interrupt 358 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_357 ,Interrupt 357 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_356 ,Interrupt 356 Priority" line.long 0x8 "IPR90,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_363 ,Interrupt 363 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_362 ,Interrupt 362 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_361 ,Interrupt 361 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_360 ,Interrupt 360 Priority" line.long 0xC "IPR91,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_367 ,Interrupt 367 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_366 ,Interrupt 366 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_365 ,Interrupt 365 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_364 ,Interrupt 364 Priority" line.long 0x10 "IPR92,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_371 ,Interrupt 371 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_370 ,Interrupt 370 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_369 ,Interrupt 369 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_368 ,Interrupt 368 Priority" line.long 0x14 "IPR93,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_375 ,Interrupt 375 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_374 ,Interrupt 374 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_373 ,Interrupt 373 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_372 ,Interrupt 372 Priority" line.long 0x18 "IPR94,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_379 ,Interrupt 379 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_378 ,Interrupt 378 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_377 ,Interrupt 377 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_376 ,Interrupt 376 Priority" line.long 0x1C "IPR95,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_383 ,Interrupt 383 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_382 ,Interrupt 382 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_381 ,Interrupt 381 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_380 ,Interrupt 380 Priority" else hgroup.long 0x560++0x1F hide.long 0x0 "IPR88,Interrupt Priority Register" hide.long 0x4 "IPR89,Interrupt Priority Register" hide.long 0x8 "IPR90,Interrupt Priority Register" hide.long 0xC "IPR91,Interrupt Priority Register" hide.long 0x10 "IPR92,Interrupt Priority Register" hide.long 0x14 "IPR93,Interrupt Priority Register" hide.long 0x18 "IPR94,Interrupt Priority Register" hide.long 0x1C "IPR95,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0C) group.long 0x580++0x1F line.long 0x0 "IPR96,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_387 ,Interrupt 387 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_386 ,Interrupt 386 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_385 ,Interrupt 385 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_384 ,Interrupt 384 Priority" line.long 0x4 "IPR97,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_391 ,Interrupt 391 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_390 ,Interrupt 390 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_389 ,Interrupt 389 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_388 ,Interrupt 388 Priority" line.long 0x8 "IPR98,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_395 ,Interrupt 395 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_394 ,Interrupt 394 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_393 ,Interrupt 393 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_392 ,Interrupt 392 Priority" line.long 0xC "IPR99,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_399 ,Interrupt 399 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_398 ,Interrupt 398 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_397 ,Interrupt 397 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_396 ,Interrupt 396 Priority" line.long 0x10 "IPR100,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_403 ,Interrupt 403 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_402 ,Interrupt 402 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_401 ,Interrupt 401 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_400 ,Interrupt 400 Priority" line.long 0x14 "IPR101,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_407 ,Interrupt 407 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_406 ,Interrupt 406 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_405 ,Interrupt 405 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_404 ,Interrupt 404 Priority" line.long 0x18 "IPR102,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_411 ,Interrupt 411 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_410 ,Interrupt 410 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_409 ,Interrupt 409 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_408 ,Interrupt 408 Priority" line.long 0x1C "IPR103,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_415 ,Interrupt 415 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_414 ,Interrupt 414 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_413 ,Interrupt 413 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_412 ,Interrupt 412 Priority" else hgroup.long 0x580++0x1F hide.long 0x0 "IPR96,Interrupt Priority Register" hide.long 0x4 "IPR97,Interrupt Priority Register" hide.long 0x8 "IPR98,Interrupt Priority Register" hide.long 0xC "IPR99,Interrupt Priority Register" hide.long 0x10 "IPR100,Interrupt Priority Register" hide.long 0x14 "IPR101,Interrupt Priority Register" hide.long 0x18 "IPR102,Interrupt Priority Register" hide.long 0x1C "IPR103,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0D) group.long 0x5A0++0x1F line.long 0x0 "IPR104,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_419 ,Interrupt 419 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_418 ,Interrupt 418 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_417 ,Interrupt 417 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_416 ,Interrupt 416 Priority" line.long 0x4 "IPR105,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_423 ,Interrupt 423 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_422 ,Interrupt 422 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_421 ,Interrupt 421 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_420 ,Interrupt 420 Priority" line.long 0x8 "IPR106,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_427 ,Interrupt 427 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_426 ,Interrupt 426 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_425 ,Interrupt 425 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_424 ,Interrupt 424 Priority" line.long 0xC "IPR107,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_431 ,Interrupt 431 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_430 ,Interrupt 430 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_429 ,Interrupt 429 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_428 ,Interrupt 428 Priority" line.long 0x10 "IPR108,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_435 ,Interrupt 435 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_434 ,Interrupt 434 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_433 ,Interrupt 433 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_432 ,Interrupt 432 Priority" line.long 0x14 "IPR109,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_439 ,Interrupt 439 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_438 ,Interrupt 438 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_437 ,Interrupt 437 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_436 ,Interrupt 436 Priority" line.long 0x18 "IPR110,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_443 ,Interrupt 443 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_442 ,Interrupt 442 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_441 ,Interrupt 441 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_440 ,Interrupt 440 Priority" line.long 0x1C "IPR111,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_447 ,Interrupt 447 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_446 ,Interrupt 446 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_445 ,Interrupt 445 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_444 ,Interrupt 444 Priority" else hgroup.long 0x5A0++0x1F hide.long 0x0 "IPR104,Interrupt Priority Register" hide.long 0x4 "IPR105,Interrupt Priority Register" hide.long 0x8 "IPR106,Interrupt Priority Register" hide.long 0xC "IPR107,Interrupt Priority Register" hide.long 0x10 "IPR108,Interrupt Priority Register" hide.long 0x14 "IPR109,Interrupt Priority Register" hide.long 0x18 "IPR110,Interrupt Priority Register" hide.long 0x1C "IPR111,Interrupt Priority Register" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)>=0x0E) group.long 0x5C0++0x1F line.long 0x0 "IPR112,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_451 ,Interrupt 451 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_450 ,Interrupt 450 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_449 ,Interrupt 449 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_448 ,Interrupt 448 Priority" line.long 0x4 "IPR113,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_455 ,Interrupt 455 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_454 ,Interrupt 454 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_453 ,Interrupt 453 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_452 ,Interrupt 452 Priority" line.long 0x8 "IPR114,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_459 ,Interrupt 459 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_458 ,Interrupt 458 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_457 ,Interrupt 457 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_456 ,Interrupt 456 Priority" line.long 0xC "IPR115,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_463 ,Interrupt 463 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_462 ,Interrupt 462 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_461 ,Interrupt 461 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_460 ,Interrupt 460 Priority" line.long 0x10 "IPR116,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_467 ,Interrupt 467 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_466 ,Interrupt 466 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_465 ,Interrupt 465 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_464 ,Interrupt 464 Priority" line.long 0x14 "IPR117,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_471 ,Interrupt 471 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_470 ,Interrupt 470 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_469 ,Interrupt 469 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_468 ,Interrupt 468 Priority" line.long 0x18 "IPR118,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_475 ,Interrupt 475 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_474 ,Interrupt 474 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_473 ,Interrupt 473 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_472 ,Interrupt 472 Priority" line.long 0x1C "IPR119,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_479 ,Interrupt 479 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_478 ,Interrupt 478 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_477 ,Interrupt 477 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_476 ,Interrupt 476 Priority" else hgroup.long 0x5C0++0x1F hide.long 0x0 "IPR112,Interrupt Priority Register" hide.long 0x4 "IPR113,Interrupt Priority Register" hide.long 0x8 "IPR114,Interrupt Priority Register" hide.long 0xC "IPR115,Interrupt Priority Register" hide.long 0x10 "IPR116,Interrupt Priority Register" hide.long 0x14 "IPR117,Interrupt Priority Register" hide.long 0x18 "IPR118,Interrupt Priority Register" hide.long 0x1C "IPR119,Interrupt Priority Register" endif tree.end width 0x0b else newline textline "COREDEBUG component base address not specified" newline endif tree.end sif (CORENAME()=="CORTEXM33F") tree "Floating-point Unit (FPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 8. group.long 0xF34++0x0B line.long 0x00 "FPCCR,Floating-Point Context Control Register" bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled" bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled" bitfld.long 0x00 29. " LSPENS ,This bit controls whether the LSPEN bit is writeable from the Non-secure state" "Writeable,Write ignored" newline bitfld.long 0x00 28. " CLRONRET ,Clear floating point caller saved registers on exception return" "Disabled,Enabled" bitfld.long 0x00 27. " CLRONRETS ,Clear on return Secure only" "Both states,Secure only" bitfld.long 0x00 26. " TS ,Treat as Secure" "Disabled,Enabled" newline bitfld.long 0x00 10. " UFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the UsageFault exception to pending" "Not able,Able" bitfld.long 0x00 9. " SPLIMVIOL ,Indicates whether the FP context violates the stack pointer limit that was active when lazy state preservation was activated" "Low,High" bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able" newline bitfld.long 0x00 7. " SFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the SecureFault exception to pending" "Not able,Able" bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able" bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able" newline bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able" bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread" bitfld.long 0x00 2. " S ,Indicates the FP context belongs to the specified security state" "Non-secure,Secure" newline bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged" bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active" line.long 0x04 "FPCAR,Floating-Point Context Address Register" hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame" line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register" bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative" bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation" bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode" newline bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero" rgroup.long 0xF40++0x0B line.long 0x00 "MVFR0,Media and FP Feature Register 0" bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..." bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..." bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..." newline bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..." bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..." bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..." line.long 0x04 "MVFR1,Media and FP Feature Register 1" bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..." bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..." newline bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..." bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Fully denormalized,?..." line.long 0x08 "MVFR2,Media and FP Feature Register 2" bitfld.long 0x08 4.--7. " VFP_MISC ,Indicates the hardware support for FP miscellaneous features" "Not supported,,,,Supported,?..." width 0xB else newline textline "COREDEBUG component base address not specified" newline endif tree.end endif tree "Debug" tree "Core Debug" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 13. group.long 0xD30++0x03 line.long 0x00 "DFSR,Debug Fault Status Register" eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated" eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered" eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated" newline eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated" eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated" newline hgroup.long 0xDF0++0x03 hide.long 0x00 "DHCSR,Debug Halting Control and Status Register" in newline wgroup.long 0xDF4++0x03 line.long 0x00 "DCRSR,Debug Core Register Selector Register" bitfld.long 0x00 16. " REGWNR ,Specifies the access type for the transfer" "Read,Write" hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register, special-purpose register or Floating-point extension register" group.long 0xDF8++0x03 line.long 0x00 "DCRDR,Debug Core Register Data Register" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000) group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 20. " SDME ,Indicates whether the DebugMonitor targets the Secure or the Non-secure state" "Non-secure,Secure" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 11. " VC_SFERR ,SecureFault vector catch enable" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap on a fault occurring during exception entry or exception return" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception caused by a state information error" "Disabled,Enabled" bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception caused by a checking error" "Disabled,Enabled" newline bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" else group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 20. " SDME ,Indicates whether the DebugMonitor targets the Secure or the Non-secure state" "Non-secure,Secure" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 11. " VC_SFERR ,SecureFault vector catch enable" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap on a fault occurring during exception entry or exception return" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception caused by a state information error" "Disabled,Enabled" bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception caused by a checking error" "Disabled,Enabled" newline bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" endif newline group.long 0xE04++0x07 line.long 0x00 "DAUTHCTRL,Debug Authentication Control Register" bitfld.long 0x00 3. " INTSPNIDEN ,Internal secure non-invasive debug enable" "Disabled,Enabled" bitfld.long 0x00 2. " SPNIDENSEL ,Secure non-invasive debug enable select.Selects between DAUTHCTRL and the IMPLEMENTATION DEFINED external authentication interface for control of Secure non-invasive debug" "Ext. auth. interface,DAUTHCTRL.INTSPNIDEN" bitfld.long 0x00 1. " INTSPIDEN ,Internal secure invasive debug enable" "Disabled,Enabled" bitfld.long 0x00 0. " SPIDENSEL ,Secure invasive debug enable select. Selects between DAUTHCTRL and the IMPLEMENTATION DEFINED external authentication interface for control of Secure invasive debug" "Ext. auth. interface,DAUTHCTRL.INTSPIDEN" line.long 0x04 "DSCSR,Debug Security Control and Status Register" bitfld.long 0x04 16. " CDS ,This field indicates the current security state of the processor" "Non-secure,Secure" bitfld.long 0x04 1. " SBRSEL ,Secure banked register select" "Non-secure,Secure" bitfld.long 0x04 0. " SBRSELEN ,Secure banked register select enable" "Disabled,Enabled" rgroup.long 0xFB8++0x03 line.long 0x00 "DAUTHSTATUS,Debug Authentication Status Register" bitfld.long 0x00 7. " SNI ,Secure non-invasive debug implemented" ",Implemented" bitfld.long 0x00 6. " SNE ,Secure non-invasive debug enabled" "0,1" bitfld.long 0x00 5. " SI ,Secure invasive debug features implemented" ",Implemented" bitfld.long 0x00 4. " SE ,Secure invasive debug enabled" "0,1" newline bitfld.long 0x00 3. " NSNI ,Non-secure non-invasive debug features implemented" ",Implemented" bitfld.long 0x00 2. " NSNE ,Non-secure non-invasive debug enabled" "0,1" bitfld.long 0x00 1. " NSI ,Non-secure invasive debug features implemented" ",Implemented" bitfld.long 0x00 0. " NSE ,Non-secure invasive debug enabled" "0,1" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Flash Patch and Breakpoint Unit (FPB)" sif COMPonent.AVAILABLE("FPB") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1)) width 12. group.long 0x00++0x03 line.long 0x00 "FP_CTRL,Flash Patch Control Register" bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Reserved,Version 2,?..." rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,?..." rbitfld.long 0x00 8.--11. " NUM_LIT ,Number of literal comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 1. " KEY ,Key Field" "Low,High" bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled" textline " " if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x04))&0x20000000)==0x20000000) rgroup.long 0x04++0x03 line.long 0x00 "FP_REMAP,Flash Patch Remap Register" bitfld.long 0x00 29. " RMPSPT ,Indicates whether the FPB unit supports Flash Patch remap" "Not supported,Supported" hexmask.long 0x00 5.--28. 0x20 " REMAP ,Remap address" else rgroup.long 0x04++0x03 line.long 0x00 "FP_REMAP,Flash Patch Remap Register" bitfld.long 0x00 29. " RMPSPT ,Indicates whether the FPB unit supports Flash Patch remap" "Not supported,Supported" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00) group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00) group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00) group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00) group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00) group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00) group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00) group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00) group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" bitfld.long 0x00 31. " FE ,Specifies if Flash Patch enabled" "Disabled,Enabled" hexmask.long 0x00 2.--28. 0x04 " FPADDR ,Specifies bits[28:2] of the Flash Patch address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" else group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" textfld " " hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Selects between flashpatch and breakpoint functionality" "FP mode,BP mode" endif tree "CoreSight Identification Registers" width 12. rgroup.long 0xFCC++0x03 line.long 0x00 "FP_DEVTYPE,FPB CoreSight Device Type Register" hexmask.long.byte 0x00 4.--7. 1. " SUB ,Sub-type" hexmask.long.byte 0x00 0.--3. 1. " MAJOR ,Major type" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xFBC))&0x100000)==0x100000) rgroup.long 0xFBC++0x03 line.long 0x00 "FP_DEVARCH,FPB CoreSight Device Architecture Register" hexmask.long.word 0x00 21.--31. 1. " ARCHITECT ,Component architect" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" bitfld.long 0x00 16.--19. " REVISION ,Architecture revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " ARCHVER ,Architecture version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " ARCHPART ,Architecture part" else rgroup.long 0xFBC++0x03 line.long 0x00 "FP_DEVARCH,FPB CoreSight Device Architecture Register" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" endif rgroup.long 0xFE0++0x0F line.long 0x00 "FP_PIDR0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "FP_PIDR1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "FP_PIDR2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0C "FP_PIDR3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "FP_PIDR4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "FP_CIDR0,Component ID0 (Preamble)" hexmask.long.byte 0x00 0.--7. 1. " PRMBL_0 ,CoreSight component identification preamble" line.long 0x04 "FP_CIDR1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " PRMBL_1 ,CoreSight component class" line.long 0x08 "FP_CIDR2,Component ID2" hexmask.long.byte 0x08 0.--7. 1. " PRMBL_2 ,CoreSight component identification preamble" line.long 0x0c "FP_CIDR3,Component ID3" hexmask.long.byte 0x0C 0.--7. 1. " PRMBL_3 ,CoreSight component identification preamble" tree.end width 0x0b else newline textline "FPB component base address not specified" newline endif tree.end tree "Data Watchpoint and Trace Unit (DWT)" sif COMPonent.AVAILABLE("DWT") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)) width 16. group.long 0x00++0x03 line.long 0x00 "DWT_CTRL,Control Register" rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,?..." rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported" rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported" textline " " rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported" bitfld.long 0x00 23. " CYCDISS ,Controls whether the cycle counter is prevented from incrementing while the PE is in Secure state" "No,Yes" bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled" textline " " bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled" bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled" bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled" bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled" bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " PCSAMPLENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled" bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]" bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]" textline " " bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)))&0x1000000)==0x0000000) group.long 0x04++0x03 line.long 0x00 "DWT_CYCCNT,Cycle Count register" endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)))&0x2000000)==0x0000000) group.long 0x08++0x17 line.long 0x00 "DWT_CPICNT,CPI Count register" hexmask.long.byte 0x00 0.--7. 1. " CPICNT ,Base instruction overhead counter" line.long 0x04 "DWT_EXCCNT,Exception Overhead Count Register" hexmask.long.byte 0x04 0.--7. 1. " EXCCNT ,The exception overhead counter" line.long 0x08 "DWT_SLEEPCNT,Sleep Count Register" hexmask.long.byte 0x08 0.--7. 1. " SLEEPCNT ,Sleep Counter" line.long 0x10 "DWT_LSUCNT,LSU Count Register" hexmask.long.byte 0x10 0.--7. 1. " LSUCNT ,Load-store overhead counter" line.long 0x14 "DWT_FOLDCNT,Folded-instruction Count register" hexmask.long.byte 0x14 0.--7. 1. " FOLDCNT ,Folded-instruction counter" endif rgroup.long 0x1C++0x03 line.long 0x00 "DWT_PCSR,Program Counter Sample register" textline " " if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)==0x1) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0x4) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0xC) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x20+0x08)&0xF)<0xF) group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x20++0x03 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" endif group.long (0x20+0x08)++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Register 0" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)==0x1) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0x4) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0xC) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08)&0xF)<0xF) group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x30++0x03 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" endif group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Register 1" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)==0x1) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0x4) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0xC) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08)&0xF)<0xF) group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x40++0x03 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" endif group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Register 2" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)==0x1) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 0.--31. 1. " CYCVALUE ,Cycle value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0x2&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0x4) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 1.--31. 1. " PCVALUE ,PC value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0x8&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0xC) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 0.--31. 1. " DVALUE ,Data1 value" elif ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0x4&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0x8||(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)>=0xC&&(per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08)&0xF)<0xF) group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" hexmask.long 0x00 0.--31. 0x01 " DADDR ,Data address" else group.long 0x50++0x03 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" endif group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Register 3" bitfld.long 0x00 27.--31. " ID ,Identifies the capabilities of comparator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " MATCHED ,Comparator match" "Not matched,Matched" bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" textline " " bitfld.long 0x00 4.--5. " ACTION ,These bits are ignored and the comparator generates no actions if it is disabled by MATCH" "Trigger only,Generate debug event,Trace data value,Trace address" bitfld.long 0x00 0.--3. " MATCH ,Defines what this comparator matches against" "Disabled,Cycle counter,Instruction address,Instruction address limit,Data address (RW),Data address (W),Data address (R),Data address limit,Data value (RW),Data value (W),Data value (R),Linked data value,Data address/Data value (RW),Data address/Data value (W),Data address/Data value (R),Reserved" tree "CoreSight Identification Registers" width 13. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0xFBC))&0x100000)==0x100000) rgroup.long 0xFBC++0x03 line.long 0x00 "DWT_DEVARCH,DWT CoreSight Device Architecture Register" hexmask.long.word 0x00 21.--31. 1. " ARCHITECT ,Component architect" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" bitfld.long 0x00 16.--19. " REVISION ,Architecture revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 12.--15. " ARCHVER ,Architecture version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " ARCHPART ,Architecture part" else rgroup.long 0xFBC++0x03 line.long 0x00 "DWT_DEVARCH,DWT CoreSight Device Architecture Register" bitfld.long 0x00 20. " PRESENT ,Register present" "Not present,Present" endif rgroup.long 0xFCC++0x03 line.long 0x00 "DWT_DEVTYPE,Device Type Identifier register" hexmask.long.byte 0x00 4.--7. 1. " SUB ,Sub-type" hexmask.long.byte 0x00 0.--3. 1. " MAJOR ,Major type" rgroup.long 0xFE0++0x0F line.long 0x00 "DWT_PIDR0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "DWT_PIDR1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "DWT_PIDR2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "DWT_PIDR3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "DWT_PIDR4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "DWT_CIDR0,Component ID0 (Preamble)" hexmask.long.byte 0x00 0.--7. 1. " PRMBL_0 ,CoreSight component identification preamble" line.long 0x04 "DWT_CIDR1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " PRMBL_1 ,CoreSight component class" line.long 0x08 "DWT_CIDR2,Component ID2" hexmask.long.byte 0x08 0.--7. 1. " PRMBL_2 ,CoreSight component identification preamble" line.long 0x0c "DWT_CIDR3,Component ID3" hexmask.long.byte 0x0C 0.--7. 1. " PRMBL_3 ,CoreSight component identification preamble" tree.end width 0x0b else newline textline "DWT component base address not specified" newline endif tree.end tree.end AUTOINDENT.POP tree.end endif autoindent.on center tree tree "ADC" repeat 2. (list 0. 1.) (list ad:0x28040000 ad:0x280A2000) tree "ADC$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline bitfld.long 0x00 12.--14. "NUM_FIFO,Number of FIFOs" "0: NUM_FIFO_0,1: This design supports one result FIFO,2: This design supports two result FIFOs,3: This design supports three result FIFOs,4: This design supports four result FIFOs,?..." bitfld.long 0x00 11. "NUM_SEC,Number of Single Ended Outputs Supported" "0: This design supports one single ended..,1: This design supports two simultanious single.." newline bitfld.long 0x00 10. "CALOFSI,Calibration Function Implemented" "0: Calibration Not Implemented,1: Calibration Implemented" bitfld.long 0x00 9. "IADCKI,Internal ADC Clock implemented" "0: Internal clock source not implemented,1: Internal clock source (and CFG[ADCKEN]).." newline bitfld.long 0x00 8. "VR1RNGI,Voltage Reference 1 Range Control Bit Implemented" "0: Range control not required,1: Range control required" bitfld.long 0x00 4.--6. "CSW,Channel Scale Width" "0: Channel scaling not supported,1: Channel scaling supported,?,?,?,?,6: Channel scaling supported,?..." newline bitfld.long 0x00 3. "MVI,Multi Vref Implemented" "0: Single voltage reference high (VREFH) input..,1: Multiple voltage reference high (VREFH).." bitfld.long 0x00 1. "DIFFEN,Differential Supported" "0: Differential operation not supported,1: Differential operation supported" newline bitfld.long 0x00 0. "RES,Resolution" "0: Up to 13-bit differential/12-bit single ended..,1: Up to 16-bit differential/15-bit single ended.." rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "CMD_NUM,Command Buffer Number" hexmask.long.byte 0x00 16.--23. 1. "CV_NUM,Compare Value Number" newline hexmask.long.byte 0x00 8.--15. 1. "FIFOSIZE,Result FIFO Depth" hexmask.long.byte 0x00 0.--7. 1. "TRIG_NUM,Trigger Number" group.long 0x10++0x03 line.long 0x00 "CTRL,ADC Control Register" bitfld.long 0x00 8. "RSTFIFO0,Reset FIFO 0" "0: RSTFIFO0_0,1: FIFO 0 is reset" bitfld.long 0x00 2. "DOZEN,Doze Enable" "0: ADC is enabled in Doze mode,1: ADC is disabled in Doze mode" newline bitfld.long 0x00 1. "RST,Software Reset" "0: ADC logic is not reset,1: ADC logic is reset" bitfld.long 0x00 0. "ADCEN,ADC Enable" "0: ADC is disabled,1: ADC is enabled" group.long 0x14++0x03 line.long 0x00 "STAT,ADC Status Register" rbitfld.long 0x00 24.--27. "CMDACT,Command Active" "0: No command is currently in progress,1: Command 1 currently being executed,2: Command 2 currently being executed,3: Associated command number is currently being..,4: Associated command number is currently being..,5: Associated command number is currently being..,6: Associated command number is currently being..,7: Associated command number is currently being..,8: Associated command number is currently being..,9: Associated command number is currently being..,?..." rbitfld.long 0x00 16.--17. "TRGACT,Trigger Active" "0: Command (sequence) associated with Trigger 0..,1: Command (sequence) associated with Trigger 1..,2: Command (sequence) associated with Trigger 2..,3: Command (sequence) associated with Trigger 3.." newline rbitfld.long 0x00 11. "ADC_ACTIVE,ADC Active" "0: The ADC is IDLE,1: The ADC is processing a conversion running.." eventfld.long 0x00 9. "TCOMP_INT,Interrupt Flag For Trigger Completion" "0: Either IE[TCOMP_IE] is set to 0 or no trigger..,1: Trigger sequence has been completed and all.." newline eventfld.long 0x00 8. "TEXC_INT,Interrupt Flag For High Priority Trigger Exception" "0: No trigger exceptions have occurred,1: A trigger exception has occurred and is.." eventfld.long 0x00 1. "FOF0,Result FIFO 0 Overflow Flag" "0: No result FIFO 0 overflow has occurred since..,1: At least one result FIFO 0 overflow has.." newline rbitfld.long 0x00 0. "RDY0,Result FIFO 0 Ready Flag" "0: Result FIFO 0 data level not above watermark..,1: Result FIFO 0 holding data above watermark.." group.long 0x18++0x03 line.long 0x00 "IE,Interrupt Enable Register" bitfld.long 0x00 16.--19. "TCOMP_IE,Trigger Completion Interrupt Enable" "0: Trigger completion interrupts are disabled,1: Trigger completion interrupts are enabled for..,2: Trigger completion interrupts are enabled for..,3: Associated trigger completion interrupts are..,4: Associated trigger completion interrupts are..,5: Associated trigger completion interrupts are..,6: Associated trigger completion interrupts are..,7: Associated trigger completion interrupts are..,8: Associated trigger completion interrupts are..,9: Associated trigger completion interrupts are..,?,?,?,?,?,15: Trigger completion interrupts are enabled.." bitfld.long 0x00 8. "TEXC_IE,Trigger Exception Interrupt Enable" "0: Trigger exception interrupts are disabled,1: Trigger exception interrupts are enabled" newline bitfld.long 0x00 1. "FOFIE0,Result FIFO 0 Overflow Interrupt Enable" "0: FIFO 0 overflow interrupts are not enabled,1: FIFO 0 overflow interrupts are enabled" bitfld.long 0x00 0. "FWMIE0,FIFO 0 Watermark Interrupt Enable" "0: FIFO 0 watermark interrupts are not enabled,1: FIFO 0 watermark interrupts are enabled" group.long 0x1C++0x03 line.long 0x00 "DE,DMA Enable Register" bitfld.long 0x00 0. "FWMDE0,FIFO 0 Watermark DMA Enable" "0: DMA request disabled,1: DMA request enabled" group.long 0x20++0x03 line.long 0x00 "CFG,ADC Configuration Register" bitfld.long 0x00 28. "PWREN,ADC Analog Pre-Enable" "0: ADC analog circuits are only enabled while..,1: ADC analog circuits are pre-enabled and ready.." hexmask.long.byte 0x00 16.--23. 1. "PUDLY,Power Up Delay" newline bitfld.long 0x00 10. "HPT_EXDI,High Priority Trigger Exception Disable" "0: High priority trigger exceptions are enabled,1: High priority trigger exceptions are disabled" bitfld.long 0x00 9. "TCMDRES,Trigger Command Resume" "0: Trigger sequences interrupted by a high..,1: Trigger sequences interrupted by a high.." newline bitfld.long 0x00 8. "TRES,Trigger Resume Enable" "0: Trigger sequences interrupted by a high..,1: Trigger sequences interrupted by a high.." bitfld.long 0x00 6.--7. "REFSEL,Voltage Reference Selection" "0: (Default) Option 1 setting,1: Option 2 setting,2: Option 3 setting,?..." newline bitfld.long 0x00 4.--5. "PWRSEL,Power Configuration Select" "0: Lowest power setting,1: Higher power setting than 0b0,2: Higher power setting than 0b1,3: Highest power setting" bitfld.long 0x00 0.--1. "TPRICTRL,ADC trigger priority control" "0: If a higher priority trigger is detected..,1: If a higher priority trigger is received..,2: If a higher priority trigger is received..,?..." group.long 0x24++0x03 line.long 0x00 "PAUSE,ADC Pause Register" bitfld.long 0x00 31. "PAUSEEN,PAUSE Option Enable" "0: Pause operation disabled,1: Pause operation enabled" hexmask.long.word 0x00 0.--8. 1. "PAUSEDLY,Pause Delay" group.long 0x34++0x03 line.long 0x00 "SWTRIG,Software Trigger Register" bitfld.long 0x00 3. "SWT3,Software trigger 3 event" "0: No trigger 3 event generated,1: Trigger 3 event generated" bitfld.long 0x00 2. "SWT2,Software trigger 2 event" "0: No trigger 2 event generated,1: Trigger 2 event generated" newline bitfld.long 0x00 1. "SWT1,Software trigger 1 event" "0: No trigger 1 event generated,1: Trigger 1 event generated" bitfld.long 0x00 0. "SWT0,Software trigger 0 event" "0: No trigger 0 event generated,1: Trigger 0 event generated" group.long 0x38++0x03 line.long 0x00 "TSTAT,Trigger Status Register" eventfld.long 0x00 16.--19. "TCOMP_FLAG,Trigger Completion Flag" "0: No triggers have been completed,1: Trigger 0 has been completed and triger 0 has..,2: Trigger 1 has been completed and triger 1 has..,3: Associated trigger sequence has completed and..,4: Associated trigger sequence has completed and..,5: Associated trigger sequence has completed and..,6: Associated trigger sequence has completed and..,7: Associated trigger sequence has completed and..,8: Associated trigger sequence has completed and..,9: Associated trigger sequence has completed and..,?,?,?,?,?,15: Every trigger sequence has been completed.." eventfld.long 0x00 0.--3. "TEXC_NUM,Trigger Exception Number" "0: No triggers have been interrupted by a high..,1: Trigger 0 has been interrupted by a high..,2: Trigger 1 has been interrupted by a high..,3: Associated trigger sequence has interrupted..,4: Associated trigger sequence has interrupted..,5: Associated trigger sequence has interrupted..,6: Associated trigger sequence has interrupted..,7: Associated trigger sequence has interrupted..,8: Associated trigger sequence has interrupted..,9: Associated trigger sequence has interrupted..,?,?,?,?,?,15: Every trigger sequence has been interrupted.." repeat 4. (increment 0 1) (increment 0 0x4) group.long ($2+0xA0)++0x03 line.long 0x00 "TCTRL[$1],Trigger Control Register $1" bitfld.long 0x00 24.--27. "TCMD,Trigger command select" "0: Not a valid selection from the command buffer,1: CMD1 is executed,2: Corresponding CMD is executed,3: Corresponding CMD is executed,4: Corresponding CMD is executed,5: Corresponding CMD is executed,6: Corresponding CMD is executed,7: Corresponding CMD is executed,8: Corresponding CMD is executed,9: Corresponding CMD is executed,?,?,?,?,?,15: CMD15 is executed" bitfld.long 0x00 16.--19. "TDLY,Trigger delay select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--9. "TPRI,Trigger priority setting" "0: Set to highest priority Level 1,1: Set to corresponding priority level,2: Set to corresponding priority level,3: Set to lowest priority Level 4" bitfld.long 0x00 0. "HTEN,Trigger enable" "0: Hardware trigger source disabled,1: Hardware trigger source enabled" repeat.end group.long 0xE0++0x03 line.long 0x00 "FCTRL0,FIFO Control Register" bitfld.long 0x00 16.--19. "FWMARK,Watermark level selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rbitfld.long 0x00 0.--4. "FCOUNT,Result FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x100++0x03 line.long 0x00 "CMDL1,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x104++0x03 line.long 0x00 "CMDH1,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." newline bitfld.long 0x00 0.--1. "CMPEN,Compare Function Enable" "0: Compare disabled,?,2: Compare enabled,3: Compare enabled" group.long 0x108++0x03 line.long 0x00 "CMDL2,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x10C++0x03 line.long 0x00 "CMDH2,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." newline bitfld.long 0x00 0.--1. "CMPEN,Compare Function Enable" "0: Compare disabled,?,2: Compare enabled,3: Compare enabled" group.long 0x110++0x03 line.long 0x00 "CMDL3,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x114++0x03 line.long 0x00 "CMDH3,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." newline bitfld.long 0x00 0.--1. "CMPEN,Compare Function Enable" "0: Compare disabled,?,2: Compare enabled,3: Compare enabled" group.long 0x118++0x03 line.long 0x00 "CMDL4,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x11C++0x03 line.long 0x00 "CMDH4,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." newline bitfld.long 0x00 0.--1. "CMPEN,Compare Function Enable" "0: Compare disabled,?,2: Compare enabled,3: Compare enabled" group.long 0x120++0x03 line.long 0x00 "CMDL5,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x124++0x03 line.long 0x00 "CMDH5,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x128++0x03 line.long 0x00 "CMDL6,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x12C++0x03 line.long 0x00 "CMDH6,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x130++0x03 line.long 0x00 "CMDL7,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x134++0x03 line.long 0x00 "CMDH7,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x138++0x03 line.long 0x00 "CMDL8,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x13C++0x03 line.long 0x00 "CMDH8,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x140++0x03 line.long 0x00 "CMDL9,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x144++0x03 line.long 0x00 "CMDH9,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x148++0x03 line.long 0x00 "CMDL10,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x14C++0x03 line.long 0x00 "CMDH10,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x150++0x03 line.long 0x00 "CMDL11,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x154++0x03 line.long 0x00 "CMDH11,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x158++0x03 line.long 0x00 "CMDL12,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x15C++0x03 line.long 0x00 "CMDH12,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x160++0x03 line.long 0x00 "CMDL13,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x164++0x03 line.long 0x00 "CMDH13,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x168++0x03 line.long 0x00 "CMDL14,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x16C++0x03 line.long 0x00 "CMDH14,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." group.long 0x170++0x03 line.long 0x00 "CMDL15,ADC Command Low Buffer Register" bitfld.long 0x00 13. "CSCALE,Channel Scale" "0: Scale selected analog channel (Factor of 30/64),1: (Default) Full scale (Factor of 1)" bitfld.long 0x00 6. "DIFF,Differential Mode Enable" "0: Single-ended mode,1: Differential mode" newline bitfld.long 0x00 5. "ABSEL,A-side vs" "0: When DIFF=0b0 the associated A-side channel..,1: When DIFF=0b0 the associated B-side channel.." bitfld.long 0x00 0.--4. "ADCH,Input channel select" "0: Select CH0A or CH0B or CH0A/CH0B pair,1: Select CH1A or CH1B or CH1A/CH1B pair,2: Select CH2A or CH2B or CH2A/CH2B pair,3: Select CH3A or CH3B or CH3A/CH3B pair,4: Select corresponding channel CHnA or CHnB or..,5: Select corresponding channel CHnA or CHnB or..,6: Select corresponding channel CHnA or CHnB or..,7: Select corresponding channel CHnA or CHnB or..,8: Select corresponding channel CHnA or CHnB or..,9: Select corresponding channel CHnA or CHnB or..,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,30: Select CH30A or CH30B or CH30A/CH30B pair,31: Select CH31A or CH31B or CH31A/CH31B pair" group.long 0x174++0x03 line.long 0x00 "CMDH15,ADC Command High Buffer Register" bitfld.long 0x00 24.--27. "NEXT,Next Command Select" "0: No next command defined,1: Select CMD1 command buffer register as next..,2: Select corresponding CMD command buffer..,3: Select corresponding CMD command buffer..,4: Select corresponding CMD command buffer..,5: Select corresponding CMD command buffer..,6: Select corresponding CMD command buffer..,7: Select corresponding CMD command buffer..,8: Select corresponding CMD command buffer..,9: Select corresponding CMD command buffer..,?,?,?,?,?,15: Select CMD15 command buffer register as next.." bitfld.long 0x00 16.--19. "LOOP,Loop Count Select" "0: Looping not enabled,1: Loop 1 time,2: Loop 2 times,3: Loop corresponding number of times,4: Loop corresponding number of times,5: Loop corresponding number of times,6: Loop corresponding number of times,7: Loop corresponding number of times,8: Loop corresponding number of times,9: Loop corresponding number of times,?,?,?,?,?,15: Loop 15 times" newline bitfld.long 0x00 12.--14. "AVGS,Hardware Average Select" "0: Single conversion,1: 2 conversions averaged,2: 4 conversions averaged,3: 8 conversions averaged,4: 16 conversions averaged,5: 32 conversions averaged,6: 64 conversions averaged,7: 128 conversions averaged" bitfld.long 0x00 8.--10. "STS,Sample Time Select" "0: Minimum sample time of 3 ADCK cycles,1: 3 + 21 ADCK cycles 5 ADCK cycles total sample..,2: 3 + 22 ADCK cycles 7 ADCK cycles total sample..,3: 3 + 23 ADCK cycles 11 ADCK cycles total..,4: 3 + 24 ADCK cycles 19 ADCK cycles total..,5: 3 + 25 ADCK cycles 35 ADCK cycles total..,6: 3 + 26 ADCK cycles 67 ADCK cycles total..,7: 3 + 27 ADCK cycles 131 ADCK cycles total.." newline bitfld.long 0x00 7. "LWI,Loop with Increment" "0: Auto channel increment disabled,1: Auto channel increment enabled" bitfld.long 0x00 2. "WAIT_TRIG,Wait for trigger assertion before execution" "0: This command will be automatically executed,1: The active trigger must be asserted again.." repeat 4. (strings "1" "2" "3" "4" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x200)++0x03 line.long 0x00 "CV$1,Compare Value Register" hexmask.long.word 0x00 16.--31. 1. "CVH,Compare Value High" hexmask.long.word 0x00 0.--15. 1. "CVL,Compare Value Low" repeat.end rgroup.long 0x300++0x03 line.long 0x00 "RESFIFO0,ADC Data Result FIFO Register" bitfld.long 0x00 31. "VALID,FIFO entry is valid" "0: FIFO is empty,1: FIFO record read from RESFIFO is valid" bitfld.long 0x00 24.--27. "CMDSRC,Command Buffer Source" "0: Not a valid value CMDSRC value for a dataword..,1: CMD1 buffer used as control settings for this..,2: Corresponding command buffer used as control..,3: Corresponding command buffer used as control..,4: Corresponding command buffer used as control..,5: Corresponding command buffer used as control..,6: Corresponding command buffer used as control..,7: Corresponding command buffer used as control..,8: Corresponding command buffer used as control..,9: Corresponding command buffer used as control..,?,?,?,?,?,15: CMD15 buffer used as control settings for.." newline bitfld.long 0x00 20.--23. "LOOPCNT,Loop count value" "0: Result is from initial conversion in command,1: Result is from second conversion in command,2: Result is from LOOPCNT+1 conversion in command,3: Result is from LOOPCNT+1 conversion in command,4: Result is from LOOPCNT+1 conversion in command,5: Result is from LOOPCNT+1 conversion in command,6: Result is from LOOPCNT+1 conversion in command,7: Result is from LOOPCNT+1 conversion in command,8: Result is from LOOPCNT+1 conversion in command,9: Result is from LOOPCNT+1 conversion in command,?,?,?,?,?,15: Result is from 16th conversion in command" bitfld.long 0x00 16.--17. "TSRC,Trigger Source" "0: Trigger source 0 initiated this conversion,1: Trigger source 1 initiated this conversion,2: Corresponding trigger source initiated this..,3: Trigger source 3 initiated this conversion" newline hexmask.long.word 0x00 0.--15. 1. "D,Data result" tree.end repeat.end tree.end tree "AHB_ADDR_REMAP" repeat 2. (list 0. 1.) (list ad:0x28039800 ad:0x29810800) tree "ADDR_REMAP$1" base $2 wgroup.long 0x800++0x03 line.long 0x00 "CR,Control" hexmask.long.tbyte 0x00 7.--27. 1. "RADDR,Remap address" bitfld.long 0x00 3. "LK,Sticky lock bit" "0,1" newline bitfld.long 0x00 2. "INV,Invalidate Tag register" "0,1" bitfld.long 0x00 0. "ENB,Enable Remap" "0: The module is disabled and all input AHB..,1: All AHB addresses from the designed bus.." rgroup.long 0x804++0x03 line.long 0x00 "SR,Status tag" hexmask.long.tbyte 0x00 7.--27. 1. "RADDR,Remap address" bitfld.long 0x00 3. "LK,Sticky lock bit" "0,1" newline bitfld.long 0x00 2. "INV,Invalidate Tag register" "0,1" bitfld.long 0x00 0. "ENB,Enable Remap" "0: The module is disabled and all input AHB..,1: All AHB addresses from the designed bus.." rgroup.long 0x808++0x03 line.long 0x00 "TAG,Virtual tag" hexmask.long 0x00 7.--31. 1. "VADDR,This bit indicates the virtual address" bitfld.long 0x00 0. "VLD,This bit indicates the validity of the entry" "0: Disabled,1: Enabled" rgroup.long 0x80C++0x03 line.long 0x00 "DATA,Physical Address Data" bitfld.long 0x00 28.--31. "VADDRH,This bit indicates the high portion of the virtual address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.tbyte 0x00 7.--27. 1. "PADDR,This bit indicates the physical address" newline hexmask.long.byte 0x00 0.--6. 1. "VADDRL,This bit indicates the low portion of the virtual address" tree.end repeat.end tree.end tree "AXBS" repeat 2. (list 0. 1.) (list ad:0x28000000 ad:0x29000000) tree "AXBS$1" base $2 group.long 0x00++0x03 line.long 0x00 "PRS0,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x10++0x03 line.long 0x00 "CRS0,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x100++0x03 line.long 0x00 "PRS1,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x110++0x03 line.long 0x00 "CRS1,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x200++0x03 line.long 0x00 "PRS2,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x210++0x03 line.long 0x00 "CRS2,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x300++0x03 line.long 0x00 "PRS3,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x310++0x03 line.long 0x00 "CRS3,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x400++0x03 line.long 0x00 "PRS4,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x410++0x03 line.long 0x00 "CRS4,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x500++0x03 line.long 0x00 "PRS5,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x510++0x03 line.long 0x00 "CRS5,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x600++0x03 line.long 0x00 "PRS6,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x610++0x03 line.long 0x00 "CRS6,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" group.long 0x700++0x03 line.long 0x00 "PRS7,Priority Slave Registers" bitfld.long 0x00 28.--30. "M7,Master 7 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 24.--26. "M6,Master 6 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 20.--22. "M5,Master 5 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 16.--18. "M4,Master 4 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 12.--14. "M3,Master 3 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 8.--10. "M2,Master 2 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." newline bitfld.long 0x00 4.--6. "M1,Master 1 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." bitfld.long 0x00 0.--2. "M0,Master 0 Priority" "0: This master has level 1 or highest priority..,1: This master has level 2 priority when..,2: This master has level 3 priority when..,3: This master has level 4 priority when..,4: This master has level 5 priority when..,5: This master has level 6 priority when..,6: This master has level 7 priority when..,7: This master has level 8 or lowest priority.." group.long 0x710++0x03 line.long 0x00 "CRS7,Control Register" bitfld.long 0x00 31. "RO,Read Only" "0: The CRSn and PRSn registers are writeable,1: The CRSn and PRSn registers are read-only and.." bitfld.long 0x00 30. "HLP,Halt Low Priority" "0: The low-power mode request has the highest..,1: The low-power mode request has the lowest.." newline bitfld.long 0x00 23. "HPE7,High Priority Elevation 7" "0: Master high-priority elevation for master 7,1: Master high-priority elevation for master 7" bitfld.long 0x00 22. "HPE6,High Priority Elevation 6" "0: Master high-priority elevation for master 6,1: Master high-priority elevation for master 6" newline bitfld.long 0x00 21. "HPE5,High Priority Elevation 5" "0: Master high-priority elevation for master 5,1: Master high-priority elevation for master 5" bitfld.long 0x00 20. "HPE4,High Priority Elevation 4" "0: Master high-priority elevation for master 4,1: Master high-priority elevation for master 4" newline bitfld.long 0x00 19. "HPE3,High Priority Elevation 3" "0: Master high-priority elevation for master 3,1: Master high-priority elevation for master 3" bitfld.long 0x00 18. "HPE2,High Priority Elevation 2" "0: Master high-priority elevation for master 2,1: Master high-priority elevation for master 2" newline bitfld.long 0x00 17. "HPE1,High Priority Elevation 1" "0: Master high-priority elevation for master 1,1: Master high-priority elevation for master 1" bitfld.long 0x00 16. "HPE0,High Priority Elevation 0" "0: Master high-priority elevation for master 0,1: Master high-priority elevation for master 0" newline bitfld.long 0x00 8.--9. "ARB,Arbitration Mode" "0: Fixed priority,1: Round-robin (rotating) priority,?..." bitfld.long 0x00 4.--5. "PCTL,Parking Control" "0: When no master makes a request the arbiter..,1: When no master makes a request the arbiter..,2: Low-power park,?..." newline bitfld.long 0x00 0.--2. "PARK,Park" "0: Park on master port M0,1: Park on master port M1,2: Park on master port M2,3: Park on master port M3,4: Park on master port M4,5: Park on master port M5,6: Park on master port M6,7: Park on master port M7" tree.end repeat.end tree.end tree "BBNSM" base ad:0x28038000 rgroup.long 0x00++0x03 line.long 0x00 "BBNSM_VID,BBNSM Version ID Register" hexmask.long.byte 0x00 16.--23. 1. "BBNSM_VID,BBNSM Version ID" hexmask.long.byte 0x00 8.--15. 1. "BBNSM_REV,BBNSM Revision" newline hexmask.long.byte 0x00 0.--7. 1. "BBNSM_IPID,BBNSM IP ID" rgroup.long 0x04++0x03 line.long 0x00 "BBNSM_FEATURES,BBNSM Features Register" bitfld.long 0x00 2.--7. "GPR_SZ,GPR Register Array Size" "0: This version of BBNSM does not implement a..,?..." group.long 0x08++0x03 line.long 0x00 "BBNSM_CTRL,BBNSM Control Register" bitfld.long 0x00 25. "TOSP,Turn Off System Power" "0: Leave system power on,1: Turn off system power when Dumb PMIC is enabled" bitfld.long 0x00 24. "DP_EN,Dumb PMIC Enable" "0: Smart PMIC is enabled,1: Dumb PMIC is enabled" newline bitfld.long 0x00 23. "PK_OVR,PMIC On Request Override" "0,1" bitfld.long 0x00 22. "PK_EN,PMIC On Request Enable" "0,1" newline bitfld.long 0x00 20.--21. "TURN_ON_TIME,Turn-On Time" "0: 500 milliseconds,1: 50 milliseconds,2: 100 milliseconds,3: 0 milliseconds" bitfld.long 0x00 18.--19. "DEBOUNCE,Debounce Time" "0: 50 milliseconds,1: 100 milliseconds,2: 500 milliseconds,3: 0 milliseconds" newline bitfld.long 0x00 16.--17. "BTN_TIMEOUT,Button Press Timeout" "0: 5 seconds,1: 10 seconds,2: 15 seconds,3: Timeout disabled" bitfld.long 0x00 8.--12. "CAL_VAL,Calibration Value" "0: +0 counts per each 32768 ticks of the counter..,1: +1 counts per each 32768 ticks of the counter..,2: +2 counts per each 32768 ticks of the counter..,?,?,?,?,?,?,?,?,?,?,?,?,15: +15 counts per each 32768 ticks of the..,16: -16 counts per each 32768 ticks of the..,17: -15 counts per each 32768 ticks of the..,?,?,?,?,?,?,?,?,?,?,?,?,30: -2 counts per each 32768 ticks of the..,31: -1 counts per each 32768 ticks of the.." newline bitfld.long 0x00 4. "CAL_EN,Calibration Enable" "0: RTC Time calibration is disabled,1: RTC Time calibration is enabled" bitfld.long 0x00 2.--3. "TA_EN,Time Alarm Enable" "?,1: Disable the time alarm,2: Enable the time alarm,?..." newline bitfld.long 0x00 0.--1. "RTC_EN,Real-Time Counter Enable" "?,1: Disable the real-time counter,2: Enable the real-time counter,?..." group.long 0x10++0x03 line.long 0x00 "BBNSM_INT_EN,BBNSM Interrupt Enable Register" bitfld.long 0x00 2.--3. "TA_INT_EN,Time Alarm Interrupt Enable" "?,1: Do not issue an interrupt when RTC has rolled..,2: Issue an interrupt when RTC has rolled over,?..." bitfld.long 0x00 0.--1. "RTC_INT_EN,Real-Time Counter Rollover Interrupt Enable" "?,1: Do not issue an interrupt when RTC has rolled..,2: Issue an interrupt when RTC has rolled over,?..." group.long 0x14++0x03 line.long 0x00 "BBNSM_EVENTS,BBNSM Events Register" eventfld.long 0x00 6. "PWR_ON,Set Power On Event" "0: The set_pwr_on_irq interrupt has not been..,1: The set_pwr_on_irq interrupt has been requested" eventfld.long 0x00 5. "PWR_OFF,Set Power Off Event" "0: The set_pwr_off_irq interrupt has not been..,1: The set_pwr_off_irq interrupt has been.." newline eventfld.long 0x00 4. "EMG_OFF,Emergency Off Event" "0: An emergency power off has not been requested,1: An emergency power off has been requested" eventfld.long 0x00 2.--3. "TA,Time Alarm Event" "?,1: The real-time counter has not reached the..,2: The real-time counter has reached the alarm..,?..." newline eventfld.long 0x00 0.--1. "RTC_ROLL,Real-Time Counter Rollover Event" "?,1: The real-time counter has not rolled over,2: The real-time counter has rolled over,?..." group.long 0x24++0x03 line.long 0x00 "BBNSM_PAD_CTRL,BBNSM External Pad Control Register" bitfld.long 0x00 0. "PAD_CTRL0,Control I/O Pads" "0: SoC specified pad control data,1: SoC specified pad control data" group.long 0x40++0x03 line.long 0x00 "BBNSM_RTC_LS,BBNSM Real-Time Counter LS Register" hexmask.long 0x00 0.--31. 1. "RTC,Real-time Counter" group.long 0x44++0x03 line.long 0x00 "BBNSM_RTC_MS,BBNSM Real-Time Counter MS Register" hexmask.long.word 0x00 0.--14. 1. "RTC,Real-Time Counter" group.long 0x50++0x03 line.long 0x00 "BBNSM_TA,BBNSM Time Alarm Register" hexmask.long 0x00 0.--31. 1. "TA,Time Alarm Value" repeat 16. (increment 0 1) (increment 0 0x04) group.long ($2+0x300)++0x03 line.long 0x00 "GPR[$1],General Purpose Register Word word $1" hexmask.long 0x00 0.--31. 1. "GPR,32 bits of the GPR" repeat.end tree.end tree "CAC (XCACHE)" repeat 2. (list 0. 1.) (list ad:0x28046000 ad:0x28046800) tree "CACHE64_CTRL$1" base $2 group.long 0x00++0x03 line.long 0x00 "CCR,Cache control register" bitfld.long 0x00 31. "GO,Initiate Cache Command" "0: Write: no effect,1: Write: initiate command indicated by bits 27-24" bitfld.long 0x00 27. "PUSHW1,Push Way 1" "0: no_operation,1: When setting the GO bit push all modified.." newline bitfld.long 0x00 26. "INVW1,Invalidate Way 1" "0: no_operation,1: When setting the GO bit invalidate all lines.." bitfld.long 0x00 25. "PUSHW0,Push Way 0" "0: no_operation,1: When setting the GO bit push all modified.." newline bitfld.long 0x00 24. "INVW0,Invalidate Way 0" "0: no_operation,1: When setting the GO bit invalidate all lines.." bitfld.long 0x00 1. "ENWRBUF,Enable Write Buffer" "0: Write buffer disabled,1: Write buffer enabled" newline bitfld.long 0x00 0. "ENCACHE,Cache enable" "0: Cache disabled,1: Cache enabled" group.long 0x04++0x03 line.long 0x00 "CLCR,Cache line control register" bitfld.long 0x00 27. "LACC,Line access type" "0: read,1: write" bitfld.long 0x00 26. "LADSEL,Line Address Select" "0: Cache address,1: Physical address" newline bitfld.long 0x00 24.--25. "LCMD,Line Command" "0: Search and read or write,1: invalidate,2: push,3: clear" bitfld.long 0x00 22. "LCWAY,Line Command Way" "0,1" newline bitfld.long 0x00 21. "LCIMB,Line Command Initial Modified Bit" "0,1" bitfld.long 0x00 20. "LCIVB,Line Command Initial Valid Bit" "0,1" newline bitfld.long 0x00 16. "TDSEL,Tag/Data Select" "0: data,1: tag" bitfld.long 0x00 14. "WSEL,Way select" "0: Way 0,1: Way 1" newline hexmask.long.word 0x00 2.--13. 1. "CACHEADDR,Cache address" bitfld.long 0x00 0. "LGO,Initiate Cache Line Command" "0: Write: no effect,1: Write: initiate line command indicated by.." group.long 0x08++0x03 line.long 0x00 "CSAR,Cache search address register" hexmask.long 0x00 2.--31. 1. "PHYADDR,Physical Address" bitfld.long 0x00 0. "LGO,Initiate Cache Line Command" "0: Write: no effect,1: Write: initiate line command indicated by.." group.long 0x0C++0x03 line.long 0x00 "CCVR,Cache read/write value register" hexmask.long 0x00 0.--31. 1. "DATA,Cache read/write Data" tree.end repeat.end tree.end tree "CAN" base ad:0x280A8000 sif cpuis("IMX8UD3-CM33") group.long 0x00++0x03 line.long 0x00 "MCR,Module Configuration Register" bitfld.long 0x00 31. "MDIS,Module Disable" "0: Enable the FlexCAN module,1: Disable the FlexCAN module" bitfld.long 0x00 30. "FRZ,Freeze Enable" "0: Not enabled to enter Freeze mode,1: Enabled to enter Freeze mode" newline bitfld.long 0x00 29. "RFEN,Legacy Rx FIFO Enable" "0: Legacy Rx FIFO not enabled,1: Legacy Rx FIFO enabled" bitfld.long 0x00 28. "HALT,Halt FlexCAN" "0: No Freeze mode request,1: Enters Freeze mode if the FRZ bit is asserted" newline rbitfld.long 0x00 27. "NOTRDY,FlexCAN Not Ready" "0: FlexCAN module is either in Normal mode..,1: FlexCAN module is either in Disable mode Doze.." bitfld.long 0x00 26. "WAKMSK,Wake Up Interrupt Mask" "0: Wake Up interrupt is disabled,1: Wake Up interrupt is enabled" newline bitfld.long 0x00 25. "SOFTRST,Soft Reset" "0: SOFTRST_no_reset_request,1: Resets the registers affected by soft reset" rbitfld.long 0x00 24. "FRZACK,Freeze Mode Acknowledge" "0: FlexCAN not in Freeze mode prescaler running,1: FlexCAN in Freeze mode prescaler stopped" newline bitfld.long 0x00 23. "SUPV,Supervisor Mode" "0: FlexCAN is in User mode,1: FlexCAN is in Supervisor mode" bitfld.long 0x00 22. "SLFWAK,Self Wake Up" "0: FlexCAN Self Wake Up feature is disabled,1: FlexCAN Self Wake Up feature is enabled" newline bitfld.long 0x00 21. "WRNEN,Warning Interrupt Enable" "0: TWRNINT and RWRNINT bits are zero independent..,1: TWRNINT and RWRNINT bits are set when the.." rbitfld.long 0x00 20. "LPMACK,Low-Power Mode Acknowledge" "0: FlexCAN is not in a low-power mode,1: FlexCAN is in a low-power mode" newline bitfld.long 0x00 19. "WAKSRC,Wake Up Source" "0: FlexCAN uses the unfiltered Rx input to..,1: FlexCAN uses the filtered Rx input to detect.." bitfld.long 0x00 18. "DOZE,Doze Mode Enable" "0: FlexCAN is not enabled to enter low-power..,1: FlexCAN is enabled to enter low-power mode.." newline bitfld.long 0x00 17. "SRXDIS,Self Reception Disable" "0: Self-reception enabled,1: Self-reception disabled" bitfld.long 0x00 16. "IRMQ,Individual Rx Masking And Queue Enable" "0: Individual Rx masking and queue feature are..,1: Individual Rx masking and queue feature are.." newline bitfld.long 0x00 15. "DMA,DMA Enable" "0: DMA feature for Legacy RX FIFO or Enhanced Rx..,1: DMA feature for Legacy RX FIFO or Enhanced Rx.." bitfld.long 0x00 14. "PNET_EN,Pretended Networking Enable" "0: Pretended Networking mode is disabled,1: Pretended Networking mode is enabled" newline bitfld.long 0x00 13. "LPRIOEN,Local Priority Enable" "0: Local Priority disabled,1: Local Priority enabled" bitfld.long 0x00 12. "AEN,Abort Enable" "0: Abort disabled,1: Abort enabled" newline bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "0: CAN FD is disabled,1: CAN FD is enabled" bitfld.long 0x00 8.--9. "IDAM,ID Acceptance Mode" "0: Format A,1: Format B,2: Format C,3: Format D" newline hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number Of The Last Message Buffer" group.long 0x04++0x03 line.long 0x00 "CTRL1,Control 1 Register" hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler Division Factor" bitfld.long 0x00 22.--23. "RJW,Resync Jump Width" "0,1,2,3" newline bitfld.long 0x00 19.--21. "PSEG1,Phase Segment 1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. "PSEG2,Phase Segment 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 15. "BOFFMSK,Bus Off Interrupt Mask" "0: Bus Off interrupt disabled,1: Bus Off interrupt enabled" bitfld.long 0x00 14. "ERRMSK,Error Interrupt Mask" "0: Error interrupt disabled,1: Error interrupt enabled" newline bitfld.long 0x00 12. "LPB,Loop Back Mode" "0: Loop Back disabled,1: Loop Back enabled" bitfld.long 0x00 11. "TWRNMSK,Tx Warning Interrupt Mask" "0: Tx Warning interrupt disabled,1: Tx Warning interrupt enabled" newline bitfld.long 0x00 10. "RWRNMSK,Rx Warning Interrupt Mask" "0: Rx Warning interrupt disabled,1: Rx Warning interrupt enabled" bitfld.long 0x00 7. "SMP,CAN Bit Sampling" "0: Just one sample is used to determine the bit..,1: Three samples are used to determine the value.." newline bitfld.long 0x00 6. "BOFFREC,Bus Off Recovery" "0: Automatic recovering from Bus Off state enabled,1: Automatic recovering from Bus Off state.." bitfld.long 0x00 5. "TSYN,Timer Sync" "0: Timer sync feature disabled,1: Timer sync feature enabled" newline bitfld.long 0x00 4. "LBUF,Lowest Buffer Transmitted First" "0: Buffer with highest priority is transmitted..,1: Lowest number buffer is transmitted first" bitfld.long 0x00 3. "LOM,Listen-Only Mode" "0: Listen-Only mode is deactivated,1: FlexCAN module operates in Listen-Only mode" newline bitfld.long 0x00 0.--2. "PROPSEG,Propagation Segment" "0,1,2,3,4,5,6,7" group.long 0x08++0x03 line.long 0x00 "TIMER,Free Running Timer" hexmask.long.word 0x00 0.--15. 1. "TIMER,Timer Value" group.long 0x10++0x03 line.long 0x00 "RXMGMASK,Rx Mailboxes Global Mask Register" hexmask.long 0x00 0.--31. 1. "MG,Rx Mailboxes Global Mask Bits" group.long 0x14++0x03 line.long 0x00 "RX14MASK,Rx 14 Mask Register" hexmask.long 0x00 0.--31. 1. "RX14M,Rx Buffer 14 Mask Bits" group.long 0x18++0x03 line.long 0x00 "RX15MASK,Rx 15 Mask Register" hexmask.long 0x00 0.--31. 1. "RX15M,Rx Buffer 15 Mask Bits" group.long 0x1C++0x03 line.long 0x00 "ECR,Error Counter" hexmask.long.byte 0x00 24.--31. 1. "RXERRCNT_FAST,Receive Error Counter for fast bits" hexmask.long.byte 0x00 16.--23. 1. "TXERRCNT_FAST,Transmit Error Counter for fast bits" newline hexmask.long.byte 0x00 8.--15. 1. "RXERRCNT,Receive Error Counter" hexmask.long.byte 0x00 0.--7. 1. "TXERRCNT,Transmit Error Counter" group.long 0x20++0x03 line.long 0x00 "ESR1,Error and Status 1 Register" rbitfld.long 0x00 31. "BIT1ERR_FAST,Bit1 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence,1: At least one bit sent as recessive is.." rbitfld.long 0x00 30. "BIT0ERR_FAST,Bit0 Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence,1: At least one bit sent as dominant is received.." newline rbitfld.long 0x00 28. "CRCERR_FAST,Cyclic Redundancy Check Error in the CRC field of CAN FD frames with the BRS bit set" "0: No such occurrence,1: A CRC error occurred since last read of this.." rbitfld.long 0x00 27. "FRMERR_FAST,Form Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence,1: A form error occurred since last read of this.." newline rbitfld.long 0x00 26. "STFERR_FAST,Stuffing Error in the Data Phase of CAN FD frames with the BRS bit set" "0: No such occurrence,1: A stuffing error occurred since last read of.." eventfld.long 0x00 21. "ERROVR,Error Overrun" "0: Overrun has not occurred,1: Overrun has occurred" newline eventfld.long 0x00 20. "ERRINT_FAST,Error interrupt for errors detected in Data Phase of CAN FD frames with BRS bit set" "0: errors_data_phase_no,1: Indicates setting of any error bit detected.." eventfld.long 0x00 19. "BOFFDONEINT,Bus Off Done Interrupt" "0: No such occurrence,1: FlexCAN module has completed Bus Off process" newline rbitfld.long 0x00 18. "SYNCH,CAN Synchronization Status" "0: FlexCAN is not synchronized to the CAN bus,1: FlexCAN is synchronized to the CAN bus" eventfld.long 0x00 17. "TWRNINT,Tx Warning Interrupt Flag" "0: No such occurrence,1: The Tx error counter transitioned from less.." newline eventfld.long 0x00 16. "RWRNINT,Rx Warning Interrupt Flag" "0: No such occurrence,1: The Rx error counter transitioned from less.." rbitfld.long 0x00 15. "BIT1ERR,Bit1 Error" "0: No such occurrence,1: At least one bit sent as recessive is.." newline rbitfld.long 0x00 14. "BIT0ERR,Bit0 Error" "0: No such occurrence,1: At least one bit sent as dominant is received.." rbitfld.long 0x00 13. "ACKERR,Acknowledge Error" "0: No such occurrence,1: An ACK error occurred since last read of this.." newline rbitfld.long 0x00 12. "CRCERR,Cyclic Redundancy Check Error" "0: No such occurrence,1: A CRC error occurred since last read of this.." rbitfld.long 0x00 11. "FRMERR,Form Error" "0: No such occurrence,1: A Form Error occurred since last read of this.." newline rbitfld.long 0x00 10. "STFERR,Stuffing Error" "0: No such occurrence,1: A stuffing error occurred since last read of.." rbitfld.long 0x00 9. "TXWRN,TX Error Warning" "0: No such occurrence,1: TXERRCNT is greater than or equal to 96" newline rbitfld.long 0x00 8. "RXWRN,Rx Error Warning" "0: No such occurrence,1: RXERRCNT is greater than or equal to 96" rbitfld.long 0x00 7. "IDLE,IDLE" "0: No such occurrence,1: CAN bus is now IDLE" newline rbitfld.long 0x00 6. "TX,FlexCAN In Transmission" "0: FlexCAN is not transmitting a message,1: FlexCAN is transmitting a message" rbitfld.long 0x00 4.--5. "FLTCONF,Fault Confinement State" "0: error_active,1: error_passive,2: bus_off,3: bus_off" newline rbitfld.long 0x00 3. "RX,FlexCAN In Reception" "0: FlexCAN is not receiving a message,1: FlexCAN is receiving a message" eventfld.long 0x00 2. "BOFFINT,Bus Off Interrupt" "0: No such occurrence,1: FlexCAN module entered Bus Off state" newline eventfld.long 0x00 1. "ERRINT,Error Interrupt" "0: No such occurrence,1: Indicates setting of any error bit in the.." eventfld.long 0x00 0. "WAKINT,Wake-Up Interrupt" "0: No such occurrence,1: Indicates a recessive to dominant transition.." group.long 0x24++0x03 line.long 0x00 "IMASK2,Interrupt Masks 2 Register" hexmask.long 0x00 0.--31. 1. "BUF63TO32M,Buffer MBi Mask" group.long 0x28++0x03 line.long 0x00 "IMASK1,Interrupt Masks 1 Register" hexmask.long 0x00 0.--31. 1. "BUF31TO0M,Buffer MBi Mask" group.long 0x2C++0x03 line.long 0x00 "IFLAG2,Interrupt Flags 2 Register" hexmask.long 0x00 0.--31. 1. "BUF63TO32I,Buffer MBi Interrupt" group.long 0x30++0x03 line.long 0x00 "IFLAG1,Interrupt Flags 1 Register" hexmask.long.tbyte 0x00 8.--31. 1. "BUF31TO8I,Buffer MBi Interrupt" eventfld.long 0x00 7. "BUF7I,Buffer MB7 Interrupt Or Legacy Rx FIFO Overflow" "0: No occurrence of MB7 completing..,1: MB7 completed transmission/reception when.." newline eventfld.long 0x00 6. "BUF6I,Buffer MB6 Interrupt Or Legacy Rx FIFO Warning" "0: No occurrence of MB6 completing..,1: MB6 completed transmission/reception when.." eventfld.long 0x00 5. "BUF5I,Buffer MB5 Interrupt Or Frames available in Legacy Rx FIFO" "0: No occurrence of MB5 completing..,1: MB5 completed transmission/reception when.." newline eventfld.long 0x00 1.--4. "BUF4TO1I,Buffer MBi Interrupt Or Reserved" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" eventfld.long 0x00 0. "BUF0I,Buffer MB0 Interrupt Or Clear Legacy FIFO bit" "0: The corresponding buffer has no occurrence of..,1: The corresponding buffer has successfully.." group.long 0x34++0x03 line.long 0x00 "CTRL2,Control 2 Register" bitfld.long 0x00 31. "ERRMSK_FAST,Error Interrupt Mask for errors detected in the data phase of fast CAN FD frames" "0: ERRINT_FAST error interrupt disabled,1: ERRINT_FAST error interrupt enabled" bitfld.long 0x00 30. "BOFFDONEMSK,Bus Off Done Interrupt Mask" "0: Bus off done interrupt disabled,1: Bus off done interrupt enabled" newline bitfld.long 0x00 24.--27. "RFFN,Number Of Legacy Rx FIFO Filters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 19.--23. "TASD,Tx Arbitration Start Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 18. "MRP,Mailboxes Reception Priority" "0: Matching starts from Legacy Rx FIFO or..,1: Matching starts from mailboxes and continues.." bitfld.long 0x00 17. "RRS,Remote Request Storing" "0: remote_response_frame_not_generated,1: remote_response_frame_generated" newline bitfld.long 0x00 16. "EACEN,Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes" "0: Rx mailbox filter's IDE bit is always..,1: Enables the comparison of both Rx mailbox.." bitfld.long 0x00 15. "TIMER_SRC,Timer Source" "0: The free running timer is clocked by the CAN..,1: The free running timer is clocked by an.." newline bitfld.long 0x00 14. "PREXCEN,Protocol Exception Enable" "0: Protocol exception is disabled,1: Protocol exception is enabled" bitfld.long 0x00 13. "BTE,Bit Timing Expansion enable" "0: CAN Bit timing expansion is disabled,1: CAN bit timing expansion is enabled" newline bitfld.long 0x00 12. "ISOCANFDEN,ISO CAN FD Enable" "0: FlexCAN operates using the non-ISO CAN FD..,1: FlexCAN operates using the ISO CAN FD.." bitfld.long 0x00 11. "EDFLTDIS,Edge Filter Disable" "0: Edge filter is enabled,1: Edge filter is disabled" newline bitfld.long 0x00 8.--9. "MBTSBASE,Message Buffer Time Stamp Base" "0: Message buffer time stamp base is TIMER,1: Message buffer time stamp base is lower 16..,2: Message buffer time stamp base is upper 16..,?..." bitfld.long 0x00 6.--7. "TSTAMPCAP,Time Stamp Capture Point" "0: The high resolution time stamp capture is..,1: The high resolution time stamp is captured in..,2: The high resolution time stamp is captured in..,3: The high resolution time stamp is captured in.." rgroup.long 0x38++0x03 line.long 0x00 "ESR2,Error and Status 2 Register" hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest Priority Tx Mailbox" bitfld.long 0x00 14. "VPS,Valid Priority Status" "0: Contents of IMB and LPTM are invalid,1: Contents of IMB and LPTM are valid" newline bitfld.long 0x00 13. "IMB,Inactive Mailbox" "0: If ESR2[VPS] is asserted the ESR2[LPTM] is..,1: If ESR2[VPS] is asserted there is at least.." rgroup.long 0x44++0x03 line.long 0x00 "CRCR,CRC Register" hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC Mailbox" hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC value" group.long 0x48++0x03 line.long 0x00 "RXFGMASK,Legacy Rx FIFO Global Mask Register" hexmask.long 0x00 0.--31. 1. "FGM,Legacy Rx FIFO Global Mask Bits" rgroup.long 0x4C++0x03 line.long 0x00 "RXFIR,Legacy Rx FIFO Information Register" hexmask.long.word 0x00 0.--8. 1. "IDHIT,Identifier Acceptance Filter Hit Indicator" group.long 0x50++0x03 line.long 0x00 "CBT,CAN Bit Timing Register" bitfld.long 0x00 31. "BTF,Bit Timing Format Enable" "0: Extended bit time definitions disabled,1: Extended bit time definitions enabled" hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended Prescaler Division Factor" newline bitfld.long 0x00 16.--20. "ERJW,Extended Resync Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--15. "EPROPSEG,Extended Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 5.--9. "EPSEG1,Extended Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "EPSEG2,Extended Phase Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rgroup.long 0x58++0x03 line.long 0x00 "DBG1,Debug 1 Register" hexmask.long.word 0x00 16.--25. 1. "CBN,CAN Bit Number" hexmask.long.byte 0x00 0.--6. 1. "CFSM,CAN Finite State Machine" rgroup.long 0x5C++0x03 line.long 0x00 "DBG2,Debug 2 Register" bitfld.long 0x00 15. "APP,Arbitration Process in Progress" "0: No arbitration process ongoing,1: Arbitration process is in progress" hexmask.long.byte 0x00 8.--14. 1. "TAP,Tx Arbitration Pointer" newline bitfld.long 0x00 7. "MPP,Matching Process in Progress" "0: No matching process ongoing,1: Matching process is in progress" hexmask.long.byte 0x00 0.--6. 1. "RMP,Rx Matching Pointer" group.long 0x80++0x03 line.long 0x00 "CS0,Message Buffer 0 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x80++0x03 line.long 0x00 "MB0_16B_CS,Message Buffer 0 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x80++0x03 line.long 0x00 "MB0_32B_CS,Message Buffer 0 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x80++0x03 line.long 0x00 "MB0_64B_CS,Message Buffer 0 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x80++0x03 line.long 0x00 "MB0_8B_CS,Message Buffer 0 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x84++0x03 line.long 0x00 "ID0,Message Buffer 0 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x84++0x03 line.long 0x00 "MB0_16B_ID,Message Buffer 0 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x84++0x03 line.long 0x00 "MB0_32B_ID,Message Buffer 0 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x84++0x03 line.long 0x00 "MB0_64B_ID,Message Buffer 0 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x84++0x03 line.long 0x00 "MB0_8B_ID,Message Buffer 0 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x88++0x03 line.long 0x00 "MB0_16B_WORD0,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x88++0x03 line.long 0x00 "MB0_32B_WORD0,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x88++0x03 line.long 0x00 "MB0_64B_WORD0,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x88++0x03 line.long 0x00 "MB0_8B_WORD0,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x88++0x03 line.long 0x00 "WORD00,Message Buffer 0 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x8C++0x03 line.long 0x00 "MB0_16B_WORD1,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x8C++0x03 line.long 0x00 "MB0_32B_WORD1,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x8C++0x03 line.long 0x00 "MB0_64B_WORD1,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x8C++0x03 line.long 0x00 "MB0_8B_WORD1,Message Buffer 0 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x8C++0x03 line.long 0x00 "WORD10,Message Buffer 0 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x90++0x03 line.long 0x00 "CS1,Message Buffer 1 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x90++0x03 line.long 0x00 "MB0_16B_WORD2,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x90++0x03 line.long 0x00 "MB0_32B_WORD2,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x90++0x03 line.long 0x00 "MB0_64B_WORD2,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x90++0x03 line.long 0x00 "MB1_8B_CS,Message Buffer 1 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x94++0x03 line.long 0x00 "ID1,Message Buffer 1 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x94++0x03 line.long 0x00 "MB0_16B_WORD3,Message Buffer 0 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x94++0x03 line.long 0x00 "MB0_32B_WORD3,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x94++0x03 line.long 0x00 "MB0_64B_WORD3,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x94++0x03 line.long 0x00 "MB1_8B_ID,Message Buffer 1 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x98++0x03 line.long 0x00 "MB0_32B_WORD4,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x98++0x03 line.long 0x00 "MB0_64B_WORD4,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x98++0x03 line.long 0x00 "MB1_16B_CS,Message Buffer 1 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x98++0x03 line.long 0x00 "MB1_8B_WORD0,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x98++0x03 line.long 0x00 "WORD01,Message Buffer 1 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x9C++0x03 line.long 0x00 "MB0_32B_WORD5,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x9C++0x03 line.long 0x00 "MB0_64B_WORD5,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x9C++0x03 line.long 0x00 "MB1_16B_ID,Message Buffer 1 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x9C++0x03 line.long 0x00 "MB1_8B_WORD1,Message Buffer 1 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x9C++0x03 line.long 0x00 "WORD11,Message Buffer 1 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xA0++0x03 line.long 0x00 "CS2,Message Buffer 2 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xA0++0x03 line.long 0x00 "MB0_32B_WORD6,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0xA0++0x03 line.long 0x00 "MB0_64B_WORD6,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0xA0++0x03 line.long 0x00 "MB1_16B_WORD0,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xA0++0x03 line.long 0x00 "MB2_8B_CS,Message Buffer 2 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xA4++0x03 line.long 0x00 "ID2,Message Buffer 2 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xA4++0x03 line.long 0x00 "MB0_32B_WORD7,Message Buffer 0 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0xA4++0x03 line.long 0x00 "MB0_64B_WORD7,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0xA4++0x03 line.long 0x00 "MB1_16B_WORD1,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xA4++0x03 line.long 0x00 "MB2_8B_ID,Message Buffer 2 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xA8++0x03 line.long 0x00 "MB0_64B_WORD8,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0xA8++0x03 line.long 0x00 "MB1_16B_WORD2,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xA8++0x03 line.long 0x00 "MB1_32B_CS,Message Buffer 1 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xA8++0x03 line.long 0x00 "MB2_8B_WORD0,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xA8++0x03 line.long 0x00 "WORD02,Message Buffer 2 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xAC++0x03 line.long 0x00 "MB0_64B_WORD9,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0xAC++0x03 line.long 0x00 "MB1_16B_WORD3,Message Buffer 1 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xAC++0x03 line.long 0x00 "MB1_32B_ID,Message Buffer 1 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xAC++0x03 line.long 0x00 "MB2_8B_WORD1,Message Buffer 2 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xAC++0x03 line.long 0x00 "WORD12,Message Buffer 2 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xB0++0x03 line.long 0x00 "CS3,Message Buffer 3 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xB0++0x03 line.long 0x00 "MB0_64B_WORD10,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0xB0++0x03 line.long 0x00 "MB1_32B_WORD0,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xB0++0x03 line.long 0x00 "MB2_16B_CS,Message Buffer 2 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xB0++0x03 line.long 0x00 "MB3_8B_CS,Message Buffer 3 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xB4++0x03 line.long 0x00 "ID3,Message Buffer 3 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xB4++0x03 line.long 0x00 "MB0_64B_WORD11,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0xB4++0x03 line.long 0x00 "MB1_32B_WORD1,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xB4++0x03 line.long 0x00 "MB2_16B_ID,Message Buffer 2 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xB4++0x03 line.long 0x00 "MB3_8B_ID,Message Buffer 3 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xB8++0x03 line.long 0x00 "MB0_64B_WORD12,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0xB8++0x03 line.long 0x00 "MB1_32B_WORD2,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xB8++0x03 line.long 0x00 "MB2_16B_WORD0,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xB8++0x03 line.long 0x00 "MB3_8B_WORD0,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xB8++0x03 line.long 0x00 "WORD03,Message Buffer 3 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xBC++0x03 line.long 0x00 "MB0_64B_WORD13,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0xBC++0x03 line.long 0x00 "MB1_32B_WORD3,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xBC++0x03 line.long 0x00 "MB2_16B_WORD1,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xBC++0x03 line.long 0x00 "MB3_8B_WORD1,Message Buffer 3 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xBC++0x03 line.long 0x00 "WORD13,Message Buffer 3 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xC0++0x03 line.long 0x00 "CS4,Message Buffer 4 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xC0++0x03 line.long 0x00 "MB0_64B_WORD14,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0xC0++0x03 line.long 0x00 "MB1_32B_WORD4,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0xC0++0x03 line.long 0x00 "MB2_16B_WORD2,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xC0++0x03 line.long 0x00 "MB4_8B_CS,Message Buffer 4 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xC4++0x03 line.long 0x00 "ID4,Message Buffer 4 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xC4++0x03 line.long 0x00 "MB0_64B_WORD15,Message Buffer 0 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0xC4++0x03 line.long 0x00 "MB1_32B_WORD5,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0xC4++0x03 line.long 0x00 "MB2_16B_WORD3,Message Buffer 2 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xC4++0x03 line.long 0x00 "MB4_8B_ID,Message Buffer 4 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xC8++0x03 line.long 0x00 "MB1_32B_WORD6,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0xC8++0x03 line.long 0x00 "MB1_64B_CS,Message Buffer 1 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xC8++0x03 line.long 0x00 "MB3_16B_CS,Message Buffer 3 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xC8++0x03 line.long 0x00 "MB4_8B_WORD0,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xC8++0x03 line.long 0x00 "WORD04,Message Buffer 4 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xCC++0x03 line.long 0x00 "MB1_32B_WORD7,Message Buffer 1 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0xCC++0x03 line.long 0x00 "MB1_64B_ID,Message Buffer 1 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xCC++0x03 line.long 0x00 "MB3_16B_ID,Message Buffer 3 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xCC++0x03 line.long 0x00 "MB4_8B_WORD1,Message Buffer 4 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xCC++0x03 line.long 0x00 "WORD14,Message Buffer 4 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xD0++0x03 line.long 0x00 "CS5,Message Buffer 5 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xD0++0x03 line.long 0x00 "MB1_64B_WORD0,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xD0++0x03 line.long 0x00 "MB2_32B_CS,Message Buffer 2 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xD0++0x03 line.long 0x00 "MB3_16B_WORD0,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xD0++0x03 line.long 0x00 "MB5_8B_CS,Message Buffer 5 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xD4++0x03 line.long 0x00 "ID5,Message Buffer 5 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xD4++0x03 line.long 0x00 "MB1_64B_WORD1,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xD4++0x03 line.long 0x00 "MB2_32B_ID,Message Buffer 2 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xD4++0x03 line.long 0x00 "MB3_16B_WORD1,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xD4++0x03 line.long 0x00 "MB5_8B_ID,Message Buffer 5 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xD8++0x03 line.long 0x00 "MB1_64B_WORD2,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xD8++0x03 line.long 0x00 "MB2_32B_WORD0,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xD8++0x03 line.long 0x00 "MB3_16B_WORD2,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xD8++0x03 line.long 0x00 "MB5_8B_WORD0,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xD8++0x03 line.long 0x00 "WORD05,Message Buffer 5 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xDC++0x03 line.long 0x00 "MB1_64B_WORD3,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xDC++0x03 line.long 0x00 "MB2_32B_WORD1,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xDC++0x03 line.long 0x00 "MB3_16B_WORD3,Message Buffer 3 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xDC++0x03 line.long 0x00 "MB5_8B_WORD1,Message Buffer 5 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xDC++0x03 line.long 0x00 "WORD15,Message Buffer 5 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xE0++0x03 line.long 0x00 "CS6,Message Buffer 6 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xE0++0x03 line.long 0x00 "MB1_64B_WORD4,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0xE0++0x03 line.long 0x00 "MB2_32B_WORD2,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xE0++0x03 line.long 0x00 "MB4_16B_CS,Message Buffer 4 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xE0++0x03 line.long 0x00 "MB6_8B_CS,Message Buffer 6 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xE4++0x03 line.long 0x00 "ID6,Message Buffer 6 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xE4++0x03 line.long 0x00 "MB1_64B_WORD5,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0xE4++0x03 line.long 0x00 "MB2_32B_WORD3,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xE4++0x03 line.long 0x00 "MB4_16B_ID,Message Buffer 4 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xE4++0x03 line.long 0x00 "MB6_8B_ID,Message Buffer 6 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xE8++0x03 line.long 0x00 "MB1_64B_WORD6,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0xE8++0x03 line.long 0x00 "MB2_32B_WORD4,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0xE8++0x03 line.long 0x00 "MB4_16B_WORD0,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xE8++0x03 line.long 0x00 "MB6_8B_WORD0,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xE8++0x03 line.long 0x00 "WORD06,Message Buffer 6 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xEC++0x03 line.long 0x00 "MB1_64B_WORD7,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0xEC++0x03 line.long 0x00 "MB2_32B_WORD5,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0xEC++0x03 line.long 0x00 "MB4_16B_WORD1,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xEC++0x03 line.long 0x00 "MB6_8B_WORD1,Message Buffer 6 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xEC++0x03 line.long 0x00 "WORD16,Message Buffer 6 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xF0++0x03 line.long 0x00 "CS7,Message Buffer 7 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xF0++0x03 line.long 0x00 "MB1_64B_WORD8,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0xF0++0x03 line.long 0x00 "MB2_32B_WORD6,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0xF0++0x03 line.long 0x00 "MB4_16B_WORD2,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0xF0++0x03 line.long 0x00 "MB7_8B_CS,Message Buffer 7 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xF4++0x03 line.long 0x00 "ID7,Message Buffer 7 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xF4++0x03 line.long 0x00 "MB1_64B_WORD9,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0xF4++0x03 line.long 0x00 "MB2_32B_WORD7,Message Buffer 2 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0xF4++0x03 line.long 0x00 "MB4_16B_WORD3,Message Buffer 4 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0xF4++0x03 line.long 0x00 "MB7_8B_ID,Message Buffer 7 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xF8++0x03 line.long 0x00 "MB1_64B_WORD10,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0xF8++0x03 line.long 0x00 "MB3_32B_CS,Message Buffer 3 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xF8++0x03 line.long 0x00 "MB5_16B_CS,Message Buffer 5 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0xF8++0x03 line.long 0x00 "MB7_8B_WORD0,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xF8++0x03 line.long 0x00 "WORD07,Message Buffer 7 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0xFC++0x03 line.long 0x00 "MB1_64B_WORD11,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0xFC++0x03 line.long 0x00 "MB3_32B_ID,Message Buffer 3 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xFC++0x03 line.long 0x00 "MB5_16B_ID,Message Buffer 5 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0xFC++0x03 line.long 0x00 "MB7_8B_WORD1,Message Buffer 7 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0xFC++0x03 line.long 0x00 "WORD17,Message Buffer 7 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x100++0x03 line.long 0x00 "CS8,Message Buffer 8 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x100++0x03 line.long 0x00 "MB1_64B_WORD12,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x100++0x03 line.long 0x00 "MB3_32B_WORD0,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x100++0x03 line.long 0x00 "MB5_16B_WORD0,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x100++0x03 line.long 0x00 "MB8_8B_CS,Message Buffer 8 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x104++0x03 line.long 0x00 "ID8,Message Buffer 8 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x104++0x03 line.long 0x00 "MB1_64B_WORD13,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x104++0x03 line.long 0x00 "MB3_32B_WORD1,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x104++0x03 line.long 0x00 "MB5_16B_WORD1,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x104++0x03 line.long 0x00 "MB8_8B_ID,Message Buffer 8 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x108++0x03 line.long 0x00 "MB1_64B_WORD14,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x108++0x03 line.long 0x00 "MB3_32B_WORD2,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x108++0x03 line.long 0x00 "MB5_16B_WORD2,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x108++0x03 line.long 0x00 "MB8_8B_WORD0,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x108++0x03 line.long 0x00 "WORD08,Message Buffer 8 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x10C++0x03 line.long 0x00 "MB1_64B_WORD15,Message Buffer 1 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x10C++0x03 line.long 0x00 "MB3_32B_WORD3,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x10C++0x03 line.long 0x00 "MB5_16B_WORD3,Message Buffer 5 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x10C++0x03 line.long 0x00 "MB8_8B_WORD1,Message Buffer 8 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x10C++0x03 line.long 0x00 "WORD18,Message Buffer 8 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x110++0x03 line.long 0x00 "CS9,Message Buffer 9 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x110++0x03 line.long 0x00 "MB2_64B_CS,Message Buffer 2 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x110++0x03 line.long 0x00 "MB3_32B_WORD4,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x110++0x03 line.long 0x00 "MB6_16B_CS,Message Buffer 6 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x110++0x03 line.long 0x00 "MB9_8B_CS,Message Buffer 9 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x114++0x03 line.long 0x00 "ID9,Message Buffer 9 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x114++0x03 line.long 0x00 "MB2_64B_ID,Message Buffer 2 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x114++0x03 line.long 0x00 "MB3_32B_WORD5,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x114++0x03 line.long 0x00 "MB6_16B_ID,Message Buffer 6 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x114++0x03 line.long 0x00 "MB9_8B_ID,Message Buffer 9 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x118++0x03 line.long 0x00 "MB2_64B_WORD0,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x118++0x03 line.long 0x00 "MB3_32B_WORD6,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x118++0x03 line.long 0x00 "MB6_16B_WORD0,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x118++0x03 line.long 0x00 "MB9_8B_WORD0,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x118++0x03 line.long 0x00 "WORD09,Message Buffer 9 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x11C++0x03 line.long 0x00 "MB2_64B_WORD1,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x11C++0x03 line.long 0x00 "MB3_32B_WORD7,Message Buffer 3 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x11C++0x03 line.long 0x00 "MB6_16B_WORD1,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x11C++0x03 line.long 0x00 "MB9_8B_WORD1,Message Buffer 9 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x11C++0x03 line.long 0x00 "WORD19,Message Buffer 9 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x120++0x03 line.long 0x00 "CS10,Message Buffer 10 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x120++0x03 line.long 0x00 "MB10_8B_CS,Message Buffer 10 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x120++0x03 line.long 0x00 "MB2_64B_WORD2,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x120++0x03 line.long 0x00 "MB4_32B_CS,Message Buffer 4 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x120++0x03 line.long 0x00 "MB6_16B_WORD2,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x124++0x03 line.long 0x00 "ID10,Message Buffer 10 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x124++0x03 line.long 0x00 "MB10_8B_ID,Message Buffer 10 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x124++0x03 line.long 0x00 "MB2_64B_WORD3,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x124++0x03 line.long 0x00 "MB4_32B_ID,Message Buffer 4 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x124++0x03 line.long 0x00 "MB6_16B_WORD3,Message Buffer 6 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x128++0x03 line.long 0x00 "MB10_8B_WORD0,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x128++0x03 line.long 0x00 "MB2_64B_WORD4,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x128++0x03 line.long 0x00 "MB4_32B_WORD0,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x128++0x03 line.long 0x00 "MB7_16B_CS,Message Buffer 7 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x128++0x03 line.long 0x00 "WORD010,Message Buffer 10 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x12C++0x03 line.long 0x00 "MB10_8B_WORD1,Message Buffer 10 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x12C++0x03 line.long 0x00 "MB2_64B_WORD5,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x12C++0x03 line.long 0x00 "MB4_32B_WORD1,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x12C++0x03 line.long 0x00 "MB7_16B_ID,Message Buffer 7 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x12C++0x03 line.long 0x00 "WORD110,Message Buffer 10 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x130++0x03 line.long 0x00 "CS11,Message Buffer 11 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x130++0x03 line.long 0x00 "MB11_8B_CS,Message Buffer 11 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x130++0x03 line.long 0x00 "MB2_64B_WORD6,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x130++0x03 line.long 0x00 "MB4_32B_WORD2,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x130++0x03 line.long 0x00 "MB7_16B_WORD0,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x134++0x03 line.long 0x00 "ID11,Message Buffer 11 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x134++0x03 line.long 0x00 "MB11_8B_ID,Message Buffer 11 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x134++0x03 line.long 0x00 "MB2_64B_WORD7,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x134++0x03 line.long 0x00 "MB4_32B_WORD3,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x134++0x03 line.long 0x00 "MB7_16B_WORD1,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x138++0x03 line.long 0x00 "MB11_8B_WORD0,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x138++0x03 line.long 0x00 "MB2_64B_WORD8,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x138++0x03 line.long 0x00 "MB4_32B_WORD4,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x138++0x03 line.long 0x00 "MB7_16B_WORD2,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x138++0x03 line.long 0x00 "WORD011,Message Buffer 11 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x13C++0x03 line.long 0x00 "MB11_8B_WORD1,Message Buffer 11 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x13C++0x03 line.long 0x00 "MB2_64B_WORD9,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x13C++0x03 line.long 0x00 "MB4_32B_WORD5,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x13C++0x03 line.long 0x00 "MB7_16B_WORD3,Message Buffer 7 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x13C++0x03 line.long 0x00 "WORD111,Message Buffer 11 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x140++0x03 line.long 0x00 "CS12,Message Buffer 12 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x140++0x03 line.long 0x00 "MB12_8B_CS,Message Buffer 12 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x140++0x03 line.long 0x00 "MB2_64B_WORD10,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x140++0x03 line.long 0x00 "MB4_32B_WORD6,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x140++0x03 line.long 0x00 "MB8_16B_CS,Message Buffer 8 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x144++0x03 line.long 0x00 "ID12,Message Buffer 12 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x144++0x03 line.long 0x00 "MB12_8B_ID,Message Buffer 12 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x144++0x03 line.long 0x00 "MB2_64B_WORD11,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x144++0x03 line.long 0x00 "MB4_32B_WORD7,Message Buffer 4 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x144++0x03 line.long 0x00 "MB8_16B_ID,Message Buffer 8 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x148++0x03 line.long 0x00 "MB12_8B_WORD0,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x148++0x03 line.long 0x00 "MB2_64B_WORD12,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x148++0x03 line.long 0x00 "MB5_32B_CS,Message Buffer 5 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x148++0x03 line.long 0x00 "MB8_16B_WORD0,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x148++0x03 line.long 0x00 "WORD012,Message Buffer 12 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x14C++0x03 line.long 0x00 "MB12_8B_WORD1,Message Buffer 12 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x14C++0x03 line.long 0x00 "MB2_64B_WORD13,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x14C++0x03 line.long 0x00 "MB5_32B_ID,Message Buffer 5 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x14C++0x03 line.long 0x00 "MB8_16B_WORD1,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x14C++0x03 line.long 0x00 "WORD112,Message Buffer 12 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x150++0x03 line.long 0x00 "CS13,Message Buffer 13 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x150++0x03 line.long 0x00 "MB13_8B_CS,Message Buffer 13 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x150++0x03 line.long 0x00 "MB2_64B_WORD14,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x150++0x03 line.long 0x00 "MB5_32B_WORD0,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x150++0x03 line.long 0x00 "MB8_16B_WORD2,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x154++0x03 line.long 0x00 "ID13,Message Buffer 13 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x154++0x03 line.long 0x00 "MB13_8B_ID,Message Buffer 13 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x154++0x03 line.long 0x00 "MB2_64B_WORD15,Message Buffer 2 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x154++0x03 line.long 0x00 "MB5_32B_WORD1,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x154++0x03 line.long 0x00 "MB8_16B_WORD3,Message Buffer 8 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x158++0x03 line.long 0x00 "MB13_8B_WORD0,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x158++0x03 line.long 0x00 "MB3_64B_CS,Message Buffer 3 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x158++0x03 line.long 0x00 "MB5_32B_WORD2,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x158++0x03 line.long 0x00 "MB9_16B_CS,Message Buffer 9 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x158++0x03 line.long 0x00 "WORD013,Message Buffer 13 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x15C++0x03 line.long 0x00 "MB13_8B_WORD1,Message Buffer 13 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x15C++0x03 line.long 0x00 "MB3_64B_ID,Message Buffer 3 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x15C++0x03 line.long 0x00 "MB5_32B_WORD3,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x15C++0x03 line.long 0x00 "MB9_16B_ID,Message Buffer 9 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x15C++0x03 line.long 0x00 "WORD113,Message Buffer 13 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x160++0x03 line.long 0x00 "CS14,Message Buffer 14 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x160++0x03 line.long 0x00 "MB14_8B_CS,Message Buffer 14 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x160++0x03 line.long 0x00 "MB3_64B_WORD0,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x160++0x03 line.long 0x00 "MB5_32B_WORD4,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x160++0x03 line.long 0x00 "MB9_16B_WORD0,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x164++0x03 line.long 0x00 "ID14,Message Buffer 14 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x164++0x03 line.long 0x00 "MB14_8B_ID,Message Buffer 14 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x164++0x03 line.long 0x00 "MB3_64B_WORD1,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x164++0x03 line.long 0x00 "MB5_32B_WORD5,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x164++0x03 line.long 0x00 "MB9_16B_WORD1,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x168++0x03 line.long 0x00 "MB14_8B_WORD0,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x168++0x03 line.long 0x00 "MB3_64B_WORD2,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x168++0x03 line.long 0x00 "MB5_32B_WORD6,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x168++0x03 line.long 0x00 "MB9_16B_WORD2,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x168++0x03 line.long 0x00 "WORD014,Message Buffer 14 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x16C++0x03 line.long 0x00 "MB14_8B_WORD1,Message Buffer 14 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x16C++0x03 line.long 0x00 "MB3_64B_WORD3,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x16C++0x03 line.long 0x00 "MB5_32B_WORD7,Message Buffer 5 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x16C++0x03 line.long 0x00 "MB9_16B_WORD3,Message Buffer 9 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x16C++0x03 line.long 0x00 "WORD114,Message Buffer 14 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x170++0x03 line.long 0x00 "CS15,Message Buffer 15 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x170++0x03 line.long 0x00 "MB10_16B_CS,Message Buffer 10 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x170++0x03 line.long 0x00 "MB15_8B_CS,Message Buffer 15 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x170++0x03 line.long 0x00 "MB3_64B_WORD4,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x170++0x03 line.long 0x00 "MB6_32B_CS,Message Buffer 6 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x174++0x03 line.long 0x00 "ID15,Message Buffer 15 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x174++0x03 line.long 0x00 "MB10_16B_ID,Message Buffer 10 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x174++0x03 line.long 0x00 "MB15_8B_ID,Message Buffer 15 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x174++0x03 line.long 0x00 "MB3_64B_WORD5,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x174++0x03 line.long 0x00 "MB6_32B_ID,Message Buffer 6 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x178++0x03 line.long 0x00 "MB10_16B_WORD0,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x178++0x03 line.long 0x00 "MB15_8B_WORD0,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x178++0x03 line.long 0x00 "MB3_64B_WORD6,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x178++0x03 line.long 0x00 "MB6_32B_WORD0,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x178++0x03 line.long 0x00 "WORD015,Message Buffer 15 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x17C++0x03 line.long 0x00 "MB10_16B_WORD1,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x17C++0x03 line.long 0x00 "MB15_8B_WORD1,Message Buffer 15 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x17C++0x03 line.long 0x00 "MB3_64B_WORD7,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x17C++0x03 line.long 0x00 "MB6_32B_WORD1,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x17C++0x03 line.long 0x00 "WORD115,Message Buffer 15 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x180++0x03 line.long 0x00 "CS16,Message Buffer 16 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x180++0x03 line.long 0x00 "MB10_16B_WORD2,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x180++0x03 line.long 0x00 "MB16_8B_CS,Message Buffer 16 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x180++0x03 line.long 0x00 "MB3_64B_WORD8,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x180++0x03 line.long 0x00 "MB6_32B_WORD2,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x184++0x03 line.long 0x00 "ID16,Message Buffer 16 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x184++0x03 line.long 0x00 "MB10_16B_WORD3,Message Buffer 10 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x184++0x03 line.long 0x00 "MB16_8B_ID,Message Buffer 16 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x184++0x03 line.long 0x00 "MB3_64B_WORD9,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x184++0x03 line.long 0x00 "MB6_32B_WORD3,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x188++0x03 line.long 0x00 "MB11_16B_CS,Message Buffer 11 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x188++0x03 line.long 0x00 "MB16_8B_WORD0,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x188++0x03 line.long 0x00 "MB3_64B_WORD10,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x188++0x03 line.long 0x00 "MB6_32B_WORD4,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x188++0x03 line.long 0x00 "WORD016,Message Buffer 16 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x18C++0x03 line.long 0x00 "MB11_16B_ID,Message Buffer 11 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x18C++0x03 line.long 0x00 "MB16_8B_WORD1,Message Buffer 16 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x18C++0x03 line.long 0x00 "MB3_64B_WORD11,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x18C++0x03 line.long 0x00 "MB6_32B_WORD5,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x18C++0x03 line.long 0x00 "WORD116,Message Buffer 16 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x190++0x03 line.long 0x00 "CS17,Message Buffer 17 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x190++0x03 line.long 0x00 "MB11_16B_WORD0,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x190++0x03 line.long 0x00 "MB17_8B_CS,Message Buffer 17 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x190++0x03 line.long 0x00 "MB3_64B_WORD12,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x190++0x03 line.long 0x00 "MB6_32B_WORD6,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x194++0x03 line.long 0x00 "ID17,Message Buffer 17 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x194++0x03 line.long 0x00 "MB11_16B_WORD1,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x194++0x03 line.long 0x00 "MB17_8B_ID,Message Buffer 17 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x194++0x03 line.long 0x00 "MB3_64B_WORD13,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x194++0x03 line.long 0x00 "MB6_32B_WORD7,Message Buffer 6 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x198++0x03 line.long 0x00 "MB11_16B_WORD2,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x198++0x03 line.long 0x00 "MB17_8B_WORD0,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x198++0x03 line.long 0x00 "MB3_64B_WORD14,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x198++0x03 line.long 0x00 "MB7_32B_CS,Message Buffer 7 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x198++0x03 line.long 0x00 "WORD017,Message Buffer 17 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x19C++0x03 line.long 0x00 "MB11_16B_WORD3,Message Buffer 11 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x19C++0x03 line.long 0x00 "MB17_8B_WORD1,Message Buffer 17 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x19C++0x03 line.long 0x00 "MB3_64B_WORD15,Message Buffer 3 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x19C++0x03 line.long 0x00 "MB7_32B_ID,Message Buffer 7 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x19C++0x03 line.long 0x00 "WORD117,Message Buffer 17 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1A0++0x03 line.long 0x00 "CS18,Message Buffer 18 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1A0++0x03 line.long 0x00 "MB12_16B_CS,Message Buffer 12 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1A0++0x03 line.long 0x00 "MB18_8B_CS,Message Buffer 18 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1A0++0x03 line.long 0x00 "MB4_64B_CS,Message Buffer 4 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1A0++0x03 line.long 0x00 "MB7_32B_WORD0,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1A4++0x03 line.long 0x00 "ID18,Message Buffer 18 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1A4++0x03 line.long 0x00 "MB12_16B_ID,Message Buffer 12 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1A4++0x03 line.long 0x00 "MB18_8B_ID,Message Buffer 18 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1A4++0x03 line.long 0x00 "MB4_64B_ID,Message Buffer 4 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1A4++0x03 line.long 0x00 "MB7_32B_WORD1,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1A8++0x03 line.long 0x00 "MB12_16B_WORD0,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1A8++0x03 line.long 0x00 "MB18_8B_WORD0,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1A8++0x03 line.long 0x00 "MB4_64B_WORD0,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1A8++0x03 line.long 0x00 "MB7_32B_WORD2,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1A8++0x03 line.long 0x00 "WORD018,Message Buffer 18 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1AC++0x03 line.long 0x00 "MB12_16B_WORD1,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1AC++0x03 line.long 0x00 "MB18_8B_WORD1,Message Buffer 18 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1AC++0x03 line.long 0x00 "MB4_64B_WORD1,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1AC++0x03 line.long 0x00 "MB7_32B_WORD3,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1AC++0x03 line.long 0x00 "WORD118,Message Buffer 18 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1B0++0x03 line.long 0x00 "CS19,Message Buffer 19 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1B0++0x03 line.long 0x00 "MB12_16B_WORD2,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1B0++0x03 line.long 0x00 "MB19_8B_CS,Message Buffer 19 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1B0++0x03 line.long 0x00 "MB4_64B_WORD2,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1B0++0x03 line.long 0x00 "MB7_32B_WORD4,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x1B4++0x03 line.long 0x00 "ID19,Message Buffer 19 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1B4++0x03 line.long 0x00 "MB12_16B_WORD3,Message Buffer 12 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1B4++0x03 line.long 0x00 "MB19_8B_ID,Message Buffer 19 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1B4++0x03 line.long 0x00 "MB4_64B_WORD3,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1B4++0x03 line.long 0x00 "MB7_32B_WORD5,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x1B8++0x03 line.long 0x00 "MB13_16B_CS,Message Buffer 13 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1B8++0x03 line.long 0x00 "MB19_8B_WORD0,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1B8++0x03 line.long 0x00 "MB4_64B_WORD4,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x1B8++0x03 line.long 0x00 "MB7_32B_WORD6,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x1B8++0x03 line.long 0x00 "WORD019,Message Buffer 19 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1BC++0x03 line.long 0x00 "MB13_16B_ID,Message Buffer 13 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1BC++0x03 line.long 0x00 "MB19_8B_WORD1,Message Buffer 19 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1BC++0x03 line.long 0x00 "MB4_64B_WORD5,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x1BC++0x03 line.long 0x00 "MB7_32B_WORD7,Message Buffer 7 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x1BC++0x03 line.long 0x00 "WORD119,Message Buffer 19 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1C0++0x03 line.long 0x00 "CS20,Message Buffer 20 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1C0++0x03 line.long 0x00 "MB13_16B_WORD0,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1C0++0x03 line.long 0x00 "MB20_8B_CS,Message Buffer 20 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1C0++0x03 line.long 0x00 "MB4_64B_WORD6,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x1C0++0x03 line.long 0x00 "MB8_32B_CS,Message Buffer 8 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1C4++0x03 line.long 0x00 "ID20,Message Buffer 20 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1C4++0x03 line.long 0x00 "MB13_16B_WORD1,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1C4++0x03 line.long 0x00 "MB20_8B_ID,Message Buffer 20 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1C4++0x03 line.long 0x00 "MB4_64B_WORD7,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x1C4++0x03 line.long 0x00 "MB8_32B_ID,Message Buffer 8 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1C8++0x03 line.long 0x00 "MB13_16B_WORD2,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1C8++0x03 line.long 0x00 "MB20_8B_WORD0,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1C8++0x03 line.long 0x00 "MB4_64B_WORD8,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x1C8++0x03 line.long 0x00 "MB8_32B_WORD0,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1C8++0x03 line.long 0x00 "WORD020,Message Buffer 20 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1CC++0x03 line.long 0x00 "MB13_16B_WORD3,Message Buffer 13 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1CC++0x03 line.long 0x00 "MB20_8B_WORD1,Message Buffer 20 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1CC++0x03 line.long 0x00 "MB4_64B_WORD9,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x1CC++0x03 line.long 0x00 "MB8_32B_WORD1,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1CC++0x03 line.long 0x00 "WORD120,Message Buffer 20 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1D0++0x03 line.long 0x00 "CS21,Message Buffer 21 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1D0++0x03 line.long 0x00 "MB14_16B_CS,Message Buffer 14 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1D0++0x03 line.long 0x00 "MB21_8B_CS,Message Buffer 21 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1D0++0x03 line.long 0x00 "MB4_64B_WORD10,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x1D0++0x03 line.long 0x00 "MB8_32B_WORD2,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1D4++0x03 line.long 0x00 "ID21,Message Buffer 21 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1D4++0x03 line.long 0x00 "MB14_16B_ID,Message Buffer 14 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1D4++0x03 line.long 0x00 "MB21_8B_ID,Message Buffer 21 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1D4++0x03 line.long 0x00 "MB4_64B_WORD11,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x1D4++0x03 line.long 0x00 "MB8_32B_WORD3,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1D8++0x03 line.long 0x00 "MB14_16B_WORD0,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1D8++0x03 line.long 0x00 "MB21_8B_WORD0,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1D8++0x03 line.long 0x00 "MB4_64B_WORD12,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x1D8++0x03 line.long 0x00 "MB8_32B_WORD4,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x1D8++0x03 line.long 0x00 "WORD021,Message Buffer 21 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1DC++0x03 line.long 0x00 "MB14_16B_WORD1,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1DC++0x03 line.long 0x00 "MB21_8B_WORD1,Message Buffer 21 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1DC++0x03 line.long 0x00 "MB4_64B_WORD13,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x1DC++0x03 line.long 0x00 "MB8_32B_WORD5,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x1DC++0x03 line.long 0x00 "WORD121,Message Buffer 21 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1E0++0x03 line.long 0x00 "CS22,Message Buffer 22 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1E0++0x03 line.long 0x00 "MB14_16B_WORD2,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1E0++0x03 line.long 0x00 "MB22_8B_CS,Message Buffer 22 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1E0++0x03 line.long 0x00 "MB4_64B_WORD14,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x1E0++0x03 line.long 0x00 "MB8_32B_WORD6,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x1E4++0x03 line.long 0x00 "ID22,Message Buffer 22 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1E4++0x03 line.long 0x00 "MB14_16B_WORD3,Message Buffer 14 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1E4++0x03 line.long 0x00 "MB22_8B_ID,Message Buffer 22 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1E4++0x03 line.long 0x00 "MB4_64B_WORD15,Message Buffer 4 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x1E4++0x03 line.long 0x00 "MB8_32B_WORD7,Message Buffer 8 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x1E8++0x03 line.long 0x00 "MB15_16B_CS,Message Buffer 15 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1E8++0x03 line.long 0x00 "MB22_8B_WORD0,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1E8++0x03 line.long 0x00 "MB5_64B_CS,Message Buffer 5 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1E8++0x03 line.long 0x00 "MB9_32B_CS,Message Buffer 9 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1E8++0x03 line.long 0x00 "WORD022,Message Buffer 22 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1EC++0x03 line.long 0x00 "MB15_16B_ID,Message Buffer 15 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1EC++0x03 line.long 0x00 "MB22_8B_WORD1,Message Buffer 22 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1EC++0x03 line.long 0x00 "MB5_64B_ID,Message Buffer 5 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1EC++0x03 line.long 0x00 "MB9_32B_ID,Message Buffer 9 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1EC++0x03 line.long 0x00 "WORD122,Message Buffer 22 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1F0++0x03 line.long 0x00 "CS23,Message Buffer 23 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1F0++0x03 line.long 0x00 "MB15_16B_WORD0,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1F0++0x03 line.long 0x00 "MB23_8B_CS,Message Buffer 23 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x1F0++0x03 line.long 0x00 "MB5_64B_WORD0,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1F0++0x03 line.long 0x00 "MB9_32B_WORD0,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1F4++0x03 line.long 0x00 "ID23,Message Buffer 23 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1F4++0x03 line.long 0x00 "MB15_16B_WORD1,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1F4++0x03 line.long 0x00 "MB23_8B_ID,Message Buffer 23 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x1F4++0x03 line.long 0x00 "MB5_64B_WORD1,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1F4++0x03 line.long 0x00 "MB9_32B_WORD1,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1F8++0x03 line.long 0x00 "MB15_16B_WORD2,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1F8++0x03 line.long 0x00 "MB23_8B_WORD0,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1F8++0x03 line.long 0x00 "MB5_64B_WORD2,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1F8++0x03 line.long 0x00 "MB9_32B_WORD2,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x1F8++0x03 line.long 0x00 "WORD023,Message Buffer 23 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x1FC++0x03 line.long 0x00 "MB15_16B_WORD3,Message Buffer 15 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1FC++0x03 line.long 0x00 "MB23_8B_WORD1,Message Buffer 23 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x1FC++0x03 line.long 0x00 "MB5_64B_WORD3,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1FC++0x03 line.long 0x00 "MB9_32B_WORD3,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x1FC++0x03 line.long 0x00 "WORD123,Message Buffer 23 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x200++0x03 line.long 0x00 "CS24,Message Buffer 24 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x200++0x03 line.long 0x00 "MB16_16B_CS,Message Buffer 16 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x200++0x03 line.long 0x00 "MB24_8B_CS,Message Buffer 24 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x200++0x03 line.long 0x00 "MB5_64B_WORD4,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x200++0x03 line.long 0x00 "MB9_32B_WORD4,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x204++0x03 line.long 0x00 "ID24,Message Buffer 24 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x204++0x03 line.long 0x00 "MB16_16B_ID,Message Buffer 16 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x204++0x03 line.long 0x00 "MB24_8B_ID,Message Buffer 24 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x204++0x03 line.long 0x00 "MB5_64B_WORD5,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x204++0x03 line.long 0x00 "MB9_32B_WORD5,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x208++0x03 line.long 0x00 "MB16_16B_WORD0,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x208++0x03 line.long 0x00 "MB24_8B_WORD0,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x208++0x03 line.long 0x00 "MB5_64B_WORD6,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x208++0x03 line.long 0x00 "MB9_32B_WORD6,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x208++0x03 line.long 0x00 "WORD024,Message Buffer 24 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x20C++0x03 line.long 0x00 "MB16_16B_WORD1,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x20C++0x03 line.long 0x00 "MB24_8B_WORD1,Message Buffer 24 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x20C++0x03 line.long 0x00 "MB5_64B_WORD7,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x20C++0x03 line.long 0x00 "MB9_32B_WORD7,Message Buffer 9 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x20C++0x03 line.long 0x00 "WORD124,Message Buffer 24 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x210++0x03 line.long 0x00 "CS25,Message Buffer 25 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x210++0x03 line.long 0x00 "MB10_32B_CS,Message Buffer 10 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x210++0x03 line.long 0x00 "MB16_16B_WORD2,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x210++0x03 line.long 0x00 "MB25_8B_CS,Message Buffer 25 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x210++0x03 line.long 0x00 "MB5_64B_WORD8,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x214++0x03 line.long 0x00 "ID25,Message Buffer 25 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x214++0x03 line.long 0x00 "MB10_32B_ID,Message Buffer 10 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x214++0x03 line.long 0x00 "MB16_16B_WORD3,Message Buffer 16 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x214++0x03 line.long 0x00 "MB25_8B_ID,Message Buffer 25 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x214++0x03 line.long 0x00 "MB5_64B_WORD9,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x218++0x03 line.long 0x00 "MB10_32B_WORD0,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x218++0x03 line.long 0x00 "MB17_16B_CS,Message Buffer 17 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x218++0x03 line.long 0x00 "MB25_8B_WORD0,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x218++0x03 line.long 0x00 "MB5_64B_WORD10,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x218++0x03 line.long 0x00 "WORD025,Message Buffer 25 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x21C++0x03 line.long 0x00 "MB10_32B_WORD1,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x21C++0x03 line.long 0x00 "MB17_16B_ID,Message Buffer 17 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x21C++0x03 line.long 0x00 "MB25_8B_WORD1,Message Buffer 25 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x21C++0x03 line.long 0x00 "MB5_64B_WORD11,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x21C++0x03 line.long 0x00 "WORD125,Message Buffer 25 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x220++0x03 line.long 0x00 "CS26,Message Buffer 26 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x220++0x03 line.long 0x00 "MB10_32B_WORD2,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x220++0x03 line.long 0x00 "MB17_16B_WORD0,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x220++0x03 line.long 0x00 "MB26_8B_CS,Message Buffer 26 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x220++0x03 line.long 0x00 "MB5_64B_WORD12,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x224++0x03 line.long 0x00 "ID26,Message Buffer 26 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x224++0x03 line.long 0x00 "MB10_32B_WORD3,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x224++0x03 line.long 0x00 "MB17_16B_WORD1,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x224++0x03 line.long 0x00 "MB26_8B_ID,Message Buffer 26 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x224++0x03 line.long 0x00 "MB5_64B_WORD13,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x228++0x03 line.long 0x00 "MB10_32B_WORD4,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x228++0x03 line.long 0x00 "MB17_16B_WORD2,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x228++0x03 line.long 0x00 "MB26_8B_WORD0,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x228++0x03 line.long 0x00 "MB5_64B_WORD14,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x228++0x03 line.long 0x00 "WORD026,Message Buffer 26 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x22C++0x03 line.long 0x00 "MB10_32B_WORD5,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x22C++0x03 line.long 0x00 "MB17_16B_WORD3,Message Buffer 17 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x22C++0x03 line.long 0x00 "MB26_8B_WORD1,Message Buffer 26 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x22C++0x03 line.long 0x00 "MB5_64B_WORD15,Message Buffer 5 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x22C++0x03 line.long 0x00 "WORD126,Message Buffer 26 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x230++0x03 line.long 0x00 "CS27,Message Buffer 27 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x230++0x03 line.long 0x00 "MB10_32B_WORD6,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x230++0x03 line.long 0x00 "MB18_16B_CS,Message Buffer 18 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x230++0x03 line.long 0x00 "MB27_8B_CS,Message Buffer 27 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x230++0x03 line.long 0x00 "MB6_64B_CS,Message Buffer 6 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x234++0x03 line.long 0x00 "ID27,Message Buffer 27 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x234++0x03 line.long 0x00 "MB10_32B_WORD7,Message Buffer 10 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x234++0x03 line.long 0x00 "MB18_16B_ID,Message Buffer 18 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x234++0x03 line.long 0x00 "MB27_8B_ID,Message Buffer 27 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x234++0x03 line.long 0x00 "MB6_64B_ID,Message Buffer 6 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x238++0x03 line.long 0x00 "MB11_32B_CS,Message Buffer 11 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x238++0x03 line.long 0x00 "MB18_16B_WORD0,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x238++0x03 line.long 0x00 "MB27_8B_WORD0,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x238++0x03 line.long 0x00 "MB6_64B_WORD0,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x238++0x03 line.long 0x00 "WORD027,Message Buffer 27 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x23C++0x03 line.long 0x00 "MB11_32B_ID,Message Buffer 11 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x23C++0x03 line.long 0x00 "MB18_16B_WORD1,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x23C++0x03 line.long 0x00 "MB27_8B_WORD1,Message Buffer 27 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x23C++0x03 line.long 0x00 "MB6_64B_WORD1,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x23C++0x03 line.long 0x00 "WORD127,Message Buffer 27 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x240++0x03 line.long 0x00 "CS28,Message Buffer 28 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x240++0x03 line.long 0x00 "MB11_32B_WORD0,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x240++0x03 line.long 0x00 "MB18_16B_WORD2,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x240++0x03 line.long 0x00 "MB28_8B_CS,Message Buffer 28 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x240++0x03 line.long 0x00 "MB6_64B_WORD2,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x244++0x03 line.long 0x00 "ID28,Message Buffer 28 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x244++0x03 line.long 0x00 "MB11_32B_WORD1,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x244++0x03 line.long 0x00 "MB18_16B_WORD3,Message Buffer 18 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x244++0x03 line.long 0x00 "MB28_8B_ID,Message Buffer 28 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x244++0x03 line.long 0x00 "MB6_64B_WORD3,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x248++0x03 line.long 0x00 "MB11_32B_WORD2,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x248++0x03 line.long 0x00 "MB19_16B_CS,Message Buffer 19 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x248++0x03 line.long 0x00 "MB28_8B_WORD0,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x248++0x03 line.long 0x00 "MB6_64B_WORD4,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x248++0x03 line.long 0x00 "WORD028,Message Buffer 28 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x24C++0x03 line.long 0x00 "MB11_32B_WORD3,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x24C++0x03 line.long 0x00 "MB19_16B_ID,Message Buffer 19 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x24C++0x03 line.long 0x00 "MB28_8B_WORD1,Message Buffer 28 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x24C++0x03 line.long 0x00 "MB6_64B_WORD5,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x24C++0x03 line.long 0x00 "WORD128,Message Buffer 28 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x250++0x03 line.long 0x00 "CS29,Message Buffer 29 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x250++0x03 line.long 0x00 "MB11_32B_WORD4,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x250++0x03 line.long 0x00 "MB19_16B_WORD0,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x250++0x03 line.long 0x00 "MB29_8B_CS,Message Buffer 29 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x250++0x03 line.long 0x00 "MB6_64B_WORD6,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x254++0x03 line.long 0x00 "ID29,Message Buffer 29 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x254++0x03 line.long 0x00 "MB11_32B_WORD5,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x254++0x03 line.long 0x00 "MB19_16B_WORD1,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x254++0x03 line.long 0x00 "MB29_8B_ID,Message Buffer 29 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x254++0x03 line.long 0x00 "MB6_64B_WORD7,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x258++0x03 line.long 0x00 "MB11_32B_WORD6,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x258++0x03 line.long 0x00 "MB19_16B_WORD2,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x258++0x03 line.long 0x00 "MB29_8B_WORD0,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x258++0x03 line.long 0x00 "MB6_64B_WORD8,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x258++0x03 line.long 0x00 "WORD029,Message Buffer 29 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x25C++0x03 line.long 0x00 "MB11_32B_WORD7,Message Buffer 11 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x25C++0x03 line.long 0x00 "MB19_16B_WORD3,Message Buffer 19 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x25C++0x03 line.long 0x00 "MB29_8B_WORD1,Message Buffer 29 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x25C++0x03 line.long 0x00 "MB6_64B_WORD9,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x25C++0x03 line.long 0x00 "WORD129,Message Buffer 29 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x260++0x03 line.long 0x00 "CS30,Message Buffer 30 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x260++0x03 line.long 0x00 "MB12_32B_CS,Message Buffer 12 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x260++0x03 line.long 0x00 "MB20_16B_CS,Message Buffer 20 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x260++0x03 line.long 0x00 "MB30_8B_CS,Message Buffer 30 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x260++0x03 line.long 0x00 "MB6_64B_WORD10,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x264++0x03 line.long 0x00 "ID30,Message Buffer 30 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x264++0x03 line.long 0x00 "MB12_32B_ID,Message Buffer 12 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x264++0x03 line.long 0x00 "MB20_16B_ID,Message Buffer 20 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x264++0x03 line.long 0x00 "MB30_8B_ID,Message Buffer 30 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x264++0x03 line.long 0x00 "MB6_64B_WORD11,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x268++0x03 line.long 0x00 "MB12_32B_WORD0,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x268++0x03 line.long 0x00 "MB20_16B_WORD0,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x268++0x03 line.long 0x00 "MB30_8B_WORD0,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x268++0x03 line.long 0x00 "MB6_64B_WORD12,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x268++0x03 line.long 0x00 "WORD030,Message Buffer 30 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x26C++0x03 line.long 0x00 "MB12_32B_WORD1,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x26C++0x03 line.long 0x00 "MB20_16B_WORD1,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x26C++0x03 line.long 0x00 "MB30_8B_WORD1,Message Buffer 30 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x26C++0x03 line.long 0x00 "MB6_64B_WORD13,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x26C++0x03 line.long 0x00 "WORD130,Message Buffer 30 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x270++0x03 line.long 0x00 "CS31,Message Buffer 31 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x270++0x03 line.long 0x00 "MB12_32B_WORD2,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x270++0x03 line.long 0x00 "MB20_16B_WORD2,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x270++0x03 line.long 0x00 "MB31_8B_CS,Message Buffer 31 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x270++0x03 line.long 0x00 "MB6_64B_WORD14,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x274++0x03 line.long 0x00 "ID31,Message Buffer 31 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x274++0x03 line.long 0x00 "MB12_32B_WORD3,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x274++0x03 line.long 0x00 "MB20_16B_WORD3,Message Buffer 20 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x274++0x03 line.long 0x00 "MB31_8B_ID,Message Buffer 31 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x274++0x03 line.long 0x00 "MB6_64B_WORD15,Message Buffer 6 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x278++0x03 line.long 0x00 "MB12_32B_WORD4,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x278++0x03 line.long 0x00 "MB21_16B_CS,Message Buffer 21 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x278++0x03 line.long 0x00 "MB31_8B_WORD0,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x278++0x03 line.long 0x00 "MB7_64B_CS,Message Buffer 7 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x278++0x03 line.long 0x00 "WORD031,Message Buffer 31 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x27C++0x03 line.long 0x00 "MB12_32B_WORD5,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x27C++0x03 line.long 0x00 "MB21_16B_ID,Message Buffer 21 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x27C++0x03 line.long 0x00 "MB31_8B_WORD1,Message Buffer 31 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x27C++0x03 line.long 0x00 "MB7_64B_ID,Message Buffer 7 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x27C++0x03 line.long 0x00 "WORD131,Message Buffer 31 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x280++0x03 line.long 0x00 "CS32,Message Buffer 32 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x280++0x03 line.long 0x00 "MB12_32B_WORD6,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x280++0x03 line.long 0x00 "MB21_16B_WORD0,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x280++0x03 line.long 0x00 "MB32_8B_CS,Message Buffer 32 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x280++0x03 line.long 0x00 "MB7_64B_WORD0,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x284++0x03 line.long 0x00 "ID32,Message Buffer 32 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x284++0x03 line.long 0x00 "MB12_32B_WORD7,Message Buffer 12 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x284++0x03 line.long 0x00 "MB21_16B_WORD1,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x284++0x03 line.long 0x00 "MB32_8B_ID,Message Buffer 32 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x284++0x03 line.long 0x00 "MB7_64B_WORD1,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x288++0x03 line.long 0x00 "MB13_32B_CS,Message Buffer 13 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x288++0x03 line.long 0x00 "MB21_16B_WORD2,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x288++0x03 line.long 0x00 "MB32_8B_WORD0,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x288++0x03 line.long 0x00 "MB7_64B_WORD2,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x288++0x03 line.long 0x00 "WORD032,Message Buffer 32 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x28C++0x03 line.long 0x00 "MB13_32B_ID,Message Buffer 13 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x28C++0x03 line.long 0x00 "MB21_16B_WORD3,Message Buffer 21 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x28C++0x03 line.long 0x00 "MB32_8B_WORD1,Message Buffer 32 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x28C++0x03 line.long 0x00 "MB7_64B_WORD3,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x28C++0x03 line.long 0x00 "WORD132,Message Buffer 32 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x290++0x03 line.long 0x00 "CS33,Message Buffer 33 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x290++0x03 line.long 0x00 "MB13_32B_WORD0,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x290++0x03 line.long 0x00 "MB22_16B_CS,Message Buffer 22 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x290++0x03 line.long 0x00 "MB33_8B_CS,Message Buffer 33 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x290++0x03 line.long 0x00 "MB7_64B_WORD4,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x294++0x03 line.long 0x00 "ID33,Message Buffer 33 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x294++0x03 line.long 0x00 "MB13_32B_WORD1,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x294++0x03 line.long 0x00 "MB22_16B_ID,Message Buffer 22 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x294++0x03 line.long 0x00 "MB33_8B_ID,Message Buffer 33 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x294++0x03 line.long 0x00 "MB7_64B_WORD5,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x298++0x03 line.long 0x00 "MB13_32B_WORD2,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x298++0x03 line.long 0x00 "MB22_16B_WORD0,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x298++0x03 line.long 0x00 "MB33_8B_WORD0,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x298++0x03 line.long 0x00 "MB7_64B_WORD6,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x298++0x03 line.long 0x00 "WORD033,Message Buffer 33 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x29C++0x03 line.long 0x00 "MB13_32B_WORD3,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x29C++0x03 line.long 0x00 "MB22_16B_WORD1,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x29C++0x03 line.long 0x00 "MB33_8B_WORD1,Message Buffer 33 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x29C++0x03 line.long 0x00 "MB7_64B_WORD7,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x29C++0x03 line.long 0x00 "WORD133,Message Buffer 33 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2A0++0x03 line.long 0x00 "CS34,Message Buffer 34 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2A0++0x03 line.long 0x00 "MB13_32B_WORD4,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x2A0++0x03 line.long 0x00 "MB22_16B_WORD2,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2A0++0x03 line.long 0x00 "MB34_8B_CS,Message Buffer 34 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2A0++0x03 line.long 0x00 "MB7_64B_WORD8,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x2A4++0x03 line.long 0x00 "ID34,Message Buffer 34 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2A4++0x03 line.long 0x00 "MB13_32B_WORD5,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x2A4++0x03 line.long 0x00 "MB22_16B_WORD3,Message Buffer 22 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2A4++0x03 line.long 0x00 "MB34_8B_ID,Message Buffer 34 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2A4++0x03 line.long 0x00 "MB7_64B_WORD9,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x2A8++0x03 line.long 0x00 "MB13_32B_WORD6,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x2A8++0x03 line.long 0x00 "MB23_16B_CS,Message Buffer 23 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2A8++0x03 line.long 0x00 "MB34_8B_WORD0,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2A8++0x03 line.long 0x00 "MB7_64B_WORD10,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x2A8++0x03 line.long 0x00 "WORD034,Message Buffer 34 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2AC++0x03 line.long 0x00 "MB13_32B_WORD7,Message Buffer 13 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x2AC++0x03 line.long 0x00 "MB23_16B_ID,Message Buffer 23 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2AC++0x03 line.long 0x00 "MB34_8B_WORD1,Message Buffer 34 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2AC++0x03 line.long 0x00 "MB7_64B_WORD11,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x2AC++0x03 line.long 0x00 "WORD134,Message Buffer 34 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2B0++0x03 line.long 0x00 "CS35,Message Buffer 35 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2B0++0x03 line.long 0x00 "MB14_32B_CS,Message Buffer 14 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2B0++0x03 line.long 0x00 "MB23_16B_WORD0,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2B0++0x03 line.long 0x00 "MB35_8B_CS,Message Buffer 35 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2B0++0x03 line.long 0x00 "MB7_64B_WORD12,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x2B4++0x03 line.long 0x00 "ID35,Message Buffer 35 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2B4++0x03 line.long 0x00 "MB14_32B_ID,Message Buffer 14 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2B4++0x03 line.long 0x00 "MB23_16B_WORD1,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2B4++0x03 line.long 0x00 "MB35_8B_ID,Message Buffer 35 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2B4++0x03 line.long 0x00 "MB7_64B_WORD13,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x2B8++0x03 line.long 0x00 "MB14_32B_WORD0,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2B8++0x03 line.long 0x00 "MB23_16B_WORD2,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2B8++0x03 line.long 0x00 "MB35_8B_WORD0,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2B8++0x03 line.long 0x00 "MB7_64B_WORD14,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x2B8++0x03 line.long 0x00 "WORD035,Message Buffer 35 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2BC++0x03 line.long 0x00 "MB14_32B_WORD1,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2BC++0x03 line.long 0x00 "MB23_16B_WORD3,Message Buffer 23 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2BC++0x03 line.long 0x00 "MB35_8B_WORD1,Message Buffer 35 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2BC++0x03 line.long 0x00 "MB7_64B_WORD15,Message Buffer 7 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x2BC++0x03 line.long 0x00 "WORD135,Message Buffer 35 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2C0++0x03 line.long 0x00 "CS36,Message Buffer 36 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2C0++0x03 line.long 0x00 "MB14_32B_WORD2,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2C0++0x03 line.long 0x00 "MB24_16B_CS,Message Buffer 24 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2C0++0x03 line.long 0x00 "MB36_8B_CS,Message Buffer 36 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2C0++0x03 line.long 0x00 "MB8_64B_CS,Message Buffer 8 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2C4++0x03 line.long 0x00 "ID36,Message Buffer 36 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2C4++0x03 line.long 0x00 "MB14_32B_WORD3,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2C4++0x03 line.long 0x00 "MB24_16B_ID,Message Buffer 24 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2C4++0x03 line.long 0x00 "MB36_8B_ID,Message Buffer 36 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2C4++0x03 line.long 0x00 "MB8_64B_ID,Message Buffer 8 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2C8++0x03 line.long 0x00 "MB14_32B_WORD4,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x2C8++0x03 line.long 0x00 "MB24_16B_WORD0,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2C8++0x03 line.long 0x00 "MB36_8B_WORD0,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2C8++0x03 line.long 0x00 "MB8_64B_WORD0,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2C8++0x03 line.long 0x00 "WORD036,Message Buffer 36 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2CC++0x03 line.long 0x00 "MB14_32B_WORD5,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x2CC++0x03 line.long 0x00 "MB24_16B_WORD1,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2CC++0x03 line.long 0x00 "MB36_8B_WORD1,Message Buffer 36 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2CC++0x03 line.long 0x00 "MB8_64B_WORD1,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2CC++0x03 line.long 0x00 "WORD136,Message Buffer 36 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2D0++0x03 line.long 0x00 "CS37,Message Buffer 37 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2D0++0x03 line.long 0x00 "MB14_32B_WORD6,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x2D0++0x03 line.long 0x00 "MB24_16B_WORD2,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2D0++0x03 line.long 0x00 "MB37_8B_CS,Message Buffer 37 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2D0++0x03 line.long 0x00 "MB8_64B_WORD2,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2D4++0x03 line.long 0x00 "ID37,Message Buffer 37 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2D4++0x03 line.long 0x00 "MB14_32B_WORD7,Message Buffer 14 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x2D4++0x03 line.long 0x00 "MB24_16B_WORD3,Message Buffer 24 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2D4++0x03 line.long 0x00 "MB37_8B_ID,Message Buffer 37 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2D4++0x03 line.long 0x00 "MB8_64B_WORD3,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2D8++0x03 line.long 0x00 "MB15_32B_CS,Message Buffer 15 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2D8++0x03 line.long 0x00 "MB25_16B_CS,Message Buffer 25 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2D8++0x03 line.long 0x00 "MB37_8B_WORD0,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2D8++0x03 line.long 0x00 "MB8_64B_WORD4,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x2D8++0x03 line.long 0x00 "WORD037,Message Buffer 37 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2DC++0x03 line.long 0x00 "MB15_32B_ID,Message Buffer 15 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2DC++0x03 line.long 0x00 "MB25_16B_ID,Message Buffer 25 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2DC++0x03 line.long 0x00 "MB37_8B_WORD1,Message Buffer 37 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2DC++0x03 line.long 0x00 "MB8_64B_WORD5,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x2DC++0x03 line.long 0x00 "WORD137,Message Buffer 37 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2E0++0x03 line.long 0x00 "CS38,Message Buffer 38 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2E0++0x03 line.long 0x00 "MB15_32B_WORD0,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2E0++0x03 line.long 0x00 "MB25_16B_WORD0,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2E0++0x03 line.long 0x00 "MB38_8B_CS,Message Buffer 38 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2E0++0x03 line.long 0x00 "MB8_64B_WORD6,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x2E4++0x03 line.long 0x00 "ID38,Message Buffer 38 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2E4++0x03 line.long 0x00 "MB15_32B_WORD1,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2E4++0x03 line.long 0x00 "MB25_16B_WORD1,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2E4++0x03 line.long 0x00 "MB38_8B_ID,Message Buffer 38 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2E4++0x03 line.long 0x00 "MB8_64B_WORD7,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x2E8++0x03 line.long 0x00 "MB15_32B_WORD2,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2E8++0x03 line.long 0x00 "MB25_16B_WORD2,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x2E8++0x03 line.long 0x00 "MB38_8B_WORD0,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2E8++0x03 line.long 0x00 "MB8_64B_WORD8,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x2E8++0x03 line.long 0x00 "WORD038,Message Buffer 38 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2EC++0x03 line.long 0x00 "MB15_32B_WORD3,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2EC++0x03 line.long 0x00 "MB25_16B_WORD3,Message Buffer 25 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x2EC++0x03 line.long 0x00 "MB38_8B_WORD1,Message Buffer 38 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2EC++0x03 line.long 0x00 "MB8_64B_WORD9,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x2EC++0x03 line.long 0x00 "WORD138,Message Buffer 38 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2F0++0x03 line.long 0x00 "CS39,Message Buffer 39 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2F0++0x03 line.long 0x00 "MB15_32B_WORD4,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x2F0++0x03 line.long 0x00 "MB26_16B_CS,Message Buffer 26 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2F0++0x03 line.long 0x00 "MB39_8B_CS,Message Buffer 39 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x2F0++0x03 line.long 0x00 "MB8_64B_WORD10,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x2F4++0x03 line.long 0x00 "ID39,Message Buffer 39 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2F4++0x03 line.long 0x00 "MB15_32B_WORD5,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x2F4++0x03 line.long 0x00 "MB26_16B_ID,Message Buffer 26 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2F4++0x03 line.long 0x00 "MB39_8B_ID,Message Buffer 39 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x2F4++0x03 line.long 0x00 "MB8_64B_WORD11,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x2F8++0x03 line.long 0x00 "MB15_32B_WORD6,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x2F8++0x03 line.long 0x00 "MB26_16B_WORD0,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2F8++0x03 line.long 0x00 "MB39_8B_WORD0,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2F8++0x03 line.long 0x00 "MB8_64B_WORD12,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x2F8++0x03 line.long 0x00 "WORD039,Message Buffer 39 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x2FC++0x03 line.long 0x00 "MB15_32B_WORD7,Message Buffer 15 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x2FC++0x03 line.long 0x00 "MB26_16B_WORD1,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2FC++0x03 line.long 0x00 "MB39_8B_WORD1,Message Buffer 39 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x2FC++0x03 line.long 0x00 "MB8_64B_WORD13,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x2FC++0x03 line.long 0x00 "WORD139,Message Buffer 39 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x300++0x03 line.long 0x00 "CS40,Message Buffer 40 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x300++0x03 line.long 0x00 "MB16_32B_CS,Message Buffer 16 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x300++0x03 line.long 0x00 "MB26_16B_WORD2,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x300++0x03 line.long 0x00 "MB40_8B_CS,Message Buffer 40 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x300++0x03 line.long 0x00 "MB8_64B_WORD14,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x304++0x03 line.long 0x00 "ID40,Message Buffer 40 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x304++0x03 line.long 0x00 "MB16_32B_ID,Message Buffer 16 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x304++0x03 line.long 0x00 "MB26_16B_WORD3,Message Buffer 26 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x304++0x03 line.long 0x00 "MB40_8B_ID,Message Buffer 40 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x304++0x03 line.long 0x00 "MB8_64B_WORD15,Message Buffer 8 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x308++0x03 line.long 0x00 "MB16_32B_WORD0,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x308++0x03 line.long 0x00 "MB27_16B_CS,Message Buffer 27 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x308++0x03 line.long 0x00 "MB40_8B_WORD0,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x308++0x03 line.long 0x00 "MB9_64B_CS,Message Buffer 9 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x308++0x03 line.long 0x00 "WORD040,Message Buffer 40 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x30C++0x03 line.long 0x00 "MB16_32B_WORD1,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x30C++0x03 line.long 0x00 "MB27_16B_ID,Message Buffer 27 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x30C++0x03 line.long 0x00 "MB40_8B_WORD1,Message Buffer 40 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x30C++0x03 line.long 0x00 "MB9_64B_ID,Message Buffer 9 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x30C++0x03 line.long 0x00 "WORD140,Message Buffer 40 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x310++0x03 line.long 0x00 "CS41,Message Buffer 41 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x310++0x03 line.long 0x00 "MB16_32B_WORD2,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x310++0x03 line.long 0x00 "MB27_16B_WORD0,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x310++0x03 line.long 0x00 "MB41_8B_CS,Message Buffer 41 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x310++0x03 line.long 0x00 "MB9_64B_WORD0,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x314++0x03 line.long 0x00 "ID41,Message Buffer 41 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x314++0x03 line.long 0x00 "MB16_32B_WORD3,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x314++0x03 line.long 0x00 "MB27_16B_WORD1,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x314++0x03 line.long 0x00 "MB41_8B_ID,Message Buffer 41 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x314++0x03 line.long 0x00 "MB9_64B_WORD1,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x318++0x03 line.long 0x00 "MB16_32B_WORD4,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x318++0x03 line.long 0x00 "MB27_16B_WORD2,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x318++0x03 line.long 0x00 "MB41_8B_WORD0,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x318++0x03 line.long 0x00 "MB9_64B_WORD2,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x318++0x03 line.long 0x00 "WORD041,Message Buffer 41 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x31C++0x03 line.long 0x00 "MB16_32B_WORD5,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x31C++0x03 line.long 0x00 "MB27_16B_WORD3,Message Buffer 27 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x31C++0x03 line.long 0x00 "MB41_8B_WORD1,Message Buffer 41 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x31C++0x03 line.long 0x00 "MB9_64B_WORD3,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x31C++0x03 line.long 0x00 "WORD141,Message Buffer 41 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x320++0x03 line.long 0x00 "CS42,Message Buffer 42 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x320++0x03 line.long 0x00 "MB16_32B_WORD6,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x320++0x03 line.long 0x00 "MB28_16B_CS,Message Buffer 28 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x320++0x03 line.long 0x00 "MB42_8B_CS,Message Buffer 42 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x320++0x03 line.long 0x00 "MB9_64B_WORD4,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x324++0x03 line.long 0x00 "ID42,Message Buffer 42 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x324++0x03 line.long 0x00 "MB16_32B_WORD7,Message Buffer 16 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x324++0x03 line.long 0x00 "MB28_16B_ID,Message Buffer 28 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x324++0x03 line.long 0x00 "MB42_8B_ID,Message Buffer 42 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x324++0x03 line.long 0x00 "MB9_64B_WORD5,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x328++0x03 line.long 0x00 "MB17_32B_CS,Message Buffer 17 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x328++0x03 line.long 0x00 "MB28_16B_WORD0,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x328++0x03 line.long 0x00 "MB42_8B_WORD0,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x328++0x03 line.long 0x00 "MB9_64B_WORD6,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x328++0x03 line.long 0x00 "WORD042,Message Buffer 42 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x32C++0x03 line.long 0x00 "MB17_32B_ID,Message Buffer 17 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x32C++0x03 line.long 0x00 "MB28_16B_WORD1,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x32C++0x03 line.long 0x00 "MB42_8B_WORD1,Message Buffer 42 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x32C++0x03 line.long 0x00 "MB9_64B_WORD7,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x32C++0x03 line.long 0x00 "WORD142,Message Buffer 42 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x330++0x03 line.long 0x00 "CS43,Message Buffer 43 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x330++0x03 line.long 0x00 "MB17_32B_WORD0,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x330++0x03 line.long 0x00 "MB28_16B_WORD2,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x330++0x03 line.long 0x00 "MB43_8B_CS,Message Buffer 43 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x330++0x03 line.long 0x00 "MB9_64B_WORD8,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x334++0x03 line.long 0x00 "ID43,Message Buffer 43 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x334++0x03 line.long 0x00 "MB17_32B_WORD1,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x334++0x03 line.long 0x00 "MB28_16B_WORD3,Message Buffer 28 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x334++0x03 line.long 0x00 "MB43_8B_ID,Message Buffer 43 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x334++0x03 line.long 0x00 "MB9_64B_WORD9,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x338++0x03 line.long 0x00 "MB17_32B_WORD2,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x338++0x03 line.long 0x00 "MB29_16B_CS,Message Buffer 29 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x338++0x03 line.long 0x00 "MB43_8B_WORD0,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x338++0x03 line.long 0x00 "MB9_64B_WORD10,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x338++0x03 line.long 0x00 "WORD043,Message Buffer 43 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x33C++0x03 line.long 0x00 "MB17_32B_WORD3,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x33C++0x03 line.long 0x00 "MB29_16B_ID,Message Buffer 29 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x33C++0x03 line.long 0x00 "MB43_8B_WORD1,Message Buffer 43 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x33C++0x03 line.long 0x00 "MB9_64B_WORD11,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x33C++0x03 line.long 0x00 "WORD143,Message Buffer 43 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x340++0x03 line.long 0x00 "CS44,Message Buffer 44 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x340++0x03 line.long 0x00 "MB17_32B_WORD4,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x340++0x03 line.long 0x00 "MB29_16B_WORD0,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x340++0x03 line.long 0x00 "MB44_8B_CS,Message Buffer 44 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x340++0x03 line.long 0x00 "MB9_64B_WORD12,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x344++0x03 line.long 0x00 "ID44,Message Buffer 44 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x344++0x03 line.long 0x00 "MB17_32B_WORD5,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x344++0x03 line.long 0x00 "MB29_16B_WORD1,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x344++0x03 line.long 0x00 "MB44_8B_ID,Message Buffer 44 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x344++0x03 line.long 0x00 "MB9_64B_WORD13,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x348++0x03 line.long 0x00 "MB17_32B_WORD6,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x348++0x03 line.long 0x00 "MB29_16B_WORD2,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x348++0x03 line.long 0x00 "MB44_8B_WORD0,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x348++0x03 line.long 0x00 "MB9_64B_WORD14,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x348++0x03 line.long 0x00 "WORD044,Message Buffer 44 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x34C++0x03 line.long 0x00 "MB17_32B_WORD7,Message Buffer 17 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x34C++0x03 line.long 0x00 "MB29_16B_WORD3,Message Buffer 29 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x34C++0x03 line.long 0x00 "MB44_8B_WORD1,Message Buffer 44 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x34C++0x03 line.long 0x00 "MB9_64B_WORD15,Message Buffer 9 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x34C++0x03 line.long 0x00 "WORD144,Message Buffer 44 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x350++0x03 line.long 0x00 "CS45,Message Buffer 45 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x350++0x03 line.long 0x00 "MB10_64B_CS,Message Buffer 10 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x350++0x03 line.long 0x00 "MB18_32B_CS,Message Buffer 18 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x350++0x03 line.long 0x00 "MB30_16B_CS,Message Buffer 30 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x350++0x03 line.long 0x00 "MB45_8B_CS,Message Buffer 45 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x354++0x03 line.long 0x00 "ID45,Message Buffer 45 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x354++0x03 line.long 0x00 "MB10_64B_ID,Message Buffer 10 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x354++0x03 line.long 0x00 "MB18_32B_ID,Message Buffer 18 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x354++0x03 line.long 0x00 "MB30_16B_ID,Message Buffer 30 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x354++0x03 line.long 0x00 "MB45_8B_ID,Message Buffer 45 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x358++0x03 line.long 0x00 "MB10_64B_WORD0,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x358++0x03 line.long 0x00 "MB18_32B_WORD0,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x358++0x03 line.long 0x00 "MB30_16B_WORD0,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x358++0x03 line.long 0x00 "MB45_8B_WORD0,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x358++0x03 line.long 0x00 "WORD045,Message Buffer 45 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x35C++0x03 line.long 0x00 "MB10_64B_WORD1,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x35C++0x03 line.long 0x00 "MB18_32B_WORD1,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x35C++0x03 line.long 0x00 "MB30_16B_WORD1,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x35C++0x03 line.long 0x00 "MB45_8B_WORD1,Message Buffer 45 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x35C++0x03 line.long 0x00 "WORD145,Message Buffer 45 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x360++0x03 line.long 0x00 "CS46,Message Buffer 46 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x360++0x03 line.long 0x00 "MB10_64B_WORD2,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x360++0x03 line.long 0x00 "MB18_32B_WORD2,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x360++0x03 line.long 0x00 "MB30_16B_WORD2,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x360++0x03 line.long 0x00 "MB46_8B_CS,Message Buffer 46 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x364++0x03 line.long 0x00 "ID46,Message Buffer 46 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x364++0x03 line.long 0x00 "MB10_64B_WORD3,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x364++0x03 line.long 0x00 "MB18_32B_WORD3,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x364++0x03 line.long 0x00 "MB30_16B_WORD3,Message Buffer 30 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x364++0x03 line.long 0x00 "MB46_8B_ID,Message Buffer 46 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x368++0x03 line.long 0x00 "MB10_64B_WORD4,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x368++0x03 line.long 0x00 "MB18_32B_WORD4,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x368++0x03 line.long 0x00 "MB31_16B_CS,Message Buffer 31 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x368++0x03 line.long 0x00 "MB46_8B_WORD0,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x368++0x03 line.long 0x00 "WORD046,Message Buffer 46 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x36C++0x03 line.long 0x00 "MB10_64B_WORD5,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x36C++0x03 line.long 0x00 "MB18_32B_WORD5,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x36C++0x03 line.long 0x00 "MB31_16B_ID,Message Buffer 31 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x36C++0x03 line.long 0x00 "MB46_8B_WORD1,Message Buffer 46 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x36C++0x03 line.long 0x00 "WORD146,Message Buffer 46 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x370++0x03 line.long 0x00 "CS47,Message Buffer 47 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x370++0x03 line.long 0x00 "MB10_64B_WORD6,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x370++0x03 line.long 0x00 "MB18_32B_WORD6,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x370++0x03 line.long 0x00 "MB31_16B_WORD0,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x370++0x03 line.long 0x00 "MB47_8B_CS,Message Buffer 47 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x374++0x03 line.long 0x00 "ID47,Message Buffer 47 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x374++0x03 line.long 0x00 "MB10_64B_WORD7,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x374++0x03 line.long 0x00 "MB18_32B_WORD7,Message Buffer 18 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x374++0x03 line.long 0x00 "MB31_16B_WORD1,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x374++0x03 line.long 0x00 "MB47_8B_ID,Message Buffer 47 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x378++0x03 line.long 0x00 "MB10_64B_WORD8,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x378++0x03 line.long 0x00 "MB19_32B_CS,Message Buffer 19 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x378++0x03 line.long 0x00 "MB31_16B_WORD2,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x378++0x03 line.long 0x00 "MB47_8B_WORD0,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x378++0x03 line.long 0x00 "WORD047,Message Buffer 47 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x37C++0x03 line.long 0x00 "MB10_64B_WORD9,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x37C++0x03 line.long 0x00 "MB19_32B_ID,Message Buffer 19 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x37C++0x03 line.long 0x00 "MB31_16B_WORD3,Message Buffer 31 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x37C++0x03 line.long 0x00 "MB47_8B_WORD1,Message Buffer 47 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x37C++0x03 line.long 0x00 "WORD147,Message Buffer 47 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x380++0x03 line.long 0x00 "CS48,Message Buffer 48 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x380++0x03 line.long 0x00 "MB10_64B_WORD10,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x380++0x03 line.long 0x00 "MB19_32B_WORD0,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x380++0x03 line.long 0x00 "MB32_16B_CS,Message Buffer 32 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x380++0x03 line.long 0x00 "MB48_8B_CS,Message Buffer 48 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x384++0x03 line.long 0x00 "ID48,Message Buffer 48 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x384++0x03 line.long 0x00 "MB10_64B_WORD11,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x384++0x03 line.long 0x00 "MB19_32B_WORD1,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x384++0x03 line.long 0x00 "MB32_16B_ID,Message Buffer 32 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x384++0x03 line.long 0x00 "MB48_8B_ID,Message Buffer 48 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x388++0x03 line.long 0x00 "MB10_64B_WORD12,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x388++0x03 line.long 0x00 "MB19_32B_WORD2,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x388++0x03 line.long 0x00 "MB32_16B_WORD0,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x388++0x03 line.long 0x00 "MB48_8B_WORD0,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x388++0x03 line.long 0x00 "WORD048,Message Buffer 48 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x38C++0x03 line.long 0x00 "MB10_64B_WORD13,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x38C++0x03 line.long 0x00 "MB19_32B_WORD3,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x38C++0x03 line.long 0x00 "MB32_16B_WORD1,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x38C++0x03 line.long 0x00 "MB48_8B_WORD1,Message Buffer 48 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x38C++0x03 line.long 0x00 "WORD148,Message Buffer 48 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x390++0x03 line.long 0x00 "CS49,Message Buffer 49 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x390++0x03 line.long 0x00 "MB10_64B_WORD14,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x390++0x03 line.long 0x00 "MB19_32B_WORD4,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x390++0x03 line.long 0x00 "MB32_16B_WORD2,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x390++0x03 line.long 0x00 "MB49_8B_CS,Message Buffer 49 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x394++0x03 line.long 0x00 "ID49,Message Buffer 49 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x394++0x03 line.long 0x00 "MB10_64B_WORD15,Message Buffer 10 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x394++0x03 line.long 0x00 "MB19_32B_WORD5,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x394++0x03 line.long 0x00 "MB32_16B_WORD3,Message Buffer 32 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x394++0x03 line.long 0x00 "MB49_8B_ID,Message Buffer 49 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x398++0x03 line.long 0x00 "MB11_64B_CS,Message Buffer 11 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x398++0x03 line.long 0x00 "MB19_32B_WORD6,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x398++0x03 line.long 0x00 "MB33_16B_CS,Message Buffer 33 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x398++0x03 line.long 0x00 "MB49_8B_WORD0,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x398++0x03 line.long 0x00 "WORD049,Message Buffer 49 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x39C++0x03 line.long 0x00 "MB11_64B_ID,Message Buffer 11 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x39C++0x03 line.long 0x00 "MB19_32B_WORD7,Message Buffer 19 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x39C++0x03 line.long 0x00 "MB33_16B_ID,Message Buffer 33 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x39C++0x03 line.long 0x00 "MB49_8B_WORD1,Message Buffer 49 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x39C++0x03 line.long 0x00 "WORD149,Message Buffer 49 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3A0++0x03 line.long 0x00 "CS50,Message Buffer 50 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3A0++0x03 line.long 0x00 "MB11_64B_WORD0,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3A0++0x03 line.long 0x00 "MB20_32B_CS,Message Buffer 20 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3A0++0x03 line.long 0x00 "MB33_16B_WORD0,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3A0++0x03 line.long 0x00 "MB50_8B_CS,Message Buffer 50 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3A4++0x03 line.long 0x00 "ID50,Message Buffer 50 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3A4++0x03 line.long 0x00 "MB11_64B_WORD1,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3A4++0x03 line.long 0x00 "MB20_32B_ID,Message Buffer 20 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3A4++0x03 line.long 0x00 "MB33_16B_WORD1,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3A4++0x03 line.long 0x00 "MB50_8B_ID,Message Buffer 50 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3A8++0x03 line.long 0x00 "MB11_64B_WORD2,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3A8++0x03 line.long 0x00 "MB20_32B_WORD0,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3A8++0x03 line.long 0x00 "MB33_16B_WORD2,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3A8++0x03 line.long 0x00 "MB50_8B_WORD0,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3A8++0x03 line.long 0x00 "WORD050,Message Buffer 50 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3AC++0x03 line.long 0x00 "MB11_64B_WORD3,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3AC++0x03 line.long 0x00 "MB20_32B_WORD1,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3AC++0x03 line.long 0x00 "MB33_16B_WORD3,Message Buffer 33 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3AC++0x03 line.long 0x00 "MB50_8B_WORD1,Message Buffer 50 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3AC++0x03 line.long 0x00 "WORD150,Message Buffer 50 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3B0++0x03 line.long 0x00 "CS51,Message Buffer 51 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3B0++0x03 line.long 0x00 "MB11_64B_WORD4,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x3B0++0x03 line.long 0x00 "MB20_32B_WORD2,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3B0++0x03 line.long 0x00 "MB34_16B_CS,Message Buffer 34 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3B0++0x03 line.long 0x00 "MB51_8B_CS,Message Buffer 51 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3B4++0x03 line.long 0x00 "ID51,Message Buffer 51 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3B4++0x03 line.long 0x00 "MB11_64B_WORD5,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x3B4++0x03 line.long 0x00 "MB20_32B_WORD3,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3B4++0x03 line.long 0x00 "MB34_16B_ID,Message Buffer 34 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3B4++0x03 line.long 0x00 "MB51_8B_ID,Message Buffer 51 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3B8++0x03 line.long 0x00 "MB11_64B_WORD6,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x3B8++0x03 line.long 0x00 "MB20_32B_WORD4,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x3B8++0x03 line.long 0x00 "MB34_16B_WORD0,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3B8++0x03 line.long 0x00 "MB51_8B_WORD0,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3B8++0x03 line.long 0x00 "WORD051,Message Buffer 51 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3BC++0x03 line.long 0x00 "MB11_64B_WORD7,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x3BC++0x03 line.long 0x00 "MB20_32B_WORD5,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x3BC++0x03 line.long 0x00 "MB34_16B_WORD1,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3BC++0x03 line.long 0x00 "MB51_8B_WORD1,Message Buffer 51 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3BC++0x03 line.long 0x00 "WORD151,Message Buffer 51 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3C0++0x03 line.long 0x00 "CS52,Message Buffer 52 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3C0++0x03 line.long 0x00 "MB11_64B_WORD8,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x3C0++0x03 line.long 0x00 "MB20_32B_WORD6,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x3C0++0x03 line.long 0x00 "MB34_16B_WORD2,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3C0++0x03 line.long 0x00 "MB52_8B_CS,Message Buffer 52 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3C4++0x03 line.long 0x00 "ID52,Message Buffer 52 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3C4++0x03 line.long 0x00 "MB11_64B_WORD9,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x3C4++0x03 line.long 0x00 "MB20_32B_WORD7,Message Buffer 20 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x3C4++0x03 line.long 0x00 "MB34_16B_WORD3,Message Buffer 34 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3C4++0x03 line.long 0x00 "MB52_8B_ID,Message Buffer 52 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3C8++0x03 line.long 0x00 "MB11_64B_WORD10,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x3C8++0x03 line.long 0x00 "MB21_32B_CS,Message Buffer 21 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3C8++0x03 line.long 0x00 "MB35_16B_CS,Message Buffer 35 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3C8++0x03 line.long 0x00 "MB52_8B_WORD0,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3C8++0x03 line.long 0x00 "WORD052,Message Buffer 52 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3CC++0x03 line.long 0x00 "MB11_64B_WORD11,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x3CC++0x03 line.long 0x00 "MB21_32B_ID,Message Buffer 21 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3CC++0x03 line.long 0x00 "MB35_16B_ID,Message Buffer 35 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3CC++0x03 line.long 0x00 "MB52_8B_WORD1,Message Buffer 52 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3CC++0x03 line.long 0x00 "WORD152,Message Buffer 52 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3D0++0x03 line.long 0x00 "CS53,Message Buffer 53 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3D0++0x03 line.long 0x00 "MB11_64B_WORD12,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x3D0++0x03 line.long 0x00 "MB21_32B_WORD0,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3D0++0x03 line.long 0x00 "MB35_16B_WORD0,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3D0++0x03 line.long 0x00 "MB53_8B_CS,Message Buffer 53 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3D4++0x03 line.long 0x00 "ID53,Message Buffer 53 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3D4++0x03 line.long 0x00 "MB11_64B_WORD13,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x3D4++0x03 line.long 0x00 "MB21_32B_WORD1,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3D4++0x03 line.long 0x00 "MB35_16B_WORD1,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3D4++0x03 line.long 0x00 "MB53_8B_ID,Message Buffer 53 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3D8++0x03 line.long 0x00 "MB11_64B_WORD14,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x3D8++0x03 line.long 0x00 "MB21_32B_WORD2,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3D8++0x03 line.long 0x00 "MB35_16B_WORD2,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3D8++0x03 line.long 0x00 "MB53_8B_WORD0,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3D8++0x03 line.long 0x00 "WORD053,Message Buffer 53 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3DC++0x03 line.long 0x00 "MB11_64B_WORD15,Message Buffer 11 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x3DC++0x03 line.long 0x00 "MB21_32B_WORD3,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3DC++0x03 line.long 0x00 "MB35_16B_WORD3,Message Buffer 35 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3DC++0x03 line.long 0x00 "MB53_8B_WORD1,Message Buffer 53 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3DC++0x03 line.long 0x00 "WORD153,Message Buffer 53 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3E0++0x03 line.long 0x00 "CS54,Message Buffer 54 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3E0++0x03 line.long 0x00 "MB12_64B_CS,Message Buffer 12 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3E0++0x03 line.long 0x00 "MB21_32B_WORD4,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x3E0++0x03 line.long 0x00 "MB36_16B_CS,Message Buffer 36 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3E0++0x03 line.long 0x00 "MB54_8B_CS,Message Buffer 54 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3E4++0x03 line.long 0x00 "ID54,Message Buffer 54 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3E4++0x03 line.long 0x00 "MB12_64B_ID,Message Buffer 12 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3E4++0x03 line.long 0x00 "MB21_32B_WORD5,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x3E4++0x03 line.long 0x00 "MB36_16B_ID,Message Buffer 36 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3E4++0x03 line.long 0x00 "MB54_8B_ID,Message Buffer 54 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3E8++0x03 line.long 0x00 "MB12_64B_WORD0,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3E8++0x03 line.long 0x00 "MB21_32B_WORD6,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x3E8++0x03 line.long 0x00 "MB36_16B_WORD0,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3E8++0x03 line.long 0x00 "MB54_8B_WORD0,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3E8++0x03 line.long 0x00 "WORD054,Message Buffer 54 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3EC++0x03 line.long 0x00 "MB12_64B_WORD1,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3EC++0x03 line.long 0x00 "MB21_32B_WORD7,Message Buffer 21 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x3EC++0x03 line.long 0x00 "MB36_16B_WORD1,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3EC++0x03 line.long 0x00 "MB54_8B_WORD1,Message Buffer 54 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3EC++0x03 line.long 0x00 "WORD154,Message Buffer 54 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3F0++0x03 line.long 0x00 "CS55,Message Buffer 55 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3F0++0x03 line.long 0x00 "MB12_64B_WORD2,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3F0++0x03 line.long 0x00 "MB22_32B_CS,Message Buffer 22 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3F0++0x03 line.long 0x00 "MB36_16B_WORD2,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x3F0++0x03 line.long 0x00 "MB55_8B_CS,Message Buffer 55 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3F4++0x03 line.long 0x00 "ID55,Message Buffer 55 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3F4++0x03 line.long 0x00 "MB12_64B_WORD3,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3F4++0x03 line.long 0x00 "MB22_32B_ID,Message Buffer 22 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3F4++0x03 line.long 0x00 "MB36_16B_WORD3,Message Buffer 36 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x3F4++0x03 line.long 0x00 "MB55_8B_ID,Message Buffer 55 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3F8++0x03 line.long 0x00 "MB12_64B_WORD4,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x3F8++0x03 line.long 0x00 "MB22_32B_WORD0,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3F8++0x03 line.long 0x00 "MB37_16B_CS,Message Buffer 37 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x3F8++0x03 line.long 0x00 "MB55_8B_WORD0,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3F8++0x03 line.long 0x00 "WORD055,Message Buffer 55 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x3FC++0x03 line.long 0x00 "MB12_64B_WORD5,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x3FC++0x03 line.long 0x00 "MB22_32B_WORD1,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3FC++0x03 line.long 0x00 "MB37_16B_ID,Message Buffer 37 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x3FC++0x03 line.long 0x00 "MB55_8B_WORD1,Message Buffer 55 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x3FC++0x03 line.long 0x00 "WORD155,Message Buffer 55 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x400++0x03 line.long 0x00 "CS56,Message Buffer 56 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x400++0x03 line.long 0x00 "MB12_64B_WORD6,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x400++0x03 line.long 0x00 "MB22_32B_WORD2,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x400++0x03 line.long 0x00 "MB37_16B_WORD0,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x400++0x03 line.long 0x00 "MB56_8B_CS,Message Buffer 56 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x404++0x03 line.long 0x00 "ID56,Message Buffer 56 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x404++0x03 line.long 0x00 "MB12_64B_WORD7,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x404++0x03 line.long 0x00 "MB22_32B_WORD3,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x404++0x03 line.long 0x00 "MB37_16B_WORD1,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x404++0x03 line.long 0x00 "MB56_8B_ID,Message Buffer 56 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x408++0x03 line.long 0x00 "MB12_64B_WORD8,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x408++0x03 line.long 0x00 "MB22_32B_WORD4,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x408++0x03 line.long 0x00 "MB37_16B_WORD2,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x408++0x03 line.long 0x00 "MB56_8B_WORD0,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x408++0x03 line.long 0x00 "WORD056,Message Buffer 56 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x40C++0x03 line.long 0x00 "MB12_64B_WORD9,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x40C++0x03 line.long 0x00 "MB22_32B_WORD5,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x40C++0x03 line.long 0x00 "MB37_16B_WORD3,Message Buffer 37 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x40C++0x03 line.long 0x00 "MB56_8B_WORD1,Message Buffer 56 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x40C++0x03 line.long 0x00 "WORD156,Message Buffer 56 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x410++0x03 line.long 0x00 "CS57,Message Buffer 57 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x410++0x03 line.long 0x00 "MB12_64B_WORD10,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x410++0x03 line.long 0x00 "MB22_32B_WORD6,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x410++0x03 line.long 0x00 "MB38_16B_CS,Message Buffer 38 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x410++0x03 line.long 0x00 "MB57_8B_CS,Message Buffer 57 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x414++0x03 line.long 0x00 "ID57,Message Buffer 57 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x414++0x03 line.long 0x00 "MB12_64B_WORD11,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x414++0x03 line.long 0x00 "MB22_32B_WORD7,Message Buffer 22 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x414++0x03 line.long 0x00 "MB38_16B_ID,Message Buffer 38 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x414++0x03 line.long 0x00 "MB57_8B_ID,Message Buffer 57 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x418++0x03 line.long 0x00 "MB12_64B_WORD12,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x418++0x03 line.long 0x00 "MB23_32B_CS,Message Buffer 23 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x418++0x03 line.long 0x00 "MB38_16B_WORD0,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x418++0x03 line.long 0x00 "MB57_8B_WORD0,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x418++0x03 line.long 0x00 "WORD057,Message Buffer 57 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x41C++0x03 line.long 0x00 "MB12_64B_WORD13,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x41C++0x03 line.long 0x00 "MB23_32B_ID,Message Buffer 23 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x41C++0x03 line.long 0x00 "MB38_16B_WORD1,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x41C++0x03 line.long 0x00 "MB57_8B_WORD1,Message Buffer 57 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x41C++0x03 line.long 0x00 "WORD157,Message Buffer 57 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x420++0x03 line.long 0x00 "CS58,Message Buffer 58 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x420++0x03 line.long 0x00 "MB12_64B_WORD14,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x420++0x03 line.long 0x00 "MB23_32B_WORD0,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x420++0x03 line.long 0x00 "MB38_16B_WORD2,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x420++0x03 line.long 0x00 "MB58_8B_CS,Message Buffer 58 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x424++0x03 line.long 0x00 "ID58,Message Buffer 58 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x424++0x03 line.long 0x00 "MB12_64B_WORD15,Message Buffer 12 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x424++0x03 line.long 0x00 "MB23_32B_WORD1,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x424++0x03 line.long 0x00 "MB38_16B_WORD3,Message Buffer 38 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x424++0x03 line.long 0x00 "MB58_8B_ID,Message Buffer 58 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x428++0x03 line.long 0x00 "MB13_64B_CS,Message Buffer 13 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x428++0x03 line.long 0x00 "MB23_32B_WORD2,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x428++0x03 line.long 0x00 "MB39_16B_CS,Message Buffer 39 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x428++0x03 line.long 0x00 "MB58_8B_WORD0,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x428++0x03 line.long 0x00 "WORD058,Message Buffer 58 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x42C++0x03 line.long 0x00 "MB13_64B_ID,Message Buffer 13 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x42C++0x03 line.long 0x00 "MB23_32B_WORD3,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x42C++0x03 line.long 0x00 "MB39_16B_ID,Message Buffer 39 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x42C++0x03 line.long 0x00 "MB58_8B_WORD1,Message Buffer 58 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x42C++0x03 line.long 0x00 "WORD158,Message Buffer 58 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x430++0x03 line.long 0x00 "CS59,Message Buffer 59 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x430++0x03 line.long 0x00 "MB13_64B_WORD0,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x430++0x03 line.long 0x00 "MB23_32B_WORD4,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x430++0x03 line.long 0x00 "MB39_16B_WORD0,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x430++0x03 line.long 0x00 "MB59_8B_CS,Message Buffer 59 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x434++0x03 line.long 0x00 "ID59,Message Buffer 59 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x434++0x03 line.long 0x00 "MB13_64B_WORD1,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x434++0x03 line.long 0x00 "MB23_32B_WORD5,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x434++0x03 line.long 0x00 "MB39_16B_WORD1,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x434++0x03 line.long 0x00 "MB59_8B_ID,Message Buffer 59 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x438++0x03 line.long 0x00 "MB13_64B_WORD2,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x438++0x03 line.long 0x00 "MB23_32B_WORD6,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x438++0x03 line.long 0x00 "MB39_16B_WORD2,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x438++0x03 line.long 0x00 "MB59_8B_WORD0,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x438++0x03 line.long 0x00 "WORD059,Message Buffer 59 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x43C++0x03 line.long 0x00 "MB13_64B_WORD3,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x43C++0x03 line.long 0x00 "MB23_32B_WORD7,Message Buffer 23 WORD_32B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x43C++0x03 line.long 0x00 "MB39_16B_WORD3,Message Buffer 39 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x43C++0x03 line.long 0x00 "MB59_8B_WORD1,Message Buffer 59 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x43C++0x03 line.long 0x00 "WORD159,Message Buffer 59 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x440++0x03 line.long 0x00 "CS60,Message Buffer 60 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x440++0x03 line.long 0x00 "MB13_64B_WORD4,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_16,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_17,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_18,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_19,Data byte 0 of Rx/Tx frame" group.long 0x440++0x03 line.long 0x00 "MB40_16B_CS,Message Buffer 40 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x440++0x03 line.long 0x00 "MB60_8B_CS,Message Buffer 60 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x444++0x03 line.long 0x00 "ID60,Message Buffer 60 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x444++0x03 line.long 0x00 "MB13_64B_WORD5,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_20,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_21,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_22,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_23,Data byte 0 of Rx/Tx frame" group.long 0x444++0x03 line.long 0x00 "MB40_16B_ID,Message Buffer 40 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x444++0x03 line.long 0x00 "MB60_8B_ID,Message Buffer 60 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x448++0x03 line.long 0x00 "MB13_64B_WORD6,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_24,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_25,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_26,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_27,Data byte 0 of Rx/Tx frame" group.long 0x448++0x03 line.long 0x00 "MB40_16B_WORD0,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x448++0x03 line.long 0x00 "MB60_8B_WORD0,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x448++0x03 line.long 0x00 "WORD060,Message Buffer 60 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x44C++0x03 line.long 0x00 "MB13_64B_WORD7,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_28,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_29,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_30,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_31,Data byte 0 of Rx/Tx frame" group.long 0x44C++0x03 line.long 0x00 "MB40_16B_WORD1,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x44C++0x03 line.long 0x00 "MB60_8B_WORD1,Message Buffer 60 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x44C++0x03 line.long 0x00 "WORD160,Message Buffer 60 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x450++0x03 line.long 0x00 "CS61,Message Buffer 61 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x450++0x03 line.long 0x00 "MB13_64B_WORD8,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_32,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_33,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_34,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_35,Data byte 0 of Rx/Tx frame" group.long 0x450++0x03 line.long 0x00 "MB40_16B_WORD2,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x450++0x03 line.long 0x00 "MB61_8B_CS,Message Buffer 61 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x454++0x03 line.long 0x00 "ID61,Message Buffer 61 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x454++0x03 line.long 0x00 "MB13_64B_WORD9,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_36,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_37,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_38,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_39,Data byte 0 of Rx/Tx frame" group.long 0x454++0x03 line.long 0x00 "MB40_16B_WORD3,Message Buffer 40 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x454++0x03 line.long 0x00 "MB61_8B_ID,Message Buffer 61 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x458++0x03 line.long 0x00 "MB13_64B_WORD10,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_40,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_41,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_42,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_43,Data byte 0 of Rx/Tx frame" group.long 0x458++0x03 line.long 0x00 "MB41_16B_CS,Message Buffer 41 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x458++0x03 line.long 0x00 "MB61_8B_WORD0,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x458++0x03 line.long 0x00 "WORD061,Message Buffer 61 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x45C++0x03 line.long 0x00 "MB13_64B_WORD11,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_44,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_45,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_46,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_47,Data byte 0 of Rx/Tx frame" group.long 0x45C++0x03 line.long 0x00 "MB41_16B_ID,Message Buffer 41 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x45C++0x03 line.long 0x00 "MB61_8B_WORD1,Message Buffer 61 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x45C++0x03 line.long 0x00 "WORD161,Message Buffer 61 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x460++0x03 line.long 0x00 "CS62,Message Buffer 62 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x460++0x03 line.long 0x00 "MB13_64B_WORD12,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_48,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_49,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_50,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_51,Data byte 0 of Rx/Tx frame" group.long 0x460++0x03 line.long 0x00 "MB41_16B_WORD0,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x460++0x03 line.long 0x00 "MB62_8B_CS,Message Buffer 62 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x464++0x03 line.long 0x00 "ID62,Message Buffer 62 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x464++0x03 line.long 0x00 "MB13_64B_WORD13,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_52,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_53,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_54,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_55,Data byte 0 of Rx/Tx frame" group.long 0x464++0x03 line.long 0x00 "MB41_16B_WORD1,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x464++0x03 line.long 0x00 "MB62_8B_ID,Message Buffer 62 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x468++0x03 line.long 0x00 "MB13_64B_WORD14,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_56,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_57,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_58,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_59,Data byte 0 of Rx/Tx frame" group.long 0x468++0x03 line.long 0x00 "MB41_16B_WORD2,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_8,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_9,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_10,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_11,Data byte 0 of Rx/Tx frame" group.long 0x468++0x03 line.long 0x00 "MB62_8B_WORD0,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x468++0x03 line.long 0x00 "WORD062,Message Buffer 62 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x46C++0x03 line.long 0x00 "MB13_64B_WORD15,Message Buffer 13 WORD_64B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_60,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_61,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_62,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_63,Data byte 0 of Rx/Tx frame" group.long 0x46C++0x03 line.long 0x00 "MB41_16B_WORD3,Message Buffer 41 WORD_16B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_12,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_13,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_14,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_15,Data byte 0 of Rx/Tx frame" group.long 0x46C++0x03 line.long 0x00 "MB62_8B_WORD1,Message Buffer 62 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x46C++0x03 line.long 0x00 "WORD162,Message Buffer 62 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x470++0x03 line.long 0x00 "CS63,Message Buffer 63 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x470++0x03 line.long 0x00 "MB63_8B_CS,Message Buffer 63 CS Register" bitfld.long 0x00 31. "EDL,Extended Data Length" "0,1" bitfld.long 0x00 30. "BRS,Bit Rate Switch" "0,1" newline bitfld.long 0x00 29. "ESI,Error State Indicator" "0,1" bitfld.long 0x00 24.--27. "CODE,Message Buffer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended" "0,1" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request" "0,1" bitfld.long 0x00 16.--19. "DLC,Length of the data to be stored/transmitted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "TIME_STAMP,Free-Running Counter Time stamp" group.long 0x474++0x03 line.long 0x00 "ID63,Message Buffer 63 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x474++0x03 line.long 0x00 "MB63_8B_ID,Message Buffer 63 ID Register" bitfld.long 0x00 29.--31. "PRIO,Local priority" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 18.--28. 1. "STD,Contains standard/extended (HIGH word) identifier of message buffer" newline hexmask.long.tbyte 0x00 0.--17. 1. "EXT,Contains extended (LOW word) identifier of message buffer" group.long 0x478++0x03 line.long 0x00 "MB63_8B_WORD0,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x478++0x03 line.long 0x00 "WORD063,Message Buffer 63 WORD0 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_0,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_1,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_2,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_3,Data byte 0 of Rx/Tx frame" group.long 0x47C++0x03 line.long 0x00 "MB63_8B_WORD1,Message Buffer 63 WORD_8B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" group.long 0x47C++0x03 line.long 0x00 "WORD163,Message Buffer 63 WORD1 Register" hexmask.long.byte 0x00 24.--31. 1. "DATA_BYTE_4,Data byte 3 of Rx/Tx frame" hexmask.long.byte 0x00 16.--23. 1. "DATA_BYTE_5,Data byte 2 of Rx/Tx frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA_BYTE_6,Data byte 1 of Rx/Tx frame" hexmask.long.byte 0x00 0.--7. 1. "DATA_BYTE_7,Data byte 0 of Rx/Tx frame" repeat 64. (increment 0 1) (increment 0 0x04) group.long ($2+0x880)++0x03 line.long 0x00 "RXIMR[$1],Rx Individual Mask Registers $1" hexmask.long 0x00 0.--31. 1. "MI,Individual Mask Bits" repeat.end group.long 0xB00++0x03 line.long 0x00 "CTRL1_PN,Pretended Networking Control 1 Register" bitfld.long 0x00 17. "WTOF_MSK,Wake Up by Timeout Flag Mask Bit" "0: Timeout wakeup event is disabled,1: Timeout wakeup event is enabled" bitfld.long 0x00 16. "WUMF_MSK,Wake Up by Match Flag Mask Bit" "0: Wakeup match event is disabled,1: Wakeup match event is enabled" newline hexmask.long.byte 0x00 8.--15. 1. "NMATCH,Number of Messages Matching the Same Filtering Criteria" bitfld.long 0x00 4.--5. "PLFS,Payload Filtering Selection" "0: Match upon a payload contents against an..,1: Match upon a payload value greater than or..,2: Match upon a payload value smaller than or..,3: Match upon a payload value inside a range.." newline bitfld.long 0x00 2.--3. "IDFS,ID Filtering Selection" "0: Match upon ID contents against an exact..,1: Match upon an ID value greater than or equal..,2: Match upon an ID value smaller than or equal..,3: Match upon an ID value inside a range greater.." bitfld.long 0x00 0.--1. "FCS,Filtering Combination Selection" "0: Message ID filtering only,1: Message ID filtering and payload filtering,2: Message ID filtering occurring a specified..,3: Message ID filtering and payload filtering a.." group.long 0xB04++0x03 line.long 0x00 "CTRL2_PN,Pretended Networking Control 2 Register" hexmask.long.word 0x00 0.--15. 1. "MATCHTO,Timeout for No Message Matching the Filtering Criteria" group.long 0xB08++0x03 line.long 0x00 "WU_MTC,Pretended Networking Wake Up Match Register" eventfld.long 0x00 17. "WTOF,Wake Up by Timeout Flag Bit" "0: No wakeup by timeout event detected,1: Wakeup by timeout event detected" eventfld.long 0x00 16. "WUMF,Wake Up by Match Flag Bit" "0: No wakeup by match event detected,1: Wakeup by match event detected" newline hexmask.long.byte 0x00 8.--15. 1. "MCOUNTER,Number of Matches when in Pretended Networking" group.long 0xB0C++0x03 line.long 0x00 "FLT_ID1,Pretended Networking ID Filter 1 Register" bitfld.long 0x00 30. "FLT_IDE,ID Extended Filter" "0: Accept standard frame format,1: Accept extended frame format" bitfld.long 0x00 29. "FLT_RTR,Remote Transmission Request Filter" "0: Reject remote frame (accept data frame),1: Accept remote frame" newline hexmask.long 0x00 0.--28. 1. "FLT_ID1,ID Filter 1 for Pretended Networking filtering" group.long 0xB10++0x03 line.long 0x00 "FLT_DLC,Pretended Networking DLC Filter Register" bitfld.long 0x00 16.--19. "FLT_DLC_LO,Lower Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "FLT_DLC_HI,Upper Limit for Length of Data Bytes Filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB14++0x03 line.long 0x00 "PL1_LO,Pretended Networking Payload Low Filter 1 Register" hexmask.long.byte 0x00 24.--31. 1. "Data_byte_0,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 0" hexmask.long.byte 0x00 16.--23. 1. "Data_byte_1,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 1" newline hexmask.long.byte 0x00 8.--15. 1. "Data_byte_2,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 2" hexmask.long.byte 0x00 0.--7. 1. "Data_byte_3,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 3" group.long 0xB18++0x03 line.long 0x00 "PL1_HI,Pretended Networking Payload High Filter 1 Register" hexmask.long.byte 0x00 24.--31. 1. "Data_byte_4,Payload Filter 1 high order bits for Pretended Networking payload filtering corresponding to data byte 4" hexmask.long.byte 0x00 16.--23. 1. "Data_byte_5,Payload Filter 1 high order bits for Pretended Networking payload filtering corresponding to data byte 5" newline hexmask.long.byte 0x00 8.--15. 1. "Data_byte_6,Payload Filter 1 high order bits for Pretended Networking payload filtering corresponding to data byte 6" hexmask.long.byte 0x00 0.--7. 1. "Data_byte_7,Payload Filter 1 high order bits for Pretended Networking payload filtering corresponding to data byte 7" group.long 0xB1C++0x03 line.long 0x00 "FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register" bitfld.long 0x00 30. "IDE_MSK,ID Extended Mask Bit" "0: The corresponding bit in the filter is don't..,1: The corresponding bit in the filter is checked" bitfld.long 0x00 29. "RTR_MSK,Remote Transmission Request Mask Bit" "0: The corresponding bit in the filter is don't..,1: The corresponding bit in the filter is checked" newline hexmask.long 0x00 0.--28. 1. "FLT_ID2_IDMASK,ID Filter 2 for Pretended Networking Filtering / ID Mask Bits for Pretended Networking ID Filtering" group.long 0xB20++0x03 line.long 0x00 "PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask register" hexmask.long.byte 0x00 24.--31. 1. "Data_byte_0,Payload Filter 2 low order bits / Payload Mask low order bits for Pretended Networking payload filtering corresponding to the data byte 0" hexmask.long.byte 0x00 16.--23. 1. "Data_byte_1,Payload Filter 2 low order bits / Payload Mask low order bits for Pretended Networking payload filtering corresponding to the data byte 1" newline hexmask.long.byte 0x00 8.--15. 1. "Data_byte_2,Payload Filter 2 low order bits / Payload Mask low order bits for Pretended Networking payload filtering corresponding to the data byte 2" hexmask.long.byte 0x00 0.--7. 1. "Data_byte_3,Payload Filter 2 low order bits / Payload Mask low order bits for Pretended Networking payload filtering corresponding to the data byte 3" group.long 0xB24++0x03 line.long 0x00 "PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 low order bits / Payload High Mask register" hexmask.long.byte 0x00 24.--31. 1. "Data_byte_4,Payload Filter 2 high order bits / Payload Mask high order bits for Pretended Networking payload filtering corresponding to the data byte 4" hexmask.long.byte 0x00 16.--23. 1. "Data_byte_5,Payload Filter 2 high order bits / Payload Mask high order bits for Pretended Networking payload filtering corresponding to the data byte 5" newline hexmask.long.byte 0x00 8.--15. 1. "Data_byte_6,Payload Filter 2 high order bits / Payload Mask high order bits for Pretended Networking payload filtering corresponding to the data byte 6" hexmask.long.byte 0x00 0.--7. 1. "Data_byte_7,Payload Filter 2 high order bits / Payload Mask high order bits for Pretended Networking payload filtering corresponding to the data byte 7" group.long 0xBF0++0x03 line.long 0x00 "EPRS,Enhanced CAN Bit Timing Prescalers" hexmask.long.word 0x00 16.--25. 1. "EDPRESDIV,Extended Data Phase Prescaler Division Factor" hexmask.long.word 0x00 0.--9. 1. "ENPRESDIV,Extended Nominal Prescaler Division Factor" group.long 0xBF4++0x03 line.long 0x00 "ENCBT,Enhanced Nominal CAN Bit Timing" hexmask.long.byte 0x00 22.--28. 1. "NRJW,Nominal Resynchronization Jump Width" hexmask.long.byte 0x00 12.--18. 1. "NTSEG2,Nominal Time Segment 2" newline hexmask.long.byte 0x00 0.--7. 1. "NTSEG1,Nominal Time Segment 1" group.long 0xBF8++0x03 line.long 0x00 "EDCBT,Enhanced Data Phase CAN bit Timing" bitfld.long 0x00 22.--25. "DRJW,Data Phase Resynchronization Jump Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. "DTSEG2,Data Phase Time Segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. "DTSEG1,Data Phase Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xBFC++0x03 line.long 0x00 "ETDC,Enhanced Transceiver Delay Compensation" bitfld.long 0x00 31. "ETDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" bitfld.long 0x00 30. "TDMDIS,Transceiver Delay Measurement Disable" "0: TDC measurement is enabled,1: TDC measurement is disabled" newline hexmask.long.byte 0x00 16.--22. 1. "ETDCOFF,Enhanced Transceiver Delay Compensation Offset" eventfld.long 0x00 15. "ETDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range,1: Measured loop delay is out of range" newline hexmask.long.byte 0x00 0.--7. 1. "ETDCVAL,Enhanced Transceiver Delay Compensation Value" group.long 0xC00++0x03 line.long 0x00 "FDCTRL,CAN FD Control Register" bitfld.long 0x00 31. "FDRATE,Bit Rate Switch Enable" "0: Transmit a frame in nominal rate,1: Transmit a frame with bit rate switching if.." bitfld.long 0x00 19.--20. "MBDSR1,Message Buffer Data Size for Region 1" "0: Selects 8 bytes per message buffer,1: Selects 16 bytes per message buffer,2: Selects 32 bytes per message buffer,3: Selects 64 bytes per message buffer" newline bitfld.long 0x00 16.--17. "MBDSR0,Message Buffer Data Size for Region 0" "0: Selects 8 bytes per message buffer,1: Selects 16 bytes per message buffer,2: Selects 32 bytes per message buffer,3: Selects 64 bytes per message buffer" bitfld.long 0x00 15. "TDCEN,Transceiver Delay Compensation Enable" "0: TDC is disabled,1: TDC is enabled" newline eventfld.long 0x00 14. "TDCFAIL,Transceiver Delay Compensation Fail" "0: Measured loop delay is in range,1: Measured loop delay is out of range" bitfld.long 0x00 8.--12. "TDCOFF,Transceiver Delay Compensation Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 0.--5. "TDCVAL,Transceiver Delay Compensation Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC04++0x03 line.long 0x00 "FDCBT,CAN FD Bit Timing Register" hexmask.long.word 0x00 20.--29. 1. "FPRESDIV,Fast Prescaler Division Factor" bitfld.long 0x00 16.--18. "FRJW,Fast Resync Jump Width" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--7. "FPSEG1,Fast Phase Segment 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "FPSEG2,Fast Phase Segment 2" "0,1,2,3,4,5,6,7" rgroup.long 0xC08++0x03 line.long 0x00 "FDCRC,CAN FD CRC Register" hexmask.long.byte 0x00 24.--30. 1. "FD_MBCRC,CRC Mailbox Number for FD_TXCRC" hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended Transmitted CRC value" group.long 0xC0C++0x03 line.long 0x00 "ERFCR,Enhanced Rx FIFO Control Register" bitfld.long 0x00 31. "ERFEN,Enhanced Rx FIFO enable" "0: Enhanced Rx FIFO is disabled,1: Enhanced Rx FIFO is enabled" bitfld.long 0x00 26.--30. "DMALW,DMA Last Word" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.byte 0x00 16.--22. 1. "NEXIF,Number of Extended ID Filter Elements" bitfld.long 0x00 8.--13. "NFE,Number of Enhanced Rx FIFO Filter Elements" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--4. "ERFWM,Enhanced Rx FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xC10++0x03 line.long 0x00 "ERFIER,Enhanced Rx FIFO Interrupt Enable Register" bitfld.long 0x00 31. "ERFUFWIE,Enhanced Rx FIFO Underflow Interrupt Enable" "0: Enhanced Rx FIFO Underflow interrupt is..,1: Enhanced Rx FIFO Underflow interrupt is enabled" bitfld.long 0x00 30. "ERFOVFIE,Enhanced Rx FIFO Overflow Interrupt Enable" "0: Enhanced Rx FIFO Overflow is disabled,1: Enhanced Rx FIFO Overflow is enabled" newline bitfld.long 0x00 29. "ERFWMIIE,Enhanced Rx FIFO Watermark Indication Interrupt Enable" "0: Enhanced Rx FIFO Watermark interrupt is..,1: Enhanced Rx FIFO Watermark interrupt is enabled" bitfld.long 0x00 28. "ERFDAIE,Enhanced Rx FIFO Data Available Interrupt Enable" "0: Enhanced Rx FIFO Data Available interrupt is..,1: Enhanced Rx FIFO Data Available interrupt is.." group.long 0xC14++0x03 line.long 0x00 "ERFSR,Enhanced Rx FIFO Status Register" eventfld.long 0x00 31. "ERFUFW,Enhanced Rx FIFO Underflow" "0: No such occurrence,1: Enhanced Rx FIFO underflow" eventfld.long 0x00 30. "ERFOVF,Enhanced Rx FIFO Overflow" "0: No such occurrence,1: Enhanced Rx FIFO overflow" newline eventfld.long 0x00 29. "ERFWMI,Enhanced Rx FIFO Watermark Indication" "0: No such occurrence,1: The number of messages in FIFO is greater.." eventfld.long 0x00 28. "ERFDA,Enhanced Rx FIFO Data Available" "0: No such occurrence,1: There is at least one message stored in.." newline bitfld.long 0x00 27. "ERFCLR,Enhanced Rx FIFO Clear" "0: no_effect,1: Clear Enhanced Rx FIFO content" rbitfld.long 0x00 17. "ERFE,Enhanced Rx FIFO empty" "0: Enhanced Rx FIFO is not empty,1: Enhanced Rx FIFO is empty" newline rbitfld.long 0x00 16. "ERFF,Enhanced Rx FIFO full" "0: Enhanced Rx FIFO is not full,1: Enhanced Rx FIFO is full" rbitfld.long 0x00 0.--5. "ERFEL,Enhanced Rx FIFO Elements" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" repeat 64. (increment 0 1) (increment 0 0x04) group.long ($2+0xC30)++0x03 line.long 0x00 "HR_TIME_STAMP[$1],High Resolution Time Stamp $1" hexmask.long 0x00 0.--31. 1. "TS,High Resolution Time Stamp" repeat.end repeat 32. (increment 0 1) (increment 0 0x04) group.long ($2+0x3000)++0x03 line.long 0x00 "ERFFEL[$1],Enhanced Rx FIFO Filter Element $1" hexmask.long 0x00 0.--31. 1. "FEL,Filter Element Bits" repeat.end endif repeat 4. (increment 0 1)(increment 0 0x10) tree "WMB[$1]" sif cpuis("IMX8UD3-CM33") rgroup.long ($2+0xB40)++0x03 line.long 0x00 "WMB_CS,Wake Up Message Buffer register for C/S" bitfld.long 0x00 22. "SRR,Substitute Remote Request" "0,1" bitfld.long 0x00 21. "IDE,ID Extended Bit" "0: Frame format is standard,1: Frame format is extended" newline bitfld.long 0x00 20. "RTR,Remote Transmission Request Bit" "0: Frame is data one (not remote),1: Frame is a remote one" bitfld.long 0x00 16.--19. "DLC,Length of Data in Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long ($2+0xB44)++0x03 line.long 0x00 "WMB_ID,Wake Up Message Buffer Register for ID" hexmask.long 0x00 0.--28. 1. "ID,Received ID under Pretended Networking mode" rgroup.long ($2+0xB48)++0x03 line.long 0x00 "WMB_D03,Wake Up Message Buffer Register for Data 0-3" hexmask.long.byte 0x00 24.--31. 1. "Data_byte_0,Received payload corresponding to the data byte 0 under Pretended Networking mode" hexmask.long.byte 0x00 16.--23. 1. "Data_byte_1,Received payload corresponding to the data byte 1 under Pretended Networking mode" newline hexmask.long.byte 0x00 8.--15. 1. "Data_byte_2,Received payload corresponding to the data byte 2 under Pretended Networking mode" hexmask.long.byte 0x00 0.--7. 1. "Data_byte_3,Received payload corresponding to the data byte 3 under Pretended Networking mode" rgroup.long ($2+0xB4C)++0x03 line.long 0x00 "WMB_D47,Wake Up Message Buffer Register Data 4-7" hexmask.long.byte 0x00 24.--31. 1. "Data_byte_4,Received payload corresponding to the data byte 4 under Pretended Networking mode" hexmask.long.byte 0x00 16.--23. 1. "Data_byte_5,Received payload corresponding to the data byte 5 under Pretended Networking mode" newline hexmask.long.byte 0x00 8.--15. 1. "Data_byte_6,Received payload corresponding to the data byte 6 under Pretended Networking mode" hexmask.long.byte 0x00 0.--7. 1. "Data_byte_7,Received payload corresponding to the data byte 7 under Pretended Networking mode" endif tree.end repeat.end tree.end tree "CASPER" base ad:0x28410000 group.long 0x00++0x03 line.long 0x00 "CTRL0,Control 0" hexmask.long.word 0x00 18.--28. 1. "CDOFF,CD Offset" bitfld.long 0x00 16. "CDBPAIR,CDOFF Bank Pair" "0: Bank-pair 0 (1st),1: Bank-pair 1 (2nd)" newline bitfld.long 0x00 2. "ABOFF,AB Offset" "0,1" bitfld.long 0x00 0. "ABBPAIR,ABOFF Bank Pair" "0: Bank-pair 0 (1st),1: Bank-pair 1 (2nd)" group.long 0x04++0x03 line.long 0x00 "CTRL1,Control 1" bitfld.long 0x00 30.--31. "CSKIP,Skip Rules on Carry" "0: NO_SKIP,1: Skip if Carry is 1,2: Skip if Carry is 0,3: Set CTRLOFF to CDOFF and Skip" hexmask.long.word 0x00 18.--28. 1. "RESOFF,Result Offset" newline bitfld.long 0x00 16. "RESBPAIR,RESOFF Bank Pair" "0: Bank-pair 0 (1st),1: Bank-pair 1 (2nd)" hexmask.long.byte 0x00 8.--15. 1. "MODE,Mode" newline hexmask.long.byte 0x00 0.--7. 1. "ITER,Interation Counter" group.long 0x0C++0x03 line.long 0x00 "STATUS,Status" rbitfld.long 0x00 5. "BUSY,Busy" "0: Not busy - is idle,1: Is busy" rbitfld.long 0x00 4. "CARRY,Carry" "0: Carry was 0 or no carry,1: Carry was 1" newline bitfld.long 0x00 0. "DONE,Done" "0: Busy or just cleared,1: Completed last operation" group.long 0x10++0x03 line.long 0x00 "INTENSET,Interrupt Enable Set" bitfld.long 0x00 0. "DONE,Done" "0: Do not interrupt when done,1: Interrupt when done" group.long 0x14++0x03 line.long 0x00 "INTENCLR,Interrupt Enable Clear" eventfld.long 0x00 0. "DONE,Done" "0: If written 0 ignored,1: If written 1 do not interrupt when done" rgroup.long 0x18++0x03 line.long 0x00 "INTSTAT,Interrupt status" bitfld.long 0x00 0. "DONE,If set interrupt is caused by accelerator being done" "0: Not caused by accelerator being done,1: Caused by accelerator being done" group.long 0x20++0x03 line.long 0x00 "AREG,A Register" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register Value" group.long 0x24++0x03 line.long 0x00 "BREG,B Register" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register Value" group.long 0x28++0x03 line.long 0x00 "CREG,C Register" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register Value" group.long 0x2C++0x03 line.long 0x00 "DREG,D Register" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register Value" group.long 0x30++0x03 line.long 0x00 "RES0,Result Register 0" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register Value" group.long 0x34++0x03 line.long 0x00 "RES1,Result Register 1" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register to hold working result (from multiplier adder/xor etc)" group.long 0x38++0x03 line.long 0x00 "RES2,Result Register 2" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register Value" group.long 0x3C++0x03 line.long 0x00 "RES3,Result Register 3" hexmask.long 0x00 0.--31. 1. "REG_VALUE,Register to hold working result (from multiplier adder/xor etc)" group.long 0x60++0x03 line.long 0x00 "MASK,Mask" hexmask.long 0x00 0.--31. 1. "MASK,Mask" group.long 0x64++0x03 line.long 0x00 "REMASK,Remask" hexmask.long 0x00 0.--31. 1. "MASK,Mask" group.long 0x80++0x03 line.long 0x00 "LOCK,Lock" hexmask.long.word 0x00 4.--16. 1. "KEY,Key" bitfld.long 0x00 0. "LOCK,Lock" "0: UNLOCK,1: Lock to current security level" tree.end tree "CGC (AD_CGC)" tree "CGC_AD" base ad:0x292C0000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" group.long 0x14++0x03 line.long 0x00 "CA35CLK,Clock Selection and Dividers for the CA35 Domain" rbitfld.long 0x00 31. "CA35LOCKED,CA35CLK Register Locked" "0,1" bitfld.long 0x00 28.--29. "SCS,Clock Selection for CA35 Domain" "0,1,2,3" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "DIVCORE,Clock Division for Core Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x20++0x03 line.long 0x00 "CLKOUTCFG,Clockout selection for Application Domain" bitfld.long 0x00 28. "CLKOUT_EN,Clockout Enable" "0,1" bitfld.long 0x00 23.--26. "CLKOUT_SEL,Select the clock source redirected to CLKOUT pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 17.--22. "CLKOUT_DIV,Select the clock division for the CLKOUT pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x34++0x03 line.long 0x00 "NICCLK,Clock Selection and Dividers for the NIC/XBAR Domain" rbitfld.long 0x00 31. "NICLOCKED,NICCLK Register Locked" "0,1" bitfld.long 0x00 28.--29. "SCS,Clock Selection forNIC Domain" "0,1,2,3" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "NIC_AD_DIVPLAT,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 14.--19. "NIC_PER_DIVPLAT,Clock Division for Core Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x38++0x03 line.long 0x00 "XBARCLK,Clock Selection and Dividers for the NIC/XBAR Domain" rbitfld.long 0x00 31. "XBARLOCKED,XBARCLK Register Locked" "0,1" bitfld.long 0x00 14.--19. "XBAR_AD_DIVPLAT,Clock Division for Plat Clk" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7.--12. "XBAR_DIVBUS,Clock Division for Bus Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "AD_SLOW,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x03 line.long 0x00 "CLKDIVRST,Clk Dividers Reset" bitfld.long 0x00 19. "NIC_RESET_EN," "0,1" bitfld.long 0x00 18. "NIC_INTERRUPT_EN,Selection between interrupt generation or clock dividers reset when NIC clocks are out of phase" "0,1" newline bitfld.long 0x00 17. "NIC_RST_DIVIDERS_EN,NIC clocks dividers out of phase interrupt" "0,1" eventfld.long 0x00 16. "NIC_OUT_OF_PHASE,NIC clocks dividers reset" "0,1" group.long 0x108++0x03 line.long 0x00 "SOSCDIV,Clock Dividers for the SYS OSC Oscilator" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" newline bitfld.long 0x00 16.--21. "DIV3,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" newline rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" bitfld.long 0x00 8.--13. "DIV2,Clock Division for Bus Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x208++0x03 line.long 0x00 "FRODIV,Clock Dividers for the FFRO 192 MHz Oscilator" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" newline bitfld.long 0x00 16.--21. "DIV3,Clock Division for FFRO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" newline rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" bitfld.long 0x00 8.--13. "DIV2,Clock Division for FFRO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for FFRO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x500++0x03 line.long 0x00 "PLL2CSR,PLL2 Control Status Register" rbitfld.long 0x00 25. "PLLSEL,PLL Selected" "0,1" rbitfld.long 0x00 24. "PLLVLD,PLL Valid" "0,1" newline bitfld.long 0x00 23. "LK,Lock Register" "0,1" bitfld.long 0x00 1. "PLLDSEN,PLL2 Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "PLLEN,PLL Enable" "0,1" group.long 0x510++0x03 line.long 0x00 "PLL2CFG,PLL2 Configuration Register" hexmask.long.byte 0x00 16.--22. 1. "MULT,System PLL Multiplier" bitfld.long 0x00 0. "SOURCE,Clock Source" "0,1" group.long 0x518++0x03 line.long 0x00 "PLL2DENOM,Fractional PLL2 Denominator Control Register" hexmask.long 0x00 0.--29. 1. "DENOM,Denominator" group.long 0x51C++0x03 line.long 0x00 "PLL2NUM,Fractional PLL2 Numerator Control Register" hexmask.long 0x00 0.--29. 1. "NUM,Numerator" group.long 0x520++0x03 line.long 0x00 "PLL2SS,Fractional PLL2 Spread Spectrum Control Register" hexmask.long.word 0x00 16.--31. 1. "STOP,Stop" bitfld.long 0x00 15. "ENABLE,Enable" "0,1" newline hexmask.long.word 0x00 0.--14. 1. "STEP,Step" group.long 0x600++0x03 line.long 0x00 "PLL3CSR,PLL3 Control Status Register" rbitfld.long 0x00 25. "PLLSEL,PLL Selected" "0,1" rbitfld.long 0x00 24. "PLLVLD,PLL Valid" "0,1" newline bitfld.long 0x00 23. "LK,Lock Register" "0,1" bitfld.long 0x00 1. "PLLDSEN,PLL3 Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "PLLEN,PLL Enable" "0,1" group.long 0x604++0x03 line.long 0x00 "PLL3DIV_VCO,Clock Dividers for the fractional PLL3" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL3 VCO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x608++0x03 line.long 0x00 "PLL3DIV_PFD_0,Clock Dividers for the fractional PLL3" bitfld.long 0x00 31. "DIV4HALT,Divider 4 Halted" "0,1" rbitfld.long 0x00 30. "DIV4LOCKED,The value of clock division was changed and access to DIV4 is locked" "0,1" newline bitfld.long 0x00 24.--29. "DIV4,Clock Division for PLL3 PFD1 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" newline rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" bitfld.long 0x00 16.--21. "DIV3,Clock Division for PLL3 PFD1 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" newline bitfld.long 0x00 8.--13. "DIV2,Clock Division for PLL3 PFD0 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL3 PFD0 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x60C++0x03 line.long 0x00 "PLL3DIV_PFD_1,Clock Dividers for the fractional PLL3" bitfld.long 0x00 31. "DIV4HALT,Divider 4 Halted" "0,1" rbitfld.long 0x00 30. "DIV4LOCKED,The value of clock division was changed and access to DIV4 is locked" "0,1" newline bitfld.long 0x00 24.--29. "DIV4,Clock Division for PLL3 PFD3 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" newline rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" bitfld.long 0x00 16.--21. "DIV3,Clock Division for PLL3 PFD3 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" newline bitfld.long 0x00 8.--13. "DIV2,Clock Division for PLL3 PFD2 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL3 PFD2 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x610++0x03 line.long 0x00 "PLL3CFG,PLL3 Configuration Register" hexmask.long.byte 0x00 16.--22. 1. "MULT,System PLL Multiplier" bitfld.long 0x00 13. "HOLDRING_OFF,HOLDRING_OFF" "0,1" newline bitfld.long 0x00 12. "PFD_OFFSET_EN,PFD_OFFSET_EN" "0,1" bitfld.long 0x00 11. "DITHER_EN,DITHER_EN" "0,1" newline bitfld.long 0x00 6. "DOUBLE_CP_CURRENT,DOUBLE_CP_CURRENT" "0,1" bitfld.long 0x00 5. "DOUBLE_LF_R,DOUBLE_LF_R" "0,1" newline bitfld.long 0x00 4. "HALF_CP_CURRENT,HALF_CP_CURRENT" "0,1" bitfld.long 0x00 3. "HALF_LR_R,HALF_LR_R" "0,1" newline bitfld.long 0x00 0. "SOURCE,Clock Source" "0,1" group.long 0x614++0x03 line.long 0x00 "PLL3PFDCFG,PLL3 Configuration Register" bitfld.long 0x00 31. "PFD3_CLKGATE,Clock gate of PFD3" "0,1" rbitfld.long 0x00 30. "PFD3_VALID,PFD3_VALID" "0,1" newline bitfld.long 0x00 24.--29. "PFD3,PLL Fractional Divider 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "PFD2_CLKGATE,Clock gate of PFD2" "0,1" newline rbitfld.long 0x00 22. "PFD2_VALID,PFD2_VALID" "0,1" bitfld.long 0x00 16.--21. "PFD2,PLL Fractional Divider 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "PFD1_CLKGATE,Clock gate of PFD1" "0,1" rbitfld.long 0x00 14. "PFD1_VALID,PFD1_VALID" "0,1" newline bitfld.long 0x00 8.--13. "PFD1,PLL Fractional Divider 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "PFD0_CLKGATE,Clock gate of PFD0" "0,1" newline rbitfld.long 0x00 6. "PFD0_VALID,PFD0_VALID" "0,1" bitfld.long 0x00 0.--5. "PFD0,PLL Fractional Divider 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x618++0x03 line.long 0x00 "PLL3DENOM,PLL3 Denominator Register" hexmask.long 0x00 0.--29. 1. "DENOM,PLL Denominator Register" group.long 0x61C++0x03 line.long 0x00 "PLL3NUM,PLL3 Numerator Register" hexmask.long 0x00 0.--29. 1. "NUM,PLL Numerator Register" group.long 0x620++0x03 line.long 0x00 "PLL3SS,PLL3 Spread Spectrum Register" hexmask.long.word 0x00 16.--31. 1. "STOP,STOP" bitfld.long 0x00 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x00 0.--14. 1. "STEP,STEP" group.long 0x624++0x03 line.long 0x00 "PLL3LOCK,PLL3 LOCK Configuration Register" hexmask.long.word 0x00 0.--15. 1. "LOCK_TIME,LOCK_TIME" group.long 0x700++0x03 line.long 0x00 "ENETSTAMP,Clock Selection for Ethernet Time Stamp" bitfld.long 0x00 24.--26. "CLKOUT_SEL,Selection of clock source used for Ethernet time stamp" "0,1,2,3,4,5,6,7" group.long 0x810++0x03 line.long 0x00 "PLLUSBCFG,PLLUSB Register Enable" bitfld.long 0x00 0. "SOURCE,Clock Source" "0,1" group.long 0x900++0x03 line.long 0x00 "AUD_CLK1,AUD_CLK1 source to SAI4-5" bitfld.long 0x00 0.--2. "AUD_CLK1,AUD_CLK1 Clock Source Selection" "0,1,2,3,4,5,6,7" group.long 0x904++0x03 line.long 0x00 "SAI5_4_CLK,SAI5-4 Clock Source Selection" bitfld.long 0x00 8.--9. "SAI5CLK,Clock Source for SAI5" "0,1,2,3" bitfld.long 0x00 0.--1. "SAI4CLK,Clock Source for SAI4" "0,1,2,3" group.long 0x908++0x03 line.long 0x00 "TPM6_7CLK,Multiplexer to select the audio clock connected to the TPM clock input" bitfld.long 0x00 8.--9. "TPM7CLK,Clock Selection for TPM7" "0,1,2,3" bitfld.long 0x00 0.--1. "TPM6CLK,Clock Selection for TPM6" "0,1,2,3" group.long 0x90C++0x03 line.long 0x00 "MQS1CLK,Multiplexer to select the audio clock connected to the MQS clock input" bitfld.long 0x00 0.--1. "MQS1CLK,Clock Selection for MQS1" "0,1,2,3" group.long 0xA00++0x03 line.long 0x00 "LVDSCFG,Multiplexer to select the clock connected to the LVDS clock output" bitfld.long 0x00 16. "LVDS_DIV2_EN,LVDS Div by 2 Enable" "0,1" hexmask.long.byte 0x00 0.--7. 1. "LVDS_CLK_EN,LVDS Enable" tree.end tree "CGC_LPAV" base ad:0x2DA60000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" group.long 0x14++0x03 line.long 0x00 "HIFICLK,Clock Selection and Dividers for the HIFI Domain" rbitfld.long 0x00 31. "HIFILOCKED,HIFICLK Register Locked" "0,1" bitfld.long 0x00 28.--30. "SCS,Clock Selection for HIFI Domain" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "HIFI_DIVCORE,Clock Division for Core Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 14.--19. "NIC_HIFI_DIVPLAT,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x20++0x03 line.long 0x00 "CLKOUTCFG,Clockout selection for LPAV Domain" bitfld.long 0x00 28. "CLKOUT_EN,Clockout Enable" "0,1" bitfld.long 0x00 23.--26. "CLKOUT_SEL,Select the clock source redirected to CLKOUT pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 17.--22. "CLKOUT_DIV,Select the clock division for the CLKOUT pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x3C++0x03 line.long 0x00 "NICLPAVCLK,Clock Selection and Dividers for the HIFI Domain" rbitfld.long 0x00 31. "NICLOCKED,NIC CLK Register Locked" "0,1" bitfld.long 0x00 28.--29. "SCS,Clock Selection for HIFI domain" "0,1,2,3" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "LPAV_AXI_CLK,Clock Division for AXI Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 14.--19. "LPAV_AHB_CLK,Clock Division for AHB Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7.--12. "LPAV_BUS_CLK,Clock Division for Bus Clk" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x40++0x03 line.long 0x00 "DDRCLK,Clock Selection and Dividers for the DDR Domain" rbitfld.long 0x00 31. "DDRLOCKED,DDR CLK Register Locked" "0,1" bitfld.long 0x00 28.--30. "SCS,Clock Selection for DDR Clock" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "DDR_DIV,Clock Division for Core Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x03 line.long 0x00 "CLKDIVRST,Clk Dividers Reset" bitfld.long 0x00 19. "HIFI_RESET_EN," "0,1" bitfld.long 0x00 18. "HIFI_INTERRUPT_EN,Selection between interrupt generation or clock dividers reset when hifi4 clocks are out of phase" "0,1" newline bitfld.long 0x00 17. "HIFI_RST_DIVIDERS_EN,HIFI4 clocks dividers out of phase interrupt" "0,1" eventfld.long 0x00 16. "HIFI_OUT_OF_PHASE,HIFI4 clocks dividers reset" "0,1" newline bitfld.long 0x00 3. "NICLPAV_RESET_EN," "0,1" bitfld.long 0x00 2. "NICLPAV_INTERRUPT_EN,Selection between interrupt generation or clock dividers reset when nic clocks are out of phase" "0,1" newline bitfld.long 0x00 1. "NICLPAV_RST_DIVIDERS_EN,NIC clocks dividers out of phase interrupt" "0,1" eventfld.long 0x00 0. "NICLPAV_OUT_OF_PHASE,NIC clocks dividers reset" "0,1" group.long 0x108++0x03 line.long 0x00 "SOSCDIV,Clock Dividers for the SOSC CLK" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" rbitfld.long 0x00 22. "DIV3LOCKED,Write to DIV3 Locked" "0,1" newline bitfld.long 0x00 16.--21. "DIV3,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" newline rbitfld.long 0x00 14. "DIV2LOCKED,Write to DIV2 Locked" "0,1" bitfld.long 0x00 8.--13. "DIV2,Clock Division for Bus Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,Write to DIV1 Locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x208++0x03 line.long 0x00 "FRODIV,Clock Dividers for the FRO" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" newline bitfld.long 0x00 16.--21. "DIV3,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" newline rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" bitfld.long 0x00 8.--13. "DIV2,Clock Division for Bus Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x600++0x03 line.long 0x00 "PLL4CSR,PLL Control Status Register" rbitfld.long 0x00 25. "PLLSEL,PLL Selected" "0,1" rbitfld.long 0x00 24. "PLLVLD,PLL Valid" "0,1" newline bitfld.long 0x00 23. "LK,Lock Register" "0,1" bitfld.long 0x00 1. "PLLDSEN,PLL4 Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "PLLEN,PLL Enable" "0,1" group.long 0x604++0x03 line.long 0x00 "PLL4DIV_VCO,Clock Dividers for the fractional PLL4" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL4 VCO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x608++0x03 line.long 0x00 "PLL4DIV_PFD_0,Clock Dividers for the fractional PLL4" bitfld.long 0x00 31. "DIV4HALT,Divider 4 Halted" "0,1" rbitfld.long 0x00 30. "DIV4LOCKED,The value of clock division was changed and access to DIV4 is locked" "0,1" newline bitfld.long 0x00 24.--29. "DIV4,Clock Division for PLL4 PFD1 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" newline rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" bitfld.long 0x00 16.--21. "DIV3,Clock Division for PLL4 PFD1 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" newline bitfld.long 0x00 8.--13. "DIV2,Clock Division for PLL4 PFD0 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL4 PFD0 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x60C++0x03 line.long 0x00 "PLL4DIV_PFD_1,Clock Dividers for the fractional PLL4" bitfld.long 0x00 31. "DIV4HALT,Divider 4 Halted" "0,1" rbitfld.long 0x00 30. "DIV4LOCKED,The value of clock division was changed and access to DIV4 is locked" "0,1" newline bitfld.long 0x00 24.--29. "DIV4,Clock Division for PLL4 PFD3 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" newline rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" bitfld.long 0x00 16.--21. "DIV3,Clock Division for PLL4 PFD3 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" newline bitfld.long 0x00 8.--13. "DIV2,Clock Division for PLL4 PFD2 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL4 PFD2 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x610++0x03 line.long 0x00 "PLL4CFG,PLL4 Configuration Register" hexmask.long.byte 0x00 16.--22. 1. "MULT,System PLL Multiplier" bitfld.long 0x00 13. "HOLDRING_OFF,HOLDRING_OFF" "0,1" newline bitfld.long 0x00 12. "PFD_OFFSET_EN,PFD_OFFSET_EN" "0,1" bitfld.long 0x00 11. "DITHER_EN,DITHER_EN" "0,1" newline bitfld.long 0x00 6. "DOUBLE_CP_CURRENT,DOUBLE_CP_CURRENT" "0,1" bitfld.long 0x00 5. "DOUBLE_LF_R,DOUBLE_LF_R" "0,1" newline bitfld.long 0x00 4. "HALF_CP_CURRENT,HALF_CP_CURRENT" "0,1" bitfld.long 0x00 3. "HALF_LR_R,HALF_LR_R" "0,1" newline bitfld.long 0x00 0. "SOURCE,Clock Source" "0,1" group.long 0x614++0x03 line.long 0x00 "PLL4PFDCFG,PLL4 Configuration Register" bitfld.long 0x00 31. "PFD3_CLKGATE,Clock gate of PFD3" "0,1" rbitfld.long 0x00 30. "PFD3_VALID,PFD3_VALID" "0,1" newline bitfld.long 0x00 24.--29. "PFD3,PLL Fractional Divider 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "PFD2_CLKGATE,Clock gate of PFD2" "0,1" newline rbitfld.long 0x00 22. "PFD2_VALID,PFD2_VALID" "0,1" bitfld.long 0x00 16.--21. "PFD2,PLL Fractional Divider 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "PFD1_CLKGATE,Clock gate of PFD1" "0,1" rbitfld.long 0x00 14. "PFD1_VALID,PFD1_VALID" "0,1" newline bitfld.long 0x00 8.--13. "PFD1,PLL Fractional Divider 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "PFD0_CLKGATE,Clock gate of PFD0" "0,1" newline rbitfld.long 0x00 6. "PFD0_VALID,PFD0_VALID" "0,1" bitfld.long 0x00 0.--5. "PFD0,PLL Fractional Divider 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x618++0x03 line.long 0x00 "PLL4DENOM,PLL Denominator Register" hexmask.long 0x00 0.--29. 1. "DENOM,PLL Denominator Register" group.long 0x61C++0x03 line.long 0x00 "PLL4NUM,PLL Numerator Register" hexmask.long 0x00 0.--29. 1. "NUM,PLL Numerator Register" group.long 0x620++0x03 line.long 0x00 "PLL4SS,PLL Spread Spectrum Register" hexmask.long.word 0x00 16.--31. 1. "STOP,STOP" bitfld.long 0x00 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x00 0.--14. 1. "STEP,STEP" group.long 0x624++0x03 line.long 0x00 "PLL4LOCK,PLL LOCK Configuration Register" hexmask.long.word 0x00 0.--15. 1. "LOCK_TIME,LOCK_TIME" group.long 0x900++0x03 line.long 0x00 "AUD_CLK2,AUD_CLK2 source to SAI7-6" bitfld.long 0x00 0.--2. "AUD_CLK2,AUD_CLK2 Clock Source Selection" "0,1,2,3,4,5,6,7" group.long 0x904++0x03 line.long 0x00 "SAI7_6_CLK,SAI7-6 Clock Source Selection" bitfld.long 0x00 8.--10. "SAI7CLK,Clock Source for SAI7" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "SAI6CLK,Clock Source for SAI6" "0,1,2,3,4,5,6,7" group.long 0x908++0x03 line.long 0x00 "TPM8CLK,Multiplexer to select the audio clock connected to the TPM clock input" bitfld.long 0x00 0.--2. "TPM8CLK,Clock Selection for TPM8" "0,1,2,3,4,5,6,7" group.long 0x910++0x03 line.long 0x00 "SPDIFCLK,Multiplexer to select the audio clock connected to the SPDIF clock input" bitfld.long 0x00 0.--2. "SPDIFCLK,Clock Selection for SPDIF" "0,1,2,3,4,5,6,7" group.long 0xA00++0x03 line.long 0x00 "LVDSCFG,Multiplexer to select the clock connected to the LVDS clock output" bitfld.long 0x00 16. "LVDS_DIV2_EN,LVDS Div by 2 Enable" "0,1" bitfld.long 0x00 0.--4. "LVDS_CLK_EN,LVDS Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" tree.end tree "CGC_RTD" base ad:0x2802F000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" group.long 0x10++0x03 line.long 0x00 "CM33CLK,Clock Selection and Dividers for the M33 Domain" rbitfld.long 0x00 31. "CM33LOCKED,CM33 CLK Register Locked" "0,1" bitfld.long 0x00 28.--30. "SCS,Clock Selection for M33 Domain" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "DIVCORE,Clock Division for Core Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7.--12. "DIVBUS,Clock Division for Bus Clk" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "DIVSLOW,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1C++0x03 line.long 0x00 "FUSIONCLK,Clock Selection and Dividers for the Fusion DSP Domain" rbitfld.long 0x00 31. "FUSIONLOCKED,FUSION CLK Register Locked" "0,1" bitfld.long 0x00 28.--30. "SCS,Clock Selection for DSP Domain" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 27. "SCSW,Clock switched to selected clock source" "0,1" bitfld.long 0x00 21.--26. "DIVCORE,Clock Division for Core Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7.--12. "DIVBUS,Clock Division for Bus Clk" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "DIVSLOW,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x20++0x03 line.long 0x00 "CLKOUTCFG,Clockout selection for Real Time Domain" bitfld.long 0x00 28. "CLKOUT_EN,Clockout Enable" "0,1" bitfld.long 0x00 23.--27. "CLKOUT_SEL,Select the clock source redirected to CLKOUT pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 17.--22. "CLKOUT_DIV,Select the clock division for the CLKOUT pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x03 line.long 0x00 "CLKDIVRST,Clk Dividers Reset" bitfld.long 0x00 19. "CM33_RESET_EN,Enable of reset generation when CM33 system clocks are out of phase" "0,1" bitfld.long 0x00 18. "CM33_INTERRUPT_EN,Selection between interrupt generation or clock dividers reset when cm33 system clocks are out of phase" "0,1" newline bitfld.long 0x00 17. "CM33_RST_DIVIDERS_EN,CM33 system clocks dividers out of phase interrupt" "0,1" eventfld.long 0x00 16. "CM33_OUT_OF_PHASE,CM33 system clocks dividers reset" "0,1" newline bitfld.long 0x00 3. "FUSION_RESET_EN,Enable of reset generation when fusion system clocks are out of phase" "0,1" bitfld.long 0x00 2. "FUSION_INTERRUPT_EN,Selection between interrupt generation or clock dividers reset when fusion system clocks are out of phase" "0,1" newline bitfld.long 0x00 1. "FUSION_RST_DIVIDERS_EN,Fusion system clocks dividers out of phase interrupt" "0,1" eventfld.long 0x00 0. "FUSION_OUT_OF_PHASE,Fusion system clocks dividers reset" "0,1" group.long 0x104++0x03 line.long 0x00 "SOSCCSR,System OSC Control Status Register" eventfld.long 0x00 26. "SOSCERR,System OSC Clock Error" "0,1" rbitfld.long 0x00 25. "SOSCSEL,System OSC Selected" "0,1" newline rbitfld.long 0x00 24. "SOSCVLD,System OSC Valid" "0,1" bitfld.long 0x00 23. "LK,Lock Register" "0,1" newline bitfld.long 0x00 17. "SOSCCMRE,System OSC Clock Monitor Reset Enable" "0,1" bitfld.long 0x00 16. "SOSCCM,System OSC Clock Monitor" "0,1" newline bitfld.long 0x00 2. "SOSCPDEN,System OSC Enable in Power Down" "0,1" bitfld.long 0x00 1. "SOSCDSEN,System OSC Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "SOSCEN,System OSC Enable" "0,1" group.long 0x108++0x03 line.long 0x00 "SOSCDIV,Clock Dividers for the SYS OSC Oscilator" bitfld.long 0x00 23. "DIV3HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" newline bitfld.long 0x00 16.--21. "DIV3,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "DIV2HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" bitfld.long 0x00 8.--13. "DIV2,Clock Division for Bus Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10C++0x03 line.long 0x00 "SOSCCFG,System Oscillator Configuration Register" bitfld.long 0x00 3. "HGO,High Gain Oscillator Select" "0,1" bitfld.long 0x00 2. "SYSOSC_BYPASS_EN,System Oscillator Bypass Enable" "0,1" group.long 0x200++0x03 line.long 0x00 "FROCSR,FRO Control Status Register" rbitfld.long 0x00 25. "FROSEL,FRO Selected" "0,1" rbitfld.long 0x00 24. "FROVLD,FRO Valid" "0,1" newline bitfld.long 0x00 23. "LK,Lock Register" "0,1" bitfld.long 0x00 1. "FRODSEN,FRO Enable in Sleep Mode" "0,1" group.long 0x204++0x03 line.long 0x00 "FROCTRL,FRO Control Register" bitfld.long 0x00 31. "ENA_TUNE,Enable Tuning" "0,1" bitfld.long 0x00 21.--25. "THRESH_RANGE_LOW,Threshold Range Lower Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 16.--20. "THRESH_RANGE_UP,Threshold Range Upper Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--15. 1. "EXP_COUNT,Expected Count" rgroup.long 0x208++0x03 line.long 0x00 "FROCAPVAL,FRO Cap Val Register" bitfld.long 0x00 31. "DATA_VALID,Data Valid" "0,1" hexmask.long.word 0x00 0.--15. 1. "CAPVAL,Captured Value" group.long 0x210++0x03 line.long 0x00 "FRORDTRIM,RD Trim Values for FRO" hexmask.long.word 0x00 0.--10. 1. "TRIM,Trim" group.long 0x214++0x03 line.long 0x00 "FROSCTRIM,SC TRIM value for FRO" bitfld.long 0x00 0.--5. "TRIM,Switched Capacitor TRIM Value for FRO" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x220++0x03 line.long 0x00 "FRODIV,Clock Dividers for the FFRO 192 MHz Oscilator" bitfld.long 0x00 23. "DIV3HALT,Divider 3 Halted" "0,1" rbitfld.long 0x00 22. "DIV3LOCKED,The value of clock division was changed and access to DIV3 is locked" "0,1" newline bitfld.long 0x00 16.--21. "DIV3,Clock Division for Platform Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" newline rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" bitfld.long 0x00 8.--13. "DIV2,Clock Division for Bus Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for Slow Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x230++0x03 line.long 0x00 "FRORDTRIM_FUSE,Trim values loaded from fuses" hexmask.long.word 0x00 0.--10. 1. "RD_TRIM_FROM_FUSES,This register captures the value of FRO trim that were defined by fuses" rgroup.long 0x240++0x03 line.long 0x00 "FROSCTRIM_FUSE,SC Trim Values loaded from fuses" bitfld.long 0x00 0.--5. "SC_TRIM_FROM_FUSES,SC TRIM Values loaded from fuses" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x300++0x03 line.long 0x00 "LPOSCCSR,Low Power OSC Control Status Register" rbitfld.long 0x00 24. "LPOSCVLD,Low Power OSC Valid" "0,1" bitfld.long 0x00 23. "LK,Lock Register" "0,1" newline bitfld.long 0x00 2. "LPOSCPDEN,Low Power Oscilator Enable in Power Down" "0,1" bitfld.long 0x00 1. "LPOSCDSEN,Low Power OSC Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "LPOSCEN,Low Power OSC Enable" "0,1" group.long 0x304++0x03 line.long 0x00 "LPOSCCTRL,LPO Oscillator Control Register" bitfld.long 0x00 22. "DIS_ZTC,Disable ZTC" "0,1" hexmask.long.byte 0x00 14.--21. 1. "ZTC,ZTC" newline bitfld.long 0x00 8.--13. "PTAT,PTAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.byte 0x00 0.--7. 1. "BIASCURRENT,BIASCURRENT" group.long 0x404++0x03 line.long 0x00 "ROSCCTRL,ROSCCSR" eventfld.long 0x00 26. "ROSCERR,RTC OSC Clock Error" "0,1" rbitfld.long 0x00 25. "ROSCSEL,RTC OSC Selected" "0,1" newline rbitfld.long 0x00 24. "ROSCVLD,RTC OSC Valid" "0,1" bitfld.long 0x00 23. "LK,Lock Register" "0,1" newline bitfld.long 0x00 17. "ROSCCMRE,RTC OSC Clock Monitor Reset Enable" "0,1" bitfld.long 0x00 16. "ROSCCM,RTC OSC Clock Monitor" "0,1" group.long 0x500++0x03 line.long 0x00 "PLL0CSR,System OSC Control Status Register" rbitfld.long 0x00 25. "PLLSEL,PLL0 Selected" "0,1" rbitfld.long 0x00 24. "PLLVLD,PLL0 Valid" "0,1" newline bitfld.long 0x00 23. "LK,Lock Register" "0,1" bitfld.long 0x00 1. "PLL0DSEN,PLL0 Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "PLL0EN,PLL0 Enable" "0,1" group.long 0x504++0x03 line.long 0x00 "PLL0DIV_VCO,Clock Dividers for the fractional PLL0" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL0 VCO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x508++0x03 line.long 0x00 "PLL0DIV_PFD_0,Clock Dividers for the fractional PLL0" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" newline bitfld.long 0x00 8.--13. "DIV2,Clock Division for PLL0 PFD2 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL0 PFD1 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x510++0x03 line.long 0x00 "PLL0CFG,PLL0 Register Enable" bitfld.long 0x00 16.--18. "MULT,System PLL Multiplier" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. "HOLDRING_OFF,HOLDRING_OFF" "0,1" newline bitfld.long 0x00 6. "DOUBLE_CP_CURRENT,Double Charge Pumple Current" "0,1" bitfld.long 0x00 5. "DOUBLE_LF_R,Double Resistor in Low Pass Filter" "0,1" newline bitfld.long 0x00 4. "HALF_CP_CURRENT,Half Charge Pump Current" "0,1" bitfld.long 0x00 3. "HALF_LR_R,Half Resistor in Low Pass Filter" "0,1" newline bitfld.long 0x00 0. "SOURCE,Clock Source" "0,1" group.long 0x514++0x03 line.long 0x00 "PLL0PFDCFG,PLL0 Configuration Register" bitfld.long 0x00 31. "PFD3_CLKGATE,Clock gate of PFD3" "0,1" rbitfld.long 0x00 30. "PFD3_VALID,PFD3_VALID" "0,1" newline bitfld.long 0x00 24.--29. "PFD3,PLL Fractional Divider 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "PFD2_CLKGATE,Clock gate of PFD2" "0,1" newline rbitfld.long 0x00 22. "PFD2_VALID,PFD2_VALID" "0,1" bitfld.long 0x00 16.--21. "PFD2,PLL Fractional Divider 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "PFD1_CLKGATE,Clock gate of PFD1" "0,1" rbitfld.long 0x00 14. "PFD1_VALID,PFD1_VALID" "0,1" newline bitfld.long 0x00 8.--13. "PFD1,PLL Fractional Divider 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "PFD0_CLKGATE,Clock gate of PFD0" "0,1" newline rbitfld.long 0x00 6. "PFD0_VALID,PFD0_VALID" "0,1" bitfld.long 0x00 0.--5. "PFD0,PLL Fractional Divider 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x524++0x03 line.long 0x00 "PLL0LOCK,PLL LOCK Configuration Register" hexmask.long.word 0x00 0.--15. 1. "LOCK_TIME,LOCK_TIME" group.long 0x600++0x03 line.long 0x00 "PLL1CSR,PLL1 Control Status Register" rbitfld.long 0x00 25. "PLLSEL,PLL1 Selected" "0,1" rbitfld.long 0x00 24. "PLLVLD,PLL1 Valid" "0,1" newline bitfld.long 0x00 23. "LK,Lock Register" "0,1" bitfld.long 0x00 1. "PLLDSEN,PLL1 Enable in Deep Sleep" "0,1" newline bitfld.long 0x00 0. "PLLEN,PLL Enable" "0,1" group.long 0x604++0x03 line.long 0x00 "PLL1DIV_VCO,Clock Dividers for the fractional PLL1" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" rbitfld.long 0x00 6. "DIV1LOCKED,The value of clock division was changed and access to DIV1 is locked" "0,1" newline bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL1 VCO Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x608++0x03 line.long 0x00 "PLL1DIV_PFD_0,Clock Dividers for the fractional PLL1" bitfld.long 0x00 15. "DIV2HALT,Divider 2 Halted" "0,1" rbitfld.long 0x00 14. "DIV2LOCKED,The value of clock division was changed and access to DIV2 is locked" "0,1" newline bitfld.long 0x00 8.--13. "DIV2,Clock Division for PLL1 PFD2 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "DIV1HALT,Divider 1 Halted" "0,1" newline rbitfld.long 0x00 6. "DIV1LOCKED,Write to DIV1 Locked" "0,1" bitfld.long 0x00 0.--5. "DIV1,Clock Division for PLL1 PFD1 Clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x610++0x03 line.long 0x00 "PLL1CFG,PLL1 Configuration Register" hexmask.long.byte 0x00 16.--22. 1. "MULT,System PLL Multiplier" bitfld.long 0x00 13. "HOLDRING_OFF,Hold Ring Off Control" "0,1" newline bitfld.long 0x00 12. "PFD_OFFSET_EN,PFD_OFFSET_EN" "0,1" bitfld.long 0x00 11. "DITHER_EN,DITHER_EN" "0,1" newline bitfld.long 0x00 6. "DOUBLE_CP_CURRENT,Double Charge Pumple Current" "0,1" bitfld.long 0x00 5. "DOUBLE_LF_R,Double Resistor in Low Pass Filter" "0,1" newline bitfld.long 0x00 4. "HALF_CP_CURRENT,Half Charge Pump Current" "0,1" bitfld.long 0x00 3. "HALF_LR_R,Half Resistor in Low Pass Filter" "0,1" newline bitfld.long 0x00 0. "SOURCE,Clock Source" "0,1" group.long 0x614++0x03 line.long 0x00 "PLL1PFDCFG,PLL1 Configuration Register" bitfld.long 0x00 31. "PFD3_CLKGATE,Clock gate of PFD3" "0,1" rbitfld.long 0x00 30. "PFD3_VALID,PFD3_VALID" "0,1" newline bitfld.long 0x00 24.--29. "PFD3,PLL Fractional Divider 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "PFD2_CLKGATE,Clock gate of PFD0" "0,1" newline rbitfld.long 0x00 22. "PFD2_VALID,PFD0_VALID" "0,1" bitfld.long 0x00 16.--21. "PFD2,PLL Fractional Divider 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "PFD1_CLKGATE,Clock gate of PFD0" "0,1" rbitfld.long 0x00 14. "PFD1_VALID,PFD0_VALID" "0,1" newline bitfld.long 0x00 8.--13. "PFD1,PLL Fractional Divider 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. "PFD0_CLKGATE,Clock gate of PFD0" "0,1" newline rbitfld.long 0x00 6. "PFD0_VALID,PFD0_VALID" "0,1" bitfld.long 0x00 0.--5. "PFD0,PLL Fractional Divider 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x618++0x03 line.long 0x00 "PLL1DENOM,PLL Denominator Register" hexmask.long 0x00 0.--29. 1. "DENOM,PLL Denominator Register" group.long 0x61C++0x03 line.long 0x00 "PLL1NUM,PLL Numerator Register" hexmask.long 0x00 0.--29. 1. "NUM,PLL Numerator Register" group.long 0x620++0x03 line.long 0x00 "PLL1SS,PLL Spread Spectrum Register" hexmask.long.word 0x00 16.--31. 1. "STOP,STOP" bitfld.long 0x00 15. "ENABLE,ENABLE" "0,1" newline hexmask.long.word 0x00 0.--14. 1. "STEP,STEP" group.long 0x624++0x03 line.long 0x00 "PLL1LOCK,PLL LOCK Configuration Register" hexmask.long.word 0x00 0.--15. 1. "LOCK_TIME,LOCK_TIME" group.long 0x808++0x03 line.long 0x00 "RTCDIV,Clock Dividers for the RTC Oscilator" bitfld.long 0x00 10. "HALTDIV,RTC Divider Halted" "0,1" hexmask.long.word 0x00 0.--9. 1. "DIV1,Clock Division for Slow Clock" group.long 0x900++0x03 line.long 0x00 "AUD_CLK0,AUD_CLK0 source to SAI0-3" bitfld.long 0x00 0.--3. "AUD_CLK0,AUD_CLK0 Clock Source Selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x904++0x03 line.long 0x00 "SAI3_0_CLK,SAI3-0 Clock Source Selection" bitfld.long 0x00 24.--25. "SAI3CLK,Clock Source for SAI3" "0,1,2,3" bitfld.long 0x00 16.--17. "SAI2CLK,Clock Source for SAI2" "0,1,2,3" newline bitfld.long 0x00 8.--9. "SAI1CLK,Clock Source for SAI1" "0,1,2,3" bitfld.long 0x00 0.--1. "SAI0CLK,Clock Source for SAI0" "0,1,2,3" group.long 0x908++0x03 line.long 0x00 "TPM3_2CLK,Multiplexer to select the audio clock connected to the TPM clock input" bitfld.long 0x00 8.--9. "TPM3CLK,Clock Selection for TPM3" "0,1,2,3" bitfld.long 0x00 0.--1. "TPM2CLK,Clock Selection for TPM2" "0,1,2,3" group.long 0x90C++0x03 line.long 0x00 "MQS0CLK,Multiplexer to select the audio clock connected to the MQS clock input" bitfld.long 0x00 0.--1. "MQS0CLK,Clock Selection for MQS0" "0,1,2,3" group.long 0x914++0x03 line.long 0x00 "EMICFIL,Multiplexer to select the eMICFIL clock source" bitfld.long 0x00 0.--2. "MICFILCLK,Clock Source for eMICFIL" "0,1,2,3,4,5,6,7" group.long 0xA00++0x03 line.long 0x00 "LVDSCFG,Multiplexer to select the clock connected to the LVDS clock output" bitfld.long 0x00 16. "LVDS_DIV2_EN,LVDS Div by 2 Enable" "0,1" hexmask.long.word 0x00 0.--12. 1. "LVDS_CLK_EN,LVDS Enable" tree.end tree.end tree "CMC (CMC1)" tree "CMC_AD" base ad:0x29240000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" group.long 0x10++0x03 line.long 0x00 "CKCTRL,Clock Control Register" bitfld.long 0x00 31. "LOCK,Lock Register" "0: Register writes are allowed,1: Register writes are blocked" bitfld.long 0x00 0.--2. "CKMODE,Clocking Mode" "0: No clock gating,1: Core clock is gated,?,3: Core and platform clocks are gated,?,?,?,7: Core platform bus and slow clocks are gated" group.long 0x14++0x03 line.long 0x00 "CKSTAT,Clock Status Register" eventfld.long 0x00 31. "VALID,Clock Status Valid" "0: Core clock not gated,1: Core clock was gated due to low power mode.." rbitfld.long 0x00 8.--13. "WAKEUP,Wakeup Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 0.--2. "CKMODE,Low Power Status" "0: Core clock not gated,1: Core clock was gated,?,3: Core and platform clocks were gated,?,?,?,7: Core platform bus and slow clocks were gated" group.long 0x18++0x03 line.long 0x00 "AD_PMPROT,Power Mode Protection Register" bitfld.long 0x00 31. "LOCK,Lock Register" "0: Register writes are allowed,1: Register writes are blocked" bitfld.long 0x00 5. "AHLD,Allow Hold" "0: Hold is not allowed,1: Hold is allowed" newline bitfld.long 0x00 4. "ADPD,Allow Deep Power Down" "0: Deep Power Down is not allowed,1: Deep Power Down is allowed" bitfld.long 0x00 3. "APD,Allow Power Down" "0: Power Down is not allowed,1: Power Down is allowed" newline bitfld.long 0x00 2. "APA,Allow Partial Active" "0: Partial Active is not allowed,1: Partial Active is allowed" bitfld.long 0x00 1. "ADS,Allow Deep Sleep" "0: Deep Sleep is not allowed,1: Deep Sleep is allowed" newline bitfld.long 0x00 0. "AS,Allow Sleep" "0: Sleep is not allowed,1: Sleep is allowed" group.long 0x20++0x03 line.long 0x00 "AD_PMCTRL,AD Power Mode Control Register" bitfld.long 0x00 0.--5. "AD_LPMODE,Low Power Mode" "0: LPMODE0,1: LPMODE1,?,3: Deep Sleep,?,?,?,7: Partial Active,?,?,?,?,?,?,?,15: Power Down,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Deep Power Down,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,63: LPMODE6" group.long 0x50++0x03 line.long 0x00 "AD_A35CORE0_LPMODE,AD A35 CORE0 Low Power Mode Control Register" bitfld.long 0x00 0.--1. "A35CORE0_LPMODE,Low Power Mode" "0: A35 CORE0 Active(ACT),1: A35 CORE0 Standby(STDB),?,3: A35 CORE0 PowerDown(PD)" group.long 0x54++0x03 line.long 0x00 "AD_A35CORE1_LPMODE,AD A35 CORE1 Low Power Mode Control Register" bitfld.long 0x00 0.--1. "A35CORE1_LPMODE,Low Power Mode" "0: A35 CORE1 Active(ACT),1: A35 CORE1 Standby(STDB),?,3: A35 CORE1 PowerDown(PD)" group.long 0x70++0x03 line.long 0x00 "AD_PSDORF,Application Domain Power Switch Domain Out of Reset Interrupt Flag Register" eventfld.long 0x00 4. "AD_PERIPH,AD_PERIPH Power switch domain out of reset interrupt flag" "0: AD_PERIPH Power Switch Domain in reset or..,1: AD_PERIPH Power switch domain out of reset.." eventfld.long 0x00 1. "A35_1,A35_Core1 Power switch domain out of reset interrupt flag" "0: A35_Core1 Power Switch Domain in reset or..,1: A35_Core0 Power switch domain out of reset.." newline eventfld.long 0x00 0. "A35_0,A35_Core0 Power switch domain out of reset interrupt flag" "0: A35_Core0 Power Switch Domain in reset or..,1: A35_Core0 Power switch domain out of reset.." group.long 0x74++0x03 line.long 0x00 "AD_PSDORIE,Application Domain Power Switch Domain Out of Reset Interrupt Enable Register" bitfld.long 0x00 4. "AD_PERIPH,AD_PERIPH Power Switch Domain Out of Reset Interrupt Enable" "0: AD_PERIPH Power Switch does not generate..,1: AD_PERIPH Power Switch generates interrupt.." bitfld.long 0x00 1. "A35_1,A35_Core1 Power Switch Domain Out of Reset Interrupt Enable" "0: A35_Core1 Power Switch does not generate..,1: A35_Core1 Power Switch generates interrupt.." newline bitfld.long 0x00 0. "A35_0,A35_Core0 Power Switch Domain Out of Reset Interrupt Enable" "0: A35_Core0 Power Switch does not generate..,1: A35_Core0 Power Switch generates interrupt.." rgroup.long 0x78++0x03 line.long 0x00 "AD_PSDS,Application Domain Power Switch Domain Status Register" bitfld.long 0x00 4. "AD_PERIPH,Application Power Switch Domain Status" "0: Application Power switch is open and not..,1: Application Power switch is closed and in.." bitfld.long 0x00 3. "FAST_NIC,Fast NIC Power Switch Domain Status" "0: Fast NIC Power switch is open and not ready..,1: Fast NIC Power switch is closed and in normal.." newline bitfld.long 0x00 2. "L2_CACHE,L2 Cache Power Switch Domain Status" "0: L2 Cache Power switch is open and not ready..,1: L2 Cache Power switch is closed and in normal.." bitfld.long 0x00 1. "A35_1,A35_Core1 Power Switch Domain Status" "0: A35_Core1 Power switch is open and not ready..,1: A35_Core1 Power switch is closed and in.." newline bitfld.long 0x00 0. "A35_0,A35_Core0 Power Switch Domain Status" "0: A35_Core0 Power switch is open and not ready..,1: A35_Core0 Power switch is closed and in.." rgroup.long 0x80++0x03 line.long 0x00 "SRS,System Reset Status Register" bitfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Reset is not generated from the WDOG_HIFI4..,1: Reset is generated from the WDOG_HIFI4 timeout" bitfld.long 0x00 25. "WDOG_S_AD,Watchdog 4 Reset" "0: Reset is not generated from the WDOG_S_AD..,1: Reset is generated from the WDOG_S_AD timeout" newline bitfld.long 0x00 23. "uPOWER,uPOWER WDOG System Reset" "0: Reset not generated by uPOWER WDOG timeout,1: Reset generated by uPOWER WDOG timeout" bitfld.long 0x00 22. "LPAV_CGC_LOS,LPAV CGC Loss Of Sync" "0: Reset not generated from LPAV_CGC_LOS system..,1: Reset generated from LPAV_CGC_LOS system.." newline bitfld.long 0x00 19. "AD_CGC_LOS,AD CGC Loss Of Sync" "0: Reset not generated from CGC_LOS system reset..,1: Reset generated from CGC_LOS system reset.." bitfld.long 0x00 16. "RTD_MU,Real Time Domain MU System Reset" "0: Reset not generated from RTD_MU reset source,1: Reset generated from RTD_MU reset source" newline bitfld.long 0x00 15. "GIC_ECC,Interrupt SRAM Controller ECC Error" "0: Reset not generated by GIC SRAM ECC error,1: Reset generated by GIC SRAM ECC error" bitfld.long 0x00 14. "SW,Software Reset (SIM)" "0: Reset not generated by software request from..,1: Reset generated by software request from core" newline bitfld.long 0x00 13. "WDOG_AD,Watchdog 3 Reset" "0: Reset is not generated from the WatchDog 0..,1: Reset is generated from the WatchDog 0 timeout" bitfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Reset not generated by Low Power Acknowledge..,1: Reset generated by Low Power Acknowledge.." newline bitfld.long 0x00 10. "RSTACK,Reset Timeout" "0: Reset not generated from Reset Controller..,1: Reset generated from Reset Controller Timeout" bitfld.long 0x00 8. "PIN,Pin Reset" "0: Reset was not generated from the assertion of..,1: Reset was generated from the assertion of.." newline bitfld.long 0x00 5. "FATAL,Fatal Reset" "0: Reset was not generated by a fatal reset source,1: Reset was generated by a fatal reset source" bitfld.long 0x00 4. "WARM,Warm Reset" "0: Reset not generated by Warm Reset source,1: Reset generated by Warm Reset source" newline bitfld.long 0x00 2. "HLVD,High or Low Voltage Detect Reset" "0: Reset not generated by HLVD,1: Reset generated by HLVD" bitfld.long 0x00 1. "POR,Power On Reset" "0: Reset not generated by POR,1: Reset generated by POR" newline bitfld.long 0x00 0. "WAKEUP,Wakeup Reset" "0: Reset not generated by wakeup from Power Down..,1: Reset generated by wakeup from Power Down or.." group.long 0x88++0x03 line.long 0x00 "SSRS,Sticky System Reset Status Register" eventfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Reset is not generated from the WDOG_HIFI4..,1: Reset is generated from the WDOG_HIFI4 timeout" eventfld.long 0x00 25. "WDOG_S_AD,Watchdog 4 Reset" "0: Reset is not generated from the WatchDog 1..,1: Reset is generated from the WatchDog 1 timeout" newline eventfld.long 0x00 23. "uPOWER,uPOWER WDOG System Reset" "0: Reset not generated by uPOWER WDOG timeout,1: Reset generated by uPOWER WDOG timeout" eventfld.long 0x00 22. "LPAV_CGC_LOS,LPAV CGC Loss Of Sync" "0: Reset not generated from LPAV_CGC_LOS system..,1: Reset generated from LPAV_CGC_LOS system.." newline eventfld.long 0x00 19. "AD_CGC_LOS,AD CGC Loss Of Sync" "0: Reset not generated from CGC_LOS system reset..,1: Reset generated from CGC_LOS system reset.." eventfld.long 0x00 16. "RTD_MU,Real Time Domain MU Reset" "0: Reset not generated from Core0 reset source,1: Reset generated from Core0 reset source" newline eventfld.long 0x00 15. "GIC_ECC,Interrupt SRAM Controller ECC Error" "0: Reset not generated by GIC SRAM ECC error,1: Reset generated by GIC SRAM ECC error" eventfld.long 0x00 14. "SW,Software Reset" "0: Reset not generated by software request from..,1: Reset generated by software request from core" newline eventfld.long 0x00 13. "WDOG_AD,Watchdog 3 Reset" "0: Reset is not generated from the WatchDog 0..,1: Reset is generated from the WatchDog 0 timeout" eventfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Reset not generated by Low Power Acknowledge..,1: Reset generated by Low Power Acknowledge.." newline eventfld.long 0x00 10. "RSTACK,Reset Timeout" "0: Reset not generated from Reset Controller..,1: Reset generated from Reset Controller Timeout" eventfld.long 0x00 8. "PIN,Pin Reset" "0: Reset was not generated from the RESET_B pin,1: Reset was generated from the RESET_B pin" newline eventfld.long 0x00 5. "FATAL,Fatal Reset" "0: Reset was not generated by a fatal reset source,1: Reset was generated by a fatal reset source" eventfld.long 0x00 4. "WARM,Warm Reset" "0: Reset not generated by warm reset source,1: Reset generated by warm reset source" newline eventfld.long 0x00 2. "HLVD,High or Low Voltage Detect Reset" "0: Reset not generated by HLVD,1: Reset generated by HLVD" eventfld.long 0x00 1. "POR,Power On Reset" "0: Reset not generated by POR,1: Reset generated by POR" newline eventfld.long 0x00 0. "WAKEUP,Wakeup Reset" "0: Reset not generated by wakeup from DPD mode,1: Reset generated by wakeup from DPD mode" group.long 0x8C++0x03 line.long 0x00 "SRIE,System Reset Interrupt Enable Register" bitfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 25. "WDOG_S_AD,Watchdog 4 Reset" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 16. "RTD_MU,Real Time Domain MU Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 15. "GIC_ECC,Application domain Interrupt Controller ECC Error Event" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 14. "SW,Software Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 13. "WDOG_AD,Watchdog_AD Reset" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Interrupt disabled,1: Interrupt enabled" group.long 0x90++0x03 line.long 0x00 "SRIF,System Reset Interrupt Flag Register" eventfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 25. "WDOG_S_AD,Watchdog 4 Reset" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 16. "RTD_MU,Real Time Domain MU Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 15. "GIC_ECC,Application domain Interrupt Controller ECC Error Event" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 14. "SW,Software Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 13. "WDOG_AD,Watchdog_AD Reset" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Reset source not pending,1: Reset source pending" group.long 0xA0++0x03 line.long 0x00 "MR0,Mode Register" hexmask.long 0x00 0.--31. 1. "BOOTCFG,Boot Configuration" group.long 0xB0++0x03 line.long 0x00 "FM0,Force Mode Register" hexmask.long 0x00 0.--31. 1. "FORCECFG,Boot Configuration" group.long 0x110++0x03 line.long 0x00 "CORECTL,Core Control Register" bitfld.long 0x00 0. "NPIE,Non maskable Pin Interrupt Enable" "0: Pin interrupt disabled,1: Pin interrupt enabled" group.long 0x120++0x03 line.long 0x00 "DBGCTL,Debug Control Register" bitfld.long 0x00 0. "SOD,Sleep Or Debug" "0: Debug remains enabled when Core is sleeping,1: Debug is disabled when Core is sleeping" tree.end tree "CMC_LPAC" base ad:0x2DA40000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" group.long 0x70++0x03 line.long 0x00 "LPAV_PSDORF,Audio Video Domain Power Switch Domain Out of Reset Interrupt Flag Register" eventfld.long 0x00 6. "NIC_AV,NIC_AV/Periph Power Switch Domain Out of Reset Interrupt Flag" "0: NIC_AV/Periph Power Switch Domain in reset or..,1: NIC_AV/Periph Power switch domain out of.." eventfld.long 0x00 5. "MIPI_CSI,MIPI-CSI Power Switch Domain Out of Reset Interrupt Flag" "0: MIPI-CSI Power Switch Domain in reset or user..,1: MIPI-CSI Power switch domain out of reset.." newline eventfld.long 0x00 4. "MIPI_DSI,MIPI-DSI Power Switch Domain Out of Reset Interrupt Flag" "0: MIPI-DSI Power Switch Domain in reset or user..,1: MIPI-DSI Power switch domain out of reset.." eventfld.long 0x00 3. "PXP_EPDC,PXP/EPDC Power Switch Domain Out of Reset Interrupt Flag" "0: PXP/EPDC Power Switch Domain in reset or user..,1: PXP/EPDC Power switch domain out of reset.." newline eventfld.long 0x00 2. "DDR,DDR Power Switch Domain Out of Reset Interrupt Flag" "0: DDR Power Switch Domain in reset or user has..,1: DDR Power switch domain out of reset.." eventfld.long 0x00 1. "HIFI4,HIFI4 Power Switch Domain Out of Reset Interrupt Flag" "0: HIFI4 Power Switch Domain in reset or user..,1: HIFI4 Power switch domain out of reset.." newline eventfld.long 0x00 0. "GPU3D,GPU3D Power Switch Domain Out of Reset Interrupt Flag" "0: GPU3D Power Switch Domain in reset or user..,1: GPU3D Power switch domain out of reset.." group.long 0x74++0x03 line.long 0x00 "LPAV_PSDORIE,Audio Video Domain Power Switch Domain Out of Reset Interrupt Enable Register" bitfld.long 0x00 6. "NIC_AV,NIC_AV/Periph Power Switch Domain Out of Reset Interrupt Enable" "0: NIC_AV/Periph Power Switch does not generate..,1: NIC_AV/Periph Power Switch generates.." bitfld.long 0x00 5. "MIPI_CSI,MIPI-CSI Power Switch Domain Out of Reset Interrupt Enable" "0: MIPI-CSI Power Switch does not generate..,1: MIPI-CSI Power Switch generates interrupt.." newline bitfld.long 0x00 4. "MIPI_DSI,MIPI-DSI Power Switch Domain Out of Reset Interrupt Enable" "0: MIPI-DSI Power Switch does not generate..,1: MIPI-DSI Power Switch generates interrupt.." bitfld.long 0x00 3. "PXP_EPDC,PXP/EPDC Power Switch Domain Out of Reset Interrupt Enable" "0: PXP/EPDC Power Switch does not generate..,1: PXP/EPDC Power Switch generates interrupt.." newline bitfld.long 0x00 2. "DDR,DDR Power Switch Domain Out of Reset Interrupt Enable" "0: DDR Power Switch does not generate interrupt..,1: DDR Power Switch generates interrupt when.." bitfld.long 0x00 1. "HIFI4,HIFI4 Power Switch Domain Out of Reset Interrupt Enable" "0: HIFI4 Power Switch does not generate..,1: HIFI4 Power Switch generates interrupt when.." newline bitfld.long 0x00 0. "GPU3D,GPU3D Power Switch Domain Out of Reset Interrupt Enable" "0: GPU3D Power Switch does not generate..,1: GPU3D Power Switch generates interrupt when.." rgroup.long 0x78++0x03 line.long 0x00 "LPAV_PSDS,Audio Video Domain Power Switch Domain Status Register" bitfld.long 0x00 6. "NIC_AV,NIC_AV/Periph Power Switch Domain Status" "0: NIC_AV/Periph Power switch is open and not..,1: NIC_AV/Periph Power switch is closed and in.." bitfld.long 0x00 5. "MIPI_CSI,MIPI-CSI Power Switch Domain Status" "0: MIPI-CSI Power switch is open and not ready..,1: MIPI-CSI Power switch is closed and in normal.." newline bitfld.long 0x00 4. "MIPI_DSI,MIPI-DSI Power Switch Domain Status" "0: MIPI-DSI Power switch is open and not ready..,1: MIPI-DSI Power switch is closed and in normal.." bitfld.long 0x00 3. "PXP_EPDC,PXP/EPDC Power Switch Domain Status" "0: PXP/EPDC Power switch is open and not ready..,1: PXP/EPDC Power switch is closed and in normal.." newline bitfld.long 0x00 2. "DDR,DDR Power Switch Domain Status" "0: DDR Power switch is open and not ready for..,1: DDR Power switch is closed and in normal.." bitfld.long 0x00 1. "HIFI4,HIFI4 Power Switch Domain Status" "0: HIFI4 Power switch is open and not ready for..,1: HIFI4 Power switch is closed and in normal.." newline bitfld.long 0x00 0. "GPU3D,GPU3D Power Switch Domain Status" "0: GPU3D Power switch is open and not ready for..,1: GPU3D Power switch is closed and in normal.." tree.end tree "CMC_RTD" base ad:0x28025000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" group.long 0x10++0x03 line.long 0x00 "CKCTRL,Clock Control Register" bitfld.long 0x00 31. "LOCK,Lock Register" "0: Register writes are allowed,1: Register writes are blocked" bitfld.long 0x00 0.--2. "CKMODE,Clocking Mode" "0: No clock gating,1: Core clock is gated,?,3: Core and platform clocks are gated,?,?,?,7: Core platform bus and slow clocks are gated" group.long 0x14++0x03 line.long 0x00 "CKSTAT,Clock Status Register" eventfld.long 0x00 31. "VALID,Clock Status Valid" "0: Core clock not gated,1: Core clock was gated due to low power mode.." rbitfld.long 0x00 8.--12. "WAKEUP,Wakeup Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 0.--2. "CKMODE,Low Power Status" "0: Core clock not gated,1: Core clock was gated,?,3: Core and platform clocks were gated,?,?,?,7: Core platform bus and slow clocks were gated" group.long 0x18++0x03 line.long 0x00 "RTD_PMPROT,Power Mode Protection Register" bitfld.long 0x00 31. "LOCK,Lock Register" "0: Register writes are allowed,1: Register writes are blocked" bitfld.long 0x00 4. "AHLD,Allow Hold" "0: Hold is not allowed,1: Hold is allowed" newline bitfld.long 0x00 3. "ADPD,Allow Deep Power Down" "0: Deep Power Down is not allowed,1: Deep Power Down is allowed" bitfld.long 0x00 2. "APD,Allow Power Down" "0: Power Down is not allowed,1: Power Down is allowed" newline bitfld.long 0x00 1. "ADS,Allow Deep Sleep" "0: Deep Sleep is not allowed,1: Deep Sleep is allowed" bitfld.long 0x00 0. "AS,Allow Sleep" "0: Sleep is not allowed,1: Sleep is allowed" group.long 0x20++0x03 line.long 0x00 "RTD_PMCTRL,Real Time Domain Power Mode Control Register" bitfld.long 0x00 0.--4. "RTD_LPMODE,Low Power Mode" "0: LPMODE0,1: LPMODE1,?,3: Deep Sleep,?,?,?,7: Power Down,?,?,?,?,?,?,?,15: Deep Power Down,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: LPMODE5" group.long 0x70++0x03 line.long 0x00 "RTD_PSDORF,Real Time Domain Power Switch Domain Out of Reset Interrupt Flag" eventfld.long 0x00 2. "Fusion_AO,Fusion Always ON Power Switch Domain Out of Reset Interrupt Flag" "0: Fusion Always ON Power Switch Domain in reset..,1: Fusion Always ON Power switch domain out of.." eventfld.long 0x00 1. "Fusion,Fusion Power Switch Domain Out of Reset Interrupt Flag" "0: Fusion Power Switch Domain in reset or user..,1: Fusion Power switch domain out of reset.." group.long 0x74++0x03 line.long 0x00 "RTD_PSDORIE,Real Time Domain Power Switch Domain Out of Reset Interrupt Enable" bitfld.long 0x00 2. "Fusion_AO,Fusion Always ON Power Switch Domain Out of Reset Interrupt Enable" "0: Fusion Always ON Power Switch does not..,1: Fusion Always ON Power Switch generates.." bitfld.long 0x00 1. "Fusion,Fusion Power Switch Domain Out of Reset Interrupt Enable" "0: Fusion Power Switch does not generate..,1: Fusion Power Switch generates interrupt when.." rgroup.long 0x78++0x03 line.long 0x00 "RTD_PSDS,Real Time Domain Power Switch Domain Status" bitfld.long 0x00 2. "Fusion_AO,Fusion Always ON Power Switch Domain Status" "0: Fusion Always ON Power switch is open and not..,1: Fusion Always ON Power switch is closed and.." bitfld.long 0x00 1. "Fusion,Fusion Power Switch Domain Status" "0: Fusion Power switch is open and not ready for..,1: Fusion Power switch is closed and in normal.." newline bitfld.long 0x00 0. "RTD,Realtime Power Switch Domain Status" "0: Realtime Power switch is open and not ready..,1: Realtime Power switch is closed and in normal.." rgroup.long 0x80++0x03 line.long 0x00 "SRS,System Reset Status" bitfld.long 0x00 31. "SSF,Sentinel System Fail Reset" "0: Reset not generated by SSF,1: Reset generated by SSF" bitfld.long 0x00 30. "SRR,Sentinel Reset Request" "0: Reset not generated by SRR,1: Reset generated by SRR" newline bitfld.long 0x00 29. "SLB,Sentinel Lifecycle Bricked Reset" "0: Reset not generated by Sentinel Lifecycle check,1: Reset generated by Sentinel Lifecycle check" bitfld.long 0x00 28. "JTAG,JTAG System Reset" "0: Reset not generated by JTAG system reset,1: Reset generated by JTAG system reset" newline bitfld.long 0x00 27. "WDOG_FUSION,Watchdog 2 Reset" "0: Reset is not generated from the WDOG_FUSION..,1: Reset is generated from the WDOG_FUSION timeout" bitfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Reset is not generated from the WDOG_HIFI4..,1: Reset is generated from the WDOG_HIFI4 timeout" newline bitfld.long 0x00 25. "WDOG_S_RTD,Watchdog 1 Reset" "0: Reset is not generated from the WDOG_S_RTD..,1: Reset is generated from the WDOG_S_RTD timeout" bitfld.long 0x00 24. "VBAT,VBAT System Reset" "0: Reset not generated by VBAT system reset,1: Reset generated by VBAT system reset" newline bitfld.long 0x00 23. "uPOWER,uPOWER WDOG System Reset" "0: Reset not generated by uPOWER WDOG timeout,1: Reset generated by uPOWER WDOG timeout" bitfld.long 0x00 22. "LPAV_CGC_LOS,LPAV Clock Generation and Control Loss Of Sync" "0: Reset not generated from LPAV_CGC_LOS system..,1: Reset generated from LPAV_CGC_LOS system.." newline bitfld.long 0x00 19. "RTD_CGC_LOS,RTD Clock Generation and Control Loss Of Sync" "0: Reset not generated from RTD_CGC_LOS system..,1: Reset generated from RTD_CGC_LOS system reset.." bitfld.long 0x00 16. "AD_MU,Application Domain MU System Reset" "0: Reset not generated from AD_MU reset source,1: Reset generated from AD_MU reset source" newline bitfld.long 0x00 15. "LOCKUP,Lockup Reset" "0: Reset not generated by core lockup or exception,1: Reset generated by core lockup or exception" bitfld.long 0x00 14. "SW,Software Reset" "0: Reset not generated by software request from..,1: Reset generated by software request from core" newline bitfld.long 0x00 13. "WDOG0,Watchdog 0 Reset" "0: Reset is not generated from the WatchDog 0..,1: Reset is generated from the WatchDog 0 timeout" bitfld.long 0x00 12. "RTD_CGC_LOC,Real Time Domain Clock Generation and Control Loss-of-Clock Reset" "0: Reset is not generated from an RTD_CGC loss..,1: Reset is generated from an RTD_CGC loss of.." newline bitfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Reset not generated by Low Power Acknowledge..,1: Reset generated by Low Power Acknowledge.." bitfld.long 0x00 10. "RSTACK,Reset Timeout" "0: Reset not generated from Reset Controller..,1: Reset generated from Reset Controller Timeout" newline bitfld.long 0x00 9. "ISP_AP,In-System Programming Access Port Reset" "0: Reset was not generated from a ISP_AP reset..,1: Reset was generated from a ISP_AP reset request" bitfld.long 0x00 8. "PIN,Pin Reset" "0: Reset was not generated from the assertion of..,1: Reset was generated from the assertion of.." newline bitfld.long 0x00 5. "FATAL,Fatal Reset" "0: Reset was not generated by a fatal reset source,1: Reset was generated by a fatal reset source" bitfld.long 0x00 4. "WARM,Warm Reset" "0: Reset not generated by Warm Reset source,1: Reset generated by Warm Reset source" newline bitfld.long 0x00 2. "HLVD,High or Low Voltage Detect Reset" "0: Reset not generated by HLVD,1: Reset generated by HLVD" bitfld.long 0x00 1. "POR,Power-On Reset" "0: Reset not generated by POR,1: Reset generated by POR" newline bitfld.long 0x00 0. "WAKEUP,Wakeup Reset" "0: Reset not generated by wakeup from Power Down..,1: Reset generated by wakeup from Power Down or.." group.long 0x88++0x03 line.long 0x00 "SSRS,Sticky System Reset Status" eventfld.long 0x00 31. "SFF,Sentinel System Fail Reset" "0: Reset not generated by SFF,1: Reset generated by SFF" eventfld.long 0x00 30. "SRR,Sentinel Reset Request" "0: Reset not generated by SRR,1: Reset generated by SRR" newline eventfld.long 0x00 29. "SLB,Sentinel Lifecycle Bricked Reset" "0: Reset not generated by Sentinel Lifecycle check,1: Reset generated by Sentinel Lifecycle check" eventfld.long 0x00 28. "JTAG,JTAG System Reset" "0: Reset not generated by JTAG system reset,1: Reset generated by JTAG system reset" newline eventfld.long 0x00 27. "WDOG_FUSION,Watchdog 2 Reset" "0: Reset is not generated from the WDOG_FUSION..,1: Reset is generated from the WDOG_FUSION timeout" eventfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Reset is not generated from the WDOG_HIFI4..,1: Reset is generated from the WDOG_HIFI4 timeout" newline eventfld.long 0x00 25. "WDOG_S_RTD,Watchdog 1 Reset" "0: Reset is not generated from the WDOG_S_RTD..,1: Reset is generated from the WDOG_S_RTD timeout" eventfld.long 0x00 24. "VBAT,VBAT System Reset" "0: Reset not generated by VBAT system reset,1: Reset generated by VBAT system reset" newline eventfld.long 0x00 23. "uPOWER,uPOWER WDOG System Reset" "0: Reset not generated by uPOWER WDOG timeout,1: Reset generated by uPOWER WDOG timeout" eventfld.long 0x00 22. "LPAV_CGC_LOS,LPAV Clock Generation and Control Loss Of Sync" "0: Reset not generated from LPAV_CGC_LOS system..,1: Reset generated from LPAV_CGC_LOS system.." newline eventfld.long 0x00 19. "RTD_CGC_LOS,RTD Clock Generation and Control Loss Of Sync" "0: Reset not generated from RTD_CGC_LOS system..,1: Reset generated from RTD_CGC_LOS system reset.." eventfld.long 0x00 16. "AD_MU,Application Domain MU System Reset" "0: Reset not generated from AD_MU reset source,1: Reset generated from AD_MU reset source" newline eventfld.long 0x00 15. "LOCKUP,Lockup Reset" "0: Reset not generated by core lockup,1: Reset generated by core lockup" eventfld.long 0x00 14. "SW,Software Reset" "0: Reset not generated by software request from..,1: Reset generated by software request from core" newline eventfld.long 0x00 13. "WDOG0,Watchdog 0 Reset" "0: Reset is not generated from the WatchDog 0..,1: Reset is generated from the WatchDog 0 timeout" eventfld.long 0x00 12. "RTD_CGC_LOC,RTD Clock Generation and Control Loss-of-Clock Reset" "0: Reset is not generated from an RTD CGC loss..,1: Reset is generated from an RTDF CGC loss of.." newline eventfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Reset not generated by Low Power Acknowledge..,1: Reset generated by Low Power Acknowledge.." eventfld.long 0x00 10. "RSTACK,Reset Timeout" "0: Reset not generated from Reset Controller..,1: Reset generated from Reset Controller Timeout" newline eventfld.long 0x00 9. "ISP_AP,In-System Programming Access Port Reset" "0: Reset was not generated from a Debug Access..,1: Reset was generated from a Debug Access Port.." eventfld.long 0x00 8. "PIN,Pin Reset" "0: Reset was not generated from the RESET_B pin,1: Reset was generated from the RESET_B pin" newline eventfld.long 0x00 5. "FATAL,Fatal Reset" "0: Reset was not generated by a fatal reset source,1: Reset was generated by a fatal reset source" eventfld.long 0x00 4. "WARM,Warm Reset" "0: Reset not generated by warm reset source,1: Reset generated by warm reset source" newline eventfld.long 0x00 2. "HLVD,High or Low Voltage Detect Reset" "0: Reset not generated by HLVD,1: Reset generated by HLVD" eventfld.long 0x00 1. "POR,Power-On Reset" "0: Reset not generated by POR,1: Reset generated by POR" newline eventfld.long 0x00 0. "WAKEUP,Wakeup Reset" "0: Reset not generated by wakeup from DPD mode,1: Reset generated by wakeup from DPD mode" group.long 0x8C++0x03 line.long 0x00 "SRIE,System Reset Interrupt Enable" bitfld.long 0x00 27. "WDOG_FUSION,Watchdog 2 Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 25. "WDOG_S_RTD,Watchdog 1 Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 16. "AD_MU,Application Domain MU System Reset" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 15. "LOCKUP,Lockup Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 14. "SW,Software Reset" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 13. "WDOG0,Watchdog 0 Reset" "0: Interrupt disabled,1: Interrupt enabled" bitfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Interrupt disabled,1: Interrupt enabled" newline bitfld.long 0x00 9. "ISP_AP,In-System Programming Access Port Reset" "0: Interrupt disabled,1: Interrupt enabled" group.long 0x90++0x03 line.long 0x00 "SRIF,System Reset Interrupt Flag" eventfld.long 0x00 27. "WDOG_FUSION,Watchdog 2 Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 26. "WDOG_HIFI4,Watchdog 5 Reset" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 25. "WDOG_S_RTD,Watchdog 1 Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 16. "AD_MU,Application Domain MU System Reset" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 15. "LOCKUP,Lockup Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 14. "SW,Software Reset" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 13. "WDOG0,Watchdog 0 Reset" "0: Reset source not pending,1: Reset source pending" eventfld.long 0x00 11. "LPACK,Low Power Acknowledge Timeout Reset" "0: Reset source not pending,1: Reset source pending" newline eventfld.long 0x00 9. "ISP_AP,In-System Programming Access Port Reset" "0: Reset source not pending,1: Reset source pending" group.long 0xA0++0x03 line.long 0x00 "MR0,Mode Register" hexmask.long 0x00 0.--31. 1. "BOOTCFG,Boot Configuration" group.long 0xB0++0x03 line.long 0x00 "FM0,Force Mode Register" hexmask.long 0x00 0.--31. 1. "FORCECFG,Boot Configuration" group.long 0x110++0x03 line.long 0x00 "CORECTL,Core Control Register" bitfld.long 0x00 0. "NPIE,Non maskable Pin Interrupt Enable" "0: Pin interrupt disabled,1: Pin interrupt enabled" group.long 0x120++0x03 line.long 0x00 "DBGCTL,Debug Control Register" bitfld.long 0x00 0. "SOD,Sleep Or Debug" "0: Debug remains enabled when Core is sleeping,1: Debug is disabled when Core is sleeping" tree.end tree.end tree "CMP" repeat 2. (list 0. 1.) (list ad:0x28041000 ad:0x28042000) tree "CMP$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long 0x00 0.--31. 1. "PARAM,Parameter Registers" group.long 0x08++0x03 line.long 0x00 "C0,CMP Control Register 0" bitfld.long 0x00 31. "LINKEN,CMP to DAC link enable" "0: CMP to DAC link is disabled,1: CMP to DAC link is enabled" bitfld.long 0x00 30. "DMAEN,DMA Enable" "0: DMA is disabled,1: DMA is enabled" newline bitfld.long 0x00 28. "IER,Comparator Interrupt Enable Rising" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 27. "IEF,Comparator Interrupt Enable Falling" "0: Interrupt is disabled,1: Interrupt is enabled" newline eventfld.long 0x00 26. "CFR,Analog Comparator Flag Rising" "0: A rising edge has not been detected on COUT,1: A rising edge on COUT has occurred" eventfld.long 0x00 25. "CFF,Analog Comparator Flag Falling" "0: A falling edge has not been detected on COUT,1: A falling edge on COUT has occurred" newline rbitfld.long 0x00 24. "COUT,Analog Comparator Output" "0,1" hexmask.long.byte 0x00 16.--23. 1. "FPR,Filter Sample Period" newline bitfld.long 0x00 15. "SE,Sample Enable" "0: Sampling mode is not selected,1: Sampling mode is selected" bitfld.long 0x00 14. "WE,Windowing Enable" "0: Windowing mode is not selected,1: Windowing mode is selected" newline bitfld.long 0x00 12. "PMODE,Power Mode Select" "0: Low Speed (LS) comparison mode is selected,1: High Speed (HS) comparison mode is selected" bitfld.long 0x00 11. "INVT,Comparator invert" "0: Does not invert the comparator output,1: Inverts the comparator output" newline bitfld.long 0x00 10. "COS,Comparator Output Select" "0: Set CMPO to equal COUT (filtered comparator..,1: Set CMPO to equal COUTA (unfiltered.." bitfld.long 0x00 9. "OPE,Comparator Output Pin Enable" "0: When OPE is 0 the comparator output (after..,1: When OPE is 1 and if the software has.." newline bitfld.long 0x00 8. "EN,Comparator Module Enable" "0: Analog Comparator is disabled,1: Analog Comparator is enabled" bitfld.long 0x00 4.--6. "FILTER_CNT,Filter Sample Count" "0: Filter is disabled,1: 1 consecutive sample must agree (comparator..,2: 2 consecutive samples must agree,3: 3 consecutive samples must agree,4: 4 consecutive samples must agree,5: 5 consecutive samples must agree,6: 6 consecutive samples must agree,7: 7 consecutive samples must agree" newline bitfld.long 0x00 0.--1. "HYSTCTR,Comparator hard block hysteresis control" "0: The hard block output has level 0 hysteresis..,1: The hard block output has level 1 hysteresis..,2: The hard block output has level 2 hysteresis..,3: The hard block output has level 3 hysteresis.." group.long 0x0C++0x03 line.long 0x00 "C1,CMP Control Register 1" bitfld.long 0x00 28.--30. "PSEL,Plus Input MUX Control" "0: Internal Positive Input 0 for Plus Channel --..,1: External Input 1 for Plus Channel --..,2: External Input 2 for Plus Channel --..,3: External Input 3 for Plus Channel --..,4: External Input 4 for Plus Channel --..,5: External Input 5 for Plus Channel --..,6: External Input 6 for Plus Channel --..,7: Internal 8b DAC output" bitfld.long 0x00 24.--26. "MSEL,Minus Input MUX Control" "0: Internal Negative Input 0 for Minus Channel..,1: External Input 1 for Minus Channel --..,2: External Input 2 for Minus Channel --..,3: External Input 3 for Minus Channel --..,4: External Input 4 for Minus Channel --..,5: External Input 5 for Minus Channel --..,6: External Input 6 for Minus Channel --..,7: Internal 8b DAC output" newline bitfld.long 0x00 21. "CHN5,Channel 5 input enable" "0,1" bitfld.long 0x00 20. "CHN4,Channel 4 input enable" "0,1" newline bitfld.long 0x00 19. "CHN3,Channel 3 input enable" "0,1" bitfld.long 0x00 18. "CHN2,Channel 2 input enable" "0,1" newline bitfld.long 0x00 17. "CHN1,Channel 1 input enable" "0,1" bitfld.long 0x00 16. "CHN0,Channel 0 input enable" "0,1" newline bitfld.long 0x00 10. "DACEN,DAC Enable" "0: DAC is disabled,1: DAC is enabled" bitfld.long 0x00 9. "VRSEL,Supply Voltage Reference Source Select" "0: Vin1 is selected as resistor ladder network..,1: Vin2 is selected as resistor ladder network.." newline bitfld.long 0x00 8. "DMODE,DAC Mode Selection" "0: DAC is selected to work in low speed and low..,1: DAC is selected to work in high speed high.." hexmask.long.byte 0x00 0.--7. 1. "VOSEL,DAC Output Voltage Select" group.long 0x10++0x03 line.long 0x00 "C2,CMP Control Register 2" bitfld.long 0x00 30. "RRIE,Round-Robin interrupt enable" "0: The round-robin interrupt is disabled,1: The round-robin interrupt is enabled when a.." bitfld.long 0x00 29. "FXMP,Fixed MUX Port" "0: The Plus port is fixed,1: The Minus port is fixed" newline bitfld.long 0x00 25.--27. "FXMXCH,Fixed channel selection" "0: External Reference Input 0 is selected as the..,1: External Reference Input 1 is selected as the..,2: External Reference Input 2 is selected as the..,3: External Reference Input 3 is selected as the..,4: External Reference Input 4 is selected as the..,5: External Reference Input 5 is selected as the..,?,7: The 8bit DAC is selected as the fixed.." eventfld.long 0x00 21. "CH5F,CH5F" "0,1" newline eventfld.long 0x00 20. "CH4F,CH4F" "0,1" eventfld.long 0x00 19. "CH3F,CH3F" "0,1" newline eventfld.long 0x00 18. "CH2F,CH2F" "0,1" eventfld.long 0x00 17. "CH1F,CH1F" "0,1" newline eventfld.long 0x00 16. "CH0F,CH0F" "0,1" bitfld.long 0x00 14.--15. "NSAM,Number of sample clocks" "0: The comparison result is sampled as soon as..,1: The sampling takes place 1 round-robin clock..,2: The sampling takes place 2 round-robin clock..,3: The sampling takes place 3 round-robin clock.." newline bitfld.long 0x00 8.--13. "INITMOD,Comparator and DAC initialization delay modulus" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "ACOn,ACOn" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x14++0x03 line.long 0x00 "C3,CMP Control Register 3" bitfld.long 0x00 28. "PCHCTEN,Positive Channel Continuous Mode Enable" "0: Positive channel is in Discrete Mode and..,1: Positive channel is in Continuous Mode and no.." bitfld.long 0x00 24. "NCHCTEN,Negative Channel Continuous Mode Enable" "0: Negative channel is in Discrete Mode and..,1: Negative channel is in Continuous Mode and no.." newline bitfld.long 0x00 20. "RDIVE,Resistor Divider Enable" "0: The resistor is not enabled even when either..,1: The resistor is enabled because the inputs.." bitfld.long 0x00 16. "DMCS,Discrete Mode Clock Selection" "0: Slow clock is selected for the timing..,1: Fast clock is selected for the timing.." newline bitfld.long 0x00 12.--14. "ACSAT,Analog Comparator Sampling Time control" "0: The sampling time equals to T,1: The sampling time equasl to 2*T,2: The sampling time equasl to 4*T,3: The sampling time equasl to 8*T,4: The sampling time equasl to 16*T,5: The sampling time equasl to 32*T,6: The sampling time equasl to 64*T,7: The sampling time equasl to 256*T" bitfld.long 0x00 8.--10. "ACPH1TC,Analog Comparator Phase1 Timing Control" "0: Phase1 active time in one sampling period..,1: Phase1 active time in one sampling period..,2: Phase1 active time in one sampling period..,3: Phase1 active time in one sampling period..,4: Phase1 active time in one sampling period..,5: Phase1 active time in one sampling period..,6: Phase1 active time in one sampling period..,7: Phase1 active time in one sampling period.." newline bitfld.long 0x00 4.--6. "ACPH2TC,Analog Comparator Phase2 Timing Control" "0: Phase2 active time in one sampling period..,1: Phase2 active time in one sampling period..,2: Phase2 active time in one sampling period..,3: Phase2 active time in one sampling period..,4: Phase2 active time in one sampling period..,5: Phase2 active time in one sampling period..,6: Phase2 active time in one sampling period..,7: Phase2 active time in one sampling period.." tree.end repeat.end tree.end tree "CSI_PHY_REG (CSI2_RX)" base ad:0x2DAF0000 group.long 0x100++0x03 line.long 0x00 "CFG_NUM_LANES,Lane Configuration Register" bitfld.long 0x00 0.--1. "CFG_NUM_LANES,Sets the number of active lanes that are to be used for receiving data" "0,1,2,3" group.long 0x104++0x03 line.long 0x00 "CFG_DISABLE_DATA_LANES,Disable Data Lane Register" bitfld.long 0x00 0.--3. "CFG_DISABLE_DATA_LANES,Forces DPHY Enable_n signals to 1'b0 when register is set to 1" "0: Data Lane 0,1: Data Lane 1,?..." rgroup.long 0x108++0x03 line.long 0x00 "BIT_ERR,ECC and CRC Error Status Register" hexmask.long.word 0x00 0.--9. 1. "BIT_ERR,Captures the first Error event when either a one or two bit error occurs with only the one bit error providing position information" rgroup.long 0x10C++0x03 line.long 0x00 "IRQ_STATUS,IRQ Status Register" hexmask.long.word 0x00 0.--8. 1. "IRQ_STATUS,Status of IRQ" group.long 0x110++0x03 line.long 0x00 "IRQ_MASK,IRQ Mask Setting Register" hexmask.long.word 0x00 0.--8. 1. "IRQ_MASK,This field shows the IRQ Mask setting" rgroup.long 0x114++0x03 line.long 0x00 "ULPS_STATUS,Ultra Low Power State (ULPS) Status Register" hexmask.long.word 0x00 0.--9. 1. "ULPS_STATUS,Bit[0]: Value '1' indicates Clock Lane in ULPS state Bit[1]: Value '1' indicates Data Lane 0 in ULPS state Bit[2]: Value '1' indicates Data Lane 1 in ULPS state Bit[5]: Value '1' indicates Clock Lane in Mark state Bit[6]: Value '1' indicates.." rgroup.long 0x118++0x03 line.long 0x00 "PPI_ERRSOT_HS,ERRSot HS Status Register" bitfld.long 0x00 0.--3. "PPI_ERRSOT_HS,This field indicates PPI ErrSotHS captured status from DPHY" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x11C++0x03 line.long 0x00 "PPI_ERRSOTSYNC_HS,ErrSotSync HS Status Register" bitfld.long 0x00 0.--3. "PPI_ERRSOTSYNC_HS,This field indicates PPI ErrSotSync_HS captured status from DPHY" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x120++0x03 line.long 0x00 "PPI_ERRESC,ErrEsc Status Register" bitfld.long 0x00 0.--3. "PPI_ERRESC,This field indicates PPI ErrEsc captured status from DPHY" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x124++0x03 line.long 0x00 "PPI_ERRSYNCESC,ErrSyncEsc Status Register" bitfld.long 0x00 0.--3. "PPI_ERRSYNCESC,CSI2 RX DPHY PPI ErrSyncEsc captured status from the DPHY" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x128++0x03 line.long 0x00 "PPI_ERRCONTROL,ErrControl Status Register" bitfld.long 0x00 0.--3. "PPI_ERRCONTROL,This field indicates PPI ErrControl captured status from DPHY" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x12C++0x03 line.long 0x00 "CFG_DISABLE_PAYLOAD_0,Disable Payload 0 Register" bitfld.long 0x00 29. "DIS_PAYLOAD_RAW14,RAW14" "0,1" bitfld.long 0x00 28. "DIS_PAYLOAD_RAW12,RAW12" "0,1" newline bitfld.long 0x00 27. "DIS_PAYLOAD_RAW10,RAW10" "0,1" bitfld.long 0x00 26. "DIS_PAYLOAD_RAW8,RAW8" "0,1" newline bitfld.long 0x00 25. "DIS_PAYLOAD_RAW7,RAW7" "0,1" bitfld.long 0x00 24. "DIS_PAYLOAD_RAW6,RAW6" "0,1" newline bitfld.long 0x00 20. "DIS_PAYLOAD_RGB888,RGB888" "0,1" bitfld.long 0x00 19. "DIS_PAYLOAD_RGB666,RGB666" "0,1" newline bitfld.long 0x00 18. "DIS_PAYLOAD_RGB565,RGB565" "0,1" bitfld.long 0x00 17. "DIS_PAYLOAD_RGB555,RGB555" "0,1" newline bitfld.long 0x00 16. "DIS_PAYLOAD_RGB444,RGB444" "0,1" bitfld.long 0x00 15. "DIS_PAYLOAD_YUV422_10BIT,YUV422 10 bit" "0,1" newline bitfld.long 0x00 14. "DIS_PAYLOAD_YUV422_8BIT,YUV422 8 bit" "0,1" bitfld.long 0x00 10. "DIS_PAYLOAD_YUV420,Legacy YUV 420 8 bit" "0,1" newline bitfld.long 0x00 2. "DIS_PAYLOAD_EMBEDDED,Embedded" "0,1" bitfld.long 0x00 1. "DIS_PAYLOAD_BLANK,Blank" "0,1" newline bitfld.long 0x00 0. "DIS_PAYLOAD_NULL,Null" "0,1" group.long 0x130++0x03 line.long 0x00 "CFG_DISABLE_PAYLOAD_1,Disable Payload 1 Register" bitfld.long 0x00 16. "DIS_PAYLOAD_UNSUPPORTED,Unsupported Data Types" "0,1" bitfld.long 0x00 7. "DIS_PAYLOAD_UDEF_37,User defined type 0x37" "0,1" newline bitfld.long 0x00 6. "DIS_PAYLOAD_UDEF_36,User defined type 0x36" "0,1" bitfld.long 0x00 5. "DIS_PAYLOAD_UDEF_35,User defined type 0x35" "0,1" newline bitfld.long 0x00 4. "DIS_PAYLOAD_UDEF_34,User defined type 0x34" "0,1" bitfld.long 0x00 3. "DIS_PAYLOAD_UDEF_33,User defined type 0x33" "0,1" newline bitfld.long 0x00 2. "DIS_PAYLOAD_UDEF_32,User defined type 0x32" "0,1" bitfld.long 0x00 1. "DIS_PAYLOAD_UDEF_31,User defined type 0x31" "0,1" newline bitfld.long 0x00 0. "DIS_PAYLOAD_UDEF_30,User defined type 0x30" "0,1" tree.end tree "DAC" repeat 2. (list 0. 1.) (list ad:0x28043000 ad:0x28044000) tree "DAC$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version Identifier Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major version number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor version number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--2. "FIFOSZ,FIFO size" "0: FIFO depth is 2,1: FIFO depth is 4,2: FIFO depth is 8,3: FIFO depth is 16,4: FIFO depth is 32,5: FIFO depth is 64,6: FIFO depth is 128,7: FIFO depth is 256" wgroup.long 0x08++0x03 line.long 0x00 "DATA,DAC Data Register" hexmask.long.word 0x00 0.--11. 1. "DATA0,FIFO DATA0" group.long 0x0C++0x03 line.long 0x00 "CR,DAC Status and Control Register" hexmask.long.byte 0x00 24.--31. 1. "WML,Watermark Level Select" bitfld.long 0x00 23. "DMAEN,DMA Enable Select" "0: DMA is disabled,1: DMA is enabled" newline bitfld.long 0x00 22. "SWRST,Software reset" "0,1" bitfld.long 0x00 21. "FIFORST,FIFO Reset" "0: FIFORST_0,1: FIFO reset" newline bitfld.long 0x00 18. "UVIE,Underflow and overflow interrupt enable" "0: Underflow and overflow interrupt is disabled,1: Underflow and overflow interrupt is enabled" bitfld.long 0x00 17. "SWMD,DAC FIFO Mode Select" "0: Normal mode,1: Swing back mode" newline bitfld.long 0x00 16. "FIFOEN,FIFO Enable" "0: FIFO is disabled and only one level buffer is..,1: FIFO is enabled" bitfld.long 0x00 15. "DACEN,DAC Enable" "0: The DAC system is disabled,1: The DAC system is enabled" newline bitfld.long 0x00 14. "DACRFS,DAC Reference Select" "0: The DAC selects DACREF_1 as the reference..,1: The DAC selects DACREF_2 as the reference.." bitfld.long 0x00 13. "TRGSEL,DAC Trigger Select" "0: The DAC hardware trigger is selected,1: The DAC software trigger is selected" newline bitfld.long 0x00 12. "SWTRG,DAC Software Trigger" "0: The DAC soft trigger is not valid,1: The DAC soft trigger is valid" bitfld.long 0x00 10. "WTMIE,Watermark Interrupt Enable" "0: Watermark interrupt is disabled,1: Watermark interrupt is enabled" newline bitfld.long 0x00 9. "EMPTIE,Nearly Empty Interrupt Enable" "0: FIFO Nearly Empty interrupt is disabled,1: FIFO Nearly Empty interrupt is enabled" bitfld.long 0x00 8. "FULLIE,Full Interrupt Enable" "0: FIFO Full interrupt is disabled,1: FIFO Full interrupt is enabled" newline bitfld.long 0x00 4. "OVFF,Overflow Flag" "0: No overflow has occurred since the last time..,1: At least one FIFO overflow has occurred since.." bitfld.long 0x00 3. "UDFF,Underflow Flag" "0: No underflow has occurred since the last time..,1: At least one trigger underflow has occurred.." newline bitfld.long 0x00 2. "WMF,FIFO Watermark Status Flag" "0: The DAC buffer read pointer has not reached..,1: The DAC buffer read pointer has reached the.." bitfld.long 0x00 1. "NEMPTF,Nearly Empty Flag" "0: More than one data is available in the FIFO,1: One data is available in the FIFO" newline bitfld.long 0x00 0. "FULLF,Full Flag" "0: FIFO is not full,1: FIFO is full" rgroup.long 0x10++0x03 line.long 0x00 "PTR,DAC FIFO Pointer Register" hexmask.long.byte 0x00 16.--23. 1. "DACRFP,DACRFP" hexmask.long.byte 0x00 0.--7. 1. "DACWFP,DACWFP" group.long 0x14++0x03 line.long 0x00 "CR2,DAC Status and Control Register 2" bitfld.long 0x00 6. "IREF,Internal Current Reference Select" "0: Internal Current Reference not selected,1: Internal Current Reference selected" bitfld.long 0x00 5. "IREF1,Internal ZTC (Zero Temperature Coefficient) Current Reference Select" "0: Internal ZTC Current Reference not selected,1: Internal ZTC Current Reference selected" newline bitfld.long 0x00 4. "IREF2,Internal PTAT (Proportional To Absolute Temperature) Current Reference Select" "0: Internal PTAT Current Reference not selected,1: Internal PTAT Current Reference selected" bitfld.long 0x00 3. "BFHS,Buffer High Speed Select" "0: Buffer high speed not selected,1: Buffer high speed selected" newline bitfld.long 0x00 2. "BFMS,Buffer Middle Speed Select" "0: Buffer middle speed not selected,1: Buffer middle speed selected" bitfld.long 0x00 1. "OEN,Optional Enable" "0: Output buffer is not bypassed,1: Output buffer is bypassed" newline bitfld.long 0x00 0. "BFEN,Buffer Enable" "0: Opamp is not used as buffer,1: Opamp is used as buffer" tree.end repeat.end tree.end tree "DCNANO (LCDIF)" base ad:0x2E050000 group.long 0x1240++0x03 line.long 0x00 "FrameBufferConfig0,Frame Buffer Configuration 0" bitfld.long 0x00 29. "BACK_PRESSURE_DISABLE,Disable Back Pressure" "0: Disabled,1: Enabled" rbitfld.long 0x00 28. "FLIP_IN_PROGRESS,Flip in Progress" "0: Disabled,1: Enabled" newline rbitfld.long 0x00 24. "UNDERFLOW,Underflow" "0: Disabled,1: Enabled" bitfld.long 0x00 20. "RESET,Reset" "0: For DBI this field should be = 0,1: Enable DPI Timing start a DPI transfer" newline bitfld.long 0x00 16. "VALID,Valid" "0: Working,1: DISABLE" bitfld.long 0x00 12. "GAMMA,Gamma" "0: Disabled,1: Enabled" newline bitfld.long 0x00 9. "SWITCHPANEL,Switch Panel" "0: Disabled,1: Enabled" bitfld.long 0x00 8. "OUTPUT,Output" "0: Disabled,1: Enabled" newline bitfld.long 0x00 4. "MODE,Mode of the frame buffer" "0: DISABLE,1: TILE4x4 INPUT" bitfld.long 0x00 0.--2. "FORMAT,The format of the frame buffer" "0,1,2,3,4,5,6,7" group.long 0x1260++0x03 line.long 0x00 "FrameBufferAddress0,Starting Address of the Frame Buffer" bitfld.long 0x00 31. "TYPE,System Type" "0: system,1: Virtual system" hexmask.long 0x00 0.--30. 1. "ADDRESS,Address" group.long 0x1280++0x03 line.long 0x00 "FrameBufferStride0,Stride of the Frame Buffer in Bytes" hexmask.long.tbyte 0x00 0.--16. 1. "STRIDE,Number of bytes from start of one line to next line" group.long 0x1360++0x03 line.long 0x00 "DisplayDitherConfig0,Configuration for Dithering" bitfld.long 0x00 31. "ENABLE,Enable Dithering" "0: Disabled,1: Enabled" bitfld.long 0x00 16.--19. "RED_SIZE,Red Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "GREEN_SIZE,Green Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "BLUE_SIZE,Blue Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1380++0x03 line.long 0x00 "DisplayDitherTableLow0,Dither Table Low" bitfld.long 0x00 28.--31. "Y1_X3,Dither threshold value for x y=3 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "Y1_X2,Dither threshold value for x y=2 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "Y1_X1,Dither threshold value for x y=1 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "Y1_X0,Dither threshold value for x y=0 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "Y0_X3,Dither threshold value for x y=3 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "Y0_X2,Dither threshold value for x y=2 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "Y0_X1,Dither threshold value for x y=1 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "Y0_X0,Dither threshold value for x y=0 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13A0++0x03 line.long 0x00 "DisplayDitherTableHigh0,Dither Table High" bitfld.long 0x00 28.--31. "Y3_X3,Dither threshold value for x y=3 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "Y3_X2,Dither threshold value for x y=2 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "Y3_X1,Dither threshold value for x y=1 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "Y3_X0,Dither threshold value for x y=0 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "Y2_X3,Dither threshold value for x y=3 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "Y2_X2,Dither threshold value for x y=2 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "Y2_X1,Dither threshold value for x y=1 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "Y2_X0,Dither threshold value for x y=0 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C0++0x03 line.long 0x00 "PanelConfig0,Panel Configuration" bitfld.long 0x00 31. "SEQUENCING,Enable software or hardware panel sequencing" "0: hardware,1: software" bitfld.long 0x00 9. "CLOCK_POLARITY,Clock Polarity" "0: Positive,1: Negative" newline bitfld.long 0x00 8. "CLOCK,Clock Enable/Disable" "0: Disabled,1: Enabled" bitfld.long 0x00 5. "DATA_POLARITY,Data Polarity" "0: POSITIVE,1: NEGATIVE" newline bitfld.long 0x00 1. "DE_POLARITY,Data Enable Polarity" "0: POSITIVE,1: NEGATIVE" bitfld.long 0x00 0. "DE,Data Enable" "0: Disabled,1: Enabled" group.long 0x13E0++0x03 line.long 0x00 "PanelTiming0,Timing for Hardware Panel Sequencing" bitfld.long 0x00 28.--31. "POWER_DISABLE,Number of VSYNCs to wait after power has been disabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "BACKLIGHT_DISABLE,Number of VSYNCs to wait after backlight has been disabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "CLOCK_DISABLE,Number of VSYNCs to wait after clock has been disabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "DATA_DISABLE,Number of VSYNCs to wait after data has been disabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "DATA_ENABLE,Number of VSYNCs to wait after data has been enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "CLOCK_ENABLE,Number of VSYNCs to wait after clock has been enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "BACKLIGHT_ENABLE,Number of VSYNCs to wait after backlight has been enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "POWER_ENABLE,Number of VSYNCsto wait after power has been enabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1400++0x03 line.long 0x00 "HDisplay0,Horizontal Total and Display End Counters" hexmask.long.word 0x00 16.--28. 1. "TOTAL,Total number of horizontal pixels" hexmask.long.word 0x00 0.--12. 1. "DISPLAY_END,Number of visible horizontal pixels" group.long 0x1420++0x03 line.long 0x00 "HSync0,Horizontal Sync Counters" bitfld.long 0x00 31. "POLARITY,Polarity of the horizontal sync pulse" "0: Positive,1: Negative" bitfld.long 0x00 30. "PULSE,Horizontal sync pulse control" "0: Disabled,1: Enabled" newline hexmask.long.word 0x00 16.--28. 1. "END,End of horizontal sync pulse" hexmask.long.word 0x00 0.--12. 1. "START,Start of horizontal sync pulse" group.long 0x1480++0x03 line.long 0x00 "VDisplay0,Vertical Total and Display End Counters" hexmask.long.word 0x00 16.--27. 1. "TOTAL,Total number of vertical lines" hexmask.long.word 0x00 0.--11. 1. "DISPLAY_END,Number of visible vertical lines" group.long 0x14A0++0x03 line.long 0x00 "VSync0,Vertical Sync Counters" bitfld.long 0x00 31. "POLARITY,Polarity of the vertical sync pulse" "0: Positive,1: Active-low" bitfld.long 0x00 30. "PULSE,Vertical sync pulse control" "0: Disabled,1: Enabled" newline hexmask.long.word 0x00 16.--27. 1. "END,End of the vertical sync pulse" hexmask.long.word 0x00 0.--11. 1. "START,Start of the vertical sync pulse" rgroup.long 0x14C0++0x03 line.long 0x00 "DisplayCurrentLocation0,Current x y Location of Display Controller" hexmask.long.word 0x00 16.--31. 1. "Y,Current Y location" hexmask.long.word 0x00 0.--15. 1. "X,Current X location" group.long 0x14E0++0x03 line.long 0x00 "GammaIndex0,Index into Gamma Table" hexmask.long.byte 0x00 0.--7. 1. "INDEX,Index into Gamma Table" group.long 0x1500++0x03 line.long 0x00 "GammaData0,Translation Values for the Gamma Table" hexmask.long.byte 0x00 16.--23. 1. "RED,Red translation value" hexmask.long.byte 0x00 8.--15. 1. "GREEN,Green translation value" newline hexmask.long.byte 0x00 0.--7. 1. "BLUE,Blue translation value" group.long 0x1520++0x03 line.long 0x00 "CursorConfig,Configuration for the Cursor" rbitfld.long 0x00 31. "FLIP_IN_PROGRESS,When the cursor address gets written to this bit gets set to one" "0,1" bitfld.long 0x00 16.--20. "HOT_SPOT_X,Horizontal offset to cursor hotspot" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "HOT_SPOT_Y,Vertical offset to cursor hotspot" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. "DISPLAY,Display Controller owning the cursor" "0: DISPLAY0,1: DISPLAY1" newline bitfld.long 0x00 0.--1. "FORMAT,Format of the cursor" "0: DISABLED,1: ENABLE,2: A8R8G8B8,?..." group.long 0x1530++0x03 line.long 0x00 "CursorAddress,Address of the Cursor Shape" bitfld.long 0x00 31. "TYPE,System Type" "0: DISABLE,1: Virtual system" hexmask.long 0x00 0.--30. 1. "ADDRESS,ADDRESS" group.long 0x1540++0x03 line.long 0x00 "CursorLocation,Location of the cursor on the owning display" hexmask.long.word 0x00 16.--27. 1. "Y,Y location of cursor's hotspot" hexmask.long.word 0x00 0.--12. 1. "X,X location of cursor's hotspot" group.long 0x1550++0x03 line.long 0x00 "CursorBackground,Background Color for Masked Cursors" hexmask.long.byte 0x00 16.--23. 1. "RED,Red value" hexmask.long.byte 0x00 8.--15. 1. "GREEN,Green value" newline hexmask.long.byte 0x00 0.--7. 1. "BLUE,Blue value" group.long 0x1560++0x03 line.long 0x00 "CursorForeground,Foreground Color for Masked Cursors" hexmask.long.byte 0x00 16.--23. 1. "RED,Red value" hexmask.long.byte 0x00 8.--15. 1. "GREEN,Green value" newline hexmask.long.byte 0x00 0.--7. 1. "BLUE,Blue value" group.long 0x1600++0x03 line.long 0x00 "DisplayIntr,Display Interrupt" bitfld.long 0x00 0. "DISP0,Display0 Interrupt" "0,1" group.long 0x1610++0x03 line.long 0x00 "DisplayIntrEnable,Interrupt Enable for Display_0 (and Display_1 if present)" bitfld.long 0x00 0. "DISP0,Display0 Interrupt Enable" "0,1" group.long 0x1620++0x03 line.long 0x00 "DbiConfig0,DBI Configuration 0" bitfld.long 0x00 12.--13. "DBI_TYPEC_OPT,Options for DBI Type C Interface Read/Write Sequence" "0: Option 1,1: Option 2,2: Option 3,?..." bitfld.long 0x00 8.--11. "DBI_AC_TIME_UNIT,Time Unit for AC Characteristics" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 7. "DBIX_POLARITY,D/CX Pin polarity" "0: DISABLE,1: Reverse" bitfld.long 0x00 6. "BUS_OUTPUT_SEL,Output Bus Select" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 2.--5. "DBI_DATA_FORMAT,DBI Interface Data Format" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" wgroup.long 0x1640++0x03 line.long 0x00 "DbiIfReset0,Reset DBI Interface to Idle State" bitfld.long 0x00 0. "DBI_IF_LEVEL_RESET,Reset DBI interface to idle state" "0,1" group.long 0x1660++0x03 line.long 0x00 "DbiWrChar10,DBI Write Characteristics 1" bitfld.long 0x00 12.--15. "DBI_WR_CS_ASSERT,Cycle number=Setting*(DbiAcTimeUnit+1)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "DBI_WR_EOR_WR_ASSERT,Cycle number=Setting*(DbiAcTimeUnit+1)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 0.--7. 1. "DBI_WR_PERIOD,Single Write Period Duration" group.long 0x1680++0x03 line.long 0x00 "DbiWrChar20,DBI Write Characteristics 2" hexmask.long.byte 0x00 8.--15. 1. "DBI_WR_CS_DE_ASRT,Cycle number=Setting*(DbiAcTimeUnit+1)" hexmask.long.byte 0x00 0.--7. 1. "DBI_WR_EOR_WR_DE_ASRT,Cycle number=Setting*(DbiAcTimeUnit+1)" wgroup.long 0x16A0++0x03 line.long 0x00 "DbiCmd0,DBI Command In/Out Port" bitfld.long 0x00 30.--31. "DBI_COMMANDFLAG,DBI Command Flag" "0: ADDRESS,1: WRITE_MEM_START,2: PARAMETER_OR_DATA,3: val3" hexmask.long.word 0x00 0.--15. 1. "DBI_COMMAND_WORD,DBI Command Word" group.long 0x16C0++0x03 line.long 0x00 "DpiConfig0,DPI Configuration 0" bitfld.long 0x00 0.--2. "DPI_DATA_FORMAT,DPI Interface Data Format" "0: D16CFG1,1: D16CFG2,2: D16CFG3,3: D18CFG1,4: D18CFG2,5: val5,6: val6,7: val6" rgroup.long 0x16F0++0x03 line.long 0x00 "DcChipRev,Revision for the LCDIF Peripheral in BCD" hexmask.long 0x00 0.--31. 1. "REV,Revision" rgroup.long 0x1700++0x03 line.long 0x00 "DcChipDate,Shows the release date for the IP in YYYYMMDD (year month)" hexmask.long 0x00 0.--31. 1. "DATE,Date" rgroup.long 0x1720++0x03 line.long 0x00 "DcChipPatchRev,Patch Revision" hexmask.long 0x00 0.--31. 1. "PATCH_REV,Patch Revision" group.long 0x1740++0x03 line.long 0x00 "DcTileInCfg0,Tile Input Configuration" bitfld.long 0x00 5. "CFG_MODE_EN,Configuration Mode Enable" "0: Disabled,1: Enabled" bitfld.long 0x00 4. "YUV2_RGB_EN,YUV2RGB Module Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x00 2.--3. "YUV_STANDARD,YUV Standard Select" "0: DISABLE,1: ENABLE,?..." bitfld.long 0x00 0.--1. "TILE_FORMAT,Tile Format" "0,1,2,3" group.long 0x1760++0x03 line.long 0x00 "DcTileUvFrameBufferAdr0,UV Frame Buffer Address when Tile Input" hexmask.long 0x00 0.--31. 1. "ADDRESS,UV Frame Buffer Address when Tile Input" group.long 0x1780++0x03 line.long 0x00 "DcTileUvFrameBufferStr0,UV Frame Buffer Stride when Tile Input" hexmask.long.word 0x00 0.--15. 1. "STRIDE,UV Frame Buffer Stride when Tile Input" rgroup.long 0x17B0++0x03 line.long 0x00 "DcProductId,Product ID" hexmask.long 0x00 0.--31. 1. "PRODUCT_ID,Product ID" group.long 0x1800++0x03 line.long 0x00 "DCStatus0,DC Status 0" bitfld.long 0x00 0. "DBI_TYPEC_FIFO_FULL,DBI Type C afifo full" "0,1" group.long 0x1820++0x03 line.long 0x00 "DebugCounterSelect0,Debug Counter Select" hexmask.long.byte 0x00 0.--7. 1. "SELECT,Select" group.long 0x1840++0x03 line.long 0x00 "DebugCounterValue0,Debug Counter Value" hexmask.long 0x00 0.--31. 1. "VALUE,Selected Debug Counter Value" tree.end tree "DSI_HOST" base ad:0x2DB00000 group.long 0x00++0x03 line.long 0x00 "CFG_NUM_LANES,no description available" bitfld.long 0x00 0.--1. "NUM_LANES,Sets the number of active lanes that are to be used for transmitting data" "0,1,2,3" group.long 0x04++0x03 line.long 0x00 "CFG_NONCONTINUOUS_CLK,no description available" bitfld.long 0x00 0. "CLK_MODE,Sets the Host Controller into non-continuous MIPI clock mode" "0,1" group.long 0x08++0x03 line.long 0x00 "CFG_T_PRE,no description available" hexmask.long.byte 0x00 0.--6. 1. "NUM_PERIODS,Sets the number of byte clock periods ('clk_byte' input) that the controller will wait after enabling the clock lane for HS operation before enabling the data lanes for HS operation" group.long 0x0C++0x03 line.long 0x00 "CFG_T_POST,no description available" hexmask.long.byte 0x00 0.--6. 1. "NUM_PERIODS,Sets the number of byte clock periods ('clk_byte' input) to wait before putting the clock lane into LP mode after the data lanes have been detected to be in Stop State" group.long 0x10++0x03 line.long 0x00 "CFG_TX_GAP,no description available" hexmask.long.byte 0x00 0.--6. 1. "NUM_PERIODS,Sets the number of byte clock periods ('clk_byte' input) that the controller will wait after the clock lane has been put into LP mode before enabling the clock lane for HS mode again" group.long 0x14++0x03 line.long 0x00 "CFG_AUTOINSERT_EOTP,no description available" bitfld.long 0x00 0. "AUTOINSERT,Enables the Host Controller to automatically insert an EoTp short packet when switching from HS to LP mode" "0,1" group.long 0x18++0x03 line.long 0x00 "CFG_EXTRA_CMDS_AFTER_EOTP,no description available" hexmask.long.byte 0x00 0.--7. 1. "EXTRA_EOTP,Configures the DSI Host Controller to send extra End Of Transmission Packets after the end of a packet" group.long 0x1C++0x03 line.long 0x00 "CFG_HTX_TO_COUNT,no description available" hexmask.long.tbyte 0x00 0.--23. 1. "COUNT,Sets the value of the DSI Host High Speed TX timeout count in clk_byte clock periods that once reached will initiate a timeout error and follow the recovery procedure documented in the DSI specification" group.long 0x20++0x03 line.long 0x00 "CFG_LRX_H_TO_COUNT,no description available" hexmask.long.tbyte 0x00 0.--23. 1. "COUNT,Sets the value of the DSI Host low power RX timeout count in clk_byte clock periods that once reached will initiate a timeout error and follow the recovery procedure documented in the DSI specification" group.long 0x24++0x03 line.long 0x00 "CFG_BTA_H_TO_COUNT,no description available" hexmask.long.tbyte 0x00 0.--23. 1. "COUNT,Sets the value of the DSI Host Bus Turn Around (BTA) timeout in clk_byte clock periods that once reached will initiate a timeout error" group.long 0x28++0x03 line.long 0x00 "CFG_TWAKEUP,no description available" hexmask.long.tbyte 0x00 0.--18. 1. "NUM_PERIODS,DPHY Twakeup timing parameter" rgroup.long 0x2C++0x03 line.long 0x00 "CFG_STATUS_OUT,no description available" hexmask.long 0x00 0.--31. 1. "STATUS,Status Register" rgroup.long 0x30++0x03 line.long 0x00 "RX_ERROR_STATUS,no description available" hexmask.long.word 0x00 0.--10. 1. "STATUS,Status Register for Host receive error detection ECC errors CRC errors and for timeout indicators" tree.end tree "DSI_HOST_APB_PKT_IF" base ad:0x2DB00280 group.long 0x00++0x03 line.long 0x00 "TX_PAYLOAD,no description available" hexmask.long 0x00 0.--31. 1. "PAYLOAD,Tx Payload data write register" group.long 0x04++0x03 line.long 0x00 "PKT_CONTROL,no description available" hexmask.long 0x00 0.--26. 1. "CTRL,Tx packet control register" group.long 0x08++0x03 line.long 0x00 "SEND_PACKET,no description available" bitfld.long 0x00 0. "TX_SEND,Tx send packet writing to this register causes the packet described in dsi_host_pkt_control to be sent" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "PKT_STATUS,no description available" hexmask.long.word 0x00 0.--8. 1. "STATUS,Status of APB to packet interface" rgroup.long 0x10++0x03 line.long 0x00 "PKT_FIFO_WR_LEVEL,no description available" hexmask.long.word 0x00 0.--15. 1. "WR,Write level of APB to pkt interface fifo" rgroup.long 0x14++0x03 line.long 0x00 "PKT_FIFO_RD_LEVEL,no description available" hexmask.long.word 0x00 0.--15. 1. "RD,Read level of APB to pkt interface fifo" rgroup.long 0x18++0x03 line.long 0x00 "PKT_RX_PAYLOAD,no description available" hexmask.long 0x00 0.--31. 1. "PAYLOAD,APB to pkt interface rx payload" rgroup.long 0x1C++0x03 line.long 0x00 "PKT_RX_PKT_HEADER,no description available" hexmask.long.tbyte 0x00 0.--23. 1. "HEADER,APB to pkt interface rx packet header [15:0] word count [21:16] data type [23:22] Virtual Channel" rgroup.long 0x20++0x03 line.long 0x00 "IRQ_STATUS,no description available" abitfld.long 0x00 0.--31. "STATUS,Status of APB to packet interface [0] - state machine not idle [1] - Tx packet done [2] - dphy direction" "0x00000000=0: tx had control,0x00000001=1: rx has control [3] - tx fifo.." rgroup.long 0x24++0x03 line.long 0x00 "IRQ_STATUS2,no description available" bitfld.long 0x00 0.--2. "STATUS2,Status of APB to packet interface part 2 read part 2 first then dsi_host_irq_status" "0,1,2,3,4,5,6,7" group.long 0x28++0x03 line.long 0x00 "IRQ_MASK,no description available" hexmask.long 0x00 0.--31. 1. "MASK,IRQ Mask" group.long 0x2C++0x03 line.long 0x00 "IRQ_MASK2,no description available" bitfld.long 0x00 0.--2. "MASK2,IRQ Mask 2" "0,1,2,3,4,5,6,7" tree.end tree "DSI_HOST_DBI_INTFC" base ad:0x2DB00100 group.long 0x00++0x03 line.long 0x00 "PIXEL_PAYLOAD_SIZE,no description available" hexmask.long.word 0x00 0.--15. 1. "PAYLOAD_SIZE,Maximum number of pixels that should be sent as one DSI packet" group.long 0x04++0x03 line.long 0x00 "PIXEL_FIFO_SEND_LEVEL,no description available" hexmask.long.word 0x00 0.--15. 1. "FIFO_SEND_LEVEL,In order to optimize DSI utility the DBI bridge buffers a cerntain number of DBI pixels before initiating a DSI packet" tree.end tree "DSI_HOST_DPI_INTFC" base ad:0x2DB00200 group.long 0x00++0x03 line.long 0x00 "PIXEL_PAYLOAD_SIZE,no description available" hexmask.long.word 0x00 0.--15. 1. "PAYLOAD_SIZE,Maximum number of pixels that should be sent as one DSI packet" group.long 0x04++0x03 line.long 0x00 "PIXEL_FIFO_SEND_LEVEL,no description available" hexmask.long.word 0x00 0.--15. 1. "FIFO_SEND_LEVEL,In order to optimize DSI utility the DPI bridge buffers a cerntain number of DPI pixels before initiating a DSI packet" group.long 0x08++0x03 line.long 0x00 "INTERFACE_COLOR_CODING,no description available" bitfld.long 0x00 0.--2. "RGB_CONFIG,Sets the distribution of RGB bits within the 24-bit d bus as specified by the DPI specification" "0: 16-bit Configuration 1,1: 16-bit Configuration 2,2: 16-bit Configuration 3,3: 18-bit Configuration 1,4: 18-bit Configuration 2,5: 24-bit,?..." group.long 0x0C++0x03 line.long 0x00 "PIXEL_FORMAT,no description available" bitfld.long 0x00 0.--1. "PIXEL_FORMAT,Sets the DSI packet type of the pixels" "0: PIXEL0,1: PIXEL1,2: 18 bit loosely packed,3: PIXEL3" group.long 0x10++0x03 line.long 0x00 "VSYNC_POLARITY,no description available" bitfld.long 0x00 0. "VSYNC_POLARITY,Sets polarity of dpi_vsync_input" "0: active low,1: active high" group.long 0x14++0x03 line.long 0x00 "HSYNC_POLARITY,no description available" bitfld.long 0x00 0. "HSYNC_POLARITY,Sets polarity of dpi_hsync_input" "0: active low,1: active high" group.long 0x18++0x03 line.long 0x00 "VIDEO_MODE,no description available" bitfld.long 0x00 0.--1. "VIDEO_MODE,Select DSI video mode that the host DPI module should generate packets for" "0: Non-Burst mode with Sync Pulses,1: Non-Burst mode with Sync Events,2: Burst mode,?..." group.long 0x1C++0x03 line.long 0x00 "HFP,no description available" hexmask.long.word 0x00 0.--15. 1. "PAYLOAD_SIZE,Sets the DSI packet payload size in bytes of the horizontal front porch blanking packet" group.long 0x20++0x03 line.long 0x00 "HBP,no description available" hexmask.long.word 0x00 0.--15. 1. "PAYLOAD_SIZE,Sets the DSI packet payload size in bytes of the horizontal back porch blanking packet" group.long 0x24++0x03 line.long 0x00 "HSA,no description available" hexmask.long.word 0x00 0.--15. 1. "PAYLOAD_SIZE,Sets the DSI packet payload size in bytes of the horizontal sync width filler blanking packet" group.long 0x28++0x03 line.long 0x00 "ENABLE_MULT_PKTS,no description available" bitfld.long 0x00 0. "ENABLE_MULT_PKTS,Enable Multiple packets per video line" "0: Video Line is sent in a single packet,1: Video Line is sent in two packets" group.long 0x2C++0x03 line.long 0x00 "VBP,no description available" hexmask.long.byte 0x00 0.--7. 1. "NUM_LINES,Sets the number of lines in the vertical back porch" group.long 0x30++0x03 line.long 0x00 "VFP,no description available" hexmask.long.byte 0x00 0.--7. 1. "NUM_LINES,Sets the number of lines in the vertical front porch" group.long 0x34++0x03 line.long 0x00 "BLLP_MODE,no description available" bitfld.long 0x00 0. "LP,Optimize bllp periods to Low Power mode when possible" "0: Blanking packets are sent during BLLP periods,1: LP mode is used for BLLP periods" group.long 0x38++0x03 line.long 0x00 "USE_NULL_PKT_BLLP,no description available" bitfld.long 0x00 0. "NULL,Selects type of blanking packet to be sent during bllp region" "0: Blanking packet used in bllp region,1: Null packet used in bllp region" group.long 0x3C++0x03 line.long 0x00 "VACTIVE,no description available" hexmask.long.word 0x00 0.--13. 1. "NUM_LINES,Sets the number of lines in the vertical active aread" group.long 0x40++0x03 line.long 0x00 "DPI_VC,no description available" bitfld.long 0x00 0.--1. "SET_VC,Sets the Virtual Channel (VC) of packets that will be sent to the receive packet interface" "0,1,2,3" tree.end tree "DSI_HOST_NXP_IP2B_DPHY_INTFC" base ad:0x2DB00300 group.long 0x00++0x03 line.long 0x00 "PD_DPHY,no description available" bitfld.long 0x00 0. "PD_DPHY,Power Down input for PHY" "0,1" group.long 0x04++0x03 line.long 0x00 "M_PRG_HS_PREPARE,no description available" bitfld.long 0x00 0.--1. "M_PRG_HS_PREPARE,This field is used to program T_HS_PREPARE time in the beginning of high speed transmission mode" "0,1,2,3" group.long 0x08++0x03 line.long 0x00 "MC_PRG_HS_PREPARE,no description available" bitfld.long 0x00 0. "MC_PRG_HS_PREPARE,This bit is used to program T_CLK_PREPARE time in the beginning of high-speed transmission mode" "0,1" group.long 0x0C++0x03 line.long 0x00 "M_PRG_HS_ZERO,no description available" bitfld.long 0x00 0.--5. "M_PRG_HS_ZERO,This field is used to program T_HS_ZERO time in the beginning of high-speed transmission mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10++0x03 line.long 0x00 "MC_PRG_HS_ZERO,no description available" hexmask.long.byte 0x00 0.--6. 1. "MC_PRG_HS_ZERO,This field is used to program T_CLK_ZERO time in the beginning of high-speed transmission mode" group.long 0x14++0x03 line.long 0x00 "M_PRG_HS_TRAIL,no description available" bitfld.long 0x00 0.--4. "M_PRG_HS_TRAIL,This field is used to program T_HS_TRAIL time in the end of high-speed transmission mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x18++0x03 line.long 0x00 "MC_PRG_HS_TRAIL,no description available" bitfld.long 0x00 0.--4. "MC_PRG_HS_TRAIL,This field is used to program T_CLK_ZERO time in the beginning of high-speed transmission mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x1C++0x03 line.long 0x00 "MC_PRG_RXHS_SETTLE,no description available" bitfld.long 0x00 0.--5. "MC_PRG_RXHS_SETTLE,This field is used to program T_CLK_SETTLE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x20++0x03 line.long 0x00 "M_PRG_RXHS_SETTLE,no description available" bitfld.long 0x00 0.--5. "M_PRG_RXHS_SETTLE,This field is used to program T_HS_SETTLE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x24++0x03 line.long 0x00 "PD_PLL,no description available" bitfld.long 0x00 0. "PD_PLL,Power-down signal" "0,1" group.long 0x28++0x03 line.long 0x00 "TST,no description available" bitfld.long 0x00 0.--5. "TST,Test Pins" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2C++0x03 line.long 0x00 "CN,no description available" bitfld.long 0x00 0.--4. "CN,Control N divider" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x30++0x03 line.long 0x00 "CM,no description available" hexmask.long.byte 0x00 0.--7. 1. "CM,Control M divider" group.long 0x34++0x03 line.long 0x00 "CO,no description available" bitfld.long 0x00 0.--1. "CO,Control O divider" "0,1,2,3" rgroup.long 0x38++0x03 line.long 0x00 "LOCK,no description available" bitfld.long 0x00 0. "LOCK,Lock Detect output" "0,1" group.long 0x3C++0x03 line.long 0x00 "LOCK_BYP,no description available" bitfld.long 0x00 0. "LOCK_BYP,When clock lane exits from ULPS this input determines if the PLL LOCK signal will be used to gate the TxByteClkHS" "0: PLL LOCK signal will gate TxByteClkHS clock..,1: PLL LOCK signal will not gate TxByteClkHS.." group.long 0x40++0x03 line.long 0x00 "AUTO_PD_EN,no description available" bitfld.long 0x00 0. "AUTO_PD_EN,Powers down inactive lanes reported by CFG_NUM_LANES input bus" "0: Inactive lanes are powered up and driving LP11,1: Inactive lanes are powered down [Default]" group.long 0x44++0x03 line.long 0x00 "RXLPRP,no description available" bitfld.long 0x00 0.--1. "RXLPRP,This field adjusts the threshold voltage and hysteresis of LP-RX" "0,1,2,3" group.long 0x48++0x03 line.long 0x00 "RXCDRP,no description available" bitfld.long 0x00 0.--1. "RXCDRP,This field adjusts the threshold voltage of LP-CD" "0,1,2,3" tree.end tree "EDMA0_MP (DMA MP)" base ad:0x28001000 group.long 0x00++0x03 line.long 0x00 "MP_CSR,Management Page Control" rbitfld.long 0x00 31. "ACTIVE,DMA Active Status" "0: eDMA is idle,1: eDMA is executing a channel" rbitfld.long 0x00 24.--28. "ACTIVE_ID,Active Channel ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 9. "CX,Cancel Transfer" "0: NORMAL_OPERATION,1: Cancel the remaining data transfer" bitfld.long 0x00 8. "ECX,Cancel Transfer With Error" "0: NORMAL_OPERATION,1: Cancel the remaining data transfer" newline bitfld.long 0x00 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication disabled for all channels,1: Master ID replication available and.." bitfld.long 0x00 6. "GCLC,Global Channel Linking Control" "0: Channel linking disabled for all channels,1: Channel linking available and controlled by.." newline bitfld.long 0x00 5. "HALT,Halt DMA Operations" "0: NORMAL_OPERATION,1: Stall the start of any new channels" bitfld.long 0x00 4. "HAE,Halt After Error" "0: NORMAL_OPERATION,1: Any error causes the HALT field to be set to 1" newline bitfld.long 0x00 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round-robin channel arbitration disabled,1: Round-robin channel arbitration enabled" bitfld.long 0x00 1. "EDBG,Enable Debug" "0: Debug mode disabled,1: Debug mode is enabled" rgroup.long 0x04++0x03 line.long 0x00 "MP_ES,Management Page Error Status" bitfld.long 0x00 31. "VLD,Valid" "0: No ERR fields are set to 1,1: At least one ERR field is set to 1 indicating.." bitfld.long 0x00 24.--28. "ERRCHN,Error Channel Number or Canceled Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "ECX,Transfer Canceled" "0: NO_CANCELED_TRANSFERS,1: Last recorded entry was a canceled transfer.." bitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to.." newline bitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was a bus error on a source" newline bitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was a bus error on a.." rgroup.long 0x08++0x03 line.long 0x00 "MP_INT,Management Page Interrupt Request Status" hexmask.long 0x00 0.--31. 1. "INT,Interrupt Request Status" rgroup.long 0x0C++0x03 line.long 0x00 "MP_HRS,Management Page Hardware Request Status" hexmask.long 0x00 0.--31. 1. "HRS,Hardware Request Status" repeat 32. (increment 0 1) (increment 0 0x04) group.long ($2+0x100)++0x03 line.long 0x00 "CH_GRPRI[$1],Channel Arbitration Group $1" bitfld.long 0x00 0.--4. "GRPRI,Arbitration Group For Channel n" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end tree.end tree "EDMA0_TCD (DMA TCD)" base ad:0x28002000 group.long 0x00++0x03 line.long 0x00 "CH0_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x04++0x03 line.long 0x00 "CH0_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x08++0x03 line.long 0x00 "CH0_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x0C++0x03 line.long 0x00 "CH0_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10++0x03 line.long 0x00 "CH0_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x14++0x03 line.long 0x00 "CH0_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x20++0x03 line.long 0x00 "TCD0_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x24++0x01 line.word 0x00 "TCD0_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x26++0x01 line.word 0x00 "TCD0_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x28++0x03 line.long 0x00 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x28++0x03 line.long 0x00 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x2C++0x03 line.long 0x00 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x30++0x03 line.long 0x00 "TCD0_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x34++0x01 line.word 0x00 "TCD0_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x36++0x01 line.word 0x00 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x36++0x01 line.word 0x00 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x38++0x03 line.long 0x00 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3C++0x01 line.word 0x00 "TCD0_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x3E++0x01 line.word 0x00 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3E++0x01 line.word 0x00 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1000++0x03 line.long 0x00 "CH1_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1004++0x03 line.long 0x00 "CH1_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1008++0x03 line.long 0x00 "CH1_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x100C++0x03 line.long 0x00 "CH1_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1010++0x03 line.long 0x00 "CH1_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1014++0x03 line.long 0x00 "CH1_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1020++0x03 line.long 0x00 "TCD1_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1024++0x01 line.word 0x00 "TCD1_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1026++0x01 line.word 0x00 "TCD1_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1028++0x03 line.long 0x00 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1028++0x03 line.long 0x00 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x102C++0x03 line.long 0x00 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1030++0x03 line.long 0x00 "TCD1_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1034++0x01 line.word 0x00 "TCD1_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1036++0x01 line.word 0x00 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1036++0x01 line.word 0x00 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1038++0x03 line.long 0x00 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x103C++0x01 line.word 0x00 "TCD1_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x103E++0x01 line.word 0x00 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x103E++0x01 line.word 0x00 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x2000++0x03 line.long 0x00 "CH2_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x2004++0x03 line.long 0x00 "CH2_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x2008++0x03 line.long 0x00 "CH2_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x200C++0x03 line.long 0x00 "CH2_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2010++0x03 line.long 0x00 "CH2_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x2014++0x03 line.long 0x00 "CH2_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x2020++0x03 line.long 0x00 "TCD2_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x2024++0x01 line.word 0x00 "TCD2_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x2026++0x01 line.word 0x00 "TCD2_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x2028++0x03 line.long 0x00 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x2028++0x03 line.long 0x00 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x202C++0x03 line.long 0x00 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x2030++0x03 line.long 0x00 "TCD2_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x2034++0x01 line.word 0x00 "TCD2_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x2036++0x01 line.word 0x00 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x2036++0x01 line.word 0x00 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x2038++0x03 line.long 0x00 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x203C++0x01 line.word 0x00 "TCD2_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x203E++0x01 line.word 0x00 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x203E++0x01 line.word 0x00 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x3000++0x03 line.long 0x00 "CH3_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x3004++0x03 line.long 0x00 "CH3_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x3008++0x03 line.long 0x00 "CH3_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x300C++0x03 line.long 0x00 "CH3_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x3010++0x03 line.long 0x00 "CH3_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x3014++0x03 line.long 0x00 "CH3_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x3020++0x03 line.long 0x00 "TCD3_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x3024++0x01 line.word 0x00 "TCD3_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x3026++0x01 line.word 0x00 "TCD3_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x3028++0x03 line.long 0x00 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x3028++0x03 line.long 0x00 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x302C++0x03 line.long 0x00 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x3030++0x03 line.long 0x00 "TCD3_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x3034++0x01 line.word 0x00 "TCD3_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x3036++0x01 line.word 0x00 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x3036++0x01 line.word 0x00 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x3038++0x03 line.long 0x00 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x303C++0x01 line.word 0x00 "TCD3_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x303E++0x01 line.word 0x00 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x303E++0x01 line.word 0x00 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x4000++0x03 line.long 0x00 "CH4_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x4004++0x03 line.long 0x00 "CH4_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x4008++0x03 line.long 0x00 "CH4_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x400C++0x03 line.long 0x00 "CH4_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x4010++0x03 line.long 0x00 "CH4_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x4014++0x03 line.long 0x00 "CH4_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x4020++0x03 line.long 0x00 "TCD4_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x4024++0x01 line.word 0x00 "TCD4_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x4026++0x01 line.word 0x00 "TCD4_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x4028++0x03 line.long 0x00 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x4028++0x03 line.long 0x00 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x402C++0x03 line.long 0x00 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x4030++0x03 line.long 0x00 "TCD4_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x4034++0x01 line.word 0x00 "TCD4_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x4036++0x01 line.word 0x00 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x4036++0x01 line.word 0x00 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x4038++0x03 line.long 0x00 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x403C++0x01 line.word 0x00 "TCD4_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x403E++0x01 line.word 0x00 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x403E++0x01 line.word 0x00 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x5000++0x03 line.long 0x00 "CH5_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x5004++0x03 line.long 0x00 "CH5_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x5008++0x03 line.long 0x00 "CH5_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x500C++0x03 line.long 0x00 "CH5_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x5010++0x03 line.long 0x00 "CH5_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x5014++0x03 line.long 0x00 "CH5_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x5020++0x03 line.long 0x00 "TCD5_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x5024++0x01 line.word 0x00 "TCD5_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x5026++0x01 line.word 0x00 "TCD5_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x5028++0x03 line.long 0x00 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x5028++0x03 line.long 0x00 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x502C++0x03 line.long 0x00 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x5030++0x03 line.long 0x00 "TCD5_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x5034++0x01 line.word 0x00 "TCD5_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x5036++0x01 line.word 0x00 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x5036++0x01 line.word 0x00 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x5038++0x03 line.long 0x00 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x503C++0x01 line.word 0x00 "TCD5_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x503E++0x01 line.word 0x00 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x503E++0x01 line.word 0x00 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x6000++0x03 line.long 0x00 "CH6_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x6004++0x03 line.long 0x00 "CH6_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x6008++0x03 line.long 0x00 "CH6_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x600C++0x03 line.long 0x00 "CH6_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x6010++0x03 line.long 0x00 "CH6_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x6014++0x03 line.long 0x00 "CH6_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x6020++0x03 line.long 0x00 "TCD6_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x6024++0x01 line.word 0x00 "TCD6_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x6026++0x01 line.word 0x00 "TCD6_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x6028++0x03 line.long 0x00 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x6028++0x03 line.long 0x00 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x602C++0x03 line.long 0x00 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x6030++0x03 line.long 0x00 "TCD6_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x6034++0x01 line.word 0x00 "TCD6_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x6036++0x01 line.word 0x00 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x6036++0x01 line.word 0x00 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x6038++0x03 line.long 0x00 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x603C++0x01 line.word 0x00 "TCD6_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x603E++0x01 line.word 0x00 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x603E++0x01 line.word 0x00 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x7000++0x03 line.long 0x00 "CH7_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x7004++0x03 line.long 0x00 "CH7_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x7008++0x03 line.long 0x00 "CH7_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x700C++0x03 line.long 0x00 "CH7_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x7010++0x03 line.long 0x00 "CH7_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x7014++0x03 line.long 0x00 "CH7_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x7020++0x03 line.long 0x00 "TCD7_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x7024++0x01 line.word 0x00 "TCD7_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x7026++0x01 line.word 0x00 "TCD7_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x7028++0x03 line.long 0x00 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x7028++0x03 line.long 0x00 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x702C++0x03 line.long 0x00 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x7030++0x03 line.long 0x00 "TCD7_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x7034++0x01 line.word 0x00 "TCD7_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x7036++0x01 line.word 0x00 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x7036++0x01 line.word 0x00 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x7038++0x03 line.long 0x00 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x703C++0x01 line.word 0x00 "TCD7_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x703E++0x01 line.word 0x00 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x703E++0x01 line.word 0x00 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x8000++0x03 line.long 0x00 "CH8_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x8004++0x03 line.long 0x00 "CH8_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x8008++0x03 line.long 0x00 "CH8_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x800C++0x03 line.long 0x00 "CH8_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x8010++0x03 line.long 0x00 "CH8_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x8014++0x03 line.long 0x00 "CH8_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x8020++0x03 line.long 0x00 "TCD8_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x8024++0x01 line.word 0x00 "TCD8_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x8026++0x01 line.word 0x00 "TCD8_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x8028++0x03 line.long 0x00 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x8028++0x03 line.long 0x00 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x802C++0x03 line.long 0x00 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x8030++0x03 line.long 0x00 "TCD8_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x8034++0x01 line.word 0x00 "TCD8_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x8036++0x01 line.word 0x00 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x8036++0x01 line.word 0x00 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x8038++0x03 line.long 0x00 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x803C++0x01 line.word 0x00 "TCD8_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x803E++0x01 line.word 0x00 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x803E++0x01 line.word 0x00 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x9000++0x03 line.long 0x00 "CH9_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x9004++0x03 line.long 0x00 "CH9_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x9008++0x03 line.long 0x00 "CH9_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x900C++0x03 line.long 0x00 "CH9_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x9010++0x03 line.long 0x00 "CH9_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x9014++0x03 line.long 0x00 "CH9_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x9020++0x03 line.long 0x00 "TCD9_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x9024++0x01 line.word 0x00 "TCD9_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x9026++0x01 line.word 0x00 "TCD9_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x9028++0x03 line.long 0x00 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x9028++0x03 line.long 0x00 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x902C++0x03 line.long 0x00 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x9030++0x03 line.long 0x00 "TCD9_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x9034++0x01 line.word 0x00 "TCD9_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x9036++0x01 line.word 0x00 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x9036++0x01 line.word 0x00 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x9038++0x03 line.long 0x00 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x903C++0x01 line.word 0x00 "TCD9_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x903E++0x01 line.word 0x00 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x903E++0x01 line.word 0x00 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xA000++0x03 line.long 0x00 "CH10_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xA004++0x03 line.long 0x00 "CH10_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xA008++0x03 line.long 0x00 "CH10_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xA00C++0x03 line.long 0x00 "CH10_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA010++0x03 line.long 0x00 "CH10_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA014++0x03 line.long 0x00 "CH10_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xA020++0x03 line.long 0x00 "TCD10_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xA024++0x01 line.word 0x00 "TCD10_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xA026++0x01 line.word 0x00 "TCD10_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xA028++0x03 line.long 0x00 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA028++0x03 line.long 0x00 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA02C++0x03 line.long 0x00 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xA030++0x03 line.long 0x00 "TCD10_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xA034++0x01 line.word 0x00 "TCD10_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xA036++0x01 line.word 0x00 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA036++0x01 line.word 0x00 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xA038++0x03 line.long 0x00 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xA03C++0x01 line.word 0x00 "TCD10_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xA03E++0x01 line.word 0x00 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA03E++0x01 line.word 0x00 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xB000++0x03 line.long 0x00 "CH11_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xB004++0x03 line.long 0x00 "CH11_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xB008++0x03 line.long 0x00 "CH11_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xB00C++0x03 line.long 0x00 "CH11_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB010++0x03 line.long 0x00 "CH11_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB014++0x03 line.long 0x00 "CH11_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xB020++0x03 line.long 0x00 "TCD11_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xB024++0x01 line.word 0x00 "TCD11_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xB026++0x01 line.word 0x00 "TCD11_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xB028++0x03 line.long 0x00 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB028++0x03 line.long 0x00 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB02C++0x03 line.long 0x00 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xB030++0x03 line.long 0x00 "TCD11_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xB034++0x01 line.word 0x00 "TCD11_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xB036++0x01 line.word 0x00 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB036++0x01 line.word 0x00 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xB038++0x03 line.long 0x00 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xB03C++0x01 line.word 0x00 "TCD11_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xB03E++0x01 line.word 0x00 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB03E++0x01 line.word 0x00 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xC000++0x03 line.long 0x00 "CH12_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xC004++0x03 line.long 0x00 "CH12_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xC008++0x03 line.long 0x00 "CH12_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xC00C++0x03 line.long 0x00 "CH12_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC010++0x03 line.long 0x00 "CH12_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC014++0x03 line.long 0x00 "CH12_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xC020++0x03 line.long 0x00 "TCD12_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xC024++0x01 line.word 0x00 "TCD12_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xC026++0x01 line.word 0x00 "TCD12_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xC028++0x03 line.long 0x00 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC028++0x03 line.long 0x00 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC02C++0x03 line.long 0x00 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xC030++0x03 line.long 0x00 "TCD12_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xC034++0x01 line.word 0x00 "TCD12_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xC036++0x01 line.word 0x00 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC036++0x01 line.word 0x00 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xC038++0x03 line.long 0x00 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xC03C++0x01 line.word 0x00 "TCD12_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xC03E++0x01 line.word 0x00 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC03E++0x01 line.word 0x00 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xD000++0x03 line.long 0x00 "CH13_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xD004++0x03 line.long 0x00 "CH13_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xD008++0x03 line.long 0x00 "CH13_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xD00C++0x03 line.long 0x00 "CH13_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD010++0x03 line.long 0x00 "CH13_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD014++0x03 line.long 0x00 "CH13_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xD020++0x03 line.long 0x00 "TCD13_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xD024++0x01 line.word 0x00 "TCD13_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xD026++0x01 line.word 0x00 "TCD13_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xD028++0x03 line.long 0x00 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD028++0x03 line.long 0x00 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD02C++0x03 line.long 0x00 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xD030++0x03 line.long 0x00 "TCD13_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xD034++0x01 line.word 0x00 "TCD13_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xD036++0x01 line.word 0x00 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD036++0x01 line.word 0x00 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xD038++0x03 line.long 0x00 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xD03C++0x01 line.word 0x00 "TCD13_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xD03E++0x01 line.word 0x00 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD03E++0x01 line.word 0x00 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xE000++0x03 line.long 0x00 "CH14_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xE004++0x03 line.long 0x00 "CH14_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xE008++0x03 line.long 0x00 "CH14_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xE00C++0x03 line.long 0x00 "CH14_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xE010++0x03 line.long 0x00 "CH14_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE014++0x03 line.long 0x00 "CH14_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xE020++0x03 line.long 0x00 "TCD14_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xE024++0x01 line.word 0x00 "TCD14_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xE026++0x01 line.word 0x00 "TCD14_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xE028++0x03 line.long 0x00 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE028++0x03 line.long 0x00 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE02C++0x03 line.long 0x00 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xE030++0x03 line.long 0x00 "TCD14_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xE034++0x01 line.word 0x00 "TCD14_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xE036++0x01 line.word 0x00 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE036++0x01 line.word 0x00 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xE038++0x03 line.long 0x00 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xE03C++0x01 line.word 0x00 "TCD14_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xE03E++0x01 line.word 0x00 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE03E++0x01 line.word 0x00 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xF000++0x03 line.long 0x00 "CH15_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xF004++0x03 line.long 0x00 "CH15_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xF008++0x03 line.long 0x00 "CH15_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xF00C++0x03 line.long 0x00 "CH15_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xF010++0x03 line.long 0x00 "CH15_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF014++0x03 line.long 0x00 "CH15_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xF020++0x03 line.long 0x00 "TCD15_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xF024++0x01 line.word 0x00 "TCD15_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xF026++0x01 line.word 0x00 "TCD15_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xF028++0x03 line.long 0x00 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF028++0x03 line.long 0x00 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF02C++0x03 line.long 0x00 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xF030++0x03 line.long 0x00 "TCD15_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xF034++0x01 line.word 0x00 "TCD15_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xF036++0x01 line.word 0x00 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF036++0x01 line.word 0x00 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xF038++0x03 line.long 0x00 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xF03C++0x01 line.word 0x00 "TCD15_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xF03E++0x01 line.word 0x00 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF03E++0x01 line.word 0x00 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x10000++0x03 line.long 0x00 "CH16_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x10004++0x03 line.long 0x00 "CH16_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x10008++0x03 line.long 0x00 "CH16_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1000C++0x03 line.long 0x00 "CH16_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10010++0x03 line.long 0x00 "CH16_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10014++0x03 line.long 0x00 "CH16_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x10020++0x03 line.long 0x00 "TCD16_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x10024++0x01 line.word 0x00 "TCD16_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x10026++0x01 line.word 0x00 "TCD16_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x10028++0x03 line.long 0x00 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x10028++0x03 line.long 0x00 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1002C++0x03 line.long 0x00 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x10030++0x03 line.long 0x00 "TCD16_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x10034++0x01 line.word 0x00 "TCD16_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x10036++0x01 line.word 0x00 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10036++0x01 line.word 0x00 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x10038++0x03 line.long 0x00 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1003C++0x01 line.word 0x00 "TCD16_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1003E++0x01 line.word 0x00 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1003E++0x01 line.word 0x00 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x11000++0x03 line.long 0x00 "CH17_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x11004++0x03 line.long 0x00 "CH17_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x11008++0x03 line.long 0x00 "CH17_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1100C++0x03 line.long 0x00 "CH17_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x11010++0x03 line.long 0x00 "CH17_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x11014++0x03 line.long 0x00 "CH17_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x11020++0x03 line.long 0x00 "TCD17_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x11024++0x01 line.word 0x00 "TCD17_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x11026++0x01 line.word 0x00 "TCD17_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x11028++0x03 line.long 0x00 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x11028++0x03 line.long 0x00 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1102C++0x03 line.long 0x00 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x11030++0x03 line.long 0x00 "TCD17_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x11034++0x01 line.word 0x00 "TCD17_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x11036++0x01 line.word 0x00 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x11036++0x01 line.word 0x00 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x11038++0x03 line.long 0x00 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1103C++0x01 line.word 0x00 "TCD17_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1103E++0x01 line.word 0x00 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1103E++0x01 line.word 0x00 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x12000++0x03 line.long 0x00 "CH18_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x12004++0x03 line.long 0x00 "CH18_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x12008++0x03 line.long 0x00 "CH18_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1200C++0x03 line.long 0x00 "CH18_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x12010++0x03 line.long 0x00 "CH18_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x12014++0x03 line.long 0x00 "CH18_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x12020++0x03 line.long 0x00 "TCD18_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x12024++0x01 line.word 0x00 "TCD18_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x12026++0x01 line.word 0x00 "TCD18_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x12028++0x03 line.long 0x00 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x12028++0x03 line.long 0x00 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1202C++0x03 line.long 0x00 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x12030++0x03 line.long 0x00 "TCD18_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x12034++0x01 line.word 0x00 "TCD18_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x12036++0x01 line.word 0x00 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x12036++0x01 line.word 0x00 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x12038++0x03 line.long 0x00 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1203C++0x01 line.word 0x00 "TCD18_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1203E++0x01 line.word 0x00 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1203E++0x01 line.word 0x00 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x13000++0x03 line.long 0x00 "CH19_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x13004++0x03 line.long 0x00 "CH19_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x13008++0x03 line.long 0x00 "CH19_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1300C++0x03 line.long 0x00 "CH19_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x13010++0x03 line.long 0x00 "CH19_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x13014++0x03 line.long 0x00 "CH19_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x13020++0x03 line.long 0x00 "TCD19_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x13024++0x01 line.word 0x00 "TCD19_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x13026++0x01 line.word 0x00 "TCD19_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x13028++0x03 line.long 0x00 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x13028++0x03 line.long 0x00 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1302C++0x03 line.long 0x00 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x13030++0x03 line.long 0x00 "TCD19_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x13034++0x01 line.word 0x00 "TCD19_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x13036++0x01 line.word 0x00 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x13036++0x01 line.word 0x00 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x13038++0x03 line.long 0x00 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1303C++0x01 line.word 0x00 "TCD19_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1303E++0x01 line.word 0x00 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1303E++0x01 line.word 0x00 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x14000++0x03 line.long 0x00 "CH20_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x14004++0x03 line.long 0x00 "CH20_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x14008++0x03 line.long 0x00 "CH20_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1400C++0x03 line.long 0x00 "CH20_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x14010++0x03 line.long 0x00 "CH20_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x14014++0x03 line.long 0x00 "CH20_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x14020++0x03 line.long 0x00 "TCD20_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x14024++0x01 line.word 0x00 "TCD20_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x14026++0x01 line.word 0x00 "TCD20_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x14028++0x03 line.long 0x00 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x14028++0x03 line.long 0x00 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1402C++0x03 line.long 0x00 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x14030++0x03 line.long 0x00 "TCD20_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x14034++0x01 line.word 0x00 "TCD20_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x14036++0x01 line.word 0x00 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x14036++0x01 line.word 0x00 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x14038++0x03 line.long 0x00 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1403C++0x01 line.word 0x00 "TCD20_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1403E++0x01 line.word 0x00 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1403E++0x01 line.word 0x00 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x15000++0x03 line.long 0x00 "CH21_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x15004++0x03 line.long 0x00 "CH21_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x15008++0x03 line.long 0x00 "CH21_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1500C++0x03 line.long 0x00 "CH21_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x15010++0x03 line.long 0x00 "CH21_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x15014++0x03 line.long 0x00 "CH21_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x15020++0x03 line.long 0x00 "TCD21_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x15024++0x01 line.word 0x00 "TCD21_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x15026++0x01 line.word 0x00 "TCD21_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x15028++0x03 line.long 0x00 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x15028++0x03 line.long 0x00 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1502C++0x03 line.long 0x00 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x15030++0x03 line.long 0x00 "TCD21_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x15034++0x01 line.word 0x00 "TCD21_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x15036++0x01 line.word 0x00 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x15036++0x01 line.word 0x00 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x15038++0x03 line.long 0x00 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1503C++0x01 line.word 0x00 "TCD21_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1503E++0x01 line.word 0x00 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1503E++0x01 line.word 0x00 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x16000++0x03 line.long 0x00 "CH22_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x16004++0x03 line.long 0x00 "CH22_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x16008++0x03 line.long 0x00 "CH22_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1600C++0x03 line.long 0x00 "CH22_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x16010++0x03 line.long 0x00 "CH22_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x16014++0x03 line.long 0x00 "CH22_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x16020++0x03 line.long 0x00 "TCD22_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x16024++0x01 line.word 0x00 "TCD22_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x16026++0x01 line.word 0x00 "TCD22_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x16028++0x03 line.long 0x00 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x16028++0x03 line.long 0x00 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1602C++0x03 line.long 0x00 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x16030++0x03 line.long 0x00 "TCD22_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x16034++0x01 line.word 0x00 "TCD22_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x16036++0x01 line.word 0x00 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x16036++0x01 line.word 0x00 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x16038++0x03 line.long 0x00 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1603C++0x01 line.word 0x00 "TCD22_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1603E++0x01 line.word 0x00 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1603E++0x01 line.word 0x00 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x17000++0x03 line.long 0x00 "CH23_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x17004++0x03 line.long 0x00 "CH23_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x17008++0x03 line.long 0x00 "CH23_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1700C++0x03 line.long 0x00 "CH23_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x17010++0x03 line.long 0x00 "CH23_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x17014++0x03 line.long 0x00 "CH23_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x17020++0x03 line.long 0x00 "TCD23_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x17024++0x01 line.word 0x00 "TCD23_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x17026++0x01 line.word 0x00 "TCD23_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x17028++0x03 line.long 0x00 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x17028++0x03 line.long 0x00 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1702C++0x03 line.long 0x00 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x17030++0x03 line.long 0x00 "TCD23_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x17034++0x01 line.word 0x00 "TCD23_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x17036++0x01 line.word 0x00 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x17036++0x01 line.word 0x00 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x17038++0x03 line.long 0x00 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1703C++0x01 line.word 0x00 "TCD23_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1703E++0x01 line.word 0x00 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1703E++0x01 line.word 0x00 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x18000++0x03 line.long 0x00 "CH24_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x18004++0x03 line.long 0x00 "CH24_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x18008++0x03 line.long 0x00 "CH24_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1800C++0x03 line.long 0x00 "CH24_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x18010++0x03 line.long 0x00 "CH24_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x18014++0x03 line.long 0x00 "CH24_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x18020++0x03 line.long 0x00 "TCD24_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x18024++0x01 line.word 0x00 "TCD24_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x18026++0x01 line.word 0x00 "TCD24_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x18028++0x03 line.long 0x00 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x18028++0x03 line.long 0x00 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1802C++0x03 line.long 0x00 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x18030++0x03 line.long 0x00 "TCD24_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x18034++0x01 line.word 0x00 "TCD24_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x18036++0x01 line.word 0x00 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x18036++0x01 line.word 0x00 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x18038++0x03 line.long 0x00 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1803C++0x01 line.word 0x00 "TCD24_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1803E++0x01 line.word 0x00 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1803E++0x01 line.word 0x00 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x19000++0x03 line.long 0x00 "CH25_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x19004++0x03 line.long 0x00 "CH25_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x19008++0x03 line.long 0x00 "CH25_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1900C++0x03 line.long 0x00 "CH25_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x19010++0x03 line.long 0x00 "CH25_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x19014++0x03 line.long 0x00 "CH25_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x19020++0x03 line.long 0x00 "TCD25_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x19024++0x01 line.word 0x00 "TCD25_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x19026++0x01 line.word 0x00 "TCD25_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x19028++0x03 line.long 0x00 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x19028++0x03 line.long 0x00 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1902C++0x03 line.long 0x00 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x19030++0x03 line.long 0x00 "TCD25_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x19034++0x01 line.word 0x00 "TCD25_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x19036++0x01 line.word 0x00 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x19036++0x01 line.word 0x00 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x19038++0x03 line.long 0x00 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1903C++0x01 line.word 0x00 "TCD25_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1903E++0x01 line.word 0x00 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1903E++0x01 line.word 0x00 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1A000++0x03 line.long 0x00 "CH26_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1A004++0x03 line.long 0x00 "CH26_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1A008++0x03 line.long 0x00 "CH26_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1A00C++0x03 line.long 0x00 "CH26_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1A010++0x03 line.long 0x00 "CH26_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A014++0x03 line.long 0x00 "CH26_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1A020++0x03 line.long 0x00 "TCD26_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1A024++0x01 line.word 0x00 "TCD26_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1A026++0x01 line.word 0x00 "TCD26_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1A028++0x03 line.long 0x00 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A028++0x03 line.long 0x00 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A02C++0x03 line.long 0x00 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1A030++0x03 line.long 0x00 "TCD26_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1A034++0x01 line.word 0x00 "TCD26_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1A036++0x01 line.word 0x00 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A036++0x01 line.word 0x00 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1A038++0x03 line.long 0x00 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1A03C++0x01 line.word 0x00 "TCD26_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1A03E++0x01 line.word 0x00 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A03E++0x01 line.word 0x00 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1B000++0x03 line.long 0x00 "CH27_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1B004++0x03 line.long 0x00 "CH27_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1B008++0x03 line.long 0x00 "CH27_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1B00C++0x03 line.long 0x00 "CH27_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1B010++0x03 line.long 0x00 "CH27_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B014++0x03 line.long 0x00 "CH27_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1B020++0x03 line.long 0x00 "TCD27_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1B024++0x01 line.word 0x00 "TCD27_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1B026++0x01 line.word 0x00 "TCD27_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1B028++0x03 line.long 0x00 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B028++0x03 line.long 0x00 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B02C++0x03 line.long 0x00 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1B030++0x03 line.long 0x00 "TCD27_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1B034++0x01 line.word 0x00 "TCD27_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1B036++0x01 line.word 0x00 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B036++0x01 line.word 0x00 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1B038++0x03 line.long 0x00 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1B03C++0x01 line.word 0x00 "TCD27_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1B03E++0x01 line.word 0x00 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B03E++0x01 line.word 0x00 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1C000++0x03 line.long 0x00 "CH28_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1C004++0x03 line.long 0x00 "CH28_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1C008++0x03 line.long 0x00 "CH28_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1C00C++0x03 line.long 0x00 "CH28_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1C010++0x03 line.long 0x00 "CH28_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C014++0x03 line.long 0x00 "CH28_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1C020++0x03 line.long 0x00 "TCD28_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1C024++0x01 line.word 0x00 "TCD28_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1C026++0x01 line.word 0x00 "TCD28_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1C028++0x03 line.long 0x00 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C028++0x03 line.long 0x00 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C02C++0x03 line.long 0x00 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1C030++0x03 line.long 0x00 "TCD28_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1C034++0x01 line.word 0x00 "TCD28_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1C036++0x01 line.word 0x00 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C036++0x01 line.word 0x00 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1C038++0x03 line.long 0x00 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1C03C++0x01 line.word 0x00 "TCD28_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1C03E++0x01 line.word 0x00 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C03E++0x01 line.word 0x00 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1D000++0x03 line.long 0x00 "CH29_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1D004++0x03 line.long 0x00 "CH29_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1D008++0x03 line.long 0x00 "CH29_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1D00C++0x03 line.long 0x00 "CH29_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D010++0x03 line.long 0x00 "CH29_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D014++0x03 line.long 0x00 "CH29_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1D020++0x03 line.long 0x00 "TCD29_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1D024++0x01 line.word 0x00 "TCD29_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1D026++0x01 line.word 0x00 "TCD29_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1D028++0x03 line.long 0x00 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D028++0x03 line.long 0x00 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D02C++0x03 line.long 0x00 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1D030++0x03 line.long 0x00 "TCD29_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1D034++0x01 line.word 0x00 "TCD29_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1D036++0x01 line.word 0x00 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D036++0x01 line.word 0x00 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1D038++0x03 line.long 0x00 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1D03C++0x01 line.word 0x00 "TCD29_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1D03E++0x01 line.word 0x00 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D03E++0x01 line.word 0x00 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1E000++0x03 line.long 0x00 "CH30_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1E004++0x03 line.long 0x00 "CH30_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1E008++0x03 line.long 0x00 "CH30_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1E00C++0x03 line.long 0x00 "CH30_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1E010++0x03 line.long 0x00 "CH30_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E014++0x03 line.long 0x00 "CH30_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1E020++0x03 line.long 0x00 "TCD30_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1E024++0x01 line.word 0x00 "TCD30_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1E026++0x01 line.word 0x00 "TCD30_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1E028++0x03 line.long 0x00 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E028++0x03 line.long 0x00 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E02C++0x03 line.long 0x00 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1E030++0x03 line.long 0x00 "TCD30_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1E034++0x01 line.word 0x00 "TCD30_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1E036++0x01 line.word 0x00 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E036++0x01 line.word 0x00 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1E038++0x03 line.long 0x00 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1E03C++0x01 line.word 0x00 "TCD30_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1E03E++0x01 line.word 0x00 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E03E++0x01 line.word 0x00 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1F000++0x03 line.long 0x00 "CH31_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1F004++0x03 line.long 0x00 "CH31_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1F008++0x03 line.long 0x00 "CH31_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1F00C++0x03 line.long 0x00 "CH31_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1F010++0x03 line.long 0x00 "CH31_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F014++0x03 line.long 0x00 "CH31_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1F020++0x03 line.long 0x00 "TCD31_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1F024++0x01 line.word 0x00 "TCD31_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1F026++0x01 line.word 0x00 "TCD31_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1F028++0x03 line.long 0x00 "TCD31_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1F028++0x03 line.long 0x00 "TCD31_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1F02C++0x03 line.long 0x00 "TCD31_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1F030++0x03 line.long 0x00 "TCD31_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1F034++0x01 line.word 0x00 "TCD31_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1F036++0x01 line.word 0x00 "TCD31_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F036++0x01 line.word 0x00 "TCD31_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1F038++0x03 line.long 0x00 "TCD31_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1F03C++0x01 line.word 0x00 "TCD31_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1F03E++0x01 line.word 0x00 "TCD31_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F03E++0x01 line.word 0x00 "TCD31_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" tree.end tree "EDMA1_MP (DMA MP)" base ad:0x29010000 group.long 0x00++0x03 line.long 0x00 "MP_CSR,Management Page Control" rbitfld.long 0x00 31. "ACTIVE,DMA Active Status" "0: eDMA is idle,1: eDMA is executing a channel" rbitfld.long 0x00 24.--28. "ACTIVE_ID,Active Channel ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 9. "CX,Cancel Transfer" "0: NORMAL_OPERATION,1: Cancel the remaining data transfer" bitfld.long 0x00 8. "ECX,Cancel Transfer With Error" "0: NORMAL_OPERATION,1: Cancel the remaining data transfer" newline bitfld.long 0x00 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication disabled for all channels,1: Master ID replication available and.." bitfld.long 0x00 6. "GCLC,Global Channel Linking Control" "0: Channel linking disabled for all channels,1: Channel linking available and controlled by.." newline bitfld.long 0x00 5. "HALT,Halt DMA Operations" "0: NORMAL_OPERATION,1: Stall the start of any new channels" bitfld.long 0x00 4. "HAE,Halt After Error" "0: NORMAL_OPERATION,1: Any error causes the HALT field to be set to 1" newline bitfld.long 0x00 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round-robin channel arbitration disabled,1: Round-robin channel arbitration enabled" bitfld.long 0x00 1. "EDBG,Enable Debug" "0: Debug mode disabled,1: Debug mode is enabled" rgroup.long 0x04++0x03 line.long 0x00 "MP_ES,Management Page Error Status" bitfld.long 0x00 31. "VLD,Valid" "0: No ERR fields are set to 1,1: At least one ERR field is set to 1 indicating.." bitfld.long 0x00 24.--28. "ERRCHN,Error Channel Number or Canceled Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "ECX,Transfer Canceled" "0: NO_CANCELED_TRANSFERS,1: Last recorded entry was a canceled transfer.." bitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to.." newline bitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was a bus error on a source" newline bitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was a bus error on a.." rgroup.long 0x08++0x03 line.long 0x00 "MP_INT,Management Page Interrupt Request Status" hexmask.long 0x00 0.--31. 1. "INT,Interrupt Request Status" rgroup.long 0x0C++0x03 line.long 0x00 "MP_HRS,Management Page Hardware Request Status" hexmask.long 0x00 0.--31. 1. "HRS,Hardware Request Status" repeat 32. (increment 0 1) (increment 0 0x04) group.long ($2+0x100)++0x03 line.long 0x00 "CH_GRPRI[$1],Channel Arbitration Group $1" bitfld.long 0x00 0.--4. "GRPRI,Arbitration Group For Channel n" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end tree.end tree "EDMA1_TCD (DMA TCD)" base ad:0x29020000 group.long 0x00++0x03 line.long 0x00 "CH0_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x04++0x03 line.long 0x00 "CH0_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x08++0x03 line.long 0x00 "CH0_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x0C++0x03 line.long 0x00 "CH0_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10++0x03 line.long 0x00 "CH0_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x14++0x03 line.long 0x00 "CH0_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x20++0x03 line.long 0x00 "TCD0_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x24++0x01 line.word 0x00 "TCD0_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x26++0x01 line.word 0x00 "TCD0_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x28++0x03 line.long 0x00 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x28++0x03 line.long 0x00 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x2C++0x03 line.long 0x00 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x30++0x03 line.long 0x00 "TCD0_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x34++0x01 line.word 0x00 "TCD0_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x36++0x01 line.word 0x00 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x36++0x01 line.word 0x00 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x38++0x03 line.long 0x00 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3C++0x01 line.word 0x00 "TCD0_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x3E++0x01 line.word 0x00 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3E++0x01 line.word 0x00 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x10000++0x03 line.long 0x00 "CH1_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x10004++0x03 line.long 0x00 "CH1_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x10008++0x03 line.long 0x00 "CH1_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1000C++0x03 line.long 0x00 "CH1_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10010++0x03 line.long 0x00 "CH1_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10014++0x03 line.long 0x00 "CH1_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x10020++0x03 line.long 0x00 "TCD1_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x10024++0x01 line.word 0x00 "TCD1_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x10026++0x01 line.word 0x00 "TCD1_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x10028++0x03 line.long 0x00 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x10028++0x03 line.long 0x00 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1002C++0x03 line.long 0x00 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x10030++0x03 line.long 0x00 "TCD1_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x10034++0x01 line.word 0x00 "TCD1_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x10036++0x01 line.word 0x00 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10036++0x01 line.word 0x00 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x10038++0x03 line.long 0x00 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1003C++0x01 line.word 0x00 "TCD1_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1003E++0x01 line.word 0x00 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1003E++0x01 line.word 0x00 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x20000++0x03 line.long 0x00 "CH2_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x20004++0x03 line.long 0x00 "CH2_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x20008++0x03 line.long 0x00 "CH2_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x2000C++0x03 line.long 0x00 "CH2_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x20010++0x03 line.long 0x00 "CH2_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20014++0x03 line.long 0x00 "CH2_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x20020++0x03 line.long 0x00 "TCD2_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x20024++0x01 line.word 0x00 "TCD2_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x20026++0x01 line.word 0x00 "TCD2_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x20028++0x03 line.long 0x00 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x20028++0x03 line.long 0x00 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x2002C++0x03 line.long 0x00 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x20030++0x03 line.long 0x00 "TCD2_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x20034++0x01 line.word 0x00 "TCD2_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x20036++0x01 line.word 0x00 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x20036++0x01 line.word 0x00 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x20038++0x03 line.long 0x00 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x2003C++0x01 line.word 0x00 "TCD2_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x2003E++0x01 line.word 0x00 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2003E++0x01 line.word 0x00 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x30000++0x03 line.long 0x00 "CH3_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x30004++0x03 line.long 0x00 "CH3_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x30008++0x03 line.long 0x00 "CH3_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x3000C++0x03 line.long 0x00 "CH3_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x30010++0x03 line.long 0x00 "CH3_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x30014++0x03 line.long 0x00 "CH3_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x30020++0x03 line.long 0x00 "TCD3_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x30024++0x01 line.word 0x00 "TCD3_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x30026++0x01 line.word 0x00 "TCD3_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x30028++0x03 line.long 0x00 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x30028++0x03 line.long 0x00 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x3002C++0x03 line.long 0x00 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x30030++0x03 line.long 0x00 "TCD3_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x30034++0x01 line.word 0x00 "TCD3_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x30036++0x01 line.word 0x00 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x30036++0x01 line.word 0x00 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x30038++0x03 line.long 0x00 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3003C++0x01 line.word 0x00 "TCD3_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x3003E++0x01 line.word 0x00 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3003E++0x01 line.word 0x00 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x40000++0x03 line.long 0x00 "CH4_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x40004++0x03 line.long 0x00 "CH4_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x40008++0x03 line.long 0x00 "CH4_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x4000C++0x03 line.long 0x00 "CH4_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x40010++0x03 line.long 0x00 "CH4_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x40014++0x03 line.long 0x00 "CH4_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x40020++0x03 line.long 0x00 "TCD4_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x40024++0x01 line.word 0x00 "TCD4_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x40026++0x01 line.word 0x00 "TCD4_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x40028++0x03 line.long 0x00 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x40028++0x03 line.long 0x00 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x4002C++0x03 line.long 0x00 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x40030++0x03 line.long 0x00 "TCD4_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x40034++0x01 line.word 0x00 "TCD4_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x40036++0x01 line.word 0x00 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x40036++0x01 line.word 0x00 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x40038++0x03 line.long 0x00 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x4003C++0x01 line.word 0x00 "TCD4_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x4003E++0x01 line.word 0x00 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4003E++0x01 line.word 0x00 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x50000++0x03 line.long 0x00 "CH5_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x50004++0x03 line.long 0x00 "CH5_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x50008++0x03 line.long 0x00 "CH5_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x5000C++0x03 line.long 0x00 "CH5_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x50010++0x03 line.long 0x00 "CH5_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x50014++0x03 line.long 0x00 "CH5_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x50020++0x03 line.long 0x00 "TCD5_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x50024++0x01 line.word 0x00 "TCD5_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x50026++0x01 line.word 0x00 "TCD5_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x50028++0x03 line.long 0x00 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x50028++0x03 line.long 0x00 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x5002C++0x03 line.long 0x00 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x50030++0x03 line.long 0x00 "TCD5_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x50034++0x01 line.word 0x00 "TCD5_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x50036++0x01 line.word 0x00 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x50036++0x01 line.word 0x00 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x50038++0x03 line.long 0x00 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x5003C++0x01 line.word 0x00 "TCD5_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x5003E++0x01 line.word 0x00 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5003E++0x01 line.word 0x00 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x60000++0x03 line.long 0x00 "CH6_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x60004++0x03 line.long 0x00 "CH6_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x60008++0x03 line.long 0x00 "CH6_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x6000C++0x03 line.long 0x00 "CH6_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x60010++0x03 line.long 0x00 "CH6_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x60014++0x03 line.long 0x00 "CH6_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x60020++0x03 line.long 0x00 "TCD6_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x60024++0x01 line.word 0x00 "TCD6_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x60026++0x01 line.word 0x00 "TCD6_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x60028++0x03 line.long 0x00 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x60028++0x03 line.long 0x00 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x6002C++0x03 line.long 0x00 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x60030++0x03 line.long 0x00 "TCD6_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x60034++0x01 line.word 0x00 "TCD6_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x60036++0x01 line.word 0x00 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x60036++0x01 line.word 0x00 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x60038++0x03 line.long 0x00 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x6003C++0x01 line.word 0x00 "TCD6_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x6003E++0x01 line.word 0x00 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6003E++0x01 line.word 0x00 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x70000++0x03 line.long 0x00 "CH7_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x70004++0x03 line.long 0x00 "CH7_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x70008++0x03 line.long 0x00 "CH7_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x7000C++0x03 line.long 0x00 "CH7_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x70010++0x03 line.long 0x00 "CH7_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x70014++0x03 line.long 0x00 "CH7_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x70020++0x03 line.long 0x00 "TCD7_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x70024++0x01 line.word 0x00 "TCD7_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x70026++0x01 line.word 0x00 "TCD7_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x70028++0x03 line.long 0x00 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x70028++0x03 line.long 0x00 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x7002C++0x03 line.long 0x00 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x70030++0x03 line.long 0x00 "TCD7_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x70034++0x01 line.word 0x00 "TCD7_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x70036++0x01 line.word 0x00 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x70036++0x01 line.word 0x00 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x70038++0x03 line.long 0x00 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x7003C++0x01 line.word 0x00 "TCD7_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x7003E++0x01 line.word 0x00 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7003E++0x01 line.word 0x00 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x80000++0x03 line.long 0x00 "CH8_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x80004++0x03 line.long 0x00 "CH8_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x80008++0x03 line.long 0x00 "CH8_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x8000C++0x03 line.long 0x00 "CH8_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80010++0x03 line.long 0x00 "CH8_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x80014++0x03 line.long 0x00 "CH8_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x80020++0x03 line.long 0x00 "TCD8_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x80024++0x01 line.word 0x00 "TCD8_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x80026++0x01 line.word 0x00 "TCD8_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x80028++0x03 line.long 0x00 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x80028++0x03 line.long 0x00 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x8002C++0x03 line.long 0x00 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x80030++0x03 line.long 0x00 "TCD8_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x80034++0x01 line.word 0x00 "TCD8_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x80036++0x01 line.word 0x00 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x80036++0x01 line.word 0x00 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x80038++0x03 line.long 0x00 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x8003C++0x01 line.word 0x00 "TCD8_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x8003E++0x01 line.word 0x00 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8003E++0x01 line.word 0x00 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x90000++0x03 line.long 0x00 "CH9_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x90004++0x03 line.long 0x00 "CH9_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x90008++0x03 line.long 0x00 "CH9_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x9000C++0x03 line.long 0x00 "CH9_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90010++0x03 line.long 0x00 "CH9_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x90014++0x03 line.long 0x00 "CH9_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x90020++0x03 line.long 0x00 "TCD9_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x90024++0x01 line.word 0x00 "TCD9_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x90026++0x01 line.word 0x00 "TCD9_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x90028++0x03 line.long 0x00 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x90028++0x03 line.long 0x00 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x9002C++0x03 line.long 0x00 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x90030++0x03 line.long 0x00 "TCD9_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x90034++0x01 line.word 0x00 "TCD9_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x90036++0x01 line.word 0x00 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x90036++0x01 line.word 0x00 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x90038++0x03 line.long 0x00 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x9003C++0x01 line.word 0x00 "TCD9_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x9003E++0x01 line.word 0x00 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9003E++0x01 line.word 0x00 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xA0000++0x03 line.long 0x00 "CH10_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xA0004++0x03 line.long 0x00 "CH10_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xA0008++0x03 line.long 0x00 "CH10_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xA000C++0x03 line.long 0x00 "CH10_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA0010++0x03 line.long 0x00 "CH10_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA0014++0x03 line.long 0x00 "CH10_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xA0020++0x03 line.long 0x00 "TCD10_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xA0024++0x01 line.word 0x00 "TCD10_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xA0026++0x01 line.word 0x00 "TCD10_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xA0028++0x03 line.long 0x00 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA0028++0x03 line.long 0x00 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA002C++0x03 line.long 0x00 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xA0030++0x03 line.long 0x00 "TCD10_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xA0034++0x01 line.word 0x00 "TCD10_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xA0036++0x01 line.word 0x00 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA0036++0x01 line.word 0x00 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xA0038++0x03 line.long 0x00 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xA003C++0x01 line.word 0x00 "TCD10_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xA003E++0x01 line.word 0x00 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA003E++0x01 line.word 0x00 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xB0000++0x03 line.long 0x00 "CH11_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xB0004++0x03 line.long 0x00 "CH11_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xB0008++0x03 line.long 0x00 "CH11_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xB000C++0x03 line.long 0x00 "CH11_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB0010++0x03 line.long 0x00 "CH11_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB0014++0x03 line.long 0x00 "CH11_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xB0020++0x03 line.long 0x00 "TCD11_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xB0024++0x01 line.word 0x00 "TCD11_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xB0026++0x01 line.word 0x00 "TCD11_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xB0028++0x03 line.long 0x00 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB0028++0x03 line.long 0x00 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB002C++0x03 line.long 0x00 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xB0030++0x03 line.long 0x00 "TCD11_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xB0034++0x01 line.word 0x00 "TCD11_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xB0036++0x01 line.word 0x00 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB0036++0x01 line.word 0x00 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xB0038++0x03 line.long 0x00 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xB003C++0x01 line.word 0x00 "TCD11_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xB003E++0x01 line.word 0x00 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB003E++0x01 line.word 0x00 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xC0000++0x03 line.long 0x00 "CH12_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xC0004++0x03 line.long 0x00 "CH12_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xC0008++0x03 line.long 0x00 "CH12_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xC000C++0x03 line.long 0x00 "CH12_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC0010++0x03 line.long 0x00 "CH12_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC0014++0x03 line.long 0x00 "CH12_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xC0020++0x03 line.long 0x00 "TCD12_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xC0024++0x01 line.word 0x00 "TCD12_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xC0026++0x01 line.word 0x00 "TCD12_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xC0028++0x03 line.long 0x00 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC0028++0x03 line.long 0x00 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC002C++0x03 line.long 0x00 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xC0030++0x03 line.long 0x00 "TCD12_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xC0034++0x01 line.word 0x00 "TCD12_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xC0036++0x01 line.word 0x00 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC0036++0x01 line.word 0x00 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xC0038++0x03 line.long 0x00 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xC003C++0x01 line.word 0x00 "TCD12_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xC003E++0x01 line.word 0x00 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC003E++0x01 line.word 0x00 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xD0000++0x03 line.long 0x00 "CH13_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xD0004++0x03 line.long 0x00 "CH13_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xD0008++0x03 line.long 0x00 "CH13_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xD000C++0x03 line.long 0x00 "CH13_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD0010++0x03 line.long 0x00 "CH13_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD0014++0x03 line.long 0x00 "CH13_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xD0020++0x03 line.long 0x00 "TCD13_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xD0024++0x01 line.word 0x00 "TCD13_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xD0026++0x01 line.word 0x00 "TCD13_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xD0028++0x03 line.long 0x00 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD0028++0x03 line.long 0x00 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD002C++0x03 line.long 0x00 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xD0030++0x03 line.long 0x00 "TCD13_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xD0034++0x01 line.word 0x00 "TCD13_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xD0036++0x01 line.word 0x00 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD0036++0x01 line.word 0x00 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xD0038++0x03 line.long 0x00 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xD003C++0x01 line.word 0x00 "TCD13_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xD003E++0x01 line.word 0x00 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD003E++0x01 line.word 0x00 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xE0000++0x03 line.long 0x00 "CH14_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xE0004++0x03 line.long 0x00 "CH14_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xE0008++0x03 line.long 0x00 "CH14_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xE000C++0x03 line.long 0x00 "CH14_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xE0010++0x03 line.long 0x00 "CH14_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE0014++0x03 line.long 0x00 "CH14_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xE0020++0x03 line.long 0x00 "TCD14_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xE0024++0x01 line.word 0x00 "TCD14_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xE0026++0x01 line.word 0x00 "TCD14_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xE0028++0x03 line.long 0x00 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE0028++0x03 line.long 0x00 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE002C++0x03 line.long 0x00 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xE0030++0x03 line.long 0x00 "TCD14_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xE0034++0x01 line.word 0x00 "TCD14_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xE0036++0x01 line.word 0x00 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE0036++0x01 line.word 0x00 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xE0038++0x03 line.long 0x00 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xE003C++0x01 line.word 0x00 "TCD14_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xE003E++0x01 line.word 0x00 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE003E++0x01 line.word 0x00 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xF0000++0x03 line.long 0x00 "CH15_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xF0004++0x03 line.long 0x00 "CH15_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xF0008++0x03 line.long 0x00 "CH15_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xF000C++0x03 line.long 0x00 "CH15_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xF0010++0x03 line.long 0x00 "CH15_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF0014++0x03 line.long 0x00 "CH15_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xF0020++0x03 line.long 0x00 "TCD15_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xF0024++0x01 line.word 0x00 "TCD15_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xF0026++0x01 line.word 0x00 "TCD15_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xF0028++0x03 line.long 0x00 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF0028++0x03 line.long 0x00 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF002C++0x03 line.long 0x00 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xF0030++0x03 line.long 0x00 "TCD15_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xF0034++0x01 line.word 0x00 "TCD15_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xF0036++0x01 line.word 0x00 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF0036++0x01 line.word 0x00 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xF0038++0x03 line.long 0x00 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xF003C++0x01 line.word 0x00 "TCD15_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xF003E++0x01 line.word 0x00 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF003E++0x01 line.word 0x00 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x100000++0x03 line.long 0x00 "CH16_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x100004++0x03 line.long 0x00 "CH16_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x100008++0x03 line.long 0x00 "CH16_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x10000C++0x03 line.long 0x00 "CH16_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x100010++0x03 line.long 0x00 "CH16_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x100014++0x03 line.long 0x00 "CH16_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x100020++0x03 line.long 0x00 "TCD16_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x100024++0x01 line.word 0x00 "TCD16_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x100026++0x01 line.word 0x00 "TCD16_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x100028++0x03 line.long 0x00 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x100028++0x03 line.long 0x00 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x10002C++0x03 line.long 0x00 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x100030++0x03 line.long 0x00 "TCD16_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x100034++0x01 line.word 0x00 "TCD16_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x100036++0x01 line.word 0x00 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x100036++0x01 line.word 0x00 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x100038++0x03 line.long 0x00 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x10003C++0x01 line.word 0x00 "TCD16_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x10003E++0x01 line.word 0x00 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10003E++0x01 line.word 0x00 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x110000++0x03 line.long 0x00 "CH17_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x110004++0x03 line.long 0x00 "CH17_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x110008++0x03 line.long 0x00 "CH17_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x11000C++0x03 line.long 0x00 "CH17_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x110010++0x03 line.long 0x00 "CH17_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x110014++0x03 line.long 0x00 "CH17_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x110020++0x03 line.long 0x00 "TCD17_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x110024++0x01 line.word 0x00 "TCD17_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x110026++0x01 line.word 0x00 "TCD17_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x110028++0x03 line.long 0x00 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x110028++0x03 line.long 0x00 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x11002C++0x03 line.long 0x00 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x110030++0x03 line.long 0x00 "TCD17_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x110034++0x01 line.word 0x00 "TCD17_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x110036++0x01 line.word 0x00 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x110036++0x01 line.word 0x00 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x110038++0x03 line.long 0x00 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x11003C++0x01 line.word 0x00 "TCD17_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x11003E++0x01 line.word 0x00 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11003E++0x01 line.word 0x00 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x120000++0x03 line.long 0x00 "CH18_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x120004++0x03 line.long 0x00 "CH18_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x120008++0x03 line.long 0x00 "CH18_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x12000C++0x03 line.long 0x00 "CH18_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x120010++0x03 line.long 0x00 "CH18_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x120014++0x03 line.long 0x00 "CH18_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x120020++0x03 line.long 0x00 "TCD18_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x120024++0x01 line.word 0x00 "TCD18_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x120026++0x01 line.word 0x00 "TCD18_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x120028++0x03 line.long 0x00 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x120028++0x03 line.long 0x00 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x12002C++0x03 line.long 0x00 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x120030++0x03 line.long 0x00 "TCD18_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x120034++0x01 line.word 0x00 "TCD18_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x120036++0x01 line.word 0x00 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x120036++0x01 line.word 0x00 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x120038++0x03 line.long 0x00 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x12003C++0x01 line.word 0x00 "TCD18_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x12003E++0x01 line.word 0x00 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12003E++0x01 line.word 0x00 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x130000++0x03 line.long 0x00 "CH19_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x130004++0x03 line.long 0x00 "CH19_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x130008++0x03 line.long 0x00 "CH19_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x13000C++0x03 line.long 0x00 "CH19_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x130010++0x03 line.long 0x00 "CH19_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x130014++0x03 line.long 0x00 "CH19_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x130020++0x03 line.long 0x00 "TCD19_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x130024++0x01 line.word 0x00 "TCD19_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x130026++0x01 line.word 0x00 "TCD19_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x130028++0x03 line.long 0x00 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x130028++0x03 line.long 0x00 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x13002C++0x03 line.long 0x00 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x130030++0x03 line.long 0x00 "TCD19_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x130034++0x01 line.word 0x00 "TCD19_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x130036++0x01 line.word 0x00 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x130036++0x01 line.word 0x00 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x130038++0x03 line.long 0x00 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x13003C++0x01 line.word 0x00 "TCD19_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x13003E++0x01 line.word 0x00 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13003E++0x01 line.word 0x00 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x140000++0x03 line.long 0x00 "CH20_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x140004++0x03 line.long 0x00 "CH20_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x140008++0x03 line.long 0x00 "CH20_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x14000C++0x03 line.long 0x00 "CH20_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x140010++0x03 line.long 0x00 "CH20_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x140014++0x03 line.long 0x00 "CH20_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x140020++0x03 line.long 0x00 "TCD20_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x140024++0x01 line.word 0x00 "TCD20_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x140026++0x01 line.word 0x00 "TCD20_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x140028++0x03 line.long 0x00 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x140028++0x03 line.long 0x00 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x14002C++0x03 line.long 0x00 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x140030++0x03 line.long 0x00 "TCD20_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x140034++0x01 line.word 0x00 "TCD20_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x140036++0x01 line.word 0x00 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x140036++0x01 line.word 0x00 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x140038++0x03 line.long 0x00 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x14003C++0x01 line.word 0x00 "TCD20_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x14003E++0x01 line.word 0x00 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14003E++0x01 line.word 0x00 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x150000++0x03 line.long 0x00 "CH21_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x150004++0x03 line.long 0x00 "CH21_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x150008++0x03 line.long 0x00 "CH21_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x15000C++0x03 line.long 0x00 "CH21_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x150010++0x03 line.long 0x00 "CH21_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x150014++0x03 line.long 0x00 "CH21_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x150020++0x03 line.long 0x00 "TCD21_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x150024++0x01 line.word 0x00 "TCD21_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x150026++0x01 line.word 0x00 "TCD21_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x150028++0x03 line.long 0x00 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x150028++0x03 line.long 0x00 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x15002C++0x03 line.long 0x00 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x150030++0x03 line.long 0x00 "TCD21_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x150034++0x01 line.word 0x00 "TCD21_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x150036++0x01 line.word 0x00 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x150036++0x01 line.word 0x00 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x150038++0x03 line.long 0x00 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x15003C++0x01 line.word 0x00 "TCD21_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x15003E++0x01 line.word 0x00 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15003E++0x01 line.word 0x00 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x160000++0x03 line.long 0x00 "CH22_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x160004++0x03 line.long 0x00 "CH22_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x160008++0x03 line.long 0x00 "CH22_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x16000C++0x03 line.long 0x00 "CH22_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x160010++0x03 line.long 0x00 "CH22_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x160014++0x03 line.long 0x00 "CH22_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x160020++0x03 line.long 0x00 "TCD22_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x160024++0x01 line.word 0x00 "TCD22_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x160026++0x01 line.word 0x00 "TCD22_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x160028++0x03 line.long 0x00 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x160028++0x03 line.long 0x00 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x16002C++0x03 line.long 0x00 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x160030++0x03 line.long 0x00 "TCD22_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x160034++0x01 line.word 0x00 "TCD22_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x160036++0x01 line.word 0x00 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x160036++0x01 line.word 0x00 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x160038++0x03 line.long 0x00 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x16003C++0x01 line.word 0x00 "TCD22_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x16003E++0x01 line.word 0x00 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16003E++0x01 line.word 0x00 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x170000++0x03 line.long 0x00 "CH23_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x170004++0x03 line.long 0x00 "CH23_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x170008++0x03 line.long 0x00 "CH23_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x17000C++0x03 line.long 0x00 "CH23_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x170010++0x03 line.long 0x00 "CH23_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x170014++0x03 line.long 0x00 "CH23_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x170020++0x03 line.long 0x00 "TCD23_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x170024++0x01 line.word 0x00 "TCD23_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x170026++0x01 line.word 0x00 "TCD23_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x170028++0x03 line.long 0x00 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x170028++0x03 line.long 0x00 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x17002C++0x03 line.long 0x00 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x170030++0x03 line.long 0x00 "TCD23_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x170034++0x01 line.word 0x00 "TCD23_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x170036++0x01 line.word 0x00 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x170036++0x01 line.word 0x00 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x170038++0x03 line.long 0x00 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x17003C++0x01 line.word 0x00 "TCD23_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x17003E++0x01 line.word 0x00 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17003E++0x01 line.word 0x00 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x180000++0x03 line.long 0x00 "CH24_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x180004++0x03 line.long 0x00 "CH24_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x180008++0x03 line.long 0x00 "CH24_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x18000C++0x03 line.long 0x00 "CH24_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x180010++0x03 line.long 0x00 "CH24_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x180014++0x03 line.long 0x00 "CH24_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x180020++0x03 line.long 0x00 "TCD24_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x180024++0x01 line.word 0x00 "TCD24_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x180026++0x01 line.word 0x00 "TCD24_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x180028++0x03 line.long 0x00 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x180028++0x03 line.long 0x00 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x18002C++0x03 line.long 0x00 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x180030++0x03 line.long 0x00 "TCD24_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x180034++0x01 line.word 0x00 "TCD24_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x180036++0x01 line.word 0x00 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x180036++0x01 line.word 0x00 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x180038++0x03 line.long 0x00 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x18003C++0x01 line.word 0x00 "TCD24_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x18003E++0x01 line.word 0x00 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18003E++0x01 line.word 0x00 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x190000++0x03 line.long 0x00 "CH25_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x190004++0x03 line.long 0x00 "CH25_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x190008++0x03 line.long 0x00 "CH25_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x19000C++0x03 line.long 0x00 "CH25_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x190010++0x03 line.long 0x00 "CH25_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x190014++0x03 line.long 0x00 "CH25_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x190020++0x03 line.long 0x00 "TCD25_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x190024++0x01 line.word 0x00 "TCD25_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x190026++0x01 line.word 0x00 "TCD25_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x190028++0x03 line.long 0x00 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x190028++0x03 line.long 0x00 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x19002C++0x03 line.long 0x00 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x190030++0x03 line.long 0x00 "TCD25_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x190034++0x01 line.word 0x00 "TCD25_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x190036++0x01 line.word 0x00 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x190036++0x01 line.word 0x00 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x190038++0x03 line.long 0x00 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x19003C++0x01 line.word 0x00 "TCD25_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x19003E++0x01 line.word 0x00 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19003E++0x01 line.word 0x00 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1A0000++0x03 line.long 0x00 "CH26_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1A0004++0x03 line.long 0x00 "CH26_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1A0008++0x03 line.long 0x00 "CH26_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1A000C++0x03 line.long 0x00 "CH26_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1A0010++0x03 line.long 0x00 "CH26_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A0014++0x03 line.long 0x00 "CH26_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1A0020++0x03 line.long 0x00 "TCD26_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1A0024++0x01 line.word 0x00 "TCD26_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1A0026++0x01 line.word 0x00 "TCD26_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1A0028++0x03 line.long 0x00 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A0028++0x03 line.long 0x00 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A002C++0x03 line.long 0x00 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1A0030++0x03 line.long 0x00 "TCD26_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1A0034++0x01 line.word 0x00 "TCD26_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1A0036++0x01 line.word 0x00 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A0036++0x01 line.word 0x00 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1A0038++0x03 line.long 0x00 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1A003C++0x01 line.word 0x00 "TCD26_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1A003E++0x01 line.word 0x00 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A003E++0x01 line.word 0x00 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1B0000++0x03 line.long 0x00 "CH27_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1B0004++0x03 line.long 0x00 "CH27_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1B0008++0x03 line.long 0x00 "CH27_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1B000C++0x03 line.long 0x00 "CH27_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1B0010++0x03 line.long 0x00 "CH27_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B0014++0x03 line.long 0x00 "CH27_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1B0020++0x03 line.long 0x00 "TCD27_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1B0024++0x01 line.word 0x00 "TCD27_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1B0026++0x01 line.word 0x00 "TCD27_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1B0028++0x03 line.long 0x00 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B0028++0x03 line.long 0x00 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B002C++0x03 line.long 0x00 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1B0030++0x03 line.long 0x00 "TCD27_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1B0034++0x01 line.word 0x00 "TCD27_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1B0036++0x01 line.word 0x00 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B0036++0x01 line.word 0x00 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1B0038++0x03 line.long 0x00 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1B003C++0x01 line.word 0x00 "TCD27_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1B003E++0x01 line.word 0x00 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B003E++0x01 line.word 0x00 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1C0000++0x03 line.long 0x00 "CH28_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1C0004++0x03 line.long 0x00 "CH28_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1C0008++0x03 line.long 0x00 "CH28_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1C000C++0x03 line.long 0x00 "CH28_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1C0010++0x03 line.long 0x00 "CH28_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C0014++0x03 line.long 0x00 "CH28_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1C0020++0x03 line.long 0x00 "TCD28_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1C0024++0x01 line.word 0x00 "TCD28_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1C0026++0x01 line.word 0x00 "TCD28_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1C0028++0x03 line.long 0x00 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C0028++0x03 line.long 0x00 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C002C++0x03 line.long 0x00 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1C0030++0x03 line.long 0x00 "TCD28_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1C0034++0x01 line.word 0x00 "TCD28_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1C0036++0x01 line.word 0x00 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C0036++0x01 line.word 0x00 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1C0038++0x03 line.long 0x00 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1C003C++0x01 line.word 0x00 "TCD28_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1C003E++0x01 line.word 0x00 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C003E++0x01 line.word 0x00 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1D0000++0x03 line.long 0x00 "CH29_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1D0004++0x03 line.long 0x00 "CH29_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1D0008++0x03 line.long 0x00 "CH29_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1D000C++0x03 line.long 0x00 "CH29_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D0010++0x03 line.long 0x00 "CH29_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D0014++0x03 line.long 0x00 "CH29_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1D0020++0x03 line.long 0x00 "TCD29_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1D0024++0x01 line.word 0x00 "TCD29_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1D0026++0x01 line.word 0x00 "TCD29_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1D0028++0x03 line.long 0x00 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D0028++0x03 line.long 0x00 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D002C++0x03 line.long 0x00 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1D0030++0x03 line.long 0x00 "TCD29_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1D0034++0x01 line.word 0x00 "TCD29_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1D0036++0x01 line.word 0x00 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D0036++0x01 line.word 0x00 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1D0038++0x03 line.long 0x00 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1D003C++0x01 line.word 0x00 "TCD29_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1D003E++0x01 line.word 0x00 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D003E++0x01 line.word 0x00 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1E0000++0x03 line.long 0x00 "CH30_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1E0004++0x03 line.long 0x00 "CH30_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1E0008++0x03 line.long 0x00 "CH30_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1E000C++0x03 line.long 0x00 "CH30_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1E0010++0x03 line.long 0x00 "CH30_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E0014++0x03 line.long 0x00 "CH30_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1E0020++0x03 line.long 0x00 "TCD30_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1E0024++0x01 line.word 0x00 "TCD30_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1E0026++0x01 line.word 0x00 "TCD30_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1E0028++0x03 line.long 0x00 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E0028++0x03 line.long 0x00 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E002C++0x03 line.long 0x00 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1E0030++0x03 line.long 0x00 "TCD30_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1E0034++0x01 line.word 0x00 "TCD30_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1E0036++0x01 line.word 0x00 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E0036++0x01 line.word 0x00 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1E0038++0x03 line.long 0x00 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1E003C++0x01 line.word 0x00 "TCD30_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1E003E++0x01 line.word 0x00 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E003E++0x01 line.word 0x00 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1F0000++0x03 line.long 0x00 "CH31_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1F0004++0x03 line.long 0x00 "CH31_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1F0008++0x03 line.long 0x00 "CH31_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1F000C++0x03 line.long 0x00 "CH31_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1F0010++0x03 line.long 0x00 "CH31_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F0014++0x03 line.long 0x00 "CH31_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1F0020++0x03 line.long 0x00 "TCD31_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1F0024++0x01 line.word 0x00 "TCD31_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1F0026++0x01 line.word 0x00 "TCD31_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1F0028++0x03 line.long 0x00 "TCD31_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1F0028++0x03 line.long 0x00 "TCD31_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1F002C++0x03 line.long 0x00 "TCD31_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1F0030++0x03 line.long 0x00 "TCD31_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1F0034++0x01 line.word 0x00 "TCD31_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1F0036++0x01 line.word 0x00 "TCD31_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F0036++0x01 line.word 0x00 "TCD31_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1F0038++0x03 line.long 0x00 "TCD31_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1F003C++0x01 line.word 0x00 "TCD31_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,1: Enable eDMA master high-priority elevation..,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1F003E++0x01 line.word 0x00 "TCD31_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F003E++0x01 line.word 0x00 "TCD31_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" tree.end tree "EDMA2_MP (DMA MP)" base ad:0x2D800000 group.long 0x00++0x03 line.long 0x00 "MP_CSR,Management Page Control" rbitfld.long 0x00 31. "ACTIVE,DMA Active Status" "0: eDMA is idle,1: eDMA is executing a channel" rbitfld.long 0x00 24.--28. "ACTIVE_ID,Active Channel ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 9. "CX,Cancel Transfer" "0: NORMAL_OPERATION,1: Cancel the remaining data transfer" bitfld.long 0x00 8. "ECX,Cancel Transfer With Error" "0: NORMAL_OPERATION,1: Cancel the remaining data transfer" newline bitfld.long 0x00 7. "GMRC,Global Master ID Replication Control" "0: Master ID replication disabled for all channels,1: Master ID replication available and.." bitfld.long 0x00 6. "GCLC,Global Channel Linking Control" "0: Channel linking disabled for all channels,1: Channel linking available and controlled by.." newline bitfld.long 0x00 5. "HALT,Halt DMA Operations" "0: NORMAL_OPERATION,1: Stall the start of any new channels" bitfld.long 0x00 4. "HAE,Halt After Error" "0: NORMAL_OPERATION,1: Any error causes the HALT field to be set to 1" newline bitfld.long 0x00 2. "ERCA,Enable Round Robin Channel Arbitration" "0: Round-robin channel arbitration disabled,1: Round-robin channel arbitration enabled" bitfld.long 0x00 1. "EDBG,Enable Debug" "0: Debug mode disabled,1: Debug mode is enabled" rgroup.long 0x04++0x03 line.long 0x00 "MP_ES,Management Page Error Status" bitfld.long 0x00 31. "VLD,Valid" "0: No ERR fields are set to 1,1: At least one ERR field is set to 1 indicating.." bitfld.long 0x00 24.--28. "ERRCHN,Error Channel Number or Canceled Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "ECX,Transfer Canceled" "0: NO_CANCELED_TRANSFERS,1: Last recorded entry was a canceled transfer.." bitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline bitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: The last recorded error was NBYTES equal to.." newline bitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." bitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was a bus error on a source" newline bitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was a bus error on a.." rgroup.long 0x08++0x03 line.long 0x00 "MP_INT,Management Page Interrupt Request Status" hexmask.long 0x00 0.--31. 1. "INT,Interrupt Request Status" rgroup.long 0x0C++0x03 line.long 0x00 "MP_HRS,Management Page Hardware Request Status" hexmask.long 0x00 0.--31. 1. "HRS,Hardware Request Status" repeat 32. (increment 0 1) (increment 0 0x04) group.long ($2+0x100)++0x03 line.long 0x00 "CH_GRPRI[$1],Channel Arbitration Group $1" bitfld.long 0x00 0.--4. "GRPRI,Arbitration Group For Channel n" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end tree.end tree "EDMA2_TCD (DMA TCD)" base ad:0x2D810000 group.long 0x00++0x03 line.long 0x00 "CH0_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x04++0x03 line.long 0x00 "CH0_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x08++0x03 line.long 0x00 "CH0_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x0C++0x03 line.long 0x00 "CH0_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10++0x03 line.long 0x00 "CH0_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x14++0x03 line.long 0x00 "CH0_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x20++0x03 line.long 0x00 "TCD0_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x24++0x01 line.word 0x00 "TCD0_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x26++0x01 line.word 0x00 "TCD0_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x28++0x03 line.long 0x00 "TCD0_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x28++0x03 line.long 0x00 "TCD0_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x2C++0x03 line.long 0x00 "TCD0_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x30++0x03 line.long 0x00 "TCD0_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x34++0x01 line.word 0x00 "TCD0_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x36++0x01 line.word 0x00 "TCD0_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x36++0x01 line.word 0x00 "TCD0_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x38++0x03 line.long 0x00 "TCD0_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3C++0x01 line.word 0x00 "TCD0_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x3E++0x01 line.word 0x00 "TCD0_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3E++0x01 line.word 0x00 "TCD0_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x10000++0x03 line.long 0x00 "CH1_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x10004++0x03 line.long 0x00 "CH1_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x10008++0x03 line.long 0x00 "CH1_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1000C++0x03 line.long 0x00 "CH1_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10010++0x03 line.long 0x00 "CH1_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x10014++0x03 line.long 0x00 "CH1_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x10020++0x03 line.long 0x00 "TCD1_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x10024++0x01 line.word 0x00 "TCD1_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x10026++0x01 line.word 0x00 "TCD1_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x10028++0x03 line.long 0x00 "TCD1_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x10028++0x03 line.long 0x00 "TCD1_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1002C++0x03 line.long 0x00 "TCD1_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x10030++0x03 line.long 0x00 "TCD1_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x10034++0x01 line.word 0x00 "TCD1_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x10036++0x01 line.word 0x00 "TCD1_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x10036++0x01 line.word 0x00 "TCD1_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x10038++0x03 line.long 0x00 "TCD1_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1003C++0x01 line.word 0x00 "TCD1_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1003E++0x01 line.word 0x00 "TCD1_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1003E++0x01 line.word 0x00 "TCD1_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x20000++0x03 line.long 0x00 "CH2_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x20004++0x03 line.long 0x00 "CH2_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x20008++0x03 line.long 0x00 "CH2_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x2000C++0x03 line.long 0x00 "CH2_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x20010++0x03 line.long 0x00 "CH2_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x20014++0x03 line.long 0x00 "CH2_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x20020++0x03 line.long 0x00 "TCD2_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x20024++0x01 line.word 0x00 "TCD2_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x20026++0x01 line.word 0x00 "TCD2_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x20028++0x03 line.long 0x00 "TCD2_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x20028++0x03 line.long 0x00 "TCD2_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x2002C++0x03 line.long 0x00 "TCD2_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x20030++0x03 line.long 0x00 "TCD2_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x20034++0x01 line.word 0x00 "TCD2_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x20036++0x01 line.word 0x00 "TCD2_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x20036++0x01 line.word 0x00 "TCD2_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x20038++0x03 line.long 0x00 "TCD2_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x2003C++0x01 line.word 0x00 "TCD2_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x2003E++0x01 line.word 0x00 "TCD2_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x2003E++0x01 line.word 0x00 "TCD2_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x30000++0x03 line.long 0x00 "CH3_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x30004++0x03 line.long 0x00 "CH3_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x30008++0x03 line.long 0x00 "CH3_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x3000C++0x03 line.long 0x00 "CH3_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x30010++0x03 line.long 0x00 "CH3_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x30014++0x03 line.long 0x00 "CH3_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x30020++0x03 line.long 0x00 "TCD3_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x30024++0x01 line.word 0x00 "TCD3_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x30026++0x01 line.word 0x00 "TCD3_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x30028++0x03 line.long 0x00 "TCD3_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x30028++0x03 line.long 0x00 "TCD3_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x3002C++0x03 line.long 0x00 "TCD3_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x30030++0x03 line.long 0x00 "TCD3_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x30034++0x01 line.word 0x00 "TCD3_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x30036++0x01 line.word 0x00 "TCD3_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x30036++0x01 line.word 0x00 "TCD3_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x30038++0x03 line.long 0x00 "TCD3_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x3003C++0x01 line.word 0x00 "TCD3_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x3003E++0x01 line.word 0x00 "TCD3_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x3003E++0x01 line.word 0x00 "TCD3_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x40000++0x03 line.long 0x00 "CH4_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x40004++0x03 line.long 0x00 "CH4_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x40008++0x03 line.long 0x00 "CH4_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x4000C++0x03 line.long 0x00 "CH4_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x40010++0x03 line.long 0x00 "CH4_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x40014++0x03 line.long 0x00 "CH4_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x40020++0x03 line.long 0x00 "TCD4_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x40024++0x01 line.word 0x00 "TCD4_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x40026++0x01 line.word 0x00 "TCD4_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x40028++0x03 line.long 0x00 "TCD4_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x40028++0x03 line.long 0x00 "TCD4_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x4002C++0x03 line.long 0x00 "TCD4_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x40030++0x03 line.long 0x00 "TCD4_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x40034++0x01 line.word 0x00 "TCD4_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x40036++0x01 line.word 0x00 "TCD4_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x40036++0x01 line.word 0x00 "TCD4_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x40038++0x03 line.long 0x00 "TCD4_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x4003C++0x01 line.word 0x00 "TCD4_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x4003E++0x01 line.word 0x00 "TCD4_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x4003E++0x01 line.word 0x00 "TCD4_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x50000++0x03 line.long 0x00 "CH5_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x50004++0x03 line.long 0x00 "CH5_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x50008++0x03 line.long 0x00 "CH5_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x5000C++0x03 line.long 0x00 "CH5_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x50010++0x03 line.long 0x00 "CH5_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x50014++0x03 line.long 0x00 "CH5_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x50020++0x03 line.long 0x00 "TCD5_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x50024++0x01 line.word 0x00 "TCD5_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x50026++0x01 line.word 0x00 "TCD5_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x50028++0x03 line.long 0x00 "TCD5_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x50028++0x03 line.long 0x00 "TCD5_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x5002C++0x03 line.long 0x00 "TCD5_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x50030++0x03 line.long 0x00 "TCD5_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x50034++0x01 line.word 0x00 "TCD5_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x50036++0x01 line.word 0x00 "TCD5_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x50036++0x01 line.word 0x00 "TCD5_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x50038++0x03 line.long 0x00 "TCD5_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x5003C++0x01 line.word 0x00 "TCD5_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x5003E++0x01 line.word 0x00 "TCD5_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x5003E++0x01 line.word 0x00 "TCD5_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x60000++0x03 line.long 0x00 "CH6_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x60004++0x03 line.long 0x00 "CH6_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x60008++0x03 line.long 0x00 "CH6_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x6000C++0x03 line.long 0x00 "CH6_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x60010++0x03 line.long 0x00 "CH6_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x60014++0x03 line.long 0x00 "CH6_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x60020++0x03 line.long 0x00 "TCD6_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x60024++0x01 line.word 0x00 "TCD6_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x60026++0x01 line.word 0x00 "TCD6_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x60028++0x03 line.long 0x00 "TCD6_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x60028++0x03 line.long 0x00 "TCD6_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x6002C++0x03 line.long 0x00 "TCD6_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x60030++0x03 line.long 0x00 "TCD6_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x60034++0x01 line.word 0x00 "TCD6_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x60036++0x01 line.word 0x00 "TCD6_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x60036++0x01 line.word 0x00 "TCD6_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x60038++0x03 line.long 0x00 "TCD6_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x6003C++0x01 line.word 0x00 "TCD6_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x6003E++0x01 line.word 0x00 "TCD6_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x6003E++0x01 line.word 0x00 "TCD6_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x70000++0x03 line.long 0x00 "CH7_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x70004++0x03 line.long 0x00 "CH7_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x70008++0x03 line.long 0x00 "CH7_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x7000C++0x03 line.long 0x00 "CH7_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x70010++0x03 line.long 0x00 "CH7_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x70014++0x03 line.long 0x00 "CH7_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x70020++0x03 line.long 0x00 "TCD7_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x70024++0x01 line.word 0x00 "TCD7_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x70026++0x01 line.word 0x00 "TCD7_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x70028++0x03 line.long 0x00 "TCD7_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x70028++0x03 line.long 0x00 "TCD7_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x7002C++0x03 line.long 0x00 "TCD7_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x70030++0x03 line.long 0x00 "TCD7_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x70034++0x01 line.word 0x00 "TCD7_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x70036++0x01 line.word 0x00 "TCD7_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x70036++0x01 line.word 0x00 "TCD7_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x70038++0x03 line.long 0x00 "TCD7_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x7003C++0x01 line.word 0x00 "TCD7_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x7003E++0x01 line.word 0x00 "TCD7_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x7003E++0x01 line.word 0x00 "TCD7_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x80000++0x03 line.long 0x00 "CH8_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x80004++0x03 line.long 0x00 "CH8_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x80008++0x03 line.long 0x00 "CH8_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x8000C++0x03 line.long 0x00 "CH8_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80010++0x03 line.long 0x00 "CH8_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x80014++0x03 line.long 0x00 "CH8_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x80020++0x03 line.long 0x00 "TCD8_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x80024++0x01 line.word 0x00 "TCD8_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x80026++0x01 line.word 0x00 "TCD8_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x80028++0x03 line.long 0x00 "TCD8_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x80028++0x03 line.long 0x00 "TCD8_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x8002C++0x03 line.long 0x00 "TCD8_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x80030++0x03 line.long 0x00 "TCD8_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x80034++0x01 line.word 0x00 "TCD8_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x80036++0x01 line.word 0x00 "TCD8_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x80036++0x01 line.word 0x00 "TCD8_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x80038++0x03 line.long 0x00 "TCD8_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x8003C++0x01 line.word 0x00 "TCD8_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x8003E++0x01 line.word 0x00 "TCD8_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x8003E++0x01 line.word 0x00 "TCD8_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x90000++0x03 line.long 0x00 "CH9_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x90004++0x03 line.long 0x00 "CH9_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x90008++0x03 line.long 0x00 "CH9_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x9000C++0x03 line.long 0x00 "CH9_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90010++0x03 line.long 0x00 "CH9_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x90014++0x03 line.long 0x00 "CH9_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x90020++0x03 line.long 0x00 "TCD9_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x90024++0x01 line.word 0x00 "TCD9_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x90026++0x01 line.word 0x00 "TCD9_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x90028++0x03 line.long 0x00 "TCD9_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x90028++0x03 line.long 0x00 "TCD9_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x9002C++0x03 line.long 0x00 "TCD9_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x90030++0x03 line.long 0x00 "TCD9_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x90034++0x01 line.word 0x00 "TCD9_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x90036++0x01 line.word 0x00 "TCD9_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x90036++0x01 line.word 0x00 "TCD9_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x90038++0x03 line.long 0x00 "TCD9_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x9003C++0x01 line.word 0x00 "TCD9_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x9003E++0x01 line.word 0x00 "TCD9_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x9003E++0x01 line.word 0x00 "TCD9_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xA0000++0x03 line.long 0x00 "CH10_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xA0004++0x03 line.long 0x00 "CH10_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xA0008++0x03 line.long 0x00 "CH10_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xA000C++0x03 line.long 0x00 "CH10_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA0010++0x03 line.long 0x00 "CH10_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xA0014++0x03 line.long 0x00 "CH10_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xA0020++0x03 line.long 0x00 "TCD10_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xA0024++0x01 line.word 0x00 "TCD10_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xA0026++0x01 line.word 0x00 "TCD10_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xA0028++0x03 line.long 0x00 "TCD10_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA0028++0x03 line.long 0x00 "TCD10_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xA002C++0x03 line.long 0x00 "TCD10_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xA0030++0x03 line.long 0x00 "TCD10_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xA0034++0x01 line.word 0x00 "TCD10_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xA0036++0x01 line.word 0x00 "TCD10_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xA0036++0x01 line.word 0x00 "TCD10_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xA0038++0x03 line.long 0x00 "TCD10_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xA003C++0x01 line.word 0x00 "TCD10_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xA003E++0x01 line.word 0x00 "TCD10_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xA003E++0x01 line.word 0x00 "TCD10_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xB0000++0x03 line.long 0x00 "CH11_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xB0004++0x03 line.long 0x00 "CH11_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xB0008++0x03 line.long 0x00 "CH11_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xB000C++0x03 line.long 0x00 "CH11_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB0010++0x03 line.long 0x00 "CH11_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xB0014++0x03 line.long 0x00 "CH11_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xB0020++0x03 line.long 0x00 "TCD11_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xB0024++0x01 line.word 0x00 "TCD11_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xB0026++0x01 line.word 0x00 "TCD11_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xB0028++0x03 line.long 0x00 "TCD11_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB0028++0x03 line.long 0x00 "TCD11_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xB002C++0x03 line.long 0x00 "TCD11_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xB0030++0x03 line.long 0x00 "TCD11_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xB0034++0x01 line.word 0x00 "TCD11_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xB0036++0x01 line.word 0x00 "TCD11_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xB0036++0x01 line.word 0x00 "TCD11_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xB0038++0x03 line.long 0x00 "TCD11_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xB003C++0x01 line.word 0x00 "TCD11_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xB003E++0x01 line.word 0x00 "TCD11_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xB003E++0x01 line.word 0x00 "TCD11_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xC0000++0x03 line.long 0x00 "CH12_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xC0004++0x03 line.long 0x00 "CH12_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xC0008++0x03 line.long 0x00 "CH12_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xC000C++0x03 line.long 0x00 "CH12_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC0010++0x03 line.long 0x00 "CH12_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xC0014++0x03 line.long 0x00 "CH12_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xC0020++0x03 line.long 0x00 "TCD12_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xC0024++0x01 line.word 0x00 "TCD12_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xC0026++0x01 line.word 0x00 "TCD12_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xC0028++0x03 line.long 0x00 "TCD12_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC0028++0x03 line.long 0x00 "TCD12_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xC002C++0x03 line.long 0x00 "TCD12_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xC0030++0x03 line.long 0x00 "TCD12_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xC0034++0x01 line.word 0x00 "TCD12_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xC0036++0x01 line.word 0x00 "TCD12_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xC0036++0x01 line.word 0x00 "TCD12_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xC0038++0x03 line.long 0x00 "TCD12_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xC003C++0x01 line.word 0x00 "TCD12_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xC003E++0x01 line.word 0x00 "TCD12_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xC003E++0x01 line.word 0x00 "TCD12_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xD0000++0x03 line.long 0x00 "CH13_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xD0004++0x03 line.long 0x00 "CH13_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xD0008++0x03 line.long 0x00 "CH13_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xD000C++0x03 line.long 0x00 "CH13_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD0010++0x03 line.long 0x00 "CH13_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xD0014++0x03 line.long 0x00 "CH13_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xD0020++0x03 line.long 0x00 "TCD13_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xD0024++0x01 line.word 0x00 "TCD13_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xD0026++0x01 line.word 0x00 "TCD13_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xD0028++0x03 line.long 0x00 "TCD13_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD0028++0x03 line.long 0x00 "TCD13_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xD002C++0x03 line.long 0x00 "TCD13_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xD0030++0x03 line.long 0x00 "TCD13_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xD0034++0x01 line.word 0x00 "TCD13_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xD0036++0x01 line.word 0x00 "TCD13_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xD0036++0x01 line.word 0x00 "TCD13_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xD0038++0x03 line.long 0x00 "TCD13_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xD003C++0x01 line.word 0x00 "TCD13_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xD003E++0x01 line.word 0x00 "TCD13_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xD003E++0x01 line.word 0x00 "TCD13_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xE0000++0x03 line.long 0x00 "CH14_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xE0004++0x03 line.long 0x00 "CH14_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xE0008++0x03 line.long 0x00 "CH14_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xE000C++0x03 line.long 0x00 "CH14_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xE0010++0x03 line.long 0x00 "CH14_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xE0014++0x03 line.long 0x00 "CH14_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xE0020++0x03 line.long 0x00 "TCD14_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xE0024++0x01 line.word 0x00 "TCD14_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xE0026++0x01 line.word 0x00 "TCD14_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xE0028++0x03 line.long 0x00 "TCD14_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE0028++0x03 line.long 0x00 "TCD14_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xE002C++0x03 line.long 0x00 "TCD14_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xE0030++0x03 line.long 0x00 "TCD14_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xE0034++0x01 line.word 0x00 "TCD14_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xE0036++0x01 line.word 0x00 "TCD14_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xE0036++0x01 line.word 0x00 "TCD14_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xE0038++0x03 line.long 0x00 "TCD14_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xE003C++0x01 line.word 0x00 "TCD14_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xE003E++0x01 line.word 0x00 "TCD14_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xE003E++0x01 line.word 0x00 "TCD14_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0xF0000++0x03 line.long 0x00 "CH15_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0xF0004++0x03 line.long 0x00 "CH15_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0xF0008++0x03 line.long 0x00 "CH15_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0xF000C++0x03 line.long 0x00 "CH15_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xF0010++0x03 line.long 0x00 "CH15_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0xF0014++0x03 line.long 0x00 "CH15_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0xF0020++0x03 line.long 0x00 "TCD15_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0xF0024++0x01 line.word 0x00 "TCD15_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0xF0026++0x01 line.word 0x00 "TCD15_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0xF0028++0x03 line.long 0x00 "TCD15_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF0028++0x03 line.long 0x00 "TCD15_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0xF002C++0x03 line.long 0x00 "TCD15_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0xF0030++0x03 line.long 0x00 "TCD15_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0xF0034++0x01 line.word 0x00 "TCD15_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0xF0036++0x01 line.word 0x00 "TCD15_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0xF0036++0x01 line.word 0x00 "TCD15_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0xF0038++0x03 line.long 0x00 "TCD15_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0xF003C++0x01 line.word 0x00 "TCD15_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0xF003E++0x01 line.word 0x00 "TCD15_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0xF003E++0x01 line.word 0x00 "TCD15_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x100000++0x03 line.long 0x00 "CH16_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x100004++0x03 line.long 0x00 "CH16_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x100008++0x03 line.long 0x00 "CH16_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x10000C++0x03 line.long 0x00 "CH16_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x100010++0x03 line.long 0x00 "CH16_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x100014++0x03 line.long 0x00 "CH16_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x100020++0x03 line.long 0x00 "TCD16_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x100024++0x01 line.word 0x00 "TCD16_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x100026++0x01 line.word 0x00 "TCD16_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x100028++0x03 line.long 0x00 "TCD16_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x100028++0x03 line.long 0x00 "TCD16_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x10002C++0x03 line.long 0x00 "TCD16_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x100030++0x03 line.long 0x00 "TCD16_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x100034++0x01 line.word 0x00 "TCD16_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x100036++0x01 line.word 0x00 "TCD16_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x100036++0x01 line.word 0x00 "TCD16_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x100038++0x03 line.long 0x00 "TCD16_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x10003C++0x01 line.word 0x00 "TCD16_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x10003E++0x01 line.word 0x00 "TCD16_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x10003E++0x01 line.word 0x00 "TCD16_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x110000++0x03 line.long 0x00 "CH17_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x110004++0x03 line.long 0x00 "CH17_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x110008++0x03 line.long 0x00 "CH17_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x11000C++0x03 line.long 0x00 "CH17_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x110010++0x03 line.long 0x00 "CH17_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x110014++0x03 line.long 0x00 "CH17_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x110020++0x03 line.long 0x00 "TCD17_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x110024++0x01 line.word 0x00 "TCD17_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x110026++0x01 line.word 0x00 "TCD17_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x110028++0x03 line.long 0x00 "TCD17_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x110028++0x03 line.long 0x00 "TCD17_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x11002C++0x03 line.long 0x00 "TCD17_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x110030++0x03 line.long 0x00 "TCD17_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x110034++0x01 line.word 0x00 "TCD17_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x110036++0x01 line.word 0x00 "TCD17_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x110036++0x01 line.word 0x00 "TCD17_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x110038++0x03 line.long 0x00 "TCD17_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x11003C++0x01 line.word 0x00 "TCD17_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x11003E++0x01 line.word 0x00 "TCD17_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x11003E++0x01 line.word 0x00 "TCD17_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x120000++0x03 line.long 0x00 "CH18_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x120004++0x03 line.long 0x00 "CH18_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x120008++0x03 line.long 0x00 "CH18_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x12000C++0x03 line.long 0x00 "CH18_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x120010++0x03 line.long 0x00 "CH18_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x120014++0x03 line.long 0x00 "CH18_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x120020++0x03 line.long 0x00 "TCD18_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x120024++0x01 line.word 0x00 "TCD18_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x120026++0x01 line.word 0x00 "TCD18_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x120028++0x03 line.long 0x00 "TCD18_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x120028++0x03 line.long 0x00 "TCD18_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x12002C++0x03 line.long 0x00 "TCD18_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x120030++0x03 line.long 0x00 "TCD18_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x120034++0x01 line.word 0x00 "TCD18_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x120036++0x01 line.word 0x00 "TCD18_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x120036++0x01 line.word 0x00 "TCD18_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x120038++0x03 line.long 0x00 "TCD18_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x12003C++0x01 line.word 0x00 "TCD18_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x12003E++0x01 line.word 0x00 "TCD18_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x12003E++0x01 line.word 0x00 "TCD18_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x130000++0x03 line.long 0x00 "CH19_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x130004++0x03 line.long 0x00 "CH19_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x130008++0x03 line.long 0x00 "CH19_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x13000C++0x03 line.long 0x00 "CH19_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x130010++0x03 line.long 0x00 "CH19_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x130014++0x03 line.long 0x00 "CH19_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x130020++0x03 line.long 0x00 "TCD19_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x130024++0x01 line.word 0x00 "TCD19_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x130026++0x01 line.word 0x00 "TCD19_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x130028++0x03 line.long 0x00 "TCD19_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x130028++0x03 line.long 0x00 "TCD19_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x13002C++0x03 line.long 0x00 "TCD19_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x130030++0x03 line.long 0x00 "TCD19_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x130034++0x01 line.word 0x00 "TCD19_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x130036++0x01 line.word 0x00 "TCD19_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x130036++0x01 line.word 0x00 "TCD19_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x130038++0x03 line.long 0x00 "TCD19_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x13003C++0x01 line.word 0x00 "TCD19_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x13003E++0x01 line.word 0x00 "TCD19_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x13003E++0x01 line.word 0x00 "TCD19_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x140000++0x03 line.long 0x00 "CH20_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x140004++0x03 line.long 0x00 "CH20_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x140008++0x03 line.long 0x00 "CH20_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x14000C++0x03 line.long 0x00 "CH20_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x140010++0x03 line.long 0x00 "CH20_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x140014++0x03 line.long 0x00 "CH20_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x140020++0x03 line.long 0x00 "TCD20_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x140024++0x01 line.word 0x00 "TCD20_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x140026++0x01 line.word 0x00 "TCD20_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x140028++0x03 line.long 0x00 "TCD20_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x140028++0x03 line.long 0x00 "TCD20_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x14002C++0x03 line.long 0x00 "TCD20_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x140030++0x03 line.long 0x00 "TCD20_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x140034++0x01 line.word 0x00 "TCD20_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x140036++0x01 line.word 0x00 "TCD20_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x140036++0x01 line.word 0x00 "TCD20_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x140038++0x03 line.long 0x00 "TCD20_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x14003C++0x01 line.word 0x00 "TCD20_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x14003E++0x01 line.word 0x00 "TCD20_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x14003E++0x01 line.word 0x00 "TCD20_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x150000++0x03 line.long 0x00 "CH21_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x150004++0x03 line.long 0x00 "CH21_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x150008++0x03 line.long 0x00 "CH21_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x15000C++0x03 line.long 0x00 "CH21_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x150010++0x03 line.long 0x00 "CH21_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x150014++0x03 line.long 0x00 "CH21_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x150020++0x03 line.long 0x00 "TCD21_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x150024++0x01 line.word 0x00 "TCD21_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x150026++0x01 line.word 0x00 "TCD21_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x150028++0x03 line.long 0x00 "TCD21_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x150028++0x03 line.long 0x00 "TCD21_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x15002C++0x03 line.long 0x00 "TCD21_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x150030++0x03 line.long 0x00 "TCD21_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x150034++0x01 line.word 0x00 "TCD21_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x150036++0x01 line.word 0x00 "TCD21_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x150036++0x01 line.word 0x00 "TCD21_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x150038++0x03 line.long 0x00 "TCD21_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x15003C++0x01 line.word 0x00 "TCD21_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x15003E++0x01 line.word 0x00 "TCD21_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x15003E++0x01 line.word 0x00 "TCD21_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x160000++0x03 line.long 0x00 "CH22_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x160004++0x03 line.long 0x00 "CH22_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x160008++0x03 line.long 0x00 "CH22_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x16000C++0x03 line.long 0x00 "CH22_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x160010++0x03 line.long 0x00 "CH22_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x160014++0x03 line.long 0x00 "CH22_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x160020++0x03 line.long 0x00 "TCD22_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x160024++0x01 line.word 0x00 "TCD22_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x160026++0x01 line.word 0x00 "TCD22_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x160028++0x03 line.long 0x00 "TCD22_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x160028++0x03 line.long 0x00 "TCD22_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x16002C++0x03 line.long 0x00 "TCD22_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x160030++0x03 line.long 0x00 "TCD22_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x160034++0x01 line.word 0x00 "TCD22_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x160036++0x01 line.word 0x00 "TCD22_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x160036++0x01 line.word 0x00 "TCD22_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x160038++0x03 line.long 0x00 "TCD22_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x16003C++0x01 line.word 0x00 "TCD22_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x16003E++0x01 line.word 0x00 "TCD22_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x16003E++0x01 line.word 0x00 "TCD22_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x170000++0x03 line.long 0x00 "CH23_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x170004++0x03 line.long 0x00 "CH23_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x170008++0x03 line.long 0x00 "CH23_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x17000C++0x03 line.long 0x00 "CH23_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x170010++0x03 line.long 0x00 "CH23_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x170014++0x03 line.long 0x00 "CH23_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x170020++0x03 line.long 0x00 "TCD23_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x170024++0x01 line.word 0x00 "TCD23_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x170026++0x01 line.word 0x00 "TCD23_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x170028++0x03 line.long 0x00 "TCD23_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x170028++0x03 line.long 0x00 "TCD23_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x17002C++0x03 line.long 0x00 "TCD23_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x170030++0x03 line.long 0x00 "TCD23_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x170034++0x01 line.word 0x00 "TCD23_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x170036++0x01 line.word 0x00 "TCD23_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x170036++0x01 line.word 0x00 "TCD23_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x170038++0x03 line.long 0x00 "TCD23_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x17003C++0x01 line.word 0x00 "TCD23_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x17003E++0x01 line.word 0x00 "TCD23_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x17003E++0x01 line.word 0x00 "TCD23_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x180000++0x03 line.long 0x00 "CH24_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x180004++0x03 line.long 0x00 "CH24_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x180008++0x03 line.long 0x00 "CH24_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x18000C++0x03 line.long 0x00 "CH24_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x180010++0x03 line.long 0x00 "CH24_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x180014++0x03 line.long 0x00 "CH24_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x180020++0x03 line.long 0x00 "TCD24_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x180024++0x01 line.word 0x00 "TCD24_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x180026++0x01 line.word 0x00 "TCD24_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x180028++0x03 line.long 0x00 "TCD24_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x180028++0x03 line.long 0x00 "TCD24_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x18002C++0x03 line.long 0x00 "TCD24_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x180030++0x03 line.long 0x00 "TCD24_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x180034++0x01 line.word 0x00 "TCD24_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x180036++0x01 line.word 0x00 "TCD24_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x180036++0x01 line.word 0x00 "TCD24_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x180038++0x03 line.long 0x00 "TCD24_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x18003C++0x01 line.word 0x00 "TCD24_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x18003E++0x01 line.word 0x00 "TCD24_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x18003E++0x01 line.word 0x00 "TCD24_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x190000++0x03 line.long 0x00 "CH25_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x190004++0x03 line.long 0x00 "CH25_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x190008++0x03 line.long 0x00 "CH25_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x19000C++0x03 line.long 0x00 "CH25_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x190010++0x03 line.long 0x00 "CH25_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x190014++0x03 line.long 0x00 "CH25_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x190020++0x03 line.long 0x00 "TCD25_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x190024++0x01 line.word 0x00 "TCD25_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x190026++0x01 line.word 0x00 "TCD25_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x190028++0x03 line.long 0x00 "TCD25_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x190028++0x03 line.long 0x00 "TCD25_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x19002C++0x03 line.long 0x00 "TCD25_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x190030++0x03 line.long 0x00 "TCD25_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x190034++0x01 line.word 0x00 "TCD25_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x190036++0x01 line.word 0x00 "TCD25_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x190036++0x01 line.word 0x00 "TCD25_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x190038++0x03 line.long 0x00 "TCD25_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x19003C++0x01 line.word 0x00 "TCD25_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x19003E++0x01 line.word 0x00 "TCD25_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x19003E++0x01 line.word 0x00 "TCD25_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1A0000++0x03 line.long 0x00 "CH26_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1A0004++0x03 line.long 0x00 "CH26_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1A0008++0x03 line.long 0x00 "CH26_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1A000C++0x03 line.long 0x00 "CH26_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1A0010++0x03 line.long 0x00 "CH26_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1A0014++0x03 line.long 0x00 "CH26_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1A0020++0x03 line.long 0x00 "TCD26_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1A0024++0x01 line.word 0x00 "TCD26_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1A0026++0x01 line.word 0x00 "TCD26_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1A0028++0x03 line.long 0x00 "TCD26_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A0028++0x03 line.long 0x00 "TCD26_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1A002C++0x03 line.long 0x00 "TCD26_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1A0030++0x03 line.long 0x00 "TCD26_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1A0034++0x01 line.word 0x00 "TCD26_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1A0036++0x01 line.word 0x00 "TCD26_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1A0036++0x01 line.word 0x00 "TCD26_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1A0038++0x03 line.long 0x00 "TCD26_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1A003C++0x01 line.word 0x00 "TCD26_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1A003E++0x01 line.word 0x00 "TCD26_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1A003E++0x01 line.word 0x00 "TCD26_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1B0000++0x03 line.long 0x00 "CH27_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1B0004++0x03 line.long 0x00 "CH27_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1B0008++0x03 line.long 0x00 "CH27_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1B000C++0x03 line.long 0x00 "CH27_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1B0010++0x03 line.long 0x00 "CH27_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1B0014++0x03 line.long 0x00 "CH27_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1B0020++0x03 line.long 0x00 "TCD27_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1B0024++0x01 line.word 0x00 "TCD27_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1B0026++0x01 line.word 0x00 "TCD27_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1B0028++0x03 line.long 0x00 "TCD27_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B0028++0x03 line.long 0x00 "TCD27_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1B002C++0x03 line.long 0x00 "TCD27_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1B0030++0x03 line.long 0x00 "TCD27_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1B0034++0x01 line.word 0x00 "TCD27_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1B0036++0x01 line.word 0x00 "TCD27_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1B0036++0x01 line.word 0x00 "TCD27_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1B0038++0x03 line.long 0x00 "TCD27_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1B003C++0x01 line.word 0x00 "TCD27_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1B003E++0x01 line.word 0x00 "TCD27_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1B003E++0x01 line.word 0x00 "TCD27_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1C0000++0x03 line.long 0x00 "CH28_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1C0004++0x03 line.long 0x00 "CH28_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1C0008++0x03 line.long 0x00 "CH28_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1C000C++0x03 line.long 0x00 "CH28_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1C0010++0x03 line.long 0x00 "CH28_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1C0014++0x03 line.long 0x00 "CH28_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1C0020++0x03 line.long 0x00 "TCD28_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1C0024++0x01 line.word 0x00 "TCD28_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1C0026++0x01 line.word 0x00 "TCD28_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1C0028++0x03 line.long 0x00 "TCD28_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C0028++0x03 line.long 0x00 "TCD28_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1C002C++0x03 line.long 0x00 "TCD28_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1C0030++0x03 line.long 0x00 "TCD28_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1C0034++0x01 line.word 0x00 "TCD28_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1C0036++0x01 line.word 0x00 "TCD28_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1C0036++0x01 line.word 0x00 "TCD28_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1C0038++0x03 line.long 0x00 "TCD28_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1C003C++0x01 line.word 0x00 "TCD28_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1C003E++0x01 line.word 0x00 "TCD28_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1C003E++0x01 line.word 0x00 "TCD28_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1D0000++0x03 line.long 0x00 "CH29_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1D0004++0x03 line.long 0x00 "CH29_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1D0008++0x03 line.long 0x00 "CH29_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1D000C++0x03 line.long 0x00 "CH29_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D0010++0x03 line.long 0x00 "CH29_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1D0014++0x03 line.long 0x00 "CH29_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1D0020++0x03 line.long 0x00 "TCD29_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1D0024++0x01 line.word 0x00 "TCD29_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1D0026++0x01 line.word 0x00 "TCD29_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1D0028++0x03 line.long 0x00 "TCD29_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D0028++0x03 line.long 0x00 "TCD29_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1D002C++0x03 line.long 0x00 "TCD29_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1D0030++0x03 line.long 0x00 "TCD29_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1D0034++0x01 line.word 0x00 "TCD29_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1D0036++0x01 line.word 0x00 "TCD29_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1D0036++0x01 line.word 0x00 "TCD29_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1D0038++0x03 line.long 0x00 "TCD29_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1D003C++0x01 line.word 0x00 "TCD29_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1D003E++0x01 line.word 0x00 "TCD29_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1D003E++0x01 line.word 0x00 "TCD29_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1E0000++0x03 line.long 0x00 "CH30_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1E0004++0x03 line.long 0x00 "CH30_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1E0008++0x03 line.long 0x00 "CH30_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1E000C++0x03 line.long 0x00 "CH30_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1E0010++0x03 line.long 0x00 "CH30_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1E0014++0x03 line.long 0x00 "CH30_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1E0020++0x03 line.long 0x00 "TCD30_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1E0024++0x01 line.word 0x00 "TCD30_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1E0026++0x01 line.word 0x00 "TCD30_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1E0028++0x03 line.long 0x00 "TCD30_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E0028++0x03 line.long 0x00 "TCD30_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1E002C++0x03 line.long 0x00 "TCD30_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1E0030++0x03 line.long 0x00 "TCD30_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1E0034++0x01 line.word 0x00 "TCD30_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1E0036++0x01 line.word 0x00 "TCD30_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1E0036++0x01 line.word 0x00 "TCD30_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1E0038++0x03 line.long 0x00 "TCD30_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1E003C++0x01 line.word 0x00 "TCD30_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1E003E++0x01 line.word 0x00 "TCD30_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1E003E++0x01 line.word 0x00 "TCD30_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" group.long 0x1F0000++0x03 line.long 0x00 "CH31_CSR,Channel Control and Status" rbitfld.long 0x00 31. "ACTIVE,Channel Active" "0,1" eventfld.long 0x00 30. "DONE,Channel Done" "0,1" newline bitfld.long 0x00 3. "EBW,Enable Buffered Writes" "0: Buffered writes on system bus disabled,1: Buffered writes on system bus enabled" bitfld.long 0x00 2. "EEI,Enable Error Interrupt" "0: Error signal for corresponding channel does..,1: Assertion of error signal for corresponding.." newline bitfld.long 0x00 1. "EARQ,Enable Asynchronous DMA Request In Stop Mode For Channel" "0: Disable asynchronous DMA request for the..,1: Enable asynchronous DMA request for the channel" bitfld.long 0x00 0. "ERQ,Enable DMA Request" "0: DMA hardware request signal for corresponding..,1: DMA hardware request signal for corresponding.." group.long 0x1F0004++0x03 line.long 0x00 "CH31_ES,Channel Error Status" eventfld.long 0x00 31. "ERR,Error In Channel" "0: An error in this channel has not occurred,1: An error in this channel has occurred" rbitfld.long 0x00 7. "SAE,Source Address Error" "0: No source address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 6. "SOE,Source Offset Error" "0: No source offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 5. "DAE,Destination Address Error" "0: No destination address configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 4. "DOE,Destination Offset Error" "0: No destination offset configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 3. "NCE,NBYTES/CITER Configuration Error" "0: No NBYTES/CITER configuration error,1: Last recorded error was a configuration error.." newline rbitfld.long 0x00 2. "SGE,Scatter/Gather Configuration Error" "0: No scatter/gather configuration error,1: Last recorded error was a configuration error.." rbitfld.long 0x00 1. "SBE,Source Bus Error" "0: No source bus error,1: Last recorded error was bus error on source" newline rbitfld.long 0x00 0. "DBE,Destination Bus Error" "0: No destination bus error,1: Last recorded error was bus error on.." group.long 0x1F0008++0x03 line.long 0x00 "CH31_INT,Channel Interrupt Status" eventfld.long 0x00 0. "INT,Interrupt Request" "0: Interrupt request for corresponding channel..,1: Interrupt request for corresponding channel.." group.long 0x1F000C++0x03 line.long 0x00 "CH31_SBR,Channel System Bus" bitfld.long 0x00 17.--20. "ATTR,Attribute Output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "EMI,Enable Master ID Replication" "0: Master ID replication is disabled,1: Master ID replication is enabled" newline bitfld.long 0x00 15. "PAL,Privileged Access Level" "0: User protection level for DMA transfers,1: Privileged protection level for DMA transfers" bitfld.long 0x00 14. "SEC,Security Level" "0: Nonsecure protection level for DMA transfers,1: Secure protection level for DMA transfers" newline rbitfld.long 0x00 0.--5. "MID,Master ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1F0010++0x03 line.long 0x00 "CH31_PRI,Channel Priority" bitfld.long 0x00 31. "ECP,Enable Channel Preemption" "0: Channel cannot be suspended by a..,1: Channel can be temporarily suspended by a.." bitfld.long 0x00 30. "DPA,Disable Preempt Ability" "0: Channel can suspend a lower-priority channel,1: Channel cannot suspend any other channel.." newline bitfld.long 0x00 0.--2. "APL,Arbitration Priority Level" "0,1,2,3,4,5,6,7" group.long 0x1F0014++0x03 line.long 0x00 "CH31_MUX,Channel Multiplexor Configuration" hexmask.long.byte 0x00 0.--6. 1. "SRC,Service Request Source" group.long 0x1F0020++0x03 line.long 0x00 "TCD31_SADDR,TCD Source Address" hexmask.long 0x00 0.--31. 1. "SADDR,Source Address" group.word 0x1F0024++0x01 line.word 0x00 "TCD31_SOFF,TCD Signed Source Address Offset" hexmask.word 0x00 0.--15. 1. "SOFF,Source Address Signed Offset" group.word 0x1F0026++0x01 line.word 0x00 "TCD31_ATTR,TCD Transfer Attributes" bitfld.word 0x00 11.--15. "SMOD,Source Address Modulo" "0: Source address modulo feature disabled,1: Source address modulo feature enabled for any..,?..." bitfld.word 0x00 8.--10. "SSIZE,Source Data Transfer Size" "0: EIGHT_BIT,1: SIXTEEN_BIT,2: THIRTYTWO_BIT,3: SIXTYFOUR_BIT,4: SIXTEEN_BYTE,5: THIRTYTWO_BYTE,6: SIXTYFOUR_BYTE,?..." newline bitfld.word 0x00 3.--7. "DMOD,Destination Address Modulo" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 0.--2. "DSIZE,Destination Data Transfer Size" "0,1,2,3,4,5,6,7" group.long 0x1F0028++0x03 line.long 0x00 "TCD31_NBYTES_MLOFFNO,TCD Transfer Size Without Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long 0x00 0.--29. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1F0028++0x03 line.long 0x00 "TCD31_NBYTES_MLOFFYES,TCD Transfer Size with Minor Loop Offsets" bitfld.long 0x00 31. "SMLOE,Source Minor Loop Offset Enable" "0: Minor loop offset not applied to SADDR,1: Minor loop offset applied to SADDR" bitfld.long 0x00 30. "DMLOE,Destination Minor Loop Offset Enable" "0: Minor loop offset not applied to DADDR,1: Minor loop offset applied to DADDR" newline hexmask.long.tbyte 0x00 10.--29. 1. "MLOFF,Minor Loop Offset" hexmask.long.word 0x00 0.--9. 1. "NBYTES,Number of Bytes To Transfer Per Service Request" group.long 0x1F002C++0x03 line.long 0x00 "TCD31_SLAST_SDA,TCD Last Source Address Adjustment / Store DADDR Address" hexmask.long 0x00 0.--31. 1. "SLAST_SDA,Last Source Address Adjustment / Store DADDR Address" group.long 0x1F0030++0x03 line.long 0x00 "TCD31_DADDR,TCD Destination Address" hexmask.long 0x00 0.--31. 1. "DADDR,Destination Address" group.word 0x1F0034++0x01 line.word 0x00 "TCD31_DOFF,TCD Signed Destination Address Offset" hexmask.word 0x00 0.--15. 1. "DOFF,Destination Address Signed Offset" group.word 0x1F0036++0x01 line.word 0x00 "TCD31_CITER_ELINKNO,TCD Current Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "CITER,Current Major Iteration Count" group.word 0x1F0036++0x01 line.word 0x00 "TCD31_CITER_ELINKYES,TCD Current Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Minor Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "CITER,Current Major Iteration Count" group.long 0x1F0038++0x03 line.long 0x00 "TCD31_DLAST_SGA,TCD Last Destination Address Adjustment / Scatter Gather Address" hexmask.long 0x00 0.--31. 1. "DLAST_SGA,Last Destination Address Adjustment / Scatter Gather Address" group.word 0x1F003C++0x01 line.word 0x00 "TCD31_CSR,TCD Control and Status" bitfld.word 0x00 14.--15. "BWC,Bandwidth Control" "0: No eDMA engine stalls,?,2: eDMA engine stalls for 4 cycles after each R/W,3: eDMA engine stalls for 8 cycles after each R/W" bitfld.word 0x00 8.--12. "MAJORLINKCH,Major Loop Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.word 0x00 7. "ESDA,Enable Store Destination Address" "0: Ability to store destination address to..,1: Ability to store destination address to.." bitfld.word 0x00 6. "EEOP,Enable End-Of-Packet Processing" "0: End-of-packet operation disabled,1: End-of-packet hardware input signal enabled" newline bitfld.word 0x00 5. "MAJORELINK,Enable Link When Major Loop Complete" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 4. "ESG,Enable Scatter/Gather Processing" "0: Current channel's TCD is normal format,1: Current channel's TCD specifies.." newline bitfld.word 0x00 3. "DREQ,Disable Request" "0: CHANNEL_NOT_AFFECTED,1: Clear the ERQ field to 0 upon major loop.." bitfld.word 0x00 2. "INTHALF,Enable Interrupt If Major Counter Half-complete" "0: Halfway point interrupt disabled,1: Halfway point interrupt enabled" newline bitfld.word 0x00 1. "INTMAJOR,Enable Interrupt If Major count complete" "0: End-of-major loop interrupt disabled,1: End-of-major loop interrupt enabled" bitfld.word 0x00 0. "START,Channel Start" "0: Channel not explicitly started,1: Channel explicitly started via a.." group.word 0x1F003E++0x01 line.word 0x00 "TCD31_BITER_ELINKNO,TCD Beginning Major Loop Count (Minor Loop Channel Linking Disabled)" bitfld.word 0x00 15. "ELINK,Enables Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" hexmask.word 0x00 0.--14. 1. "BITER,Starting Major Iteration Count" group.word 0x1F003E++0x01 line.word 0x00 "TCD31_BITER_ELINKYES,TCD Beginning Major Loop Count (Minor Loop Channel Linking Enabled)" bitfld.word 0x00 15. "ELINK,Enable Link" "0: Channel-to-channel linking disabled,1: Channel-to-channel linking enabled" bitfld.word 0x00 9.--13. "LINKCH,Link Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.word 0x00 0.--8. 1. "BITER,Starting Major Iteration Count" tree.end tree "ENET (Ethernet MAC)" base ad:0x29950000 group.long 0x04++0x03 line.long 0x00 "EIR,Interrupt Event Register" eventfld.long 0x00 30. "BABR,Babbling Receive Error" "0,1" eventfld.long 0x00 29. "BABT,Babbling Transmit Error" "0,1" newline eventfld.long 0x00 28. "GRA,Graceful Stop Complete" "0,1" eventfld.long 0x00 27. "TXF,Transmit Frame Interrupt" "0,1" newline eventfld.long 0x00 26. "TXB,Transmit Buffer Interrupt" "0,1" eventfld.long 0x00 25. "RXF,Receive Frame Interrupt" "0,1" newline eventfld.long 0x00 24. "RXB,Receive Buffer Interrupt" "0,1" eventfld.long 0x00 23. "MII,MII Interrupt" "0,1" newline eventfld.long 0x00 22. "EBERR,Ethernet Bus Error" "0,1" eventfld.long 0x00 21. "LC,Late Collision" "0,1" newline eventfld.long 0x00 20. "RL,Collision Retry Limit" "0,1" eventfld.long 0x00 19. "UN,Transmit FIFO Underrun" "0,1" newline eventfld.long 0x00 18. "PLR,Payload Receive Error" "0,1" eventfld.long 0x00 17. "WAKEUP,Node Wakeup Request Indication" "0,1" newline eventfld.long 0x00 16. "TS_AVAIL,Transmit Timestamp Available" "0,1" eventfld.long 0x00 15. "TS_TIMER,Timestamp Timer" "0,1" group.long 0x08++0x03 line.long 0x00 "EIMR,Interrupt Mask Register" bitfld.long 0x00 30. "BABR,BABR Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 29. "BABT,BABT Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 28. "GRA,GRA Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 27. "TXF,TXF Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 26. "TXB,TXB Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 25. "RXF,RXF Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 24. "RXB,RXB Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 23. "MII,MII Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 22. "EBERR,EBERR Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 21. "LC,LC Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 20. "RL,RL Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 19. "UN,UN Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 18. "PLR,PLR Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 17. "WAKEUP,WAKEUP Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." newline bitfld.long 0x00 16. "TS_AVAIL,TS_AVAIL Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." bitfld.long 0x00 15. "TS_TIMER,TS_TIMER Interrupt Mask" "0: The corresponding interrupt source is masked,1: The corresponding interrupt source is not.." group.long 0x10++0x03 line.long 0x00 "RDAR,Receive Descriptor Active Register - Ring 0" bitfld.long 0x00 24. "RDAR,Receive Descriptor Active" "0,1" group.long 0x14++0x03 line.long 0x00 "TDAR,Transmit Descriptor Active Register - Ring 0" bitfld.long 0x00 24. "TDAR,Transmit Descriptor Active" "0,1" group.long 0x24++0x03 line.long 0x00 "ECR,Ethernet Control Register" bitfld.long 0x00 8. "DBSWP,Descriptor Byte Swapping Enable" "0: The buffer descriptor bytes are not swapped..,1: The buffer descriptor bytes are swapped to.." bitfld.long 0x00 7. "STOPEN,STOPEN Signal Control" "0,1" newline bitfld.long 0x00 6. "DBGEN,Debug Enable" "0: MAC continues operation in debug mode,1: MAC enters hardware freeze mode when the.." bitfld.long 0x00 4. "EN1588,EN1588 Enable" "0: Legacy FEC buffer descriptors and functions..,1: Enhanced frame time-stamping functions enabled" newline bitfld.long 0x00 3. "SLEEP,Sleep Mode Enable" "0: Normal operating mode,1: Sleep mode" bitfld.long 0x00 2. "MAGICEN,Magic Packet Detection Enable" "0: Magic detection logic disabled,1: The MAC core detects magic packets and.." newline bitfld.long 0x00 1. "ETHEREN,Ethernet Enable" "0: Reception immediately stops and transmission..,1: MAC is enabled and reception and transmission.." bitfld.long 0x00 0. "RESET,Ethernet MAC Reset" "0,1" group.long 0x40++0x03 line.long 0x00 "MMFR,MII Management Frame Register" bitfld.long 0x00 30.--31. "ST,Start Of Frame Delimiter" "0,1,2,3" bitfld.long 0x00 28.--29. "OP,Operation Code" "0,1,2,3" newline bitfld.long 0x00 23.--27. "PA,PHY Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 18.--22. "RA,Register Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 16.--17. "TA,Turn Around" "0,1,2,3" hexmask.long.word 0x00 0.--15. 1. "DATA,Management Frame Data" group.long 0x44++0x03 line.long 0x00 "MSCR,MII Speed Control Register" bitfld.long 0x00 8.--10. "HOLDTIME,Hold time On MDIO Output" "0: 1 internal module clock cycle,1: 2 internal module clock cycles,2: 3 internal module clock cycles,?,?,?,?,7: 8 internal module clock cycles" bitfld.long 0x00 7. "DIS_PRE,Disable Preamble" "0: Preamble enabled,1: Preamble (32 ones) is not prepended to the.." newline bitfld.long 0x00 1.--6. "MII_SPEED,MII Speed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x64++0x03 line.long 0x00 "MIBC,MIB Control Register" bitfld.long 0x00 31. "MIB_DIS,Disable MIB Logic" "0: MIB logic is enabled,1: MIB logic is disabled" rbitfld.long 0x00 30. "MIB_IDLE,MIB Idle" "0: The MIB block is updating MIB counters,1: The MIB block is not currently updating any.." newline bitfld.long 0x00 29. "MIB_CLEAR,MIB Clear" "0: See note above,1: All statistics counters are reset to 0" group.long 0x84++0x03 line.long 0x00 "RCR,Receive Control Register" rbitfld.long 0x00 31. "GRS,Graceful Receive Stopped" "0: Receive not stopped,1: Receive stopped" bitfld.long 0x00 30. "NLC,Payload Length Check Disable" "0: The payload length check is disabled,1: The core checks the frame's payload length.." newline hexmask.long.word 0x00 16.--29. 1. "MAX_FL,Maximum Frame Length" bitfld.long 0x00 15. "CFEN,MAC Control Frame Enable" "0: MAC control frames with any opcode other than..,1: MAC control frames with any opcode other than.." newline bitfld.long 0x00 14. "CRCFWD,Terminate/Forward Received CRC" "0: The CRC field of received frames is..,1: The CRC field is stripped from the frame" bitfld.long 0x00 13. "PAUFWD,Terminate/Forward Pause Frames" "0: Pause frames are terminated and discarded in..,1: Pause frames are forwarded to the user.." newline bitfld.long 0x00 12. "PADEN,Enable Frame Padding Remove On Receive" "0: No padding is removed on receive by the MAC,1: Padding is removed from received frames" bitfld.long 0x00 9. "RMII_10T,Enables 10-Mbit/s mode of the RMII" "0: 100-Mbit/s operation,1: 10-Mbit/s operation" newline bitfld.long 0x00 8. "RMII_MODE,RMII Mode Enable" "0: MAC configured for MII mode,1: MAC configured for RMII operation" bitfld.long 0x00 5. "FCE,Flow Control Enable" "0: Disable flow control,1: Enable flow control" newline bitfld.long 0x00 4. "BC_REJ,Broadcast Frame Reject" "0: Will not reject frames as described above,1: Will reject frames as described above" bitfld.long 0x00 3. "PROM,Promiscuous Mode" "0: Disabled,1: Enabled" newline bitfld.long 0x00 2. "MII_MODE,Media Independent Interface Mode" "?,1: MII or RMII mode as indicated by the.." bitfld.long 0x00 1. "DRT,Disable Receive On Transmit" "0: Receive path operates independently of..,1: Disable reception of frames while transmitting" newline bitfld.long 0x00 0. "LOOP,Internal Loopback" "0: Loopback disabled,1: Transmitted frames are looped back internal.." group.long 0xC4++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 9. "CRCFWD,Forward Frame From Application With CRC" "0: TxBD[TC] controls whether the frame has a CRC..,1: The transmitter does not append any CRC to.." bitfld.long 0x00 8. "ADDINS,Set MAC Address On Transmit" "0: The source MAC address is not modified by the..,1: The MAC overwrites the source MAC address.." newline bitfld.long 0x00 5.--7. "ADDSEL,Source MAC Address Select On Transmit" "0: Node MAC address programmed on PADDR1/2..,?..." rbitfld.long 0x00 4. "RFC_PAUSE,Receive Frame Control Pause" "0,1" newline bitfld.long 0x00 3. "TFC_PAUSE,Transmit Frame Control Pause" "0: No PAUSE frame transmitted,1: The MAC stops transmission of data frames.." bitfld.long 0x00 2. "FDEN,Full-Duplex Enable" "0: Disable full-duplex,1: Enable full-duplex" newline bitfld.long 0x00 0. "GTS,Graceful Transmit Stop" "0: Disable graceful transmit stop,1: Enable graceful transmit stop" group.long 0xE4++0x03 line.long 0x00 "PALR,Physical Address Lower Register" hexmask.long 0x00 0.--31. 1. "PADDR1,Pause Address" group.long 0xE8++0x03 line.long 0x00 "PAUR,Physical Address Upper Register" hexmask.long.word 0x00 16.--31. 1. "PADDR2,Bytes 4 (bits 31:24) and 5 (bits 23:16) of the 6-byte individual address used for exact match and the source address field in PAUSE frames" hexmask.long.word 0x00 0.--15. 1. "TYPE,Type Field In PAUSE Frames" group.long 0xEC++0x03 line.long 0x00 "OPD,Opcode/Pause Duration Register" hexmask.long.word 0x00 16.--31. 1. "OPCODE,Opcode Field In PAUSE Frames" hexmask.long.word 0x00 0.--15. 1. "PAUSE_DUR,Pause Duration" group.long 0xF0++0x03 line.long 0x00 "TXIC0,Transmit Interrupt Coalescing Register" bitfld.long 0x00 31. "ICEN,Interrupt Coalescing Enable" "0: Disable Interrupt coalescing,1: Enable Interrupt coalescing" bitfld.long 0x00 30. "ICCS,Interrupt Coalescing Timer Clock Source Select" "0: Use MII/GMII TX clocks,1: Use ENET system clock" newline hexmask.long.byte 0x00 20.--27. 1. "ICFT,Interrupt coalescing frame count threshold" hexmask.long.word 0x00 0.--15. 1. "ICTT,Interrupt coalescing timer threshold" group.long 0x100++0x03 line.long 0x00 "RXIC0,Receive Interrupt Coalescing Register" bitfld.long 0x00 31. "ICEN,Interrupt Coalescing Enable" "0: Disable Interrupt coalescing,1: Enable Interrupt coalescing" bitfld.long 0x00 30. "ICCS,Interrupt Coalescing Timer Clock Source Select" "0: Use MII/GMII TX clocks,1: Use ENET system clock" newline hexmask.long.byte 0x00 20.--27. 1. "ICFT,Interrupt coalescing frame count threshold" hexmask.long.word 0x00 0.--15. 1. "ICTT,Interrupt coalescing timer threshold" group.long 0x118++0x03 line.long 0x00 "IAUR,Descriptor Individual Upper Address Register" hexmask.long 0x00 0.--31. 1. "IADDR1,Contains the upper 32 bits of the 64-bit hash table used in the address recognition process for receive frames with a unicast address" group.long 0x11C++0x03 line.long 0x00 "IALR,Descriptor Individual Lower Address Register" hexmask.long 0x00 0.--31. 1. "IADDR2,Contains the lower 32 bits of the 64-bit hash table used in the address recognition process for receive frames with a unicast address" group.long 0x120++0x03 line.long 0x00 "GAUR,Descriptor Group Upper Address Register" hexmask.long 0x00 0.--31. 1. "GADDR1,Contains the upper 32 bits of the 64-bit hash table used in the address recognition process for receive frames with a multicast address" group.long 0x124++0x03 line.long 0x00 "GALR,Descriptor Group Lower Address Register" hexmask.long 0x00 0.--31. 1. "GADDR2,Contains the lower 32 bits of the 64-bit hash table used in the address recognition process for receive frames with a multicast address" group.long 0x144++0x03 line.long 0x00 "TFWR,Transmit FIFO Watermark Register" bitfld.long 0x00 8. "STRFWD,Store And Forward Enable" "0: Reset,1: Enabled" bitfld.long 0x00 0.--5. "TFWR,Transmit FIFO" "0: 64 bytes written,1: 64 bytes written,2: 128 bytes written,3: 192 bytes written,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: 1984 bytes written,?..." group.long 0x180++0x03 line.long 0x00 "RDSR,Receive Descriptor Ring 0 Start Register" hexmask.long 0x00 3.--31. 1. "R_DES_START,Pointer to the beginning of the receive buffer descriptor queue" group.long 0x184++0x03 line.long 0x00 "TDSR,Transmit Buffer Descriptor Ring 0 Start Register" hexmask.long 0x00 3.--31. 1. "X_DES_START,Pointer to the beginning of the transmit buffer descriptor queue" group.long 0x188++0x03 line.long 0x00 "MRBR,Maximum Receive Buffer Size Register - Ring 0" hexmask.long.word 0x00 4.--13. 1. "R_BUF_SIZE,Receive buffer size in bytes" group.long 0x190++0x03 line.long 0x00 "RSFL,Receive FIFO Section Full Threshold" hexmask.long.byte 0x00 0.--7. 1. "RX_SECTION_FULL,Value Of Receive FIFO Section Full Threshold" group.long 0x194++0x03 line.long 0x00 "RSEM,Receive FIFO Section Empty Threshold" bitfld.long 0x00 16.--20. "STAT_SECTION_EMPTY,RX Status FIFO Section Empty Threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.byte 0x00 0.--7. 1. "RX_SECTION_EMPTY,Value Of The Receive FIFO Section Empty Threshold" group.long 0x198++0x03 line.long 0x00 "RAEM,Receive FIFO Almost Empty Threshold" hexmask.long.byte 0x00 0.--7. 1. "RX_ALMOST_EMPTY,Value Of The Receive FIFO Almost Empty Threshold" group.long 0x19C++0x03 line.long 0x00 "RAFL,Receive FIFO Almost Full Threshold" hexmask.long.byte 0x00 0.--7. 1. "RX_ALMOST_FULL,Value Of The Receive FIFO Almost Full Threshold" group.long 0x1A0++0x03 line.long 0x00 "TSEM,Transmit FIFO Section Empty Threshold" hexmask.long.byte 0x00 0.--7. 1. "TX_SECTION_EMPTY,Value Of The Transmit FIFO Section Empty Threshold" group.long 0x1A4++0x03 line.long 0x00 "TAEM,Transmit FIFO Almost Empty Threshold" hexmask.long.byte 0x00 0.--7. 1. "TX_ALMOST_EMPTY,Value of Transmit FIFO Almost Empty Threshold" group.long 0x1A8++0x03 line.long 0x00 "TAFL,Transmit FIFO Almost Full Threshold" hexmask.long.byte 0x00 0.--7. 1. "TX_ALMOST_FULL,Value Of The Transmit FIFO Almost Full Threshold" group.long 0x1AC++0x03 line.long 0x00 "TIPG,Transmit Inter-Packet Gap" bitfld.long 0x00 0.--4. "IPG,Transmit Inter-Packet Gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x1B0++0x03 line.long 0x00 "FTRL,Frame Truncation Length" hexmask.long.word 0x00 0.--13. 1. "TRUNC_FL,Frame Truncation Length" group.long 0x1C0++0x03 line.long 0x00 "TACC,Transmit Accelerator Function Configuration" bitfld.long 0x00 4. "PROCHK,Enables insertion of protocol checksum" "0: Checksum not inserted,1: If an IP frame with a known protocol is.." bitfld.long 0x00 3. "IPCHK,Enables insertion of IP header checksum" "0: Checksum is not inserted,1: If an IP frame is transmitted the checksum is.." newline bitfld.long 0x00 0. "SHIFT16,TX FIFO Shift-16" "0: Disabled,1: Indicates to the transmit data FIFO that the.." group.long 0x1C4++0x03 line.long 0x00 "RACC,Receive Accelerator Function Configuration" bitfld.long 0x00 7. "SHIFT16,RX FIFO Shift-16" "0: Disabled,1: Instructs the MAC to write two additional.." bitfld.long 0x00 6. "LINEDIS,Enable Discard Of Frames With MAC Layer Errors" "0: Frames with errors are not discarded,1: Any frame received with a CRC length or PHY.." newline bitfld.long 0x00 2. "PRODIS,Enable Discard Of Frames With Wrong Protocol Checksum" "0: Frames with wrong checksum are not discarded,1: If a TCP/IP UDP/IP or ICMP/IP frame is.." bitfld.long 0x00 1. "IPDIS,Enable Discard Of Frames With Wrong IPv4 Header Checksum" "0: Frames with wrong IPv4 header checksum are..,1: If an IPv4 frame is received with a.." newline bitfld.long 0x00 0. "PADREM,Enable Padding Removal For Short IP Frames" "0: Padding not removed,1: Any bytes following the IP payload section of.." rgroup.long 0x204++0x03 line.long 0x00 "RMON_T_PACKETS,Tx Packet Count Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Packet count" rgroup.long 0x208++0x03 line.long 0x00 "RMON_T_BC_PKT,Tx Broadcast Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of broadcast packets" rgroup.long 0x20C++0x03 line.long 0x00 "RMON_T_MC_PKT,Tx Multicast Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of multicast packets" rgroup.long 0x210++0x03 line.long 0x00 "RMON_T_CRC_ALIGN,Tx Packets with CRC/Align Error Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of packets with CRC/align error" rgroup.long 0x214++0x03 line.long 0x00 "RMON_T_UNDERSIZE,Tx Packets Less Than Bytes and Good CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of transmit packets less than 64 bytes with good CRC" rgroup.long 0x218++0x03 line.long 0x00 "RMON_T_OVERSIZE,Tx Packets GT MAX_FL bytes and Good CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of transmit packets greater than MAX_FL bytes with good CRC" rgroup.long 0x21C++0x03 line.long 0x00 "RMON_T_FRAG,Tx Packets Less Than 64 Bytes and Bad CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of packets less than 64 bytes with bad CRC" rgroup.long 0x220++0x03 line.long 0x00 "RMON_T_JAB,Tx Packets Greater Than MAX_FL bytes and Bad CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of transmit packets greater than MAX_FL bytes and bad CRC" rgroup.long 0x224++0x03 line.long 0x00 "RMON_T_COL,Tx Collision Count Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of transmit collisions" rgroup.long 0x228++0x03 line.long 0x00 "RMON_T_P64,Tx 64-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of 64-byte transmit packets" rgroup.long 0x22C++0x03 line.long 0x00 "RMON_T_P65TO127,Tx 65- to 127-byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of 65- to 127-byte transmit packets" rgroup.long 0x230++0x03 line.long 0x00 "RMON_T_P128TO255,Tx 128- to 255-byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of 128- to 255-byte transmit packets" rgroup.long 0x234++0x03 line.long 0x00 "RMON_T_P256TO511,Tx 256- to 511-byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of 256- to 511-byte transmit packets" rgroup.long 0x238++0x03 line.long 0x00 "RMON_T_P512TO1023,Tx 512- to 1023-byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of 512- to 1023-byte transmit packets" rgroup.long 0x23C++0x03 line.long 0x00 "RMON_T_P1024TO2047,Tx 1024- to 2047-byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of 1024- to 2047-byte transmit packets" rgroup.long 0x240++0x03 line.long 0x00 "RMON_T_P_GTE2048,Tx Packets Greater Than 2048 Bytes Statistic Register" hexmask.long.word 0x00 0.--15. 1. "TXPKTS,Number of transmit packets greater than 2048 bytes" rgroup.long 0x244++0x03 line.long 0x00 "RMON_T_OCTETS,Tx Octets Statistic Register" hexmask.long 0x00 0.--31. 1. "TXOCTS,Number of transmit octets" rgroup.long 0x24C++0x03 line.long 0x00 "IEEE_T_FRAME_OK,Frames Transmitted OK Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted OK" rgroup.long 0x250++0x03 line.long 0x00 "IEEE_T_1COL,Frames Transmitted with Single Collision Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with one collision" rgroup.long 0x254++0x03 line.long 0x00 "IEEE_T_MCOL,Frames Transmitted with Multiple Collisions Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with multiple collisions" rgroup.long 0x258++0x03 line.long 0x00 "IEEE_T_DEF,Frames Transmitted after Deferral Delay Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with deferral delay" rgroup.long 0x25C++0x03 line.long 0x00 "IEEE_T_LCOL,Frames Transmitted with Late Collision Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with late collision" rgroup.long 0x260++0x03 line.long 0x00 "IEEE_T_EXCOL,Frames Transmitted with Excessive Collisions Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with excessive collisions" rgroup.long 0x264++0x03 line.long 0x00 "IEEE_T_MACERR,Frames Transmitted with Tx FIFO Underrun Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with transmit FIFO underrun" rgroup.long 0x268++0x03 line.long 0x00 "IEEE_T_CSERR,Frames Transmitted with Carrier Sense Error Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames transmitted with carrier sense error" rgroup.long 0x26C++0x03 line.long 0x00 "IEEE_T_SQE,Reserved Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,This read-only field is reserved and always has the value 0" rgroup.long 0x270++0x03 line.long 0x00 "IEEE_T_FDXFC,Flow Control Pause Frames Transmitted Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of flow-control pause frames transmitted" rgroup.long 0x274++0x03 line.long 0x00 "IEEE_T_OCTETS_OK,Octet Count for Frames Transmitted w/o Error Statistic Register" hexmask.long 0x00 0.--31. 1. "COUNT,Octet count for frames transmitted without error Counts total octets (includes header and FCS fields)" rgroup.long 0x284++0x03 line.long 0x00 "RMON_R_PACKETS,Rx Packet Count Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of packets received" rgroup.long 0x288++0x03 line.long 0x00 "RMON_R_BC_PKT,Rx Broadcast Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive broadcast packets" rgroup.long 0x28C++0x03 line.long 0x00 "RMON_R_MC_PKT,Rx Multicast Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive multicast packets" rgroup.long 0x290++0x03 line.long 0x00 "RMON_R_CRC_ALIGN,Rx Packets with CRC/Align Error Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive packets with CRC or align error" rgroup.long 0x294++0x03 line.long 0x00 "RMON_R_UNDERSIZE,Rx Packets with Less Than 64 Bytes and Good CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive packets with less than 64 bytes and good CRC" rgroup.long 0x298++0x03 line.long 0x00 "RMON_R_OVERSIZE,Rx Packets Greater Than MAX_FL and Good CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive packets greater than MAX_FL and good CRC" rgroup.long 0x29C++0x03 line.long 0x00 "RMON_R_FRAG,Rx Packets Less Than 64 Bytes and Bad CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive packets with less than 64 bytes and bad CRC" rgroup.long 0x2A0++0x03 line.long 0x00 "RMON_R_JAB,Rx Packets Greater Than MAX_FL Bytes and Bad CRC Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of receive packets greater than MAX_FL and bad CRC" rgroup.long 0x2A8++0x03 line.long 0x00 "RMON_R_P64,Rx 64-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of 64-byte receive packets" rgroup.long 0x2AC++0x03 line.long 0x00 "RMON_R_P65TO127,Rx 65- to 127-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of 65- to 127-byte recieve packets" rgroup.long 0x2B0++0x03 line.long 0x00 "RMON_R_P128TO255,Rx 128- to 255-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of 128- to 255-byte recieve packets" rgroup.long 0x2B4++0x03 line.long 0x00 "RMON_R_P256TO511,Rx 256- to 511-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of 256- to 511-byte recieve packets" rgroup.long 0x2B8++0x03 line.long 0x00 "RMON_R_P512TO1023,Rx 512- to 1023-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of 512- to 1023-byte recieve packets" rgroup.long 0x2BC++0x03 line.long 0x00 "RMON_R_P1024TO2047,Rx 1024- to 2047-Byte Packets Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of 1024- to 2047-byte recieve packets" rgroup.long 0x2C0++0x03 line.long 0x00 "RMON_R_P_GTE2048,Rx Packets Greater than 2048 Bytes Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of greater-than-2048-byte recieve packets" rgroup.long 0x2C4++0x03 line.long 0x00 "RMON_R_OCTETS,Rx Octets Statistic Register" hexmask.long 0x00 0.--31. 1. "COUNT,Number of receive octets" rgroup.long 0x2C8++0x03 line.long 0x00 "IEEE_R_DROP,Frames not Counted Correctly Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Frame count" rgroup.long 0x2CC++0x03 line.long 0x00 "IEEE_R_FRAME_OK,Frames Received OK Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames received OK" rgroup.long 0x2D0++0x03 line.long 0x00 "IEEE_R_CRC,Frames Received with CRC Error Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames received with CRC error" rgroup.long 0x2D4++0x03 line.long 0x00 "IEEE_R_ALIGN,Frames Received with Alignment Error Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of frames received with alignment error" rgroup.long 0x2D8++0x03 line.long 0x00 "IEEE_R_MACERR,Receive FIFO Overflow Count Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Receive FIFO overflow count" rgroup.long 0x2DC++0x03 line.long 0x00 "IEEE_R_FDXFC,Flow Control Pause Frames Received Statistic Register" hexmask.long.word 0x00 0.--15. 1. "COUNT,Number of flow-control pause frames received" rgroup.long 0x2E0++0x03 line.long 0x00 "IEEE_R_OCTETS_OK,Octet Count for Frames Received without Error Statistic Register" hexmask.long 0x00 0.--31. 1. "COUNT,Number of octets for frames received without error" group.long 0x400++0x03 line.long 0x00 "ATCR,Adjustable Timer Control Register" bitfld.long 0x00 13. "SLAVE,Enable Timer Slave Mode" "0: The timer is active and all configuration..,1: The internal timer is disabled and the.." bitfld.long 0x00 11. "CAPTURE,Capture Timer Value" "0: No effect,1: The current time is captured and can be read.." newline bitfld.long 0x00 9. "RESTART,Reset Timer" "0,1" bitfld.long 0x00 7. "PINPER,Enables event signal output external pin frc_evt_period assertion on period event" "0: Disable,1: Enable" newline bitfld.long 0x00 4. "PEREN,Enable Periodical Event" "0: Disable,1: A period event interrupt can be generated.." bitfld.long 0x00 3. "OFFRST,Reset Timer On Offset Event" "0: The timer is not affected and no action..,1: If OFFEN is set the timer resets to zero when.." newline bitfld.long 0x00 2. "OFFEN,Enable One-Shot Offset Event" "0: Disable,1: The timer can be reset to zero when the given.." bitfld.long 0x00 0. "EN,Enable Timer" "0: The timer stops at the current value,1: The timer starts incrementing" group.long 0x404++0x03 line.long 0x00 "ATVR,Timer Value Register" hexmask.long 0x00 0.--31. 1. "ATIME,A write sets the timer" group.long 0x408++0x03 line.long 0x00 "ATOFF,Timer Offset Register" hexmask.long 0x00 0.--31. 1. "OFFSET,Offset value for one-shot event generation" group.long 0x40C++0x03 line.long 0x00 "ATPER,Timer Period Register" hexmask.long 0x00 0.--31. 1. "PERIOD,Value for generating periodic events" group.long 0x410++0x03 line.long 0x00 "ATCOR,Timer Correction Register" hexmask.long 0x00 0.--30. 1. "COR,Correction Counter Wrap-Around Value" group.long 0x414++0x03 line.long 0x00 "ATINC,Time-Stamping Clock Period Register" hexmask.long.byte 0x00 8.--14. 1. "INC_CORR,Correction Increment Value" hexmask.long.byte 0x00 0.--6. 1. "INC,Clock Period Of The Timestamping Clock (ts_clk) In Nanoseconds" rgroup.long 0x418++0x03 line.long 0x00 "ATSTMP,Timestamp of Last Transmitted Frame" hexmask.long 0x00 0.--31. 1. "TIMESTAMP,Timestamp of the last frame transmitted by the core that had TxBD[TS] set the ff_tx_ts_frm signal asserted from the user application" group.long 0x604++0x03 line.long 0x00 "TGSR,Timer Global Status Register" eventfld.long 0x00 3. "TF3,Copy Of Timer Flag For Channel 3" "0: Timer Flag for Channel 3 is clear,1: Timer Flag for Channel 3 is set" eventfld.long 0x00 2. "TF2,Copy Of Timer Flag For Channel 2" "0: Timer Flag for Channel 2 is clear,1: Timer Flag for Channel 2 is set" newline eventfld.long 0x00 1. "TF1,Copy Of Timer Flag For Channel 1" "0: Timer Flag for Channel 1 is clear,1: Timer Flag for Channel 1 is set" eventfld.long 0x00 0. "TF0,Copy Of Timer Flag For Channel 0" "0: Timer Flag for Channel 0 is clear,1: Timer Flag for Channel 0 is set" group.long 0x608++0x03 line.long 0x00 "TCSR0,Timer Control Status Register" bitfld.long 0x00 11.--15. "TPWC,Timer PulseWidth Control" "0: Pulse width is one 1588-clock cycle,1: Pulse width is two 1588-clock cycles,2: Pulse width is three 1588-clock cycles,3: Pulse width is four 1588-clock cycles,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Pulse width is 32 1588-clock cycles" eventfld.long 0x00 7. "TF,Timer Flag" "0: Input Capture or Output Compare has not..,1: Input Capture or Output Compare has occurred" newline bitfld.long 0x00 6. "TIE,Timer Interrupt Enable" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 2.--5. "TMODE,Timer Mode" "0: Timer Channel is disabled,1: Timer Channel is configured for Input Capture..,2: Timer Channel is configured for Input Capture..,3: Timer Channel is configured for Input Capture..,4: Timer Channel is configured for Output..,5: Timer Channel is configured for Output..,6: Timer Channel is configured for Output..,7: Timer Channel is configured for Output..,?,9: Timer Channel is configured for Output..,10: Timer Channel is configured for Output..,11: Timer Channel is configured for Output..,?,?,14: Timer Channel is configured for Output..,15: Timer Channel is configured for Output.." newline bitfld.long 0x00 0. "TDRE,Timer DMA Request Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x60C++0x03 line.long 0x00 "TCCR0,Timer Compare Capture Register" hexmask.long 0x00 0.--31. 1. "TCC,Timer Capture Compare" group.long 0x610++0x03 line.long 0x00 "TCSR1,Timer Control Status Register" bitfld.long 0x00 11.--15. "TPWC,Timer PulseWidth Control" "0: Pulse width is one 1588-clock cycle,1: Pulse width is two 1588-clock cycles,2: Pulse width is three 1588-clock cycles,3: Pulse width is four 1588-clock cycles,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Pulse width is 32 1588-clock cycles" eventfld.long 0x00 7. "TF,Timer Flag" "0: Input Capture or Output Compare has not..,1: Input Capture or Output Compare has occurred" newline bitfld.long 0x00 6. "TIE,Timer Interrupt Enable" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 2.--5. "TMODE,Timer Mode" "0: Timer Channel is disabled,1: Timer Channel is configured for Input Capture..,2: Timer Channel is configured for Input Capture..,3: Timer Channel is configured for Input Capture..,4: Timer Channel is configured for Output..,5: Timer Channel is configured for Output..,6: Timer Channel is configured for Output..,7: Timer Channel is configured for Output..,?,9: Timer Channel is configured for Output..,10: Timer Channel is configured for Output..,11: Timer Channel is configured for Output..,?,?,14: Timer Channel is configured for Output..,15: Timer Channel is configured for Output.." newline bitfld.long 0x00 0. "TDRE,Timer DMA Request Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x614++0x03 line.long 0x00 "TCCR1,Timer Compare Capture Register" hexmask.long 0x00 0.--31. 1. "TCC,Timer Capture Compare" group.long 0x618++0x03 line.long 0x00 "TCSR2,Timer Control Status Register" bitfld.long 0x00 11.--15. "TPWC,Timer PulseWidth Control" "0: Pulse width is one 1588-clock cycle,1: Pulse width is two 1588-clock cycles,2: Pulse width is three 1588-clock cycles,3: Pulse width is four 1588-clock cycles,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Pulse width is 32 1588-clock cycles" eventfld.long 0x00 7. "TF,Timer Flag" "0: Input Capture or Output Compare has not..,1: Input Capture or Output Compare has occurred" newline bitfld.long 0x00 6. "TIE,Timer Interrupt Enable" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 2.--5. "TMODE,Timer Mode" "0: Timer Channel is disabled,1: Timer Channel is configured for Input Capture..,2: Timer Channel is configured for Input Capture..,3: Timer Channel is configured for Input Capture..,4: Timer Channel is configured for Output..,5: Timer Channel is configured for Output..,6: Timer Channel is configured for Output..,7: Timer Channel is configured for Output..,?,9: Timer Channel is configured for Output..,10: Timer Channel is configured for Output..,11: Timer Channel is configured for Output..,?,?,14: Timer Channel is configured for Output..,15: Timer Channel is configured for Output.." newline bitfld.long 0x00 0. "TDRE,Timer DMA Request Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x61C++0x03 line.long 0x00 "TCCR2,Timer Compare Capture Register" hexmask.long 0x00 0.--31. 1. "TCC,Timer Capture Compare" group.long 0x620++0x03 line.long 0x00 "TCSR3,Timer Control Status Register" bitfld.long 0x00 11.--15. "TPWC,Timer PulseWidth Control" "0: Pulse width is one 1588-clock cycle,1: Pulse width is two 1588-clock cycles,2: Pulse width is three 1588-clock cycles,3: Pulse width is four 1588-clock cycles,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Pulse width is 32 1588-clock cycles" eventfld.long 0x00 7. "TF,Timer Flag" "0: Input Capture or Output Compare has not..,1: Input Capture or Output Compare has occurred" newline bitfld.long 0x00 6. "TIE,Timer Interrupt Enable" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 2.--5. "TMODE,Timer Mode" "0: Timer Channel is disabled,1: Timer Channel is configured for Input Capture..,2: Timer Channel is configured for Input Capture..,3: Timer Channel is configured for Input Capture..,4: Timer Channel is configured for Output..,5: Timer Channel is configured for Output..,6: Timer Channel is configured for Output..,7: Timer Channel is configured for Output..,?,9: Timer Channel is configured for Output..,10: Timer Channel is configured for Output..,11: Timer Channel is configured for Output..,?,?,14: Timer Channel is configured for Output..,15: Timer Channel is configured for Output.." newline bitfld.long 0x00 0. "TDRE,Timer DMA Request Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x624++0x03 line.long 0x00 "TCCR3,Timer Compare Capture Register" hexmask.long 0x00 0.--31. 1. "TCC,Timer Capture Compare" tree.end sif cpuis("IMX8UD3-CM33")||cpuis("IMX8UD3")||cpuis("IMX8UD7")||cpuis("IMX8UD7-CM33")||cpuis("IMX8US3")||cpuis("IMX8US3-CM33") tree "EPDC" base ad:0x3DB30000 sif cpuis("IMX8UD3-CM33") group.long 0x00++0x03 line.long 0x00 "EPDC_CTRL,EPDC Control Register" bitfld.long 0x00 31. "SFTRST,Set this bit to zero to enable normal EPDC operation" "0,1" bitfld.long 0x00 30. "CLKGATE,This bit must be set to zero for normal operation" "0,1" newline bitfld.long 0x00 29. "FRAME_CLEAR_EN,when this bit is enalbe ub_loader module will be cleared each frame as long as sw_reset_n" "0,1" bitfld.long 0x00 28. "LUT_STATE_SW_RESET_EN,when this bit is enalbe lut_state will be reset to IDLE status" "0,1" newline bitfld.long 0x00 6.--7. "UPD_DATA_SWIZZLE,Specifies how to swap the bytes for the UPD data before the WB construction" "0: No byte swapping.(Little endian),1: Swizzle all bytes swap bytes 0 3 and 1 2 (aka..,2: Swap half-words,3: Swap bytes within each half-word" bitfld.long 0x00 4.--5. "LUT_DATA_SWIZZLE,Specifies how to swap the bytes for the LUT data before store to LUTRAM" "0: No byte swapping.(Little endian),1: Swizzle all bytes swap bytes 0 3 and 1 2 (aka..,2: Swap half-words,3: Swap bytes within each half-word" group.long 0x04++0x03 line.long 0x00 "EPDC_CTRL_SET,EPDC Control Register" bitfld.long 0x00 31. "SFTRST,Set this bit to zero to enable normal EPDC operation" "0,1" bitfld.long 0x00 30. "CLKGATE,This bit must be set to zero for normal operation" "0,1" newline bitfld.long 0x00 29. "FRAME_CLEAR_EN,when this bit is enalbe ub_loader module will be cleared each frame as long as sw_reset_n" "0,1" bitfld.long 0x00 28. "LUT_STATE_SW_RESET_EN,when this bit is enalbe lut_state will be reset to IDLE status" "0,1" newline bitfld.long 0x00 6.--7. "UPD_DATA_SWIZZLE,Specifies how to swap the bytes for the UPD data before the WB construction" "0,1,2,3" bitfld.long 0x00 4.--5. "LUT_DATA_SWIZZLE,Specifies how to swap the bytes for the LUT data before store to LUTRAM" "0,1,2,3" group.long 0x08++0x03 line.long 0x00 "EPDC_CTRL_CLR,EPDC Control Register" eventfld.long 0x00 31. "SFTRST,Set this bit to zero to enable normal EPDC operation" "0,1" eventfld.long 0x00 30. "CLKGATE,This bit must be set to zero for normal operation" "0,1" newline eventfld.long 0x00 29. "FRAME_CLEAR_EN,when this bit is enalbe ub_loader module will be cleared each frame as long as sw_reset_n" "0,1" eventfld.long 0x00 28. "LUT_STATE_SW_RESET_EN,when this bit is enalbe lut_state will be reset to IDLE status" "0,1" newline eventfld.long 0x00 6.--7. "UPD_DATA_SWIZZLE,Specifies how to swap the bytes for the UPD data before the WB construction" "0,1,2,3" eventfld.long 0x00 4.--5. "LUT_DATA_SWIZZLE,Specifies how to swap the bytes for the LUT data before store to LUTRAM" "0,1,2,3" group.long 0x0C++0x03 line.long 0x00 "EPDC_CTRL_TOG,EPDC Control Register" bitfld.long 0x00 31. "SFTRST,Set this bit to zero to enable normal EPDC operation" "0,1" bitfld.long 0x00 30. "CLKGATE,This bit must be set to zero for normal operation" "0,1" newline bitfld.long 0x00 29. "FRAME_CLEAR_EN,when this bit is enalbe ub_loader module will be cleared each frame as long as sw_reset_n" "0,1" bitfld.long 0x00 28. "LUT_STATE_SW_RESET_EN,when this bit is enalbe lut_state will be reset to IDLE status" "0,1" newline bitfld.long 0x00 6.--7. "UPD_DATA_SWIZZLE,Specifies how to swap the bytes for the UPD data before the WB construction" "0,1,2,3" bitfld.long 0x00 4.--5. "LUT_DATA_SWIZZLE,Specifies how to swap the bytes for the LUT data before store to LUTRAM" "0,1,2,3" group.long 0x10++0x03 line.long 0x00 "EPDC_WB_ADDR_TCE,EPDC Working Buffer Address for TCE" hexmask.long 0x00 0.--31. 1. "ADDR,Address for EPDC working buffer" group.long 0x20++0x03 line.long 0x00 "EPDC_WVADDR,EPDC Waveform Address Pointer" hexmask.long 0x00 0.--31. 1. "ADDR,Start address of waveform tables" group.long 0x30++0x03 line.long 0x00 "EPDC_WB_ADDR,EPDC Working Buffer Address" hexmask.long 0x00 0.--31. 1. "ADDR,Address for EPDC working buffer" group.long 0x40++0x03 line.long 0x00 "EPDC_RES,EPDC Screen Resolution" hexmask.long.word 0x00 16.--28. 1. "VERTICAL,Vertical Resoltion (in pixels)" hexmask.long.word 0x00 0.--12. 1. "HORIZONTAL,Horizontal Resolution (in pixels)" group.long 0x50++0x03 line.long 0x00 "EPDC_FORMAT,EPDC Format Control Register" bitfld.long 0x00 24. "BUF_PIXEL_SCALE,Selects method of conversion from 8-bit input" "0: Use Truncate method (LSB),1: Use rounding method (with saturation)" hexmask.long.byte 0x00 16.--23. 1. "DEFAULT_TFT_PIXEL,Default TFT pixel value" newline bitfld.long 0x00 12.--13. "WB_TYPE,no description available" "0: internal Working Buffer written by EPDC itself,1: working buffer is actually holding waveform,2: 16bit working buffer written by PXP or CPU,3: 32bit working buffer written by PXP or CPU" bitfld.long 0x00 11. "WB_COMPRESS,whether the working buffer is compressed only avilable on WB_FORMAT=EXTERNAL16/32 mode" "0,1" newline bitfld.long 0x00 0.--1. "TFT_PIXEL_FORMAT,EPDC TFT Pixel Format" "0: 2-bit,1: 2-bit and VCOM,2: 4-bit,3: 4-bit and VCOM" group.long 0x54++0x03 line.long 0x00 "EPDC_FORMAT_SET,EPDC Format Control Register" bitfld.long 0x00 24. "BUF_PIXEL_SCALE,Selects method of conversion from 8-bit input" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DEFAULT_TFT_PIXEL,Default TFT pixel value" newline bitfld.long 0x00 12.--13. "WB_TYPE,no description available" "0,1,2,3" bitfld.long 0x00 11. "WB_COMPRESS,whether the working buffer is compressed only avilable on WB_FORMAT=EXTERNAL16/32 mode" "0,1" newline bitfld.long 0x00 0.--1. "TFT_PIXEL_FORMAT,EPDC TFT Pixel Format" "0,1,2,3" group.long 0x58++0x03 line.long 0x00 "EPDC_FORMAT_CLR,EPDC Format Control Register" eventfld.long 0x00 24. "BUF_PIXEL_SCALE,Selects method of conversion from 8-bit input" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DEFAULT_TFT_PIXEL,Default TFT pixel value" newline eventfld.long 0x00 12.--13. "WB_TYPE,no description available" "0,1,2,3" eventfld.long 0x00 11. "WB_COMPRESS,whether the working buffer is compressed only avilable on WB_FORMAT=EXTERNAL16/32 mode" "0,1" newline eventfld.long 0x00 0.--1. "TFT_PIXEL_FORMAT,EPDC TFT Pixel Format" "0,1,2,3" group.long 0x5C++0x03 line.long 0x00 "EPDC_FORMAT_TOG,EPDC Format Control Register" bitfld.long 0x00 24. "BUF_PIXEL_SCALE,Selects method of conversion from 8-bit input" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DEFAULT_TFT_PIXEL,Default TFT pixel value" newline bitfld.long 0x00 12.--13. "WB_TYPE,no description available" "0,1,2,3" bitfld.long 0x00 11. "WB_COMPRESS,whether the working buffer is compressed only avilable on WB_FORMAT=EXTERNAL16/32 mode" "0,1" newline bitfld.long 0x00 0.--1. "TFT_PIXEL_FORMAT,EPDC TFT Pixel Format" "0,1,2,3" group.long 0x60++0x03 line.long 0x00 "EPDC_WB_FIELD0,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0: not using FIXED field,1: set this field to a FIXED value which..,2: mask off this pixel if this field is non..,3: mask off this pixel if this field is equal to.." newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0: NOT_USED,?,?,3: PARTIAL (won't contribute to lut lookup index),4: LUT,5: CP,6: NP,7: PTS" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x64++0x03 line.long 0x00 "EPDC_WB_FIELD0_SET,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x68++0x03 line.long 0x00 "EPDC_WB_FIELD0_CLR,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" eventfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline eventfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" eventfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" eventfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x6C++0x03 line.long 0x00 "EPDC_WB_FIELD0_TOG,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x70++0x03 line.long 0x00 "EPDC_WB_FIELD1,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0: not using FIXED field,1: set this field to a FIXED value which..,2: mask off this pixel if this field is non..,3: mask off this pixel if this field is equal to.." newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0: NOT_USED,?,?,3: PARTIAL,4: LUT,5: CP,6: NP,7: PTS" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x74++0x03 line.long 0x00 "EPDC_WB_FIELD1_SET,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x78++0x03 line.long 0x00 "EPDC_WB_FIELD1_CLR,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" eventfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline eventfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" eventfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" eventfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x7C++0x03 line.long 0x00 "EPDC_WB_FIELD1_TOG,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "EPDC_WB_FIELD2,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0: not using FIXED field,1: set this field to a FIXED value which..,2: mask off this pixel if this field is non..,3: mask off this pixel if this field is equal to.." newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0: NOT_USED,?,?,3: PARTIAL,4: LUT,5: CP,6: NP,7: PTS" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x84++0x03 line.long 0x00 "EPDC_WB_FIELD2_SET,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x88++0x03 line.long 0x00 "EPDC_WB_FIELD2_CLR,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" eventfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline eventfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" eventfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" eventfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8C++0x03 line.long 0x00 "EPDC_WB_FIELD2_TOG,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "EPDC_WB_FIELD3,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0: not using FIXED field,1: set this field to a FIXED value which..,2: mask off this pixel if this field is non..,3: mask off this pixel if this field is equal to.." newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0: NOT_USED,?,?,3: PARTIAL,4: LUT,5: CP,6: NP,7: PTS" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x94++0x03 line.long 0x00 "EPDC_WB_FIELD3_SET,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x98++0x03 line.long 0x00 "EPDC_WB_FIELD3_CLR,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" eventfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline eventfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" eventfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" eventfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x9C++0x03 line.long 0x00 "EPDC_WB_FIELD3_TOG,Working Buffer Field Setting" hexmask.long.byte 0x00 24.--31. 1. "FIXED,used to either force field into a fixed value or compare to wb field to mask off the pixel" bitfld.long 0x00 16.--17. "USE_FIXED,usage of the FIXED value" "0,1,2,3" newline bitfld.long 0x00 13.--15. "USAGE,no description available" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "FROM,Source Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "TO,Target Field's LSB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "LEN,Field length minus 1 (0x0 means length=1 0xf means length=16)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x03 line.long 0x00 "EPDC_FIFOCTRL,EPDC FIFO control register" bitfld.long 0x00 31. "ENABLE_PRIORITY,Enable watermark-based priority elevation mechanism" "0,1" hexmask.long.word 0x00 20.--29. 1. "FIFO_INIT_LEVEL,This register sets the watermark for the pixel-fifo" newline hexmask.long.word 0x00 10.--19. 1. "FIFO_H_LEVEL,Upper level value of FIFO watermark" hexmask.long.word 0x00 0.--9. 1. "FIFO_L_LEVEL,Lower level value of FIFO watermark" group.long 0xA4++0x03 line.long 0x00 "EPDC_FIFOCTRL_SET,EPDC FIFO control register" bitfld.long 0x00 31. "ENABLE_PRIORITY,Enable watermark-based priority elevation mechanism" "0,1" hexmask.long.word 0x00 20.--29. 1. "FIFO_INIT_LEVEL,This register sets the watermark for the pixel-fifo" newline hexmask.long.word 0x00 10.--19. 1. "FIFO_H_LEVEL,Upper level value of FIFO watermark" hexmask.long.word 0x00 0.--9. 1. "FIFO_L_LEVEL,Lower level value of FIFO watermark" group.long 0xA8++0x03 line.long 0x00 "EPDC_FIFOCTRL_CLR,EPDC FIFO control register" eventfld.long 0x00 31. "ENABLE_PRIORITY,Enable watermark-based priority elevation mechanism" "0,1" hexmask.long.word 0x00 20.--29. 1. "FIFO_INIT_LEVEL,This register sets the watermark for the pixel-fifo" newline hexmask.long.word 0x00 10.--19. 1. "FIFO_H_LEVEL,Upper level value of FIFO watermark" hexmask.long.word 0x00 0.--9. 1. "FIFO_L_LEVEL,Lower level value of FIFO watermark" group.long 0xAC++0x03 line.long 0x00 "EPDC_FIFOCTRL_TOG,EPDC FIFO control register" bitfld.long 0x00 31. "ENABLE_PRIORITY,Enable watermark-based priority elevation mechanism" "0,1" hexmask.long.word 0x00 20.--29. 1. "FIFO_INIT_LEVEL,This register sets the watermark for the pixel-fifo" newline hexmask.long.word 0x00 10.--19. 1. "FIFO_H_LEVEL,Upper level value of FIFO watermark" hexmask.long.word 0x00 0.--9. 1. "FIFO_L_LEVEL,Lower level value of FIFO watermark" group.long 0x100++0x03 line.long 0x00 "EPDC_UPD_ADDR,EPDC Update Region Address" hexmask.long 0x00 0.--31. 1. "ADDR,Address for incoming region update" group.long 0x110++0x03 line.long 0x00 "EPDC_UPD_STRIDE,EPDC Update Region Stride" hexmask.long 0x00 0.--31. 1. "STRIDE,line stride for incoming region update" group.long 0x120++0x03 line.long 0x00 "EPDC_UPD_CORD,EPDC Update Command Co-ordinate" hexmask.long.word 0x00 16.--28. 1. "YCORD,Y co-ordinate for incoming region update" hexmask.long.word 0x00 0.--12. 1. "XCORD,X co-ordinate for incoming region update" group.long 0x140++0x03 line.long 0x00 "EPDC_UPD_SIZE,EPDC Update Command Size" hexmask.long.word 0x00 16.--28. 1. "HEIGHT,Height (in pixels)" hexmask.long.word 0x00 0.--12. 1. "WIDTH,Width (in pixels)" group.long 0x160++0x03 line.long 0x00 "EPDC_UPD_CTRL,EPDC Update Command Control" bitfld.long 0x00 31. "USE_FIXED,Use fixed pixel values (requires programming of EPDC_UPD_FIXED)" "0,1" bitfld.long 0x00 16.--21. "LUT_SEL,LUT select 0-63" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "WAVEFORM_MODE,Waveform Mode 0-255" bitfld.long 0x00 5. "STANDBY,no description available" "0,1" newline bitfld.long 0x00 4. "NO_LUT_CANCEL,EPDC will cancel LUT loading for void update (no real update needed because of partial or collision) set this bit to 1 to disable this feature" "0,1" bitfld.long 0x00 3. "PAUSE,no description available" "0: epdc will analyze update buffer report..,1: epdc will analyze update buffer report.." newline bitfld.long 0x00 2. "AUTOWV,enable automatical waveform mode selection" "0,1" bitfld.long 0x00 1. "DRY_RUN,Enable Dry Run mode(set to 1)" "0,1" newline bitfld.long 0x00 0. "UPDATE_MODE,Update Mode" "0: Partial Update,1: Full Update" group.long 0x164++0x03 line.long 0x00 "EPDC_UPD_CTRL_SET,EPDC Update Command Control" bitfld.long 0x00 31. "USE_FIXED,Use fixed pixel values (requires programming of EPDC_UPD_FIXED)" "0,1" bitfld.long 0x00 16.--21. "LUT_SEL,LUT select 0-63" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "WAVEFORM_MODE,Waveform Mode 0-255" bitfld.long 0x00 5. "STANDBY,no description available" "0,1" newline bitfld.long 0x00 4. "NO_LUT_CANCEL,EPDC will cancel LUT loading for void update (no real update needed because of partial or collision) set this bit to 1 to disable this feature" "0,1" bitfld.long 0x00 3. "PAUSE,no description available" "0,1" newline bitfld.long 0x00 2. "AUTOWV,enable automatical waveform mode selection" "0,1" bitfld.long 0x00 1. "DRY_RUN,Enable Dry Run mode(set to 1)" "0,1" newline bitfld.long 0x00 0. "UPDATE_MODE,Update Mode" "0,1" group.long 0x168++0x03 line.long 0x00 "EPDC_UPD_CTRL_CLR,EPDC Update Command Control" eventfld.long 0x00 31. "USE_FIXED,Use fixed pixel values (requires programming of EPDC_UPD_FIXED)" "0,1" eventfld.long 0x00 16.--21. "LUT_SEL,LUT select 0-63" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "WAVEFORM_MODE,Waveform Mode 0-255" eventfld.long 0x00 5. "STANDBY,no description available" "0,1" newline eventfld.long 0x00 4. "NO_LUT_CANCEL,EPDC will cancel LUT loading for void update (no real update needed because of partial or collision) set this bit to 1 to disable this feature" "0,1" eventfld.long 0x00 3. "PAUSE,no description available" "0,1" newline eventfld.long 0x00 2. "AUTOWV,enable automatical waveform mode selection" "0,1" eventfld.long 0x00 1. "DRY_RUN,Enable Dry Run mode(set to 1)" "0,1" newline eventfld.long 0x00 0. "UPDATE_MODE,Update Mode" "0,1" group.long 0x16C++0x03 line.long 0x00 "EPDC_UPD_CTRL_TOG,EPDC Update Command Control" bitfld.long 0x00 31. "USE_FIXED,Use fixed pixel values (requires programming of EPDC_UPD_FIXED)" "0,1" bitfld.long 0x00 16.--21. "LUT_SEL,LUT select 0-63" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "WAVEFORM_MODE,Waveform Mode 0-255" bitfld.long 0x00 5. "STANDBY,no description available" "0,1" newline bitfld.long 0x00 4. "NO_LUT_CANCEL,EPDC will cancel LUT loading for void update (no real update needed because of partial or collision) set this bit to 1 to disable this feature" "0,1" bitfld.long 0x00 3. "PAUSE,no description available" "0,1" newline bitfld.long 0x00 2. "AUTOWV,enable automatical waveform mode selection" "0,1" bitfld.long 0x00 1. "DRY_RUN,Enable Dry Run mode(set to 1)" "0,1" newline bitfld.long 0x00 0. "UPDATE_MODE,Update Mode" "0,1" group.long 0x180++0x03 line.long 0x00 "EPDC_UPD_FIXED,EPDC Update Fixed Pixel Control" bitfld.long 0x00 31. "FIXNP_EN,If set to 1 current updated region has the NP value defined by FIXNP" "0,1" bitfld.long 0x00 30. "FIXCP_EN,If set to 1 current updated region has the CP value defined by FIXCP" "0,1" newline hexmask.long.byte 0x00 8.--15. 1. "FIXNP,NP value if fixenp_en is set to 1" hexmask.long.byte 0x00 0.--7. 1. "FIXCP,CP value if fixecp_en is set to 1" group.long 0x184++0x03 line.long 0x00 "EPDC_UPD_FIXED_SET,EPDC Update Fixed Pixel Control" bitfld.long 0x00 31. "FIXNP_EN,If set to 1 current updated region has the NP value defined by FIXNP" "0,1" bitfld.long 0x00 30. "FIXCP_EN,If set to 1 current updated region has the CP value defined by FIXCP" "0,1" newline hexmask.long.byte 0x00 8.--15. 1. "FIXNP,NP value if fixenp_en is set to 1" hexmask.long.byte 0x00 0.--7. 1. "FIXCP,CP value if fixecp_en is set to 1" group.long 0x188++0x03 line.long 0x00 "EPDC_UPD_FIXED_CLR,EPDC Update Fixed Pixel Control" eventfld.long 0x00 31. "FIXNP_EN,If set to 1 current updated region has the NP value defined by FIXNP" "0,1" eventfld.long 0x00 30. "FIXCP_EN,If set to 1 current updated region has the CP value defined by FIXCP" "0,1" newline hexmask.long.byte 0x00 8.--15. 1. "FIXNP,NP value if fixenp_en is set to 1" hexmask.long.byte 0x00 0.--7. 1. "FIXCP,CP value if fixecp_en is set to 1" group.long 0x18C++0x03 line.long 0x00 "EPDC_UPD_FIXED_TOG,EPDC Update Fixed Pixel Control" bitfld.long 0x00 31. "FIXNP_EN,If set to 1 current updated region has the NP value defined by FIXNP" "0,1" bitfld.long 0x00 30. "FIXCP_EN,If set to 1 current updated region has the CP value defined by FIXCP" "0,1" newline hexmask.long.byte 0x00 8.--15. 1. "FIXNP,NP value if fixenp_en is set to 1" hexmask.long.byte 0x00 0.--7. 1. "FIXCP,CP value if fixecp_en is set to 1" group.long 0x1A0++0x03 line.long 0x00 "EPDC_TEMP,EPDC Temperature Register" hexmask.long 0x00 0.--31. 1. "TEMPERATURE,Temperature Value" group.long 0x1C0++0x03 line.long 0x00 "EPDC_AUTOWV_LUT,Waveform Mode Lookup Table Control Register" hexmask.long.byte 0x00 16.--23. 1. "DATA,DATA" bitfld.long 0x00 0.--2. "ADDR,ADDR" "0,1,2,3,4,5,6,7" group.long 0x1E0++0x03 line.long 0x00 "EPDC_LUT_STANDBY1,EPDC LUT Standby Register for LUT 31~0" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 0~31 standby control" group.long 0x1E4++0x03 line.long 0x00 "EPDC_LUT_STANDBY1_SET,EPDC LUT Standby Register for LUT 31~0" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 0~31 standby control" group.long 0x1E8++0x03 line.long 0x00 "EPDC_LUT_STANDBY1_CLR,EPDC LUT Standby Register for LUT 31~0" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 0~31 standby control" group.long 0x1EC++0x03 line.long 0x00 "EPDC_LUT_STANDBY1_TOG,EPDC LUT Standby Register for LUT 31~0" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 0~31 standby control" group.long 0x1F0++0x03 line.long 0x00 "EPDC_LUT_STANDBY2,EPDC LUT Standby Registerr for LUT 63~32" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 32~64 Standby Control" group.long 0x1F4++0x03 line.long 0x00 "EPDC_LUT_STANDBY2_SET,EPDC LUT Standby Registerr for LUT 63~32" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 32~64 Standby Control" group.long 0x1F8++0x03 line.long 0x00 "EPDC_LUT_STANDBY2_CLR,EPDC LUT Standby Registerr for LUT 63~32" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 32~64 Standby Control" group.long 0x1FC++0x03 line.long 0x00 "EPDC_LUT_STANDBY2_TOG,EPDC LUT Standby Registerr for LUT 63~32" hexmask.long 0x00 0.--31. 1. "LUTN,LUT 32~64 Standby Control" group.long 0x200++0x03 line.long 0x00 "EPDC_TCE_CTRL,EPDC Timing Control Engine Control Register" hexmask.long.word 0x00 16.--24. 1. "VSCAN_HOLDOFF,This period (expressed in vertical lines) sets the portion of the vertical blanking available for new LUTs to be activated" bitfld.long 0x00 13. "UNDERRUN_LOOKUP_MASK_EN,when this bit set to 1 when underrun happen it will stop to lookup the lut data but use the default value to avoid destroying the pannel" "0,1" newline bitfld.long 0x00 12. "WB_EXTERNAL_RANGE_EN,when this bit set to 1 even using wb external it will check the range with lut_active at the same time to determine lookup en or not" "0,1" bitfld.long 0x00 10.--11. "VCOM_VAL,When VCOM_MODE = MANUAL this value is used to manually set the VCOM value for the VCOM[1:0] pins" "0,1,2,3" newline bitfld.long 0x00 9. "VCOM_MODE,This field determines the method used to drive the VCOM signal" "0: VCOM Value is set manually using VCOM_VAL field,1: VCOM Value is used from waveform" bitfld.long 0x00 8. "DDR_MODE,If set SDDO data is driven on both positive and negative edges of SDCLK" "0,1" newline bitfld.long 0x00 7. "LVDS_MODE_CE,If set (together with LVDS_MODE=1) SDCE[9:5] shall be driven as the differential inverse of SDCE[4:0]" "0,1" bitfld.long 0x00 6. "LVDS_MODE,If set the upper 8-bit of the SDDO bus are used for LVDS differential signalling" "0,1" newline bitfld.long 0x00 5. "SCAN_DIR_1,Determines scan direction for each half of the TFT panel" "0: Scan this region from top to bottom,1: Scan this region from bottom to top" bitfld.long 0x00 4. "SCAN_DIR_0,Determines scan direction for each half of the TFT panel" "0: Scan this region from top to bottom,1: Scan this region from bottom to top" newline bitfld.long 0x00 3. "DUAL_SCAN,Enables dual scan-mode" "0,1" bitfld.long 0x00 2. "SDDO_WIDTH,Selects either 8 or 16 bit SDDO bus format" "0: Connect to 8-bit source driver,1: Connct to 16-bit source driver" newline bitfld.long 0x00 0.--1. "PIXELS_PER_SDCLK,Number of TFT pixels per SDCLK period" "?,1: Two TFT-pixels per SDCLK,2: Four TFT-pixels per SDCLK,3: Eight TFT-pixels per SDCLK" group.long 0x204++0x03 line.long 0x00 "EPDC_TCE_CTRL_SET,EPDC Timing Control Engine Control Register" hexmask.long.word 0x00 16.--24. 1. "VSCAN_HOLDOFF,This period (expressed in vertical lines) sets the portion of the vertical blanking available for new LUTs to be activated" bitfld.long 0x00 13. "UNDERRUN_LOOKUP_MASK_EN,when this bit set to 1 when underrun happen it will stop to lookup the lut data but use the default value to avoid destroying the pannel" "0,1" newline bitfld.long 0x00 12. "WB_EXTERNAL_RANGE_EN,when this bit set to 1 even using wb external it will check the range with lut_active at the same time to determine lookup en or not" "0,1" bitfld.long 0x00 10.--11. "VCOM_VAL,When VCOM_MODE = MANUAL this value is used to manually set the VCOM value for the VCOM[1:0] pins" "0,1,2,3" newline bitfld.long 0x00 9. "VCOM_MODE,This field determines the method used to drive the VCOM signal" "0,1" bitfld.long 0x00 8. "DDR_MODE,If set SDDO data is driven on both positive and negative edges of SDCLK" "0,1" newline bitfld.long 0x00 7. "LVDS_MODE_CE,If set (together with LVDS_MODE=1) SDCE[9:5] shall be driven as the differential inverse of SDCE[4:0]" "0,1" bitfld.long 0x00 6. "LVDS_MODE,If set the upper 8-bit of the SDDO bus are used for LVDS differential signalling" "0,1" newline bitfld.long 0x00 5. "SCAN_DIR_1,Determines scan direction for each half of the TFT panel" "0,1" bitfld.long 0x00 4. "SCAN_DIR_0,Determines scan direction for each half of the TFT panel" "0,1" newline bitfld.long 0x00 3. "DUAL_SCAN,Enables dual scan-mode" "0,1" bitfld.long 0x00 2. "SDDO_WIDTH,Selects either 8 or 16 bit SDDO bus format" "0,1" newline bitfld.long 0x00 0.--1. "PIXELS_PER_SDCLK,Number of TFT pixels per SDCLK period" "0,1,2,3" group.long 0x208++0x03 line.long 0x00 "EPDC_TCE_CTRL_CLR,EPDC Timing Control Engine Control Register" hexmask.long.word 0x00 16.--24. 1. "VSCAN_HOLDOFF,This period (expressed in vertical lines) sets the portion of the vertical blanking available for new LUTs to be activated" eventfld.long 0x00 13. "UNDERRUN_LOOKUP_MASK_EN,when this bit set to 1 when underrun happen it will stop to lookup the lut data but use the default value to avoid destroying the pannel" "0,1" newline eventfld.long 0x00 12. "WB_EXTERNAL_RANGE_EN,when this bit set to 1 even using wb external it will check the range with lut_active at the same time to determine lookup en or not" "0,1" eventfld.long 0x00 10.--11. "VCOM_VAL,When VCOM_MODE = MANUAL this value is used to manually set the VCOM value for the VCOM[1:0] pins" "0,1,2,3" newline eventfld.long 0x00 9. "VCOM_MODE,This field determines the method used to drive the VCOM signal" "0,1" eventfld.long 0x00 8. "DDR_MODE,If set SDDO data is driven on both positive and negative edges of SDCLK" "0,1" newline eventfld.long 0x00 7. "LVDS_MODE_CE,If set (together with LVDS_MODE=1) SDCE[9:5] shall be driven as the differential inverse of SDCE[4:0]" "0,1" eventfld.long 0x00 6. "LVDS_MODE,If set the upper 8-bit of the SDDO bus are used for LVDS differential signalling" "0,1" newline eventfld.long 0x00 5. "SCAN_DIR_1,Determines scan direction for each half of the TFT panel" "0,1" eventfld.long 0x00 4. "SCAN_DIR_0,Determines scan direction for each half of the TFT panel" "0,1" newline eventfld.long 0x00 3. "DUAL_SCAN,Enables dual scan-mode" "0,1" eventfld.long 0x00 2. "SDDO_WIDTH,Selects either 8 or 16 bit SDDO bus format" "0,1" newline eventfld.long 0x00 0.--1. "PIXELS_PER_SDCLK,Number of TFT pixels per SDCLK period" "0,1,2,3" group.long 0x20C++0x03 line.long 0x00 "EPDC_TCE_CTRL_TOG,EPDC Timing Control Engine Control Register" hexmask.long.word 0x00 16.--24. 1. "VSCAN_HOLDOFF,This period (expressed in vertical lines) sets the portion of the vertical blanking available for new LUTs to be activated" bitfld.long 0x00 13. "UNDERRUN_LOOKUP_MASK_EN,when this bit set to 1 when underrun happen it will stop to lookup the lut data but use the default value to avoid destroying the pannel" "0,1" newline bitfld.long 0x00 12. "WB_EXTERNAL_RANGE_EN,when this bit set to 1 even using wb external it will check the range with lut_active at the same time to determine lookup en or not" "0,1" bitfld.long 0x00 10.--11. "VCOM_VAL,When VCOM_MODE = MANUAL this value is used to manually set the VCOM value for the VCOM[1:0] pins" "0,1,2,3" newline bitfld.long 0x00 9. "VCOM_MODE,This field determines the method used to drive the VCOM signal" "0,1" bitfld.long 0x00 8. "DDR_MODE,If set SDDO data is driven on both positive and negative edges of SDCLK" "0,1" newline bitfld.long 0x00 7. "LVDS_MODE_CE,If set (together with LVDS_MODE=1) SDCE[9:5] shall be driven as the differential inverse of SDCE[4:0]" "0,1" bitfld.long 0x00 6. "LVDS_MODE,If set the upper 8-bit of the SDDO bus are used for LVDS differential signalling" "0,1" newline bitfld.long 0x00 5. "SCAN_DIR_1,Determines scan direction for each half of the TFT panel" "0,1" bitfld.long 0x00 4. "SCAN_DIR_0,Determines scan direction for each half of the TFT panel" "0,1" newline bitfld.long 0x00 3. "DUAL_SCAN,Enables dual scan-mode" "0,1" bitfld.long 0x00 2. "SDDO_WIDTH,Selects either 8 or 16 bit SDDO bus format" "0,1" newline bitfld.long 0x00 0.--1. "PIXELS_PER_SDCLK,Number of TFT pixels per SDCLK period" "0,1,2,3" group.long 0x220++0x03 line.long 0x00 "EPDC_TCE_SDCFG,EPDC Timing Control Engine Source-Driver Config Register" bitfld.long 0x00 21. "SDCLK_HOLD,Setting this bit to 1 holds the SDCLK low during LINE_BEGIN" "0,1" bitfld.long 0x00 20. "SDSHR,Value for source-driver shift direction output port" "0,1" newline bitfld.long 0x00 16.--19. "NUM_CE,Number of source driver IC chip-enables" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SDDO_REFORMAT,This register defines the various re-formatting options to enable more flexibility in the source-driver interface" "0: No change,1: Reverses the order of the pixels on SDDO,?..." newline bitfld.long 0x00 13. "SDDO_INVERT,Setting this bit to 1 reverses the polarity of each SDDO bit so 0xAAAA in 16-bit mode for example becomes 0x5555" "0,1" hexmask.long.word 0x00 0.--12. 1. "PIXELS_PER_CE,Number of pixels (outputs) per source-driver IC" group.long 0x224++0x03 line.long 0x00 "EPDC_TCE_SDCFG_SET,EPDC Timing Control Engine Source-Driver Config Register" bitfld.long 0x00 21. "SDCLK_HOLD,Setting this bit to 1 holds the SDCLK low during LINE_BEGIN" "0,1" bitfld.long 0x00 20. "SDSHR,Value for source-driver shift direction output port" "0,1" newline bitfld.long 0x00 16.--19. "NUM_CE,Number of source driver IC chip-enables" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SDDO_REFORMAT,This register defines the various re-formatting options to enable more flexibility in the source-driver interface" "0,1,2,3" newline bitfld.long 0x00 13. "SDDO_INVERT,Setting this bit to 1 reverses the polarity of each SDDO bit so 0xAAAA in 16-bit mode for example becomes 0x5555" "0,1" hexmask.long.word 0x00 0.--12. 1. "PIXELS_PER_CE,Number of pixels (outputs) per source-driver IC" group.long 0x228++0x03 line.long 0x00 "EPDC_TCE_SDCFG_CLR,EPDC Timing Control Engine Source-Driver Config Register" eventfld.long 0x00 21. "SDCLK_HOLD,Setting this bit to 1 holds the SDCLK low during LINE_BEGIN" "0,1" eventfld.long 0x00 20. "SDSHR,Value for source-driver shift direction output port" "0,1" newline eventfld.long 0x00 16.--19. "NUM_CE,Number of source driver IC chip-enables" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" eventfld.long 0x00 14.--15. "SDDO_REFORMAT,This register defines the various re-formatting options to enable more flexibility in the source-driver interface" "0,1,2,3" newline eventfld.long 0x00 13. "SDDO_INVERT,Setting this bit to 1 reverses the polarity of each SDDO bit so 0xAAAA in 16-bit mode for example becomes 0x5555" "0,1" hexmask.long.word 0x00 0.--12. 1. "PIXELS_PER_CE,Number of pixels (outputs) per source-driver IC" group.long 0x22C++0x03 line.long 0x00 "EPDC_TCE_SDCFG_TOG,EPDC Timing Control Engine Source-Driver Config Register" bitfld.long 0x00 21. "SDCLK_HOLD,Setting this bit to 1 holds the SDCLK low during LINE_BEGIN" "0,1" bitfld.long 0x00 20. "SDSHR,Value for source-driver shift direction output port" "0,1" newline bitfld.long 0x00 16.--19. "NUM_CE,Number of source driver IC chip-enables" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 14.--15. "SDDO_REFORMAT,This register defines the various re-formatting options to enable more flexibility in the source-driver interface" "0,1,2,3" newline bitfld.long 0x00 13. "SDDO_INVERT,Setting this bit to 1 reverses the polarity of each SDDO bit so 0xAAAA in 16-bit mode for example becomes 0x5555" "0,1" hexmask.long.word 0x00 0.--12. 1. "PIXELS_PER_CE,Number of pixels (outputs) per source-driver IC" group.long 0x240++0x03 line.long 0x00 "EPDC_TCE_GDCFG,EPDC Timing Control Engine Gate-Driver Config Register" hexmask.long.word 0x00 16.--31. 1. "PERIOD_VSCAN,when vscan state is splited this reg defines the counter period" bitfld.long 0x00 4. "GDRL,Value for gate-driver right/left shift output port" "0,1" newline bitfld.long 0x00 1. "GDOE_MODE,Selects method for driving GDOE signal" "0,1" bitfld.long 0x00 0. "GDSP_MODE,Selects method for driving GDSP pulse" "0,1" group.long 0x244++0x03 line.long 0x00 "EPDC_TCE_GDCFG_SET,EPDC Timing Control Engine Gate-Driver Config Register" hexmask.long.word 0x00 16.--31. 1. "PERIOD_VSCAN,when vscan state is splited this reg defines the counter period" bitfld.long 0x00 4. "GDRL,Value for gate-driver right/left shift output port" "0,1" newline bitfld.long 0x00 1. "GDOE_MODE,Selects method for driving GDOE signal" "0,1" bitfld.long 0x00 0. "GDSP_MODE,Selects method for driving GDSP pulse" "0,1" group.long 0x248++0x03 line.long 0x00 "EPDC_TCE_GDCFG_CLR,EPDC Timing Control Engine Gate-Driver Config Register" hexmask.long.word 0x00 16.--31. 1. "PERIOD_VSCAN,when vscan state is splited this reg defines the counter period" eventfld.long 0x00 4. "GDRL,Value for gate-driver right/left shift output port" "0,1" newline eventfld.long 0x00 1. "GDOE_MODE,Selects method for driving GDOE signal" "0,1" eventfld.long 0x00 0. "GDSP_MODE,Selects method for driving GDSP pulse" "0,1" group.long 0x24C++0x03 line.long 0x00 "EPDC_TCE_GDCFG_TOG,EPDC Timing Control Engine Gate-Driver Config Register" hexmask.long.word 0x00 16.--31. 1. "PERIOD_VSCAN,when vscan state is splited this reg defines the counter period" bitfld.long 0x00 4. "GDRL,Value for gate-driver right/left shift output port" "0,1" newline bitfld.long 0x00 1. "GDOE_MODE,Selects method for driving GDOE signal" "0,1" bitfld.long 0x00 0. "GDSP_MODE,Selects method for driving GDSP pulse" "0,1" group.long 0x260++0x03 line.long 0x00 "EPDC_TCE_HSCAN1,EPDC Timing Control Engine Horizontal Timing Register 1" hexmask.long.word 0x00 16.--27. 1. "LINE_SYNC_WIDTH,Number of PIXCLK cycles for the SDLE active time" hexmask.long.word 0x00 0.--11. 1. "LINE_SYNC,Number of PIXCLK cycles for line sync duration" group.long 0x264++0x03 line.long 0x00 "EPDC_TCE_HSCAN1_SET,EPDC Timing Control Engine Horizontal Timing Register 1" hexmask.long.word 0x00 16.--27. 1. "LINE_SYNC_WIDTH,Number of PIXCLK cycles for the SDLE active time" hexmask.long.word 0x00 0.--11. 1. "LINE_SYNC,Number of PIXCLK cycles for line sync duration" group.long 0x268++0x03 line.long 0x00 "EPDC_TCE_HSCAN1_CLR,EPDC Timing Control Engine Horizontal Timing Register 1" hexmask.long.word 0x00 16.--27. 1. "LINE_SYNC_WIDTH,Number of PIXCLK cycles for the SDLE active time" hexmask.long.word 0x00 0.--11. 1. "LINE_SYNC,Number of PIXCLK cycles for line sync duration" group.long 0x26C++0x03 line.long 0x00 "EPDC_TCE_HSCAN1_TOG,EPDC Timing Control Engine Horizontal Timing Register 1" hexmask.long.word 0x00 16.--27. 1. "LINE_SYNC_WIDTH,Number of PIXCLK cycles for the SDLE active time" hexmask.long.word 0x00 0.--11. 1. "LINE_SYNC,Number of PIXCLK cycles for line sync duration" group.long 0x280++0x03 line.long 0x00 "EPDC_TCE_HSCAN2,EPDC Timing Control Engine Horizontal Timing Register 2" hexmask.long.word 0x00 16.--27. 1. "LINE_END,Number of PIXCLK cycles for line end duration" hexmask.long.word 0x00 0.--11. 1. "LINE_BEGIN,Number of PIXCLK cycles for line begin duration" group.long 0x284++0x03 line.long 0x00 "EPDC_TCE_HSCAN2_SET,EPDC Timing Control Engine Horizontal Timing Register 2" hexmask.long.word 0x00 16.--27. 1. "LINE_END,Number of PIXCLK cycles for line end duration" hexmask.long.word 0x00 0.--11. 1. "LINE_BEGIN,Number of PIXCLK cycles for line begin duration" group.long 0x288++0x03 line.long 0x00 "EPDC_TCE_HSCAN2_CLR,EPDC Timing Control Engine Horizontal Timing Register 2" hexmask.long.word 0x00 16.--27. 1. "LINE_END,Number of PIXCLK cycles for line end duration" hexmask.long.word 0x00 0.--11. 1. "LINE_BEGIN,Number of PIXCLK cycles for line begin duration" group.long 0x28C++0x03 line.long 0x00 "EPDC_TCE_HSCAN2_TOG,EPDC Timing Control Engine Horizontal Timing Register 2" hexmask.long.word 0x00 16.--27. 1. "LINE_END,Number of PIXCLK cycles for line end duration" hexmask.long.word 0x00 0.--11. 1. "LINE_BEGIN,Number of PIXCLK cycles for line begin duration" group.long 0x2A0++0x03 line.long 0x00 "EPDC_TCE_VSCAN,EPDC Timing Control Engine Vertical Timing Register" hexmask.long.byte 0x00 16.--23. 1. "FRAME_END,Number of lines for frame end duration" hexmask.long.byte 0x00 8.--15. 1. "FRAME_BEGIN,Number of lines for frame begin duration" newline hexmask.long.byte 0x00 0.--7. 1. "FRAME_SYNC,Number of lines for frame sync duration" group.long 0x2A4++0x03 line.long 0x00 "EPDC_TCE_VSCAN_SET,EPDC Timing Control Engine Vertical Timing Register" hexmask.long.byte 0x00 16.--23. 1. "FRAME_END,Number of lines for frame end duration" hexmask.long.byte 0x00 8.--15. 1. "FRAME_BEGIN,Number of lines for frame begin duration" newline hexmask.long.byte 0x00 0.--7. 1. "FRAME_SYNC,Number of lines for frame sync duration" group.long 0x2A8++0x03 line.long 0x00 "EPDC_TCE_VSCAN_CLR,EPDC Timing Control Engine Vertical Timing Register" hexmask.long.byte 0x00 16.--23. 1. "FRAME_END,Number of lines for frame end duration" hexmask.long.byte 0x00 8.--15. 1. "FRAME_BEGIN,Number of lines for frame begin duration" newline hexmask.long.byte 0x00 0.--7. 1. "FRAME_SYNC,Number of lines for frame sync duration" group.long 0x2AC++0x03 line.long 0x00 "EPDC_TCE_VSCAN_TOG,EPDC Timing Control Engine Vertical Timing Register" hexmask.long.byte 0x00 16.--23. 1. "FRAME_END,Number of lines for frame end duration" hexmask.long.byte 0x00 8.--15. 1. "FRAME_BEGIN,Number of lines for frame begin duration" newline hexmask.long.byte 0x00 0.--7. 1. "FRAME_SYNC,Number of lines for frame sync duration" group.long 0x2C0++0x03 line.long 0x00 "EPDC_TCE_OE,EPDC Timing Control Engine OE timing control Register" hexmask.long.byte 0x00 24.--31. 1. "SDOED_WIDTH,Number of PIXCLK cycles from SDOED high to SDOED falling (Must be greater than 0)" hexmask.long.byte 0x00 16.--23. 1. "SDOED_DLY,Number of PIXCLK cycles from SDOEZ low to SDOED rising (Must be greater than 0)" newline hexmask.long.byte 0x00 8.--15. 1. "SDOEZ_WIDTH,Number of PIXCLK cycles from SDOEZ high to SDOEZ falling (Must be greater than 0)" hexmask.long.byte 0x00 0.--7. 1. "SDOEZ_DLY,Number of PIXCLK cycles from SDLE falling edge to SDOEZ rising (Must be greater than 0)" group.long 0x2C4++0x03 line.long 0x00 "EPDC_TCE_OE_SET,EPDC Timing Control Engine OE timing control Register" hexmask.long.byte 0x00 24.--31. 1. "SDOED_WIDTH,Number of PIXCLK cycles from SDOED high to SDOED falling (Must be greater than 0)" hexmask.long.byte 0x00 16.--23. 1. "SDOED_DLY,Number of PIXCLK cycles from SDOEZ low to SDOED rising (Must be greater than 0)" newline hexmask.long.byte 0x00 8.--15. 1. "SDOEZ_WIDTH,Number of PIXCLK cycles from SDOEZ high to SDOEZ falling (Must be greater than 0)" hexmask.long.byte 0x00 0.--7. 1. "SDOEZ_DLY,Number of PIXCLK cycles from SDLE falling edge to SDOEZ rising (Must be greater than 0)" group.long 0x2C8++0x03 line.long 0x00 "EPDC_TCE_OE_CLR,EPDC Timing Control Engine OE timing control Register" hexmask.long.byte 0x00 24.--31. 1. "SDOED_WIDTH,Number of PIXCLK cycles from SDOED high to SDOED falling (Must be greater than 0)" hexmask.long.byte 0x00 16.--23. 1. "SDOED_DLY,Number of PIXCLK cycles from SDOEZ low to SDOED rising (Must be greater than 0)" newline hexmask.long.byte 0x00 8.--15. 1. "SDOEZ_WIDTH,Number of PIXCLK cycles from SDOEZ high to SDOEZ falling (Must be greater than 0)" hexmask.long.byte 0x00 0.--7. 1. "SDOEZ_DLY,Number of PIXCLK cycles from SDLE falling edge to SDOEZ rising (Must be greater than 0)" group.long 0x2CC++0x03 line.long 0x00 "EPDC_TCE_OE_TOG,EPDC Timing Control Engine OE timing control Register" hexmask.long.byte 0x00 24.--31. 1. "SDOED_WIDTH,Number of PIXCLK cycles from SDOED high to SDOED falling (Must be greater than 0)" hexmask.long.byte 0x00 16.--23. 1. "SDOED_DLY,Number of PIXCLK cycles from SDOEZ low to SDOED rising (Must be greater than 0)" newline hexmask.long.byte 0x00 8.--15. 1. "SDOEZ_WIDTH,Number of PIXCLK cycles from SDOEZ high to SDOEZ falling (Must be greater than 0)" hexmask.long.byte 0x00 0.--7. 1. "SDOEZ_DLY,Number of PIXCLK cycles from SDLE falling edge to SDOEZ rising (Must be greater than 0)" group.long 0x2E0++0x03 line.long 0x00 "EPDC_TCE_POLARITY,EPDC Timing Control Engine Driver Polarity Register" bitfld.long 0x00 4. "GDSP_POL," "0,1" bitfld.long 0x00 3. "GDOE_POL," "0,1" newline bitfld.long 0x00 2. "SDOE_POL," "0,1" bitfld.long 0x00 1. "SDLE_POL," "0,1" newline bitfld.long 0x00 0. "SDCE_POL," "0,1" group.long 0x2E4++0x03 line.long 0x00 "EPDC_TCE_POLARITY_SET,EPDC Timing Control Engine Driver Polarity Register" bitfld.long 0x00 4. "GDSP_POL," "0,1" bitfld.long 0x00 3. "GDOE_POL," "0,1" newline bitfld.long 0x00 2. "SDOE_POL," "0,1" bitfld.long 0x00 1. "SDLE_POL," "0,1" newline bitfld.long 0x00 0. "SDCE_POL," "0,1" group.long 0x2E8++0x03 line.long 0x00 "EPDC_TCE_POLARITY_CLR,EPDC Timing Control Engine Driver Polarity Register" eventfld.long 0x00 4. "GDSP_POL," "0,1" eventfld.long 0x00 3. "GDOE_POL," "0,1" newline eventfld.long 0x00 2. "SDOE_POL," "0,1" eventfld.long 0x00 1. "SDLE_POL," "0,1" newline eventfld.long 0x00 0. "SDCE_POL," "0,1" group.long 0x2EC++0x03 line.long 0x00 "EPDC_TCE_POLARITY_TOG,EPDC Timing Control Engine Driver Polarity Register" bitfld.long 0x00 4. "GDSP_POL," "0,1" bitfld.long 0x00 3. "GDOE_POL," "0,1" newline bitfld.long 0x00 2. "SDOE_POL," "0,1" bitfld.long 0x00 1. "SDLE_POL," "0,1" newline bitfld.long 0x00 0. "SDCE_POL," "0,1" group.long 0x300++0x03 line.long 0x00 "EPDC_TCE_TIMING1,EPDC Timing Control Engine Timing Register 1" bitfld.long 0x00 4.--5. "SDLE_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 3 PIXCLK cycles" "0: No shift of SDLE,1: Shift SDLE 1 pixclk cycle,2: Shift SDLE 2 pixclk cycles,3: Shift SDLE 3 pixclk cycles" bitfld.long 0x00 3. "SDCLK_INVERT,Invert phase of SDCLK" "0,1" newline bitfld.long 0x00 0.--1. "SDCLK_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 4 cycles" "0: No shift of SDCLK,1: Shift SDCLK 1 pixclk cycle,2: Shift SDCLK 2 pixclk cycles,3: Shift SDCLK 3 pixclk cycles" group.long 0x304++0x03 line.long 0x00 "EPDC_TCE_TIMING1_SET,EPDC Timing Control Engine Timing Register 1" bitfld.long 0x00 4.--5. "SDLE_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 3 PIXCLK cycles" "0,1,2,3" bitfld.long 0x00 3. "SDCLK_INVERT,Invert phase of SDCLK" "0,1" newline bitfld.long 0x00 0.--1. "SDCLK_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 4 cycles" "0,1,2,3" group.long 0x308++0x03 line.long 0x00 "EPDC_TCE_TIMING1_CLR,EPDC Timing Control Engine Timing Register 1" eventfld.long 0x00 4.--5. "SDLE_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 3 PIXCLK cycles" "0,1,2,3" eventfld.long 0x00 3. "SDCLK_INVERT,Invert phase of SDCLK" "0,1" newline eventfld.long 0x00 0.--1. "SDCLK_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 4 cycles" "0,1,2,3" group.long 0x30C++0x03 line.long 0x00 "EPDC_TCE_TIMING1_TOG,EPDC Timing Control Engine Timing Register 1" bitfld.long 0x00 4.--5. "SDLE_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 3 PIXCLK cycles" "0,1,2,3" bitfld.long 0x00 3. "SDCLK_INVERT,Invert phase of SDCLK" "0,1" newline bitfld.long 0x00 0.--1. "SDCLK_SHIFT,This register can be used to implement additional timing setup/hold adjustment of source driver signals by adjusting the SDCLK up to 4 cycles" "0,1,2,3" group.long 0x310++0x03 line.long 0x00 "EPDC_TCE_TIMING2,EPDC Timing Control Engine Timing Register 2" hexmask.long.word 0x00 16.--31. 1. "GDCLK_HP,This register controls the GDCLK high-pulse width" hexmask.long.word 0x00 0.--15. 1. "GDSP_OFFSET,This register allows the user to shift the GDSP pulse by N PIXCLKs where N=1 to 65535" group.long 0x314++0x03 line.long 0x00 "EPDC_TCE_TIMING2_SET,EPDC Timing Control Engine Timing Register 2" hexmask.long.word 0x00 16.--31. 1. "GDCLK_HP,This register controls the GDCLK high-pulse width" hexmask.long.word 0x00 0.--15. 1. "GDSP_OFFSET,This register allows the user to shift the GDSP pulse by N PIXCLKs where N=1 to 65535" group.long 0x318++0x03 line.long 0x00 "EPDC_TCE_TIMING2_CLR,EPDC Timing Control Engine Timing Register 2" hexmask.long.word 0x00 16.--31. 1. "GDCLK_HP,This register controls the GDCLK high-pulse width" hexmask.long.word 0x00 0.--15. 1. "GDSP_OFFSET,This register allows the user to shift the GDSP pulse by N PIXCLKs where N=1 to 65535" group.long 0x31C++0x03 line.long 0x00 "EPDC_TCE_TIMING2_TOG,EPDC Timing Control Engine Timing Register 2" hexmask.long.word 0x00 16.--31. 1. "GDCLK_HP,This register controls the GDCLK high-pulse width" hexmask.long.word 0x00 0.--15. 1. "GDSP_OFFSET,This register allows the user to shift the GDSP pulse by N PIXCLKs where N=1 to 65535" group.long 0x320++0x03 line.long 0x00 "EPDC_TCE_TIMING3,EPDC Timing Control Engine Timing Register 3" hexmask.long.word 0x00 16.--31. 1. "GDOE_OFFSET,When using GDOE_MODE=1 this register sets the delay from GDCLK to the GDOE in terms of N PIXCLK cycles" hexmask.long.word 0x00 0.--15. 1. "GDCLK_OFFSET,This register allows the user to shift the GDCLK from the line time by N PIXCLK cycles" group.long 0x324++0x03 line.long 0x00 "EPDC_TCE_TIMING3_SET,EPDC Timing Control Engine Timing Register 3" hexmask.long.word 0x00 16.--31. 1. "GDOE_OFFSET,When using GDOE_MODE=1 this register sets the delay from GDCLK to the GDOE in terms of N PIXCLK cycles" hexmask.long.word 0x00 0.--15. 1. "GDCLK_OFFSET,This register allows the user to shift the GDCLK from the line time by N PIXCLK cycles" group.long 0x328++0x03 line.long 0x00 "EPDC_TCE_TIMING3_CLR,EPDC Timing Control Engine Timing Register 3" hexmask.long.word 0x00 16.--31. 1. "GDOE_OFFSET,When using GDOE_MODE=1 this register sets the delay from GDCLK to the GDOE in terms of N PIXCLK cycles" hexmask.long.word 0x00 0.--15. 1. "GDCLK_OFFSET,This register allows the user to shift the GDCLK from the line time by N PIXCLK cycles" group.long 0x32C++0x03 line.long 0x00 "EPDC_TCE_TIMING3_TOG,EPDC Timing Control Engine Timing Register 3" hexmask.long.word 0x00 16.--31. 1. "GDOE_OFFSET,When using GDOE_MODE=1 this register sets the delay from GDCLK to the GDOE in terms of N PIXCLK cycles" hexmask.long.word 0x00 0.--15. 1. "GDCLK_OFFSET,This register allows the user to shift the GDCLK from the line time by N PIXCLK cycles" group.long 0x380++0x03 line.long 0x00 "EPDC_PIGEON_CTRL0,EPDC Pigeon Mode Control Register 0" hexmask.long.word 0x00 16.--27. 1. "LD_PERIOD,period of pclk counter during LD phase" hexmask.long.word 0x00 0.--11. 1. "FD_PERIOD,period of line counter during FD phase" group.long 0x384++0x03 line.long 0x00 "EPDC_PIGEON_CTRL0_SET,EPDC Pigeon Mode Control Register 0" hexmask.long.word 0x00 16.--27. 1. "LD_PERIOD,period of pclk counter during LD phase" hexmask.long.word 0x00 0.--11. 1. "FD_PERIOD,period of line counter during FD phase" group.long 0x388++0x03 line.long 0x00 "EPDC_PIGEON_CTRL0_CLR,EPDC Pigeon Mode Control Register 0" hexmask.long.word 0x00 16.--27. 1. "LD_PERIOD,period of pclk counter during LD phase" hexmask.long.word 0x00 0.--11. 1. "FD_PERIOD,period of line counter during FD phase" group.long 0x38C++0x03 line.long 0x00 "EPDC_PIGEON_CTRL0_TOG,EPDC Pigeon Mode Control Register 0" hexmask.long.word 0x00 16.--27. 1. "LD_PERIOD,period of pclk counter during LD phase" hexmask.long.word 0x00 0.--11. 1. "FD_PERIOD,period of line counter during FD phase" group.long 0x390++0x03 line.long 0x00 "EPDC_PIGEON_CTRL1,EPDC Pigeon Mode Control Register 1" hexmask.long.word 0x00 16.--27. 1. "FRAME_CNT_CYCLES,max cycles of frame counter" hexmask.long.word 0x00 0.--11. 1. "FRAME_CNT_PERIOD,period of frame counter" group.long 0x394++0x03 line.long 0x00 "EPDC_PIGEON_CTRL1_SET,EPDC Pigeon Mode Control Register 1" hexmask.long.word 0x00 16.--27. 1. "FRAME_CNT_CYCLES,max cycles of frame counter" hexmask.long.word 0x00 0.--11. 1. "FRAME_CNT_PERIOD,period of frame counter" group.long 0x398++0x03 line.long 0x00 "EPDC_PIGEON_CTRL1_CLR,EPDC Pigeon Mode Control Register 1" hexmask.long.word 0x00 16.--27. 1. "FRAME_CNT_CYCLES,max cycles of frame counter" hexmask.long.word 0x00 0.--11. 1. "FRAME_CNT_PERIOD,period of frame counter" group.long 0x39C++0x03 line.long 0x00 "EPDC_PIGEON_CTRL1_TOG,EPDC Pigeon Mode Control Register 1" hexmask.long.word 0x00 16.--27. 1. "FRAME_CNT_CYCLES,max cycles of frame counter" hexmask.long.word 0x00 0.--11. 1. "FRAME_CNT_PERIOD,period of frame counter" group.long 0x3C0++0x03 line.long 0x00 "EPDC_IRQ_MASK1,EPDC IRQ Mask Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT0~31 Complete Interrupt Enable" group.long 0x3C4++0x03 line.long 0x00 "EPDC_IRQ_MASK1_SET,EPDC IRQ Mask Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT0~31 Complete Interrupt Enable" group.long 0x3C8++0x03 line.long 0x00 "EPDC_IRQ_MASK1_CLR,EPDC IRQ Mask Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT0~31 Complete Interrupt Enable" group.long 0x3CC++0x03 line.long 0x00 "EPDC_IRQ_MASK1_TOG,EPDC IRQ Mask Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT0~31 Complete Interrupt Enable" group.long 0x3D0++0x03 line.long 0x00 "EPDC_IRQ_MASK2,EPDC IRQ Mask Register for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT32~64 Complete Interrupt Enable" group.long 0x3D4++0x03 line.long 0x00 "EPDC_IRQ_MASK2_SET,EPDC IRQ Mask Register for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT32~64 Complete Interrupt Enable" group.long 0x3D8++0x03 line.long 0x00 "EPDC_IRQ_MASK2_CLR,EPDC IRQ Mask Register for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT32~64 Complete Interrupt Enable" group.long 0x3DC++0x03 line.long 0x00 "EPDC_IRQ_MASK2_TOG,EPDC IRQ Mask Register for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ_EN,LUT32~64 Complete Interrupt Enable" group.long 0x3E0++0x03 line.long 0x00 "EPDC_IRQ1,EPDC Interrupt Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 0~31 Complete Interrupt" group.long 0x3E4++0x03 line.long 0x00 "EPDC_IRQ1_SET,EPDC Interrupt Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 0~31 Complete Interrupt" group.long 0x3E8++0x03 line.long 0x00 "EPDC_IRQ1_CLR,EPDC Interrupt Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 0~31 Complete Interrupt" group.long 0x3EC++0x03 line.long 0x00 "EPDC_IRQ1_TOG,EPDC Interrupt Register for LUT 0~31" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 0~31 Complete Interrupt" group.long 0x3F0++0x03 line.long 0x00 "EPDC_IRQ2,EPDC Interrupt Registerr for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 32~64 Complete Interrupt" group.long 0x3F4++0x03 line.long 0x00 "EPDC_IRQ2_SET,EPDC Interrupt Registerr for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 32~64 Complete Interrupt" group.long 0x3F8++0x03 line.long 0x00 "EPDC_IRQ2_CLR,EPDC Interrupt Registerr for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 32~64 Complete Interrupt" group.long 0x3FC++0x03 line.long 0x00 "EPDC_IRQ2_TOG,EPDC Interrupt Registerr for LUT 32~63" hexmask.long 0x00 0.--31. 1. "LUTN_CMPLT_IRQ,LUT 32~64 Complete Interrupt" group.long 0x400++0x03 line.long 0x00 "EPDC_IRQ_MASK,EPDC IRQ Mask Register" bitfld.long 0x00 23. "PWR_IRQ_EN,Enable power interrupt" "0,1" bitfld.long 0x00 22. "UPD_DONE_IRQ_EN,Enable UPD complete interrupt" "0,1" newline bitfld.long 0x00 21. "TCE_IDLE_IRQ_EN,Enable TCE Idle interrupt detection" "0,1" bitfld.long 0x00 20. "BUS_ERROR_IRQ_EN,Enable AXI BUS ERROR interrupt detection" "0,1" newline bitfld.long 0x00 19. "FRAME_END_IRQ_EN,If this bit is set EPDC will assert the current frame end interrupt" "0,1" bitfld.long 0x00 18. "TCE_UNDERRUN_IRQ_EN,Enable pixel FIFO under-run condition detection" "0,1" newline bitfld.long 0x00 17. "COL_IRQ_EN,Enable collision detection interrupts for all LUTs" "0,1" bitfld.long 0x00 16. "WB_CMPLT_IRQ_EN,Enable WB complete interrupt" "0,1" group.long 0x404++0x03 line.long 0x00 "EPDC_IRQ_MASK_SET,EPDC IRQ Mask Register" bitfld.long 0x00 23. "PWR_IRQ_EN,Enable power interrupt" "0,1" bitfld.long 0x00 22. "UPD_DONE_IRQ_EN,Enable UPD complete interrupt" "0,1" newline bitfld.long 0x00 21. "TCE_IDLE_IRQ_EN,Enable TCE Idle interrupt detection" "0,1" bitfld.long 0x00 20. "BUS_ERROR_IRQ_EN,Enable AXI BUS ERROR interrupt detection" "0,1" newline bitfld.long 0x00 19. "FRAME_END_IRQ_EN,If this bit is set EPDC will assert the current frame end interrupt" "0,1" bitfld.long 0x00 18. "TCE_UNDERRUN_IRQ_EN,Enable pixel FIFO under-run condition detection" "0,1" newline bitfld.long 0x00 17. "COL_IRQ_EN,Enable collision detection interrupts for all LUTs" "0,1" bitfld.long 0x00 16. "WB_CMPLT_IRQ_EN,Enable WB complete interrupt" "0,1" group.long 0x408++0x03 line.long 0x00 "EPDC_IRQ_MASK_CLR,EPDC IRQ Mask Register" eventfld.long 0x00 23. "PWR_IRQ_EN,Enable power interrupt" "0,1" eventfld.long 0x00 22. "UPD_DONE_IRQ_EN,Enable UPD complete interrupt" "0,1" newline eventfld.long 0x00 21. "TCE_IDLE_IRQ_EN,Enable TCE Idle interrupt detection" "0,1" eventfld.long 0x00 20. "BUS_ERROR_IRQ_EN,Enable AXI BUS ERROR interrupt detection" "0,1" newline eventfld.long 0x00 19. "FRAME_END_IRQ_EN,If this bit is set EPDC will assert the current frame end interrupt" "0,1" eventfld.long 0x00 18. "TCE_UNDERRUN_IRQ_EN,Enable pixel FIFO under-run condition detection" "0,1" newline eventfld.long 0x00 17. "COL_IRQ_EN,Enable collision detection interrupts for all LUTs" "0,1" eventfld.long 0x00 16. "WB_CMPLT_IRQ_EN,Enable WB complete interrupt" "0,1" group.long 0x40C++0x03 line.long 0x00 "EPDC_IRQ_MASK_TOG,EPDC IRQ Mask Register" bitfld.long 0x00 23. "PWR_IRQ_EN,Enable power interrupt" "0,1" bitfld.long 0x00 22. "UPD_DONE_IRQ_EN,Enable UPD complete interrupt" "0,1" newline bitfld.long 0x00 21. "TCE_IDLE_IRQ_EN,Enable TCE Idle interrupt detection" "0,1" bitfld.long 0x00 20. "BUS_ERROR_IRQ_EN,Enable AXI BUS ERROR interrupt detection" "0,1" newline bitfld.long 0x00 19. "FRAME_END_IRQ_EN,If this bit is set EPDC will assert the current frame end interrupt" "0,1" bitfld.long 0x00 18. "TCE_UNDERRUN_IRQ_EN,Enable pixel FIFO under-run condition detection" "0,1" newline bitfld.long 0x00 17. "COL_IRQ_EN,Enable collision detection interrupts for all LUTs" "0,1" bitfld.long 0x00 16. "WB_CMPLT_IRQ_EN,Enable WB complete interrupt" "0,1" group.long 0x420++0x03 line.long 0x00 "EPDC_IRQ,EPDC Interrupt Register" eventfld.long 0x00 23. "PWR_IRQ,Power Interrupt" "0,1" eventfld.long 0x00 22. "UPD_DONE_IRQ,Working buffer process complete Interrupt" "0,1" newline eventfld.long 0x00 21. "TCE_IDLE_IRQ,Interrupt to indicate that the TCE has completed TFT frame scans and is in an idle state" "0,1" eventfld.long 0x00 20. "BUS_ERROR_IRQ,Interrupt to indicate AXI BUS error occurs" "0,1" newline eventfld.long 0x00 19. "FRAME_END_IRQ,Interrupt to indicate EPDC has completed the current frame and is in the vertical blanking period" "0,1" eventfld.long 0x00 18. "TCE_UNDERRUN_IRQ,Interrupt to indicate that a pixel FIFO under-run has occured" "0,1" newline eventfld.long 0x00 17. "LUT_COL_IRQ,Collision detection interrupt" "0,1" eventfld.long 0x00 16. "WB_CMPLT_IRQ,Working buffer process complete Interrupt" "0,1" group.long 0x424++0x03 line.long 0x00 "EPDC_IRQ_SET,EPDC Interrupt Register" bitfld.long 0x00 23. "PWR_IRQ,Power Interrupt" "0,1" bitfld.long 0x00 22. "UPD_DONE_IRQ,Working buffer process complete Interrupt" "0,1" newline bitfld.long 0x00 21. "TCE_IDLE_IRQ,Interrupt to indicate that the TCE has completed TFT frame scans and is in an idle state" "0,1" bitfld.long 0x00 20. "BUS_ERROR_IRQ,Interrupt to indicate AXI BUS error occurs" "0,1" newline bitfld.long 0x00 19. "FRAME_END_IRQ,Interrupt to indicate EPDC has completed the current frame and is in the vertical blanking period" "0,1" bitfld.long 0x00 18. "TCE_UNDERRUN_IRQ,Interrupt to indicate that a pixel FIFO under-run has occured" "0,1" newline bitfld.long 0x00 17. "LUT_COL_IRQ,Collision detection interrupt" "0,1" bitfld.long 0x00 16. "WB_CMPLT_IRQ,Working buffer process complete Interrupt" "0,1" group.long 0x428++0x03 line.long 0x00 "EPDC_IRQ_CLR,EPDC Interrupt Register" eventfld.long 0x00 23. "PWR_IRQ,Power Interrupt" "0,1" eventfld.long 0x00 22. "UPD_DONE_IRQ,Working buffer process complete Interrupt" "0,1" newline eventfld.long 0x00 21. "TCE_IDLE_IRQ,Interrupt to indicate that the TCE has completed TFT frame scans and is in an idle state" "0,1" eventfld.long 0x00 20. "BUS_ERROR_IRQ,Interrupt to indicate AXI BUS error occurs" "0,1" newline eventfld.long 0x00 19. "FRAME_END_IRQ,Interrupt to indicate EPDC has completed the current frame and is in the vertical blanking period" "0,1" eventfld.long 0x00 18. "TCE_UNDERRUN_IRQ,Interrupt to indicate that a pixel FIFO under-run has occured" "0,1" newline eventfld.long 0x00 17. "LUT_COL_IRQ,Collision detection interrupt" "0,1" eventfld.long 0x00 16. "WB_CMPLT_IRQ,Working buffer process complete Interrupt" "0,1" group.long 0x42C++0x03 line.long 0x00 "EPDC_IRQ_TOG,EPDC Interrupt Register" bitfld.long 0x00 23. "PWR_IRQ,Power Interrupt" "0,1" bitfld.long 0x00 22. "UPD_DONE_IRQ,Working buffer process complete Interrupt" "0,1" newline bitfld.long 0x00 21. "TCE_IDLE_IRQ,Interrupt to indicate that the TCE has completed TFT frame scans and is in an idle state" "0,1" bitfld.long 0x00 20. "BUS_ERROR_IRQ,Interrupt to indicate AXI BUS error occurs" "0,1" newline bitfld.long 0x00 19. "FRAME_END_IRQ,Interrupt to indicate EPDC has completed the current frame and is in the vertical blanking period" "0,1" bitfld.long 0x00 18. "TCE_UNDERRUN_IRQ,Interrupt to indicate that a pixel FIFO under-run has occured" "0,1" newline bitfld.long 0x00 17. "LUT_COL_IRQ,Collision detection interrupt" "0,1" bitfld.long 0x00 16. "WB_CMPLT_IRQ,Working buffer process complete Interrupt" "0,1" rgroup.long 0x440++0x03 line.long 0x00 "EPDC_STATUS_LUTS1,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 0~31 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x444++0x03 line.long 0x00 "EPDC_STATUS_LUTS1_SET,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 0~31 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x448++0x03 line.long 0x00 "EPDC_STATUS_LUTS1_CLR,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 0~31 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x44C++0x03 line.long 0x00 "EPDC_STATUS_LUTS1_TOG,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 0~31 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x450++0x03 line.long 0x00 "EPDC_STATUS_LUTS2,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 32~63 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x454++0x03 line.long 0x00 "EPDC_STATUS_LUTS2_SET,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 32~63 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x458++0x03 line.long 0x00 "EPDC_STATUS_LUTS2_CLR,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 32~63 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x45C++0x03 line.long 0x00 "EPDC_STATUS_LUTS2_TOG,EPDC Status Register - LUTs" abitfld.long 0x00 0.--31. "LUTN_STS,LUT 32~63 Status" "0x00000000=0: IDLE,0x00000001=1: ACTIVE" rgroup.long 0x460++0x03 line.long 0x00 "EPDC_STATUS_NEXTLUT,EPDC Status Register - Next Available LUT" bitfld.long 0x00 8. "NEXT_LUT_VALID,This bitfield can be used to check against a LUTs full condition" "0,1" bitfld.long 0x00 0.--5. "NEXT_LUT,Next available LUT value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x480++0x03 line.long 0x00 "EPDC_STATUS_COL1,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x484++0x03 line.long 0x00 "EPDC_STATUS_COL1_SET,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x488++0x03 line.long 0x00 "EPDC_STATUS_COL1_CLR,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x48C++0x03 line.long 0x00 "EPDC_STATUS_COL1_TOG,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x490++0x03 line.long 0x00 "EPDC_STATUS_COL2,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x494++0x03 line.long 0x00 "EPDC_STATUS_COL2_SET,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x498++0x03 line.long 0x00 "EPDC_STATUS_COL2_CLR,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" rgroup.long 0x49C++0x03 line.long 0x00 "EPDC_STATUS_COL2_TOG,EPDC LUT Collision Status" hexmask.long 0x00 0.--31. 1. "LUTN_COL_STS,LUTn Collision Status" group.long 0x4A0++0x03 line.long 0x00 "EPDC_STATUS,EPDC General Status Register" bitfld.long 0x00 16.--20. "HISTOGRAM_CP,Indicates which histogram matched the existing bitmap(CP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 8.--12. "HISTOGRAM_NP,Indicates which histogram matched the processed bitmap(NP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 3. "UPD_VOID,Indicates that the update buffer is void" "0,1" rbitfld.long 0x00 2. "LUTS_UNDERRUN,Provides a summary status of LUT fill" "0,1" newline rbitfld.long 0x00 1. "LUTS_BUSY,Provides a summary status of LUTs" "0: LUTs are available,1: All LUTs are busy" rbitfld.long 0x00 0. "WB_BUSY,Working buffer process is busy cannot accept new update requests" "0,1" group.long 0x4A4++0x03 line.long 0x00 "EPDC_STATUS_SET,EPDC General Status Register" bitfld.long 0x00 16.--20. "HISTOGRAM_CP,Indicates which histogram matched the existing bitmap(CP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 8.--12. "HISTOGRAM_NP,Indicates which histogram matched the processed bitmap(NP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 3. "UPD_VOID,Indicates that the update buffer is void" "0,1" rbitfld.long 0x00 2. "LUTS_UNDERRUN,Provides a summary status of LUT fill" "0,1" newline rbitfld.long 0x00 1. "LUTS_BUSY,Provides a summary status of LUTs" "0: LUTs are available,1: All LUTs are busy" rbitfld.long 0x00 0. "WB_BUSY,Working buffer process is busy cannot accept new update requests" "0,1" group.long 0x4A8++0x03 line.long 0x00 "EPDC_STATUS_CLR,EPDC General Status Register" eventfld.long 0x00 16.--20. "HISTOGRAM_CP,Indicates which histogram matched the existing bitmap(CP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" eventfld.long 0x00 8.--12. "HISTOGRAM_NP,Indicates which histogram matched the processed bitmap(NP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 3. "UPD_VOID,Indicates that the update buffer is void" "0,1" eventfld.long 0x00 2. "LUTS_UNDERRUN,Provides a summary status of LUT fill" "0,1" newline eventfld.long 0x00 1. "LUTS_BUSY,Provides a summary status of LUTs" "0: LUTs are available,1: All LUTs are busy" eventfld.long 0x00 0. "WB_BUSY,Working buffer process is busy cannot accept new update requests" "0,1" group.long 0x4AC++0x03 line.long 0x00 "EPDC_STATUS_TOG,EPDC General Status Register" bitfld.long 0x00 16.--20. "HISTOGRAM_CP,Indicates which histogram matched the existing bitmap(CP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 8.--12. "HISTOGRAM_NP,Indicates which histogram matched the processed bitmap(NP)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 3. "UPD_VOID,Indicates that the update buffer is void" "0,1" rbitfld.long 0x00 2. "LUTS_UNDERRUN,Provides a summary status of LUT fill" "0,1" newline rbitfld.long 0x00 1. "LUTS_BUSY,Provides a summary status of LUTs" "0: LUTs are available,1: All LUTs are busy" rbitfld.long 0x00 0. "WB_BUSY,Working buffer process is busy cannot accept new update requests" "0,1" rgroup.long 0x4C0++0x03 line.long 0x00 "EPDC_UPD_COL_CORD,EPDC Collision Region Co-ordinate" hexmask.long.word 0x00 16.--28. 1. "YCORD,Y co-ordinate for collision region of the latest completed update" hexmask.long.word 0x00 0.--12. 1. "XCORD,X co-ordinate for collision region of the latest completed update" rgroup.long 0x4E0++0x03 line.long 0x00 "EPDC_UPD_COL_SIZE,EPDC Collision Region Size" hexmask.long.word 0x00 16.--28. 1. "HEIGHT,Height (in pixels)" hexmask.long.word 0x00 0.--12. 1. "WIDTH,Width (in pixels)" group.long 0x600++0x03 line.long 0x00 "EPDC_HIST1_PARAM,1-level Histogram Parameter Register" bitfld.long 0x00 0.--4. "VALUE0,value for 1-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x610++0x03 line.long 0x00 "EPDC_HIST2_PARAM,2-level Histogram Parameter Register" bitfld.long 0x00 8.--12. "VALUE1,White value for 2-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE0,Black value for 2-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x620++0x03 line.long 0x00 "EPDC_HIST4_PARAM,4-level Histogram Parameter Register" bitfld.long 0x00 24.--28. "VALUE3,GRAY3 (White) value for 4-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE2,GRAY2 value for 4-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE1,GRAY1 value for 4-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE0,GRAY0 (Black) value for 4-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x630++0x03 line.long 0x00 "EPDC_HIST8_PARAM0,8-level Histogram Parameter 0 Register" bitfld.long 0x00 24.--28. "VALUE3,GRAY3 value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE2,GRAY2 value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE1,GRAY1 value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE0,GRAY0 (Black) value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x640++0x03 line.long 0x00 "EPDC_HIST8_PARAM1,8-level Histogram Parameter 1 Register" bitfld.long 0x00 24.--28. "VALUE7,GRAY7 (White) value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE6,GRAY6 value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE5,GRAY5 value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE4,GRAY4 value for 8-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x650++0x03 line.long 0x00 "EPDC_HIST16_PARAM0,16-level Histogram Parameter 0 Register" bitfld.long 0x00 24.--28. "VALUE3,GRAY3 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE2,GRAY2 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE1,GRAY1 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE0,GRAY0 (Black) value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x660++0x03 line.long 0x00 "EPDC_HIST16_PARAM1,16-level Histogram Parameter Register" bitfld.long 0x00 24.--28. "VALUE7,GRAY7 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE6,GRAY6 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE5,GRAY5 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE4,GRAY4 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x670++0x03 line.long 0x00 "EPDC_HIST16_PARAM2,16-level Histogram Parameter Register" bitfld.long 0x00 24.--28. "VALUE11,GRAY11 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE10,GRAY10 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE9,GRAY9 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE8,GRAY8 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x680++0x03 line.long 0x00 "EPDC_HIST16_PARAM3,16-level Histogram Parameter Register" bitfld.long 0x00 24.--28. "VALUE15,GRAY15 (White) value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "VALUE14,GRAY14 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "VALUE13,GRAY13 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "VALUE12,GRAY12 value for 16-level histogram" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x700++0x03 line.long 0x00 "EPDC_GPIO,EPDC General Purpose I/O Debug register" rbitfld.long 0x00 8. "PWRSTAT,reflect ipp_epdc_pwrstat input" "0,1" bitfld.long 0x00 7. "PWRWAKE,Controls ipp_epdc_pwrwake output" "0,1" newline bitfld.long 0x00 6. "PWRCOM,Controls ipp_epdc_pwrcom output" "0,1" bitfld.long 0x00 2.--5. "PWRCTRL,Controls ipp_epdc_pwrctrl[3:0] output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--1. "BDR,Controls ipp_epdc_bdr[1:0] output" "0,1,2,3" group.long 0x704++0x03 line.long 0x00 "EPDC_GPIO_SET,EPDC General Purpose I/O Debug register" rbitfld.long 0x00 8. "PWRSTAT,reflect ipp_epdc_pwrstat input" "0,1" bitfld.long 0x00 7. "PWRWAKE,Controls ipp_epdc_pwrwake output" "0,1" newline bitfld.long 0x00 6. "PWRCOM,Controls ipp_epdc_pwrcom output" "0,1" bitfld.long 0x00 2.--5. "PWRCTRL,Controls ipp_epdc_pwrctrl[3:0] output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--1. "BDR,Controls ipp_epdc_bdr[1:0] output" "0,1,2,3" group.long 0x708++0x03 line.long 0x00 "EPDC_GPIO_CLR,EPDC General Purpose I/O Debug register" eventfld.long 0x00 8. "PWRSTAT,reflect ipp_epdc_pwrstat input" "0,1" eventfld.long 0x00 7. "PWRWAKE,Controls ipp_epdc_pwrwake output" "0,1" newline eventfld.long 0x00 6. "PWRCOM,Controls ipp_epdc_pwrcom output" "0,1" eventfld.long 0x00 2.--5. "PWRCTRL,Controls ipp_epdc_pwrctrl[3:0] output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--1. "BDR,Controls ipp_epdc_bdr[1:0] output" "0,1,2,3" group.long 0x70C++0x03 line.long 0x00 "EPDC_GPIO_TOG,EPDC General Purpose I/O Debug register" rbitfld.long 0x00 8. "PWRSTAT,reflect ipp_epdc_pwrstat input" "0,1" bitfld.long 0x00 7. "PWRWAKE,Controls ipp_epdc_pwrwake output" "0,1" newline bitfld.long 0x00 6. "PWRCOM,Controls ipp_epdc_pwrcom output" "0,1" bitfld.long 0x00 2.--5. "PWRCTRL,Controls ipp_epdc_pwrctrl[3:0] output" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--1. "BDR,Controls ipp_epdc_bdr[1:0] output" "0,1,2,3" rgroup.long 0x7F0++0x03 line.long 0x00 "EPDC_VERSION,EPDC Version Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Fixed read-only value reflecting the MAJOR field of the RTL version" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Fixed read-only value reflecting the MINOR field of the RTL version" newline hexmask.long.word 0x00 0.--15. 1. "STEP,Fixed read-only value reflecting the stepping of the RTL version" endif repeat 17. (increment 0 1)(increment 0 0x40) tree "PIGEON_X[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x800)++0x03 line.long 0x00 "EPDC_PIGEON__0,Panel Interface Signal Generator Register x_0" hexmask.long.byte 0x00 24.--31. 1. "STATE_MASK,state_mask = (FS|FB|FD|FE) and (LS|LB|LD|LE) select any combination of scan states as reference point for local counter to start ticking" hexmask.long.word 0x00 12.--23. 1. "MASK_CNT,When the global counter selected through MASK_CNT_SEL matches value in this reg pigeon local counter start ticking" newline bitfld.long 0x00 8.--11. "MASK_CNT_SEL,select global counters as mask condition use together with MASK_CNT" "0: pclk counter within one hscan state,1: pclk cycle within one hscan state,2: line counter within one vscan state,3: line cycle within one vscan state,4: frame counter,5: FRAME_CYCLE,6: horizontal counter (pclk counter within one..,7: vertical counter (line counter within one..,?..." bitfld.long 0x00 4.--7. "OFFSET,offset on pclk unit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2.--3. "INC_SEL,event to incrment local counter" "0: PCLK,1: line start pulse,2: frame start pulse,3: use another signal as tick event" bitfld.long 0x00 1. "POL,polarity of signal output" "0: normal signal (active high),1: inverted signal (active low)" newline bitfld.long 0x00 0. "EN,enable pigeon mode on this signal" "0,1" group.long ($2+0x810)++0x03 line.long 0x00 "EPDC_PIGEON__1,Panel Interface Signal Generator Register x_1" hexmask.long.word 0x00 16.--31. 1. "CLR_CNT,deassert signal output when counter match this value" hexmask.long.word 0x00 0.--15. 1. "SET_CNT,assert signal output when counter match this value" group.long ($2+0x820)++0x03 line.long 0x00 "EPDC_PIGEON__2,Panel Interface Signal Generator Register x_2" bitfld.long 0x00 4.--8. "SIG_ANOTHER,select another signal for logic operation or as mask or counter tick event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--3. "SIG_LOGIC,logic operation with another signal sigout : final output signal of this generator mask : final mask of this generator this_sig : intermediate signal of this generator before logic operation other_masks : intermediate mask result of this.." "0: no logic operation,1: sigout = sig_another AND this_sig,2: sigout = sig_another OR this_sig,3: mask = sig_another AND other_masks,?..." endif tree.end repeat.end tree.end endif tree "EWM" base ad:0x2802E000 group.byte 0x00++0x00 line.byte 0x00 "CTRL,Control Register" bitfld.byte 0x00 3. "INTEN,Interrupt Enable" "0: Deasserts the interrupt request,1: Generates an interrupt request when EWM_OUT_b.." bitfld.byte 0x00 2. "INEN,Input Enable" "0: EWM_in port is disabled,1: EWM_in port is enabled" newline bitfld.byte 0x00 1. "ASSIN,EWM_in's Assertion State Select" "0: Default assert state of the EWM_in signal,1: Inverts the assert state of EWM_in signal" bitfld.byte 0x00 0. "EWMEN,EWM enable" "0: EWM module is disabled,1: EWM module is enabled" group.byte 0x01++0x00 line.byte 0x00 "SERV,Service Register" hexmask.byte 0x00 0.--7. 1. "SERVICE,SERVICE" group.byte 0x02++0x00 line.byte 0x00 "CMPL,Compare Low Register" hexmask.byte 0x00 0.--7. 1. "COMPAREL,COMPAREL" group.byte 0x03++0x00 line.byte 0x00 "CMPH,Compare High Register" hexmask.byte 0x00 0.--7. 1. "COMPAREH,COMPAREH" group.byte 0x05++0x00 line.byte 0x00 "CLKPRESCALER,Clock Prescaler Register" hexmask.byte 0x00 0.--7. 1. "CLK_DIV,CLK_DIV" tree.end tree "FLEXIO" repeat 2. (list 0. 1.) (list ad:0x2803C000 ad:0x29350000) tree "FLEXIO$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "TRIGGER,Trigger Number" hexmask.long.byte 0x00 16.--23. 1. "PIN,Pin Number" newline hexmask.long.byte 0x00 8.--15. 1. "TIMER,Timer Number" hexmask.long.byte 0x00 0.--7. 1. "SHIFTER,Shifter Number" group.long 0x08++0x03 line.long 0x00 "CTRL,FlexIO Control Register" bitfld.long 0x00 31. "DOZEN,Doze Enable" "0: FlexIO enabled in Doze modes,1: FlexIO disabled in Doze modes" bitfld.long 0x00 30. "DBGE,Debug Enable" "0: FlexIO is disabled in debug modes,1: FlexIO is enabled in debug modes" newline bitfld.long 0x00 2. "FASTACC,Fast Access" "0: Configures for normal register accesses to..,1: Configures for fast register accesses to FlexIO" bitfld.long 0x00 1. "SWRST,Software Reset" "0: Software reset is disabled,1: Software reset is enabled all FlexIO.." newline bitfld.long 0x00 0. "FLEXEN,FlexIO Enable" "0: FlexIO module is disabled,1: FlexIO module is enabled" rgroup.long 0x0C++0x03 line.long 0x00 "PIN,Pin State Register" hexmask.long 0x00 0.--31. 1. "PDI,Pin Data Input" group.long 0x10++0x03 line.long 0x00 "SHIFTSTAT,Shifter Status Register" hexmask.long.byte 0x00 0.--7. 1. "SSF,Shifter Status Flag" group.long 0x14++0x03 line.long 0x00 "SHIFTERR,Shifter Error Register" hexmask.long.byte 0x00 0.--7. 1. "SEF,Shifter Error Flags" group.long 0x18++0x03 line.long 0x00 "TIMSTAT,Timer Status Register" hexmask.long.byte 0x00 0.--7. 1. "TSF,Timer Status Flags" group.long 0x20++0x03 line.long 0x00 "SHIFTSIEN,Shifter Status Interrupt Enable" hexmask.long.byte 0x00 0.--7. 1. "SSIE,Shifter Status Interrupt Enable" group.long 0x24++0x03 line.long 0x00 "SHIFTEIEN,Shifter Error Interrupt Enable" hexmask.long.byte 0x00 0.--7. 1. "SEIE,Shifter Error Interrupt Enable" group.long 0x28++0x03 line.long 0x00 "TIMIEN,Timer Interrupt Enable Register" hexmask.long.byte 0x00 0.--7. 1. "TEIE,Timer Status Interrupt Enable" group.long 0x30++0x03 line.long 0x00 "SHIFTSDEN,Shifter Status DMA Enable" hexmask.long.byte 0x00 0.--7. 1. "SSDE,Shifter Status DMA Enable" group.long 0x38++0x03 line.long 0x00 "TIMERSDEN,Timer Status DMA Enable" hexmask.long.byte 0x00 0.--7. 1. "TSDE,Timer Status DMA Enable" group.long 0x40++0x03 line.long 0x00 "SHIFTSTATE,Shifter State Register" bitfld.long 0x00 0.--2. "STATE,Current State Pointer" "0,1,2,3,4,5,6,7" group.long 0x48++0x03 line.long 0x00 "TRGSTAT,Trigger Status Register" eventfld.long 0x00 0.--3. "ETSF,External Trigger Status Flags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4C++0x03 line.long 0x00 "TRIGIEN,External Trigger Interrupt Enable Register" bitfld.long 0x00 0.--3. "TRIE,External Trigger Interrupt Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x50++0x03 line.long 0x00 "PINSTAT,Pin Status Register" hexmask.long 0x00 0.--31. 1. "PSF,Pin Status Flags" group.long 0x54++0x03 line.long 0x00 "PINIEN,Pin Interrupt Enable Register" hexmask.long 0x00 0.--31. 1. "PSIE,Pin Status Interrupt Enable" group.long 0x58++0x03 line.long 0x00 "PINREN,Pin Rising Edge Enable Register" hexmask.long 0x00 0.--31. 1. "PRE,Pin Rising Edge" group.long 0x5C++0x03 line.long 0x00 "PINFEN,Pin Falling Edge Enable Register" hexmask.long 0x00 0.--31. 1. "PFE,Pin Falling Edge" group.long 0x60++0x03 line.long 0x00 "PINOUTD,Pin Output Data Register" hexmask.long 0x00 0.--31. 1. "OUTD,Output Data" group.long 0x64++0x03 line.long 0x00 "PINOUTE,Pin Output Enable Register" hexmask.long 0x00 0.--31. 1. "OUTE,Output Enable" group.long 0x68++0x03 line.long 0x00 "PINOUTDIS,Pin Output Disable Register" hexmask.long 0x00 0.--31. 1. "OUTDIS,Output Disable" group.long 0x6C++0x03 line.long 0x00 "PINOUTCLR,Pin Output Clear Register" hexmask.long 0x00 0.--31. 1. "OUTCLR,Output Clear" group.long 0x70++0x03 line.long 0x00 "PINOUTSET,Pin Output Set Register" hexmask.long 0x00 0.--31. 1. "OUTSET,Output Set" group.long 0x74++0x03 line.long 0x00 "PINOUTTOG,Pin Output Toggle Register" hexmask.long 0x00 0.--31. 1. "OUTTOG,Output Toggle" repeat 8. (increment 0 1) (increment 0 0x4) group.long ($2+0x80)++0x03 line.long 0x00 "SHIFTCTL[$1],Shifter Control N Register $1" bitfld.long 0x00 24.--26. "TIMSEL,Timer Select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 23. "TIMPOL,Timer Polarity" "0: Shift on posedge of Shift clock,1: Shift on negedge of Shift clock" newline bitfld.long 0x00 16.--17. "PINCFG,Shifter Pin Configuration" "0: Shifter pin output disabled,1: Shifter pin open drain or bidirectional..,2: Shifter pin bidirectional output data,3: Shifter pin output" bitfld.long 0x00 8.--12. "PINSEL,Shifter Pin Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 7. "PINPOL,Shifter Pin Polarity" "0: Pin is active high,1: Pin is active low" bitfld.long 0x00 0.--2. "SMOD,Shifter Mode" "0: Disabled,1: Receive mode,2: Transmit mode,?,4: Match Store mode,5: Match Continuous mode,6: State mode,7: Logic mode" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x100)++0x03 line.long 0x00 "SHIFTCFG[$1],Shifter Configuration N Register $1" bitfld.long 0x00 16.--20. "PWIDTH,Parallel Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 12. "SSIZE,Shifter Size" "0: Shift register is 32-bit,1: Shift register is 24-bit" newline bitfld.long 0x00 9. "LATST,Late Store" "0: Shift register stores the pre-shift register..,1: Shift register stores the post-shift register.." bitfld.long 0x00 8. "INSRC,Input Source" "0: pin,1: Shifter N+1 Output" newline bitfld.long 0x00 4.--5. "SSTOP,Shifter Stop bit" "0: Stop bit disabled for..,?,2: Transmitter outputs stop bit value 0 on store..,3: Transmitter outputs stop bit value 1 on store.." bitfld.long 0x00 0.--1. "SSTART,Shifter Start bit" "0: Start bit disabled for..,1: Start bit disabled for..,2: Transmitter outputs start bit value 0 before..,3: Transmitter outputs start bit value 1 before.." repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "SHIFTBUF[$1],Shifter Buffer N Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUF,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x280)++0x03 line.long 0x00 "SHIFTBUFBIS[$1],Shifter Buffer N Bit Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFBIS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x300)++0x03 line.long 0x00 "SHIFTBUFBYS[$1],Shifter Buffer N Byte Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFBYS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x380)++0x03 line.long 0x00 "SHIFTBUFBBS[$1],Shifter Buffer N Bit Byte Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFBBS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x400)++0x03 line.long 0x00 "TIMCTL[$1],Timer Control N Register $1" bitfld.long 0x00 24.--29. "TRGSEL,Trigger Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. "TRGPOL,Trigger Polarity" "0: Trigger active high,1: Trigger active low" newline bitfld.long 0x00 22. "TRGSRC,Trigger Source" "0: External trigger selected,1: Internal trigger selected" bitfld.long 0x00 16.--17. "PINCFG,Timer Pin Configuration" "0: Timer pin output disabled,1: Timer pin open drain or bidirectional output..,2: Timer pin bidirectional output data,3: Timer pin output" newline bitfld.long 0x00 8.--12. "PINSEL,Timer Pin Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 7. "PINPOL,Timer Pin Polarity" "0: Pin is active high,1: Pin is active low" newline bitfld.long 0x00 6. "PININS,Timer Pin Input Select" "0: Timer pin input and output are selected by..,1: Timer pin input is selected by PINSEL+1 timer.." bitfld.long 0x00 5. "ONETIM,Timer One Time Operation" "0: The timer enable event is generated as normal,1: The timer enable event is blocked unless.." newline bitfld.long 0x00 0.--2. "TIMOD,Timer Mode" "0: Timer Disabled,1: Dual 8-bit counters baud mode,2: Dual 8-bit counters PWM high mode,3: Single 16-bit counter mode,4: Single 16-bit counter disable mode,5: Dual 8-bit counters word mode,6: Dual 8-bit counters PWM low mode,7: Single 16-bit input capture mode" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x480)++0x03 line.long 0x00 "TIMCFG[$1],Timer Configuration N Register $1" bitfld.long 0x00 24.--25. "TIMOUT,Timer Output" "0: Timer output is logic one when enabled and is..,1: Timer output is logic zero when enabled and..,2: Timer output is logic one when enabled and on..,3: Timer output is logic zero when enabled and.." bitfld.long 0x00 20.--22. "TIMDEC,Timer Decrement" "0: Decrement counter on FlexIO clock Shift clock..,1: Decrement counter on Trigger input (both..,2: Decrement counter on Pin input (both edges)..,3: Decrement counter on Trigger input (both..,4: Decrement counter on FlexIO clock divided by..,5: Decrement counter on FlexIO clock divided by..,6: Decrement counter on Pin input (rising edge)..,7: Decrement counter on Trigger input (rising.." newline bitfld.long 0x00 16.--18. "TIMRST,Timer Reset" "0: Timer never reset,1: Timer reset on Timer Output high,2: Timer reset on Timer Pin equal to Timer Output,3: Timer reset on Timer Trigger equal to Timer..,4: Timer reset on Timer Pin rising edge,?,6: Timer reset on Trigger rising edge,7: Timer reset on Trigger rising or falling edge" bitfld.long 0x00 12.--14. "TIMDIS,Timer Disable" "0: Timer never disabled,1: Timer disabled on Timer N-1 disable,2: Timer disabled on Timer compare (upper 8-bits..,3: Timer disabled on Timer compare (upper 8-bits..,4: Timer disabled on Pin rising or falling edge,5: Timer disabled on Pin rising or falling edge..,6: Timer disabled on Trigger falling edge,?..." newline bitfld.long 0x00 8.--10. "TIMENA,Timer Enable" "0: Timer always enabled,1: Timer enabled on Timer N-1 enable,2: Timer enabled on Trigger high,3: Timer enabled on Trigger high and Pin high,4: Timer enabled on Pin rising edge,5: Timer enabled on Pin rising edge and Trigger..,6: Timer enabled on Trigger rising edge,7: Timer enabled on Trigger rising or falling edge" bitfld.long 0x00 4.--5. "TSTOP,Timer Stop Bit" "0: Stop bit disabled,1: Stop bit is enabled on timer compare,2: Stop bit is enabled on timer disable,3: Stop bit is enabled on timer compare and.." newline bitfld.long 0x00 1. "TSTART,Timer Start Bit" "0: Start bit disabled,1: Start bit enabled" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x500)++0x03 line.long 0x00 "TIMCMP[$1],Timer Compare N Register $1" hexmask.long.word 0x00 0.--15. 1. "CMP,Timer Compare Value" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x680)++0x03 line.long 0x00 "SHIFTBUFNBS[$1],Shifter Buffer N Nibble Byte Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFNBS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x700)++0x03 line.long 0x00 "SHIFTBUFHWS[$1],Shifter Buffer N Half Word Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFHWS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x780)++0x03 line.long 0x00 "SHIFTBUFNIS[$1],Shifter Buffer N Nibble Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFNIS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x800)++0x03 line.long 0x00 "SHIFTBUFOES[$1],Shifter Buffer N Odd Even Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFOES,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x880)++0x03 line.long 0x00 "SHIFTBUFEOS[$1],Shifter Buffer N Even Odd Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFEOS,Shift Buffer" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x900)++0x03 line.long 0x00 "SHIFTBUFHBS[$1],Shifter Buffer N Halfword Byte Swapped Register $1" hexmask.long 0x00 0.--31. 1. "SHIFTBUFHBS,Shift Buffer" repeat.end tree.end repeat.end tree.end tree "FLEXSPI (FlexSPI)" tree "FLEXSPI0" base ad:0x28039000 group.long 0x00++0x03 line.long 0x00 "MCR0,Module Control Register 0" hexmask.long.byte 0x00 24.--31. 1. "AHBGRANTWAIT,Timeout wait cycle for AHB command grant" hexmask.long.byte 0x00 16.--23. 1. "IPGRANTWAIT,Timeout wait cycle for IP command grant" newline bitfld.long 0x00 15. "LEARNEN,This bit is used to enable/disable data learning feature" "0: Disable,1: Enable" bitfld.long 0x00 14. "SCKFREERUNEN,This bit is used to force SCLK output free-running" "0: Disable,1: Enable" newline bitfld.long 0x00 13. "COMBINATIONEN,This bit is to support Flash Octal mode access by combining Port A and B Data pins (A_DATA[3:0] and B_DATA[3:0]) when Port A and Port B are of 4 bit data width" "0: Disable,1: Enable" bitfld.long 0x00 12. "DOZEEN,Doze mode enable bit" "0: Doze mode support disabled,1: Doze mode support enabled" newline bitfld.long 0x00 11. "HSEN,Half Speed Serial Flash access Enable" "0: Disable divide by 2 of serial flash clock for..,1: Enable divide by 2 of serial flash clock for.." bitfld.long 0x00 8.--10. "SERCLKDIV,Serial root clock" "0: Divided by 1,1: Divided by 2,2: Divided by 3,3: Divided by 4,4: Divided by 5,5: Divided by 6,6: Divided by 7,7: Divided by 8" newline bitfld.long 0x00 7. "ATDFEN,Enable AHB bus Write Access to IP TX FIFO" "0: IP TX FIFO should be written by IP Bus,1: IP TX FIFO should be written by AHB Bus" bitfld.long 0x00 6. "ARDFEN,Enable AHB bus Read Access to IP RX FIFO" "0: IP RX FIFO should be read by IP Bus,1: IP RX FIFO should be read by AHB Bus" newline bitfld.long 0x00 4.--5. "RXCLKSRC,Sample Clock source selection for Flash Reading" "0: Dummy Read strobe generated by FlexSPI..,1: Dummy Read strobe generated by FlexSPI..,?,3: Flash provided Read strobe and input from DQS.." bitfld.long 0x00 1. "MDIS,Module Disable" "0,1" newline bitfld.long 0x00 0. "SWRESET,Software Reset" "0,1" group.long 0x04++0x03 line.long 0x00 "MCR1,Module Control Register 1" hexmask.long.word 0x00 16.--31. 1. "SEQWAIT,Command Sequence Execution will timeout and abort after SEQWAIT * 1024 Serial Root Clock cycles" hexmask.long.word 0x00 0.--15. 1. "AHBBUSWAIT,AHB Bus wait" group.long 0x08++0x03 line.long 0x00 "MCR2,Module Control Register 2" hexmask.long.byte 0x00 24.--31. 1. "RESUMEWAIT,Wait cycle (in AHB clock cycle) for idle state before suspended command sequence resumed" bitfld.long 0x00 23. "RX_CLK_SRC_DIFF,Sample Clock source or source_b selection for Flash Reading" "0,1" newline bitfld.long 0x00 21.--22. "RXCLKSRC_B,Sample Clock source selection for Flash Reading" "0: Dummy Read strobe generated by FlexSPI..,1: Dummy Read strobe generated by FlexSPI..,2: SCLK output clock and loopback from SCLK..,3: Flash provided Read strobe and input from DQS.." bitfld.long 0x00 19. "SCKBDIFFOPT,B_SCLK pad can be used as A_SCLK differential clock output (inverted clock to A_SCLK)" "0: B_SCLK pad is used as port B SCLK clock output,1: B_SCLK pad is used as port A SCLK inverted.." newline bitfld.long 0x00 15. "SAMEDEVICEEN,All external devices are same devices (both in types and size) for A1/A2/B1/B2" "0: In Individual mode..,1: FLSHA1CR0/FLSHA1CR1/FLSHA1CR2 register.." bitfld.long 0x00 14. "CLRLEARNPHASE,The sampling clock phase selection will be reset to phase 0 when this bit is written with 0x1" "0,1" newline bitfld.long 0x00 11. "CLRAHBBUFOPT,Clear AHB buffer" "0: AHB RX/TX Buffer will not be cleaned..,1: AHB RX/TX Buffer will be cleaned.." group.long 0x0C++0x03 line.long 0x00 "AHBCR,AHB Bus Control Register" bitfld.long 0x00 10. "READSZALIGN,AHB Read Size Alignment" "0: AHB read size will be decided by other..,1: AHB read size to up size to 8 bytes aligned.." bitfld.long 0x00 6. "READADDROPT,AHB Read Address option bit" "0: There is AHB read burst start address..,1: There is no AHB read burst start address.." newline bitfld.long 0x00 5. "PREFETCHEN,AHB Read Prefetch Enable" "0,1" bitfld.long 0x00 4. "BUFFERABLEEN,Enable AHB bus bufferable write access support" "0: Disabled,1: Enabled" newline bitfld.long 0x00 3. "CACHABLEEN,Enable AHB bus cachable read access support" "0: Disabled,1: Enabled" bitfld.long 0x00 0. "APAREN,Parallel mode enabled for AHB triggered Command (both read and write)" "0: Flash will be accessed in Individual mode,1: Flash will be accessed in Parallel mode" group.long 0x10++0x03 line.long 0x00 "INTEN,Interrupt Enable Register" bitfld.long 0x00 13. "KEYERROREN,OTFAD key blob processing error interrupt enable" "0,1" bitfld.long 0x00 12. "KEYDONEEN,OTFAD key blob processing done interrupt enable" "0,1" newline bitfld.long 0x00 11. "SEQTIMEOUTEN,Sequence execution timeout interrupt enable" "0,1" bitfld.long 0x00 10. "AHBBUSERROREN,AHB Bus error interrupt enable" "0,1" newline bitfld.long 0x00 9. "SCKSTOPBYWREN,SCLK is stopped during command sequence because Async TX FIFO empty interrupt enable" "0,1" bitfld.long 0x00 8. "SCKSTOPBYRDEN,SCLK is stopped during command sequence because Async RX FIFO full interrupt enable" "0,1" newline bitfld.long 0x00 7. "DATALEARNFAILEN,Data Learning failed interrupt enable" "0,1" bitfld.long 0x00 6. "IPTXWEEN,IP TX FIFO WaterMark empty interrupt enable" "0,1" newline bitfld.long 0x00 5. "IPRXWAEN,IP RX FIFO WaterMark available interrupt enable" "0,1" bitfld.long 0x00 4. "AHBCMDERREN,AHB triggered Command Sequences Error Detected interrupt enable" "0,1" newline bitfld.long 0x00 3. "IPCMDERREN,IP triggered Command Sequences Error Detected interrupt enable" "0,1" bitfld.long 0x00 2. "AHBCMDGEEN,AHB triggered Command Sequences Grant Timeout interrupt enable" "0,1" newline bitfld.long 0x00 1. "IPCMDGEEN,IP triggered Command Sequences Grant Timeout interrupt enable" "0,1" bitfld.long 0x00 0. "IPCMDDONEEN,IP triggered Command Sequences Execution finished interrupt enable" "0,1" group.long 0x14++0x03 line.long 0x00 "INTR,Interrupt Register" rbitfld.long 0x00 13. "KEYERROR,OTFAD key blob processing error interrupt" "0,1" eventfld.long 0x00 12. "KEYDONE,OTFAD key blob processing done interrupt" "0,1" newline eventfld.long 0x00 11. "SEQTIMEOUT,Sequence execution timeout interrupt" "0,1" eventfld.long 0x00 10. "AHBBUSERROR,AHB Bus timeout or AHB bus illegal access Flash during OTFAD key blob processing interrupt" "0,1" newline eventfld.long 0x00 9. "SCKSTOPBYWR,SCLK is stopped during command sequence because Async TX FIFO empty interrupt" "0,1" eventfld.long 0x00 8. "SCKSTOPBYRD,SCLK is stopped during command sequence because Async RX FIFO full interrupt" "0,1" newline eventfld.long 0x00 7. "DATALEARNFAIL,Data Learning failed interrupt" "0,1" eventfld.long 0x00 6. "IPTXWE,IP TX FIFO watermark empty interrupt" "0,1" newline eventfld.long 0x00 5. "IPRXWA,IP RX FIFO watermark available interrupt" "0,1" eventfld.long 0x00 4. "AHBCMDERR,AHB triggered Command Sequences Error Detected interrupt" "0,1" newline eventfld.long 0x00 3. "IPCMDERR,IP triggered Command Sequences Error Detected interrupt" "0,1" eventfld.long 0x00 2. "AHBCMDGE,AHB triggered Command Sequences Grant Timeout interrupt" "0,1" newline eventfld.long 0x00 1. "IPCMDGE,IP triggered Command Sequences Grant Timeout interrupt" "0,1" eventfld.long 0x00 0. "IPCMDDONE,IP triggered Command Sequences Execution finished interrupt" "0,1" group.long 0x18++0x03 line.long 0x00 "LUTKEY,LUT Key Register" hexmask.long 0x00 0.--31. 1. "KEY,The Key to lock or unlock LUT" group.long 0x1C++0x03 line.long 0x00 "LUTCR,LUT Control Register" bitfld.long 0x00 1. "UNLOCK,Unlock LUT" "0,1" bitfld.long 0x00 0. "LOCK,Lock LUT" "0,1" group.long 0x20++0x03 line.long 0x00 "AHBRXBUF0CR0,AHB RX Buffer 0 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x24++0x03 line.long 0x00 "AHBRXBUF1CR0,AHB RX Buffer 1 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x28++0x03 line.long 0x00 "AHBRXBUF2CR0,AHB RX Buffer 2 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x2C++0x03 line.long 0x00 "AHBRXBUF3CR0,AHB RX Buffer 3 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x30++0x03 line.long 0x00 "AHBRXBUF4CR0,AHB RX Buffer 4 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x34++0x03 line.long 0x00 "AHBRXBUF5CR0,AHB RX Buffer 5 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x38++0x03 line.long 0x00 "AHBRXBUF6CR0,AHB RX Buffer 6 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x3C++0x03 line.long 0x00 "AHBRXBUF7CR0,AHB RX Buffer 7 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x60++0x03 line.long 0x00 "FLSHA1CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x64++0x03 line.long 0x00 "FLSHA2CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x68++0x03 line.long 0x00 "FLSHB1CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x6C++0x03 line.long 0x00 "FLSHB2CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x70)++0x03 line.long 0x00 "FLSHCR1A$1,Flash Control Register $1" hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,This field is used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion" bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "0: The CS interval unit is 1 serial clock cycle,1: The CS interval unit is 256 serial clock cycle" newline bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10. "WA,Word Addressable" "0,1" newline bitfld.long 0x00 5.--9. "TCSH,Serial Flash CS Hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCSS,Serial Flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x78)++0x03 line.long 0x00 "FLSHCR1B$1,Flash Control Register $1" hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,This field is used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion" bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "0: The CS interval unit is 1 serial clock cycle,1: The CS interval unit is 256 serial clock cycle" newline bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10. "WA,Word Addressable" "0,1" newline bitfld.long 0x00 5.--9. "TCSH,Serial Flash CS Hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCSS,Serial Flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x80)++0x03 line.long 0x00 "FLSHCR2A$1,Flash Control Register 2" bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer which is internally saved pointer by JMP_ON_CS" "0,1" bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "0: The AWRWAIT unit is 2 ahb clock cycle,1: The AWRWAIT unit is 8 ahb clock cycle,2: The AWRWAIT unit is 32 ahb clock cycle,3: The AWRWAIT unit is 128 ahb clock cycle,4: The AWRWAIT unit is 512 ahb clock cycle,5: The AWRWAIT unit is 2048 ahb clock cycle,6: The AWRWAIT unit is 8192 ahb clock cycle,7: The AWRWAIT unit is 32768 ahb clock cycle" newline hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,For certain devices (such as FPGA) it need some time to write data into internal memory after the command sequences finished on FlexSPI interface" bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "AWRSEQID,Sequence Index for AHB Write triggered Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence Number for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. "ARDSEQID,Sequence Index for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x88)++0x03 line.long 0x00 "FLSHCR2B$1,Flash Control Register 2" bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer which is internally saved pointer by JMP_ON_CS" "0,1" bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "0: The AWRWAIT unit is 2 ahb clock cycle,1: The AWRWAIT unit is 8 ahb clock cycle,2: The AWRWAIT unit is 32 ahb clock cycle,3: The AWRWAIT unit is 128 ahb clock cycle,4: The AWRWAIT unit is 512 ahb clock cycle,5: The AWRWAIT unit is 2048 ahb clock cycle,6: The AWRWAIT unit is 8192 ahb clock cycle,7: The AWRWAIT unit is 32768 ahb clock cycle" newline hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,For certain devices (such as FPGA) it need some time to write data into internal memory after the command sequences finished on FlexSPI interface" bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "AWRSEQID,Sequence Index for AHB Write triggered Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence Number for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. "ARDSEQID,Sequence Index for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end group.long 0x94++0x03 line.long 0x00 "FLSHCR4,Flash Control Register 4" bitfld.long 0x00 3. "WMENB,Write mask enable bit for flash device on port B" "0: Write mask is disabled DQS(RWDS) pin will not..,1: Write mask is enabled DQS(RWDS) pin will be.." bitfld.long 0x00 2. "WMENA,Write mask enable bit for flash device on port A" "0: Write mask is disabled DQS(RWDS) pin will not..,1: Write mask is enabled DQS(RWDS) pin will be.." newline bitfld.long 0x00 1. "WMOPT2,Write mask option bit 2" "0: DQS pin will be used as Write Mask when..,1: DQS pin will not be used as Write Mask when.." bitfld.long 0x00 0. "WMOPT1,Write mask option bit 1" "0: DQS pin will be used as Write Mask when..,1: DQS pin will not be used as Write Mask when.." group.long 0xA0++0x03 line.long 0x00 "IPCR0,IP Control Register 0" hexmask.long 0x00 0.--31. 1. "SFAR,Serial Flash Address for IP command" group.long 0xA4++0x03 line.long 0x00 "IPCR1,IP Control Register 1" bitfld.long 0x00 31. "IPAREN,Parallel mode Enabled for IP command" "0: Flash will be accessed in Individual mode,1: Flash will be accessed in Parallel mode" bitfld.long 0x00 24.--26. "ISEQNUM,Sequence Number for IP command: ISEQNUM+1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "ISEQID,Sequence Index in LUT for IP command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "IDATSZ,Flash Read/Program Data Size (in Bytes) for IP command" group.long 0xB0++0x03 line.long 0x00 "IPCMD,IP Command Register" bitfld.long 0x00 0. "TRG,Setting this bit will trigger an IP Command" "0,1" group.long 0xB4++0x03 line.long 0x00 "DLPR,Data Learn Pattern Register" hexmask.long 0x00 0.--31. 1. "DLP,Data Learning Pattern" group.long 0xB8++0x03 line.long 0x00 "IPRXFCR,IP RX FIFO Control Register" hexmask.long.byte 0x00 2.--8. 1. "RXWMRK,Watermark level is (RXWMRK+1)*64 Bits" bitfld.long 0x00 1. "RXDMAEN,IP RX FIFO reading by DMA enabled" "0: IP RX FIFO would be read by processor,1: IP RX FIFO would be read by DMA" newline bitfld.long 0x00 0. "CLRIPRXF,Clear all valid data entries in IP RX FIFO" "0,1" group.long 0xBC++0x03 line.long 0x00 "IPTXFCR,IP TX FIFO Control Register" hexmask.long.byte 0x00 2.--8. 1. "TXWMRK,Watermark level is (TXWMRK+1)*64 Bits" bitfld.long 0x00 1. "TXDMAEN,IP TX FIFO filling by DMA enabled" "0: IP TX FIFO would be filled by processor,1: IP TX FIFO would be filled by DMA" newline bitfld.long 0x00 0. "CLRIPTXF,Clear all valid data entries in IP TX FIFO" "0,1" group.long 0xC0++0x03 line.long 0x00 "DLLCRA,DLL Control Register 0" bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "0,1" newline bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line is: ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock (serial root clock). If serial root clock is >= 100 MHz DLLEN set to 0x1 OVRDEN set to =0x0 then SLVDLYTARGET setting of 0xF is recommended" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. "DLLRESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "0,1" group.long 0xC4++0x03 line.long 0x00 "DLLCRB,DLL Control Register 0" bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "0,1" newline bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line is: ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock (serial root clock). If serial root clock is >= 100 MHz DLLEN set to 0x1 OVRDEN set to =0x0 then SLVDLYTARGET setting of 0xF is recommended" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. "DLLRESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "0,1" group.long 0xC8++0x03 line.long 0x00 "MISCCR2,Misc Control Register 2" bitfld.long 0x00 8. "IPEDMUX_SWRESET,This bit is software reset for IPED MUX.This bit is not auto-cleared by hardware" "0,1" bitfld.long 0x00 6. "OTFAD_SWRESET,This bit is software reset for OTFAD.It is connected to output.This bit is not auto-cleared by hardware" "0,1" newline bitfld.long 0x00 5. "RWDSOEOPT,FlexSPI controller could delay the RWDS (write mask) output enable desertion by one cycle to relax transmit timing" "0: RWDS output enable desertion is delayed by..,1: RWDS output enable desertion is not delayed.." bitfld.long 0x00 4. "DOEOPT,FlexSPI controller could delay the data lines output enable desertion by one cycle to relax transmit timing" "0: Data line output enable desertion is delayed..,1: Data line output enable desertion is not.." newline bitfld.long 0x00 2.--3. "PHASERSTOPT,SCLK/DQS output clock phase may need reset after a DDR sequence finished (high level)" "0: SCLK/DQS output phase will be reset 0.5 cycle..,1: SCLK/DQS output phase will be reset 1.5 cycle..,2: SCLK/DQS output phase will be reset 2.5 cycle..,3: SCLK/DQS output phase will be reset 3.5 cycle.." bitfld.long 0x00 0.--1. "LEARNPHASEGAP,The clock phase gap for data learning is: N delay cells delay (75ps~200ps for each delay cell)" "0: val0,1: val1,2: val2,3: val3" rgroup.long 0xE0++0x03 line.long 0x00 "STS0,Status Register 0" bitfld.long 0x00 8.--11. "DATALEARNPHASEB,Indicate the sampling clock phase selection on Port B after Data Learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. "DATALEARNPHASEA,Indicate the sampling clock phase selection on Port A after Data Learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2.--3. "ARBCMDSRC,This status field indicates the trigger source of current command sequence granted by arbitrator" "0: Triggered by AHB read command (triggered by..,1: Triggered by AHB write command (triggered by..,2: Triggered by IP command (triggered by setting..,3: Triggered by suspended command (resumed)" bitfld.long 0x00 1. "ARBIDLE,This status bit indicates the state machine in ARB_CTL is busy and there is command sequence granted by arbitrator and not finished yet on FlexSPI interface" "0,1" newline bitfld.long 0x00 0. "SEQIDLE,This status bit indicates the state machine in SEQ_CTL is idle and there is command sequence executing on FlexSPI interface" "0,1" rgroup.long 0xE4++0x03 line.long 0x00 "STS1,Status Register 1" bitfld.long 0x00 24.--27. "IPCMDERRCODE,Indicates the Error Code when IP command Error detected" "0: No error,?,2: IP command with JMP_ON_CS instruction used in..,3: There is unknown instruction opcode in the..,4: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in..,5: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in..,6: Flash access start address exceed the whole..,?,?,?,?,?,?,?,14: Sequence execution timeout,15: Flash boundary crossed" bitfld.long 0x00 16.--19. "IPCMDERRID,Indicates the sequence Index when IP command error detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "AHBCMDERRCODE,Indicates the Error Code when AHB command Error detected" "0: No error,?,2: AHB Write command with JMP_ON_CS instruction..,3: There is unknown instruction opcode in the..,4: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in..,5: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in..,?,?,?,?,?,?,?,?,14: Sequence execution timeout,?..." bitfld.long 0x00 0.--3. "AHBCMDERRID,Indicates the sequence index when an AHB command error is detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xE8++0x03 line.long 0x00 "STS2,Status Register 2" bitfld.long 0x00 24.--29. "BREFSEL,Flash B sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. "BSLVSEL,Flash B sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 17. "BREFLOCK,Flash B sample clock reference delay line locked" "0,1" bitfld.long 0x00 16. "BSLVLOCK,Flash B sample clock slave delay line locked" "0,1" newline bitfld.long 0x00 8.--13. "AREFSEL,Flash A sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 2.--7. "ASLVSEL,Flash A sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 1. "AREFLOCK,Flash A sample clock reference delay line locked" "0,1" bitfld.long 0x00 0. "ASLVLOCK,Flash A sample clock slave delay line locked" "0,1" rgroup.long 0xEC++0x03 line.long 0x00 "AHBSPNDSTS,AHB Suspend Status Register" hexmask.long.word 0x00 16.--31. 1. "DATLFT,Left Data size for suspended command sequence (in byte)" bitfld.long 0x00 1.--3. "BUFID,AHB RX BUF ID for suspended command sequence" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "ACTIVE,Indicates if an AHB read prefetch command sequence has been suspended" "0,1" rgroup.long 0xF0++0x03 line.long 0x00 "IPRXFSTS,IP RX FIFO Status Register" hexmask.long.word 0x00 16.--31. 1. "RDCNTR,Total Read Data Counter: RDCNTR * 64 Bits" hexmask.long.byte 0x00 0.--7. 1. "FILL,Fill level of IP RX FIFO" rgroup.long 0xF4++0x03 line.long 0x00 "IPTXFSTS,IP TX FIFO Status Register" hexmask.long.word 0x00 16.--31. 1. "WRCNTR,Total Write Data Counter: WRCNTR * 64 Bits" hexmask.long.byte 0x00 0.--7. 1. "FILL,Fill level of IP TX FIFO" rgroup.long 0xF8++0x03 line.long 0x00 "VERID,IP Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,MSB 8bit of Version ID of design version" hexmask.long.byte 0x00 16.--23. 1. "MINOR,LSB 8bit of Version ID of design version" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature of design version" repeat 32. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x100)++0x03 line.long 0x00 "RFDR[$1],IP RX FIFO Data Register x $1" hexmask.long 0x00 0.--31. 1. "RXDATA,RX Data" repeat.end repeat 32. (increment 0 1) (increment 0 0x04) wgroup.long ($2+0x180)++0x03 line.long 0x00 "TFDR[$1],IP TX FIFO Data Register x $1" hexmask.long 0x00 0.--31. 1. "TXDATA,TX Data" repeat.end repeat 64. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "LUT[$1],LUT x $1" bitfld.long 0x00 26.--31. "OPCODE1,OPCODE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 24.--25. "NUM_PADS1,NUM_PADS1" "0,1,2,3" newline hexmask.long.byte 0x00 16.--23. 1. "OPERAND1,OPERAND1" bitfld.long 0x00 10.--15. "OPCODE0,OPCODE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--9. "NUM_PADS0,NUM_PADS0" "0,1,2,3" hexmask.long.byte 0x00 0.--7. 1. "OPERAND0,OPERAND0" repeat.end tree.end tree "FLEXSPI1" base ad:0x28092000 group.long 0x00++0x03 line.long 0x00 "MCR0,Module Control Register 0" hexmask.long.byte 0x00 24.--31. 1. "AHBGRANTWAIT,Timeout wait cycle for AHB command grant" hexmask.long.byte 0x00 16.--23. 1. "IPGRANTWAIT,Timeout wait cycle for IP command grant" newline bitfld.long 0x00 15. "LEARNEN,This bit is used to enable/disable data learning feature" "0: Disable,1: Enable" bitfld.long 0x00 14. "SCKFREERUNEN,This bit is used to force SCLK output free-running" "0: Disable,1: Enable" newline bitfld.long 0x00 13. "COMBINATIONEN,This bit is to support Flash Octal mode access by combining Port A and B Data pins (A_DATA[3:0] and B_DATA[3:0]) when Port A and Port B are of 4 bit data width" "0: Disable,1: Enable" bitfld.long 0x00 12. "DOZEEN,Doze mode enable bit" "0: Doze mode support disabled,1: Doze mode support enabled" newline bitfld.long 0x00 11. "HSEN,Half Speed Serial Flash access Enable" "0: Disable divide by 2 of serial flash clock for..,1: Enable divide by 2 of serial flash clock for.." bitfld.long 0x00 8.--10. "SERCLKDIV,Serial root clock" "0: Divided by 1,1: Divided by 2,2: Divided by 3,3: Divided by 4,4: Divided by 5,5: Divided by 6,6: Divided by 7,7: Divided by 8" newline bitfld.long 0x00 7. "ATDFEN,Enable AHB bus Write Access to IP TX FIFO" "0: IP TX FIFO should be written by IP Bus,1: IP TX FIFO should be written by AHB Bus" bitfld.long 0x00 6. "ARDFEN,Enable AHB bus Read Access to IP RX FIFO" "0: IP RX FIFO should be read by IP Bus,1: IP RX FIFO should be read by AHB Bus" newline bitfld.long 0x00 4.--5. "RXCLKSRC,Sample Clock source selection for Flash Reading" "0: Dummy Read strobe generated by FlexSPI..,1: Dummy Read strobe generated by FlexSPI..,?,3: Flash provided Read strobe and input from DQS.." bitfld.long 0x00 1. "MDIS,Module Disable" "0,1" newline bitfld.long 0x00 0. "SWRESET,Software Reset" "0,1" group.long 0x04++0x03 line.long 0x00 "MCR1,Module Control Register 1" hexmask.long.word 0x00 16.--31. 1. "SEQWAIT,Command Sequence Execution will timeout and abort after SEQWAIT * 1024 Serial Root Clock cycles" hexmask.long.word 0x00 0.--15. 1. "AHBBUSWAIT,AHB Bus wait" group.long 0x08++0x03 line.long 0x00 "MCR2,Module Control Register 2" hexmask.long.byte 0x00 24.--31. 1. "RESUMEWAIT,Wait cycle (in AHB clock cycle) for idle state before suspended command sequence resumed" bitfld.long 0x00 23. "RX_CLK_SRC_DIFF,Sample Clock source or source_b selection for Flash Reading" "0,1" newline bitfld.long 0x00 21.--22. "RXCLKSRC_B,Sample Clock source selection for Flash Reading" "0: Dummy Read strobe generated by FlexSPI..,1: Dummy Read strobe generated by FlexSPI..,2: SCLK output clock and loopback from SCLK..,3: Flash provided Read strobe and input from DQS.." bitfld.long 0x00 19. "SCKBDIFFOPT,B_SCLK pad can be used as A_SCLK differential clock output (inverted clock to A_SCLK)" "0: B_SCLK pad is used as port B SCLK clock output,1: B_SCLK pad is used as port A SCLK inverted.." newline bitfld.long 0x00 15. "SAMEDEVICEEN,All external devices are same devices (both in types and size) for A1/A2/B1/B2" "0: In Individual mode..,1: FLSHA1CR0/FLSHA1CR1/FLSHA1CR2 register.." bitfld.long 0x00 14. "CLRLEARNPHASE,The sampling clock phase selection will be reset to phase 0 when this bit is written with 0x1" "0,1" newline bitfld.long 0x00 11. "CLRAHBBUFOPT,Clear AHB buffer" "0: AHB RX/TX Buffer will not be cleaned..,1: AHB RX/TX Buffer will be cleaned.." group.long 0x0C++0x03 line.long 0x00 "AHBCR,AHB Bus Control Register" bitfld.long 0x00 10. "READSZALIGN,AHB Read Size Alignment" "0: AHB read size will be decided by other..,1: AHB read size to up size to 8 bytes aligned.." bitfld.long 0x00 6. "READADDROPT,AHB Read Address option bit" "0: There is AHB read burst start address..,1: There is no AHB read burst start address.." newline bitfld.long 0x00 5. "PREFETCHEN,AHB Read Prefetch Enable" "0,1" bitfld.long 0x00 4. "BUFFERABLEEN,Enable AHB bus bufferable write access support" "0: Disabled,1: Enabled" newline bitfld.long 0x00 3. "CACHABLEEN,Enable AHB bus cachable read access support" "0: Disabled,1: Enabled" bitfld.long 0x00 0. "APAREN,Parallel mode enabled for AHB triggered Command (both read and write)" "0: Flash will be accessed in Individual mode,1: Flash will be accessed in Parallel mode" group.long 0x10++0x03 line.long 0x00 "INTEN,Interrupt Enable Register" bitfld.long 0x00 11. "SEQTIMEOUTEN,Sequence execution timeout interrupt enable" "0,1" bitfld.long 0x00 10. "AHBBUSTIMEOUTEN,AHB Bus timeout interrupt" "0,1" newline bitfld.long 0x00 9. "SCKSTOPBYWREN,SCLK is stopped during command sequence because Async TX FIFO empty interrupt enable" "0,1" bitfld.long 0x00 8. "SCKSTOPBYRDEN,SCLK is stopped during command sequence because Async RX FIFO full interrupt enable" "0,1" newline bitfld.long 0x00 7. "DATALEARNFAILEN,Data Learning failed interrupt enable" "0,1" bitfld.long 0x00 6. "IPTXWEEN,IP TX FIFO WaterMark empty interrupt enable" "0,1" newline bitfld.long 0x00 5. "IPRXWAEN,IP RX FIFO WaterMark available interrupt enable" "0,1" bitfld.long 0x00 4. "AHBCMDERREN,AHB triggered Command Sequences Error Detected interrupt enable" "0,1" newline bitfld.long 0x00 3. "IPCMDERREN,IP triggered Command Sequences Error Detected interrupt enable" "0,1" bitfld.long 0x00 2. "AHBCMDGEEN,AHB triggered Command Sequences Grant Timeout interrupt enable" "0,1" newline bitfld.long 0x00 1. "IPCMDGEEN,IP triggered Command Sequences Grant Timeout interrupt enable" "0,1" bitfld.long 0x00 0. "IPCMDDONEEN,IP triggered Command Sequences Execution finished interrupt enable" "0,1" group.long 0x14++0x03 line.long 0x00 "INTR,Interrupt Register" eventfld.long 0x00 11. "SEQTIMEOUT,Sequence execution timeout interrupt" "0,1" eventfld.long 0x00 10. "AHBBUSTIMEOUT,AHB Bus timeout interrupt" "0,1" newline eventfld.long 0x00 9. "SCKSTOPBYWR,SCLK is stopped during command sequence because Async TX FIFO empty interrupt" "0,1" eventfld.long 0x00 8. "SCKSTOPBYRD,SCLK is stopped during command sequence because Async RX FIFO full interrupt" "0,1" newline eventfld.long 0x00 7. "DATALEARNFAIL,Data Learning failed interrupt" "0,1" eventfld.long 0x00 6. "IPTXWE,IP TX FIFO watermark empty interrupt" "0,1" newline eventfld.long 0x00 5. "IPRXWA,IP RX FIFO watermark available interrupt" "0,1" eventfld.long 0x00 4. "AHBCMDERR,AHB triggered Command Sequences Error Detected interrupt" "0,1" newline eventfld.long 0x00 3. "IPCMDERR,IP triggered Command Sequences Error Detected interrupt" "0,1" eventfld.long 0x00 2. "AHBCMDGE,AHB triggered Command Sequences Grant Timeout interrupt" "0,1" newline eventfld.long 0x00 1. "IPCMDGE,IP triggered Command Sequences Grant Timeout interrupt" "0,1" eventfld.long 0x00 0. "IPCMDDONE,IP triggered Command Sequences Execution finished interrupt" "0,1" group.long 0x18++0x03 line.long 0x00 "LUTKEY,LUT Key Register" hexmask.long 0x00 0.--31. 1. "KEY,The Key to lock or unlock LUT" group.long 0x1C++0x03 line.long 0x00 "LUTCR,LUT Control Register" bitfld.long 0x00 1. "UNLOCK,Unlock LUT" "0,1" bitfld.long 0x00 0. "LOCK,Lock LUT" "0,1" group.long 0x20++0x03 line.long 0x00 "AHBRXBUF0CR0,AHB RX Buffer 0 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x24++0x03 line.long 0x00 "AHBRXBUF1CR0,AHB RX Buffer 1 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x28++0x03 line.long 0x00 "AHBRXBUF2CR0,AHB RX Buffer 2 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x2C++0x03 line.long 0x00 "AHBRXBUF3CR0,AHB RX Buffer 3 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x30++0x03 line.long 0x00 "AHBRXBUF4CR0,AHB RX Buffer 4 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x34++0x03 line.long 0x00 "AHBRXBUF5CR0,AHB RX Buffer 5 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x38++0x03 line.long 0x00 "AHBRXBUF6CR0,AHB RX Buffer 6 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x3C++0x03 line.long 0x00 "AHBRXBUF7CR0,AHB RX Buffer 7 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x60++0x03 line.long 0x00 "FLSHA1CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x64++0x03 line.long 0x00 "FLSHA2CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x68++0x03 line.long 0x00 "FLSHB1CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x6C++0x03 line.long 0x00 "FLSHB2CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x70)++0x03 line.long 0x00 "FLSHCR1A$1,Flash Control Register $1" hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,This field is used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion" bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "0: The CS interval unit is 1 serial clock cycle,1: The CS interval unit is 256 serial clock cycle" newline bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10. "WA,Word Addressable" "0,1" newline bitfld.long 0x00 5.--9. "TCSH,Serial Flash CS Hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCSS,Serial Flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x78)++0x03 line.long 0x00 "FLSHCR1B$1,Flash Control Register $1" hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,This field is used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion" bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "0: The CS interval unit is 1 serial clock cycle,1: The CS interval unit is 256 serial clock cycle" newline bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10. "WA,Word Addressable" "0,1" newline bitfld.long 0x00 5.--9. "TCSH,Serial Flash CS Hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCSS,Serial Flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x80)++0x03 line.long 0x00 "FLSHCR2A$1,Flash Control Register 2" bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer which is internally saved pointer by JMP_ON_CS" "0,1" bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "0: The AWRWAIT unit is 2 ahb clock cycle,1: The AWRWAIT unit is 8 ahb clock cycle,2: The AWRWAIT unit is 32 ahb clock cycle,3: The AWRWAIT unit is 128 ahb clock cycle,4: The AWRWAIT unit is 512 ahb clock cycle,5: The AWRWAIT unit is 2048 ahb clock cycle,6: The AWRWAIT unit is 8192 ahb clock cycle,7: The AWRWAIT unit is 32768 ahb clock cycle" newline hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,For certain devices (such as FPGA) it need some time to write data into internal memory after the command sequences finished on FlexSPI interface" bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "AWRSEQID,Sequence Index for AHB Write triggered Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence Number for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. "ARDSEQID,Sequence Index for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x88)++0x03 line.long 0x00 "FLSHCR2B$1,Flash Control Register 2" bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer which is internally saved pointer by JMP_ON_CS" "0,1" bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "0: The AWRWAIT unit is 2 ahb clock cycle,1: The AWRWAIT unit is 8 ahb clock cycle,2: The AWRWAIT unit is 32 ahb clock cycle,3: The AWRWAIT unit is 128 ahb clock cycle,4: The AWRWAIT unit is 512 ahb clock cycle,5: The AWRWAIT unit is 2048 ahb clock cycle,6: The AWRWAIT unit is 8192 ahb clock cycle,7: The AWRWAIT unit is 32768 ahb clock cycle" newline hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,For certain devices (such as FPGA) it need some time to write data into internal memory after the command sequences finished on FlexSPI interface" bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "AWRSEQID,Sequence Index for AHB Write triggered Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence Number for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. "ARDSEQID,Sequence Index for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end group.long 0x94++0x03 line.long 0x00 "FLSHCR4,Flash Control Register 4" bitfld.long 0x00 3. "WMENB,Write mask enable bit for flash device on port B" "0: Write mask is disabled DQS(RWDS) pin will not..,1: Write mask is enabled DQS(RWDS) pin will be.." bitfld.long 0x00 2. "WMENA,Write mask enable bit for flash device on port A" "0: Write mask is disabled DQS(RWDS) pin will not..,1: Write mask is enabled DQS(RWDS) pin will be.." newline bitfld.long 0x00 1. "WMOPT2,Write mask option bit 2" "0: DQS pin will be used as Write Mask when..,1: DQS pin will not be used as Write Mask when.." bitfld.long 0x00 0. "WMOPT1,Write mask option bit 1" "0: DQS pin will be used as Write Mask when..,1: DQS pin will not be used as Write Mask when.." group.long 0xA0++0x03 line.long 0x00 "IPCR0,IP Control Register 0" hexmask.long 0x00 0.--31. 1. "SFAR,Serial Flash Address for IP command" group.long 0xA4++0x03 line.long 0x00 "IPCR1,IP Control Register 1" bitfld.long 0x00 31. "IPAREN,Parallel mode Enabled for IP command" "0: Flash will be accessed in Individual mode,1: Flash will be accessed in Parallel mode" bitfld.long 0x00 24.--26. "ISEQNUM,Sequence Number for IP command: ISEQNUM+1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "ISEQID,Sequence Index in LUT for IP command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "IDATSZ,Flash Read/Program Data Size (in Bytes) for IP command" group.long 0xB0++0x03 line.long 0x00 "IPCMD,IP Command Register" bitfld.long 0x00 0. "TRG,Setting this bit will trigger an IP Command" "0,1" group.long 0xB4++0x03 line.long 0x00 "DLPR,Data Learn Pattern Register" hexmask.long 0x00 0.--31. 1. "DLP,Data Learning Pattern" group.long 0xB8++0x03 line.long 0x00 "IPRXFCR,IP RX FIFO Control Register" hexmask.long.byte 0x00 2.--8. 1. "RXWMRK,Watermark level is (RXWMRK+1)*64 Bits" bitfld.long 0x00 1. "RXDMAEN,IP RX FIFO reading by DMA enabled" "0: IP RX FIFO would be read by processor,1: IP RX FIFO would be read by DMA" newline bitfld.long 0x00 0. "CLRIPRXF,Clear all valid data entries in IP RX FIFO" "0,1" group.long 0xBC++0x03 line.long 0x00 "IPTXFCR,IP TX FIFO Control Register" hexmask.long.byte 0x00 2.--8. 1. "TXWMRK,Watermark level is (TXWMRK+1)*64 Bits" bitfld.long 0x00 1. "TXDMAEN,IP TX FIFO filling by DMA enabled" "0: IP TX FIFO would be filled by processor,1: IP TX FIFO would be filled by DMA" newline bitfld.long 0x00 0. "CLRIPTXF,Clear all valid data entries in IP TX FIFO" "0,1" group.long 0xC0++0x03 line.long 0x00 "DLLCRA,DLL Control Register 0" bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "0,1" newline bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line is: ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock (serial root clock). If serial root clock is >= 100 MHz DLLEN set to 0x1 OVRDEN set to =0x0 then SLVDLYTARGET setting of 0xF is recommended" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. "DLLRESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "0,1" group.long 0xC4++0x03 line.long 0x00 "DLLCRB,DLL Control Register 0" bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "0,1" newline bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line is: ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock (serial root clock). If serial root clock is >= 100 MHz DLLEN set to 0x1 OVRDEN set to =0x0 then SLVDLYTARGET setting of 0xF is recommended" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. "DLLRESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "0,1" group.long 0xC8++0x03 line.long 0x00 "MISCCR2,Misc Control Register 2" bitfld.long 0x00 8. "IPEDMUX_SWRESET,This bit is software reset for IPED MUX.This bit is not auto-cleared by hardware" "0,1" bitfld.long 0x00 6. "OTFAD_SWRESET,This bit is software reset for OTFAD.It is connected to output.This bit is not auto-cleared by hardware" "0,1" newline bitfld.long 0x00 5. "RWDSOEOPT,FlexSPI controller could delay the RWDS (write mask) output enable desertion by one cycle to relax transmit timing" "0: RWDS output enable desertion is delayed by..,1: RWDS output enable desertion is not delayed.." bitfld.long 0x00 4. "DOEOPT,FlexSPI controller could delay the data lines output enable desertion by one cycle to relax transmit timing" "0: Data line output enable desertion is delayed..,1: Data line output enable desertion is not.." newline bitfld.long 0x00 2.--3. "PHASERSTOPT,SCLK/DQS output clock phase may need reset after a DDR sequence finished (high level)" "0: SCLK/DQS output phase will be reset 0.5 cycle..,1: SCLK/DQS output phase will be reset 1.5 cycle..,2: SCLK/DQS output phase will be reset 2.5 cycle..,3: SCLK/DQS output phase will be reset 3.5 cycle.." bitfld.long 0x00 0.--1. "LEARNPHASEGAP,The clock phase gap for data learning is: N delay cells delay (75ps~200ps for each delay cell)" "0: val0,1: val1,2: val2,3: val3" rgroup.long 0xE0++0x03 line.long 0x00 "STS0,Status Register 0" bitfld.long 0x00 8.--11. "DATALEARNPHASEB,Indicate the sampling clock phase selection on Port B after Data Learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. "DATALEARNPHASEA,Indicate the sampling clock phase selection on Port A after Data Learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2.--3. "ARBCMDSRC,This status field indicates the trigger source of current command sequence granted by arbitrator" "0: Triggered by AHB read command (triggered by..,1: Triggered by AHB write command (triggered by..,2: Triggered by IP command (triggered by setting..,3: Triggered by suspended command (resumed)" bitfld.long 0x00 1. "ARBIDLE,This status bit indicates the state machine in ARB_CTL is busy and there is command sequence granted by arbitrator and not finished yet on FlexSPI interface" "0,1" newline bitfld.long 0x00 0. "SEQIDLE,This status bit indicates the state machine in SEQ_CTL is idle and there is command sequence executing on FlexSPI interface" "0,1" rgroup.long 0xE4++0x03 line.long 0x00 "STS1,Status Register 1" bitfld.long 0x00 24.--27. "IPCMDERRCODE,Indicates the Error Code when IP command Error detected" "0: No error,?,2: IP command with JMP_ON_CS instruction used in..,3: There is unknown instruction opcode in the..,4: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in..,5: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in..,6: Flash access start address exceed the whole..,?,?,?,?,?,?,?,14: Sequence execution timeout,15: Flash boundary crossed" bitfld.long 0x00 16.--19. "IPCMDERRID,Indicates the sequence Index when IP command error detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "AHBCMDERRCODE,Indicates the Error Code when AHB command Error detected" "0: No error,?,2: AHB Write command with JMP_ON_CS instruction..,3: There is unknown instruction opcode in the..,4: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in..,5: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in..,?,?,?,?,?,?,?,?,14: Sequence execution timeout,?..." bitfld.long 0x00 0.--3. "AHBCMDERRID,Indicates the sequence index when an AHB command error is detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xE8++0x03 line.long 0x00 "STS2,Status Register 2" bitfld.long 0x00 24.--29. "BREFSEL,Flash B sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. "BSLVSEL,Flash B sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 17. "BREFLOCK,Flash B sample clock reference delay line locked" "0,1" bitfld.long 0x00 16. "BSLVLOCK,Flash B sample clock slave delay line locked" "0,1" newline bitfld.long 0x00 8.--13. "AREFSEL,Flash A sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 2.--7. "ASLVSEL,Flash A sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 1. "AREFLOCK,Flash A sample clock reference delay line locked" "0,1" bitfld.long 0x00 0. "ASLVLOCK,Flash A sample clock slave delay line locked" "0,1" rgroup.long 0xEC++0x03 line.long 0x00 "AHBSPNDSTS,AHB Suspend Status Register" hexmask.long.word 0x00 16.--31. 1. "DATLFT,Left Data size for suspended command sequence (in byte)" bitfld.long 0x00 1.--3. "BUFID,AHB RX BUF ID for suspended command sequence" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "ACTIVE,Indicates if an AHB read prefetch command sequence has been suspended" "0,1" rgroup.long 0xF0++0x03 line.long 0x00 "IPRXFSTS,IP RX FIFO Status Register" hexmask.long.word 0x00 16.--31. 1. "RDCNTR,Total Read Data Counter: RDCNTR * 64 Bits" hexmask.long.byte 0x00 0.--7. 1. "FILL,Fill level of IP RX FIFO" rgroup.long 0xF4++0x03 line.long 0x00 "IPTXFSTS,IP TX FIFO Status Register" hexmask.long.word 0x00 16.--31. 1. "WRCNTR,Total Write Data Counter: WRCNTR * 64 Bits" hexmask.long.byte 0x00 0.--7. 1. "FILL,Fill level of IP TX FIFO" rgroup.long 0xF8++0x03 line.long 0x00 "VERID,IP Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,MSB 8bit of Version ID of design version" hexmask.long.byte 0x00 16.--23. 1. "MINOR,LSB 8bit of Version ID of design version" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature of design version" repeat 32. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x100)++0x03 line.long 0x00 "RFDR[$1],IP RX FIFO Data Register x $1" hexmask.long 0x00 0.--31. 1. "RXDATA,RX Data" repeat.end repeat 32. (increment 0 1) (increment 0 0x04) wgroup.long ($2+0x180)++0x03 line.long 0x00 "TFDR[$1],IP TX FIFO Data Register x $1" hexmask.long 0x00 0.--31. 1. "TXDATA,TX Data" repeat.end repeat 64. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "LUT[$1],LUT x $1" bitfld.long 0x00 26.--31. "OPCODE1,OPCODE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 24.--25. "NUM_PADS1,NUM_PADS1" "0,1,2,3" newline hexmask.long.byte 0x00 16.--23. 1. "OPERAND1,OPERAND1" bitfld.long 0x00 10.--15. "OPCODE0,OPCODE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--9. "NUM_PADS0,NUM_PADS0" "0,1,2,3" hexmask.long.byte 0x00 0.--7. 1. "OPERAND0,OPERAND0" repeat.end tree.end tree "FLEXSPI2" base ad:0x29810000 group.long 0x00++0x03 line.long 0x00 "MCR0,Module Control Register 0" hexmask.long.byte 0x00 24.--31. 1. "AHBGRANTWAIT,Timeout wait cycle for AHB command grant" hexmask.long.byte 0x00 16.--23. 1. "IPGRANTWAIT,Timeout wait cycle for IP command grant" newline bitfld.long 0x00 15. "LEARNEN,This bit is used to enable/disable data learning feature" "0: Disable,1: Enable" bitfld.long 0x00 14. "SCKFREERUNEN,This bit is used to force SCLK output free-running" "0: Disable,1: Enable" newline bitfld.long 0x00 13. "COMBINATIONEN,This bit is to support Flash Octal mode access by combining Port A and B Data pins (A_DATA[3:0] and B_DATA[3:0]) when Port A and Port B are of 4 bit data width" "0: Disable,1: Enable" bitfld.long 0x00 12. "DOZEEN,Doze mode enable bit" "0: Doze mode support disabled,1: Doze mode support enabled" newline bitfld.long 0x00 11. "HSEN,Half Speed Serial Flash access Enable" "0: Disable divide by 2 of serial flash clock for..,1: Enable divide by 2 of serial flash clock for.." bitfld.long 0x00 8.--10. "SERCLKDIV,Serial root clock" "0: Divided by 1,1: Divided by 2,2: Divided by 3,3: Divided by 4,4: Divided by 5,5: Divided by 6,6: Divided by 7,7: Divided by 8" newline bitfld.long 0x00 7. "ATDFEN,Enable AHB bus Write Access to IP TX FIFO" "0: IP TX FIFO should be written by IP Bus,1: IP TX FIFO should be written by AHB Bus" bitfld.long 0x00 6. "ARDFEN,Enable AHB bus Read Access to IP RX FIFO" "0: IP RX FIFO should be read by IP Bus,1: IP RX FIFO should be read by AHB Bus" newline bitfld.long 0x00 4.--5. "RXCLKSRC,Sample Clock source selection for Flash Reading" "0: Dummy Read strobe generated by FlexSPI..,1: Dummy Read strobe generated by FlexSPI..,?,3: Flash provided Read strobe and input from DQS.." bitfld.long 0x00 1. "MDIS,Module Disable" "0,1" newline bitfld.long 0x00 0. "SWRESET,Software Reset" "0,1" group.long 0x04++0x03 line.long 0x00 "MCR1,Module Control Register 1" hexmask.long.word 0x00 16.--31. 1. "SEQWAIT,Command Sequence Execution will timeout and abort after SEQWAIT * 1024 Serial Root Clock cycles" hexmask.long.word 0x00 0.--15. 1. "AHBBUSWAIT,AHB Bus wait" group.long 0x08++0x03 line.long 0x00 "MCR2,Module Control Register 2" hexmask.long.byte 0x00 24.--31. 1. "RESUMEWAIT,Wait cycle (in AHB clock cycle) for idle state before suspended command sequence resumed" bitfld.long 0x00 23. "RX_CLK_SRC_DIFF,Sample Clock source or source_b selection for Flash Reading" "0,1" newline bitfld.long 0x00 21.--22. "RXCLKSRC_B,Sample Clock source selection for Flash Reading" "0: Dummy Read strobe generated by FlexSPI..,1: Dummy Read strobe generated by FlexSPI..,2: SCLK output clock and loopback from SCLK..,3: Flash provided Read strobe and input from DQS.." bitfld.long 0x00 19. "SCKBDIFFOPT,B_SCLK pad can be used as A_SCLK differential clock output (inverted clock to A_SCLK)" "0: B_SCLK pad is used as port B SCLK clock output,1: B_SCLK pad is used as port A SCLK inverted.." newline bitfld.long 0x00 15. "SAMEDEVICEEN,All external devices are same devices (both in types and size) for A1/A2/B1/B2" "0: In Individual mode..,1: FLSHA1CR0/FLSHA1CR1/FLSHA1CR2 register.." bitfld.long 0x00 14. "CLRLEARNPHASE,The sampling clock phase selection will be reset to phase 0 when this bit is written with 0x1" "0,1" newline bitfld.long 0x00 11. "CLRAHBBUFOPT,Clear AHB buffer" "0: AHB RX/TX Buffer will not be cleaned..,1: AHB RX/TX Buffer will be cleaned.." group.long 0x0C++0x03 line.long 0x00 "AHBCR,AHB Bus Control Register" bitfld.long 0x00 10. "READSZALIGN,AHB Read Size Alignment" "0: AHB read size will be decided by other..,1: AHB read size to up size to 8 bytes aligned.." bitfld.long 0x00 6. "READADDROPT,AHB Read Address option bit" "0: There is AHB read burst start address..,1: There is no AHB read burst start address.." newline bitfld.long 0x00 5. "PREFETCHEN,AHB Read Prefetch Enable" "0,1" bitfld.long 0x00 4. "BUFFERABLEEN,Enable AHB bus bufferable write access support" "0: Disabled,1: Enabled" newline bitfld.long 0x00 3. "CACHABLEEN,Enable AHB bus cachable read access support" "0: Disabled,1: Enabled" bitfld.long 0x00 0. "APAREN,Parallel mode enabled for AHB triggered Command (both read and write)" "0: Flash will be accessed in Individual mode,1: Flash will be accessed in Parallel mode" group.long 0x10++0x03 line.long 0x00 "INTEN,Interrupt Enable Register" bitfld.long 0x00 11. "SEQTIMEOUTEN,Sequence execution timeout interrupt enable" "0,1" bitfld.long 0x00 10. "AHBBUSTIMEOUTEN,AHB Bus timeout interrupt" "0,1" newline bitfld.long 0x00 9. "SCKSTOPBYWREN,SCLK is stopped during command sequence because Async TX FIFO empty interrupt enable" "0,1" bitfld.long 0x00 8. "SCKSTOPBYRDEN,SCLK is stopped during command sequence because Async RX FIFO full interrupt enable" "0,1" newline bitfld.long 0x00 7. "DATALEARNFAILEN,Data Learning failed interrupt enable" "0,1" bitfld.long 0x00 6. "IPTXWEEN,IP TX FIFO WaterMark empty interrupt enable" "0,1" newline bitfld.long 0x00 5. "IPRXWAEN,IP RX FIFO WaterMark available interrupt enable" "0,1" bitfld.long 0x00 4. "AHBCMDERREN,AHB triggered Command Sequences Error Detected interrupt enable" "0,1" newline bitfld.long 0x00 3. "IPCMDERREN,IP triggered Command Sequences Error Detected interrupt enable" "0,1" bitfld.long 0x00 2. "AHBCMDGEEN,AHB triggered Command Sequences Grant Timeout interrupt enable" "0,1" newline bitfld.long 0x00 1. "IPCMDGEEN,IP triggered Command Sequences Grant Timeout interrupt enable" "0,1" bitfld.long 0x00 0. "IPCMDDONEEN,IP triggered Command Sequences Execution finished interrupt enable" "0,1" group.long 0x14++0x03 line.long 0x00 "INTR,Interrupt Register" eventfld.long 0x00 11. "SEQTIMEOUT,Sequence execution timeout interrupt" "0,1" eventfld.long 0x00 10. "AHBBUSTIMEOUT,AHB Bus timeout interrupt" "0,1" newline eventfld.long 0x00 9. "SCKSTOPBYWR,SCLK is stopped during command sequence because Async TX FIFO empty interrupt" "0,1" eventfld.long 0x00 8. "SCKSTOPBYRD,SCLK is stopped during command sequence because Async RX FIFO full interrupt" "0,1" newline eventfld.long 0x00 7. "DATALEARNFAIL,Data Learning failed interrupt" "0,1" eventfld.long 0x00 6. "IPTXWE,IP TX FIFO watermark empty interrupt" "0,1" newline eventfld.long 0x00 5. "IPRXWA,IP RX FIFO watermark available interrupt" "0,1" eventfld.long 0x00 4. "AHBCMDERR,AHB triggered Command Sequences Error Detected interrupt" "0,1" newline eventfld.long 0x00 3. "IPCMDERR,IP triggered Command Sequences Error Detected interrupt" "0,1" eventfld.long 0x00 2. "AHBCMDGE,AHB triggered Command Sequences Grant Timeout interrupt" "0,1" newline eventfld.long 0x00 1. "IPCMDGE,IP triggered Command Sequences Grant Timeout interrupt" "0,1" eventfld.long 0x00 0. "IPCMDDONE,IP triggered Command Sequences Execution finished interrupt" "0,1" group.long 0x18++0x03 line.long 0x00 "LUTKEY,LUT Key Register" hexmask.long 0x00 0.--31. 1. "KEY,The Key to lock or unlock LUT" group.long 0x1C++0x03 line.long 0x00 "LUTCR,LUT Control Register" bitfld.long 0x00 1. "UNLOCK,Unlock LUT" "0,1" bitfld.long 0x00 0. "LOCK,Lock LUT" "0,1" group.long 0x20++0x03 line.long 0x00 "AHBRXBUF0CR0,AHB RX Buffer 0 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x24++0x03 line.long 0x00 "AHBRXBUF1CR0,AHB RX Buffer 1 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x28++0x03 line.long 0x00 "AHBRXBUF2CR0,AHB RX Buffer 2 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x2C++0x03 line.long 0x00 "AHBRXBUF3CR0,AHB RX Buffer 3 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x30++0x03 line.long 0x00 "AHBRXBUF4CR0,AHB RX Buffer 4 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x34++0x03 line.long 0x00 "AHBRXBUF5CR0,AHB RX Buffer 5 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x38++0x03 line.long 0x00 "AHBRXBUF6CR0,AHB RX Buffer 6 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x3C++0x03 line.long 0x00 "AHBRXBUF7CR0,AHB RX Buffer 7 Control Register 0" bitfld.long 0x00 31. "PREFETCHEN,AHB Read Prefetch Enable for current AHB RX Buffer corresponding Master" "0,1" bitfld.long 0x00 24.--26. "PRIORITY,This priority for AHB Master Read which this AHB RX Buffer is assigned" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "MSTRID,This AHB RX Buffer is assigned according to AHB Master with ID (MSTR_ID)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX Buffer Size in 64 bits" group.long 0x60++0x03 line.long 0x00 "FLSHA1CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x64++0x03 line.long 0x00 "FLSHA2CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x68++0x03 line.long 0x00 "FLSHB1CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" group.long 0x6C++0x03 line.long 0x00 "FLSHB2CR0,Flash Control Register 0" hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash Size in KByte" repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x70)++0x03 line.long 0x00 "FLSHCR1A$1,Flash Control Register $1" hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,This field is used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion" bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "0: The CS interval unit is 1 serial clock cycle,1: The CS interval unit is 256 serial clock cycle" newline bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10. "WA,Word Addressable" "0,1" newline bitfld.long 0x00 5.--9. "TCSH,Serial Flash CS Hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCSS,Serial Flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x78)++0x03 line.long 0x00 "FLSHCR1B$1,Flash Control Register $1" hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,This field is used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion" bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "0: The CS interval unit is 1 serial clock cycle,1: The CS interval unit is 256 serial clock cycle" newline bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10. "WA,Word Addressable" "0,1" newline bitfld.long 0x00 5.--9. "TCSH,Serial Flash CS Hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCSS,Serial Flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x80)++0x03 line.long 0x00 "FLSHCR2A$1,Flash Control Register 2" bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer which is internally saved pointer by JMP_ON_CS" "0,1" bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "0: The AWRWAIT unit is 2 ahb clock cycle,1: The AWRWAIT unit is 8 ahb clock cycle,2: The AWRWAIT unit is 32 ahb clock cycle,3: The AWRWAIT unit is 128 ahb clock cycle,4: The AWRWAIT unit is 512 ahb clock cycle,5: The AWRWAIT unit is 2048 ahb clock cycle,6: The AWRWAIT unit is 8192 ahb clock cycle,7: The AWRWAIT unit is 32768 ahb clock cycle" newline hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,For certain devices (such as FPGA) it need some time to write data into internal memory after the command sequences finished on FlexSPI interface" bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "AWRSEQID,Sequence Index for AHB Write triggered Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence Number for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. "ARDSEQID,Sequence Index for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end repeat 2. (strings "1" "2" )(list 0x0 0x4 ) group.long ($2+0x88)++0x03 line.long 0x00 "FLSHCR2B$1,Flash Control Register 2" bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer which is internally saved pointer by JMP_ON_CS" "0,1" bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "0: The AWRWAIT unit is 2 ahb clock cycle,1: The AWRWAIT unit is 8 ahb clock cycle,2: The AWRWAIT unit is 32 ahb clock cycle,3: The AWRWAIT unit is 128 ahb clock cycle,4: The AWRWAIT unit is 512 ahb clock cycle,5: The AWRWAIT unit is 2048 ahb clock cycle,6: The AWRWAIT unit is 8192 ahb clock cycle,7: The AWRWAIT unit is 32768 ahb clock cycle" newline hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,For certain devices (such as FPGA) it need some time to write data into internal memory after the command sequences finished on FlexSPI interface" bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "AWRSEQID,Sequence Index for AHB Write triggered Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence Number for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. "ARDSEQID,Sequence Index for AHB Read triggered Command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end group.long 0x94++0x03 line.long 0x00 "FLSHCR4,Flash Control Register 4" bitfld.long 0x00 3. "WMENB,Write mask enable bit for flash device on port B" "0: Write mask is disabled DQS(RWDS) pin will not..,1: Write mask is enabled DQS(RWDS) pin will be.." bitfld.long 0x00 2. "WMENA,Write mask enable bit for flash device on port A" "0: Write mask is disabled DQS(RWDS) pin will not..,1: Write mask is enabled DQS(RWDS) pin will be.." newline bitfld.long 0x00 1. "WMOPT2,Write mask option bit 2" "0: DQS pin will be used as Write Mask when..,1: DQS pin will not be used as Write Mask when.." bitfld.long 0x00 0. "WMOPT1,Write mask option bit 1" "0: DQS pin will be used as Write Mask when..,1: DQS pin will not be used as Write Mask when.." group.long 0xA0++0x03 line.long 0x00 "IPCR0,IP Control Register 0" hexmask.long 0x00 0.--31. 1. "SFAR,Serial Flash Address for IP command" group.long 0xA4++0x03 line.long 0x00 "IPCR1,IP Control Register 1" bitfld.long 0x00 31. "IPAREN,Parallel mode Enabled for IP command" "0: Flash will be accessed in Individual mode,1: Flash will be accessed in Parallel mode" bitfld.long 0x00 24.--26. "ISEQNUM,Sequence Number for IP command: ISEQNUM+1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--19. "ISEQID,Sequence Index in LUT for IP command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "IDATSZ,Flash Read/Program Data Size (in Bytes) for IP command" group.long 0xB0++0x03 line.long 0x00 "IPCMD,IP Command Register" bitfld.long 0x00 0. "TRG,Setting this bit will trigger an IP Command" "0,1" group.long 0xB4++0x03 line.long 0x00 "DLPR,Data Learn Pattern Register" hexmask.long 0x00 0.--31. 1. "DLP,Data Learning Pattern" group.long 0xB8++0x03 line.long 0x00 "IPRXFCR,IP RX FIFO Control Register" hexmask.long.byte 0x00 2.--8. 1. "RXWMRK,Watermark level is (RXWMRK+1)*64 Bits" bitfld.long 0x00 1. "RXDMAEN,IP RX FIFO reading by DMA enabled" "0: IP RX FIFO would be read by processor,1: IP RX FIFO would be read by DMA" newline bitfld.long 0x00 0. "CLRIPRXF,Clear all valid data entries in IP RX FIFO" "0,1" group.long 0xBC++0x03 line.long 0x00 "IPTXFCR,IP TX FIFO Control Register" hexmask.long.byte 0x00 2.--8. 1. "TXWMRK,Watermark level is (TXWMRK+1)*64 Bits" bitfld.long 0x00 1. "TXDMAEN,IP TX FIFO filling by DMA enabled" "0: IP TX FIFO would be filled by processor,1: IP TX FIFO would be filled by DMA" newline bitfld.long 0x00 0. "CLRIPTXF,Clear all valid data entries in IP TX FIFO" "0,1" group.long 0xC0++0x03 line.long 0x00 "DLLCRA,DLL Control Register 0" bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "0,1" newline bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line is: ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock (serial root clock). If serial root clock is >= 100 MHz DLLEN set to 0x1 OVRDEN set to =0x0 then SLVDLYTARGET setting of 0xF is recommended" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. "DLLRESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "0,1" group.long 0xC4++0x03 line.long 0x00 "DLLCRB,DLL Control Register 0" bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "0,1" newline bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line is: ((SLVDLYTARGET+1) * 1/32 * clock cycle of reference clock (serial root clock). If serial root clock is >= 100 MHz DLLEN set to 0x1 OVRDEN set to =0x0 then SLVDLYTARGET setting of 0xF is recommended" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. "DLLRESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "0,1" group.long 0xC8++0x03 line.long 0x00 "MISCCR2,Misc Control Register 2" bitfld.long 0x00 8. "IPEDMUX_SWRESET,This bit is software reset for IPED MUX.This bit is not auto-cleared by hardware" "0,1" bitfld.long 0x00 6. "OTFAD_SWRESET,This bit is software reset for OTFAD.It is connected to output.This bit is not auto-cleared by hardware" "0,1" newline bitfld.long 0x00 5. "RWDSOEOPT,FlexSPI controller could delay the RWDS (write mask) output enable desertion by one cycle to relax transmit timing" "0: RWDS output enable desertion is delayed by..,1: RWDS output enable desertion is not delayed.." bitfld.long 0x00 4. "DOEOPT,FlexSPI controller could delay the data lines output enable desertion by one cycle to relax transmit timing" "0: Data line output enable desertion is delayed..,1: Data line output enable desertion is not.." newline bitfld.long 0x00 2.--3. "PHASERSTOPT,SCLK/DQS output clock phase may need reset after a DDR sequence finished (high level)" "0: SCLK/DQS output phase will be reset 0.5 cycle..,1: SCLK/DQS output phase will be reset 1.5 cycle..,2: SCLK/DQS output phase will be reset 2.5 cycle..,3: SCLK/DQS output phase will be reset 3.5 cycle.." bitfld.long 0x00 0.--1. "LEARNPHASEGAP,The clock phase gap for data learning is: N delay cells delay (75ps~200ps for each delay cell)" "0: val0,1: val1,2: val2,3: val3" rgroup.long 0xE0++0x03 line.long 0x00 "STS0,Status Register 0" bitfld.long 0x00 8.--11. "DATALEARNPHASEB,Indicate the sampling clock phase selection on Port B after Data Learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. "DATALEARNPHASEA,Indicate the sampling clock phase selection on Port A after Data Learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2.--3. "ARBCMDSRC,This status field indicates the trigger source of current command sequence granted by arbitrator" "0: Triggered by AHB read command (triggered by..,1: Triggered by AHB write command (triggered by..,2: Triggered by IP command (triggered by setting..,3: Triggered by suspended command (resumed)" bitfld.long 0x00 1. "ARBIDLE,This status bit indicates the state machine in ARB_CTL is busy and there is command sequence granted by arbitrator and not finished yet on FlexSPI interface" "0,1" newline bitfld.long 0x00 0. "SEQIDLE,This status bit indicates the state machine in SEQ_CTL is idle and there is command sequence executing on FlexSPI interface" "0,1" rgroup.long 0xE4++0x03 line.long 0x00 "STS1,Status Register 1" bitfld.long 0x00 24.--27. "IPCMDERRCODE,Indicates the Error Code when IP command Error detected" "0: No error,?,2: IP command with JMP_ON_CS instruction used in..,3: There is unknown instruction opcode in the..,4: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in..,5: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in..,6: Flash access start address exceed the whole..,?,?,?,?,?,?,?,14: Sequence execution timeout,15: Flash boundary crossed" bitfld.long 0x00 16.--19. "IPCMDERRID,Indicates the sequence Index when IP command error detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "AHBCMDERRCODE,Indicates the Error Code when AHB command Error detected" "0: No error,?,2: AHB Write command with JMP_ON_CS instruction..,3: There is unknown instruction opcode in the..,4: Instruction DUMMY_SDR/DUMMY_RWDS_SDR used in..,5: Instruction DUMMY_DDR/DUMMY_RWDS_DDR used in..,?,?,?,?,?,?,?,?,14: Sequence execution timeout,?..." bitfld.long 0x00 0.--3. "AHBCMDERRID,Indicates the sequence index when an AHB command error is detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xE8++0x03 line.long 0x00 "STS2,Status Register 2" bitfld.long 0x00 24.--29. "BREFSEL,Flash B sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. "BSLVSEL,Flash B sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 17. "BREFLOCK,Flash B sample clock reference delay line locked" "0,1" bitfld.long 0x00 16. "BSLVLOCK,Flash B sample clock slave delay line locked" "0,1" newline bitfld.long 0x00 8.--13. "AREFSEL,Flash A sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 2.--7. "ASLVSEL,Flash A sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 1. "AREFLOCK,Flash A sample clock reference delay line locked" "0,1" bitfld.long 0x00 0. "ASLVLOCK,Flash A sample clock slave delay line locked" "0,1" rgroup.long 0xEC++0x03 line.long 0x00 "AHBSPNDSTS,AHB Suspend Status Register" hexmask.long.word 0x00 16.--31. 1. "DATLFT,Left Data size for suspended command sequence (in byte)" bitfld.long 0x00 1.--3. "BUFID,AHB RX BUF ID for suspended command sequence" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "ACTIVE,Indicates if an AHB read prefetch command sequence has been suspended" "0,1" rgroup.long 0xF0++0x03 line.long 0x00 "IPRXFSTS,IP RX FIFO Status Register" hexmask.long.word 0x00 16.--31. 1. "RDCNTR,Total Read Data Counter: RDCNTR * 64 Bits" hexmask.long.byte 0x00 0.--7. 1. "FILL,Fill level of IP RX FIFO" rgroup.long 0xF4++0x03 line.long 0x00 "IPTXFSTS,IP TX FIFO Status Register" hexmask.long.word 0x00 16.--31. 1. "WRCNTR,Total Write Data Counter: WRCNTR * 64 Bits" hexmask.long.byte 0x00 0.--7. 1. "FILL,Fill level of IP TX FIFO" rgroup.long 0xF8++0x03 line.long 0x00 "VERID,IP Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,MSB 8bit of Version ID of design version" hexmask.long.byte 0x00 16.--23. 1. "MINOR,LSB 8bit of Version ID of design version" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature of design version" repeat 32. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x100)++0x03 line.long 0x00 "RFDR[$1],IP RX FIFO Data Register x $1" hexmask.long 0x00 0.--31. 1. "RXDATA,RX Data" repeat.end repeat 32. (increment 0 1) (increment 0 0x04) wgroup.long ($2+0x180)++0x03 line.long 0x00 "TFDR[$1],IP TX FIFO Data Register x $1" hexmask.long 0x00 0.--31. 1. "TXDATA,TX Data" repeat.end repeat 64. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "LUT[$1],LUT x $1" bitfld.long 0x00 26.--31. "OPCODE1,OPCODE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 24.--25. "NUM_PADS1,NUM_PADS1" "0,1,2,3" newline hexmask.long.byte 0x00 16.--23. 1. "OPERAND1,OPERAND1" bitfld.long 0x00 10.--15. "OPCODE0,OPCODE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--9. "NUM_PADS0,NUM_PADS0" "0,1,2,3" hexmask.long.byte 0x00 0.--7. 1. "OPERAND0,OPERAND0" repeat.end group.long 0x420++0x03 line.long 0x00 "HADDRSTART,HADDR REMAP START ADDR" hexmask.long.tbyte 0x00 12.--31. 1. "ADDRSTART,HADDR start address" bitfld.long 0x00 0. "REMAPEN,AHB Bus address remap function enable" "0: HADDR REMAP Disabled,1: HADDR REMAP Enabled" group.long 0x424++0x03 line.long 0x00 "HADDREND,HADDR REMAP END ADDR" hexmask.long.tbyte 0x00 12.--31. 1. "ENDSTART,HADDR remap range's end addr 4K aligned" group.long 0x428++0x03 line.long 0x00 "HADDROFFSET,HADDR REMAP OFFSET" hexmask.long.tbyte 0x00 12.--31. 1. "ADDROFFSET,HADDR offset field remapped address will be ADDR[31:12]=ADDR_original[31:12]+ADDROFFSET" tree.end tree.end tree "GPIO (General Purpose I/O Ports And Peripheral I/O Lines)" tree "GPIOA" base ad:0x28800000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--3. "IRQNUM,Interrupt Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x0C++0x03 line.long 0x00 "LOCK,Lock Register" bitfld.long 0x00 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x00 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x00 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x00 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." group.long 0x10++0x03 line.long 0x00 "PCNS,Pin Control Non-Secure" bitfld.long 0x00 31. "NSE31,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 30. "NSE30,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 29. "NSE29,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 28. "NSE28,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 27. "NSE27,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 26. "NSE26,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 25. "NSE25,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 24. "NSE24,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 23. "NSE23,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 22. "NSE22,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 21. "NSE21,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 20. "NSE20,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 19. "NSE19,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 18. "NSE18,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 17. "NSE17,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 16. "NSE16,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 15. "NSE15,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 14. "NSE14,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 13. "NSE13,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 12. "NSE12,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 11. "NSE11,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 10. "NSE10,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 9. "NSE9,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 8. "NSE8,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 7. "NSE7,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 6. "NSE6,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 5. "NSE5,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 4. "NSE4,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" group.long 0x14++0x03 line.long 0x00 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." group.long 0x18++0x03 line.long 0x00 "PCNP,Pin Control Non-Privilege" bitfld.long 0x00 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." group.long 0x1C++0x03 line.long 0x00 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" group.long 0x40++0x03 line.long 0x00 "PDOR,Port Data Output Register" bitfld.long 0x00 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." group.long 0x44++0x03 line.long 0x00 "PSOR,Port Set Output Register" bitfld.long 0x00 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." group.long 0x48++0x03 line.long 0x00 "PCOR,Port Clear Output Register" bitfld.long 0x00 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." group.long 0x4C++0x03 line.long 0x00 "PTOR,Port Toggle Output Register" bitfld.long 0x00 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." rgroup.long 0x50++0x03 line.long 0x00 "PDIR,Port Data Input Register" bitfld.long 0x00 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" group.long 0x54++0x03 line.long 0x00 "PDDR,Port Data Direction Register" bitfld.long 0x00 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." group.long 0x58++0x03 line.long 0x00 "PIDR,Port Input Disable Register" bitfld.long 0x00 31. "PID31,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 30. "PID30,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 29. "PID29,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 28. "PID28,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 27. "PID27,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 26. "PID26,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 25. "PID25,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 24. "PID24,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 23. "PID23,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 22. "PID22,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 21. "PID21,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 20. "PID20,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 19. "PID19,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 18. "PID18,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 17. "PID17,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 16. "PID16,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 15. "PID15,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 14. "PID14,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 13. "PID13,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 12. "PID12,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 11. "PID11,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 10. "PID10,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 9. "PID9,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 8. "PID8,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 7. "PID7,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 6. "PID6,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 5. "PID5,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 4. "PID4,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 3. "PID3,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 2. "PID2,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 1. "PID1,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 0. "PID0,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" repeat 32. (increment 0 1) (increment 0 0x1) group.byte ($2+0x60)++0x00 line.byte 0x00 "PDR[$1],Pin Data Register a $1" bitfld.byte 0x00 0. "PD,Pin Data" "0: Pin logic level is logic zero or not..,1: Pin logic level is logic one" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end repeat 9. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0xC0)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end group.long 0x100++0x03 line.long 0x00 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." group.long 0x104++0x03 line.long 0x00 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x120)++0x03 line.long 0x00 "ISFR[$1],Interrupt Status Flag Register $1" eventfld.long 0x00 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." repeat.end tree.end tree "GPIOB" base ad:0x28810000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--3. "IRQNUM,Interrupt Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x0C++0x03 line.long 0x00 "LOCK,Lock Register" bitfld.long 0x00 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x00 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x00 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x00 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." group.long 0x10++0x03 line.long 0x00 "PCNS,Pin Control Non-Secure" bitfld.long 0x00 31. "NSE31,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 30. "NSE30,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 29. "NSE29,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 28. "NSE28,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 27. "NSE27,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 26. "NSE26,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 25. "NSE25,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 24. "NSE24,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 23. "NSE23,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 22. "NSE22,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 21. "NSE21,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 20. "NSE20,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 19. "NSE19,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 18. "NSE18,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 17. "NSE17,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 16. "NSE16,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 15. "NSE15,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 14. "NSE14,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 13. "NSE13,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 12. "NSE12,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 11. "NSE11,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 10. "NSE10,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 9. "NSE9,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 8. "NSE8,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 7. "NSE7,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 6. "NSE6,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 5. "NSE5,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 4. "NSE4,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" group.long 0x14++0x03 line.long 0x00 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." group.long 0x18++0x03 line.long 0x00 "PCNP,Pin Control Non-Privilege" bitfld.long 0x00 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." group.long 0x1C++0x03 line.long 0x00 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" group.long 0x40++0x03 line.long 0x00 "PDOR,Port Data Output Register" bitfld.long 0x00 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." group.long 0x44++0x03 line.long 0x00 "PSOR,Port Set Output Register" bitfld.long 0x00 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." group.long 0x48++0x03 line.long 0x00 "PCOR,Port Clear Output Register" bitfld.long 0x00 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." group.long 0x4C++0x03 line.long 0x00 "PTOR,Port Toggle Output Register" bitfld.long 0x00 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." rgroup.long 0x50++0x03 line.long 0x00 "PDIR,Port Data Input Register" bitfld.long 0x00 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" group.long 0x54++0x03 line.long 0x00 "PDDR,Port Data Direction Register" bitfld.long 0x00 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." group.long 0x58++0x03 line.long 0x00 "PIDR,Port Input Disable Register" bitfld.long 0x00 31. "PID31,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 30. "PID30,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 29. "PID29,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 28. "PID28,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 27. "PID27,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 26. "PID26,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 25. "PID25,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 24. "PID24,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 23. "PID23,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 22. "PID22,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 21. "PID21,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 20. "PID20,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 19. "PID19,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 18. "PID18,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 17. "PID17,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 16. "PID16,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 15. "PID15,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 14. "PID14,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 13. "PID13,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 12. "PID12,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 11. "PID11,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 10. "PID10,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 9. "PID9,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 8. "PID8,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 7. "PID7,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 6. "PID6,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 5. "PID5,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 4. "PID4,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 3. "PID3,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 2. "PID2,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 1. "PID1,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 0. "PID0,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" repeat 32. (increment 0 1) (increment 0 0x1) group.byte ($2+0x60)++0x00 line.byte 0x00 "PDR[$1],Pin Data Register a $1" bitfld.byte 0x00 0. "PD,Pin Data" "0: Pin logic level is logic zero or not..,1: Pin logic level is logic one" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end group.long 0x100++0x03 line.long 0x00 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." group.long 0x104++0x03 line.long 0x00 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x120)++0x03 line.long 0x00 "ISFR[$1],Interrupt Status Flag Register $1" eventfld.long 0x00 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." repeat.end tree.end tree "GPIOC" base ad:0x28820000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--3. "IRQNUM,Interrupt Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x0C++0x03 line.long 0x00 "LOCK,Lock Register" bitfld.long 0x00 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x00 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x00 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x00 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." group.long 0x10++0x03 line.long 0x00 "PCNS,Pin Control Non-Secure" bitfld.long 0x00 31. "NSE31,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 30. "NSE30,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 29. "NSE29,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 28. "NSE28,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 27. "NSE27,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 26. "NSE26,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 25. "NSE25,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 24. "NSE24,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 23. "NSE23,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 22. "NSE22,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 21. "NSE21,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 20. "NSE20,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 19. "NSE19,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 18. "NSE18,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 17. "NSE17,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 16. "NSE16,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 15. "NSE15,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 14. "NSE14,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 13. "NSE13,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 12. "NSE12,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 11. "NSE11,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 10. "NSE10,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 9. "NSE9,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 8. "NSE8,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 7. "NSE7,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 6. "NSE6,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 5. "NSE5,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 4. "NSE4,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" group.long 0x14++0x03 line.long 0x00 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." group.long 0x18++0x03 line.long 0x00 "PCNP,Pin Control Non-Privilege" bitfld.long 0x00 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." group.long 0x1C++0x03 line.long 0x00 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" group.long 0x40++0x03 line.long 0x00 "PDOR,Port Data Output Register" bitfld.long 0x00 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." group.long 0x44++0x03 line.long 0x00 "PSOR,Port Set Output Register" bitfld.long 0x00 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." group.long 0x48++0x03 line.long 0x00 "PCOR,Port Clear Output Register" bitfld.long 0x00 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." group.long 0x4C++0x03 line.long 0x00 "PTOR,Port Toggle Output Register" bitfld.long 0x00 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." rgroup.long 0x50++0x03 line.long 0x00 "PDIR,Port Data Input Register" bitfld.long 0x00 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" group.long 0x54++0x03 line.long 0x00 "PDDR,Port Data Direction Register" bitfld.long 0x00 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." group.long 0x58++0x03 line.long 0x00 "PIDR,Port Input Disable Register" bitfld.long 0x00 31. "PID31,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 30. "PID30,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 29. "PID29,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 28. "PID28,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 27. "PID27,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 26. "PID26,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 25. "PID25,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 24. "PID24,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 23. "PID23,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 22. "PID22,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 21. "PID21,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 20. "PID20,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 19. "PID19,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 18. "PID18,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 17. "PID17,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 16. "PID16,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 15. "PID15,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 14. "PID14,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 13. "PID13,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 12. "PID12,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 11. "PID11,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 10. "PID10,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 9. "PID9,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 8. "PID8,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 7. "PID7,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 6. "PID6,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 5. "PID5,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 4. "PID4,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 3. "PID3,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 2. "PID2,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 1. "PID1,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 0. "PID0,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" repeat 32. (increment 0 1) (increment 0 0x1) group.byte ($2+0x60)++0x00 line.byte 0x00 "PDR[$1],Pin Data Register a $1" bitfld.byte 0x00 0. "PD,Pin Data" "0: Pin logic level is logic zero or not..,1: Pin logic level is logic one" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end repeat 8. (strings "16" "17" "18" "19" "20" "21" "22" "23" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C ) group.long ($2+0xC0)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end group.long 0x100++0x03 line.long 0x00 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." group.long 0x104++0x03 line.long 0x00 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x120)++0x03 line.long 0x00 "ISFR[$1],Interrupt Status Flag Register $1" eventfld.long 0x00 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." repeat.end tree.end tree "GPIOD" base ad:0x2E200000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--3. "IRQNUM,Interrupt Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x0C++0x03 line.long 0x00 "LOCK,Lock Register" bitfld.long 0x00 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x00 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x00 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x00 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." group.long 0x10++0x03 line.long 0x00 "PCNS,Pin Control Non-Secure" bitfld.long 0x00 31. "NSE31,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 30. "NSE30,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 29. "NSE29,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 28. "NSE28,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 27. "NSE27,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 26. "NSE26,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 25. "NSE25,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 24. "NSE24,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 23. "NSE23,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 22. "NSE22,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 21. "NSE21,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 20. "NSE20,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 19. "NSE19,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 18. "NSE18,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 17. "NSE17,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 16. "NSE16,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 15. "NSE15,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 14. "NSE14,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 13. "NSE13,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 12. "NSE12,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 11. "NSE11,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 10. "NSE10,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 9. "NSE9,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 8. "NSE8,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 7. "NSE7,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 6. "NSE6,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 5. "NSE5,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 4. "NSE4,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" group.long 0x14++0x03 line.long 0x00 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." group.long 0x18++0x03 line.long 0x00 "PCNP,Pin Control Non-Privilege" bitfld.long 0x00 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." group.long 0x1C++0x03 line.long 0x00 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" group.long 0x40++0x03 line.long 0x00 "PDOR,Port Data Output Register" bitfld.long 0x00 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." group.long 0x44++0x03 line.long 0x00 "PSOR,Port Set Output Register" bitfld.long 0x00 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." group.long 0x48++0x03 line.long 0x00 "PCOR,Port Clear Output Register" bitfld.long 0x00 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." group.long 0x4C++0x03 line.long 0x00 "PTOR,Port Toggle Output Register" bitfld.long 0x00 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." rgroup.long 0x50++0x03 line.long 0x00 "PDIR,Port Data Input Register" bitfld.long 0x00 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" group.long 0x54++0x03 line.long 0x00 "PDDR,Port Data Direction Register" bitfld.long 0x00 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." group.long 0x58++0x03 line.long 0x00 "PIDR,Port Input Disable Register" bitfld.long 0x00 31. "PID31,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 30. "PID30,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 29. "PID29,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 28. "PID28,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 27. "PID27,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 26. "PID26,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 25. "PID25,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 24. "PID24,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 23. "PID23,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 22. "PID22,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 21. "PID21,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 20. "PID20,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 19. "PID19,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 18. "PID18,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 17. "PID17,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 16. "PID16,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 15. "PID15,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 14. "PID14,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 13. "PID13,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 12. "PID12,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 11. "PID11,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 10. "PID10,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 9. "PID9,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 8. "PID8,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 7. "PID7,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 6. "PID6,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 5. "PID5,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 4. "PID4,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 3. "PID3,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 2. "PID2,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 1. "PID1,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 0. "PID0,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" repeat 32. (increment 0 1) (increment 0 0x1) group.byte ($2+0x60)++0x00 line.byte 0x00 "PDR[$1],Pin Data Register a $1" bitfld.byte 0x00 0. "PD,Pin Data" "0: Pin logic level is logic zero or not..,1: Pin logic level is logic one" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end repeat 8. (strings "16" "17" "18" "19" "20" "21" "22" "23" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C ) group.long ($2+0xC0)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end group.long 0x100++0x03 line.long 0x00 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." group.long 0x104++0x03 line.long 0x00 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x120)++0x03 line.long 0x00 "ISFR[$1],Interrupt Status Flag Register $1" eventfld.long 0x00 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." repeat.end tree.end tree "GPIOE" base ad:0x2D000000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--3. "IRQNUM,Interrupt Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x0C++0x03 line.long 0x00 "LOCK,Lock Register" bitfld.long 0x00 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x00 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x00 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x00 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." group.long 0x10++0x03 line.long 0x00 "PCNS,Pin Control Non-Secure" bitfld.long 0x00 31. "NSE31,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 30. "NSE30,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 29. "NSE29,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 28. "NSE28,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 27. "NSE27,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 26. "NSE26,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 25. "NSE25,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 24. "NSE24,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 23. "NSE23,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 22. "NSE22,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 21. "NSE21,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 20. "NSE20,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 19. "NSE19,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 18. "NSE18,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 17. "NSE17,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 16. "NSE16,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 15. "NSE15,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 14. "NSE14,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 13. "NSE13,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 12. "NSE12,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 11. "NSE11,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 10. "NSE10,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 9. "NSE9,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 8. "NSE8,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 7. "NSE7,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 6. "NSE6,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 5. "NSE5,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 4. "NSE4,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" group.long 0x14++0x03 line.long 0x00 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." group.long 0x18++0x03 line.long 0x00 "PCNP,Pin Control Non-Privilege" bitfld.long 0x00 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." group.long 0x1C++0x03 line.long 0x00 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" group.long 0x40++0x03 line.long 0x00 "PDOR,Port Data Output Register" bitfld.long 0x00 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." group.long 0x44++0x03 line.long 0x00 "PSOR,Port Set Output Register" bitfld.long 0x00 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." group.long 0x48++0x03 line.long 0x00 "PCOR,Port Clear Output Register" bitfld.long 0x00 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." group.long 0x4C++0x03 line.long 0x00 "PTOR,Port Toggle Output Register" bitfld.long 0x00 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." rgroup.long 0x50++0x03 line.long 0x00 "PDIR,Port Data Input Register" bitfld.long 0x00 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" group.long 0x54++0x03 line.long 0x00 "PDDR,Port Data Direction Register" bitfld.long 0x00 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." group.long 0x58++0x03 line.long 0x00 "PIDR,Port Input Disable Register" bitfld.long 0x00 31. "PID31,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 30. "PID30,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 29. "PID29,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 28. "PID28,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 27. "PID27,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 26. "PID26,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 25. "PID25,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 24. "PID24,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 23. "PID23,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 22. "PID22,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 21. "PID21,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 20. "PID20,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 19. "PID19,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 18. "PID18,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 17. "PID17,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 16. "PID16,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 15. "PID15,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 14. "PID14,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 13. "PID13,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 12. "PID12,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 11. "PID11,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 10. "PID10,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 9. "PID9,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 8. "PID8,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 7. "PID7,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 6. "PID6,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 5. "PID5,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 4. "PID4,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 3. "PID3,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 2. "PID2,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 1. "PID1,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 0. "PID0,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" repeat 32. (increment 0 1) (increment 0 0x1) group.byte ($2+0x60)++0x00 line.byte 0x00 "PDR[$1],Pin Data Register a $1" bitfld.byte 0x00 0. "PD,Pin Data" "0: Pin logic level is logic zero or not..,1: Pin logic level is logic one" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end repeat 8. (strings "16" "17" "18" "19" "20" "21" "22" "23" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C ) group.long ($2+0xC0)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end group.long 0x100++0x03 line.long 0x00 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." group.long 0x104++0x03 line.long 0x00 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x120)++0x03 line.long 0x00 "ISFR[$1],Interrupt Status Flag Register $1" eventfld.long 0x00 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." repeat.end tree.end tree "GPIOF" base ad:0x2D010000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 0.--3. "IRQNUM,Interrupt Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x0C++0x03 line.long 0x00 "LOCK,Lock Register" bitfld.long 0x00 3. "ICNP,Lock ICNP" "0: ICNP register is writable by software in..,1: ICNP register is not writable until the next.." bitfld.long 0x00 2. "PCNP,Lock PCNP" "0: PCNP register is writable by software in..,1: PCNP register is not writable until the next.." newline bitfld.long 0x00 1. "ICNS,Lock ICNS" "0: ICNS register is writable by software in..,1: ICNS register is not writable until the next.." bitfld.long 0x00 0. "PCNS,Lock PCNS" "0: PCNS register is writable by software in..,1: PCNS register is not writable until the next.." group.long 0x10++0x03 line.long 0x00 "PCNS,Pin Control Non-Secure" bitfld.long 0x00 31. "NSE31,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 30. "NSE30,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 29. "NSE29,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 28. "NSE28,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 27. "NSE27,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 26. "NSE26,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 25. "NSE25,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 24. "NSE24,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 23. "NSE23,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 22. "NSE22,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 21. "NSE21,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 20. "NSE20,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 19. "NSE19,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 18. "NSE18,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 17. "NSE17,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 16. "NSE16,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 15. "NSE15,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 14. "NSE14,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 13. "NSE13,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 12. "NSE12,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 11. "NSE11,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 10. "NSE10,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 9. "NSE9,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 8. "NSE8,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 7. "NSE7,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 6. "NSE6,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 5. "NSE5,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 4. "NSE4,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The pin is configured for secure access,1: The pin is configured for non-secure access" group.long 0x14++0x03 line.long 0x00 "ICNS,Interrupt Control Non-Secure" bitfld.long 0x00 3. "NSE3,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 2. "NSE2,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." newline bitfld.long 0x00 1. "NSE1,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." bitfld.long 0x00 0. "NSE0,Non-Secure Enable" "0: The interrupt/DMA request/trigger output is..,1: The interrupt/DMA request/trigger output is.." group.long 0x18++0x03 line.long 0x00 "PCNP,Pin Control Non-Privilege" bitfld.long 0x00 31. "NPE31,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 30. "NPE30,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 29. "NPE29,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 28. "NPE28,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 27. "NPE27,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 26. "NPE26,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 25. "NPE25,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 24. "NPE24,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 23. "NPE23,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 22. "NPE22,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 21. "NPE21,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 20. "NPE20,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 19. "NPE19,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 18. "NPE18,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 17. "NPE17,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 16. "NPE16,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 15. "NPE15,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 14. "NPE14,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 13. "NPE13,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 12. "NPE12,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 11. "NPE11,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 10. "NPE10,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 9. "NPE9,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 8. "NPE8,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 7. "NPE7,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 6. "NPE6,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 5. "NPE5,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 4. "NPE4,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege.." group.long 0x1C++0x03 line.long 0x00 "ICNP,Interrupt Control Non-Privilege" bitfld.long 0x00 3. "NPE3,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 2. "NPE2,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" newline bitfld.long 0x00 1. "NPE1,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" bitfld.long 0x00 0. "NPE0,Non-Privilege Enable" "0: The pin is configured for privilege access,1: The pin is configured for non-privilege access" group.long 0x40++0x03 line.long 0x00 "PDOR,Port Data Output Register" bitfld.long 0x00 31. "PDO31,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 30. "PDO30,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 29. "PDO29,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 28. "PDO28,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 27. "PDO27,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 26. "PDO26,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 25. "PDO25,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 24. "PDO24,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 23. "PDO23,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 22. "PDO22,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 21. "PDO21,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 20. "PDO20,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 19. "PDO19,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 18. "PDO18,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 17. "PDO17,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 16. "PDO16,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 15. "PDO15,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 14. "PDO14,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 13. "PDO13,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 12. "PDO12,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 11. "PDO11,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 10. "PDO10,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 9. "PDO9,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 8. "PDO8,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 7. "PDO7,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 6. "PDO6,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 5. "PDO5,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 4. "PDO4,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 3. "PDO3,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 2. "PDO2,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." newline bitfld.long 0x00 1. "PDO1,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." bitfld.long 0x00 0. "PDO0,Port Data Output" "0: Logic level 0 is driven on pin if the pin is..,1: Logic level 1 is driven on pin if the pin is.." group.long 0x44++0x03 line.long 0x00 "PSOR,Port Set Output Register" bitfld.long 0x00 31. "PTSO31,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTSO30,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTSO29,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTSO28,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTSO27,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTSO26,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTSO25,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTSO24,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTSO23,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTSO22,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTSO21,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTSO20,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTSO19,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTSO18,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTSO17,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTSO16,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTSO15,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTSO14,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTSO13,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTSO12,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTSO11,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTSO10,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTSO9,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTSO8,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTSO7,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTSO6,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTSO5,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTSO4,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTSO3,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTSO2,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTSO1,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTSO0,Port Set Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." group.long 0x48++0x03 line.long 0x00 "PCOR,Port Clear Output Register" bitfld.long 0x00 31. "PTCO31,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 30. "PTCO30,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 29. "PTCO29,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 28. "PTCO28,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 27. "PTCO27,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 26. "PTCO26,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 25. "PTCO25,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 24. "PTCO24,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 23. "PTCO23,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 22. "PTCO22,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 21. "PTCO21,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 20. "PTCO20,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 19. "PTCO19,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 18. "PTCO18,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 17. "PTCO17,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 16. "PTCO16,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 15. "PTCO15,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 14. "PTCO14,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 13. "PTCO13,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 12. "PTCO12,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 11. "PTCO11,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 10. "PTCO10,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 9. "PTCO9,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 8. "PTCO8,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 7. "PTCO7,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 6. "PTCO6,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 5. "PTCO5,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 4. "PTCO4,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 3. "PTCO3,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 2. "PTCO2,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." newline bitfld.long 0x00 1. "PTCO1,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." bitfld.long 0x00 0. "PTCO0,Port Clear Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is cleared.." group.long 0x4C++0x03 line.long 0x00 "PTOR,Port Toggle Output Register" bitfld.long 0x00 31. "PTTO31,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 30. "PTTO30,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 29. "PTTO29,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 28. "PTTO28,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 27. "PTTO27,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 26. "PTTO26,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 25. "PTTO25,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 24. "PTTO24,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 23. "PTTO23,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 22. "PTTO22,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 21. "PTTO21,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 20. "PTTO20,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 19. "PTTO19,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 18. "PTTO18,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 17. "PTTO17,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 16. "PTTO16,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 15. "PTTO15,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 14. "PTTO14,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 13. "PTTO13,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 12. "PTTO12,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 11. "PTTO11,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 10. "PTTO10,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 9. "PTTO9,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 8. "PTTO8,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 7. "PTTO7,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 6. "PTTO6,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 5. "PTTO5,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 4. "PTTO4,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 3. "PTTO3,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 2. "PTTO2,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." newline bitfld.long 0x00 1. "PTTO1,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." bitfld.long 0x00 0. "PTTO0,Port Toggle Output" "0: Corresponding field of PDOR[PDOn] does not..,1: Corresponding field of PDOR[PDOn] is set to.." rgroup.long 0x50++0x03 line.long 0x00 "PDIR,Port Data Input Register" bitfld.long 0x00 31. "PDI31,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 30. "PDI30,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 29. "PDI29,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 28. "PDI28,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 27. "PDI27,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 26. "PDI26,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 25. "PDI25,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 24. "PDI24,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 23. "PDI23,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 22. "PDI22,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 21. "PDI21,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 20. "PDI20,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 19. "PDI19,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 18. "PDI18,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 17. "PDI17,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 16. "PDI16,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 15. "PDI15,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 14. "PDI14,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 13. "PDI13,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 12. "PDI12,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 11. "PDI11,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 10. "PDI10,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 9. "PDI9,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 8. "PDI8,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 7. "PDI7,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 6. "PDI6,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 5. "PDI5,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 4. "PDI4,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 3. "PDI3,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 2. "PDI2,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" newline bitfld.long 0x00 1. "PDI1,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" bitfld.long 0x00 0. "PDI0,Port Data Input" "0: Pin logic level is logic 0 or is not..,1: Pin logic level is logic 1" group.long 0x54++0x03 line.long 0x00 "PDDR,Port Data Direction Register" bitfld.long 0x00 31. "PDD31,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 30. "PDD30,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 29. "PDD29,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 28. "PDD28,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 27. "PDD27,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 26. "PDD26,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 25. "PDD25,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 24. "PDD24,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 23. "PDD23,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 22. "PDD22,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 21. "PDD21,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 20. "PDD20,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 19. "PDD19,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 18. "PDD18,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 17. "PDD17,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 16. "PDD16,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 15. "PDD15,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 14. "PDD14,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 13. "PDD13,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 12. "PDD12,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 11. "PDD11,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 10. "PDD10,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 9. "PDD9,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 8. "PDD8,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 7. "PDD7,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 6. "PDD6,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 5. "PDD5,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 4. "PDD4,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 3. "PDD3,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 2. "PDD2,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." newline bitfld.long 0x00 1. "PDD1,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." bitfld.long 0x00 0. "PDD0,Port Data Direction" "0: Pin is configured as general-purpose input..,1: Pin is configured as general-purpose output.." group.long 0x58++0x03 line.long 0x00 "PIDR,Port Input Disable Register" bitfld.long 0x00 31. "PID31,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 30. "PID30,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 29. "PID29,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 28. "PID28,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 27. "PID27,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 26. "PID26,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 25. "PID25,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 24. "PID24,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 23. "PID23,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 22. "PID22,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 21. "PID21,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 20. "PID20,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 19. "PID19,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 18. "PID18,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 17. "PID17,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 16. "PID16,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 15. "PID15,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 14. "PID14,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 13. "PID13,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 12. "PID12,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 11. "PID11,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 10. "PID10,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 9. "PID9,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 8. "PID8,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 7. "PID7,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 6. "PID6,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 5. "PID5,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 4. "PID4,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 3. "PID3,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 2. "PID2,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" newline bitfld.long 0x00 1. "PID1,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" bitfld.long 0x00 0. "PID0,Port Input Disable" "0: Pin is configured for General Purpose Input..,1: Pin is disabled for General Purpose Input" repeat 32. (increment 0 1) (increment 0 0x1) group.byte ($2+0x60)++0x00 line.byte 0x00 "PDR[$1],Pin Data Register a $1" bitfld.byte 0x00 0. "PD,Pin Data" "0: Pin logic level is logic zero or not..,1: Pin logic level is logic one" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0xC0)++0x03 line.long 0x00 "ICR$1,Interrupt Control Register $1" eventfld.long 0x00 24. "ISF,Interrupt Status Flag" "0: Configured interrupt is not detected,1: Configured interrupt is detected" bitfld.long 0x00 23. "LK,Lock Register" "0: Interrupt configuration by ICR[23:0] is not..,1: Interrupt configuration by ICR[23:0] is.." newline bitfld.long 0x00 20.--21. "IRQS,Interrupt Select" "0: Interrupt/DMA request/trigger output 0,1: Interrupt/DMA request/trigger output 1,2: Interrupt/DMA request/trigger output 2,3: Interrupt/DMA request/trigger output 3" bitfld.long 0x00 16.--19. "IRQC,Interrupt Configuration" "0: Interrupt Status Flag (ISF) is disabled,1: ISF flag and DMA request on rising edge,2: ISF flag and DMA request on falling edge,3: ISF flag and DMA request on either edge,?,5: ISF flag sets on rising edge,6: ISF flag sets on falling edge,7: ISF flag sets on either edge,8: ISF flag and Interrupt when logic 0,9: ISF flag and Interrupt on rising-edge,10: ISF flag and Interrupt on falling-edge,11: ISF flag and Interrupt on either edge,12: ISF flag and Interrupt when logic 1,13: Enable active high trigger output ISF flag..,14: Enable active low trigger output ISF flag on..,?..." repeat.end group.long 0x100++0x03 line.long 0x00 "GICLR,Global Interrupt Control Low Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE15,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE14,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE13,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE12,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE11,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE10,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE9,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE8,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE7,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE6,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE5,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE4,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE3,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE2,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE1,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE0,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." group.long 0x104++0x03 line.long 0x00 "GICHR,Global Interrupt Control High Register" hexmask.long.word 0x00 16.--31. 1. "GIWD,Global Interrupt Write Data" bitfld.long 0x00 15. "GIWE31,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 14. "GIWE30,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 13. "GIWE29,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 12. "GIWE28,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 11. "GIWE27,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 10. "GIWE26,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 9. "GIWE25,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 8. "GIWE24,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 7. "GIWE23,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 6. "GIWE22,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 5. "GIWE21,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 4. "GIWE20,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 3. "GIWE19,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 2. "GIWE18,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." bitfld.long 0x00 1. "GIWE17,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." newline bitfld.long 0x00 0. "GIWE16,Global Interrupt Write Enable" "0: Upper 16-bit of corresponding Interrupt..,1: Upper 16-bit of corresponding Interrupt.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x120)++0x03 line.long 0x00 "ISFR[$1],Interrupt Status Flag Register $1" eventfld.long 0x00 31. "ISF31,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 30. "ISF30,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 29. "ISF29,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 28. "ISF28,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 27. "ISF27,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 26. "ISF26,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 25. "ISF25,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 24. "ISF24,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 23. "ISF23,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 22. "ISF22,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 21. "ISF21,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 20. "ISF20,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 19. "ISF19,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 18. "ISF18,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 17. "ISF17,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 16. "ISF16,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 15. "ISF15,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 14. "ISF14,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 13. "ISF13,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 12. "ISF12,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 11. "ISF11,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 10. "ISF10,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 9. "ISF9,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 8. "ISF8,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 7. "ISF7,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 6. "ISF6,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 5. "ISF5,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 4. "ISF4,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 3. "ISF3,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 2. "ISF2,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." newline eventfld.long 0x00 1. "ISF1,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." eventfld.long 0x00 0. "ISF0,Interrupt Status Flag" "0: Configured interrupt is not detected on the..,1: Configured interrupt is detected on the pin.." repeat.end tree.end tree.end tree "I3C" repeat 3. (list 0. 1. 2.) (list ad:0x2803D000 ad:0x2808A000 ad:0x29360000) tree "I3C$1" base $2 group.long 0x00++0x03 line.long 0x00 "MCONFIG,Master Configuration Register" bitfld.long 0x00 28.--31. "I2CBAUD,I2C baud rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 25.--27. "SKEW,Skew" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24. "ODHPP,Open drain high push-pull" "0,1" hexmask.long.byte 0x00 16.--23. 1. "ODBAUD,Open drain baud rate" newline bitfld.long 0x00 12.--15. "PPLOW,Push-Pull low" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "PPBAUD,Push-pull baud rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 6. "ODSTOP,Open drain stop" "0,1" bitfld.long 0x00 4.--5. "HKEEP,High-Keeper" "0: NONE,1: WIRED_IN,2: PASSIVE_SDA,3: PASSIVE_ON_SDA_SCL" newline bitfld.long 0x00 3. "DISTO,Disable Timeout" "0,1" bitfld.long 0x00 0.--1. "MSTENA,Master enable" "0: MASTER_OFF,1: MASTER_ON,2: MASTER_CAPABLE,?..." group.long 0x04++0x03 line.long 0x00 "SCONFIG,Slave Configuration Register" hexmask.long.byte 0x00 25.--31. 1. "SADDR,Static address" hexmask.long.byte 0x00 16.--23. 1. "BAMATCH,Bus available match" newline bitfld.long 0x00 9. "OFFLINE,Offline" "0,1" bitfld.long 0x00 8. "IDRAND,ID random" "0,1" newline bitfld.long 0x00 4. "DDROK,Double Data Rate OK" "0,1" bitfld.long 0x00 3. "S0IGNORE,S0/S1 errors ignore" "0,1" newline bitfld.long 0x00 2. "MATCHSS,Match START or STOP" "0,1" bitfld.long 0x00 1. "NACK,Not acknowledge" "0,1" newline bitfld.long 0x00 0. "SLVENA,Slave enable" "0,1" group.long 0x08++0x03 line.long 0x00 "SSTATUS,Slave Status Register" rbitfld.long 0x00 30.--31. "TIMECTRL,Time control" "0: NO_TIME_CONTROL,?,2: ASYNC_MODE,?..." rbitfld.long 0x00 28.--29. "ACTSTATE,Activity state from Common Command Codes (CCC)" "0: NO_LATENCY,1: LATENCY_1MS,2: LATENCY_100MS,3: LATENCY_10S" newline rbitfld.long 0x00 27. "HJDIS,Hot-Join is disabled" "0,1" rbitfld.long 0x00 25. "MRDIS,Master requests are disabled" "0,1" newline rbitfld.long 0x00 24. "IBIDIS,In-Band Interrupts are disabled" "0,1" rbitfld.long 0x00 20.--21. "EVDET,Event details" "0: NONE,1: NO_REQUEST,2: NACKED,3: ACKED" newline bitfld.long 0x00 18. "EVENT,Event" "0,1" bitfld.long 0x00 17. "CHANDLED,Common-Command-Code handled" "0,1" newline bitfld.long 0x00 16. "HDRMATCH,High Data Rate command match" "0,1" rbitfld.long 0x00 15. "ERRWARN,Error warning" "0,1" newline bitfld.long 0x00 14. "CCC,Common Command Code" "0,1" bitfld.long 0x00 13. "DACHG,DACHG" "0,1" newline rbitfld.long 0x00 12. "TXNOTFULL,Transmit buffer is not full" "0,1" rbitfld.long 0x00 11. "RX_PEND,Received message pending" "0,1" newline bitfld.long 0x00 10. "STOP,Stop" "0,1" bitfld.long 0x00 9. "MATCHED,Matched" "0,1" newline bitfld.long 0x00 8. "START,Start" "0,1" rbitfld.long 0x00 6. "STHDR,Status High Data Rate" "0,1" newline rbitfld.long 0x00 5. "STDAA,Status Dynamic Address Assignment" "0,1" rbitfld.long 0x00 4. "STREQWR,Status request" "0,1" newline rbitfld.long 0x00 3. "STREQRD,Status required" "0,1" rbitfld.long 0x00 2. "STCCCH,Status Common Command Code Handler" "0,1" newline rbitfld.long 0x00 1. "STMSG,Status message" "0,1" rbitfld.long 0x00 0. "STNOTSTOP,Status not stop" "0,1" group.long 0x0C++0x03 line.long 0x00 "SCTRL,Slave Control Register" hexmask.long.byte 0x00 24.--31. 1. "VENDINFO,Vendor information" bitfld.long 0x00 20.--21. "ACTSTATE,Activity state (of slave)" "0,1,2,3" newline bitfld.long 0x00 16.--19. "PENDINT,Pending interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. "IBIDATA,In-Band Interrupt data" newline bitfld.long 0x00 0.--1. "EVENT,EVENT" "0: NORMAL_MODE,1: IBI,2: MASTER_REQUEST,3: HOT_JOIN_REQUEST" group.long 0x10++0x03 line.long 0x00 "SINTSET,Slave Interrupt Set Register" bitfld.long 0x00 18. "EVENT,Event interrupt enable" "0,1" bitfld.long 0x00 17. "CHANDLED,Common Command Code (CCC) (that was handled by I3C module) interrupt enable" "0,1" newline bitfld.long 0x00 16. "DDRMATCHED,Double Data Rate (DDR) interrupt enable" "0,1" bitfld.long 0x00 15. "ERRWARN,Error/warning interrupt enable" "0,1" newline bitfld.long 0x00 14. "CCC,Common Command Code (CCC) (that was not handled by I3C module) interrupt enable" "0,1" bitfld.long 0x00 13. "DACHG,Dynamic address change interrupt enable" "0,1" newline bitfld.long 0x00 12. "TXSEND,Transmit interrupt enable" "0,1" bitfld.long 0x00 11. "RXPEND,Receive interrupt enable" "0,1" newline bitfld.long 0x00 10. "STOP,Stop interrupt enable" "0,1" bitfld.long 0x00 9. "MATCHED,Match interrupt enable" "0,1" newline bitfld.long 0x00 8. "START,Start interrupt enable" "0,1" group.long 0x14++0x03 line.long 0x00 "SINTCLR,Slave Interrupt Clear Register" eventfld.long 0x00 18. "EVENT,EVENT interrupt enable clear" "0,1" eventfld.long 0x00 17. "CHANDLED,CHANDLED interrupt enable clear" "0,1" newline eventfld.long 0x00 16. "DDRMATCHED,DDRMATCHED interrupt enable clear" "0,1" eventfld.long 0x00 15. "ERRWARN,ERRWARN interrupt enable clear" "0,1" newline eventfld.long 0x00 14. "CCC,CCC interrupt enable clear" "0,1" eventfld.long 0x00 13. "DACHG,DACHG interrupt enable clear" "0,1" newline eventfld.long 0x00 12. "TXSEND,TXSEND interrupt enable clear" "0,1" eventfld.long 0x00 11. "RXPEND,RXPEND interrupt enable clear" "0,1" newline eventfld.long 0x00 10. "STOP,STOP interrupt enable clear" "0,1" eventfld.long 0x00 9. "MATCHED,MATCHED interrupt enable clear" "0,1" newline eventfld.long 0x00 8. "START,START interrupt enable clear" "0,1" rgroup.long 0x18++0x03 line.long 0x00 "SINTMASKED,Slave Interrupt Mask Register" bitfld.long 0x00 18. "EVENT,EVENT interrupt mask" "0,1" bitfld.long 0x00 17. "CHANDLED,CHANDLED interrupt mask" "0,1" newline bitfld.long 0x00 16. "DDRMATCHED,DDRMATCHED interrupt mask" "0,1" bitfld.long 0x00 15. "ERRWARN,ERRWARN interrupt mask" "0,1" newline bitfld.long 0x00 14. "CCC,CCC interrupt mask" "0,1" bitfld.long 0x00 13. "DACHG,DACHG interrupt mask" "0,1" newline bitfld.long 0x00 12. "TXSEND,TXSEND interrupt mask" "0,1" bitfld.long 0x00 11. "RXPEND,RXPEND interrupt mask" "0,1" newline bitfld.long 0x00 10. "STOP,STOP interrupt mask" "0,1" bitfld.long 0x00 9. "MATCHED,MATCHED interrupt mask" "0,1" newline bitfld.long 0x00 8. "START,START interrupt mask" "0,1" group.long 0x1C++0x03 line.long 0x00 "SERRWARN,Slave Errors and Warnings Register" bitfld.long 0x00 17. "OWRITE,Over-write error" "0,1" bitfld.long 0x00 16. "OREAD,Over-read error" "0,1" newline bitfld.long 0x00 11. "S0S1,S0 or S1 error" "0,1" bitfld.long 0x00 10. "HCRC,HDR-DDR CRC error" "0,1" newline bitfld.long 0x00 9. "HPAR,HDR parity error" "0,1" bitfld.long 0x00 8. "SPAR,SDR parity error" "0,1" newline bitfld.long 0x00 4. "INVSTART,Invalid start error" "0,1" bitfld.long 0x00 3. "TERM,Terminated error" "0,1" newline bitfld.long 0x00 2. "URUNNACK,Underrun and Not Acknowledged (NACKed) error" "0,1" bitfld.long 0x00 1. "URUN,Underrun error" "0,1" newline bitfld.long 0x00 0. "ORUN,Overrun error" "0,1" group.long 0x20++0x03 line.long 0x00 "SDMACTRL,Slave DMA Control Register" bitfld.long 0x00 4.--5. "DMAWIDTH,Width of DMA operations" "0: BYTE,1: BYTE_AGAIN,2: HALF_WORD,?..." bitfld.long 0x00 2.--3. "DMATB,DMA Write (To-bus) trigger" "0: NOT_USED,1: ENABLE_ONE_FRAME,2: ENABLE,?..." newline bitfld.long 0x00 0.--1. "DMAFB,DMA Read (From-bus) trigger" "0: DMA not used,1: DMA is enabled for 1 frame,2: DMA enable,?..." group.long 0x2C++0x03 line.long 0x00 "SDATACTRL,Slave Data Control Register" rbitfld.long 0x00 31. "RXEMPTY,RX is empty" "0: RX is not empty,1: RX is empty" rbitfld.long 0x00 30. "TXFULL,TX is full" "0: TX is not full,1: TX is full" newline rbitfld.long 0x00 24.--28. "RXCOUNT,Count of bytes in RX" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rbitfld.long 0x00 16.--20. "TXCOUNT,Count of bytes in TX" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 6.--7. "RXTRIG,Trigger level for RX FIFO fullness" "0: Trigger on not empty,1: Trigger on or more full,2: Trigger on .5 or more full,3: Trigger on 3/4 or more full" bitfld.long 0x00 4.--5. "TXTRIG,Trigger level for TX FIFO emptiness" "0: Trigger on empty,1: Trigger on full or less,2: Trigger on .5 full or less,3: Trigger on 1 less than full or less (Default)" newline bitfld.long 0x00 3. "UNLOCK,Unlock" "0,1" bitfld.long 0x00 1. "FLUSHFB,Flushes the from-bus buffer/FIFO" "0,1" newline bitfld.long 0x00 0. "FLUSHTB,Flush the to-bus buffer/FIFO" "0,1" wgroup.long 0x30++0x03 line.long 0x00 "SWDATAB,Slave Write Data Byte Register" bitfld.long 0x00 16. "END_ALSO,End also" "0,1" bitfld.long 0x00 8. "END,End" "0,1" newline hexmask.long.byte 0x00 0.--7. 1. "DATA,The data byte to send to the master" wgroup.long 0x34++0x03 line.long 0x00 "SWDATABE,Slave Write Data Byte End" hexmask.long.byte 0x00 0.--7. 1. "DATA,The data byte to send to the master" wgroup.long 0x38++0x03 line.long 0x00 "SWDATAH,Slave Write Data Half-word Register" bitfld.long 0x00 16. "END,End of message" "0,1" hexmask.long.byte 0x00 8.--15. 1. "DATA1,The 2nd byte to send to the master" newline hexmask.long.byte 0x00 0.--7. 1. "DATA0,The 1st byte to send to the master" wgroup.long 0x3C++0x03 line.long 0x00 "SWDATAHE,Slave Write Data Half-word End Register" hexmask.long.byte 0x00 8.--15. 1. "DATA1,The 2nd byte to send to the master" hexmask.long.byte 0x00 0.--7. 1. "DATA0,The 1st byte to send to the master" rgroup.long 0x40++0x03 line.long 0x00 "SRDATAB,Slave Read Data Byte Register" hexmask.long.byte 0x00 0.--7. 1. "DATA0,Byte read from the master" rgroup.long 0x48++0x03 line.long 0x00 "SRDATAH,Slave Read Data Half-word Register" hexmask.long.byte 0x00 8.--15. 1. "MSB,The 2nd byte read from the slave" hexmask.long.byte 0x00 0.--7. 1. "LSB,The 1st byte read from the slave" rgroup.long 0x60++0x03 line.long 0x00 "SCAPABILITIES,Slave Capabilities Register" bitfld.long 0x00 31. "DMA,DMA" "0: DMA is not supported,1: DMA is supported" bitfld.long 0x00 30. "INT,Interrupt" "0: Interrupts are not supported,1: Interrupts are supported" newline bitfld.long 0x00 28.--29. "FIFORX,FIFO receive" "0: FIFO_2BYTE,1: FIFO_4BYTE,2: FIFO_8BYTE,3: FIFO_16BYTE" bitfld.long 0x00 26.--27. "FIFOTX,FIFO transmit" "0: FIFO_2BYTE,1: FIFO_4BYTE,2: FIFO_8BYTE,3: FIFO_16BYTE" newline bitfld.long 0x00 23.--25. "EXTFIFO,External FIFO" "?,1: STD_EXT_FIFO,?..." bitfld.long 0x00 21. "TIMECTRL,Time control" "0: NO_TIME_CONTROL_TYPE,1: ATLEAST1_TIME_CONTROL" newline bitfld.long 0x00 16.--20. "IBI_MR_HJ,In-Band Interrupts Master Requests Hot Join events" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 12.--15. "CCCHANDLE,Common Command Codes (CCC) handling" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 10.--11. "SADDR,Static address" "0: NO_STATIC,1: STATIC,2: HW_CONTROL,3: CONFIG" bitfld.long 0x00 9. "MASTER,Master" "0: MASTERNOTSUPPORTED,1: MASTERSUPPORTED" newline bitfld.long 0x00 6.--8. "HDRSUPP,HDR support" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2.--5. "IDREG,ID register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--1. "IDENA,ID 48b handler" "0: APPLICATION,1: HW,2: HW_BUT,3: PARTNO" group.long 0x64++0x03 line.long 0x00 "SDYNADDR,Slave Dynamic Address Register" hexmask.long.word 0x00 16.--31. 1. "KEY,Key" bitfld.long 0x00 12. "MAPSA,Map a Static Address" "0,1" newline bitfld.long 0x00 8.--11. "MAPIDX,Mapped Dynamic Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 1.--7. 1. "DADDR,Dynamic address" newline bitfld.long 0x00 0. "DAVALID,DAVALID" "0: DANOTASSIGNED,1: DAASSIGNED" group.long 0x68++0x03 line.long 0x00 "SMAXLIMITS,Slave Maximum Limits Register" hexmask.long.word 0x00 16.--27. 1. "MAXWR,Maximum write length" hexmask.long.word 0x00 0.--11. 1. "MAXRD,Maximum read length" group.long 0x6C++0x03 line.long 0x00 "SIDPARTNO,Slave ID Part Number Register" hexmask.long 0x00 0.--31. 1. "PARTNO,Part number" group.long 0x70++0x03 line.long 0x00 "SIDEXT,Slave ID Extension Register" hexmask.long.byte 0x00 16.--23. 1. "BCR,Bus Characteristics Register" hexmask.long.byte 0x00 8.--15. 1. "DCR,Device Characteristic Register" group.long 0x74++0x03 line.long 0x00 "SVENDORID,Slave Vendor ID Register" hexmask.long.word 0x00 0.--14. 1. "VID,Vendor ID" group.long 0x78++0x03 line.long 0x00 "STCCLOCK,Slave Time Control Clock Register" hexmask.long.byte 0x00 8.--15. 1. "FREQ,Clock frequency" hexmask.long.byte 0x00 0.--7. 1. "ACCURACY,Clock accuracy" rgroup.long 0x7C++0x03 line.long 0x00 "SMSGMAPADDR,Slave Message-Mapped Address Register" bitfld.long 0x00 16.--19. "MAPLASTM2,Previous match index 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "MAPLASTM1,Previous match index 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "MAPLAST,Matched address index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x84++0x03 line.long 0x00 "MCTRL,Master Main Control Register" hexmask.long.byte 0x00 16.--23. 1. "RDTERM,Read terminate" hexmask.long.byte 0x00 9.--15. 1. "ADDR,ADDR" newline bitfld.long 0x00 8. "DIR,DIR" "0: DIR,1: DIRREAD" bitfld.long 0x00 6.--7. "IBIRESP,In-Band Interrupt (IBI) response" "0: ACK,1: NACK,2: ACK_WITH_MANDATORY,3: MANUAL" newline bitfld.long 0x00 4.--5. "TYPE,Bus type with START" "0: I3C,1: I2C,2: DDR,3: For ForcedExit this is forced IBHR" bitfld.long 0x00 0.--2. "REQUEST,Request" "0: NONE,1: EMITSTARTADDR,2: EMITSTOP,3: IBIACKNACK,4: PROCESSDAA,?,6: FORCEEXIT and IBHR,7: AUTOIBI" group.long 0x88++0x03 line.long 0x00 "MSTATUS,Master Status Register" hexmask.long.byte 0x00 24.--30. 1. "IBIADDR,IBI address" bitfld.long 0x00 19. "NOWMASTER,Now master (now this module is a master)" "0,1" newline rbitfld.long 0x00 15. "ERRWARN,Error or warning" "0,1" bitfld.long 0x00 13. "IBIWON,In-Band Interrupt (IBI) won" "0,1" newline rbitfld.long 0x00 12. "TXNOTFULL,TX buffer/FIFO not yet full" "0,1" rbitfld.long 0x00 11. "RXPEND,RXPEND" "0,1" newline bitfld.long 0x00 10. "COMPLETE,COMPLETE" "0,1" bitfld.long 0x00 9. "MCTRLDONE,Master control done" "0,1" newline bitfld.long 0x00 8. "SLVSTART,Slave start" "0,1" rbitfld.long 0x00 6.--7. "IBITYPE,In-Band Interrupt (IBI) type" "0: NONE,1: IBI,2: MR,3: HJ" newline rbitfld.long 0x00 5. "NACKED,Not acknowledged" "0,1" rbitfld.long 0x00 4. "BETWEEN,Between" "0: INACTIVE,1: ACTIVE" newline rbitfld.long 0x00 0.--2. "STATE,State of the master" "0: IDLE,1: SLVREQ,2: MSGSDR,3: NORMACT,4: MSGDDR,5: DAA,6: IBIACK,7: IBIRCV" group.long 0x8C++0x03 line.long 0x00 "MIBIRULES,Master In-band Interrupt Registry and Rules Register" bitfld.long 0x00 31. "NOBYTE,No IBI byte" "0,1" bitfld.long 0x00 30. "MSB0,Set Most Significant address Bit to 0" "0,1" newline bitfld.long 0x00 24.--29. "ADDR4,ADDR4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. "ADDR3,ADDR3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 12.--17. "ADDR2,ADDR2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. "ADDR1,ADDR1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. "ADDR0,ADDR0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x03 line.long 0x00 "MINTSET,Master Interrupt Set Register" bitfld.long 0x00 19. "NOWMASTER,Now master (now this I3C module is a master) interrupt enable" "0,1" bitfld.long 0x00 15. "ERRWARN,Error or warning (ERRWARN) interrupt enable" "0,1" newline bitfld.long 0x00 13. "IBIWON,In-Band Interrupt (IBI) won interrupt enable" "0,1" bitfld.long 0x00 12. "TXNOTFULL,TX buffer/FIFO is not full interrupt enable" "0,1" newline bitfld.long 0x00 11. "RXPEND,RX pending interrupt enable" "0,1" bitfld.long 0x00 10. "COMPLETE,Completed message interrupt enable" "0,1" newline bitfld.long 0x00 9. "MCTRLDONE,Master control done interrupt enable" "0,1" bitfld.long 0x00 8. "SLVSTART,Slave start interrupt enable" "0,1" wgroup.long 0x94++0x03 line.long 0x00 "MINTCLR,Master Interrupt Clear Register" bitfld.long 0x00 19. "NOWMASTER,NOWMASTER interrupt enable clear" "0,1" bitfld.long 0x00 15. "ERRWARN,ERRWARN interrupt enable clear" "0,1" newline bitfld.long 0x00 13. "IBIWON,IBIWON interrupt enable clear" "0,1" bitfld.long 0x00 12. "TXNOTFULL,TXNOTFULL interrupt enable clear" "0,1" newline bitfld.long 0x00 11. "RXPEND,RXPEND interrupt enable clear" "0,1" bitfld.long 0x00 10. "COMPLETE,COMPLETE interrupt enable clear" "0,1" newline bitfld.long 0x00 9. "MCTRLDONE,MCTRLDONE interrupt enable clear" "0,1" bitfld.long 0x00 8. "SLVSTART,SLVSTART interrupt enable clear" "0,1" rgroup.long 0x98++0x03 line.long 0x00 "MINTMASKED,Master Interrupt Mask Register" bitfld.long 0x00 19. "NOWMASTER,NOWMASTER interrupt mask" "0,1" bitfld.long 0x00 15. "ERRWARN,ERRWARN interrupt mask" "0,1" newline bitfld.long 0x00 13. "IBIWON,IBIWON interrupt mask" "0,1" bitfld.long 0x00 12. "TXNOTFULL,TXNOTFULL interrupt mask" "0,1" newline bitfld.long 0x00 11. "RXPEND,RXPEND interrupt mask" "0,1" bitfld.long 0x00 10. "COMPLETE,COMPLETE interrupt mask" "0,1" newline bitfld.long 0x00 9. "MCTRLDONE,MCTRLDONE interrupt mask" "0,1" bitfld.long 0x00 8. "SLVSTART,SLVSTART interrupt mask" "0,1" group.long 0x9C++0x03 line.long 0x00 "MERRWARN,Master Errors and Warnings Register" bitfld.long 0x00 20. "TIMEOUT,TIMEOUT error" "0,1" bitfld.long 0x00 19. "INVREQ,Invalid request error" "0,1" newline bitfld.long 0x00 18. "MSGERR,Message error" "0,1" bitfld.long 0x00 17. "OWRITE,Over-write error" "0,1" newline bitfld.long 0x00 16. "OREAD,Over-read error" "0,1" bitfld.long 0x00 10. "HCRC,High data rate CRC error" "0,1" newline bitfld.long 0x00 9. "HPAR,High data rate parity" "0,1" bitfld.long 0x00 4. "TERM,Terminate error" "0,1" newline bitfld.long 0x00 3. "WRABT,WRABT (Write abort) error" "0,1" bitfld.long 0x00 2. "NACK,Not acknowledge (NACK) error" "0,1" group.long 0xA0++0x03 line.long 0x00 "MDMACTRL,Master DMA Control Register" bitfld.long 0x00 4.--5. "DMAWIDTH,DMA width" "0: BYTE,1: BYTE_AGAIN,2: HALF_WORD,?..." bitfld.long 0x00 2.--3. "DMATB,DMA to bus" "0: NOT_USED,1: ENABLE_ONE_FRAME,2: ENABLE,?..." newline bitfld.long 0x00 0.--1. "DMAFB,DMA from bus" "0: NOT_USED,1: ENABLE_ONE_FRAME,2: ENABLE,?..." group.long 0xAC++0x03 line.long 0x00 "MDATACTRL,Master Data Control Register" rbitfld.long 0x00 31. "RXEMPTY,RX is empty" "0,1" rbitfld.long 0x00 30. "TXFULL,TX is full" "0,1" newline rbitfld.long 0x00 24.--28. "RXCOUNT,RX byte count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rbitfld.long 0x00 16.--20. "TXCOUNT,TX byte count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 6.--7. "RXTRIG,RX trigger level" "0,1,2,3" bitfld.long 0x00 4.--5. "TXTRIG,TX trigger level" "0,1,2,3" newline bitfld.long 0x00 2. "UNLOCK,Unlock" "0,1" bitfld.long 0x00 1. "FLUSHFB,Flush from-bus buffer/FIFO" "0,1" newline bitfld.long 0x00 0. "FLUSHTB,Flush to-bus buffer/FIFO" "0,1" wgroup.long 0xB0++0x03 line.long 0x00 "MWDATAB,Master Write Data Byte Register" bitfld.long 0x00 16. "END_ALSO,End of message also" "0,1" bitfld.long 0x00 8. "END,End of message" "0,1" newline hexmask.long.byte 0x00 0.--7. 1. "VALUE,Data byte" wgroup.long 0xB4++0x03 line.long 0x00 "MWDATABE,Master Write Data Byte End Register" hexmask.long.byte 0x00 0.--7. 1. "VALUE,Data" wgroup.long 0xB8++0x03 line.long 0x00 "MWDATAH,Master Write Data Half-word Register" bitfld.long 0x00 16. "END,End of message" "0,1" hexmask.long.byte 0x00 8.--15. 1. "DATA1,Data byte 1" newline hexmask.long.byte 0x00 0.--7. 1. "DATA0,Data byte 0" wgroup.long 0xBC++0x03 line.long 0x00 "MWDATAHE,Master Write Data Byte End Register" hexmask.long.byte 0x00 8.--15. 1. "DATA1,DATA 1" hexmask.long.byte 0x00 0.--7. 1. "DATA0,DATA 0" rgroup.long 0xC0++0x03 line.long 0x00 "MRDATAB,Master Read Data Byte Register" hexmask.long.byte 0x00 0.--7. 1. "VALUE,VALUE" rgroup.long 0xC8++0x03 line.long 0x00 "MRDATAH,Master Read Data Half-word Register" hexmask.long.byte 0x00 8.--15. 1. "MSB,MSB" hexmask.long.byte 0x00 0.--7. 1. "LSB,LSB" wgroup.long 0xD0++0x03 line.long 0x00 "MWMSG_SDR_CONTROL,Master Write Message in SDR mode" bitfld.long 0x00 11.--15. "LEN,Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10. "I2C,I2C" "0: I3C message,1: I2C message" newline bitfld.long 0x00 8. "END,End of SDR message" "0,1" hexmask.long.byte 0x00 1.--7. 1. "ADDR,Address to be written to" newline bitfld.long 0x00 0. "DIR,Direction" "0: ,1: " wgroup.long 0xD0++0x03 line.long 0x00 "MWMSG_SDR_DATA,Master Write Message Data in SDR mode" bitfld.long 0x00 16. "END,End of message" "0,1" hexmask.long.word 0x00 0.--15. 1. "DATA16B,Data" rgroup.long 0xD4++0x03 line.long 0x00 "MRMSG_SDR,Master Read Message in SDR mode" hexmask.long.word 0x00 0.--15. 1. "DATA,Data" wgroup.long 0xD8++0x03 line.long 0x00 "MWMSG_DDR_CONTROL,Master Write Message in DDR mode" bitfld.long 0x00 14. "END,End of message" "0,1" hexmask.long.word 0x00 0.--9. 1. "LEN,Length of message" wgroup.long 0xD8++0x03 line.long 0x00 "MWMSG_DDR_DATA,Master Write Message Data in DDR mode" bitfld.long 0x00 16. "END,End of message" "0,1" hexmask.long.word 0x00 0.--15. 1. "DATA16B,Data" group.long 0xDC++0x03 line.long 0x00 "MRMSG_DDR,Master Read Message in DDR mode" hexmask.long.word 0x00 16.--25. 1. "CLEN,Current length" hexmask.long.word 0x00 0.--15. 1. "DATA,Data" group.long 0xE4++0x03 line.long 0x00 "MDYNADDR,Master Dynamic Address Register" hexmask.long.byte 0x00 1.--7. 1. "DADDR,Dynamic address" bitfld.long 0x00 0. "DAVALID,Dynamic address valid" "0,1" rgroup.long 0xFFC++0x03 line.long 0x00 "SID,Slave Module ID Register" hexmask.long 0x00 0.--31. 1. "ID,ID" tree.end repeat.end tree.end tree "IOMUX (IOMUXC rtd)" tree "IOMUXC0" base ad:0x280A1000 repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x00)++0x03 line.long 0x00 "__14PCR0_PTA$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 9. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x40)++0x03 line.long 0x00 "__14PCR0_PTA$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "__13PCR0_PTB$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x100)++0x03 line.long 0x00 "__12PCR0_PTC$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 8. (strings "16" "17" "18" "19" "20" "21" "22" "23" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C ) group.long ($2+0x140)++0x03 line.long 0x00 "__12PCR0_PTC$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x400)++0x03 line.long 0x00 "__11PCR0_BOOT_MODE$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end group.long 0x800++0x03 line.long 0x00 "__10PSMI0_PMIC0_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x804++0x03 line.long 0x00 "__10PSMI0_PMIC0_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x808++0x03 line.long 0x00 "__10PSMI0_EWM0_IN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x80C)++0x03 line.long 0x00 "__10PSMI0_EXT_AUD_MCLK$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x898++0x03 line.long 0x00 "__9PSMI0_I3C0_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x89C++0x03 line.long 0x00 "__9PSMI0_I3C0_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8A0++0x03 line.long 0x00 "__9PSMI0_LPSPI0_PCS0,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8B0++0x03 line.long 0x00 "__8PSMI0_LPSPI0_SCK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8B4++0x03 line.long 0x00 "__8PSMI0_LPSPI0_SIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8B8++0x03 line.long 0x00 "__8PSMI0_LPSPI0_SOUT,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8BC++0x03 line.long 0x00 "__8PSMI0_LPSPI1_PCS0,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8CC++0x03 line.long 0x00 "__7PSMI0_LPSPI1_SCK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8D0++0x03 line.long 0x00 "__7PSMI0_LPSPI1_SIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8D4++0x03 line.long 0x00 "__7PSMI0_LPSPI1_SOUT,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8FC++0x03 line.long 0x00 "PSMI0_FLEXSPI1_A_SCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 3. (strings "1" "2" "3" )(list 0x00 0x04 0x08 ) group.long ($2+0x928)++0x03 line.long 0x00 "__6PSMI0_LPTMR0_ALT$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end repeat 3. (strings "1" "2" "3" )(list 0x00 0x04 0x08 ) group.long ($2+0x934)++0x03 line.long 0x00 "__6PSMI0_LPTMR1_ALT$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x940)++0x03 line.long 0x00 "__6PSMI0_TPM0_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x958++0x03 line.long 0x00 "__5PSMI0_TPM0_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x95C)++0x03 line.long 0x00 "__5PSMI0_TPM1_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x974++0x03 line.long 0x00 "__4PSMI0_TPM1_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x978++0x03 line.long 0x00 "__4PSMI0_LPI2C0_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x97C++0x03 line.long 0x00 "__4PSMI0_LPI2C0_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x980++0x03 line.long 0x00 "__4PSMI0_LPI2C0_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x984++0x03 line.long 0x00 "__4PSMI0_LPI2C1_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x988++0x03 line.long 0x00 "__4PSMI0_LPI2C1_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x98C++0x03 line.long 0x00 "__4PSMI0_LPI2C1_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x990++0x03 line.long 0x00 "__4PSMI0_LPUART0_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x994++0x03 line.long 0x00 "__4PSMI0_LPUART0_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x998++0x03 line.long 0x00 "__4PSMI0_LPUART0_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x99C++0x03 line.long 0x00 "__4PSMI0_LPUART1_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9A0++0x03 line.long 0x00 "__4PSMI0_LPUART1_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9A4++0x03 line.long 0x00 "__4PSMI0_LPUART1_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x9A8)++0x03 line.long 0x00 "__4PSMI0_I2S0_RXD$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x9B8++0x03 line.long 0x00 "__3PSMI0_I2S0_RX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9BC++0x03 line.long 0x00 "__3PSMI0_I2S0_RX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9C0++0x03 line.long 0x00 "__3PSMI0_I2S0_TX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9C4++0x03 line.long 0x00 "__3PSMI0_I2S0_TX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x9C8)++0x03 line.long 0x00 "__3PSMI0_I2S1_RXD$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x9D8++0x03 line.long 0x00 "__3PSMI0_I2S1_RX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9DC++0x03 line.long 0x00 "__3PSMI0_I2S1_RX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9E0++0x03 line.long 0x00 "__3PSMI0_I2S1_TX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9E4++0x03 line.long 0x00 "__3PSMI0_I2S1_TX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9E8++0x03 line.long 0x00 "__3PSMI0_CAN0_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x9EC)++0x03 line.long 0x00 "__3PSMI0_TPM2_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xA04++0x03 line.long 0x00 "__2PSMI0_TPM2_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0xA08)++0x03 line.long 0x00 "__2PSMI0_TPM3_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xA20++0x03 line.long 0x00 "__2PSMI0_TPM3_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA24++0x03 line.long 0x00 "__2PSMI0_LPI2C2_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA28++0x03 line.long 0x00 "__2PSMI0_LPI2C2_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA2C++0x03 line.long 0x00 "__2PSMI0_LPI2C2_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA34++0x03 line.long 0x00 "__1PSMI0_LPI2C3_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA38++0x03 line.long 0x00 "__1PSMI0_LPI2C3_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA3C++0x03 line.long 0x00 "__1PSMI0_I3C1_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA40++0x03 line.long 0x00 "__1PSMI0_I3C1_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA44++0x03 line.long 0x00 "__1PSMI0_LPUART2_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA48++0x03 line.long 0x00 "__1PSMI0_LPUART2_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA4C++0x03 line.long 0x00 "__1PSMI0_LPUART2_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA50++0x03 line.long 0x00 "__1PSMI0_LPUART3_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA54++0x03 line.long 0x00 "__1PSMI0_LPUART3_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA58++0x03 line.long 0x00 "__1PSMI0_LPUART3_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xA5C)++0x03 line.long 0x00 "__1PSMI0_LPSPI2_PCS$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xA6C++0x03 line.long 0x00 "__1PSMI0_LPSPI2_SCK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA70++0x03 line.long 0x00 "__1PSMI0_LPSPI2_SIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA74++0x03 line.long 0x00 "__1PSMI0_LPSPI2_SOUT,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xA78)++0x03 line.long 0x00 "__1PSMI0_LPSPI3_PCS$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xA88++0x03 line.long 0x00 "__1PSMI0_LPSPI3_SCK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA8C++0x03 line.long 0x00 "__1PSMI0_LPSPI3_SIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA90++0x03 line.long 0x00 "__1PSMI0_LPSPI3_SOUT,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "01" "23" "45" "67" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xAD4)++0x03 line.long 0x00 "__0PSMI0_MICFIL0_DATA$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xAE4++0x03 line.long 0x00 "__0PSMI0_SEC0_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAE8++0x03 line.long 0x00 "__0PSMI0_SEC0_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." tree.end tree "IOMUXC1" base ad:0x298C0000 repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x00)++0x03 line.long 0x00 "__7PCR1_PTD$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 8. (strings "16" "17" "18" "19" "20" "21" "22" "23" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C ) group.long ($2+0x40)++0x03 line.long 0x00 "__7PCR1_PTD$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x80)++0x03 line.long 0x00 "__6PCR1_PTE$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 8. (strings "16" "17" "18" "19" "20" "21" "22" "23" )(list 0x0 0x4 0x8 0xC 0x10 0x14 0x18 0x1C ) group.long ($2+0xC0)++0x03 line.long 0x00 "__6PCR1_PTE$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x100)++0x03 line.long 0x00 "__5PCR1_PTF$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end repeat 16. (strings "16" "17" "18" "19" "20" "21" "22" "23" "24" "25" "26" "27" "28" "29" "30" "31" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x140)++0x03 line.long 0x00 "__5PCR1_PTF$1,Pad Control Register" bitfld.long 0x00 22.--26. "DFD,Digital Filter Duration" "0: Digital filter is disabled,1: Filter window count value,?..." bitfld.long 0x00 21. "DFCS,Digital Filter Clock Select" "0: Digital filter is running out of PCTL* Bus..,1: Digital filter is running out RTC 1kHz clock" newline bitfld.long 0x00 20. "DFE,Digital Filter Enable" "0: Digital filter disabled,1: Digital filter enabled" bitfld.long 0x00 17. "OBE,Output Buffer Enable" "0: Output Buffer enable depends on selected..,1: Output buffer forced enabled" newline bitfld.long 0x00 16. "IBE,Input Buffer Enable" "0: Input Buffer enable depends on selected..,1: Input buffer forced enabled" bitfld.long 0x00 15. "LK,Lock" "0: Register Unlocked,1: Register Locked for write" newline bitfld.long 0x00 8.--11. "MUX,PAD Mux Selector" "0: Alternate function 0 Analog / Hiz,1: Refer to IO Signal Table for availabre..,?..." bitfld.long 0x00 6. "DSE,Drive Strength Enable" "0: Standard Drive Strength,1: Hi Drive Strength" newline bitfld.long 0x00 5. "ODE,Open-drain Enable" "0: Push-pull Output,1: Open-drain Output" bitfld.long 0x00 2. "SRE,Slew Rate Enable" "0: Standard Slew Rate,1: Slow Slew Rate" newline bitfld.long 0x00 1. "PE,Pull-up Enable" "0: pull disabled,1: pull enabled" bitfld.long 0x00 0. "PS,Pull Select" "0: Pull-down selected,1: Pull-up selected" repeat.end group.long 0x800++0x03 line.long 0x00 "__4PSMI1_EXT_AUD_MCLK2,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x804)++0x03 line.long 0x00 "__4PSMI1_TPM4_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x81C++0x03 line.long 0x00 "__4PSMI1_TPM4_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x820)++0x03 line.long 0x00 "__4PSMI1_TPM5_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x838++0x03 line.long 0x00 "__3PSMI1_TPM5_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 16. (strings "0" "1" "10" "11" "12" "13" "14" "15" "16" "17" "18" "19" "2" "20" "21" "22" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x83C)++0x03 line.long 0x00 "__3PSMI1_FXIO1_D$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end repeat 16. (strings "23" "24" "25" "26" "27" "28" "29" "3" "30" "31" "4" "5" "6" "7" "8" "9" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 0x24 0x28 0x2C 0x30 0x34 0x38 0x3C ) group.long ($2+0x87C)++0x03 line.long 0x00 "__3PSMI1_FXIO1_D$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x8BC++0x03 line.long 0x00 "__3PSMI1_I3C2_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8C0++0x03 line.long 0x00 "__3PSMI1_I3C2_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8C4++0x03 line.long 0x00 "__3PSMI1_LPI2C4_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8C8++0x03 line.long 0x00 "__3PSMI1_LPI2C4_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8CC++0x03 line.long 0x00 "__3PSMI1_LPI2C4_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8D0++0x03 line.long 0x00 "__3PSMI1_LPI2C5_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8D4++0x03 line.long 0x00 "__3PSMI1_LPI2C5_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8D8++0x03 line.long 0x00 "__3PSMI1_LPI2C5_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8DC++0x03 line.long 0x00 "__3PSMI1_LPUART4_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8E0++0x03 line.long 0x00 "__3PSMI1_LPUART4_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8E4++0x03 line.long 0x00 "__3PSMI1_LPUART4_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8E8++0x03 line.long 0x00 "__3PSMI1_LPUART5_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8EC++0x03 line.long 0x00 "__3PSMI1_LPUART5_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x8F0++0x03 line.long 0x00 "__3PSMI1_LPUART5_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x8F4)++0x03 line.long 0x00 "__3PSMI1_LPSPI4_PCS$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x904++0x03 line.long 0x00 "__3PSMI1_LPSPI4_SCK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x908++0x03 line.long 0x00 "__3PSMI1_LPSPI4_SIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x90C++0x03 line.long 0x00 "__3PSMI1_LPSPI4_SOUT,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x910)++0x03 line.long 0x00 "__3PSMI1_LPSPI5_PCS$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x920++0x03 line.long 0x00 "__3PSMI1_LPSPI5_SCK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x924++0x03 line.long 0x00 "__3PSMI1_LPSPI5_SIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x928++0x03 line.long 0x00 "__3PSMI1_LPSPI5_SOUT,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C ) group.long ($2+0x954)++0x03 line.long 0x00 "__2PSMI1_FLEXSPI2_B_DATA$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x974++0x03 line.long 0x00 "__2PSMI1_FLEXSPI2_B_DQS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x978++0x03 line.long 0x00 "__2PSMI1_FLEXSPI2_B_SCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x97C)++0x03 line.long 0x00 "__2PSMI1_TPM6_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x994++0x03 line.long 0x00 "__1PSMI1_TPM6_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x998)++0x03 line.long 0x00 "__1PSMI1_TPM7_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0x9B0++0x03 line.long 0x00 "__1PSMI1_TPM7_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9B4++0x03 line.long 0x00 "__1PSMI1_LPI2C6_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9B8++0x03 line.long 0x00 "__1PSMI1_LPI2C6_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9BC++0x03 line.long 0x00 "__1PSMI1_LPI2C6_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9C0++0x03 line.long 0x00 "__1PSMI1_LPI2C7_HREQ,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9C4++0x03 line.long 0x00 "__1PSMI1_LPI2C7_SCL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9C8++0x03 line.long 0x00 "__1PSMI1_LPI2C7_SDA,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9CC++0x03 line.long 0x00 "__1PSMI1_LPUART6_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9D0++0x03 line.long 0x00 "__1PSMI1_LPUART6_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9D4++0x03 line.long 0x00 "__1PSMI1_LPUART6_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9D8++0x03 line.long 0x00 "__1PSMI1_LPUART7_CTS_b,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9DC++0x03 line.long 0x00 "__1PSMI1_LPUART7_RX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0x9E0++0x03 line.long 0x00 "__1PSMI1_LPUART7_TX,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA58++0x03 line.long 0x00 "__0PSMI1_SDHC1_CD,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA5C++0x03 line.long 0x00 "__0PSMI1_SDHC1_CLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA60++0x03 line.long 0x00 "__0PSMI1_SDHC1_CMD,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C ) group.long ($2+0xA64)++0x03 line.long 0x00 "__0PSMI1_SDHC1_D$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xA84++0x03 line.long 0x00 "__0PSMI1_SDHC1_DQS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA88++0x03 line.long 0x00 "__0PSMI1_SDHC1_WP,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA8C++0x03 line.long 0x00 "__0PSMI1_SDHC2_CD,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA90++0x03 line.long 0x00 "__0PSMI1_SDHC2_CLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xA94++0x03 line.long 0x00 "__0PSMI1_SDHC2_CMD,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C ) group.long ($2+0xA98)++0x03 line.long 0x00 "__0PSMI1_SDHC2_D$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xAB8++0x03 line.long 0x00 "__0PSMI1_SDHC2_DQS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xABC++0x03 line.long 0x00 "__0PSMI1_SDHC2_WP,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAC0++0x03 line.long 0x00 "__0PSMI1_USB0_OC,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAC4++0x03 line.long 0x00 "__0PSMI1_USB1_OC,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAC8++0x03 line.long 0x00 "__0PSMI1_USB0_ID,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xACC++0x03 line.long 0x00 "__0PSMI1_USB1_ID,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAD0++0x03 line.long 0x00 "__0PSMI1_ENET0_1588_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xAD4)++0x03 line.long 0x00 "__0PSMI1_ENET0_1588_TMR$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xAE4++0x03 line.long 0x00 "__0PSMI1_ENET0_COL,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAE8++0x03 line.long 0x00 "__0PSMI1_ENET0_CRS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAEC++0x03 line.long 0x00 "__0PSMI1_ENET0_CRS_DV,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAF0++0x03 line.long 0x00 "__0PSMI1_ENET0_MDIO,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xAF4++0x03 line.long 0x00 "__0PSMI1_ENET0_REFCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xAF8)++0x03 line.long 0x00 "__0PSMI1_ENET0_RXD$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xB08++0x03 line.long 0x00 "__0PSMI1_ENET0_RXER,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB0C++0x03 line.long 0x00 "__0PSMI1_ENET0_RXCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB10++0x03 line.long 0x00 "__0PSMI1_ENET0_TXCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB14++0x03 line.long 0x00 "__0PSMI1_EXT_AUD_MCLK3,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0xB18)++0x03 line.long 0x00 "__0PSMI1_TPM8_CH$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xB30++0x03 line.long 0x00 "__0PSMI1_TPM8_CLKIN,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xB34)++0x03 line.long 0x00 "__0PSMI1_I2S6_RXD$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xB44++0x03 line.long 0x00 "__0PSMI1_I2S6_RX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB48++0x03 line.long 0x00 "__0PSMI1_I2S6_RX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB4C++0x03 line.long 0x00 "__0PSMI1_I2S6_TX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB50++0x03 line.long 0x00 "__0PSMI1_I2S6_TX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xB54)++0x03 line.long 0x00 "__0PSMI1_I2S7_RXD$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end group.long 0xB64++0x03 line.long 0x00 "__0PSMI1_I2S7_RX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB68++0x03 line.long 0x00 "__0PSMI1_I2S7_RX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB6C++0x03 line.long 0x00 "__0PSMI1_I2S7_TX_BCLK,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." group.long 0xB70++0x03 line.long 0x00 "__0PSMI1_I2S7_TX_FS,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat 4. (strings "1" "2" "3" "4" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xB74)++0x03 line.long 0x00 "__0PSMI1_SPDIF_IN$1,Module Input Source Selection Register" bitfld.long 0x00 15. "INV,Input path inversion" "0: Do not inverts signal polarity,1: Inverts signal polarity" bitfld.long 0x00 0.--3. "SSS,Source Selection" "0: No input Pad is selected,1: Defines Pad source,?..." repeat.end tree.end tree.end tree "ISI (ISI Memory Map)" base ad:0x2DAC0000 group.long 0x00++0x03 line.long 0x00 "CHNL_CTRL,Channel Control Register" bitfld.long 0x00 31. "CHNL_EN,Enable channel processing" "0: Processing channel is disabled,1: Processing channel is enabled" bitfld.long 0x00 30. "CLK_EN,Channel clock enable" "0: Channel processing clock is disabled,1: Channel processing clock is enabled" newline bitfld.long 0x00 29. "CHNL_BYPASS,Channel bypass enable" "0: Channel is not bypassed,1: Channel is bypassed" bitfld.long 0x00 25.--26. "CHAIN_BUF,Chain line buffer control" "0: No line buffers chained (supports 2048 or..,1: 2 line buffers chained (supports 4096..,?..." newline bitfld.long 0x00 24. "SW_RST,Software reset bit" "0: sft_reset_dis,1: Channel pipeline is under software reset" bitfld.long 0x00 22. "RAW_MSB_ALIGN,Virtual channel ID" "0: LSB aligned selection,1: MSB aligned selection" newline rbitfld.long 0x00 18.--21. "VER_ID,Version ID for the IP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "VC_ID_1,Virtual channel ID" "0: Virtual Channel 0 to 3 selected,1: Virtual Channel 4 to 7 selected" newline bitfld.long 0x00 8.--10. "SEC_LB_SRC,Secondary line buffer source" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6.--7. "VC_ID_0,Virtual channel ID" "0: Virtual Channel 0 selected or no virtual..,1: Virtual Channel 1 selected,2: Virtual Channel 2 selected,3: Virtual Channel 3 selected" newline bitfld.long 0x00 4. "SRC_TYPE,Type of selected input image source" "0: Image input source is Pixel Link,1: Image input source is Memory" bitfld.long 0x00 0. "SRC,Input image source port selection" "0: Image will be sourced from input port 0 of..,1: Image will be sourced from input port 1 of.." group.long 0x04++0x03 line.long 0x00 "CHNL_IMG_CTRL,Channel Image Control Register" rbitfld.long 0x00 31. "RSVD0,Reserved field" "0,1" hexmask.long.byte 0x00 24.--30. 1. "FORMAT,Output image format" newline hexmask.long.byte 0x00 16.--23. 1. "GBL_ALPHA_VAL,Global alpha value" bitfld.long 0x00 15. "GBL_ALPHA_EN,Global alpha value insertion enable" "0: Global Alpha value insertion is disabled,1: Global Alpha value insertion is enabled" newline bitfld.long 0x00 12.--14. "DEINT,De-interlace control" "0: No de-interlacing done,1: No de-interlacing done,2: Weave de-interlacing (Odd Even) method used,3: Weave de-interlacing (Even Odd) method used,4: Blending or linear interpolation (Odd + Even)..,5: Blending or linear interpolation (Even + Odd)..,6: Line doubling de-interlacing method used,7: Line doubling de-interlacing method used" bitfld.long 0x00 10.--11. "DEC_X,Horizontal pre-decimation control" "0: Pre-decimation filter is disabled,1: Decimate by 2,2: Decimate by 4,3: Decimate by 8" newline bitfld.long 0x00 8.--9. "DEC_Y,Vertical pre-decimation control" "0: Pre-decimation filter is disabled,1: Decimate by 2,2: Decimate by 4,3: Decimate by 8" bitfld.long 0x00 7. "CROP_EN,Output image cropping enable" "0: Image cropping is disabled,1: Image cropping is enabled" newline bitfld.long 0x00 6. "VFLIP_EN,Veritical flip control" "0: Vertical image flip disabled,1: Vertical image flip enabled" bitfld.long 0x00 5. "HFLIP_EN,Horizontal flip control" "0: Horizantal image flip disabled,1: Horizontal image flip enabled" newline rbitfld.long 0x00 4. "RSVD2,Reserved field" "0,1" bitfld.long 0x00 3. "YCBCR_MODE,YCbCr Mode" "0: YCbCr mode is disabled,1: YCbCr mode is enabled" newline bitfld.long 0x00 1.--2. "CSC_MODE,Color Space Conversion operating mode" "0: Convert from YUV to RGB,1: Convert from YCbCr to RGB,2: Convert from RGB to YUV,3: Convert from RGB to YCbCr" bitfld.long 0x00 0. "CSC_BYP,Color Space Conversion bypass control" "0: CSC is operational,1: CSC is bypassed" group.long 0x08++0x03 line.long 0x00 "CHNL_OUT_BUF_CTRL,Channel Output Buffer Control Register" bitfld.long 0x00 31. "MAX_WR_BEATS_Y,Maximum AXI write beats for Y-buffer" "0: Maximum write beats per write request are 8..,1: Maximum write beats per write request are 16.." bitfld.long 0x00 30. "MAX_WR_BEATS_UV,Maximum AXI write beats for U and V-buffers" "0: Maximum write beats per write request are 8..,1: Maximum write beats per write request are 16.." newline bitfld.long 0x00 16.--19. "PANIC_SET_THD_V,Overflow panic set threshold value for V output buffer" "0: No panic alert will be asserted,1: Panic will assert when buffer is n * 6.25%..,2: Panic will assert when buffer is n * 6.25%..,3: Panic will assert when buffer is n * 6.25%..,4: Panic will assert when buffer is n * 6.25%..,5: Panic will assert when buffer is n * 6.25%..,6: Panic will assert when buffer is n * 6.25%..,7: Panic will assert when buffer is n * 6.25%..,8: Panic will assert when buffer is n * 6.25%..,9: Panic will assert when buffer is n * 6.25%..,?..." bitfld.long 0x00 15. "LOAD_BUF2_ADDR,Load Buffer 2 Address from CHNLOUT_BUF2_ADDR_* registers" "0,1" newline bitfld.long 0x00 14. "LOAD_BUF1_ADDR,Load Buffer 1 Address from CHNLOUT_BUF1_ADDR_* registers" "0,1" bitfld.long 0x00 8.--11. "PANIC_SET_THD_U,Overflow panic set threshold value for U output buffer" "0: No panic alert will be asserted,1: Panic will assert when buffer is n * 6.25%..,2: Panic will assert when buffer is n * 6.25%..,3: Panic will assert when buffer is n * 6.25%..,4: Panic will assert when buffer is n * 6.25%..,5: Panic will assert when buffer is n * 6.25%..,6: Panic will assert when buffer is n * 6.25%..,7: Panic will assert when buffer is n * 6.25%..,8: Panic will assert when buffer is n * 6.25%..,9: Panic will assert when buffer is n * 6.25%..,?..." newline bitfld.long 0x00 0.--3. "PANIC_SET_THD_Y,Overflow panic set threshold value for Y/RGB output buffer" "0: No panic alert will be asserted,1: Panic will assert when buffer is n * 6.25%..,2: Panic will assert when buffer is n * 6.25%..,3: Panic will assert when buffer is n * 6.25%..,4: Panic will assert when buffer is n * 6.25%..,5: Panic will assert when buffer is n * 6.25%..,6: Panic will assert when buffer is n * 6.25%..,7: Panic will assert when buffer is n * 6.25%..,8: Panic will assert when buffer is n * 6.25%..,9: Panic will assert when buffer is n * 6.25%..,?..." group.long 0x0C++0x03 line.long 0x00 "CHNL_IMG_CFG,Channel Image Configuration" rbitfld.long 0x00 29.--31. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 16.--28. 1. "HEIGHT,Input image height (lines)" newline rbitfld.long 0x00 13.--15. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--12. 1. "WIDTH,Input image width (pixels)" group.long 0x10++0x03 line.long 0x00 "CHNL_IER,Channel Interrupt Enable Register" bitfld.long 0x00 31. "MEM_RD_DONE_EN,Memory read complete interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 30. "LINE_RCVD_EN,Line received interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x00 29. "FRM_RCVD_EN,Frame received interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 28. "AXI_WR_ERR_V_EN,AXI bus read error interrupt enable bit for V data buffer" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x00 27. "AXI_WR_ERR_U_EN,AXI bus read error interrupt enable bit for U data buffer" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 26. "AXI_WR_ERR_Y_EN,AXI bus read error interrupt enable bit for Y/RGB data buffer" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x00 25. "AXI_RD_ERR_EN,AXI bus read error interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 23. "PANIC_V_BUF_EN,V output buffer potential overflow panic interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x00 22. "OFLW_V_BUF_EN,V output buffer overflow interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 21. "PANIC_U_BUF_EN,U output buffer potential overflow panic interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x00 20. "OFLW_U_BUF_EN,U output buffer overflow interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 19. "PANIC_Y_BUF_EN,Y output buffer potential overflow panic interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" newline bitfld.long 0x00 18. "OFLW_Y_BUF_EN,Y output buffer overflow interrupt enable bit" "0: Interrupt is disabled,1: Interrupt is enabled" bitfld.long 0x00 17. "EARLY_VSYNC_ERR_EN,VSYNC timing (Early) error interrupt enable bit" "0: early_vsync_err_int_dis,1: early_vsync_err_int_en" newline bitfld.long 0x00 16. "LATE_VSYNC_ERR_EN,VSYNC timing (Late) error interrupt enable bit" "0: late_vsync_er_int_dis,1: late_vsync_er_int_en" hexmask.long.word 0x00 0.--15. 1. "RSVD0,Reserved field" group.long 0x14++0x03 line.long 0x00 "CHNL_STS,Channel Status Register" eventfld.long 0x00 31. "MEM_RD_DONE,Memory read complete interrupt flag" "0: Image read from memory not complete or not..,1: Image read from memory completed" eventfld.long 0x00 30. "LINE_STRD,Line received and stored interrupt flag" "0: No new line received,1: New line received and stored into memory" newline eventfld.long 0x00 29. "FRM_STRD,Frame stored successfully interrupt flag" "0: No frame being received or in progress,1: One full frame has been received and stored.." eventfld.long 0x00 28. "AXI_WR_ERR_V,AXI Bus write error interrupt flag for V data buffer" "0: No error,1: Error occured during" newline eventfld.long 0x00 27. "AXI_WR_ERR_U,AXI Bus write error interrupt flag for U data buffer" "0: no_err_u,1: Error occured during" eventfld.long 0x00 26. "AXI_WR_ERR_Y,AXI Bus write error interrupt flag for Y/RGB data buffer" "0: no_err_y,1: Error occured during" newline eventfld.long 0x00 25. "AXI_RD_ERR,AXI Bus read error interrupt flag" "0: no_err_rd,1: Error occured during" eventfld.long 0x00 23. "PANIC_V_BUF,V output buffer potential overflow panic alert interrupt flag" "0: Buffer has not crossed the panic threshold..,1: Panic threshold limit crossed" newline eventfld.long 0x00 22. "OFLW_V_BUF,Overflow in U output buffer interrupt flag" "0: No overflow,1: Overflow has occured in the channel" eventfld.long 0x00 21. "PANIC_U_BUF,U output buffer potential overflow panic alert interrupt flag" "0: Buffer has not crossed the panic threshold..,1: Panic threshold limit crossed" newline eventfld.long 0x00 20. "OFLW_U_BUF,Overflow in U output buffer interrupt flag" "0: No overflow,1: Overflow has occured in the channel" eventfld.long 0x00 19. "PANIC_Y_BUF,Y/RGB output buffer potential overflow panic alert interrupt flag" "0: Buffer has not crossed the panic threshold..,1: Panic threshold limit crossed" newline eventfld.long 0x00 18. "OFLW_Y_BUF,Overflow in Y/RGB output buffer interrupt flag" "0: No overflow,1: Overflow has occured in the channel" eventfld.long 0x00 17. "EARLY_VSYNC_ERR,VSYNC timing (Early) error interrupt flag" "0: no_early_vsync,1: VSYNC detected earlier than expected" newline eventfld.long 0x00 16. "LATE_VSYNC_ERR,VSYNC timing (Late) error interrupt flag" "0: no_later_vsync,1: VSYNC detected later than expected" rbitfld.long 0x00 11.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 10. "MEM_RD_OFLOW,Memory read FIFO overflow error status" "0: No overflow occurred during memory,1: FIFO overflow occurred during memory" rbitfld.long 0x00 9. "BUF2_ACTIVE,Current frame being stored in Buffer 2 Address" "0: Buffer 2 Address inactive,1: Buffer 2 Address in use" newline rbitfld.long 0x00 8. "BUF1_ACTIVE,Current frame being stored in Buffer 1 Address" "0: Buffer 1 Address inactive,1: Buffer 1 Address in use" group.long 0x18++0x03 line.long 0x00 "CHNL_SCALE_FACTOR,Channel Scale Factor Register" rbitfld.long 0x00 30.--31. "RSVD0,Reserved field" "0,1,2,3" hexmask.long.word 0x00 16.--29. 1. "Y_SCALE,Vertical scaling factor" newline rbitfld.long 0x00 14.--15. "RSVD1,Reserved field" "0,1,2,3" hexmask.long.word 0x00 0.--13. 1. "X_SCALE,Horizontal scaling factor" group.long 0x1C++0x03 line.long 0x00 "CHNL_SCALE_OFFSET,Channel Scale Offset Register" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "Y_OFFSET,Vertical scaling offset" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "X_OFFSET,Horizontal scaling offset" group.long 0x20++0x03 line.long 0x00 "CHNL_CROP_ULC,Channel Crop Upper Left Corner Coordinate Register" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Upper Left Y-coordinate" group.long 0x24++0x03 line.long 0x00 "CHNL_CROP_LRC,Channel Crop Lower Right Corner Coordinate Register" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Lower Right Y-coordinate" group.long 0x28++0x03 line.long 0x00 "CHNL_CSC_COEFF0,Channel Color Space Conversion Coefficient Register 0" rbitfld.long 0x00 27.--31. "RSVD0,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--26. 1. "A2,CSC Coefficient A2 value" newline rbitfld.long 0x00 11.--15. "RSVD1,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--10. 1. "A1,CSC Coefficient A1 value" group.long 0x2C++0x03 line.long 0x00 "CHNL_CSC_COEFF1,Channel Color Space Conversion Coefficient Register 1" rbitfld.long 0x00 27.--31. "RSVD0,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--26. 1. "B1,CSC Coefficient B1 value" newline rbitfld.long 0x00 11.--15. "RSVD1,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--10. 1. "A3,CSC Coefficient A3 value" group.long 0x30++0x03 line.long 0x00 "CHNL_CSC_COEFF2,Channel Color Space Conversion Coefficient Register 2" rbitfld.long 0x00 27.--31. "RSVD0,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--26. 1. "B3,CSC Coefficient B3 value" newline rbitfld.long 0x00 11.--15. "RSVD1,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--10. 1. "B2,CSC Coefficient B2 value" group.long 0x34++0x03 line.long 0x00 "CHNL_CSC_COEFF3,Channel Color Space Conversion Coefficient Register 3" rbitfld.long 0x00 27.--31. "RSVD0,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--26. 1. "C2,CSC Coefficient C2 value" newline rbitfld.long 0x00 11.--15. "RSVD1,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--10. 1. "C1,CSC Coefficient C1 value" group.long 0x38++0x03 line.long 0x00 "CHNL_CSC_COEFF4,Channel Color Space Conversion Coefficient Register 4" hexmask.long.byte 0x00 25.--31. 1. "RSVD0,Reserved Field" hexmask.long.word 0x00 16.--24. 1. "D1,CSC Coefficient D1 value" newline rbitfld.long 0x00 11.--15. "RSVD1,Reserved Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--10. 1. "C3,CSC Coefficient C3 value" group.long 0x3C++0x03 line.long 0x00 "CHNL_CSC_COEFF5,Channel Color Space Conversion Coefficient Register 5" hexmask.long.byte 0x00 25.--31. 1. "RSVD0,Reserved Field" hexmask.long.word 0x00 16.--24. 1. "D3,CSC Coefficient D3 value" newline hexmask.long.byte 0x00 9.--15. 1. "RSVD1,Reserved Field" hexmask.long.word 0x00 0.--8. 1. "D2,CSC Coefficient D2 value" group.long 0x40++0x03 line.long 0x00 "CHNL_ROI_0_ALPHA,Channel Alpha Value Register for Region of Interest 0" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" hexmask.long.byte 0x00 17.--23. 1. "RSVD0,Reserved field" newline bitfld.long 0x00 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" hexmask.long.word 0x00 0.--15. 1. "RSVD1,Reserved field" group.long 0x44++0x03 line.long 0x00 "CHNL_ROI_0_ULC,Channel Upper Left Coordinate Register for Region of Interest 0" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Upper Left Y-coordinate" group.long 0x48++0x03 line.long 0x00 "CHNL_ROI_0_LRC,Channel Lower Right Coordinate Register for Region of Interest 0" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Lower Right Y-coordinate" group.long 0x4C++0x03 line.long 0x00 "CHNL_ROI_1_ALPHA,Channel Alpha Value Register for Region of Interest 1" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" hexmask.long.byte 0x00 17.--23. 1. "RSVD0,Reserved field" newline bitfld.long 0x00 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" hexmask.long.word 0x00 0.--15. 1. "RSVD1,Reserved field" group.long 0x50++0x03 line.long 0x00 "CHNL_ROI_1_ULC,Channel Upper Left Coordinate Register for Region of Interest 1" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Upper Left Y-coordinate" group.long 0x54++0x03 line.long 0x00 "CHNL_ROI_1_LRC,Channel Lower Right Coordinate Register for Region of Interest 1" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Lower Right Y-coordinate" group.long 0x58++0x03 line.long 0x00 "CHNL_ROI_2_ALPHA,Channel Alpha Value Register for Region of Interest 2" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" hexmask.long.byte 0x00 17.--23. 1. "RSVD0,Reserved field" newline bitfld.long 0x00 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" hexmask.long.word 0x00 0.--15. 1. "RSVD1,Reserved field" group.long 0x5C++0x03 line.long 0x00 "CHNL_ROI_2_ULC,Channel Upper Left Coordinate Register for Region of Interest 2" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Upper Left Y-coordinate" group.long 0x60++0x03 line.long 0x00 "CHNL_ROI_2_LRC,Channel Lower Right Coordinate Register for Region of Interest 2" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Lower Right Y-coordinate" group.long 0x64++0x03 line.long 0x00 "CHNL_ROI_3_ALPHA,Channel Alpha Value Register for Region of Interest 3" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,Alpha Value to be inserted with image" hexmask.long.byte 0x00 17.--23. 1. "RSVD0,Reserved field" newline bitfld.long 0x00 16. "ALPHA_EN,Alpha value insertion enable" "0: Alpha value insertion is disabled,1: Alpha value insertion is enabled" hexmask.long.word 0x00 0.--15. 1. "RSVD1,Reserved field" group.long 0x68++0x03 line.long 0x00 "CHNL_ROI_3_ULC,Channel Upper Left Coordinate Register for Region of Interest 3" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Upper Left X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Upper Left Y-coordinate" group.long 0x6C++0x03 line.long 0x00 "CHNL_ROI_3_LRC,Channel Lower Right Coordinate Register for Region of Interest 3" rbitfld.long 0x00 28.--31. "RSVD0,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--27. 1. "X,Lower Right X-coordinate" newline rbitfld.long 0x00 12.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. "Y,Lower Right Y-coordinate" group.long 0x70++0x03 line.long 0x00 "CHNL_OUT_BUF1_ADDR_Y,Channel RGB or Luma (Y) Output Buffer 1 Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting address for the RGB or Y (luma) memory location" group.long 0x74++0x03 line.long 0x00 "CHNL_OUT_BUF1_ADDR_U,Channel Chroma (U/Cb/UV/CbCr) Output Buffer 1 Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting address for the U/Cb or 2 plane UV/CbCr Chroma memory location" group.long 0x78++0x03 line.long 0x00 "CHNL_OUT_BUF1_ADDR_V,Channel Chroma (V/Cr) Output Buffer 1 Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting address for the V/Cr memory location" group.long 0x7C++0x03 line.long 0x00 "CHNL_OUT_BUF_PITCH,Channel Output Buffer Pitch" hexmask.long.word 0x00 0.--15. 1. "LINE_PITCH,Output Buffer Line Pitch" group.long 0x80++0x03 line.long 0x00 "CHNL_IN_BUF_ADDR,Channel Input Buffer Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting Address from where the input image is read in from" group.long 0x84++0x03 line.long 0x00 "CHNL_IN_BUF_PITCH,Channel Input Buffer Pitch" hexmask.long.word 0x00 16.--31. 1. "FRM_PITCH,Frame Pitch" hexmask.long.word 0x00 0.--15. 1. "LINE_PITCH,Line Pitch" group.long 0x88++0x03 line.long 0x00 "CHNL_MEM_RD_CTRL,Channel Memory Read Control" bitfld.long 0x00 28.--31. "IMG_TYPE,Input image format" "0: BGR8P - BGR format with 8-bits per color..,1: RGB8P - RGB format with 8-bits per color..,2: XRGB8 - RGB format with 8-bits per color..,3: RGBX8 - RGB format with 8-bits per color..,4: XBGR8 - BGR format with 8-bits per color..,5: RGB565 - RGB format with 5-bits of R B 6-bits..,6: A2BGR10 - BGR format with 2-bits alpha in MSB..,7: A2RGB10 - RGB format with 2-bits alpha in MSB..,8: YUV444_1P8P with 8-bits per color component..,9: YUV444_1P10 with 10-bits per color component..,10: YUV444_1P10P with 10-bits per color..,11: YUV444_1P12 with 12-bits per color component..,12: YUV444_1P8 with 8-bits per color component..,13: YUV422_1P8P with 8-bits per color component..,14: YUV422_1P10 with 10-bits per color component..,15: YUV422_1P12 with 12-bits per color component.." hexmask.long 0x00 1.--27. 1. "RSVD0,Reserved field" newline bitfld.long 0x00 0. "READ_MEM,Initiate read from memory" "0: No reads from memory done,1: Reads from memory initiated" group.long 0x8C++0x03 line.long 0x00 "CHNL_OUT_BUF2_ADDR_Y,Channel RGB or Luma (Y) Output Buffer 2 Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting address for the RGB or Y (luma) memory location" group.long 0x90++0x03 line.long 0x00 "CHNL_OUT_BUF2_ADDR_U,Channel Chroma (U/Cb/UV/CbCr) Output Buffer 2 Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting address for the U/Cb or 2 plane UV/CbCr Chroma memory location" group.long 0x94++0x03 line.long 0x00 "CHNL_OUT_BUF2_ADDR_V,Channel Chroma (V/Cr) Output Buffer 2 Address" hexmask.long 0x00 0.--31. 1. "ADDR,Starting address for the V/Cr memory location" group.long 0x98++0x03 line.long 0x00 "CHNL_SCL_IMG_CFG,Channel Scaled Image Configuration" rbitfld.long 0x00 29.--31. "RSVD3,Reserved field" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 16.--28. 1. "HEIGHT,Scaled image height (lines)" newline rbitfld.long 0x00 13.--15. "RSVD1,Reserved field" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--12. 1. "WIDTH,Scaled image width (pixels)" group.long 0x9C++0x03 line.long 0x00 "CHNL_FLOW_CTRL,Channel Flow Control Register" hexmask.long.byte 0x00 16.--23. 1. "FC_NUMER,Numertor value of fraction of usable bandwidth" hexmask.long.byte 0x00 0.--7. 1. "FC_DENOM,Denominator value of fraction of usable bandwidth" group.long 0xC0++0x03 line.long 0x00 "PXL_DATA_ADDR_OFFST_BUF1,RAW32 Pixel Data Offset" hexmask.long 0x00 0.--31. 1. "PIX_OFFST_1,Pixel Data Offset" group.long 0xC4++0x03 line.long 0x00 "PXL_DATA_ADDR_OFFST_BUF2,RAW32 Pixel Data Offset" hexmask.long 0x00 0.--31. 1. "PIX_OFFST_2,Pixel Data Offset" group.long 0xC8++0x03 line.long 0x00 "STAT_DATA_ADDR_OFFST_BUF1,RAW32 Statistics Data Offset" hexmask.long 0x00 0.--31. 1. "STAT_OFFST_1,Pixel Data Offset" group.long 0xD0++0x03 line.long 0x00 "STAT_DATA_ADDR_OFFST_BUF2,RAW32 Statistic Data Offset" hexmask.long 0x00 0.--31. 1. "STAT_OFFST_2,Pixel Data Offset" tree.end tree "LPDDR (DATABAHN_REGS)" base ad:0x2E060000 group.long 0x00++0x03 line.long 0x00 "DENALI_CTL_0,DENALI_CTL_0" hexmask.long.word 0x00 16.--31. 1. "CONTROLLER_ID,Holds the controller product id number" bitfld.long 0x00 8.--11. "DRAM_CLASS,Defines the class of DRAM memory which is connected to the controller" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "START,Initiate command processing in the controller" "0,1" group.long 0x28++0x03 line.long 0x00 "DENALI_CTL_10,DENALI_CTL_10" hexmask.long.tbyte 0x00 8.--31. 1. "TINIT_F0,DRAM TINIT value for frequency copy 0 in cycles" hexmask.long.byte 0x00 0.--7. 1. "AXI3_WRCMD_PROC_FIFO_LOG2_DEPTH,Reports the depth of the AXI port 3 write command processing FIFO" group.long 0x2C++0x03 line.long 0x00 "DENALI_CTL_11,DENALI_CTL_11" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT3_F0,DRAM TINIT3 value for frequency copy 0 in cycles" group.long 0x30++0x03 line.long 0x00 "DENALI_CTL_12,DENALI_CTL_12" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT4_F0,DRAM TINIT4 value for frequency copy 0 in cycles" group.long 0x34++0x03 line.long 0x00 "DENALI_CTL_13,DENALI_CTL_13" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT5_F0,DRAM TINIT5 value for frequency copy 0 in cycles" group.long 0x38++0x03 line.long 0x00 "DENALI_CTL_14,DENALI_CTL_14" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT_F1,DRAM TINIT value for frequency copy 1 in cycles" group.long 0x3C++0x03 line.long 0x00 "DENALI_CTL_15,DENALI_CTL_15" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT3_F1,DRAM TINIT3 value for frequency copy 1 in cycles" group.long 0x40++0x03 line.long 0x00 "DENALI_CTL_16,DENALI_CTL_16" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT4_F1,DRAM TINIT4 value for frequency copy 1 in cycles" group.long 0x44++0x03 line.long 0x00 "DENALI_CTL_17,DENALI_CTL_17" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT5_F1,DRAM TINIT5 value for frequency copy 1 in cycles" group.long 0x48++0x03 line.long 0x00 "DENALI_CTL_18,DENALI_CTL_18" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT_F2,DRAM TINIT value for frequency copy 2 in cycles" group.long 0x4C++0x03 line.long 0x00 "DENALI_CTL_19,DENALI_CTL_19" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT3_F2,DRAM TINIT3 value for frequency copy 2 in cycles" group.long 0x50++0x03 line.long 0x00 "DENALI_CTL_20,DENALI_CTL_20" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT4_F2,DRAM TINIT4 value for frequency copy 2 in cycles" group.long 0x54++0x03 line.long 0x00 "DENALI_CTL_21,DENALI_CTL_21" bitfld.long 0x00 24. "NO_AUTO_MRR_INIT,Disable MRR commands during initialization" "0,1" hexmask.long.tbyte 0x00 0.--23. 1. "TINIT5_F2,DRAM TINIT5 value for frequency copy 2 in cycles" group.long 0x58++0x03 line.long 0x00 "DENALI_CTL_22,DENALI_CTL_22" bitfld.long 0x00 24. "ODT_VALUE,When using LPDDR4 this value will be driven out on the dfi_odt signal" "0,1" bitfld.long 0x00 16. "NO_MRW_INIT,Disable MRW commands during initialization" "0,1" newline bitfld.long 0x00 8. "DFI_INV_DATA_CS,Forces the inversion of the dfi_rddata_cs_n_X and dfi_wrdata_cs_n_X signals" "0,1" rbitfld.long 0x00 0. "MRR_ERROR_STATUS,Indicates that an MRR was issued while in self-refresh" "0,1" group.long 0x5C++0x03 line.long 0x00 "DENALI_CTL_23,DENALI_CTL_23" bitfld.long 0x00 24.--25. "DFIBUS_FREQ_INIT,Defines the initial DFI bus frequency" "0,1,2,3" bitfld.long 0x00 16. "PHY_INDEP_INIT_MODE,Enable PHY independent initailization mode commands during initialization" "0,1" newline bitfld.long 0x00 8.--13. "TSREF2PHYMSTR,TSREF2PHYMSTR" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0. "PHY_INDEP_TRAIN_MODE,Enable PHY independent training mode commands during initialization" "0,1" group.long 0x60++0x03 line.long 0x00 "DENALI_CTL_24,DENALI_CTL_24" bitfld.long 0x00 24.--28. "DFIBUS_FREQ_F2,Defines the DFI bus frequency for frequency copy 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "DFIBUS_FREQ_F1,Defines the DFI bus frequency for frequency copy 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "DFIBUS_FREQ_F0,Defines the DFI bus frequency for frequency copy 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--1. "DFIBUS_BOOT_FREQ,Defines the DFI bus boot frequency" "0,1,2,3" group.long 0x64++0x03 line.long 0x00 "DENALI_CTL_25,DENALI_CTL_25" bitfld.long 0x00 16.--17. "FREQ_CHANGE_TYPE_F2,Defines the encoded frequency driven out on the cntrl_freq_change_req_type signal during a frequency change operation" "0,1,2,3" bitfld.long 0x00 8.--9. "FREQ_CHANGE_TYPE_F1,Defines the encoded frequency driven out on the cntrl_freq_change_req_type signal during a frequency change operation" "0,1,2,3" newline bitfld.long 0x00 0.--1. "FREQ_CHANGE_TYPE_F0,Defines the encoded frequency driven out on the cntrl_freq_change_req_type signal during a frequency change operation" "0,1,2,3" group.long 0x68++0x03 line.long 0x00 "DENALI_CTL_26,DENALI_CTL_26" hexmask.long 0x00 0.--31. 1. "TRST_PWRON,Duration of memory reset during power-on initialization" group.long 0x6C++0x03 line.long 0x00 "DENALI_CTL_27,DENALI_CTL_27" hexmask.long 0x00 0.--31. 1. "CKE_INACTIVE,Number of cycles after reset before CKE will be active" group.long 0x78++0x03 line.long 0x00 "DENALI_CTL_30,DENALI_CTL_30" hexmask.long.byte 0x00 24.--31. 1. "TOSCO_F0,Number of cycles for tOSCO timing parameter for frequency copy 0" bitfld.long 0x00 16.--19. "FUNC_VALID_CYCLES,Number of cycles to hold dfi_function_valid asserted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--14. 1. "DQS_OSC_PERIOD,Number of cycles to run the oscillator measurement" group.long 0x7C++0x03 line.long 0x00 "DENALI_CTL_31,DENALI_CTL_31" hexmask.long.byte 0x00 8.--15. 1. "TOSCO_F2,Number of cycles for tOSCO timing parameter for frequency copy 2" hexmask.long.byte 0x00 0.--7. 1. "TOSCO_F1,Number of cycles for tOSCO timing parameter for frequency copy 1" group.long 0xA4++0x03 line.long 0x00 "DENALI_CTL_41,DENALI_CTL_41" hexmask.long.byte 0x00 24.--30. 1. "WRLAT_F1,DRAM WRLAT value for frequency copy 1 in cycles" hexmask.long.byte 0x00 16.--22. 1. "CASLAT_LIN_F1,Sets latency from read command send to data receive from/to controller for frequency copy 1" newline hexmask.long.byte 0x00 8.--14. 1. "WRLAT_F0,DRAM WRLAT value for frequency copy 0 in cycles" hexmask.long.byte 0x00 0.--6. 1. "CASLAT_LIN_F0,Sets latency from read command send to data receive from/to controller for frequency copy 0" group.long 0xA8++0x03 line.long 0x00 "DENALI_CTL_42,DENALI_CTL_42" bitfld.long 0x00 24.--28. "TCCD,DRAM CAS-to-CAS value in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--18. "TBST_INT_INTERVAL,DRAM burst interrupt interval value in cycles" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--14. 1. "WRLAT_F2,DRAM WRLAT value for frequency copy 2 in cycles" hexmask.long.byte 0x00 0.--6. 1. "CASLAT_LIN_F2,Sets latency from read command send to data receive from/to controller for frequency copy 2" group.long 0xAC++0x03 line.long 0x00 "DENALI_CTL_43,DENALI_CTL_43" hexmask.long.word 0x00 8.--16. 1. "TRC_F0,DRAM TRC value for frequency copy 0 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TRRD_F0,DRAM TRRD value for frequency copy 0 in cycles" group.long 0xB0++0x03 line.long 0x00 "DENALI_CTL_44,DENALI_CTL_44" hexmask.long.byte 0x00 24.--31. 1. "TRP_F0,DRAM TRP value for frequency copy 0 in cycles" bitfld.long 0x00 16.--21. "TWTR_F0,DRAM TWTR value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 0.--8. 1. "TRAS_MIN_F0,DRAM TRAS_MIN value for frequency copy 0 in cycles" group.long 0xB4++0x03 line.long 0x00 "DENALI_CTL_45,DENALI_CTL_45" hexmask.long.byte 0x00 16.--23. 1. "TRRD_F1,DRAM TRRD value for frequency copy 1 in cycles" hexmask.long.word 0x00 0.--8. 1. "TFAW_F0,DRAM TFAW value for frequency copy 0 in cycles" group.long 0xB8++0x03 line.long 0x00 "DENALI_CTL_46,DENALI_CTL_46" hexmask.long.word 0x00 16.--24. 1. "TRAS_MIN_F1,DRAM TRAS_MIN value for frequency copy 1 in cycles" hexmask.long.word 0x00 0.--8. 1. "TRC_F1,DRAM TRC value for frequency copy 1 in cycles" group.long 0xBC++0x03 line.long 0x00 "DENALI_CTL_47,DENALI_CTL_47" hexmask.long.word 0x00 16.--24. 1. "TFAW_F1,DRAM TFAW value for frequency copy 1 in cycles" hexmask.long.byte 0x00 8.--15. 1. "TRP_F1,DRAM TRP value for frequency copy 1 in cycles" newline bitfld.long 0x00 0.--5. "TWTR_F1,DRAM TWTR value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC0++0x03 line.long 0x00 "DENALI_CTL_48,DENALI_CTL_48" hexmask.long.word 0x00 8.--16. 1. "TRC_F2,DRAM TRC value for frequency copy 2 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TRRD_F2,DRAM TRRD value for frequency copy 2 in cycles" group.long 0xC4++0x03 line.long 0x00 "DENALI_CTL_49,DENALI_CTL_49" hexmask.long.byte 0x00 24.--31. 1. "TRP_F2,DRAM TRP value for frequency copy 2 in cycles" bitfld.long 0x00 16.--21. "TWTR_F2,DRAM TWTR value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 0.--8. 1. "TRAS_MIN_F2,DRAM TRAS_MIN value for frequency copy 2 in cycles" group.long 0xC8++0x03 line.long 0x00 "DENALI_CTL_50,DENALI_CTL_50" hexmask.long.byte 0x00 24.--31. 1. "TRTP_F0,DRAM TRTP value for frequency copy 0 in cycles" bitfld.long 0x00 16.--21. "TCCDMW,DRAM CAS-to-CAS masked write value in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 0.--8. 1. "TFAW_F2,DRAM TFAW value for frequency copy 2 in cycles" group.long 0xCC++0x03 line.long 0x00 "DENALI_CTL_51,DENALI_CTL_51" hexmask.long.byte 0x00 8.--15. 1. "TMOD_F0,DRAM TMOD value for frequency copy 0 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TMRD_F0,DRAM TMRD value for frequency copy 0 in cycles" group.long 0xD0++0x03 line.long 0x00 "DENALI_CTL_52,DENALI_CTL_52" bitfld.long 0x00 24.--28. "TCKE_F0,Minimum CKE pulse width for frequency copy 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.tbyte 0x00 0.--16. 1. "TRAS_MAX_F0,DRAM TRAS_MAX value for frequency copy 0 in cycles" group.long 0xD4++0x03 line.long 0x00 "DENALI_CTL_53,DENALI_CTL_53" hexmask.long.byte 0x00 24.--31. 1. "TMOD_F1,DRAM TMOD value for frequency copy 1 in cycles" hexmask.long.byte 0x00 16.--23. 1. "TMRD_F1,DRAM TMRD value for frequency copy 1 in cycles" newline hexmask.long.byte 0x00 8.--15. 1. "TRTP_F1,DRAM TRTP value for frequency copy 1 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TCKESR_F0,Minimum CKE low pulse width during a self-refresh for frequency copy 0" group.long 0xD8++0x03 line.long 0x00 "DENALI_CTL_54,DENALI_CTL_54" bitfld.long 0x00 24.--28. "TCKE_F1,Minimum CKE pulse width for frequency copy 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.tbyte 0x00 0.--16. 1. "TRAS_MAX_F1,DRAM TRAS_MAX value for frequency copy 1 in cycles" group.long 0xDC++0x03 line.long 0x00 "DENALI_CTL_55,DENALI_CTL_55" hexmask.long.byte 0x00 24.--31. 1. "TMOD_F2,DRAM TMOD value for frequency copy 2 in cycles" hexmask.long.byte 0x00 16.--23. 1. "TMRD_F2,DRAM TMRD value for frequency copy 2 in cycles" newline hexmask.long.byte 0x00 8.--15. 1. "TRTP_F2,DRAM TRTP value for frequency copy 2 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TCKESR_F1,Minimum CKE low pulse width during a self-refresh for frequency copy 1" group.long 0xE0++0x03 line.long 0x00 "DENALI_CTL_56,DENALI_CTL_56" bitfld.long 0x00 24.--28. "TCKE_F2,Minimum CKE pulse width for frequency copy 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.tbyte 0x00 0.--16. 1. "TRAS_MAX_F2,DRAM TRAS_MAX value for frequency copy 2 in cycles" group.long 0xE4++0x03 line.long 0x00 "DENALI_CTL_57,DENALI_CTL_57" bitfld.long 0x00 24.--26. "MC_RESERVED5,MC_RESERVED5" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. "MC_RESERVED4,MC_RESERVED4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--10. "TPPD,DRAM TPPD value in cycles" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 0.--7. 1. "TCKESR_F2,Minimum CKE low pulse width during a self-refresh for frequency copy 2" group.long 0xE8++0x03 line.long 0x00 "DENALI_CTL_58,DENALI_CTL_58" hexmask.long.byte 0x00 24.--31. 1. "TRCD_F1,DRAM TRCD value for frequency copy 1 in cycles" hexmask.long.byte 0x00 16.--23. 1. "TWR_F0,DRAM TWR value for frequency copy 0 in cycles" newline hexmask.long.byte 0x00 8.--15. 1. "TRCD_F0,DRAM TRCD value for frequency copy 0 in cycles" bitfld.long 0x00 0. "WRITEINTERP,Allow controller to interrupt a write burst to the DRAMs with a read command" "0,1" group.long 0xEC++0x03 line.long 0x00 "DENALI_CTL_59,DENALI_CTL_59" bitfld.long 0x00 24.--27. "TMRR,DRAM TMRR value in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 16.--23. 1. "TWR_F2,DRAM TWR value for frequency copy 2 in cycles" newline hexmask.long.byte 0x00 8.--15. 1. "TRCD_F2,DRAM TRCD value for frequency copy 2 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TWR_F1,DRAM TWR value for frequency copy 1 in cycles" group.long 0xF0++0x03 line.long 0x00 "DENALI_CTL_60,DENALI_CTL_60" hexmask.long.byte 0x00 24.--31. 1. "TDAL_F0,DRAM TDAL value for frequency copy 0 in cycles" bitfld.long 0x00 16. "TRAS_LOCKOUT,IF the DRAM supports it this allows the controller to execute auto pre-charge commands before the TRAS_MIN parameter expires" "0,1" newline bitfld.long 0x00 8. "CONCURRENTAP,IF the DRAM supports it this allows the controller to issue commands to other banks while a bank is in auto pre-charge" "0,1" bitfld.long 0x00 0. "AP,Enable auto pre-charge mode of controller" "0,1" group.long 0xF4++0x03 line.long 0x00 "DENALI_CTL_61,DENALI_CTL_61" bitfld.long 0x00 16.--20. "BSTLEN,Encoded burst length sent to DRAMs during initialization" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.byte 0x00 8.--15. 1. "TDAL_F2,DRAM TDAL value for frequency copy 2 in cycles" newline hexmask.long.byte 0x00 0.--7. 1. "TDAL_F1,DRAM TDAL value for frequency copy 1 in cycles" group.long 0x104++0x03 line.long 0x00 "DENALI_CTL_65,DENALI_CTL_65" hexmask.long.word 0x00 16.--25. 1. "TRFC_F0,DRAM TRFC value for frequency copy 0 in cycles" bitfld.long 0x00 8.--12. "CS_COMPARISON_FOR_REFRESH_DEPTH,Defines the number of entries of the command queue that the refresh logic will consider for sending a refresh command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--2. "MC_RESERVED7,MC_RESERVED7" "0,1,2,3,4,5,6,7" group.long 0x108++0x03 line.long 0x00 "DENALI_CTL_66,DENALI_CTL_66" hexmask.long.tbyte 0x00 0.--19. 1. "TREF_F0,DRAM TREF value for frequency copy 0 in cycles" group.long 0x10C++0x03 line.long 0x00 "DENALI_CTL_67,DENALI_CTL_67" hexmask.long.word 0x00 0.--9. 1. "TRFC_F1,DRAM TRFC value for frequency copy 1 in cycles" group.long 0x110++0x03 line.long 0x00 "DENALI_CTL_68,DENALI_CTL_68" hexmask.long.tbyte 0x00 0.--19. 1. "TREF_F1,DRAM TREF value for frequency copy 1 in cycles" group.long 0x114++0x03 line.long 0x00 "DENALI_CTL_69,DENALI_CTL_69" hexmask.long.word 0x00 0.--9. 1. "TRFC_F2,DRAM TRFC value for frequency copy 2 in cycles" group.long 0x118++0x03 line.long 0x00 "DENALI_CTL_70,DENALI_CTL_70" hexmask.long.tbyte 0x00 0.--19. 1. "TREF_F2,DRAM TREF value for frequency copy 2 in cycles" group.long 0x11C++0x03 line.long 0x00 "DENALI_CTL_71,DENALI_CTL_71" hexmask.long.tbyte 0x00 0.--19. 1. "TREF_INTERVAL,Defines the cycles between refreshes to different chip selects" group.long 0x120++0x03 line.long 0x00 "DENALI_CTL_72,DENALI_CTL_72" hexmask.long.word 0x00 16.--25. 1. "TRFC_PB_F0,DRAM TRFC_PB value for frequency copy 0 in cycles" bitfld.long 0x00 8. "PBR_NUMERIC_ORDER,Enables the PBR to run REFpb commands in numeric bank order (0 1 2 3 etc" "0,1" newline bitfld.long 0x00 0. "PBR_EN,Enables the per-bank refresh feature" "0,1" group.long 0x124++0x03 line.long 0x00 "DENALI_CTL_73,DENALI_CTL_73" hexmask.long.word 0x00 16.--25. 1. "TRFC_PB_F1,DRAM TRFC_PB value for frequency copy 1 in cycles" hexmask.long.word 0x00 0.--15. 1. "TREFI_PB_F0,DRAM TREFI_PB value for frequency copy 0 in cycles" group.long 0x128++0x03 line.long 0x00 "DENALI_CTL_74,DENALI_CTL_74" hexmask.long.word 0x00 16.--25. 1. "TRFC_PB_F2,DRAM TRFC_PB value for frequency copy 2 in cycles" hexmask.long.word 0x00 0.--15. 1. "TREFI_PB_F1,DRAM TREFI_PB value for frequency copy 1 in cycles" group.long 0x12C++0x03 line.long 0x00 "DENALI_CTL_75,DENALI_CTL_75" hexmask.long.word 0x00 16.--31. 1. "PBR_MAX_BANK_WAIT,Defines the maximum number of cycles that the PBR module will wait for Strategy to release the target bank until the PBR will assert the inhibit and close the target bank" hexmask.long.word 0x00 0.--15. 1. "TREFI_PB_F2,DRAM TREFI_PB value for frequency copy 2 in cycles" group.long 0x130++0x03 line.long 0x00 "DENALI_CTL_76,DENALI_CTL_76" bitfld.long 0x00 24.--28. "AREF_PBR_CONT_DIS_THRESHOLD,Sets the auto-refresh request count threshold when the PBR continuous refresh request enable will be deasserted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "AREF_PBR_CONT_EN_THRESHOLD,Sets the auto-refresh request count threshold when the PBR continuous refresh request enable will be asserted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "PBR_CONT_REQ_EN,Enables the per-bank refresh continuous request feature" "0,1" bitfld.long 0x00 0.--3. "PBR_BANK_SELECT_DELAY,Defines the PBR bank select to command delay the time from bank selection to when the command queue bank selection logic is guaranteed to have blocked the bank" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x134++0x03 line.long 0x00 "DENALI_CTL_77,DENALI_CTL_77" hexmask.long.word 0x00 16.--31. 1. "TPDEX_F1,DRAM TPDEX value for frequency copy 1 in cycles" hexmask.long.word 0x00 0.--15. 1. "TPDEX_F0,DRAM TPDEX value for frequency copy 0 in cycles" group.long 0x138++0x03 line.long 0x00 "DENALI_CTL_78,DENALI_CTL_78" hexmask.long.byte 0x00 24.--31. 1. "TMRRI_F1,DRAM TMRRI value for frequency copy 1 in cycles" hexmask.long.byte 0x00 16.--23. 1. "TMRRI_F0,DRAM TMRRI value for frequency copy 0 in cycles" newline hexmask.long.word 0x00 0.--15. 1. "TPDEX_F2,DRAM TPDEX value for frequency copy 2 in cycles" group.long 0x13C++0x03 line.long 0x00 "DENALI_CTL_79,DENALI_CTL_79" bitfld.long 0x00 24.--28. "TCKEHCS_F0,DRAM TCKEHCS value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCKELCS_F0,DRAM TCKELCS value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCSCKE_F0,DRAM TCSCKE value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.byte 0x00 0.--7. 1. "TMRRI_F2,DRAM TMRRI value for frequency copy 2 in cycles" group.long 0x140++0x03 line.long 0x00 "DENALI_CTL_80,DENALI_CTL_80" bitfld.long 0x00 24.--28. "TCSCKE_F1,DRAM TCSCKE value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16. "CA_DEFAULT_VAL_F0,Defines how unused address/command bits are driven for frequency copy 0" "0,1" newline bitfld.long 0x00 8.--11. "TZQCKE_F0,DRAM TZQCKE value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--4. "TMRWCKEL_F0,DRAM TMRWCKEL value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x144++0x03 line.long 0x00 "DENALI_CTL_81,DENALI_CTL_81" bitfld.long 0x00 24.--27. "TZQCKE_F1,DRAM TZQCKE value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--20. "TMRWCKEL_F1,DRAM TMRWCKEL value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKEHCS_F1,DRAM TCKEHCS value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCKELCS_F1,DRAM TCKELCS value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x148++0x03 line.long 0x00 "DENALI_CTL_82,DENALI_CTL_82" bitfld.long 0x00 24.--28. "TCKEHCS_F2,DRAM TCKEHCS value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCKELCS_F2,DRAM TCKELCS value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCSCKE_F2,DRAM TCSCKE value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. "CA_DEFAULT_VAL_F1,Defines how unused address/command bits are driven for frequency copy 1" "0,1" group.long 0x14C++0x03 line.long 0x00 "DENALI_CTL_83,DENALI_CTL_83" bitfld.long 0x00 16. "CA_DEFAULT_VAL_F2,Defines how unused address/command bits are driven for frequency copy 2" "0,1" bitfld.long 0x00 8.--11. "TZQCKE_F2,DRAM TZQCKE value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. "TMRWCKEL_F2,DRAM TMRWCKEL value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x150++0x03 line.long 0x00 "DENALI_CTL_84,DENALI_CTL_84" hexmask.long.word 0x00 16.--31. 1. "TXSNR_F0,DRAM TXSNR value for frequency copy 0 in cycles" hexmask.long.word 0x00 0.--15. 1. "TXSR_F0,DRAM TXSR value for frequency copy 0 in cycles" group.long 0x154++0x03 line.long 0x00 "DENALI_CTL_85,DENALI_CTL_85" hexmask.long.word 0x00 16.--31. 1. "TXSNR_F1,DRAM TXSNR value for frequency copy 1 in cycles" hexmask.long.word 0x00 0.--15. 1. "TXSR_F1,DRAM TXSR value for frequency copy 1 in cycles" group.long 0x158++0x03 line.long 0x00 "DENALI_CTL_86,DENALI_CTL_86" hexmask.long.word 0x00 16.--31. 1. "TXSNR_F2,DRAM TXSNR value for frequency copy 2 in cycles" hexmask.long.word 0x00 0.--15. 1. "TXSR_F2,DRAM TXSR value for frequency copy 2 in cycles" group.long 0x15C++0x03 line.long 0x00 "DENALI_CTL_87,DENALI_CTL_87" hexmask.long.byte 0x00 24.--31. 1. "TSR_F0,DRAM TSR value for frequency copy 0 in cycles" bitfld.long 0x00 16.--20. "TCKCKEL_F0,DRAM TCKCKEL value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKEHCMD_F0,DRAM TCKEHCMD value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCKELCMD_F0,DRAM TCKELCMD value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x160++0x03 line.long 0x00 "DENALI_CTL_88,DENALI_CTL_88" bitfld.long 0x00 24.--28. "TCMDCKE_F0,DRAM TCMDCKE value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCSCKEH_F0,DRAM TCSCKEH value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKELPD_F0,DRAM TCKELPD value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. "TESCKE_F0,DRAM TESCKE value for frequency copy 0 in cycles" "0,1,2,3,4,5,6,7" group.long 0x164++0x03 line.long 0x00 "DENALI_CTL_89,DENALI_CTL_89" hexmask.long.byte 0x00 24.--31. 1. "TSR_F1,DRAM TSR value for frequency copy 1 in cycles" bitfld.long 0x00 16.--20. "TCKCKEL_F1,DRAM TCKCKEL value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKEHCMD_F1,DRAM TCKEHCMD value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCKELCMD_F1,DRAM TCKELCMD value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x168++0x03 line.long 0x00 "DENALI_CTL_90,DENALI_CTL_90" bitfld.long 0x00 24.--28. "TCMDCKE_F1,DRAM TCMDCKE value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCSCKEH_F1,DRAM TCSCKEH value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKELPD_F1,DRAM TCKELPD value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. "TESCKE_F1,DRAM TESCKE value for frequency copy 1 in cycles" "0,1,2,3,4,5,6,7" group.long 0x16C++0x03 line.long 0x00 "DENALI_CTL_91,DENALI_CTL_91" hexmask.long.byte 0x00 24.--31. 1. "TSR_F2,DRAM TSR value for frequency copy 2 in cycles" bitfld.long 0x00 16.--20. "TCKCKEL_F2,DRAM TCKCKEL value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKEHCMD_F2,DRAM TCKEHCMD value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCKELCMD_F2,DRAM TCKELCMD value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x170++0x03 line.long 0x00 "DENALI_CTL_92,DENALI_CTL_92" bitfld.long 0x00 24.--28. "TCMDCKE_F2,DRAM TCMDCKE value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCSCKEH_F2,DRAM TCSCKEH value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "TCKELPD_F2,DRAM TCKELPD value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. "TESCKE_F2,DRAM TESCKE value for frequency copy 2 in cycles" "0,1,2,3,4,5,6,7" group.long 0x174++0x03 line.long 0x00 "DENALI_CTL_93,DENALI_CTL_93" bitfld.long 0x00 24.--26. "CKE_DELAY,Additional cycles to delay CKE for status reporting" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. "ENABLE_QUICK_SREFRESH,Allow user to interrupt memory initialization to enter self-refresh mode" "0,1" newline bitfld.long 0x00 8. "MC_RESERVED8,MC_RESERVED8" "0,1" bitfld.long 0x00 0. "PWRUP_SREFRESH_EXIT,Allow powerup via self-refresh instead of full memory initialization" "0,1" group.long 0x1A8++0x03 line.long 0x00 "DENALI_CTL_106,DENALI_CTL_106" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_F0,TDFI_PHYMSTR_MAX_F0" group.long 0x1AC++0x03 line.long 0x00 "DENALI_CTL_107,DENALI_CTL_107" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE0_F0,Defines the DFI 4" group.long 0x1B0++0x03 line.long 0x00 "DENALI_CTL_108,DENALI_CTL_108" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE1_F0,Defines the DFI 4" group.long 0x1B4++0x03 line.long 0x00 "DENALI_CTL_109,DENALI_CTL_109" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE2_F0,Defines the DFI 4" group.long 0x1B8++0x03 line.long 0x00 "DENALI_CTL_110,DENALI_CTL_110" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE3_F0,Defines the DFI 4" group.long 0x1C0++0x03 line.long 0x00 "DENALI_CTL_112,DENALI_CTL_112" hexmask.long.tbyte 0x00 0.--19. 1. "TDFI_PHYMSTR_RESP_F0,TDFI_PHYMSTR_RESP_F0" group.long 0x1C4++0x03 line.long 0x00 "DENALI_CTL_113,DENALI_CTL_113" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_F1,TDFI_PHYMSTR_MAX_F1" group.long 0x1C8++0x03 line.long 0x00 "DENALI_CTL_114,DENALI_CTL_114" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE0_F1,Defines the DFI 4" group.long 0x1CC++0x03 line.long 0x00 "DENALI_CTL_115,DENALI_CTL_115" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE1_F1,Defines the DFI 4" group.long 0x1D0++0x03 line.long 0x00 "DENALI_CTL_116,DENALI_CTL_116" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE2_F1,Defines the DFI 4" group.long 0x1D4++0x03 line.long 0x00 "DENALI_CTL_117,DENALI_CTL_117" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE3_F1,Defines the DFI 4" group.long 0x1DC++0x03 line.long 0x00 "DENALI_CTL_119,DENALI_CTL_119" hexmask.long.tbyte 0x00 0.--19. 1. "TDFI_PHYMSTR_RESP_F1,TDFI_PHYMSTR_RESP_F1" group.long 0x1E0++0x03 line.long 0x00 "DENALI_CTL_120,DENALI_CTL_120" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_F2,TDFI_PHYMSTR_MAX_F2" group.long 0x1E4++0x03 line.long 0x00 "DENALI_CTL_121,DENALI_CTL_121" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE0_F2,Defines the DFI 4" group.long 0x1E8++0x03 line.long 0x00 "DENALI_CTL_122,DENALI_CTL_122" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE1_F2,Defines the DFI 4" group.long 0x1EC++0x03 line.long 0x00 "DENALI_CTL_123,DENALI_CTL_123" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE2_F2,Defines the DFI 4" group.long 0x1F0++0x03 line.long 0x00 "DENALI_CTL_124,DENALI_CTL_124" hexmask.long 0x00 0.--31. 1. "TDFI_PHYMSTR_MAX_TYPE3_F2,Defines the DFI 4" group.long 0x1F8++0x03 line.long 0x00 "DENALI_CTL_126,DENALI_CTL_126" bitfld.long 0x00 24. "PHYMSTR_NO_AREF,Disables refreshes during the PHY master interface sequence" "0,1" hexmask.long.tbyte 0x00 0.--19. 1. "TDFI_PHYMSTR_RESP_F2,TDFI_PHYMSTR_RESP_F2" group.long 0x2A4++0x03 line.long 0x00 "DENALI_CTL_169,DENALI_CTL_169" hexmask.long.word 0x00 16.--25. 1. "TVRCG_ENABLE_F0,JEDEC TVRCG_ENABLE time" bitfld.long 0x00 0.--1. "MRW_DFS_UPDATE_FRC,Defines the frequency register set to use when doing a software MRW with WRITE_MODEREG bit (26)" "0,1,2,3" group.long 0x2A8++0x03 line.long 0x00 "DENALI_CTL_170,DENALI_CTL_170" hexmask.long.word 0x00 16.--25. 1. "TFC_F0,JEDEC TFC the frequency set point switching time" hexmask.long.word 0x00 0.--9. 1. "TVRCG_DISABLE_F0,JEDEC TVRCG_DISABLE time" group.long 0x2AC++0x03 line.long 0x00 "DENALI_CTL_171,DENALI_CTL_171" bitfld.long 0x00 8.--12. "TCKFSPX_F0,JEDEC TCKFSPX the valid clock requirement before 1st valid command after FSP change" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TCKFSPE_F0,JEDEC TCKFSPE the valid clock requirement after entering SDP change" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2B0++0x03 line.long 0x00 "DENALI_CTL_172,DENALI_CTL_172" hexmask.long.tbyte 0x00 0.--19. 1. "TVREF_LONG_F0,JEDEC TVREF design will always use the long value" group.long 0x2B4++0x03 line.long 0x00 "DENALI_CTL_173,DENALI_CTL_173" hexmask.long.word 0x00 16.--25. 1. "TVRCG_DISABLE_F1,JEDEC TVRCG_DISABLE time" hexmask.long.word 0x00 0.--9. 1. "TVRCG_ENABLE_F1,JEDEC TVRCG_ENABLE time" group.long 0x2B8++0x03 line.long 0x00 "DENALI_CTL_174,DENALI_CTL_174" bitfld.long 0x00 24.--28. "TCKFSPX_F1,JEDEC TCKFSPX the valid clock requirement before 1st valid command after FSP change" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCKFSPE_F1,JEDEC TCKFSPE the valid clock requirement after entering SDP change" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--9. 1. "TFC_F1,JEDEC TFC the frequency set point switching time" group.long 0x2BC++0x03 line.long 0x00 "DENALI_CTL_175,DENALI_CTL_175" hexmask.long.tbyte 0x00 0.--19. 1. "TVREF_LONG_F1,JEDEC TVREF design will always use the long value" group.long 0x2C0++0x03 line.long 0x00 "DENALI_CTL_176,DENALI_CTL_176" hexmask.long.word 0x00 16.--25. 1. "TVRCG_DISABLE_F2,JEDEC TVRCG_DISABLE time" hexmask.long.word 0x00 0.--9. 1. "TVRCG_ENABLE_F2,JEDEC TVRCG_ENABLE time" group.long 0x2C4++0x03 line.long 0x00 "DENALI_CTL_177,DENALI_CTL_177" bitfld.long 0x00 24.--28. "TCKFSPX_F2,JEDEC TCKFSPX the valid clock requirement before 1st valid command after FSP change" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "TCKFSPE_F2,JEDEC TCKFSPE the valid clock requirement after entering SDP change" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--9. 1. "TFC_F2,JEDEC TFC the frequency set point switching time" group.long 0x2C8++0x03 line.long 0x00 "DENALI_CTL_178,DENALI_CTL_178" hexmask.long.tbyte 0x00 0.--19. 1. "TVREF_LONG_F2,JEDEC TVREF design will always use the long value" group.long 0x2D8++0x03 line.long 0x00 "DENALI_CTL_182,DENALI_CTL_182" hexmask.long.byte 0x00 24.--31. 1. "MR2_DATA_F1_0,Data to program into memory mode register 2 for chip select 0 for frequency copy 1" hexmask.long.byte 0x00 16.--23. 1. "MR1_DATA_F1_0,Data to program into memory mode register 1 for chip select 0 for frequency copy 1" newline hexmask.long.byte 0x00 8.--15. 1. "MR2_DATA_F0_0,Data to program into memory mode register 2 for chip select 0 for frequency copy 0" hexmask.long.byte 0x00 0.--7. 1. "MR1_DATA_F0_0,Data to program into memory mode register 1 for chip select 0 for frequency copy 0" group.long 0x2DC++0x03 line.long 0x00 "DENALI_CTL_183,DENALI_CTL_183" hexmask.long.byte 0x00 24.--31. 1. "MR3_DATA_F0_0,Data to program into memory mode register 3 for chip select 0 for frequency copy 0" hexmask.long.byte 0x00 16.--23. 1. "MRSINGLE_DATA_0,Data to program into memory mode register single write to chip select 0" newline hexmask.long.byte 0x00 8.--15. 1. "MR2_DATA_F2_0,Data to program into memory mode register 2 for chip select 0 for frequency copy 2" hexmask.long.byte 0x00 0.--7. 1. "MR1_DATA_F2_0,Data to program into memory mode register 1 for chip select 0 for frequency copy 2" group.long 0x2E0++0x03 line.long 0x00 "DENALI_CTL_184,DENALI_CTL_184" hexmask.long.byte 0x00 24.--31. 1. "MR4_DATA_F1_0,Data to program into memory mode register 4 for chip select 0 for frequency copy 1" hexmask.long.byte 0x00 16.--23. 1. "MR4_DATA_F0_0,Data to program into memory mode register 4 for chip select 0 for frequency copy 0" newline hexmask.long.byte 0x00 8.--15. 1. "MR3_DATA_F2_0,Data to program into memory mode register 3 for chip select 0 for frequency copy 2" hexmask.long.byte 0x00 0.--7. 1. "MR3_DATA_F1_0,Data to program into memory mode register 3 for chip select 0 for frequency copy 1" group.long 0x2E4++0x03 line.long 0x00 "DENALI_CTL_185,DENALI_CTL_185" hexmask.long.byte 0x00 24.--31. 1. "MR11_DATA_F1_0,Data to program into memory mode register 11 for chip select 0 for frequency copy 1" hexmask.long.byte 0x00 16.--23. 1. "MR11_DATA_F0_0,Data to program into memory mode register 11 for chip select 0 for frequency copy 0" newline hexmask.long.byte 0x00 8.--15. 1. "MR8_DATA_0,Data read from MR8 for chip select 0" hexmask.long.byte 0x00 0.--7. 1. "MR4_DATA_F2_0,Data to program into memory mode register 4 for chip select 0 for frequency copy 2" group.long 0x2E8++0x03 line.long 0x00 "DENALI_CTL_186,DENALI_CTL_186" hexmask.long.byte 0x00 24.--31. 1. "MR12_DATA_F2_0,Data to program into memory mode register 12 for chip select 0" hexmask.long.byte 0x00 16.--23. 1. "MR12_DATA_F1_0,Data to program into memory mode register 12 for chip select 0" newline hexmask.long.byte 0x00 8.--15. 1. "MR12_DATA_F0_0,Data to program into memory mode register 12 for chip select 0" hexmask.long.byte 0x00 0.--7. 1. "MR11_DATA_F2_0,Data to program into memory mode register 11 for chip select 0 for frequency copy 2" group.long 0x2F4++0x03 line.long 0x00 "DENALI_CTL_189,DENALI_CTL_189" hexmask.long.byte 0x00 24.--31. 1. "MR2_DATA_F0_1,Data to program into memory mode register 2 for chip select 1 for frequency copy 0" hexmask.long.byte 0x00 16.--23. 1. "MR1_DATA_F0_1,Data to program into memory mode register 1 for chip select 1 for frequency copy 0" newline hexmask.long.byte 0x00 8.--15. 1. "MR22_DATA_F2_0,Data to program into memory mode register 22 for chip select 0" hexmask.long.byte 0x00 0.--7. 1. "MR22_DATA_F1_0,Data to program into memory mode register 22 for chip select 0" group.long 0x2F8++0x03 line.long 0x00 "DENALI_CTL_190,DENALI_CTL_190" hexmask.long.byte 0x00 24.--31. 1. "MR2_DATA_F2_1,Data to program into memory mode register 2 for chip select 1 for frequency copy 2" hexmask.long.byte 0x00 16.--23. 1. "MR1_DATA_F2_1,Data to program into memory mode register 1 for chip select 1 for frequency copy 2" newline hexmask.long.byte 0x00 8.--15. 1. "MR2_DATA_F1_1,Data to program into memory mode register 2 for chip select 1 for frequency copy 1" hexmask.long.byte 0x00 0.--7. 1. "MR1_DATA_F1_1,Data to program into memory mode register 1 for chip select 1 for frequency copy 1" group.long 0x2FC++0x03 line.long 0x00 "DENALI_CTL_191,DENALI_CTL_191" hexmask.long.byte 0x00 24.--31. 1. "MR3_DATA_F2_1,Data to program into memory mode register 3 for chip select 1 for frequency copy 2" hexmask.long.byte 0x00 16.--23. 1. "MR3_DATA_F1_1,Data to program into memory mode register 3 for chip select 1 for frequency copy 1" newline hexmask.long.byte 0x00 8.--15. 1. "MR3_DATA_F0_1,Data to program into memory mode register 3 for chip select 1 for frequency copy 0" hexmask.long.byte 0x00 0.--7. 1. "MRSINGLE_DATA_1,Data to program into memory mode register single write to chip select 1" group.long 0x300++0x03 line.long 0x00 "DENALI_CTL_192,DENALI_CTL_192" hexmask.long.byte 0x00 24.--31. 1. "MR8_DATA_1,Data read from MR8 for chip select 1" hexmask.long.byte 0x00 16.--23. 1. "MR4_DATA_F2_1,Data to program into memory mode register 4 for chip select 1 for frequency copy 2" newline hexmask.long.byte 0x00 8.--15. 1. "MR4_DATA_F1_1,Data to program into memory mode register 4 for chip select 1 for frequency copy 1" hexmask.long.byte 0x00 0.--7. 1. "MR4_DATA_F0_1,Data to program into memory mode register 4 for chip select 1 for frequency copy 0" group.long 0x304++0x03 line.long 0x00 "DENALI_CTL_193,DENALI_CTL_193" hexmask.long.byte 0x00 24.--31. 1. "MR12_DATA_F0_1,Data to program into memory mode register 12 for chip select 1" hexmask.long.byte 0x00 16.--23. 1. "MR11_DATA_F2_1,Data to program into memory mode register 11 for chip select 1 for frequency copy 2" newline hexmask.long.byte 0x00 8.--15. 1. "MR11_DATA_F1_1,Data to program into memory mode register 11 for chip select 1 for frequency copy 1" hexmask.long.byte 0x00 0.--7. 1. "MR11_DATA_F0_1,Data to program into memory mode register 11 for chip select 1 for frequency copy 0" group.long 0x308++0x03 line.long 0x00 "DENALI_CTL_194,DENALI_CTL_194" hexmask.long.byte 0x00 24.--31. 1. "MR14_DATA_F0_1,Data to program into memory mode register 14 for chip select 1" hexmask.long.byte 0x00 16.--23. 1. "MR13_DATA_1,Data to program into memory mode register 13 for chip select 1" newline hexmask.long.byte 0x00 8.--15. 1. "MR12_DATA_F2_1,Data to program into memory mode register 12 for chip select 1" hexmask.long.byte 0x00 0.--7. 1. "MR12_DATA_F1_1,Data to program into memory mode register 12 for chip select 1" group.long 0x30C++0x03 line.long 0x00 "DENALI_CTL_195,DENALI_CTL_195" hexmask.long.byte 0x00 24.--31. 1. "MR17_DATA_1,Data to program into memory mode register 17 for chip select 1" hexmask.long.byte 0x00 16.--23. 1. "MR16_DATA_1,Data to program into memory mode register 16 for chip select 1" newline hexmask.long.byte 0x00 8.--15. 1. "MR14_DATA_F2_1,Data to program into memory mode register 14 for chip select 1" hexmask.long.byte 0x00 0.--7. 1. "MR14_DATA_F1_1,Data to program into memory mode register 14 for chip select 1" group.long 0x310++0x03 line.long 0x00 "DENALI_CTL_196,DENALI_CTL_196" hexmask.long.byte 0x00 24.--31. 1. "MR22_DATA_F2_1,Data to program into memory mode register 22 for chip select 1" hexmask.long.byte 0x00 16.--23. 1. "MR22_DATA_F1_1,Data to program into memory mode register 22 for chip select 1" newline hexmask.long.byte 0x00 8.--15. 1. "MR22_DATA_F0_1,Data to program into memory mode register 22 for chip select 1" hexmask.long.byte 0x00 0.--7. 1. "MR20_DATA_1,Data read from MR20 for chip select 1" group.long 0x314++0x03 line.long 0x00 "DENALI_CTL_197,DENALI_CTL_197" bitfld.long 0x00 24. "MR_FSP_DATA_VALID_F2,Indicates that at this frequency memory was trained and the associated data has been loaded into the MRx_DATA parameter(s)" "0,1" bitfld.long 0x00 16. "MR_FSP_DATA_VALID_F1,Indicates that at this frequency memory was trained and the associated data has been loaded into the MRx_DATA parameter(s)" "0,1" newline bitfld.long 0x00 8. "MR_FSP_DATA_VALID_F0,Indicates that at this frequency memory was trained and the associated data has been loaded into the MRx_DATA parameter(s)" "0,1" hexmask.long.byte 0x00 0.--7. 1. "MR23_DATA,Data to program into memory mode register 23" group.long 0x318++0x03 line.long 0x00 "DENALI_CTL_198,DENALI_CTL_198" bitfld.long 0x00 24. "FSP_PHY_UPDATE_MRW,Identifies the logic responsible for updating MR12 and MR14 in memory" "0,1" rbitfld.long 0x00 16. "MC_RESERVED18,MC_RESERVED18" "0,1" newline rbitfld.long 0x00 8. "MC_RESERVED17,MC_RESERVED17" "0,1" rbitfld.long 0x00 0.--1. "RL3_SUPPORT_EN,Indicates if RL3 is supported by a connected LPDDR3 memory" "0,1,2,3" group.long 0x31C++0x03 line.long 0x00 "DENALI_CTL_199,DENALI_CTL_199" bitfld.long 0x00 24. "FSP_WR_CURRENT,Reports which FSP set the memory will target with write commands" "0,1" bitfld.long 0x00 16. "FSP_OP_CURRENT,Reports which FSP set the memory is currently using" "0,1" newline bitfld.long 0x00 8. "FSP_STATUS,Indicates that a DFS event caused the FSP mode registers to be updated" "0,1" bitfld.long 0x00 0. "DFS_ALWAYS_WRITE_FSP,Forces all FSP mode registers to be written by the controller during a DFS event" "0,1" group.long 0x398++0x03 line.long 0x00 "DENALI_CTL_230,DENALI_CTL_230" hexmask.long.word 0x00 16.--27. 1. "TZQCAL_F0,Holds the DRAM ZQCAL value for frequency copy 0 in cycles" hexmask.long.word 0x00 0.--11. 1. "ZQCS_F0,Number of cycles needed for a ZQCS command for frequency copy 0" group.long 0x39C++0x03 line.long 0x00 "DENALI_CTL_231,DENALI_CTL_231" hexmask.long.word 0x00 8.--19. 1. "ZQINIT_F1,Number of cycles needed for a ZQINIT command for frequency copy 1" hexmask.long.byte 0x00 0.--6. 1. "TZQLAT_F0,Holds the DRAM ZQLAT value for frequency copy 0 in cycles" group.long 0x3A0++0x03 line.long 0x00 "DENALI_CTL_232,DENALI_CTL_232" hexmask.long.word 0x00 16.--27. 1. "ZQCS_F1,Number of cycles needed for a ZQCS command for frequency copy 1" hexmask.long.word 0x00 0.--11. 1. "ZQCL_F1,Number of cycles needed for a ZQCL command for frequency copy 1" group.long 0x3A4++0x03 line.long 0x00 "DENALI_CTL_233,DENALI_CTL_233" hexmask.long.byte 0x00 16.--22. 1. "TZQLAT_F1,Holds the DRAM ZQLAT value for frequency copy 1 in cycles" hexmask.long.word 0x00 0.--11. 1. "TZQCAL_F1,Holds the DRAM ZQCAL value for frequency copy 1 in cycles" group.long 0x3A8++0x03 line.long 0x00 "DENALI_CTL_234,DENALI_CTL_234" hexmask.long.word 0x00 16.--27. 1. "ZQCL_F2,Number of cycles needed for a ZQCL command for frequency copy 2" hexmask.long.word 0x00 0.--11. 1. "ZQINIT_F2,Number of cycles needed for a ZQINIT command for frequency copy 2" group.long 0x3AC++0x03 line.long 0x00 "DENALI_CTL_235,DENALI_CTL_235" hexmask.long.word 0x00 16.--27. 1. "TZQCAL_F2,Holds the DRAM ZQCAL value for frequency copy 2 in cycles" hexmask.long.word 0x00 0.--11. 1. "ZQCS_F2,Number of cycles needed for a ZQCS command for frequency copy 2" group.long 0x3B0++0x03 line.long 0x00 "DENALI_CTL_236,DENALI_CTL_236" rbitfld.long 0x00 24. "ZQ_REQ_PENDING,Indicates that a ZQ command is currently in progress or waiting to run" "0,1" bitfld.long 0x00 16.--19. "ZQ_REQ,User request to initiate a ZQ calibration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--9. "ZQ_SW_REQ_START_LATCH_MAP,Specifies which chip selects will simultaneously receive a ZQ start or latch command once the ZQ_REQ parameter is written with a ZQ Start or ZQ Latch command" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. "TZQLAT_F2,Holds the DRAM ZQLAT value for frequency copy 2 in cycles" group.long 0x3B4++0x03 line.long 0x00 "DENALI_CTL_237,DENALI_CTL_237" hexmask.long.word 0x00 16.--27. 1. "ZQRESET_F1,Number of cycles needed for a ZQRESET command for frequency copy 1" hexmask.long.word 0x00 0.--11. 1. "ZQRESET_F0,Number of cycles needed for a ZQRESET command for frequency copy 0" group.long 0x3B8++0x03 line.long 0x00 "DENALI_CTL_238,DENALI_CTL_238" bitfld.long 0x00 24. "ZQCS_ROTATE,For non-LPDDR4 memories selects whether a ZQCS command will calibrate just one chip select or all chip selects" "0,1" bitfld.long 0x00 16. "NO_ZQ_INIT,Disable ZQ operations during initialization" "0,1" newline hexmask.long.word 0x00 0.--11. 1. "ZQRESET_F2,Number of cycles needed for a ZQRESET command for frequency copy 2" group.long 0x3D4++0x03 line.long 0x00 "DENALI_CTL_245,DENALI_CTL_245" bitfld.long 0x00 24.--28. "BANK_START_BIT,Defines the LSbit of the bank address within the page of the user address when the BANK_ADDR_INTLV_EN parameter is set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16. "CS_LOWER_ADDR_EN,Enables moving the CS field to lower in the address map" "0,1" group.long 0x3D8++0x03 line.long 0x00 "DENALI_CTL_246,DENALI_CTL_246" hexmask.long.byte 0x00 24.--31. 1. "COMMAND_AGE_COUNT,Initial value of individual command aging counters for command aging" hexmask.long.byte 0x00 16.--23. 1. "AGE_COUNT,Initial value of master aging-rate counter for command aging" newline bitfld.long 0x00 8.--12. "APREBIT,Location of the auto pre-charge bit in the DRAM address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. "BANK_ADDR_INTLV_EN,Enables the capability to interleave the bank address within the row address bits" "0,1" group.long 0x3DC++0x03 line.long 0x00 "DENALI_CTL_247,DENALI_CTL_247" bitfld.long 0x00 24. "PLACEMENT_EN,Enable placement logic for command queue" "0,1" bitfld.long 0x00 16. "BANK_SPLIT_EN,Enable bank splitting as a rule for command queue placement" "0,1" newline bitfld.long 0x00 8. "ADDR_COLLISION_MPM_DIS,Disable address collision detection extension using micro page mask for command queue placement and selection" "0,1" bitfld.long 0x00 0. "ADDR_CMP_EN,Enable address collision detection as a rule for command queue placement" "0,1" group.long 0x3E0++0x03 line.long 0x00 "DENALI_CTL_248,DENALI_CTL_248" bitfld.long 0x00 24. "CS_SAME_EN,Enable chip select grouping when read/write grouping as a rule for command queue placement" "0,1" bitfld.long 0x00 16. "RW_SAME_PAGE_EN,Enable page grouping when read/write grouping as a rule for command queue placement" "0,1" newline bitfld.long 0x00 8. "RW_SAME_EN,Enable read/write grouping as a rule for command queue placement" "0,1" bitfld.long 0x00 0. "PRIORITY_EN,Enable priority as a rule for command queue placement" "0,1" group.long 0x3E4++0x03 line.long 0x00 "DENALI_CTL_249,DENALI_CTL_249" bitfld.long 0x00 24. "SWAP_EN,Enable command swapping logic in execution unit" "0,1" bitfld.long 0x00 16.--19. "NUM_Q_ENTRIES_ACT_DISABLE,Number of queue entries in which ACT requests will be disabled" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--9. "DISABLE_RW_GROUP_W_BNK_CONFLICT,Disables placement to read/write group when grouping creates a bank collision" "0,1,2,3" bitfld.long 0x00 0. "W2R_SPLIT_EN,Enable splitting of commands to the same chip select from a write to a read command as a rule for command queue placement" "0,1" group.long 0x3E8++0x03 line.long 0x00 "DENALI_CTL_250,DENALI_CTL_250" bitfld.long 0x00 24. "REDUC,Enable the half datapath feature of the controller" "0,1" bitfld.long 0x00 16.--17. "CS_MAP,Defines which chip selects are active" "0,1,2,3" newline bitfld.long 0x00 8.--9. "INHIBIT_DRAM_CMD,Inhibit command types from being executed from the command queue" "0,1,2,3" bitfld.long 0x00 0. "DISABLE_RD_INTERLEAVE,Disable read data interleaving for commands from the same port regardless of the requestor ID" "0,1" group.long 0x3EC++0x03 line.long 0x00 "DENALI_CTL_251,DENALI_CTL_251" bitfld.long 0x00 24.--27. "DEVICE1_BYTE0_CS0,Defines the byte location of byte0 in the memory datapath for device 1 on chip 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "DEVICE0_BYTE0_CS0,Defines the byte location of byte0 in the memory datapath for device 0 on chip 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--10. "MEMDATA_RATIO_0,Defines the ratio of the DRAM device size on chip select 0 to the memory data width" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "LPDDR2_S4,Defines the DRAM LPDDR2 device type being used" "0,1" group.long 0x3F0++0x03 line.long 0x00 "DENALI_CTL_252,DENALI_CTL_252" bitfld.long 0x00 24.--27. "DEVICE0_BYTE0_CS1,Defines the byte location of byte0 in the memory datapath for device 0 on chip 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--18. "MEMDATA_RATIO_1,Defines the ratio of the DRAM device size on chip select 1 to the memory data width" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--11. "DEVICE3_BYTE0_CS0,Defines the byte location of byte0 in the memory datapath for device 3 on chip 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "DEVICE2_BYTE0_CS0,Defines the byte location of byte0 in the memory datapath for device 2 on chip 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3F4++0x03 line.long 0x00 "DENALI_CTL_253,DENALI_CTL_253" bitfld.long 0x00 24.--27. "Q_FULLNESS,Quantity that determines when the command queue almost full signal will assert (q_almost_full)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "DEVICE3_BYTE0_CS1,Defines the byte location of byte0 in the memory datapath for device 3 on chip 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "DEVICE2_BYTE0_CS1,Defines the byte location of byte0 in the memory datapath for device 2 on chip 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "DEVICE1_BYTE0_CS1,Defines the byte location of byte0 in the memory datapath for device 1 on chip 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3F8++0x03 line.long 0x00 "DENALI_CTL_254,DENALI_CTL_254" bitfld.long 0x00 24. "CTRLUPD_REQ,Assert the DFI controller-initiated update request signal dfi_ctrlupd_req" "0,1" rbitfld.long 0x00 16. "CONTROLLER_BUSY,Indicator that the controller is processing a command" "0,1" newline bitfld.long 0x00 8.--9. "WR_ORDER_REQ,Determines if the controller can re-order write commands from the same source ID and/or the same port" "0,1,2,3" bitfld.long 0x00 0. "IN_ORDER_ACCEPT,Forces the controller to accept commands in the order in which they are placed in the command queue" "0,1" group.long 0x3FC++0x03 line.long 0x00 "DENALI_CTL_255,DENALI_CTL_255" bitfld.long 0x00 24.--25. "PREAMBLE_SUPPORT_F1,Selects the preamble for read and write burst transfers for frequency copy 1" "0,1,2,3" bitfld.long 0x00 16.--17. "PREAMBLE_SUPPORT_F0,Selects the preamble for read and write burst transfers for frequency copy 0" "0,1,2,3" newline bitfld.long 0x00 8. "CTRLUPD_AREF_HP_ENABLE,Enable an automatic controller-initiated update (dfi_ctrlupd_req) after every high priority refresh when executing as a subtask request" "0,1" bitfld.long 0x00 0. "CTRLUPD_REQ_PER_AREF_EN,Enable an automatic controller-initiated update (dfi_ctrlupd_req) after every refresh" "0,1" group.long 0x400++0x03 line.long 0x00 "DENALI_CTL_256,DENALI_CTL_256" bitfld.long 0x00 24. "RD_DBI_EN,Enables controller support of DRAM DBI feature for read data with DDR4 devices" "0,1" bitfld.long 0x00 16. "WR_DBI_EN,Enables controller support of DRAM DBI feature for write data with DDR4 devices" "0,1" newline bitfld.long 0x00 8. "RD_PREAMBLE_TRAINING_EN,Enable read preamble training during gate training" "0,1" bitfld.long 0x00 0.--1. "PREAMBLE_SUPPORT_F2,Selects the preamble for read and write burst transfers for frequency copy 2" "0,1,2,3" rgroup.long 0x404++0x03 line.long 0x00 "DENALI_CTL_257,DENALI_CTL_257" hexmask.long.tbyte 0x00 8.--27. 1. "DFI_ERROR_INFO,Holds the encoded DFI error type associated with the DFI_ERROR parameter assertion" bitfld.long 0x00 0.--4. "DFI_ERROR,Indicates that the DFI error flag has been asserted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4A4++0x03 line.long 0x00 "DENALI_CTL_297,DENALI_CTL_297" bitfld.long 0x00 24.--25. "ODT_WR_MAP_CS1,Determines which chip(s) will have termination when a write occurs on chip select 1" "0,1,2,3" bitfld.long 0x00 16.--17. "ODT_RD_MAP_CS1,Determines which chip(s) will have termination when a read occurs on chip select 1" "0,1,2,3" newline bitfld.long 0x00 8.--9. "ODT_WR_MAP_CS0,Determines which chip(s) will have termination when a write occurs on chip select 0" "0,1,2,3" bitfld.long 0x00 0.--1. "ODT_RD_MAP_CS0,Determines which chip(s) will have termination when a read occurs on chip select 0" "0,1,2,3" group.long 0x4A8++0x03 line.long 0x00 "DENALI_CTL_298,DENALI_CTL_298" hexmask.long.byte 0x00 24.--31. 1. "TODTL_2CMD_F1,Defines the DRAM delay from an ODT de-assertion to the next non-write non-read command" bitfld.long 0x00 16.--19. "TODTH_RD_F0,Defines the DRAM minimum ODT high time after an ODT assertion for a read command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TODTH_WR_F0,Defines the DRAM minimum ODT high time after an ODT assertion for a write command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "TODTL_2CMD_F0,Defines the DRAM delay from an ODT de-assertion to the next non-write non-read command" group.long 0x4AC++0x03 line.long 0x00 "DENALI_CTL_299,DENALI_CTL_299" bitfld.long 0x00 24.--27. "TODTH_WR_F2,Defines the DRAM minimum ODT high time after an ODT assertion for a write command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 16.--23. 1. "TODTL_2CMD_F2,Defines the DRAM delay from an ODT de-assertion to the next non-write non-read command" newline bitfld.long 0x00 8.--11. "TODTH_RD_F1,Defines the DRAM minimum ODT high time after an ODT assertion for a read command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "TODTH_WR_F1,Defines the DRAM minimum ODT high time after an ODT assertion for a write command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4B0++0x03 line.long 0x00 "DENALI_CTL_300,DENALI_CTL_300" bitfld.long 0x00 24. "ODT_EN_F2,Enable support of DRAM ODT at F2" "0,1" bitfld.long 0x00 16. "ODT_EN_F1,Enable support of DRAM ODT at F1" "0,1" newline bitfld.long 0x00 8. "ODT_EN_F0,Enable support of DRAM ODT at F0" "0,1" bitfld.long 0x00 0.--3. "TODTH_RD_F2,Defines the DRAM minimum ODT high time after an ODT assertion for a read command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4B4++0x03 line.long 0x00 "DENALI_CTL_301,DENALI_CTL_301" bitfld.long 0x00 24.--29. "WR_TO_ODTH_F2,Defines the delay from a write command to ODT assertion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--21. "WR_TO_ODTH_F1,Defines the delay from a write command to ODT assertion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--13. "WR_TO_ODTH_F0,Defines the delay from a write command to ODT assertion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0. "EN_ODT_ASSERT_EXCEPT_RD,Enable controller to assert ODT at all times except during reads" "0,1" group.long 0x4B8++0x03 line.long 0x00 "DENALI_CTL_302,DENALI_CTL_302" bitfld.long 0x00 24.--28. "RW2MRW_DLY_F0,Additional delay to insert between read or write and mode_reg_" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--21. "RD_TO_ODTH_F2,Defines the delay from a read command to ODT assertion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--13. "RD_TO_ODTH_F1,Defines the delay from a read command to ODT assertion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "RD_TO_ODTH_F0,Defines the delay from a read command to ODT assertion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x4BC++0x03 line.long 0x00 "DENALI_CTL_303,DENALI_CTL_303" bitfld.long 0x00 24.--28. "R2W_DIFFCS_DLY_F0,Additional delay to insert between reads and writes to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "R2R_DIFFCS_DLY_F0,Additional delay to insert between reads to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "RW2MRW_DLY_F2,Additional delay to insert between read or write and mode_reg_" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "RW2MRW_DLY_F1,Additional delay to insert between read or write and mode_reg_" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4C0++0x03 line.long 0x00 "DENALI_CTL_304,DENALI_CTL_304" bitfld.long 0x00 24.--28. "R2W_DIFFCS_DLY_F1,Additional delay to insert between reads and writes to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "R2R_DIFFCS_DLY_F1,Additional delay to insert between reads to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "W2W_DIFFCS_DLY_F0,Additional delay to insert between writes to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "W2R_DIFFCS_DLY_F0,Additional delay to insert between writes and reads to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4C4++0x03 line.long 0x00 "DENALI_CTL_305,DENALI_CTL_305" bitfld.long 0x00 24.--28. "R2W_DIFFCS_DLY_F2,Additional delay to insert between reads and writes to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "R2R_DIFFCS_DLY_F2,Additional delay to insert between reads to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "W2W_DIFFCS_DLY_F1,Additional delay to insert between writes to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "W2R_DIFFCS_DLY_F1,Additional delay to insert between writes and reads to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4C8++0x03 line.long 0x00 "DENALI_CTL_306,DENALI_CTL_306" bitfld.long 0x00 24.--28. "R2W_SAMECS_DLY_F0,Additional delay to insert between reads and writes to the same chip select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "R2R_SAMECS_DLY,Additional delay to insert between two reads to the same chip select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "W2W_DIFFCS_DLY_F2,Additional delay to insert between writes to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "W2R_DIFFCS_DLY_F2,Additional delay to insert between writes and reads to different chip selects" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4CC++0x03 line.long 0x00 "DENALI_CTL_307,DENALI_CTL_307" bitfld.long 0x00 24.--28. "W2W_SAMECS_DLY,Additional delay to insert between two writes to the same chip select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W2R_SAMECS_DLY,Additional delay to insert between writes and reads to the same chip select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "R2W_SAMECS_DLY_F2,Additional delay to insert between reads and writes to the same chip select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "R2W_SAMECS_DLY_F1,Additional delay to insert between reads and writes to the same chip select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4D0++0x03 line.long 0x00 "DENALI_CTL_308,DENALI_CTL_308" bitfld.long 0x00 24.--26. "TDQSCK_MIN_F1,Additional delay needed for tDQSCK" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--19. "TDQSCK_MAX_F1,Additional delay needed for tDQSCK" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--10. "TDQSCK_MIN_F0,Additional delay needed for tDQSCK" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--3. "TDQSCK_MAX_F0,Additional delay needed for tDQSCK" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4D4++0x03 line.long 0x00 "DENALI_CTL_309,DENALI_CTL_309" bitfld.long 0x00 24. "AXI0_FIXED_PORT_PRIORITY_ENABLE,Defines the priority control for AXI port 0 as per-port or per-command" "0,1" bitfld.long 0x00 16. "AXI0_ALL_STROBES_USED_ENABLE,Enables use of the AWALLSTRB signal for AXI port 0" "0,1" newline bitfld.long 0x00 8.--10. "TDQSCK_MIN_F2,Additional delay needed for tDQSCK" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--3. "TDQSCK_MAX_F2,Additional delay needed for tDQSCK" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8FC++0x03 line.long 0x00 "DENALI_CTL_575,DENALI_CTL_575" hexmask.long.byte 0x00 24.--30. 1. "TDFI_PHY_RDLAT_F1,Defines the DFI tPHY_RDLAT timing parameter (in DFI PHY clocks) the maximum cycles between a dfi_rddata_en assertion and a dfi_rddata_valid assertion" hexmask.long.byte 0x00 16.--22. 1. "TDFI_PHY_RDLAT_F0,Defines the DFI tPHY_RDLAT timing parameter (in DFI PHY clocks) the maximum cycles between a dfi_rddata_en assertion and a dfi_rddata_valid assertion" newline hexmask.long.byte 0x00 8.--14. 1. "UPDATE_ERROR_STATUS,Identifies the source of any DFI MC-initiated or PHY-initiated update errors" hexmask.long.byte 0x00 0.--6. 1. "TDFI_PHY_WRLAT,Holds the calculated DFI tPHY_WRLAT timing parameter (in DFI PHY clocks) the maximum cycles between a write command and a dfi_wrdata_en assertion" group.long 0x900++0x03 line.long 0x00 "DENALI_CTL_576,DENALI_CTL_576" bitfld.long 0x00 16.--17. "DRAM_CLK_DISABLE,Set value for the dfi_dram_clk_disable signal" "0,1,2,3" hexmask.long.byte 0x00 8.--14. 1. "TDFI_RDDATA_EN,Holds the calculated DFI tRDDATA_EN timing parameter (in DFI PHY clocks) the maximum cycles between a read command and a dfi_rddata_en assertion" newline hexmask.long.byte 0x00 0.--6. 1. "TDFI_PHY_RDLAT_F2,Defines the DFI tPHY_RDLAT timing parameter (in DFI PHY clocks) the maximum cycles between a dfi_rddata_en assertion and a dfi_rddata_valid assertion" group.long 0x904++0x03 line.long 0x00 "DENALI_CTL_577,DENALI_CTL_577" hexmask.long.word 0x00 0.--15. 1. "TDFI_CTRLUPD_MIN,Defines the DFI tCTRLUPD_MIN timing parameter (in DFI clocks) the minimum cycles that dfi_ctrlupd_req must be asserted" group.long 0x908++0x03 line.long 0x00 "DENALI_CTL_578,DENALI_CTL_578" hexmask.long.tbyte 0x00 0.--20. 1. "TDFI_CTRLUPD_MAX_F0,Defines the DFI tCTRLUPD_MAX timing parameter (in DFI clocks) the maximum cycles that dfi_ctrlupd_req can be asserted" group.long 0x91C++0x03 line.long 0x00 "DENALI_CTL_583,DENALI_CTL_583" hexmask.long.tbyte 0x00 0.--22. 1. "TDFI_PHYUPD_RESP_F0,Defines the DFI tPHYUPD_RESP timing parameter (in DFI clocks) the maximum cycles between a dfi_phyupd_req assertion and a dfi_phyupd_ack assertion" group.long 0x920++0x03 line.long 0x00 "DENALI_CTL_584,DENALI_CTL_584" hexmask.long 0x00 0.--31. 1. "TDFI_CTRLUPD_INTERVAL_F0,Defines the DFI tCTRLUPD_INTERVAL timing parameter (in DFI clocks) the maximum cycles between dfi_ctrlupd_req assertions" group.long 0x924++0x03 line.long 0x00 "DENALI_CTL_585,DENALI_CTL_585" hexmask.long.byte 0x00 8.--14. 1. "WRLAT_ADJ_F0,Adjustment value for PHY write timing" hexmask.long.byte 0x00 0.--6. 1. "RDLAT_ADJ_F0,Adjustment value for PHY read timing" group.long 0x928++0x03 line.long 0x00 "DENALI_CTL_586,DENALI_CTL_586" hexmask.long.tbyte 0x00 0.--20. 1. "TDFI_CTRLUPD_MAX_F1,Defines the DFI tCTRLUPD_MAX timing parameter (in DFI clocks) the maximum cycles that dfi_ctrlupd_req can be asserted" group.long 0x93C++0x03 line.long 0x00 "DENALI_CTL_591,DENALI_CTL_591" hexmask.long.tbyte 0x00 0.--22. 1. "TDFI_PHYUPD_RESP_F1,Defines the DFI tPHYUPD_RESP timing parameter (in DFI clocks) the maximum cycles between a dfi_phyupd_req assertion and a dfi_phyupd_ack assertion" group.long 0x940++0x03 line.long 0x00 "DENALI_CTL_592,DENALI_CTL_592" hexmask.long 0x00 0.--31. 1. "TDFI_CTRLUPD_INTERVAL_F1,Defines the DFI tCTRLUPD_INTERVAL timing parameter (in DFI clocks) the maximum cycles between dfi_ctrlupd_req assertions" group.long 0x944++0x03 line.long 0x00 "DENALI_CTL_593,DENALI_CTL_593" hexmask.long.byte 0x00 8.--14. 1. "WRLAT_ADJ_F1,Adjustment value for PHY write timing" hexmask.long.byte 0x00 0.--6. 1. "RDLAT_ADJ_F1,Adjustment value for PHY read timing" group.long 0x948++0x03 line.long 0x00 "DENALI_CTL_594,DENALI_CTL_594" hexmask.long.tbyte 0x00 0.--20. 1. "TDFI_CTRLUPD_MAX_F2,Defines the DFI tCTRLUPD_MAX timing parameter (in DFI clocks) the maximum cycles that dfi_ctrlupd_req can be asserted" group.long 0x95C++0x03 line.long 0x00 "DENALI_CTL_599,DENALI_CTL_599" hexmask.long.tbyte 0x00 0.--22. 1. "TDFI_PHYUPD_RESP_F2,Defines the DFI tPHYUPD_RESP timing parameter (in DFI clocks) the maximum cycles between a dfi_phyupd_req assertion and a dfi_phyupd_ack assertion" group.long 0x960++0x03 line.long 0x00 "DENALI_CTL_600,DENALI_CTL_600" hexmask.long 0x00 0.--31. 1. "TDFI_CTRLUPD_INTERVAL_F2,Defines the DFI tCTRLUPD_INTERVAL timing parameter (in DFI clocks) the maximum cycles between dfi_ctrlupd_req assertions" group.long 0x964++0x03 line.long 0x00 "DENALI_CTL_601,DENALI_CTL_601" bitfld.long 0x00 24.--27. "TDFI_CTRL_DELAY_F1,Defines the DFI tCTRL_DELAY timing parameter (in DFI clocks) the delay between a DFI command change and a memory command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "TDFI_CTRL_DELAY_F0,Defines the DFI tCTRL_DELAY timing parameter (in DFI clocks) the delay between a DFI command change and a memory command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--14. 1. "WRLAT_ADJ_F2,Adjustment value for PHY write timing" hexmask.long.byte 0x00 0.--6. 1. "RDLAT_ADJ_F2,Adjustment value for PHY read timing" group.long 0x968++0x03 line.long 0x00 "DENALI_CTL_602,DENALI_CTL_602" bitfld.long 0x00 24.--26. "TDFI_PHY_WRDATA_F0,Defines the DFI tPHY_WRDATA timing parameter (in DFI PHY clocks) the maximum cycles between a dfi_wrdata_en assertion and a dfi_wrdata signal" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--19. "TDFI_DRAM_CLK_ENABLE,Defines the DFI tDRAM_CLK_ENABLE timing parameter (in DFI clocks) the delay between a dfi_dram_clk_disable de-assertion and the memory clock enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TDFI_DRAM_CLK_DISABLE,Defines the DFI tDRAM_CLK_DISABLE timing parameter (in DFI clocks) the delay between a dfi_dram_clock_disable assertion and the memory clock disable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "TDFI_CTRL_DELAY_F2,Defines the DFI tCTRL_DELAY timing parameter (in DFI clocks) the delay between a DFI command change and a memory command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x96C++0x03 line.long 0x00 "DENALI_CTL_603,DENALI_CTL_603" hexmask.long.byte 0x00 24.--30. 1. "TDFI_WRCSLAT_F0,Defines the DFI tPHY_WRCSLAT timing parameter (in DFI PHY clocks) the maximum cycles between a write command and a dfi_wrdata_cs_n assertion" hexmask.long.byte 0x00 16.--22. 1. "TDFI_RDCSLAT_F0,Defines the DFI tPHY_RDCSLAT timing parameter (in DFI PHY clocks) the maximum cycles between a read command and a dfi_rddata_cs_n assertion" newline bitfld.long 0x00 8.--10. "TDFI_PHY_WRDATA_F2,Defines the DFI tPHY_WRDATA timing parameter (in DFI PHY clocks) the maximum cycles between a dfi_wrdata_en assertion and a dfi_wrdata signal" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "TDFI_PHY_WRDATA_F1,Defines the DFI tPHY_WRDATA timing parameter (in DFI PHY clocks) the maximum cycles between a dfi_wrdata_en assertion and a dfi_wrdata signal" "0,1,2,3,4,5,6,7" group.long 0x970++0x03 line.long 0x00 "DENALI_CTL_604,DENALI_CTL_604" hexmask.long.byte 0x00 24.--30. 1. "TDFI_WRCSLAT_F2,Defines the DFI tPHY_WRCSLAT timing parameter (in DFI PHY clocks) the maximum cycles between a write command and a dfi_wrdata_cs_n assertion" hexmask.long.byte 0x00 16.--22. 1. "TDFI_RDCSLAT_F2,Defines the DFI tPHY_RDCSLAT timing parameter (in DFI PHY clocks) the maximum cycles between a read command and a dfi_rddata_cs_n assertion" newline hexmask.long.byte 0x00 8.--14. 1. "TDFI_WRCSLAT_F1,Defines the DFI tPHY_WRCSLAT timing parameter (in DFI PHY clocks) the maximum cycles between a write command and a dfi_wrdata_cs_n assertion" hexmask.long.byte 0x00 0.--6. 1. "TDFI_RDCSLAT_F1,Defines the DFI tPHY_RDCSLAT timing parameter (in DFI PHY clocks) the maximum cycles between a read command and a dfi_rddata_cs_n assertion" group.long 0x974++0x03 line.long 0x00 "DENALI_CTL_605,DENALI_CTL_605" bitfld.long 0x00 24. "BL_ON_FLY_ENABLE,Enables the burst length on the fly feature" "0,1" bitfld.long 0x00 16. "DISABLE_MEMORY_MASKED_WRITE,Restricts the controller from masked write commands" "0,1" newline bitfld.long 0x00 8. "EN_1T_TIMING,Enable 1T timing in a system supporting both 1T and 2T timing" "0,1" hexmask.long.byte 0x00 0.--7. 1. "TDFI_WRDATA_DELAY,Defines the tWRDATA_DELAY timing parameter (in DFI PHY clocks) the maximum cycles between when the dfi_wrdata_en signal is asserted and when the corresponding write data transfer is completed on the DRAM bus" group.long 0x990++0x03 line.long 0x00 "DENALI_CTL_612,DENALI_CTL_612" hexmask.long.byte 0x00 24.--31. 1. "NWR_F0,DRAM NWR value in cycles for chip select 2" bitfld.long 0x00 16.--19. "MC_RESERVED65,MC_RESERVED65" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "MC_RESERVED64,MC_RESERVED64" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "MC_RESERVED63,MC_RESERVED63" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x994++0x03 line.long 0x00 "DENALI_CTL_613,DENALI_CTL_613" hexmask.long.byte 0x00 24.--31. 1. "TRP_AB_F0,DRAM TRP all bank value for frequency copy 0 in cycles" rbitfld.long 0x00 16. "DQS_OSC_IN_PROGRESS_STATUS,DQS Oscillator is in progress" "0,1" newline hexmask.long.byte 0x00 8.--15. 1. "NWR_F2,DRAM NWR value in cycles for chip select 2" hexmask.long.byte 0x00 0.--7. 1. "NWR_F1,DRAM NWR value in cycles for chip select 2" group.long 0x998++0x03 line.long 0x00 "DENALI_CTL_614,DENALI_CTL_614" bitfld.long 0x00 24.--26. "ROW_DIFF,Difference between number of address pins available and number being used" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--17. "BANK_DIFF,Encoded number of banks on the DRAM(s)" "0,1,2,3" newline hexmask.long.byte 0x00 8.--15. 1. "TRP_AB_F2,DRAM TRP all bank value for frequency copy 2 in cycles" hexmask.long.byte 0x00 0.--7. 1. "TRP_AB_F1,DRAM TRP all bank value for frequency copy 1 in cycles" group.long 0x2000++0x03 line.long 0x00 "DENALI_PI_0,DENALI_PI_0" bitfld.long 0x00 8.--11. "PI_DRAM_CLASS,Defines the memory class for the PI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "PI_START,Initiate command processing in the PI" "0,1" group.long 0x200C++0x03 line.long 0x00 "DENALI_PI_3,DENALI_PI_3" bitfld.long 0x00 24. "PI_NORMAL_LVL_SEQ,Enable the PI to finish all the pending leveling before releasing the DFI bus" "0,1" rbitfld.long 0x00 16. "PI_RELEASE_DFI,This is a status whether PI has release DFI" "0,1" newline hexmask.long.word 0x00 0.--15. 1. "PI_ID,Holds the PI ID number" group.long 0x2010++0x03 line.long 0x00 "DENALI_PI_4,DENALI_PI_4" hexmask.long.word 0x00 16.--31. 1. "PI_TCMD_GAP,Specifies the minimum gap in DFI clocks between two commands" bitfld.long 0x00 8.--9. "PI_NOTCARE_PHYUPD,Allow the PI to issue a master request to the controller if a phyupd_req from the PHY has been detected" "0,1,2,3" newline bitfld.long 0x00 0. "PI_INIT_LVL_EN,Enables the initial leveling sequence after PI initialization procedure" "0,1" group.long 0x2014++0x03 line.long 0x00 "DENALI_PI_5,DENALI_PI_5" bitfld.long 0x00 24.--25. "PI_DFI_PHYMSTR_TYPE,DFI Master Request Type used for dfi 4" "0,1,2,3" bitfld.long 0x00 16. "PI_DFI_VERSION,Define the DFI master version set 1 for DFI4" "0,1" newline bitfld.long 0x00 8. "PI_TRAIN_ALL_FREQ_REQ,Triggers training for all supported frequencies in PI_FREQ_MAP" "0,1" hexmask.long.byte 0x00 0.--7. 1. "PI_RESERVED0,PI_RESERVED0" group.long 0x202C++0x03 line.long 0x00 "DENALI_PI_11,DENALI_PI_11" bitfld.long 0x00 16. "PI_INIT_DFS_CALVL_ONLY,Enables frequency training for CA leveling only" "0,1" bitfld.long 0x00 8.--12. "PI_INIT_WORK_FREQ,Indicates the initial work frequency after initialization and initial leveling sequence" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0. "PI_EXIT_AFTER_INIT_CALVL,PI_EXIT_AFTER_INIT_CALVL" "0,1" group.long 0x2030++0x03 line.long 0x00 "DENALI_PI_12,DENALI_PI_12" hexmask.long 0x00 0.--31. 1. "PI_FREQ_MAP,Frequency map for supported working frequencies" group.long 0x2034++0x03 line.long 0x00 "DENALI_PI_13,DENALI_PI_13" bitfld.long 0x00 24.--28. "PI_RANK_NUM_PER_CKE,Defines the number of chip selects share one cke" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--19. "PI_CS_MAP,Defines which chip selects are active" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8. "PI_RESERVED1,PI_RESERVED1" "0,1" bitfld.long 0x00 0. "PI_SW_RST_N,User request to reset the whole PI except the parameter modules" "0,1" group.long 0x2038++0x03 line.long 0x00 "DENALI_PI_14,DENALI_PI_14" bitfld.long 0x00 24.--25. "PI_VRCG_EN,Whether enable VRCG mode in two cases: bit0 - when DFS" "0,1,2,3" bitfld.long 0x00 16.--17. "PI_PREAMBLE_SUPPORT,Defines the read and write preamble length" "0,1,2,3" newline bitfld.long 0x00 8.--11. "PI_TMRR,DRAM tMRR value in memory clock cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "PI_SRX_LVL_TARGET_CS_EN,Defines self refresh exit trigger target rank/ranks training or all ranks training" "0,1" group.long 0x203C++0x03 line.long 0x00 "DENALI_PI_15,DENALI_PI_15" bitfld.long 0x00 8. "PI_RESERVED2,PI_RESERVED2" "0,1" bitfld.long 0x00 0. "PI_MCAREF_FORWARD_ONLY,Controls the generation of AREF from the PI module or forward the MC received value" "0,1" group.long 0x2040++0x03 line.long 0x00 "DENALI_PI_16,DENALI_PI_16" rbitfld.long 0x00 24. "PI_ON_DFIBUS,Monitors the state of the PI controlling the DFI bus" "0,1" hexmask.long.tbyte 0x00 0.--19. 1. "PI_TREF_INTERVAL,Defines the cycles between refreshes to different chip selects" group.long 0x2074++0x03 line.long 0x00 "DENALI_PI_29,DENALI_PI_29" hexmask.long.byte 0x00 16.--23. 1. "PI_TDFI_WRLVL_EN,Defines the DFI tWRLVL_EN timing parameter (in DFI clocks) the minimum cycles from a dfi_wrlvl_en assertion to the first dfi_wrlvl_strobe assertion" rbitfld.long 0x00 8. "PI_WRLVL_ERROR_STATUS,Holds the error associated with the write level error interrupt" "0,1" newline bitfld.long 0x00 0.--3. "PI_WRLVL_CS_MAP,Defines the chip select map for write leveling operations" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20B0++0x03 line.long 0x00 "DENALI_PI_44,DENALI_PI_44" bitfld.long 0x00 24.--27. "PI_RDLVL_GATE_CS_MAP,Defines the chip select map for gate training operations" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PI_RDLVL_CS_MAP,Defines the chip select map for data eye training operations" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8. "PI_RDLVL_GATE_ROTATE,Enables rotational CS for interval gate training" "0,1" bitfld.long 0x00 0. "PI_RDLVL_ROTATE,Enables rotational CS for interval data eye training" "0,1" group.long 0x20B4++0x03 line.long 0x00 "DENALI_PI_45,DENALI_PI_45" hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_RDLVL_RR,Defines the DFI tRDLVL_RR timing parameter (in DFI clocks) the minimum cycles between read commands" group.long 0x20DC++0x03 line.long 0x00 "DENALI_PI_55,DENALI_PI_55" hexmask.long.byte 0x00 16.--23. 1. "PI_TDFI_CALVL_EN,Defines the DFI tCALVL_EN timing parameter (in DFI clocks) the minimum cycles between a dfi_calvl_en assertion and a dfi_cke de-assertion" bitfld.long 0x00 8.--11. "PI_CALVL_CS_MAP,Defines the chip select map for CA training operations" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. "PI_CALVL_ROTATE,Enables rotational CS for interval CA training" "0,1" group.long 0x2100++0x03 line.long 0x00 "DENALI_PI_64,DENALI_PI_64" bitfld.long 0x00 24.--27. "PI_WDQLVL_CS_MAP,Map of CS's included in write DQ training sequence" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16. "PI_WDQLVL_ROTATE,Enables write DQ training rotate for interval training" "0,1" newline bitfld.long 0x00 8.--11. "PI_WDQLVL_RESP_MASK,Write DQ training response mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--2. "PI_WDQLVL_BST_NUM,Defines the number of write/read bursts issued at each step in write DQ training" "0,1,2,3,4,5,6,7" group.long 0x2118++0x03 line.long 0x00 "DENALI_PI_70,DENALI_PI_70" bitfld.long 0x00 24. "PI_PARALLEL_WDQLVL_EN,Enable per rank parallel Write DQ training for LPDDR4" "0,1" bitfld.long 0x00 16. "PI_WDQLVL_OSC_EN,Enable for DQS oscillator triggered write DQ training" "0,1" newline rbitfld.long 0x00 8.--9. "PI_WDQLVL_ERROR_STATUS,Holds the error associated with the write dq level error interrupt" "0,1,2,3" bitfld.long 0x00 0. "PI_WDQLVL_DISABLE_DFS,Disable automatic write DQ training on freq change" "0,1" group.long 0x211C++0x03 line.long 0x00 "DENALI_PI_71,DENALI_PI_71" bitfld.long 0x00 24.--27. "PI_RESERVED6,PI_RESERVED6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--20. "PI_TCCD,DRAM CAS-to-CAS value in cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--10. "PI_ROW_DIFF,Difference between number of address pins available and number being used" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--1. "PI_BANK_DIFF,Difference between number of bank pins available and number being used" "0,1,2,3" group.long 0x2170++0x03 line.long 0x00 "DENALI_PI_92,DENALI_PI_92" rbitfld.long 0x00 24. "PI_BIST_LFSR_PATTERN_DONE,BIST operation lfsr pattern data pattern 1'b0 means the data is useful 1'b1 means next pattern sequence can ingore" "0,1" rbitfld.long 0x00 16.--17. "PI_BIST_RESULT,BIST operation status (pass/fail)" "0,1,2,3" newline bitfld.long 0x00 8. "PI_BIST_GO,Initiate a BIST operation" "0,1" rbitfld.long 0x00 0.--1. "PI_UPDATE_ERROR_STATUS,Identifies the source of any DFI PI-initiated update errors" "0,1,2,3" group.long 0x2284++0x03 line.long 0x00 "DENALI_PI_161,DENALI_PI_161" hexmask.long.byte 0x00 24.--31. 1. "PI_TSDO_F1,The delay from the read preamble training MRS command to the data strobe drive out for frequency set 1 in PI clocks" hexmask.long.byte 0x00 16.--23. 1. "PI_TSDO_F0,The delay from the read preamble training MRS command to the data strobe drive out for frequency set 0 in PI clocks" newline bitfld.long 0x00 8.--10. "PI_PHYMSTR_REQ_ACK_LOOP_DELAY,The delay between phymstr_req and inner phymstr_ack when PI_DISABLE_PHYMSTR_REQ set 1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "PI_NOTCARE_MC_INIT_START,Defines whether PI waits for the controller to initiate dfi_init_start before PI memory initialization" "0,1" group.long 0x2288++0x03 line.long 0x00 "DENALI_PI_162,DENALI_PI_162" hexmask.long.byte 0x00 0.--7. 1. "PI_TSDO_F2,The delay from the read preamble training MRS command to the data strobe drive out for frequency set 2 in PI clocks" group.long 0x228C++0x03 line.long 0x00 "DENALI_PI_163,DENALI_PI_163" hexmask.long.byte 0x00 0.--7. 1. "PI_TDELAY_RDWR_2_BUS_IDLE_F0,The delay from read or write to bus idle for frequency set 0" group.long 0x2290++0x03 line.long 0x00 "DENALI_PI_164,DENALI_PI_164" hexmask.long.byte 0x00 0.--7. 1. "PI_TDELAY_RDWR_2_BUS_IDLE_F1,The delay from read or write to bus idle for frequency set 1" group.long 0x2294++0x03 line.long 0x00 "DENALI_PI_165,DENALI_PI_165" hexmask.long.word 0x00 8.--19. 1. "PI_ZQINIT_F0,Number of cycles needed for a ZQINIT command for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_TDELAY_RDWR_2_BUS_IDLE_F2,The delay from read or write to bus idle for frequency set 2" group.long 0x2298++0x03 line.long 0x00 "DENALI_PI_166,DENALI_PI_166" hexmask.long.word 0x00 16.--27. 1. "PI_ZQINIT_F2,Number of cycles needed for a ZQINIT command for frequency set 2" hexmask.long.word 0x00 0.--11. 1. "PI_ZQINIT_F1,Number of cycles needed for a ZQINIT command for frequency set 1" group.long 0x229C++0x03 line.long 0x00 "DENALI_PI_167,DENALI_PI_167" hexmask.long.byte 0x00 24.--30. 1. "PI_CASLAT_LIN_F1,Sets latency from read command sent to data received from/to controller for frequency set 1" hexmask.long.byte 0x00 16.--22. 1. "PI_WRLAT_F1,DRAM WRLAT value in cycles for frequency set 1" newline hexmask.long.byte 0x00 8.--14. 1. "PI_CASLAT_LIN_F0,Sets latency from read command sent to data received from/to controller for frequency set 0" hexmask.long.byte 0x00 0.--6. 1. "PI_WRLAT_F0,DRAM WRLAT value in cycles for frequency set 0" group.long 0x22A0++0x03 line.long 0x00 "DENALI_PI_168,DENALI_PI_168" hexmask.long.word 0x00 16.--25. 1. "PI_TRFC_F0,DRAM tRFC value in memory clocks for frequency set 0" hexmask.long.byte 0x00 8.--14. 1. "PI_CASLAT_LIN_F2,Sets latency from read command sent to data received from/to controller for frequency set 2" newline hexmask.long.byte 0x00 0.--6. 1. "PI_WRLAT_F2,DRAM WRLAT value in cycles for frequency set 2" group.long 0x22A4++0x03 line.long 0x00 "DENALI_PI_169,DENALI_PI_169" hexmask.long.tbyte 0x00 0.--19. 1. "PI_TREF_F0,DRAM tREF value in memory clocks for frequency set 0" group.long 0x22A8++0x03 line.long 0x00 "DENALI_PI_170,DENALI_PI_170" hexmask.long.word 0x00 0.--9. 1. "PI_TRFC_F1,DRAM tRFC value in memory clocks for frequency set 1" group.long 0x22AC++0x03 line.long 0x00 "DENALI_PI_171,DENALI_PI_171" hexmask.long.tbyte 0x00 0.--19. 1. "PI_TREF_F1,DRAM tREF value in memory clocks for frequency set 1" group.long 0x22B0++0x03 line.long 0x00 "DENALI_PI_172,DENALI_PI_172" hexmask.long.word 0x00 0.--9. 1. "PI_TRFC_F2,DRAM tRFC value in memory clocks for frequency set 2" group.long 0x22B4++0x03 line.long 0x00 "DENALI_PI_173,DENALI_PI_173" bitfld.long 0x00 24.--27. "PI_TDFI_CTRL_DELAY_F0,Defines the DFI tCTRL_DELAY timing parameter (in DFI clocks) for frequency set 0 the delay between a DFI command change and a memory command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.tbyte 0x00 0.--19. 1. "PI_TREF_F2,DRAM tREF value in memory clocks for frequency set 2" group.long 0x22B8++0x03 line.long 0x00 "DENALI_PI_174,DENALI_PI_174" bitfld.long 0x00 24.--25. "PI_WRLVL_EN_F1,Enable the PI write leveling module for frequency set 1" "0,1,2,3" bitfld.long 0x00 16.--17. "PI_WRLVL_EN_F0,Enable the PI write leveling module for frequency set 0" "0,1,2,3" newline bitfld.long 0x00 8.--11. "PI_TDFI_CTRL_DELAY_F2,Defines the DFI tCTRL_DELAY timing parameter (in DFI clocks) for frequency set 2 the delay between a DFI command change and a memory command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "PI_TDFI_CTRL_DELAY_F1,Defines the DFI tCTRL_DELAY timing parameter (in DFI clocks) for frequency set 1 the delay between a DFI command change and a memory command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x22BC++0x03 line.long 0x00 "DENALI_PI_175,DENALI_PI_175" hexmask.long.word 0x00 8.--17. 1. "PI_TDFI_WRLVL_WW_F0,Defines the DFI tWRLVL_WW timing parameter (in DFI clocks) for frequency set 0 the minimum cycles between dfi_wrlvl_strobe assertions" bitfld.long 0x00 0.--1. "PI_WRLVL_EN_F2,Enable the PI write leveling module for frequency set 2" "0,1,2,3" group.long 0x22C0++0x03 line.long 0x00 "DENALI_PI_176,DENALI_PI_176" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_WRLVL_WW_F2,Defines the DFI tWRLVL_WW timing parameter (in DFI clocks) for frequency set 2 the minimum cycles between dfi_wrlvl_strobe assertions" hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_WRLVL_WW_F1,Defines the DFI tWRLVL_WW timing parameter (in DFI clocks) for frequency set 1 the minimum cycles between dfi_wrlvl_strobe assertions" group.long 0x22C4++0x03 line.long 0x00 "DENALI_PI_177,DENALI_PI_177" bitfld.long 0x00 24. "PI_ODT_EN_F1,Enable support of DRAM ODT" "0,1" hexmask.long.byte 0x00 16.--23. 1. "PI_TODTL_2CMD_F1,Defines the DRAM delay from an ODT de-assertion to the next non-write non-read command for frequency set 1" newline bitfld.long 0x00 8. "PI_ODT_EN_F0,Enable support of DRAM ODT" "0,1" hexmask.long.byte 0x00 0.--7. 1. "PI_TODTL_2CMD_F0,Defines the DRAM delay from an ODT de-assertion to the next non-write non-read command for frequency set 0" group.long 0x22C8++0x03 line.long 0x00 "DENALI_PI_178,DENALI_PI_178" bitfld.long 0x00 24.--27. "PI_TODTON_MIN_F0,Defines the point in time when the device termination circuit leaves High-Z and ODT resistance begins to turn on for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PI_ODTLON_F0,Defines the latency from a CAS-2 command to the tODTon reference for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8. "PI_ODT_EN_F2,Enable support of DRAM ODT" "0,1" hexmask.long.byte 0x00 0.--7. 1. "PI_TODTL_2CMD_F2,Defines the DRAM delay from an ODT de-assertion to the next non-write non-read command for frequency set 2" group.long 0x22D4++0x03 line.long 0x00 "DENALI_PI_181,DENALI_PI_181" bitfld.long 0x00 24.--25. "PI_RDLVL_GATE_EN_F0,Enable the PI gate training module for frequency set 0" "0,1,2,3" bitfld.long 0x00 16.--17. "PI_RDLVL_EN_F0,Enable the PI data eye training module for frequency set 0" "0,1,2,3" newline bitfld.long 0x00 8.--13. "PI_RD_TO_ODTH_F2,Defines the delay from a read command to ODT assertion for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "PI_RD_TO_ODTH_F1,Defines the delay from a read command to ODT assertion for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x22D8++0x03 line.long 0x00 "DENALI_PI_182,DENALI_PI_182" bitfld.long 0x00 24.--25. "PI_RDLVL_GATE_EN_F2,Enable the PI gate training module for frequency set 2" "0,1,2,3" bitfld.long 0x00 16.--17. "PI_RDLVL_EN_F2,Enable the PI data eye training module for frequency set 2" "0,1,2,3" newline bitfld.long 0x00 8.--9. "PI_RDLVL_GATE_EN_F1,Enable the PI gate training module for frequency set 1" "0,1,2,3" bitfld.long 0x00 0.--1. "PI_RDLVL_EN_F1,Enable the PI data eye training module for frequency set 1" "0,1,2,3" group.long 0x22E8++0x03 line.long 0x00 "DENALI_PI_186,DENALI_PI_186" hexmask.long.byte 0x00 24.--30. 1. "PI_WRLAT_ADJ_F0,Adjusts the relative timing in memory clocks between DFI write commands and the dfi_wrdata_en signal for frequency set 0" hexmask.long.byte 0x00 16.--22. 1. "PI_RDLAT_ADJ_F2,Adjusts the relative timing between DFI read commands and the dfi_rddata_en signal for frequency set 2" newline hexmask.long.byte 0x00 8.--14. 1. "PI_RDLAT_ADJ_F1,Adjusts the relative timing between DFI read commands and the dfi_rddata_en signal for frequency set 1" hexmask.long.byte 0x00 0.--6. 1. "PI_RDLAT_ADJ_F0,Adjusts the relative timing between DFI read commands and the dfi_rddata_en signal for frequency set 0" group.long 0x22EC++0x03 line.long 0x00 "DENALI_PI_187,DENALI_PI_187" bitfld.long 0x00 24.--26. "PI_TDFI_PHY_WRDATA_F1,Defines the DFI tPHY_WRDATA timing parameter (in DFI PHY clocks) for frequency set 1 the maximum cycles between a dfi_wrdata_en assertion and a dfi_wrdata signal" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. "PI_TDFI_PHY_WRDATA_F0,Defines the DFI tPHY_WRDATA timing parameter (in DFI PHY clocks) for frequency set 0 the maximum cycles between a dfi_wrdata_en assertion and a dfi_wrdata signal" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--14. 1. "PI_WRLAT_ADJ_F2,Adjusts the relative timing in memory clocks between DFI write commands and the dfi_wrdata_en signal for frequency set 2" hexmask.long.byte 0x00 0.--6. 1. "PI_WRLAT_ADJ_F1,Adjusts the relative timing in memory clocks between DFI write commands and the dfi_wrdata_en signal for frequency set 1" group.long 0x22F0++0x03 line.long 0x00 "DENALI_PI_188,DENALI_PI_188" hexmask.long.word 0x00 8.--17. 1. "PI_TDFI_CALVL_CC_F0,Defines the DFI tCALVL_CC timing parameter (in DFI clocks) for frequency set 0 the minimum cycles between calibration commands" bitfld.long 0x00 0.--2. "PI_TDFI_PHY_WRDATA_F2,Defines the DFI tPHY_WRDATA timing parameter (in DFI PHY clocks) for frequency set 2 the maximum cycles between a dfi_wrdata_en assertion and a dfi_wrdata signal" "0,1,2,3,4,5,6,7" group.long 0x22F4++0x03 line.long 0x00 "DENALI_PI_189,DENALI_PI_189" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_CALVL_CC_F1,Defines the DFI tCALVL_CC timing parameter (in DFI clocks) for frequency set 1 the minimum cycles between calibration commands" hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_CALVL_CAPTURE_F0,Defines the DFI tCALVL_CAPTURE timing parameter (in DFI clocks) for frequency set 0 the minimum cycles between a calibration command and a dfi_calvl_capture pulse" group.long 0x22F8++0x03 line.long 0x00 "DENALI_PI_190,DENALI_PI_190" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_CALVL_CC_F2,Defines the DFI tCALVL_CC timing parameter (in DFI clocks) for frequency set 2 the minimum cycles between calibration commands" hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_CALVL_CAPTURE_F1,Defines the DFI tCALVL_CAPTURE timing parameter (in DFI clocks) for frequency set 1 the minimum cycles between a calibration command and a dfi_calvl_capture pulse" group.long 0x22FC++0x03 line.long 0x00 "DENALI_PI_191,DENALI_PI_191" bitfld.long 0x00 24.--25. "PI_CALVL_EN_F1,Enable the PI CA training module" "0,1,2,3" bitfld.long 0x00 16.--17. "PI_CALVL_EN_F0,Enable the PI CA training module" "0,1,2,3" newline hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_CALVL_CAPTURE_F2,Defines the DFI tCALVL_CAPTURE timing parameter (in DFI clocks) for frequency set 2 the minimum cycles between a calibration command and a dfi_calvl_capture pulse" group.long 0x2300++0x03 line.long 0x00 "DENALI_PI_192,DENALI_PI_192" hexmask.long.word 0x00 16.--29. 1. "PI_TCAENT_F0,Defines the DRAM tCAENT term in memory clocks for frequency set 0" bitfld.long 0x00 8.--12. "PI_TMRZ_F0,Defines the delay between a MRW CA exit command and the DQ tristate in memory clocks for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--1. "PI_CALVL_EN_F2,Enable the PI CA training module" "0,1,2,3" group.long 0x2304++0x03 line.long 0x00 "DENALI_PI_193,DENALI_PI_193" bitfld.long 0x00 24.--28. "PI_TMRZ_F2,Defines the delay between a MRW CA exit command and the DQ tristate in memory clocks for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 8.--21. 1. "PI_TCAENT_F1,Defines the DRAM tCAENT term in memory clocks for frequency set 1" newline bitfld.long 0x00 0.--4. "PI_TMRZ_F1,Defines the delay between a MRW CA exit command and the DQ tristate in memory clocks for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2308++0x03 line.long 0x00 "DENALI_PI_194,DENALI_PI_194" bitfld.long 0x00 24.--28. "PI_TDFI_CASEL_F0,Defines the DFI tcalvl_ca_sel timing parameter the width of dfi_calvl_ca_sel in PHY DFI clock cycles for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "PI_TDFI_CACSCA_F0,Defines the DFI tcalvl_cs_ca timing parameter the number of PHY DFI clocks from the assertion of dfi_calvl_ca_sel to the assertion of dfi_cs for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--13. 1. "PI_TCAENT_F2,Defines the DRAM tCAENT term in memory clocks for frequency set 2" group.long 0x230C++0x03 line.long 0x00 "DENALI_PI_195,DENALI_PI_195" hexmask.long.word 0x00 16.--25. 1. "PI_TVREF_LONG_F0,Defines the delay in PI clock cycles between the dfi_calvl_strobe to the next command if the pi_calvl_vref_stepsize parameter gt 1 for frequency set 0" hexmask.long.word 0x00 0.--9. 1. "PI_TVREF_SHORT_F0,Defines the delay in PI clock cycles between the dfi_calvl_strobe to the next command if the pi_calvl_vref_stepsize parameter = 1 for frequency set 0" group.long 0x2310++0x03 line.long 0x00 "DENALI_PI_196,DENALI_PI_196" hexmask.long.word 0x00 16.--25. 1. "PI_TVREF_SHORT_F1,Defines the delay in PI clock cycles between the dfi_calvl_strobe to the next command if the pi_calvl_vref_stepsize parameter = 1 for frequency set 1" bitfld.long 0x00 8.--12. "PI_TDFI_CASEL_F1,Defines the DFI tcalvl_ca_sel timing parameter the width of dfi_calvl_ca_sel in PHY DFI clock cycles for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "PI_TDFI_CACSCA_F1,Defines the DFI tcalvl_cs_ca timing parameter the number of PHY DFI clocks from the assertion of dfi_calvl_ca_sel to the assertion of dfi_cs for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2314++0x03 line.long 0x00 "DENALI_PI_197,DENALI_PI_197" bitfld.long 0x00 24.--28. "PI_TDFI_CASEL_F2,Defines the DFI tcalvl_ca_sel timing parameter the width of dfi_calvl_ca_sel in PHY DFI clock cycles for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "PI_TDFI_CACSCA_F2,Defines the DFI tcalvl_cs_ca timing parameter the number of PHY DFI clocks from the assertion of dfi_calvl_ca_sel to the assertion of dfi_cs for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--9. 1. "PI_TVREF_LONG_F1,Defines the delay in PI clock cycles between the dfi_calvl_strobe to the next command if the pi_calvl_vref_stepsize parameter gt 1 for frequency set 1" group.long 0x2318++0x03 line.long 0x00 "DENALI_PI_198,DENALI_PI_198" hexmask.long.word 0x00 16.--25. 1. "PI_TVREF_LONG_F2,Defines the delay in PI clock cycles between the dfi_calvl_strobe to the next command if the pi_calvl_vref_stepsize parameter gt 1 for frequency set 2" hexmask.long.word 0x00 0.--9. 1. "PI_TVREF_SHORT_F2,Defines the delay in PI clock cycles between the dfi_calvl_strobe to the next command if the pi_calvl_vref_stepsize parameter = 1 for frequency set 2" group.long 0x231C++0x03 line.long 0x00 "DENALI_PI_199,DENALI_PI_199" hexmask.long.byte 0x00 24.--30. 1. "PI_CALVL_VREF_INITIAL_STOP_POINT_F1,The end point of initial training for the Vref(ca) training for frequency set 1 { vrefca_range vref_ca_setting[5:0]}" hexmask.long.byte 0x00 16.--22. 1. "PI_CALVL_VREF_INITIAL_START_POINT_F1,The start point of initial training for the Vref(ca) training for frequency set 1 { vrefca_range vref_ca_setting[5:0]}" newline hexmask.long.byte 0x00 8.--14. 1. "PI_CALVL_VREF_INITIAL_STOP_POINT_F0,The end point of initial training for the Vref(ca) training for frequency set 0 { vrefca_range vref_ca_setting[5:0]}" hexmask.long.byte 0x00 0.--6. 1. "PI_CALVL_VREF_INITIAL_START_POINT_F0,The start point of initial training for the Vref(ca) training for frequency set 0 { vrefca_range vref_ca_setting[5:0]}" group.long 0x2320++0x03 line.long 0x00 "DENALI_PI_200,DENALI_PI_200" bitfld.long 0x00 24.--27. "PI_CALVL_VREF_DELTA_F1,The delta fro the current CA vref for non-initial CA training for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PI_CALVL_VREF_DELTA_F0,The delta fro the current CA vref for non-initial CA training for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--14. 1. "PI_CALVL_VREF_INITIAL_STOP_POINT_F2,The end point of initial training for the Vref(ca) training for frequency set 2 { vrefca_range vref_ca_setting[5:0]}" hexmask.long.byte 0x00 0.--6. 1. "PI_CALVL_VREF_INITIAL_START_POINT_F2,The start point of initial training for the Vref(ca) training for frequency set 2 { vrefca_range vref_ca_setting[5:0]}" group.long 0x2324++0x03 line.long 0x00 "DENALI_PI_201,DENALI_PI_201" hexmask.long.byte 0x00 24.--31. 1. "PI_TMRWCKEL_F0,Valid Clock and CS Requirement before CKE deassert after MRW Command for frequency set 0" bitfld.long 0x00 16.--20. "PI_TXP_F0,CKE assert to next valid command delay for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--11. "PI_TDFI_CALVL_STROBE_F0,Minimum number of DFI PHY clocks from dfi_calvl_data to dfi_calvl_strobe mode for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "PI_CALVL_VREF_DELTA_F2,The delta fro the current CA vref for non-initial CA training for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2328++0x03 line.long 0x00 "DENALI_PI_202,DENALI_PI_202" hexmask.long.byte 0x00 24.--31. 1. "PI_TMRWCKEL_F1,Valid Clock and CS Requirement before CKE deassert after MRW Command for frequency set 1" bitfld.long 0x00 16.--20. "PI_TXP_F1,CKE assert to next valid command delay for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--11. "PI_TDFI_CALVL_STROBE_F1,Minimum number of DFI PHY clocks from dfi_calvl_data to dfi_calvl_strobe mode for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--4. "PI_TCKELCK_F0,Valid Clock Requirement after CKE deassert for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x232C++0x03 line.long 0x00 "DENALI_PI_203,DENALI_PI_203" hexmask.long.byte 0x00 24.--31. 1. "PI_TMRWCKEL_F2,Valid Clock and CS Requirement before CKE deassert after MRW Command for frequency set 2" bitfld.long 0x00 16.--20. "PI_TXP_F2,CKE assert to next valid command delay for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--11. "PI_TDFI_CALVL_STROBE_F2,Minimum number of DFI PHY clocks from dfi_calvl_data to dfi_calvl_strobe mode for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--4. "PI_TCKELCK_F1,Valid Clock Requirement after CKE deassert for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2330++0x03 line.long 0x00 "DENALI_PI_204,DENALI_PI_204" hexmask.long.word 0x00 8.--17. 1. "PI_TDFI_INIT_START_F0,Defines the DFI tINIT_START timing parameter (in DFI clocks) for frequency set 0 the maximum number of cycles between a dfi_init_start assertion and a dfi_init_complete de-assertion from the PHY" bitfld.long 0x00 0.--4. "PI_TCKELCK_F2,Valid Clock Requirement after CKE deassert for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2334++0x03 line.long 0x00 "DENALI_PI_205,DENALI_PI_205" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_INIT_START_F1,Defines the DFI tINIT_START timing parameter (in DFI clocks) for frequency set 1 the maximum number of cycles between a dfi_init_start assertion and a dfi_init_complete de-assertion from the PHY" hexmask.long.word 0x00 0.--15. 1. "PI_TDFI_INIT_COMPLETE_F0,Defines the DFI tINIT_COMPLETE timing parameter (in DFI clocks) for frequency set 0 the maximum cycles between a dfi_init_start de-assertion and a dfi_init_complete assertion from the PHY" group.long 0x2338++0x03 line.long 0x00 "DENALI_PI_206,DENALI_PI_206" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_INIT_START_F2,Defines the DFI tINIT_START timing parameter (in DFI clocks) for frequency set 2 the maximum number of cycles between a dfi_init_start assertion and a dfi_init_complete de-assertion from the PHY" hexmask.long.word 0x00 0.--15. 1. "PI_TDFI_INIT_COMPLETE_F1,Defines the DFI tINIT_COMPLETE timing parameter (in DFI clocks) for frequency set 1 the maximum cycles between a dfi_init_start de-assertion and a dfi_init_complete assertion from the PHY" group.long 0x233C++0x03 line.long 0x00 "DENALI_PI_207,DENALI_PI_207" bitfld.long 0x00 16.--21. "PI_TCKEHDQS_F0,The DRAM timing tCKEHDQS minimum delay from CKE high to strobe high impedance for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--15. 1. "PI_TDFI_INIT_COMPLETE_F2,Defines the DFI tINIT_COMPLETE timing parameter (in DFI clocks) for frequency set 2 the maximum cycles between a dfi_init_start de-assertion and a dfi_init_complete assertion from the PHY" group.long 0x2340++0x03 line.long 0x00 "DENALI_PI_208,DENALI_PI_208" bitfld.long 0x00 16.--21. "PI_TCKEHDQS_F1,The DRAM timing tCKEHDQS minimum delay from CKE high to strobe high impedance for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--9. 1. "PI_TFC_F0,The delay in PHY clock cycles from setting MR13" group.long 0x2344++0x03 line.long 0x00 "DENALI_PI_209,DENALI_PI_209" bitfld.long 0x00 16.--21. "PI_TCKEHDQS_F2,The DRAM timing tCKEHDQS minimum delay from CKE high to strobe high impedance for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--9. 1. "PI_TFC_F1,The delay in PHY clock cycles from setting MR13" group.long 0x2348++0x03 line.long 0x00 "DENALI_PI_210,DENALI_PI_210" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_WDQLVL_WR_F0,Switch time from write to read for frequency set 0" hexmask.long.word 0x00 0.--9. 1. "PI_TFC_F2,The delay in PHY clock cycles from setting MR13" group.long 0x234C++0x03 line.long 0x00 "DENALI_PI_211,DENALI_PI_211" hexmask.long.byte 0x00 24.--30. 1. "PI_WDQLVL_VREF_INITIAL_STOP_POINT_F0,Write DQ training vref initial training stop value for frequency set 0" hexmask.long.byte 0x00 16.--22. 1. "PI_WDQLVL_VREF_INITIAL_START_POINT_F0,Write DQ training vref initial training start value for frequency set 0" newline hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_WDQLVL_RW_F0,Switch time from read to write for frequency set 0" group.long 0x2350++0x03 line.long 0x00 "DENALI_PI_212,DENALI_PI_212" bitfld.long 0x00 16.--17. "PI_NTP_TRAIN_EN_F0,Indicates whether the no topology WDQ training is enabled" "0,1,2,3" bitfld.long 0x00 8.--9. "PI_WDQLVL_EN_F0,Indicates if Write DQ leveling is enabled for frequency set 0" "0,1,2,3" newline bitfld.long 0x00 0.--3. "PI_WDQLVL_VREF_DELTA_F0,The delta from the current Write DQ vref adjustment for non-initial wdq training for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2354++0x03 line.long 0x00 "DENALI_PI_213,DENALI_PI_213" hexmask.long.word 0x00 16.--25. 1. "PI_TDFI_WDQLVL_RW_F1,Switch time from read to write for frequency set 1" hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_WDQLVL_WR_F1,Switch time from write to read for frequency set 1" group.long 0x2358++0x03 line.long 0x00 "DENALI_PI_214,DENALI_PI_214" bitfld.long 0x00 24.--25. "PI_WDQLVL_EN_F1,Indicates if Write DQ leveling is enabled for frequency set 1" "0,1,2,3" bitfld.long 0x00 16.--19. "PI_WDQLVL_VREF_DELTA_F1,The delta from the current Write DQ vref adjustment for non-initial wdq training for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--14. 1. "PI_WDQLVL_VREF_INITIAL_STOP_POINT_F1,Write DQ training vref initial training stop value for frequency set 1" hexmask.long.byte 0x00 0.--6. 1. "PI_WDQLVL_VREF_INITIAL_START_POINT_F1,Write DQ training vref initial training start value for frequency set 1" group.long 0x235C++0x03 line.long 0x00 "DENALI_PI_215,DENALI_PI_215" hexmask.long.word 0x00 8.--17. 1. "PI_TDFI_WDQLVL_WR_F2,Switch time from write to read for frequency set 2" bitfld.long 0x00 0.--1. "PI_NTP_TRAIN_EN_F1,Indicates whether the no topology WDQ training is enabled" "0,1,2,3" group.long 0x2360++0x03 line.long 0x00 "DENALI_PI_216,DENALI_PI_216" hexmask.long.byte 0x00 24.--30. 1. "PI_WDQLVL_VREF_INITIAL_STOP_POINT_F2,Write DQ training vref initial training stop value for frequency set 2" hexmask.long.byte 0x00 16.--22. 1. "PI_WDQLVL_VREF_INITIAL_START_POINT_F2,Write DQ training vref initial training start value for frequency set 2" newline hexmask.long.word 0x00 0.--9. 1. "PI_TDFI_WDQLVL_RW_F2,Switch time from read to write for frequency set 2" group.long 0x2364++0x03 line.long 0x00 "DENALI_PI_217,DENALI_PI_217" hexmask.long.byte 0x00 24.--31. 1. "PI_TRTP_F0,DRAM tRTP value in cycles for frequency set 0" bitfld.long 0x00 16.--17. "PI_NTP_TRAIN_EN_F2,Indicates whether the no topology WDQ training is enabled" "0,1,2,3" newline bitfld.long 0x00 8.--9. "PI_WDQLVL_EN_F2,Indicates if Write DQ leveling is enabled for frequency set 2" "0,1,2,3" bitfld.long 0x00 0.--3. "PI_WDQLVL_VREF_DELTA_F2,The delta from the current Write DQ vref adjustment for non-initial wdq training for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2368++0x03 line.long 0x00 "DENALI_PI_218,DENALI_PI_218" hexmask.long.byte 0x00 24.--31. 1. "PI_TWR_F0,DRAM tWR value in cycles for frequency set 0" bitfld.long 0x00 16.--21. "PI_TWTR_F0,DRAM tWTR value in cycles for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PI_TRCD_F0,DRAM tRCD value in cycles for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_TRP_F0,DRAM tRP value in cycles for frequency set 0" group.long 0x236C++0x03 line.long 0x00 "DENALI_PI_219,DENALI_PI_219" hexmask.long.tbyte 0x00 0.--16. 1. "PI_TRAS_MAX_F0,DRAM tRAS_MAX value in cycles for frequency set 0" group.long 0x2370++0x03 line.long 0x00 "DENALI_PI_220,DENALI_PI_220" bitfld.long 0x00 24.--29. "PI_TCCDMW_F0,LPDDR4 DRAM tCCDMW in cycles for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--19. "PI_TDQSCK_MAX_F0,Additional delay needed for tDQSCK for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--8. 1. "PI_TRAS_MIN_F0,DRAM tRAS_MIN value in cycles for frequency set 0" group.long 0x2374++0x03 line.long 0x00 "DENALI_PI_221,DENALI_PI_221" hexmask.long.byte 0x00 24.--31. 1. "PI_TRTP_F1,DRAM tRTP value in cycles for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_TMRW_F0,DRAM tMRW value in cycles for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_TMRD_F0,DRAM tMRD value in cycles for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_TSR_F0,Min cycles from sref entry to sref exit for frequency set 0" group.long 0x2378++0x03 line.long 0x00 "DENALI_PI_222,DENALI_PI_222" hexmask.long.byte 0x00 24.--31. 1. "PI_TWR_F1,DRAM tWR value in cycles for frequency set 1" bitfld.long 0x00 16.--21. "PI_TWTR_F1,DRAM tWTR value in cycles for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PI_TRCD_F1,DRAM tRCD value in cycles for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_TRP_F1,DRAM tRP value in cycles for frequency set 1" group.long 0x237C++0x03 line.long 0x00 "DENALI_PI_223,DENALI_PI_223" hexmask.long.tbyte 0x00 0.--16. 1. "PI_TRAS_MAX_F1,DRAM tRAS_MAX value in cycles for frequency set 1" group.long 0x2380++0x03 line.long 0x00 "DENALI_PI_224,DENALI_PI_224" bitfld.long 0x00 24.--29. "PI_TCCDMW_F1,LPDDR4 DRAM tCCDMW in cycles for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--19. "PI_TDQSCK_MAX_F1,Additional delay needed for tDQSCK for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--8. 1. "PI_TRAS_MIN_F1,DRAM tRAS_MIN value in cycles for frequency set 1" group.long 0x2384++0x03 line.long 0x00 "DENALI_PI_225,DENALI_PI_225" hexmask.long.byte 0x00 24.--31. 1. "PI_TRTP_F2,DRAM tRTP value in cycles for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_TMRW_F1,DRAM tMRW value in cycles for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_TMRD_F1,DRAM tMRD value in cycles for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_TSR_F1,Min cycles from sref entry to sref exit for frequency set 1" group.long 0x2388++0x03 line.long 0x00 "DENALI_PI_226,DENALI_PI_226" hexmask.long.byte 0x00 24.--31. 1. "PI_TWR_F2,DRAM tWR value in cycles for frequency set 2" bitfld.long 0x00 16.--21. "PI_TWTR_F2,DRAM tWTR value in cycles for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PI_TRCD_F2,DRAM tRCD value in cycles for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_TRP_F2,DRAM tRP value in cycles for frequency set 2" group.long 0x238C++0x03 line.long 0x00 "DENALI_PI_227,DENALI_PI_227" hexmask.long.tbyte 0x00 0.--16. 1. "PI_TRAS_MAX_F2,DRAM tRAS_MAX value in cycles for frequency set 2" group.long 0x2390++0x03 line.long 0x00 "DENALI_PI_228,DENALI_PI_228" bitfld.long 0x00 24.--29. "PI_TCCDMW_F2,LPDDR4 DRAM tCCDMW in cycles for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--19. "PI_TDQSCK_MAX_F2,Additional delay needed for tDQSCK for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--8. 1. "PI_TRAS_MIN_F2,DRAM tRAS_MIN value in cycles for frequency set 2" group.long 0x2394++0x03 line.long 0x00 "DENALI_PI_229,DENALI_PI_229" hexmask.long.byte 0x00 16.--23. 1. "PI_TMRW_F2,DRAM tMRW value in cycles for frequency set 2" hexmask.long.byte 0x00 8.--15. 1. "PI_TMRD_F2,DRAM tMRD value in cycles for frequency set 2" newline hexmask.long.byte 0x00 0.--7. 1. "PI_TSR_F2,Min cycles from sref entry to sref exit for frequency set 2" group.long 0x2398++0x03 line.long 0x00 "DENALI_PI_230,DENALI_PI_230" hexmask.long.tbyte 0x00 0.--20. 1. "PI_TDFI_CTRLUPD_MAX_F0,Defines the DFI tCTRLUPD_MAX timing parameter (in DFI clocks) for frequency set 0 the maximum cycles that dfi_ctrlupd_req can be asserted" group.long 0x239C++0x03 line.long 0x00 "DENALI_PI_231,DENALI_PI_231" hexmask.long 0x00 0.--31. 1. "PI_TDFI_CTRLUPD_INTERVAL_F0,Defines the DFI tCTRLUPD_INTERVAL timing parameter (in DFI clocks) for frequency set 0 the maximum cycles between dfi_ctrlupd_req assertions" group.long 0x23A0++0x03 line.long 0x00 "DENALI_PI_232,DENALI_PI_232" hexmask.long.tbyte 0x00 0.--20. 1. "PI_TDFI_CTRLUPD_MAX_F1,Defines the DFI tCTRLUPD_MAX timing parameter (in DFI clocks) for frequency set 1 the maximum cycles that dfi_ctrlupd_req can be asserted" group.long 0x23A4++0x03 line.long 0x00 "DENALI_PI_233,DENALI_PI_233" hexmask.long 0x00 0.--31. 1. "PI_TDFI_CTRLUPD_INTERVAL_F1,Defines the DFI tCTRLUPD_INTERVAL timing parameter (in DFI clocks) for frequency set 1 the maximum cycles between dfi_ctrlupd_req assertions" group.long 0x23A8++0x03 line.long 0x00 "DENALI_PI_234,DENALI_PI_234" hexmask.long.tbyte 0x00 0.--20. 1. "PI_TDFI_CTRLUPD_MAX_F2,Defines the DFI tCTRLUPD_MAX timing parameter (in DFI clocks) for frequency set 2 the maximum cycles that dfi_ctrlupd_req can be asserted" group.long 0x23AC++0x03 line.long 0x00 "DENALI_PI_235,DENALI_PI_235" hexmask.long 0x00 0.--31. 1. "PI_TDFI_CTRLUPD_INTERVAL_F2,Defines the DFI tCTRLUPD_INTERVAL timing parameter (in DFI clocks) for frequency set 2 the maximum cycles between dfi_ctrlupd_req assertions" group.long 0x23B0++0x03 line.long 0x00 "DENALI_PI_236,DENALI_PI_236" hexmask.long.word 0x00 16.--31. 1. "PI_TXSR_F1,DRAM TXSR value for frequency set 1 in cycles" hexmask.long.word 0x00 0.--15. 1. "PI_TXSR_F0,DRAM TXSR value for frequency set 0 in cycles" group.long 0x23B4++0x03 line.long 0x00 "DENALI_PI_237,DENALI_PI_237" bitfld.long 0x00 24.--29. "PI_TEXCKE_F1,DRAM CKE low after SREF command timing for frequency set 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--21. "PI_TEXCKE_F0,DRAM CKE low after SREF command timing for frequency set 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 0.--15. 1. "PI_TXSR_F2,DRAM TXSR value for frequency set 2 in cycles" group.long 0x23B8++0x03 line.long 0x00 "DENALI_PI_238,DENALI_PI_238" hexmask.long.tbyte 0x00 8.--31. 1. "PI_TINIT_F0,DRAM tINIT value for frequency set 0 in cycles" bitfld.long 0x00 0.--5. "PI_TEXCKE_F2,DRAM CKE low after SREF command timing for frequency set 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x23BC++0x03 line.long 0x00 "DENALI_PI_239,DENALI_PI_239" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT3_F0,DRAM tINIT3 value for frequency set 0 in cycles" group.long 0x23C8++0x03 line.long 0x00 "DENALI_PI_242,DENALI_PI_242" hexmask.long.word 0x00 0.--15. 1. "PI_TXSNR_F0,DRAM tXSNR value for frequency set 0 in cycles" group.long 0x23CC++0x03 line.long 0x00 "DENALI_PI_243,DENALI_PI_243" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT_F1,DRAM tINIT value for frequency set 1 in cycles" group.long 0x23D0++0x03 line.long 0x00 "DENALI_PI_244,DENALI_PI_244" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT3_F1,DRAM tINIT3 value for frequency set 1 in cycles" group.long 0x23D8++0x03 line.long 0x00 "DENALI_PI_246,DENALI_PI_246" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT5_F1,DRAM tINIT5 value for frequency set 1 in cycles" group.long 0x23DC++0x03 line.long 0x00 "DENALI_PI_247,DENALI_PI_247" hexmask.long.word 0x00 0.--15. 1. "PI_TXSNR_F1,DRAM tXSNR value for frequency set 1 in cycles" group.long 0x23E0++0x03 line.long 0x00 "DENALI_PI_248,DENALI_PI_248" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT_F2,DRAM tINIT value for frequency set 2 in cycles" group.long 0x23E4++0x03 line.long 0x00 "DENALI_PI_249,DENALI_PI_249" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT3_F2,DRAM tINIT3 value for frequency set 2 in cycles" group.long 0x23EC++0x03 line.long 0x00 "DENALI_PI_251,DENALI_PI_251" hexmask.long.tbyte 0x00 0.--23. 1. "PI_TINIT5_F2,DRAM tINIT5 value for frequency set 2 in cycles" group.long 0x23F0++0x03 line.long 0x00 "DENALI_PI_252,DENALI_PI_252" hexmask.long.word 0x00 16.--27. 1. "PI_RESERVED50,PI_RESERVED50" hexmask.long.word 0x00 0.--15. 1. "PI_TXSNR_F2,DRAM tXSNR value for frequency set 2 in cycles" group.long 0x23F4++0x03 line.long 0x00 "DENALI_PI_253,DENALI_PI_253" hexmask.long.word 0x00 16.--27. 1. "PI_TZQCAL_F0,Holds the DRAM ZQCAL value for frequency set 0 in cycles" hexmask.long.word 0x00 0.--11. 1. "PI_RESERVED51,PI_RESERVED51" group.long 0x23F8++0x03 line.long 0x00 "DENALI_PI_254,DENALI_PI_254" hexmask.long.word 0x00 8.--19. 1. "PI_RESERVED52,PI_RESERVED52" hexmask.long.byte 0x00 0.--6. 1. "PI_TZQLAT_F0,Holds the DRAM ZQLAT value for frequency set 0 in cycles" group.long 0x23FC++0x03 line.long 0x00 "DENALI_PI_255,DENALI_PI_255" hexmask.long.word 0x00 16.--27. 1. "PI_TZQCAL_F1,Holds the DRAM ZQCAL value for frequency set 1 in cycles" hexmask.long.word 0x00 0.--11. 1. "PI_RESERVED53,PI_RESERVED53" group.long 0x2400++0x03 line.long 0x00 "DENALI_PI_256,DENALI_PI_256" hexmask.long.word 0x00 8.--19. 1. "PI_RESERVED54,PI_RESERVED54" hexmask.long.byte 0x00 0.--6. 1. "PI_TZQLAT_F1,Holds the DRAM ZQLAT value for frequency set 1 in cycles" group.long 0x2404++0x03 line.long 0x00 "DENALI_PI_257,DENALI_PI_257" hexmask.long.word 0x00 16.--27. 1. "PI_TZQCAL_F2,Holds the DRAM ZQCAL value for frequency set 2 in cycles" hexmask.long.word 0x00 0.--11. 1. "PI_RESERVED55,PI_RESERVED55" group.long 0x2408++0x03 line.long 0x00 "DENALI_PI_258,DENALI_PI_258" hexmask.long.word 0x00 8.--19. 1. "PI_RESERVED56,PI_RESERVED56" hexmask.long.byte 0x00 0.--6. 1. "PI_TZQLAT_F2,Holds the DRAM ZQLAT value for frequency set 2 in cycles" group.long 0x2414++0x03 line.long 0x00 "DENALI_PI_261,DENALI_PI_261" bitfld.long 0x00 24.--27. "PI_ODT_WR_MAP_CS1,Determines which chip(s) will have termination when a write occurs on chip select 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PI_ODT_RD_MAP_CS1,Determines which chip(s) will have termination when a read occurs on chip select 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "PI_ODT_WR_MAP_CS0,Determines which chip(s) will have termination when a write occurs on chip select 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "PI_ODT_RD_MAP_CS0,Determines which chip(s) will have termination when a read occurs on chip select 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2454++0x03 line.long 0x00 "DENALI_PI_277,DENALI_PI_277" hexmask.long.byte 0x00 24.--31. 1. "PI_MR11_DATA_F0_0,Data to program into memory mode register 11 for chip select 0 for frequency set 0" hexmask.long.byte 0x00 16.--23. 1. "PI_MR3_DATA_F0_0,Data to program into memory mode register 3 for chip select 0 for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR2_DATA_F0_0,Data to program into memory mode register 2 for chip select 0 for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_MR1_DATA_F0_0,Data to program into memory mode register 1 for chip select 0 for frequency set 0" group.long 0x2458++0x03 line.long 0x00 "DENALI_PI_278,DENALI_PI_278" hexmask.long.byte 0x00 24.--31. 1. "PI_MR1_DATA_F1_0,Data to program into memory mode register 1 for chip select 0 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR22_DATA_F0_0,Data to program into memory mode register 22 for chip select 0 for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR14_DATA_F0_0,Data to program into memory mode register 14 for chip select 0 for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_MR12_DATA_F0_0,Data to program into memory mode register 12 for chip select 0 for frequency set 0" group.long 0x245C++0x03 line.long 0x00 "DENALI_PI_279,DENALI_PI_279" hexmask.long.byte 0x00 24.--31. 1. "PI_MR12_DATA_F1_0,Data to program into memory mode register 12 for chip select 0 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR11_DATA_F1_0,Data to program into memory mode register 11 for chip select 0 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR3_DATA_F1_0,Data to program into memory mode register 3 for chip select 0 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR2_DATA_F1_0,Data to program into memory mode register 2 for chip select 0 for frequency set 1" group.long 0x2460++0x03 line.long 0x00 "DENALI_PI_280,DENALI_PI_280" hexmask.long.byte 0x00 24.--31. 1. "PI_MR2_DATA_F2_0,Data to program into memory mode register 2 for chip select 0 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR1_DATA_F2_0,Data to program into memory mode register 1 for chip select 0 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR22_DATA_F1_0,Data to program into memory mode register 22 for chip select 0 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR14_DATA_F1_0,Data to program into memory mode register 14 for chip select 0 for frequency set 1" group.long 0x2464++0x03 line.long 0x00 "DENALI_PI_281,DENALI_PI_281" hexmask.long.byte 0x00 24.--31. 1. "PI_MR14_DATA_F2_0,Data to program into memory mode register 14 for chip select 0 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR12_DATA_F2_0,Data to program into memory mode register 12 for chip select 0 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR11_DATA_F2_0,Data to program into memory mode register 11 for chip select 0 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR3_DATA_F2_0,Data to program into memory mode register 3 for chip select 0 for frequency set 2" group.long 0x2468++0x03 line.long 0x00 "DENALI_PI_282,DENALI_PI_282" hexmask.long.byte 0x00 24.--31. 1. "PI_MR3_DATA_F0_1,Data to program into memory mode register 3 for chip select 1 for frequency set 0" hexmask.long.byte 0x00 16.--23. 1. "PI_MR2_DATA_F0_1,Data to program into memory mode register 2 for chip select 1 for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR1_DATA_F0_1,Data to program into memory mode register 1 for chip select 1 for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_MR22_DATA_F2_0,Data to program into memory mode register 22 for chip select 0 for frequency set 2" group.long 0x2470++0x03 line.long 0x00 "DENALI_PI_284,DENALI_PI_284" hexmask.long.byte 0x00 24.--31. 1. "PI_MR11_DATA_F1_1,Data to program into memory mode register 11 for chip select 1 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR3_DATA_F1_1,Data to program into memory mode register 3 for chip select 1 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR2_DATA_F1_1,Data to program into memory mode register 2 for chip select 1 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR1_DATA_F1_1,Data to program into memory mode register 1 for chip select 1 for frequency set 1" group.long 0x2474++0x03 line.long 0x00 "DENALI_PI_285,DENALI_PI_285" hexmask.long.byte 0x00 24.--31. 1. "PI_MR1_DATA_F2_1,Data to program into memory mode register 1 for chip select 1 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR22_DATA_F1_1,Data to program into memory mode register 22 for chip select 1 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR14_DATA_F1_1,Data to program into memory mode register 14 for chip select 1 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR12_DATA_F1_1,Data to program into memory mode register 12 for chip select 1 for frequency set 1" group.long 0x2478++0x03 line.long 0x00 "DENALI_PI_286,DENALI_PI_286" hexmask.long.byte 0x00 24.--31. 1. "PI_MR12_DATA_F2_1,Data to program into memory mode register 12 for chip select 1 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR11_DATA_F2_1,Data to program into memory mode register 11 for chip select 1 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR3_DATA_F2_1,Data to program into memory mode register 3 for chip select 1 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR2_DATA_F2_1,Data to program into memory mode register 2 for chip select 1 for frequency set 2" group.long 0x247C++0x03 line.long 0x00 "DENALI_PI_287,DENALI_PI_287" hexmask.long.byte 0x00 24.--31. 1. "PI_MR2_DATA_F0_2,Data to program into memory mode register 2 for chip select 2 for frequency set 0" hexmask.long.byte 0x00 16.--23. 1. "PI_MR1_DATA_F0_2,Data to program into memory mode register 1 for chip select 2 for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR22_DATA_F2_1,Data to program into memory mode register 22 for chip select 1 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR14_DATA_F2_1,Data to program into memory mode register 14 for chip select 1 for frequency set 2" group.long 0x2480++0x03 line.long 0x00 "DENALI_PI_288,DENALI_PI_288" hexmask.long.byte 0x00 24.--31. 1. "PI_MR14_DATA_F0_2,Data to program into memory mode register 14 for chip select 2 for frequency set 0" hexmask.long.byte 0x00 16.--23. 1. "PI_MR12_DATA_F0_2,Data to program into memory mode register 12 for chip select 2 for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR11_DATA_F0_2,Data to program into memory mode register 11 for chip select 2 for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_MR3_DATA_F0_2,Data to program into memory mode register 3 for chip select 2 for frequency set 0" group.long 0x2484++0x03 line.long 0x00 "DENALI_PI_289,DENALI_PI_289" hexmask.long.byte 0x00 24.--31. 1. "PI_MR3_DATA_F1_2,Data to program into memory mode register 3 for chip select 2 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR2_DATA_F1_2,Data to program into memory mode register 2 for chip select 2 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR1_DATA_F1_2,Data to program into memory mode register 1 for chip select 2 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR22_DATA_F0_2,Data to program into memory mode register 22 for chip select 2 for frequency set 0" group.long 0x2488++0x03 line.long 0x00 "DENALI_PI_290,DENALI_PI_290" hexmask.long.byte 0x00 24.--31. 1. "PI_MR22_DATA_F1_2,Data to program into memory mode register 22 for chip select 2 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR14_DATA_F1_2,Data to program into memory mode register 14 for chip select 2 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR12_DATA_F1_2,Data to program into memory mode register 12 for chip select 2 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR11_DATA_F1_2,Data to program into memory mode register 11 for chip select 2 for frequency set 1" group.long 0x248C++0x03 line.long 0x00 "DENALI_PI_291,DENALI_PI_291" hexmask.long.byte 0x00 24.--31. 1. "PI_MR11_DATA_F2_2,Data to program into memory mode register 11 for chip select 2 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR3_DATA_F2_2,Data to program into memory mode register 3 for chip select 2 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR2_DATA_F2_2,Data to program into memory mode register 2 for chip select 2 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR1_DATA_F2_2,Data to program into memory mode register 1 for chip select 2 for frequency set 2" group.long 0x2490++0x03 line.long 0x00 "DENALI_PI_292,DENALI_PI_292" hexmask.long.byte 0x00 24.--31. 1. "PI_MR1_DATA_F0_3,Data to program into memory mode register 1 for chip select 3 for frequency set 0" hexmask.long.byte 0x00 16.--23. 1. "PI_MR22_DATA_F2_2,Data to program into memory mode register 22 for chip select 2 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR14_DATA_F2_2,Data to program into memory mode register 14 for chip select 2 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR12_DATA_F2_2,Data to program into memory mode register 12 for chip select 2 for frequency set 2" group.long 0x2494++0x03 line.long 0x00 "DENALI_PI_293,DENALI_PI_293" hexmask.long.byte 0x00 24.--31. 1. "PI_MR12_DATA_F0_3,Data to program into memory mode register 12 for chip select 3 for frequency set 0" hexmask.long.byte 0x00 16.--23. 1. "PI_MR11_DATA_F0_3,Data to program into memory mode register 11 for chip select 3 for frequency set 0" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR3_DATA_F0_3,Data to program into memory mode register 3 for chip select 3 for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_MR2_DATA_F0_3,Data to program into memory mode register 2 for chip select 3 for frequency set 0" group.long 0x2498++0x03 line.long 0x00 "DENALI_PI_294,DENALI_PI_294" hexmask.long.byte 0x00 24.--31. 1. "PI_MR2_DATA_F1_3,Data to program into memory mode register 2 for chip select 3 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR1_DATA_F1_3,Data to program into memory mode register 1 for chip select 3 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR22_DATA_F0_3,Data to program into memory mode register 22 for chip select 3 for frequency set 0" hexmask.long.byte 0x00 0.--7. 1. "PI_MR14_DATA_F0_3,Data to program into memory mode register 14 for chip select 3 for frequency set 0" group.long 0x249C++0x03 line.long 0x00 "DENALI_PI_295,DENALI_PI_295" hexmask.long.byte 0x00 24.--31. 1. "PI_MR14_DATA_F1_3,Data to program into memory mode register 14 for chip select 3 for frequency set 1" hexmask.long.byte 0x00 16.--23. 1. "PI_MR12_DATA_F1_3,Data to program into memory mode register 12 for chip select 3 for frequency set 1" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR11_DATA_F1_3,Data to program into memory mode register 11 for chip select 3 for frequency set 1" hexmask.long.byte 0x00 0.--7. 1. "PI_MR3_DATA_F1_3,Data to program into memory mode register 3 for chip select 3 for frequency set 1" group.long 0x24A0++0x03 line.long 0x00 "DENALI_PI_296,DENALI_PI_296" hexmask.long.byte 0x00 24.--31. 1. "PI_MR3_DATA_F2_3,Data to program into memory mode register 3 for chip select 3 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR2_DATA_F2_3,Data to program into memory mode register 2 for chip select 3 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR1_DATA_F2_3,Data to program into memory mode register 1 for chip select 3 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR22_DATA_F1_3,Data to program into memory mode register 22 for chip select 3 for frequency set 1" group.long 0x24A4++0x03 line.long 0x00 "DENALI_PI_297,DENALI_PI_297" hexmask.long.byte 0x00 24.--31. 1. "PI_MR22_DATA_F2_3,Data to program into memory mode register 22 for chip select 3 for frequency set 2" hexmask.long.byte 0x00 16.--23. 1. "PI_MR14_DATA_F2_3,Data to program into memory mode register 14 for chip select 3 for frequency set 2" newline hexmask.long.byte 0x00 8.--15. 1. "PI_MR12_DATA_F2_3,Data to program into memory mode register 12 for chip select 3 for frequency set 2" hexmask.long.byte 0x00 0.--7. 1. "PI_MR11_DATA_F2_3,Data to program into memory mode register 11 for chip select 3 for frequency set 2" group.long 0x407C++0x03 line.long 0x00 "DENALI_PHY_31,DENALI_PHY_31" bitfld.long 0x00 24.--27. "PHY_GTLVL_UPDT_WAIT_CNT_0,Number of cycles + 4 to wait after changing DQS slave delay setting during gate training for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--21. "PHY_GTLVL_CAPTURE_CNT_0,Number of samples to take at each DQS slave delay setting during gate training for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_MASK_0,For ECC slice should set this register to do DQ bit mask for slice 0" bitfld.long 0x00 0.--3. "PHY_WRLVL_UPDT_WAIT_CNT_0,Number of cycles to wait after changing DQS slave delay setting during write leveling for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4084++0x03 line.long 0x00 "DENALI_PHY_33,DENALI_PHY_33" bitfld.long 0x00 24.--26. "PHY_WDQLVL_PATT_0,Defines the training patterns to be used during the write data leveling sequence for slice 0" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--21. "PHY_WDQLVL_BURST_CNT_0,Defines the write/read burst length in bytes during the write data leveling sequence for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_WDQLVL_CLK_JITTER_TOLERANCE_0,Defines the minimum gap requirment for the LE and TE window for slice 0" hexmask.long.byte 0x00 0.--7. 1. "PHY_RDLVL_DATA_MASK_0,Per-bit mask for read leveling for slice 0" group.long 0x4120++0x03 line.long 0x00 "DENALI_PHY_72,DENALI_PHY_72" bitfld.long 0x00 24. "PHY_SLICE_PWR_RDC_DISABLE_0,Data slice power reduction disable for slice 0" "0,1" bitfld.long 0x00 16. "PHY_DCC_RXCAL_CTRL_GATE_DISABLE_0,Data slice RX_CAL block power reduction disable for slice 0" "0,1" newline bitfld.long 0x00 8. "PHY_RDPATH_GATE_DISABLE_0,Data slice read path power reduction disable for slice 0" "0,1" bitfld.long 0x00 0. "PHY_SLV_DLY_CTRL_GATE_DISABLE_0,Data slice slv_dly_control block power reduction disable for slice 0" "0,1" group.long 0x4124++0x03 line.long 0x00 "DENALI_PHY_73,DENALI_PHY_73" bitfld.long 0x00 24.--26. "PHY_DQS_TSEL_ENABLE_0,Operation type tsel enables for DQS signals for slice 0" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 8.--23. 1. "PHY_DQ_TSEL_SELECT_0,Operation type tsel select values for DQ/DM signals for slice 0" newline bitfld.long 0x00 0.--2. "PHY_DQ_TSEL_ENABLE_0,Operation type tsel enables for DQ/DM signals for slice 0" "0,1,2,3,4,5,6,7" group.long 0x4128++0x03 line.long 0x00 "DENALI_PHY_74,DENALI_PHY_74" hexmask.long.byte 0x00 24.--30. 1. "PHY_VREF_INITIAL_START_POINT_0,Data slice initial VREF training start value for slice 0" bitfld.long 0x00 16.--17. "PHY_TWO_CYC_PREAMBLE_0,2 cycle preamble support for slice 0" "0,1,2,3" newline hexmask.long.word 0x00 0.--15. 1. "PHY_DQS_TSEL_SELECT_0,Operation type tsel select values for DQS signals for slice 0" group.long 0x412C++0x03 line.long 0x00 "DENALI_PHY_75,DENALI_PHY_75" hexmask.long.byte 0x00 24.--31. 1. "PHY_NTP_WDQ_STEP_SIZE_0,Step size of WR DQ slave delay during No-Topology training for slice 0" bitfld.long 0x00 16. "PHY_NTP_TRAIN_EN_0,Enable for No-Topology training for slice 0" "0,1" newline bitfld.long 0x00 8.--9. "PHY_VREF_TRAINING_CTRL_0,Data slice vref training enable control for slice 0" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. "PHY_VREF_INITIAL_STOP_POINT_0,Data slice initial VREF training stop value for slice 0" group.long 0x4140++0x03 line.long 0x00 "DENALI_PHY_80,DENALI_PHY_80" hexmask.long.byte 0x00 16.--22. 1. "PHY_PAD_DSLICE_IO_CFG_0,Controls PCLK/PARK pin for pad for slice 0" bitfld.long 0x00 8.--12. "PHY_PAD_FDBK_RX_DCD_0,Controls RX_DCD pin for fdbk pad for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "PHY_PAD_DQS_RX_DCD_0,Controls RX_DCD pin for dqs pad for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4160++0x03 line.long 0x00 "DENALI_PHY_88,DENALI_PHY_88" hexmask.long.word 0x00 16.--27. 1. "PHY_PAD_VREF_CTRL_DQ_0,Pad VREF control settings for DQ slice 0" hexmask.long.word 0x00 0.--15. 1. "PHY_VREF_SETTING_TIME_0,Number of cycles for vref settle after setting is changed for slice 0" group.long 0x4164++0x03 line.long 0x00 "DENALI_PHY_89,DENALI_PHY_89" bitfld.long 0x00 24.--25. "PHY_RDDATA_EN_IE_DLY_0,Number of cycles that the dfi_rddata_en signal is earlier than necessary for input enable generation for slice 0" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. "PHY_DQS_IE_TIMING_0,Start/end timing values for DQS input enable signals for slice 0" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_IE_TIMING_0,Start/end timing values for DQ/DM input enable signals for slice 0" bitfld.long 0x00 0. "PHY_PER_CS_TRAINING_EN_0,Enables the per-rank training and read/write timing capabilities for slice 0" "0,1" group.long 0x4168++0x03 line.long 0x00 "DENALI_PHY_90,DENALI_PHY_90" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_OE_DLY_0,Number of cycles that the dfi_rddata_en signal is earlier than necessary for LP4 OE extension generation for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "PHY_RDDATA_EN_TSEL_DLY_0,Number of cycles that the dfi_rddata_en signal is earlier than necessary for TSEL enable generation for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "PHY_DBI_MODE_0,DBI mode for slice 0" "0,1" bitfld.long 0x00 0.--1. "PHY_IE_MODE_0,Input enable mode bits for slice 0" "0,1,2,3" group.long 0x4170++0x03 line.long 0x00 "DENALI_PHY_92,DENALI_PHY_92" hexmask.long.byte 0x00 24.--31. 1. "PHY_WRLVL_DLY_STEP_0,DQS slave delay step size during write leveling for slice 0" bitfld.long 0x00 16.--19. "PHY_RPTR_UPDATE_0,Offset in cycles from the dfi_rddata_en signal to release data from the entry FIFO for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_MASTER_DELAY_HALF_MEASURE_0,Defines the number of delay line elements to be considered in determing whether to lock to a half clock cycle in the data slice master for slice 0" hexmask.long.byte 0x00 0.--7. 1. "PHY_MASTER_DELAY_WAIT_0,Wait cycles for master delay line locking algorithm for slice 0" group.long 0x4174++0x03 line.long 0x00 "DENALI_PHY_93,DENALI_PHY_93" bitfld.long 0x00 24.--28. "PHY_GTLVL_RESP_WAIT_CNT_0,Number of cycles + 4 to wait between dfi_rddata_en and the sampling of the DQS during gate training for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--19. "PHY_GTLVL_DLY_STEP_0,DQS slave delay step size during gate training for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--13. "PHY_WRLVL_RESP_WAIT_CNT_0,Number of cycles to wait between dfi_wrlvl_strobe and the sampling of the DQs during write leveling for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. "PHY_WRLVL_DLY_FINE_STEP_0,DQS slave delay fine step size during write leveling for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4180++0x03 line.long 0x00 "DENALI_PHY_96,DENALI_PHY_96" hexmask.long.word 0x00 0.--9. 1. "PHY_RDLVL_MAX_EDGE_0,The maximun rdlvl slave delay search window for read eye training for slice 0" group.long 0x4184++0x03 line.long 0x00 "DENALI_PHY_97,DENALI_PHY_97" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_DLY_0,Number of cycles that the dfi_rddata_en signal is early for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--21. "PHY_MEAS_DLY_STEP_ENABLE_0,Data slice training step definition using phy_meas_dly_step_value for slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--10. "PHY_WRPATH_GATE_TIMING_0,Write path clock gating timing for slice 0" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--1. "PHY_WRPATH_GATE_DISABLE_0,Write path clock gating disable for slice 0" "0,1,2,3" group.long 0x4188++0x03 line.long 0x00 "DENALI_PHY_98,DENALI_PHY_98" hexmask.long 0x00 0.--31. 1. "PHY_DQ_DM_SWIZZLE0_0,DQ/DM bit swizzling 0 for slice 0" group.long 0x4190++0x03 line.long 0x00 "DENALI_PHY_100,DENALI_PHY_100" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ1_SLAVE_DELAY_0,Write clock slave delay setting for DQ1 for slice 0" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ0_SLAVE_DELAY_0,Write clock slave delay setting for DQ0 for slice 0" group.long 0x4194++0x03 line.long 0x00 "DENALI_PHY_101,DENALI_PHY_101" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ3_SLAVE_DELAY_0,Write clock slave delay setting for DQ3 for slice 0" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ2_SLAVE_DELAY_0,Write clock slave delay setting for DQ2 for slice 0" group.long 0x4198++0x03 line.long 0x00 "DENALI_PHY_102,DENALI_PHY_102" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ5_SLAVE_DELAY_0,Write clock slave delay setting for DQ5 for slice 0" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ4_SLAVE_DELAY_0,Write clock slave delay setting for DQ4 for slice 0" group.long 0x419C++0x03 line.long 0x00 "DENALI_PHY_103,DENALI_PHY_103" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ7_SLAVE_DELAY_0,Write clock slave delay setting for DQ7 for slice 0" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ6_SLAVE_DELAY_0,Write clock slave delay setting for DQ6 for slice 0" group.long 0x41A0++0x03 line.long 0x00 "DENALI_PHY_104,DENALI_PHY_104" hexmask.long.word 0x00 16.--25. 1. "PHY_CLK_WRDQS_SLAVE_DELAY_0,Write clock slave delay setting for DQS for slice 0" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDM_SLAVE_DELAY_0,Write clock slave delay setting for DM for slice 0" group.long 0x41C8++0x03 line.long 0x00 "DENALI_PHY_114,DENALI_PHY_114" hexmask.long.word 0x00 16.--25. 1. "PHY_RDDQS_GATE_SLAVE_DELAY_0,Read DQS slave delay setting for slice 0" hexmask.long.word 0x00 0.--9. 1. "PHY_RDDQS_DM_FALL_SLAVE_DELAY_0,Falling edge read DQS slave delay setting for DM for slice 0" group.long 0x447C++0x03 line.long 0x00 "DENALI_PHY_287,DENALI_PHY_287" bitfld.long 0x00 24.--27. "PHY_GTLVL_UPDT_WAIT_CNT_1,Number of cycles + 4 to wait after changing DQS slave delay setting during gate training for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--21. "PHY_GTLVL_CAPTURE_CNT_1,Number of samples to take at each DQS slave delay setting during gate training for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_MASK_1,For ECC slice should set this register to do DQ bit mask for slice 1" bitfld.long 0x00 0.--3. "PHY_WRLVL_UPDT_WAIT_CNT_1,Number of cycles to wait after changing DQS slave delay setting during write leveling for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4484++0x03 line.long 0x00 "DENALI_PHY_289,DENALI_PHY_289" bitfld.long 0x00 24.--26. "PHY_WDQLVL_PATT_1,Defines the training patterns to be used during the write data leveling sequence for slice 1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--21. "PHY_WDQLVL_BURST_CNT_1,Defines the write/read burst length in bytes during the write data leveling sequence for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_WDQLVL_CLK_JITTER_TOLERANCE_1,Defines the minimum gap requirment for the LE and TE window for slice 1" hexmask.long.byte 0x00 0.--7. 1. "PHY_RDLVL_DATA_MASK_1,Per-bit mask for read leveling for slice 1" group.long 0x4520++0x03 line.long 0x00 "DENALI_PHY_328,DENALI_PHY_328" bitfld.long 0x00 24. "PHY_SLICE_PWR_RDC_DISABLE_1,Data slice power reduction disable for slice 1" "0,1" bitfld.long 0x00 16. "PHY_DCC_RXCAL_CTRL_GATE_DISABLE_1,Data slice RX_CAL block power reduction disable for slice 1" "0,1" newline bitfld.long 0x00 8. "PHY_RDPATH_GATE_DISABLE_1,Data slice read path power reduction disable for slice 1" "0,1" bitfld.long 0x00 0. "PHY_SLV_DLY_CTRL_GATE_DISABLE_1,Data slice slv_dly_control block power reduction disable for slice 1" "0,1" group.long 0x4524++0x03 line.long 0x00 "DENALI_PHY_329,DENALI_PHY_329" bitfld.long 0x00 24.--26. "PHY_DQS_TSEL_ENABLE_1,Operation type tsel enables for DQS signals for slice 1" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 8.--23. 1. "PHY_DQ_TSEL_SELECT_1,Operation type tsel select values for DQ/DM signals for slice 1" newline bitfld.long 0x00 0.--2. "PHY_DQ_TSEL_ENABLE_1,Operation type tsel enables for DQ/DM signals for slice 1" "0,1,2,3,4,5,6,7" group.long 0x4528++0x03 line.long 0x00 "DENALI_PHY_330,DENALI_PHY_330" hexmask.long.byte 0x00 24.--30. 1. "PHY_VREF_INITIAL_START_POINT_1,Data slice initial VREF training start value for slice 1" bitfld.long 0x00 16.--17. "PHY_TWO_CYC_PREAMBLE_1,2 cycle preamble support for slice 1" "0,1,2,3" newline hexmask.long.word 0x00 0.--15. 1. "PHY_DQS_TSEL_SELECT_1,Operation type tsel select values for DQS signals for slice 1" group.long 0x452C++0x03 line.long 0x00 "DENALI_PHY_331,DENALI_PHY_331" hexmask.long.byte 0x00 24.--31. 1. "PHY_NTP_WDQ_STEP_SIZE_1,Step size of WR DQ slave delay during No-Topology training for slice 1" bitfld.long 0x00 16. "PHY_NTP_TRAIN_EN_1,Enable for No-Topology training for slice 1" "0,1" newline bitfld.long 0x00 8.--9. "PHY_VREF_TRAINING_CTRL_1,Data slice vref training enable control for slice 1" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. "PHY_VREF_INITIAL_STOP_POINT_1,Data slice initial VREF training stop value for slice 1" group.long 0x4540++0x03 line.long 0x00 "DENALI_PHY_336,DENALI_PHY_336" hexmask.long.byte 0x00 16.--22. 1. "PHY_PAD_DSLICE_IO_CFG_1,Controls PCLK/PARK pin for pad for slice 1" bitfld.long 0x00 8.--12. "PHY_PAD_FDBK_RX_DCD_1,Controls RX_DCD pin for fdbk pad for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "PHY_PAD_DQS_RX_DCD_1,Controls RX_DCD pin for dqs pad for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4560++0x03 line.long 0x00 "DENALI_PHY_344,DENALI_PHY_344" hexmask.long.word 0x00 16.--27. 1. "PHY_PAD_VREF_CTRL_DQ_1,Pad VREF control settings for DQ slice 1" hexmask.long.word 0x00 0.--15. 1. "PHY_VREF_SETTING_TIME_1,Number of cycles for vref settle after setting is changed for slice 1" group.long 0x4564++0x03 line.long 0x00 "DENALI_PHY_345,DENALI_PHY_345" bitfld.long 0x00 24.--25. "PHY_RDDATA_EN_IE_DLY_1,Number of cycles that the dfi_rddata_en signal is earlier than necessary for input enable generation for slice 1" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. "PHY_DQS_IE_TIMING_1,Start/end timing values for DQS input enable signals for slice 1" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_IE_TIMING_1,Start/end timing values for DQ/DM input enable signals for slice 1" bitfld.long 0x00 0. "PHY_PER_CS_TRAINING_EN_1,Enables the per-rank training and read/write timing capabilities for slice 1" "0,1" group.long 0x4568++0x03 line.long 0x00 "DENALI_PHY_346,DENALI_PHY_346" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_OE_DLY_1,Number of cycles that the dfi_rddata_en signal is earlier than necessary for LP4 OE extension generation for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "PHY_RDDATA_EN_TSEL_DLY_1,Number of cycles that the dfi_rddata_en signal is earlier than necessary for TSEL enable generation for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "PHY_DBI_MODE_1,DBI mode for slice 1" "0,1" bitfld.long 0x00 0.--1. "PHY_IE_MODE_1,Input enable mode bits for slice 1" "0,1,2,3" group.long 0x4570++0x03 line.long 0x00 "DENALI_PHY_348,DENALI_PHY_348" hexmask.long.byte 0x00 24.--31. 1. "PHY_WRLVL_DLY_STEP_1,DQS slave delay step size during write leveling for slice 1" bitfld.long 0x00 16.--19. "PHY_RPTR_UPDATE_1,Offset in cycles from the dfi_rddata_en signal to release data from the entry FIFO for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_MASTER_DELAY_HALF_MEASURE_1,Defines the number of delay line elements to be considered in determing whether to lock to a half clock cycle in the data slice master for slice 1" hexmask.long.byte 0x00 0.--7. 1. "PHY_MASTER_DELAY_WAIT_1,Wait cycles for master delay line locking algorithm for slice 1" group.long 0x4574++0x03 line.long 0x00 "DENALI_PHY_349,DENALI_PHY_349" bitfld.long 0x00 24.--28. "PHY_GTLVL_RESP_WAIT_CNT_1,Number of cycles + 4 to wait between dfi_rddata_en and the sampling of the DQS during gate training for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--19. "PHY_GTLVL_DLY_STEP_1,DQS slave delay step size during gate training for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--13. "PHY_WRLVL_RESP_WAIT_CNT_1,Number of cycles to wait between dfi_wrlvl_strobe and the sampling of the DQs during write leveling for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. "PHY_WRLVL_DLY_FINE_STEP_1,DQS slave delay fine step size during write leveling for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4580++0x03 line.long 0x00 "DENALI_PHY_352,DENALI_PHY_352" hexmask.long.word 0x00 0.--9. 1. "PHY_RDLVL_MAX_EDGE_1,The maximun rdlvl slave delay search window for read eye training for slice 1" group.long 0x4584++0x03 line.long 0x00 "DENALI_PHY_353,DENALI_PHY_353" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_DLY_1,Number of cycles that the dfi_rddata_en signal is early for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--21. "PHY_MEAS_DLY_STEP_ENABLE_1,Data slice training step definition using phy_meas_dly_step_value for slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--10. "PHY_WRPATH_GATE_TIMING_1,Write path clock gating timing for slice 1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--1. "PHY_WRPATH_GATE_DISABLE_1,Write path clock gating disable for slice 1" "0,1,2,3" group.long 0x4588++0x03 line.long 0x00 "DENALI_PHY_354,DENALI_PHY_354" hexmask.long 0x00 0.--31. 1. "PHY_DQ_DM_SWIZZLE0_1,DQ/DM bit swizzling 0 for slice 1" group.long 0x4590++0x03 line.long 0x00 "DENALI_PHY_356,DENALI_PHY_356" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ1_SLAVE_DELAY_1,Write clock slave delay setting for DQ1 for slice 1" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ0_SLAVE_DELAY_1,Write clock slave delay setting for DQ0 for slice 1" group.long 0x4594++0x03 line.long 0x00 "DENALI_PHY_357,DENALI_PHY_357" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ3_SLAVE_DELAY_1,Write clock slave delay setting for DQ3 for slice 1" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ2_SLAVE_DELAY_1,Write clock slave delay setting for DQ2 for slice 1" group.long 0x4598++0x03 line.long 0x00 "DENALI_PHY_358,DENALI_PHY_358" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ5_SLAVE_DELAY_1,Write clock slave delay setting for DQ5 for slice 1" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ4_SLAVE_DELAY_1,Write clock slave delay setting for DQ4 for slice 1" group.long 0x459C++0x03 line.long 0x00 "DENALI_PHY_359,DENALI_PHY_359" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ7_SLAVE_DELAY_1,Write clock slave delay setting for DQ7 for slice 1" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ6_SLAVE_DELAY_1,Write clock slave delay setting for DQ6 for slice 1" group.long 0x45A0++0x03 line.long 0x00 "DENALI_PHY_360,DENALI_PHY_360" hexmask.long.word 0x00 16.--25. 1. "PHY_CLK_WRDQS_SLAVE_DELAY_1,Write clock slave delay setting for DQS for slice 1" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDM_SLAVE_DELAY_1,Write clock slave delay setting for DM for slice 1" group.long 0x45C8++0x03 line.long 0x00 "DENALI_PHY_370,DENALI_PHY_370" hexmask.long.word 0x00 16.--25. 1. "PHY_RDDQS_GATE_SLAVE_DELAY_1,Read DQS slave delay setting for slice 1" hexmask.long.word 0x00 0.--9. 1. "PHY_RDDQS_DM_FALL_SLAVE_DELAY_1,Falling edge read DQS slave delay setting for DM for slice 1" group.long 0x487C++0x03 line.long 0x00 "DENALI_PHY_543,DENALI_PHY_543" bitfld.long 0x00 24.--27. "PHY_GTLVL_UPDT_WAIT_CNT_2,Number of cycles + 4 to wait after changing DQS slave delay setting during gate training for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--21. "PHY_GTLVL_CAPTURE_CNT_2,Number of samples to take at each DQS slave delay setting during gate training for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_MASK_2,For ECC slice should set this register to do DQ bit mask for slice 2" bitfld.long 0x00 0.--3. "PHY_WRLVL_UPDT_WAIT_CNT_2,Number of cycles to wait after changing DQS slave delay setting during write leveling for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4884++0x03 line.long 0x00 "DENALI_PHY_545,DENALI_PHY_545" bitfld.long 0x00 24.--26. "PHY_WDQLVL_PATT_2,Defines the training patterns to be used during the write data leveling sequence for slice 2" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--21. "PHY_WDQLVL_BURST_CNT_2,Defines the write/read burst length in bytes during the write data leveling sequence for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_WDQLVL_CLK_JITTER_TOLERANCE_2,Defines the minimum gap requirment for the LE and TE window for slice 2" hexmask.long.byte 0x00 0.--7. 1. "PHY_RDLVL_DATA_MASK_2,Per-bit mask for read leveling for slice 2" group.long 0x4920++0x03 line.long 0x00 "DENALI_PHY_584,DENALI_PHY_584" bitfld.long 0x00 24. "PHY_SLICE_PWR_RDC_DISABLE_2,Data slice power reduction disable for slice 2" "0,1" bitfld.long 0x00 16. "PHY_DCC_RXCAL_CTRL_GATE_DISABLE_2,Data slice RX_CAL block power reduction disable for slice 2" "0,1" newline bitfld.long 0x00 8. "PHY_RDPATH_GATE_DISABLE_2,Data slice read path power reduction disable for slice 2" "0,1" bitfld.long 0x00 0. "PHY_SLV_DLY_CTRL_GATE_DISABLE_2,Data slice slv_dly_control block power reduction disable for slice 2" "0,1" group.long 0x4924++0x03 line.long 0x00 "DENALI_PHY_585,DENALI_PHY_585" bitfld.long 0x00 24.--26. "PHY_DQS_TSEL_ENABLE_2,Operation type tsel enables for DQS signals for slice 2" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 8.--23. 1. "PHY_DQ_TSEL_SELECT_2,Operation type tsel select values for DQ/DM signals for slice 2" newline bitfld.long 0x00 0.--2. "PHY_DQ_TSEL_ENABLE_2,Operation type tsel enables for DQ/DM signals for slice 2" "0,1,2,3,4,5,6,7" group.long 0x4928++0x03 line.long 0x00 "DENALI_PHY_586,DENALI_PHY_586" hexmask.long.byte 0x00 24.--30. 1. "PHY_VREF_INITIAL_START_POINT_2,Data slice initial VREF training start value for slice 2" bitfld.long 0x00 16.--17. "PHY_TWO_CYC_PREAMBLE_2,2 cycle preamble support for slice 2" "0,1,2,3" newline hexmask.long.word 0x00 0.--15. 1. "PHY_DQS_TSEL_SELECT_2,Operation type tsel select values for DQS signals for slice 2" group.long 0x492C++0x03 line.long 0x00 "DENALI_PHY_587,DENALI_PHY_587" hexmask.long.byte 0x00 24.--31. 1. "PHY_NTP_WDQ_STEP_SIZE_2,Step size of WR DQ slave delay during No-Topology training for slice 2" bitfld.long 0x00 16. "PHY_NTP_TRAIN_EN_2,Enable for No-Topology training for slice 2" "0,1" newline bitfld.long 0x00 8.--9. "PHY_VREF_TRAINING_CTRL_2,Data slice vref training enable control for slice 2" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. "PHY_VREF_INITIAL_STOP_POINT_2,Data slice initial VREF training stop value for slice 2" group.long 0x4940++0x03 line.long 0x00 "DENALI_PHY_592,DENALI_PHY_592" hexmask.long.byte 0x00 16.--22. 1. "PHY_PAD_DSLICE_IO_CFG_2,Controls PCLK/PARK pin for pad for slice 2" bitfld.long 0x00 8.--12. "PHY_PAD_FDBK_RX_DCD_2,Controls RX_DCD pin for fdbk pad for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "PHY_PAD_DQS_RX_DCD_2,Controls RX_DCD pin for dqs pad for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4960++0x03 line.long 0x00 "DENALI_PHY_600,DENALI_PHY_600" hexmask.long.word 0x00 16.--27. 1. "PHY_PAD_VREF_CTRL_DQ_2,Pad VREF control settings for DQ slice 2" hexmask.long.word 0x00 0.--15. 1. "PHY_VREF_SETTING_TIME_2,Number of cycles for vref settle after setting is changed for slice 2" group.long 0x4964++0x03 line.long 0x00 "DENALI_PHY_601,DENALI_PHY_601" bitfld.long 0x00 24.--25. "PHY_RDDATA_EN_IE_DLY_2,Number of cycles that the dfi_rddata_en signal is earlier than necessary for input enable generation for slice 2" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. "PHY_DQS_IE_TIMING_2,Start/end timing values for DQS input enable signals for slice 2" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_IE_TIMING_2,Start/end timing values for DQ/DM input enable signals for slice 2" bitfld.long 0x00 0. "PHY_PER_CS_TRAINING_EN_2,Enables the per-rank training and read/write timing capabilities for slice 2" "0,1" group.long 0x4968++0x03 line.long 0x00 "DENALI_PHY_602,DENALI_PHY_602" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_OE_DLY_2,Number of cycles that the dfi_rddata_en signal is earlier than necessary for LP4 OE extension generation for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "PHY_RDDATA_EN_TSEL_DLY_2,Number of cycles that the dfi_rddata_en signal is earlier than necessary for TSEL enable generation for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "PHY_DBI_MODE_2,DBI mode for slice 2" "0,1" bitfld.long 0x00 0.--1. "PHY_IE_MODE_2,Input enable mode bits for slice 2" "0,1,2,3" group.long 0x4970++0x03 line.long 0x00 "DENALI_PHY_604,DENALI_PHY_604" hexmask.long.byte 0x00 24.--31. 1. "PHY_WRLVL_DLY_STEP_2,DQS slave delay step size during write leveling for slice 2" bitfld.long 0x00 16.--19. "PHY_RPTR_UPDATE_2,Offset in cycles from the dfi_rddata_en signal to release data from the entry FIFO for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_MASTER_DELAY_HALF_MEASURE_2,Defines the number of delay line elements to be considered in determing whether to lock to a half clock cycle in the data slice master for slice 2" hexmask.long.byte 0x00 0.--7. 1. "PHY_MASTER_DELAY_WAIT_2,Wait cycles for master delay line locking algorithm for slice 2" group.long 0x4974++0x03 line.long 0x00 "DENALI_PHY_605,DENALI_PHY_605" bitfld.long 0x00 24.--28. "PHY_GTLVL_RESP_WAIT_CNT_2,Number of cycles + 4 to wait between dfi_rddata_en and the sampling of the DQS during gate training for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--19. "PHY_GTLVL_DLY_STEP_2,DQS slave delay step size during gate training for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--13. "PHY_WRLVL_RESP_WAIT_CNT_2,Number of cycles to wait between dfi_wrlvl_strobe and the sampling of the DQs during write leveling for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. "PHY_WRLVL_DLY_FINE_STEP_2,DQS slave delay fine step size during write leveling for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4980++0x03 line.long 0x00 "DENALI_PHY_608,DENALI_PHY_608" hexmask.long.word 0x00 0.--9. 1. "PHY_RDLVL_MAX_EDGE_2,The maximun rdlvl slave delay search window for read eye training for slice 2" group.long 0x4984++0x03 line.long 0x00 "DENALI_PHY_609,DENALI_PHY_609" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_DLY_2,Number of cycles that the dfi_rddata_en signal is early for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--21. "PHY_MEAS_DLY_STEP_ENABLE_2,Data slice training step definition using phy_meas_dly_step_value for slice 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--10. "PHY_WRPATH_GATE_TIMING_2,Write path clock gating timing for slice 2" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--1. "PHY_WRPATH_GATE_DISABLE_2,Write path clock gating disable for slice 2" "0,1,2,3" group.long 0x4988++0x03 line.long 0x00 "DENALI_PHY_610,DENALI_PHY_610" hexmask.long 0x00 0.--31. 1. "PHY_DQ_DM_SWIZZLE0_2,DQ/DM bit swizzling 0 for slice 2" group.long 0x4990++0x03 line.long 0x00 "DENALI_PHY_612,DENALI_PHY_612" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ1_SLAVE_DELAY_2,Write clock slave delay setting for DQ1 for slice 2" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ0_SLAVE_DELAY_2,Write clock slave delay setting for DQ0 for slice 2" group.long 0x4994++0x03 line.long 0x00 "DENALI_PHY_613,DENALI_PHY_613" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ3_SLAVE_DELAY_2,Write clock slave delay setting for DQ3 for slice 2" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ2_SLAVE_DELAY_2,Write clock slave delay setting for DQ2 for slice 2" group.long 0x4998++0x03 line.long 0x00 "DENALI_PHY_614,DENALI_PHY_614" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ5_SLAVE_DELAY_2,Write clock slave delay setting for DQ5 for slice 2" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ4_SLAVE_DELAY_2,Write clock slave delay setting for DQ4 for slice 2" group.long 0x499C++0x03 line.long 0x00 "DENALI_PHY_615,DENALI_PHY_615" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ7_SLAVE_DELAY_2,Write clock slave delay setting for DQ7 for slice 2" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ6_SLAVE_DELAY_2,Write clock slave delay setting for DQ6 for slice 2" group.long 0x49A0++0x03 line.long 0x00 "DENALI_PHY_616,DENALI_PHY_616" hexmask.long.word 0x00 16.--25. 1. "PHY_CLK_WRDQS_SLAVE_DELAY_2,Write clock slave delay setting for DQS for slice 2" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDM_SLAVE_DELAY_2,Write clock slave delay setting for DM for slice 2" group.long 0x49C8++0x03 line.long 0x00 "DENALI_PHY_626,DENALI_PHY_626" hexmask.long.word 0x00 16.--25. 1. "PHY_RDDQS_GATE_SLAVE_DELAY_2,Read DQS slave delay setting for slice 2" hexmask.long.word 0x00 0.--9. 1. "PHY_RDDQS_DM_FALL_SLAVE_DELAY_2,Falling edge read DQS slave delay setting for DM for slice 2" group.long 0x4C7C++0x03 line.long 0x00 "DENALI_PHY_799,DENALI_PHY_799" bitfld.long 0x00 24.--27. "PHY_GTLVL_UPDT_WAIT_CNT_3,Number of cycles + 4 to wait after changing DQS slave delay setting during gate training for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--21. "PHY_GTLVL_CAPTURE_CNT_3,Number of samples to take at each DQS slave delay setting during gate training for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_MASK_3,For ECC slice should set this register to do DQ bit mask for slice 3" bitfld.long 0x00 0.--3. "PHY_WRLVL_UPDT_WAIT_CNT_3,Number of cycles to wait after changing DQS slave delay setting during write leveling for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4C84++0x03 line.long 0x00 "DENALI_PHY_801,DENALI_PHY_801" bitfld.long 0x00 24.--26. "PHY_WDQLVL_PATT_3,Defines the training patterns to be used during the write data leveling sequence for slice 3" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--21. "PHY_WDQLVL_BURST_CNT_3,Defines the write/read burst length in bytes during the write data leveling sequence for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_WDQLVL_CLK_JITTER_TOLERANCE_3,Defines the minimum gap requirment for the LE and TE window for slice 3" hexmask.long.byte 0x00 0.--7. 1. "PHY_RDLVL_DATA_MASK_3,Per-bit mask for read leveling for slice 3" group.long 0x4D20++0x03 line.long 0x00 "DENALI_PHY_840,DENALI_PHY_840" bitfld.long 0x00 24. "PHY_SLICE_PWR_RDC_DISABLE_3,Data slice power reduction disable for slice 3" "0,1" bitfld.long 0x00 16. "PHY_DCC_RXCAL_CTRL_GATE_DISABLE_3,Data slice RX_CAL block power reduction disable for slice 3" "0,1" newline bitfld.long 0x00 8. "PHY_RDPATH_GATE_DISABLE_3,Data slice read path power reduction disable for slice 3" "0,1" bitfld.long 0x00 0. "PHY_SLV_DLY_CTRL_GATE_DISABLE_3,Data slice slv_dly_control block power reduction disable for slice 3" "0,1" group.long 0x4D24++0x03 line.long 0x00 "DENALI_PHY_841,DENALI_PHY_841" bitfld.long 0x00 24.--26. "PHY_DQS_TSEL_ENABLE_3,Operation type tsel enables for DQS signals for slice 3" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 8.--23. 1. "PHY_DQ_TSEL_SELECT_3,Operation type tsel select values for DQ/DM signals for slice 3" newline bitfld.long 0x00 0.--2. "PHY_DQ_TSEL_ENABLE_3,Operation type tsel enables for DQ/DM signals for slice 3" "0,1,2,3,4,5,6,7" group.long 0x4D28++0x03 line.long 0x00 "DENALI_PHY_842,DENALI_PHY_842" hexmask.long.byte 0x00 24.--30. 1. "PHY_VREF_INITIAL_START_POINT_3,Data slice initial VREF training start value for slice 3" bitfld.long 0x00 16.--17. "PHY_TWO_CYC_PREAMBLE_3,2 cycle preamble support for slice 3" "0,1,2,3" newline hexmask.long.word 0x00 0.--15. 1. "PHY_DQS_TSEL_SELECT_3,Operation type tsel select values for DQS signals for slice 3" group.long 0x4D2C++0x03 line.long 0x00 "DENALI_PHY_843,DENALI_PHY_843" hexmask.long.byte 0x00 24.--31. 1. "PHY_NTP_WDQ_STEP_SIZE_3,Step size of WR DQ slave delay during No-Topology training for slice 3" bitfld.long 0x00 16. "PHY_NTP_TRAIN_EN_3,Enable for No-Topology training for slice 3" "0,1" newline bitfld.long 0x00 8.--9. "PHY_VREF_TRAINING_CTRL_3,Data slice vref training enable control for slice 3" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. "PHY_VREF_INITIAL_STOP_POINT_3,Data slice initial VREF training stop value for slice 3" group.long 0x4D40++0x03 line.long 0x00 "DENALI_PHY_848,DENALI_PHY_848" hexmask.long.byte 0x00 16.--22. 1. "PHY_PAD_DSLICE_IO_CFG_3,Controls PCLK/PARK pin for pad for slice 3" bitfld.long 0x00 8.--12. "PHY_PAD_FDBK_RX_DCD_3,Controls RX_DCD pin for fdbk pad for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "PHY_PAD_DQS_RX_DCD_3,Controls RX_DCD pin for dqs pad for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4D60++0x03 line.long 0x00 "DENALI_PHY_856,DENALI_PHY_856" hexmask.long.word 0x00 16.--27. 1. "PHY_PAD_VREF_CTRL_DQ_3,Pad VREF control settings for DQ slice 3" hexmask.long.word 0x00 0.--15. 1. "PHY_VREF_SETTING_TIME_3,Number of cycles for vref settle after setting is changed for slice 3" group.long 0x4D64++0x03 line.long 0x00 "DENALI_PHY_857,DENALI_PHY_857" bitfld.long 0x00 24.--25. "PHY_RDDATA_EN_IE_DLY_3,Number of cycles that the dfi_rddata_en signal is earlier than necessary for input enable generation for slice 3" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. "PHY_DQS_IE_TIMING_3,Start/end timing values for DQS input enable signals for slice 3" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_DQ_IE_TIMING_3,Start/end timing values for DQ/DM input enable signals for slice 3" bitfld.long 0x00 0. "PHY_PER_CS_TRAINING_EN_3,Enables the per-rank training and read/write timing capabilities for slice 3" "0,1" group.long 0x4D68++0x03 line.long 0x00 "DENALI_PHY_858,DENALI_PHY_858" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_OE_DLY_3,Number of cycles that the dfi_rddata_en signal is earlier than necessary for LP4 OE extension generation for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "PHY_RDDATA_EN_TSEL_DLY_3,Number of cycles that the dfi_rddata_en signal is earlier than necessary for TSEL enable generation for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8. "PHY_DBI_MODE_3,DBI mode for slice 3" "0,1" bitfld.long 0x00 0.--1. "PHY_IE_MODE_3,Input enable mode bits for slice 3" "0,1,2,3" group.long 0x4D70++0x03 line.long 0x00 "DENALI_PHY_860,DENALI_PHY_860" hexmask.long.byte 0x00 24.--31. 1. "PHY_WRLVL_DLY_STEP_3,DQS slave delay step size during write leveling for slice 3" bitfld.long 0x00 16.--19. "PHY_RPTR_UPDATE_3,Offset in cycles from the dfi_rddata_en signal to release data from the entry FIFO for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--15. 1. "PHY_MASTER_DELAY_HALF_MEASURE_3,Defines the number of delay line elements to be considered in determing whether to lock to a half clock cycle in the data slice master for slice 3" hexmask.long.byte 0x00 0.--7. 1. "PHY_MASTER_DELAY_WAIT_3,Wait cycles for master delay line locking algorithm for slice 3" group.long 0x4D74++0x03 line.long 0x00 "DENALI_PHY_861,DENALI_PHY_861" bitfld.long 0x00 24.--28. "PHY_GTLVL_RESP_WAIT_CNT_3,Number of cycles + 4 to wait between dfi_rddata_en and the sampling of the DQS during gate training for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--19. "PHY_GTLVL_DLY_STEP_3,DQS slave delay step size during gate training for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--13. "PHY_WRLVL_RESP_WAIT_CNT_3,Number of cycles to wait between dfi_wrlvl_strobe and the sampling of the DQs during write leveling for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. "PHY_WRLVL_DLY_FINE_STEP_3,DQS slave delay fine step size during write leveling for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4D80++0x03 line.long 0x00 "DENALI_PHY_864,DENALI_PHY_864" hexmask.long.word 0x00 0.--9. 1. "PHY_RDLVL_MAX_EDGE_3,The maximun rdlvl slave delay search window for read eye training for slice 3" group.long 0x4D84++0x03 line.long 0x00 "DENALI_PHY_865,DENALI_PHY_865" bitfld.long 0x00 24.--28. "PHY_RDDATA_EN_DLY_3,Number of cycles that the dfi_rddata_en signal is early for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--21. "PHY_MEAS_DLY_STEP_ENABLE_3,Data slice training step definition using phy_meas_dly_step_value for slice 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--10. "PHY_WRPATH_GATE_TIMING_3,Write path clock gating timing for slice 3" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--1. "PHY_WRPATH_GATE_DISABLE_3,Write path clock gating disable for slice 3" "0,1,2,3" group.long 0x4D88++0x03 line.long 0x00 "DENALI_PHY_866,DENALI_PHY_866" hexmask.long 0x00 0.--31. 1. "PHY_DQ_DM_SWIZZLE0_3,DQ/DM bit swizzling 0 for slice 3" group.long 0x4D90++0x03 line.long 0x00 "DENALI_PHY_868,DENALI_PHY_868" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ1_SLAVE_DELAY_3,Write clock slave delay setting for DQ1 for slice 3" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ0_SLAVE_DELAY_3,Write clock slave delay setting for DQ0 for slice 3" group.long 0x4D94++0x03 line.long 0x00 "DENALI_PHY_869,DENALI_PHY_869" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ3_SLAVE_DELAY_3,Write clock slave delay setting for DQ3 for slice 3" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ2_SLAVE_DELAY_3,Write clock slave delay setting for DQ2 for slice 3" group.long 0x4D98++0x03 line.long 0x00 "DENALI_PHY_870,DENALI_PHY_870" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ5_SLAVE_DELAY_3,Write clock slave delay setting for DQ5 for slice 3" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ4_SLAVE_DELAY_3,Write clock slave delay setting for DQ4 for slice 3" group.long 0x4D9C++0x03 line.long 0x00 "DENALI_PHY_871,DENALI_PHY_871" hexmask.long.word 0x00 16.--26. 1. "PHY_CLK_WRDQ7_SLAVE_DELAY_3,Write clock slave delay setting for DQ7 for slice 3" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDQ6_SLAVE_DELAY_3,Write clock slave delay setting for DQ6 for slice 3" group.long 0x4DA0++0x03 line.long 0x00 "DENALI_PHY_872,DENALI_PHY_872" hexmask.long.word 0x00 16.--25. 1. "PHY_CLK_WRDQS_SLAVE_DELAY_3,Write clock slave delay setting for DQS for slice 3" hexmask.long.word 0x00 0.--10. 1. "PHY_CLK_WRDM_SLAVE_DELAY_3,Write clock slave delay setting for DM for slice 3" group.long 0x4DC8++0x03 line.long 0x00 "DENALI_PHY_882,DENALI_PHY_882" hexmask.long.word 0x00 16.--25. 1. "PHY_RDDQS_GATE_SLAVE_DELAY_3,Read DQS slave delay setting for slice 3" hexmask.long.word 0x00 0.--9. 1. "PHY_RDDQS_DM_FALL_SLAVE_DELAY_3,Falling edge read DQS slave delay setting for DM for slice 3" group.long 0x5018++0x03 line.long 0x00 "DENALI_PHY_1030,DENALI_PHY_1030" bitfld.long 0x00 24. "PHY_ADR_IE_MODE_0,Input enable control for address slice 0" "0,1" rbitfld.long 0x00 16.--18. "PHY_ADR_WRADDR_SHIFT_OBS_0,Observation register containing automatic half cycle and cycle shift values for address slice 0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--9. "PHY_ADR_TYPE_0,DRAM type for address slice 0" "0,1,2,3" bitfld.long 0x00 0. "PHY_ADR_SLV_DLY_CTRL_GATE_DISABLE_0,Power reduction slv_dly_control block gate disable for address slice 0" "0,1" group.long 0x507C++0x03 line.long 0x00 "DENALI_PHY_1055,DENALI_PHY_1055" bitfld.long 0x00 24.--26. "PHY_PAD_ADR_RX_PCLK_CLK_SEL_0,Reserved for address slice 0" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 8.--18. 1. "PHY_PAD_ADR_IO_CFG_0,Controls I/O pads for address pad for address slice 0" newline hexmask.long.byte 0x00 0.--7. 1. "PHY_ADR_TSEL_SELECT_0,Tsel select values for address slice 0" group.long 0x509C++0x03 line.long 0x00 "DENALI_PHY_1063,DENALI_PHY_1063" bitfld.long 0x00 8.--11. "PHY_ADR_CALVL_DLY_STEP_0,Sets the delay step size plus 1 during CA training for address slice 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "PHY_ADR_MASTER_DELAY_HALF_MEASURE_0,Defines the number of delay line elements to be considered in determing whether to lock to a half clock cycle for the master in address slice 0" group.long 0x5418++0x03 line.long 0x00 "DENALI_PHY_1286,DENALI_PHY_1286" bitfld.long 0x00 24. "PHY_ADR_IE_MODE_1,Input enable control for address slice 1" "0,1" rbitfld.long 0x00 16.--18. "PHY_ADR_WRADDR_SHIFT_OBS_1,Observation register containing automatic half cycle and cycle shift values for address slice 1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--9. "PHY_ADR_TYPE_1,DRAM type for address slice 1" "0,1,2,3" bitfld.long 0x00 0. "PHY_ADR_SLV_DLY_CTRL_GATE_DISABLE_1,Power reduction slv_dly_control block gate disable for address slice 1" "0,1" group.long 0x547C++0x03 line.long 0x00 "DENALI_PHY_1311,DENALI_PHY_1311" bitfld.long 0x00 24.--26. "PHY_PAD_ADR_RX_PCLK_CLK_SEL_1,Reserved for address slice 1" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 8.--18. 1. "PHY_PAD_ADR_IO_CFG_1,Controls I/O pads for address pad for address slice 1" newline hexmask.long.byte 0x00 0.--7. 1. "PHY_ADR_TSEL_SELECT_1,Tsel select values for address slice 1" group.long 0x549C++0x03 line.long 0x00 "DENALI_PHY_1319,DENALI_PHY_1319" bitfld.long 0x00 8.--11. "PHY_ADR_CALVL_DLY_STEP_1,Sets the delay step size plus 1 during CA training for address slice 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. "PHY_ADR_MASTER_DELAY_HALF_MEASURE_1,Defines the number of delay line elements to be considered in determing whether to lock to a half clock cycle for the master in address slice 1" group.long 0x5804++0x03 line.long 0x00 "DENALI_PHY_1537,DENALI_PHY_1537" bitfld.long 0x00 24.--28. "PHY_SW_GRP0_SHIFT_0,Address slice slave delay setting for address slice 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--17. "PHY_FREQ_SEL_INDEX,Selects which frequency set to update when PHY_FREQ_SEL_MULTICAST_EN is not set" "0,1,2,3" newline bitfld.long 0x00 8. "PHY_FREQ_SEL_MULTICAST_EN,When set a register write will update parameters for all frequency sets simultaneously" "0,1" bitfld.long 0x00 0. "PHY_FREQ_SEL_FROM_REGIF,Indicates which source is used to select the frequency copy" "0,1" group.long 0x582C++0x03 line.long 0x00 "DENALI_PHY_1547,DENALI_PHY_1547" bitfld.long 0x00 16.--19. "PHY_CSLVL_CS_MAP,CS training map" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8. "PHY_LP4_BOOT_DISABLE,Controls the handling of the DFI frequency" "0,1" newline bitfld.long 0x00 0. "PHY_CSLVL_ENABLE,CS training enable" "0,1" group.long 0x584C++0x03 line.long 0x00 "DENALI_PHY_1555,DENALI_PHY_1555" bitfld.long 0x00 0. "PHY_LP4_BOOT_PLL_BYPASS,PHY clock PLL bypass select" "0,1" rgroup.long 0x5870++0x03 line.long 0x00 "DENALI_PHY_1564,DENALI_PHY_1564" hexmask.long.word 0x00 16.--31. 1. "PHY_PLL_OBS_1,PHY TOP level clock PLL_1 observe values" hexmask.long.word 0x00 0.--15. 1. "PHY_PLL_OBS_0,PHY TOP level clock PLL_0 observe values" group.long 0x5874++0x03 line.long 0x00 "DENALI_PHY_1565,DENALI_PHY_1565" bitfld.long 0x00 24. "PHY_LP4_BOOT_LOW_FREQ_SEL,Control the PLL domain enter/exit from the negative clock edge for LPDDR4 boot frequency" "0,1" bitfld.long 0x00 16.--17. "PHY_PLL_TESTOUT_SEL,PHY PLL testout select" "0,1,2,3" newline hexmask.long.word 0x00 0.--15. 1. "PHY_PLL_OBS_2,PHY TOP level clock PLL_2 observe values" group.long 0x5878++0x03 line.long 0x00 "DENALI_PHY_1566,DENALI_PHY_1566" bitfld.long 0x00 16. "PHY_LS_IDLE_EN,Indicates the Reduced Idle Power State is enabled in low power mode" "0,1" hexmask.long.byte 0x00 8.--15. 1. "PHY_LP_WAKEUP,Specifies the number of cycles the PHY takes to wakeup in low power mode" newline bitfld.long 0x00 0.--3. "PHY_TCKSRE_WAIT,Specifies the number of cycles the PHY should wait before turning off the PLL for a deep sleep or DFS event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x5884++0x03 line.long 0x00 "DENALI_PHY_1569,DENALI_PHY_1569" hexmask.long.tbyte 0x00 0.--17. 1. "PHY_PAD_FDBK_TERM,Controls term settings for gate feedback pads" group.long 0x58B0++0x03 line.long 0x00 "DENALI_PHY_1580,DENALI_PHY_1580" hexmask.long.tbyte 0x00 0.--22. 1. "PHY_TST_CLK_PAD_CTRL3,PHY test clock pad additional controls" group.long 0x58E8++0x03 line.long 0x00 "DENALI_PHY_1594,DENALI_PHY_1594" hexmask.long.tbyte 0x00 8.--27. 1. "PHY_CAL_SLOPE_ADJ_0,defines slope configure in pad calibration process" hexmask.long.byte 0x00 0.--7. 1. "PHY_ADRCTL_PVT_MAP_0,defines slope configure in pad calibration process" group.long 0x591C++0x03 line.long 0x00 "DENALI_PHY_1607,DENALI_PHY_1607" bitfld.long 0x00 0. "PHY_AC_SLV_DLY_CTRL_GATE_DISABLE,ac slice slv_dly_control block power reduction disable" "0,1" group.long 0x5958++0x03 line.long 0x00 "DENALI_PHY_1622,DENALI_PHY_1622" hexmask.long.tbyte 0x00 0.--17. 1. "PHY_PAD_CAL_IO_CFG_0,Pad calibration Controls PCLK/PARK pin and vref switch" group.long 0x5964++0x03 line.long 0x00 "DENALI_PHY_1625,DENALI_PHY_1625" bitfld.long 0x00 16. "PHY_LOW_FREQ_SEL,Enables the PHY to enter/exit the PLL domain from the negative clock edge" "0,1" hexmask.long.word 0x00 0.--12. 1. "PHY_PLL_CTRL,PHY clock PLL controls" group.long 0x5968++0x03 line.long 0x00 "DENALI_PHY_1626,DENALI_PHY_1626" bitfld.long 0x00 24.--27. "PHY_CSLVL_DLY_STEP,Sets the delay step size plus 1 during CS training" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PHY_CSLVL_CAPTURE_CNT,Defines the number of samples to take at each GRP slave delay setting during CS training" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--11. 1. "PHY_PAD_VREF_CTRL_AC,Pad VREF control settings for the address/control" group.long 0x598C++0x03 line.long 0x00 "DENALI_PHY_1635,DENALI_PHY_1635" hexmask.long 0x00 0.--29. 1. "PHY_PAD_FDBK_DRIVE,Controls drive settings for gate feedback pads" group.long 0x5990++0x03 line.long 0x00 "DENALI_PHY_1636,DENALI_PHY_1636" hexmask.long.tbyte 0x00 0.--18. 1. "PHY_PAD_FDBK_DRIVE2,Controls drive settings (enslice/boost) for gate feedback pads" group.long 0x5994++0x03 line.long 0x00 "DENALI_PHY_1637,DENALI_PHY_1637" hexmask.long 0x00 0.--30. 1. "PHY_PAD_DATA_DRIVE,Controls drive settings for data pads" group.long 0x599C++0x03 line.long 0x00 "DENALI_PHY_1639,DENALI_PHY_1639" hexmask.long 0x00 0.--31. 1. "PHY_PAD_DQS_DRIVE,Controls drive settings for dqs pads" group.long 0x59A4++0x03 line.long 0x00 "DENALI_PHY_1641,DENALI_PHY_1641" hexmask.long 0x00 0.--29. 1. "PHY_PAD_ADDR_DRIVE,Controls drive settings for the address/control pads" group.long 0x59A8++0x03 line.long 0x00 "DENALI_PHY_1642,DENALI_PHY_1642" hexmask.long 0x00 0.--28. 1. "PHY_PAD_ADDR_DRIVE2,Controls drive settings for the address/control pads" group.long 0x59AC++0x03 line.long 0x00 "DENALI_PHY_1643,DENALI_PHY_1643" hexmask.long 0x00 0.--31. 1. "PHY_PAD_CLK_DRIVE,Controls drive settings for clock pads" group.long 0x59B0++0x03 line.long 0x00 "DENALI_PHY_1644,DENALI_PHY_1644" hexmask.long.tbyte 0x00 0.--19. 1. "PHY_PAD_CLK_DRIVE2,Controls drive settings for clock pads" group.long 0x59B4++0x03 line.long 0x00 "DENALI_PHY_1645,DENALI_PHY_1645" hexmask.long 0x00 0.--29. 1. "PHY_PAD_CKE_DRIVE,Controls drive settings for cke pads" group.long 0x59B8++0x03 line.long 0x00 "DENALI_PHY_1646,DENALI_PHY_1646" hexmask.long 0x00 0.--28. 1. "PHY_PAD_CKE_DRIVE2,Controls drive settings for cke pads" group.long 0x59BC++0x03 line.long 0x00 "DENALI_PHY_1647,DENALI_PHY_1647" hexmask.long 0x00 0.--29. 1. "PHY_PAD_RST_DRIVE,Controls drive settings for reset_n pads" group.long 0x59C0++0x03 line.long 0x00 "DENALI_PHY_1648,DENALI_PHY_1648" hexmask.long 0x00 0.--28. 1. "PHY_PAD_RST_DRIVE2,Controls drive settings for reset_n pads" group.long 0x59C4++0x03 line.long 0x00 "DENALI_PHY_1649,DENALI_PHY_1649" hexmask.long 0x00 0.--29. 1. "PHY_PAD_CS_DRIVE,Controls drive settings for cs pads" group.long 0x59C8++0x03 line.long 0x00 "DENALI_PHY_1650,DENALI_PHY_1650" hexmask.long 0x00 0.--28. 1. "PHY_PAD_CS_DRIVE2,Controls drive settings for cs pads" group.long 0x59CC++0x03 line.long 0x00 "DENALI_PHY_1651,DENALI_PHY_1651" hexmask.long 0x00 0.--29. 1. "PHY_PAD_ODT_DRIVE,Controls drive settings for odt pads" group.long 0x59D0++0x03 line.long 0x00 "DENALI_PHY_1652,DENALI_PHY_1652" hexmask.long 0x00 0.--28. 1. "PHY_PAD_ODT_DRIVE2,Controls drive settings for odt pads" group.long 0x59D4++0x03 line.long 0x00 "DENALI_PHY_1653,DENALI_PHY_1653" hexmask.long.byte 0x00 24.--30. 1. "PHY_CAL_SETTLING_PRD_0,Number of clock cycles to extend dfi_phyupd_req after the ack is received for settling of final values" hexmask.long.word 0x00 8.--23. 1. "PHY_CAL_VREF_SWITCH_TIMER_0,The settling time for a switch in VREF during IO pad calibration" newline bitfld.long 0x00 0.--2. "PHY_CAL_CLK_SELECT_0,Pad calibration pad clock frequency select setting for block 0" "0,1,2,3,4,5,6,7" tree.end tree "LPI2C" repeat 8. (list 0. 1. 2. 3. 4. 5. 6. 7.) (list ad:0x28098000 ad:0x28099000 ad:0x28108000 ad:0x28109000 ad:0x29370000 ad:0x29380000 ad:0x29840000 ad:0x29850000) tree "LPI2C$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" bitfld.long 0x00 8.--11. "MRXFIFO,Master Receive FIFO Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "MTXFIFO,Master Transmit FIFO Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10++0x03 line.long 0x00 "MCR,Master Control" bitfld.long 0x00 9. "RRF,Reset Receive FIFO" "0: NO_EFFECT,1: Receive FIFO is reset" bitfld.long 0x00 8. "RTF,Reset Transmit FIFO" "0: NO_EFFECT,1: Transmit FIFO is reset" newline bitfld.long 0x00 3. "DBGEN,Debug Enable" "0: Master is disabled in debug mode,1: Master is enabled in debug mode" bitfld.long 0x00 2. "DOZEN,Doze mode enable" "0: Master is enabled in Doze mode,1: Master is disabled in Doze mode" newline bitfld.long 0x00 1. "RST,Software Reset" "0: Master logic is not reset,1: Master logic is reset" bitfld.long 0x00 0. "MEN,Master Enable" "0: Master logic is disabled,1: Master logic is enabled" group.long 0x14++0x03 line.long 0x00 "MSR,Master Status" rbitfld.long 0x00 25. "BBF,Bus Busy Flag" "0: I2C Bus is idle,1: I2C Bus is busy" rbitfld.long 0x00 24. "MBF,Master Busy Flag" "0: I2C Master is idle,1: I2C Master is busy" newline eventfld.long 0x00 14. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" eventfld.long 0x00 13. "PLTF,Pin Low Timeout Flag" "0: Pin low timeout has not occurred or is disabled,1: Pin low timeout has occurred" newline eventfld.long 0x00 12. "FEF,FIFO Error Flag" "0: No error,1: Master sending or receiving data without a.." eventfld.long 0x00 11. "ALF,Arbitration Lost Flag" "0: Master has not lost arbitration,1: Master has lost arbitration" newline eventfld.long 0x00 10. "NDF,NACK Detect Flag" "0: Unexpected NACK was not detected,1: Unexpected NACK was detected" eventfld.long 0x00 9. "SDF,STOP Detect Flag" "0: Master has not generated a STOP condition,1: Master has generated a STOP condition" newline eventfld.long 0x00 8. "EPF,End Packet Flag" "0: Master has not generated a STOP or Repeated..,1: Master has generated a STOP or Repeated START.." rbitfld.long 0x00 1. "RDF,Receive Data Flag" "0: Receive Data is not ready,1: Receive data is ready" newline rbitfld.long 0x00 0. "TDF,Transmit Data Flag" "0: Transmit data is not requested,1: Transmit data is requested" group.long 0x18++0x03 line.long 0x00 "MIER,Master Interrupt Enable" bitfld.long 0x00 14. "DMIE,Data Match Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 13. "PLTIE,Pin Low Timeout Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 12. "FEIE,FIFO Error Interrupt Enable" "0: ENABLED,1: DISABLED" bitfld.long 0x00 11. "ALIE,Arbitration Lost Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 10. "NDIE,NACK Detect Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 9. "SDIE,STOP Detect Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 8. "EPIE,End Packet Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 1. "RDIE,Receive Data Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 0. "TDIE,Transmit Data Interrupt Enable" "0: DISABLED,1: ENABLED" group.long 0x1C++0x03 line.long 0x00 "MDER,Master DMA Enable" bitfld.long 0x00 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0x00 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x20++0x03 line.long 0x00 "MCFGR0,Master Configuration 0" bitfld.long 0x00 9. "RDMO,Receive Data Match Only" "0: Received data is stored in the receive FIFO,1: Received data is discarded unless the the.." bitfld.long 0x00 8. "CIRFIFO,Circular FIFO Enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x00 2. "HRSEL,Host Request Select" "0: Host request input is pin HREQ,1: Host request input is input trigger" bitfld.long 0x00 1. "HRPOL,Host Request Polarity" "0: ACTIVE_LOW,1: ACTIVE_HIGH" newline bitfld.long 0x00 0. "HREN,Host Request Enable" "0: Host request input is disabled,1: Host request input is enabled" group.long 0x24++0x03 line.long 0x00 "MCFGR1,Master Configuration 1" bitfld.long 0x00 27. "FRCHS,Force HS-mode" "0: No effect,1: LPI2C pin state forced into HS-mode" bitfld.long 0x00 24.--26. "PINCFG,Pin Configuration" "0: 2-pin open drain mode,1: 2-pin output only mode (ultra-fast mode),2: 2-pin push-pull mode,3: 4-pin push-pull mode,4: 2-pin open drain mode with separate LPI2C slave,5: 2-pin output only mode (ultra-fast mode) with..,6: 2-pin push-pull mode with separate LPI2C slave,7: 4-pin push-pull mode (inverted outputs)" newline bitfld.long 0x00 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled (1st data word equals..,3: Match is enabled (any data word equals..,4: Match is enabled (1st data word equals..,5: Match is enabled (any data word equals..,6: Match is enabled (1st data word AND..,7: Match is enabled (any data word AND.." bitfld.long 0x00 10. "TIMECFG,Timeout Configuration" "0: MSR[PLTF] sets if SCL is low for longer than..,1: MSR[PLTF] sets if either SCL or SDA is low.." newline bitfld.long 0x00 9. "IGNACK,IGNACK" "0: LPI2C Master receives ACK and NACK normally,1: LPI2C Master treats a received NACK as if it.." bitfld.long 0x00 8. "AUTOSTOP,Automatic STOP Generation" "0: No effect,1: STOP condition is automatically generated.." newline bitfld.long 0x00 0.--2. "PRESCALE,Prescaler" "0: DIVIDE_BY_1,1: DIVIDE_BY_2,2: DIVIDE_BY_4,3: DIVIDE_BY_8,4: DIVIDE_BY_16,5: DIVIDE_BY_32,6: DIVIDE_BY_64,7: DIVIDE_BY_128" group.long 0x28++0x03 line.long 0x00 "MCFGR2,Master Configuration 2" bitfld.long 0x00 24.--27. "FILTSDA,Glitch Filter SDA" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "FILTSCL,Glitch Filter SCL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--11. 1. "BUSIDLE,Bus Idle Timeout" group.long 0x2C++0x03 line.long 0x00 "MCFGR3,Master Configuration 3" hexmask.long.word 0x00 8.--19. 1. "PINLOW,Pin Low Timeout" group.long 0x40++0x03 line.long 0x00 "MDMR,Master Data Match" hexmask.long.byte 0x00 16.--23. 1. "MATCH1,Match 1 Value" hexmask.long.byte 0x00 0.--7. 1. "MATCH0,Match 0 Value" repeat 2. (strings "0" "1" )(list 0x0 0x8 ) group.long ($2+0x48)++0x03 line.long 0x00 "MCCR$1,Master Clock Configuration $1" bitfld.long 0x00 24.--29. "DATAVD,Data Valid Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--21. "SETHOLD,Setup Hold Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--13. "CLKHI,Clock High Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. "CLKLO,Clock Low Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" repeat.end group.long 0x58++0x03 line.long 0x00 "MFCR,Master FIFO Control" bitfld.long 0x00 16.--17. "RXWATER,Receive FIFO Watermark" "0,1,2,3" bitfld.long 0x00 0.--1. "TXWATER,Transmit FIFO Watermark" "0,1,2,3" rgroup.long 0x5C++0x03 line.long 0x00 "MFSR,Master FIFO Status" bitfld.long 0x00 16.--18. "RXCOUNT,Receive FIFO Count" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "TXCOUNT,Transmit FIFO Count" "0,1,2,3,4,5,6,7" wgroup.long 0x60++0x03 line.long 0x00 "MTDR,Master Transmit Data" bitfld.long 0x00 8.--10. "CMD,Command Data" "0: TRANSMIT_DATA_7_THROUGH_0,1: RECEIVE_DATA_7_THROUGH_0_PLUS_ONE,2: GENERATE_STOP_CONDITION,3: RECEIVE_AND_DISCARD_DATA_7_THROUGH_0_PLUS_ONE,4: Generate (repeated) START and transmit..,5: Generate (repeated) START and transmit..,6: Generate (repeated) START and transmit..,7: Generate (repeated) START and transmit.." hexmask.long.byte 0x00 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x70++0x03 line.long 0x00 "MRDR,Master Receive Data" bitfld.long 0x00 14. "RXEMPTY,RX Empty" "0: Receive FIFO is not empty,1: Receive FIFO is empty" hexmask.long.byte 0x00 0.--7. 1. "DATA,Receive Data" group.long 0x110++0x03 line.long 0x00 "SCR,Slave Control" bitfld.long 0x00 9. "RRF,Reset Receive FIFO" "0: NO_EFFECT,1: Receive Data Register is now empty" bitfld.long 0x00 8. "RTF,Reset Transmit FIFO" "0: NO_EFFECT,1: Transmit Data Register is now empty" newline bitfld.long 0x00 5. "FILTDZ,Filter Doze Enable" "0: Filter remains enabled in Doze mode,1: Filter is disabled in Doze mode" bitfld.long 0x00 4. "FILTEN,Filter Enable" "0: Disable digital filter and output delay..,1: Enable digital filter and output delay.." newline bitfld.long 0x00 1. "RST,Software Reset" "0: Slave mode logic is not reset,1: Slave mode logic is reset" bitfld.long 0x00 0. "SEN,Slave Enable" "0: I2C Slave mode is disabled,1: I2C Slave mode is enabled" group.long 0x114++0x03 line.long 0x00 "SSR,Slave Status" rbitfld.long 0x00 25. "BBF,Bus Busy Flag" "0: I2C Bus is idle,1: I2C Bus is busy" rbitfld.long 0x00 24. "SBF,Slave Busy Flag" "0: I2C Slave is idle,1: I2C Slave is busy" newline rbitfld.long 0x00 15. "SARF,SMBus Alert Response Flag" "0: SMBus Alert Response is disabled or not..,1: SMBus Alert Response is enabled and detected" rbitfld.long 0x00 14. "GCF,General Call Flag" "0: Slave has not detected the General Call..,1: Slave has detected the General Call Address" newline rbitfld.long 0x00 13. "AM1F,Address Match 1 Flag" "0: Have not received an ADDR1 or ADDR0/ADDR1..,1: Have received an ADDR1 or ADDR0/ADDR1 range.." rbitfld.long 0x00 12. "AM0F,Address Match 0 Flag" "0: Have not received an ADDR0 matching address,1: Have received an ADDR0 matching address" newline eventfld.long 0x00 11. "FEF,FIFO Error Flag" "0: FIFO underflow or overflow was not detected,1: FIFO underflow or overflow was detected" eventfld.long 0x00 10. "BEF,Bit Error Flag" "0: Slave has not detected a bit error,1: Slave has detected a bit error" newline eventfld.long 0x00 9. "SDF,STOP Detect Flag" "0: Slave has not detected a STOP condition,1: Slave has detected a STOP condition" eventfld.long 0x00 8. "RSF,Repeated Start Flag" "0: Slave has not detected a Repeated START..,1: Slave has detected a Repeated START condition" newline rbitfld.long 0x00 3. "TAF,Transmit ACK Flag" "0: Transmit ACK/NACK is not required,1: Transmit ACK/NACK is required" rbitfld.long 0x00 2. "AVF,Address Valid Flag" "0: Address Status Register is not valid,1: Address Status Register is valid" newline rbitfld.long 0x00 1. "RDF,Receive Data Flag" "0: Receive data is not ready,1: Receive data is ready" rbitfld.long 0x00 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" group.long 0x118++0x03 line.long 0x00 "SIER,Slave Interrupt Enable" bitfld.long 0x00 15. "SARIE,SMBus Alert Response Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 14. "GCIE,General Call Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 13. "AM1IE,Address Match 1 Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 12. "AM0IE,Address Match 0 Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 11. "FEIE,FIFO Error Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 10. "BEIE,Bit Error Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 9. "SDIE,STOP Detect Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 8. "RSIE,Repeated Start Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 3. "TAIE,Transmit ACK Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 2. "AVIE,Address Valid Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 1. "RDIE,Receive Data Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 0. "TDIE,Transmit Data Interrupt Enable" "0: DISABLED,1: ENABLED" group.long 0x11C++0x03 line.long 0x00 "SDER,Slave DMA Enable" bitfld.long 0x00 9. "SDDE,Stop Detect DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0x00 8. "RSDE,Repeated Start DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0x00 2. "AVDE,Address Valid DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0x00 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0x00 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x124++0x03 line.long 0x00 "SCFGR1,Slave Configuration 1" bitfld.long 0x00 16.--18. "ADDRCFG,Address Configuration" "0: Address match 0 (7-bit),1: Address match 0 (10-bit),2: Address match 0 (7-bit) or Address match 1..,3: Address match 0 (10-bit) or Address match 1..,4: Address match 0 (7-bit) or Address match 1..,5: Address match 0 (10-bit) or Address match 1..,6: From Address match 0 (7-bit) to Address match..,7: From Address match 0 (10-bit) to Address.." bitfld.long 0x00 13. "HSMEN,High Speed Mode Enable" "0: Disables detection of HS-mode master code,1: Enables detection of HS-mode master code" newline bitfld.long 0x00 12. "IGNACK,Ignore NACK" "0: Slave ends transfer when NACK is detected,1: Slave does not end transfer when NACK detected" bitfld.long 0x00 11. "RXCFG,Receive Data Configuration" "0: Reading the Receive Data register returns..,1: Reading the Receive Data register when the.." newline bitfld.long 0x00 10. "TXCFG,Transmit Flag Configuration" "0: Transmit Data Flag only asserts during a..,1: Transmit Data Flag asserts whenever the.." bitfld.long 0x00 9. "SAEN,SMBus Alert Enable" "0: Disables match on SMBus Alert,1: Enables match on SMBus Alert" newline bitfld.long 0x00 8. "GCEN,General Call Enable" "0: General Call address is disabled,1: General Call address is enabled" bitfld.long 0x00 3. "ACKSTALL,ACK SCL Stall" "0: Clock stretching is disabled,1: Clock stretching is enabled" newline bitfld.long 0x00 2. "TXDSTALL,TX Data SCL Stall" "0: Clock stretching is disabled,1: Clock stretching is enabled" bitfld.long 0x00 1. "RXSTALL,RX SCL Stall" "0: Clock stretching is disabled,1: Clock stretching is enabled" newline bitfld.long 0x00 0. "ADRSTALL,Address SCL Stall" "0: Clock stretching is disabled,1: Clock stretching is enabled" group.long 0x128++0x03 line.long 0x00 "SCFGR2,Slave Configuration 2" bitfld.long 0x00 24.--27. "FILTSDA,Glitch Filter SDA" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "FILTSCL,Glitch Filter SCL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--13. "DATAVD,Data Valid Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. "CLKHOLD,Clock Hold Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x03 line.long 0x00 "SAMR,Slave Address Match" hexmask.long.word 0x00 17.--26. 1. "ADDR1,Address 1 Value" hexmask.long.word 0x00 1.--10. 1. "ADDR0,Address 0 Value" rgroup.long 0x150++0x03 line.long 0x00 "SASR,Slave Address Status" bitfld.long 0x00 14. "ANV,Address Not Valid" "0: Received Address (RADDR) is valid,1: Received Address (RADDR) is not valid" hexmask.long.word 0x00 0.--10. 1. "RADDR,Received Address" group.long 0x154++0x03 line.long 0x00 "STAR,Slave Transmit ACK" bitfld.long 0x00 0. "TXNACK,Transmit NACK" "0: Write a Transmit ACK for each received word,1: Write a Transmit NACK for each received word" wgroup.long 0x160++0x03 line.long 0x00 "STDR,Slave Transmit Data" hexmask.long.byte 0x00 0.--7. 1. "DATA,Transmit Data" rgroup.long 0x170++0x03 line.long 0x00 "SRDR,Slave Receive Data" bitfld.long 0x00 15. "SOF,Start Of Frame" "0: Indicates this is not the first data word..,1: Indicates this is the first data word since a.." bitfld.long 0x00 14. "RXEMPTY,RX Empty" "0: The Receive Data Register is not empty,1: The Receive Data Register is empty" newline bitfld.long 0x00 8.--10. "RADDR,Received Address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 0.--7. 1. "DATA,Receive Data" tree.end repeat.end tree.end tree "LPIT" repeat 2. (list 0. 1.) (list ad:0x2803B000 ad:0x29320000) tree "LPIT$1" base $2 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" hexmask.long.byte 0x00 8.--15. 1. "EXT_TRIG,Number of External Trigger Inputs" hexmask.long.byte 0x00 0.--7. 1. "CHANNEL,Number of Timer Channels" group.long 0x08++0x03 line.long 0x00 "MCR,Module Control" bitfld.long 0x00 3. "DBG_EN,Debug Mode Enable" "0: Stop timer channels in Debug mode,1: Allow timer channels to continue to run in.." bitfld.long 0x00 2. "DOZE_EN,DOZE Mode Enable" "0: Stop timer channels in DOZE mode,1: Allow timer channels to continue to run in.." newline bitfld.long 0x00 1. "SW_RST,Software Reset" "0: Timer channels and registers are not reset,1: Reset timer channels and registers" bitfld.long 0x00 0. "M_CEN,Module Clock Enable" "0: Disable peripheral clock to timers,1: Enable peripheral clock to timers" group.long 0x0C++0x03 line.long 0x00 "MSR,Module Status" eventfld.long 0x00 3. "TIF3,Channel 3 Timer Interrupt Flag" "0: Timer has not timed out,1: Timeout has occurred (timer has timed out)" eventfld.long 0x00 2. "TIF2,Channel 2 Timer Interrupt Flag" "0: Timer has not timed out,1: Timeout has occurred (timer has timed out)" newline eventfld.long 0x00 1. "TIF1,Channel 1 Timer Interrupt Flag" "0: Timer has not timed out,1: Timeout has occurred (timer has timed out)" eventfld.long 0x00 0. "TIF0,Channel 0 Timer Interrupt Flag" "0: Timer has not timed out,1: Timeout has occurred (timer has timed out)" group.long 0x10++0x03 line.long 0x00 "MIER,Module Interrupt Enable" bitfld.long 0x00 3. "TIE3,Channel 3 Timer Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x00 2. "TIE2,Channel 2 Timer Interrupt Enable" "0: Disabled,1: Enabled" newline bitfld.long 0x00 1. "TIE1,Channel 1 Timer Interrupt Enable" "0: Disabled,1: Enabled" bitfld.long 0x00 0. "TIE0,Channel 0 Timer Interrupt Enable" "0: Disabled,1: Enabled" group.long 0x14++0x03 line.long 0x00 "SETTEN,Set Timer Enable" bitfld.long 0x00 3. "SET_T_EN_3,Set Timer 3 Enable" "0: No effect,1: Enables Timer Channel 3" bitfld.long 0x00 2. "SET_T_EN_2,Set Timer 2 Enable" "0: No Effect,1: Enables Timer Channel 2" newline bitfld.long 0x00 1. "SET_T_EN_1,Set Timer 1 Enable" "0: No Effect,1: Enables Timer Channel 1" bitfld.long 0x00 0. "SET_T_EN_0,Set Timer 0 Enable" "0: No effect,1: Enables Timer Channel 0" group.long 0x18++0x03 line.long 0x00 "CLRTEN,Clear Timer Enable" bitfld.long 0x00 3. "CLR_T_EN_3,Clear Timer 3 Enable" "0: No Action,1: Clear the Timer Enable bit (TCTRL3[T_EN]) for.." bitfld.long 0x00 2. "CLR_T_EN_2,Clear Timer 2 Enable" "0: No Action,1: Clear the Timer Enable bit (TCTRL2[T_EN]) for.." newline bitfld.long 0x00 1. "CLR_T_EN_1,Clear Timer 1 Enable" "0: No Action,1: Clear the Timer Enable bit (TCTRL1[T_EN]) for.." bitfld.long 0x00 0. "CLR_T_EN_0,Clear Timer 0 Enable" "0: No action,1: Clear the Timer Enable bit (TCTRL0[T_EN]) for.." endif repeat 4. (increment 0 1)(increment 0 0x10) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "TVAL,Timer Value" hexmask.long 0x00 0.--31. 1. "TMR_VAL,Timer Value" rgroup.long ($2+0x24)++0x03 line.long 0x00 "CVAL,Current Timer Value" hexmask.long 0x00 0.--31. 1. "TMR_CUR_VAL,Current Timer Value" group.long ($2+0x28)++0x03 line.long 0x00 "TCTRL,Timer Control" bitfld.long 0x00 24.--27. "TRG_SEL,Trigger Select" "0: Timer channel 0 - 3 trigger source is selected,1: Timer channel 0 - 3 trigger source is selected,2: Timer channel 0 - 3 trigger source is selected,3: Timer channel 0 - 3 trigger source is selected,?..." bitfld.long 0x00 23. "TRG_SRC,Trigger Source" "0: Selects external triggers,1: Selects internal triggers" newline bitfld.long 0x00 18. "TROT,Timer Reload On Trigger" "0: Timer will not reload on the selected trigger,1: Timer will reload on the selected trigger" bitfld.long 0x00 17. "TSOI,Timer Stop On Interrupt" "0: The channel timer does not stop after timeout,1: The channel timer will stop after a timeout.." newline bitfld.long 0x00 16. "TSOT,Timer Start On Trigger" "0: Timer starts to decrement immediately based..,1: Timer starts to decrement when a rising edge.." bitfld.long 0x00 2.--3. "MODE,Timer Operation Mode" "0: 32-bit Periodic Counter,1: Dual 16-bit Periodic Counter,2: 32-bit Trigger Accumulator,3: 32-bit Trigger Input Capture" newline bitfld.long 0x00 1. "CHAIN,Chain Channel" "0: Channel Chaining is disabled,1: Channel Chaining is enabled" bitfld.long 0x00 0. "T_EN,Timer Enable" "0: Timer Channel is disabled,1: Timer Channel is enabled" endif tree.end repeat.end tree.end repeat.end tree.end tree "LPSPI" repeat 4. (list 0. 1. 2. 3.) (list ad:0x2803E000 ad:0x2803F000 ad:0x2810D000 ad:0x2810E000) tree "LPSPI$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" hexmask.long.byte 0x00 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x00 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x00 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x03 line.long 0x00 "CR,Control" bitfld.long 0x00 9. "RRF,Reset Receive FIFO" "0: NO_EFFECT,1: Reset the Receive FIFO" bitfld.long 0x00 8. "RTF,Reset Transmit FIFO" "0: NO_EFFECT,1: Reset the Transmit FIFO" newline bitfld.long 0x00 3. "DBGEN,Debug Enable" "0: LPSPI module is disabled in debug mode,1: LPSPI module is enabled in debug mode" bitfld.long 0x00 2. "DOZEN,Doze Mode Enable" "0: LPSPI module is enabled in Doze mode,1: LPSPI module is disabled in Doze mode" newline bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "MEN,Module Enable" "0: Module is disabled,1: Module is enabled" group.long 0x14++0x03 line.long 0x00 "SR,Status" rbitfld.long 0x00 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x00 13. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x00 12. "REF,Receive Error Flag" "0: Receive FIFO has not overflowed,1: Receive FIFO has overflowed" eventfld.long 0x00 11. "TEF,Transmit Error Flag" "0: Transmit FIFO underrun has not occurred,1: Transmit FIFO underrun has occurred" newline eventfld.long 0x00 10. "TCF,Transfer Complete Flag" "0: All transfers have not completed,1: All transfers have completed" eventfld.long 0x00 9. "FCF,Frame Complete Flag" "0: Frame transfer has not completed,1: Frame transfer has completed" newline eventfld.long 0x00 8. "WCF,Word Complete Flag" "0: Transfer of a received word has not yet..,1: Transfer of a received word has completed" rbitfld.long 0x00 1. "RDF,Receive Data Flag" "0: Receive Data is not ready,1: Receive data is ready" newline rbitfld.long 0x00 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" group.long 0x18++0x03 line.long 0x00 "IER,Interrupt Enable" bitfld.long 0x00 13. "DMIE,Data Match Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 12. "REIE,Receive Error Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 11. "TEIE,Transmit Error Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 10. "TCIE,Transfer Complete Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 9. "FCIE,Frame Complete Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 8. "WCIE,Word Complete Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 1. "RDIE,Receive Data Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 0. "TDIE,Transmit Data Interrupt Enable" "0: DISABLED,1: ENABLED" group.long 0x1C++0x03 line.long 0x00 "DER,DMA Enable" bitfld.long 0x00 9. "FCDE,Frame Complete DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0x00 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0x00 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x20++0x03 line.long 0x00 "CFGR0,Configuration 0" bitfld.long 0x00 9. "RDMO,Receive Data Match Only" "0: Received data is stored in the receive FIFO..,1: Received data is discarded unless the SR[DMF].." bitfld.long 0x00 8. "CIRFIFO,Circular FIFO Enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x00 3. "HRDIR,Host Request Direction" "0: HREQ pin is configured as input,1: HREQ pin is configured as output" bitfld.long 0x00 2. "HRSEL,Host Request Select" "0: Host request input is the HREQ pin,1: Host request input is the input trigger" newline bitfld.long 0x00 1. "HRPOL,Host Request Polarity" "0: HREQ pin or input trigger is active high,1: HREQ pin or input trigger is active low" bitfld.long 0x00 0. "HREN,Host Request Enable" "0: Host request is disabled,1: Host request is enabled" group.long 0x24++0x03 line.long 0x00 "CFGR1,Configuration 1" bitfld.long 0x00 27. "PCSCFG,Peripheral Chip Select Configuration" "0: PCS[3:2] are configured for chip select..,1: PCS[3:2] are configured for half-duplex 4-bit.." bitfld.long 0x00 26. "OUTCFG,Output Configuration" "0: Output data retains last value when chip..,1: Output data is tristated when chip select is.." newline bitfld.long 0x00 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data and SOUT is used..,1: SIN is used for both input and output data..,2: SOUT is used for both input and output data..,3: SOUT is used for input data and SIN is used.." bitfld.long 0x00 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled is 1st data word is MATCH0..,3: Match is enabled on any data word equal..,4: Match is enabled on data match sequence,5: Match is enabled on data match sequence,6: ENABLED_DATAMATCH_110,7: ENABLED_DATAMATCH_111" newline bitfld.long 0x00 8.--11. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "PARTIAL,Partial Enable" "0: Partial words in the receive shift register..,1: Partial words in the receive shift register.." newline bitfld.long 0x00 3. "NOSTALL,No Stall" "0: Transfers stall when the transmit FIFO is..,1: Transfers do not stall allowing transmit FIFO.." bitfld.long 0x00 2. "AUTOPCS,Automatic PCS" "0: Automatic PCS generation is disabled,1: Automatic PCS generation is enabled" newline bitfld.long 0x00 1. "SAMPLE,Sample Point" "0: Input data is sampled on SCK edge,1: Input data is sampled on delayed SCK edge" bitfld.long 0x00 0. "MASTER,Master Mode" "0: SLAVE_MODE,1: MASTER_MODE" group.long 0x30++0x03 line.long 0x00 "DMR0,Data Match 0" hexmask.long 0x00 0.--31. 1. "MATCH0,Match 0 Value" group.long 0x34++0x03 line.long 0x00 "DMR1,Data Match 1" hexmask.long 0x00 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x03 line.long 0x00 "CCR,Clock Configuration" hexmask.long.byte 0x00 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x00 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x00 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x00 0.--7. 1. "SCKDIV,SCK Divider" group.long 0x44++0x03 line.long 0x00 "CCR1,Clock Configuration 1" hexmask.long.byte 0x00 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x00 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x00 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x00 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x03 line.long 0x00 "FCR,FIFO Control" bitfld.long 0x00 16.--17. "RXWATER,Receive FIFO Watermark" "0,1,2,3" bitfld.long 0x00 0.--1. "TXWATER,Transmit FIFO Watermark" "0,1,2,3" rgroup.long 0x5C++0x03 line.long 0x00 "FSR,FIFO Status" bitfld.long 0x00 16.--18. "RXCOUNT,Receive FIFO Count" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "TXCOUNT,Transmit FIFO Count" "0,1,2,3,4,5,6,7" group.long 0x60++0x03 line.long 0x00 "TCR,Transmit Command" bitfld.long 0x00 31. "CPOL,Clock Polarity" "0: The inactive state value of SCK is low,1: The inactive state value of SCK is high" bitfld.long 0x00 30. "CPHA,Clock Phase" "0: CAPTURED,1: CHANGED" newline bitfld.long 0x00 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x00 24.--25. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1],2: Transfer using PCS[2],3: Transfer using PCS[3]" newline bitfld.long 0x00 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x00 22. "BYSW,Byte Swap" "0: Byte swap is disabled,1: Byte swap is enabled" newline bitfld.long 0x00 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x00 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x00 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x00 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline bitfld.long 0x00 16.--17. "WIDTH,Transfer Width" "0: 1 bit transfer,1: 2 bit transfer,2: 4 bit transfer,?..." hexmask.long.word 0x00 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x03 line.long 0x00 "TDR,Transmit Data" hexmask.long 0x00 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0x03 line.long 0x00 "RSR,Receive Status" bitfld.long 0x00 1. "RXEMPTY,RX FIFO Empty" "0: RX FIFO is not empty,1: RX FIFO is empty" bitfld.long 0x00 0. "SOF,Start Of Frame" "0: Subsequent data word received after PCS..,1: First data word received after PCS assertion" rgroup.long 0x74++0x03 line.long 0x00 "RDR,Receive Data" hexmask.long 0x00 0.--31. 1. "DATA,Receive Data" rgroup.long 0x78++0x03 line.long 0x00 "RDROR,Receive Data Read Only" hexmask.long 0x00 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x03 line.long 0x00 "TCBR,Transmit Command Burst" hexmask.long 0x00 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0 1) (increment 0 0x04) wgroup.long ($2+0x400)++0x03 line.long 0x00 "TDBR[$1],Transmit Data Burst $1" hexmask.long 0x00 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x600)++0x03 line.long 0x00 "RDBR[$1],Receive Data Burst $1" hexmask.long 0x00 0.--31. 1. "DATA,Data" repeat.end tree.end repeat.end repeat 2. (list 4. 5.) (list ad:0x293B0000 ad:0x293C0000) tree "LPSPI$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Module Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" hexmask.long.byte 0x00 16.--23. 1. "PCSNUM,PCS Number" hexmask.long.byte 0x00 8.--15. 1. "RXFIFO,Receive FIFO Size" newline hexmask.long.byte 0x00 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x10++0x03 line.long 0x00 "CR,Control" bitfld.long 0x00 9. "RRF,Reset Receive FIFO" "0: NO_EFFECT,1: Reset the Receive FIFO" bitfld.long 0x00 8. "RTF,Reset Transmit FIFO" "0: NO_EFFECT,1: Reset the Transmit FIFO" newline bitfld.long 0x00 3. "DBGEN,Debug Enable" "0: LPSPI module is disabled in debug mode,1: LPSPI module is enabled in debug mode" bitfld.long 0x00 2. "DOZEN,Doze Mode Enable" "0: LPSPI module is enabled in Doze mode,1: LPSPI module is disabled in Doze mode" newline bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "MEN,Module Enable" "0: Module is disabled,1: Module is enabled" group.long 0x14++0x03 line.long 0x00 "SR,Status" rbitfld.long 0x00 24. "MBF,Module Busy Flag" "0: LPSPI is idle,1: LPSPI is busy" eventfld.long 0x00 13. "DMF,Data Match Flag" "0: Have not received matching data,1: Have received matching data" newline eventfld.long 0x00 12. "REF,Receive Error Flag" "0: Receive FIFO has not overflowed,1: Receive FIFO has overflowed" eventfld.long 0x00 11. "TEF,Transmit Error Flag" "0: Transmit FIFO underrun has not occurred,1: Transmit FIFO underrun has occurred" newline eventfld.long 0x00 10. "TCF,Transfer Complete Flag" "0: All transfers have not completed,1: All transfers have completed" eventfld.long 0x00 9. "FCF,Frame Complete Flag" "0: Frame transfer has not completed,1: Frame transfer has completed" newline eventfld.long 0x00 8. "WCF,Word Complete Flag" "0: Transfer of a received word has not yet..,1: Transfer of a received word has completed" rbitfld.long 0x00 1. "RDF,Receive Data Flag" "0: Receive Data is not ready,1: Receive data is ready" newline rbitfld.long 0x00 0. "TDF,Transmit Data Flag" "0: Transmit data not requested,1: Transmit data is requested" group.long 0x18++0x03 line.long 0x00 "IER,Interrupt Enable" bitfld.long 0x00 13. "DMIE,Data Match Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 12. "REIE,Receive Error Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 11. "TEIE,Transmit Error Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 10. "TCIE,Transfer Complete Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 9. "FCIE,Frame Complete Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 8. "WCIE,Word Complete Interrupt Enable" "0: DISABLED,1: ENABLED" newline bitfld.long 0x00 1. "RDIE,Receive Data Interrupt Enable" "0: DISABLED,1: ENABLED" bitfld.long 0x00 0. "TDIE,Transmit Data Interrupt Enable" "0: DISABLED,1: ENABLED" group.long 0x1C++0x03 line.long 0x00 "DER,DMA Enable" bitfld.long 0x00 9. "FCDE,Frame Complete DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" bitfld.long 0x00 1. "RDDE,Receive Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" newline bitfld.long 0x00 0. "TDDE,Transmit Data DMA Enable" "0: DMA request is disabled,1: DMA request is enabled" group.long 0x20++0x03 line.long 0x00 "CFGR0,Configuration 0" bitfld.long 0x00 9. "RDMO,Receive Data Match Only" "0: Received data is stored in the receive FIFO..,1: Received data is discarded unless the SR[DMF].." bitfld.long 0x00 8. "CIRFIFO,Circular FIFO Enable" "0: Circular FIFO is disabled,1: Circular FIFO is enabled" newline bitfld.long 0x00 3. "HRDIR,Host Request Direction" "0: HREQ pin is configured as input,1: HREQ pin is configured as output" bitfld.long 0x00 2. "HRSEL,Host Request Select" "0: Host request input is the HREQ pin,1: Host request input is the input trigger" newline bitfld.long 0x00 1. "HRPOL,Host Request Polarity" "0: HREQ pin or input trigger is active high,1: HREQ pin or input trigger is active low" bitfld.long 0x00 0. "HREN,Host Request Enable" "0: Host request is disabled,1: Host request is enabled" group.long 0x24++0x03 line.long 0x00 "CFGR1,Configuration 1" bitfld.long 0x00 27. "PCSCFG,Peripheral Chip Select Configuration" "0: PCS[3:2] are configured for chip select..,1: PCS[3:2] are configured for half-duplex 4-bit.." bitfld.long 0x00 26. "OUTCFG,Output Configuration" "0: Output data retains last value when chip..,1: Output data is tristated when chip select is.." newline bitfld.long 0x00 24.--25. "PINCFG,Pin Configuration" "0: SIN is used for input data and SOUT is used..,1: SIN is used for both input and output data..,2: SOUT is used for both input and output data..,3: SOUT is used for input data and SIN is used.." bitfld.long 0x00 16.--18. "MATCFG,Match Configuration" "0: Match is disabled,?,2: Match is enabled is 1st data word is MATCH0..,3: Match is enabled on any data word equal..,4: Match is enabled on data match sequence,5: Match is enabled on data match sequence,6: ENABLED_DATAMATCH_110,7: ENABLED_DATAMATCH_111" newline bitfld.long 0x00 8.--11. "PCSPOL,Peripheral Chip Select Polarity" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "PARTIAL,Partial Enable" "0: Partial words in the receive shift register..,1: Partial words in the receive shift register.." newline bitfld.long 0x00 3. "NOSTALL,No Stall" "0: Transfers stall when the transmit FIFO is..,1: Transfers do not stall allowing transmit FIFO.." bitfld.long 0x00 2. "AUTOPCS,Automatic PCS" "0: Automatic PCS generation is disabled,1: Automatic PCS generation is enabled" newline bitfld.long 0x00 1. "SAMPLE,Sample Point" "0: Input data is sampled on SCK edge,1: Input data is sampled on delayed SCK edge" bitfld.long 0x00 0. "MASTER,Master Mode" "0: SLAVE_MODE,1: MASTER_MODE" group.long 0x30++0x03 line.long 0x00 "DMR0,Data Match 0" hexmask.long 0x00 0.--31. 1. "MATCH0,Match 0 Value" group.long 0x34++0x03 line.long 0x00 "DMR1,Data Match 1" hexmask.long 0x00 0.--31. 1. "MATCH1,Match 1 Value" group.long 0x40++0x03 line.long 0x00 "CCR,Clock Configuration" hexmask.long.byte 0x00 24.--31. 1. "SCKPCS,SCK-to-PCS Delay" hexmask.long.byte 0x00 16.--23. 1. "PCSSCK,PCS-to-SCK Delay" newline hexmask.long.byte 0x00 8.--15. 1. "DBT,Delay Between Transfers" hexmask.long.byte 0x00 0.--7. 1. "SCKDIV,SCK Divider" group.long 0x44++0x03 line.long 0x00 "CCR1,Clock Configuration 1" hexmask.long.byte 0x00 24.--31. 1. "SCKSCK,SCK Inter-Frame Delay" hexmask.long.byte 0x00 16.--23. 1. "PCSPCS,PCS to PCS delay" newline hexmask.long.byte 0x00 8.--15. 1. "SCKHLD,SCK Hold" hexmask.long.byte 0x00 0.--7. 1. "SCKSET,SCK Setup" group.long 0x58++0x03 line.long 0x00 "FCR,FIFO Control" bitfld.long 0x00 16.--19. "RXWATER,Receive FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "TXWATER,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x5C++0x03 line.long 0x00 "FSR,FIFO Status" bitfld.long 0x00 16.--20. "RXCOUNT,Receive FIFO Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. "TXCOUNT,Transmit FIFO Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x60++0x03 line.long 0x00 "TCR,Transmit Command" bitfld.long 0x00 31. "CPOL,Clock Polarity" "0: The inactive state value of SCK is low,1: The inactive state value of SCK is high" bitfld.long 0x00 30. "CPHA,Clock Phase" "0: CAPTURED,1: CHANGED" newline bitfld.long 0x00 27.--29. "PRESCALE,Prescaler Value" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" bitfld.long 0x00 24.--25. "PCS,Peripheral Chip Select" "0: Transfer using PCS[0],1: Transfer using PCS[1],2: Transfer using PCS[2],3: Transfer using PCS[3]" newline bitfld.long 0x00 23. "LSBF,LSB First" "0: Data is transferred MSB first,1: Data is transferred LSB first" bitfld.long 0x00 22. "BYSW,Byte Swap" "0: Byte swap is disabled,1: Byte swap is enabled" newline bitfld.long 0x00 21. "CONT,Continuous Transfer" "0: Continuous transfer is disabled,1: Continuous transfer is enabled" bitfld.long 0x00 20. "CONTC,Continuing Command" "0: Command word for start of new transfer,1: Command word for continuing transfer" newline bitfld.long 0x00 19. "RXMSK,Receive Data Mask" "0: Normal transfer,1: Receive data is masked" bitfld.long 0x00 18. "TXMSK,Transmit Data Mask" "0: Normal transfer,1: Mask transmit data" newline bitfld.long 0x00 16.--17. "WIDTH,Transfer Width" "0: 1 bit transfer,1: 2 bit transfer,2: 4 bit transfer,?..." hexmask.long.word 0x00 0.--11. 1. "FRAMESZ,Frame Size" wgroup.long 0x64++0x03 line.long 0x00 "TDR,Transmit Data" hexmask.long 0x00 0.--31. 1. "DATA,Transmit Data" rgroup.long 0x70++0x03 line.long 0x00 "RSR,Receive Status" bitfld.long 0x00 1. "RXEMPTY,RX FIFO Empty" "0: RX FIFO is not empty,1: RX FIFO is empty" bitfld.long 0x00 0. "SOF,Start Of Frame" "0: Subsequent data word received after PCS..,1: First data word received after PCS assertion" rgroup.long 0x74++0x03 line.long 0x00 "RDR,Receive Data" hexmask.long 0x00 0.--31. 1. "DATA,Receive Data" rgroup.long 0x78++0x03 line.long 0x00 "RDROR,Receive Data Read Only" hexmask.long 0x00 0.--31. 1. "DATA,Receive Data" wgroup.long 0x3FC++0x03 line.long 0x00 "TCBR,Transmit Command Burst" hexmask.long 0x00 0.--31. 1. "DATA,Command Data" repeat 128. (increment 0 1) (increment 0 0x04) wgroup.long ($2+0x400)++0x03 line.long 0x00 "TDBR[$1],Transmit Data Burst $1" hexmask.long 0x00 0.--31. 1. "DATA,Data" repeat.end repeat 128. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x600)++0x03 line.long 0x00 "RDBR[$1],Receive Data Burst $1" hexmask.long 0x00 0.--31. 1. "DATA,Data" repeat.end tree.end repeat.end tree.end tree "LPTMR" repeat 2. (list 0. 1.) (list ad:0x28093000 ad:0x28094000) tree "LPTMR$1" base $2 group.long 0x00++0x03 line.long 0x00 "CSR,Control Status Register" bitfld.long 0x00 8. "TDRE,Timer DMA Request Enable" "0: Timer DMA Request disabled,1: Timer DMA Request enabled" eventfld.long 0x00 7. "TCF,Timer Compare Flag" "0: The value of CNR is not equal to CMR + 1,1: The value of CNR is equal to CMR + 1" newline bitfld.long 0x00 6. "TIE,Timer Interrupt Enable" "0: Timer interrupt disabled,1: Timer interrupt enabled" bitfld.long 0x00 4.--5. "TPS,Timer Pin Select" "0: Pulse counter input 0 is selected,1: Pulse counter input 1 is selected,2: Pulse counter input 2 is selected,3: Pulse counter input 3 is selected" newline bitfld.long 0x00 3. "TPP,Timer Pin Polarity" "0: Pulse Counter input source is active-high and..,1: Pulse Counter input source is active-low and.." bitfld.long 0x00 2. "TFC,Timer Free-Running Counter" "0: CNR is reset whenever TCF is set,1: CNR is reset on overflow" newline bitfld.long 0x00 1. "TMS,Timer Mode Select" "0: Time Counter mode,1: Pulse Counter mode" bitfld.long 0x00 0. "TEN,Timer Enable" "0: LPTMR is disabled and internal logic is reset,1: LPTMR is enabled" group.long 0x04++0x03 line.long 0x00 "PSR,Prescale and Glitch Filter Register" bitfld.long 0x00 3.--6. "PRESCALE,Prescale/Glitch Filter Value" "0: Prescaler divides the prescaler clock by 2..,1: Prescaler divides the prescaler clock by 4..,2: Prescaler divides the prescaler clock by 8..,3: Prescaler divides the prescaler clock by 16..,4: Prescaler divides the prescaler clock by 32..,5: Prescaler divides the prescaler clock by 64..,6: Prescaler divides the prescaler clock by 128..,7: Prescaler divides the prescaler clock by 256..,8: Prescaler divides the prescaler clock by 512..,9: Prescaler divides the prescaler clock by 1024..,10: Prescaler divides the prescaler clock by..,11: Prescaler divides the prescaler clock by..,12: Prescaler divides the prescaler clock by..,13: Prescaler divides the prescaler clock by 16..,14: Prescaler divides the prescaler clock by 32..,15: Prescaler divides the prescaler clock by 65.." bitfld.long 0x00 2. "PBYP,Prescaler/Glitch Filter Bypass" "0: Prescaler/glitch filter is enabled,1: Prescaler/glitch filter is bypassed" newline bitfld.long 0x00 0.--1. "PCS,Prescaler/Glitch Filter Clock Select" "0: Prescaler/glitch filter clock 0 selected,1: Prescaler/glitch filter clock 1 selected,2: Prescaler/glitch filter clock 2 selected,3: Prescaler/glitch filter clock 3 selected" group.long 0x08++0x03 line.long 0x00 "CMR,Compare Register" hexmask.long.word 0x00 0.--15. 1. "COMPARE,Compare Value" group.long 0x0C++0x03 line.long 0x00 "CNR,Counter Register" hexmask.long.word 0x00 0.--15. 1. "COUNTER,Counter Value" tree.end repeat.end tree.end tree "LPUART" repeat 8. (list 0. 1. 2. 3. 4. 5. 6. 7.) (list ad:0x2809A000 ad:0x2809B000 ad:0x2810B000 ad:0x2810C000 ad:0x29390000 ad:0x293A0000 ad:0x29860000 ad:0x29870000) tree "LPUART$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 8.--15. 1. "RXFIFO,Receive FIFO Size" hexmask.long.byte 0x00 0.--7. 1. "TXFIFO,Transmit FIFO Size" group.long 0x08++0x03 line.long 0x00 "GLOBAL,LPUART Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" group.long 0x0C++0x03 line.long 0x00 "PINCFG,LPUART Pin Configuration Register" bitfld.long 0x00 0.--1. "TRGSEL,Trigger Select" "0: Input trigger is disabled,1: Input trigger is used instead of RXD pin input,2: Input trigger is used instead of CTS_B pin..,3: Input trigger is used to modulate the TXD pin.." group.long 0x10++0x03 line.long 0x00 "BAUD,LPUART Baud Rate Register" bitfld.long 0x00 31. "MAEN1,Match Address Mode Enable 1" "0: Normal operation,1: Enables automatic address matching or data.." bitfld.long 0x00 30. "MAEN2,Match Address Mode Enable 2" "0: Normal operation,1: Enables automatic address matching or data.." newline bitfld.long 0x00 29. "M10,10-bit Mode select" "0: Receiver and transmitter use 7-bit to 9-bit..,1: Receiver and transmitter use 10-bit data.." bitfld.long 0x00 24.--28. "OSR,Oversampling Ratio" "0: Writing 0 to this field results in an..,?,?,3: Oversampling ratio of 4 requires BOTHEDGE to..,4: Oversampling ratio of 5 requires BOTHEDGE to..,5: Oversampling ratio of 6 requires BOTHEDGE to..,6: Oversampling ratio of 7 requires BOTHEDGE to..,7: Oversampling ratio of 8,8: Oversampling ratio of 9,9: Oversampling ratio of 10,10: Oversampling ratio of 11,11: Oversampling ratio of 12,12: Oversampling ratio of 13,13: Oversampling ratio of 14,14: Oversampling ratio of 15,15: Oversampling ratio of 16,16: Oversampling ratio of 17,17: Oversampling ratio of 18,18: Oversampling ratio of 19,19: Oversampling ratio of 20,20: Oversampling ratio of 21,21: Oversampling ratio of 22,22: Oversampling ratio of 23,23: Oversampling ratio of 24,24: Oversampling ratio of 25,25: Oversampling ratio of 26,26: Oversampling ratio of 27,27: Oversampling ratio of 28,28: Oversampling ratio of 29,29: Oversampling ratio of 30,30: Oversampling ratio of 31,31: Oversampling ratio of 32" newline bitfld.long 0x00 23. "TDMAE,Transmitter DMA Enable" "0: DMA request disabled,1: DMA request enabled" bitfld.long 0x00 21. "RDMAE,Receiver Full DMA Enable" "0: DMA request disabled,1: DMA request enabled" newline bitfld.long 0x00 18.--19. "MATCFG,Match Configuration" "0: Address Match Wakeup,1: Idle Match Wakeup,2: Match On and Match Off,3: Enables RWU on Data Match and Match On/Off.." bitfld.long 0x00 17. "BOTHEDGE,Both Edge Sampling" "0: Receiver samples input data using the rising..,1: Receiver samples input data using the rising.." newline bitfld.long 0x00 16. "RESYNCDIS,Resynchronization Disable" "0: Resynchronization during received data word..,1: Resynchronization during received data word.." bitfld.long 0x00 15. "LBKDIE,LIN Break Detect Interrupt Enable" "0: Hardware interrupts from STAT[LBKDIF] flag..,1: Hardware interrupt is requested when.." newline bitfld.long 0x00 14. "RXEDGIE,RX Input Active Edge Interrupt Enable" "0: Hardware interrupts from STAT[RXEDGIF] are..,1: Hardware interrupt is requested when.." bitfld.long 0x00 13. "SBNS,Stop Bit Number Select" "0: One stop bit,1: Two stop bits" newline hexmask.long.word 0x00 0.--12. 1. "SBR,Baud Rate Modulo Divisor" group.long 0x14++0x03 line.long 0x00 "STAT,LPUART Status Register" eventfld.long 0x00 31. "LBKDIF,LIN Break Detect Interrupt Flag" "0: No LIN break character has been detected,1: LIN break character has been detected" eventfld.long 0x00 30. "RXEDGIF,RXD Pin Active Edge Interrupt Flag" "0: No active edge on the receive pin has occurred,1: An active edge on the receive pin has occurred" newline bitfld.long 0x00 29. "MSBF,MSB First" "0: LSB (bit0) is the first bit that is..,1: MSB (identified as bit9 bit8 bit7 or bit6) is.." bitfld.long 0x00 28. "RXINV,Receive Data Inversion" "0: Receive data not inverted,1: Receive data inverted" newline bitfld.long 0x00 27. "RWUID,Receive Wake Up Idle Detect" "0: During receive standby state (RWU = 1) the..,1: During receive standby state (RWU = 1) the.." bitfld.long 0x00 26. "BRK13,Break Character Generation Length" "0: Break character is transmitted with length of..,1: Break character is transmitted with length of.." newline bitfld.long 0x00 25. "LBKDE,LIN Break Detection Enable" "0: LIN break detect is disabled normal break..,1: LIN break detect is enabled" rbitfld.long 0x00 24. "RAF,Receiver Active Flag" "0: LPUART receiver idle waiting for a start bit,1: LPUART receiver active (RXD input not idle)" newline rbitfld.long 0x00 23. "TDRE,Transmit Data Register Empty Flag" "0: Transmit FIFO level is greater than watermark,1: Transmit FIFO level is equal or less than.." rbitfld.long 0x00 22. "TC,Transmission Complete Flag" "0: Transmitter active (sending data a preamble..,1: Transmitter idle (transmission activity.." newline rbitfld.long 0x00 21. "RDRF,Receive Data Register Full Flag" "0: Receive FIFO level is less than watermark,1: Receive FIFO level is equal or greater than.." eventfld.long 0x00 20. "IDLE,Idle Line Flag" "0: No idle line detected,1: Idle line is detected" newline eventfld.long 0x00 19. "OR,Receiver Overrun Flag" "0: No overrun,1: Receive overrun (new LPUART data lost)" eventfld.long 0x00 18. "NF,Noise Flag" "0: No noise detected,1: Noise detected in the received character in.." newline eventfld.long 0x00 17. "FE,Framing Error Flag" "0: No framing error detected,1: Framing error" eventfld.long 0x00 16. "PF,Parity Error Flag" "0: No parity error,1: Parity error" newline eventfld.long 0x00 15. "MA1F,Match 1 Flag" "0: Received data is not equal to MA1,1: Received data is equal to MA1" eventfld.long 0x00 14. "MA2F,Match 2 Flag" "0: Received data is not equal to MA2,1: Received data is equal to MA2" group.long 0x18++0x03 line.long 0x00 "CTRL,LPUART Control Register" bitfld.long 0x00 31. "R8T9,Receive Bit 8 / Transmit Bit 9" "0,1" bitfld.long 0x00 30. "R9T8,Receive Bit 9 / Transmit Bit 8" "0,1" newline bitfld.long 0x00 29. "TXDIR,TXD Pin Direction in Single-Wire Mode" "0: TXD pin is an input in single-wire mode,1: TXD pin is an output in single-wire mode" bitfld.long 0x00 28. "TXINV,Transmit Data Inversion" "0: Transmit data not inverted,1: Transmit data inverted" newline bitfld.long 0x00 27. "ORIE,Overrun Interrupt Enable" "0: OR interrupts disabled use polling,1: Hardware interrupt is requested when OR is set" bitfld.long 0x00 26. "NEIE,Noise Error Interrupt Enable" "0: NF interrupts disabled use polling,1: Hardware interrupt is requested when NF is set" newline bitfld.long 0x00 25. "FEIE,Framing Error Interrupt Enable" "0: FE interrupts disabled use polling,1: Hardware interrupt is requested when FE is set" bitfld.long 0x00 24. "PEIE,Parity Error Interrupt Enable" "0: PF interrupts disabled use polling),1: Hardware interrupt is requested when PF is set" newline bitfld.long 0x00 23. "TIE,Transmit Interrupt Enable" "0: Hardware interrupts from TDRE disabled,1: Hardware interrupt is requested when TDRE.." bitfld.long 0x00 22. "TCIE,Transmission Complete Interrupt Enable for" "0: Hardware interrupts from TC disabled,1: Hardware interrupt is requested when TC flag.." newline bitfld.long 0x00 21. "RIE,Receiver Interrupt Enable" "0: Hardware interrupts from RDRF disabled,1: Hardware interrupt is requested when RDRF.." bitfld.long 0x00 20. "ILIE,Idle Line Interrupt Enable" "0: Hardware interrupts from IDLE disabled use..,1: Hardware interrupt is requested when IDLE.." newline bitfld.long 0x00 19. "TE,Transmitter Enable" "0: Transmitter disabled,1: Transmitter enabled" bitfld.long 0x00 18. "RE,Receiver Enable" "0: Receiver disabled,1: Receiver enabled" newline bitfld.long 0x00 17. "RWU,Receiver Wakeup Control" "0: Normal receiver operation,1: LPUART receiver in standby waiting for wakeup.." bitfld.long 0x00 16. "SBK,Send Break" "0: Normal transmitter operation,1: Queue break character(s) to be sent" newline bitfld.long 0x00 15. "MA1IE,Match 1 Interrupt Enable" "0: MA1F interrupt disabled,1: MA1F interrupt enabled" bitfld.long 0x00 14. "MA2IE,Match 2 Interrupt Enable" "0: MA2F interrupt disabled,1: MA2F interrupt enabled" newline bitfld.long 0x00 11. "M7,7-Bit Mode Select" "0: Receiver and transmitter use 8-bit to 10-bit..,1: Receiver and transmitter use 7-bit data.." bitfld.long 0x00 8.--10. "IDLECFG,Idle Configuration" "0: 1 idle character,1: 2 idle characters,2: 4 idle characters,3: 8 idle characters,4: 16 idle characters,5: 32 idle characters,6: 64 idle characters,7: 128 idle characters" newline bitfld.long 0x00 7. "LOOPS,Loop Mode Select" "0: Normal operation - RXD and TXD use separate..,1: Loop mode or single-wire mode where.." bitfld.long 0x00 6. "DOZEEN,Doze Enable" "0: LPUART is enabled in Doze mode,1: LPUART is disabled in Doze mode but remains.." newline bitfld.long 0x00 5. "RSRC,Receiver Source Select" "0: Provided LOOPS is set RSRC is cleared selects..,1: Single-wire LPUART mode where the TXD pin is.." bitfld.long 0x00 4. "M,9-Bit or 8-Bit Mode Select" "0: Receiver and transmitter use 8-bit data..,1: Receiver and transmitter use 9-bit data.." newline bitfld.long 0x00 3. "WAKE,Receiver Wakeup Method Select" "0: Configures RWU for idle-line wakeup,1: Configures RWU with address-mark wakeup" bitfld.long 0x00 2. "ILT,Idle Line Type Select" "0: Idle character bit count starts after start bit,1: Idle character bit count starts after stop bit" newline bitfld.long 0x00 1. "PE,Parity Enable" "0: No hardware parity generation or checking,1: Parity enabled" bitfld.long 0x00 0. "PT,Parity Type" "0: Even parity,1: Odd parity" group.long 0x1C++0x03 line.long 0x00 "DATA,LPUART Data Register" rbitfld.long 0x00 15. "NOISY,Noisy Data Received" "0: The dataword is received without noise,1: The data is received with noise" rbitfld.long 0x00 14. "PARITYE,Parity Error" "0: The dataword is received without a parity error,1: The dataword is received with a parity error" newline bitfld.long 0x00 13. "FRETSC,Frame Error / Transmit Special Character" "0: The dataword is received without a frame..,1: The dataword is received with a frame error.." rbitfld.long 0x00 12. "RXEMPT,Receive Buffer Empty" "0: Receive buffer contains valid data,1: Receive buffer is empty data returned on read.." newline rbitfld.long 0x00 11. "IDLINE,Idle Line" "0: Receiver was not idle before receiving this..,1: Receiver was idle before receiving this.." bitfld.long 0x00 9. "R9T9,R9T9" "0,1" newline bitfld.long 0x00 8. "R8T8,R8T8" "0,1" bitfld.long 0x00 7. "R7T7,R7T7" "0,1" newline bitfld.long 0x00 6. "R6T6,R6T6" "0,1" bitfld.long 0x00 5. "R5T5,R5T5" "0,1" newline bitfld.long 0x00 4. "R4T4,R4T4" "0,1" bitfld.long 0x00 3. "R3T3,R3T3" "0,1" newline bitfld.long 0x00 2. "R2T2,R2T2" "0,1" bitfld.long 0x00 1. "R1T1,R1T1" "0,1" newline bitfld.long 0x00 0. "R0T0,R0T0" "0,1" group.long 0x20++0x03 line.long 0x00 "MATCH,LPUART Match Address Register" hexmask.long.word 0x00 16.--25. 1. "MA2,Match Address 2" hexmask.long.word 0x00 0.--9. 1. "MA1,Match Address 1" group.long 0x24++0x03 line.long 0x00 "MODIR,LPUART Modem IrDA Register" bitfld.long 0x00 18. "IREN,Infrared enable" "0: IR disabled,1: IR enabled" bitfld.long 0x00 16.--17. "TNP,Transmitter narrow pulse" "0: ONE_SAMPLE,1: TWO_SAMPLE,2: THREE_SAMPLE,3: FOUR_SAMPLE" newline bitfld.long 0x00 8.--10. "RTSWATER,Receive RTS Configuration" "0,1,2,3,4,5,6,7" bitfld.long 0x00 5. "TXCTSSRC,Transmit CTS Source" "0: CTS input is the CTS_B pin,1: CTS input is an internal connection to the.." newline bitfld.long 0x00 4. "TXCTSC,Transmit CTS Configuration" "0: CTS input is sampled at the start of each..,1: CTS input is sampled when the transmitter is.." bitfld.long 0x00 3. "RXRTSE,Receiver request-to-send enable" "0: The receiver has no effect on RTS,1: RTS is deasserted if the receiver data.." newline bitfld.long 0x00 2. "TXRTSPOL,Transmitter request-to-send polarity" "0: Transmitter RTS is active low,1: Transmitter RTS is active high" bitfld.long 0x00 1. "TXRTSE,Transmitter request-to-send enable" "0: The transmitter has no effect on RTS,1: When a character is placed into an empty.." newline bitfld.long 0x00 0. "TXCTSE,Transmitter clear-to-send enable" "0: CTS has no effect on the transmitter,1: Enables clear-to-send operation" group.long 0x28++0x03 line.long 0x00 "FIFO,LPUART FIFO Register" rbitfld.long 0x00 23. "TXEMPT,Transmit FIFO/Buffer Empty" "0: Transmit buffer is not empty,1: Transmit buffer is empty" rbitfld.long 0x00 22. "RXEMPT,Receive FIFO/Buffer Empty" "0: Receive buffer is not empty,1: Receive buffer is empty" newline eventfld.long 0x00 17. "TXOF,Transmitter FIFO Overflow Flag" "0: No transmit FIFO overflow has occurred since..,1: At least one transmit FIFO overflow has.." eventfld.long 0x00 16. "RXUF,Receiver FIFO Underflow Flag" "0: No receive FIFO underflow has occurred since..,1: At least one receive FIFO underflow has.." newline bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO Flush" "0: No flush operation occurs,1: All data in the transmit FIFO is cleared out" bitfld.long 0x00 14. "RXFLUSH,Receive FIFO Flush" "0: No flush operation occurs,1: All data in the receive FIFO/buffer is.." newline bitfld.long 0x00 10.--12. "RXIDEN,Receiver Idle Empty Enable" "0: Disable RDRF assertion due to partially..,1: Enable RDRF assertion due to partially filled..,2: Enable RDRF assertion due to partially filled..,3: Enable RDRF assertion due to partially filled..,4: Enable RDRF assertion due to partially filled..,5: Enable RDRF assertion due to partially filled..,6: Enable RDRF assertion due to partially filled..,7: Enable RDRF assertion due to partially filled.." bitfld.long 0x00 9. "TXOFE,Transmit FIFO Overflow Interrupt Enable" "0: TXOF flag does not generate an interrupt to..,1: TXOF flag generates an interrupt to the host" newline bitfld.long 0x00 8. "RXUFE,Receive FIFO Underflow Interrupt Enable" "0: RXUF flag does not generate an interrupt to..,1: RXUF flag generates an interrupt to the host" bitfld.long 0x00 7. "TXFE,Transmit FIFO Enable" "0: Transmit FIFO is not enabled,1: Transmit FIFO is enabled" newline rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO Buffer Depth" "0: Transmit FIFO/Buffer depth = 1 dataword,1: Transmit FIFO/Buffer depth = 4 datawords,2: Transmit FIFO/Buffer depth = 8 datawords,3: Transmit FIFO/Buffer depth = 16 datawords,4: Transmit FIFO/Buffer depth = 32 datawords,5: Transmit FIFO/Buffer depth = 64 datawords,6: Transmit FIFO/Buffer depth = 128 datawords,7: Transmit FIFO/Buffer depth = 256 datawords" bitfld.long 0x00 3. "RXFE,Receive FIFO Enable" "0: Receive FIFO is not enabled,1: Receive FIFO is enabled" newline rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO Buffer Depth" "0: Receive FIFO/Buffer depth = 1 dataword,1: Receive FIFO/Buffer depth = 4 datawords,2: Receive FIFO/Buffer depth = 8 datawords,3: Receive FIFO/Buffer depth = 16 datawords,4: Receive FIFO/Buffer depth = 32 datawords,5: Receive FIFO/Buffer depth = 64 datawords,6: Receive FIFO/Buffer depth = 128 datawords,7: Receive FIFO/Buffer depth = 256 datawords" group.long 0x2C++0x03 line.long 0x00 "WATER,LPUART Watermark Register" rbitfld.long 0x00 24.--27. "RXCOUNT,Receive Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--18. "RXWATER,Receive Watermark" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 8.--11. "TXCOUNT,Transmit Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--2. "TXWATER,Transmit Watermark" "0,1,2,3,4,5,6,7" tree.end repeat.end tree.end tree "MCM" base ad:0xE0080000 group.long 0x0C++0x03 line.long 0x00 "CPCR,Core Platform Control" bitfld.long 0x00 9. "CBRR,Crossbar Round-robin Arbitration Enable" "0: Fixed-priority arbitration,1: Round-robin arbitration" rgroup.long 0x20++0x03 line.long 0x00 "FADR,Store Buffer Fault Address" hexmask.long 0x00 0.--31. 1. "ADDRESS,Fault address" rgroup.long 0x24++0x03 line.long 0x00 "FATR,Store Buffer Fault Attributes" bitfld.long 0x00 31. "BEOVR,Bus Error Overrun" "0: No bus error overrun,1: Bus error overrun occurred" bitfld.long 0x00 8.--11. "BEMN,Bus Error Master Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 7. "BEWT,Bus Error Write" "0: Read access,1: Write access" bitfld.long 0x00 4.--5. "BESZ,Bus Error Size" "0: 8-bit access,1: 16-bit access,2: 32-bit access,?..." newline bitfld.long 0x00 1. "BEMD,Bus Error Privilege level" "0: User mode,1: Supervisor/privileged mode" bitfld.long 0x00 0. "BEDA,Bus Error Data Access Type" "0: Instruction,1: beda1" rgroup.long 0x28++0x03 line.long 0x00 "FDR,Store Buffer Fault Data" hexmask.long 0x00 0.--31. 1. "DATA,Fault Data" group.long 0x34++0x03 line.long 0x00 "CPCR2,Core Platform Control 2" bitfld.long 0x00 21. "LSCPWB,Limit System Cache Peripheral Write Buffering" "0: The system cache peripheral write buffering..,1: The system cache peripheral write buffering.." bitfld.long 0x00 20. "PSCMCTRL,Bypass Fixed System Cache Map" "0: The fixed system cache map is not bypassed,1: The fixed system cache map is bypassed" newline bitfld.long 0x00 17. "LCCPWB,Limit Code Cache Peripheral Write Buffering" "0: Code cache peripheral write buffering is not..,1: Code cache peripheral write buffering is.." bitfld.long 0x00 16. "PCCMCTRL,Bypass Fixed Code Cache Map" "0: The fixed code cache map is not bypassed,1: The fixed code cache map is bypassed" newline rbitfld.long 0x00 12.--15. "SBCS,System Bus Cache Size" "0: sbcs0000,1: sbcs0001,2: sbcs0010,3: sbcs0011,4: sbcs0100,5: sbcs0101,6: sbcs0110,?..." bitfld.long 0x00 11. "DSBC,Disable System Bus Cache" "0: System bus cache enabled,1: System bus cache disabled" newline bitfld.long 0x00 10. "FSCNA,Force System Cache to No Allocation" "0: Force system cache to allocation,1: Force system cache to no allocation" bitfld.long 0x00 9. "DSCWB,Disable System Cache Write Buffer" "0: Enable system cache write buffer,1: Disable system cache write buffer" newline bitfld.long 0x00 8. "CSBC,Clear System Bus Cache" "0: Not clear system bus cache,1: Clear system bus cache" rbitfld.long 0x00 4.--7. "CBCS,Code Bus Cache Size" "0: cbcs0000,1: cbcs0001,2: cbcs0010,3: cbcs0011,4: cbcs0100,5: cbcs0101,6: cbcs0110,?..." newline bitfld.long 0x00 3. "DCBC,Disable Code Bus cache" "0: Enable code bus cache,1: Disable code bus cache" bitfld.long 0x00 2. "FCCNA,Force Code Cache to No Allocation" "0: Force code cache to allocation,1: Force code cache to no allocation" newline bitfld.long 0x00 1. "DCCWB,Disable Code Cache Write Buffer" "0: Enable code cache write buffer,1: Disable code cache write buffer" bitfld.long 0x00 0. "CCBC,Clear Code Bus Cache" "0: No effect,1: Clear code bus cache" repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x400)++0x03 line.long 0x00 "LMDR$1,Local Memory Descriptor $1" rbitfld.long 0x00 31. "V,Valid" "0: LMEMn is not present,1: LMEMn is present" rbitfld.long 0x00 28. "LMSZH,LMEM Size Hole" "0: LMEMn is a power-of-2 capacity,1: LMEMn is a capacity of 0.75 * LMSZ" newline rbitfld.long 0x00 24.--27. "LMSZ,LMEM Size" "0: no LMEMn (0 KB),1: 1 KB LMEMn,2: 2 KB LMEMn,3: 4 KB LMEMn,4: 8 KB LMEMn,5: 16 KB LMEMn,6: 32 KB LMEMn,7: 64 KB LMEMn,8: 128 KB LMEMn,9: 256 KB LMEMn,10: 512 KB LMEMn,11: 1024 KB LMEMn,12: 2048 KB LMEMn,13: 4096 KB LMEMn,14: 8192 KB LMEMn,15: 16384 KB LMEMn" rbitfld.long 0x00 17.--19. "DPW,LMEM Data Path Width" "?,?,2: LMEMn 32-bit wide,3: LMEMn 64-bit wide,?..." newline bitfld.long 0x00 16. "RO,Read-Only" "0: Writes to the corresponding LMDRn[7:0] are..,1: Writes to the corresponding LMDRn[7:0] are.." rbitfld.long 0x00 13.--15. "MT,Memory Type" "0: SRAM_L,1: SRAM_U,2: PC Cache,3: PS Cache,?..." repeat.end repeat 2. (strings "2" "3" )(list 0x00 0x04 ) group.long ($2+0x408)++0x03 line.long 0x00 "LMDR$1,Local Memory Descriptor $1" rbitfld.long 0x00 31. "V,Valid" "0: LMEMn is not present,1: LMEMn is present" rbitfld.long 0x00 28. "LMSZH,LMEM Size Hole" "0: LMEMn is a power-of-2 capacity,1: LMEMn is a capacity of 0.75 * LMSZ" newline rbitfld.long 0x00 24.--27. "LMSZ,LMEM Size" "0: no LMEMn (0 KB),1: 1 KB LMEMn,2: 2 KB LMEMn,3: 4 KB LMEMn,4: 8 KB LMEMn,5: 16 KB LMEMn,6: 32 KB LMEMn,7: 64 KB LMEMn,8: 128 KB LMEMn,9: 256 KB LMEMn,10: 512 KB LMEMn,11: 1024 KB LMEMn,12: 2048 KB LMEMn,13: 4096 KB LMEMn,14: 8192 KB LMEMn,15: 16384 KB LMEMn" rbitfld.long 0x00 20.--23. "WY,Level 1 Cache Ways" "0: No Cache,?,2: 2-Way Set Associative,?,4: 4-Way Set Associative,?,?,?,8: 8-Way Set Associative,?..." newline rbitfld.long 0x00 17.--19. "DPW,LMEM Data Path Width" "?,?,2: LMEMn 32-bit wide,3: LMEMn 64-bit wide,?..." bitfld.long 0x00 16. "RO,Read-Only" "0: Writes to the corresponding LMDRn[7:0] are..,1: Writes to the corresponding LMDRn[7:0] are.." newline rbitfld.long 0x00 13.--15. "MT,Memory Type" "0: SRAM_L,1: SRAM_U,2: PC Cache,3: PS Cache,?..." repeat.end tree.end tree "MIPI_CSI_CSR (MIPI CSI CSR module)" base ad:0x2DAD0000 group.long 0x00++0x03 line.long 0x00 "PLM_CTRL,Pixel Link Master (PLM) Control" bitfld.long 0x00 12. "POLARITY,POLARITY" "0: HSYNC and VSYNC signals should be active low,1: HSYNC and VSYNC signals should be active high" bitfld.long 0x00 11. "VALID_OVERRIDE,Used to drive valid on the Pixel Link" "0,1" newline bitfld.long 0x00 10. "HSYNC_OVERIDE,Used to force the Pixel Link Master HSYNC input to be active" "0,1" bitfld.long 0x00 9. "VSYNC_OVERIDE,Used to force the Pixel Link Master VSYNC input to be active" "0,1" newline bitfld.long 0x00 1.--2. "ADDR,For selecting the destination module that receives the data" "0,1,2,3" bitfld.long 0x00 0. "ENABLE,Enable - for pixel link" "0,1" group.long 0x04++0x03 line.long 0x00 "PHY_CTRL,PHY_CTRL are outputs from CSR to the PHY or Controller" bitfld.long 0x00 22. "PD,PD" "0,1" bitfld.long 0x00 21. "RTERM_SEL,RTERM_SEL" "0,1" newline bitfld.long 0x00 4.--9. "S_PRG_RXHS_SETTLE,S_PRG_RXHS_SETTLE[5:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 3. "CONT_CLK_MODE,CONT_CLK_MODE" "0,1" newline bitfld.long 0x00 2. "DDRCLK_EN,DDRCLK_EN" "0,1" bitfld.long 0x00 1. "AUTO_PD_EN,AUTO_PD_EN" "0,1" newline bitfld.long 0x00 0. "RX_ENABLE,RX_ENABLE" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "PHY_STATUS,no description available" bitfld.long 0x00 0. "LANES_STOPPED,LANES_STOPPED (csi_controller.ulps_active[4:0] = 5'b0)" "0,1" group.long 0x30++0x03 line.long 0x00 "VC_INTERLACED,VC Interlaced - to drive the interlace port of the Pixel Link Master via the HSYNC/VSYNC generator" bitfld.long 0x00 3. "VC3,no description available" "0: DEFAULT,1: VC3 is interlaced" bitfld.long 0x00 2. "VC2,no description available" "0: DEFAULT,1: VC2 is interlaced" newline bitfld.long 0x00 1. "VC1,no description available" "0: DEFAULT,1: VC1 is interlaced" bitfld.long 0x00 0. "VC0,no description available" "0: DEFAULT,1: VC0 is interlaced" group.long 0x38++0x03 line.long 0x00 "DATA_TYPE_DISABLE_BF,no description available" hexmask.long.tbyte 0x00 0.--23. 1. "DATA_TYPE_DISABLE,Data Type Disable" group.long 0x40++0x03 line.long 0x00 "YUV420_FIRST_LINE_DATA_TYPE,no description available" bitfld.long 0x00 0. "YUV420_FIRST_LINE_DATA_TYPE,YUV420_FIRST_LINE_DATA_TYPE" "0: Odd (reset value),1: EVEN" group.long 0x44++0x03 line.long 0x00 "CONTROLLER_CLOCK_RESET_CONTROL,no description available" bitfld.long 0x00 0.--1. "CONTROLLER_CLOCK_RESET_CONTROL,CONTROLLER_CLOCK_RESET_CONTROL" "0: SW_RESETN (reset value is 0),1: CTL_CLK_OFF (connect to LPCG) (reset value is..,?..." group.long 0x48++0x03 line.long 0x00 "STREAM_FENCING_CONTROL,Stream Fencing Control (RW - to Pixel Reformatter)" bitfld.long 0x00 0.--3. "STREAM_FENCING_CONTROL,no description available" "0: Fence VC0,1: Fence VC1,2: Fence VC2,3: Fence VC3,?..." rgroup.long 0x4C++0x03 line.long 0x00 "STREAM_FENCING_STATUS,Stream Fencing Status (RO - from Pixel Reformatter)" bitfld.long 0x00 0.--3. "STREAM_FENCING_STATUS,no description available" "0: VC0 is fenced,1: VC1 is fenced,2: VC2 is fenced,3: VC3 is fenced,?..." tree.end tree "MRT (Multi-Rate Timer (MRT))" base ad:0x28107000 sif cpuis("IMX8UD3-CM33") group.long 0xF0++0x03 line.long 0x00 "MODCFG,Module Configuration" bitfld.long 0x00 31. "MULTITASK,Selects the operating mode for the INUSE flags and the IDLE_CH register" "0: Hardware status mode,1: MULTI_TASK_MODE" bitfld.long 0x00 4.--8. "NOB,Number Of Bits: identifies the number of timer bits in this MRT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--3. "NOC,Number Of Channels: identifies the number of channels in this MRT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xF4++0x03 line.long 0x00 "IDLE_CH,Idle Channel" bitfld.long 0x00 4.--7. "CHAN,Idle channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xF8++0x03 line.long 0x00 "IRQ_FLAG,Global Interrupt Flag" bitfld.long 0x00 3. "GFLAG3,Monitors the interrupt flag of TIMER3 and acts similarly to channel 0" "0,1" bitfld.long 0x00 2. "GFLAG2,Monitors the interrupt flag of TIMER2 and acts similarly to channel 0" "0,1" newline bitfld.long 0x00 1. "GFLAG1,Monitors the interrupt flag of TIMER1 and acts similarly to channel 0" "0,1" bitfld.long 0x00 0. "GFLAG0,Monitors the interrupt flag of TIMER0" "0: No pending interrupt,1: PENDING_INTERRUPT" rgroup.long 0xFC++0x03 line.long 0x00 "ID_CODE,Multi-Rate Timer ID code" hexmask.long 0x00 0.--31. 1. "ID_CODE,Multi-Rate Timer ID code" endif repeat 4. (increment 0 1)(increment 0 0x10) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x00)++0x03 line.long 0x00 "INTVAL,Time Interval Value" bitfld.long 0x00 31. "LOAD,Determines how the timer interval value (IVALUE -1) is loaded into the TIMER n register" "0: No force load,1: Force load" hexmask.long.tbyte 0x00 0.--23. 1. "IVALUE,Time interval load value" rgroup.long ($2+0x04)++0x03 line.long 0x00 "TIMER,Timer" hexmask.long.tbyte 0x00 0.--23. 1. "VALUE,Holds the current timer value of the down-counter" group.long ($2+0x08)++0x03 line.long 0x00 "CTRL,Control" bitfld.long 0x00 1.--2. "MODE,Selects the timer mode" "0: REPEAT_INTERRUPT_MODE,1: ONE_SHOT_INTERRUPT_MODE,2: ONE_SHOT_STALL_MODE,?..." bitfld.long 0x00 0. "INTEN,Enable the TIMER n interrupt" "0: Disabled,1: Enabled" group.long ($2+0x0C)++0x03 line.long 0x00 "STAT,Status" eventfld.long 0x00 2. "INUSE,Channel-In-Use flag" "0: This timer channel is not in use,1: This timer channel is in use" rbitfld.long 0x00 1. "RUN,Indicates the state of TIMER n" "0: Idle state,1: Running" newline bitfld.long 0x00 0. "INTFLAG,Monitors the interrupt flag" "0: No pending interrupt,1: Pending interrupt" endif tree.end repeat.end tree.end tree "MU (MUA)" sif cpuis("IMX8UD3-CM33")||cpuis("IMX8UD5-CM33")||cpuis("IMX8UD7-CM33")||cpuis("IMX8US3-CM33")||cpuis("IMX8US5-CM33") tree "MU0_MUA" base ad:0x28022000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUA Reset Interrupt Enable" "0: Disables Processor A-side MU Reset Interrupt..,1: Enables Processor A-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUA Receive Full Pending Flag" "0: No TRn register is written by MUB,1: Any TRn register is written by MUB" newline rbitfld.long 0x00 5. "TEP,MUA Transmit Empty Pending" "0: RRn register is not read by MUB,1: Any RRn register is read by MUB" rbitfld.long 0x00 4. "GIRP,MUA General Interrupt Pending" "0: No general interrupt request is sent from MUB,1: Any general interrupt request is sent from MUB" newline rbitfld.long 0x00 3. "FUP,MUA Flags Update Pending" "0: No pending update flags(initiated by MUA) are..,1: Pending update flags(initiated by MUA) are in.." rbitfld.long 0x00 2. "EP,MUA Side Event Pending" "0: The MUA side event is not pending,1: The MUA side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset,1: Processor B issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor B Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor B Reset Hold" "0: Release Processor B from reset,1: Hold Processor B in reset" newline bitfld.long 0x00 3. "CLKE,Processor B clock enable" "0: Processor B platform clock is gated when..,1: Processor B platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor A Hardware Reset Mask" "0: The MUB_CCR0[HR] bit is not masked and the..,1: The MUB_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor B Hardware Reset" "0: De-assert Hardware reset to the Processor B,1: Assert Hardware reset to the Processor B" bitfld.long 0x00 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor B Power-Down Mode Entry Interrupt Enable" "0: Disables Processor A Power-Down Mode Entry..,1: Enables Processor A Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor B Stop Mode Entry Interrupt Enable" "0: Disables Processor A Stop Mode Entry..,1: Enables Processor A Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor B Wait Mode Entry Interrupt Enable" "0: Disables Processor A Wait Mode Entry..,1: Enables Processor A Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor B Halt Mode Entry Interrupt Enable" "0: Disables Processor A Halt Mode Entry..,1: Enables Processor A Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disables Processor A Reset Assertion..,1: Enables Processor A Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor B Run Mode Entry Interrupt Enable" "0: Disables Processor A Run Mode Entry Interrupt..,1: Enables Processor A Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disables Processor A Hardware Reset Interrupt..,1: Enables Processor A Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry Interrupt Pending" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor B Stop Mode Entry Interrupt Pending" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry Interrupt Pending" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor B Halt Mode Entry Interrupt Pending" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x00 2. "RUN,Processor B Run Mode Entry Interrupt Pending" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUB_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor B Stop Mode Entry" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor B Halt Mode Entry" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" bitfld.long 0x00 2. "RUN,Processor B Run Mode Entry" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" bitfld.long 0x00 1. "F1,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 2. "GIE2,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 0. "GIE0,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 2. "GIR2,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" newline bitfld.long 0x00 1. "GIR1,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 0. "GIR0,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 2. "TE2,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 0. "TE0,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 2. "RF2,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." newline bitfld.long 0x00 1. "RF1,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 0. "RF0,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3")||cpuis("IMX8UD5")||cpuis("IMX8UD7")||cpuis("IMX8US3")||cpuis("IMX8US5") tree "MU0_MUB" base ad:0x29220000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUB Reset Interrupt Enable" "0: Disables Processor B-side MU Reset Interrupt..,1: Enables Processor B-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUB Receive Full Pending Flag" "0: No TRn register is written by MUA,1: Any TRn register is written by MUA" newline rbitfld.long 0x00 5. "TEP,MUB Transmit Empty Pending" "0: RRn register is not read by MUA,1: Any RRn register is read by MUA" rbitfld.long 0x00 4. "GIRP,MUB General Interrupt Pending" "0: No general interrupt request is sent from MUA,1: Any general interrupt request is sent from MUA" newline rbitfld.long 0x00 3. "FUP,MUB Flags Update Pending" "0: No pending update flags(initiated by MUB) are..,1: Pending update flags(initiated by MUB) are in.." rbitfld.long 0x00 2. "EP,MUB Side Event Pending" "0: The MUB side event is not pending,1: The MUB side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset,1: Processor A issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor A Reset Hold" "0: Release Processor A from reset,1: Hold Processor A in reset" newline bitfld.long 0x00 3. "CLKE,Processor A clock enable" "0: Processor A platform clock is gated when..,1: Processor A platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor B Hardware Reset Mask" "0: The MUA_CCR0[HR] bit is not masked and the..,1: The MUA_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor A Hardware Reset" "0: De-assert Hardware reset to the Processor A,1: Assert Hardware reset to the Processor A" bitfld.long 0x00 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor A Power-Down Mode Entry Interrupt Enable" "0: Disables Processor B Power-Down Mode Entry..,1: Enables Processor B Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disables Processor B Stop Mode Entry..,1: Enables Processor B Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disables Processor B Wait Mode Entry..,1: Enables Processor B Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disables Processor B Halt Mode Entry..,1: Enables Processor B Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disables Processor B Reset Assertion..,1: Enables Processor B Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disables Processor B Run Mode Entry Interrupt..,1: Enables Processor B Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disables Processor B Hardware Reset Interrupt..,1: Enables Processor B Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry Interrupt Pending" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x00 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUA_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor A Stop Mode Entry" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor A Halt Mode Entry" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" bitfld.long 0x00 2. "RUN,Processor A Run Mode Entry" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" bitfld.long 0x00 1. "F1,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 2. "GIE2,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 0. "GIE0,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 2. "GIR2,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" newline bitfld.long 0x00 1. "GIR1,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 0. "GIR0,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 2. "TE2,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 0. "TE0,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 2. "RF2,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." newline bitfld.long 0x00 1. "RF1,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 0. "RF0,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3-CM33")||cpuis("IMX8UD5-CM33")||cpuis("IMX8UD7-CM33")||cpuis("IMX8US3-CM33")||cpuis("IMX8US5-CM33") tree "MU1_MUA" base ad:0x28023000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUA Reset Interrupt Enable" "0: Disables Processor A-side MU Reset Interrupt..,1: Enables Processor A-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUA Receive Full Pending Flag" "0: No TRn register is written by MUB,1: Any TRn register is written by MUB" newline rbitfld.long 0x00 5. "TEP,MUA Transmit Empty Pending" "0: RRn register is not read by MUB,1: Any RRn register is read by MUB" rbitfld.long 0x00 4. "GIRP,MUA General Interrupt Pending" "0: No general interrupt request is sent from MUB,1: Any general interrupt request is sent from MUB" newline rbitfld.long 0x00 3. "FUP,MUA Flags Update Pending" "0: No pending update flags(initiated by MUA) are..,1: Pending update flags(initiated by MUA) are in.." rbitfld.long 0x00 2. "EP,MUA Side Event Pending" "0: The MUA side event is not pending,1: The MUA side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset,1: Processor B issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor B Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor B Reset Hold" "0: Release Processor B from reset,1: Hold Processor B in reset" newline bitfld.long 0x00 3. "CLKE,Processor B clock enable" "0: Processor B platform clock is gated when..,1: Processor B platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor A Hardware Reset Mask" "0: The MUB_CCR0[HR] bit is not masked and the..,1: The MUB_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor B Hardware Reset" "0: De-assert Hardware reset to the Processor B,1: Assert Hardware reset to the Processor B" bitfld.long 0x00 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor B Power-Down Mode Entry Interrupt Enable" "0: Disables Processor A Power-Down Mode Entry..,1: Enables Processor A Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor B Stop Mode Entry Interrupt Enable" "0: Disables Processor A Stop Mode Entry..,1: Enables Processor A Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor B Wait Mode Entry Interrupt Enable" "0: Disables Processor A Wait Mode Entry..,1: Enables Processor A Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor B Halt Mode Entry Interrupt Enable" "0: Disables Processor A Halt Mode Entry..,1: Enables Processor A Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disables Processor A Reset Assertion..,1: Enables Processor A Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor B Run Mode Entry Interrupt Enable" "0: Disables Processor A Run Mode Entry Interrupt..,1: Enables Processor A Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disables Processor A Hardware Reset Interrupt..,1: Enables Processor A Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry Interrupt Pending" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor B Stop Mode Entry Interrupt Pending" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry Interrupt Pending" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor B Halt Mode Entry Interrupt Pending" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x00 2. "RUN,Processor B Run Mode Entry Interrupt Pending" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUB_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor B Stop Mode Entry" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor B Halt Mode Entry" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" bitfld.long 0x00 2. "RUN,Processor B Run Mode Entry" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" bitfld.long 0x00 1. "F1,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 2. "GIE2,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 0. "GIE0,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 2. "GIR2,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" newline bitfld.long 0x00 1. "GIR1,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 0. "GIR0,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 2. "TE2,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 0. "TE0,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 2. "RF2,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." newline bitfld.long 0x00 1. "RF1,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 0. "RF0,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3")||cpuis("IMX8UD5")||cpuis("IMX8UD7")||cpuis("IMX8US3")||cpuis("IMX8US5") tree "MU1_MUB" base ad:0x28100000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUB Reset Interrupt Enable" "0: Disables Processor B-side MU Reset Interrupt..,1: Enables Processor B-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUB Receive Full Pending Flag" "0: No TRn register is written by MUA,1: Any TRn register is written by MUA" newline rbitfld.long 0x00 5. "TEP,MUB Transmit Empty Pending" "0: RRn register is not read by MUA,1: Any RRn register is read by MUA" rbitfld.long 0x00 4. "GIRP,MUB General Interrupt Pending" "0: No general interrupt request is sent from MUA,1: Any general interrupt request is sent from MUA" newline rbitfld.long 0x00 3. "FUP,MUB Flags Update Pending" "0: No pending update flags(initiated by MUB) are..,1: Pending update flags(initiated by MUB) are in.." rbitfld.long 0x00 2. "EP,MUB Side Event Pending" "0: The MUB side event is not pending,1: The MUB side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset,1: Processor A issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor A Reset Hold" "0: Release Processor A from reset,1: Hold Processor A in reset" newline bitfld.long 0x00 3. "CLKE,Processor A clock enable" "0: Processor A platform clock is gated when..,1: Processor A platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor B Hardware Reset Mask" "0: The MUA_CCR0[HR] bit is not masked and the..,1: The MUA_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor A Hardware Reset" "0: De-assert Hardware reset to the Processor A,1: Assert Hardware reset to the Processor A" bitfld.long 0x00 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor A Power-Down Mode Entry Interrupt Enable" "0: Disables Processor B Power-Down Mode Entry..,1: Enables Processor B Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disables Processor B Stop Mode Entry..,1: Enables Processor B Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disables Processor B Wait Mode Entry..,1: Enables Processor B Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disables Processor B Halt Mode Entry..,1: Enables Processor B Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disables Processor B Reset Assertion..,1: Enables Processor B Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disables Processor B Run Mode Entry Interrupt..,1: Enables Processor B Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disables Processor B Hardware Reset Interrupt..,1: Enables Processor B Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry Interrupt Pending" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x00 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUA_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor A Stop Mode Entry" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor A Halt Mode Entry" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" bitfld.long 0x00 2. "RUN,Processor A Run Mode Entry" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" bitfld.long 0x00 1. "F1,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 2. "GIE2,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 0. "GIE0,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 2. "GIR2,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" newline bitfld.long 0x00 1. "GIR1,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 0. "GIR0,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 2. "TE2,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 0. "TE0,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 2. "RF2,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." newline bitfld.long 0x00 1. "RF1,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 0. "RF0,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3-CM33")||cpuis("IMX8UD5-CM33")||cpuis("IMX8UD7-CM33")||cpuis("IMX8US3-CM33")||cpuis("IMX8US5-CM33") tree "MU2_MUA" base ad:0x28024000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUA Reset Interrupt Enable" "0: Disables Processor A-side MU Reset Interrupt..,1: Enables Processor A-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUA Receive Full Pending Flag" "0: No TRn register is written by MUB,1: Any TRn register is written by MUB" newline rbitfld.long 0x00 5. "TEP,MUA Transmit Empty Pending" "0: RRn register is not read by MUB,1: Any RRn register is read by MUB" rbitfld.long 0x00 4. "GIRP,MUA General Interrupt Pending" "0: No general interrupt request is sent from MUB,1: Any general interrupt request is sent from MUB" newline rbitfld.long 0x00 3. "FUP,MUA Flags Update Pending" "0: No pending update flags(initiated by MUA) are..,1: Pending update flags(initiated by MUA) are in.." rbitfld.long 0x00 2. "EP,MUA Side Event Pending" "0: The MUA side event is not pending,1: The MUA side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset,1: Processor B issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor B Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor B Reset Hold" "0: Release Processor B from reset,1: Hold Processor B in reset" newline bitfld.long 0x00 3. "CLKE,Processor B clock enable" "0: Processor B platform clock is gated when..,1: Processor B platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor A Hardware Reset Mask" "0: The MUB_CCR0[HR] bit is not masked and the..,1: The MUB_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor B Hardware Reset" "0: De-assert Hardware reset to the Processor B,1: Assert Hardware reset to the Processor B" bitfld.long 0x00 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor B Power-Down Mode Entry Interrupt Enable" "0: Disables Processor A Power-Down Mode Entry..,1: Enables Processor A Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor B Stop Mode Entry Interrupt Enable" "0: Disables Processor A Stop Mode Entry..,1: Enables Processor A Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor B Wait Mode Entry Interrupt Enable" "0: Disables Processor A Wait Mode Entry..,1: Enables Processor A Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor B Halt Mode Entry Interrupt Enable" "0: Disables Processor A Halt Mode Entry..,1: Enables Processor A Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disables Processor A Reset Assertion..,1: Enables Processor A Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor B Run Mode Entry Interrupt Enable" "0: Disables Processor A Run Mode Entry Interrupt..,1: Enables Processor A Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disables Processor A Hardware Reset Interrupt..,1: Enables Processor A Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry Interrupt Pending" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor B Stop Mode Entry Interrupt Pending" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry Interrupt Pending" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor B Halt Mode Entry Interrupt Pending" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x00 2. "RUN,Processor B Run Mode Entry Interrupt Pending" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUB_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor B Stop Mode Entry" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor B Halt Mode Entry" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" bitfld.long 0x00 2. "RUN,Processor B Run Mode Entry" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" bitfld.long 0x00 1. "F1,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 2. "GIE2,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 0. "GIE0,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 2. "GIR2,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" newline bitfld.long 0x00 1. "GIR1,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 0. "GIR0,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 2. "TE2,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 0. "TE0,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 2. "RF2,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." newline bitfld.long 0x00 1. "RF1,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 0. "RF0,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3")||cpuis("IMX8UD5")||cpuis("IMX8UD7")||cpuis("IMX8US3")||cpuis("IMX8US5") tree "MU2_MUB" base ad:0x2DA10000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUB Reset Interrupt Enable" "0: Disables Processor B-side MU Reset Interrupt..,1: Enables Processor B-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUB Receive Full Pending Flag" "0: No TRn register is written by MUA,1: Any TRn register is written by MUA" newline rbitfld.long 0x00 5. "TEP,MUB Transmit Empty Pending" "0: RRn register is not read by MUA,1: Any RRn register is read by MUA" rbitfld.long 0x00 4. "GIRP,MUB General Interrupt Pending" "0: No general interrupt request is sent from MUA,1: Any general interrupt request is sent from MUA" newline rbitfld.long 0x00 3. "FUP,MUB Flags Update Pending" "0: No pending update flags(initiated by MUB) are..,1: Pending update flags(initiated by MUB) are in.." rbitfld.long 0x00 2. "EP,MUB Side Event Pending" "0: The MUB side event is not pending,1: The MUB side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset,1: Processor A issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor A Reset Hold" "0: Release Processor A from reset,1: Hold Processor A in reset" newline bitfld.long 0x00 3. "CLKE,Processor A clock enable" "0: Processor A platform clock is gated when..,1: Processor A platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor B Hardware Reset Mask" "0: The MUA_CCR0[HR] bit is not masked and the..,1: The MUA_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor A Hardware Reset" "0: De-assert Hardware reset to the Processor A,1: Assert Hardware reset to the Processor A" bitfld.long 0x00 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor A Power-Down Mode Entry Interrupt Enable" "0: Disables Processor B Power-Down Mode Entry..,1: Enables Processor B Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disables Processor B Stop Mode Entry..,1: Enables Processor B Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disables Processor B Wait Mode Entry..,1: Enables Processor B Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disables Processor B Halt Mode Entry..,1: Enables Processor B Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disables Processor B Reset Assertion..,1: Enables Processor B Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disables Processor B Run Mode Entry Interrupt..,1: Enables Processor B Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disables Processor B Hardware Reset Interrupt..,1: Enables Processor B Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry Interrupt Pending" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x00 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUA_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor A Stop Mode Entry" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor A Halt Mode Entry" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" bitfld.long 0x00 2. "RUN,Processor A Run Mode Entry" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" bitfld.long 0x00 1. "F1,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 2. "GIE2,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 0. "GIE0,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 2. "GIR2,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" newline bitfld.long 0x00 1. "GIR1,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 0. "GIR0,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 2. "TE2,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 0. "TE0,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 2. "RF2,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." newline bitfld.long 0x00 1. "RF1,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 0. "RF0,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3-CM33")||cpuis("IMX8UD5-CM33")||cpuis("IMX8UD7-CM33")||cpuis("IMX8US3-CM33")||cpuis("IMX8US5-CM33") tree "MU3_MUA" base ad:0x29230000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUA Reset Interrupt Enable" "0: Disables Processor A-side MU Reset Interrupt..,1: Enables Processor A-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor B Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUA Receive Full Pending Flag" "0: No TRn register is written by MUB,1: Any TRn register is written by MUB" newline rbitfld.long 0x00 5. "TEP,MUA Transmit Empty Pending" "0: RRn register is not read by MUB,1: Any RRn register is read by MUB" rbitfld.long 0x00 4. "GIRP,MUA General Interrupt Pending" "0: No general interrupt request is sent from MUB,1: Any general interrupt request is sent from MUB" newline rbitfld.long 0x00 3. "FUP,MUA Flags Update Pending" "0: No pending update flags(initiated by MUA) are..,1: Pending update flags(initiated by MUA) are in.." rbitfld.long 0x00 2. "EP,MUA Side Event Pending" "0: The MUA side event is not pending,1: The MUA side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor B did not issue MU reset,1: Processor B issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor B Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor B Reset Hold" "0: Release Processor B from reset,1: Hold Processor B in reset" newline bitfld.long 0x00 3. "CLKE,Processor B clock enable" "0: Processor B platform clock is gated when..,1: Processor B platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor A Hardware Reset Mask" "0: The MUB_CCR0[HR] bit is not masked and the..,1: The MUB_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor B Hardware Reset" "0: De-assert Hardware reset to the Processor B,1: Assert Hardware reset to the Processor B" bitfld.long 0x00 0. "NMI,MUB Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor B Power-Down Mode Entry Interrupt Enable" "0: Disables Processor A Power-Down Mode Entry..,1: Enables Processor A Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor B Stop Mode Entry Interrupt Enable" "0: Disables Processor A Stop Mode Entry..,1: Enables Processor A Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor B Wait Mode Entry Interrupt Enable" "0: Disables Processor A Wait Mode Entry..,1: Enables Processor A Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor B Halt Mode Entry Interrupt Enable" "0: Disables Processor A Halt Mode Entry..,1: Enables Processor A Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor B Reset Assertion Interrupt Enable" "0: Disables Processor A Reset Assertion..,1: Enables Processor A Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor B Run Mode Entry Interrupt Enable" "0: Disables Processor A Run Mode Entry Interrupt..,1: Enables Processor A Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor A Hardware Reset Interrupt Enable" "0: Disables Processor A Hardware Reset Interrupt..,1: Enables Processor A Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry Interrupt Pending" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor B Stop Mode Entry Interrupt Pending" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry Interrupt Pending" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor B Halt Mode Entry Interrupt Pending" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" eventfld.long 0x00 2. "RUN,Processor B Run Mode Entry Interrupt Pending" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor A Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUB_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor B Power-Down Mode Entry" "0: Processor B did not enter Power-Down Mode,1: Processor B entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor B Stop Mode Entry" "0: Processor B did not enter Stop Mode,1: Processor B entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor B Wait Mode Entry" "0: Processor B did not enter Wait Mode,1: Processor B entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor B Halt Mode Entry" "0: Processor B did not enter Halt Mode,1: Processor B entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor B Reset Asserted Interrupt Pending" "0: Processor B did not enter reset,1: Processor B entered reset" bitfld.long 0x00 2. "RUN,Processor B Run Mode Entry" "0: Processor B did not enter Run Mode,1: Processor B entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor A Hardware Reset Interrupt Pending" "0: MUB didn't issue hardware reset to Processor A,1: MUB had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUA to MUB Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" bitfld.long 0x00 1. "F1,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUB to MUA Side Flag n" "0: Fn bit in the MUB FCR register is written 0,1: Fn bit in the MUB FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 2. "GIE2,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" bitfld.long 0x00 0. "GIE0,MUA General Purpose Interrupt Enable n" "0: Disables MUA General Interrupt n,1: Enables MUA General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 2. "GIR2,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" newline bitfld.long 0x00 1. "GIR1,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" bitfld.long 0x00 0. "GIR0,MUA General Purpose Interrupt Request n" "0: MUA General Interrupt n is not requested to..,1: MUA General Interrupt n is requested to the MUB" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUA General Interrupt Request Pending n" "0: MUA general purpose interrupt n is not pending,1: MUA general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUA Transmit Interrupt Enable n" "0: Disables MUA Transmit Interrupt n,1: Enables MUA Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 2. "TE2,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" bitfld.long 0x00 0. "TE0,MUA Transmit Register n Empty" "0: MUA TRn register is not empty,1: MUA TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUA Receive Interrupt Enable n" "0: Disables MUA Receive Interrupt n,1: Enables MUA Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 2. "RF2,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." newline bitfld.long 0x00 1. "RF1,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." bitfld.long 0x00 0. "RF0,MUA Receive Register n Full" "0: MUA RRn register is not full,1: MUA RRn register has received data from MUB.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUA Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUA Receive Data" repeat.end tree.end endif sif cpuis("IMX8UD3")||cpuis("IMX8UD5")||cpuis("IMX8UD7")||cpuis("IMX8US3")||cpuis("IMX8US5") tree "MU3_MUB" base ad:0x2DA20000 rgroup.long 0x00++0x03 line.long 0x00 "VER,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Set Number" rgroup.long 0x04++0x03 line.long 0x00 "PAR,Parameter Register" hexmask.long.byte 0x00 24.--31. 1. "FLAG_WIDTH,Flag Width" hexmask.long.byte 0x00 16.--23. 1. "GIR_NUM,General Interrupt Request Number" newline hexmask.long.byte 0x00 8.--15. 1. "RR_NUM,RR Number" hexmask.long.byte 0x00 0.--7. 1. "TR_NUM,Transmit Register Number" group.long 0x08++0x03 line.long 0x00 "CR,Control Register" bitfld.long 0x00 1. "MURIE,MUB Reset Interrupt Enable" "0: Disables Processor B-side MU Reset Interrupt..,1: Enables Processor B-side MU Reset Interrupt.." bitfld.long 0x00 0. "MUR,MU Reset" "0: Self clearing bit,1: Asserts the MU reset" group.long 0x0C++0x03 line.long 0x00 "SR,Status Register" rbitfld.long 0x00 7. "CEP,Processor A Event Pending Flag" "0: No core operation mode entry event pending,1: Any core operation mode entry event pending" rbitfld.long 0x00 6. "RFP,MUB Receive Full Pending Flag" "0: No TRn register is written by MUA,1: Any TRn register is written by MUA" newline rbitfld.long 0x00 5. "TEP,MUB Transmit Empty Pending" "0: RRn register is not read by MUA,1: Any RRn register is read by MUA" rbitfld.long 0x00 4. "GIRP,MUB General Interrupt Pending" "0: No general interrupt request is sent from MUA,1: Any general interrupt request is sent from MUA" newline rbitfld.long 0x00 3. "FUP,MUB Flags Update Pending" "0: No pending update flags(initiated by MUB) are..,1: Pending update flags(initiated by MUB) are in.." rbitfld.long 0x00 2. "EP,MUB Side Event Pending" "0: The MUB side event is not pending,1: The MUB side event is pending" newline eventfld.long 0x00 1. "MURIP,MU Reset Interrupt Pending" "0: Processor A did not issue MU reset,1: Processor A issued MU reset" rbitfld.long 0x00 0. "MURS,MUA and MUB Reset State" "0: MUA and MUB are out of reset,1: MUA or MUB is in reset state" group.long 0x10++0x03 line.long 0x00 "CCR0,Core Control Register 0" bitfld.long 0x00 5.--6. "BOOT,Slave Processor A Boot Config" "0: Processor Boot option 0,1: Processor Boot option 1,2: Processor Boot option 2,3: Processor Boot option 3" bitfld.long 0x00 4. "RSTH,Processor A Reset Hold" "0: Release Processor A from reset,1: Hold Processor A in reset" newline bitfld.long 0x00 3. "CLKE,Processor A clock enable" "0: Processor A platform clock is gated when..,1: Processor A platform clock is kept running.." bitfld.long 0x00 2. "HRM,Processor B Hardware Reset Mask" "0: The MUA_CCR0[HR] bit is not masked and the..,1: The MUA_CCR0[HR] bit is masked and the.." newline bitfld.long 0x00 1. "HR,Processor A Hardware Reset" "0: De-assert Hardware reset to the Processor A,1: Assert Hardware reset to the Processor A" bitfld.long 0x00 0. "NMI,MUA Non-maskable Interrupt Request" "0: Non-maskable interrupt is not issued to the..,1: Non-maskable interrupt is issued to the.." group.long 0x14++0x03 line.long 0x00 "CIER0,Core Interrupt Enable Register 0" bitfld.long 0x00 7. "PDIE,Processor A Power-Down Mode Entry Interrupt Enable" "0: Disables Processor B Power-Down Mode Entry..,1: Enables Processor B Power-Down Mode Entry.." bitfld.long 0x00 6. "STOPIE,Processor A Stop Mode Entry Interrupt Enable" "0: Disables Processor B Stop Mode Entry..,1: Enables Processor B Stop Mode Entry Interrupt.." newline bitfld.long 0x00 5. "WAITIE,Processor A Wait Mode Entry Interrupt Enable" "0: Disables Processor B Wait Mode Entry..,1: Enables Processor B Wait Mode Entry Interrupt.." bitfld.long 0x00 4. "HALTIE,Processor A Halt Mode Entry Interrupt Enable" "0: Disables Processor B Halt Mode Entry..,1: Enables Processor B Halt Mode Entry Interrupt.." newline bitfld.long 0x00 3. "RAIE,Processor A Reset Assertion Interrupt Enable" "0: Disables Processor B Reset Assertion..,1: Enables Processor B Reset Assertion Interrupt.." bitfld.long 0x00 2. "RUNIE,Processor A Run Mode Entry Interrupt Enable" "0: Disables Processor B Run Mode Entry Interrupt..,1: Enables Processor B Run Mode Entry Interrupt.." newline bitfld.long 0x00 1. "HRIE,Processor B Hardware Reset Interrupt Enable" "0: Disables Processor B Hardware Reset Interrupt..,1: Enables Processor B Hardware Reset Interrupt.." group.long 0x18++0x03 line.long 0x00 "CSSR0,Core Sticky Status Register 0" eventfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry Interrupt Pending" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" eventfld.long 0x00 6. "STOP,Processor A Stop Mode Entry Interrupt Pending" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline eventfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry Interrupt Pending" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" eventfld.long 0x00 4. "HALT,Processor A Halt Mode Entry Interrupt Pending" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline eventfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" eventfld.long 0x00 2. "RUN,Processor A Run Mode Entry Interrupt Pending" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline eventfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." eventfld.long 0x00 0. "NMIC,Processor B Non-Maskable-Interrupt Clear" "0: Default,1: Writing 1 clears the MUA_CCR0[NMI] bit" rgroup.long 0x1C++0x03 line.long 0x00 "CSR0,Core Status Register 0" bitfld.long 0x00 7. "PD,Processor A Power-Down Mode Entry" "0: Processor A did not enter Power-Down Mode,1: Processor A entered Power-Down Mode" bitfld.long 0x00 6. "STOP,Processor A Stop Mode Entry" "0: Processor A did not enter Stop Mode,1: Processor A entered Stop Mode" newline bitfld.long 0x00 5. "WAIT,Processor A Wait Mode Entry" "0: Processor A did not enter Wait Mode,1: Processor A entered Wait Mode" bitfld.long 0x00 4. "HALT,Processor A Halt Mode Entry" "0: Processor A did not enter Halt Mode,1: Processor A entered Halt Mode" newline bitfld.long 0x00 3. "RAIP,Processor A Reset Asserted Interrupt Pending" "0: Processor A did not enter reset,1: Processor A entered reset" bitfld.long 0x00 2. "RUN,Processor A Run Mode Entry" "0: Processor A did not enter Run Mode,1: Processor A entered Run Mode" newline bitfld.long 0x00 1. "HRIP,Processor B Hardware Reset Interrupt Pending" "0: MUA didn't issue hardware reset to Processor B,1: MUA had initiated a hardware reset to.." group.long 0x100++0x03 line.long 0x00 "FCR,Flag Control Register" bitfld.long 0x00 2. "F2,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" bitfld.long 0x00 1. "F1,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" newline bitfld.long 0x00 0. "F0,MUB to MUA Flag n" "0: Clears the Fn bit in the FSR register,1: Sets the Fn bit in the FSR register" rgroup.long 0x104++0x03 line.long 0x00 "FSR,Flag Status Register" bitfld.long 0x00 2. "F2,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" bitfld.long 0x00 1. "F1,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" newline bitfld.long 0x00 0. "F0,MUA to MUB Side Flag n" "0: Fn bit in the MUA FCR register is written 0,1: Fn bit in the MUA FCR register is written 1" group.long 0x110++0x03 line.long 0x00 "GIER,General Interrupt Enable Register" bitfld.long 0x00 3. "GIE3,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 2. "GIE2,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" newline bitfld.long 0x00 1. "GIE1,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" bitfld.long 0x00 0. "GIE0,MUB General Purpose Interrupt Enable n" "0: Disables MUB General Interrupt n,1: Enables MUB General Interrupt n" group.long 0x114++0x03 line.long 0x00 "GCR,General Control Register" bitfld.long 0x00 3. "GIR3,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 2. "GIR2,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" newline bitfld.long 0x00 1. "GIR1,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" bitfld.long 0x00 0. "GIR0,MUB General Purpose Interrupt Request n" "0: MUB General Interrupt n is not requested to..,1: MUB General Interrupt n is requested to the MUA" group.long 0x118++0x03 line.long 0x00 "GSR,General Status Register" eventfld.long 0x00 3. "GIP3,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 2. "GIP2,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" newline eventfld.long 0x00 1. "GIP1,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" eventfld.long 0x00 0. "GIP0,MUB General Interrupt Request Pending n" "0: MUB general purpose interrupt n is not pending,1: MUB general purpose interrupt n is pending" group.long 0x120++0x03 line.long 0x00 "TCR,Transmit Control Register" bitfld.long 0x00 3. "TIE3,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 2. "TIE2,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" newline bitfld.long 0x00 1. "TIE1,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" bitfld.long 0x00 0. "TIE0,MUB Transmit Interrupt Enable n" "0: Disables MUB Transmit Interrupt n,1: Enables MUB Transmit Interrupt n" rgroup.long 0x124++0x03 line.long 0x00 "TSR,Transmit Status Register" bitfld.long 0x00 3. "TE3,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 2. "TE2,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" newline bitfld.long 0x00 1. "TE1,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" bitfld.long 0x00 0. "TE0,MUB Transmit Register n Empty" "0: MUB TRn register is not empty,1: MUB TRn register is empty" group.long 0x128++0x03 line.long 0x00 "RCR,Receive Control Register" bitfld.long 0x00 3. "RIE3,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 2. "RIE2,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" newline bitfld.long 0x00 1. "RIE1,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" bitfld.long 0x00 0. "RIE0,MUB Receive Interrupt Enable n" "0: Disables MUB Receive Interrupt n,1: Enables MUB Receive Interrupt n" rgroup.long 0x12C++0x03 line.long 0x00 "RSR,Receive Status Register" bitfld.long 0x00 3. "RF3,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 2. "RF2,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." newline bitfld.long 0x00 1. "RF1,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." bitfld.long 0x00 0. "RF0,MUB Receive Register n Full" "0: MUB RRn register is not full,1: MUB RRn register has received data from MUA.." repeat 4. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TR[$1],Transmit Register $1" hexmask.long 0x00 0.--31. 1. "TR_DATA,MUB Transmit Data" repeat.end repeat 4. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x280)++0x03 line.long 0x00 "RR[$1],Receive Register $1" hexmask.long 0x00 0.--31. 1. "RR_DATA,MUB Receive Data" repeat.end tree.end endif tree.end tree "OCOTP_CTRL (OCOTP Controller)" base ad:0xEC00F000 repeat 504. (increment 0 1) (increment 0 0x4) group.long ($2+0x00)++0x03 line.long 0x00 "OTP_SHADOW[$1],One Time Programmable Controller shadow $1" hexmask.long 0x00 0.--31. 1. "SHADOW,OTP shadow" repeat.end group.long 0x800++0x03 line.long 0x00 "OTP_CTRL,Control/Address" hexmask.long.word 0x00 16.--31. 1. "WR_UNLOCK,Write unlock" bitfld.long 0x00 15. "WORDLOCK,Wordlock" "0,1" newline bitfld.long 0x00 12. "CRC_TEST,Set to start CRC calculation" "0,1" bitfld.long 0x00 11. "RELOAD_SHADOWS,Reload Shadow registers" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "ADDR,OTP word address" group.long 0x804++0x03 line.long 0x00 "OTP_PDN,Power-down" bitfld.long 0x00 0. "PDN,Power-down" "0,1" group.long 0x808++0x03 line.long 0x00 "OTP_WRITE_DATA,OTP programming data" hexmask.long 0x00 0.--31. 1. "WRITE_DATA,Write data" group.long 0x80C++0x03 line.long 0x00 "OTP_READ_CTRL,OTP read start control" bitfld.long 0x00 0. "READ,Read operation" "0,1" rgroup.long 0x810++0x03 line.long 0x00 "OTP_READ_DATA,OTP read data" hexmask.long 0x00 0.--31. 1. "READ_DATA,Fuse word read data from read operation" group.long 0x814++0x03 line.long 0x00 "OTP_CLK_DIV,OTP clock divider" rbitfld.long 0x00 31. "REQFLAG,Divider status flag" "0,1" bitfld.long 0x00 30. "HALT,Halts the divider counter" "0,1" newline bitfld.long 0x00 29. "RESET,Resets the divider counter" "0,1" bitfld.long 0x00 0.--3. "DIV,Clock divider value by -1 encoding" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8,8: Divide by 9,9: Divide by 10,10: Divide by 11,11: Divide by 12,12: Divide by 13,13: Divide by 14,14: Divide by 15,15: Divide by 16" group.long 0x81C++0x03 line.long 0x00 "OTP_CRC_ADDR,CRC address range" bitfld.long 0x00 24.--26. "CRC_REF_ADDR,CRC reference address" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 12.--20. 1. "CRC_END_ADDR,CRC ending fuse word address" newline hexmask.long.word 0x00 0.--8. 1. "CRC_START_ADDR,CRC starting fuse word address" rgroup.long 0x820++0x03 line.long 0x00 "OTP_CRC_VALUE,CRC result" hexmask.long 0x00 0.--31. 1. "CRC_VALUE,CRC result value" group.long 0x824++0x03 line.long 0x00 "OTP_STATUS,OTP Status" rbitfld.long 0x00 25. "FUSE_LATCHED,Indicate all shadows registers have been loaded with their corresponding fuse words when set by the controller after reset" "0,1" bitfld.long 0x00 24. "CRC_FAIL,CRC failed when set by hardware for CRC operation" "0,1" newline bitfld.long 0x00 23. "ERROR,Error" "0,1" rbitfld.long 0x00 22. "BUSY,OTP controller status" "0,1" newline bitfld.long 0x00 21. "DED_RELOAD,OTP Double Error Detect status of ECC during reload process" "0,1" bitfld.long 0x00 20. "SEC_RELOAD,OTP Single Error Corrected status of ECC during reload process" "0,1" newline rbitfld.long 0x00 14. "PWOK,OTP Power OK status" "0,1" rbitfld.long 0x00 13. "ACK,OTP ACK value" "0,1" newline bitfld.long 0x00 12. "PROGFAIL,OTP PROGFAIL status" "0,1" bitfld.long 0x00 11. "LOCKED,OTP LOCKED status during read/write operation" "0,1" newline bitfld.long 0x00 10. "DED,OTP Double Error Detection status of ECC during read operation" "0,1" bitfld.long 0x00 9. "SEC,OTP Single Error Corrected status of ECC during read operation" "0,1" rgroup.long 0x82C++0x03 line.long 0x00 "OTP_VERSION,VERSION ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR_VER,Major version" hexmask.long.byte 0x00 16.--23. 1. "MINOR_VER,Minor version" newline hexmask.long.word 0x00 0.--15. 1. "STEP_VER,Step version" tree.end tree "PCC" tree "PCC0" base ad:0x28030000 group.long 0x04++0x03 line.long 0x00 "PCC_DMA0_MP,PCC DMA0_MP Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x08++0x03 line.long 0x00 "PCC_DMA0_CH0,PCC DMA0_CH0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x0C++0x03 line.long 0x00 "PCC_DMA0_CH1,PCC DMA0_CH1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x10++0x03 line.long 0x00 "PCC_DMA0_CH2,PCC DMA0_CH2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x14++0x03 line.long 0x00 "PCC_DMA0_CH3,PCC DMA0_CH3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x18++0x03 line.long 0x00 "PCC_DMA0_CH4,PCC DMA0_CH4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x1C++0x03 line.long 0x00 "PCC_DMA0_CH5,PCC DMA0_CH5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x20++0x03 line.long 0x00 "PCC_DMA0_CH6,PCC DMA0_CH6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x24++0x03 line.long 0x00 "PCC_DMA0_CH7,PCC DMA0_CH7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x28++0x03 line.long 0x00 "PCC_DMA0_CH8,PCC DMA0_CH8 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x2C++0x03 line.long 0x00 "PCC_DMA0_CH9,PCC DMA0_CH9 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x30++0x03 line.long 0x00 "PCC_DMA0_CH10,PCC DMA0_CH10 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x34++0x03 line.long 0x00 "PCC_DMA0_CH11,PCC DMA0_CH11 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x38++0x03 line.long 0x00 "PCC_DMA0_CH12,PCC DMA0_CH12 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x3C++0x03 line.long 0x00 "PCC_DMA0_CH13,PCC DMA0_CH13 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x40++0x03 line.long 0x00 "PCC_DMA0_CH14,PCC DMA0_CH14 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x44++0x03 line.long 0x00 "PCC_DMA0_CH15,PCC DMA0_CH15 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x48++0x03 line.long 0x00 "PCC_DMA0_CH16,PCC DMA0_CH16 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x4C++0x03 line.long 0x00 "PCC_DMA0_CH17,PCC DMA0_CH17 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x50++0x03 line.long 0x00 "PCC_DMA0_CH18,PCC DMA0_CH18 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x54++0x03 line.long 0x00 "PCC_DMA0_CH19,PCC DMA0_CH19 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x58++0x03 line.long 0x00 "PCC_DMA0_CH20,PCC DMA0_CH20 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x5C++0x03 line.long 0x00 "PCC_DMA0_CH21,PCC DMA0_CH21 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x60++0x03 line.long 0x00 "PCC_DMA0_CH22,PCC DMA0_CH22 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x64++0x03 line.long 0x00 "PCC_DMA0_CH23,PCC DMA0_CH23 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x68++0x03 line.long 0x00 "PCC_DMA0_CH24,PCC DMA0_CH24 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x6C++0x03 line.long 0x00 "PCC_DMA0_CH25,PCC DMA0_CH25 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x70++0x03 line.long 0x00 "PCC_DMA0_CH26,PCC DMA0_CH26 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x74++0x03 line.long 0x00 "PCC_DMA0_CH27,PCC DMA0_CH27 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x78++0x03 line.long 0x00 "PCC_DMA0_CH28,PCC DMA0_CH28 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x7C++0x03 line.long 0x00 "PCC_DMA0_CH29,PCC DMA0_CH29 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x80++0x03 line.long 0x00 "PCC_DMA0_CH30,PCC DMA0_CH30 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x84++0x03 line.long 0x00 "PCC_DMA0_CH31,PCC DMA0_CH31 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x88++0x03 line.long 0x00 "PCC_MU0_A,PCC MU0_A Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x8C++0x03 line.long 0x00 "PCC_MU1_A,PCC MU1_A Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x90++0x03 line.long 0x00 "PCC_MU2_A,PCC MU2_A Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x98++0x03 line.long 0x00 "PCC_SYSPM0,PCC SYSPM0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xA0++0x03 line.long 0x00 "PCC_WUU0,PCC WUU0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xA4++0x03 line.long 0x00 "PCC_uPower_MUA_RTD,PCC uPower_MUA_RTD Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xB0++0x03 line.long 0x00 "PCC_WDOG0,PCC WDOG0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xB4++0x03 line.long 0x00 "PCC_WDOG1,PCC WDOG1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xC4++0x03 line.long 0x00 "PCC_TRDC_MGR,PCC TRDC_MGR Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xC8++0x03 line.long 0x00 "PCC_TRDC_MBC0,PCC TRDC_MBC0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xCC++0x03 line.long 0x00 "PCC_TRDC_MBC1,PCC TRDC_MBC1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xD0++0x03 line.long 0x00 "PCC_TRDC_MBC2,PCC TRDC_MBC2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xD4++0x03 line.long 0x00 "PCC_TRDC_MBC3,PCC TRDC_MBC3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xD8++0x03 line.long 0x00 "PCC_TRDC_MRC,PCC TRDC_MRC Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xDC++0x03 line.long 0x00 "PCC_SEMA42_0,PCC SEMA42_0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xE0++0x03 line.long 0x00 "PCC_BBNSM,PCC BBNSM Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xE4++0x03 line.long 0x00 "PCC_FlexSPI0,PCC FlexSPI0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xE8++0x03 line.long 0x00 "PCC_ROMCP0,PCC ROMCP0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xEC++0x03 line.long 0x00 "PCC_LPIT0,PCC LPIT0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xF0++0x03 line.long 0x00 "PCC_FlexIO0,PCC FlexIO0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xF4++0x03 line.long 0x00 "PCC_I3C0,PCC I3C0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xF8++0x03 line.long 0x00 "PCC_LPSPI0,PCC LPSPI0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xFC++0x03 line.long 0x00 "PCC_LPSPI1,PCC LPSPI1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x100++0x03 line.long 0x00 "PCC_ADC0,PCC ADC0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x104++0x03 line.long 0x00 "PCC_CMP0,PCC CMP0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x108++0x03 line.long 0x00 "PCC_CMP1,PCC CMP1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x10C++0x03 line.long 0x00 "PCC_DAC0,PCC DAC0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x110++0x03 line.long 0x00 "PCC_DAC1,PCC DAC1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x118++0x03 line.long 0x00 "PCC_CM33_Cache_Controller,PCC CM33_Cache_Controller Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x130++0x03 line.long 0x00 "PCC_Sentinel_LPUART,PCC Sentinel_LPUART Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." newline bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x138++0x03 line.long 0x00 "PCC_Powersys_WDOG,PCC Powersys_WDOG Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." newline bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x13C++0x03 line.long 0x00 "PCC_OCOTP,PCC OCOTP Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." tree.end tree "PCC1" base ad:0x28091000 group.long 0x0C++0x03 line.long 0x00 "PCC_TPIU,PCC TPIU Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." newline bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x18++0x03 line.long 0x00 "PCC_SWO,PCC SWO Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." newline bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x48++0x03 line.long 0x00 "PCC_FlexSPI1,PCC FlexSPI1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x4C++0x03 line.long 0x00 "PCC_LPTMR0,PCC LPTMR0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x50++0x03 line.long 0x00 "PCC_LPTMR1,PCC LPTMR1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x54++0x03 line.long 0x00 "PCC_TPM0,PCC TPM0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x58++0x03 line.long 0x00 "PCC_TPM1,PCC TPM1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x60++0x03 line.long 0x00 "PCC_LPI2C0,PCC LPI2C0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x64++0x03 line.long 0x00 "PCC_LPI2C1,PCC LPI2C1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x68++0x03 line.long 0x00 "PCC_LPUART0,PCC LPUART0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x6C++0x03 line.long 0x00 "PCC_LPUART1,PCC LPUART1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x70++0x03 line.long 0x00 "PCC_SAI0,PCC SAI0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x74++0x03 line.long 0x00 "PCC_SAI1,PCC SAI1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x78++0x03 line.long 0x00 "PCC_DIGITAL_FILTER_A,PCC DIGITAL_FILTER_A Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x7C++0x03 line.long 0x00 "PCC_DIGITAL_FILTER_B,PCC DIGITAL_FILTER_B Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x88++0x03 line.long 0x00 "PCC_ADC1,PCC ADC1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xA0++0x03 line.long 0x00 "PCC_Flexcan,PCC Flexcan Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xB4++0x03 line.long 0x00 "PCC_RGPIOA,PCC RGPIOA Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xB8++0x03 line.long 0x00 "PCC_RGPIOB,PCC RGPIOB Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xBC++0x03 line.long 0x00 "PCC_RGPIOC,PCC RGPIOC Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." tree.end tree "PCC2" base ad:0x28102000 group.long 0x00++0x03 line.long 0x00 "PCC_MU1_B,PCC MU1_B Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x04++0x03 line.long 0x00 "PCC_WDOG2,PCC WDOG2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x14++0x03 line.long 0x00 "PCC_TPM2,PCC TPM2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x18++0x03 line.long 0x00 "PCC_TPM3,PCC TPM3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x1C++0x03 line.long 0x00 "PCC_MRT,PCC MRT Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x20++0x03 line.long 0x00 "PCC_LPI2C2,PCC LPI2C2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x24++0x03 line.long 0x00 "PCC_LPI2C3,PCC LPI2C3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x28++0x03 line.long 0x00 "PCC_I3C1,PCC I3C1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x2C++0x03 line.long 0x00 "PCC_LPUART2,PCC LPUART2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x30++0x03 line.long 0x00 "PCC_LPUART3,PCC LPUART3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x34++0x03 line.long 0x00 "PCC_LPSPI2,PCC LPSPI2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x38++0x03 line.long 0x00 "PCC_LPSPI3,PCC LPSPI3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x3C++0x03 line.long 0x00 "PCC_SAI2,PCC SAI2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x40++0x03 line.long 0x00 "PCC_SAI3,PCC SAI3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x44++0x03 line.long 0x00 "PCC_MICFIL,PCC MICFIL Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." tree.end tree "PCC3" base ad:0x292D0000 group.long 0x04++0x03 line.long 0x00 "PCC_DMA1_MP,PCC DMA1_MP Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x08++0x03 line.long 0x00 "PCC_DMA1_CH0,PCC DMA1_CH0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x0C++0x03 line.long 0x00 "PCC_DMA1_CH1,PCC DMA1_CH1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x10++0x03 line.long 0x00 "PCC_DMA1_CH2,PCC DMA1_CH2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x14++0x03 line.long 0x00 "PCC_DMA1_CH3,PCC DMA1_CH3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x18++0x03 line.long 0x00 "PCC_DMA1_CH4,PCC DMA1_CH4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x1C++0x03 line.long 0x00 "PCC_DMA1_CH5,PCC DMA1_CH5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x20++0x03 line.long 0x00 "PCC_DMA1_CH6,PCC DMA1_CH6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x24++0x03 line.long 0x00 "PCC_DMA1_CH7,PCC DMA1_CH7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x28++0x03 line.long 0x00 "PCC_DMA1_CH8,PCC DMA1_CH8 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x2C++0x03 line.long 0x00 "PCC_DMA1_CH9,PCC DMA1_CH9 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x30++0x03 line.long 0x00 "PCC_DMA1_CH10,PCC DMA1_CH10 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x34++0x03 line.long 0x00 "PCC_DMA1_CH11,PCC DMA1_CH11 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x38++0x03 line.long 0x00 "PCC_DMA1_CH12,PCC DMA1_CH12 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x3C++0x03 line.long 0x00 "PCC_DMA1_CH13,PCC DMA1_CH13 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x40++0x03 line.long 0x00 "PCC_DMA1_CH14,PCC DMA1_CH14 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x44++0x03 line.long 0x00 "PCC_DMA1_CH15,PCC DMA1_CH15 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x48++0x03 line.long 0x00 "PCC_DMA1_CH16,PCC DMA1_CH16 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x4C++0x03 line.long 0x00 "PCC_DMA1_CH17,PCC DMA1_CH17 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x50++0x03 line.long 0x00 "PCC_DMA1_CH18,PCC DMA1_CH18 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x54++0x03 line.long 0x00 "PCC_DMA1_CH19,PCC DMA1_CH19 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x58++0x03 line.long 0x00 "PCC_DMA1_CH20,PCC DMA1_CH20 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x5C++0x03 line.long 0x00 "PCC_DMA1_CH21,PCC DMA1_CH21 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x60++0x03 line.long 0x00 "PCC_DMA1_CH22,PCC DMA1_CH22 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x64++0x03 line.long 0x00 "PCC_DMA1_CH23,PCC DMA1_CH23 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x68++0x03 line.long 0x00 "PCC_DMA1_CH24,PCC DMA1_CH24 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x6C++0x03 line.long 0x00 "PCC_DMA1_CH25,PCC DMA1_CH25 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x70++0x03 line.long 0x00 "PCC_DMA1_CH26,PCC DMA1_CH26 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x74++0x03 line.long 0x00 "PCC_DMA1_CH27,PCC DMA1_CH27 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x78++0x03 line.long 0x00 "PCC_DMA1_CH28,PCC DMA1_CH28 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x7C++0x03 line.long 0x00 "PCC_DMA1_CH29,PCC DMA1_CH29 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x80++0x03 line.long 0x00 "PCC_DMA1_CH30,PCC DMA1_CH30 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x84++0x03 line.long 0x00 "PCC_DMA1_CH31,PCC DMA1_CH31 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x88++0x03 line.long 0x00 "PCC_MU0_B,PCC MU0_B Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x8C++0x03 line.long 0x00 "PCC_MU3_A,PCC MU3_A Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x98++0x03 line.long 0x00 "PCC_WUU1,PCC WUU1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x9C++0x03 line.long 0x00 "PCC_SYSPM1,PCC SYSPM1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xA0++0x03 line.long 0x00 "PCC_uPower_MUA_APD,PCC uPower_MUA_APD Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xA8++0x03 line.long 0x00 "PCC_WDOG3,PCC WDOG3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xAC++0x03 line.long 0x00 "PCC_WDOG4,PCC WDOG4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xB8++0x03 line.long 0x00 "PCC_CAAM,PCC CAAM Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xBC++0x03 line.long 0x00 "PCC_XRDC_MGR,PCC XRDC_MGR Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xC0++0x03 line.long 0x00 "PCC_SEMA42_1,PCC SEMA42_1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xC4++0x03 line.long 0x00 "PCC_ROMCP1,PCC ROMCP1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xC8++0x03 line.long 0x00 "PCC_LPIT1,PCC LPIT1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xCC++0x03 line.long 0x00 "PCC_TPM4,PCC TPM4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xD0++0x03 line.long 0x00 "PCC_TPM5,PCC TPM5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xD4++0x03 line.long 0x00 "PCC_FlexIO1,PCC FlexIO1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xD8++0x03 line.long 0x00 "PCC_I3C2,PCC I3C2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xDC++0x03 line.long 0x00 "PCC_LPI2C4,PCC LPI2C4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xE0++0x03 line.long 0x00 "PCC_LPI2C5,PCC LPI2C5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xE4++0x03 line.long 0x00 "PCC_LPUART4,PCC LPUART4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xE8++0x03 line.long 0x00 "PCC_LPUART5,PCC LPUART5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xEC++0x03 line.long 0x00 "PCC_LPSPI4,PCC LPSPI4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xF0++0x03 line.long 0x00 "PCC_LPSPI5,PCC LPSPI5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" tree.end tree "PCC4" base ad:0x29800000 group.long 0x04++0x03 line.long 0x00 "PCC_FlexSPI2,PCC FlexSPI2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x08++0x03 line.long 0x00 "PCC_TPM6,PCC TPM6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x0C++0x03 line.long 0x00 "PCC_TPM7,PCC TPM7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x10++0x03 line.long 0x00 "PCC_LPI2C6,PCC LPI2C6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x14++0x03 line.long 0x00 "PCC_LPI2C7,PCC LPI2C7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x18++0x03 line.long 0x00 "PCC_LPUART6,PCC LPUART6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x1C++0x03 line.long 0x00 "PCC_LPUART7,PCC LPUART7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x20++0x03 line.long 0x00 "PCC_SAI4,PCC SAI4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x24++0x03 line.long 0x00 "PCC_SAI5,PCC SAI5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x28++0x03 line.long 0x00 "PCC_DIGITAL_FILTER_E,PCC DIGITAL_FILTER_E Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x2C++0x03 line.long 0x00 "PCC_DIGITAL_FILTER_F,PCC DIGITAL_FILTER_F Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x34++0x03 line.long 0x00 "PCC_uSDHC0,PCC uSDHC0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x38++0x03 line.long 0x00 "PCC_uSDHC1,PCC uSDHC1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x3C++0x03 line.long 0x00 "PCC_uSDHC2,PCC uSDHC2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x40++0x03 line.long 0x00 "PCC_USB0,PCC USB0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x44++0x03 line.long 0x00 "PCC_USB0_PHY,PCC USB0_PHY Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x48++0x03 line.long 0x00 "PCC_USB1,PCC USB1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x4C++0x03 line.long 0x00 "PCC_USB1_PHY,PCC USB1_PHY Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x50++0x03 line.long 0x00 "PCC_USB_XBAR,PCC USB_XBAR Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x54++0x03 line.long 0x00 "PCC_ENET,PCC ENET Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x78++0x03 line.long 0x00 "PCC_RGPIOE,PCC RGPIOE Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x7C++0x03 line.long 0x00 "PCC_RGPIOF,PCC RGPIOF Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." tree.end tree "PCC5" base ad:0x2DA70000 group.long 0x00++0x03 line.long 0x00 "PCC_DMA2_MP,PCC DMA2_MP Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x04++0x03 line.long 0x00 "PCC_DMA2_CH0,PCC DMA2_CH0 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x08++0x03 line.long 0x00 "PCC_DMA2_CH1,PCC DMA2_CH1 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x0C++0x03 line.long 0x00 "PCC_DMA2_CH2,PCC DMA2_CH2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x10++0x03 line.long 0x00 "PCC_DMA2_CH3,PCC DMA2_CH3 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x14++0x03 line.long 0x00 "PCC_DMA2_CH4,PCC DMA2_CH4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x18++0x03 line.long 0x00 "PCC_DMA2_CH5,PCC DMA2_CH5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x1C++0x03 line.long 0x00 "PCC_DMA2_CH6,PCC DMA2_CH6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x20++0x03 line.long 0x00 "PCC_DMA2_CH7,PCC DMA2_CH7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x24++0x03 line.long 0x00 "PCC_DMA2_CH8,PCC DMA2_CH8 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x28++0x03 line.long 0x00 "PCC_DMA2_CH9,PCC DMA2_CH9 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x2C++0x03 line.long 0x00 "PCC_DMA2_CH10,PCC DMA2_CH10 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x30++0x03 line.long 0x00 "PCC_DMA2_CH11,PCC DMA2_CH11 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x34++0x03 line.long 0x00 "PCC_DMA2_CH12,PCC DMA2_CH12 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x38++0x03 line.long 0x00 "PCC_DMA2_CH13,PCC DMA2_CH13 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x3C++0x03 line.long 0x00 "PCC_DMA2_CH14,PCC DMA2_CH14 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x40++0x03 line.long 0x00 "PCC_DMA2_CH15,PCC DMA2_CH15 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x44++0x03 line.long 0x00 "PCC_DMA2_CH16,PCC DMA2_CH16 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x48++0x03 line.long 0x00 "PCC_DMA2_CH17,PCC DMA2_CH17 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x4C++0x03 line.long 0x00 "PCC_DMA2_CH18,PCC DMA2_CH18 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x50++0x03 line.long 0x00 "PCC_DMA2_CH19,PCC DMA2_CH19 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x54++0x03 line.long 0x00 "PCC_DMA2_CH20,PCC DMA2_CH20 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x58++0x03 line.long 0x00 "PCC_DMA2_CH21,PCC DMA2_CH21 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x5C++0x03 line.long 0x00 "PCC_DMA2_CH22,PCC DMA2_CH22 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x60++0x03 line.long 0x00 "PCC_DMA2_CH23,PCC DMA2_CH23 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x64++0x03 line.long 0x00 "PCC_DMA2_CH24,PCC DMA2_CH24 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x68++0x03 line.long 0x00 "PCC_DMA2_CH25,PCC DMA2_CH25 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x6C++0x03 line.long 0x00 "PCC_DMA2_CH26,PCC DMA2_CH26 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x70++0x03 line.long 0x00 "PCC_DMA2_CH27,PCC DMA2_CH27 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x74++0x03 line.long 0x00 "PCC_DMA2_CH28,PCC DMA2_CH28 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x78++0x03 line.long 0x00 "PCC_DMA2_CH29,PCC DMA2_CH29 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x7C++0x03 line.long 0x00 "PCC_DMA2_CH30,PCC DMA2_CH30 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x80++0x03 line.long 0x00 "PCC_DMA2_CH31,PCC DMA2_CH31 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x84++0x03 line.long 0x00 "PCC_MU2_B,PCC MU2_B Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x88++0x03 line.long 0x00 "PCC_MU3_B,PCC MU3_B Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x8C++0x03 line.long 0x00 "PCC_SEMA42_2,PCC SEMA42_2 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xA0++0x03 line.long 0x00 "PCC_TPM8,PCC TPM8 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xA4++0x03 line.long 0x00 "PCC_SAI6,PCC SAI6 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xA8++0x03 line.long 0x00 "PCC_SAI7,PCC SAI7 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xAC++0x03 line.long 0x00 "PCC_SPDIF,PCC SPDIF Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xB0++0x03 line.long 0x00 "PCC_ISI,PCC ISI Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xB4++0x03 line.long 0x00 "PCC_CSI_REGS,PCC CSI_REGS Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xBC++0x03 line.long 0x00 "PCC_CSI,PCC CSI Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xC0++0x03 line.long 0x00 "PCC_DSI,PCC DSI Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xC8++0x03 line.long 0x00 "PCC_WDOG5,PCC WDOG5 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" rbitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xCC++0x03 line.long 0x00 "PCC_EPDC,PCC EPDC Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xD0++0x03 line.long 0x00 "PCC_PXP,PCC PXP Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0xF0++0x03 line.long 0x00 "PCC_GPU2D,PCC GPU2D Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xF4++0x03 line.long 0x00 "PCC_GPU3D,PCC GPU3D Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0xF8++0x03 line.long 0x00 "PCC_DC_Nano,PCC DC_Nano Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" newline bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x108++0x03 line.long 0x00 "PCC_LPDDR4,PCC LPDDR4 Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 28. "SWRST,Software Reset Control" "0: Software Reset,1: No SoftWare Reset" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." group.long 0x10C++0x03 line.long 0x00 "PCC_CSI_clk_ui,PCC CSI_clk_ui Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." newline bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x110++0x03 line.long 0x00 "PCC_CSI_clk_esc,PCC CSI_clk_esc Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 24.--26. "PCS,Peripheral Clock Source Select" "0: Clock is off (or test clock is enabled),1: Clock option 1,2: Clock option 2,3: Clock option 3,4: Clock option 4,5: Clock option 5,6: Clock option 6,7: Clock option 7" bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." newline bitfld.long 0x00 3. "FRAC,Peripheral Clock Divider Fraction" "0: Fractional value is 0,1: Fractional value is 1" bitfld.long 0x00 0.--2. "PCD,Peripheral Clock Divider Select" "0: Divide by 1,1: Divide by 2,2: Divide by 3,3: Divide by 4,4: Divide by 5,5: Divide by 6,6: Divide by 7,7: Divide by 8" group.long 0x114++0x03 line.long 0x00 "PCC_RGPIOD,PCC RGPIOD Register" rbitfld.long 0x00 31. "PR,Present" "0: Peripheral is not present,1: Peripheral is present" bitfld.long 0x00 30. "CGC,Clock Gate Control" "0: Clock disabled,1: Clock enabled" newline bitfld.long 0x00 22.--23. "SSADO,Stop and Stop ACK Domain Owner" "0: PCC ack to both domains' stop are always 0,1: PCC handles ACK from PERI for domain 0 stop..,2: PCC handles ACK from PERI for domain 1 stop..,3: PCC handles ACK from PERI for domain 0 stop.." tree.end tree.end tree "PDM (Pulse Density Modulation (Digital Microphone) Interface)" base ad:0x28111000 group.long 0x00++0x03 line.long 0x00 "CTRL_1,PDM Control register 1" bitfld.long 0x00 31. "MDIS,Module Disable" "0: Normal Mode,1: Disable/Low Leakage Mode" bitfld.long 0x00 30. "DOZEN,DOZE enable" "0,1" newline bitfld.long 0x00 29. "PDMIEN,PDM Enable" "0: PDM stopped,1: PDM operation started" bitfld.long 0x00 28. "DBG,Debug Mode" "0: Normal Mode,1: Debug Mode" newline bitfld.long 0x00 27. "SRES,Software-reset bit" "0: no_action,1: Software reset" bitfld.long 0x00 26. "DBGE,Module Enable in Debug" "0: Disabled after completing the current frame,1: enabled" newline bitfld.long 0x00 24.--25. "DISEL,DMA Interrupt Selection" "0: DMA and interrupt requests disabled,1: DMA requests enabled,2: Interrupt requests enabled,?..." bitfld.long 0x00 23. "ERREN,Error Interruption Enable" "0: Error Interrupts disabled,1: Error Interrupts enabled" newline bitfld.long 0x00 20. "DECFILS,Decimation filter enable in stop" "0: Decimation filter is stopped in SoC stop mode,1: Decimation filter is kept running in SoC stop.." bitfld.long 0x00 16. "FSYNCEN,Frame Synchronization Enable" "0: Frame synchronization disable,1: Frame synchronization enable" newline bitfld.long 0x00 7. "CH7EN,Channel 7 Enable" "0,1" bitfld.long 0x00 6. "CH6EN,Channel 6 Enable" "0,1" newline bitfld.long 0x00 5. "CH5EN,Channel 5 Enable" "0,1" bitfld.long 0x00 4. "CH4EN,Channel 4 Enable" "0,1" newline bitfld.long 0x00 3. "CH3EN,Channel 3 Enable" "0,1" bitfld.long 0x00 2. "CH2EN,Channel 2 Enable" "0,1" newline bitfld.long 0x00 1. "CH1EN,Channel 1 Enable" "0,1" bitfld.long 0x00 0. "CH0EN,Channel 0 Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "CTRL_2,PDM Control register 2" bitfld.long 0x00 25.--27. "QSEL,Quality Mode" "0: Medium quality mode,1: High quality mode,?,?,4: Very low quality 2 mode,5: Very low quality 1 mode,6: Very low quality 0 mode,7: Low quality mode" bitfld.long 0x00 16.--19. "CICOSR,CIC Decimation Rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 15. "CLKDIVDIS,Clock Divider Disable" "0: Clock Divider enable,1: Clock Divider disable" hexmask.long.byte 0x00 0.--7. 1. "CLKDIV,Clock Divider" group.long 0x08++0x03 line.long 0x00 "STAT,PDM Status register" rbitfld.long 0x00 31. "BSY_FIL,Busy Flag" "0: PDM is stopped,1: PDM is running" rbitfld.long 0x00 30. "FIR_RDY,Filter Data Ready" "0: Filter data is not reliable,1: Filter data is reliable" newline eventfld.long 0x00 7. "CH7F,Channel 7 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." eventfld.long 0x00 6. "CH6F,Channel 6 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." newline eventfld.long 0x00 5. "CH5F,Channel 5 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." eventfld.long 0x00 4. "CH4F,Channel 4 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." newline eventfld.long 0x00 3. "CH3F,Channel 3 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." eventfld.long 0x00 2. "CH2F,Channel 2 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." newline eventfld.long 0x00 1. "CH1F,Channel 1 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." eventfld.long 0x00 0. "CH0F,Channel 0 Output Data Flag" "0: Channel's FIFO did not reach the number of..,1: Channel's FIFO reached the number of elements.." group.long 0x10++0x03 line.long 0x00 "FIFO_CTRL,PDM FIFO Control register" bitfld.long 0x00 0.--2. "FIFOWMK,FIFO Watermark Control" "0,1,2,3,4,5,6,7" group.long 0x14++0x03 line.long 0x00 "FIFO_STAT,PDM FIFO Status register" eventfld.long 0x00 15. "FIFOUND7,FIFO Underflow Exception flag for Channel 7" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" eventfld.long 0x00 14. "FIFOUND6,FIFO Underflow Exception flag for Channel 6" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" newline eventfld.long 0x00 13. "FIFOUND5,FIFO Underflow Exception flag for Channel 5" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" eventfld.long 0x00 12. "FIFOUND4,FIFO Underflow Exception flag for Channel 4" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" newline eventfld.long 0x00 11. "FIFOUND3,FIFO Underflow Exception flag for Channel 3" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" eventfld.long 0x00 10. "FIFOUND2,FIFO Underflow Exception flag for Channel 2" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" newline eventfld.long 0x00 9. "FIFOUND1,FIFO Underflow Exception flag for Channel 1" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" eventfld.long 0x00 8. "FIFOUND0,FIFO Underflow Exception flag for Channel 0" "0: No exception by FIFO Underflow,1: Exception by FIFO underflow" newline eventfld.long 0x00 7. "FIFOOVF7,FIFO Overflow Exception flag for Channel 7" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x00 6. "FIFOOVF6,FIFO Overflow Exception flag for Channel 6" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" newline eventfld.long 0x00 5. "FIFOOVF5,FIFO Overflow Exception flag for Channel 5" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x00 4. "FIFOOVF4,FIFO Overflow Exception flag for Channel 4" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" newline eventfld.long 0x00 3. "FIFOOVF3,FIFO Overflow Exception flag for Channel 3" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x00 2. "FIFOOVF2,FIFO Overflow Exception flag for Channel 2" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" newline eventfld.long 0x00 1. "FIFOOVF1,FIFO Overflow Exception flag for Channel 1" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" eventfld.long 0x00 0. "FIFOOVF0,FIFO Overflow Exception flag for Channel 0" "0: No exception by FIFO overflow,1: Exception by FIFO overflow" repeat 8. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0x24)++0x03 line.long 0x00 "DATACH[$1],PDM Output Result Register $1" hexmask.long 0x00 0.--31. 1. "DATA,Channel n Data" repeat.end rgroup.long 0x64++0x03 line.long 0x00 "DC_CTRL,PDM DC Remover Control register" bitfld.long 0x00 14.--15. "DCCONFIG7,Channel 7 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" bitfld.long 0x00 12.--13. "DCCONFIG6,Channel 6 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" newline bitfld.long 0x00 10.--11. "DCCONFIG5,Channel 5 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" bitfld.long 0x00 8.--9. "DCCONFIG4,Channel 4 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" newline bitfld.long 0x00 6.--7. "DCCONFIG3,Channel 3 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" bitfld.long 0x00 4.--5. "DCCONFIG2,Channel 2 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" newline bitfld.long 0x00 2.--3. "DCCONFIG1,Channel 1 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" bitfld.long 0x00 0.--1. "DCCONFIG0,Channel 0 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (PDM_CLK=3.072MHz),1: DC Remover cut-off at 13.3Hz (PDM_CLK=3.072MHz),2: DC Remover cut-off at 40Hz (PDM_CLK=3.072MHz),3: DC Remover is bypassed" group.long 0x68++0x03 line.long 0x00 "DC_OUT_CTRL,PDM Output DC Remover Control register" bitfld.long 0x00 14.--15. "DCCONFIG7,Channel 7 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" bitfld.long 0x00 12.--13. "DCCONFIG6,Channel 6 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" newline bitfld.long 0x00 10.--11. "DCCONFIG5,Channel 5 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" bitfld.long 0x00 8.--9. "DCCONFIG4,Channel 4 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" newline bitfld.long 0x00 6.--7. "DCCONFIG3,Channel 3 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" bitfld.long 0x00 4.--5. "DCCONFIG2,Channel 2 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" newline bitfld.long 0x00 2.--3. "DCCONFIG1,Channel 1 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" bitfld.long 0x00 0.--1. "DCCONFIG0,Channel 0 DC Remover Configuration" "0: DC Remover cut-off at 20Hz (FS=48kHz),1: DC Remover cut-off at 13.3Hz (FS=48kHz),2: DC Remover cut-off at 40Hz (FS=48kHz),3: DC Remover is bypassed" group.long 0x74++0x03 line.long 0x00 "RANGE_CTRL,PDM Range Control register" bitfld.long 0x00 28.--31. "RANGEADJ7,Channel 7 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "RANGEADJ6,Channel 6 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "RANGEADJ5,Channel 5 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "RANGEADJ4,Channel 4 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "RANGEADJ3,Channel 3 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "RANGEADJ2,Channel 2 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "RANGEADJ1,Channel 1 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "RANGEADJ0,Channel 0 Range Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x7C++0x03 line.long 0x00 "RANGE_STAT,PDM Range Status register" eventfld.long 0x00 23. "RANGEUNF7,Channel 7 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x00 22. "RANGEUNF6,Channel 6 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x00 21. "RANGEUNF5,Channel 5 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x00 20. "RANGEUNF4,Channel 4 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x00 19. "RANGEUNF3,Channel 3 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x00 18. "RANGEUNF2,Channel 2 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x00 17. "RANGEUNF1,Channel 1 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" eventfld.long 0x00 16. "RANGEUNF0,Channel 0 Range Underflow Error Flag" "0: No exception by range underflow,1: Exception by range underflow" newline eventfld.long 0x00 7. "RANGEOVF7,Channel 7 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x00 6. "RANGEOVF6,Channel 6 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" newline eventfld.long 0x00 5. "RANGEOVF5,Channel 5 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x00 4. "RANGEOVF4,Channel 4 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" newline eventfld.long 0x00 3. "RANGEOVF3,Channel 3 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x00 2. "RANGEOVF2,Channel 2 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" newline eventfld.long 0x00 1. "RANGEOVF1,Channel 1 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" eventfld.long 0x00 0. "RANGEOVF0,Channel 0 Range Overflow Error Flag" "0: No exception by range overflow,1: Exception by range overflow" group.long 0x80++0x03 line.long 0x00 "FSYNC_CTRL,Frame Synchronization Control register" hexmask.long 0x00 0.--31. 1. "FSYNCLEN,Frame Synchronization Window Length" rgroup.long 0x84++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x88++0x03 line.long 0x00 "PARAM,Parameter Register" bitfld.long 0x00 24.--27. "NUM_HWVAD,Number of HWVADs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 19. "HWVAD_ZCD,HWVAD zero-cross detector active" "0,1" newline bitfld.long 0x00 17. "HWVAD_ENERGY_MODE,HWVAD energy mode active" "0,1" bitfld.long 0x00 16. "HWVAD,HWVAD active" "0,1" newline bitfld.long 0x00 11. "DC_OUT_BYPASS,Output DC remover bypass" "0: DC remover active,1: DC remover disabled" bitfld.long 0x00 10. "DC_BYPASS,Input DC remover bypass" "0: DC remover active,1: DC remover disabled" newline bitfld.long 0x00 9. "LOW_POWER,Low power decimation filter" "0,1" bitfld.long 0x00 8. "FIL_OUT_WIDTH_24B,Filter Output Width" "0: Filter output width is 16 bits,1: Filter output width is 24 bits" newline bitfld.long 0x00 4.--7. "FIFO_PTRWID,FIFO Pointer Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "NPAIR,Number of microphone pairs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "VAD0_CTRL_1,Voice Activity Detector 0 Control register" bitfld.long 0x00 24.--26. "VADCHSEL,Voice Activity Detector Channel Selector" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--19. "VADCICOSR,Voice Activity Detector CIC Oversampling Rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--12. "VADINITT,Voice Activity Detector Initialization Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. "VADST10,Voice Activity Detector Internal Filters Initialization" "0: Normal operation,1: Filters are initialized" newline bitfld.long 0x00 3. "VADERIE,Voice Activity Detector Error Interruption Enable" "0: HWVAD Error Interrupts disabled,1: HWVAD Error Interrupts enabled" bitfld.long 0x00 2. "VADIE,Voice Activity Detector Interruption Enable" "0: HWVAD Interrupts disabled,1: HWVAD Interrupts enabled" newline bitfld.long 0x00 1. "VADRST,Voice Activity Detector Reset" "0,1" bitfld.long 0x00 0. "VADEN,Voice Activity Detector Enable" "0: The HWVAD is disabled,1: The HWVAD is enabled" group.long 0x94++0x03 line.long 0x00 "VAD0_CTRL_2,Voice Activity Detector 0 Control register" bitfld.long 0x00 31. "VADFRENDIS,Voice Activity Detector Frame Energy Disable" "0: Frame energy calculus enabled,1: Frame energy calculus disabled" bitfld.long 0x00 30. "VADPREFEN,Voice Activity Detector Pre Filter Enable" "0: Pre-filter is bypassed,1: Pre-filter is enabled" newline bitfld.long 0x00 28. "VADFOUTDIS,Voice Activity Detector Force Output Disable" "0: Output is enabled,1: Output is disabled" bitfld.long 0x00 16.--21. "VADFRAMET,Voice Activity Detector Frame Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--11. "VADINPGAIN,Voice Activity Detector Input Gain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--1. "VADHPF,Voice Activity Detector High-Pass Filter" "0: Filter bypassed,1: Cut-off frequency at 1750Hz,2: Cut-off frequency at 215Hz,3: Cut-off frequency at 102Hz" group.long 0x98++0x03 line.long 0x00 "VAD0_STAT,Voice Activity Detector 0 Status register" rbitfld.long 0x00 31. "VADINITF,Voice Activity Detector Initialization Flag" "0: HWVAD is not being initialized,1: HWVAD is being initialized" eventfld.long 0x00 16. "VADINSATF,Voice Activity Detector Input Saturation Flag" "0: no_exception,1: exception" newline rbitfld.long 0x00 15. "VADEF,Voice Activity Detector Event Flag" "0: Voice activity not detected,1: Voice activity detected" eventfld.long 0x00 0. "VADIF,Voice Activity Detector Interrupt Flag" "0: Voice activity not detected,1: Voice activity detected" group.long 0x9C++0x03 line.long 0x00 "VAD0_SCONFIG,Voice Activity Detector 0 Signal Configuration" bitfld.long 0x00 31. "VADSFILEN,Voice Activity Detector Signal Filter Enable" "0: Signal filter is disabled,1: Signal filter is enabled" bitfld.long 0x00 30. "VADSMAXEN,Voice Activity Detector Signal Maximum Enable" "0: Maximum block is bypassed,1: Maximum block is enabled" newline bitfld.long 0x00 0.--3. "VADSGAIN,Voice Activity Detector Signal Gain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x03 line.long 0x00 "VAD0_NCONFIG,Voice Activity Detector 0 Noise Configuration" bitfld.long 0x00 31. "VADNFILAUTO,Voice Activity Detector Noise Filter Auto" "0: Noise filter is always enabled,1: Noise filter is enabled/disabled based on.." bitfld.long 0x00 30. "VADNMINEN,Voice Activity Detector Noise Minimum Enable" "0: Minimum block is bypassed,1: Minimum block is enabled" newline bitfld.long 0x00 29. "VADNDECEN,Voice Activity Detector Noise Decimation Enable" "0: Noise input is not decimated,1: Noise input is decimated" bitfld.long 0x00 28. "VADNOREN,Voice Activity Detector Noise OR Enable" "0: Noise input is not decimated,1: Noise input is decimated" newline bitfld.long 0x00 8.--12. "VADNFILADJ,Voice Activity Detector Noise Filter Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--3. "VADNGAIN,Voice Activity Detector Noise Gain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xA4++0x03 line.long 0x00 "VAD0_NDATA,Voice Activity Detector 0 Noise Data" hexmask.long.word 0x00 0.--15. 1. "VADNDATA,Voice Activity Detector Noise Data" group.long 0xA8++0x03 line.long 0x00 "VAD0_ZCD,Voice Activity Detector 0 Zero-Crossing Detector" hexmask.long.word 0x00 16.--25. 1. "VADZCDTH,Zero-Crossing Detector Threshold" bitfld.long 0x00 8.--11. "VADZCDADJ,Zero-Crossing Detector Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "VADZCDAND,Zero-Crossing Detector AND Behavior" "0: The ZCD result is OR'ed with the energy-based..,1: The ZCD result is AND'ed with the.." bitfld.long 0x00 2. "VADZCDAUTO,Zero-Crossing Detector Automatic Threshold" "0: The ZCD threshold is not estimated..,1: The ZCD threshold is estimated automatically" newline bitfld.long 0x00 0. "VADZCDEN,Zero-Crossing Detector Enable" "0: The ZCD is disabled,1: The ZCD is enabled" tree.end tree "PHY (USBPHY)" tree "USB0_PHY" base ad:0x29910000 group.long 0x00++0x03 line.long 0x00 "PWD,USB PHY Power-Down Register" bitfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0: Normal operation,1: Power-down the entire USB PHY receiver block.." newline bitfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0: Normal operation,1: Power-down the USB high-speed differential.." newline bitfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0: Normal operation,1: Power-down the USB full-speed differential.." newline bitfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0: Normal operation,1: Power-down the USB high-speed receiver.." newline bitfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0: Normal operation,1: Power-down the USB PHY transmit V-to-I.." newline bitfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0: Normal operation,1: Power-down the USB PHY current bias block for.." newline bitfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0: Normal operation,1: Power-down the USB full-speed drivers" group.long 0x04++0x03 line.long 0x00 "PWD_SET,USB PHY Power-Down Register" bitfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0,1" newline bitfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0,1" newline bitfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0,1" newline bitfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0,1" newline bitfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0,1" newline bitfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0,1" newline bitfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0,1" group.long 0x08++0x03 line.long 0x00 "PWD_CLR,USB PHY Power-Down Register" eventfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0,1" newline eventfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0,1" newline eventfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0,1" newline eventfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0,1" newline eventfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0,1" newline eventfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0,1" newline eventfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0,1" group.long 0x0C++0x03 line.long 0x00 "PWD_TOG,USB PHY Power-Down Register" bitfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0,1" newline bitfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0,1" newline bitfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0,1" newline bitfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0,1" newline bitfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0,1" newline bitfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0,1" newline bitfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0,1" group.long 0x10++0x03 line.long 0x00 "TX,USB PHY Transmitter Control Register" bitfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "D_CAL,D_CAL" "0: Maximum current approximately 19% above nominal,?,?,?,?,?,?,7: NOMINAL,?,?,?,?,?,?,?,15: Minimum current approximately 19% below.." group.long 0x14++0x03 line.long 0x00 "TX_SET,USB PHY Transmitter Control Register" bitfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "D_CAL,D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x03 line.long 0x00 "TX_CLR,USB PHY Transmitter Control Register" eventfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "D_CAL,D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x03 line.long 0x00 "TX_TOG,USB PHY Transmitter Control Register" bitfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "D_CAL,D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x03 line.long 0x00 "RX,USB PHY Receiver Control Register" bitfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0: Normal operation,1: Use the output of the USB_DP single-ended.." newline bitfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0: Trip-Level Voltage is 0.56875 V,1: Trip-Level Voltage is 0.55000 V,2: Trip-Level Voltage is 0.58125 V,3: Trip-Level Voltage is 0.60000 V,?..." newline bitfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0: Trip-Level Voltage is 0.1000 V,1: Trip-Level Voltage is 0.1125 V,2: Trip-Level Voltage is 0.1250 V,3: Trip-Level Voltage is 0.0875 V,?..." group.long 0x24++0x03 line.long 0x00 "RX_SET,USB PHY Receiver Control Register" bitfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0,1" newline bitfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0,1,2,3,4,5,6,7" group.long 0x28++0x03 line.long 0x00 "RX_CLR,USB PHY Receiver Control Register" eventfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0,1" newline eventfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0,1,2,3,4,5,6,7" group.long 0x2C++0x03 line.long 0x00 "RX_TOG,USB PHY Receiver Control Register" bitfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0,1" newline bitfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0,1,2,3,4,5,6,7" group.long 0x30++0x03 line.long 0x00 "CTRL,USB PHY General Control Register" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline bitfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline rbitfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline bitfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline bitfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline bitfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline bitfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline bitfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline bitfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline bitfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline bitfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline bitfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline bitfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline bitfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline bitfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline bitfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline bitfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline bitfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline bitfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline bitfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline bitfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline bitfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline bitfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0: Disables 200kohm pullup resistors on DP and..,1: Enables 200kohm pullup resistors on DP and DN.." newline bitfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline bitfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline bitfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline bitfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x34++0x03 line.long 0x00 "CTRL_SET,USB PHY General Control Register" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline bitfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline rbitfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline bitfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline bitfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline bitfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline bitfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline bitfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline bitfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline bitfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline bitfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline bitfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline bitfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline bitfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline bitfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline bitfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline bitfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline bitfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline bitfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline bitfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline bitfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline bitfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline bitfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0,1" newline bitfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline bitfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline bitfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline bitfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x38++0x03 line.long 0x00 "CTRL_CLR,USB PHY General Control Register" eventfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline eventfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline eventfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline eventfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline eventfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline eventfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline eventfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline eventfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline eventfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline eventfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline eventfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline eventfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline eventfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline eventfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline eventfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline eventfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline eventfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline eventfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline eventfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline eventfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline eventfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline eventfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline eventfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline eventfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline eventfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0,1" newline eventfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline eventfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline eventfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline eventfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x3C++0x03 line.long 0x00 "CTRL_TOG,USB PHY General Control Register" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline bitfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline rbitfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline bitfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline bitfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline bitfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline bitfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline bitfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline bitfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline bitfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline bitfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline bitfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline bitfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline bitfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline bitfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline bitfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline bitfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline bitfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline bitfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline bitfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline bitfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline bitfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline bitfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0,1" newline bitfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline bitfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline bitfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline bitfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x40++0x03 line.long 0x00 "STATUS,USB PHY Status Register" rbitfld.long 0x00 10. "RESUME_STATUS,RESUME_STATUS" "0,1" newline bitfld.long 0x00 8. "OTGID_STATUS,OTGID_STATUS" "0,1" newline rbitfld.long 0x00 6. "DEVPLUGIN_STATUS,Status indicator for non-standard resistive plugged-in detection" "0: No attachment to a USB host is detected,1: Cable attachment to a USB host is detected" newline rbitfld.long 0x00 3. "HOSTDISCONDETECT_STATUS,HOSTDISCONDETECT_STATUS" "0: USB cable disconnect has not been detected at..,1: USB cable disconnect has been detected at the.." group.long 0x50++0x03 line.long 0x00 "DEBUG,USB PHY Debug Register" bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline bitfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline bitfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline bitfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline bitfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline bitfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" group.long 0x54++0x03 line.long 0x00 "DEBUG_SET,USB PHY Debug Register" bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline bitfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline bitfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline bitfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline bitfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline bitfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" group.long 0x58++0x03 line.long 0x00 "DEBUG_CLR,USB PHY Debug Register" eventfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline eventfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline eventfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline eventfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline eventfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline eventfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline eventfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline eventfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" group.long 0x5C++0x03 line.long 0x00 "DEBUG_TOG,USB PHY Debug Register" bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline bitfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline bitfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline bitfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline bitfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline bitfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" rgroup.long 0x60++0x03 line.long 0x00 "DEBUG0_STATUS,UTMI Debug Status Register 0" bitfld.long 0x00 26.--31. "SQUELCH_COUNT,SQUELCH_COUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 16.--25. 1. "UTMI_RXERROR_FAIL_COUNT,UTMI_RXERROR_FAIL_COUNT" newline hexmask.long.word 0x00 0.--15. 1. "LOOP_BACK_FAIL_COUNT,LOOP_BACK_FAIL_COUNT" group.long 0x70++0x03 line.long 0x00 "DEBUG1,UTMI Debug Status Register 1" bitfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline bitfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline bitfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline bitfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline bitfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0: Delay is nominal,1: Delay is +20%,2: Delay is -20%,3: Delay is -40%" group.long 0x74++0x03 line.long 0x00 "DEBUG1_SET,UTMI Debug Status Register 1" bitfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline bitfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline bitfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline bitfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline bitfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0,1,2,3" group.long 0x78++0x03 line.long 0x00 "DEBUG1_CLR,UTMI Debug Status Register 1" eventfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline eventfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline eventfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline eventfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline eventfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0,1,2,3" group.long 0x7C++0x03 line.long 0x00 "DEBUG1_TOG,UTMI Debug Status Register 1" bitfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline bitfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline bitfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline bitfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline bitfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0,1,2,3" rgroup.long 0x80++0x03 line.long 0x00 "VERSION,UTMI RTL Version" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,MAJOR" newline hexmask.long.byte 0x00 16.--23. 1. "MINOR,MINOR" newline hexmask.long.word 0x00 0.--15. 1. "STEP,STEP" group.long 0xA0++0x03 line.long 0x00 "PLL_SIC,USB PHY PLL Control/Status Register" rbitfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0: PLL is not currently locked,1: PLL is currently locked" newline bitfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0: Divide by 13,1: Divide by 15,2: Divide by 16,3: Divide by 20,4: Divide by 22,5: Divide by 25,6: Divide by 30,7: Divide by 240" newline bitfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline bitfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline bitfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0: Selects PLL_POWER to control the reference bias,1: Selects REFBIAS_PWD to control the reference.." newline bitfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline bitfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline bitfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline bitfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline bitfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xA4++0x03 line.long 0x00 "PLL_SIC_SET,USB PHY PLL Control/Status Register" rbitfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0,1" newline bitfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline bitfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline bitfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0,1" newline bitfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline bitfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline bitfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline bitfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline bitfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xA8++0x03 line.long 0x00 "PLL_SIC_CLR,USB PHY PLL Control/Status Register" eventfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0,1" newline eventfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline eventfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline eventfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0,1" newline eventfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline eventfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline eventfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline eventfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline eventfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xAC++0x03 line.long 0x00 "PLL_SIC_TOG,USB PHY PLL Control/Status Register" rbitfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0,1" newline bitfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline bitfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline bitfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0,1" newline bitfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline bitfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline bitfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline bitfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline bitfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xC0++0x03 line.long 0x00 "USB1_VBUS_DETECT,USB PHY VBUS Detect Control Register" bitfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0: Disable resistive charger detection resistors..,1: Enable resistive charger detection resistors.." newline bitfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0: VBUS discharge resistor is disabled (Default),1: VBUS discharge resistor is enabled" newline bitfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0: Powers down the VBUS_VALID comparator,1: Enables the SESS_VALID comparator (default),2: Enables the 3Vdetect (default),?..." newline bitfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0: Use the VBUS_VALID comparator for VBUS_VALID..,1: Use the Session End comparator for VBUS_VALID.." newline bitfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline bitfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline bitfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0: Use the VBUS_VALID comparator results for..,1: Use the Session Valid comparator results for..,2: Use the Session Valid comparator results for..,?..." newline bitfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0: Use the VBUS_VALID comparator results for..,1: Use the VBUS_VALID_3V detector results for.." newline bitfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline bitfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline bitfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline bitfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline bitfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0: Use the results of the internal VBUS_VALID..,1: Use the override values for VBUS_VALID AVALID.." newline bitfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0: VOLT_4,1: VOLT_4P1,2: VOLT_4P2,3: VOLT_4P3,4: 4.4 V (Default),5: VOLT_4P5,6: VOLT_4P6,7: VOLT_4P7" group.long 0xC4++0x03 line.long 0x00 "USB1_VBUS_DETECT_SET,USB PHY VBUS Detect Control Register" bitfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0,1" newline bitfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0,1" newline bitfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0,1" newline bitfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline bitfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline bitfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1,2,3" newline bitfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1" newline bitfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline bitfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline bitfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline bitfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline bitfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0,1" newline bitfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0,1,2,3,4,5,6,7" group.long 0xC8++0x03 line.long 0x00 "USB1_VBUS_DETECT_CLR,USB PHY VBUS Detect Control Register" eventfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0,1" newline eventfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0,1" newline eventfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0,1" newline eventfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline eventfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline eventfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1,2,3" newline eventfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1" newline eventfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline eventfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline eventfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline eventfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline eventfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0,1" newline eventfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0,1,2,3,4,5,6,7" group.long 0xCC++0x03 line.long 0x00 "USB1_VBUS_DETECT_TOG,USB PHY VBUS Detect Control Register" bitfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0,1" newline bitfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0,1" newline bitfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0,1" newline bitfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline bitfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline bitfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1,2,3" newline bitfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1" newline bitfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline bitfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline bitfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline bitfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline bitfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0,1" newline bitfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0,1,2,3,4,5,6,7" rgroup.long 0xD0++0x03 line.long 0x00 "USB1_VBUS_DET_STAT,USB PHY VBUS Detector Status Register" bitfld.long 0x00 4. "VBUS_VALID_3V,VBUS_VALID_3V detector status" "0: VBUS voltage is below VBUS_VALID_3V threshold,1: VBUS voltage is above VBUS_VALID_3V threshold" newline bitfld.long 0x00 3. "VBUS_VALID,VBUS voltage status" "0: VBUS is below the comparator threshold,1: VBUS is above the comparator threshold" newline bitfld.long 0x00 2. "AVALID,A-Device Session Valid status" "0: The VBUS voltage is below the Session Valid..,1: The VBUS voltage is above the Session Valid.." newline bitfld.long 0x00 1. "BVALID,B-Device Session Valid status" "0: The VBUS voltage is below the Session Valid..,1: The VBUS voltage is above the Session Valid.." newline bitfld.long 0x00 0. "SESSEND,Session End indicator" "0: The VBUS voltage is above the Session Valid..,1: The VBUS voltage is below the Session Valid.." group.long 0xE0++0x03 line.long 0x00 "USB1_CHRG_DETECT,USB PHY Charger Detect Control Register" bitfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0: Use local bias powered from USB1_VBUS for..,1: Use bandgap bias powered from VREGIN0/VREGIN1.." newline bitfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" group.long 0xE4++0x03 line.long 0x00 "USB1_CHRG_DETECT_SET,USB PHY Charger Detect Control Register" bitfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0,1" newline bitfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" group.long 0xE8++0x03 line.long 0x00 "USB1_CHRG_DETECT_CLR,USB PHY Charger Detect Control Register" eventfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0,1" newline eventfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" group.long 0xEC++0x03 line.long 0x00 "USB1_CHRG_DETECT_TOG,USB PHY Charger Detect Control Register" bitfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0,1" newline bitfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" rgroup.long 0xF0++0x03 line.long 0x00 "USB1_CHRG_DET_STAT,USB PHY Charger Detect Status Register" bitfld.long 0x00 4. "SECDET_DCP,Battery Charging Secondary Detection phase output" "0: Charging Downstream Port (CDP) has been..,1: Downstream Charging Port (DCP) has been.." newline bitfld.long 0x00 3. "DP_STATE,DP_STATE" "0: DP pin voltage is < 0.8V,1: DP pin voltage is > 2.0V" newline bitfld.long 0x00 2. "DN_STATE,DN_STATE" "0: DN pin voltage is < 0.8V,1: DN pin voltage is > 2.0V" newline bitfld.long 0x00 1. "CHRG_DETECTED,Battery Charging Primary Detection phase output" "0: Standard Downstream Port (SDP) has been..,1: Charging Port has been detected" newline bitfld.long 0x00 0. "PLUG_CONTACT,Battery Charging Data Contact Detection phase output" "0: No USB cable attachment has been detected,1: A USB cable attachment between the device and.." group.long 0x100++0x03 line.long 0x00 "ANACTRL,USB PHY Analog Control Register" bitfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0: The 15kohm nominal pulldowns on the DP and DN..,1: The 15kohm nominal pulldowns on the DP and DN.." group.long 0x104++0x03 line.long 0x00 "ANACTRL_SET,USB PHY Analog Control Register" bitfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0,1" group.long 0x108++0x03 line.long 0x00 "ANACTRL_CLR,USB PHY Analog Control Register" eventfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0,1" group.long 0x10C++0x03 line.long 0x00 "ANACTRL_TOG,USB PHY Analog Control Register" bitfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0,1" group.long 0x110++0x03 line.long 0x00 "USB1_LOOPBACK,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline bitfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline rbitfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline rbitfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline bitfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline bitfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline bitfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline bitfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline bitfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline bitfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline bitfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x114++0x03 line.long 0x00 "USB1_LOOPBACK_SET,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline bitfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline rbitfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline rbitfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline bitfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline bitfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline bitfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline bitfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline bitfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline bitfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline bitfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x118++0x03 line.long 0x00 "USB1_LOOPBACK_CLR,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline eventfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline eventfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline eventfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline eventfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline eventfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline eventfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline eventfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline eventfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline eventfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline eventfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x11C++0x03 line.long 0x00 "USB1_LOOPBACK_TOG,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline bitfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline rbitfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline rbitfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline bitfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline bitfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline bitfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline bitfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline bitfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline bitfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline bitfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x120++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x124++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT_SET,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x128++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT_CLR,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x12C++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT_TOG,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x130++0x03 line.long 0x00 "TRIM_OVERRIDE_EN,USB PHY Trim Override Enable Register" rbitfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline rbitfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline rbitfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline bitfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline bitfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline bitfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline bitfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline bitfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline bitfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" group.long 0x134++0x03 line.long 0x00 "TRIM_OVERRIDE_EN_SET,USB PHY Trim Override Enable Register" rbitfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline rbitfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline rbitfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline bitfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline bitfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline bitfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline bitfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline bitfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline bitfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" group.long 0x138++0x03 line.long 0x00 "TRIM_OVERRIDE_EN_CLR,USB PHY Trim Override Enable Register" eventfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline eventfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline eventfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline eventfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline eventfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline eventfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline eventfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline eventfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline eventfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" group.long 0x13C++0x03 line.long 0x00 "TRIM_OVERRIDE_EN_TOG,USB PHY Trim Override Enable Register" rbitfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline rbitfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline rbitfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline bitfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline bitfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline bitfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline bitfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline bitfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline bitfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" tree.end tree "USB1_PHY" base ad:0x29930000 group.long 0x00++0x03 line.long 0x00 "PWD,USB PHY Power-Down Register" bitfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0: Normal operation,1: Power-down the entire USB PHY receiver block.." newline bitfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0: Normal operation,1: Power-down the USB high-speed differential.." newline bitfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0: Normal operation,1: Power-down the USB full-speed differential.." newline bitfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0: Normal operation,1: Power-down the USB high-speed receiver.." newline bitfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0: Normal operation,1: Power-down the USB PHY transmit V-to-I.." newline bitfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0: Normal operation,1: Power-down the USB PHY current bias block for.." newline bitfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0: Normal operation,1: Power-down the USB full-speed drivers" group.long 0x04++0x03 line.long 0x00 "PWD_SET,USB PHY Power-Down Register" bitfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0,1" newline bitfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0,1" newline bitfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0,1" newline bitfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0,1" newline bitfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0,1" newline bitfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0,1" newline bitfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0,1" group.long 0x08++0x03 line.long 0x00 "PWD_CLR,USB PHY Power-Down Register" eventfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0,1" newline eventfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0,1" newline eventfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0,1" newline eventfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0,1" newline eventfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0,1" newline eventfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0,1" newline eventfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0,1" group.long 0x0C++0x03 line.long 0x00 "PWD_TOG,USB PHY Power-Down Register" bitfld.long 0x00 20. "RXPWDRX,RXPWDRX" "0,1" newline bitfld.long 0x00 19. "RXPWDDIFF,RXPWDDIFF" "0,1" newline bitfld.long 0x00 18. "RXPWD1PT1,RXPWD1PT1" "0,1" newline bitfld.long 0x00 17. "RXPWDENV,RXPWDENV" "0,1" newline bitfld.long 0x00 12. "TXPWDV2I,TXPWDV2I" "0,1" newline bitfld.long 0x00 11. "TXPWDIBIAS,TXPWDIBIAS" "0,1" newline bitfld.long 0x00 10. "TXPWDFS,TXPWDFS" "0,1" group.long 0x10++0x03 line.long 0x00 "TX,USB PHY Transmitter Control Register" bitfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "D_CAL,D_CAL" "0: Maximum current approximately 19% above nominal,?,?,?,?,?,?,7: NOMINAL,?,?,?,?,?,?,?,15: Minimum current approximately 19% below.." group.long 0x14++0x03 line.long 0x00 "TX_SET,USB PHY Transmitter Control Register" bitfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "D_CAL,D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x03 line.long 0x00 "TX_CLR,USB PHY Transmitter Control Register" eventfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "D_CAL,D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x03 line.long 0x00 "TX_TOG,USB PHY Transmitter Control Register" bitfld.long 0x00 16.--19. "TXCAL45DP,TXCAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "TXCAL45DN,TXCAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "D_CAL,D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x03 line.long 0x00 "RX,USB PHY Receiver Control Register" bitfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0: Normal operation,1: Use the output of the USB_DP single-ended.." newline bitfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0: Trip-Level Voltage is 0.56875 V,1: Trip-Level Voltage is 0.55000 V,2: Trip-Level Voltage is 0.58125 V,3: Trip-Level Voltage is 0.60000 V,?..." newline bitfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0: Trip-Level Voltage is 0.1000 V,1: Trip-Level Voltage is 0.1125 V,2: Trip-Level Voltage is 0.1250 V,3: Trip-Level Voltage is 0.0875 V,?..." group.long 0x24++0x03 line.long 0x00 "RX_SET,USB PHY Receiver Control Register" bitfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0,1" newline bitfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0,1,2,3,4,5,6,7" group.long 0x28++0x03 line.long 0x00 "RX_CLR,USB PHY Receiver Control Register" eventfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0,1" newline eventfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0,1,2,3,4,5,6,7" group.long 0x2C++0x03 line.long 0x00 "RX_TOG,USB PHY Receiver Control Register" bitfld.long 0x00 22. "RXDBYPASS,RXDBYPASS" "0,1" newline bitfld.long 0x00 4.--6. "DISCONADJ,DISCONADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ENVADJ,ENVADJ" "0,1,2,3,4,5,6,7" group.long 0x30++0x03 line.long 0x00 "CTRL,USB PHY General Control Register" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline bitfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline rbitfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline bitfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline bitfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline bitfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline bitfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline bitfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline bitfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline bitfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline bitfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline bitfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline bitfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline bitfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline bitfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline bitfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline bitfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline bitfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline bitfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline bitfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline bitfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline bitfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline bitfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0: Disables 200kohm pullup resistors on DP and..,1: Enables 200kohm pullup resistors on DP and DN.." newline bitfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline bitfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline bitfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline bitfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x34++0x03 line.long 0x00 "CTRL_SET,USB PHY General Control Register" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline bitfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline rbitfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline bitfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline bitfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline bitfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline bitfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline bitfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline bitfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline bitfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline bitfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline bitfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline bitfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline bitfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline bitfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline bitfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline bitfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline bitfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline bitfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline bitfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline bitfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline bitfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline bitfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0,1" newline bitfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline bitfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline bitfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline bitfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x38++0x03 line.long 0x00 "CTRL_CLR,USB PHY General Control Register" eventfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline eventfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline eventfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline eventfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline eventfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline eventfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline eventfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline eventfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline eventfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline eventfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline eventfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline eventfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline eventfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline eventfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline eventfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline eventfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline eventfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline eventfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline eventfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline eventfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline eventfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline eventfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline eventfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline eventfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline eventfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0,1" newline eventfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline eventfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline eventfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline eventfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x3C++0x03 line.long 0x00 "CTRL_TOG,USB PHY General Control Register" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "UTMI_SUSPENDM,UTMI_SUSPENDM" "0,1" newline bitfld.long 0x00 28. "HOST_FORCE_LS_SE0,HOST_FORCE_LS_SE0" "0,1" newline rbitfld.long 0x00 27. "OTG_ID_VALUE,OTG_ID_VALUE" "0,1" newline bitfld.long 0x00 24. "FSDLL_RST_EN,FSDLL_RST_EN" "0,1" newline bitfld.long 0x00 23. "ENVBUSCHG_WKUP,ENVBUSCHG_WKUP" "0,1" newline bitfld.long 0x00 22. "ENIDCHG_WKUP,ENIDCHG_WKUP" "0,1" newline bitfld.long 0x00 21. "ENDPDMCHG_WKUP,ENDPDMCHG_WKUP" "0,1" newline bitfld.long 0x00 20. "ENAUTOCLR_PHY_PWD,ENAUTOCLR_PHY_PWD" "0,1" newline bitfld.long 0x00 19. "ENAUTOCLR_CLKGATE,ENAUTOCLR_CLKGATE" "0,1" newline bitfld.long 0x00 18. "AUTORESUME_EN,AUTORESUME_EN" "0,1" newline bitfld.long 0x00 17. "WAKEUP_IRQ,WAKEUP_IRQ" "0,1" newline bitfld.long 0x00 16. "ENIRQWAKEUP,ENIRQWAKEUP" "0,1" newline bitfld.long 0x00 15. "ENUTMILEVEL3,ENUTMILEVEL3" "0,1" newline bitfld.long 0x00 14. "ENUTMILEVEL2,ENUTMILEVEL2" "0,1" newline bitfld.long 0x00 12. "DEVPLUGIN_IRQ,DEVPLUGIN_IRQ" "0,1" newline bitfld.long 0x00 11. "ENIRQDEVPLUGIN,ENIRQDEVPLUGIN" "0,1" newline bitfld.long 0x00 10. "RESUME_IRQ,RESUME_IRQ" "0,1" newline bitfld.long 0x00 9. "ENIRQRESUMEDETECT,ENIRQRESUMEDETECT" "0,1" newline bitfld.long 0x00 8. "RESUMEIRQSTICKY,RESUMEIRQSTICKY" "0,1" newline bitfld.long 0x00 7. "ENOTGIDDETECT,ENOTGIDDETECT" "0,1" newline bitfld.long 0x00 6. "OTG_ID_CHG_IRQ,OTG_ID_CHG_IRQ" "0,1" newline bitfld.long 0x00 5. "DEVPLUGIN_POLARITY,DEVPLUGIN_POLARITY" "0,1" newline bitfld.long 0x00 4. "ENDEVPLUGINDETECT,Enables non-standard resistive plugged-in detection" "0,1" newline bitfld.long 0x00 3. "HOSTDISCONDETECT_IRQ,HOSTDISCONDETECT_IRQ" "0,1" newline bitfld.long 0x00 2. "ENIRQHOSTDISCON,ENIRQHOSTDISCON" "0,1" newline bitfld.long 0x00 1. "ENHOSTDISCONDETECT,ENHOSTDISCONDETECT" "0,1" newline bitfld.long 0x00 0. "ENOTG_ID_CHG_IRQ,ENOTG_ID_CHG_IRQ" "0,1" group.long 0x40++0x03 line.long 0x00 "STATUS,USB PHY Status Register" rbitfld.long 0x00 10. "RESUME_STATUS,RESUME_STATUS" "0,1" newline bitfld.long 0x00 8. "OTGID_STATUS,OTGID_STATUS" "0,1" newline rbitfld.long 0x00 6. "DEVPLUGIN_STATUS,Status indicator for non-standard resistive plugged-in detection" "0: No attachment to a USB host is detected,1: Cable attachment to a USB host is detected" newline rbitfld.long 0x00 3. "HOSTDISCONDETECT_STATUS,HOSTDISCONDETECT_STATUS" "0: USB cable disconnect has not been detected at..,1: USB cable disconnect has been detected at the.." group.long 0x50++0x03 line.long 0x00 "DEBUG,USB PHY Debug Register" bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline bitfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline bitfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline bitfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline bitfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline bitfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" group.long 0x54++0x03 line.long 0x00 "DEBUG_SET,USB PHY Debug Register" bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline bitfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline bitfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline bitfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline bitfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline bitfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" group.long 0x58++0x03 line.long 0x00 "DEBUG_CLR,USB PHY Debug Register" eventfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline eventfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline eventfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline eventfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline eventfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline eventfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline eventfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline eventfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" group.long 0x5C++0x03 line.long 0x00 "DEBUG_TOG,USB PHY Debug Register" bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline bitfld.long 0x00 29. "HOST_RESUME_DEBUG,HOST_RESUME_DEBUG" "0,1" newline bitfld.long 0x00 25.--28. "SQUELCHRESETLENGTH,SQUELCHRESETLENGTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ENSQUELCHRESET,ENSQUELCHRESET" "0,1" newline bitfld.long 0x00 16.--20. "SQUELCHRESETCOUNT,SQUELCHRESETCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 12. "ENTX2RXCOUNT,ENTX2RXCOUNT" "0,1" newline bitfld.long 0x00 8.--11. "TX2RXCOUNT,TX2RXCOUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "ENHSTPULLDOWN,ENHSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 2.--3. "HSTPULLDOWN,HSTPULLDOWN" "0,1,2,3" newline bitfld.long 0x00 1. "DEBUG_INTERFACE_HOLD,DEBUG_INTERFACE_HOLD" "0,1" newline bitfld.long 0x00 0. "OTGIDPIOLOCK,OTGIDPIOLOCK" "0,1" rgroup.long 0x60++0x03 line.long 0x00 "DEBUG0_STATUS,UTMI Debug Status Register 0" bitfld.long 0x00 26.--31. "SQUELCH_COUNT,SQUELCH_COUNT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 16.--25. 1. "UTMI_RXERROR_FAIL_COUNT,UTMI_RXERROR_FAIL_COUNT" newline hexmask.long.word 0x00 0.--15. 1. "LOOP_BACK_FAIL_COUNT,LOOP_BACK_FAIL_COUNT" group.long 0x70++0x03 line.long 0x00 "DEBUG1,UTMI Debug Status Register 1" bitfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline bitfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline bitfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline bitfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline bitfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0: Delay is nominal,1: Delay is +20%,2: Delay is -20%,3: Delay is -40%" group.long 0x74++0x03 line.long 0x00 "DEBUG1_SET,UTMI Debug Status Register 1" bitfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline bitfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline bitfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline bitfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline bitfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0,1,2,3" group.long 0x78++0x03 line.long 0x00 "DEBUG1_CLR,UTMI Debug Status Register 1" eventfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline eventfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline eventfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline eventfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline eventfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0,1,2,3" group.long 0x7C++0x03 line.long 0x00 "DEBUG1_TOG,UTMI Debug Status Register 1" bitfld.long 0x00 21.--22. "USB2_REFBIAS_TST,Bias current control for usb2_phy" "0,1,2,3" newline bitfld.long 0x00 18.--20. "USB2_REFBIAS_VBGADJ,Adjustment bits on bandgap" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17. "USB2_REFBIAS_LOWPWR,to be added" "0,1" newline bitfld.long 0x00 16. "USB2_REFBIAS_PWDVBGUP,Powers down the bandgap detect logic will affect vbgup on misc1 register" "0,1" newline bitfld.long 0x00 15. "USB2_REFBIAS_SELFBIASOFF,Set to 1 to disable self bias 100 us after power up refbias(usb2_refbias_pwd).This can reduce noise on power" "0,1" newline bitfld.long 0x00 13.--14. "ENTAILADJVD,ENTAILADJVD" "0,1,2,3" rgroup.long 0x80++0x03 line.long 0x00 "VERSION,UTMI RTL Version" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,MAJOR" newline hexmask.long.byte 0x00 16.--23. 1. "MINOR,MINOR" newline hexmask.long.word 0x00 0.--15. 1. "STEP,STEP" group.long 0xA0++0x03 line.long 0x00 "PLL_SIC,USB PHY PLL Control/Status Register" rbitfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0: PLL is not currently locked,1: PLL is currently locked" newline bitfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0: Divide by 13,1: Divide by 15,2: Divide by 16,3: Divide by 20,4: Divide by 22,5: Divide by 25,6: Divide by 30,7: Divide by 240" newline bitfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline bitfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline bitfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0: Selects PLL_POWER to control the reference bias,1: Selects REFBIAS_PWD to control the reference.." newline bitfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline bitfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline bitfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline bitfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline bitfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xA4++0x03 line.long 0x00 "PLL_SIC_SET,USB PHY PLL Control/Status Register" rbitfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0,1" newline bitfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline bitfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline bitfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0,1" newline bitfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline bitfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline bitfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline bitfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline bitfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xA8++0x03 line.long 0x00 "PLL_SIC_CLR,USB PHY PLL Control/Status Register" eventfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0,1" newline eventfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline eventfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline eventfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0,1" newline eventfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline eventfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline eventfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline eventfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline eventfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xAC++0x03 line.long 0x00 "PLL_SIC_TOG,USB PHY PLL Control/Status Register" rbitfld.long 0x00 31. "PLL_LOCK,PLL_LOCK" "0,1" newline bitfld.long 0x00 22.--24. "PLL_DIV_SEL,PLL_DIV_SEL" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 21. "PLL_REG_ENABLE,PLL_REG_ENABLE" "0,1" newline bitfld.long 0x00 20. "REFBIAS_PWD,Power down the reference bias" "0,1" newline bitfld.long 0x00 19. "REFBIAS_PWD_SEL,REFBIAS_PWD_SEL" "0,1" newline bitfld.long 0x00 16. "PLL_BYPASS,PLL_BYPASS" "0,1" newline bitfld.long 0x00 13. "PLL_ENABLE,PLL_ENABLE" "0,1" newline bitfld.long 0x00 12. "PLL_POWER,PLL_POWER" "0,1" newline bitfld.long 0x00 6. "PLL_EN_USB_CLKS,PLL_EN_USB_CLKS" "0,1" newline bitfld.long 0x00 2.--4. "PLL_POSTDIV,PLL_POSTDIV" "0,1,2,3,4,5,6,7" group.long 0xC0++0x03 line.long 0x00 "USB1_VBUS_DETECT,USB PHY VBUS Detect Control Register" bitfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0: Disable resistive charger detection resistors..,1: Enable resistive charger detection resistors.." newline bitfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0: VBUS discharge resistor is disabled (Default),1: VBUS discharge resistor is enabled" newline bitfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0: Powers down the VBUS_VALID comparator,1: Enables the SESS_VALID comparator (default),2: Enables the 3Vdetect (default),?..." newline bitfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0: Use the VBUS_VALID comparator for VBUS_VALID..,1: Use the Session End comparator for VBUS_VALID.." newline bitfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline bitfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline bitfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0: Use the VBUS_VALID comparator results for..,1: Use the Session Valid comparator results for..,2: Use the Session Valid comparator results for..,?..." newline bitfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0: Use the VBUS_VALID comparator results for..,1: Use the VBUS_VALID_3V detector results for.." newline bitfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline bitfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline bitfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline bitfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline bitfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0: Use the results of the internal VBUS_VALID..,1: Use the override values for VBUS_VALID AVALID.." newline bitfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0: VOLT_4,1: VOLT_4P1,2: VOLT_4P2,3: VOLT_4P3,4: 4.4 V (Default),5: VOLT_4P5,6: VOLT_4P6,7: VOLT_4P7" group.long 0xC4++0x03 line.long 0x00 "USB1_VBUS_DETECT_SET,USB PHY VBUS Detect Control Register" bitfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0,1" newline bitfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0,1" newline bitfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0,1" newline bitfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline bitfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline bitfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1,2,3" newline bitfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1" newline bitfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline bitfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline bitfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline bitfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline bitfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0,1" newline bitfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0,1,2,3,4,5,6,7" group.long 0xC8++0x03 line.long 0x00 "USB1_VBUS_DETECT_CLR,USB PHY VBUS Detect Control Register" eventfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0,1" newline eventfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0,1" newline eventfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0,1" newline eventfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline eventfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline eventfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1,2,3" newline eventfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1" newline eventfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline eventfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline eventfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline eventfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline eventfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0,1" newline eventfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0,1,2,3,4,5,6,7" group.long 0xCC++0x03 line.long 0x00 "USB1_VBUS_DETECT_TOG,USB PHY VBUS Detect Control Register" bitfld.long 0x00 31. "EN_CHARGER_RESISTOR,Enables resistors used for an older method of resistive battery charger detection" "0,1" newline bitfld.long 0x00 26. "DISCHARGE_VBUS,Controls VBUS discharge resistor" "0,1" newline bitfld.long 0x00 20.--22. "PWRUP_CMPS,Enables the VBUS_VALID comparator" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18. "VBUSVALID_TO_SESSVALID,Selects the comparator used for VBUS_VALID" "0,1" newline bitfld.long 0x00 12. "ID_OVERRIDE,TBA" "0,1" newline bitfld.long 0x00 11. "ID_OVERRIDE_EN,TBA" "0,1" newline bitfld.long 0x00 9.--10. "VBUS_SOURCE_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1,2,3" newline bitfld.long 0x00 8. "VBUSVALID_SEL,Selects the source of the VBUS_VALID signal reported to the USB controller" "0,1" newline bitfld.long 0x00 7. "VBUSVALID_OVERRIDE,Override value for VBUS_VALID signal sent to USB controller" "0,1" newline bitfld.long 0x00 6. "AVALID_OVERRIDE,Override value for A-Device Session Valid" "0,1" newline bitfld.long 0x00 5. "BVALID_OVERRIDE,Override value for B-Device Session Valid" "0,1" newline bitfld.long 0x00 4. "SESSEND_OVERRIDE,Override value for SESSEND" "0,1" newline bitfld.long 0x00 3. "VBUS_OVERRIDE_EN,VBUS detect signal override enable" "0,1" newline bitfld.long 0x00 0.--2. "VBUSVALID_THRESH,VBUSVALID_THRESH" "0,1,2,3,4,5,6,7" rgroup.long 0xD0++0x03 line.long 0x00 "USB1_VBUS_DET_STAT,USB PHY VBUS Detector Status Register" bitfld.long 0x00 4. "VBUS_VALID_3V,VBUS_VALID_3V detector status" "0: VBUS voltage is below VBUS_VALID_3V threshold,1: VBUS voltage is above VBUS_VALID_3V threshold" newline bitfld.long 0x00 3. "VBUS_VALID,VBUS voltage status" "0: VBUS is below the comparator threshold,1: VBUS is above the comparator threshold" newline bitfld.long 0x00 2. "AVALID,A-Device Session Valid status" "0: The VBUS voltage is below the Session Valid..,1: The VBUS voltage is above the Session Valid.." newline bitfld.long 0x00 1. "BVALID,B-Device Session Valid status" "0: The VBUS voltage is below the Session Valid..,1: The VBUS voltage is above the Session Valid.." newline bitfld.long 0x00 0. "SESSEND,Session End indicator" "0: The VBUS voltage is above the Session Valid..,1: The VBUS voltage is below the Session Valid.." group.long 0xE0++0x03 line.long 0x00 "USB1_CHRG_DETECT,USB PHY Charger Detect Control Register" bitfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0: Use local bias powered from USB1_VBUS for..,1: Use bandgap bias powered from VREGIN0/VREGIN1.." newline bitfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" group.long 0xE4++0x03 line.long 0x00 "USB1_CHRG_DETECT_SET,USB PHY Charger Detect Control Register" bitfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0,1" newline bitfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" group.long 0xE8++0x03 line.long 0x00 "USB1_CHRG_DETECT_CLR,USB PHY Charger Detect Control Register" eventfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0,1" newline eventfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" group.long 0xEC++0x03 line.long 0x00 "USB1_CHRG_DETECT_TOG,USB PHY Charger Detect Control Register" bitfld.long 0x00 23. "BGR_BIAS,BGR_BIAS" "0,1" newline bitfld.long 0x00 2. "PULLUP_DP,PULLUP_DP" "0,1" rgroup.long 0xF0++0x03 line.long 0x00 "USB1_CHRG_DET_STAT,USB PHY Charger Detect Status Register" bitfld.long 0x00 4. "SECDET_DCP,Battery Charging Secondary Detection phase output" "0: Charging Downstream Port (CDP) has been..,1: Downstream Charging Port (DCP) has been.." newline bitfld.long 0x00 3. "DP_STATE,DP_STATE" "0: DP pin voltage is < 0.8V,1: DP pin voltage is > 2.0V" newline bitfld.long 0x00 2. "DN_STATE,DN_STATE" "0: DN pin voltage is < 0.8V,1: DN pin voltage is > 2.0V" newline bitfld.long 0x00 1. "CHRG_DETECTED,Battery Charging Primary Detection phase output" "0: Standard Downstream Port (SDP) has been..,1: Charging Port has been detected" newline bitfld.long 0x00 0. "PLUG_CONTACT,Battery Charging Data Contact Detection phase output" "0: No USB cable attachment has been detected,1: A USB cable attachment between the device and.." group.long 0x100++0x03 line.long 0x00 "ANACTRL,USB PHY Analog Control Register" bitfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0: The 15kohm nominal pulldowns on the DP and DN..,1: The 15kohm nominal pulldowns on the DP and DN.." group.long 0x104++0x03 line.long 0x00 "ANACTRL_SET,USB PHY Analog Control Register" bitfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0,1" group.long 0x108++0x03 line.long 0x00 "ANACTRL_CLR,USB PHY Analog Control Register" eventfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0,1" group.long 0x10C++0x03 line.long 0x00 "ANACTRL_TOG,USB PHY Analog Control Register" bitfld.long 0x00 10. "DEV_PULLDOWN,DEV_PULLDOWN" "0,1" group.long 0x110++0x03 line.long 0x00 "USB1_LOOPBACK,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline bitfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline rbitfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline rbitfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline bitfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline bitfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline bitfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline bitfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline bitfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline bitfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline bitfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x114++0x03 line.long 0x00 "USB1_LOOPBACK_SET,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline bitfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline rbitfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline rbitfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline bitfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline bitfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline bitfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline bitfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline bitfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline bitfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline bitfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x118++0x03 line.long 0x00 "USB1_LOOPBACK_CLR,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline eventfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline eventfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline eventfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline eventfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline eventfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline eventfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline eventfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline eventfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline eventfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline eventfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x11C++0x03 line.long 0x00 "USB1_LOOPBACK_TOG,USB PHY Loopback Control/Status Register" hexmask.long.byte 0x00 16.--23. 1. "TSTPKT,TSTPKT" newline bitfld.long 0x00 15. "TSTI_HSFS_MODE_EN,TSTI_HSFS_MODE_EN" "0,1" newline rbitfld.long 0x00 8. "UTMO_DIG_TST1,UTMO_DIG_TST1" "0,1" newline rbitfld.long 0x00 7. "UTMO_DIG_TST0,UTMO_DIG_TST0" "0,1" newline bitfld.long 0x00 6. "TSTI_TX_HIZ,TSTI_TX_HIZ" "0,1" newline bitfld.long 0x00 5. "TSTI_TX_EN,TSTI_TX_EN" "0,1" newline bitfld.long 0x00 4. "TSTI_TX_LS_MODE,TSTI_TX_LS_MODE" "0,1" newline bitfld.long 0x00 3. "TSTI_TX_HS_MODE,TSTI_TX_HS_MODE" "0,1" newline bitfld.long 0x00 2. "UTMI_DIG_TST1,UTMI_DIG_TST1" "0,1" newline bitfld.long 0x00 1. "UTMI_DIG_TST0,UTMI_DIG_TST0" "0,1" newline bitfld.long 0x00 0. "UTMI_TESTSTART,UTMI_TESTSTART" "0,1" group.long 0x120++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x124++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT_SET,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x128++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT_CLR,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x12C++0x03 line.long 0x00 "USB1_LOOPBACK_HSFSCNT_TOG,USB PHY Loopback Packet Number Select Register" hexmask.long.word 0x00 16.--31. 1. "TSTI_FS_NUMBER,TSTI_FS_NUMBER" newline hexmask.long.word 0x00 0.--15. 1. "TSTI_HS_NUMBER,TSTI_HS_NUMBER" group.long 0x130++0x03 line.long 0x00 "TRIM_OVERRIDE_EN,USB PHY Trim Override Enable Register" rbitfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline rbitfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline rbitfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline bitfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline bitfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline bitfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline bitfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline bitfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline bitfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" group.long 0x134++0x03 line.long 0x00 "TRIM_OVERRIDE_EN_SET,USB PHY Trim Override Enable Register" rbitfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline rbitfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline rbitfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline bitfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline bitfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline bitfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline bitfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline bitfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline bitfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" group.long 0x138++0x03 line.long 0x00 "TRIM_OVERRIDE_EN_CLR,USB PHY Trim Override Enable Register" eventfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline eventfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline eventfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline eventfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline eventfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline eventfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline eventfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline eventfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline eventfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" group.long 0x13C++0x03 line.long 0x00 "TRIM_OVERRIDE_EN_TOG,USB PHY Trim Override Enable Register" rbitfld.long 0x00 28.--31. "TRIM_USBPHY_TX_CAL45DN,TRIM_USBPHY_TX_CAL45DN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 24.--27. "TRIM_USBPHY_TX_CAL45DP,TRIM_USBPHY_TX_CAL45DP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 20.--23. "TRIM_USBPHY_TX_D_CAL,TRIM_USBPHY_TX_D_CAL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 18.--19. "TRIM_USB_REG_ENV_TAIL_ADJ_VD,TRIM_USB_REG_ENV_TAIL_ADJ_VD" "0,1,2,3" newline rbitfld.long 0x00 15.--17. "TRIM_PLL_CTRL0_DIV_SEL,TRIM_PLL_CTRL0_DIV_SEL" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 13.--14. "TRIM_USB2_REFBIAS_TST,TRIM_USB2_REFBIAS_TST" "0,1,2,3" newline rbitfld.long 0x00 10.--12. "TRIM_USB2_REFBIAS_VBGADJ,TRIM_USB2_REFBIAS_VBGADJ" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. "TRIM_REFBIAS_TST_OVERRIDE,Override enable for bias current control" "0,1" newline bitfld.long 0x00 5. "TRIM_REFBIAS_VBGADJ_OVERRIDE,Override enable for bandgap adjustment" "0,1" newline bitfld.long 0x00 4. "TRIM_TX_CAL45DN_OVERRIDE,TRIM_TX_CAL45DN_OVERRIDE" "0,1" newline bitfld.long 0x00 3. "TRIM_TX_CAL45DP_OVERRIDE,TRIM_TX_CAL45DP_OVERRIDE" "0,1" newline bitfld.long 0x00 2. "TRIM_TX_D_CAL_OVERRIDE,TRIM_TX_D_CAL_OVERRIDE" "0,1" newline bitfld.long 0x00 1. "TRIM_ENV_TAIL_ADJ_VD_OVERRIDE,TRIM_ENV_TAIL_ADJ_VD_OVERRIDE" "0,1" newline bitfld.long 0x00 0. "TRIM_DIV_SEL_OVERRIDE,TRIM_DIV_SEL_OVERRIDE" "0,1" tree.end tree.end tree "POWERQ (PowerQuad)" base ad:0x28400000 group.long 0x00++0x03 line.long 0x00 "OUTBASE,Output Base" hexmask.long 0x00 0.--31. 1. "OUTBASE,Base address register for the output region" group.long 0x04++0x03 line.long 0x00 "OUTFORMAT,Output Format" hexmask.long.byte 0x00 8.--15. 1. "OUT_SCALER,Output Scaler Value" bitfld.long 0x00 4.--5. "OUT_FORMATEXT,Output External Format" "0,1,2,3" newline bitfld.long 0x00 0.--1. "OUT_FORMATINT,Output Internal Format" "0,1,2,3" group.long 0x08++0x03 line.long 0x00 "TMPBASE,Temporary Base" hexmask.long 0x00 0.--31. 1. "TMPBASE,Base address register for the temporary region" group.long 0x0C++0x03 line.long 0x00 "TMPFORMAT,Temporary Format" hexmask.long.byte 0x00 8.--15. 1. "TMP_SCALER,Temporary Scaler Value" bitfld.long 0x00 4.--5. "TMP_FORMATEXT,Temporary External Format" "0,1,2,3" newline bitfld.long 0x00 0.--1. "TMP_FORMATINT,Temporary Internal Format" "0,1,2,3" group.long 0x10++0x03 line.long 0x00 "INABASE,Input A Base" hexmask.long 0x00 0.--31. 1. "INABASE,Input A Base" group.long 0x14++0x03 line.long 0x00 "INAFORMAT,Input A Format" hexmask.long.byte 0x00 8.--15. 1. "INA_SCALER,Input A Scaler Value" bitfld.long 0x00 4.--5. "INA_FORMATEXT,Input A External Format" "0,1,2,3" newline bitfld.long 0x00 0.--1. "INA_FORMATINT,Input A Internal Format" "0,1,2,3" group.long 0x18++0x03 line.long 0x00 "INBBASE,Input B Base" hexmask.long 0x00 0.--31. 1. "INBBASE,Input B Base" group.long 0x1C++0x03 line.long 0x00 "INBFORMAT,Input B Format" hexmask.long.byte 0x00 8.--15. 1. "INB_SCALER,Input B Scaler Value" bitfld.long 0x00 4.--5. "INB_FORMATEXT,Input B External Format" "0,1,2,3" newline bitfld.long 0x00 0.--1. "INB_FORMATINT,Input B Internal Format" "0,1,2,3" group.long 0x100++0x03 line.long 0x00 "CONTROL,Control" rbitfld.long 0x00 31. "INST_BUSY,Instruction Busy" "0,1" bitfld.long 0x00 4.--7. "DECODE_MACHINE,Decode Machine" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DECODE_OPCODE,Decode Opcode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x104++0x03 line.long 0x00 "LENGTH,Length" hexmask.long 0x00 0.--31. 1. "INST_LENGTH,Instruction Length" group.long 0x108++0x03 line.long 0x00 "CPPRE,Coprocessor Pre-scale" bitfld.long 0x00 17. "CPPRE_SAT8,Saturation 8" "0: SAT_8_BITS,1: SAT_16_BITS" bitfld.long 0x00 16. "CPPRE_SAT,Saturation" "0: No saturation,1: Forces sub-32 bit saturation" newline hexmask.long.byte 0x00 8.--15. 1. "CPPRE_OUT,Output" hexmask.long.byte 0x00 0.--7. 1. "CPPRE_IN,Input" group.long 0x10C++0x03 line.long 0x00 "MISC,Miscellaneous" hexmask.long 0x00 0.--31. 1. "INST_MISC,For Matrix : Used for scaling factor" group.long 0x110++0x03 line.long 0x00 "CURSORY,Cursory" bitfld.long 0x00 0. "CURSORY,Cursory Mode" "0: Disable Cursory mode,1: Enable Cursory Mode" group.long 0x180++0x03 line.long 0x00 "CORDIC_X,Cordic input X" hexmask.long 0x00 0.--31. 1. "CORDIC_X,Cordic Input x" group.long 0x184++0x03 line.long 0x00 "CORDIC_Y,Cordic Input Y" hexmask.long 0x00 0.--31. 1. "CORDIC_Y,Cordic Input y" group.long 0x188++0x03 line.long 0x00 "CORDIC_Z,Cordic Input Z" hexmask.long 0x00 0.--31. 1. "CORDIC_Z,Cordic Input z" group.long 0x18C++0x03 line.long 0x00 "ERRSTAT,Error Status" bitfld.long 0x00 4. "BUSERROR,Bus Error" "0: NO_ERROR,1: Error on Bus" bitfld.long 0x00 3. "UNDERFLOW,Underflow" "0: NO_ERROR,1: Error on Underflow" newline bitfld.long 0x00 2. "FIXEDOVERFLOW,Fixed Point Overflow" "0: NO_ERROR,1: Error on Fixed Point Overflow" bitfld.long 0x00 1. "NAN,Floating Point NaN" "0: NO_ERROR,1: Error on Floating Point NaN" newline bitfld.long 0x00 0. "OVERFLOW,Floating Point Overflow" "0: NO_ERROR,1: Error on Floating Point Overflow" group.long 0x190++0x03 line.long 0x00 "INTREN,Interrupt Enable" bitfld.long 0x00 7. "INTR_COMP,Interrupt on Instruction Completion" "0: DISABLE,1: Enable interrupt on instruction completion" bitfld.long 0x00 4. "INTR_BERR,Interrupt on AHBM Bus Error" "0: DISABLE,1: Enable interrupt on AHBM Bus Error" newline bitfld.long 0x00 3. "INTR_UFLOW,Interrupt on Subnormal Truncation" "0: DISABLE,1: Enable interrupt on subnormal truncation" bitfld.long 0x00 2. "INTR_FIXED,Interrupt on Fixed Point Overflow" "0: DISABLE,1: Enable interrupt on fixed point overflow" newline bitfld.long 0x00 1. "INTR_NAN,Interrupt Floating Point NaN" "0: DISABLE,1: Enable interrupt on floating point NaN" bitfld.long 0x00 0. "INTR_OFLOW,Interrupt Floating Point Overflow" "0: DISABLE,1: Enable interrupt on floating point overflow" group.long 0x194++0x03 line.long 0x00 "EVENTEN,Event Enable" bitfld.long 0x00 7. "EVENT_COMP,Event Trigger on Instruction Completion" "0: DISABLE,1: Enable event trigger on instruction completion" bitfld.long 0x00 4. "EVENT_BERR,Event Trigger on AHBM Bus Error" "0: DISABLE,1: Enable event trigger on AHBM bus error" newline bitfld.long 0x00 3. "EVENT_UFLOW,Event Trigger on Subnormal Truncation" "0: DISABLE,1: Enable event trigger on subnormal truncation" bitfld.long 0x00 2. "EVENT_FIXED,Event Trigger on Fixed Point Overflow" "0: DISABLE,1: Enable event trigger on fixed point overflow" newline bitfld.long 0x00 1. "EVENT_NAN,Event Trigger on Floating Point NaN" "0: DISABLE,1: Enable event trigger on floating point NaN" bitfld.long 0x00 0. "EVENT_OFLOW,Event Trigger on Floating Point Overflow" "0: DISABLE,1: Enable event trigger on Floating point overflow" group.long 0x198++0x03 line.long 0x00 "INTRSTAT,Interrupt Status" bitfld.long 0x00 0. "INTR_STAT,Interrupt Status" "0: No new interrupt,1: Interrupt captured" repeat 16. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "GPREG[$1],General Purpose Register Bank n $1" hexmask.long 0x00 0.--31. 1. "GPREG,General Purpose Register Bank" repeat.end repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x240)++0x03 line.long 0x00 "COMPREG[$1],Compute Register Bank n $1" hexmask.long 0x00 0.--31. 1. "COMPREG,Compute Register Bank" repeat.end tree.end tree "PXP" base ad:0x2DB40000 group.long 0x00++0x03 line.long 0x00 "HW_PXP_CTRL,Control Register 0" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "RSVD4,RSVD4" "0,1" newline rbitfld.long 0x00 28. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline bitfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline bitfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline bitfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline bitfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0: BLK_SIZE_8X8,1: BLK_SIZE_16X16" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline bitfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline bitfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline bitfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline bitfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline bitfld.long 0x00 16. "ENABLE_PS_AS_OUT,ENABLE_PS_AS_OUT" "0,1" newline bitfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline bitfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline bitfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0: ROT_0,1: ROT_90,2: ROT_180,3: ROT_270" newline bitfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline bitfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline bitfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0: ROT_0,1: ROT_90,2: ROT_180,3: ROT_270" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 5. "HANDSHAKE_ABORT_SKIP,HANDSHAKE_ABORT_SKIP" "0,1" newline bitfld.long 0x00 4. "ENABLE_LCD0_HANDSHAKE,ENABLE_LCD0_HANDSHAKE" "0,1" newline bitfld.long 0x00 3. "LUT_DMA_IRQ_ENABLE,LUT_DMA_IRQ_ENABLE" "0,1" newline bitfld.long 0x00 2. "NEXT_IRQ_ENABLE,NEXT_IRQ_ENABLE" "0,1" newline bitfld.long 0x00 1. "IRQ_ENABLE,IRQ_ENABLE" "0,1" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x04++0x03 line.long 0x00 "HW_PXP_CTRL_SET,Control Register 0" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "RSVD4,RSVD4" "0,1" newline rbitfld.long 0x00 28. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline bitfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline bitfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline bitfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline bitfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0,1" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline bitfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline bitfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline bitfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline bitfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline bitfld.long 0x00 16. "ENABLE_PS_AS_OUT,ENABLE_PS_AS_OUT" "0,1" newline bitfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline bitfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline bitfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0,1,2,3" newline bitfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline bitfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline bitfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0,1,2,3" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 5. "HANDSHAKE_ABORT_SKIP,HANDSHAKE_ABORT_SKIP" "0,1" newline bitfld.long 0x00 4. "ENABLE_LCD0_HANDSHAKE,ENABLE_LCD0_HANDSHAKE" "0,1" newline bitfld.long 0x00 3. "LUT_DMA_IRQ_ENABLE,LUT_DMA_IRQ_ENABLE" "0,1" newline bitfld.long 0x00 2. "NEXT_IRQ_ENABLE,NEXT_IRQ_ENABLE" "0,1" newline bitfld.long 0x00 1. "IRQ_ENABLE,IRQ_ENABLE" "0,1" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x08++0x03 line.long 0x00 "HW_PXP_CTRL_CLR,Control Register 0" eventfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline eventfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline eventfld.long 0x00 29. "RSVD4,RSVD4" "0,1" newline eventfld.long 0x00 28. "RSVD2,RSVD2" "0,1" newline eventfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline eventfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline eventfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline eventfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline eventfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0,1" newline eventfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline eventfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline eventfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline eventfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline eventfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline eventfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline eventfld.long 0x00 16. "ENABLE_PS_AS_OUT,ENABLE_PS_AS_OUT" "0,1" newline eventfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline eventfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline eventfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0,1,2,3" newline eventfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline eventfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline eventfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0,1,2,3" newline eventfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline eventfld.long 0x00 5. "HANDSHAKE_ABORT_SKIP,HANDSHAKE_ABORT_SKIP" "0,1" newline eventfld.long 0x00 4. "ENABLE_LCD0_HANDSHAKE,ENABLE_LCD0_HANDSHAKE" "0,1" newline eventfld.long 0x00 3. "LUT_DMA_IRQ_ENABLE,LUT_DMA_IRQ_ENABLE" "0,1" newline eventfld.long 0x00 2. "NEXT_IRQ_ENABLE,NEXT_IRQ_ENABLE" "0,1" newline eventfld.long 0x00 1. "IRQ_ENABLE,IRQ_ENABLE" "0,1" newline eventfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x0C++0x03 line.long 0x00 "HW_PXP_CTRL_TOG,Control Register 0" bitfld.long 0x00 31. "SFTRST,SFTRST" "0,1" newline bitfld.long 0x00 30. "CLKGATE,CLKGATE" "0,1" newline rbitfld.long 0x00 29. "RSVD4,RSVD4" "0,1" newline rbitfld.long 0x00 28. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline bitfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline bitfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline bitfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline bitfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0,1" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline bitfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline bitfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline bitfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline bitfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline bitfld.long 0x00 16. "ENABLE_PS_AS_OUT,ENABLE_PS_AS_OUT" "0,1" newline bitfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline bitfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline bitfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0,1,2,3" newline bitfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline bitfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline bitfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0,1,2,3" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 5. "HANDSHAKE_ABORT_SKIP,HANDSHAKE_ABORT_SKIP" "0,1" newline bitfld.long 0x00 4. "ENABLE_LCD0_HANDSHAKE,ENABLE_LCD0_HANDSHAKE" "0,1" newline bitfld.long 0x00 3. "LUT_DMA_IRQ_ENABLE,LUT_DMA_IRQ_ENABLE" "0,1" newline bitfld.long 0x00 2. "NEXT_IRQ_ENABLE,NEXT_IRQ_ENABLE" "0,1" newline bitfld.long 0x00 1. "IRQ_ENABLE,IRQ_ENABLE" "0,1" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x10++0x03 line.long 0x00 "HW_PXP_STAT,Status Register" hexmask.long.byte 0x00 24.--31. 1. "BLOCKX,BLOCKX" newline hexmask.long.byte 0x00 16.--23. 1. "BLOCKY,BLOCKY" newline rbitfld.long 0x00 12.--15. "AXI_ERROR_ID_1,AXI_ERROR_ID_1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 11. "RSVD2,RSVD2" "0,1" newline eventfld.long 0x00 10. "AXI_READ_ERROR_1,AXI_READ_ERROR_1" "0,1" newline eventfld.long 0x00 9. "AXI_WRITE_ERROR_1,AXI_WRITE_ERROR_1" "0,1" newline eventfld.long 0x00 8. "LUT_DMA_LOAD_DONE_IRQ,LUT_DMA_LOAD_DONE_IRQ" "0,1" newline rbitfld.long 0x00 4.--7. "AXI_ERROR_ID_0,AXI_ERROR_ID_0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 3. "NEXT_IRQ,NEXT_IRQ" "0,1" newline eventfld.long 0x00 2. "AXI_READ_ERROR_0,AXI_READ_ERROR_0" "0,1" newline eventfld.long 0x00 1. "AXI_WRITE_ERROR_0,AXI_WRITE_ERROR_0" "0,1" newline eventfld.long 0x00 0. "IRQ0,IRQ0" "0,1" group.long 0x14++0x03 line.long 0x00 "HW_PXP_STAT_SET,Status Register" hexmask.long.byte 0x00 24.--31. 1. "BLOCKX,BLOCKX" newline hexmask.long.byte 0x00 16.--23. 1. "BLOCKY,BLOCKY" newline rbitfld.long 0x00 12.--15. "AXI_ERROR_ID_1,AXI_ERROR_ID_1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 11. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 10. "AXI_READ_ERROR_1,AXI_READ_ERROR_1" "0,1" newline bitfld.long 0x00 9. "AXI_WRITE_ERROR_1,AXI_WRITE_ERROR_1" "0,1" newline bitfld.long 0x00 8. "LUT_DMA_LOAD_DONE_IRQ,LUT_DMA_LOAD_DONE_IRQ" "0,1" newline rbitfld.long 0x00 4.--7. "AXI_ERROR_ID_0,AXI_ERROR_ID_0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "NEXT_IRQ,NEXT_IRQ" "0,1" newline bitfld.long 0x00 2. "AXI_READ_ERROR_0,AXI_READ_ERROR_0" "0,1" newline bitfld.long 0x00 1. "AXI_WRITE_ERROR_0,AXI_WRITE_ERROR_0" "0,1" newline bitfld.long 0x00 0. "IRQ0,IRQ0" "0,1" group.long 0x18++0x03 line.long 0x00 "HW_PXP_STAT_CLR,Status Register" hexmask.long.byte 0x00 24.--31. 1. "BLOCKX,BLOCKX" newline hexmask.long.byte 0x00 16.--23. 1. "BLOCKY,BLOCKY" newline eventfld.long 0x00 12.--15. "AXI_ERROR_ID_1,AXI_ERROR_ID_1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 11. "RSVD2,RSVD2" "0,1" newline eventfld.long 0x00 10. "AXI_READ_ERROR_1,AXI_READ_ERROR_1" "0,1" newline eventfld.long 0x00 9. "AXI_WRITE_ERROR_1,AXI_WRITE_ERROR_1" "0,1" newline eventfld.long 0x00 8. "LUT_DMA_LOAD_DONE_IRQ,LUT_DMA_LOAD_DONE_IRQ" "0,1" newline eventfld.long 0x00 4.--7. "AXI_ERROR_ID_0,AXI_ERROR_ID_0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 3. "NEXT_IRQ,NEXT_IRQ" "0,1" newline eventfld.long 0x00 2. "AXI_READ_ERROR_0,AXI_READ_ERROR_0" "0,1" newline eventfld.long 0x00 1. "AXI_WRITE_ERROR_0,AXI_WRITE_ERROR_0" "0,1" newline eventfld.long 0x00 0. "IRQ0,IRQ0" "0,1" group.long 0x1C++0x03 line.long 0x00 "HW_PXP_STAT_TOG,Status Register" hexmask.long.byte 0x00 24.--31. 1. "BLOCKX,BLOCKX" newline hexmask.long.byte 0x00 16.--23. 1. "BLOCKY,BLOCKY" newline rbitfld.long 0x00 12.--15. "AXI_ERROR_ID_1,AXI_ERROR_ID_1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 11. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 10. "AXI_READ_ERROR_1,AXI_READ_ERROR_1" "0,1" newline bitfld.long 0x00 9. "AXI_WRITE_ERROR_1,AXI_WRITE_ERROR_1" "0,1" newline bitfld.long 0x00 8. "LUT_DMA_LOAD_DONE_IRQ,LUT_DMA_LOAD_DONE_IRQ" "0,1" newline rbitfld.long 0x00 4.--7. "AXI_ERROR_ID_0,AXI_ERROR_ID_0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "NEXT_IRQ,NEXT_IRQ" "0,1" newline bitfld.long 0x00 2. "AXI_READ_ERROR_0,AXI_READ_ERROR_0" "0,1" newline bitfld.long 0x00 1. "AXI_WRITE_ERROR_0,AXI_WRITE_ERROR_0" "0,1" newline bitfld.long 0x00 0. "IRQ0,IRQ0" "0,1" group.long 0x20++0x03 line.long 0x00 "HW_PXP_OUT_CTRL,Output Buffer Control Register" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,ALPHA" newline bitfld.long 0x00 23. "ALPHA_OUTPUT,ALPHA_OUTPUT" "0,1" newline hexmask.long.word 0x00 10.--22. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 8.--9. "INTERLACED_OUTPUT,INTERLACED_OUTPUT" "0: PROGRESSIVE,1: FIELD0,2: FIELD1,3: INTERLACED" newline rbitfld.long 0x00 5.--7. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "FORMAT,FORMAT" "0: ARGB8888,?,?,?,4: RGB888,5: RGB888P,?,?,8: ARGB1555,9: ARGB4444,?,?,12: RGB555,13: RGB444,14: RGB565,?,16: YUV1P444,?,18: UYVY1P422,19: VYUY1P422,20: Y8,21: Y4,?,?,24: YUV2P422,25: YUV2P420,26: YVU2P422,27: YVU2P420,?..." group.long 0x24++0x03 line.long 0x00 "HW_PXP_OUT_CTRL_SET,Output Buffer Control Register" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,ALPHA" newline bitfld.long 0x00 23. "ALPHA_OUTPUT,ALPHA_OUTPUT" "0,1" newline hexmask.long.word 0x00 10.--22. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 8.--9. "INTERLACED_OUTPUT,INTERLACED_OUTPUT" "0,1,2,3" newline rbitfld.long 0x00 5.--7. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "FORMAT,FORMAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x28++0x03 line.long 0x00 "HW_PXP_OUT_CTRL_CLR,Output Buffer Control Register" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,ALPHA" newline eventfld.long 0x00 23. "ALPHA_OUTPUT,ALPHA_OUTPUT" "0,1" newline hexmask.long.word 0x00 10.--22. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 8.--9. "INTERLACED_OUTPUT,INTERLACED_OUTPUT" "0,1,2,3" newline eventfld.long 0x00 5.--7. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--4. "FORMAT,FORMAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2C++0x03 line.long 0x00 "HW_PXP_OUT_CTRL_TOG,Output Buffer Control Register" hexmask.long.byte 0x00 24.--31. 1. "ALPHA,ALPHA" newline bitfld.long 0x00 23. "ALPHA_OUTPUT,ALPHA_OUTPUT" "0,1" newline hexmask.long.word 0x00 10.--22. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 8.--9. "INTERLACED_OUTPUT,INTERLACED_OUTPUT" "0,1,2,3" newline rbitfld.long 0x00 5.--7. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "FORMAT,FORMAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 2. (strings "" "2" )(list 0x0 0x10 ) group.long ($2+0x30)++0x03 line.long 0x00 "HW_PXP_OUT_BUF$1,Output Frame Buffer Pointer $1" hexmask.long 0x00 0.--31. 1. "ADDR,ADDR" repeat.end group.long 0x50++0x03 line.long 0x00 "HW_PXP_OUT_PITCH,Output Buffer Pitch" hexmask.long.word 0x00 16.--31. 1. "RSVD,RSVD" newline hexmask.long.word 0x00 0.--15. 1. "PITCH,PITCH" group.long 0x60++0x03 line.long 0x00 "HW_PXP_OUT_LRC,Output Surface Lower Right Coordinate" rbitfld.long 0x00 30.--31. "RSVD1,RSVD1" "0,1,2,3" newline hexmask.long.word 0x00 16.--29. 1. "X,X" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline hexmask.long.word 0x00 0.--13. 1. "Y,Y" group.long 0x70++0x03 line.long 0x00 "HW_PXP_OUT_PS_ULC,Processed Surface Upper Left Coordinate" rbitfld.long 0x00 30.--31. "RSVD1,RSVD1" "0,1,2,3" newline hexmask.long.word 0x00 16.--29. 1. "X,X" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline hexmask.long.word 0x00 0.--13. 1. "Y,Y" group.long 0x80++0x03 line.long 0x00 "HW_PXP_OUT_PS_LRC,Processed Surface Lower Right Coordinate" rbitfld.long 0x00 30.--31. "RSVD1,RSVD1" "0,1,2,3" newline hexmask.long.word 0x00 16.--29. 1. "X,X" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline hexmask.long.word 0x00 0.--13. 1. "Y,Y" group.long 0x90++0x03 line.long 0x00 "HW_PXP_OUT_AS_ULC,Alpha Surface Upper Left Coordinate" rbitfld.long 0x00 30.--31. "RSVD1,RSVD1" "0,1,2,3" newline hexmask.long.word 0x00 16.--29. 1. "X,X" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline hexmask.long.word 0x00 0.--13. 1. "Y,Y" group.long 0xA0++0x03 line.long 0x00 "HW_PXP_OUT_AS_LRC,Alpha Surface Lower Right Coordinate" rbitfld.long 0x00 30.--31. "RSVD1,RSVD1" "0,1,2,3" newline hexmask.long.word 0x00 16.--29. 1. "X,X" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline hexmask.long.word 0x00 0.--13. 1. "Y,Y" group.long 0xB0++0x03 line.long 0x00 "HW_PXP_PS_CTRL,Processed Surface (PS) Control Register" hexmask.long.tbyte 0x00 12.--31. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 10.--11. "DECX,DECX" "0: DISABLE,1: DECX2,2: DECX4,3: DECX8" newline bitfld.long 0x00 8.--9. "DECY,DECY" "0: DISABLE,1: DECY2,2: DECY4,3: DECY8" newline rbitfld.long 0x00 7. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 6. "WB_SWAP,WB_SWAP" "0,1" newline bitfld.long 0x00 0.--5. "FORMAT,FORMAT" "?,?,?,?,4: RGB888,?,?,?,?,?,?,?,12: RGB555,13: RGB444,14: RGB565,?,16: YUV1P444,?,18: UYVY1P422,19: VYUY1P422,20: Y8,21: Y4,?,?,24: YUV2P422,25: YUV2P420,26: YVU2P422,27: YVU2P420,?,?,30: YUV422,31: YUV420,?..." group.long 0xB4++0x03 line.long 0x00 "HW_PXP_PS_CTRL_SET,Processed Surface (PS) Control Register" hexmask.long.tbyte 0x00 12.--31. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 10.--11. "DECX,DECX" "0,1,2,3" newline bitfld.long 0x00 8.--9. "DECY,DECY" "0,1,2,3" newline rbitfld.long 0x00 7. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 6. "WB_SWAP,WB_SWAP" "0,1" newline bitfld.long 0x00 0.--5. "FORMAT,FORMAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB8++0x03 line.long 0x00 "HW_PXP_PS_CTRL_CLR,Processed Surface (PS) Control Register" hexmask.long.tbyte 0x00 12.--31. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 10.--11. "DECX,DECX" "0,1,2,3" newline eventfld.long 0x00 8.--9. "DECY,DECY" "0,1,2,3" newline eventfld.long 0x00 7. "RSVD0,RSVD0" "0,1" newline eventfld.long 0x00 6. "WB_SWAP,WB_SWAP" "0,1" newline eventfld.long 0x00 0.--5. "FORMAT,FORMAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xBC++0x03 line.long 0x00 "HW_PXP_PS_CTRL_TOG,Processed Surface (PS) Control Register" hexmask.long.tbyte 0x00 12.--31. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 10.--11. "DECX,DECX" "0,1,2,3" newline bitfld.long 0x00 8.--9. "DECY,DECY" "0,1,2,3" newline rbitfld.long 0x00 7. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 6. "WB_SWAP,WB_SWAP" "0,1" newline bitfld.long 0x00 0.--5. "FORMAT,FORMAT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC0++0x03 line.long 0x00 "HW_PXP_PS_BUF,PS Input Buffer Address" hexmask.long 0x00 0.--31. 1. "ADDR,ADDR" group.long 0xD0++0x03 line.long 0x00 "HW_PXP_PS_UBUF,PS U/Cb or 2 Plane UV Input Buffer Address" hexmask.long 0x00 0.--31. 1. "ADDR,ADDR" group.long 0xE0++0x03 line.long 0x00 "HW_PXP_PS_VBUF,PS V/Cr Input Buffer Address" hexmask.long 0x00 0.--31. 1. "ADDR,ADDR" group.long 0xF0++0x03 line.long 0x00 "HW_PXP_PS_PITCH,Processed Surface Pitch" hexmask.long.word 0x00 16.--31. 1. "RSVD,RSVD" newline hexmask.long.word 0x00 0.--15. 1. "PITCH,PITCH" group.long 0x100++0x03 line.long 0x00 "HW_PXP_PS_BACKGROUND_0,PS Background Color" hexmask.long.byte 0x00 24.--31. 1. "RSVD,RSVD" newline hexmask.long.tbyte 0x00 0.--23. 1. "COLOR,COLOR" group.long 0x110++0x03 line.long 0x00 "HW_PXP_PS_SCALE,PS Scale Factor Register" rbitfld.long 0x00 31. "RSVD2,RSVD2" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "YSCALE,YSCALE" newline rbitfld.long 0x00 15. "RSVD1,RSVD1" "0,1" newline hexmask.long.word 0x00 0.--14. 1. "XSCALE,XSCALE" group.long 0x120++0x03 line.long 0x00 "HW_PXP_PS_OFFSET,PS Scale Offset Register" rbitfld.long 0x00 28.--31. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 16.--27. 1. "YOFFSET,YOFFSET" newline rbitfld.long 0x00 12.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--11. 1. "XOFFSET,XOFFSET" group.long 0x130++0x03 line.long 0x00 "HW_PXP_PS_CLRKEYLOW_0,PS Color Key Low" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x140++0x03 line.long 0x00 "HW_PXP_PS_CLRKEYHIGH_0,PS Color Key High" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x150++0x03 line.long 0x00 "HW_PXP_AS_CTRL,Alpha Surface Control" hexmask.long.word 0x00 22.--31. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 21. "ALPHA1_INVERT,ALPHA1_INVERT" "0,1" newline bitfld.long 0x00 20. "ALPHA0_INVERT,ALPHA0_INVERT" "0,1" newline bitfld.long 0x00 16.--19. "ROP,ROP" "0: MASKAS,1: MASKNOTAS,2: MASKASNOT,3: MERGEAS,4: MERGENOTAS,5: MERGEASNOT,6: NOTCOPYAS,7: NOT,8: NOTMASKAS,9: NOTMERGEAS,10: XORAS,11: NOTXORAS,?..." newline hexmask.long.byte 0x00 8.--15. 1. "ALPHA,ALPHA" newline bitfld.long 0x00 4.--7. "FORMAT,FORMAT" "0: ARGB8888,1: RGBA8888,?,?,4: RGB888,?,?,?,8: ARGB1555,9: ARGB4444,?,?,12: RGB555,13: RGB444,14: RGB565,?..." newline bitfld.long 0x00 3. "ENABLE_COLORKEY,ENABLE_COLORKEY" "0,1" newline bitfld.long 0x00 1.--2. "ALPHA_CTRL,ALPHA_CTRL" "0: Embedded,1: Override,2: Multiply,3: ROPs" newline rbitfld.long 0x00 0. "RSVD0,RSVD0" "0,1" group.long 0x160++0x03 line.long 0x00 "HW_PXP_AS_BUF,Alpha Surface Buffer Pointer" hexmask.long 0x00 0.--31. 1. "ADDR,ADDR" group.long 0x170++0x03 line.long 0x00 "HW_PXP_AS_PITCH,Alpha Surface Pitch" hexmask.long.word 0x00 16.--31. 1. "RSVD,RSVD" newline hexmask.long.word 0x00 0.--15. 1. "PITCH,PITCH" group.long 0x180++0x03 line.long 0x00 "HW_PXP_AS_CLRKEYLOW_0,Overlay Color Key Low" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x190++0x03 line.long 0x00 "HW_PXP_AS_CLRKEYHIGH_0,Overlay Color Key High" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x1A0++0x03 line.long 0x00 "HW_PXP_CSC1_COEF0,Color Space Conversion Coefficient Register 0" bitfld.long 0x00 31. "YCBCR_MODE,YCBCR_MODE" "0,1" newline bitfld.long 0x00 30. "BYPASS,BYPASS" "0,1" newline rbitfld.long 0x00 29. "RSVD1,RSVD1" "0,1" newline hexmask.long.word 0x00 18.--28. 1. "C0,C0" newline hexmask.long.word 0x00 9.--17. 1. "UV_OFFSET,UV_OFFSET" newline hexmask.long.word 0x00 0.--8. 1. "Y_OFFSET,Y_OFFSET" group.long 0x1B0++0x03 line.long 0x00 "HW_PXP_CSC1_COEF1,Color Space Conversion Coefficient Register 1" rbitfld.long 0x00 27.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 16.--26. 1. "C1,C1" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "C4,C4" group.long 0x1C0++0x03 line.long 0x00 "HW_PXP_CSC1_COEF2,Color Space Conversion Coefficient Register 2" rbitfld.long 0x00 27.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 16.--26. 1. "C2,C2" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "C3,C3" group.long 0x1D0++0x03 line.long 0x00 "HW_PXP_CSC2_CTRL,Color Space Conversion Control Register" hexmask.long 0x00 3.--31. 1. "RSVD,RSVD" newline bitfld.long 0x00 1.--2. "CSC_MODE,CSC_MODE" "0: YUV2RGB,1: YCbCr2RGB,2: RGB2YUV,3: RGB2YCbCr" newline bitfld.long 0x00 0. "BYPASS,BYPASS" "0,1" group.long 0x1E0++0x03 line.long 0x00 "HW_PXP_CSC2_COEF0,Color Space Conversion Coefficient Register 0" rbitfld.long 0x00 27.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 16.--26. 1. "A2,A2" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "A1,A1" group.long 0x1F0++0x03 line.long 0x00 "HW_PXP_CSC2_COEF1,Color Space Conversion Coefficient Register 1" rbitfld.long 0x00 27.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 16.--26. 1. "B1,B1" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "A3,A3" group.long 0x200++0x03 line.long 0x00 "HW_PXP_CSC2_COEF2,Color Space Conversion Coefficient Register 2" rbitfld.long 0x00 27.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 16.--26. 1. "B3,B3" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "B2,B2" group.long 0x210++0x03 line.long 0x00 "HW_PXP_CSC2_COEF3,Color Space Conversion Coefficient Register 3" rbitfld.long 0x00 27.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 16.--26. 1. "C2,C2" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "C1,C1" group.long 0x220++0x03 line.long 0x00 "HW_PXP_CSC2_COEF4,Color Space Conversion Coefficient Register 4" hexmask.long.byte 0x00 25.--31. 1. "RSVD1,RSVD1" newline hexmask.long.word 0x00 16.--24. 1. "D1,D1" newline rbitfld.long 0x00 11.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.word 0x00 0.--10. 1. "C3,C3" group.long 0x230++0x03 line.long 0x00 "HW_PXP_CSC2_COEF5,Color Space Conversion Coefficient Register 5" hexmask.long.byte 0x00 25.--31. 1. "RSVD1,RSVD1" newline hexmask.long.word 0x00 16.--24. 1. "D3,D3" newline hexmask.long.byte 0x00 9.--15. 1. "RSVD0,RSVD0" newline hexmask.long.word 0x00 0.--8. 1. "D2,D2" group.long 0x240++0x03 line.long 0x00 "HW_PXP_LUT_CTRL,Lookup Table Control Register" bitfld.long 0x00 31. "BYPASS,BYPASS" "0,1" newline rbitfld.long 0x00 26.--30. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "LOOKUP_MODE,LOOKUP_MODE" "0: CACHE_RGB565,1: DIRECT_Y8,2: DIRECT_RGB444,3: DIRECT_RGB454" newline rbitfld.long 0x00 18.--23. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "OUT_MODE,OUT_MODE" "?,1: Y8,2: RGBW4444CFA,3: RGB888" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "SEL_8KB,SEL_8KB" "0,1" newline bitfld.long 0x00 9. "LRU_UPD,LRU_UPD" "0,1" newline bitfld.long 0x00 8. "INVALID,INVALID" "0,1" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 0. "DMA_START,DMA_START" "0,1" group.long 0x250++0x03 line.long 0x00 "HW_PXP_LUT_ADDR,Lookup Table Control Register" rbitfld.long 0x00 31. "RSVD2,RSVD2" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "NUM_BYTES,NUM_BYTES" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline hexmask.long.word 0x00 0.--13. 1. "ADDR,ADDR" group.long 0x260++0x03 line.long 0x00 "HW_PXP_LUT_DATA,Lookup Table Data Register" hexmask.long 0x00 0.--31. 1. "DATA,DATA" group.long 0x270++0x03 line.long 0x00 "HW_PXP_LUT_EXTMEM,Lookup Table External Memory Address Register" hexmask.long 0x00 0.--31. 1. "ADDR,ADDR" group.long 0x280++0x03 line.long 0x00 "HW_PXP_CFA,Color Filter Array Register" hexmask.long 0x00 0.--31. 1. "DATA,DATA" group.long 0x290++0x03 line.long 0x00 "HW_PXP_ALPHA_A_CTRL,PXP Alpha Engine A Control Register" hexmask.long.byte 0x00 24.--31. 1. "S1_GLOBAL_ALPHA,S1_GLOBAL_ALPHA" newline hexmask.long.byte 0x00 16.--23. 1. "S0_GLOBAL_ALPHA,S0_GLOBAL_ALPHA" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 13. "S1_COLOR_MODE,S1_COLOR_MODE" "0: straight mode for s1 color,1: multiply mode for s1 color" newline bitfld.long 0x00 12. "S1_ALPHA_MODE,S1_ALPHA_MODE" "0: straight mode for s1 alpha,1: inversed mode for s1 alpha" newline bitfld.long 0x00 10.--11. "S1_GLOBAL_ALPHA_MODE,S1_GLOBAL_ALPHA_MODE" "0: using global alpha,1: using local alpha,2: using scaled alpha,3: using scaled alpha" newline bitfld.long 0x00 8.--9. "S1_S0_FACTOR_MODE,S1_S0_FACTOR_MODE" "0: using 1,1: using 0,2: using straight alpha,3: using inverse alpha" newline rbitfld.long 0x00 7. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 6. "S0_COLOR_MODE,S0_COLOR_MODE" "0: straight mode for s0 color,1: multiply mode for s0 color" newline bitfld.long 0x00 5. "S0_ALPHA_MODE,S0_ALPHA_MODE" "0: straight mode for s0 alpha,1: inversed mode for s0 alpha" newline bitfld.long 0x00 3.--4. "S0_GLOBAL_ALPHA_MODE,S0_GLOBAL_ALPHA_MODE" "0: using global alpha,1: using local alpha,2: using scaled alpha,3: using scaled alpha" newline bitfld.long 0x00 1.--2. "S0_S1_FACTOR_MODE,S0_S1_FACTOR_MODE" "0: using 1,1: using 0,2: using straight alpha,3: using inverse alpha" newline bitfld.long 0x00 0. "PORTER_DUFF_ENABLE,PORTER_DUFF_ENABLE" "0: porter duff disable,1: porter duff enable" group.long 0x2A0++0x03 line.long 0x00 "HW_PXP_ALPHA_B_CTRL,PXP Alpha Engine B Control Register" hexmask.long.byte 0x00 24.--31. 1. "S1_GLOBAL_ALPHA,S1_GLOBAL_ALPHA" newline hexmask.long.byte 0x00 16.--23. 1. "S0_GLOBAL_ALPHA,S0_GLOBAL_ALPHA" newline rbitfld.long 0x00 14.--15. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 13. "S1_COLOR_MODE,S1_COLOR_MODE" "0: straight mode for s1 color,1: multiply mode for s1 color" newline bitfld.long 0x00 12. "S1_ALPHA_MODE,S1_ALPHA_MODE" "0: straight mode for s1 alpha,1: inversed mode for s1 alpha" newline bitfld.long 0x00 10.--11. "S1_GLOBAL_ALPHA_MODE,S1_GLOBAL_ALPHA_MODE" "0: using global alpha,1: using local alpha,2: using scaled alpha,3: using scaled alpha" newline bitfld.long 0x00 8.--9. "S1_S0_FACTOR_MODE,S1_S0_FACTOR_MODE" "0: using 1,1: using 0,2: using straight alpha,3: using inverse alpha" newline rbitfld.long 0x00 7. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 6. "S0_COLOR_MODE,S0_COLOR_MODE" "0: straight mode for s0 color,1: multiply mode for s0 color" newline bitfld.long 0x00 5. "S0_ALPHA_MODE,S0_ALPHA_MODE" "0: straight mode for s0 alpha,1: inversed mode for s0 alpha" newline bitfld.long 0x00 3.--4. "S0_GLOBAL_ALPHA_MODE,S0_GLOBAL_ALPHA_MODE" "0: using global alpha,1: using local alpha,2: using scaled alpha,3: using scaled alpha" newline bitfld.long 0x00 1.--2. "S0_S1_FACTOR_MODE,S0_S1_FACTOR_MODE" "0: using 1,1: using 0,2: using straight alpha,3: using inverse alpha" newline bitfld.long 0x00 0. "PORTER_DUFF_ENABLE,PORTER_DUFF_ENABLE" "0: porter duff disable,1: porter duff enable" group.long 0x2B0++0x03 line.long 0x00 "HW_PXP_ALPHA_B_CTRL_1,This register defines software define pixels for alpha blending" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 4.--7. "ROP,ROP" "0: MASKAS,1: MASKNOTAS,2: MASKASNOT,3: MERGEAS,4: MERGENOTAS,5: MERGEASNOT,6: NOTCOPYAS,7: NOT,8: NOTMASKAS,9: NOTMERGEAS,10: XORAS,11: NOTXORAS,?..." newline rbitfld.long 0x00 2.--3. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 1. "OL_CLRKEY_ENABLE,OL_CLRKEY_ENABLE" "0,1" newline bitfld.long 0x00 0. "ROP_ENABLE,ROP_ENABLE" "0,1" group.long 0x2C0++0x03 line.long 0x00 "HW_PXP_PS_BACKGROUND_1,PS Background Color 1" hexmask.long.byte 0x00 24.--31. 1. "RSVD,RSVD" newline hexmask.long.tbyte 0x00 0.--23. 1. "COLOR,COLOR" group.long 0x2D0++0x03 line.long 0x00 "HW_PXP_PS_CLRKEYLOW_1,PS Color Key Low 1" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x2E0++0x03 line.long 0x00 "HW_PXP_PS_CLRKEYHIGH_1,PS Color Key High 1" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x2F0++0x03 line.long 0x00 "HW_PXP_AS_CLRKEYLOW_1,Overlay Color Key Low" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x300++0x03 line.long 0x00 "HW_PXP_AS_CLRKEYHIGH_1,Overlay Color Key High" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.tbyte 0x00 0.--23. 1. "PIXEL,PIXEL" group.long 0x310++0x03 line.long 0x00 "HW_PXP_CTRL2,Control Register 2" rbitfld.long 0x00 28.--31. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline bitfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline bitfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline bitfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline bitfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0: BLK_SIZE_8X8,1: BLK_SIZE_16X16" newline rbitfld.long 0x00 22. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline bitfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline bitfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline bitfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline bitfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline rbitfld.long 0x00 16. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline bitfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline bitfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0: no description available,1: no description available,2: no description available,3: no description available" newline bitfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline bitfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline bitfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0: no description available,1: no description available,2: no description available,3: no description available" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x314++0x03 line.long 0x00 "HW_PXP_CTRL2_SET,Control Register 2" rbitfld.long 0x00 28.--31. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline bitfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline bitfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline bitfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline bitfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0,1" newline rbitfld.long 0x00 22. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline bitfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline bitfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline bitfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline bitfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline rbitfld.long 0x00 16. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline bitfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline bitfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0,1,2,3" newline bitfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline bitfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline bitfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0,1,2,3" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x318++0x03 line.long 0x00 "HW_PXP_CTRL2_CLR,Control Register 2" eventfld.long 0x00 28.--31. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline eventfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline eventfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline eventfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline eventfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0,1" newline eventfld.long 0x00 22. "RSVD2,RSVD2" "0,1" newline eventfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline eventfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline eventfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline eventfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline eventfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline eventfld.long 0x00 16. "RSVD1,RSVD1" "0,1" newline eventfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline eventfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline eventfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0,1,2,3" newline eventfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline eventfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline eventfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0,1,2,3" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x31C++0x03 line.long 0x00 "HW_PXP_CTRL2_TOG,Control Register 2" rbitfld.long 0x00 28.--31. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 27. "ENABLE_ROTATE1,ENABLE_ROTATE1" "0,1" newline bitfld.long 0x00 26. "ENABLE_ROTATE0,ENABLE_ROTATE0" "0,1" newline bitfld.long 0x00 25. "ENABLE_LUT,ENABLE_LUT" "0,1" newline bitfld.long 0x00 24. "ENABLE_CSC2,ENABLE_CSC2" "0,1" newline bitfld.long 0x00 23. "BLOCK_SIZE,BLOCK_SIZE" "0,1" newline rbitfld.long 0x00 22. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 21. "ENABLE_ALPHA_B,ENABLE_ALPHA_B" "0,1" newline bitfld.long 0x00 20. "ENABLE_INPUT_FETCH_STORE,ENABLE_INPUT_FETCH_STORE" "0,1" newline bitfld.long 0x00 19. "ENABLE_WFE_B,ENABLE_WFE_B" "0,1" newline bitfld.long 0x00 18. "ENABLE_WFE_A,ENABLE_WFE_A" "0,1" newline bitfld.long 0x00 17. "ENABLE_DITHER,ENABLE_DITHER" "0,1" newline rbitfld.long 0x00 16. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 15. "VFLIP1,VFLIP1" "0,1" newline bitfld.long 0x00 14. "HFLIP1,HFLIP1" "0,1" newline bitfld.long 0x00 12.--13. "ROTATE1,ROTATE1" "0,1,2,3" newline bitfld.long 0x00 11. "VFLIP0,VFLIP0" "0,1" newline bitfld.long 0x00 10. "HFLIP0,HFLIP0" "0,1" newline bitfld.long 0x00 8.--9. "ROTATE0,ROTATE0" "0,1,2,3" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x320++0x03 line.long 0x00 "HW_PXP_POWER_REG0,PXP Power Control Register" hexmask.long.tbyte 0x00 12.--31. 1. "CTRL,CTRL" newline bitfld.long 0x00 9.--11. "ROT0_MEM_LP_STATE,ROT0_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 6.--8. "LUT_LP_STATE_WAY1_BANKN,LUT_LP_STATE_WAY1_BANKN" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 3.--5. "LUT_LP_STATE_WAY0_BANKN,LUT_LP_STATE_WAY0_BANKN" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 0.--2. "LUT_LP_STATE_WAY0_BANK0,LUT_LP_STATE_WAY0_BANK0" "0: NONE,1: LS,2: DS,?,4: SD,?..." group.long 0x330++0x03 line.long 0x00 "HW_PXP_POWER_REG1,PXP Power Control Register 1" hexmask.long.byte 0x00 24.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 21.--23. "ALU_B_MEM_LP_STATE,ALU_B_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 18.--20. "ALU_A_MEM_LP_STATE,ALU_A_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 15.--17. "DITH2_LUT_MEM_LP_STATE,DITH2_LUT_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 12.--14. "DITH1_LUT_MEM_LP_STATE,DITH1_LUT_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 9.--11. "DITH0_ERR1_MEM_LP_STATE,DITH0_ERR1_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 6.--8. "DITH0_ERR0_MEM_LP_STATE,DITH0_ERR0_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 3.--5. "DITH0_LUT_MEM_LP_STATE,DITH0_LUT_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." newline bitfld.long 0x00 0.--2. "ROT1_MEM_LP_STATE,ROT1_MEM_LP_STATE" "0: NONE,1: LS,2: DS,?,4: SD,?..." group.long 0x340++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL0,This register helps decide the data path gthrough the PXP" bitfld.long 0x00 30.--31. "MUX15_SEL,MUX15_SEL" "0: Output of Input fetch Channel 0,1: Output of MUX 10,2: No output,3: No Output" newline bitfld.long 0x00 28.--29. "MUX14_SEL,MUX14_SEL" "0: Output of Rotation 0,1: Output of MUX 11,2: No output,3: No Output" newline bitfld.long 0x00 26.--27. "MUX13_SEL,MUX13_SEL" "0: No output,1: Input stage Fetch engine Channel 1,2: No output,3: No Output" newline bitfld.long 0x00 24.--25. "MUX12_SEL,MUX12_SEL" "0: Output of MUX 10,1: Output of MUX 11,2: No output,3: No Output" newline bitfld.long 0x00 22.--23. "MUX11_SEL,MUX11_SEL" "0: Output of LUT,1: Output of MUX 8,2: No output,3: No Output" newline bitfld.long 0x00 20.--21. "MUX10_SEL,MUX10_SEL" "0: Output of MUX 7,1: Output of LUT,2: No output,3: No Output" newline bitfld.long 0x00 18.--19. "MUX9_SEL,MUX9_SEL" "0: Output of MUX 7,1: Output of MUX 8,2: No output,3: No Output" newline bitfld.long 0x00 16.--17. "MUX8_SEL,MUX8_SEL" "0: Output of CSC2,1: Output of alpha blending / color key 0,2: No output,3: No Output" newline bitfld.long 0x00 14.--15. "MUX7_SEL,MUX7_SEL" "0: Output of MUX 5,1: Output of CSC2,2: No output,3: No Output" newline bitfld.long 0x00 12.--13. "MUX6_SEL,MUX6_SEL" "0: Output of alpha blending / color key 1,1: Output of alpha blending / color key 0,2: No output,3: No Output" newline bitfld.long 0x00 10.--11. "MUX5_SEL,MUX5_SEL" "0: Output of MUX1,1: Output of alpha blending / color key 1,2: No output,3: No Output" newline bitfld.long 0x00 8.--9. "MUX4_SEL,MUX4_SEL" "0: No output,1: No output,2: No output,3: No Output" newline bitfld.long 0x00 6.--7. "MUX3_SEL,MUX3_SEL" "0: Output of the CSC1 engine,1: Output of the Rotation1 engine,2: No output,3: No Output" newline bitfld.long 0x00 4.--5. "MUX2_SEL,MUX2_SEL" "0: Input stage Fetch engine Channel 1,1: Output of the Rotation1 engine,2: No output,3: No Output" newline bitfld.long 0x00 2.--3. "MUX1_SEL,MUX1_SEL" "0: Input stage Fetch engine Channel 0,1: Output of the Rotation1 engine,2: No output,3: No Output" newline bitfld.long 0x00 0.--1. "MUX0_SEL,MUX0_SEL" "0: Input from Process Surface engine,1: Input stage Fetch engine Channel 0,2: Input stage Fetch engine Channel 1,3: No output" group.long 0x344++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL0_SET,This register helps decide the data path gthrough the PXP" bitfld.long 0x00 30.--31. "MUX15_SEL,MUX15_SEL" "0,1,2,3" newline bitfld.long 0x00 28.--29. "MUX14_SEL,MUX14_SEL" "0,1,2,3" newline bitfld.long 0x00 26.--27. "MUX13_SEL,MUX13_SEL" "0,1,2,3" newline bitfld.long 0x00 24.--25. "MUX12_SEL,MUX12_SEL" "0,1,2,3" newline bitfld.long 0x00 22.--23. "MUX11_SEL,MUX11_SEL" "0,1,2,3" newline bitfld.long 0x00 20.--21. "MUX10_SEL,MUX10_SEL" "0,1,2,3" newline bitfld.long 0x00 18.--19. "MUX9_SEL,MUX9_SEL" "0,1,2,3" newline bitfld.long 0x00 16.--17. "MUX8_SEL,MUX8_SEL" "0,1,2,3" newline bitfld.long 0x00 14.--15. "MUX7_SEL,MUX7_SEL" "0,1,2,3" newline bitfld.long 0x00 12.--13. "MUX6_SEL,MUX6_SEL" "0,1,2,3" newline bitfld.long 0x00 10.--11. "MUX5_SEL,MUX5_SEL" "0,1,2,3" newline bitfld.long 0x00 8.--9. "MUX4_SEL,MUX4_SEL" "0,1,2,3" newline bitfld.long 0x00 6.--7. "MUX3_SEL,MUX3_SEL" "0,1,2,3" newline bitfld.long 0x00 4.--5. "MUX2_SEL,MUX2_SEL" "0,1,2,3" newline bitfld.long 0x00 2.--3. "MUX1_SEL,MUX1_SEL" "0,1,2,3" newline bitfld.long 0x00 0.--1. "MUX0_SEL,MUX0_SEL" "0,1,2,3" group.long 0x348++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL0_CLR,This register helps decide the data path gthrough the PXP" eventfld.long 0x00 30.--31. "MUX15_SEL,MUX15_SEL" "0,1,2,3" newline eventfld.long 0x00 28.--29. "MUX14_SEL,MUX14_SEL" "0,1,2,3" newline eventfld.long 0x00 26.--27. "MUX13_SEL,MUX13_SEL" "0,1,2,3" newline eventfld.long 0x00 24.--25. "MUX12_SEL,MUX12_SEL" "0,1,2,3" newline eventfld.long 0x00 22.--23. "MUX11_SEL,MUX11_SEL" "0,1,2,3" newline eventfld.long 0x00 20.--21. "MUX10_SEL,MUX10_SEL" "0,1,2,3" newline eventfld.long 0x00 18.--19. "MUX9_SEL,MUX9_SEL" "0,1,2,3" newline eventfld.long 0x00 16.--17. "MUX8_SEL,MUX8_SEL" "0,1,2,3" newline eventfld.long 0x00 14.--15. "MUX7_SEL,MUX7_SEL" "0,1,2,3" newline eventfld.long 0x00 12.--13. "MUX6_SEL,MUX6_SEL" "0,1,2,3" newline eventfld.long 0x00 10.--11. "MUX5_SEL,MUX5_SEL" "0,1,2,3" newline eventfld.long 0x00 8.--9. "MUX4_SEL,MUX4_SEL" "0,1,2,3" newline eventfld.long 0x00 6.--7. "MUX3_SEL,MUX3_SEL" "0,1,2,3" newline eventfld.long 0x00 4.--5. "MUX2_SEL,MUX2_SEL" "0,1,2,3" newline eventfld.long 0x00 2.--3. "MUX1_SEL,MUX1_SEL" "0,1,2,3" newline eventfld.long 0x00 0.--1. "MUX0_SEL,MUX0_SEL" "0,1,2,3" group.long 0x34C++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL0_TOG,This register helps decide the data path gthrough the PXP" bitfld.long 0x00 30.--31. "MUX15_SEL,MUX15_SEL" "0,1,2,3" newline bitfld.long 0x00 28.--29. "MUX14_SEL,MUX14_SEL" "0,1,2,3" newline bitfld.long 0x00 26.--27. "MUX13_SEL,MUX13_SEL" "0,1,2,3" newline bitfld.long 0x00 24.--25. "MUX12_SEL,MUX12_SEL" "0,1,2,3" newline bitfld.long 0x00 22.--23. "MUX11_SEL,MUX11_SEL" "0,1,2,3" newline bitfld.long 0x00 20.--21. "MUX10_SEL,MUX10_SEL" "0,1,2,3" newline bitfld.long 0x00 18.--19. "MUX9_SEL,MUX9_SEL" "0,1,2,3" newline bitfld.long 0x00 16.--17. "MUX8_SEL,MUX8_SEL" "0,1,2,3" newline bitfld.long 0x00 14.--15. "MUX7_SEL,MUX7_SEL" "0,1,2,3" newline bitfld.long 0x00 12.--13. "MUX6_SEL,MUX6_SEL" "0,1,2,3" newline bitfld.long 0x00 10.--11. "MUX5_SEL,MUX5_SEL" "0,1,2,3" newline bitfld.long 0x00 8.--9. "MUX4_SEL,MUX4_SEL" "0,1,2,3" newline bitfld.long 0x00 6.--7. "MUX3_SEL,MUX3_SEL" "0,1,2,3" newline bitfld.long 0x00 4.--5. "MUX2_SEL,MUX2_SEL" "0,1,2,3" newline bitfld.long 0x00 2.--3. "MUX1_SEL,MUX1_SEL" "0,1,2,3" newline bitfld.long 0x00 0.--1. "MUX0_SEL,MUX0_SEL" "0,1,2,3" group.long 0x350++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL1,This register helps decide the data path gthrough the PXP" hexmask.long 0x00 4.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 2.--3. "MUX17_SEL,MUX17_SEL" "0: Output of ALU A,1: Output of ALU B,2: No output,3: No Output" newline bitfld.long 0x00 0.--1. "MUX16_SEL,MUX16_SEL" "0: Output of ALU A Engine,1: histogram_pixel output from output,2: Output of ALU B Engine,3: No output" group.long 0x354++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL1_SET,This register helps decide the data path gthrough the PXP" hexmask.long 0x00 4.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 2.--3. "MUX17_SEL,MUX17_SEL" "0,1,2,3" newline bitfld.long 0x00 0.--1. "MUX16_SEL,MUX16_SEL" "0,1,2,3" group.long 0x358++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL1_CLR,This register helps decide the data path gthrough the PXP" hexmask.long 0x00 4.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 2.--3. "MUX17_SEL,MUX17_SEL" "0,1,2,3" newline eventfld.long 0x00 0.--1. "MUX16_SEL,MUX16_SEL" "0,1,2,3" group.long 0x35C++0x03 line.long 0x00 "HW_PXP_DATA_PATH_CTRL1_TOG,This register helps decide the data path gthrough the PXP" hexmask.long 0x00 4.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 2.--3. "MUX17_SEL,MUX17_SEL" "0,1,2,3" newline bitfld.long 0x00 0.--1. "MUX16_SEL,MUX16_SEL" "0,1,2,3" group.long 0x360++0x03 line.long 0x00 "HW_PXP_INIT_MEM_CTRL,Initialize memory buffer control Register" bitfld.long 0x00 31. "START,START" "0,1" newline bitfld.long 0x00 27.--30. "SELECT,SELECT" "0: DITHER0_LUT,1: DITHER0_ERR0,2: DITHER0_ERR1,3: DITHER1_LUT,4: DITHER2_LUT,5: ALU_A,6: ALU_B,7: WFE_A_FETCH,8: WFE_B_FETCH,?..." newline hexmask.long.word 0x00 16.--26. 1. "RSVD0,RSVD0" newline hexmask.long.word 0x00 0.--15. 1. "ADDR,ADDR" group.long 0x364++0x03 line.long 0x00 "HW_PXP_INIT_MEM_CTRL_SET,Initialize memory buffer control Register" bitfld.long 0x00 31. "START,START" "0,1" newline bitfld.long 0x00 27.--30. "SELECT,SELECT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 16.--26. 1. "RSVD0,RSVD0" newline hexmask.long.word 0x00 0.--15. 1. "ADDR,ADDR" group.long 0x368++0x03 line.long 0x00 "HW_PXP_INIT_MEM_CTRL_CLR,Initialize memory buffer control Register" eventfld.long 0x00 31. "START,START" "0,1" newline eventfld.long 0x00 27.--30. "SELECT,SELECT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 16.--26. 1. "RSVD0,RSVD0" newline hexmask.long.word 0x00 0.--15. 1. "ADDR,ADDR" group.long 0x36C++0x03 line.long 0x00 "HW_PXP_INIT_MEM_CTRL_TOG,Initialize memory buffer control Register" bitfld.long 0x00 31. "START,START" "0,1" newline bitfld.long 0x00 27.--30. "SELECT,SELECT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 16.--26. 1. "RSVD0,RSVD0" newline hexmask.long.word 0x00 0.--15. 1. "ADDR,ADDR" group.long 0x370++0x03 line.long 0x00 "HW_PXP_INIT_MEM_DATA,Write data Register" hexmask.long 0x00 0.--31. 1. "DATA,DATA" group.long 0x380++0x03 line.long 0x00 "HW_PXP_INIT_MEM_DATA_HIGH,Write data Register" hexmask.long 0x00 0.--31. 1. "DATA,DATA" group.long 0x390++0x03 line.long 0x00 "HW_PXP_IRQ_MASK,PXP IRQ Mask Register" bitfld.long 0x00 31. "COMPRESS_DONE_IRQ_EN,COMPRESS_DONE_IRQ_EN" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 15. "WFE_B_STORE_IRQ_EN,WFE_B_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 14. "WFE_A_STORE_IRQ_EN,WFE_A_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 13. "DITHER_STORE_IRQ_EN,DITHER_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 12. "FIRST_STORE_IRQ_EN,FIRST_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ_EN,WFE_B_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ_EN,WFE_B_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ_EN,WFE_A_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ_EN,WFE_A_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 7. "DITHER_CH1_STORE_IRQ_EN,DITHER_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 6. "DITHER_CH0_STORE_IRQ_EN,DITHER_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ_EN,DITHER_CH1_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ_EN,DITHER_CH0_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 3. "FIRST_CH1_STORE_IRQ_EN,FIRST_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 2. "FIRST_CH0_STORE_IRQ_EN,FIRST_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ_EN,FIRST_CH1_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ_EN,FIRST_CH0_PREFETCH_IRQ_EN" "0,1" group.long 0x394++0x03 line.long 0x00 "HW_PXP_IRQ_MASK_SET,PXP IRQ Mask Register" bitfld.long 0x00 31. "COMPRESS_DONE_IRQ_EN,COMPRESS_DONE_IRQ_EN" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 15. "WFE_B_STORE_IRQ_EN,WFE_B_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 14. "WFE_A_STORE_IRQ_EN,WFE_A_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 13. "DITHER_STORE_IRQ_EN,DITHER_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 12. "FIRST_STORE_IRQ_EN,FIRST_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ_EN,WFE_B_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ_EN,WFE_B_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ_EN,WFE_A_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ_EN,WFE_A_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 7. "DITHER_CH1_STORE_IRQ_EN,DITHER_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 6. "DITHER_CH0_STORE_IRQ_EN,DITHER_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ_EN,DITHER_CH1_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ_EN,DITHER_CH0_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 3. "FIRST_CH1_STORE_IRQ_EN,FIRST_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 2. "FIRST_CH0_STORE_IRQ_EN,FIRST_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ_EN,FIRST_CH1_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ_EN,FIRST_CH0_PREFETCH_IRQ_EN" "0,1" group.long 0x398++0x03 line.long 0x00 "HW_PXP_IRQ_MASK_CLR,PXP IRQ Mask Register" eventfld.long 0x00 31. "COMPRESS_DONE_IRQ_EN,COMPRESS_DONE_IRQ_EN" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 15. "WFE_B_STORE_IRQ_EN,WFE_B_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 14. "WFE_A_STORE_IRQ_EN,WFE_A_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 13. "DITHER_STORE_IRQ_EN,DITHER_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 12. "FIRST_STORE_IRQ_EN,FIRST_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ_EN,WFE_B_CH1_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ_EN,WFE_B_CH0_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ_EN,WFE_A_CH1_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ_EN,WFE_A_CH0_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 7. "DITHER_CH1_STORE_IRQ_EN,DITHER_CH1_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 6. "DITHER_CH0_STORE_IRQ_EN,DITHER_CH0_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ_EN,DITHER_CH1_PREFETCH_IRQ_EN" "0,1" newline eventfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ_EN,DITHER_CH0_PREFETCH_IRQ_EN" "0,1" newline eventfld.long 0x00 3. "FIRST_CH1_STORE_IRQ_EN,FIRST_CH1_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 2. "FIRST_CH0_STORE_IRQ_EN,FIRST_CH0_STORE_IRQ_EN" "0,1" newline eventfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ_EN,FIRST_CH1_PREFETCH_IRQ_EN" "0,1" newline eventfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ_EN,FIRST_CH0_PREFETCH_IRQ_EN" "0,1" group.long 0x39C++0x03 line.long 0x00 "HW_PXP_IRQ_MASK_TOG,PXP IRQ Mask Register" bitfld.long 0x00 31. "COMPRESS_DONE_IRQ_EN,COMPRESS_DONE_IRQ_EN" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 15. "WFE_B_STORE_IRQ_EN,WFE_B_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 14. "WFE_A_STORE_IRQ_EN,WFE_A_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 13. "DITHER_STORE_IRQ_EN,DITHER_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 12. "FIRST_STORE_IRQ_EN,FIRST_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ_EN,WFE_B_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ_EN,WFE_B_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ_EN,WFE_A_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ_EN,WFE_A_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 7. "DITHER_CH1_STORE_IRQ_EN,DITHER_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 6. "DITHER_CH0_STORE_IRQ_EN,DITHER_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ_EN,DITHER_CH1_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ_EN,DITHER_CH0_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 3. "FIRST_CH1_STORE_IRQ_EN,FIRST_CH1_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 2. "FIRST_CH0_STORE_IRQ_EN,FIRST_CH0_STORE_IRQ_EN" "0,1" newline bitfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ_EN,FIRST_CH1_PREFETCH_IRQ_EN" "0,1" newline bitfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ_EN,FIRST_CH0_PREFETCH_IRQ_EN" "0,1" group.long 0x3A0++0x03 line.long 0x00 "HW_PXP_IRQ,PXP Interrupt Register" eventfld.long 0x00 31. "COMPRESS_DONE_IRQ,COMPRESS_DONE_IRQ" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 15. "WFE_B_STORE_IRQ,WFE_B_STORE_IRQ" "0,1" newline eventfld.long 0x00 14. "WFE_A_STORE_IRQ,WFE_A_STORE_IRQ" "0,1" newline eventfld.long 0x00 13. "DITHER_STORE_IRQ,DITHER_STORE_IRQ" "0,1" newline eventfld.long 0x00 12. "FIRST_STORE_IRQ,FIRST_STORE_IRQ" "0,1" newline eventfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ,WFE_B_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ,WFE_B_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ,WFE_A_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ,WFE_A_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 7. "DITHER_CH1_STORE_IRQ,DITHER_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 6. "DITHER_CH0_STORE_IRQ,DITHER_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ,DITHER_CH1_PREFETCH_IRQ" "0,1" newline eventfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ,DITHER_CH0_PREFETCH_IRQ" "0,1" newline eventfld.long 0x00 3. "FIRST_CH1_STORE_IRQ,FIRST_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 2. "FIRST_CH0_STORE_IRQ,FIRST_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ,FIRST_CH1_PREFETCH_IRQ" "0,1" newline eventfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ,FIRST_CH0_PREFETCH_IRQ" "0,1" group.long 0x3A4++0x03 line.long 0x00 "HW_PXP_IRQ_SET,PXP Interrupt Register" bitfld.long 0x00 31. "COMPRESS_DONE_IRQ,COMPRESS_DONE_IRQ" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 15. "WFE_B_STORE_IRQ,WFE_B_STORE_IRQ" "0,1" newline bitfld.long 0x00 14. "WFE_A_STORE_IRQ,WFE_A_STORE_IRQ" "0,1" newline bitfld.long 0x00 13. "DITHER_STORE_IRQ,DITHER_STORE_IRQ" "0,1" newline bitfld.long 0x00 12. "FIRST_STORE_IRQ,FIRST_STORE_IRQ" "0,1" newline bitfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ,WFE_B_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ,WFE_B_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ,WFE_A_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ,WFE_A_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 7. "DITHER_CH1_STORE_IRQ,DITHER_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 6. "DITHER_CH0_STORE_IRQ,DITHER_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ,DITHER_CH1_PREFETCH_IRQ" "0,1" newline bitfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ,DITHER_CH0_PREFETCH_IRQ" "0,1" newline bitfld.long 0x00 3. "FIRST_CH1_STORE_IRQ,FIRST_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 2. "FIRST_CH0_STORE_IRQ,FIRST_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ,FIRST_CH1_PREFETCH_IRQ" "0,1" newline bitfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ,FIRST_CH0_PREFETCH_IRQ" "0,1" group.long 0x3A8++0x03 line.long 0x00 "HW_PXP_IRQ_CLR,PXP Interrupt Register" eventfld.long 0x00 31. "COMPRESS_DONE_IRQ,COMPRESS_DONE_IRQ" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 15. "WFE_B_STORE_IRQ,WFE_B_STORE_IRQ" "0,1" newline eventfld.long 0x00 14. "WFE_A_STORE_IRQ,WFE_A_STORE_IRQ" "0,1" newline eventfld.long 0x00 13. "DITHER_STORE_IRQ,DITHER_STORE_IRQ" "0,1" newline eventfld.long 0x00 12. "FIRST_STORE_IRQ,FIRST_STORE_IRQ" "0,1" newline eventfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ,WFE_B_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ,WFE_B_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ,WFE_A_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ,WFE_A_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 7. "DITHER_CH1_STORE_IRQ,DITHER_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 6. "DITHER_CH0_STORE_IRQ,DITHER_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ,DITHER_CH1_PREFETCH_IRQ" "0,1" newline eventfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ,DITHER_CH0_PREFETCH_IRQ" "0,1" newline eventfld.long 0x00 3. "FIRST_CH1_STORE_IRQ,FIRST_CH1_STORE_IRQ" "0,1" newline eventfld.long 0x00 2. "FIRST_CH0_STORE_IRQ,FIRST_CH0_STORE_IRQ" "0,1" newline eventfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ,FIRST_CH1_PREFETCH_IRQ" "0,1" newline eventfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ,FIRST_CH0_PREFETCH_IRQ" "0,1" group.long 0x3AC++0x03 line.long 0x00 "HW_PXP_IRQ_TOG,PXP Interrupt Register" bitfld.long 0x00 31. "COMPRESS_DONE_IRQ,COMPRESS_DONE_IRQ" "0,1" newline hexmask.long.word 0x00 16.--30. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 15. "WFE_B_STORE_IRQ,WFE_B_STORE_IRQ" "0,1" newline bitfld.long 0x00 14. "WFE_A_STORE_IRQ,WFE_A_STORE_IRQ" "0,1" newline bitfld.long 0x00 13. "DITHER_STORE_IRQ,DITHER_STORE_IRQ" "0,1" newline bitfld.long 0x00 12. "FIRST_STORE_IRQ,FIRST_STORE_IRQ" "0,1" newline bitfld.long 0x00 11. "WFE_B_CH1_STORE_IRQ,WFE_B_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 10. "WFE_B_CH0_STORE_IRQ,WFE_B_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 9. "WFE_A_CH1_STORE_IRQ,WFE_A_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 8. "WFE_A_CH0_STORE_IRQ,WFE_A_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 7. "DITHER_CH1_STORE_IRQ,DITHER_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 6. "DITHER_CH0_STORE_IRQ,DITHER_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 5. "DITHER_CH1_PREFETCH_IRQ,DITHER_CH1_PREFETCH_IRQ" "0,1" newline bitfld.long 0x00 4. "DITHER_CH0_PREFETCH_IRQ,DITHER_CH0_PREFETCH_IRQ" "0,1" newline bitfld.long 0x00 3. "FIRST_CH1_STORE_IRQ,FIRST_CH1_STORE_IRQ" "0,1" newline bitfld.long 0x00 2. "FIRST_CH0_STORE_IRQ,FIRST_CH0_STORE_IRQ" "0,1" newline bitfld.long 0x00 1. "FIRST_CH1_PREFETCH_IRQ,FIRST_CH1_PREFETCH_IRQ" "0,1" newline bitfld.long 0x00 0. "FIRST_CH0_PREFETCH_IRQ,FIRST_CH0_PREFETCH_IRQ" "0,1" group.long 0x400++0x03 line.long 0x00 "HW_PXP_NEXT,Next Frame Pointer" hexmask.long 0x00 2.--31. 1. "POINTER,POINTER" newline rbitfld.long 0x00 1. "RSVD,RSVD" "0,1" newline rbitfld.long 0x00 0. "ENABLED,ENABLED" "0,1" group.long 0x450++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH0,Pre-fetch engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0: Arbitration disable,1: Arbitration enable" newline rbitfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0: 1 line,1: 8 lines,2: 16 lines,3: 16 lines" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0: ROT_0,1: ROT_90,2: ROT_180,3: ROT_270" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0: VFLIP disable,1: VFLIP enable" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0: HFLIP disable,1: VFLIP enable" newline rbitfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0: In 64 bit mode the output high byte will use..,1: In 64 bit mode the output high byte will use.." newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0: Channel 0 is from memory,1: Channel 0 is from previous process engine" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the store engine is disabled,1: Handshake with the store engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Prefetch in scan mode,1: Prefetch in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Prefetch function is disable,1: Prefetch function is enable" group.long 0x454++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH0_SET,Pre-fetch engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0,1" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x458++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH0_CLR,Pre-fetch engine Control Channel 0 Register" eventfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline eventfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline eventfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline eventfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline eventfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline eventfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0,1" newline eventfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x45C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH0_TOG,Pre-fetch engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0,1" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x460++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH1,Pre-fetch engine Control Channel 1 Register" rbitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0: 1 line,1: 8 lines,2: 16 lines,3: 16 lines" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0: ROT_0,1: ROT_90,2: ROT_180,3: ROT_270" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0: VFLIP disable,1: VFLIP enable" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0: HFLIP disable,1: VFLIP enable" newline rbitfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0: Channel 1 is from memory,1: Channel 1 is from previous process engine" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the store engine is disabled,1: Handshake with the store engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Prefetch in scan mode,1: Prefetch in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: prefetch function is disable,1: prefetch function is enable" group.long 0x464++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH1_SET,Pre-fetch engine Control Channel 1 Register" rbitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x468++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH1_CLR,Pre-fetch engine Control Channel 1 Register" eventfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline eventfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline eventfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline eventfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline eventfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x46C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_CTRL_CH1_TOG,Pre-fetch engine Control Channel 1 Register" rbitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" rgroup.long 0x470++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_STATUS_CH0,Pre-fetch engine status Channel 0 Register" hexmask.long.word 0x00 16.--31. 1. "PREFETCH_BLOCK_Y,PREFETCH_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "PREFETCH_BLOCK_X,PREFETCH_BLOCK_X" rgroup.long 0x480++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_STATUS_CH1,Store engine status Channel 1 Register" hexmask.long.word 0x00 16.--31. 1. "PREFETCH_BLOCK_Y,PREFETCH_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "PREFETCH_BLOCK_X,PREFETCH_BLOCK_X" group.long 0x490++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ACTIVE_SIZE_ULC_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_ULC_Y,ACTIVE_SIZE_ULC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_ULC_X,ACTIVE_SIZE_ULC_X" group.long 0x4A0++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ACTIVE_SIZE_LRC_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_LRC_Y,ACTIVE_SIZE_LRC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_LRC_X,ACTIVE_SIZE_LRC_X" group.long 0x4B0++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ACTIVE_SIZE_ULC_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_ULC_Y,ACTIVE_SIZE_ULC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_ULC_X,ACTIVE_SIZE_ULC_X" group.long 0x4C0++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ACTIVE_SIZE_LRC_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_LRC_Y,ACTIVE_SIZE_LRC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_LRC_X,ACTIVE_SIZE_LRC_X" repeat 2. (strings "0" "1" )(list 0x00 0x10 ) group.long ($2+0x4D0)++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SIZE_CH$1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "INPUT_TOTAL_HEIGHT,INPUT_TOTAL_HEIGHT" newline hexmask.long.word 0x00 0.--15. 1. "INPUT_TOTAL_WIDTH,INPUT_TOTAL_WIDTH" repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x10 ) group.long ($2+0x4F0)++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_BACKGROUND_COLOR_CH$1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "BACKGROUND_COLOR,BACKGROUND_COLOR" repeat.end group.long 0x510++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_PITCH,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "CH1_INPUT_PITCH,CH1_INPUT_PITCH" newline hexmask.long.word 0x00 0.--15. 1. "CH0_INPUT_PITCH,CH0_INPUT_PITCH" group.long 0x520++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0: channel0 data will do shift function,1: channel0 will bypass shift function" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0: channel0 format expanding disable,1: channel0 format expanding enable" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0: RGB 565,1: RGB 555,2: ARGB 1555,3: RGB 444,4: ARGB 4444,5: YUYV/YVYU,6: UYVY/VYUY,7: YUV422_2P" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 64 bits" group.long 0x524++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH0_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x528++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH0_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline eventfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline eventfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x52C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH0_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x530++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0: channel1 data will do shift function,1: channel1 will bypass shift function" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0: channel1 format expanding disable,1: channel1 format expanding enable" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0: RGB 565,1: RGB 555,2: ARGB 1555,3: RGB 444,4: ARGB 4444,5: YUYV/YVYU,6: UYVY/VYUY,7: YUV422_2P" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 32 bits" group.long 0x534++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH1_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x538++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH1_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline eventfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline eventfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x53C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_CTRL_CH1_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x540++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x544++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH0_SET,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x548++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH0_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" eventfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x54C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH0_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x550++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x554++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH1_SET,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x558++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH1_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" eventfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x55C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_OFFSET_CH1_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x560++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x564++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH0_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x568++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH0_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x56C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH0_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x570++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x574++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH1_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x578++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH1_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x57C++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_SHIFT_WIDTH_CH1_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x580++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ADDR_0_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR0,INPUT_BASE_ADDR0" group.long 0x590++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ADDR_1_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR1,INPUT_BASE_ADDR1" group.long 0x5A0++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ADDR_0_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR0,INPUT_BASE_ADDR0" group.long 0x5B0++0x03 line.long 0x00 "HW_PXP_INPUT_FETCH_ADDR_1_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR1,INPUT_BASE_ADDR1" group.long 0x5C0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH0,Store engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0: Arbitration disable,1: Arbitration enable" newline rbitfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0: combine 2 channel disable,1: combine 2 channel enable" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0: Fill data mode disable,1: Fill data mode enable" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0: select 64 shift out data to pack,1: select low 32 bit shift out data to pack" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0: store memory mode disable,1: store memory mode enable" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0: store bypass mode disable,1: store bypass mode enable" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0: Using 1x1 Array,1: Using 3x3 Array,2: Using 5x5 Array,3: Using 5x5 Array" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0: Array Handshake Disabled,1: Array Handshake Enabled" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the prefetch engine is disabled,1: Handshake with the prefetch engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Store in scan mode,1: Store in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Store function is disable,1: Store function is enable" group.long 0x5C4++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH0_SET,Store engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0,1" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0,1" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x5C8++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH0_CLR,Store engine Control Channel 0 Register" eventfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline eventfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0,1" newline eventfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0,1" newline eventfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline eventfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline eventfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline eventfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x5CC++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH0_TOG,Store engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0,1" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0,1" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x5D0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH1,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0: select 64 shift out data to pack,1: select channel 0 high 32 bit shift out data.." newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0: store memory mode disable,1: store memory mode enable" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0: store bypass mode disable,1: store bypass mode enable" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0: Using 1x1 Array,1: Using 3x3 Array,2: Using 5x5 Array,3: Using 5x5 Array" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0: Array Handshake Disabled,1: Array Handshake Enabled" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the fetch engine is disabled,1: Handshake with the fetch engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Store in scan mode,1: Store in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Store function is disable,1: Store function is enable" group.long 0x5D4++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH1_SET,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x5D8++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH1_CLR,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline eventfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline eventfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline eventfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x5DC++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_CTRL_CH1_TOG,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" rgroup.long 0x5E0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_STATUS_CH0,Store engine status Channel 0 Register" hexmask.long.word 0x00 16.--31. 1. "STORE_BLOCK_Y,STORE_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "STORE_BLOCK_X,STORE_BLOCK_X" rgroup.long 0x5F0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_STATUS_CH1,Store engine status Channel 1 Register" hexmask.long.word 0x00 16.--31. 1. "STORE_BLOCK_Y,STORE_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "STORE_BLOCK_X,STORE_BLOCK_X" repeat 2. (strings "0" "1" )(list 0x00 0x10 ) group.long ($2+0x600)++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SIZE_CH$1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "OUT_HEIGHT,OUT_HEIGHT" newline hexmask.long.word 0x00 0.--15. 1. "OUT_WIDTH,OUT_WIDTH" repeat.end group.long 0x620++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_PITCH,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "CH1_OUT_PITCH,CH1_OUT_PITCH" newline hexmask.long.word 0x00 0.--15. 1. "CH0_OUT_PITCH,CH0_OUT_PITCH" group.long 0x630++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0: data will do shift processing,1: data will bypass shift module" newline rbitfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 64 bits" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x634++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH0_SET,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline rbitfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x638++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH0_CLR,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline eventfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline eventfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline eventfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline eventfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline eventfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x63C++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH0_TOG,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline rbitfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x640++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 32 bits" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x644++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH1_SET,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x648++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH1_CLR,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline eventfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline eventfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline eventfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x64C++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_SHIFT_CTRL_CH1_TOG,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0x690++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_ADDR_0_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR0,OUT_BASE_ADDR0" group.long 0x6A0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_ADDR_1_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR1,OUT_BASE_ADDR1" group.long 0x6B0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_FILL_DATA_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "FILL_DATA_CH0,FILL_DATA_CH0" group.long 0x6C0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_ADDR_0_CH1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR0,OUT_BASE_ADDR0" group.long 0x6D0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_ADDR_1_CH1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR1,OUT_BASE_ADDR1" group.long 0x6E0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK0_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK0_H_CH0,D_MASK0_H_CH0" group.long 0x6F0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK0_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK0_L_CH0,D_MASK0_L_CH0" group.long 0x700++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK1_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK1_H_CH0,D_MASK1_H_CH0" group.long 0x710++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK1_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK1_L_CH0,D_MASK1_L_CH0" group.long 0x720++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK2_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK2_H_CH0,D_MASK2_H_CH0" group.long 0x730++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK2_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK2_L_CH0,D_MASK2_L_CH0" group.long 0x740++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK3_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK3_H_CH0,D_MASK3_H_CH0" group.long 0x750++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK3_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK3_L_CH0,D_MASK3_L_CH0" group.long 0x760++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK4_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK4_H_CH0,D_MASK4_H_CH0" group.long 0x770++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK4_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK4_L_CH0,D_MASK4_L_CH0" group.long 0x780++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK5_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK5_H_CH0,D_MASK5_H_CH0" group.long 0x790++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK5_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK5_L_CH0,D_MASK5_L_CH0" group.long 0x7A0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK6_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK6_H_CH0,D_MASK6_H_CH0" group.long 0x7B0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK6_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK6_L_CH0,D_MASK6_L_CH0" group.long 0x7C0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK7_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK7_H_CH0,D_MASK7_H_CH0" group.long 0x7E0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_MASK7_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK7_L_CH0,D_MASK7_L_CH0" group.long 0x7F0++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_SHIFT_L_CH0,This register defines the control bits for the pxp store_engine sub-block" bitfld.long 0x00 31. "D_SHIFT_FLAG3,D_SHIFT_FLAG3" "0,1" newline rbitfld.long 0x00 30. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 24.--29. "D_SHIFT_WIDTH3,D_SHIFT_WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 23. "D_SHIFT_FLAG2,D_SHIFT_FLAG2" "0,1" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 16.--21. "D_SHIFT_WIDTH2,D_SHIFT_WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "D_SHIFT_FLAG1,D_SHIFT_FLAG1" "0,1" newline rbitfld.long 0x00 14. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 8.--13. "D_SHIFT_WIDTH1,D_SHIFT_WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "D_SHIFT_FLAG0,D_SHIFT_FLAG0" "0,1" newline rbitfld.long 0x00 6. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 0.--5. "D_SHIFT_WIDTH0,D_SHIFT_WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x800++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_D_SHIFT_H_CH0,This register defines the control bits for the pxp store_engine sub-block" bitfld.long 0x00 31. "D_SHIFT_FLAG7,D_SHIFT_FLAG7" "0,1" newline rbitfld.long 0x00 30. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 24.--29. "D_SHIFT_WIDTH7,D_SHIFT_WIDTH7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 23. "D_SHIFT_FLAG6,D_SHIFT_FLAG6" "0,1" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 16.--21. "D_SHIFT_WIDTH6,D_SHIFT_WIDTH6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "D_SHIFT_FLAG5,D_SHIFT_FLAG5" "0,1" newline rbitfld.long 0x00 14. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 8.--13. "D_SHIFT_WIDTH5,D_SHIFT_WIDTH5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "D_SHIFT_FLAG4,D_SHIFT_FLAG4" "0,1" newline rbitfld.long 0x00 6. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 0.--5. "D_SHIFT_WIDTH4,D_SHIFT_WIDTH4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x810++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_F_SHIFT_L_CH0,This register defines the control bits for the pxp store_engine sub-block" rbitfld.long 0x00 31. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 30. "F_SHIFT_FLAG3,F_SHIFT_FLAG3" "0,1" newline bitfld.long 0x00 24.--29. "F_SHIFT_WIDTH3,F_SHIFT_WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 23. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 22. "F_SHIFT_FLAG2,F_SHIFT_FLAG2" "0,1" newline bitfld.long 0x00 16.--21. "F_SHIFT_WIDTH2,F_SHIFT_WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 15. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 14. "F_SHIFT_FLAG1,F_SHIFT_FLAG1" "0,1" newline bitfld.long 0x00 8.--13. "F_SHIFT_WIDTH1,F_SHIFT_WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 6. "F_SHIFT_FLAG0,F_SHIFT_FLAG0" "0,1" newline bitfld.long 0x00 0.--5. "F_SHIFT_WIDTH0,F_SHIFT_WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x820++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_F_SHIFT_H_CH0,This register defines the control bits for the pxp store_engine sub-block" rbitfld.long 0x00 31. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 30. "F_SHIFT_FLAG7,F_SHIFT_FLAG7" "0,1" newline bitfld.long 0x00 24.--29. "F_SHIFT_WIDTH7,F_SHIFT_WIDTH7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 23. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 22. "F_SHIFT_FLAG6,F_SHIFT_FLAG6" "0,1" newline bitfld.long 0x00 16.--21. "F_SHIFT_WIDTH6,F_SHIFT_WIDTH6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 15. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 14. "F_SHIFT_FLAG5,F_SHIFT_FLAG5" "0,1" newline bitfld.long 0x00 8.--13. "F_SHIFT_WIDTH5,F_SHIFT_WIDTH5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 6. "F_SHIFT_FLAG4,F_SHIFT_FLAG4" "0,1" newline bitfld.long 0x00 0.--5. "F_SHIFT_WIDTH4,F_SHIFT_WIDTH4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x830++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_F_MASK_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.byte 0x00 24.--31. 1. "F_MASK3,F_MASK3" newline hexmask.long.byte 0x00 16.--23. 1. "F_MASK2,F_MASK2" newline hexmask.long.byte 0x00 8.--15. 1. "F_MASK1,F_MASK1" newline hexmask.long.byte 0x00 0.--7. 1. "F_MASK0,F_MASK0" group.long 0x840++0x03 line.long 0x00 "HW_PXP_INPUT_STORE_F_MASK_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.byte 0x00 24.--31. 1. "F_MASK7,F_MASK7" newline hexmask.long.byte 0x00 16.--23. 1. "F_MASK6,F_MASK6" newline hexmask.long.byte 0x00 8.--15. 1. "F_MASK5,F_MASK5" newline hexmask.long.byte 0x00 0.--7. 1. "F_MASK4,F_MASK4" group.long 0x850++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH0,Pre-fetch engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0: Arbitration disable,1: Arbitration enable" newline rbitfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0: 1 line,1: 8 lines,2: 16 lines,3: 16 lines" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0: ROT_0,1: ROT_90,2: ROT_180,3: ROT_270" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0: VFLIP disable,1: VFLIP enable" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0: HFLIP disable,1: VFLIP enable" newline rbitfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0: In 64 bit mode the output high byte will use..,1: In 64 bit mode the output high byte will use.." newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0: Channel 0 is from memory,1: Channel 0 is from previous process engine" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the store engine is disabled,1: Handshake with the store engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Prefetch in scan mode,1: Prefetch in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Prefetch function is disable,1: Prefetch function is enable" group.long 0x854++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH0_SET,Pre-fetch engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0,1" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x858++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH0_CLR,Pre-fetch engine Control Channel 0 Register" eventfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline eventfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline eventfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline eventfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline eventfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline eventfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0,1" newline eventfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x85C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH0_TOG,Pre-fetch engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 26.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 6.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. "HIGH_BYTE,HIGH_BYTE" "0,1" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x860++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH1,Pre-fetch engine Control Channel 1 Register" rbitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0: 1 line,1: 8 lines,2: 16 lines,3: 16 lines" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0: ROT_0,1: ROT_90,2: ROT_180,3: ROT_270" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0: VFLIP disable,1: VFLIP enable" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0: HFLIP disable,1: VFLIP enable" newline rbitfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0: Channel 1 is from memory,1: Channel 1 is from previous process engine" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the store engine is disabled,1: Handshake with the store engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Prefetch in scan mode,1: Prefetch in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Prefetch function is disable,1: Prefetch function is enable" group.long 0x864++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH1_SET,Pre-fetch engine Control Channel 1 Register" rbitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x868++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH1_CLR,Pre-fetch engine Control Channel 1 Register" eventfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline eventfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline eventfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline eventfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline eventfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x86C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_CTRL_CH1_TOG,Pre-fetch engine Control Channel 1 Register" rbitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24.--25. "HANDSHAKE_SCAN_LINE_NUM,HANDSHAKE_SCAN_LINE_NUM" "0,1,2,3" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "RD_NUM_BYTES,RD_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 14.--15. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ROTATION_ANGLE,ROTATION_ANGLE" "0,1,2,3" newline rbitfld.long 0x00 11. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 10. "VFLIP,VFLIP" "0,1" newline bitfld.long 0x00 9. "HFLIP,HFLIP" "0,1" newline rbitfld.long 0x00 5.--8. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "BYPASS_PIXEL_EN,BYPASS_PIXEL_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" rgroup.long 0x870++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_STATUS_CH0,Pre-fetch engine status Channel 0 Register" hexmask.long.word 0x00 16.--31. 1. "PREFETCH_BLOCK_Y,PREFETCH_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "PREFETCH_BLOCK_X,PREFETCH_BLOCK_X" rgroup.long 0x880++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_STATUS_CH1,Store engine status Channel 1 Register" hexmask.long.word 0x00 16.--31. 1. "PREFETCH_BLOCK_Y,PREFETCH_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "PREFETCH_BLOCK_X,PREFETCH_BLOCK_X" group.long 0x890++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ACTIVE_SIZE_ULC_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_ULC_Y,ACTIVE_SIZE_ULC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_ULC_X,ACTIVE_SIZE_ULC_X" group.long 0x8A0++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ACTIVE_SIZE_LRC_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_LRC_Y,ACTIVE_SIZE_LRC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_LRC_X,ACTIVE_SIZE_LRC_X" group.long 0x8B0++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ACTIVE_SIZE_ULC_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_ULC_Y,ACTIVE_SIZE_ULC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_ULC_X,ACTIVE_SIZE_ULC_X" group.long 0x8C0++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ACTIVE_SIZE_LRC_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "ACTIVE_SIZE_LRC_Y,ACTIVE_SIZE_LRC_Y" newline hexmask.long.word 0x00 0.--15. 1. "ACTIVE_SIZE_LRC_X,ACTIVE_SIZE_LRC_X" repeat 2. (strings "0" "1" )(list 0x00 0x10 ) group.long ($2+0x8D0)++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SIZE_CH$1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "INPUT_TOTAL_HEIGHT,INPUT_TOTAL_HEIGHT" newline hexmask.long.word 0x00 0.--15. 1. "INPUT_TOTAL_WIDTH,INPUT_TOTAL_WIDTH" repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x10 ) group.long ($2+0x8F0)++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_BACKGROUND_COLOR_CH$1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "BACKGROUND_COLOR,BACKGROUND_COLOR" repeat.end group.long 0x910++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_PITCH,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "CH1_INPUT_PITCH,CH1_INPUT_PITCH" newline hexmask.long.word 0x00 0.--15. 1. "CH0_INPUT_PITCH,CH0_INPUT_PITCH" group.long 0x920++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0: channel0 data will do shift function,1: channel0 will bypass shift function" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0: channel0 format expanding disable,1: channel0 format expanding enable" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0: RGB 565,1: RGB 555,2: ARGB 1555,3: RGB 444,4: ARGB 4444,5: YUYV/YVYU,6: UYVY/VYUY,7: YUV422_2P" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 32 bits" group.long 0x924++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH0_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x928++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH0_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline eventfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline eventfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x92C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH0_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x930++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0: channel1 data will do shift function,1: channel1 will bypass shift function" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0: channel1 format expanding disable,1: channel1 format expanding enable" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0: RGB 565,1: RGB 555,2: ARGB 1555,3: RGB 444,4: ARGB 4444,5: YUYV/YVYU,6: UYVY/VYUY,7: YUV422_2P" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 32 bits" group.long 0x934++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH1_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x938++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH1_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline eventfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline eventfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x93C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_CTRL_CH1_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.tbyte 0x00 13.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline bitfld.long 0x00 11. "EXPAND_EN,EXPAND_EN" "0,1" newline bitfld.long 0x00 8.--10. "EXPAND_FORMAT,EXPAND_FORMAT" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 2.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--1. "INPUT_ACTIVE_BPP,INPUT_ACTIVE_BPP" "0,1,2,3" group.long 0x940++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x944++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH0_SET,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x948++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH0_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" eventfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x94C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH0_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x950++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x954++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH1_SET,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x958++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH1_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" eventfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x95C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_OFFSET_CH1_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "OFFSET3,OFFSET3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 21.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "OFFSET2,OFFSET2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "OFFSET1,OFFSET1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD3,RSVD3" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "OFFSET0,OFFSET0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x960++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x964++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH0_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x968++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH0_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x96C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH0_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x970++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x974++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH1_SET,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x978++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH1_CLR,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x97C++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_SHIFT_WIDTH_CH1_TOG,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 12.--15. "WIDTH3,WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "WIDTH2,WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "WIDTH1,WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "WIDTH0,WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x980++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ADDR_0_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR0,INPUT_BASE_ADDR0" group.long 0x990++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ADDR_1_CH0,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR1,INPUT_BASE_ADDR1" group.long 0x9A0++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ADDR_0_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR0,INPUT_BASE_ADDR0" group.long 0x9B0++0x03 line.long 0x00 "HW_PXP_DITHER_FETCH_ADDR_1_CH1,This register defines the control bits for the pxp prefetch_engine sub-block" hexmask.long 0x00 0.--31. 1. "INPUT_BASE_ADDR1,INPUT_BASE_ADDR1" group.long 0x9C0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH0,Store engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0: Arbitration disable,1: Arbitration enable" newline rbitfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0: combine 2 channel disable,1: combine 2 channel enable" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0: Fill data mode disable,1: Fill data mode enable" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0: select 64 shift out data to pack,1: select low 32 bit shift out data to pack" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0: store memory mode disable,1: store memory mode enable" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0: store bypass mode disable,1: store bypass mode enable" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0: Using 1x1 Array,1: Using 3x3 Array,2: Using 5x5 Array,3: Using 5x5 Array" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0: Array Handshake Disabled,1: Array Handshake Enabled" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the prefetch engine is disabled,1: Handshake with the prefetch engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Store in scan mode,1: Store in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Store function is disable,1: Store function is enable" group.long 0x9C4++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH0_SET,Store engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0,1" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0,1" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x9C8++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH0_CLR,Store engine Control Channel 0 Register" eventfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline eventfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0,1" newline eventfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0,1" newline eventfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline eventfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline eventfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline eventfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x9CC++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH0_TOG,Store engine Control Channel 0 Register" bitfld.long 0x00 31. "ARBIT_EN,ARBIT_EN" "0,1" newline rbitfld.long 0x00 25.--30. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 24. "COMBINE_2CHANNEL,COMBINE_2CHANNEL" "0,1" newline rbitfld.long 0x00 18.--23. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 12.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 11. "FILL_DATA_EN,FILL_DATA_EN" "0,1" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x9D0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH1,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0: NUM_8_BYTES,1: NUM_16_BYTES,2: NUM_32_BYTES,3: NUM_64_BYTES" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0: select 64 shift out data to pack,1: select channel 0 high 32 bit shift out data.." newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0: store memory mode disable,1: store memory mode enable" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0: store bypass mode disable,1: store bypass mode enable" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0: Using 1x1 Array,1: Using 3x3 Array,2: Using 5x5 Array,3: Using 5x5 Array" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0: Array Handshake Disabled,1: Array Handshake Enabled" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0: Handshake with the fetch engine is disabled,1: Handshake with the fetch engine is enabled" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0: BLK_SIZE_8x8,1: BLK_SIZE_16x16" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0: Store in scan mode,1: Store in block mode" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0: Store function is disable,1: Store function is enable" group.long 0x9D4++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH1_SET,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x9D8++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH1_CLR,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline eventfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline eventfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline eventfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline eventfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline eventfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline eventfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline eventfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline eventfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline eventfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline eventfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline eventfld.long 0x00 0. "CH_EN,CH_EN" "0,1" group.long 0x9DC++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_CTRL_CH1_TOG,Store engine Control Channel 1 Register" hexmask.long.word 0x00 18.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 16.--17. "WR_NUM_BYTES,WR_NUM_BYTES" "0,1,2,3" newline rbitfld.long 0x00 11.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 10. "PACK_IN_SEL,PACK_IN_SEL" "0,1" newline bitfld.long 0x00 9. "STORE_MEMORY_EN,STORE_MEMORY_EN" "0,1" newline bitfld.long 0x00 8. "STORE_BYPASS_EN,STORE_BYPASS_EN" "0,1" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 5.--6. "ARRAY_LINE_NUM,ARRAY_LINE_NUM" "0,1,2,3" newline bitfld.long 0x00 4. "ARRAY_EN,ARRAY_EN" "0,1" newline bitfld.long 0x00 3. "HANDSHAKE_EN,HANDSHAKE_EN" "0,1" newline bitfld.long 0x00 2. "BLOCK_16,BLOCK_16" "0,1" newline bitfld.long 0x00 1. "BLOCK_EN,BLOCK_EN" "0,1" newline bitfld.long 0x00 0. "CH_EN,CH_EN" "0,1" rgroup.long 0x9E0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_STATUS_CH0,Store engine status Channel 0 Register" hexmask.long.word 0x00 16.--31. 1. "STORE_BLOCK_Y,STORE_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "STORE_BLOCK_X,STORE_BLOCK_X" rgroup.long 0x9F0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_STATUS_CH1,Store engine status Channel 1 Register" hexmask.long.word 0x00 16.--31. 1. "STORE_BLOCK_Y,STORE_BLOCK_Y" newline hexmask.long.word 0x00 0.--15. 1. "STORE_BLOCK_X,STORE_BLOCK_X" repeat 2. (strings "0" "1" )(list 0x00 0x10 ) group.long ($2+0xA00)++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SIZE_CH$1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "OUT_HEIGHT,OUT_HEIGHT" newline hexmask.long.word 0x00 0.--15. 1. "OUT_WIDTH,OUT_WIDTH" repeat.end group.long 0xA20++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_PITCH,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.word 0x00 16.--31. 1. "CH1_OUT_PITCH,CH1_OUT_PITCH" newline hexmask.long.word 0x00 0.--15. 1. "CH0_OUT_PITCH,CH0_OUT_PITCH" group.long 0xA30++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0: data will do shift processing,1: data will bypass shift module" newline rbitfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 32 bits" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA34++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH0_SET,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline rbitfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA38++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH0_CLR,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline eventfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline eventfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline eventfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline eventfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline eventfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA3C++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH0_TOG,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.tbyte 0x00 8.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 7. "SHIFT_BYPASS,SHIFT_BYPASS" "0,1" newline rbitfld.long 0x00 6. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA40++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0: YUYV422 2 plane disabled,1: YUYV422 2 plane enabled" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0: 8 bits,1: 16 bits,2: 32 bits,3: 32 bits" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA44++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH1_SET,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA48++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH1_CLR,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline eventfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline eventfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline eventfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA4C++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_SHIFT_CTRL_CH1_TOG,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 6.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 5. "OUT_YUV422_2P_EN,OUT_YUV422_2P_EN" "0,1" newline bitfld.long 0x00 4. "OUT_YUV422_1P_EN,OUT_YUV422_1P_EN" "0,1" newline bitfld.long 0x00 2.--3. "OUTPUT_ACTIVE_BPP,OUTPUT_ACTIVE_BPP" "0,1,2,3" newline rbitfld.long 0x00 0.--1. "RSVD2,RSVD2" "0,1,2,3" group.long 0xA90++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_ADDR_0_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR0,OUT_BASE_ADDR0" group.long 0xAA0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_ADDR_1_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR1,OUT_BASE_ADDR1" group.long 0xAB0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_FILL_DATA_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "FILL_DATA_CH0,FILL_DATA_CH0" group.long 0xAC0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_ADDR_0_CH1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR0,OUT_BASE_ADDR0" group.long 0xAD0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_ADDR_1_CH1,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "OUT_BASE_ADDR1,OUT_BASE_ADDR1" group.long 0xAE0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK0_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK0_H_CH0,D_MASK0_H_CH0" group.long 0xAF0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK0_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK0_L_CH0,D_MASK0_L_CH0" group.long 0xB00++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK1_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK1_H_CH0,D_MASK1_H_CH0" group.long 0xB10++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK1_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK1_L_CH0,D_MASK1_L_CH0" group.long 0xB20++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK2_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK2_H_CH0,D_MASK2_H_CH0" group.long 0xB30++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK2_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK2_L_CH0,D_MASK2_L_CH0" group.long 0xB40++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK3_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK3_H_CH0,D_MASK3_H_CH0" group.long 0xB50++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK3_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK3_L_CH0,D_MASK3_L_CH0" group.long 0xB60++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK4_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK4_H_CH0,D_MASK4_H_CH0" group.long 0xB70++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK4_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK4_L_CH0,D_MASK4_L_CH0" group.long 0xB80++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK5_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK5_H_CH0,D_MASK5_H_CH0" group.long 0xB90++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK5_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK5_L_CH0,D_MASK5_L_CH0" group.long 0xBA0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK6_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK6_H_CH0,D_MASK6_H_CH0" group.long 0xBB0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK6_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK6_L_CH0,D_MASK6_L_CH0" group.long 0xBC0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK7_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK7_H_CH0,D_MASK7_H_CH0" group.long 0xBD0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_MASK7_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long 0x00 0.--31. 1. "D_MASK7_L_CH0,D_MASK7_L_CH0" group.long 0xBE0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_SHIFT_L_CH0,This register defines the control bits for the pxp store_engine sub-block" bitfld.long 0x00 31. "D_SHIFT_FLAG3,D_SHIFT_FLAG3" "0,1" newline rbitfld.long 0x00 30. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 24.--29. "D_SHIFT_WIDTH3,D_SHIFT_WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 23. "D_SHIFT_FLAG2,D_SHIFT_FLAG2" "0,1" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 16.--21. "D_SHIFT_WIDTH2,D_SHIFT_WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "D_SHIFT_FLAG1,D_SHIFT_FLAG1" "0,1" newline rbitfld.long 0x00 14. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 8.--13. "D_SHIFT_WIDTH1,D_SHIFT_WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "D_SHIFT_FLAG0,D_SHIFT_FLAG0" "0,1" newline rbitfld.long 0x00 6. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 0.--5. "D_SHIFT_WIDTH0,D_SHIFT_WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xBF0++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_D_SHIFT_H_CH0,This register defines the control bits for the pxp store_engine sub-block" bitfld.long 0x00 31. "D_SHIFT_FLAG7,D_SHIFT_FLAG7" "0,1" newline rbitfld.long 0x00 30. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 24.--29. "D_SHIFT_WIDTH7,D_SHIFT_WIDTH7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 23. "D_SHIFT_FLAG6,D_SHIFT_FLAG6" "0,1" newline rbitfld.long 0x00 22. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 16.--21. "D_SHIFT_WIDTH6,D_SHIFT_WIDTH6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "D_SHIFT_FLAG5,D_SHIFT_FLAG5" "0,1" newline rbitfld.long 0x00 14. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 8.--13. "D_SHIFT_WIDTH5,D_SHIFT_WIDTH5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 7. "D_SHIFT_FLAG4,D_SHIFT_FLAG4" "0,1" newline rbitfld.long 0x00 6. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 0.--5. "D_SHIFT_WIDTH4,D_SHIFT_WIDTH4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC00++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_F_SHIFT_L_CH0,This register defines the control bits for the pxp store_engine sub-block" rbitfld.long 0x00 31. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 30. "F_SHIFT_FLAG3,F_SHIFT_FLAG3" "0,1" newline bitfld.long 0x00 24.--29. "F_SHIFT_WIDTH3,F_SHIFT_WIDTH3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 23. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 22. "F_SHIFT_FLAG2,F_SHIFT_FLAG2" "0,1" newline bitfld.long 0x00 16.--21. "F_SHIFT_WIDTH2,F_SHIFT_WIDTH2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 15. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 14. "F_SHIFT_FLAG1,F_SHIFT_FLAG1" "0,1" newline bitfld.long 0x00 8.--13. "F_SHIFT_WIDTH1,F_SHIFT_WIDTH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 6. "F_SHIFT_FLAG0,F_SHIFT_FLAG0" "0,1" newline bitfld.long 0x00 0.--5. "F_SHIFT_WIDTH0,F_SHIFT_WIDTH0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC10++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_F_SHIFT_H_CH0,This register defines the control bits for the pxp store_engine sub-block" rbitfld.long 0x00 31. "RSVD0,RSVD0" "0,1" newline bitfld.long 0x00 30. "F_SHIFT_FLAG7,F_SHIFT_FLAG7" "0,1" newline bitfld.long 0x00 24.--29. "F_SHIFT_WIDTH7,F_SHIFT_WIDTH7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 23. "RSVD1,RSVD1" "0,1" newline bitfld.long 0x00 22. "F_SHIFT_FLAG6,F_SHIFT_FLAG6" "0,1" newline bitfld.long 0x00 16.--21. "F_SHIFT_WIDTH6,F_SHIFT_WIDTH6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 15. "RSVD2,RSVD2" "0,1" newline bitfld.long 0x00 14. "F_SHIFT_FLAG5,F_SHIFT_FLAG5" "0,1" newline bitfld.long 0x00 8.--13. "F_SHIFT_WIDTH5,F_SHIFT_WIDTH5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 7. "RSVD3,RSVD3" "0,1" newline bitfld.long 0x00 6. "F_SHIFT_FLAG4,F_SHIFT_FLAG4" "0,1" newline bitfld.long 0x00 0.--5. "F_SHIFT_WIDTH4,F_SHIFT_WIDTH4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC20++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_F_MASK_L_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.byte 0x00 24.--31. 1. "F_MASK3,F_MASK3" newline hexmask.long.byte 0x00 16.--23. 1. "F_MASK2,F_MASK2" newline hexmask.long.byte 0x00 8.--15. 1. "F_MASK1,F_MASK1" newline hexmask.long.byte 0x00 0.--7. 1. "F_MASK0,F_MASK0" group.long 0xC30++0x03 line.long 0x00 "HW_PXP_DITHER_STORE_F_MASK_H_CH0,This register defines the control bits for the pxp store_engine sub-block" hexmask.long.byte 0x00 24.--31. 1. "F_MASK7,F_MASK7" newline hexmask.long.byte 0x00 16.--23. 1. "F_MASK6,F_MASK6" newline hexmask.long.byte 0x00 8.--15. 1. "F_MASK5,F_MASK5" newline hexmask.long.byte 0x00 0.--7. 1. "F_MASK4,F_MASK4" group.long 0x1670++0x03 line.long 0x00 "HW_PXP_DITHER_CTRL,Dither Control Register 0" rbitfld.long 0x00 31. "BUSY0,BUSY0" "0,1" newline rbitfld.long 0x00 30. "BUSY1,BUSY1" "0,1" newline rbitfld.long 0x00 29. "BUSY2,BUSY2" "0,1" newline rbitfld.long 0x00 25.--28. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ORDERED_ROUND_MODE,ORDERED_ROUND_MODE" "0: Use truncation method,1: Use rounding method" newline bitfld.long 0x00 23. "FINAL_LUT_ENABLE,FINAL_LUT_ENABLE" "0: Disabled,1: Enabled" newline bitfld.long 0x00 21.--22. "IDX_MATRIX2_SIZE,IDX_MATRIX2_SIZE" "0: ZERO,1: ONE,2: 16x16,3: Input value of index" newline bitfld.long 0x00 19.--20. "IDX_MATRIX1_SIZE,IDX_MATRIX1_SIZE" "0: ZERO,1: ONE,2: 16x16,3: Input value of index" newline bitfld.long 0x00 17.--18. "IDX_MATRIX0_SIZE,IDX_MATRIX0_SIZE" "0: ZERO,1: ONE,2: 16x16,3: Input value of index" newline bitfld.long 0x00 15.--16. "LUT_MODE,LUT_MODE" "0: LUT mode off,1: Use LUT at pre-diter stage,2: Use LUT at post-dither stage,?..." newline bitfld.long 0x00 12.--14. "NUM_QUANT_BIT,NUM_QUANT_BIT" "?,1: Quantize down to 1 bit,2: Quantize down to 2 bits,3: Quantize down to 3 bits,4: Quantize down to 4 bits,5: Quantize down to 5 bits,6: Quantize down to 6 bits,7: Quantize down to 7 bits" newline bitfld.long 0x00 9.--11. "DITHER_MODE2,DITHER_MODE2" "0: Pass through,?,?,3: Ordered,4: No Dithering quantization only,?..." newline bitfld.long 0x00 6.--8. "DITHER_MODE1,DITHER_MODE1" "0: Pass through,?,?,3: Ordered,4: No Dithering quantization only,?..." newline bitfld.long 0x00 3.--5. "DITHER_MODE0,DITHER_MODE0" "0: Pass through,1: Floyd-Steinberg,2: Atkinson,3: Ordered,4: No Dithering quantization only,5: Sierra,?..." newline bitfld.long 0x00 2. "ENABLE2,ENABLE2" "0: Disabled,1: Enabled" newline bitfld.long 0x00 1. "ENABLE1,ENABLE1" "0: Disabled,1: Enabled" newline bitfld.long 0x00 0. "ENABLE0,ENABLE0" "0: Disabled,1: Enabled" group.long 0x1674++0x03 line.long 0x00 "HW_PXP_DITHER_CTRL_SET,Dither Control Register 0" rbitfld.long 0x00 31. "BUSY0,BUSY0" "0,1" newline rbitfld.long 0x00 30. "BUSY1,BUSY1" "0,1" newline rbitfld.long 0x00 29. "BUSY2,BUSY2" "0,1" newline rbitfld.long 0x00 25.--28. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ORDERED_ROUND_MODE,ORDERED_ROUND_MODE" "0,1" newline bitfld.long 0x00 23. "FINAL_LUT_ENABLE,FINAL_LUT_ENABLE" "0,1" newline bitfld.long 0x00 21.--22. "IDX_MATRIX2_SIZE,IDX_MATRIX2_SIZE" "0,1,2,3" newline bitfld.long 0x00 19.--20. "IDX_MATRIX1_SIZE,IDX_MATRIX1_SIZE" "0,1,2,3" newline bitfld.long 0x00 17.--18. "IDX_MATRIX0_SIZE,IDX_MATRIX0_SIZE" "0,1,2,3" newline bitfld.long 0x00 15.--16. "LUT_MODE,LUT_MODE" "0,1,2,3" newline bitfld.long 0x00 12.--14. "NUM_QUANT_BIT,NUM_QUANT_BIT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 9.--11. "DITHER_MODE2,DITHER_MODE2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "DITHER_MODE1,DITHER_MODE1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3.--5. "DITHER_MODE0,DITHER_MODE0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 2. "ENABLE2,ENABLE2" "0,1" newline bitfld.long 0x00 1. "ENABLE1,ENABLE1" "0,1" newline bitfld.long 0x00 0. "ENABLE0,ENABLE0" "0,1" group.long 0x1678++0x03 line.long 0x00 "HW_PXP_DITHER_CTRL_CLR,Dither Control Register 0" eventfld.long 0x00 31. "BUSY0,BUSY0" "0,1" newline eventfld.long 0x00 30. "BUSY1,BUSY1" "0,1" newline eventfld.long 0x00 29. "BUSY2,BUSY2" "0,1" newline eventfld.long 0x00 25.--28. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 24. "ORDERED_ROUND_MODE,ORDERED_ROUND_MODE" "0,1" newline eventfld.long 0x00 23. "FINAL_LUT_ENABLE,FINAL_LUT_ENABLE" "0,1" newline eventfld.long 0x00 21.--22. "IDX_MATRIX2_SIZE,IDX_MATRIX2_SIZE" "0,1,2,3" newline eventfld.long 0x00 19.--20. "IDX_MATRIX1_SIZE,IDX_MATRIX1_SIZE" "0,1,2,3" newline eventfld.long 0x00 17.--18. "IDX_MATRIX0_SIZE,IDX_MATRIX0_SIZE" "0,1,2,3" newline eventfld.long 0x00 15.--16. "LUT_MODE,LUT_MODE" "0,1,2,3" newline eventfld.long 0x00 12.--14. "NUM_QUANT_BIT,NUM_QUANT_BIT" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 9.--11. "DITHER_MODE2,DITHER_MODE2" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 6.--8. "DITHER_MODE1,DITHER_MODE1" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 3.--5. "DITHER_MODE0,DITHER_MODE0" "0,1,2,3,4,5,6,7" newline eventfld.long 0x00 2. "ENABLE2,ENABLE2" "0,1" newline eventfld.long 0x00 1. "ENABLE1,ENABLE1" "0,1" newline eventfld.long 0x00 0. "ENABLE0,ENABLE0" "0,1" group.long 0x167C++0x03 line.long 0x00 "HW_PXP_DITHER_CTRL_TOG,Dither Control Register 0" rbitfld.long 0x00 31. "BUSY0,BUSY0" "0,1" newline rbitfld.long 0x00 30. "BUSY1,BUSY1" "0,1" newline rbitfld.long 0x00 29. "BUSY2,BUSY2" "0,1" newline rbitfld.long 0x00 25.--28. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24. "ORDERED_ROUND_MODE,ORDERED_ROUND_MODE" "0,1" newline bitfld.long 0x00 23. "FINAL_LUT_ENABLE,FINAL_LUT_ENABLE" "0,1" newline bitfld.long 0x00 21.--22. "IDX_MATRIX2_SIZE,IDX_MATRIX2_SIZE" "0,1,2,3" newline bitfld.long 0x00 19.--20. "IDX_MATRIX1_SIZE,IDX_MATRIX1_SIZE" "0,1,2,3" newline bitfld.long 0x00 17.--18. "IDX_MATRIX0_SIZE,IDX_MATRIX0_SIZE" "0,1,2,3" newline bitfld.long 0x00 15.--16. "LUT_MODE,LUT_MODE" "0,1,2,3" newline bitfld.long 0x00 12.--14. "NUM_QUANT_BIT,NUM_QUANT_BIT" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 9.--11. "DITHER_MODE2,DITHER_MODE2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "DITHER_MODE1,DITHER_MODE1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3.--5. "DITHER_MODE0,DITHER_MODE0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 2. "ENABLE2,ENABLE2" "0,1" newline bitfld.long 0x00 1. "ENABLE1,ENABLE1" "0,1" newline bitfld.long 0x00 0. "ENABLE0,ENABLE0" "0,1" group.long 0x1680++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA0,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA3,DATA3" newline hexmask.long.byte 0x00 16.--23. 1. "DATA2,DATA2" newline hexmask.long.byte 0x00 8.--15. 1. "DATA1,DATA1" newline hexmask.long.byte 0x00 0.--7. 1. "DATA0,DATA0" group.long 0x1684++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA0_SET,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA3,DATA3" newline hexmask.long.byte 0x00 16.--23. 1. "DATA2,DATA2" newline hexmask.long.byte 0x00 8.--15. 1. "DATA1,DATA1" newline hexmask.long.byte 0x00 0.--7. 1. "DATA0,DATA0" group.long 0x1688++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA0_CLR,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA3,DATA3" newline hexmask.long.byte 0x00 16.--23. 1. "DATA2,DATA2" newline hexmask.long.byte 0x00 8.--15. 1. "DATA1,DATA1" newline hexmask.long.byte 0x00 0.--7. 1. "DATA0,DATA0" group.long 0x168C++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA0_TOG,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA3,DATA3" newline hexmask.long.byte 0x00 16.--23. 1. "DATA2,DATA2" newline hexmask.long.byte 0x00 8.--15. 1. "DATA1,DATA1" newline hexmask.long.byte 0x00 0.--7. 1. "DATA0,DATA0" group.long 0x1690++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA1,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA7,DATA7" newline hexmask.long.byte 0x00 16.--23. 1. "DATA6,DATA6" newline hexmask.long.byte 0x00 8.--15. 1. "DATA5,DATA5" newline hexmask.long.byte 0x00 0.--7. 1. "DATA4,DATA4" group.long 0x1694++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA1_SET,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA7,DATA7" newline hexmask.long.byte 0x00 16.--23. 1. "DATA6,DATA6" newline hexmask.long.byte 0x00 8.--15. 1. "DATA5,DATA5" newline hexmask.long.byte 0x00 0.--7. 1. "DATA4,DATA4" group.long 0x1698++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA1_CLR,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA7,DATA7" newline hexmask.long.byte 0x00 16.--23. 1. "DATA6,DATA6" newline hexmask.long.byte 0x00 8.--15. 1. "DATA5,DATA5" newline hexmask.long.byte 0x00 0.--7. 1. "DATA4,DATA4" group.long 0x169C++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA1_TOG,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA7,DATA7" newline hexmask.long.byte 0x00 16.--23. 1. "DATA6,DATA6" newline hexmask.long.byte 0x00 8.--15. 1. "DATA5,DATA5" newline hexmask.long.byte 0x00 0.--7. 1. "DATA4,DATA4" group.long 0x16A0++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA2,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA11,DATA11" newline hexmask.long.byte 0x00 16.--23. 1. "DATA10,DATA10" newline hexmask.long.byte 0x00 8.--15. 1. "DATA9,DATA9" newline hexmask.long.byte 0x00 0.--7. 1. "DATA8,DATA8" group.long 0x16A4++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA2_SET,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA11,DATA11" newline hexmask.long.byte 0x00 16.--23. 1. "DATA10,DATA10" newline hexmask.long.byte 0x00 8.--15. 1. "DATA9,DATA9" newline hexmask.long.byte 0x00 0.--7. 1. "DATA8,DATA8" group.long 0x16A8++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA2_CLR,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA11,DATA11" newline hexmask.long.byte 0x00 16.--23. 1. "DATA10,DATA10" newline hexmask.long.byte 0x00 8.--15. 1. "DATA9,DATA9" newline hexmask.long.byte 0x00 0.--7. 1. "DATA8,DATA8" group.long 0x16AC++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA2_TOG,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA11,DATA11" newline hexmask.long.byte 0x00 16.--23. 1. "DATA10,DATA10" newline hexmask.long.byte 0x00 8.--15. 1. "DATA9,DATA9" newline hexmask.long.byte 0x00 0.--7. 1. "DATA8,DATA8" group.long 0x16B0++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA3,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA15,DATA15" newline hexmask.long.byte 0x00 16.--23. 1. "DATA14,DATA14" newline hexmask.long.byte 0x00 8.--15. 1. "DATA13,DATA13" newline hexmask.long.byte 0x00 0.--7. 1. "DATA12,DATA12" group.long 0x16B4++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA3_SET,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA15,DATA15" newline hexmask.long.byte 0x00 16.--23. 1. "DATA14,DATA14" newline hexmask.long.byte 0x00 8.--15. 1. "DATA13,DATA13" newline hexmask.long.byte 0x00 0.--7. 1. "DATA12,DATA12" group.long 0x16B8++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA3_CLR,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA15,DATA15" newline hexmask.long.byte 0x00 16.--23. 1. "DATA14,DATA14" newline hexmask.long.byte 0x00 8.--15. 1. "DATA13,DATA13" newline hexmask.long.byte 0x00 0.--7. 1. "DATA12,DATA12" group.long 0x16BC++0x03 line.long 0x00 "HW_PXP_DITHER_FINAL_LUT_DATA3_TOG,Final stage lookup value Register" hexmask.long.byte 0x00 24.--31. 1. "DATA15,DATA15" newline hexmask.long.byte 0x00 16.--23. 1. "DATA14,DATA14" newline hexmask.long.byte 0x00 8.--15. 1. "DATA13,DATA13" newline hexmask.long.byte 0x00 0.--7. 1. "DATA12,DATA12" group.long 0x2A00++0x03 line.long 0x00 "HW_PXP_HIST_A_CTRL,Histogram Control Register" rbitfld.long 0x00 27.--31. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--26. "PIXEL_WIDTH,PIXEL_WIDTH" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 23. "RSVD3,RSVD3" "0,1" newline hexmask.long.byte 0x00 16.--22. 1. "PIXEL_OFFSET,PIXEL_OFFSET" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 8.--12. "STATUS,STATUS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 4. "CLEAR,CLEAR" "0,1" newline rbitfld.long 0x00 1.--3. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x2A10++0x03 line.long 0x00 "HW_PXP_HIST_A_MASK,Histogram Pixel Mask Register" hexmask.long.byte 0x00 24.--31. 1. "MASK_VALUE1,MASK_VALUE1" newline hexmask.long.byte 0x00 16.--23. 1. "MASK_VALUE0,MASK_VALUE0" newline bitfld.long 0x00 13.--15. "MASK_WIDTH,MASK_WIDTH" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 6.--12. 1. "MASK_OFFSET,MASK_OFFSET" newline bitfld.long 0x00 4.--5. "MASK_MODE,MASK_MODE" "0: EQUAL,1: NOT_EQUAL,2: INSIDE,3: OUTSIDE" newline rbitfld.long 0x00 1.--3. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "MASK_EN,MASK_EN" "0,1" group.long 0x2A20++0x03 line.long 0x00 "HW_PXP_HIST_A_BUF_SIZE,Histogram Pixel Buffer Size Register" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "HEIGHT,HEIGHT" newline rbitfld.long 0x00 13.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "WIDTH,WIDTH" rgroup.long 0x2A30++0x03 line.long 0x00 "HW_PXP_HIST_A_TOTAL_PIXEL,Total Number of Pixels Used by Histogram Engine" bitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long 0x00 0.--25. 1. "TOTAL_PIXEL,TOTAL_PIXEL" rgroup.long 0x2A40++0x03 line.long 0x00 "HW_PXP_HIST_A_ACTIVE_AREA_X,The X Coordinate Offset for Active Area" bitfld.long 0x00 29.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "MAX_X_OFFSET,MAX_X_OFFSET" newline bitfld.long 0x00 13.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "MIN_X_OFFSET,MIN_X_OFFSET" rgroup.long 0x2A50++0x03 line.long 0x00 "HW_PXP_HIST_A_ACTIVE_AREA_Y,The Y Coordinate Offset for Active Area" bitfld.long 0x00 29.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "MAX_Y_OFFSET,MAX_Y_OFFSET" newline bitfld.long 0x00 13.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "MIN_Y_OFFSET,MIN_Y_OFFSET" rgroup.long 0x2A60++0x03 line.long 0x00 "HW_PXP_HIST_A_RAW_STAT0,Histogram Result Based on RAW Pixel Value" hexmask.long 0x00 0.--31. 1. "STAT0,STAT0" rgroup.long 0x2A70++0x03 line.long 0x00 "HW_PXP_HIST_A_RAW_STAT1,Histogram Result Based on RAW Pixel Value" hexmask.long 0x00 0.--31. 1. "STAT1,STAT1" group.long 0x2A80++0x03 line.long 0x00 "HW_PXP_HIST_B_CTRL,Histogram Control Register" rbitfld.long 0x00 27.--31. "RSVD4,RSVD4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 24.--26. "PIXEL_WIDTH,PIXEL_WIDTH" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 23. "RSVD3,RSVD3" "0,1" newline hexmask.long.byte 0x00 16.--22. 1. "PIXEL_OFFSET,PIXEL_OFFSET" newline rbitfld.long 0x00 13.--15. "RSVD2,RSVD2" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 8.--12. "STATUS,STATUS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline rbitfld.long 0x00 5.--7. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 4. "CLEAR,CLEAR" "0,1" newline rbitfld.long 0x00 1.--3. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "ENABLE,ENABLE" "0,1" group.long 0x2A90++0x03 line.long 0x00 "HW_PXP_HIST_B_MASK,Histogram Pixel Mask Register" hexmask.long.byte 0x00 24.--31. 1. "MASK_VALUE1,MASK_VALUE1" newline hexmask.long.byte 0x00 16.--23. 1. "MASK_VALUE0,MASK_VALUE0" newline bitfld.long 0x00 13.--15. "MASK_WIDTH,MASK_WIDTH" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 6.--12. 1. "MASK_OFFSET,MASK_OFFSET" newline bitfld.long 0x00 4.--5. "MASK_MODE,MASK_MODE" "0: EQUAL,1: NOT_EQUAL,2: INSIDE,3: OUTSIDE" newline rbitfld.long 0x00 1.--3. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "MASK_EN,MASK_EN" "0,1" group.long 0x2AA0++0x03 line.long 0x00 "HW_PXP_HIST_B_BUF_SIZE,Histogram Pixel Buffer Size Register" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "HEIGHT,HEIGHT" newline rbitfld.long 0x00 13.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "WIDTH,WIDTH" rgroup.long 0x2AB0++0x03 line.long 0x00 "HW_PXP_HIST_B_TOTAL_PIXEL,Total Number of Pixels Used by Histogram Engine" bitfld.long 0x00 26.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long 0x00 0.--25. 1. "TOTAL_PIXEL,TOTAL_PIXEL" rgroup.long 0x2AC0++0x03 line.long 0x00 "HW_PXP_HIST_B_ACTIVE_AREA_X,The X Coordinate Offset for Active Area" bitfld.long 0x00 29.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "MAX_X_OFFSET,MAX_X_OFFSET" newline bitfld.long 0x00 13.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "MIN_X_OFFSET,MIN_X_OFFSET" rgroup.long 0x2AD0++0x03 line.long 0x00 "HW_PXP_HIST_B_ACTIVE_AREA_Y,The Y Coordinate Offset for Active Area" bitfld.long 0x00 29.--31. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "MAX_Y_OFFSET,MAX_Y_OFFSET" newline bitfld.long 0x00 13.--15. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "MIN_Y_OFFSET,MIN_Y_OFFSET" rgroup.long 0x2AE0++0x03 line.long 0x00 "HW_PXP_HIST_B_RAW_STAT0,Histogram Result Based on RAW Pixel Value" hexmask.long 0x00 0.--31. 1. "STAT0,STAT0" rgroup.long 0x2AF0++0x03 line.long 0x00 "HW_PXP_HIST_B_RAW_STAT1,Histogram Result Based on RAW Pixel Value" hexmask.long 0x00 0.--31. 1. "STAT1,STAT1" group.long 0x2B00++0x03 line.long 0x00 "HW_PXP_HIST2_PARAM,2-level Histogram Parameter Register" hexmask.long.word 0x00 16.--31. 1. "RSVD,RSVD" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE1,VALUE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE0,VALUE0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B10++0x03 line.long 0x00 "HW_PXP_HIST4_PARAM,4-level Histogram Parameter Register" rbitfld.long 0x00 30.--31. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE3,VALUE3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE2,VALUE2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE1,VALUE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE0,VALUE0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B20++0x03 line.long 0x00 "HW_PXP_HIST8_PARAM0,8-level Histogram Parameter 0 Register" rbitfld.long 0x00 30.--31. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE3,VALUE3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE2,VALUE2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE1,VALUE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE0,VALUE0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B30++0x03 line.long 0x00 "HW_PXP_HIST8_PARAM1,8-level Histogram Parameter 1 Register" rbitfld.long 0x00 30.--31. "RSVD7,RSVD7" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE7,VALUE7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD6,RSVD6" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE6,VALUE6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD5,RSVD5" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE5,VALUE5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD4,RSVD4" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE4,VALUE4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B40++0x03 line.long 0x00 "HW_PXP_HIST16_PARAM0,16-level Histogram Parameter 0 Register" rbitfld.long 0x00 30.--31. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE3,VALUE3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE2,VALUE2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE1,VALUE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE0,VALUE0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B50++0x03 line.long 0x00 "HW_PXP_HIST16_PARAM1,16-level Histogram Parameter 1 Register" rbitfld.long 0x00 30.--31. "RSVD7,RSVD7" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE7,VALUE7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD6,RSVD6" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE6,VALUE6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD5,RSVD5" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE5,VALUE5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD4,RSVD4" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE4,VALUE4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B60++0x03 line.long 0x00 "HW_PXP_HIST16_PARAM2,16-level Histogram Parameter 2 Register" rbitfld.long 0x00 30.--31. "RSVD11,RSVD11" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE11,VALUE11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD10,RSVD10" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE10,VALUE10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD9,RSVD9" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE9,VALUE9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD8,RSVD8" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE8,VALUE8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B70++0x03 line.long 0x00 "HW_PXP_HIST16_PARAM3,16-level Histogram Parameter 3 Register" rbitfld.long 0x00 30.--31. "RSVD15,RSVD15" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE15,VALUE15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD14,RSVD14" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE14,VALUE14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD13,RSVD13" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE13,VALUE13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD12,RSVD12" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE12,VALUE12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B80++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM0,32-level Histogram Parameter 0 Register" rbitfld.long 0x00 30.--31. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE3,VALUE3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE2,VALUE2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE1,VALUE1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE0,VALUE0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B90++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM1,32-level Histogram Parameter 1 Register" rbitfld.long 0x00 30.--31. "RSVD7,RSVD7" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE7,VALUE7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD6,RSVD6" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE6,VALUE6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD5,RSVD5" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE5,VALUE5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD4,RSVD4" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE4,VALUE4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2BA0++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM2,32-level Histogram Parameter 2 Register" rbitfld.long 0x00 30.--31. "RSVD11,RSVD11" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE11,VALUE11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD10,RSVD10" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE10,VALUE10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD9,RSVD9" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE9,VALUE9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD8,RSVD8" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE8,VALUE8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2BB0++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM3,32-level Histogram Parameter 3 Register" rbitfld.long 0x00 30.--31. "RSVD15,RSVD15" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE15,VALUE15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD14,RSVD14" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE14,VALUE14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD13,RSVD13" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE13,VALUE13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD12,RSVD12" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE12,VALUE12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2BC0++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM4,32-level Histogram Parameter 0 Register" rbitfld.long 0x00 30.--31. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE19,VALUE19" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE18,VALUE18" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD1,RSVD1" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE17,VALUE17" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD0,RSVD0" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE16,VALUE16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2BD0++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM5,32-level Histogram Parameter 1 Register" rbitfld.long 0x00 30.--31. "RSVD7,RSVD7" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE23,VALUE23" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD6,RSVD6" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE22,VALUE22" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD5,RSVD5" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE21,VALUE21" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD4,RSVD4" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE20,VALUE20" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2BE0++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM6,32-level Histogram Parameter 2 Register" rbitfld.long 0x00 30.--31. "RSVD11,RSVD11" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE27,VALUE27" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD10,RSVD10" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE26,VALUE26" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD9,RSVD9" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE25,VALUE25" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD8,RSVD8" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE24,VALUE24" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2BF0++0x03 line.long 0x00 "HW_PXP_HIST32_PARAM7,32-level Histogram Parameter 3 Register" rbitfld.long 0x00 30.--31. "RSVD15,RSVD15" "0,1,2,3" newline bitfld.long 0x00 24.--29. "VALUE31,VALUE31" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 22.--23. "RSVD14,RSVD14" "0,1,2,3" newline bitfld.long 0x00 16.--21. "VALUE30,VALUE30" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 14.--15. "RSVD13,RSVD13" "0,1,2,3" newline bitfld.long 0x00 8.--13. "VALUE29,VALUE29" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline rbitfld.long 0x00 6.--7. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 0.--5. "VALUE28,VALUE28" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2C00++0x03 line.long 0x00 "HW_PXP_COMP_CTRL,This register defines the control bits for the pxp compression sub-block" hexmask.long.tbyte 0x00 9.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 8. "SW_RESET,SW_RESET" "0,1" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 0. "START,START" "0,1" group.long 0x2C04++0x03 line.long 0x00 "HW_PXP_COMP_CTRL_SET,This register defines the control bits for the pxp compression sub-block" hexmask.long.tbyte 0x00 9.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 8. "SW_RESET,SW_RESET" "0,1" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 0. "START,START" "0,1" group.long 0x2C08++0x03 line.long 0x00 "HW_PXP_COMP_CTRL_CLR,This register defines the control bits for the pxp compression sub-block" hexmask.long.tbyte 0x00 9.--31. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 8. "SW_RESET,SW_RESET" "0,1" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 0. "START,START" "0,1" group.long 0x2C0C++0x03 line.long 0x00 "HW_PXP_COMP_CTRL_TOG,This register defines the control bits for the pxp compression sub-block" hexmask.long.tbyte 0x00 9.--31. 1. "RSVD0,RSVD0" newline bitfld.long 0x00 8. "SW_RESET,SW_RESET" "0,1" newline hexmask.long.byte 0x00 1.--7. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 0. "START,START" "0,1" group.long 0x2C10++0x03 line.long 0x00 "HW_PXP_COMP_FORMAT0,This register defines the format bits for the pxp compression sub-block" rbitfld.long 0x00 28.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 27. "FIFOFULL,FIFOFULL" "0,1" newline rbitfld.long 0x00 26. "ERR_PRONE,ERR_PRONE" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "PIXEL_PITCH_64B,PIXEL_PITCH_64B" newline rbitfld.long 0x00 10.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--9. "MASK_INDEX,MASK_INDEX" "0,1,2,3" newline rbitfld.long 0x00 6.--7. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 4.--5. "FIELD_NUM,FIELD_NUM" "0,1,2,3" newline rbitfld.long 0x00 2.--3. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 1. "DISABLE_VALID_FIX,DISABLE_VALID_FIX" "0,1" newline bitfld.long 0x00 0. "FLAG_32B,FLAG_32B" "0,1" group.long 0x2C14++0x03 line.long 0x00 "HW_PXP_COMP_FORMAT0_SET,This register defines the format bits for the pxp compression sub-block" rbitfld.long 0x00 28.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 27. "FIFOFULL,FIFOFULL" "0,1" newline rbitfld.long 0x00 26. "ERR_PRONE,ERR_PRONE" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "PIXEL_PITCH_64B,PIXEL_PITCH_64B" newline rbitfld.long 0x00 10.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--9. "MASK_INDEX,MASK_INDEX" "0,1,2,3" newline rbitfld.long 0x00 6.--7. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 4.--5. "FIELD_NUM,FIELD_NUM" "0,1,2,3" newline rbitfld.long 0x00 2.--3. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 1. "DISABLE_VALID_FIX,DISABLE_VALID_FIX" "0,1" newline bitfld.long 0x00 0. "FLAG_32B,FLAG_32B" "0,1" group.long 0x2C18++0x03 line.long 0x00 "HW_PXP_COMP_FORMAT0_CLR,This register defines the format bits for the pxp compression sub-block" eventfld.long 0x00 28.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 27. "FIFOFULL,FIFOFULL" "0,1" newline eventfld.long 0x00 26. "ERR_PRONE,ERR_PRONE" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "PIXEL_PITCH_64B,PIXEL_PITCH_64B" newline eventfld.long 0x00 10.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline eventfld.long 0x00 8.--9. "MASK_INDEX,MASK_INDEX" "0,1,2,3" newline eventfld.long 0x00 6.--7. "RSVD2,RSVD2" "0,1,2,3" newline eventfld.long 0x00 4.--5. "FIELD_NUM,FIELD_NUM" "0,1,2,3" newline eventfld.long 0x00 2.--3. "RSVD3,RSVD3" "0,1,2,3" newline eventfld.long 0x00 1. "DISABLE_VALID_FIX,DISABLE_VALID_FIX" "0,1" newline eventfld.long 0x00 0. "FLAG_32B,FLAG_32B" "0,1" group.long 0x2C1C++0x03 line.long 0x00 "HW_PXP_COMP_FORMAT0_TOG,This register defines the format bits for the pxp compression sub-block" rbitfld.long 0x00 28.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 27. "FIFOFULL,FIFOFULL" "0,1" newline rbitfld.long 0x00 26. "ERR_PRONE,ERR_PRONE" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "PIXEL_PITCH_64B,PIXEL_PITCH_64B" newline rbitfld.long 0x00 10.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--9. "MASK_INDEX,MASK_INDEX" "0,1,2,3" newline rbitfld.long 0x00 6.--7. "RSVD2,RSVD2" "0,1,2,3" newline bitfld.long 0x00 4.--5. "FIELD_NUM,FIELD_NUM" "0,1,2,3" newline rbitfld.long 0x00 2.--3. "RSVD3,RSVD3" "0,1,2,3" newline bitfld.long 0x00 1. "DISABLE_VALID_FIX,DISABLE_VALID_FIX" "0,1" newline bitfld.long 0x00 0. "FLAG_32B,FLAG_32B" "0,1" group.long 0x2C20++0x03 line.long 0x00 "HW_PXP_COMP_FORMAT1,This register defines the format bits for the pxp compression sub-block" bitfld.long 0x00 29.--31. "D_LEN,D_LEN" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 24.--28. "D_OFFSET,D_OFFSET" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 21.--23. "C_LEN,C_LEN" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--20. "C_OFFSET,C_OFFSET" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 13.--15. "B_LEN,B_LEN" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--12. "B_OFFSET,B_OFFSET" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--7. "A_LEN,A_LEN" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. "A_OFFSET,A_OFFSET" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x2C30++0x03 line.long 0x00 "HW_PXP_COMP_FORMAT2,This register defines the format bits for the pxp compression sub-block" hexmask.long.word 0x00 16.--31. 1. "RSVD,RSVD" newline bitfld.long 0x00 12.--15. "D_RUNLEN,D_RUNLEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "C_RUNLEN,C_RUNLEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "B_RUNLEN,B_RUNLEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "A_RUNLEN,A_RUNLEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C40++0x03 line.long 0x00 "HW_PXP_COMP_MASK0,This register defines the format bits for the pxp compress mask configure" hexmask.long 0x00 0.--31. 1. "VLD_MASK_LOW,VLD_MASK_LOW" group.long 0x2C50++0x03 line.long 0x00 "HW_PXP_COMP_MASK1,This register defines the format bits for the pxp compress mask configure" hexmask.long 0x00 0.--31. 1. "VLD_MASK_HIGH,VLD_MASK_HIGH" group.long 0x2C60++0x03 line.long 0x00 "HW_PXP_COMP_BUFFER_SIZE,This register defines the format bits for the pxp compress mask configure" rbitfld.long 0x00 29.--31. "RSVD0,RSVD0" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 16.--28. 1. "PIXEL_WIDTH,PIXEL_WIDTH" newline rbitfld.long 0x00 13.--15. "RSVD1,RSVD1" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 0.--12. 1. "PIXEL_LENGTH,PIXEL_LENGTH" group.long 0x2C70++0x03 line.long 0x00 "HW_PXP_COMP_SOURCE,This register defines the pxp compress source buffer address register" hexmask.long 0x00 0.--31. 1. "SOURCE_ADDR,SOURCE_ADDR" group.long 0x2C80++0x03 line.long 0x00 "HW_PXP_COMP_TARGET,This register defines the pxp compress target buffer address register" hexmask.long 0x00 0.--31. 1. "TARGET_ADDR,TARGET_ADDR" group.long 0x2C90++0x03 line.long 0x00 "HW_PXP_COMP_BUFFER_A,This register defines the pxp compress field A buffer address register" hexmask.long 0x00 0.--31. 1. "A_SRAM_ADDR,A_SRAM_ADDR" group.long 0x2CA0++0x03 line.long 0x00 "HW_PXP_COMP_BUFFER_B,This register defines the pxp compress field B buffer address register" hexmask.long 0x00 0.--31. 1. "B_SRAM_ADDR,B_SRAM_ADDR" group.long 0x2CB0++0x03 line.long 0x00 "HW_PXP_COMP_BUFFER_C,This register defines the pxp compress field C buffer address register" hexmask.long 0x00 0.--31. 1. "C_SRAM_ADDR,C_SRAM_ADDR" group.long 0x2CC0++0x03 line.long 0x00 "HW_PXP_COMP_BUFFER_D,This register defines the pxp compress field D buffer address register" hexmask.long 0x00 0.--31. 1. "D_SRAM_ADDR,D_SRAM_ADDR" group.long 0x2CD0++0x03 line.long 0x00 "HW_PXP_COMP_DEBUG,This register defines the pxp compress debug register" hexmask.long.tbyte 0x00 8.--31. 1. "DEBUG_VALUE,DEBUG_VALUE" newline hexmask.long.byte 0x00 0.--7. 1. "DEBUG_SEL,DEBUG_SEL" group.long 0x2CE0++0x03 line.long 0x00 "HW_PXP_BUS_MUX,This register defines the pxp subblock bus mux on top level" hexmask.long.byte 0x00 24.--31. 1. "RSVD1,RSVD1" newline hexmask.long.byte 0x00 16.--23. 1. "WR_SEL,WR_SEL" newline hexmask.long.byte 0x00 8.--15. 1. "RSVD0,RSVD0" newline hexmask.long.byte 0x00 0.--7. 1. "RD_SEL,RD_SEL" group.long 0x2CF0++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_READY_MUX0,This register defines the pxp subblock handshake signals ready mux on top level" bitfld.long 0x00 28.--31. "HSK7,HSK7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24.--27. "HSK6,HSK6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "HSK5,HSK5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "HSK4,HSK4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "HSK3,HSK3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "HSK2,HSK2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "HSK1,HSK1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "HSK0,HSK0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D00++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_READY_MUX1,This register defines the pxp subblock handshake signals ready mux on top level" bitfld.long 0x00 28.--31. "HSK15,HSK15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24.--27. "HSK14,HSK14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "HSK13,HSK13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "HSK12,HSK12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "HSK11,HSK11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "HSK10,HSK10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "HSK9,HSK9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "HSK8,HSK8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D10++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_DONE_MUX0,This register defines the pxp subblock handshake signals done mux on top level" bitfld.long 0x00 28.--31. "HSK7,HSK7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24.--27. "HSK6,HSK6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "HSK5,HSK5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "HSK4,HSK4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "HSK3,HSK3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "HSK2,HSK2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "HSK1,HSK1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "HSK0,HSK0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D20++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_DONE_MUX1,This register defines the pxp subblock handshake signals done mux on top level" bitfld.long 0x00 28.--31. "HSK15,HSK15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 24.--27. "HSK14,HSK14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "HSK13,HSK13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "HSK12,HSK12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "HSK11,HSK11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "HSK10,HSK10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "HSK9,HSK9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "HSK8,HSK8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D30++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_FETCH,This register defines the pxp software handshake signals with CPU" bitfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline rbitfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0: LINE_4,1: LINE_8,2: LINE_16,?..." newline bitfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline bitfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline rbitfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline rbitfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline bitfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline rbitfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0: LINE_4,1: LINE_8,2: LINE_16,?..." newline bitfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline bitfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline rbitfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline rbitfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D34++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_FETCH_SET,This register defines the pxp software handshake signals with CPU" bitfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline rbitfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0,1,2,3" newline bitfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline bitfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline rbitfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline rbitfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline bitfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline rbitfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0,1,2,3" newline bitfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline bitfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline rbitfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline rbitfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D38++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_FETCH_CLR,This register defines the pxp software handshake signals with CPU" eventfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0,1,2,3" newline eventfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline eventfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline eventfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline eventfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline eventfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0,1,2,3" newline eventfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline eventfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline eventfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline eventfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D3C++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_FETCH_TOG,This register defines the pxp software handshake signals with CPU" bitfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline rbitfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0,1,2,3" newline bitfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline bitfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline rbitfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline rbitfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline bitfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline rbitfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0,1,2,3" newline bitfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline bitfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline rbitfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline rbitfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D40++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_STORE,This register defines the pxp software handshake signals with CPU" bitfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline rbitfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0: LINE_4,1: LINE_8,2: LINE_16,?..." newline rbitfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline rbitfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline bitfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline bitfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline bitfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline rbitfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0: LINE_4,1: LINE_8,2: LINE_16,?..." newline rbitfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline rbitfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline bitfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline bitfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D44++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_STORE_SET,This register defines the pxp software handshake signals with CPU" bitfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline rbitfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0,1,2,3" newline rbitfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline rbitfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline bitfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline bitfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline bitfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline rbitfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0,1,2,3" newline rbitfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline rbitfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline bitfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline bitfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D48++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_STORE_CLR,This register defines the pxp software handshake signals with CPU" eventfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0,1,2,3" newline eventfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline eventfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline eventfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline eventfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline eventfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline eventfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0,1,2,3" newline eventfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline eventfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline eventfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline eventfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D4C++0x03 line.long 0x00 "HW_PXP_HANDSHAKE_CPU_STORE_TOG,This register defines the pxp software handshake signals with CPU" bitfld.long 0x00 31. "SW1_HSK_EN,SW1_HSK_EN" "0,1" newline hexmask.long.word 0x00 22.--30. 1. "RSVD1,RSVD1" newline rbitfld.long 0x00 20.--21. "SW1_BUF_LINES,SW1_BUF_LINES" "0,1,2,3" newline rbitfld.long 0x00 19. "SW1_B1_DONE,SW1_B1_DONE" "0,1" newline rbitfld.long 0x00 18. "SW1_B0_DONE,SW1_B0_DONE" "0,1" newline bitfld.long 0x00 17. "SW1_B1_READY,SW1_B1_READY" "0,1" newline bitfld.long 0x00 16. "SW1_B0_READY,SW1_B0_READY" "0,1" newline bitfld.long 0x00 15. "SW0_HSK_EN,SW0_HSK_EN" "0,1" newline hexmask.long.word 0x00 6.--14. 1. "RSVD0,RSVD0" newline rbitfld.long 0x00 4.--5. "SW0_BUF_LINES,SW0_BUF_LINES" "0,1,2,3" newline rbitfld.long 0x00 3. "SW0_B1_DONE,SW0_B1_DONE" "0,1" newline rbitfld.long 0x00 2. "SW0_B0_DONE,SW0_B0_DONE" "0,1" newline bitfld.long 0x00 1. "SW0_B1_READY,SW0_B1_READY" "0,1" newline bitfld.long 0x00 0. "SW0_B0_READY,SW0_B0_READY" "0,1" group.long 0x2D50++0x03 line.long 0x00 "HW_PXP_CFA_CTRL,CFA RGB format control" bitfld.long 0x00 31. "CFA_BYPASS,CFA_BYPASS" "0,1" newline bitfld.long 0x00 30. "CFA_IN_RGB444,CFA_IN_RGB444" "0: CFA input is RGB888 format,1: CFA input is RGB444 format" newline hexmask.long.tbyte 0x00 8.--29. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 4.--7. "CFA_ARRAY_VSIZE,CFA array vertical size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CFA_ARRAY_HSIZE,CFA array horizontal size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D54++0x03 line.long 0x00 "HW_PXP_CFA_CTRL_SET,CFA RGB format control" bitfld.long 0x00 31. "CFA_BYPASS,CFA_BYPASS" "0,1" newline bitfld.long 0x00 30. "CFA_IN_RGB444,CFA_IN_RGB444" "0,1" newline hexmask.long.tbyte 0x00 8.--29. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 4.--7. "CFA_ARRAY_VSIZE,CFA array vertical size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CFA_ARRAY_HSIZE,CFA array horizontal size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D58++0x03 line.long 0x00 "HW_PXP_CFA_CTRL_CLR,CFA RGB format control" eventfld.long 0x00 31. "CFA_BYPASS,CFA_BYPASS" "0,1" newline eventfld.long 0x00 30. "CFA_IN_RGB444,CFA_IN_RGB444" "0,1" newline hexmask.long.tbyte 0x00 8.--29. 1. "RSVD1,RSVD1" newline eventfld.long 0x00 4.--7. "CFA_ARRAY_VSIZE,CFA array vertical size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline eventfld.long 0x00 0.--3. "CFA_ARRAY_HSIZE,CFA array horizontal size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D5C++0x03 line.long 0x00 "HW_PXP_CFA_CTRL_TOG,CFA RGB format control" bitfld.long 0x00 31. "CFA_BYPASS,CFA_BYPASS" "0,1" newline bitfld.long 0x00 30. "CFA_IN_RGB444,CFA_IN_RGB444" "0,1" newline hexmask.long.tbyte 0x00 8.--29. 1. "RSVD1,RSVD1" newline bitfld.long 0x00 4.--7. "CFA_ARRAY_VSIZE,CFA array vertical size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CFA_ARRAY_HSIZE,CFA array horizontal size in pixels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D60++0x03 line.long 0x00 "HW_PXP_CFA_SIZE,HW_PXP_CFA_SIZE" hexmask.long.word 0x00 16.--31. 1. "CFA_HSIZE,CFA horizontal size in pixels" newline hexmask.long.word 0x00 0.--15. 1. "CFA_VSIZE,CFA vertical size in pixels" group.long 0x2D70++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY0,HW_PXP_CFA_ARRAY0" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY0,CFA array value" group.long 0x2D80++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY1,HW_PXP_CFA_ARRAY1" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY1,CFA array value" group.long 0x2D90++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY2,HW_PXP_CFA_ARRAY2" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY2,CFA array value" group.long 0x2DA0++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY3,HW_PXP_CFA_ARRAY3" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY3,CFA array value" group.long 0x2DB0++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY4,HW_PXP_CFA_ARRAY4" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY4,CFA array value" group.long 0x2DC0++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY5,HW_PXP_CFA_ARRAY5" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY5,CFA array value" group.long 0x2DD0++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY6,HW_PXP_CFA_ARRAY6" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY6,CFA array value" group.long 0x2DE0++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY7,HW_PXP_CFA_ARRAY7" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY7,CFA array value" group.long 0x2DF0++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY8,HW_PXP_CFA_ARRAY8" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY8,CFA array value" group.long 0x2E00++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY9,HW_PXP_CFA_ARRAY9" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY9,CFA array value" group.long 0x2E10++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY10,HW_PXP_CFA_ARRAY10" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY10,CFA array value" group.long 0x2E20++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY11,HW_PXP_CFA_ARRAY11" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY11,CFA array value" group.long 0x2E30++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY12,HW_PXP_CFA_ARRAY12" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY12,CFA array value" group.long 0x2E40++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY13,HW_PXP_CFA_ARRAY13" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY13,CFA array value" group.long 0x2E50++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY14,HW_PXP_CFA_ARRAY14" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY14,CFA array value" group.long 0x2E60++0x03 line.long 0x00 "HW_PXP_CFA_ARRAY15,HW_PXP_CFA_ARRAY15" hexmask.long 0x00 0.--31. 1. "CFA_ARRAY15,CFA array value" tree.end tree "SAI" tree "SAI0" base ad:0x2809C000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" bitfld.long 0x00 16.--19. "FRAME,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "FIFO,FIFO Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DATALINE,Number of Datalines" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x08++0x03 line.long 0x00 "TCSR,Transmit Control" bitfld.long 0x00 31. "TE,Transmitter Enable" "0: Transmitter is disabled,1: Transmitter is enabled or transmitter has.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode,1: Transmitter enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled,1: Transmit bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected,1: Transmit underrun detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty,1: Enabled transmit FIFO is empty" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached,1: Transmit FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x0C++0x03 line.long 0x00 "TCR1,Transmit Configuration 1" bitfld.long 0x00 0.--3. "TFW,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10++0x03 line.long 0x00 "TCR2,Transmit Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver,2: Synchronous with another SAI transmitter,3: Synchronous with another SAI receiver" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x14++0x03 line.long 0x00 "TCR3,Transmit Configuration 3" bitfld.long 0x00 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0x00 16.--17. "TCE,Transmit Channel Enable" "0,1,2,3" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x18++0x03 line.long 0x00 "TCR4,Transmit Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO reads (from..,2: FIFO combine mode enabled on FIFO writes (by..,3: FIFO combine mode enabled on FIFO reads (from.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are tri-stated..,1: Output mode transmit data pins are never.." newline bitfld.long 0x00 4. "MF,MSB First" "0: LSB is transmitted first,1: MSB is transmitted first" bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." newline bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" newline bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave..,1: Frame sync is generated internally in Master.." group.long 0x1C++0x03 line.long 0x00 "TCR5,Transmit Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 2. (increment 0 1) (increment 0 0x4) group.long ($2+0x20)++0x03 line.long 0x00 "TDR[$1],Transmit Data $1" hexmask.long 0x00 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 2. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0x40)++0x03 line.long 0x00 "TFR[$1],Transmit FIFO $1" bitfld.long 0x00 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO writes and.." bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0x60++0x03 line.long 0x00 "TMR,Transmit Mask" hexmask.long 0x00 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x03 line.long 0x00 "TTCR,Transmit Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0x74++0x03 line.long 0x00 "TTSR,Transmit Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0x78++0x03 line.long 0x00 "TBCR,Transmit Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0x7C++0x03 line.long 0x00 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x03 line.long 0x00 "RCSR,Receive Control" bitfld.long 0x00 31. "RE,Receiver Enable" "0: Receiver is disabled,1: Receiver is enabled or receiver has been.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode,1: Receiver enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled,1: Receive bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected,1: Receive overflow detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full,1: Enabled receive FIFO is full" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached,1: Receive FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x8C++0x03 line.long 0x00 "RCR1,Receive Configuration 1" bitfld.long 0x00 0.--3. "RFW,Receive FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "RCR2,Receive Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter,2: Synchronous with another SAI receiver,3: Synchronous with another SAI transmitter" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit Clock is active high with drive outputs..,1: Bit Clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x94++0x03 line.long 0x00 "RCR3,Receive Configuration 3" bitfld.long 0x00 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0x00 16.--17. "RCE,Receive Channel Enable" "0,1,2,3" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x98++0x03 line.long 0x00 "RCR4,Receive Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO writes..,2: FIFO combine mode enabled on FIFO reads (by..,3: FIFO combine mode enabled on FIFO writes.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. "MF,MSB First" "0: LSB is received first,1: MSB is received first" newline bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." newline bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave..,1: Frame Sync is generated internally in Master.." group.long 0x9C++0x03 line.long 0x00 "RCR5,Receive Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 2. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xA0)++0x03 line.long 0x00 "RDR[$1],Receive Data $1" hexmask.long 0x00 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 2. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xC0)++0x03 line.long 0x00 "RFR[$1],Receive FIFO $1" bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15. "RCP,Receive Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO reads and.." newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0xE0++0x03 line.long 0x00 "RMR,Receive Mask" hexmask.long 0x00 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x03 line.long 0x00 "RTCR,Receive Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0xF4++0x03 line.long 0x00 "RTSR,Receive Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0xF8++0x03 line.long 0x00 "RBCR,Receive Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0xFC++0x03 line.long 0x00 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" tree.end tree "SAI1" base ad:0x2809D000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" bitfld.long 0x00 16.--19. "FRAME,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "FIFO,FIFO Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DATALINE,Number of Datalines" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x08++0x03 line.long 0x00 "TCSR,Transmit Control" bitfld.long 0x00 31. "TE,Transmitter Enable" "0: Transmitter is disabled,1: Transmitter is enabled or transmitter has.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode,1: Transmitter enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled,1: Transmit bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected,1: Transmit underrun detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty,1: Enabled transmit FIFO is empty" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached,1: Transmit FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x0C++0x03 line.long 0x00 "TCR1,Transmit Configuration 1" bitfld.long 0x00 0.--3. "TFW,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10++0x03 line.long 0x00 "TCR2,Transmit Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver,2: Synchronous with another SAI transmitter,3: Synchronous with another SAI receiver" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x14++0x03 line.long 0x00 "TCR3,Transmit Configuration 3" bitfld.long 0x00 24.--27. "CFR,Channel FIFO Reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "TCE,Transmit Channel Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x18++0x03 line.long 0x00 "TCR4,Transmit Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO reads (from..,2: FIFO combine mode enabled on FIFO writes (by..,3: FIFO combine mode enabled on FIFO reads (from.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are tri-stated..,1: Output mode transmit data pins are never.." newline bitfld.long 0x00 4. "MF,MSB First" "0: LSB is transmitted first,1: MSB is transmitted first" bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." newline bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" newline bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave..,1: Frame sync is generated internally in Master.." group.long 0x1C++0x03 line.long 0x00 "TCR5,Transmit Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 4. (increment 0 1) (increment 0 0x4) group.long ($2+0x20)++0x03 line.long 0x00 "TDR[$1],Transmit Data $1" hexmask.long 0x00 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 4. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0x40)++0x03 line.long 0x00 "TFR[$1],Transmit FIFO $1" bitfld.long 0x00 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO writes and.." bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0x60++0x03 line.long 0x00 "TMR,Transmit Mask" hexmask.long 0x00 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x03 line.long 0x00 "TTCR,Transmit Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0x74++0x03 line.long 0x00 "TTSR,Transmit Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0x78++0x03 line.long 0x00 "TBCR,Transmit Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0x7C++0x03 line.long 0x00 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x03 line.long 0x00 "RCSR,Receive Control" bitfld.long 0x00 31. "RE,Receiver Enable" "0: Receiver is disabled,1: Receiver is enabled or receiver has been.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode,1: Receiver enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled,1: Receive bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected,1: Receive overflow detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full,1: Enabled receive FIFO is full" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached,1: Receive FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x8C++0x03 line.long 0x00 "RCR1,Receive Configuration 1" bitfld.long 0x00 0.--3. "RFW,Receive FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "RCR2,Receive Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter,2: Synchronous with another SAI receiver,3: Synchronous with another SAI transmitter" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit Clock is active high with drive outputs..,1: Bit Clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x94++0x03 line.long 0x00 "RCR3,Receive Configuration 3" bitfld.long 0x00 24.--27. "CFR,Channel FIFO Reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "RCE,Receive Channel Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x98++0x03 line.long 0x00 "RCR4,Receive Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO writes..,2: FIFO combine mode enabled on FIFO reads (by..,3: FIFO combine mode enabled on FIFO writes.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. "MF,MSB First" "0: LSB is received first,1: MSB is received first" newline bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." newline bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave..,1: Frame Sync is generated internally in Master.." group.long 0x9C++0x03 line.long 0x00 "RCR5,Receive Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 4. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xA0)++0x03 line.long 0x00 "RDR[$1],Receive Data $1" hexmask.long 0x00 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 4. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xC0)++0x03 line.long 0x00 "RFR[$1],Receive FIFO $1" bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15. "RCP,Receive Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO reads and.." newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0xE0++0x03 line.long 0x00 "RMR,Receive Mask" hexmask.long 0x00 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x03 line.long 0x00 "RTCR,Receive Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0xF4++0x03 line.long 0x00 "RTSR,Receive Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0xF8++0x03 line.long 0x00 "RBCR,Receive Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0xFC++0x03 line.long 0x00 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" tree.end repeat 3. (list 2. 3. 4.) (list ad:0x2810F000 ad:0x28110000 ad:0x29880000) tree "SAI$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" bitfld.long 0x00 16.--19. "FRAME,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "FIFO,FIFO Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DATALINE,Number of Datalines" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x08++0x03 line.long 0x00 "TCSR,Transmit Control" bitfld.long 0x00 31. "TE,Transmitter Enable" "0: Transmitter is disabled,1: Transmitter is enabled or transmitter has.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode,1: Transmitter enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled,1: Transmit bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected,1: Transmit underrun detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty,1: Enabled transmit FIFO is empty" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached,1: Transmit FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x0C++0x03 line.long 0x00 "TCR1,Transmit Configuration 1" bitfld.long 0x00 0.--3. "TFW,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10++0x03 line.long 0x00 "TCR2,Transmit Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver,2: Synchronous with another SAI transmitter,3: Synchronous with another SAI receiver" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x14++0x03 line.long 0x00 "TCR3,Transmit Configuration 3" bitfld.long 0x00 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0x00 16.--17. "TCE,Transmit Channel Enable" "0,1,2,3" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x18++0x03 line.long 0x00 "TCR4,Transmit Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO reads (from..,2: FIFO combine mode enabled on FIFO writes (by..,3: FIFO combine mode enabled on FIFO reads (from.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are tri-stated..,1: Output mode transmit data pins are never.." newline bitfld.long 0x00 4. "MF,MSB First" "0: LSB is transmitted first,1: MSB is transmitted first" bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." newline bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" newline bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave..,1: Frame sync is generated internally in Master.." group.long 0x1C++0x03 line.long 0x00 "TCR5,Transmit Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 2. (increment 0 1) (increment 0 0x4) group.long ($2+0x20)++0x03 line.long 0x00 "TDR[$1],Transmit Data $1" hexmask.long 0x00 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 2. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0x40)++0x03 line.long 0x00 "TFR[$1],Transmit FIFO $1" bitfld.long 0x00 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO writes and.." bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0x60++0x03 line.long 0x00 "TMR,Transmit Mask" hexmask.long 0x00 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x03 line.long 0x00 "TTCR,Transmit Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0x74++0x03 line.long 0x00 "TTSR,Transmit Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0x78++0x03 line.long 0x00 "TBCR,Transmit Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0x7C++0x03 line.long 0x00 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x03 line.long 0x00 "RCSR,Receive Control" bitfld.long 0x00 31. "RE,Receiver Enable" "0: Receiver is disabled,1: Receiver is enabled or receiver has been.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode,1: Receiver enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled,1: Receive bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected,1: Receive overflow detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full,1: Enabled receive FIFO is full" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached,1: Receive FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x8C++0x03 line.long 0x00 "RCR1,Receive Configuration 1" bitfld.long 0x00 0.--3. "RFW,Receive FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "RCR2,Receive Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter,2: Synchronous with another SAI receiver,3: Synchronous with another SAI transmitter" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit Clock is active high with drive outputs..,1: Bit Clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x94++0x03 line.long 0x00 "RCR3,Receive Configuration 3" bitfld.long 0x00 24.--25. "CFR,Channel FIFO Reset" "0,1,2,3" bitfld.long 0x00 16.--17. "RCE,Receive Channel Enable" "0,1,2,3" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x98++0x03 line.long 0x00 "RCR4,Receive Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO writes..,2: FIFO combine mode enabled on FIFO reads (by..,3: FIFO combine mode enabled on FIFO writes.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. "MF,MSB First" "0: LSB is received first,1: MSB is received first" newline bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." newline bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave..,1: Frame Sync is generated internally in Master.." group.long 0x9C++0x03 line.long 0x00 "RCR5,Receive Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 2. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xA0)++0x03 line.long 0x00 "RDR[$1],Receive Data $1" hexmask.long 0x00 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 2. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xC0)++0x03 line.long 0x00 "RFR[$1],Receive FIFO $1" bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15. "RCP,Receive Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO reads and.." newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0xE0++0x03 line.long 0x00 "RMR,Receive Mask" hexmask.long 0x00 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x03 line.long 0x00 "RTCR,Receive Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0xF4++0x03 line.long 0x00 "RTSR,Receive Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0xF8++0x03 line.long 0x00 "RBCR,Receive Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0xFC++0x03 line.long 0x00 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" tree.end repeat.end repeat 3. (list 5. 6. 7.) (list ad:0x29890000 ad:0x2DA90000 ad:0x2DAA0000) tree "SAI$1" base $2 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" bitfld.long 0x00 16.--19. "FRAME,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "FIFO,FIFO Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DATALINE,Number of Datalines" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x08++0x03 line.long 0x00 "TCSR,Transmit Control" bitfld.long 0x00 31. "TE,Transmitter Enable" "0: Transmitter is disabled,1: Transmitter is enabled or transmitter has.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Transmitter disabled in Stop mode,1: Transmitter enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Transmitter is disabled in Debug mode after..,1: Transmitter is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Transmit bit clock is disabled,1: Transmit bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Transmit underrun not detected,1: Transmit underrun detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled transmit FIFO is empty,1: Enabled transmit FIFO is empty" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Transmit FIFO watermark has not been reached,1: Transmit FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x0C++0x03 line.long 0x00 "TCR1,Transmit Configuration 1" bitfld.long 0x00 0.--3. "TFW,Transmit FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10++0x03 line.long 0x00 "TCR2,Transmit Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with receiver,2: Synchronous with another SAI transmitter,3: Synchronous with another SAI receiver" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit clock is active high with drive outputs..,1: Bit clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x14++0x03 line.long 0x00 "TCR3,Transmit Configuration 3" bitfld.long 0x00 24.--27. "CFR,Channel FIFO Reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "TCE,Transmit Channel Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x18++0x03 line.long 0x00 "TCR4,Transmit Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO reads (from..,2: FIFO combine mode enabled on FIFO writes (by..,3: FIFO combine mode enabled on FIFO reads (from.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. "CHMOD,Channel Mode" "0: TDM mode transmit data pins are tri-stated..,1: Output mode transmit data pins are never.." newline bitfld.long 0x00 4. "MF,MSB First" "0: LSB is transmitted first,1: MSB is transmitted first" bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." newline bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" newline bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame sync is generated externally in Slave..,1: Frame sync is generated internally in Master.." group.long 0x1C++0x03 line.long 0x00 "TCR5,Transmit Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 4. (increment 0 1) (increment 0 0x4) group.long ($2+0x20)++0x03 line.long 0x00 "TDR[$1],Transmit Data $1" hexmask.long 0x00 0.--31. 1. "TDR,Transmit Data Register" repeat.end repeat 4. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0x40)++0x03 line.long 0x00 "TFR[$1],Transmit FIFO $1" bitfld.long 0x00 31. "WCP,Write Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO writes and.." bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0x60++0x03 line.long 0x00 "TMR,Transmit Mask" hexmask.long 0x00 0.--31. 1. "TWM,Transmit Word Mask" group.long 0x70++0x03 line.long 0x00 "TTCR,Transmit Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0x74++0x03 line.long 0x00 "TTSR,Transmit Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0x78++0x03 line.long 0x00 "TBCR,Transmit Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0x7C++0x03 line.long 0x00 "TBCTR,Transmit Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" group.long 0x88++0x03 line.long 0x00 "RCSR,Receive Control" bitfld.long 0x00 31. "RE,Receiver Enable" "0: Receiver is disabled,1: Receiver is enabled or receiver has been.." bitfld.long 0x00 30. "STOPE,Stop Enable" "0: Receiver disabled in Stop mode,1: Receiver enabled in Stop mode" newline bitfld.long 0x00 29. "DBGE,Debug Enable" "0: Receiver is disabled in Debug mode after..,1: Receiver is enabled in Debug mode" bitfld.long 0x00 28. "BCE,Bit Clock Enable" "0: Receive bit clock is disabled,1: Receive bit clock is enabled" newline bitfld.long 0x00 25. "FR,FIFO Reset" "0: No effect,1: FIFO reset" bitfld.long 0x00 24. "SR,Software Reset" "0: No effect,1: Software reset" newline eventfld.long 0x00 20. "WSF,Word Start Flag" "0: Start of word not detected,1: Start of word detected" eventfld.long 0x00 19. "SEF,Sync Error Flag" "0: Sync error not detected,1: Frame sync error detected" newline eventfld.long 0x00 18. "FEF,FIFO Error Flag" "0: Receive overflow not detected,1: Receive overflow detected" rbitfld.long 0x00 17. "FWF,FIFO Warning Flag" "0: No enabled receive FIFO is full,1: Enabled receive FIFO is full" newline rbitfld.long 0x00 16. "FRF,FIFO Request Flag" "0: Receive FIFO watermark not reached,1: Receive FIFO watermark has been reached" bitfld.long 0x00 12. "WSIE,Word Start Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" newline bitfld.long 0x00 11. "SEIE,Sync Error Interrupt Enable" "0: Disables interrupt,1: Enables interrupt" bitfld.long 0x00 10. "FEIE,FIFO Error Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 9. "FWIE,FIFO Warning Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" bitfld.long 0x00 8. "FRIE,FIFO Request Interrupt Enable" "0: Disables the interrupt,1: Enables the interrupt" newline bitfld.long 0x00 1. "FWDE,FIFO Warning DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" bitfld.long 0x00 0. "FRDE,FIFO Request DMA Enable" "0: Disables the DMA request,1: Enables the DMA request" group.long 0x8C++0x03 line.long 0x00 "RCR1,Receive Configuration 1" bitfld.long 0x00 0.--3. "RFW,Receive FIFO Watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "RCR2,Receive Configuration 2" bitfld.long 0x00 30.--31. "SYNC,Synchronous Mode" "0: Asynchronous mode,1: Synchronous with transmitter,2: Synchronous with another SAI receiver,3: Synchronous with another SAI transmitter" bitfld.long 0x00 29. "BCS,Bit Clock Swap" "0: Use the normal bit clock source,1: Swap the bit clock source" newline bitfld.long 0x00 28. "BCI,Bit Clock Input" "0: No effect,1: Internal logic is clocked as if bit clock was.." bitfld.long 0x00 26.--27. "MSEL,MCLK Select" "0: Bus Clock selected,1: Master Clock (MCLK) 1 option selected,2: Master Clock (MCLK) 2 option selected,3: Master Clock (MCLK) 3 option selected" newline bitfld.long 0x00 25. "BCP,Bit Clock Polarity" "0: Bit Clock is active high with drive outputs..,1: Bit Clock is active low with drive outputs on.." bitfld.long 0x00 24. "BCD,Bit Clock Direction" "0: Bit clock is generated externally in Slave mode,1: Bit clock is generated internally in Master.." newline bitfld.long 0x00 23. "BYP,Bit Clock Bypass" "0: Internal bit clock is generated from bit..,1: Internal bit clock is divide by one of the.." hexmask.long.byte 0x00 0.--7. 1. "DIV,Bit Clock Divide" group.long 0x94++0x03 line.long 0x00 "RCR3,Receive Configuration 3" bitfld.long 0x00 24.--27. "CFR,Channel FIFO Reset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "RCE,Receive Channel Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. "WDFL,Word Flag Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x98++0x03 line.long 0x00 "RCR4,Receive Configuration 4" bitfld.long 0x00 28. "FCONT,FIFO Continue on Error" "0: On FIFO error the SAI will continue from the..,1: On FIFO error the SAI will continue from the.." bitfld.long 0x00 26.--27. "FCOMB,FIFO Combine Mode" "0: FIFO combine mode disabled,1: FIFO combine mode enabled on FIFO writes..,2: FIFO combine mode enabled on FIFO reads (by..,3: FIFO combine mode enabled on FIFO writes.." newline bitfld.long 0x00 24.--25. "FPACK,FIFO Packing Mode" "0: FIFO packing is disabled,?,2: 8-bit FIFO packing is enabled,3: 16-bit FIFO packing is enabled" bitfld.long 0x00 16.--20. "FRSZ,Frame Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "SYWD,Sync Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. "MF,MSB First" "0: LSB is received first,1: MSB is received first" newline bitfld.long 0x00 3. "FSE,Frame Sync Early" "0: Frame sync asserts with the first bit of the..,1: Frame sync asserts one bit before the first.." bitfld.long 0x00 2. "ONDEM,On Demand Mode" "0: Internal frame sync is generated continuously,1: Internal frame sync is generated when the.." newline bitfld.long 0x00 1. "FSP,Frame Sync Polarity" "0: Frame sync is active high,1: Frame sync is active low" bitfld.long 0x00 0. "FSD,Frame Sync Direction" "0: Frame Sync is generated externally in Slave..,1: Frame Sync is generated internally in Master.." group.long 0x9C++0x03 line.long 0x00 "RCR5,Receive Configuration 5" bitfld.long 0x00 24.--28. "WNW,Word N Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "W0W,Word 0 Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--12. "FBT,First Bit Shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat 4. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xA0)++0x03 line.long 0x00 "RDR[$1],Receive Data $1" hexmask.long 0x00 0.--31. 1. "RDR,Receive Data Register" repeat.end repeat 4. (increment 0 1) (increment 0 0x4) rgroup.long ($2+0xC0)++0x03 line.long 0x00 "RFR[$1],Receive FIFO $1" bitfld.long 0x00 16.--20. "WFP,Write FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15. "RCP,Receive Channel Pointer" "0: No effect,1: FIFO combine is enabled for FIFO reads and.." newline bitfld.long 0x00 0.--4. "RFP,Read FIFO Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0xE0++0x03 line.long 0x00 "RMR,Receive Mask" hexmask.long 0x00 0.--31. 1. "RWM,Receive Word Mask" group.long 0xF0++0x03 line.long 0x00 "RTCR,Receive Timestamp Control" bitfld.long 0x00 9. "RBC,Reset Bit Counter" "0: Bit counter is not reset,1: Bit counter is reset" bitfld.long 0x00 8. "RTSC,Reset Timestamp Counter" "0: Timestamp counter is not reset,1: Timestamp counter is reset" newline bitfld.long 0x00 1. "TSINC,Timestamp Increment" "0: Timestamp counter starts to increment when..,1: Timestamp counter starts to increment when.." bitfld.long 0x00 0. "TSEN,Timestamp Enable" "0: Timestamp counter is disabled,1: Timestamp counter is enabled" rgroup.long 0xF4++0x03 line.long 0x00 "RTSR,Receive Timestamp" hexmask.long 0x00 0.--31. 1. "TSC,Timestamp Counter" rgroup.long 0xF8++0x03 line.long 0x00 "RBCR,Receive Bit Count" hexmask.long 0x00 0.--31. 1. "BCNT,Bit Counter" rgroup.long 0xFC++0x03 line.long 0x00 "RBCTR,Receive Bit Count Timestamp" hexmask.long 0x00 0.--31. 1. "BCTS,Bit Timestamp" tree.end repeat.end tree.end tree "SEMA42" repeat 3. (list 0. 1. 2.) (list ad:0x28037000 ad:0x29300000 ad:0x2DA30000) tree "SEMA42_$1" base $2 repeat 16. (strings "3" "2" "1" "0" "7" "6" "5" "4" "11" "10" "9" "8" "15" "14" "13" "12" )(list 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF ) group.byte ($2+0x00)++0x00 line.byte 0x00 "GATE$1,Gate Register" bitfld.byte 0x00 0.--3. "GTFSM,Gate finite state machine" "0: The gate is unlocked (free),1: Domain 0 locked the gate,2: Domain 1 locked the gate,3: Domain 2 locked the gate,4: Domain 3 locked the gate,5: Domain 4 locked the gate,6: Domain 5 locked the gate,7: Domain 6 locked the gate,8: Domain 7 locked the gate,9: Domain 8 locked the gate,10: Domain 9 locked the gate,11: Domain 10 locked the gate,12: Domain 11 locked the gate,13: Domain 12 locked the gate,14: Domain 13 locked the gate,15: Domain 14 locked the gate" repeat.end rgroup.word 0x42++0x01 line.word 0x00 "RSTGT_R,Reset Gate" bitfld.word 0x00 14.--15. "ROZ,ROZ" "0,1,2,3" bitfld.word 0x00 12.--13. "RSTGSM,Reset gate finite state machine" "0: Idle waiting for the first data pattern,1: Waiting for the second data pattern,2: The 2-write sequence has completed,?..." newline bitfld.word 0x00 8.--11. "RSTGMS,Reset gate domain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.word.byte 0x00 0.--7. 1. "RSTGTN,Reset gate number" wgroup.word 0x42++0x01 line.word 0x00 "RSTGT_W,Reset Gate" hexmask.word.byte 0x00 8.--15. 1. "RSTGDP,Reset gate data pattern" hexmask.word.byte 0x00 0.--7. 1. "RSTGTN,Reset gate number" tree.end repeat.end tree.end tree "SFA (Signal Frequency Analyser)" repeat 3. (list 0. 1. 2.) (list ad:0x280A5000 ad:0x29960000 ad:0x2DB50000) tree "SFA$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Signal Frequency Analyser (SFA) Control" bitfld.long 0x00 24.--27. "CUT_SEL,CUT_SEL" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 16.--23. 1. "CUT_PREDIV,CUT_PREDIV" newline bitfld.long 0x00 12.--13. "TRIG_END_SEL,Signal MUX For Trigger Based Measurement End" "0,1,2,3" bitfld.long 0x00 8.--9. "TRIG_START_SEL,Signal MUX For Trigger Based Measurement Start" "0,1,2,3" newline bitfld.long 0x00 6. "SFA_EN,SFA Enable" "0: The SFA is disabled,1: The SFA is enabled" bitfld.long 0x00 5. "SFA_IRQ_EN,SFA Interrupt Enable" "0: Interrupts are disabled,1: Interrupts are enabled" newline bitfld.long 0x00 4. "SFA_TRIG_MEAS_EN,SFA Triggered Measurement Enable" "0: The measurement will start by default with a..,1: The measurement will start after receiging a.." bitfld.long 0x00 3. "TRIG_END_POL,Trigger End Polarity" "0: Rising edge of TRIGER[TRIG_END_SEL] will end..,1: Falling edge of TRIGGER[TRIG_END_SEL] will.." newline bitfld.long 0x00 2. "TRIG_START_POL,Trigger Start Polarity" "0: Rising edge of TRIGGER[TRIG_START_SEL] will..,1: Falling edge of TRIGGER[TRIG_START_SEL] will.." bitfld.long 0x00 0.--1. "MODE,MEASUREMENT MODE" "0: Frequency measurement performed with REF..,1: Frequency measurement performed with REF..,2: CUT period measurement performed,3: Trigger based measurement performed" group.long 0x04++0x03 line.long 0x00 "CTRL_EXT,Signal Frequency Analyser (SFA) Control Extended" bitfld.long 0x00 16. "CUT_PIN_EN,CUT_PIN_EN" "0,1" hexmask.long.word 0x00 0.--15. 1. "CUT_CLK_EN,CUT_CLK_EN" group.long 0x08++0x03 line.long 0x00 "CNT_STAT,Signal Frequency Analyser Count Status Register" eventfld.long 0x00 4. "SFA_IRQ,SFA Interrupt Request" "0,1" rbitfld.long 0x00 3. "REF_CNT_TIMEOUT,Reference Counter Time Out" "0,1" newline rbitfld.long 0x00 2. "MEAS_STARTED,Measurement Started Flag" "0,1" rbitfld.long 0x00 1. "CUT_STOPPED,CUT_STOPPED" "0,1" newline rbitfld.long 0x00 0. "REF_STOPPED,REF_STOPPED" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "CUT_CNT,Signal Frequency Analyser Clock Under Test Counter" hexmask.long 0x00 0.--31. 1. "CUT_CNT,CUT_CNT" rgroup.long 0x10++0x03 line.long 0x00 "REF_CNT,Signal Frequency Analyser Reference Clock Counter" hexmask.long 0x00 0.--31. 1. "REF_CNT,REF_CNT" group.long 0x14++0x03 line.long 0x00 "CUT_TARGET,Signal Frequency Analyser Clock Under Test Target Count" hexmask.long 0x00 0.--31. 1. "CUT_TARGET,CUT_TARGET" group.long 0x18++0x03 line.long 0x00 "REF_TARGET,Signal Frequency Analyser Reference Clock Target Count" hexmask.long 0x00 0.--31. 1. "REF_TARGET,REF_TARGET" rgroup.long 0x1C++0x03 line.long 0x00 "REF_CNT_ST_SAVED,Signal Frequency Analyser Reference Clock Count Start Saved Register" hexmask.long 0x00 0.--31. 1. "REF_CNT_ST_SAVED,REF_CNT_ST_SAVED" rgroup.long 0x20++0x03 line.long 0x00 "REF_CNT_END_SAVED,Signal Frequency Analyser Reference Clock Count End Saved Register" hexmask.long 0x00 0.--31. 1. "REF_CNT_END_SAVED,REF_CNT_END_SAVED" tree.end repeat.end tree.end tree "SIM (APD_SIM)" tree "SIM_AD" base ad:0x29290000 repeat 2. (strings "0" "1" )(list 0x0 0x4 ) group.long ($2+0x00)++0x03 line.long 0x00 "GPR$1,HW General Purpose Register $1" repeat.end group.long 0x08++0x03 line.long 0x00 "DGO_CTRL0,APD SIM DGO Control Register 0" bitfld.long 0x00 29. "INT_EN_ACK9,DGO General Purpose Register 9 Interrupt Aknowledge (RVBARADDR1)" "0,1" bitfld.long 0x00 28. "INT_EN_ACK8,DGO General Purpose Register 8 Interrupt Aknowledge (RVBARADDR0)" "0,1" newline eventfld.long 0x00 27. "WR_ACK_DGO_GP9,DGO General Purpose Register 9 Write Acknowledge (RVBARADDR1)" "0,1" eventfld.long 0x00 26. "WR_ACK_DGO_GP8,DGO General Purpose Register 8 Write Acknowledge (RVBARADDR0)" "0,1" newline bitfld.long 0x00 25. "UPDATE_DGO_GP9,DGO General Purpose Register 9 Update (RVBARADDR1)" "0,1" bitfld.long 0x00 24. "UPDATE_DGO_GP8,DGO General Purpose Register 8 Update (RVBARADDR0)" "0,1" newline bitfld.long 0x00 23. "INT_EN_ACK7,DGO General Purpose Register 7 Interrupt Aknowledge" "0,1" bitfld.long 0x00 22. "INT_EN_ACK6,DGO General Purpose Register 6 Interrupt Aknowledge" "0,1" newline bitfld.long 0x00 21. "INT_EN_ACK5,DGO General Purpose Register 5 Interrupt Aknowledge" "0,1" bitfld.long 0x00 20. "INT_EN_ACK4,DGO General Purpose Register 4 Interrupt Aknowledge" "0,1" newline bitfld.long 0x00 19. "INT_EN_ACK3,DGO General Purpose Register 3 Interrupt Aknowledge" "0,1" bitfld.long 0x00 18. "INT_EN_ACK2,DGO General Purpose Register 2 Interrupt Aknowledge" "0,1" newline bitfld.long 0x00 17. "INT_EN_ACK1,DGO General Purpose Register 1 Interrupt Aknowledge" "0,1" bitfld.long 0x00 16. "INT_EN_ACK0,DGO General Purpose Register 0 Interrupt Aknowledge" "0,1" newline eventfld.long 0x00 15. "WR_ACK_DGO_GP7,DGO General Purpose Register 7 Write Acknowledge" "0,1" eventfld.long 0x00 14. "WR_ACK_DGO_GP6,DGO General Purpose Register 6 Write Acknowledge" "0,1" newline eventfld.long 0x00 13. "WR_ACK_DGO_GP5,DGO General Purpose Register 5 Write Acknowledge" "0,1" eventfld.long 0x00 12. "WR_ACK_DGO_GP4,DGO General Purpose Register 2 Write Acknowledge" "0,1" newline eventfld.long 0x00 11. "WR_ACK_DGO_GP3,DGO General Purpose Register 3 Write Acknowledge" "0,1" eventfld.long 0x00 10. "WR_ACK_DGO_GP2,DGO General Purpose Register 2 Write Acknowledge" "0,1" newline eventfld.long 0x00 9. "WR_ACK_DGO_GP1,DGO General Purpose Register 1 Write Acknowledge" "0,1" eventfld.long 0x00 8. "WR_ACK_DGO_GP0,DGO General Purpose Register 0 Write Acknowledge" "0,1" newline bitfld.long 0x00 7. "UPDATE_DGO_GP7,DGO General Purpose Register 7 Update" "0,1" bitfld.long 0x00 6. "UPDATE_DGO_GP6,DGO General Purpose Register 6 Update" "0,1" newline bitfld.long 0x00 5. "UPDATE_DGO_GP5,DGO General Purpose Register 5 Update" "0,1" bitfld.long 0x00 4. "UPDATE_DGO_GP4,DGO General Purpose Register 4 Update" "0,1" newline bitfld.long 0x00 3. "UPDATE_DGO_GP3,DGO General Purpose Register 3 Update" "0,1" bitfld.long 0x00 2. "UPDATE_DGO_GP2,DGO General Purpose Register 2 Update" "0,1" newline bitfld.long 0x00 1. "UPDATE_DGO_GP1,DGO General Purpose Register 1 Update" "0,1" bitfld.long 0x00 0. "UPDATE_DGO_GP0,DGO General Purpose Register 0 Update" "0,1" group.long 0x0C++0x03 line.long 0x00 "DGO_CTRL1,APD SIM DGO Control Register 1" bitfld.long 0x00 2. "INT_EN_ACK10,DGO General Purpose Register 10 Interrupt Aknowledge (USB_WAKEUP)" "0,1" eventfld.long 0x00 1. "WR_ACK_DGO_GP10,DGO General Purpose Register 10 Write Acknowledge (USB_WAKEUP)" "0,1" newline bitfld.long 0x00 0. "UPDATE_DGO_GP10,DGO General Purpose Register 10 Update (USB_WAKEUP)" "0,1" group.long 0x10++0x03 line.long 0x00 "DGO_GP0,APD SIM DGO General Purpose Register 0" hexmask.long 0x00 0.--31. 1. "SIM_DGO_GP0,SIM DGO General purpose register 0" group.long 0x14++0x03 line.long 0x00 "DGO_GP1,APD SIM DGO General Purpose Register 1" hexmask.long 0x00 0.--31. 1. "SIM_DGO_GP1,SIM DGO General Purpose Register 1" group.long 0x18++0x03 line.long 0x00 "DGO_GP2,APD SIM DGO General Purpose Register 2" hexmask.long 0x00 0.--31. 1. "SIM_DGO_GP2,SIM DGO General Purpose Register 2" group.long 0x20++0x03 line.long 0x00 "DGO_GP3,RESET1_B pad and Filter Configuration" bitfld.long 0x00 22.--27. "RESET1_B_CONFIG_DFD,Digital Filter Duration by Defining Deglitch Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 21. "RESET1_B_CONFIG_DFCS,Digital Filter Clock Select" "0,1" newline bitfld.long 0x00 20. "RESET1_B_CONFIG_DFE,Digital Filter Enable" "0,1" bitfld.long 0x00 15. "RESET1_B_CONFIG_LK,Locks Writes to This Register" "0,1" newline bitfld.long 0x00 6. "RESET1_B_CONFIG_DSE,Drive Strength Enable" "0,1" bitfld.long 0x00 5. "RESET1_B_CONFIG_ODE,Open Drain Enable" "0,1" newline bitfld.long 0x00 4. "RESET1_B_CONFIG_PFE,Passive Fillter Enable" "0,1" bitfld.long 0x00 2. "RESET1_B_CONFIG_SRE,Slew Rate Enable" "0,1" newline bitfld.long 0x00 1. "RESET1_B_CONFIG_PE,Weak Pull Enable" "0,1" bitfld.long 0x00 0. "RESET1_B_CONFIG_PS,Weak Pull Select" "0,1" group.long 0x24++0x03 line.long 0x00 "DGO_GP4,PTE Operating Range Control" bitfld.long 0x00 0.--1. "PTE_OPERATING_RANGE,PTE Operating Range (Write Once)" "0,1,2,3" group.long 0x28++0x03 line.long 0x00 "DGO_GP5,PTF Operating Range Control" bitfld.long 0x00 0.--1. "PTF_OPERATING_RANGE,PTF Operating Range (Write Once)" "0,1,2,3" group.long 0x30++0x03 line.long 0x00 "SYSCTRL0,Aplication Domain System Control Register 0" eventfld.long 0x00 31. "TSTMR_COMP1_IRQ_CTRL,Controls the Second Compare of CA35 Reset as IRQ" "0,1" bitfld.long 0x00 30. "TSTMR_COMP1_EN,Enables the Compare of CA35 TS Timer Versus Second Programmed Value" "0,1" newline eventfld.long 0x00 29. "TSTMR_COMP0_IRQ_CTRL,Controls the First Compare of CA35 Reset as IRQ" "0,1" bitfld.long 0x00 28. "TSTMR_COMP0_EN,Enables the Compare of CA35 TS Timer Versus The First Programmed Value" "0,1" newline bitfld.long 0x00 27. "TSTMR_SEL,CA35 Timer Select" "0,1" bitfld.long 0x00 17. "AD_SW_RST,Enables Application Domain Software Reset" "0,1" newline bitfld.long 0x00 16. "A35_COLD_RESET,CA35 Cold Reset" "0,1" bitfld.long 0x00 8. "WDOG4_RESET_EN,Watchdog 4 Reset Enable" "0,1" newline rbitfld.long 0x00 6.--7. "A35_SMPEN,Status Register to Indicate Whether a Core is Taking Part in Coherency" "0,1,2,3" bitfld.long 0x00 5. "L2_CACHE_RST_DISABLE,L2 Cache Reset Disable" "0,1" newline bitfld.long 0x00 4. "L2_CACHE_CONTROL,L2 Cache Control" "0,1" group.long 0x3C++0x03 line.long 0x00 "WKPU0_WAKEUP_EN,WKPU0 Wake-up Enable Register" hexmask.long 0x00 0.--31. 1. "WKPU0_WAKEUP_EN,Wake-up Enable Bits for WKPU0 Channels" group.long 0x40++0x03 line.long 0x00 "WKPU1_WAKEUP_EN,WKPU1 Wake-up Enable Register 1" hexmask.long 0x00 0.--31. 1. "WKPU1_WAKEUP_EN,Wake-up Enable Bits for WKPU1 Channels" group.long 0x44++0x03 line.long 0x00 "USB_WAKEUP,USB Wake-up Control Register (DGO 10)" bitfld.long 0x00 5. "USB1_PHY_DPD_WAKEUP_EN,USB1 Deep Power Down Wake-up Enable" "0,1" bitfld.long 0x00 4. "USB0_PHY_DPD_WAKEUP_EN,USB0 Deep Power Down Wake-up Enable" "0,1" newline bitfld.long 0x00 3. "USB1_PHY_NON_DPD_WAKEUP_EN,USB1 Non Deep Power Down Wake-up Enable" "0,1" bitfld.long 0x00 2. "USB0_PHY_NON_DPD_WAKEUP_EN,USB0 Non Deep Power Down Wake-up Enable" "0,1" newline bitfld.long 0x00 1. "USB1_PHY_WAKEUP_ISO_DISABLE,USB1 Wake-up ISO Disable" "0,1" bitfld.long 0x00 0. "USB0_PHY_WAKEUP_ISO_DISABLE,USB0 Wake-up ISO Disable" "0,1" group.long 0x48++0x03 line.long 0x00 "PTD_COMPCELL,PTD Pads Compensation Cell Configuration Register" rbitfld.long 0x00 31. "COMPOK,Compenasantion OK" "0,1" rbitfld.long 0x00 20.--23. "NASRCP,Generated Pads Driver PMOS Transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 16.--19. "NASRCN,Generated Pads Driver NMOS Transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 15. "COMPE,Compensation Status" "0,1" newline bitfld.long 0x00 14. "COMTQ,Compensation TQ" "0,1" bitfld.long 0x00 13. "FREEZE,Enables Freeze Mode" "0,1" newline bitfld.long 0x00 12. "FASTFREEZE,Enables Fast Freeze Mode" "0,1" bitfld.long 0x00 11. "SLEEP,Enables SLEEP mode" "0,1" newline bitfld.long 0x00 4.--7. "RASRCP,Defines Pads Driver PMOS Transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "RASRCN,Defines Pads Driver NMOS Transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4C++0x03 line.long 0x00 "TSTMR_CMP0_VAL_L,Lower CA35 TS Timer First Compare Value" hexmask.long 0x00 0.--31. 1. "TSTMR_CMP_VAL_L,Lower CA35 TS Timer Compare Value" group.long 0x50++0x03 line.long 0x00 "TSTMR_CMP0_VAL_H,Upper CA35 TS Timer First Compare Value" hexmask.long 0x00 0.--31. 1. "TSTMR_CMP_VAL_H,Upper CA35 TS Timer Compare value" group.long 0x54++0x03 line.long 0x00 "TSTMR_CMP1_VAL_L,Lower CA35 TS Timer Second Compare value" hexmask.long 0x00 0.--31. 1. "TSTMR_CMP_VAL_L,Lower CA35 TS Timer Compare Value" group.long 0x58++0x03 line.long 0x00 "TSTMR_CMP1_VAL_H,Upper CA35 TS Timer Second Compare Value" hexmask.long 0x00 0.--31. 1. "TSTMR_CMP_VAL_H,Upper CA35 TS Timer Compare Value" group.long 0x5C++0x03 line.long 0x00 "RVBARADDR0,CA35 Core0 Reset Vector Base Address (DGO 8)" hexmask.long 0x00 0.--31. 1. "RVBARADDR0,CA35 Core0 Reset Vector Base Address" group.long 0x60++0x03 line.long 0x00 "RVBARADDR1,CA35 Core1 Reset Vector Base Address (DGO 9)" hexmask.long 0x00 0.--31. 1. "RVBARADDR1,CA35 Core1 Reset Vector Base Address" group.long 0x64++0x03 line.long 0x00 "MQS1_CF,Medium Quality Sound Configuration Register" bitfld.long 0x00 27. "MQS1_SDATA_SOURCE,MQS1s sdata Input Source Selection" "0,1" bitfld.long 0x00 26. "MQS1_OVERSAMPLE,PWM Oversampling Rate Selection" "0,1" newline bitfld.long 0x00 25. "MQS1_EN,Enables MQS" "0,1" bitfld.long 0x00 24. "MQS1_SW_RST,MQS Software Reset" "0,1" newline hexmask.long.byte 0x00 16.--23. 1. "MQS1_CLK_DIV,Divider Ration Control for mclk from hmclk" group.long 0x68++0x03 line.long 0x00 "SAI_MULTISYNC_ENABLE_SELECTOR,SAI 4 and 5 Trasmiter/Receiver Multi-Synchornous Enable Source" bitfld.long 0x00 8.--9. "SAI5_MULTISYNC_ENABLE_SELECTOR,SAI5 Multi-sync Enable Source" "0,1,2,3" bitfld.long 0x00 0.--1. "SAI4_MULTISYNC_ENABLE_SELECTOR,SAI4 Multi-sync Enable Source" "0,1,2,3" rgroup.long 0x6C++0x03 line.long 0x00 "CORE0_PMU_EVENT,A35 Core0 Performance Monitoring Events" hexmask.long 0x00 0.--29. 1. "CORE0_PMU_EVENT,A35 Core0 PMU EVENT" rgroup.long 0x70++0x03 line.long 0x00 "CORE1_PMU_EVENT,A35 Core1 Performance Monitoring Events" hexmask.long 0x00 0.--29. 1. "CORE1_PMU_EVENT,A35 Core1 PMU EVENT" group.long 0x74++0x03 line.long 0x00 "DGO_GP6,APD SIM DGO General Purpose Register 6" hexmask.long 0x00 0.--31. 1. "SIM_DGO_GP6,SIM DGO General purpose register 6" group.long 0x78++0x03 line.long 0x00 "DGO_GP7,APD SIM DGO General Purpose Register 7" hexmask.long 0x00 0.--31. 1. "SIM_DGO_GP7,SIM DGO General Purpose Register 7" tree.end tree "SIM_LPAV" base ad:0x2DA50000 repeat 2. (strings "0" "1" )(list 0x0 0x4 ) group.long ($2+0x00)++0x03 line.long 0x00 "GPR$1,HW AVD_SIM General Purpose Register $1" repeat.end group.long 0x08++0x03 line.long 0x00 "SYSCTRL0,Audio-Video Domain System Control Register 0" rbitfld.long 0x00 27.--31. "MIPI_DSI_ULPS_ACTIVE,MIPI-DSI ULPS Status Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rbitfld.long 0x00 26. "HIFI4_DSP_DBG_MODE,HiFi4 DSP in OCD Halt or Other Debug Mode" "0,1" newline bitfld.long 0x00 25. "HIFI4_DSP_DBG_RST,Reset HiFi4 DSP Debug Logic" "0,1" bitfld.long 0x00 20.--23. "LPAV_MODULE_DEBUG,Low-Power Audio-Video Mode Debug" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 19. "HIFI4_PLAT_CLK_EN,HiFi4 Platform Clock Enable" "0,1" bitfld.long 0x00 18. "HIFI4_PBCLK_EN,HiFi4 PBCLK Clock Enable" "0,1" newline bitfld.long 0x00 17. "HIFI4_CLK_EN,HiFi4 Clock Enable" "0,1" bitfld.long 0x00 16. "HIFI4_DSP_RST,Controls the HiFi4 DSP Reset" "0,1" newline bitfld.long 0x00 15. "MIPI_DSI_ULPS_PWRUP,Enables MIPI-DSI to Exit ULPS00 gracefully" "0,1" bitfld.long 0x00 14. "HIFI4_DSP_OCD_HALT,Halt HiFi4 DSP Execution into OCD Halt Mode when Processor Comes Out of Reset" "0,1" newline bitfld.long 0x00 13. "HIFI4_DSP_STALL,Stall HIFI4 DSP Execution" "0,1" bitfld.long 0x00 12. "DSI_ALIGN_SW,Configures the DSI-PHY to Enable High Speed Sync Token Alignment" "0,1" newline bitfld.long 0x00 9. "DSI_DPI2_EPDC_DCNANO_MUX_SEL,DSI Source Control" "0,1" bitfld.long 0x00 8. "DSI_CONT_CLK_MODE,DSI Counter Control Mode" "0,1" newline bitfld.long 0x00 5. "DSI_RST_BYTE_N,DSI Reset Byte" "0,1" bitfld.long 0x00 4. "DSI_RST_ESC_N,DSI Reset Escape" "0,1" newline bitfld.long 0x00 3. "DSI_RST_DPI_N,DSI Reset DPI" "0,1" bitfld.long 0x00 2. "DSI_SD,DSI Shutdown Control" "0,1" newline bitfld.long 0x00 1. "DSI_CM,DSI Mode Control" "0,1" group.long 0x14++0x03 line.long 0x00 "LPDDR_CTRL,LPDDR Control Register" eventfld.long 0x00 31. "Q_ALMOST_FULL,Queue Almost Full Status" "0,1" bitfld.long 0x00 30. "Q_ALMOST_FULL_INT_ENABLE,Interrupt Enable for Queue Almost Full Threshold" "0,1" newline bitfld.long 0x00 24. "LPDDR_AUTO_LP_MODE_DISABLE,Automatic Low Power Mode Ackknowledge" "0,1" bitfld.long 0x00 15.--20. "SOC_LP_CMD,Low Power Command Code to Send Requests to LPDDR Controller for Low Power or DFS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 11. "SOC_FREQ_REQ,Frequency Change Request" "0,1" bitfld.long 0x00 9.--10. "SOC_FREQ_COPY,SoC Frequency Copy" "0,1,2,3" newline rbitfld.long 0x00 7. "SOC_FREQ_CHG_REQ,LPDDR Frequency Change Request" "0,1" bitfld.long 0x00 6. "SOC_FREQ_CHG_ACK,LPDDR Frequency Change Acknowledge" "0,1" newline bitfld.long 0x00 5. "ENABLE_HSHK_TIMEOUT,Enables Internal Timeout Counter to be Active" "0,1" rbitfld.long 0x00 4. "LPDDR_DONE,LPDDR Done" "0,1" newline rbitfld.long 0x00 0.--3. "LPDDR_ERROR,LPDDR Error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x03 line.long 0x00 "LPDDR_CTRL2,LPDDR Control Register" bitfld.long 0x00 17. "LPDDR_EN_CLKGATE,LPDDR Enable Clock Gate" "0,1" bitfld.long 0x00 16. "LPDDR_MAX_CLKDIV_EN,LPDDR Maximum Clock Divider Enable" "0,1" newline eventfld.long 0x00 15. "DFS_INTERRUPT,DFS interrupt" "0,1" bitfld.long 0x00 14. "DFS_INT_ENABLE,Enable Interrupt for The DSF handshake" "0,1" newline rbitfld.long 0x00 7. "PHY_FREQ_CHG_REQ,PHY Frequency Change Request" "0,1" bitfld.long 0x00 6. "PHY_FREQ_CHG_ACK,PHY Frequency Change Acknowledge" "0,1" newline rbitfld.long 0x00 0.--4. "PHY_FREQ_TYPE,Code for New System LPDDR4/4x Frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x1C++0x03 line.long 0x00 "DEFAULT_QOS,Default Value Register for Quality of Service (QoS)" bitfld.long 0x00 28.--31. "DEFAULT_EPDC_AR_QOS,Default Value Register for Quality of Service (QoS) AXI Write Channel Corresponding to ISI Y Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "DEFAULT_EPDC_AW_QOS,Default Value Register for Quality of Service (QoS) AXI Read Channel Corresponding to ISI U Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "DEFAULT_ISI_V_AW_QOS,Default Value Register for Quality of Service (QoS) AXI Write Channel Corresponding to ISI U Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "DEFAULT_ISI_V_AR_QOS,Default Value Register for Quality of Service (QoS) AXI Read Channel Corresponding to ISI V Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "DEFAULT_ISI_U_AW_QOS,Default Value Register for Quality of Service (QoS) AXI Read Channel Corresponding to ISI Y Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "DEFAULT_ISI_U_AR_QOS,Default Value Register for Quality of Service (QoS) AXI Write Channel Corresponding to ISI V Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "DEFAULT_ISI_Y_AW_QOS,EPDC Quality of Service (QoS) AXI Write Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "DEFAULT_ISI_Y_AR_QOS,EPDC Default Value Register for Quality of Service (QoS) AXI Read Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x03 line.long 0x00 "PANIC_QOS,Panic Value Register for Quality of Service (QoS)" bitfld.long 0x00 28.--31. "PANIC_EPDC_AR_QOS,EPDC Panic Value Register for Quality of Service (QoS) AXI Read Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "PANIC_EPDC_AW_QOS,EPDC Panic Value Register for Quality of Service (QoS) AXI Write Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 20.--23. "PANIC_ISI_V_AW_QOS,Panic Value Register for Quality of Service (QoS) AXI Write Channel corresponding to ISI V Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PANIC_ISI_V_AR_QOS,Panic Value Register for Quality of Service (QoS) AXI Read Channel corresponding to ISI V Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "PANIC_ISI_U_AW_QOS,Panic Value Register for Quality of Service (QoS) AXI Write Channel Corresponding to ISI U Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "PANIC_ISI_U_AR_QOS,Panic Value Register for Quality of Service (QoS) AXI Read Channel Corresponding to ISI U Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "PANIC_ISI_Y_AW_QOS,Panic Value Register for Quality of Service (QoS) AXI Write Channel Corresponding to ISI Y Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "PANIC_ISI_Y_AR_QOS,Panic Value Register for Quality of Service (QoS) AXI Read Channel Corresponding to ISI Y Buffer Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x03 line.long 0x00 "SAI_MULTISYNC_ENABLE_SELECTOR,SAI 6 and 7 Trasmiter/Receiver Multi-Synchornous Enable Source" bitfld.long 0x00 8.--10. "SAI7_MULTISYNC_ENABLE_SELECTOR,SAI7 Multi-Sync Enable Source" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "SAI6_MULTISYNC_ENABLE_SELECTOR,SAI6 Multi-Sync Enable Source" "0,1,2,3,4,5,6,7" rgroup.long 0x28++0x03 line.long 0x00 "HIFI4_GPR0,HiFi4 DSP General Purpose Register" bitfld.long 0x00 18. "PFAULTINFOVALID,Fault Information Valid" "0,1" bitfld.long 0x00 17. "PFATALERROR,Fatal Error" "0,1" newline bitfld.long 0x00 16. "DOUBLEEXCEPTIONERROR,Double Exception Error" "0,1" rgroup.long 0x2C++0x03 line.long 0x00 "HIFI4_GPR1,HiFi4 DSP General Purpose Register" hexmask.long 0x00 0.--31. 1. "PFAULTINFO,Fault Information Register" rgroup.long 0x30++0x03 line.long 0x00 "HIFI4_GPR2,HiFi4 DSP General Purpose Register" hexmask.long 0x00 0.--31. 1. "TIE_EXPSTATE,GPIO32 Option TIE Output State" group.long 0x34++0x03 line.long 0x00 "AXI_CACHE_OVERRIDE,Audio-Video Domain AXI Cache Override" hexmask.long 0x00 0.--31. 1. "AXI_CACHE_OVERRIDE,Audio-Video Domain AXI Cache Override" tree.end tree "SIM_RTD" base ad:0x2802A000 repeat 2. (strings "0" "1" )(list 0x0 0x4 ) group.long ($2+0x00)++0x03 line.long 0x00 "GPR$1,HW RTD_SIM General Purpose Register $1" repeat.end group.long 0x08++0x03 line.long 0x00 "SYSCTRL0,Realtime Domains System Control Register 0" hexmask.long.word 0x00 16.--25. 1. "FLEXCAN_TICK_FREQ_CONFIG,FlexCAN Timer Frequency Configuration Register" eventfld.long 0x00 3. "CM33_RST_ACK,CM33 Core is in safe state for reset sequencing" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "SYSCTRL1,Realtime Domains System Control Register 0" rgroup.long 0x10++0x03 line.long 0x00 "JTAG_ID_REG,Mirror of JTAG ID Register" bitfld.long 0x00 28.--31. "PRN_PLUG,Part Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 22.--27. "DESIGN_CENTER_IDCODE,Design Center ID Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline hexmask.long.word 0x00 12.--21. 1. "PIN_PLUG,Part Identification Number" hexmask.long.word 0x00 1.--11. 1. "COMPANY_IDCODE,Company ID Code" newline bitfld.long 0x00 0. "JTAG_INIT_BIT,JTAG ID Initial Bit" "0,1" group.long 0x1C++0x03 line.long 0x00 "SSRAM_SAVE_POWER,System Shared RAM Access Disable Register" hexmask.long.byte 0x00 16.--23. 1. "SSRAM_DISABLE_ARRAYS_WORDLINES,System Shared RAM Arrays Wordlines Disable" hexmask.long.byte 0x00 8.--15. 1. "SSRAM_DISABLE_ARRAYS_INPUTS,System Shared RAM Input Gate (IG) Disable" newline hexmask.long.byte 0x00 0.--7. 1. "SSRAM_DISABLE_AUTO_CLOCK_GATING,Disable Automatic Clock Gating" group.long 0x20++0x03 line.long 0x00 "PTC_COMPCELL,Configures PTC Pads Compensation Cell operation" rbitfld.long 0x00 31. "COMPOK,Compenasantion OK" "0,1" rbitfld.long 0x00 20.--23. "NASRCP,Generated Pads Driver PMOS transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 16.--19. "NASRCN,Generated Pads Driver NMOS transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 15. "COMPE,Compensation Status" "0,1" newline bitfld.long 0x00 14. "COMTQ,Compensation TQ" "0,1" bitfld.long 0x00 13. "FREEZE,Enables Freeze Mode" "0,1" newline bitfld.long 0x00 12. "FASTFREEZE,Enables Fast Freeze Mode" "0,1" bitfld.long 0x00 11. "SLEEP,Enables SLEEP Mode" "0,1" newline bitfld.long 0x00 4.--7. "RASRCP,Defines Pads Driver PMOS Transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "RASRCN,Defines Pads Driver NMOS transistors Compensation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x03 line.long 0x00 "MQS0_CF,Medium Quality Sound Configuration Register" bitfld.long 0x00 27. "MQS0_SDATA_SOURCE,MQS1s Sdata Input Source Selection" "0,1" bitfld.long 0x00 26. "MQS0_OVERSAMPLE,PWM Oversampling Rate Selection" "0,1" newline bitfld.long 0x00 25. "MQS0_EN,Enables MQS" "0,1" bitfld.long 0x00 24. "MQS0_SW_RST,MQS Software Reset" "0,1" newline hexmask.long.byte 0x00 16.--23. 1. "MQS0_CLK_DIV,Divider Ration Control for MCLK from HMCLK" group.long 0x28++0x03 line.long 0x00 "M33_CFGNSSTCALIB,Non-Secure SysTick Calibration Configuration" hexmask.long 0x00 0.--25. 1. "CFGNSSTCALIB,Non-Secure SysTick Calibration Configuration" group.long 0x58++0x03 line.long 0x00 "SAI_MULTISYNC_ENABLE_SELECTOR,SAI 0 to 3 Trasmiter/Receiver Multi-Synchornous Enable Source" bitfld.long 0x00 24.--26. "SAI3_MULTISYNC_ENABLE_SELECTOR,SAI3 Multi-sync Enable Source" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. "SAI2_MULTISYNC_ENABLE_SELECTOR,SAI2 Multi-Sync Enable Source" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 8.--10. "SAI1_MULTISYNC_ENABLE_SELECTOR,SAI1 Multi-Sync Enable Source" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. "SAI0_MULTISYNC_ENABLE_SELECTOR,SAI0 Multi-sync Enable Source" "0,1,2,3,4,5,6,7" tree.end tree.end tree "SPDIF (Sony/Philips Digital Interface)" base ad:0x2DAB0000 group.long 0x00++0x03 line.long 0x00 "SCR,SPDIF Configuration Register" bitfld.long 0x00 25. "RXCChannel_192b_en,RXCChannel_192b_en" "0: SPDIF receives only 48 bits of 192 C bits..,1: SPDIF receives 192 bits of C in audio stream" newline bitfld.long 0x00 24. "TXCChannel_192b_en,TXCChannel_192b_en" "0: SPDIF transmits 48 bits of C in audio stream,1: SPDIF transmits 192 bits of C in audio stream" newline bitfld.long 0x00 23. "RxFIFO_Ctrl,RxFIFO_Ctrl" "0: Normal operation,1: Always read zero from Rx data register" newline bitfld.long 0x00 22. "RxFIFO_Off_On,RxFIFO_Off_On" "0: SPDIF Rx FIFO is on,1: SPDIF Rx FIFO is off" newline bitfld.long 0x00 21. "RxFIFO_Rst,RxFIFO_Rst" "0: Normal operation,1: Reset register to 1 sample remaining" newline bitfld.long 0x00 19.--20. "RxFIFOFull_Sel,RxFIFOFull_Sel" "0: Full interrupt if at least 1 sample in Rx..,1: Full interrupt if at least 4 sample in Rx..,2: Full interrupt if at least 8 sample in Rx..,3: Full interrupt if at least 16 sample in Rx.." newline bitfld.long 0x00 18. "RxAutoSync,RxAutoSync" "0: Rx FIFO auto sync off,1: RxFIFO auto sync on" newline bitfld.long 0x00 17. "TxAutoSync,TxAutoSync" "0: Tx FIFO auto sync off,1: Tx FIFO auto sync on" newline bitfld.long 0x00 15.--16. "TxFIFOEmpty_Sel,TxFIFOEmpty_Sel" "0: Empty interrupt if 0 sample in Tx left and..,1: Empty interrupt if at most 4 sample in Tx..,2: Empty interrupt if at most 8 sample in Tx..,3: Empty interrupt if at most 12 sample in Tx.." newline bitfld.long 0x00 14. "RAW_CAPTURE_MODE,RAW_CAPTURE_MODE" "0,1" newline bitfld.long 0x00 13. "LOW_POWER,LOW_POWER" "0,1" newline bitfld.long 0x00 12. "soft_reset,soft_reset" "0,1" newline bitfld.long 0x00 10.--11. "TxFIFO_Ctrl,TxFIFO_Ctrl" "0: Send out digital zero on SPDIF Tx,1: Tx Normal operation,2: Reset to 1 sample remaining,?..." newline bitfld.long 0x00 9. "DMA_Rx_En,DMA_Rx_En" "0,1" newline bitfld.long 0x00 8. "DMA_TX_En,DMA_TX_En" "0,1" newline bitfld.long 0x00 6.--7. "InputSrcSel,InputSrcSel" "0: spdif_in1,1: spdif_in2,2: spdif_in3,3: spdif_in4" newline bitfld.long 0x00 5. "ValCtrl,ValCtrl" "0: Outgoing Validity always set,1: Outgoing Validity always clear" newline bitfld.long 0x00 2.--4. "TxSel,TxSel" "0: Off and output 0,1: Feed-through SPDIF_IN1,2: Feed-through SPDIF_IN2,3: Feed-through SPDIF_IN3,4: Feed-through SPDIF_IN4,5: Tx Normal operation - From SPDIF Tx Block,?..." newline bitfld.long 0x00 0.--1. "USrc_Sel,USrc_Sel" "0: No embedded U channel,1: U channel from SPDIF receive block (CD mode),?,3: U channel from on chip transmitter" group.long 0x04++0x03 line.long 0x00 "SRCD,CDText Control Register" bitfld.long 0x00 1. "USyncMode,USyncMode" "0: Non-CD data,1: CD user channel subcode" group.long 0x08++0x03 line.long 0x00 "SRPC,PhaseConfig Register" bitfld.long 0x00 7.--10. "ClkSrc_Sel,ClkSrc_Sel" "0: if (DPLL Locked) SPDIF_RxClk else REF_CLK_32K..,1: if (DPLL Locked) SPDIF_RxClk else tx_clk..,?,3: if (DPLL Locked) SPDIF_RxClk else SPDIF_EXT_CLK,?,5: REF_CLK_32K (XTALOSC),6: tx_clk (SPDIF0_CLK_ROOT),?,8: clksrc_0b1000,?..." newline rbitfld.long 0x00 6. "LOCK,LOCK" "0,1" newline bitfld.long 0x00 3.--5. "GainSel,GainSel" "0: gainsel_0b000,1: gainsel_0b001,2: gainsel_0b010,3: gainsel_0b011,4: gainsel_0b100,5: gainsel_0b101,6: gainsel_0b110,?..." group.long 0x0C++0x03 line.long 0x00 "SIE,InterruptEn Register" bitfld.long 0x00 20. "Lock,Lock" "0,1" newline bitfld.long 0x00 19. "TxUnOv,TxUnOv" "0,1" newline bitfld.long 0x00 18. "TxResyn,TxResyn" "0,1" newline bitfld.long 0x00 17. "CNew,CNew" "0,1" newline bitfld.long 0x00 16. "ValNoGood,ValNoGood" "0,1" newline bitfld.long 0x00 15. "SymErr,SymErr" "0,1" newline bitfld.long 0x00 14. "BitErr,BitErr" "0,1" newline bitfld.long 0x00 10. "URxFul,URxFul" "0,1" newline bitfld.long 0x00 9. "URxOv,URxOv" "0,1" newline bitfld.long 0x00 8. "QRxFul,QRxFul" "0,1" newline bitfld.long 0x00 7. "QRxOv,QRxOv" "0,1" newline bitfld.long 0x00 6. "UQSync,UQSync" "0,1" newline bitfld.long 0x00 5. "UQErr,UQErr" "0,1" newline bitfld.long 0x00 4. "RxFIFOUnOv,RxFIFOUnOv" "0,1" newline bitfld.long 0x00 3. "RxFIFOResyn,RxFIFOResyn" "0,1" newline bitfld.long 0x00 2. "LockLoss,LockLoss" "0,1" newline bitfld.long 0x00 1. "TxEm,TxEm" "0,1" newline bitfld.long 0x00 0. "RxFIFOFul,RxFIFOFul" "0,1" group.long 0x10++0x03 line.long 0x00 "SIS,InterruptStat Register" eventfld.long 0x00 20. "Lock,Lock" "0,1" newline eventfld.long 0x00 19. "TxUnOv,TxUnOv" "0,1" newline eventfld.long 0x00 18. "TxResyn,TxResyn" "0,1" newline eventfld.long 0x00 17. "CNew,CNew" "0,1" newline eventfld.long 0x00 16. "ValNoGood,ValNoGood" "0,1" newline eventfld.long 0x00 15. "SymErr,SymErr" "0,1" newline eventfld.long 0x00 14. "BitErr,BitErr" "0,1" newline eventfld.long 0x00 10. "URxFul,URxFul" "0,1" newline eventfld.long 0x00 9. "URxOv,URxOv" "0,1" newline eventfld.long 0x00 8. "QRxFul,QRxFul" "0,1" newline eventfld.long 0x00 7. "QRxOv,QRxOv" "0,1" newline eventfld.long 0x00 6. "UQSync,UQSync" "0,1" newline eventfld.long 0x00 5. "UQErr,UQErr" "0,1" newline eventfld.long 0x00 4. "RxFIFOUnOv,RxFIFOUnOv" "0,1" newline eventfld.long 0x00 3. "RxFIFOResyn,RxFIFOResyn" "0,1" newline eventfld.long 0x00 2. "LockLoss,LockLoss" "0,1" newline eventfld.long 0x00 1. "TxEm,TxEm" "0,1" newline eventfld.long 0x00 0. "RxFIFOFul,RxFIFOFul" "0,1" rgroup.long 0x14++0x03 line.long 0x00 "SRL,SPDIFRxLeft Register" hexmask.long.tbyte 0x00 0.--23. 1. "RxDataLeft,RxDataLeft" rgroup.long 0x18++0x03 line.long 0x00 "SRR,SPDIFRxRight Register" hexmask.long.tbyte 0x00 0.--23. 1. "RxDataRight,RxDataRight" rgroup.long 0x1C++0x03 line.long 0x00 "SRCSH,SPDIFRxCChannel_h Register" hexmask.long.tbyte 0x00 0.--23. 1. "RxCChannel_h,RxCChannel_h" rgroup.long 0x20++0x03 line.long 0x00 "SRCSL,SPDIFRxCChannel_l Register" hexmask.long.tbyte 0x00 0.--23. 1. "RxCChannel_l,RxCChannel_l" rgroup.long 0x24++0x03 line.long 0x00 "SRU,UchannelRx Register" hexmask.long.tbyte 0x00 0.--23. 1. "RxUChannel,RxUChannel" rgroup.long 0x28++0x03 line.long 0x00 "SRQ,QchannelRx Register" hexmask.long.tbyte 0x00 0.--23. 1. "RxQChannel,RxQChannel" wgroup.long 0x2C++0x03 line.long 0x00 "STL,SPDIFTxLeft Register" hexmask.long.tbyte 0x00 0.--23. 1. "TxDataLeft,TxDataLeft" wgroup.long 0x30++0x03 line.long 0x00 "STR,SPDIFTxRight Register" hexmask.long.tbyte 0x00 0.--23. 1. "TxDataRight,TxDataRight" group.long 0x34++0x03 line.long 0x00 "STCSCH,SPDIFTxCChannelCons_h Register" hexmask.long.tbyte 0x00 0.--23. 1. "TxCChannelCons_h,TxCChannelCons_h" group.long 0x38++0x03 line.long 0x00 "STCSCL,SPDIFTxCChannelCons_l Register" hexmask.long.tbyte 0x00 0.--23. 1. "TxCChannelCons_l,TxCChannelCons_l" group.long 0x3C++0x03 line.long 0x00 "SPDIFTxCChannel_Prof_H,SPDIF transmit Professional C channel register bits 24-31" hexmask.long.byte 0x00 0.--7. 1. "TxCChannel_Prof_H,TxCChannel_Prof_H" group.long 0x40++0x03 line.long 0x00 "SPDIFTxCChannel_Prof_L,SPDIF transmit Professional C channel register bits 0-23" hexmask.long.tbyte 0x00 0.--23. 1. "TxCChannel_Prof_L,TxCChannel_Prof_L" rgroup.long 0x44++0x03 line.long 0x00 "SRFM,FreqMeas Register" hexmask.long.tbyte 0x00 0.--23. 1. "FreqMeas,FreqMeas" group.long 0x50++0x03 line.long 0x00 "STC,SPDIFTxClk Register" hexmask.long.word 0x00 11.--19. 1. "SYSCLK_DF,SYSCLK_DF" newline bitfld.long 0x00 8.--10. "TxClk_Source,TxClk_Source" "0: REF_CLK_32K input (XTALOSC 32 kHz clock),1: tx_clk input (from SPDIF0_CLK_ROOT. See clock..,?,3: SPDIF_EXT_CLK from pads,?,5: ipg_clk input (frequency divided),?..." newline bitfld.long 0x00 7. "tx_all_clk_en,tx_all_clk_en" "0: disable transfer clock,1: enable transfer clock" newline hexmask.long.byte 0x00 0.--6. 1. "TxClk_DF,TxClk_DF" rgroup.long 0x60++0x03 line.long 0x00 "SPDIFRxCChannel_Addr_31_0,SPDIF receive C channel register bits 31-0" hexmask.long 0x00 0.--31. 1. "RxCChannel_Addr_31_0,RxCChannel_Addr_31_0" rgroup.long 0x64++0x03 line.long 0x00 "SPDIFRxCChannel_Addr_63_32,SPDIF receive C channel register bits 63-32" hexmask.long 0x00 0.--31. 1. "RxCChannel_Addr_63_32,RxCChannel_Addr_63_32" rgroup.long 0x68++0x03 line.long 0x00 "SPDIFRxCChannel_Addr_95_64,SPDIF receive C channel register bits 95-64" hexmask.long 0x00 0.--31. 1. "RxCChannel_Addr_95_64,RxCChannel_Addr_95_64" rgroup.long 0x6C++0x03 line.long 0x00 "SPDIFRxCChannel_Addr_127_96,SPDIF receive C channel register bits 127-96" hexmask.long 0x00 0.--31. 1. "RxCChannel_Addr_127_96,RxCChannel_Addr_127_96" rgroup.long 0x70++0x03 line.long 0x00 "SPDIFRxCChannel_Addr_159_128,SPDIF receive C channel register bits 159-128" hexmask.long 0x00 0.--31. 1. "RxCChannel_Addr_159_128,RxCChannel_Addr_159_128" rgroup.long 0x74++0x03 line.long 0x00 "SPDIFRxCChannel_Addr_191_160,SPDIF receive C channel register bits 191-160" hexmask.long 0x00 0.--31. 1. "RxCChannel_Addr_191_160,RxCChannel_Addr_191_160" group.long 0x78++0x03 line.long 0x00 "SPDIFTxCChannel_Addr_31_0,SPDIF transmit C channel register bits 31-0" hexmask.long 0x00 0.--31. 1. "TxCChannel_Addr_31_0,TxCChannel_Addr_31_0" group.long 0x7C++0x03 line.long 0x00 "SPDIFTxCChannel_Addr_63_32,SPDIF transmit C channel register bits 63-32" hexmask.long 0x00 0.--31. 1. "TxCChannel_Addr_63_32,TxCChannel_Addr_63_32" group.long 0x80++0x03 line.long 0x00 "SPDIFTxCChannel_Addr_95_64,SPDIF transmit C channel register bits 95-64" hexmask.long 0x00 0.--31. 1. "TxCChannel_Addr_95_64,TxCChannel_Addr_95_64" group.long 0x84++0x03 line.long 0x00 "SPDIFTxCChannel_Addr_127_96,SPDIF transmit C channel register bits 127-96" hexmask.long 0x00 0.--31. 1. "TxCChannel_Addr_127_96,TxCChannel_Addr_127_96" group.long 0x88++0x03 line.long 0x00 "SPDIFTxCChannel_Addr_159_128,SPDIF transmit C channel register bits 159-128" hexmask.long 0x00 0.--31. 1. "TxCChannel_Addr_159_128,TxCChannel_Addr_159_128" group.long 0x8C++0x03 line.long 0x00 "SPDIFTxCChannel_Addr_191_160,SPDIF transmit C channel register bits 191-160" hexmask.long 0x00 0.--31. 1. "TxCChannel_Addr_191_160,TxCChannel_Addr_191_160" tree.end tree "SYSPM" repeat 2. (list 0. 1.) (list ad:0x28026000 ad:0x29270000) tree "SYSPM$1" base $2 sif cpuis("IMX8UD3-CM33") repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x0 0x4 0x8 0xC 0x10 0x14 ) rgroup.long ($2+0x00)++0x03 line.long 0x00 "CFGSS$1,Configuration $1" hexmask.long.byte 0x00 24.--31. 1. "MSC,Miscellaneous" hexmask.long.byte 0x00 16.--23. 1. "NCTRS,Number of Counters" newline hexmask.long.byte 0x00 8.--15. 1. "HRL,Hardware revision level" hexmask.long.byte 0x00 0.--7. 1. "ID,Identifier" repeat.end endif repeat 4. (increment 0 1)(increment 0 0x100) tree "PMCR[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x200)++0x03 line.long 0x00 "PMCR,Performance Monitor Control Register" hexmask.long.byte 0x00 25.--31. 1. "SELEVT3,Select Event 3" hexmask.long.byte 0x00 18.--24. 1. "SELEVT2,Select Event 2" newline hexmask.long.byte 0x00 11.--17. 1. "SELEVT1,Select Event 1" bitfld.long 0x00 10. "RECTR3,Reset Event Counter 3" "0,1" newline bitfld.long 0x00 9. "RECTR2,Reset Event Counter 2" "0,1" bitfld.long 0x00 8. "RECTR1,Reset Event Counter 1" "0,1" newline bitfld.long 0x00 7. "RICTR,Reset Instruction Counter" "0,1" bitfld.long 0x00 6. "DCIFSH,Disable Counters if Stopped or Halted" "0,1" newline bitfld.long 0x00 4.--5. "CMODE,Count Mode" "0,1,2,3" bitfld.long 0x00 1.--3. "SSC,Start/Stop Control (same as PSAM_CR)" "0,1,2,3,4,5,6,7" newline rbitfld.long 0x00 0. "MENB,Module is Enabled" "0,1" rgroup.byte ($2+0x210)++0x00 line.byte 0x00 "PMICTR_HI,Performance Monitor Instruction Counter" hexmask.byte 0x00 0.--7. 1. "ICTR,Instruction counter" rgroup.long ($2+0x214)++0x03 line.long 0x00 "PMICTR_LO,Performance Monitor Instruction Counter" hexmask.long 0x00 0.--31. 1. "ICTR,Instruction counter" endif tree "PMECTR[0]" sif cpuis("IMX8UD3-CM33") rgroup.byte ($2+0x218)++0x00 line.byte 0x00 "PMECTR_HI_,Performance Monitor Event Counter" hexmask.byte 0x00 0.--7. 1. "ECTR,Event Counter" rgroup.long ($2+0x21C)++0x03 line.long 0x00 "PMECTR_LO_,Performance Monitor Event Counter" hexmask.long 0x00 0.--31. 1. "ECTR,Event Counter" endif tree.end tree "PMECTR[1]" sif cpuis("IMX8UD3-CM33") rgroup.byte ($2+0x220)++0x00 line.byte 0x00 "PMECTR_HI_,Performance Monitor Event Counter" hexmask.byte 0x00 0.--7. 1. "ECTR,Event Counter" rgroup.long ($2+0x224)++0x03 line.long 0x00 "PMECTR_LO_,Performance Monitor Event Counter" hexmask.long 0x00 0.--31. 1. "ECTR,Event Counter" endif tree.end tree "PMECTR[2]" sif cpuis("IMX8UD3-CM33") rgroup.byte ($2+0x228)++0x00 line.byte 0x00 "PMECTR_HI_,Performance Monitor Event Counter" hexmask.byte 0x00 0.--7. 1. "ECTR,Event Counter" rgroup.long ($2+0x22C)++0x03 line.long 0x00 "PMECTR_LO_,Performance Monitor Event Counter" hexmask.long 0x00 0.--31. 1. "ECTR,Event Counter" endif tree.end tree.end repeat.end tree.end repeat.end tree.end tree "TPM" tree "TPM0" base ad:0x28095000 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x00 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x00 0.--7. 1. "CHAN,Channel Count" group.long 0x08++0x03 line.long 0x00 "GLOBAL,TPM Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "NOUPDATE,No Update" "0: Internal double buffered registers update as..,1: Internal double buffered registers do not.." group.long 0x10++0x03 line.long 0x00 "SC,Status and Control" bitfld.long 0x00 8. "DMA,DMA Enable" "0: Disables DMA transfers,1: Enables DMA transfers" eventfld.long 0x00 7. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" newline bitfld.long 0x00 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable TOF interrupts,1: Enable TOF interrupts" bitfld.long 0x00 5. "CPWMS,Center-Aligned PWM Select" "0: TPM counter operates in up counting mode,1: TPM counter operates in up-down counting mode" newline bitfld.long 0x00 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter..,2: TPM counter increments on rising edge of..,3: TPM counter increments on rising edge of the.." bitfld.long 0x00 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" group.long 0x14++0x03 line.long 0x00 "CNT,Counter" hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value" group.long 0x18++0x03 line.long 0x00 "MOD,Modulo" hexmask.long.word 0x00 0.--15. 1. "MOD,Modulo value" group.long 0x1C++0x03 line.long 0x00 "STATUS,Capture and Compare Status" eventfld.long 0x00 8. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" eventfld.long 0x00 5. "CH5F,Channel 5 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 4. "CH4F,Channel 4 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 3. "CH3F,Channel 3 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 2. "CH2F,Channel 2 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 1. "CH1F,Channel 1 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 0. "CH0F,Channel 0 Flag" "0: No channel event has occurred,1: A channel event has occurred" group.long 0x64++0x03 line.long 0x00 "COMBINE,Combine Channel Register" bitfld.long 0x00 17. "COMSWAP2,Combine Channels 4 and 5 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 16. "COMBINE2,Combine Channels 4 and 5" "0: Channels 4 and 5 are independent,1: Channels 4 and 5 are combined" newline bitfld.long 0x00 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 8. "COMBINE1,Combine Channels 2 and 3" "0: Channels 2 and 3 are independent,1: Channels 2 and 3 are combined" newline bitfld.long 0x00 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 0. "COMBINE0,Combine Channels 0 and 1" "0: Channels 0 and 1 are independent,1: Channels 0 and 1 are combined" group.long 0x6C++0x03 line.long 0x00 "TRIG,Channel Trigger" bitfld.long 0x00 5. "TRIG5,Channel 5 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 4. "TRIG4,Channel 4 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." group.long 0x70++0x03 line.long 0x00 "POL,Channel Polarity" bitfld.long 0x00 5. "POL5,Channel 5 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 4. "POL4,Channel 4 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 3. "POL3,Channel 3 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 2. "POL2,Channel 2 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 1. "POL1,Channel 1 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 0. "POL0,Channel 0 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" group.long 0x78++0x03 line.long 0x00 "FILTER,Filter Control" bitfld.long 0x00 20.--23. "CH5FVAL,Channel 5 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "CH4FVAL,Channel 4 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "CH3FVAL,Channel 3 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "CH2FVAL,Channel 2 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "CH1FVAL,Channel 1 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CH0FVAL,Channel 0 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x00 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x00 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Counter direction is decreasing (counter..,1: Counter direction is increasing (counter.." newline rbitfld.long 0x00 1. "TOFDIR,TOFDIR" "0: TOF bit was set on the bottom of counting,1: TOF bit was set on the top of counting" bitfld.long 0x00 0. "QUADEN,QUADEN" "0: Quadrature decoder mode is disabled,1: Quadrature decoder mode is enabled" group.long 0x84++0x03 line.long 0x00 "CONF,Configuration" bitfld.long 0x00 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or Channel 1 pin input capture" bitfld.long 0x00 23. "TRGSRC,Trigger Source" "0: Trigger source selected by TRGSEL is external,1: Trigger source selected by TRGSEL is internal.." newline bitfld.long 0x00 22. "TRGPOL,Trigger Polarity" "0: Trigger is active high,1: Trigger is active low" bitfld.long 0x00 19. "CPOT,Counter Pause On Trigger" "0,1" newline bitfld.long 0x00 18. "CROT,Counter Reload On Trigger" "0: Counter is not reloaded due to a rising edge..,1: Counter is reloaded when a rising edge is.." bitfld.long 0x00 17. "CSOO,Counter Stop On Overflow" "0: TPM counter continues incrementing or..,1: TPM counter stops incrementing or.." newline bitfld.long 0x00 16. "CSOT,Counter Start on Trigger" "0: TPM counter starts to increment immediately..,1: TPM counter only starts to increment when it.." bitfld.long 0x00 9. "GTBEEN,Global time base enable" "0: All channels use the internally generated TPM..,1: All channels use an externally generated.." newline bitfld.long 0x00 8. "GTBSYNC,Global Time Base Synchronization" "0: Global timebase synchronization disabled,1: Global timebase synchronization enabled" bitfld.long 0x00 6.--7. "DBGMODE,Debug Mode" "0: TPM counter is paused and does not increment..,?,?,3: TPM counter continues in debug mode" newline bitfld.long 0x00 5. "DOZEEN,Doze Enable" "0: Internal TPM counter continues in Doze mode,1: Internal TPM counter is paused and does not.." endif repeat 6. (increment 0 1)(increment 0 0x8) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "CSC,Channel (n) Status and Control" eventfld.long 0x00 7. "CHF,Channel Flag" "0: No channel event has occurred,1: A channel event has occurred" bitfld.long 0x00 6. "CHIE,Channel Interrupt Enable" "0: Disable channel interrupts,1: Enable channel interrupts" newline bitfld.long 0x00 5. "MSB,Channel Mode Select" "0,1" bitfld.long 0x00 4. "MSA,Channel Mode Select" "0,1" newline bitfld.long 0x00 3. "ELSB,Edge or Level Select" "0,1" bitfld.long 0x00 2. "ELSA,Edge or Level Select" "0,1" newline bitfld.long 0x00 0. "DMA,DMA Enable" "0: Disable DMA transfers,1: Enable DMA transfers" group.long ($2+0x24)++0x03 line.long 0x00 "CV,Channel (n) Value" hexmask.long.word 0x00 0.--15. 1. "VAL,Channel Value" endif tree.end repeat.end tree.end repeat 2. (list 1. 2.) (list ad:0x28096000 ad:0x28105000) tree "TPM$1" base $2 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x00 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x00 0.--7. 1. "CHAN,Channel Count" group.long 0x08++0x03 line.long 0x00 "GLOBAL,TPM Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "NOUPDATE,No Update" "0: Internal double buffered registers update as..,1: Internal double buffered registers do not.." group.long 0x10++0x03 line.long 0x00 "SC,Status and Control" bitfld.long 0x00 8. "DMA,DMA Enable" "0: Disables DMA transfers,1: Enables DMA transfers" eventfld.long 0x00 7. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" newline bitfld.long 0x00 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable TOF interrupts,1: Enable TOF interrupts" bitfld.long 0x00 5. "CPWMS,Center-Aligned PWM Select" "0: TPM counter operates in up counting mode,1: TPM counter operates in up-down counting mode" newline bitfld.long 0x00 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter..,2: TPM counter increments on rising edge of..,3: TPM counter increments on rising edge of the.." bitfld.long 0x00 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" group.long 0x14++0x03 line.long 0x00 "CNT,Counter" hexmask.long 0x00 0.--31. 1. "COUNT,Counter value" group.long 0x18++0x03 line.long 0x00 "MOD,Modulo" hexmask.long 0x00 0.--31. 1. "MOD,Modulo value" group.long 0x1C++0x03 line.long 0x00 "STATUS,Capture and Compare Status" eventfld.long 0x00 8. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" eventfld.long 0x00 1. "CH1F,Channel 1 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 0. "CH0F,Channel 0 Flag" "0: No channel event has occurred,1: A channel event has occurred" group.long 0x64++0x03 line.long 0x00 "COMBINE,Combine Channel Register" bitfld.long 0x00 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 0. "COMBINE0,Combine Channels 0 and 1" "0: Channels 0 and 1 are independent,1: Channels 0 and 1 are combined" group.long 0x6C++0x03 line.long 0x00 "TRIG,Channel Trigger" bitfld.long 0x00 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." group.long 0x70++0x03 line.long 0x00 "POL,Channel Polarity" bitfld.long 0x00 1. "POL1,Channel 1 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 0. "POL0,Channel 0 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" group.long 0x78++0x03 line.long 0x00 "FILTER,Filter Control" bitfld.long 0x00 4.--7. "CH1FVAL,Channel 1 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CH0FVAL,Channel 0 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x00 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x00 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Counter direction is decreasing (counter..,1: Counter direction is increasing (counter.." newline rbitfld.long 0x00 1. "TOFDIR,TOFDIR" "0: TOF bit was set on the bottom of counting,1: TOF bit was set on the top of counting" bitfld.long 0x00 0. "QUADEN,QUADEN" "0: Quadrature decoder mode is disabled,1: Quadrature decoder mode is enabled" group.long 0x84++0x03 line.long 0x00 "CONF,Configuration" bitfld.long 0x00 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or Channel 1 pin input capture" bitfld.long 0x00 23. "TRGSRC,Trigger Source" "0: Trigger source selected by TRGSEL is external,1: Trigger source selected by TRGSEL is internal.." newline bitfld.long 0x00 22. "TRGPOL,Trigger Polarity" "0: Trigger is active high,1: Trigger is active low" bitfld.long 0x00 19. "CPOT,Counter Pause On Trigger" "0,1" newline bitfld.long 0x00 18. "CROT,Counter Reload On Trigger" "0: Counter is not reloaded due to a rising edge..,1: Counter is reloaded when a rising edge is.." bitfld.long 0x00 17. "CSOO,Counter Stop On Overflow" "0: TPM counter continues incrementing or..,1: TPM counter stops incrementing or.." newline bitfld.long 0x00 16. "CSOT,Counter Start on Trigger" "0: TPM counter starts to increment immediately..,1: TPM counter only starts to increment when it.." bitfld.long 0x00 9. "GTBEEN,Global time base enable" "0: All channels use the internally generated TPM..,1: All channels use an externally generated.." newline bitfld.long 0x00 8. "GTBSYNC,Global Time Base Synchronization" "0: Global timebase synchronization disabled,1: Global timebase synchronization enabled" bitfld.long 0x00 6.--7. "DBGMODE,Debug Mode" "0: TPM counter is paused and does not increment..,?,?,3: TPM counter continues in debug mode" newline bitfld.long 0x00 5. "DOZEEN,Doze Enable" "0: Internal TPM counter continues in Doze mode,1: Internal TPM counter is paused and does not.." endif repeat 2. (increment 0 1)(increment 0 0x8) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "CSC,Channel (n) Status and Control" eventfld.long 0x00 7. "CHF,Channel Flag" "0: No channel event has occurred,1: A channel event has occurred" bitfld.long 0x00 6. "CHIE,Channel Interrupt Enable" "0: Disable channel interrupts,1: Enable channel interrupts" newline bitfld.long 0x00 5. "MSB,Channel Mode Select" "0,1" bitfld.long 0x00 4. "MSA,Channel Mode Select" "0,1" newline bitfld.long 0x00 3. "ELSB,Edge or Level Select" "0,1" bitfld.long 0x00 2. "ELSA,Edge or Level Select" "0,1" newline bitfld.long 0x00 0. "DMA,DMA Enable" "0: Disable DMA transfers,1: Enable DMA transfers" group.long ($2+0x24)++0x03 line.long 0x00 "CV,Channel (n) Value" hexmask.long 0x00 0.--31. 1. "VAL,Channel Value" endif tree.end repeat.end tree.end repeat.end repeat 2. (list 3. 4.) (list ad:0x28106000 ad:0x29330000) tree "TPM$1" base $2 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x00 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x00 0.--7. 1. "CHAN,Channel Count" group.long 0x08++0x03 line.long 0x00 "GLOBAL,TPM Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "NOUPDATE,No Update" "0: Internal double buffered registers update as..,1: Internal double buffered registers do not.." group.long 0x10++0x03 line.long 0x00 "SC,Status and Control" bitfld.long 0x00 8. "DMA,DMA Enable" "0: Disables DMA transfers,1: Enables DMA transfers" eventfld.long 0x00 7. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" newline bitfld.long 0x00 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable TOF interrupts,1: Enable TOF interrupts" bitfld.long 0x00 5. "CPWMS,Center-Aligned PWM Select" "0: TPM counter operates in up counting mode,1: TPM counter operates in up-down counting mode" newline bitfld.long 0x00 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter..,2: TPM counter increments on rising edge of..,3: TPM counter increments on rising edge of the.." bitfld.long 0x00 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" group.long 0x14++0x03 line.long 0x00 "CNT,Counter" hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value" group.long 0x18++0x03 line.long 0x00 "MOD,Modulo" hexmask.long.word 0x00 0.--15. 1. "MOD,Modulo value" group.long 0x1C++0x03 line.long 0x00 "STATUS,Capture and Compare Status" eventfld.long 0x00 8. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" eventfld.long 0x00 5. "CH5F,Channel 5 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 4. "CH4F,Channel 4 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 3. "CH3F,Channel 3 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 2. "CH2F,Channel 2 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 1. "CH1F,Channel 1 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 0. "CH0F,Channel 0 Flag" "0: No channel event has occurred,1: A channel event has occurred" group.long 0x64++0x03 line.long 0x00 "COMBINE,Combine Channel Register" bitfld.long 0x00 17. "COMSWAP2,Combine Channels 4 and 5 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 16. "COMBINE2,Combine Channels 4 and 5" "0: Channels 4 and 5 are independent,1: Channels 4 and 5 are combined" newline bitfld.long 0x00 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 8. "COMBINE1,Combine Channels 2 and 3" "0: Channels 2 and 3 are independent,1: Channels 2 and 3 are combined" newline bitfld.long 0x00 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 0. "COMBINE0,Combine Channels 0 and 1" "0: Channels 0 and 1 are independent,1: Channels 0 and 1 are combined" group.long 0x6C++0x03 line.long 0x00 "TRIG,Channel Trigger" bitfld.long 0x00 5. "TRIG5,Channel 5 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 4. "TRIG4,Channel 4 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." group.long 0x70++0x03 line.long 0x00 "POL,Channel Polarity" bitfld.long 0x00 5. "POL5,Channel 5 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 4. "POL4,Channel 4 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 3. "POL3,Channel 3 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 2. "POL2,Channel 2 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 1. "POL1,Channel 1 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 0. "POL0,Channel 0 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" group.long 0x78++0x03 line.long 0x00 "FILTER,Filter Control" bitfld.long 0x00 20.--23. "CH5FVAL,Channel 5 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "CH4FVAL,Channel 4 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "CH3FVAL,Channel 3 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "CH2FVAL,Channel 2 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "CH1FVAL,Channel 1 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CH0FVAL,Channel 0 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x00 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x00 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Counter direction is decreasing (counter..,1: Counter direction is increasing (counter.." newline rbitfld.long 0x00 1. "TOFDIR,TOFDIR" "0: TOF bit was set on the bottom of counting,1: TOF bit was set on the top of counting" bitfld.long 0x00 0. "QUADEN,QUADEN" "0: Quadrature decoder mode is disabled,1: Quadrature decoder mode is enabled" group.long 0x84++0x03 line.long 0x00 "CONF,Configuration" bitfld.long 0x00 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or Channel 1 pin input capture" bitfld.long 0x00 23. "TRGSRC,Trigger Source" "0: Trigger source selected by TRGSEL is external,1: Trigger source selected by TRGSEL is internal.." newline bitfld.long 0x00 22. "TRGPOL,Trigger Polarity" "0: Trigger is active high,1: Trigger is active low" bitfld.long 0x00 19. "CPOT,Counter Pause On Trigger" "0,1" newline bitfld.long 0x00 18. "CROT,Counter Reload On Trigger" "0: Counter is not reloaded due to a rising edge..,1: Counter is reloaded when a rising edge is.." bitfld.long 0x00 17. "CSOO,Counter Stop On Overflow" "0: TPM counter continues incrementing or..,1: TPM counter stops incrementing or.." newline bitfld.long 0x00 16. "CSOT,Counter Start on Trigger" "0: TPM counter starts to increment immediately..,1: TPM counter only starts to increment when it.." bitfld.long 0x00 9. "GTBEEN,Global time base enable" "0: All channels use the internally generated TPM..,1: All channels use an externally generated.." newline bitfld.long 0x00 8. "GTBSYNC,Global Time Base Synchronization" "0: Global timebase synchronization disabled,1: Global timebase synchronization enabled" bitfld.long 0x00 6.--7. "DBGMODE,Debug Mode" "0: TPM counter is paused and does not increment..,?,?,3: TPM counter continues in debug mode" newline bitfld.long 0x00 5. "DOZEEN,Doze Enable" "0: Internal TPM counter continues in Doze mode,1: Internal TPM counter is paused and does not.." endif repeat 6. (increment 0 1)(increment 0 0x8) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "CSC,Channel (n) Status and Control" eventfld.long 0x00 7. "CHF,Channel Flag" "0: No channel event has occurred,1: A channel event has occurred" bitfld.long 0x00 6. "CHIE,Channel Interrupt Enable" "0: Disable channel interrupts,1: Enable channel interrupts" newline bitfld.long 0x00 5. "MSB,Channel Mode Select" "0,1" bitfld.long 0x00 4. "MSA,Channel Mode Select" "0,1" newline bitfld.long 0x00 3. "ELSB,Edge or Level Select" "0,1" bitfld.long 0x00 2. "ELSA,Edge or Level Select" "0,1" newline bitfld.long 0x00 0. "DMA,DMA Enable" "0: Disable DMA transfers,1: Enable DMA transfers" group.long ($2+0x24)++0x03 line.long 0x00 "CV,Channel (n) Value" hexmask.long.word 0x00 0.--15. 1. "VAL,Channel Value" endif tree.end repeat.end tree.end repeat.end repeat 2. (list 5. 6.) (list ad:0x29340000 ad:0x29820000) tree "TPM$1" base $2 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x00 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x00 0.--7. 1. "CHAN,Channel Count" group.long 0x08++0x03 line.long 0x00 "GLOBAL,TPM Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "NOUPDATE,No Update" "0: Internal double buffered registers update as..,1: Internal double buffered registers do not.." group.long 0x10++0x03 line.long 0x00 "SC,Status and Control" bitfld.long 0x00 8. "DMA,DMA Enable" "0: Disables DMA transfers,1: Enables DMA transfers" eventfld.long 0x00 7. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" newline bitfld.long 0x00 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable TOF interrupts,1: Enable TOF interrupts" bitfld.long 0x00 5. "CPWMS,Center-Aligned PWM Select" "0: TPM counter operates in up counting mode,1: TPM counter operates in up-down counting mode" newline bitfld.long 0x00 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter..,2: TPM counter increments on rising edge of..,3: TPM counter increments on rising edge of the.." bitfld.long 0x00 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" group.long 0x14++0x03 line.long 0x00 "CNT,Counter" hexmask.long 0x00 0.--31. 1. "COUNT,Counter value" group.long 0x18++0x03 line.long 0x00 "MOD,Modulo" hexmask.long 0x00 0.--31. 1. "MOD,Modulo value" group.long 0x1C++0x03 line.long 0x00 "STATUS,Capture and Compare Status" eventfld.long 0x00 8. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" eventfld.long 0x00 1. "CH1F,Channel 1 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 0. "CH0F,Channel 0 Flag" "0: No channel event has occurred,1: A channel event has occurred" group.long 0x64++0x03 line.long 0x00 "COMBINE,Combine Channel Register" bitfld.long 0x00 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 0. "COMBINE0,Combine Channels 0 and 1" "0: Channels 0 and 1 are independent,1: Channels 0 and 1 are combined" group.long 0x6C++0x03 line.long 0x00 "TRIG,Channel Trigger" bitfld.long 0x00 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." group.long 0x70++0x03 line.long 0x00 "POL,Channel Polarity" bitfld.long 0x00 1. "POL1,Channel 1 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 0. "POL0,Channel 0 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" group.long 0x78++0x03 line.long 0x00 "FILTER,Filter Control" bitfld.long 0x00 4.--7. "CH1FVAL,Channel 1 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CH0FVAL,Channel 0 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x00 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x00 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Counter direction is decreasing (counter..,1: Counter direction is increasing (counter.." newline rbitfld.long 0x00 1. "TOFDIR,TOFDIR" "0: TOF bit was set on the bottom of counting,1: TOF bit was set on the top of counting" bitfld.long 0x00 0. "QUADEN,QUADEN" "0: Quadrature decoder mode is disabled,1: Quadrature decoder mode is enabled" group.long 0x84++0x03 line.long 0x00 "CONF,Configuration" bitfld.long 0x00 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or Channel 1 pin input capture" bitfld.long 0x00 23. "TRGSRC,Trigger Source" "0: Trigger source selected by TRGSEL is external,1: Trigger source selected by TRGSEL is internal.." newline bitfld.long 0x00 22. "TRGPOL,Trigger Polarity" "0: Trigger is active high,1: Trigger is active low" bitfld.long 0x00 19. "CPOT,Counter Pause On Trigger" "0,1" newline bitfld.long 0x00 18. "CROT,Counter Reload On Trigger" "0: Counter is not reloaded due to a rising edge..,1: Counter is reloaded when a rising edge is.." bitfld.long 0x00 17. "CSOO,Counter Stop On Overflow" "0: TPM counter continues incrementing or..,1: TPM counter stops incrementing or.." newline bitfld.long 0x00 16. "CSOT,Counter Start on Trigger" "0: TPM counter starts to increment immediately..,1: TPM counter only starts to increment when it.." bitfld.long 0x00 9. "GTBEEN,Global time base enable" "0: All channels use the internally generated TPM..,1: All channels use an externally generated.." newline bitfld.long 0x00 8. "GTBSYNC,Global Time Base Synchronization" "0: Global timebase synchronization disabled,1: Global timebase synchronization enabled" bitfld.long 0x00 6.--7. "DBGMODE,Debug Mode" "0: TPM counter is paused and does not increment..,?,?,3: TPM counter continues in debug mode" newline bitfld.long 0x00 5. "DOZEEN,Doze Enable" "0: Internal TPM counter continues in Doze mode,1: Internal TPM counter is paused and does not.." endif repeat 2. (increment 0 1)(increment 0 0x8) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "CSC,Channel (n) Status and Control" eventfld.long 0x00 7. "CHF,Channel Flag" "0: No channel event has occurred,1: A channel event has occurred" bitfld.long 0x00 6. "CHIE,Channel Interrupt Enable" "0: Disable channel interrupts,1: Enable channel interrupts" newline bitfld.long 0x00 5. "MSB,Channel Mode Select" "0,1" bitfld.long 0x00 4. "MSA,Channel Mode Select" "0,1" newline bitfld.long 0x00 3. "ELSB,Edge or Level Select" "0,1" bitfld.long 0x00 2. "ELSA,Edge or Level Select" "0,1" newline bitfld.long 0x00 0. "DMA,DMA Enable" "0: Disable DMA transfers,1: Enable DMA transfers" group.long ($2+0x24)++0x03 line.long 0x00 "CV,Channel (n) Value" hexmask.long 0x00 0.--31. 1. "VAL,Channel Value" endif tree.end repeat.end tree.end repeat.end tree "TPM7" base ad:0x29830000 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x00 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x00 0.--7. 1. "CHAN,Channel Count" group.long 0x08++0x03 line.long 0x00 "GLOBAL,TPM Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "NOUPDATE,No Update" "0: Internal double buffered registers update as..,1: Internal double buffered registers do not.." group.long 0x10++0x03 line.long 0x00 "SC,Status and Control" bitfld.long 0x00 8. "DMA,DMA Enable" "0: Disables DMA transfers,1: Enables DMA transfers" eventfld.long 0x00 7. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" newline bitfld.long 0x00 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable TOF interrupts,1: Enable TOF interrupts" bitfld.long 0x00 5. "CPWMS,Center-Aligned PWM Select" "0: TPM counter operates in up counting mode,1: TPM counter operates in up-down counting mode" newline bitfld.long 0x00 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter..,2: TPM counter increments on rising edge of..,3: TPM counter increments on rising edge of the.." bitfld.long 0x00 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" group.long 0x14++0x03 line.long 0x00 "CNT,Counter" hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value" group.long 0x18++0x03 line.long 0x00 "MOD,Modulo" hexmask.long.word 0x00 0.--15. 1. "MOD,Modulo value" group.long 0x1C++0x03 line.long 0x00 "STATUS,Capture and Compare Status" eventfld.long 0x00 8. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" eventfld.long 0x00 5. "CH5F,Channel 5 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 4. "CH4F,Channel 4 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 3. "CH3F,Channel 3 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 2. "CH2F,Channel 2 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 1. "CH1F,Channel 1 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 0. "CH0F,Channel 0 Flag" "0: No channel event has occurred,1: A channel event has occurred" group.long 0x64++0x03 line.long 0x00 "COMBINE,Combine Channel Register" bitfld.long 0x00 17. "COMSWAP2,Combine Channels 4 and 5 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 16. "COMBINE2,Combine Channels 4 and 5" "0: Channels 4 and 5 are independent,1: Channels 4 and 5 are combined" newline bitfld.long 0x00 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 8. "COMBINE1,Combine Channels 2 and 3" "0: Channels 2 and 3 are independent,1: Channels 2 and 3 are combined" newline bitfld.long 0x00 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 0. "COMBINE0,Combine Channels 0 and 1" "0: Channels 0 and 1 are independent,1: Channels 0 and 1 are combined" group.long 0x6C++0x03 line.long 0x00 "TRIG,Channel Trigger" bitfld.long 0x00 5. "TRIG5,Channel 5 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 4. "TRIG4,Channel 4 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." group.long 0x70++0x03 line.long 0x00 "POL,Channel Polarity" bitfld.long 0x00 5. "POL5,Channel 5 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 4. "POL4,Channel 4 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 3. "POL3,Channel 3 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 2. "POL2,Channel 2 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 1. "POL1,Channel 1 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 0. "POL0,Channel 0 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" group.long 0x78++0x03 line.long 0x00 "FILTER,Filter Control" bitfld.long 0x00 20.--23. "CH5FVAL,Channel 5 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "CH4FVAL,Channel 4 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "CH3FVAL,Channel 3 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "CH2FVAL,Channel 2 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "CH1FVAL,Channel 1 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CH0FVAL,Channel 0 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x00 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x00 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Counter direction is decreasing (counter..,1: Counter direction is increasing (counter.." newline rbitfld.long 0x00 1. "TOFDIR,TOFDIR" "0: TOF bit was set on the bottom of counting,1: TOF bit was set on the top of counting" bitfld.long 0x00 0. "QUADEN,QUADEN" "0: Quadrature decoder mode is disabled,1: Quadrature decoder mode is enabled" group.long 0x84++0x03 line.long 0x00 "CONF,Configuration" bitfld.long 0x00 24.--25. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or Channel 1 pin input capture" bitfld.long 0x00 23. "TRGSRC,Trigger Source" "0: Trigger source selected by TRGSEL is external,1: Trigger source selected by TRGSEL is internal.." newline bitfld.long 0x00 22. "TRGPOL,Trigger Polarity" "0: Trigger is active high,1: Trigger is active low" bitfld.long 0x00 19. "CPOT,Counter Pause On Trigger" "0,1" newline bitfld.long 0x00 18. "CROT,Counter Reload On Trigger" "0: Counter is not reloaded due to a rising edge..,1: Counter is reloaded when a rising edge is.." bitfld.long 0x00 17. "CSOO,Counter Stop On Overflow" "0: TPM counter continues incrementing or..,1: TPM counter stops incrementing or.." newline bitfld.long 0x00 16. "CSOT,Counter Start on Trigger" "0: TPM counter starts to increment immediately..,1: TPM counter only starts to increment when it.." bitfld.long 0x00 9. "GTBEEN,Global time base enable" "0: All channels use the internally generated TPM..,1: All channels use an externally generated.." newline bitfld.long 0x00 8. "GTBSYNC,Global Time Base Synchronization" "0: Global timebase synchronization disabled,1: Global timebase synchronization enabled" bitfld.long 0x00 6.--7. "DBGMODE,Debug Mode" "0: TPM counter is paused and does not increment..,?,?,3: TPM counter continues in debug mode" newline bitfld.long 0x00 5. "DOZEEN,Doze Enable" "0: Internal TPM counter continues in Doze mode,1: Internal TPM counter is paused and does not.." endif repeat 6. (increment 0 1)(increment 0 0x8) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "CSC,Channel (n) Status and Control" eventfld.long 0x00 7. "CHF,Channel Flag" "0: No channel event has occurred,1: A channel event has occurred" bitfld.long 0x00 6. "CHIE,Channel Interrupt Enable" "0: Disable channel interrupts,1: Enable channel interrupts" newline bitfld.long 0x00 5. "MSB,Channel Mode Select" "0,1" bitfld.long 0x00 4. "MSA,Channel Mode Select" "0,1" newline bitfld.long 0x00 3. "ELSB,Edge or Level Select" "0,1" bitfld.long 0x00 2. "ELSA,Edge or Level Select" "0,1" newline bitfld.long 0x00 0. "DMA,DMA Enable" "0: Disable DMA transfers,1: Enable DMA transfers" group.long ($2+0x24)++0x03 line.long 0x00 "CV,Channel (n) Value" hexmask.long.word 0x00 0.--15. 1. "VAL,Channel Value" endif tree.end repeat.end tree.end tree "TPM8" base ad:0x2DA80000 sif cpuis("IMX8UD3-CM33") rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID Register" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Identification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter Register" hexmask.long.byte 0x00 16.--23. 1. "WIDTH,Counter Width" hexmask.long.byte 0x00 8.--15. 1. "TRIG,Trigger Count" newline hexmask.long.byte 0x00 0.--7. 1. "CHAN,Channel Count" group.long 0x08++0x03 line.long 0x00 "GLOBAL,TPM Global Register" bitfld.long 0x00 1. "RST,Software Reset" "0: Module is not reset,1: Module is reset" bitfld.long 0x00 0. "NOUPDATE,No Update" "0: Internal double buffered registers update as..,1: Internal double buffered registers do not.." group.long 0x10++0x03 line.long 0x00 "SC,Status and Control" bitfld.long 0x00 8. "DMA,DMA Enable" "0: Disables DMA transfers,1: Enables DMA transfers" eventfld.long 0x00 7. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" newline bitfld.long 0x00 6. "TOIE,Timer Overflow Interrupt Enable" "0: Disable TOF interrupts,1: Enable TOF interrupts" bitfld.long 0x00 5. "CPWMS,Center-Aligned PWM Select" "0: TPM counter operates in up counting mode,1: TPM counter operates in up-down counting mode" newline bitfld.long 0x00 3.--4. "CMOD,Clock Mode Selection" "0: TPM counter is disabled,1: TPM counter increments on every TPM counter..,2: TPM counter increments on rising edge of..,3: TPM counter increments on rising edge of the.." bitfld.long 0x00 0.--2. "PS,Prescale Factor Selection" "0: Divide by 1,1: Divide by 2,2: Divide by 4,3: Divide by 8,4: Divide by 16,5: Divide by 32,6: Divide by 64,7: Divide by 128" group.long 0x14++0x03 line.long 0x00 "CNT,Counter" hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value" group.long 0x18++0x03 line.long 0x00 "MOD,Modulo" hexmask.long.word 0x00 0.--15. 1. "MOD,Modulo value" group.long 0x1C++0x03 line.long 0x00 "STATUS,Capture and Compare Status" eventfld.long 0x00 8. "TOF,Timer Overflow Flag" "0: TPM counter has not overflowed,1: TPM counter has overflowed" eventfld.long 0x00 5. "CH5F,Channel 5 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 4. "CH4F,Channel 4 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 3. "CH3F,Channel 3 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 2. "CH2F,Channel 2 Flag" "0: No channel event has occurred,1: A channel event has occurred" eventfld.long 0x00 1. "CH1F,Channel 1 Flag" "0: No channel event has occurred,1: A channel event has occurred" newline eventfld.long 0x00 0. "CH0F,Channel 0 Flag" "0: No channel event has occurred,1: A channel event has occurred" group.long 0x64++0x03 line.long 0x00 "COMBINE,Combine Channel Register" bitfld.long 0x00 17. "COMSWAP2,Combine Channels 4 and 5 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 16. "COMBINE2,Combine Channels 4 and 5" "0: Channels 4 and 5 are independent,1: Channels 4 and 5 are combined" newline bitfld.long 0x00 9. "COMSWAP1,Combine Channels 2 and 3 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 8. "COMBINE1,Combine Channels 2 and 3" "0: Channels 2 and 3 are independent,1: Channels 2 and 3 are combined" newline bitfld.long 0x00 1. "COMSWAP0,Combine Channel 0 and 1 Swap" "0: Even channel is used for input capture and..,1: Odd channel is used for input capture and 1st.." bitfld.long 0x00 0. "COMBINE0,Combine Channels 0 and 1" "0: Channels 0 and 1 are independent,1: Channels 0 and 1 are combined" group.long 0x6C++0x03 line.long 0x00 "TRIG,Channel Trigger" bitfld.long 0x00 5. "TRIG5,Channel 5 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 4. "TRIG4,Channel 4 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 3. "TRIG3,Channel 3 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 2. "TRIG2,Channel 2 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." newline bitfld.long 0x00 1. "TRIG1,Channel 1 Trigger" "0: No effect,1: Configures trigger input 1 to be used by.." bitfld.long 0x00 0. "TRIG0,Channel 0 Trigger" "0: No effect,1: Configures trigger input 0 to be used by.." group.long 0x70++0x03 line.long 0x00 "POL,Channel Polarity" bitfld.long 0x00 5. "POL5,Channel 5 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 4. "POL4,Channel 4 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 3. "POL3,Channel 3 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 2. "POL2,Channel 2 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" newline bitfld.long 0x00 1. "POL1,Channel 1 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" bitfld.long 0x00 0. "POL0,Channel 0 Polarity" "0: The channel polarity is active high,1: The channel polarity is active low" group.long 0x78++0x03 line.long 0x00 "FILTER,Filter Control" bitfld.long 0x00 20.--23. "CH5FVAL,Channel 5 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "CH4FVAL,Channel 4 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "CH3FVAL,Channel 3 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "CH2FVAL,Channel 2 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "CH1FVAL,Channel 1 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CH0FVAL,Channel 0 Filter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x03 line.long 0x00 "QDCTRL,Quadrature Decoder Control and Status" bitfld.long 0x00 3. "QUADMODE,Quadrature Decoder Mode" "0: Phase encoding mode,1: Count and direction encoding mode" rbitfld.long 0x00 2. "QUADIR,Counter Direction in Quadrature Decode Mode" "0: Counter direction is decreasing (counter..,1: Counter direction is increasing (counter.." newline rbitfld.long 0x00 1. "TOFDIR,TOFDIR" "0: TOF bit was set on the bottom of counting,1: TOF bit was set on the top of counting" bitfld.long 0x00 0. "QUADEN,QUADEN" "0: Quadrature decoder mode is disabled,1: Quadrature decoder mode is enabled" group.long 0x84++0x03 line.long 0x00 "CONF,Configuration" bitfld.long 0x00 24.--26. "TRGSEL,Trigger Select" "?,1: Channel 0 pin input capture,2: Channel 1 pin input capture,3: Channel 0 or Channel 1 pin input capture,4: Channel 2 pin input capture,5: Channel 0 or Channel 2 pin input capture,6: Channel 1 or Channel 2 pin input capture,7: Channel 0 or Channel 1 or Channel 2 pin input.." bitfld.long 0x00 23. "TRGSRC,Trigger Source" "0: Trigger source selected by TRGSEL is external,1: Trigger source selected by TRGSEL is internal.." newline bitfld.long 0x00 22. "TRGPOL,Trigger Polarity" "0: Trigger is active high,1: Trigger is active low" bitfld.long 0x00 19. "CPOT,Counter Pause On Trigger" "0,1" newline bitfld.long 0x00 18. "CROT,Counter Reload On Trigger" "0: Counter is not reloaded due to a rising edge..,1: Counter is reloaded when a rising edge is.." bitfld.long 0x00 17. "CSOO,Counter Stop On Overflow" "0: TPM counter continues incrementing or..,1: TPM counter stops incrementing or.." newline bitfld.long 0x00 16. "CSOT,Counter Start on Trigger" "0: TPM counter starts to increment immediately..,1: TPM counter only starts to increment when it.." bitfld.long 0x00 9. "GTBEEN,Global time base enable" "0: All channels use the internally generated TPM..,1: All channels use an externally generated.." newline bitfld.long 0x00 8. "GTBSYNC,Global Time Base Synchronization" "0: Global timebase synchronization disabled,1: Global timebase synchronization enabled" bitfld.long 0x00 6.--7. "DBGMODE,Debug Mode" "0: TPM counter is paused and does not increment..,?,?,3: TPM counter continues in debug mode" newline bitfld.long 0x00 5. "DOZEEN,Doze Enable" "0: Internal TPM counter continues in Doze mode,1: Internal TPM counter is paused and does not.." endif repeat 6. (increment 0 1)(increment 0 0x8) tree "CHANNEL[$1]" sif cpuis("IMX8UD3-CM33") group.long ($2+0x20)++0x03 line.long 0x00 "CSC,Channel (n) Status and Control" eventfld.long 0x00 7. "CHF,Channel Flag" "0: No channel event has occurred,1: A channel event has occurred" bitfld.long 0x00 6. "CHIE,Channel Interrupt Enable" "0: Disable channel interrupts,1: Enable channel interrupts" newline bitfld.long 0x00 5. "MSB,Channel Mode Select" "0,1" bitfld.long 0x00 4. "MSA,Channel Mode Select" "0,1" newline bitfld.long 0x00 3. "ELSB,Edge or Level Select" "0,1" bitfld.long 0x00 2. "ELSA,Edge or Level Select" "0,1" newline bitfld.long 0x00 0. "DMA,DMA Enable" "0: Disable DMA transfers,1: Enable DMA transfers" group.long ($2+0x24)++0x03 line.long 0x00 "CV,Channel (n) Value" hexmask.long.word 0x00 0.--15. 1. "VAL,Channel Value" endif tree.end repeat.end tree.end tree.end tree "TRDC" base ad:0x28031000 sif cpuis("IMX8UD3-CM33") group.long 0x00++0x03 line.long 0x00 "TRDC_CR,TRDC Register" rbitfld.long 0x00 30. "LK1,Lock Status" "0: The CR can be written by any secure privileged,1: The CR is locked (read-only) until the next.." rbitfld.long 0x00 16.--19. "DBDS,Deny by Default (DBD) Status" "0: Not in Deny by Default window,?,?,?,?,?,?,?,8: Deny by default and (S400 + CA35 SecPriv..,9: Deny by default and (S400 + CM33 allowed),10: Deny by default and (S400 + CM33 SecPriv..,11: Deny by default and (S400 + CM33 SecPriv +..,12: Deny by default and (S400 allowed),?,14: All accesses denied,15: All accesses denied" newline bitfld.long 0x00 15. "GVLDR,Global Valid for Memory Region Checkers" "0: TRDC MRCs are disabled,1: TRDC MRCs are enabled" bitfld.long 0x00 14. "GVLDB,Global Valid for Memory Block Checkers" "0: TRDC MBCs are disabled,1: TRDC MBCs are enabled" newline rbitfld.long 0x00 1.--4. "HRL,Hardware Revision Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "GVLDM,Global Valid for Domain Assignment Controllers" "0: TRDC DACs are disabled,1: TRDC DACs are enabled" rgroup.long 0xF0++0x03 line.long 0x00 "TRDC_HWCFG0,Hardware Configuration Register 0" bitfld.long 0x00 28.--31. "MID,Module ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "NMRC,Number of MRCs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--18. "NMBC,Number of MBCs" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 8.--15. 1. "NMSTR,Number of bus masters" newline bitfld.long 0x00 0.--3. "NDID,Number of domains" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xF4++0x03 line.long 0x00 "TRDC_HWCFG1,TRDC Hardware Configuration Register 1" bitfld.long 0x00 0.--2. "DID,Domain identifier number" "0,1,2,3,4,5,6,7" repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 ) rgroup.byte ($2+0x100)++0x00 line.byte 0x00 "DACFG$1,Domain Assignment Configuration Register" bitfld.byte 0x00 7. "NCM,Non-CPU Master" "0: Bus master is a processor,1: Bus master is a non-processor" bitfld.byte 0x00 0.--3. "NMDAR,Number of master domain assignment registers for bus master m" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end rgroup.long 0x140++0x03 line.long 0x00 "MBC0_CFG0,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV1_BLKSZL2,Block size log2 in slave 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV1_NMBLK,Number of blocks in slave 1" newline bitfld.long 0x00 10.--14. "SLV0_BLKSZL2,Block size log2 in slave 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV0_NMBLK,Number of blocks in slave 0" rgroup.long 0x144++0x03 line.long 0x00 "MBC0_CFG1,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV3_BLKSZL2,Block size log2 in slave 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV3_NMBLK,Number of blocks in slave 3" newline bitfld.long 0x00 10.--14. "SLV2_BLKSZL2,Block size log2 in slave 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV2_NMBLK,Number of blocks in slave 2" rgroup.long 0x148++0x03 line.long 0x00 "MBC1_CFG0,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV1_BLKSZL2,Block size log2 in slave 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV1_NMBLK,Number of blocks in slave 1" newline bitfld.long 0x00 10.--14. "SLV0_BLKSZL2,Block size log2 in slave 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV0_NMBLK,Number of blocks in slave 0" rgroup.long 0x14C++0x03 line.long 0x00 "MBC1_CFG1,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV3_BLKSZL2,Block size log2 in slave 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV3_NMBLK,Number of blocks in slave 3" newline bitfld.long 0x00 10.--14. "SLV2_BLKSZL2,Block size log2 in slave 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV2_NMBLK,Number of blocks in slave 2" rgroup.long 0x150++0x03 line.long 0x00 "MBC2_CFG0,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV1_BLKSZL2,Block size log2 in slave 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV1_NMBLK,Number of blocks in slave 1" newline bitfld.long 0x00 10.--14. "SLV0_BLKSZL2,Block size log2 in slave 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV0_NMBLK,Number of blocks in slave 0" rgroup.long 0x154++0x03 line.long 0x00 "MBC2_CFG1,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV3_BLKSZL2,Block size log2 in slave 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV3_NMBLK,Number of blocks in slave 3" newline bitfld.long 0x00 10.--14. "SLV2_BLKSZL2,Block size log2 in slave 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV2_NMBLK,Number of blocks in slave 2" rgroup.long 0x158++0x03 line.long 0x00 "MBC3_CFG0,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV1_BLKSZL2,Block size log2 in slave 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV1_NMBLK,Number of blocks in slave 1" newline bitfld.long 0x00 10.--14. "SLV0_BLKSZL2,Block size log2 in slave 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV0_NMBLK,Number of blocks in slave 0" rgroup.long 0x15C++0x03 line.long 0x00 "MBC3_CFG1,Memory Block Configuration Register" bitfld.long 0x00 26.--30. "SLV3_BLKSZL2,Block size log2 in slave 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 16.--25. 1. "SLV3_NMBLK,Number of blocks in slave 3" newline bitfld.long 0x00 10.--14. "SLV2_BLKSZL2,Block size log2 in slave 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "SLV2_NMBLK,Number of blocks in slave 2" repeat 8. (strings "0" "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 ) rgroup.byte ($2+0x160)++0x00 line.byte 0x00 "MRCFG$1,Memory Region Configuration Register" bitfld.byte 0x00 0.--4. "NMRGD,Number of memory region descriptors for memory region checker n" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0x1C0++0x03 line.long 0x00 "TRDC_IDAU_CR,TRDC IDAU Control Register" rbitfld.long 0x00 31. "PCURRNS,Processor current security" "0: Processor is in Secure state,1: Processor is in Nonsecure state" bitfld.long 0x00 12. "LKSAU,Lock SAU" "0: Unlock these registers,1: Disable writes to the SAU_CTRL SAU_RNR.." newline bitfld.long 0x00 11. "LKNSMPU,Lock Nonsecure MPU" "0: Unlock these registers,1: Disable writes to the MPU_CTRL_NS MPU_RNR_NS.." bitfld.long 0x00 10. "LKSMPU,Lock Secure MPU" "0: Unlock these registers,1: Disable writes to the MPU_CTRL MPU_RNR.." newline bitfld.long 0x00 9. "LKNSVTOR,Lock Nonsecure Vector Table Offset Register" "0: Unlock this register,1: Disable writes to the VTOR_NS register" bitfld.long 0x00 8. "LKSVTAIRCR,Lock Secure VTOR Application interrupt and Reset Control Registers" "0: Unlock these registers,1: Disable writes to the VTOR_S AIRCR[PRIS] and.." newline rbitfld.long 0x00 6. "SAUDIS,Security Attribution Unit Disable" "0: SAU is enabled,1: SAU is disabled" rbitfld.long 0x00 5. "MPUNSDIS,NonSecure Memory Protection Unit Disabled" "0: Nonsecure MPU is enabled,1: Nonsecure MPU is disabled" newline rbitfld.long 0x00 4. "MPUSDIS,Secure Memory Protection Unit Disabled" "0: Secure MPU is enabled,1: Secure MPU is disabled" rbitfld.long 0x00 3. "CFGSECEXT,Configure Security Extension" "0: ARMv8M Security Extension is disabled,1: ARMv8-M Security Extension is enabled" newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x1E0++0x03 line.long 0x00 "TRDC_FLW_CTL,TRDC FLW Control" bitfld.long 0x00 31. "V,Valid bit" "0: FLW function is disabled,1: FLW function is enabled" bitfld.long 0x00 30. "LK,Lock bit" "0: FLW register may be modified,1: FLW registers are locked until the next reset" rgroup.long 0x1E4++0x03 line.long 0x00 "TRDC_FLW_PBASE,TRDC FLW Physical Base" hexmask.long.tbyte 0x00 15.--31. 1. "PBASE,Physical base address" group.long 0x1E8++0x03 line.long 0x00 "TRDC_FLW_ABASE,TRDC FLW Array Base" hexmask.long.tbyte 0x00 15.--31. 1. "ABASE,Array base address" group.long 0x1EC++0x03 line.long 0x00 "TRDC_FLW_BCNT,TRDC FLW Block Count" hexmask.long.word 0x00 0.--14. 1. "BCNT,Block Count" group.long 0x1FC++0x03 line.long 0x00 "TRDC_FDID,TRDC Fault Domain ID" bitfld.long 0x00 0.--3. "FDID,Domain ID of Faulted Access" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat 8. (increment 0 1) (increment 0 0x04) group.long ($2+0x200)++0x03 line.long 0x00 "TRDC_DERRLOC[$1],TRDC Domain Error Location Register $1" hexmask.long.byte 0x00 16.--23. 1. "MRCINST,MRC instance" bitfld.long 0x00 12.--15. "mbc3_err_slv,MBC3 ERROR SLAVE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "mbc2_err_slv,MBC2 ERROR SLAVE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. "mbc1_err_slv,MBC1 ERROR SLAVE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "mbc0_err_slv,MBC0 ERROR SLAVE" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end group.long 0x800++0x03 line.long 0x00 "MDA_W0_0_DFMT0,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 14.--15. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." newline bitfld.long 0x00 4.--5. "DIDS,DID Select" "0: Use MDAm[3:0] as the domain identifier,1: Use the input DID as the domain identifier,2: Use MDAm[3:2] concatenated with the low-order..,?..." bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x820++0x03 line.long 0x00 "MDA_W0_1_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x840++0x03 line.long 0x00 "MDA_W0_2_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x860++0x03 line.long 0x00 "MDA_W0_3_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x880++0x03 line.long 0x00 "MDA_W0_4_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8A0++0x03 line.long 0x00 "MDA_W0_5_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8C0++0x03 line.long 0x00 "MDA_W0_6_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8E0++0x03 line.long 0x00 "MDA_W0_7_DFMT1,DAC Master Domain Assignment Register" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1000++0x03 line.long 0x00 "MBC0_MEM0_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x1004++0x03 line.long 0x00 "MBC0_MEM1_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x1008++0x03 line.long 0x00 "MBC0_MEM2_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x100C++0x03 line.long 0x00 "MBC0_MEM3_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" group.long 0x1010++0x03 line.long 0x00 "MBC0_NSE_BLK_INDEX,MBC NonSecure Enable Block Index" bitfld.long 0x00 31. "AI,Auto Increment" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" newline bitfld.long 0x00 8.--11. "MEM_SEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2.--5. "WNDX,Word index into the block NSE bitmap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1014++0x03 line.long 0x00 "MBC0_NSE_BLK_SET,MBC NonSecure Enable Block Set" hexmask.long 0x00 0.--31. 1. "W1SET,Write 1 Set" group.long 0x1018++0x03 line.long 0x00 "MBC0_NSE_BLK_CLR,MBC NonSecure Enable Block Clear" hexmask.long 0x00 0.--31. 1. "W1CLR,Write 1 Clear" group.long 0x101C++0x03 line.long 0x00 "MBC0_NSE_BLK_CLR_ALL,MBC NonSecure Enable Block Clear All" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" bitfld.long 0x00 8.--11. "MEMSEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1020++0x03 line.long 0x00 "MBC0_MEMN_GLBAC0,MBC Global Access Control" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." newline bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" newline bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" newline bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." newline bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" newline bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x1024)++0x03 line.long 0x00 "MBC0_MEMN_GLBAC$1,MBC Global Access Control" bitfld.long 0x00 31. "LK,LOCK" "0: This register is not locked and can be altered,1: This register is locked and cannot be altered" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" newline bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" newline bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." newline bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" newline bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat.end group.long 0x1040++0x03 line.long 0x00 "MBC0_DOM0_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1140++0x03 line.long 0x00 "MBC0_DOM0_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1180)++0x03 line.long 0x00 "MBC0_DOM0_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x11A0++0x03 line.long 0x00 "MBC0_DOM0_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x11A8)++0x03 line.long 0x00 "MBC0_DOM0_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x11C8++0x03 line.long 0x00 "MBC0_DOM0_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x11D0++0x03 line.long 0x00 "MBC0_DOM0_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x11F0++0x03 line.long 0x00 "MBC0_DOM0_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1240++0x03 line.long 0x00 "MBC0_DOM1_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1340++0x03 line.long 0x00 "MBC0_DOM1_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1380)++0x03 line.long 0x00 "MBC0_DOM1_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x13A0++0x03 line.long 0x00 "MBC0_DOM1_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x13A8)++0x03 line.long 0x00 "MBC0_DOM1_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x13C8++0x03 line.long 0x00 "MBC0_DOM1_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x13D0++0x03 line.long 0x00 "MBC0_DOM1_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x13F0++0x03 line.long 0x00 "MBC0_DOM1_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1440++0x03 line.long 0x00 "MBC0_DOM2_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1540++0x03 line.long 0x00 "MBC0_DOM2_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1580)++0x03 line.long 0x00 "MBC0_DOM2_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x15A0++0x03 line.long 0x00 "MBC0_DOM2_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x15A8)++0x03 line.long 0x00 "MBC0_DOM2_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x15C8++0x03 line.long 0x00 "MBC0_DOM2_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x15D0++0x03 line.long 0x00 "MBC0_DOM2_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x15F0++0x03 line.long 0x00 "MBC0_DOM2_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1640++0x03 line.long 0x00 "MBC0_DOM3_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1740++0x03 line.long 0x00 "MBC0_DOM3_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1780)++0x03 line.long 0x00 "MBC0_DOM3_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x17A0++0x03 line.long 0x00 "MBC0_DOM3_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x17A8)++0x03 line.long 0x00 "MBC0_DOM3_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x17C8++0x03 line.long 0x00 "MBC0_DOM3_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x17D0++0x03 line.long 0x00 "MBC0_DOM3_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x17F0++0x03 line.long 0x00 "MBC0_DOM3_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1840++0x03 line.long 0x00 "MBC0_DOM4_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1940++0x03 line.long 0x00 "MBC0_DOM4_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1980)++0x03 line.long 0x00 "MBC0_DOM4_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x19A0++0x03 line.long 0x00 "MBC0_DOM4_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x19A8)++0x03 line.long 0x00 "MBC0_DOM4_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x19C8++0x03 line.long 0x00 "MBC0_DOM4_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x19D0++0x03 line.long 0x00 "MBC0_DOM4_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x19F0++0x03 line.long 0x00 "MBC0_DOM4_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1A40++0x03 line.long 0x00 "MBC0_DOM5_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1B40++0x03 line.long 0x00 "MBC0_DOM5_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1B80)++0x03 line.long 0x00 "MBC0_DOM5_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x1BA0++0x03 line.long 0x00 "MBC0_DOM5_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x1BA8)++0x03 line.long 0x00 "MBC0_DOM5_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x1BC8++0x03 line.long 0x00 "MBC0_DOM5_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1BD0++0x03 line.long 0x00 "MBC0_DOM5_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1BF0++0x03 line.long 0x00 "MBC0_DOM5_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1C40++0x03 line.long 0x00 "MBC0_DOM6_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1D40++0x03 line.long 0x00 "MBC0_DOM6_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1D80)++0x03 line.long 0x00 "MBC0_DOM6_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x1DA0++0x03 line.long 0x00 "MBC0_DOM6_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x1DA8)++0x03 line.long 0x00 "MBC0_DOM6_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x1DC8++0x03 line.long 0x00 "MBC0_DOM6_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1DD0++0x03 line.long 0x00 "MBC0_DOM6_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1DF0++0x03 line.long 0x00 "MBC0_DOM6_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1E40++0x03 line.long 0x00 "MBC0_DOM7_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1F40++0x03 line.long 0x00 "MBC0_DOM7_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x1F80)++0x03 line.long 0x00 "MBC0_DOM7_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x1FA0++0x03 line.long 0x00 "MBC0_DOM7_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 4. (strings "0" "1" "2" "3" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0x1FA8)++0x03 line.long 0x00 "MBC0_DOM7_MEM2_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x1FC8++0x03 line.long 0x00 "MBC0_DOM7_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x1FD0++0x03 line.long 0x00 "MBC0_DOM7_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x1FF0++0x03 line.long 0x00 "MBC0_DOM7_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." rgroup.long 0x2000++0x03 line.long 0x00 "MBC1_MEM0_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x2004++0x03 line.long 0x00 "MBC1_MEM1_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x2008++0x03 line.long 0x00 "MBC1_MEM2_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x200C++0x03 line.long 0x00 "MBC1_MEM3_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" group.long 0x2010++0x03 line.long 0x00 "MBC1_NSE_BLK_INDEX,MBC NonSecure Enable Block Index" bitfld.long 0x00 31. "AI,Auto Increment" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" newline bitfld.long 0x00 8.--11. "MEM_SEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2.--5. "WNDX,Word index into the block NSE bitmap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2014++0x03 line.long 0x00 "MBC1_NSE_BLK_SET,MBC NonSecure Enable Block Set" hexmask.long 0x00 0.--31. 1. "W1SET,Write 1 Set" group.long 0x2018++0x03 line.long 0x00 "MBC1_NSE_BLK_CLR,MBC NonSecure Enable Block Clear" hexmask.long 0x00 0.--31. 1. "W1CLR,Write 1 Clear" group.long 0x201C++0x03 line.long 0x00 "MBC1_NSE_BLK_CLR_ALL,MBC NonSecure Enable Block Clear All" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" bitfld.long 0x00 8.--11. "MEMSEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2020++0x03 line.long 0x00 "MBC1_MEMN_GLBAC0,MBC Global Access Control" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." newline bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" newline bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" newline bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." newline bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" newline bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x2024)++0x03 line.long 0x00 "MBC1_MEMN_GLBAC$1,MBC Global Access Control" bitfld.long 0x00 31. "LK,LOCK" "0: This register is not locked and can be altered,1: This register is locked and cannot be altered" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" newline bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" newline bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." newline bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" newline bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat.end group.long 0x2040++0x03 line.long 0x00 "MBC1_DOM0_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2140++0x03 line.long 0x00 "MBC1_DOM0_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2180++0x03 line.long 0x00 "MBC1_DOM0_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x21A0++0x03 line.long 0x00 "MBC1_DOM0_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x21A8++0x03 line.long 0x00 "MBC1_DOM0_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x21C8++0x03 line.long 0x00 "MBC1_DOM0_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x21D0++0x03 line.long 0x00 "MBC1_DOM0_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x21F0++0x03 line.long 0x00 "MBC1_DOM0_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2240++0x03 line.long 0x00 "MBC1_DOM1_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2340++0x03 line.long 0x00 "MBC1_DOM1_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2380++0x03 line.long 0x00 "MBC1_DOM1_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x23A0++0x03 line.long 0x00 "MBC1_DOM1_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x23A8++0x03 line.long 0x00 "MBC1_DOM1_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x23C8++0x03 line.long 0x00 "MBC1_DOM1_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x23D0++0x03 line.long 0x00 "MBC1_DOM1_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x23F0++0x03 line.long 0x00 "MBC1_DOM1_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2440++0x03 line.long 0x00 "MBC1_DOM2_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2540++0x03 line.long 0x00 "MBC1_DOM2_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2580++0x03 line.long 0x00 "MBC1_DOM2_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x25A0++0x03 line.long 0x00 "MBC1_DOM2_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x25A8++0x03 line.long 0x00 "MBC1_DOM2_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x25C8++0x03 line.long 0x00 "MBC1_DOM2_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x25D0++0x03 line.long 0x00 "MBC1_DOM2_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x25F0++0x03 line.long 0x00 "MBC1_DOM2_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2640++0x03 line.long 0x00 "MBC1_DOM3_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2740++0x03 line.long 0x00 "MBC1_DOM3_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2780++0x03 line.long 0x00 "MBC1_DOM3_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x27A0++0x03 line.long 0x00 "MBC1_DOM3_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x27A8++0x03 line.long 0x00 "MBC1_DOM3_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x27C8++0x03 line.long 0x00 "MBC1_DOM3_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x27D0++0x03 line.long 0x00 "MBC1_DOM3_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x27F0++0x03 line.long 0x00 "MBC1_DOM3_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2840++0x03 line.long 0x00 "MBC1_DOM4_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2940++0x03 line.long 0x00 "MBC1_DOM4_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2980++0x03 line.long 0x00 "MBC1_DOM4_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x29A0++0x03 line.long 0x00 "MBC1_DOM4_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x29A8++0x03 line.long 0x00 "MBC1_DOM4_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x29C8++0x03 line.long 0x00 "MBC1_DOM4_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x29D0++0x03 line.long 0x00 "MBC1_DOM4_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x29F0++0x03 line.long 0x00 "MBC1_DOM4_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2A40++0x03 line.long 0x00 "MBC1_DOM5_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2B40++0x03 line.long 0x00 "MBC1_DOM5_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2B80++0x03 line.long 0x00 "MBC1_DOM5_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2BA0++0x03 line.long 0x00 "MBC1_DOM5_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2BA8++0x03 line.long 0x00 "MBC1_DOM5_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2BC8++0x03 line.long 0x00 "MBC1_DOM5_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2BD0++0x03 line.long 0x00 "MBC1_DOM5_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2BF0++0x03 line.long 0x00 "MBC1_DOM5_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2C40++0x03 line.long 0x00 "MBC1_DOM6_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2D40++0x03 line.long 0x00 "MBC1_DOM6_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2D80++0x03 line.long 0x00 "MBC1_DOM6_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2DA0++0x03 line.long 0x00 "MBC1_DOM6_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2DA8++0x03 line.long 0x00 "MBC1_DOM6_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2DC8++0x03 line.long 0x00 "MBC1_DOM6_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2DD0++0x03 line.long 0x00 "MBC1_DOM6_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2DF0++0x03 line.long 0x00 "MBC1_DOM6_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2E40++0x03 line.long 0x00 "MBC1_DOM7_MEM0_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2F40++0x03 line.long 0x00 "MBC1_DOM7_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2F80++0x03 line.long 0x00 "MBC1_DOM7_MEM1_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2FA0++0x03 line.long 0x00 "MBC1_DOM7_MEM1_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2FA8++0x03 line.long 0x00 "MBC1_DOM7_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2FC8++0x03 line.long 0x00 "MBC1_DOM7_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x2FD0++0x03 line.long 0x00 "MBC1_DOM7_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x2FF0++0x03 line.long 0x00 "MBC1_DOM7_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." rgroup.long 0x3000++0x03 line.long 0x00 "MBC2_MEM0_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x3004++0x03 line.long 0x00 "MBC2_MEM1_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x3008++0x03 line.long 0x00 "MBC2_MEM2_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x300C++0x03 line.long 0x00 "MBC2_MEM3_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" group.long 0x3010++0x03 line.long 0x00 "MBC2_NSE_BLK_INDEX,MBC NonSecure Enable Block Index" bitfld.long 0x00 31. "AI,Auto Increment" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" newline bitfld.long 0x00 8.--11. "MEM_SEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2.--5. "WNDX,Word index into the block NSE bitmap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3014++0x03 line.long 0x00 "MBC2_NSE_BLK_SET,MBC NonSecure Enable Block Set" hexmask.long 0x00 0.--31. 1. "W1SET,Write 1 Set" group.long 0x3018++0x03 line.long 0x00 "MBC2_NSE_BLK_CLR,MBC NonSecure Enable Block Clear" hexmask.long 0x00 0.--31. 1. "W1CLR,Write 1 Clear" group.long 0x301C++0x03 line.long 0x00 "MBC2_NSE_BLK_CLR_ALL,MBC NonSecure Enable Block Clear All" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" bitfld.long 0x00 8.--11. "MEMSEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3020++0x03 line.long 0x00 "MBC2_MEMN_GLBAC0,MBC Global Access Control" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." newline bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" newline bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" newline bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." newline bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" newline bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x3024)++0x03 line.long 0x00 "MBC2_MEMN_GLBAC$1,MBC Global Access Control" bitfld.long 0x00 31. "LK,LOCK" "0: This register is not locked and can be altered,1: This register is locked and cannot be altered" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" newline bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" newline bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." newline bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" newline bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat.end repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3040)++0x03 line.long 0x00 "MBC2_DOM0_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3140)++0x03 line.long 0x00 "MBC2_DOM0_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3180)++0x03 line.long 0x00 "MBC2_DOM0_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x31A0)++0x03 line.long 0x00 "MBC2_DOM0_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x31A8++0x03 line.long 0x00 "MBC2_DOM0_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x31C8++0x03 line.long 0x00 "MBC2_DOM0_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x31D0++0x03 line.long 0x00 "MBC2_DOM0_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x31F0++0x03 line.long 0x00 "MBC2_DOM0_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3240)++0x03 line.long 0x00 "MBC2_DOM1_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3340)++0x03 line.long 0x00 "MBC2_DOM1_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3380)++0x03 line.long 0x00 "MBC2_DOM1_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x33A0)++0x03 line.long 0x00 "MBC2_DOM1_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x33A8++0x03 line.long 0x00 "MBC2_DOM1_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x33C8++0x03 line.long 0x00 "MBC2_DOM1_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x33D0++0x03 line.long 0x00 "MBC2_DOM1_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x33F0++0x03 line.long 0x00 "MBC2_DOM1_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3440)++0x03 line.long 0x00 "MBC2_DOM2_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3540)++0x03 line.long 0x00 "MBC2_DOM2_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3580)++0x03 line.long 0x00 "MBC2_DOM2_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x35A0)++0x03 line.long 0x00 "MBC2_DOM2_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x35A8++0x03 line.long 0x00 "MBC2_DOM2_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x35C8++0x03 line.long 0x00 "MBC2_DOM2_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x35D0++0x03 line.long 0x00 "MBC2_DOM2_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x35F0++0x03 line.long 0x00 "MBC2_DOM2_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3640)++0x03 line.long 0x00 "MBC2_DOM3_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3740)++0x03 line.long 0x00 "MBC2_DOM3_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3780)++0x03 line.long 0x00 "MBC2_DOM3_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x37A0)++0x03 line.long 0x00 "MBC2_DOM3_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x37A8++0x03 line.long 0x00 "MBC2_DOM3_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x37C8++0x03 line.long 0x00 "MBC2_DOM3_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x37D0++0x03 line.long 0x00 "MBC2_DOM3_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x37F0++0x03 line.long 0x00 "MBC2_DOM3_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3840)++0x03 line.long 0x00 "MBC2_DOM4_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3940)++0x03 line.long 0x00 "MBC2_DOM4_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3980)++0x03 line.long 0x00 "MBC2_DOM4_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x39A0)++0x03 line.long 0x00 "MBC2_DOM4_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x39A8++0x03 line.long 0x00 "MBC2_DOM4_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x39C8++0x03 line.long 0x00 "MBC2_DOM4_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x39D0++0x03 line.long 0x00 "MBC2_DOM4_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x39F0++0x03 line.long 0x00 "MBC2_DOM4_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3A40)++0x03 line.long 0x00 "MBC2_DOM5_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3B40)++0x03 line.long 0x00 "MBC2_DOM5_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3B80)++0x03 line.long 0x00 "MBC2_DOM5_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x3BA0)++0x03 line.long 0x00 "MBC2_DOM5_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x3BA8++0x03 line.long 0x00 "MBC2_DOM5_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x3BC8++0x03 line.long 0x00 "MBC2_DOM5_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x3BD0++0x03 line.long 0x00 "MBC2_DOM5_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x3BF0++0x03 line.long 0x00 "MBC2_DOM5_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3C40)++0x03 line.long 0x00 "MBC2_DOM6_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3D40)++0x03 line.long 0x00 "MBC2_DOM6_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3D80)++0x03 line.long 0x00 "MBC2_DOM6_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x3DA0)++0x03 line.long 0x00 "MBC2_DOM6_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x3DA8++0x03 line.long 0x00 "MBC2_DOM6_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x3DC8++0x03 line.long 0x00 "MBC2_DOM6_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x3DD0++0x03 line.long 0x00 "MBC2_DOM6_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x3DF0++0x03 line.long 0x00 "MBC2_DOM6_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 9. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 0x1C 0x20 ) group.long ($2+0x3E40)++0x03 line.long 0x00 "MBC2_DOM7_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x3F40)++0x03 line.long 0x00 "MBC2_DOM7_MEM0_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end repeat 6. (strings "0" "1" "2" "3" "4" "5" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 ) group.long ($2+0x3F80)++0x03 line.long 0x00 "MBC2_DOM7_MEM1_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end repeat 2. (strings "0" "1" )(list 0x00 0x04 ) group.long ($2+0x3FA0)++0x03 line.long 0x00 "MBC2_DOM7_MEM1_BLK_NSE_W$1,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat.end group.long 0x3FA8++0x03 line.long 0x00 "MBC2_DOM7_MEM2_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x3FC8++0x03 line.long 0x00 "MBC2_DOM7_MEM2_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." group.long 0x3FD0++0x03 line.long 0x00 "MBC2_DOM7_MEM3_BLK_CFG_W0,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." group.long 0x3FF0++0x03 line.long 0x00 "MBC2_DOM7_MEM3_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." rgroup.long 0x4000++0x03 line.long 0x00 "MBC3_MEM0_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x4004++0x03 line.long 0x00 "MBC3_MEM1_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x4008++0x03 line.long 0x00 "MBC3_MEM2_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" rgroup.long 0x400C++0x03 line.long 0x00 "MBC3_MEM3_GLBCFG,MBC Global Configuration Register" bitfld.long 0x00 16.--20. "SIZE_LOG2,Log2 size per block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--9. 1. "NBLKS,Number of blocks in this memory" group.long 0x4010++0x03 line.long 0x00 "MBC3_NSE_BLK_INDEX,MBC NonSecure Enable Block Index" bitfld.long 0x00 31. "AI,Auto Increment" "0,1" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" newline bitfld.long 0x00 8.--11. "MEM_SEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2.--5. "WNDX,Word index into the block NSE bitmap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4014++0x03 line.long 0x00 "MBC3_NSE_BLK_SET,MBC NonSecure Enable Block Set" hexmask.long 0x00 0.--31. 1. "W1SET,Write 1 Set" group.long 0x4018++0x03 line.long 0x00 "MBC3_NSE_BLK_CLR,MBC NonSecure Enable Block Clear" hexmask.long 0x00 0.--31. 1. "W1CLR,Write 1 Clear" group.long 0x401C++0x03 line.long 0x00 "MBC3_NSE_BLK_CLR_ALL,MBC NonSecure Enable Block Clear All" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" bitfld.long 0x00 8.--11. "MEMSEL,Memory Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4020++0x03 line.long 0x00 "MBC3_MEMN_GLBAC0,MBC Global Access Control" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." newline bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" newline bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" newline bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." newline bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" newline bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x4024)++0x03 line.long 0x00 "MBC3_MEMN_GLBAC$1,MBC Global Access Control" bitfld.long 0x00 31. "LK,LOCK" "0: This register is not locked and can be altered,1: This register is locked and cannot be altered" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" newline bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" newline bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." newline bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" newline bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat.end repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4040)++0x03 line.long 0x00 "MBC3_DOM0_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4140++0x03 line.long 0x00 "MBC3_DOM0_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4240)++0x03 line.long 0x00 "MBC3_DOM1_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4340++0x03 line.long 0x00 "MBC3_DOM1_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4440)++0x03 line.long 0x00 "MBC3_DOM2_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4540++0x03 line.long 0x00 "MBC3_DOM2_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4640)++0x03 line.long 0x00 "MBC3_DOM3_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4740++0x03 line.long 0x00 "MBC3_DOM3_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4840)++0x03 line.long 0x00 "MBC3_DOM4_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4940++0x03 line.long 0x00 "MBC3_DOM4_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4A40)++0x03 line.long 0x00 "MBC3_DOM5_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4B40++0x03 line.long 0x00 "MBC3_DOM5_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4C40)++0x03 line.long 0x00 "MBC3_DOM6_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4D40++0x03 line.long 0x00 "MBC3_DOM6_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." repeat 3. (strings "0" "1" "2" )(list 0x00 0x04 0x08 ) group.long ($2+0x4E40)++0x03 line.long 0x00 "MBC3_DOM7_MEM0_BLK_CFG_W$1,MBC Memory Block Configuration Word" bitfld.long 0x00 31. "NSE7,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 28.--30. "MBACSEL7,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 27. "NSE6,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 24.--26. "MBACSEL6,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 23. "NSE5,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 20.--22. "MBACSEL5,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 19. "NSE4,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 16.--18. "MBACSEL4,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 15. "NSE3,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 12.--14. "MBACSEL3,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 11. "NSE2,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 8.--10. "MBACSEL2,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 7. "NSE1,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 4.--6. "MBACSEL1,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." newline bitfld.long 0x00 3. "NSE0,NonSecure Enable for block B" "0: Secure accesses are allowed noNSEcure..,1: Secure accesses are not allowed noNSEcure.." bitfld.long 0x00 0.--2. "MBACSEL0,Memory Block Access Control Select for block B" "0: select MBC_MEMN_GLBAC0 access control policy..,1: select MBC_MEMN_GLBAC1 access control policy..,2: select MBC_MEMN_GLBAC2 access control policy..,3: select MBC_MEMN_GLBAC3 access control policy..,4: select MBC_MEMN_GLBAC4 access control policy..,5: select MBC_MEMN_GLBAC5 access control policy..,6: select MBC_MEMN_GLBAC6 access control policy..,7: select MBC_MEMN_GLBAC7 access control policy.." repeat.end group.long 0x4F40++0x03 line.long 0x00 "MBC3_DOM7_MEM0_BLK_NSE_W0,MBC Memory Block NonSecure Enable Word" bitfld.long 0x00 31. "BIT31,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 30. "BIT30,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 29. "BIT29,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 28. "BIT28,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 27. "BIT27,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 26. "BIT26,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 25. "BIT25,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 24. "BIT24,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 23. "BIT23,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 22. "BIT22,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 21. "BIT21,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 20. "BIT20,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 19. "BIT19,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 18. "BIT18,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 17. "BIT17,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 16. "BIT16,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 31]" "0: Secure accesses to block B are allowed..,1: Secure accesses to block B are not allowed.." rgroup.long 0x5000++0x03 line.long 0x00 "MRC0_GLBCFG,MRC Global Configuration Register" bitfld.long 0x00 0.--4. "NRGNS,Number of regions [1-16]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x5010++0x03 line.long 0x00 "MRC0_NSE_RGN_INDIRECT,MRC NonSecure Enable Region Indirect" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" group.long 0x5014++0x03 line.long 0x00 "MRC0_NSE_RGN_SET,MRC NonSecure Enable Region Set" hexmask.long.word 0x00 0.--15. 1. "W1SET,Write 1 Set" group.long 0x5018++0x03 line.long 0x00 "MRC0_NSE_RGN_CLR,MRC NonSecure Enable Region Clear" hexmask.long.word 0x00 0.--15. 1. "W1CLR,Write 1 Clear" group.long 0x501C++0x03 line.long 0x00 "MRC0_NSE_RGN_CLR_ALL,MRC NonSecure Enable Region Clear All" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" group.long 0x5020++0x03 line.long 0x00 "MRC0_GLBAC0,MRC Global Access Control" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." newline bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" newline bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" newline bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." newline bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" newline bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x5024)++0x03 line.long 0x00 "MRC0_GLBAC$1,MRC Global Access Control" bitfld.long 0x00 31. "LK,LOCK" "0: This register is not locked and can be altered,1: This register is locked (read-only) and.." bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" newline bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" newline bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." newline bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" newline bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat.end group.long 0x5040++0x03 line.long 0x00 "MRC0_DOM0_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5044++0x03 line.long 0x00 "MRC0_DOM0_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5048++0x03 line.long 0x00 "MRC0_DOM0_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x504C++0x03 line.long 0x00 "MRC0_DOM0_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5050++0x03 line.long 0x00 "MRC0_DOM0_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5054++0x03 line.long 0x00 "MRC0_DOM0_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5058++0x03 line.long 0x00 "MRC0_DOM0_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x505C++0x03 line.long 0x00 "MRC0_DOM0_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5060++0x03 line.long 0x00 "MRC0_DOM0_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5064++0x03 line.long 0x00 "MRC0_DOM0_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5068++0x03 line.long 0x00 "MRC0_DOM0_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x506C++0x03 line.long 0x00 "MRC0_DOM0_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5070++0x03 line.long 0x00 "MRC0_DOM0_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5074++0x03 line.long 0x00 "MRC0_DOM0_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5078++0x03 line.long 0x00 "MRC0_DOM0_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x507C++0x03 line.long 0x00 "MRC0_DOM0_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x50C0++0x03 line.long 0x00 "MRC0_DOM0_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5140++0x03 line.long 0x00 "MRC0_DOM1_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5144++0x03 line.long 0x00 "MRC0_DOM1_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5148++0x03 line.long 0x00 "MRC0_DOM1_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x514C++0x03 line.long 0x00 "MRC0_DOM1_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5150++0x03 line.long 0x00 "MRC0_DOM1_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5154++0x03 line.long 0x00 "MRC0_DOM1_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5158++0x03 line.long 0x00 "MRC0_DOM1_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x515C++0x03 line.long 0x00 "MRC0_DOM1_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5160++0x03 line.long 0x00 "MRC0_DOM1_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5164++0x03 line.long 0x00 "MRC0_DOM1_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5168++0x03 line.long 0x00 "MRC0_DOM1_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x516C++0x03 line.long 0x00 "MRC0_DOM1_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5170++0x03 line.long 0x00 "MRC0_DOM1_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5174++0x03 line.long 0x00 "MRC0_DOM1_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5178++0x03 line.long 0x00 "MRC0_DOM1_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x517C++0x03 line.long 0x00 "MRC0_DOM1_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x51C0++0x03 line.long 0x00 "MRC0_DOM1_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5240++0x03 line.long 0x00 "MRC0_DOM2_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5244++0x03 line.long 0x00 "MRC0_DOM2_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5248++0x03 line.long 0x00 "MRC0_DOM2_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x524C++0x03 line.long 0x00 "MRC0_DOM2_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5250++0x03 line.long 0x00 "MRC0_DOM2_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5254++0x03 line.long 0x00 "MRC0_DOM2_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5258++0x03 line.long 0x00 "MRC0_DOM2_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x525C++0x03 line.long 0x00 "MRC0_DOM2_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5260++0x03 line.long 0x00 "MRC0_DOM2_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5264++0x03 line.long 0x00 "MRC0_DOM2_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5268++0x03 line.long 0x00 "MRC0_DOM2_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x526C++0x03 line.long 0x00 "MRC0_DOM2_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5270++0x03 line.long 0x00 "MRC0_DOM2_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5274++0x03 line.long 0x00 "MRC0_DOM2_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5278++0x03 line.long 0x00 "MRC0_DOM2_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x527C++0x03 line.long 0x00 "MRC0_DOM2_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x52C0++0x03 line.long 0x00 "MRC0_DOM2_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5340++0x03 line.long 0x00 "MRC0_DOM3_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5344++0x03 line.long 0x00 "MRC0_DOM3_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5348++0x03 line.long 0x00 "MRC0_DOM3_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x534C++0x03 line.long 0x00 "MRC0_DOM3_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5350++0x03 line.long 0x00 "MRC0_DOM3_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5354++0x03 line.long 0x00 "MRC0_DOM3_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5358++0x03 line.long 0x00 "MRC0_DOM3_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x535C++0x03 line.long 0x00 "MRC0_DOM3_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5360++0x03 line.long 0x00 "MRC0_DOM3_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5364++0x03 line.long 0x00 "MRC0_DOM3_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5368++0x03 line.long 0x00 "MRC0_DOM3_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x536C++0x03 line.long 0x00 "MRC0_DOM3_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5370++0x03 line.long 0x00 "MRC0_DOM3_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5374++0x03 line.long 0x00 "MRC0_DOM3_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5378++0x03 line.long 0x00 "MRC0_DOM3_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x537C++0x03 line.long 0x00 "MRC0_DOM3_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x53C0++0x03 line.long 0x00 "MRC0_DOM3_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5440++0x03 line.long 0x00 "MRC0_DOM4_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5444++0x03 line.long 0x00 "MRC0_DOM4_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5448++0x03 line.long 0x00 "MRC0_DOM4_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x544C++0x03 line.long 0x00 "MRC0_DOM4_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5450++0x03 line.long 0x00 "MRC0_DOM4_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5454++0x03 line.long 0x00 "MRC0_DOM4_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5458++0x03 line.long 0x00 "MRC0_DOM4_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x545C++0x03 line.long 0x00 "MRC0_DOM4_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5460++0x03 line.long 0x00 "MRC0_DOM4_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5464++0x03 line.long 0x00 "MRC0_DOM4_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5468++0x03 line.long 0x00 "MRC0_DOM4_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x546C++0x03 line.long 0x00 "MRC0_DOM4_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5470++0x03 line.long 0x00 "MRC0_DOM4_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5474++0x03 line.long 0x00 "MRC0_DOM4_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5478++0x03 line.long 0x00 "MRC0_DOM4_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x547C++0x03 line.long 0x00 "MRC0_DOM4_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x54C0++0x03 line.long 0x00 "MRC0_DOM4_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5540++0x03 line.long 0x00 "MRC0_DOM5_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5544++0x03 line.long 0x00 "MRC0_DOM5_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5548++0x03 line.long 0x00 "MRC0_DOM5_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x554C++0x03 line.long 0x00 "MRC0_DOM5_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5550++0x03 line.long 0x00 "MRC0_DOM5_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5554++0x03 line.long 0x00 "MRC0_DOM5_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5558++0x03 line.long 0x00 "MRC0_DOM5_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x555C++0x03 line.long 0x00 "MRC0_DOM5_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5560++0x03 line.long 0x00 "MRC0_DOM5_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5564++0x03 line.long 0x00 "MRC0_DOM5_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5568++0x03 line.long 0x00 "MRC0_DOM5_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x556C++0x03 line.long 0x00 "MRC0_DOM5_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5570++0x03 line.long 0x00 "MRC0_DOM5_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5574++0x03 line.long 0x00 "MRC0_DOM5_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5578++0x03 line.long 0x00 "MRC0_DOM5_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x557C++0x03 line.long 0x00 "MRC0_DOM5_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x55C0++0x03 line.long 0x00 "MRC0_DOM5_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5640++0x03 line.long 0x00 "MRC0_DOM6_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5644++0x03 line.long 0x00 "MRC0_DOM6_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5648++0x03 line.long 0x00 "MRC0_DOM6_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x564C++0x03 line.long 0x00 "MRC0_DOM6_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5650++0x03 line.long 0x00 "MRC0_DOM6_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5654++0x03 line.long 0x00 "MRC0_DOM6_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5658++0x03 line.long 0x00 "MRC0_DOM6_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x565C++0x03 line.long 0x00 "MRC0_DOM6_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5660++0x03 line.long 0x00 "MRC0_DOM6_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5664++0x03 line.long 0x00 "MRC0_DOM6_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5668++0x03 line.long 0x00 "MRC0_DOM6_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x566C++0x03 line.long 0x00 "MRC0_DOM6_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5670++0x03 line.long 0x00 "MRC0_DOM6_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5674++0x03 line.long 0x00 "MRC0_DOM6_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5678++0x03 line.long 0x00 "MRC0_DOM6_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x567C++0x03 line.long 0x00 "MRC0_DOM6_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x56C0++0x03 line.long 0x00 "MRC0_DOM6_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5740++0x03 line.long 0x00 "MRC0_DOM7_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5744++0x03 line.long 0x00 "MRC0_DOM7_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5748++0x03 line.long 0x00 "MRC0_DOM7_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x574C++0x03 line.long 0x00 "MRC0_DOM7_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5750++0x03 line.long 0x00 "MRC0_DOM7_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5754++0x03 line.long 0x00 "MRC0_DOM7_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5758++0x03 line.long 0x00 "MRC0_DOM7_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x575C++0x03 line.long 0x00 "MRC0_DOM7_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5760++0x03 line.long 0x00 "MRC0_DOM7_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5764++0x03 line.long 0x00 "MRC0_DOM7_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5768++0x03 line.long 0x00 "MRC0_DOM7_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x576C++0x03 line.long 0x00 "MRC0_DOM7_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5770++0x03 line.long 0x00 "MRC0_DOM7_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5774++0x03 line.long 0x00 "MRC0_DOM7_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5778++0x03 line.long 0x00 "MRC0_DOM7_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x577C++0x03 line.long 0x00 "MRC0_DOM7_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x57C0++0x03 line.long 0x00 "MRC0_DOM7_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." rgroup.long 0x5800++0x03 line.long 0x00 "MRC1_GLBCFG,MRC Global Configuration Register" bitfld.long 0x00 0.--4. "NRGNS,Number of regions [1-16]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x5810++0x03 line.long 0x00 "MRC1_NSE_RGN_INDIRECT,MRC NonSecure Enable Region Indirect" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" group.long 0x5814++0x03 line.long 0x00 "MRC1_NSE_RGN_SET,MRC NonSecure Enable Region Set" hexmask.long.word 0x00 0.--15. 1. "W1SET,Write 1 Set" group.long 0x5818++0x03 line.long 0x00 "MRC1_NSE_RGN_CLR,MRC NonSecure Enable Region Clear" hexmask.long.word 0x00 0.--15. 1. "W1CLR,Write 1 Clear" group.long 0x581C++0x03 line.long 0x00 "MRC1_NSE_RGN_CLR_ALL,MRC NonSecure Enable Region Clear All" hexmask.long.byte 0x00 16.--23. 1. "DID_SEL,DID Select" group.long 0x5820++0x03 line.long 0x00 "MRC1_GLBAC0,MRC Global Access Control" bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." newline bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" newline bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" newline bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." newline bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" newline bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x5824)++0x03 line.long 0x00 "MRC1_GLBAC$1,MRC Global Access Control" bitfld.long 0x00 31. "LK,LOCK" "0: This register is not locked and can be altered,1: This register is locked (read-only) and.." bitfld.long 0x00 14. "SPR,SecurePriv" "0: Read access is not allowed in Secure..,1: Read access is allowed in Secure Privilege mode" newline bitfld.long 0x00 13. "SPW,SecurePriv" "0: Write access is not allowed in Secure..,1: Write access is allowed in Secure Privilege.." bitfld.long 0x00 12. "SPX,SecurePriv Execute" "0: Execute access is not allowed in Secure..,1: Execute access is allowed in Secure Privilege.." newline bitfld.long 0x00 10. "SUR,SecureUser" "0: Read access is not allowed in Secure User mode,1: Read access is allowed in Secure User mode" bitfld.long 0x00 9. "SUW,SecureUser" "0: Write access is not allowed in Secure User mode,1: Write access is allowed in Secure User mode" newline bitfld.long 0x00 8. "SUX,SecureUser Execute" "0: Execute access is not allowed in Secure User..,1: Execute access is allowed in Secure User mode" bitfld.long 0x00 6. "NPR,NonsecurePriv" "0: Read access is not allowed in Nonsecure..,1: Read access is allowed in Nonsecure Privilege.." newline bitfld.long 0x00 5. "NPW,NonsecurePriv" "0: Write access is not allowed in Nonsecure..,1: Write access is allowed in Nonsecure.." bitfld.long 0x00 4. "NPX,NonsecurePriv Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure.." newline bitfld.long 0x00 2. "NUR,NonsecureUser" "0: Read access is not allowed in Nonsecure User..,1: Read access is allowed in Nonsecure User mode" bitfld.long 0x00 1. "NUW,NonsecureUser" "0: Write access is not allowed in Nonsecure User..,1: Write access is allowed in Nonsecure User mode" newline bitfld.long 0x00 0. "NUX,NonsecureUser Execute" "0: Execute access is not allowed in Nonsecure..,1: Execute access is allowed in Nonsecure User.." repeat.end group.long 0x5840++0x03 line.long 0x00 "MRC1_DOM0_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5844++0x03 line.long 0x00 "MRC1_DOM0_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5848++0x03 line.long 0x00 "MRC1_DOM0_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x584C++0x03 line.long 0x00 "MRC1_DOM0_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5850++0x03 line.long 0x00 "MRC1_DOM0_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5854++0x03 line.long 0x00 "MRC1_DOM0_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5858++0x03 line.long 0x00 "MRC1_DOM0_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x585C++0x03 line.long 0x00 "MRC1_DOM0_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5860++0x03 line.long 0x00 "MRC1_DOM0_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5864++0x03 line.long 0x00 "MRC1_DOM0_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5868++0x03 line.long 0x00 "MRC1_DOM0_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x586C++0x03 line.long 0x00 "MRC1_DOM0_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5870++0x03 line.long 0x00 "MRC1_DOM0_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5874++0x03 line.long 0x00 "MRC1_DOM0_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5878++0x03 line.long 0x00 "MRC1_DOM0_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x587C++0x03 line.long 0x00 "MRC1_DOM0_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x58C0++0x03 line.long 0x00 "MRC1_DOM0_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5940++0x03 line.long 0x00 "MRC1_DOM1_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5944++0x03 line.long 0x00 "MRC1_DOM1_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5948++0x03 line.long 0x00 "MRC1_DOM1_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x594C++0x03 line.long 0x00 "MRC1_DOM1_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5950++0x03 line.long 0x00 "MRC1_DOM1_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5954++0x03 line.long 0x00 "MRC1_DOM1_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5958++0x03 line.long 0x00 "MRC1_DOM1_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x595C++0x03 line.long 0x00 "MRC1_DOM1_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5960++0x03 line.long 0x00 "MRC1_DOM1_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5964++0x03 line.long 0x00 "MRC1_DOM1_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5968++0x03 line.long 0x00 "MRC1_DOM1_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x596C++0x03 line.long 0x00 "MRC1_DOM1_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5970++0x03 line.long 0x00 "MRC1_DOM1_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5974++0x03 line.long 0x00 "MRC1_DOM1_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5978++0x03 line.long 0x00 "MRC1_DOM1_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x597C++0x03 line.long 0x00 "MRC1_DOM1_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x59C0++0x03 line.long 0x00 "MRC1_DOM1_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5A40++0x03 line.long 0x00 "MRC1_DOM2_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A44++0x03 line.long 0x00 "MRC1_DOM2_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A48++0x03 line.long 0x00 "MRC1_DOM2_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A4C++0x03 line.long 0x00 "MRC1_DOM2_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A50++0x03 line.long 0x00 "MRC1_DOM2_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A54++0x03 line.long 0x00 "MRC1_DOM2_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A58++0x03 line.long 0x00 "MRC1_DOM2_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A5C++0x03 line.long 0x00 "MRC1_DOM2_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A60++0x03 line.long 0x00 "MRC1_DOM2_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A64++0x03 line.long 0x00 "MRC1_DOM2_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A68++0x03 line.long 0x00 "MRC1_DOM2_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A6C++0x03 line.long 0x00 "MRC1_DOM2_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A70++0x03 line.long 0x00 "MRC1_DOM2_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A74++0x03 line.long 0x00 "MRC1_DOM2_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5A78++0x03 line.long 0x00 "MRC1_DOM2_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5A7C++0x03 line.long 0x00 "MRC1_DOM2_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5AC0++0x03 line.long 0x00 "MRC1_DOM2_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5B40++0x03 line.long 0x00 "MRC1_DOM3_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B44++0x03 line.long 0x00 "MRC1_DOM3_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B48++0x03 line.long 0x00 "MRC1_DOM3_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B4C++0x03 line.long 0x00 "MRC1_DOM3_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B50++0x03 line.long 0x00 "MRC1_DOM3_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B54++0x03 line.long 0x00 "MRC1_DOM3_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B58++0x03 line.long 0x00 "MRC1_DOM3_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B5C++0x03 line.long 0x00 "MRC1_DOM3_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B60++0x03 line.long 0x00 "MRC1_DOM3_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B64++0x03 line.long 0x00 "MRC1_DOM3_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B68++0x03 line.long 0x00 "MRC1_DOM3_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B6C++0x03 line.long 0x00 "MRC1_DOM3_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B70++0x03 line.long 0x00 "MRC1_DOM3_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B74++0x03 line.long 0x00 "MRC1_DOM3_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5B78++0x03 line.long 0x00 "MRC1_DOM3_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5B7C++0x03 line.long 0x00 "MRC1_DOM3_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5BC0++0x03 line.long 0x00 "MRC1_DOM3_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5C40++0x03 line.long 0x00 "MRC1_DOM4_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C44++0x03 line.long 0x00 "MRC1_DOM4_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C48++0x03 line.long 0x00 "MRC1_DOM4_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C4C++0x03 line.long 0x00 "MRC1_DOM4_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C50++0x03 line.long 0x00 "MRC1_DOM4_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C54++0x03 line.long 0x00 "MRC1_DOM4_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C58++0x03 line.long 0x00 "MRC1_DOM4_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C5C++0x03 line.long 0x00 "MRC1_DOM4_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C60++0x03 line.long 0x00 "MRC1_DOM4_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C64++0x03 line.long 0x00 "MRC1_DOM4_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C68++0x03 line.long 0x00 "MRC1_DOM4_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C6C++0x03 line.long 0x00 "MRC1_DOM4_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C70++0x03 line.long 0x00 "MRC1_DOM4_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C74++0x03 line.long 0x00 "MRC1_DOM4_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5C78++0x03 line.long 0x00 "MRC1_DOM4_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5C7C++0x03 line.long 0x00 "MRC1_DOM4_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5CC0++0x03 line.long 0x00 "MRC1_DOM4_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5D40++0x03 line.long 0x00 "MRC1_DOM5_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D44++0x03 line.long 0x00 "MRC1_DOM5_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D48++0x03 line.long 0x00 "MRC1_DOM5_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D4C++0x03 line.long 0x00 "MRC1_DOM5_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D50++0x03 line.long 0x00 "MRC1_DOM5_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D54++0x03 line.long 0x00 "MRC1_DOM5_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D58++0x03 line.long 0x00 "MRC1_DOM5_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D5C++0x03 line.long 0x00 "MRC1_DOM5_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D60++0x03 line.long 0x00 "MRC1_DOM5_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D64++0x03 line.long 0x00 "MRC1_DOM5_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D68++0x03 line.long 0x00 "MRC1_DOM5_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D6C++0x03 line.long 0x00 "MRC1_DOM5_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D70++0x03 line.long 0x00 "MRC1_DOM5_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D74++0x03 line.long 0x00 "MRC1_DOM5_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5D78++0x03 line.long 0x00 "MRC1_DOM5_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5D7C++0x03 line.long 0x00 "MRC1_DOM5_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5DC0++0x03 line.long 0x00 "MRC1_DOM5_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5E40++0x03 line.long 0x00 "MRC1_DOM6_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E44++0x03 line.long 0x00 "MRC1_DOM6_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E48++0x03 line.long 0x00 "MRC1_DOM6_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E4C++0x03 line.long 0x00 "MRC1_DOM6_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E50++0x03 line.long 0x00 "MRC1_DOM6_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E54++0x03 line.long 0x00 "MRC1_DOM6_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E58++0x03 line.long 0x00 "MRC1_DOM6_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E5C++0x03 line.long 0x00 "MRC1_DOM6_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E60++0x03 line.long 0x00 "MRC1_DOM6_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E64++0x03 line.long 0x00 "MRC1_DOM6_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E68++0x03 line.long 0x00 "MRC1_DOM6_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E6C++0x03 line.long 0x00 "MRC1_DOM6_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E70++0x03 line.long 0x00 "MRC1_DOM6_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E74++0x03 line.long 0x00 "MRC1_DOM6_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5E78++0x03 line.long 0x00 "MRC1_DOM6_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5E7C++0x03 line.long 0x00 "MRC1_DOM6_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5EC0++0x03 line.long 0x00 "MRC1_DOM6_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." group.long 0x5F40++0x03 line.long 0x00 "MRC1_DOM7_RGD0_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F44++0x03 line.long 0x00 "MRC1_DOM7_RGD0_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F48++0x03 line.long 0x00 "MRC1_DOM7_RGD1_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F4C++0x03 line.long 0x00 "MRC1_DOM7_RGD1_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F50++0x03 line.long 0x00 "MRC1_DOM7_RGD2_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F54++0x03 line.long 0x00 "MRC1_DOM7_RGD2_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F58++0x03 line.long 0x00 "MRC1_DOM7_RGD3_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F5C++0x03 line.long 0x00 "MRC1_DOM7_RGD3_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F60++0x03 line.long 0x00 "MRC1_DOM7_RGD4_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F64++0x03 line.long 0x00 "MRC1_DOM7_RGD4_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F68++0x03 line.long 0x00 "MRC1_DOM7_RGD5_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F6C++0x03 line.long 0x00 "MRC1_DOM7_RGD5_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F70++0x03 line.long 0x00 "MRC1_DOM7_RGD6_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F74++0x03 line.long 0x00 "MRC1_DOM7_RGD6_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5F78++0x03 line.long 0x00 "MRC1_DOM7_RGD7_W0,MRC Region Descriptor Word 0" hexmask.long.tbyte 0x00 12.--31. 1. "STRT_ADDR,Start Address" bitfld.long 0x00 0.--2. "MRACSEL,Memory Region Access Control Select" "0: Select MRC_GLBAC0 access control policy,1: Select MRC_GLBAC1 access control policy,2: Select MRC_GLBAC2 access control policy,3: Select MRC_GLBAC3 access control policy,4: Select MRC_GLBAC4 access control policy,5: Select MRC_GLBAC5 access control policy,6: Select MRC_GLBAC6 access control policy,7: Select MRC_GLBAC7 access control policy" group.long 0x5F7C++0x03 line.long 0x00 "MRC1_DOM7_RGD7_W1,MRC Region Descriptor Word 1" hexmask.long.tbyte 0x00 12.--31. 1. "END_ADDR,End Address" bitfld.long 0x00 4. "NSE,NonSecure Enable" "0: Secure accesses to region r are allowed..,1: Secure accesses to region r are not allowed.." newline bitfld.long 0x00 0. "VLD,Valid" "0,1" group.long 0x5FC0++0x03 line.long 0x00 "MRC1_DOM7_RGD_NSE,MRC Region Descriptor NonSecure Enable" bitfld.long 0x00 15. "BIT15,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 14. "BIT14,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 13. "BIT13,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 12. "BIT12,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 11. "BIT11,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 10. "BIT10,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 9. "BIT9,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 8. "BIT8,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 7. "BIT7,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 6. "BIT6,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 5. "BIT5,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 4. "BIT4,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 3. "BIT3,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 2. "BIT2,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." newline bitfld.long 0x00 1. "BIT1,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." bitfld.long 0x00 0. "BIT0,Bit n NonSecure Enable [n = 0 - 15]" "0: Secure accesses to region n are allowed..,1: Secure accesses to region n are not allowed.." endif repeat 4. (increment 0 1)(increment 0 0x10) tree "mbc_derr[$1]" sif cpuis("IMX8UD3-CM33") rgroup.long ($2+0x400)++0x03 line.long 0x00 "MBC_DERR_W0,MBC Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long ($2+0x404)++0x03 line.long 0x00 "MBC_DERR_W1,MBC Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0: mbcxslv0,1: mbcxslv1,2: mbcxslv2,3: mbcxslv3,?..." newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long ($2+0x40C)++0x03 line.long 0x00 "MBC_DERR_W3,MBC Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" endif tree.end repeat.end repeat 2. (increment 0 1)(increment 0 0x90) tree "mrc_derr[$1]" sif cpuis("IMX8UD3-CM33") rgroup.long ($2+0x480)++0x03 line.long 0x00 "MRC_DERR_W0,MRC Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long ($2+0x484)++0x03 line.long 0x00 "MRC_DERR_W1,MRC Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long ($2+0x48C)++0x03 line.long 0x00 "MRC_DERR_W3,MRC Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" endif tree.end repeat.end tree.end tree "TRGMUX_ (TRGMUX)" tree "TRGMUX0" base ad:0x28027000 group.long 0x00++0x03 line.long 0x00 "LPIT0,TRGMUX LPIT0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 24.--30. 1. "SEL3,Trigger MUX Input 3 Source Select" newline hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x04++0x03 line.long 0x00 "TPM0,TRGMUX TPM0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" newline hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x08++0x03 line.long 0x00 "TPM1,TRGMUX TPM1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x0C++0x03 line.long 0x00 "TPM2,TRGMUX TPM2 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x10++0x03 line.long 0x00 "TPM3,TRGMUX TPM3 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" newline hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x14++0x03 line.long 0x00 "TPM8,TRGMUX TPM8 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" newline hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x18++0x03 line.long 0x00 "FlexIO0,TRGMUX FlexIO0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 24.--30. 1. "SEL3,Trigger MUX Input 3 Source Select" newline hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x1C++0x03 line.long 0x00 "LPI2C0,TRGMUX LPI2C0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x20++0x03 line.long 0x00 "LPI2C1,TRGMUX LPI2C1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x24++0x03 line.long 0x00 "LPI2C2,TRGMUX LPI2C2 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x28++0x03 line.long 0x00 "LPI2C3,TRGMUX LPI2C3 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x2C++0x03 line.long 0x00 "LPSPI0,TRGMUX LPSPI0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x30++0x03 line.long 0x00 "LPSPI1,TRGMUX LPSPI1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x34++0x03 line.long 0x00 "LPSPI2,TRGMUX LPSPI2 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x38++0x03 line.long 0x00 "LPSPI3,TRGMUX LPSPI3 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x3C++0x03 line.long 0x00 "LPUART0,TRGMUX LPUART0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x40++0x03 line.long 0x00 "LPUART1,TRGMUX LPUART1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x44++0x03 line.long 0x00 "LPUART2,TRGMUX LPUART2 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x48++0x03 line.long 0x00 "LPUART3,TRGMUX LPUART3 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x4C++0x03 line.long 0x00 "ADC0,TRGMUX ADC0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 24.--30. 1. "SEL3,Trigger MUX Input 3 Source Select" newline hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x50++0x03 line.long 0x00 "ADC1,TRGMUX ADC1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 24.--30. 1. "SEL3,Trigger MUX Input 3 Source Select" newline hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x54++0x03 line.long 0x00 "CMP0,TRGMUX CMP0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x58++0x03 line.long 0x00 "CMP1,TRGMUX CMP1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x5C++0x03 line.long 0x00 "DAC0,TRGMUX DAC0 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x60++0x03 line.long 0x00 "DAC1,TRGMUX DAC1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" tree.end tree "TRGMUX1" base ad:0x29250000 group.long 0x00++0x03 line.long 0x00 "LPIT1,TRGMUX LPIT1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 24.--30. 1. "SEL3,Trigger MUX Input 3 Source Select" newline hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x04++0x03 line.long 0x00 "TPM4,TRGMUX TPM4 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" newline hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x08++0x03 line.long 0x00 "TPM5,TRGMUX TPM5 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x0C++0x03 line.long 0x00 "TPM6,TRGMUX TPM6 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x10++0x03 line.long 0x00 "TPM7,TRGMUX TPM7 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" newline hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x14++0x03 line.long 0x00 "TPM8,TRGMUX TPM8 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" newline hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x18++0x03 line.long 0x00 "FlexIO1,TRGMUX FlexIO1 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 24.--30. 1. "SEL3,Trigger MUX Input 3 Source Select" newline hexmask.long.byte 0x00 16.--22. 1. "SEL2,Trigger MUX Input 2 Source Select" hexmask.long.byte 0x00 8.--14. 1. "SEL1,Trigger MUX Input 1 Source Select" newline hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x1C++0x03 line.long 0x00 "LPI2C4,TRGMUX LPI2C4 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x20++0x03 line.long 0x00 "LPI2C5,TRGMUX LPI2C5 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x24++0x03 line.long 0x00 "LPI2C6,TRGMUX LPI2C6 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x28++0x03 line.long 0x00 "LPI2C7,TRGMUX LPI2C7 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x2C++0x03 line.long 0x00 "LPSPI4,TRGMUX LPSPI4 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x30++0x03 line.long 0x00 "LPSPI5,TRGMUX LPSPI5 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x34++0x03 line.long 0x00 "LPUART4,TRGMUX LPUART4 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x38++0x03 line.long 0x00 "LPUART5,TRGMUX LPUART5 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x3C++0x03 line.long 0x00 "LPUART6,TRGMUX LPUART6 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" group.long 0x40++0x03 line.long 0x00 "LPUART7,TRGMUX LPUART7 Register" bitfld.long 0x00 31. "LK,TRGMUX register lock" "0: Register can be written,1: Register cannot be written until the next.." hexmask.long.byte 0x00 0.--6. 1. "SEL0,Trigger MUX Input 0 Source Select" tree.end tree.end tree "TSTMR (TIMESTAMP)" tree "TSTMR0__TIMESTAMP0" base ad:0x2802AC00 rgroup.long 0x00++0x03 line.long 0x00 "LOW,Time Stamp Timer Register Low" hexmask.long 0x00 0.--31. 1. "VALUE,Time Stamp Timer Low" rgroup.long 0x04++0x03 line.long 0x00 "HIGH,Time Stamp Timer Register High" hexmask.long 0x00 0.--31. 1. "VALUE,Time Stamp Timer High" tree.end tree "TSTMR1__TIMESTAMP0" base ad:0x29290C00 rgroup.long 0x00++0x03 line.long 0x00 "LOW,Time Stamp Timer Register Low" hexmask.long 0x00 0.--31. 1. "VALUE,Time Stamp Timer Low" rgroup.long 0x04++0x03 line.long 0x00 "HIGH,Time Stamp Timer Register High" hexmask.long 0x00 0.--31. 1. "VALUE,Time Stamp Timer High" tree.end tree.end tree "USB_XBAR (USB)" base ad:0x29940000 rgroup.long 0x00++0x03 line.long 0x00 "ID,Identification register" hexmask.long.byte 0x00 16.--23. 1. "REVISION,REVISION" bitfld.long 0x00 8.--13. "NID,NID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. "ID,ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x04++0x03 line.long 0x00 "HWGENERAL,Hardware General" bitfld.long 0x00 9.--10. "SM,SM" "0: No Serial Engine always use parallel signalling,1: Serial Engine present always use serial..,2: Software programmable - Reset to use parallel..,3: Software programmable - Reset to use serial.." bitfld.long 0x00 6.--8. "PHYM,PHYM" "0: UTMI/UMTI+,1: ULPI_DDR,2: ULPI,3: Serial Only,4: Software programmable - reset to UTMI/UTMI+,5: Software programmable - reset to ULPI DDR,6: Software programmable - reset to ULPI,7: Software programmable - reset to Serial" newline bitfld.long 0x00 4.--5. "PHYW,PHYW" "0: 8 bit wide data bus (Software non-programmable),1: 16 bit wide data bus (Software..,2: Reset to 8 bit wide data bus (Software..,3: Reset to 16 bit wide data bus (Software.." rgroup.long 0x08++0x03 line.long 0x00 "HWHOST,Host Hardware Parameters" bitfld.long 0x00 1.--3. "NPORT,NPORT" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "HC,HC" "0: Not supported,1: HOST_OP_EN" rgroup.long 0x0C++0x03 line.long 0x00 "HWDEVICE,Device Hardware Parameters" bitfld.long 0x00 1.--5. "DEVEP,DEVEP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. "DC,DC" "0: DEVICE_OP_DIS,1: DEVICE_OP_EN" rgroup.long 0x10++0x03 line.long 0x00 "HWTXBUF,TX Buffer Hardware Parameters" hexmask.long.byte 0x00 16.--23. 1. "TXCHANADD,TXCHANADD" hexmask.long.byte 0x00 0.--7. 1. "TXBURST,TXBURST" rgroup.long 0x14++0x03 line.long 0x00 "HWRXBUF,RX Buffer Hardware Parameters" hexmask.long.byte 0x00 8.--15. 1. "RXADD,RXADD" hexmask.long.byte 0x00 0.--7. 1. "RXBURST,RXBURST" group.long 0x80++0x03 line.long 0x00 "GPTIMER0LD,General Purpose Timer #0 Load" hexmask.long.tbyte 0x00 0.--23. 1. "GPTLD,GPTLD" group.long 0x84++0x03 line.long 0x00 "GPTIMER0CTRL,General Purpose Timer #0 Controller" bitfld.long 0x00 31. "GPTRUN,GPTRUN" "0: Stop counting,1: RUN" bitfld.long 0x00 30. "GPTRST,GPTRST" "0: NO_ACTION,1: Load counter value from GPTLD bits in.." newline bitfld.long 0x00 24. "GPTMODE,GPTMODE" "0: One Shot Mode,1: Repeat Mode" hexmask.long.tbyte 0x00 0.--23. 1. "GPTCNT,GPTCNT" group.long 0x88++0x03 line.long 0x00 "GPTIMER1LD,General Purpose Timer #1 Load" hexmask.long.tbyte 0x00 0.--23. 1. "GPTLD,GPTLD" group.long 0x8C++0x03 line.long 0x00 "GPTIMER1CTRL,General Purpose Timer #1 Controller" bitfld.long 0x00 31. "GPTRUN,GPTRUN" "0: Stop counting,1: RUN" bitfld.long 0x00 30. "GPTRST,GPTRST" "0: NO_ACTION,1: Load counter value from GPTLD bits in.." newline bitfld.long 0x00 24. "GPTMODE,GPTMODE" "0: One Shot Mode,1: Repeat Mode" hexmask.long.tbyte 0x00 0.--23. 1. "GPTCNT,GPTCNT" group.long 0x90++0x03 line.long 0x00 "SBUSCFG,System Bus Config" bitfld.long 0x00 0.--2. "AHBBRST,AHBBRST" "0: Incremental burst of unspecified length only,1: INCR4 burst then single transfer,2: INCR8 burst INCR4 burst then single transfer,3: INCR16 burst INCR8 burst INCR4 burst then..,?,5: INCR4 burst then incremental burst of..,6: INCR8 burst INCR4 burst then incremental..,7: INCR16 burst INCR8 burst INCR4 burst then.." rgroup.byte 0x100++0x00 line.byte 0x00 "CAPLENGTH,Capability Registers Length" hexmask.byte 0x00 0.--7. 1. "CAPLENGTH,CAPLENGTH" rgroup.word 0x102++0x01 line.word 0x00 "HCIVERSION,Host Controller Interface Version" hexmask.word 0x00 0.--15. 1. "HCIVERSION,HCIVERSION" rgroup.long 0x104++0x03 line.long 0x00 "HCSPARAMS,Host Controller Structural Parameters" bitfld.long 0x00 24.--27. "N_TT,N_TT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 20.--23. "N_PTT,N_PTT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16. "PI,PI" "0,1" bitfld.long 0x00 12.--15. "N_CC,N_CC" "0: There is no internal Companion Controller and..,1: There are internal companion controller(s)..,?..." newline bitfld.long 0x00 8.--11. "N_PCC,N_PCC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "PPC,PPC" "0,1" newline bitfld.long 0x00 0.--3. "N_PORTS,N_PORTS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x108++0x03 line.long 0x00 "HCCPARAMS,Host Controller Capability Parameters" hexmask.long.byte 0x00 8.--15. 1. "EECP,EECP" bitfld.long 0x00 4.--7. "IST,IST" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2. "ASP,ASP" "0,1" bitfld.long 0x00 1. "PFL,PFL" "0,1" newline bitfld.long 0x00 0. "ADC,ADC" "0,1" rgroup.word 0x120++0x01 line.word 0x00 "DCIVERSION,Device Controller Interface Version" hexmask.word 0x00 0.--15. 1. "DCIVERSION,DCIVERSION" rgroup.long 0x124++0x03 line.long 0x00 "DCCPARAMS,Device Controller Capability Parameters" bitfld.long 0x00 8. "HC,HC" "0,1" bitfld.long 0x00 7. "DC,DC" "0,1" newline bitfld.long 0x00 0.--4. "DEN,DEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x140++0x03 line.long 0x00 "USBCMD,USB Command Register" hexmask.long.byte 0x00 16.--23. 1. "ITC,ITC" bitfld.long 0x00 15. "FS_2,FS_2" "0,1" newline bitfld.long 0x00 14. "ATDTW,ATDTW" "0,1" bitfld.long 0x00 13. "SUTW,SUTW" "0,1" newline bitfld.long 0x00 11. "ASPE,ASPE" "0,1" bitfld.long 0x00 8.--9. "ASP,ASP" "0,1,2,3" newline bitfld.long 0x00 6. "IAA,IAA" "0,1" bitfld.long 0x00 5. "ASE,ASE" "0: Do not process the Asynchronous Schedule,1: Use the ASYNCLISTADDR register to access the.." newline bitfld.long 0x00 4. "PSE,PSE" "0: Do not process the Periodic Schedule,1: Use the PERIODICLISTBASE register to access.." bitfld.long 0x00 2.--3. "FS_1,FS_1" "0,1,2,3" newline bitfld.long 0x00 1. "RST,RST" "0,1" bitfld.long 0x00 0. "RS,RS" "0,1" group.long 0x144++0x03 line.long 0x00 "USBSTS,USB Status Register" bitfld.long 0x00 25. "TI1,TI1" "0,1" bitfld.long 0x00 24. "TI0,TI0" "0,1" newline rbitfld.long 0x00 16. "NAKI,NAKI" "0,1" bitfld.long 0x00 15. "AS,AS" "0,1" newline bitfld.long 0x00 14. "PS,PS" "0,1" bitfld.long 0x00 13. "RCL,RCL" "0,1" newline bitfld.long 0x00 12. "HCH,HCH" "0,1" bitfld.long 0x00 10. "ULPII,ULPII" "0,1" newline bitfld.long 0x00 8. "SLI,SLI" "0,1" bitfld.long 0x00 7. "SRI,SRI" "0,1" newline bitfld.long 0x00 6. "URI,URI" "0,1" bitfld.long 0x00 5. "AAI,AAI" "0,1" newline bitfld.long 0x00 4. "SEI,SEI" "0,1" bitfld.long 0x00 3. "FRI,FRI" "0,1" newline bitfld.long 0x00 2. "PCI,PCI" "0,1" bitfld.long 0x00 1. "UEI,UEI" "0,1" newline bitfld.long 0x00 0. "UI,UI" "0,1" group.long 0x148++0x03 line.long 0x00 "USBINTR,Interrupt Enable Register" bitfld.long 0x00 25. "TIE1,TIE1" "0,1" bitfld.long 0x00 24. "TIE0,TIE0" "0,1" newline bitfld.long 0x00 19. "UPIE,UPIE" "0,1" bitfld.long 0x00 18. "UAIE,UAIE" "0,1" newline bitfld.long 0x00 16. "NAKE,NAKE" "0,1" bitfld.long 0x00 10. "ULPIE,ULPIE" "0,1" newline bitfld.long 0x00 8. "SLE,SLE" "0,1" bitfld.long 0x00 7. "SRE,SRE" "0,1" newline bitfld.long 0x00 6. "URE,URE" "0,1" bitfld.long 0x00 5. "AAE,AAE" "0,1" newline bitfld.long 0x00 4. "SEE,SEE" "0,1" bitfld.long 0x00 3. "FRE,FRE" "0,1" newline bitfld.long 0x00 2. "PCE,PCE" "0,1" bitfld.long 0x00 1. "UEE,UEE" "0,1" newline bitfld.long 0x00 0. "UE,UE" "0,1" group.long 0x14C++0x03 line.long 0x00 "FRINDEX,USB Frame Index" hexmask.long.word 0x00 0.--13. 1. "FRINDEX,FRINDEX" group.long 0x154++0x03 line.long 0x00 "DEVICEADDR,Device Address" hexmask.long.byte 0x00 25.--31. 1. "USBADR,USBADR" bitfld.long 0x00 24. "USBADRA,USBADRA" "0,1" group.long 0x154++0x03 line.long 0x00 "PERIODICLISTBASE,Frame List Base Address" hexmask.long.tbyte 0x00 12.--31. 1. "BASEADR,BASEADR" group.long 0x158++0x03 line.long 0x00 "ASYNCLISTADDR,Next Asynch" hexmask.long 0x00 5.--31. 1. "ASYBASE,ASYBASE" group.long 0x158++0x03 line.long 0x00 "ENDPTLISTADDR,Endpoint List Address" hexmask.long.tbyte 0x00 11.--31. 1. "EPBASE,EPBASE" group.long 0x160++0x03 line.long 0x00 "BURSTSIZE,Programmable Burst Size" hexmask.long.word 0x00 8.--16. 1. "TXPBURST,TXPBURST" hexmask.long.byte 0x00 0.--7. 1. "RXPBURST,RXPBURST" group.long 0x164++0x03 line.long 0x00 "TXFILLTUNING,TX FIFO Fill Tuning" bitfld.long 0x00 16.--21. "TXFIFOTHRES,TXFIFOTHRES" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8.--12. "TXSCHHEALTH,TXSCHHEALTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.byte 0x00 0.--7. 1. "TXSCHOH,TXSCHOH" group.long 0x178++0x03 line.long 0x00 "ENDPTNAK,Endpoint NAK" hexmask.long.byte 0x00 16.--23. 1. "EPTN,EPTN" hexmask.long.byte 0x00 0.--7. 1. "EPRN,EPRN" group.long 0x17C++0x03 line.long 0x00 "ENDPTNAKEN,Endpoint NAK Enable" hexmask.long.byte 0x00 16.--23. 1. "EPTNE,EPTNE" hexmask.long.byte 0x00 0.--7. 1. "EPRNE,EPRNE" rgroup.long 0x180++0x03 line.long 0x00 "CONFIGFLAG,Configure Flag Register" bitfld.long 0x00 0. "CF,CF" "0: Port routing control logic default-routes..,1: Port routing control logic default-routes all.." group.long 0x184++0x03 line.long 0x00 "PORTSC1,Port Status & Control" bitfld.long 0x00 30.--31. "PTS_1,PTS_1" "0,1,2,3" bitfld.long 0x00 29. "STS,STS" "0,1" newline bitfld.long 0x00 28. "PTW,PTW" "0: Select the 8-bit UTMI interface [60MHz],1: Select the 16-bit UTMI interface [30MHz]" bitfld.long 0x00 26.--27. "PSPD,PSPD" "0: Full Speed,1: Low Speed,2: High Speed,3: UNDEFINED" newline bitfld.long 0x00 25. "PTS_2,PTS_2" "0,1" bitfld.long 0x00 24. "PFSC,PFSC" "0: Normal operation,1: Forced to full speed" newline bitfld.long 0x00 23. "PHCD,PHCD" "0: Enable PHY clock,1: Disable PHY clock" bitfld.long 0x00 22. "WKOC,WKOC" "0,1" newline bitfld.long 0x00 21. "WKDC,WKDC" "0,1" bitfld.long 0x00 20. "WKCN,WKCN" "0,1" newline bitfld.long 0x00 16.--19. "PTC,PTC" "0: TEST_MODE_DISABLE,1: J_STATE,2: K_STATE,3: SE0 (host) / NAK (device),4: Packet,5: FORCE_ENABLE_HS,6: FORCE_ENABLE_FS,7: FORCE_ENABLE_LS,?..." bitfld.long 0x00 14.--15. "PIC,PIC" "0: Port indicators are off,1: PORT_IND_AMBER,2: PORT_IND_GREEN,3: UNDEFINED" newline bitfld.long 0x00 13. "PO,PO" "0,1" bitfld.long 0x00 12. "PP,PP" "0,1" newline bitfld.long 0x00 10.--11. "LS,LS" "0: SE0,1: K_STATE,2: J_STATE,3: UNDEFINED" rbitfld.long 0x00 9. "HSP,HSP" "0,1" newline bitfld.long 0x00 8. "PR,PR" "0,1" bitfld.long 0x00 7. "SUSP,SUSP" "0,1" newline bitfld.long 0x00 6. "FPR,FPR" "0,1" bitfld.long 0x00 5. "OCC,OCC" "0,1" newline rbitfld.long 0x00 4. "OCA,OCA" "0: This port does not have an over-current..,1: This port currently has an over-current.." bitfld.long 0x00 3. "PEC,PEC" "0,1" newline bitfld.long 0x00 2. "PE,PE" "0,1" bitfld.long 0x00 1. "CSC,CSC" "0,1" newline rbitfld.long 0x00 0. "CCS,CCS" "0,1" group.long 0x1A4++0x03 line.long 0x00 "OTGSC,On-The-Go Status & control" bitfld.long 0x00 30. "DPIE,DPIE" "0,1" bitfld.long 0x00 29. "EN_1MS,EN_1MS" "0,1" newline bitfld.long 0x00 28. "BSEIE,BSEIE" "0,1" bitfld.long 0x00 27. "BSVIE,BSVIE" "0,1" newline bitfld.long 0x00 26. "ASVIE,ASVIE" "0,1" bitfld.long 0x00 25. "AVVIE,AVVIE" "0,1" newline bitfld.long 0x00 24. "IDIE,IDIE" "0,1" bitfld.long 0x00 22. "DPIS,DPIS" "0,1" newline bitfld.long 0x00 21. "STATUS_1MS,STATUS_1MS" "0,1" bitfld.long 0x00 20. "BSEIS,BSEIS" "0,1" newline bitfld.long 0x00 19. "BSVIS,BSVIS" "0,1" bitfld.long 0x00 18. "ASVIS,ASVIS" "0,1" newline bitfld.long 0x00 17. "AVVIS,AVVIS" "0,1" bitfld.long 0x00 16. "IDIS,IDIS" "0,1" newline rbitfld.long 0x00 14. "DPS,DPS" "0,1" rbitfld.long 0x00 13. "TOG_1MS,TOG_1MS" "0,1" newline rbitfld.long 0x00 12. "BSE,BSE" "0,1" rbitfld.long 0x00 11. "BSV,BSV" "0,1" newline rbitfld.long 0x00 10. "ASV,ASV" "0,1" rbitfld.long 0x00 9. "AVV,AVV" "0,1" newline rbitfld.long 0x00 8. "ID,ID" "0,1" bitfld.long 0x00 5. "IDPU,IDPU" "0,1" newline bitfld.long 0x00 4. "DP,DP" "0,1" bitfld.long 0x00 3. "OT,OT" "0,1" newline bitfld.long 0x00 1. "VC,VC" "0,1" bitfld.long 0x00 0. "VD,VD" "0,1" group.long 0x1A8++0x03 line.long 0x00 "USBMODE,USB Device Mode" bitfld.long 0x00 4. "SDIS,SDIS" "0,1" bitfld.long 0x00 3. "SLOM,SLOM" "0: Setup Lockouts On (default),1: Setup Lockouts Off" newline bitfld.long 0x00 2. "ES,ES" "0: Little Endian [Default],1: BIG_ENDIAN" bitfld.long 0x00 0.--1. "CM,CM" "0: Idle [Default for combination host/device],?,2: Device Controller [Default for device only..,3: Host Controller [Default for host only.." group.long 0x1AC++0x03 line.long 0x00 "ENDPTSETUPSTAT,Endpoint Setup Status" hexmask.long.word 0x00 0.--15. 1. "ENDPTSETUPSTAT,ENDPTSETUPSTAT" group.long 0x1B0++0x03 line.long 0x00 "ENDPTPRIME,Endpoint Prime" hexmask.long.byte 0x00 16.--23. 1. "PETB,PETB" hexmask.long.byte 0x00 0.--7. 1. "PERB,PERB" group.long 0x1B4++0x03 line.long 0x00 "ENDPTFLUSH,Endpoint Flush" hexmask.long.byte 0x00 16.--23. 1. "FETB,FETB" hexmask.long.byte 0x00 0.--7. 1. "FERB,FERB" rgroup.long 0x1B8++0x03 line.long 0x00 "ENDPTSTAT,Endpoint Status" hexmask.long.byte 0x00 16.--23. 1. "ETBR,ETBR" hexmask.long.byte 0x00 0.--7. 1. "ERBR,ERBR" group.long 0x1BC++0x03 line.long 0x00 "ENDPTCOMPLETE,Endpoint Complete" hexmask.long.byte 0x00 16.--23. 1. "ETCE,ETCE" hexmask.long.byte 0x00 0.--7. 1. "ERCE,ERCE" group.long 0x1C0++0x03 line.long 0x00 "ENDPTCTRL0,Endpoint Control0" bitfld.long 0x00 23. "TXE,TXE" "0,1" bitfld.long 0x00 18.--19. "TXT,TXT" "0,1,2,3" newline bitfld.long 0x00 16. "TXS,TXS" "0,1" bitfld.long 0x00 7. "RXE,RXE" "0,1" newline bitfld.long 0x00 2.--3. "RXT,RXT" "0,1,2,3" bitfld.long 0x00 0. "RXS,RXS" "0,1" repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x1C4)++0x03 line.long 0x00 "ENDPTCTRL$1,Endpoint Control $1" bitfld.long 0x00 23. "TXE,TXE" "0,1" bitfld.long 0x00 22. "TXR,TXR" "0,1" newline bitfld.long 0x00 21. "TXI,TXI" "0,1" bitfld.long 0x00 18.--19. "TXT,TXT" "0,1,2,3" newline bitfld.long 0x00 17. "TXD,TXD" "0,1" bitfld.long 0x00 16. "TXS,TXS" "0,1" newline bitfld.long 0x00 7. "RXE,RXE" "0,1" bitfld.long 0x00 6. "RXR,RXR" "0,1" newline bitfld.long 0x00 5. "RXI,RXI" "0,1" bitfld.long 0x00 2.--3. "RXT,RXT" "0,1,2,3" newline bitfld.long 0x00 1. "RXD,RXD" "0,1" bitfld.long 0x00 0. "RXS,RXS" "0,1" repeat.end tree.end tree "USB_XBARNC (USBNC)" base ad:0x29940200 group.long 0x00++0x03 line.long 0x00 "CTRL1,USB OTG Control 1 Register" rbitfld.long 0x00 31. "WIR,WIR" "0: No wake-up interrupt request received,1: Wake-up Interrupt Request received" bitfld.long 0x00 29. "WKUP_DPDM_EN,Wake-up on DPDM change enable" "0: DPDM changes wake-up to be disabled only when..,1: (Default) DPDM changes wake-up to be enabled.." newline bitfld.long 0x00 17. "WKUP_VBUS_EN,WKUP_VBUS_EN" "0: WKUP_VBUS_DIS,1: WKUP_VBUS_EN" bitfld.long 0x00 16. "WKUP_ID_EN,WKUP_ID_EN" "0: WKUP_ID_DIS,1: WKUP_ID_EN" newline bitfld.long 0x00 15. "WKUP_SW,WKUP_SW" "0: INACTIVE,1: Force wake-up" bitfld.long 0x00 14. "WKUP_SW_EN,WKUP_SW_EN" "0: SW_WKUP_DIS,1: SW_WKUP_EN" newline bitfld.long 0x00 10. "WIE,WIE" "0: Interrupt Disabled,1: Interrupt Enabled" bitfld.long 0x00 9. "PWR_POL,PWR_POL" "0: PMIC Power Pin is Low active,1: PMIC Power Pin is High active" newline bitfld.long 0x00 8. "OVER_CUR_POL,OVER_CUR_POL" "0: High active (high on this signal represents..,1: Low active (low on this signal represents an.." bitfld.long 0x00 7. "OVER_CUR_DIS,OVER_CUR_DIS" "0: Enables overcurrent detection,1: Disables overcurrent detection" group.long 0x04++0x03 line.long 0x00 "CTRL2,USB OTG Control 2 Register" eventfld.long 0x00 31. "UTMI_CLK_VLD,UTMI_CLK_VLD" "0: DEFAULT,?..." bitfld.long 0x00 3. "LOWSPEED_EN,LOWSPEED_EN" "0: DEFAULT,?..." newline bitfld.long 0x00 2. "AUTURESUME_EN,Auto Resume Enable" "0: DEFAULT,?..." bitfld.long 0x00 0.--1. "VBUS_SOURCE_SEL,VBUS_SOURCE_SEL" "0: VBUS_VALID,1: SESS_VALID_1,2: SESS_VALID_2,3: SESS_VALID_3" group.long 0x10++0x03 line.long 0x00 "HSIC_CTRL,USB Host HSIC Control Register" rbitfld.long 0x00 31. "CLK_VLD,CLK_VLD" "0: INVALID,1: VALID" bitfld.long 0x00 12. "HSIC_EN,HSIC_EN" "0: Disabled,1: Enabled" newline bitfld.long 0x00 11. "HSIC_CLK_ON,HSIC_CLK_ON" "0: INACTIVE,1: ACTIVE" tree.end tree "USB0C (USB)" base ad:0x29900000 rgroup.long 0x00++0x03 line.long 0x00 "ID,Identification register" hexmask.long.byte 0x00 16.--23. 1. "REVISION,REVISION" bitfld.long 0x00 8.--13. "NID,NID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. "ID,ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x04++0x03 line.long 0x00 "HWGENERAL,Hardware General" bitfld.long 0x00 9.--10. "SM,SM" "0: No Serial Engine always use parallel signalling,1: Serial Engine present always use serial..,2: Software programmable - Reset to use parallel..,3: Software programmable - Reset to use serial.." bitfld.long 0x00 6.--8. "PHYM,PHYM" "0: UTMI/UMTI+,1: ULPI_DDR,2: ULPI,3: Serial Only,4: Software programmable - reset to UTMI/UTMI+,5: Software programmable - reset to ULPI DDR,6: Software programmable - reset to ULPI,7: Software programmable - reset to Serial" newline bitfld.long 0x00 4.--5. "PHYW,PHYW" "0: 8 bit wide data bus (Software non-programmable),1: 16 bit wide data bus (Software..,2: Reset to 8 bit wide data bus (Software..,3: Reset to 16 bit wide data bus (Software.." rgroup.long 0x08++0x03 line.long 0x00 "HWHOST,Host Hardware Parameters" bitfld.long 0x00 1.--3. "NPORT,NPORT" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "HC,HC" "0: Not supported,1: HOST_OP_EN" rgroup.long 0x0C++0x03 line.long 0x00 "HWDEVICE,Device Hardware Parameters" bitfld.long 0x00 1.--5. "DEVEP,DEVEP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. "DC,DC" "0: DEVICE_OP_DIS,1: DEVICE_OP_EN" rgroup.long 0x10++0x03 line.long 0x00 "HWTXBUF,TX Buffer Hardware Parameters" hexmask.long.byte 0x00 16.--23. 1. "TXCHANADD,TXCHANADD" hexmask.long.byte 0x00 0.--7. 1. "TXBURST,TXBURST" rgroup.long 0x14++0x03 line.long 0x00 "HWRXBUF,RX Buffer Hardware Parameters" hexmask.long.byte 0x00 8.--15. 1. "RXADD,RXADD" hexmask.long.byte 0x00 0.--7. 1. "RXBURST,RXBURST" group.long 0x80++0x03 line.long 0x00 "GPTIMER0LD,General Purpose Timer #0 Load" hexmask.long.tbyte 0x00 0.--23. 1. "GPTLD,GPTLD" group.long 0x84++0x03 line.long 0x00 "GPTIMER0CTRL,General Purpose Timer #0 Controller" bitfld.long 0x00 31. "GPTRUN,GPTRUN" "0: Stop counting,1: RUN" bitfld.long 0x00 30. "GPTRST,GPTRST" "0: NO_ACTION,1: Load counter value from GPTLD bits in.." newline bitfld.long 0x00 24. "GPTMODE,GPTMODE" "0: One Shot Mode,1: Repeat Mode" hexmask.long.tbyte 0x00 0.--23. 1. "GPTCNT,GPTCNT" group.long 0x88++0x03 line.long 0x00 "GPTIMER1LD,General Purpose Timer #1 Load" hexmask.long.tbyte 0x00 0.--23. 1. "GPTLD,GPTLD" group.long 0x8C++0x03 line.long 0x00 "GPTIMER1CTRL,General Purpose Timer #1 Controller" bitfld.long 0x00 31. "GPTRUN,GPTRUN" "0: Stop counting,1: RUN" bitfld.long 0x00 30. "GPTRST,GPTRST" "0: NO_ACTION,1: Load counter value from GPTLD bits in.." newline bitfld.long 0x00 24. "GPTMODE,GPTMODE" "0: One Shot Mode,1: Repeat Mode" hexmask.long.tbyte 0x00 0.--23. 1. "GPTCNT,GPTCNT" group.long 0x90++0x03 line.long 0x00 "SBUSCFG,System Bus Config" bitfld.long 0x00 0.--2. "AHBBRST,AHBBRST" "0: Incremental burst of unspecified length only,1: INCR4 burst then single transfer,2: INCR8 burst INCR4 burst then single transfer,3: INCR16 burst INCR8 burst INCR4 burst then..,?,5: INCR4 burst then incremental burst of..,6: INCR8 burst INCR4 burst then incremental..,7: INCR16 burst INCR8 burst INCR4 burst then.." rgroup.byte 0x100++0x00 line.byte 0x00 "CAPLENGTH,Capability Registers Length" hexmask.byte 0x00 0.--7. 1. "CAPLENGTH,CAPLENGTH" rgroup.word 0x102++0x01 line.word 0x00 "HCIVERSION,Host Controller Interface Version" hexmask.word 0x00 0.--15. 1. "HCIVERSION,HCIVERSION" rgroup.long 0x104++0x03 line.long 0x00 "HCSPARAMS,Host Controller Structural Parameters" bitfld.long 0x00 24.--27. "N_TT,N_TT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 20.--23. "N_PTT,N_PTT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16. "PI,PI" "0,1" bitfld.long 0x00 12.--15. "N_CC,N_CC" "0: There is no internal Companion Controller and..,1: There are internal companion controller(s)..,?..." newline bitfld.long 0x00 8.--11. "N_PCC,N_PCC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "PPC,PPC" "0,1" newline bitfld.long 0x00 0.--3. "N_PORTS,N_PORTS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x108++0x03 line.long 0x00 "HCCPARAMS,Host Controller Capability Parameters" hexmask.long.byte 0x00 8.--15. 1. "EECP,EECP" bitfld.long 0x00 4.--7. "IST,IST" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2. "ASP,ASP" "0,1" bitfld.long 0x00 1. "PFL,PFL" "0,1" newline bitfld.long 0x00 0. "ADC,ADC" "0,1" rgroup.word 0x120++0x01 line.word 0x00 "DCIVERSION,Device Controller Interface Version" hexmask.word 0x00 0.--15. 1. "DCIVERSION,DCIVERSION" rgroup.long 0x124++0x03 line.long 0x00 "DCCPARAMS,Device Controller Capability Parameters" bitfld.long 0x00 8. "HC,HC" "0,1" bitfld.long 0x00 7. "DC,DC" "0,1" newline bitfld.long 0x00 0.--4. "DEN,DEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x140++0x03 line.long 0x00 "USBCMD,USB Command Register" hexmask.long.byte 0x00 16.--23. 1. "ITC,ITC" bitfld.long 0x00 15. "FS_2,FS_2" "0,1" newline bitfld.long 0x00 14. "ATDTW,ATDTW" "0,1" bitfld.long 0x00 13. "SUTW,SUTW" "0,1" newline bitfld.long 0x00 11. "ASPE,ASPE" "0,1" bitfld.long 0x00 8.--9. "ASP,ASP" "0,1,2,3" newline bitfld.long 0x00 6. "IAA,IAA" "0,1" bitfld.long 0x00 5. "ASE,ASE" "0: Do not process the Asynchronous Schedule,1: Use the ASYNCLISTADDR register to access the.." newline bitfld.long 0x00 4. "PSE,PSE" "0: Do not process the Periodic Schedule,1: Use the PERIODICLISTBASE register to access.." bitfld.long 0x00 2.--3. "FS_1,FS_1" "0,1,2,3" newline bitfld.long 0x00 1. "RST,RST" "0,1" bitfld.long 0x00 0. "RS,RS" "0,1" group.long 0x144++0x03 line.long 0x00 "USBSTS,USB Status Register" bitfld.long 0x00 25. "TI1,TI1" "0,1" bitfld.long 0x00 24. "TI0,TI0" "0,1" newline rbitfld.long 0x00 16. "NAKI,NAKI" "0,1" bitfld.long 0x00 15. "AS,AS" "0,1" newline bitfld.long 0x00 14. "PS,PS" "0,1" bitfld.long 0x00 13. "RCL,RCL" "0,1" newline bitfld.long 0x00 12. "HCH,HCH" "0,1" bitfld.long 0x00 10. "ULPII,ULPII" "0,1" newline bitfld.long 0x00 8. "SLI,SLI" "0,1" bitfld.long 0x00 7. "SRI,SRI" "0,1" newline bitfld.long 0x00 6. "URI,URI" "0,1" bitfld.long 0x00 5. "AAI,AAI" "0,1" newline bitfld.long 0x00 4. "SEI,SEI" "0,1" bitfld.long 0x00 3. "FRI,FRI" "0,1" newline bitfld.long 0x00 2. "PCI,PCI" "0,1" bitfld.long 0x00 1. "UEI,UEI" "0,1" newline bitfld.long 0x00 0. "UI,UI" "0,1" group.long 0x148++0x03 line.long 0x00 "USBINTR,Interrupt Enable Register" bitfld.long 0x00 25. "TIE1,TIE1" "0,1" bitfld.long 0x00 24. "TIE0,TIE0" "0,1" newline bitfld.long 0x00 19. "UPIE,UPIE" "0,1" bitfld.long 0x00 18. "UAIE,UAIE" "0,1" newline bitfld.long 0x00 16. "NAKE,NAKE" "0,1" bitfld.long 0x00 10. "ULPIE,ULPIE" "0,1" newline bitfld.long 0x00 8. "SLE,SLE" "0,1" bitfld.long 0x00 7. "SRE,SRE" "0,1" newline bitfld.long 0x00 6. "URE,URE" "0,1" bitfld.long 0x00 5. "AAE,AAE" "0,1" newline bitfld.long 0x00 4. "SEE,SEE" "0,1" bitfld.long 0x00 3. "FRE,FRE" "0,1" newline bitfld.long 0x00 2. "PCE,PCE" "0,1" bitfld.long 0x00 1. "UEE,UEE" "0,1" newline bitfld.long 0x00 0. "UE,UE" "0,1" group.long 0x14C++0x03 line.long 0x00 "FRINDEX,USB Frame Index" hexmask.long.word 0x00 0.--13. 1. "FRINDEX,FRINDEX" group.long 0x154++0x03 line.long 0x00 "DEVICEADDR,Device Address" hexmask.long.byte 0x00 25.--31. 1. "USBADR,USBADR" bitfld.long 0x00 24. "USBADRA,USBADRA" "0,1" group.long 0x154++0x03 line.long 0x00 "PERIODICLISTBASE,Frame List Base Address" hexmask.long.tbyte 0x00 12.--31. 1. "BASEADR,BASEADR" group.long 0x158++0x03 line.long 0x00 "ASYNCLISTADDR,Next Asynch" hexmask.long 0x00 5.--31. 1. "ASYBASE,ASYBASE" group.long 0x158++0x03 line.long 0x00 "ENDPTLISTADDR,Endpoint List Address" hexmask.long.tbyte 0x00 11.--31. 1. "EPBASE,EPBASE" group.long 0x160++0x03 line.long 0x00 "BURSTSIZE,Programmable Burst Size" hexmask.long.word 0x00 8.--16. 1. "TXPBURST,TXPBURST" hexmask.long.byte 0x00 0.--7. 1. "RXPBURST,RXPBURST" group.long 0x164++0x03 line.long 0x00 "TXFILLTUNING,TX FIFO Fill Tuning" bitfld.long 0x00 16.--21. "TXFIFOTHRES,TXFIFOTHRES" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8.--12. "TXSCHHEALTH,TXSCHHEALTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.byte 0x00 0.--7. 1. "TXSCHOH,TXSCHOH" group.long 0x178++0x03 line.long 0x00 "ENDPTNAK,Endpoint NAK" hexmask.long.byte 0x00 16.--23. 1. "EPTN,EPTN" hexmask.long.byte 0x00 0.--7. 1. "EPRN,EPRN" group.long 0x17C++0x03 line.long 0x00 "ENDPTNAKEN,Endpoint NAK Enable" hexmask.long.byte 0x00 16.--23. 1. "EPTNE,EPTNE" hexmask.long.byte 0x00 0.--7. 1. "EPRNE,EPRNE" rgroup.long 0x180++0x03 line.long 0x00 "CONFIGFLAG,Configure Flag Register" bitfld.long 0x00 0. "CF,CF" "0: Port routing control logic default-routes..,1: Port routing control logic default-routes all.." group.long 0x184++0x03 line.long 0x00 "PORTSC1,Port Status & Control" bitfld.long 0x00 30.--31. "PTS_1,PTS_1" "0,1,2,3" bitfld.long 0x00 29. "STS,STS" "0,1" newline bitfld.long 0x00 28. "PTW,PTW" "0: Select the 8-bit UTMI interface [60MHz],1: Select the 16-bit UTMI interface [30MHz]" bitfld.long 0x00 26.--27. "PSPD,PSPD" "0: Full Speed,1: Low Speed,2: High Speed,3: UNDEFINED" newline bitfld.long 0x00 25. "PTS_2,PTS_2" "0,1" bitfld.long 0x00 24. "PFSC,PFSC" "0: Normal operation,1: Forced to full speed" newline bitfld.long 0x00 23. "PHCD,PHCD" "0: Enable PHY clock,1: Disable PHY clock" bitfld.long 0x00 22. "WKOC,WKOC" "0,1" newline bitfld.long 0x00 21. "WKDC,WKDC" "0,1" bitfld.long 0x00 20. "WKCN,WKCN" "0,1" newline bitfld.long 0x00 16.--19. "PTC,PTC" "0: TEST_MODE_DISABLE,1: J_STATE,2: K_STATE,3: SE0 (host) / NAK (device),4: Packet,5: FORCE_ENABLE_HS,6: FORCE_ENABLE_FS,7: FORCE_ENABLE_LS,?..." bitfld.long 0x00 14.--15. "PIC,PIC" "0: Port indicators are off,1: PORT_IND_AMBER,2: PORT_IND_GREEN,3: UNDEFINED" newline bitfld.long 0x00 13. "PO,PO" "0,1" bitfld.long 0x00 12. "PP,PP" "0,1" newline bitfld.long 0x00 10.--11. "LS,LS" "0: SE0,1: K_STATE,2: J_STATE,3: UNDEFINED" rbitfld.long 0x00 9. "HSP,HSP" "0,1" newline bitfld.long 0x00 8. "PR,PR" "0,1" bitfld.long 0x00 7. "SUSP,SUSP" "0,1" newline bitfld.long 0x00 6. "FPR,FPR" "0,1" bitfld.long 0x00 5. "OCC,OCC" "0,1" newline rbitfld.long 0x00 4. "OCA,OCA" "0: This port does not have an over-current..,1: This port currently has an over-current.." bitfld.long 0x00 3. "PEC,PEC" "0,1" newline bitfld.long 0x00 2. "PE,PE" "0,1" bitfld.long 0x00 1. "CSC,CSC" "0,1" newline rbitfld.long 0x00 0. "CCS,CCS" "0,1" group.long 0x1A4++0x03 line.long 0x00 "OTGSC,On-The-Go Status & control" bitfld.long 0x00 30. "DPIE,DPIE" "0,1" bitfld.long 0x00 29. "EN_1MS,EN_1MS" "0,1" newline bitfld.long 0x00 28. "BSEIE,BSEIE" "0,1" bitfld.long 0x00 27. "BSVIE,BSVIE" "0,1" newline bitfld.long 0x00 26. "ASVIE,ASVIE" "0,1" bitfld.long 0x00 25. "AVVIE,AVVIE" "0,1" newline bitfld.long 0x00 24. "IDIE,IDIE" "0,1" bitfld.long 0x00 22. "DPIS,DPIS" "0,1" newline bitfld.long 0x00 21. "STATUS_1MS,STATUS_1MS" "0,1" bitfld.long 0x00 20. "BSEIS,BSEIS" "0,1" newline bitfld.long 0x00 19. "BSVIS,BSVIS" "0,1" bitfld.long 0x00 18. "ASVIS,ASVIS" "0,1" newline bitfld.long 0x00 17. "AVVIS,AVVIS" "0,1" bitfld.long 0x00 16. "IDIS,IDIS" "0,1" newline rbitfld.long 0x00 14. "DPS,DPS" "0,1" rbitfld.long 0x00 13. "TOG_1MS,TOG_1MS" "0,1" newline rbitfld.long 0x00 12. "BSE,BSE" "0,1" rbitfld.long 0x00 11. "BSV,BSV" "0,1" newline rbitfld.long 0x00 10. "ASV,ASV" "0,1" rbitfld.long 0x00 9. "AVV,AVV" "0,1" newline rbitfld.long 0x00 8. "ID,ID" "0,1" bitfld.long 0x00 5. "IDPU,IDPU" "0,1" newline bitfld.long 0x00 4. "DP,DP" "0,1" bitfld.long 0x00 3. "OT,OT" "0,1" newline bitfld.long 0x00 1. "VC,VC" "0,1" bitfld.long 0x00 0. "VD,VD" "0,1" group.long 0x1A8++0x03 line.long 0x00 "USBMODE,USB Device Mode" bitfld.long 0x00 4. "SDIS,SDIS" "0,1" bitfld.long 0x00 3. "SLOM,SLOM" "0: Setup Lockouts On (default),1: Setup Lockouts Off" newline bitfld.long 0x00 2. "ES,ES" "0: Little Endian [Default],1: BIG_ENDIAN" bitfld.long 0x00 0.--1. "CM,CM" "0: Idle [Default for combination host/device],?,2: Device Controller [Default for device only..,3: Host Controller [Default for host only.." group.long 0x1AC++0x03 line.long 0x00 "ENDPTSETUPSTAT,Endpoint Setup Status" hexmask.long.word 0x00 0.--15. 1. "ENDPTSETUPSTAT,ENDPTSETUPSTAT" group.long 0x1B0++0x03 line.long 0x00 "ENDPTPRIME,Endpoint Prime" hexmask.long.byte 0x00 16.--23. 1. "PETB,PETB" hexmask.long.byte 0x00 0.--7. 1. "PERB,PERB" group.long 0x1B4++0x03 line.long 0x00 "ENDPTFLUSH,Endpoint Flush" hexmask.long.byte 0x00 16.--23. 1. "FETB,FETB" hexmask.long.byte 0x00 0.--7. 1. "FERB,FERB" rgroup.long 0x1B8++0x03 line.long 0x00 "ENDPTSTAT,Endpoint Status" hexmask.long.byte 0x00 16.--23. 1. "ETBR,ETBR" hexmask.long.byte 0x00 0.--7. 1. "ERBR,ERBR" group.long 0x1BC++0x03 line.long 0x00 "ENDPTCOMPLETE,Endpoint Complete" hexmask.long.byte 0x00 16.--23. 1. "ETCE,ETCE" hexmask.long.byte 0x00 0.--7. 1. "ERCE,ERCE" group.long 0x1C0++0x03 line.long 0x00 "ENDPTCTRL0,Endpoint Control0" bitfld.long 0x00 23. "TXE,TXE" "0,1" bitfld.long 0x00 18.--19. "TXT,TXT" "0,1,2,3" newline bitfld.long 0x00 16. "TXS,TXS" "0,1" bitfld.long 0x00 7. "RXE,RXE" "0,1" newline bitfld.long 0x00 2.--3. "RXT,RXT" "0,1,2,3" bitfld.long 0x00 0. "RXS,RXS" "0,1" repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x1C4)++0x03 line.long 0x00 "ENDPTCTRL$1,Endpoint Control $1" bitfld.long 0x00 23. "TXE,TXE" "0,1" bitfld.long 0x00 22. "TXR,TXR" "0,1" newline bitfld.long 0x00 21. "TXI,TXI" "0,1" bitfld.long 0x00 18.--19. "TXT,TXT" "0,1,2,3" newline bitfld.long 0x00 17. "TXD,TXD" "0,1" bitfld.long 0x00 16. "TXS,TXS" "0,1" newline bitfld.long 0x00 7. "RXE,RXE" "0,1" bitfld.long 0x00 6. "RXR,RXR" "0,1" newline bitfld.long 0x00 5. "RXI,RXI" "0,1" bitfld.long 0x00 2.--3. "RXT,RXT" "0,1,2,3" newline bitfld.long 0x00 1. "RXD,RXD" "0,1" bitfld.long 0x00 0. "RXS,RXS" "0,1" repeat.end tree.end tree "USB0NC (USBNC)" base ad:0x29900200 group.long 0x00++0x03 line.long 0x00 "CTRL1,USB OTG Control 1 Register" rbitfld.long 0x00 31. "WIR,WIR" "0: No wake-up interrupt request received,1: Wake-up Interrupt Request received" bitfld.long 0x00 29. "WKUP_DPDM_EN,Wake-up on DPDM change enable" "0: DPDM changes wake-up to be disabled only when..,1: (Default) DPDM changes wake-up to be enabled.." newline bitfld.long 0x00 17. "WKUP_VBUS_EN,WKUP_VBUS_EN" "0: WKUP_VBUS_DIS,1: WKUP_VBUS_EN" bitfld.long 0x00 16. "WKUP_ID_EN,WKUP_ID_EN" "0: WKUP_ID_DIS,1: WKUP_ID_EN" newline bitfld.long 0x00 15. "WKUP_SW,WKUP_SW" "0: INACTIVE,1: Force wake-up" bitfld.long 0x00 14. "WKUP_SW_EN,WKUP_SW_EN" "0: SW_WKUP_DIS,1: SW_WKUP_EN" newline bitfld.long 0x00 10. "WIE,WIE" "0: Interrupt Disabled,1: Interrupt Enabled" bitfld.long 0x00 9. "PWR_POL,PWR_POL" "0: PMIC Power Pin is Low active,1: PMIC Power Pin is High active" newline bitfld.long 0x00 8. "OVER_CUR_POL,OVER_CUR_POL" "0: High active (high on this signal represents..,1: Low active (low on this signal represents an.." bitfld.long 0x00 7. "OVER_CUR_DIS,OVER_CUR_DIS" "0: Enables overcurrent detection,1: Disables overcurrent detection" group.long 0x04++0x03 line.long 0x00 "CTRL2,USB OTG Control 2 Register" eventfld.long 0x00 31. "UTMI_CLK_VLD,UTMI_CLK_VLD" "0: DEFAULT,?..." bitfld.long 0x00 3. "LOWSPEED_EN,LOWSPEED_EN" "0: DEFAULT,?..." newline bitfld.long 0x00 2. "AUTURESUME_EN,Auto Resume Enable" "0: DEFAULT,?..." bitfld.long 0x00 0.--1. "VBUS_SOURCE_SEL,VBUS_SOURCE_SEL" "0: VBUS_VALID,1: SESS_VALID_1,2: SESS_VALID_2,3: SESS_VALID_3" group.long 0x10++0x03 line.long 0x00 "HSIC_CTRL,USB Host HSIC Control Register" rbitfld.long 0x00 31. "CLK_VLD,CLK_VLD" "0: INVALID,1: VALID" bitfld.long 0x00 12. "HSIC_EN,HSIC_EN" "0: Disabled,1: Enabled" newline bitfld.long 0x00 11. "HSIC_CLK_ON,HSIC_CLK_ON" "0: INACTIVE,1: ACTIVE" tree.end tree "USB1C (USB)" base ad:0x29920000 rgroup.long 0x00++0x03 line.long 0x00 "ID,Identification register" hexmask.long.byte 0x00 16.--23. 1. "REVISION,REVISION" bitfld.long 0x00 8.--13. "NID,NID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. "ID,ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x04++0x03 line.long 0x00 "HWGENERAL,Hardware General" bitfld.long 0x00 9.--10. "SM,SM" "0: No Serial Engine always use parallel signalling,1: Serial Engine present always use serial..,2: Software programmable - Reset to use parallel..,3: Software programmable - Reset to use serial.." bitfld.long 0x00 6.--8. "PHYM,PHYM" "0: UTMI/UMTI+,1: ULPI_DDR,2: ULPI,3: Serial Only,4: Software programmable - reset to UTMI/UTMI+,5: Software programmable - reset to ULPI DDR,6: Software programmable - reset to ULPI,7: Software programmable - reset to Serial" newline bitfld.long 0x00 4.--5. "PHYW,PHYW" "0: 8 bit wide data bus (Software non-programmable),1: 16 bit wide data bus (Software..,2: Reset to 8 bit wide data bus (Software..,3: Reset to 16 bit wide data bus (Software.." rgroup.long 0x08++0x03 line.long 0x00 "HWHOST,Host Hardware Parameters" bitfld.long 0x00 1.--3. "NPORT,NPORT" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "HC,HC" "0: Not supported,1: HOST_OP_EN" rgroup.long 0x0C++0x03 line.long 0x00 "HWDEVICE,Device Hardware Parameters" bitfld.long 0x00 1.--5. "DEVEP,DEVEP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. "DC,DC" "0: DEVICE_OP_DIS,1: DEVICE_OP_EN" rgroup.long 0x10++0x03 line.long 0x00 "HWTXBUF,TX Buffer Hardware Parameters" hexmask.long.byte 0x00 16.--23. 1. "TXCHANADD,TXCHANADD" hexmask.long.byte 0x00 0.--7. 1. "TXBURST,TXBURST" rgroup.long 0x14++0x03 line.long 0x00 "HWRXBUF,RX Buffer Hardware Parameters" hexmask.long.byte 0x00 8.--15. 1. "RXADD,RXADD" hexmask.long.byte 0x00 0.--7. 1. "RXBURST,RXBURST" group.long 0x80++0x03 line.long 0x00 "GPTIMER0LD,General Purpose Timer #0 Load" hexmask.long.tbyte 0x00 0.--23. 1. "GPTLD,GPTLD" group.long 0x84++0x03 line.long 0x00 "GPTIMER0CTRL,General Purpose Timer #0 Controller" bitfld.long 0x00 31. "GPTRUN,GPTRUN" "0: Stop counting,1: RUN" bitfld.long 0x00 30. "GPTRST,GPTRST" "0: NO_ACTION,1: Load counter value from GPTLD bits in.." newline bitfld.long 0x00 24. "GPTMODE,GPTMODE" "0: One Shot Mode,1: Repeat Mode" hexmask.long.tbyte 0x00 0.--23. 1. "GPTCNT,GPTCNT" group.long 0x88++0x03 line.long 0x00 "GPTIMER1LD,General Purpose Timer #1 Load" hexmask.long.tbyte 0x00 0.--23. 1. "GPTLD,GPTLD" group.long 0x8C++0x03 line.long 0x00 "GPTIMER1CTRL,General Purpose Timer #1 Controller" bitfld.long 0x00 31. "GPTRUN,GPTRUN" "0: Stop counting,1: RUN" bitfld.long 0x00 30. "GPTRST,GPTRST" "0: NO_ACTION,1: Load counter value from GPTLD bits in.." newline bitfld.long 0x00 24. "GPTMODE,GPTMODE" "0: One Shot Mode,1: Repeat Mode" hexmask.long.tbyte 0x00 0.--23. 1. "GPTCNT,GPTCNT" group.long 0x90++0x03 line.long 0x00 "SBUSCFG,System Bus Config" bitfld.long 0x00 0.--2. "AHBBRST,AHBBRST" "0: Incremental burst of unspecified length only,1: INCR4 burst then single transfer,2: INCR8 burst INCR4 burst then single transfer,3: INCR16 burst INCR8 burst INCR4 burst then..,?,5: INCR4 burst then incremental burst of..,6: INCR8 burst INCR4 burst then incremental..,7: INCR16 burst INCR8 burst INCR4 burst then.." rgroup.byte 0x100++0x00 line.byte 0x00 "CAPLENGTH,Capability Registers Length" hexmask.byte 0x00 0.--7. 1. "CAPLENGTH,CAPLENGTH" rgroup.word 0x102++0x01 line.word 0x00 "HCIVERSION,Host Controller Interface Version" hexmask.word 0x00 0.--15. 1. "HCIVERSION,HCIVERSION" rgroup.long 0x104++0x03 line.long 0x00 "HCSPARAMS,Host Controller Structural Parameters" bitfld.long 0x00 24.--27. "N_TT,N_TT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 20.--23. "N_PTT,N_PTT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16. "PI,PI" "0,1" bitfld.long 0x00 12.--15. "N_CC,N_CC" "0: There is no internal Companion Controller and..,1: There are internal companion controller(s)..,?..." newline bitfld.long 0x00 8.--11. "N_PCC,N_PCC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. "PPC,PPC" "0,1" newline bitfld.long 0x00 0.--3. "N_PORTS,N_PORTS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x108++0x03 line.long 0x00 "HCCPARAMS,Host Controller Capability Parameters" hexmask.long.byte 0x00 8.--15. 1. "EECP,EECP" bitfld.long 0x00 4.--7. "IST,IST" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2. "ASP,ASP" "0,1" bitfld.long 0x00 1. "PFL,PFL" "0,1" newline bitfld.long 0x00 0. "ADC,ADC" "0,1" rgroup.word 0x120++0x01 line.word 0x00 "DCIVERSION,Device Controller Interface Version" hexmask.word 0x00 0.--15. 1. "DCIVERSION,DCIVERSION" rgroup.long 0x124++0x03 line.long 0x00 "DCCPARAMS,Device Controller Capability Parameters" bitfld.long 0x00 8. "HC,HC" "0,1" bitfld.long 0x00 7. "DC,DC" "0,1" newline bitfld.long 0x00 0.--4. "DEN,DEN" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x140++0x03 line.long 0x00 "USBCMD,USB Command Register" hexmask.long.byte 0x00 16.--23. 1. "ITC,ITC" bitfld.long 0x00 15. "FS_2,FS_2" "0,1" newline bitfld.long 0x00 14. "ATDTW,ATDTW" "0,1" bitfld.long 0x00 13. "SUTW,SUTW" "0,1" newline bitfld.long 0x00 11. "ASPE,ASPE" "0,1" bitfld.long 0x00 8.--9. "ASP,ASP" "0,1,2,3" newline bitfld.long 0x00 6. "IAA,IAA" "0,1" bitfld.long 0x00 5. "ASE,ASE" "0: Do not process the Asynchronous Schedule,1: Use the ASYNCLISTADDR register to access the.." newline bitfld.long 0x00 4. "PSE,PSE" "0: Do not process the Periodic Schedule,1: Use the PERIODICLISTBASE register to access.." bitfld.long 0x00 2.--3. "FS_1,FS_1" "0,1,2,3" newline bitfld.long 0x00 1. "RST,RST" "0,1" bitfld.long 0x00 0. "RS,RS" "0,1" group.long 0x144++0x03 line.long 0x00 "USBSTS,USB Status Register" bitfld.long 0x00 25. "TI1,TI1" "0,1" bitfld.long 0x00 24. "TI0,TI0" "0,1" newline rbitfld.long 0x00 16. "NAKI,NAKI" "0,1" bitfld.long 0x00 15. "AS,AS" "0,1" newline bitfld.long 0x00 14. "PS,PS" "0,1" bitfld.long 0x00 13. "RCL,RCL" "0,1" newline bitfld.long 0x00 12. "HCH,HCH" "0,1" bitfld.long 0x00 10. "ULPII,ULPII" "0,1" newline bitfld.long 0x00 8. "SLI,SLI" "0,1" bitfld.long 0x00 7. "SRI,SRI" "0,1" newline bitfld.long 0x00 6. "URI,URI" "0,1" bitfld.long 0x00 5. "AAI,AAI" "0,1" newline bitfld.long 0x00 4. "SEI,SEI" "0,1" bitfld.long 0x00 3. "FRI,FRI" "0,1" newline bitfld.long 0x00 2. "PCI,PCI" "0,1" bitfld.long 0x00 1. "UEI,UEI" "0,1" newline bitfld.long 0x00 0. "UI,UI" "0,1" group.long 0x148++0x03 line.long 0x00 "USBINTR,Interrupt Enable Register" bitfld.long 0x00 25. "TIE1,TIE1" "0,1" bitfld.long 0x00 24. "TIE0,TIE0" "0,1" newline bitfld.long 0x00 19. "UPIE,UPIE" "0,1" bitfld.long 0x00 18. "UAIE,UAIE" "0,1" newline bitfld.long 0x00 16. "NAKE,NAKE" "0,1" bitfld.long 0x00 10. "ULPIE,ULPIE" "0,1" newline bitfld.long 0x00 8. "SLE,SLE" "0,1" bitfld.long 0x00 7. "SRE,SRE" "0,1" newline bitfld.long 0x00 6. "URE,URE" "0,1" bitfld.long 0x00 5. "AAE,AAE" "0,1" newline bitfld.long 0x00 4. "SEE,SEE" "0,1" bitfld.long 0x00 3. "FRE,FRE" "0,1" newline bitfld.long 0x00 2. "PCE,PCE" "0,1" bitfld.long 0x00 1. "UEE,UEE" "0,1" newline bitfld.long 0x00 0. "UE,UE" "0,1" group.long 0x14C++0x03 line.long 0x00 "FRINDEX,USB Frame Index" hexmask.long.word 0x00 0.--13. 1. "FRINDEX,FRINDEX" group.long 0x154++0x03 line.long 0x00 "DEVICEADDR,Device Address" hexmask.long.byte 0x00 25.--31. 1. "USBADR,USBADR" bitfld.long 0x00 24. "USBADRA,USBADRA" "0,1" group.long 0x154++0x03 line.long 0x00 "PERIODICLISTBASE,Frame List Base Address" hexmask.long.tbyte 0x00 12.--31. 1. "BASEADR,BASEADR" group.long 0x158++0x03 line.long 0x00 "ASYNCLISTADDR,Next Asynch" hexmask.long 0x00 5.--31. 1. "ASYBASE,ASYBASE" group.long 0x158++0x03 line.long 0x00 "ENDPTLISTADDR,Endpoint List Address" hexmask.long.tbyte 0x00 11.--31. 1. "EPBASE,EPBASE" group.long 0x160++0x03 line.long 0x00 "BURSTSIZE,Programmable Burst Size" hexmask.long.word 0x00 8.--16. 1. "TXPBURST,TXPBURST" hexmask.long.byte 0x00 0.--7. 1. "RXPBURST,RXPBURST" group.long 0x164++0x03 line.long 0x00 "TXFILLTUNING,TX FIFO Fill Tuning" bitfld.long 0x00 16.--21. "TXFIFOTHRES,TXFIFOTHRES" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8.--12. "TXSCHHEALTH,TXSCHHEALTH" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline hexmask.long.byte 0x00 0.--7. 1. "TXSCHOH,TXSCHOH" group.long 0x178++0x03 line.long 0x00 "ENDPTNAK,Endpoint NAK" hexmask.long.byte 0x00 16.--23. 1. "EPTN,EPTN" hexmask.long.byte 0x00 0.--7. 1. "EPRN,EPRN" group.long 0x17C++0x03 line.long 0x00 "ENDPTNAKEN,Endpoint NAK Enable" hexmask.long.byte 0x00 16.--23. 1. "EPTNE,EPTNE" hexmask.long.byte 0x00 0.--7. 1. "EPRNE,EPRNE" rgroup.long 0x180++0x03 line.long 0x00 "CONFIGFLAG,Configure Flag Register" bitfld.long 0x00 0. "CF,CF" "0: Port routing control logic default-routes..,1: Port routing control logic default-routes all.." group.long 0x184++0x03 line.long 0x00 "PORTSC1,Port Status & Control" bitfld.long 0x00 30.--31. "PTS_1,PTS_1" "0,1,2,3" bitfld.long 0x00 29. "STS,STS" "0,1" newline bitfld.long 0x00 28. "PTW,PTW" "0: Select the 8-bit UTMI interface [60MHz],1: Select the 16-bit UTMI interface [30MHz]" bitfld.long 0x00 26.--27. "PSPD,PSPD" "0: Full Speed,1: Low Speed,2: High Speed,3: UNDEFINED" newline bitfld.long 0x00 25. "PTS_2,PTS_2" "0,1" bitfld.long 0x00 24. "PFSC,PFSC" "0: Normal operation,1: Forced to full speed" newline bitfld.long 0x00 23. "PHCD,PHCD" "0: Enable PHY clock,1: Disable PHY clock" bitfld.long 0x00 22. "WKOC,WKOC" "0,1" newline bitfld.long 0x00 21. "WKDC,WKDC" "0,1" bitfld.long 0x00 20. "WKCN,WKCN" "0,1" newline bitfld.long 0x00 16.--19. "PTC,PTC" "0: TEST_MODE_DISABLE,1: J_STATE,2: K_STATE,3: SE0 (host) / NAK (device),4: Packet,5: FORCE_ENABLE_HS,6: FORCE_ENABLE_FS,7: FORCE_ENABLE_LS,?..." bitfld.long 0x00 14.--15. "PIC,PIC" "0: Port indicators are off,1: PORT_IND_AMBER,2: PORT_IND_GREEN,3: UNDEFINED" newline bitfld.long 0x00 13. "PO,PO" "0,1" bitfld.long 0x00 12. "PP,PP" "0,1" newline bitfld.long 0x00 10.--11. "LS,LS" "0: SE0,1: K_STATE,2: J_STATE,3: UNDEFINED" rbitfld.long 0x00 9. "HSP,HSP" "0,1" newline bitfld.long 0x00 8. "PR,PR" "0,1" bitfld.long 0x00 7. "SUSP,SUSP" "0,1" newline bitfld.long 0x00 6. "FPR,FPR" "0,1" bitfld.long 0x00 5. "OCC,OCC" "0,1" newline rbitfld.long 0x00 4. "OCA,OCA" "0: This port does not have an over-current..,1: This port currently has an over-current.." bitfld.long 0x00 3. "PEC,PEC" "0,1" newline bitfld.long 0x00 2. "PE,PE" "0,1" bitfld.long 0x00 1. "CSC,CSC" "0,1" newline rbitfld.long 0x00 0. "CCS,CCS" "0,1" group.long 0x1A4++0x03 line.long 0x00 "OTGSC,On-The-Go Status & control" bitfld.long 0x00 30. "DPIE,DPIE" "0,1" bitfld.long 0x00 29. "EN_1MS,EN_1MS" "0,1" newline bitfld.long 0x00 28. "BSEIE,BSEIE" "0,1" bitfld.long 0x00 27. "BSVIE,BSVIE" "0,1" newline bitfld.long 0x00 26. "ASVIE,ASVIE" "0,1" bitfld.long 0x00 25. "AVVIE,AVVIE" "0,1" newline bitfld.long 0x00 24. "IDIE,IDIE" "0,1" bitfld.long 0x00 22. "DPIS,DPIS" "0,1" newline bitfld.long 0x00 21. "STATUS_1MS,STATUS_1MS" "0,1" bitfld.long 0x00 20. "BSEIS,BSEIS" "0,1" newline bitfld.long 0x00 19. "BSVIS,BSVIS" "0,1" bitfld.long 0x00 18. "ASVIS,ASVIS" "0,1" newline bitfld.long 0x00 17. "AVVIS,AVVIS" "0,1" bitfld.long 0x00 16. "IDIS,IDIS" "0,1" newline rbitfld.long 0x00 14. "DPS,DPS" "0,1" rbitfld.long 0x00 13. "TOG_1MS,TOG_1MS" "0,1" newline rbitfld.long 0x00 12. "BSE,BSE" "0,1" rbitfld.long 0x00 11. "BSV,BSV" "0,1" newline rbitfld.long 0x00 10. "ASV,ASV" "0,1" rbitfld.long 0x00 9. "AVV,AVV" "0,1" newline rbitfld.long 0x00 8. "ID,ID" "0,1" bitfld.long 0x00 5. "IDPU,IDPU" "0,1" newline bitfld.long 0x00 4. "DP,DP" "0,1" bitfld.long 0x00 3. "OT,OT" "0,1" newline bitfld.long 0x00 1. "VC,VC" "0,1" bitfld.long 0x00 0. "VD,VD" "0,1" group.long 0x1A8++0x03 line.long 0x00 "USBMODE,USB Device Mode" bitfld.long 0x00 4. "SDIS,SDIS" "0,1" bitfld.long 0x00 3. "SLOM,SLOM" "0: Setup Lockouts On (default),1: Setup Lockouts Off" newline bitfld.long 0x00 2. "ES,ES" "0: Little Endian [Default],1: BIG_ENDIAN" bitfld.long 0x00 0.--1. "CM,CM" "0: Idle [Default for combination host/device],?,2: Device Controller [Default for device only..,3: Host Controller [Default for host only.." group.long 0x1AC++0x03 line.long 0x00 "ENDPTSETUPSTAT,Endpoint Setup Status" hexmask.long.word 0x00 0.--15. 1. "ENDPTSETUPSTAT,ENDPTSETUPSTAT" group.long 0x1B0++0x03 line.long 0x00 "ENDPTPRIME,Endpoint Prime" hexmask.long.byte 0x00 16.--23. 1. "PETB,PETB" hexmask.long.byte 0x00 0.--7. 1. "PERB,PERB" group.long 0x1B4++0x03 line.long 0x00 "ENDPTFLUSH,Endpoint Flush" hexmask.long.byte 0x00 16.--23. 1. "FETB,FETB" hexmask.long.byte 0x00 0.--7. 1. "FERB,FERB" rgroup.long 0x1B8++0x03 line.long 0x00 "ENDPTSTAT,Endpoint Status" hexmask.long.byte 0x00 16.--23. 1. "ETBR,ETBR" hexmask.long.byte 0x00 0.--7. 1. "ERBR,ERBR" group.long 0x1BC++0x03 line.long 0x00 "ENDPTCOMPLETE,Endpoint Complete" hexmask.long.byte 0x00 16.--23. 1. "ETCE,ETCE" hexmask.long.byte 0x00 0.--7. 1. "ERCE,ERCE" group.long 0x1C0++0x03 line.long 0x00 "ENDPTCTRL0,Endpoint Control0" bitfld.long 0x00 23. "TXE,TXE" "0,1" bitfld.long 0x00 18.--19. "TXT,TXT" "0,1,2,3" newline bitfld.long 0x00 16. "TXS,TXS" "0,1" bitfld.long 0x00 7. "RXE,RXE" "0,1" newline bitfld.long 0x00 2.--3. "RXT,RXT" "0,1,2,3" bitfld.long 0x00 0. "RXS,RXS" "0,1" repeat 7. (strings "1" "2" "3" "4" "5" "6" "7" )(list 0x00 0x04 0x08 0x0C 0x10 0x14 0x18 ) group.long ($2+0x1C4)++0x03 line.long 0x00 "ENDPTCTRL$1,Endpoint Control $1" bitfld.long 0x00 23. "TXE,TXE" "0,1" bitfld.long 0x00 22. "TXR,TXR" "0,1" newline bitfld.long 0x00 21. "TXI,TXI" "0,1" bitfld.long 0x00 18.--19. "TXT,TXT" "0,1,2,3" newline bitfld.long 0x00 17. "TXD,TXD" "0,1" bitfld.long 0x00 16. "TXS,TXS" "0,1" newline bitfld.long 0x00 7. "RXE,RXE" "0,1" bitfld.long 0x00 6. "RXR,RXR" "0,1" newline bitfld.long 0x00 5. "RXI,RXI" "0,1" bitfld.long 0x00 2.--3. "RXT,RXT" "0,1,2,3" newline bitfld.long 0x00 1. "RXD,RXD" "0,1" bitfld.long 0x00 0. "RXS,RXS" "0,1" repeat.end tree.end tree "USB1NC (USBNC)" base ad:0x29920200 group.long 0x00++0x03 line.long 0x00 "CTRL1,USB OTG Control 1 Register" rbitfld.long 0x00 31. "WIR,WIR" "0: No wake-up interrupt request received,1: Wake-up Interrupt Request received" bitfld.long 0x00 29. "WKUP_DPDM_EN,Wake-up on DPDM change enable" "0: DPDM changes wake-up to be disabled only when..,1: (Default) DPDM changes wake-up to be enabled.." newline bitfld.long 0x00 17. "WKUP_VBUS_EN,WKUP_VBUS_EN" "0: WKUP_VBUS_DIS,1: WKUP_VBUS_EN" bitfld.long 0x00 16. "WKUP_ID_EN,WKUP_ID_EN" "0: WKUP_ID_DIS,1: WKUP_ID_EN" newline bitfld.long 0x00 15. "WKUP_SW,WKUP_SW" "0: INACTIVE,1: Force wake-up" bitfld.long 0x00 14. "WKUP_SW_EN,WKUP_SW_EN" "0: SW_WKUP_DIS,1: SW_WKUP_EN" newline bitfld.long 0x00 10. "WIE,WIE" "0: Interrupt Disabled,1: Interrupt Enabled" bitfld.long 0x00 9. "PWR_POL,PWR_POL" "0: PMIC Power Pin is Low active,1: PMIC Power Pin is High active" newline bitfld.long 0x00 8. "OVER_CUR_POL,OVER_CUR_POL" "0: High active (high on this signal represents..,1: Low active (low on this signal represents an.." bitfld.long 0x00 7. "OVER_CUR_DIS,OVER_CUR_DIS" "0: Enables overcurrent detection,1: Disables overcurrent detection" group.long 0x04++0x03 line.long 0x00 "CTRL2,USB OTG Control 2 Register" eventfld.long 0x00 31. "UTMI_CLK_VLD,UTMI_CLK_VLD" "0: DEFAULT,?..." bitfld.long 0x00 3. "LOWSPEED_EN,LOWSPEED_EN" "0: DEFAULT,?..." newline bitfld.long 0x00 2. "AUTURESUME_EN,Auto Resume Enable" "0: DEFAULT,?..." bitfld.long 0x00 0.--1. "VBUS_SOURCE_SEL,VBUS_SOURCE_SEL" "0: VBUS_VALID,1: SESS_VALID_1,2: SESS_VALID_2,3: SESS_VALID_3" group.long 0x10++0x03 line.long 0x00 "HSIC_CTRL,USB Host HSIC Control Register" rbitfld.long 0x00 31. "CLK_VLD,CLK_VLD" "0: INVALID,1: VALID" bitfld.long 0x00 12. "HSIC_EN,HSIC_EN" "0: Disabled,1: Enabled" newline bitfld.long 0x00 11. "HSIC_CLK_ON,HSIC_CLK_ON" "0: INACTIVE,1: ACTIVE" tree.end tree "USBDCD" repeat 2. (list 0. 1.) (list ad:0x29910800 ad:0x29930800) tree "USBDCD$1" base $2 group.long 0x00++0x03 line.long 0x00 "CONTROL,Control register" bitfld.long 0x00 25. "SR,Software Reset" "0: Do not perform a software reset,1: Perform a software reset" bitfld.long 0x00 24. "START,Start Change Detection Sequence" "0: Do not start the sequence,1: Initiate the charger detection sequence" newline bitfld.long 0x00 17. "BC12,BC12" "0: Compatible with BC1.1 (default),1: Compatible with BC1.2" bitfld.long 0x00 16. "IE,Interrupt Enable" "0: Disable interrupts to the system,1: Enable interrupts to the system" newline rbitfld.long 0x00 8. "IF,Interrupt Flag" "0: No interrupt is pending,1: An interrupt is pending" bitfld.long 0x00 0. "IACK,Interrupt Acknowledge" "0: Do not clear the interrupt,1: Clear the IF bit (interrupt flag)" group.long 0x04++0x03 line.long 0x00 "CLOCK,Clock register" hexmask.long.word 0x00 2.--11. 1. "CLOCK_SPEED,Numerical Value of Clock Speed in Binary" bitfld.long 0x00 0. "CLOCK_UNIT,Unit of Measurement Encoding for Clock Speed" "0: kHz Speed (between 1 kHz and 1023 kHz),1: MHz Speed (between 1 MHz and 1023 MHz)" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status register" bitfld.long 0x00 22. "ACTIVE,Active Status Indicator" "0: The sequence is not running,1: The sequence is running" bitfld.long 0x00 21. "TO,Timeout Flag" "0: The detection sequence has not been running..,1: It has been over 1 s since the data pin.." newline bitfld.long 0x00 20. "ERR,Error Flag" "0: No sequence errors,1: Error in the detection sequence" bitfld.long 0x00 18.--19. "SEQ_STAT,Charger Detection Sequence Status" "0: The module is either not enabled or the..,1: Data pin contact detection is complete,2: Charging port detection is complete,3: Charger type detection is complete" newline bitfld.long 0x00 16.--17. "SEQ_RES,Charger Detection Sequence Results" "0: No results to report,1: Attached to an SDP,2: Attached to a charging port,3: Attached to a DCP" group.long 0x0C++0x03 line.long 0x00 "SIGNAL_OVERRIDE,Signal Override Register" bitfld.long 0x00 0.--1. "PS,Phase Selection" "0: No overrides,?,2: Enables VDP_SRC voltage source for the USB_DP..,?..." group.long 0x10++0x03 line.long 0x00 "TIMER0,TIMER0 register" hexmask.long.word 0x00 16.--25. 1. "TSEQ_INIT,Sequence Initiation Time" hexmask.long.word 0x00 0.--11. 1. "TUNITCON,Unit Connection Timer Elapse (in ms)" group.long 0x14++0x03 line.long 0x00 "TIMER1,TIMER1 register" hexmask.long.word 0x00 16.--25. 1. "TDCD_DBNC,Time Period to Debounce D+ Signal" hexmask.long.word 0x00 0.--9. 1. "TVDPSRC_ON,Time Period Comparator Enabled" group.long 0x18++0x03 line.long 0x00 "TIMER2_BC11,TIMER2_BC11 register" hexmask.long.word 0x00 16.--25. 1. "TVDPSRC_CON,Time Period Before Enabling D+ Pullup" bitfld.long 0x00 0.--3. "CHECK_DM,Time Before Check of D- Line" "?,1: 1ms - 15ms,2: 1ms - 15ms,3: 1ms - 15ms,4: 1ms - 15ms,5: 1ms - 15ms,6: 1ms - 15ms,7: 1ms - 15ms,8: 1ms - 15ms,9: 1ms - 15ms,10: 1ms - 15ms,?..." group.long 0x18++0x03 line.long 0x00 "TIMER2_BC12,TIMER2_BC12 register" hexmask.long.word 0x00 16.--25. 1. "TWAIT_AFTER_PRD,TWAIT_AFTER_PRD" hexmask.long.word 0x00 0.--9. 1. "TVDMSRC_ON,TVDMSRC_ON" tree.end repeat.end tree.end tree "USDHC (Ultra Secured Digital Host Controller)" repeat 3. (list 0. 1. 2.) (list ad:0x298D0000 ad:0x298E0000 ad:0x298F0000) tree "USDHC$1" base $2 group.long 0x00++0x03 line.long 0x00 "DS_ADDR,DMA System Address" hexmask.long 0x00 0.--31. 1. "DS_ADDR,System address" group.long 0x04++0x03 line.long 0x00 "BLK_ATT,Block Attributes" hexmask.long.word 0x00 16.--31. 1. "BLKCNT,Blocks count for current transfer" newline hexmask.long.word 0x00 0.--12. 1. "BLKSIZE,Transfer block size" group.long 0x08++0x03 line.long 0x00 "CMD_ARG,Command Argument" hexmask.long 0x00 0.--31. 1. "CMDARG,Command argument" group.long 0x0C++0x03 line.long 0x00 "CMD_XFR_TYP,Command Transfer Type" bitfld.long 0x00 24.--29. "CMDINX,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 22.--23. "CMDTYP,Command type" "0: Normal other commands,1: Suspend CMD52 for writing bus suspend in CCCR,2: Resume CMD52 for writing function select in..,3: Abort CMD12 CMD52 for writing I/O Abort in CCCR" newline bitfld.long 0x00 21. "DPSEL,Data present select" "0: No data present,1: Data present" newline bitfld.long 0x00 20. "CICEN,Command index check enable" "0: Disable command index check,1: Enables command index check" newline bitfld.long 0x00 19. "CCCEN,Command CRC check enable" "0: Disables command CRC check,1: Enables command CRC check" newline bitfld.long 0x00 16.--17. "RSPTYP,Response type select" "0: No response,1: Response length 136,2: Response length 48,3: Response length 48 check busy after response" rgroup.long 0x10++0x03 line.long 0x00 "CMD_RSP0,Command Response0" hexmask.long 0x00 0.--31. 1. "CMDRSP0,Command response 0" rgroup.long 0x14++0x03 line.long 0x00 "CMD_RSP1,Command Response1" hexmask.long 0x00 0.--31. 1. "CMDRSP1,Command response 1" rgroup.long 0x18++0x03 line.long 0x00 "CMD_RSP2,Command Response2" hexmask.long 0x00 0.--31. 1. "CMDRSP2,Command response 2" rgroup.long 0x1C++0x03 line.long 0x00 "CMD_RSP3,Command Response3" hexmask.long 0x00 0.--31. 1. "CMDRSP3,Command response 3" group.long 0x20++0x03 line.long 0x00 "DATA_BUFF_ACC_PORT,Data Buffer Access Port" hexmask.long 0x00 0.--31. 1. "DATCONT,Data content" rgroup.long 0x24++0x03 line.long 0x00 "PRES_STATE,Present State" hexmask.long.byte 0x00 24.--31. 1. "DLSL,DATA[7:0] line signal level" newline bitfld.long 0x00 23. "CLSL,CMD line signal level" "0,1" newline bitfld.long 0x00 19. "WPSPL,Write protect switch pin level" "0: Write protected (WP = 1),1: Write enabled (WP = 0)" newline bitfld.long 0x00 18. "CDPL,Card detect pin level" "0: No card present (CD_B = 1),1: Card present (CD_B = 0)" newline bitfld.long 0x00 16. "CINST,Card inserted" "0: Power on reset or no card,1: Card inserted" newline bitfld.long 0x00 15. "TSCD,Tap select change done" "0: Delay cell select change is not finished,1: Delay cell select change is finished" newline bitfld.long 0x00 12. "RTR,Re-Tuning Request (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Fixed or well tuned sampling clock,1: Sampling clock needs re-tuning" newline bitfld.long 0x00 11. "BREN,Buffer read enable" "0: Read disable,1: Read enable" newline bitfld.long 0x00 10. "BWEN,Buffer write enable" "0: Write disable,1: Write enable" newline bitfld.long 0x00 9. "RTA,Read transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x00 8. "WTA,Write transfer active" "0: No valid data,1: Transferring data" newline bitfld.long 0x00 7. "SDOFF,SD clock gated off internally" "0: SD clock is active,1: SD clock is gated off" newline bitfld.long 0x00 6. "PEROFF,IPG_PERCLK gated off internally" "0: IPG_PERCLK is active,1: IPG_PERCLK is gated off" newline bitfld.long 0x00 5. "HCKOFF,HCLK gated off internally" "0: HCLK is active,1: HCLK is gated off" newline bitfld.long 0x00 4. "IPGOFF,Peripheral clock gated off internally" "0: Peripheral clock is active,1: Peripheral clock is gated off" newline bitfld.long 0x00 3. "SDSTB,SD clock stable" "0: Clock is changing frequency and not stable,1: Clock is stable" newline bitfld.long 0x00 2. "DLA,Data line active" "0: DATA line inactive,1: DATA line active" newline bitfld.long 0x00 1. "CDIHB,Command Inhibit Data (DATA)" "0: Can issue command that uses the DATA line,1: Cannot issue command that uses the DATA line" newline bitfld.long 0x00 0. "CIHB,Command inhibit (CMD)" "0: Can issue command using only CMD line,1: Cannot issue command" group.long 0x28++0x03 line.long 0x00 "PROT_CTRL,Protocol Control" bitfld.long 0x00 30. "NON_EXACT_BLK_RD,Non-exact block" "0: The block read is exact block,1: The block read is non-exact block" newline bitfld.long 0x00 26. "WECRM,Wakeup event enable on SD card removal" "0: Disables wakeup event enable on SD card removal,1: Enables wakeup event enable on SD card removal" newline bitfld.long 0x00 25. "WECINS,Wakeup event enable on SD card insertion" "0: Disable wakeup event enable on SD card..,1: Enable wakeup event enable on SD card insertion" newline bitfld.long 0x00 24. "WECINT,Wakeup event enable on card interrupt" "0: Disables wakeup event enable on card interrupt,1: Enables wakeup event enable on card interrupt" newline bitfld.long 0x00 20. "RD_DONE_NO_8CLK,Read performed number 8 clock" "0,1" newline bitfld.long 0x00 19. "IABG,Interrupt at block gap" "0: Disables interrupt at block gap,1: Enables interrupt at block gap" newline bitfld.long 0x00 18. "RWCTL,Read wait control" "0: Disables read wait control and stop SD clock..,1: Enables read wait control and assert read.." newline bitfld.long 0x00 17. "CREQ,Continue request" "0: No effect,1: Restart" newline bitfld.long 0x00 16. "SABGREQ,Stop at block gap request" "0: SABGREQ_b,1: SABGREQ_A" newline bitfld.long 0x00 8.--9. "DMASEL,DMA select" "0: No DMA or simple DMA is selected,1: ADMA1 is selected,2: ADMA2 is selected,?..." newline bitfld.long 0x00 7. "CDSS,Card detect signal selection" "0: Card detection level is selected (for normal..,1: Card detection test level is selected (for.." newline bitfld.long 0x00 6. "CDTL,Card detect test level" "0: Card detect test level is 0 no card inserted,1: Card detect test level is 1 card inserted" newline bitfld.long 0x00 4.--5. "EMODE,Endian mode" "0: Big endian mode,1: Half word big endian mode,2: Little endian mode,?..." newline bitfld.long 0x00 3. "D3CD,DATA3 as card detection pin" "0: DATA3 does not monitor card insertion,1: DATA3 as card detection pin" newline bitfld.long 0x00 1.--2. "DTW,Data transfer width" "0: 1-bit mode,1: 4-bit mode,2: 8-bit mode,?..." group.long 0x2C++0x03 line.long 0x00 "SYS_CTRL,System Control" bitfld.long 0x00 28. "RSTT,Reset tuning" "0,1" newline bitfld.long 0x00 27. "INITA,Initialization active" "0,1" newline bitfld.long 0x00 26. "RSTD,Software reset for data line" "0: No reset,1: RSTD_A" newline bitfld.long 0x00 25. "RSTC,Software reset for CMD line" "0: No reset,1: RSTC_A" newline bitfld.long 0x00 24. "RSTA,Software reset for all" "0: No reset,1: RSTA_A" newline bitfld.long 0x00 23. "IPP_RST_N,Hardware reset" "0,1" newline bitfld.long 0x00 16.--19. "DTOCV,Data timeout counter value" "0: SDCLK x 2 32,1: SDCLK x 2 33,2: SDCLK x 2 18,3: SDCLK x 2 19,?,?,?,?,?,?,?,?,?,13: SDCLK x 2 29 recommend to use for other..,14: SDCLK x 2 30 recommend to use for..,15: SDCLK x 2 31 recommend to use for HS400 mode" newline hexmask.long.byte 0x00 8.--15. 1. "SDCLKFS,SDCLK frequency select" newline bitfld.long 0x00 4.--7. "DVS,Divisor" "0: Divide-by-1,1: Divide-by-2,?,?,?,?,?,?,?,?,?,?,?,?,14: Divide-by-15,15: Divide-by-16" group.long 0x30++0x03 line.long 0x00 "INT_STATUS,Interrupt Status" eventfld.long 0x00 28. "DMAE,DMA error" "0: No error,1: DMAE_b" newline eventfld.long 0x00 26. "TNE,Tuning error: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x00 24. "AC12E,Auto CMD12 error" "0: No error,1: AC12E_b" newline eventfld.long 0x00 22. "DEBE,Data end bit error" "0: No error,1: DEBE_b" newline eventfld.long 0x00 21. "DCE,Data CRC error" "0: No error,1: DCE_b" newline eventfld.long 0x00 20. "DTOE,Data timeout error" "0: No error,1: Time out" newline eventfld.long 0x00 19. "CIE,Command index error" "0: No error,1: CIE_b" newline eventfld.long 0x00 18. "CEBE,Command end bit error" "0: No error,1: End bit error generated" newline eventfld.long 0x00 17. "CCE,Command CRC error" "0: No error,1: CRC error generated" newline eventfld.long 0x00 16. "CTOE,Command timeout error" "0: No error,1: Time out" newline rbitfld.long 0x00 15. "ERR_INT_STATUS,Error Interrupt Status" "0,1" newline eventfld.long 0x00 14. "CQI,Command queuing interrupt" "0,1" newline eventfld.long 0x00 13. "TP,Tuning pass:(only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0,1" newline eventfld.long 0x00 12. "RTE,Re-tuning event: (only for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Re-tuning is not required,1: Re-tuning should be performed" newline eventfld.long 0x00 8. "CINT,Card interrupt" "0: No card interrupt,1: Generate card interrupt" newline eventfld.long 0x00 7. "CRM,Card removal" "0: Card state unstable or inserted,1: Card removed" newline eventfld.long 0x00 6. "CINS,Card insertion" "0: Card state unstable or removed,1: Card inserted" newline eventfld.long 0x00 5. "BRR,Buffer read ready" "0: Not ready to read buffer,1: Ready to read buffer" newline eventfld.long 0x00 4. "BWR,Buffer write ready" "0: Not ready to write buffer,1: Ready to write buffer" newline eventfld.long 0x00 3. "DINT,DMA interrupt" "0: No DMA interrupt,1: DMA interrupt is generated" newline eventfld.long 0x00 2. "BGE,Block gap event" "0: No block gap event,1: Transaction stopped at block gap" newline eventfld.long 0x00 1. "TC,Transfer complete" "0: Transfer does not complete,1: Transfer complete" newline eventfld.long 0x00 0. "CC,Command complete" "0: Command not complete,1: Command complete" group.long 0x34++0x03 line.long 0x00 "INT_STATUS_EN,Interrupt Status Enable" bitfld.long 0x00 28. "DMAESEN,DMA error status enable" "0: DMASEN_b,1: DMASEN_a" newline bitfld.long 0x00 26. "TNESEN,Tuning error status enable" "0: TNESEN_A,1: TNESEN_b" newline bitfld.long 0x00 24. "AC12ESEN,Auto CMD12 error status enable" "0: AC12ESEN_A,1: AC12ESEN_b" newline bitfld.long 0x00 22. "DEBESEN,Data end bit error status enable" "0: DBESEN_A,1: DBESEN_b" newline bitfld.long 0x00 21. "DCESEN,Data CRC error status enable" "0: DCESEN_A,1: DCESEN_b" newline bitfld.long 0x00 20. "DTOESEN,Data timeout error status enable" "0: DTOESEN_A,1: DTOESEN_b" newline bitfld.long 0x00 19. "CIESEN,Command index error status enable" "0: CIESEN_A,1: CIESEN_b" newline bitfld.long 0x00 18. "CEBESEN,Command end bit error status enable" "0: CEBESEN_A,1: CEBESEN_b" newline bitfld.long 0x00 17. "CCESEN,Command CRC error status enable" "0: CCESEN_A,1: CCESEN_b" newline bitfld.long 0x00 16. "CTOESEN,Command timeout error status enable" "0: CTOSEN_A,1: CTOSEN_b" newline bitfld.long 0x00 14. "CQISEN,Command queuing status enable" "0: CQISEN_A,1: CQISEN_b" newline bitfld.long 0x00 13. "TPSEN,Tuning pass status enable" "0: TPSEN_D,1: TPSEN_C" newline bitfld.long 0x00 12. "RTESEN,Re-tuning event status enable" "0: RTESEN_A,1: RTESEN_b" newline bitfld.long 0x00 8. "CINTSEN,Card interrupt status enable" "0: CINTSEN_A,1: CINTSEN_b" newline bitfld.long 0x00 7. "CRMSEN,Card removal status enable" "0: CRMSEN_A,1: CRMSEN_b" newline bitfld.long 0x00 6. "CINSSEN,Card insertion status enable" "0: CINSEN_A,1: CINSEN_b" newline bitfld.long 0x00 5. "BRRSEN,Buffer read ready status enable" "0: BRRSEN_A,1: BRREN_b" newline bitfld.long 0x00 4. "BWRSEN,Buffer write ready status enable" "0: BWRSEN_A,1: BWRSEN_b" newline bitfld.long 0x00 3. "DINTSEN,DMA interrupt status enable" "0: DINTSEN_A,1: DINTSEN_b" newline bitfld.long 0x00 2. "BGESEN,Block gap event status enable" "0: BGESEN_A,1: BGESEN_b" newline bitfld.long 0x00 1. "TCSEN,Transfer complete status enable" "0: TCSEN_b,1: TCSEN_A" newline bitfld.long 0x00 0. "CCSEN,Command complete status enable" "0: CCSEN_a,1: CCSEN_b" group.long 0x38++0x03 line.long 0x00 "INT_SIGNAL_EN,Interrupt Signal Enable" bitfld.long 0x00 28. "DMAEIEN,DMA error interrupt enable" "0: DMAEIEN_B,1: DMAEIEN_a" newline bitfld.long 0x00 26. "TNEIEN,Tuning error interrupt enable" "0: TNEIEN_B,1: TNEIEN_a" newline bitfld.long 0x00 24. "AC12EIEN,Auto CMD12 error interrupt enable" "0: AC12EIEN_b,1: AC12EIEN_a" newline bitfld.long 0x00 22. "DEBEIEN,Data end bit error interrupt enable" "0: DEBEIEN_B,1: DEBEIEN_a" newline bitfld.long 0x00 21. "DCEIEN,Data CRC error interrupt enable" "0: DCEIEN_B,1: DCEIEN_a" newline bitfld.long 0x00 20. "DTOEIEN,Data timeout error interrupt enable" "0: DTOEIEN_B,1: DTOEIEN_a" newline bitfld.long 0x00 19. "CIEIEN,Command index error interrupt enable" "0: CIEIEN_B,1: CIEIEN_a" newline bitfld.long 0x00 18. "CEBEIEN,Command end bit error interrupt enable" "0: CEBEIEN_b,1: CEBEIEN_a" newline bitfld.long 0x00 17. "CCEIEN,Command CRC error interrupt enable" "0: CCEIEN_B,1: CCEIEN_a" newline bitfld.long 0x00 16. "CTOEIEN,Command timeout error interrupt enable" "0: CTOEIEN_b,1: CTOEIEN_a" newline bitfld.long 0x00 14. "CQIIEN,Command queuing signal enable" "0: CQIIEN_T,1: CQIIEN_S" newline bitfld.long 0x00 13. "TPIEN,Tuning pass interrupt enable" "0: TPIEN_T,1: TPIEN_S" newline bitfld.long 0x00 12. "RTEIEN,Re-tuning event interrupt enable" "0: RTEIEN_O,1: RTEIEN_N" newline bitfld.long 0x00 8. "CINTIEN,Card interrupt enable" "0: CINTIEN_b,1: CINTIEN_a" newline bitfld.long 0x00 7. "CRMIEN,Card removal interrupt enable" "0: CRMIEN_a,1: CRMIEN_b" newline bitfld.long 0x00 6. "CINSIEN,Card insertion interrupt enable" "0: CINSIEN_a,1: CINSIEN_b" newline bitfld.long 0x00 5. "BRRIEN,Buffer read ready interrupt enable" "0: BRRIEN_b,1: BRRIEN_a" newline bitfld.long 0x00 4. "BWRIEN,Buffer write ready interrupt enable" "0: BWRIEN_a,1: BWRIEN_b" newline bitfld.long 0x00 3. "DINTIEN,DMA interrupt enable" "0: DINTIEN_b,1: DINTIEN_a" newline bitfld.long 0x00 2. "BGEIEN,Block gap event interrupt enable" "0: BGIEN_a,1: BGIEN_b" newline bitfld.long 0x00 1. "TCIEN,Transfer complete interrupt enable" "0: TCIEN_a,1: TCIEN_b" newline bitfld.long 0x00 0. "CCIEN,Command complete interrupt enable" "0: CCIEN_a,1: CCIEN_b" group.long 0x3C++0x03 line.long 0x00 "AUTOCMD12_ERR_STATUS,Auto CMD12 Error Status" bitfld.long 0x00 23. "SMP_CLK_SEL,Sample clock select" "0: Fixed clock is used to sample data,1: Tuned clock is used to sample data" newline bitfld.long 0x00 22. "EXECUTE_TUNING,Execute tuning" "0: Tuning procedure is aborted,1: Start tuning procedure" newline rbitfld.long 0x00 7. "CNIBAC12E,Command not issued by Auto CMD12 error" "0: CNIBAC12E_B,1: CNIBAC12E_a" newline rbitfld.long 0x00 4. "AC12IE,Auto CMD12 / 23 index error" "0: AC12IE_B,1: Error the CMD index in response is not CMD12/23" newline rbitfld.long 0x00 3. "AC12CE,Auto CMD12 / 23 CRC error" "0: No CRC error,1: CRC error met in Auto CMD12/23 response" newline rbitfld.long 0x00 2. "AC12EBE,Auto CMD12 / 23 end bit error" "0: AC12EBE_B,1: End bit error generated" newline rbitfld.long 0x00 1. "AC12TOE,Auto CMD12 / 23 timeout error" "0: AC12TOE_B,1: AC12TOE_a" newline rbitfld.long 0x00 0. "AC12NE,Auto CMD12 not executed" "0: AC12NE_B,1: Not executed" group.long 0x40++0x03 line.long 0x00 "HOST_CTRL_CAP,Host Controller Capabilities" rbitfld.long 0x00 26. "VS18,Voltage support 1.8 V" "0: 1.8 V not supported,1: 1.8 V supported" newline rbitfld.long 0x00 25. "VS30,Voltage support 3.0 V" "0: 3.0 V not supported,1: 3.0 V supported" newline rbitfld.long 0x00 24. "VS33,Voltage support 3.3 V" "0: 3.3 V not supported,1: 3.3 V supported" newline rbitfld.long 0x00 23. "SRS,Suspend / resume support" "0: Not supported,1: Supported" newline rbitfld.long 0x00 22. "DMAS,DMA support" "0: DMA not supported,1: DMA supported" newline rbitfld.long 0x00 21. "HSS,High speed support" "0: High speed not supported,1: High speed supported" newline rbitfld.long 0x00 20. "ADMAS,ADMA support" "0: Advanced DMA not supported,1: Advanced DMA supported" newline rbitfld.long 0x00 16.--18. "MBL,Max block length" "0: 512 bytes,1: 1024 bytes,2: 2048 bytes,3: 4096 bytes,?..." newline bitfld.long 0x00 13. "USE_TUNING_SDR50,Use Tuning for SDR50" "0: SDR50 does not support tuning,1: SDR50 supports tuning" newline rbitfld.long 0x00 2. "DDR50_SUPPORT,DDR50 support" "0,1" newline rbitfld.long 0x00 1. "SDR104_SUPPORT,SDR104 support" "0,1" newline rbitfld.long 0x00 0. "SDR50_SUPPORT,SDR50 support" "0,1" group.long 0x44++0x03 line.long 0x00 "WTMK_LVL,Watermark Level" hexmask.long.byte 0x00 16.--23. 1. "WR_WML,Write watermark level" newline hexmask.long.byte 0x00 0.--7. 1. "RD_WML,Read watermark level" group.long 0x48++0x03 line.long 0x00 "MIX_CTRL,Mixer Control" bitfld.long 0x00 27. "EN_HS400_MODE,Enable enhance HS400 mode" "0,1" newline bitfld.long 0x00 26. "HS400_MODE,Enable HS400 mode" "0,1" newline bitfld.long 0x00 25. "FBCLK_SEL,Feedback clock source selection (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Feedback clock comes from the loopback CLK,1: Feedback clock comes from the ipp_card_clk_out" newline bitfld.long 0x00 24. "AUTO_TUNE_EN,Auto tuning enable (Only used for SD3.0 SDR104 mode and and eMMC HS200 mode)" "0: Disable auto tuning,1: Enable auto tuning" newline bitfld.long 0x00 23. "SMP_CLK_SEL,Clock selection" "0: Fixed clock is used to sample data / cmd,1: Tuned clock is used to sample data / cmd" newline bitfld.long 0x00 22. "EXE_TUNE,Execute tuning: (Only used for SD3.0 SDR104 mode and eMMC HS200 mode)" "0: Not tuned or tuning completed,1: Execute tuning" newline bitfld.long 0x00 7. "AC23EN,Auto CMD23 enable" "0,1" newline bitfld.long 0x00 6. "NIBBLE_POS,Nibble position indication" "0,1" newline bitfld.long 0x00 5. "MSBSEL,Multi / Single block select" "0: Single block,1: Multiple blocks" newline bitfld.long 0x00 4. "DTDSEL,Data transfer direction select" "0: Write (Host to card),1: Read (Card to host)" newline bitfld.long 0x00 3. "DDR_EN,Dual data rate mode selection" "0,1" newline bitfld.long 0x00 2. "AC12EN,Auto CMD12 enable" "0: AC12EN_B,1: AC12EN_a" newline bitfld.long 0x00 1. "BCEN,Block count enable" "0: Disable,1: BCEN_a" newline bitfld.long 0x00 0. "DMAEN,DMA enable" "0: DMAIN_B,1: DMAIN_a" group.long 0x50++0x03 line.long 0x00 "FORCE_EVENT,Force Event" bitfld.long 0x00 31. "FEVTCINT,Force event card interrupt" "0,1" newline bitfld.long 0x00 28. "FEVTDMAE,Force event DMA error" "0,1" newline bitfld.long 0x00 26. "FEVTTNE,Force tuning error" "0,1" newline bitfld.long 0x00 24. "FEVTAC12E,Force event Auto Command 12 error" "0,1" newline bitfld.long 0x00 22. "FEVTDEBE,Force event data end bit error" "0,1" newline bitfld.long 0x00 21. "FEVTDCE,Force event data CRC error" "0,1" newline bitfld.long 0x00 20. "FEVTDTOE,Force event data time out error" "0,1" newline bitfld.long 0x00 19. "FEVTCIE,Force event command index error" "0,1" newline bitfld.long 0x00 18. "FEVTCEBE,Force event command end bit error" "0,1" newline bitfld.long 0x00 17. "FEVTCCE,Force event command CRC error" "0,1" newline bitfld.long 0x00 16. "FEVTCTOE,Force event command time out error" "0,1" newline bitfld.long 0x00 7. "FEVTCNIBAC12E,Force event command not executed by Auto Command 12 error" "0,1" newline bitfld.long 0x00 4. "FEVTAC12IE,Force event Auto Command 12 index error" "0,1" newline bitfld.long 0x00 3. "FEVTAC12EBE,Force event Auto Command 12 end bit error" "0,1" newline bitfld.long 0x00 2. "FEVTAC12CE,Force event auto command 12 CRC error" "0,1" newline bitfld.long 0x00 1. "FEVTAC12TOE,Force event auto command 12 time out error" "0,1" newline bitfld.long 0x00 0. "FEVTAC12NE,Force event auto command 12 not executed" "0,1" rgroup.long 0x54++0x03 line.long 0x00 "ADMA_ERR_STATUS,ADMA Error Status" bitfld.long 0x00 3. "ADMADCE,ADMA descriptor error" "0: ADMADCE_B,1: ADMADCE_a" newline bitfld.long 0x00 2. "ADMALME,ADMA length mismatch error" "0: ADMAES_B,1: ADMAES_a" newline bitfld.long 0x00 0.--1. "ADMAES,ADMA error state (when ADMA error is occurred)" "0,1,2,3" group.long 0x58++0x03 line.long 0x00 "ADMA_SYS_ADDR,ADMA System Address" hexmask.long 0x00 2.--31. 1. "ADS_ADDR,ADMA system address" group.long 0x60++0x03 line.long 0x00 "DLL_CTRL,DLL (Delay Line) Control" bitfld.long 0x00 28.--31. "DLL_CTRL_REF_UPDATE_INT,DLL control loop update interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 20.--27. 1. "DLL_CTRL_SLV_UPDATE_INT,Slave delay line update interval" newline bitfld.long 0x00 16.--18. "DLL_CTRL_SLV_DLY_TARGET1,DLL slave delay target1" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 9.--15. 1. "DLL_CTRL_SLV_OVERRIDE_VAL,DLL slave override val" newline bitfld.long 0x00 8. "DLL_CTRL_SLV_OVERRIDE,DLL slave override" "0,1" newline bitfld.long 0x00 7. "DLL_CTRL_GATE_UPDATE,DLL gate update" "0,1" newline bitfld.long 0x00 3.--6. "DLL_CTRL_SLV_DLY_TARGET0,DLL slave delay target0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2. "DLL_CTRL_SLV_FORCE_UPD,DLL slave delay line" "0,1" newline bitfld.long 0x00 1. "DLL_CTRL_RESET,DLL reset" "0,1" newline bitfld.long 0x00 0. "DLL_CTRL_ENABLE,DLL and delay chain" "0,1" rgroup.long 0x64++0x03 line.long 0x00 "DLL_STATUS,DLL Status" hexmask.long.byte 0x00 9.--15. 1. "DLL_STS_REF_SEL,Reference delay line select taps" newline hexmask.long.byte 0x00 2.--8. 1. "DLL_STS_SLV_SEL,Slave delay line select status" newline bitfld.long 0x00 1. "DLL_STS_REF_LOCK,Reference DLL lock status" "0,1" newline bitfld.long 0x00 0. "DLL_STS_SLV_LOCK,Slave delay-line lock status" "0,1" group.long 0x68++0x03 line.long 0x00 "CLK_TUNE_CTRL_STATUS,CLK Tuning Control and Status" rbitfld.long 0x00 31. "PRE_ERR,PRE error" "0,1" newline hexmask.long.byte 0x00 24.--30. 1. "TAP_SEL_PRE,TAP_SEL_PRE" newline rbitfld.long 0x00 20.--23. "TAP_SEL_OUT,Delay cells added on the feedback clock between CLK_PRE and CLK_OUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 16.--19. "TAP_SEL_POST,Delay cells added on the feedback clock between CLK_OUT and CLK_POST" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline rbitfld.long 0x00 15. "NXT_ERR,NXT error" "0,1" newline hexmask.long.byte 0x00 8.--14. 1. "DLY_CELL_SET_PRE,delay cells on the feedback clock between the feedback clock and CLK_PRE" newline bitfld.long 0x00 4.--7. "DLY_CELL_SET_OUT,Delay cells on the feedback clock between CLK_PRE and CLK_OUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DLY_CELL_SET_POST,Delay cells on the feedback clock between CLK_OUT and CLK_POST" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x70++0x03 line.long 0x00 "STROBE_DLL_CTRL,Strobe DLL control" bitfld.long 0x00 28.--31. "STROBE_DLL_CTRL_REF_UPDATE_INT,Strobe DLL control reference update interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 20.--27. 1. "STROBE_DLL_CTRL_SLV_UPDATE_INT,Strobe DLL control slave update interval" newline hexmask.long.byte 0x00 9.--15. 1. "STROBE_DLL_CTRL_SLV_OVERRIDE_VAL,Strobe DLL control slave Override value" newline bitfld.long 0x00 8. "STROBE_DLL_CTRL_SLV_OVERRIDE,Strobe DLL control slave override" "0,1" newline bitfld.long 0x00 7. "STROBE_DLL_CTRL_GATE_UPDATE,Strobe DLL control gate update" "0,1" newline bitfld.long 0x00 3.--6. "STROBE_DLL_CTRL_SLV_DLY_TARGET,Strobe DLL Control Slave Delay Target" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 2. "STROBE_DLL_CTRL_SLV_FORCE_UPD,Strobe DLL control slave force updated" "0,1" newline bitfld.long 0x00 1. "STROBE_DLL_CTRL_RESET,Strobe DLL control reset" "0,1" newline bitfld.long 0x00 0. "STROBE_DLL_CTRL_ENABLE,Strobe DLL control enable" "0,1" rgroup.long 0x74++0x03 line.long 0x00 "STROBE_DLL_STATUS,Strobe DLL status" hexmask.long.byte 0x00 9.--15. 1. "STROBE_DLL_STS_REF_SEL,Strobe DLL status reference select" newline hexmask.long.byte 0x00 2.--8. 1. "STROBE_DLL_STS_SLV_SEL,Strobe DLL status slave select" newline bitfld.long 0x00 1. "STROBE_DLL_STS_REF_LOCK,Strobe DLL status reference lock" "0,1" newline bitfld.long 0x00 0. "STROBE_DLL_STS_SLV_LOCK,Strobe DLL status slave lock" "0,1" group.long 0xC0++0x03 line.long 0x00 "VEND_SPEC,Vendor Specific Register" bitfld.long 0x00 31. "CMD_BYTE_EN,Byte access" "0: CMD_BYTE_EN_a,1: CMD_BYTE_EN_b" newline bitfld.long 0x00 15. "CRC_CHK_DIS,CRC Check Disable" "0: Check CRC16 for every read data packet and..,1: Ignore CRC16 check for every read data packet.." newline bitfld.long 0x00 8. "FRC_SDCLK_ON,Force CLK" "0: CLK active or inactive is fully controlled by..,1: Force CLK active" newline bitfld.long 0x00 3. "AC12_WR_CHKBUSY_EN,Check busy enable" "0: Do not check busy after auto CMD12 for write..,1: Check busy after auto CMD12 for write data.." newline bitfld.long 0x00 2. "CONFLICT_CHK_EN,Conflict check enable" "0: Conflict check disable,1: Conflict check enable" newline bitfld.long 0x00 1. "VSELECT,Voltage selection" "0: Change the voltage to high voltage range..,1: Change the voltage to low voltage range.." group.long 0xC4++0x03 line.long 0x00 "MMC_BOOT,eMMC Boot" hexmask.long.word 0x00 16.--31. 1. "BOOT_BLK_CNT,Stop At Block Gap value of automatic mode" newline bitfld.long 0x00 8. "DISABLE_TIME_OUT,Time out" "0: disable_timeout_a,1: disable_timeout_b" newline bitfld.long 0x00 7. "AUTO_SABG_EN,Auto stop at block gap" "0,1" newline bitfld.long 0x00 6. "BOOT_EN,Boot enable" "0: Fast boot disable,1: Fast boot enable" newline bitfld.long 0x00 5. "BOOT_MODE,Boot mode" "0: BOOT_mode_a,1: Alternative boot" newline bitfld.long 0x00 4. "BOOT_ACK,BOOT ACK" "0: BOOT_ACK_a,1: BOOT_ACK_b" newline bitfld.long 0x00 0.--3. "DTOCV_ACK,DTOCV_ACK" "0: SDCLK x 2^32,1: SDCLK x 2^33,2: SDCLK x 2^18,3: SDCLK x 2^19,4: SDCLK x 2^20,5: SDCLK x 2^21,6: SDCLK x 2^22,7: SDCLK x 2^23,?,?,?,?,?,?,14: SDCLK x 2^30,15: SDCLK x 2^31" group.long 0xC8++0x03 line.long 0x00 "VEND_SPEC2,Vendor Specific 2 Register" hexmask.long.word 0x00 16.--31. 1. "FBCLK_TAP_SEL,Enable extra delay on internal feedback clock" newline bitfld.long 0x00 15. "EN_32K_CLK,Enable 32khz clock for card detection" "0,1" newline bitfld.long 0x00 12. "ACMD23_ARGU2_EN,Argument2 register enable for ACMD23" "0: ACMD23_ARGU2_EN_B,1: Argument2 register enable for ACMD23 sharing.." newline bitfld.long 0x00 11. "HS400_RD_CLK_STOP_EN,HS400 read clock stop enable" "0,1" newline bitfld.long 0x00 10. "HS400_WR_CLK_STOP_EN,HS400 write clock stop enable" "0,1" newline bitfld.long 0x00 6. "TUNING_CMD_EN,Tuning command enable" "0: Auto tuning circuit does not check the CMD line,1: Auto tuning circuit checks the CMD line" newline bitfld.long 0x00 5. "TUNING_1bit_EN,Tuning 1bit enable" "0,1" newline bitfld.long 0x00 4. "TUNING_8bit_EN,Tuning 8bit enable" "0,1" newline bitfld.long 0x00 3. "CARD_INT_D3_TEST,Card interrupt detection test" "0: Check the card interrupt only when DATA3 is..,1: Check the card interrupt by ignoring the.." group.long 0xCC++0x03 line.long 0x00 "TUNING_CTRL,Tuning Control" bitfld.long 0x00 24. "STD_TUNING_EN,Standard tuning circuit and procedure enable" "0,1" newline bitfld.long 0x00 20.--22. "TUNING_WINDOW,Data window" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16.--18. "TUNING_STEP,TUNING_STEP" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--15. 1. "TUNING_COUNTER,Tuning counter" newline bitfld.long 0x00 7. "DIS_CMD_CHK_FOR_STD_TUNING,Disable command check for standard tuning" "0,1" newline hexmask.long.byte 0x00 0.--6. 1. "TUNING_START_TAP,Tuning start" rgroup.long 0x100++0x03 line.long 0x00 "CQVER,Command Queuing Version" bitfld.long 0x00 8.--11. "MAJOR_VN,eMMC major version number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "MINOR_VN,eMMC minor version number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "VERSION_SUFFIX,eMMC version suffix" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x104++0x03 line.long 0x00 "CQCAP,Command Queuing Capabilities" bitfld.long 0x00 12.--15. "ITCFMUL,Internal timer clock frequency multiplier" "?,1: ITCFMUL_a,2: ITCFMUL_B,3: ITCFMUL_C,4: ITCFMUL_D,5: ITCFMUL_E,?..." newline hexmask.long.word 0x00 0.--9. 1. "ITCFVAL,Internal timer clock frequency value" group.long 0x108++0x03 line.long 0x00 "CQCFG,Command Queuing Configuration" bitfld.long 0x00 12. "DCMDE,Direct command (DCMD) enable" "0: Task descriptor in slot #31 is a Data..,1: Task descriptor in slot #31 is a DCMD Task.." newline bitfld.long 0x00 8. "TDS,Task descriptor size" "0: Task descriptor size is 64 bits,1: Task descriptor size is 128 bits" newline bitfld.long 0x00 0. "CQUE,Command queuing enable" "0,1" group.long 0x10C++0x03 line.long 0x00 "CQCTL,Command Queuing Control" bitfld.long 0x00 8. "CLEAR,Clear all tasks" "0,1" newline bitfld.long 0x00 0. "HALT,Halt" "0,1" group.long 0x110++0x03 line.long 0x00 "CQIS,Command Queuing Interrupt Status" eventfld.long 0x00 3. "TCL,Task cleared" "0,1" newline eventfld.long 0x00 2. "RED,Response error detected interrupt" "0,1" newline eventfld.long 0x00 1. "TCC,Task complete interrupt" "0,1" newline eventfld.long 0x00 0. "HAC,Halt complete interrupt" "0,1" group.long 0x114++0x03 line.long 0x00 "CQISTE,Command Queuing Interrupt Status Enable" bitfld.long 0x00 3. "TCL_STE,Task cleared status enable" "0: CQIS[TCL] is disabled,1: CQIS[TCL] is set when its interrupt condition.." newline bitfld.long 0x00 2. "RED_STE,Response error detected status enable" "0: CQIS[RED]is disabled,1: CQIS[RED] is set when its interrupt condition.." newline bitfld.long 0x00 1. "TCC_STE,Task complete status enable" "0: CQIS[TCC] is disabled,1: CQIS[TCC] is set when its interrupt condition.." newline bitfld.long 0x00 0. "HAC_STE,Halt complete status enable" "0: CQIS[HAC] is disabled,1: CQIS[HAC] is set when its interrupt condition.." group.long 0x118++0x03 line.long 0x00 "CQISGE,Command Queuing Interrupt Signal Enable" bitfld.long 0x00 3. "TCL_SGE,Task cleared signal enable" "0,1" newline bitfld.long 0x00 2. "RED_SGE,Response error detected signal enable" "0,1" newline bitfld.long 0x00 1. "TCC_SGE,Task complete signal enable" "0,1" newline bitfld.long 0x00 0. "HAC_SGE,Halt complete signal enable" "0,1" group.long 0x11C++0x03 line.long 0x00 "CQIC,Command Queuing Interrupt Coalescing" bitfld.long 0x00 31. "ICENDIS,Interrupt coalescing enable/disable" "0,1" newline rbitfld.long 0x00 20. "ICSB,Interrupt coalescing status" "0: No task completions have occurred since last..,1: At least one task completion has been counted.." newline bitfld.long 0x00 16. "ICCTR,Counter and timer reset" "0,1" newline bitfld.long 0x00 15. "ICCTHWEN,Interrupt coalescing counter threshold write enable" "0,1" newline bitfld.long 0x00 8.--12. "ICCTH,Interrupt coalescing counter threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 7. "ICTOVALWEN,Interrupt coalescing timeout value write enable" "0,1" newline hexmask.long.byte 0x00 0.--6. 1. "ICTOVAL,Interrupt coalescing timeout value" group.long 0x120++0x03 line.long 0x00 "CQTDLBA,Command Queuing Task Descriptor List Base Address" hexmask.long 0x00 0.--31. 1. "TDLBA,Task descriptor list base address" group.long 0x124++0x03 line.long 0x00 "CQTDLBAU,Command Queuing Task Descriptor List Base Address Upper 32 Bits" hexmask.long 0x00 0.--31. 1. "TDLBAU,Task descriptor list base address" group.long 0x128++0x03 line.long 0x00 "CQTDBR,Command Queuing Task Doorbell" hexmask.long 0x00 0.--31. 1. "TDBR,Task doorbell" group.long 0x12C++0x03 line.long 0x00 "CQTCN,Command Queuing Task Completion Notification" hexmask.long 0x00 0.--31. 1. "TCN,Task complete notification" rgroup.long 0x130++0x03 line.long 0x00 "CQDQS,Command Queuing Device Queue Status" hexmask.long 0x00 0.--31. 1. "DQS,Device queue status" rgroup.long 0x134++0x03 line.long 0x00 "CQDPT,Command Queuing Device Pending Tasks" hexmask.long 0x00 0.--31. 1. "DPT,Device pending tasks" group.long 0x138++0x03 line.long 0x00 "CQTCLR,Command Queuing Task Clear" hexmask.long 0x00 0.--31. 1. "TCLR,Task clear" group.long 0x140++0x03 line.long 0x00 "CQSSC1,Command Queuing Send Status Configuration 1" bitfld.long 0x00 16.--19. "CBC,Send status command block counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "CIT,Send status command idle timer" group.long 0x144++0x03 line.long 0x00 "CQSSC2,Command Queuing Send Status Configuration 2" hexmask.long.word 0x00 0.--15. 1. "SSC2,Send queue status RCA" rgroup.long 0x148++0x03 line.long 0x00 "CQCRDCT,Command Queuing Command Response for Direct-Command Task" hexmask.long 0x00 0.--31. 1. "CRDCT,Direct command last response" group.long 0x150++0x03 line.long 0x00 "CQRMEM,Command Queuing Response Mode Error Mask" hexmask.long 0x00 0.--31. 1. "RMEM,Response mode error mask" rgroup.long 0x154++0x03 line.long 0x00 "CQTERRI,Command Queuing Task Error Information" bitfld.long 0x00 31. "DTEFV,Data transfer error fields valid" "0,1" newline bitfld.long 0x00 24.--28. "DTETID,Data transfer error task ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 16.--21. "DTECI,Data transfer error command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 15. "RMEFV,Response mode error fields valid" "0,1" newline bitfld.long 0x00 8.--12. "RMETID,Response mode error task ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--5. "RMECI,Response mode error command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x158++0x03 line.long 0x00 "CQCRI,Command Queuing Command Response Index" bitfld.long 0x00 0.--5. "LCMDRI,Last command response index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x15C++0x03 line.long 0x00 "CQCRA,Command Queuing Command Response Argument" hexmask.long 0x00 0.--31. 1. "LCMDRA,Last command response argument" tree.end repeat.end tree.end tree "WDOG (Watchdog Timer Unit)" repeat 6. (list 0. 1. 2. 3. 4. 5.) (list ad:0x2802C000 ad:0x2802D000 ad:0x28101000 ad:0x292A0000 ad:0x292B0000 ad:0x2DB20000) tree "WDOG$1" base $2 group.long 0x00++0x03 line.long 0x00 "CS,Watchdog Control and Status Register" bitfld.long 0x00 15. "WIN,Watchdog Window" "0: Window mode disabled,1: Window mode enabled" eventfld.long 0x00 14. "FLG,Watchdog Interrupt Flag" "0: No interrupt occurred,1: An interrupt occurred" newline bitfld.long 0x00 13. "CMD32EN,Enables or disables WDOG support for 32-bit (otherwise 16-bit or 8-bit) refresh/unlock command write words" "0: Disables support for 32-bit refresh/unlock..,1: Enables support for 32-bit refresh/unlock.." bitfld.long 0x00 12. "PRES,Watchdog prescaler" "0: 256 prescaler disabled,1: 256 prescaler enabled" newline rbitfld.long 0x00 11. "ULK,Unlock status" "0: WDOG is locked,1: WDOG is unlocked" rbitfld.long 0x00 10. "RCS,Reconfiguration Success" "0: Reconfiguring WDOG,1: Reconfiguration is successful" newline bitfld.long 0x00 8.--9. "CLK,Watchdog Clock" "0,1,2,3" bitfld.long 0x00 7. "EN,Watchdog Enable" "0: Watchdog disabled,1: Watchdog enabled" newline bitfld.long 0x00 6. "INT,Watchdog Interrupt" "0: Watchdog interrupts are disabled,1: Watchdog interrupts are enabled" bitfld.long 0x00 5. "UPDATE,Allow updates" "0: Updates not allowed,1: Updates allowed" newline bitfld.long 0x00 3.--4. "TST,Watchdog Test" "0: Watchdog test mode disabled,1: Watchdog user mode enabled,2: Watchdog test mode enabled only the low byte..,3: Watchdog test mode enabled only the high byte.." bitfld.long 0x00 2. "DBG,Debug Enable" "0: Watchdog disabled in chip debug mode,1: Watchdog enabled in chip debug mode" newline bitfld.long 0x00 1. "WAIT,Wait Enable" "0: Watchdog disabled in chip wait mode,1: Watchdog enabled in chip wait mode" bitfld.long 0x00 0. "STOP,Stop Enable" "0: Watchdog disabled in chip stop mode,1: Watchdog enabled in chip stop mode" group.long 0x04++0x03 line.long 0x00 "CNT,Watchdog Counter Register" hexmask.long.byte 0x00 8.--15. 1. "CNTHIGH,High byte of the Watchdog Counter" hexmask.long.byte 0x00 0.--7. 1. "CNTLOW,Low byte of the Watchdog Counter" group.long 0x08++0x03 line.long 0x00 "TOVAL,Watchdog Timeout Value Register" hexmask.long.byte 0x00 8.--15. 1. "TOVALHIGH,High byte of the timeout value" hexmask.long.byte 0x00 0.--7. 1. "TOVALLOW,Low byte of the timeout value" group.long 0x0C++0x03 line.long 0x00 "WIN,Watchdog Window Register" hexmask.long.byte 0x00 8.--15. 1. "WINHIGH,High byte of Watchdog Window" hexmask.long.byte 0x00 0.--7. 1. "WINLOW,Low byte of Watchdog Window" tree.end repeat.end tree.end tree "WUU" tree "WUU0" base ad:0x28028000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" hexmask.long.byte 0x00 24.--31. 1. "PINS,Pin Number" hexmask.long.byte 0x00 16.--23. 1. "MODULES,Module Number" newline hexmask.long.byte 0x00 8.--15. 1. "DMAS,DMA Number" hexmask.long.byte 0x00 0.--7. 1. "FILTERS,Filter Number" group.long 0x08++0x03 line.long 0x00 "PE1,Pin Enable 1" bitfld.long 0x00 30.--31. "WUPE15,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 28.--29. "WUPE14,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 26.--27. "WUPE13,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 24.--25. "WUPE12,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 22.--23. "WUPE11,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 20.--21. "WUPE10,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 18.--19. "WUPE9,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 16.--17. "WUPE8,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 14.--15. "WUPE7,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 12.--13. "WUPE6,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 10.--11. "WUPE5,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 8.--9. "WUPE4,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 6.--7. "WUPE3,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 4.--5. "WUPE2,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 2.--3. "WUPE1,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 0.--1. "WUPE0,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" group.long 0x0C++0x03 line.long 0x00 "PE2,Pin Enable 2" rbitfld.long 0x00 30.--31. "Reserved31,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" rbitfld.long 0x00 28.--29. "Reserved30,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline rbitfld.long 0x00 26.--27. "Reserved29,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" rbitfld.long 0x00 24.--25. "Reserved28,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 22.--23. "WUPE27,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 20.--21. "WUPE26,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 18.--19. "WUPE25,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 16.--17. "WUPE24,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 14.--15. "WUPE23,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 12.--13. "WUPE22,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 10.--11. "WUPE21,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 8.--9. "WUPE20,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 6.--7. "WUPE19,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 4.--5. "WUPE18,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 2.--3. "WUPE17,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 0.--1. "WUPE16,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" group.long 0x18++0x03 line.long 0x00 "ME,Module Interrupt Enable" bitfld.long 0x00 7. "WUME7,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 6. "WUME6,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 5. "WUME5,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 4. "WUME4,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 3. "WUME3,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 2. "WUME2,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 1. "WUME1,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 0. "WUME0,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" group.long 0x1C++0x03 line.long 0x00 "DE,Module DMA/Trigger Enable" rbitfld.long 0x00 7. "Reserved7,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" rbitfld.long 0x00 6. "Reserved6,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" newline rbitfld.long 0x00 5. "Reserved5,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" rbitfld.long 0x00 4. "Reserved4,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" newline rbitfld.long 0x00 3. "Reserved3,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" rbitfld.long 0x00 2. "Reserved2,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 1. "WUDE1,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 0. "WUDE0,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" group.long 0x20++0x03 line.long 0x00 "PF,Pin Flag" rbitfld.long 0x00 31. "Reserved31,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 30. "Reserved30,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 29. "Reserved29,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 28. "Reserved28,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 27. "WUF27,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 26. "WUF26,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 25. "WUF25,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 24. "WUF24,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 23. "WUF23,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 22. "WUF22,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 21. "WUF21,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 20. "WUF20,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 19. "WUF19,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 18. "WUF18,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 17. "WUF17,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 16. "WUF16,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 15. "WUF15,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 14. "WUF14,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 13. "WUF13,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 12. "WUF12,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 11. "WUF11,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 10. "WUF10,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 9. "WUF9,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 8. "WUF8,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 7. "WUF7,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 6. "WUF6,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 5. "WUF5,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 4. "WUF4,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 3. "WUF3,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 2. "WUF2,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 1. "WUF1,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 0. "WUF0,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rgroup.long 0x28++0x03 line.long 0x00 "MF,Module Interrupt Flag" bitfld.long 0x00 7. "MWUF7,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 6. "MWUF6,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 5. "MWUF5,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 4. "MWUF4,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 3. "MWUF3,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 2. "MWUF2,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 1. "MWUF1,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 0. "MWUF0,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" group.long 0x30++0x03 line.long 0x00 "FILT,Pin Filter" eventfld.long 0x00 31. "FILTF4,Filter 4 Flag" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 29.--30. "FILTE4,Filter 4 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" newline bitfld.long 0x00 24.--28. "FILTSEL4,Filter 4 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" eventfld.long 0x00 23. "FILTF3,Filter 3 Flag" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 21.--22. "FILTE3,Filter 3 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" bitfld.long 0x00 16.--20. "FILTSEL3,Filter 3 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" newline eventfld.long 0x00 15. "FILTF2,Filter 2 Flag" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 13.--14. "FILTE2,Filter 2 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" newline bitfld.long 0x00 8.--12. "FILTSEL2,Filter 2 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" eventfld.long 0x00 7. "FILTF1,Filter 1 Flag" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 5.--6. "FILTE1,Filter 1 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" bitfld.long 0x00 0.--4. "FILTSEL1,Filter 1 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" group.long 0x38++0x03 line.long 0x00 "PDC1,Pin DMA/Trigger Configuration 1" bitfld.long 0x00 30.--31. "WUPDC15,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 28.--29. "WUPDC14,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 26.--27. "WUPDC13,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 24.--25. "WUPDC12,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 22.--23. "WUPDC11,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 20.--21. "WUPDC10,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 18.--19. "WUPDC9,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 16.--17. "WUPDC8,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 14.--15. "WUPDC7,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 12.--13. "WUPDC6,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 10.--11. "WUPDC5,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 8.--9. "WUPDC4,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 6.--7. "WUPDC3,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 4.--5. "WUPDC2,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 2.--3. "WUPDC1,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 0.--1. "WUPDC0,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." group.long 0x3C++0x03 line.long 0x00 "PDC2,Pin DMA/Trigger Configuration 2" rbitfld.long 0x00 30.--31. "Reserved31,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." rbitfld.long 0x00 28.--29. "Reserved30,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline rbitfld.long 0x00 26.--27. "Reserved29,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." rbitfld.long 0x00 24.--25. "Reserved28,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 22.--23. "WUPDC27,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 20.--21. "WUPDC26,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 18.--19. "WUPDC25,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 16.--17. "WUPDC24,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 14.--15. "WUPDC23,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 12.--13. "WUPDC22,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 10.--11. "WUPDC21,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 8.--9. "WUPDC20,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 6.--7. "WUPDC19,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 4.--5. "WUPDC18,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 2.--3. "WUPDC17,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 0.--1. "WUPDC16,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." group.long 0x48++0x03 line.long 0x00 "FDC,Pin Filter DMA/Trigger Configuration" bitfld.long 0x00 6.--7. "FILTC4,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 4.--5. "FILTC3,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 2.--3. "FILTC2,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 0.--1. "FILTC1,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." group.long 0x50++0x03 line.long 0x00 "PMC,Pin Mode Configuration" rbitfld.long 0x00 31. "Reserved31,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 30. "Reserved30,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 29. "Reserved29,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 28. "Reserved28,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 27. "WUPMC27,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 26. "WUPMC26,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 25. "WUPMC25,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 24. "WUPMC24,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 23. "WUPMC23,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 22. "WUPMC22,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 21. "WUPMC21,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 20. "WUPMC20,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 19. "WUPMC19,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 18. "WUPMC18,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 17. "WUPMC17,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 16. "WUPMC16,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 15. "WUPMC15,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 14. "WUPMC14,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 13. "WUPMC13,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 12. "WUPMC12,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 11. "WUPMC11,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 10. "WUPMC10,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 9. "WUPMC9,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 8. "WUPMC8,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 7. "WUPMC7,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 6. "WUPMC6,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 5. "WUPMC5,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 4. "WUPMC4,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 3. "WUPMC3,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 2. "WUPMC2,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 1. "WUPMC1,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 0. "WUPMC0,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" group.long 0x58++0x03 line.long 0x00 "FMC,Pin Filter Mode Configuration" bitfld.long 0x00 3. "FILTM4,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 2. "FILTM3,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 1. "FILTM2,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 0. "FILTM1,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" tree.end tree "WUU1" base ad:0x29260000 rgroup.long 0x00++0x03 line.long 0x00 "VERID,Version ID" hexmask.long.byte 0x00 24.--31. 1. "MAJOR,Major Version Number" hexmask.long.byte 0x00 16.--23. 1. "MINOR,Minor Version Number" newline hexmask.long.word 0x00 0.--15. 1. "FEATURE,Feature Specification Number" rgroup.long 0x04++0x03 line.long 0x00 "PARAM,Parameter" hexmask.long.byte 0x00 24.--31. 1. "PINS,Pin Number" hexmask.long.byte 0x00 16.--23. 1. "MODULES,Module Number" newline hexmask.long.byte 0x00 8.--15. 1. "DMAS,DMA Number" hexmask.long.byte 0x00 0.--7. 1. "FILTERS,Filter Number" group.long 0x08++0x03 line.long 0x00 "PE1,Pin Enable 1" bitfld.long 0x00 30.--31. "WUPE15,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 28.--29. "WUPE14,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 26.--27. "WUPE13,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 24.--25. "WUPE12,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 22.--23. "WUPE11,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 20.--21. "WUPE10,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 18.--19. "WUPE9,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 16.--17. "WUPE8,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 14.--15. "WUPE7,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 12.--13. "WUPE6,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 10.--11. "WUPE5,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 8.--9. "WUPE4,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 6.--7. "WUPE3,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 4.--5. "WUPE2,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 2.--3. "WUPE1,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 0.--1. "WUPE0,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" rgroup.long 0x0C++0x03 line.long 0x00 "PE2,Pin Enable 2" bitfld.long 0x00 30.--31. "Reserved31,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 28.--29. "Reserved30,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 26.--27. "Reserved29,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 24.--25. "Reserved28,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 22.--23. "Reserved27,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 20.--21. "Reserved26,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 18.--19. "Reserved25,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 16.--17. "Reserved24,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 14.--15. "Reserved23,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 12.--13. "Reserved22,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 10.--11. "Reserved21,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 8.--9. "Reserved20,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 6.--7. "Reserved19,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 4.--5. "Reserved18,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" newline bitfld.long 0x00 2.--3. "Reserved17,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" bitfld.long 0x00 0.--1. "Reserved16,Wakeup pin enable for WUU_Pn" "0: Disable as a wakeup pin,1: Enable as a wakeup pin,2: Enable as a wakeup pin,3: Enable as a wakeup pin" group.long 0x18++0x03 line.long 0x00 "ME,Module Interrupt Enable" bitfld.long 0x00 7. "WUME7,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 6. "WUME6,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 5. "WUME5,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 4. "WUME4,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 3. "WUME3,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 2. "WUME2,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 1. "WUME1,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 0. "WUME0,Module iterrupt wakeup enable for module n" "0: DISABLE,1: ENABLE" rgroup.long 0x1C++0x03 line.long 0x00 "DE,Module DMA/Trigger Enable" bitfld.long 0x00 7. "Reserved7,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 6. "Reserved6,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 5. "Reserved5,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 4. "Reserved4,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 3. "Reserved3,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 2. "Reserved2,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" newline bitfld.long 0x00 1. "Reserved1,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" bitfld.long 0x00 0. "Reserved0,DMA/Trigger wakeup enable for module n" "0: DISABLE,1: ENABLE" group.long 0x20++0x03 line.long 0x00 "PF,Pin Flag" rbitfld.long 0x00 31. "Reserved31,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 30. "Reserved30,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 29. "Reserved29,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 28. "Reserved28,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 27. "Reserved27,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 26. "Reserved26,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 25. "Reserved25,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 24. "Reserved24,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 23. "Reserved23,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 22. "Reserved22,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 21. "Reserved21,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 20. "Reserved20,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 19. "Reserved19,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 18. "Reserved18,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline rbitfld.long 0x00 17. "Reserved17,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rbitfld.long 0x00 16. "Reserved16,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 15. "WUF15,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 14. "WUF14,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 13. "WUF13,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 12. "WUF12,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 11. "WUF11,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 10. "WUF10,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 9. "WUF9,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 8. "WUF8,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 7. "WUF7,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 6. "WUF6,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 5. "WUF5,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 4. "WUF4,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 3. "WUF3,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 2. "WUF2,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" newline eventfld.long 0x00 1. "WUF1,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" eventfld.long 0x00 0. "WUF0,Wakeup flag for WUU_Pn" "0: NO_FLAG,1: FLAG" rgroup.long 0x28++0x03 line.long 0x00 "MF,Module Interrupt Flag" bitfld.long 0x00 7. "MWUF7,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 6. "MWUF6,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 5. "MWUF5,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 4. "MWUF4,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 3. "MWUF3,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 2. "MWUF2,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 1. "MWUF1,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 0. "MWUF0,Wakeup flag for module n" "0: NO_FLAG,1: FLAG" group.long 0x30++0x03 line.long 0x00 "FILT,Pin Filter" eventfld.long 0x00 31. "FILTF4,Filter 4 Flag" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 29.--30. "FILTE4,Filter 4 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" newline bitfld.long 0x00 24.--28. "FILTSEL4,Filter 4 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" eventfld.long 0x00 23. "FILTF3,Filter 3 Flag" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 21.--22. "FILTE3,Filter 3 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" bitfld.long 0x00 16.--20. "FILTSEL3,Filter 3 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" newline eventfld.long 0x00 15. "FILTF2,Filter 2 Flag" "0: NO_FLAG,1: FLAG" bitfld.long 0x00 13.--14. "FILTE2,Filter 2 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" newline bitfld.long 0x00 8.--12. "FILTSEL2,Filter 2 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" eventfld.long 0x00 7. "FILTF1,Filter 1 Flag" "0: NO_FLAG,1: FLAG" newline bitfld.long 0x00 5.--6. "FILTE1,Filter 1 Enable" "0: Disable filter,1: Enable filter,2: Enable filter,3: Enable filter" bitfld.long 0x00 0.--4. "FILTSEL1,Filter 1 Pin Select" "0: Select WUU_P0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,31: Select WUU_P31" group.long 0x38++0x03 line.long 0x00 "PDC1,Pin DMA/Trigger Configuration 1" bitfld.long 0x00 30.--31. "WUPDC15,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 28.--29. "WUPDC14,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 26.--27. "WUPDC13,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 24.--25. "WUPDC12,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 22.--23. "WUPDC11,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 20.--21. "WUPDC10,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 18.--19. "WUPDC9,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 16.--17. "WUPDC8,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 14.--15. "WUPDC7,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 12.--13. "WUPDC6,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 10.--11. "WUPDC5,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 8.--9. "WUPDC4,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 6.--7. "WUPDC3,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 4.--5. "WUPDC2,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 2.--3. "WUPDC1,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 0.--1. "WUPDC0,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." rgroup.long 0x3C++0x03 line.long 0x00 "PDC2,Pin DMA/Trigger Configuration 2" bitfld.long 0x00 30.--31. "Reserved31,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 28.--29. "Reserved30,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 26.--27. "Reserved29,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 24.--25. "Reserved28,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 22.--23. "Reserved27,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 20.--21. "Reserved26,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 18.--19. "Reserved25,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 16.--17. "Reserved24,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 14.--15. "Reserved23,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 12.--13. "Reserved22,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 10.--11. "Reserved21,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 8.--9. "Reserved20,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 6.--7. "Reserved19,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 4.--5. "Reserved18,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 2.--3. "Reserved17,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 0.--1. "Reserved16,Wakeup pin configuration for WUU_Pn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." group.long 0x48++0x03 line.long 0x00 "FDC,Pin Filter DMA/Trigger Configuration" bitfld.long 0x00 6.--7. "FILTC4,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 4.--5. "FILTC3,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." newline bitfld.long 0x00 2.--3. "FILTC2,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." bitfld.long 0x00 0.--1. "FILTC1,Filter configuration for FILTn" "0: INTERRUPT,1: DMA request,2: Trigger event,?..." group.long 0x50++0x03 line.long 0x00 "PMC,Pin Mode Configuration" rbitfld.long 0x00 31. "Reserved31,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 30. "Reserved30,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 29. "Reserved29,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 28. "Reserved28,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 27. "Reserved27,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 26. "Reserved26,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 25. "Reserved25,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 24. "Reserved24,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 23. "Reserved23,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 22. "Reserved22,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 21. "Reserved21,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 20. "Reserved20,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 19. "Reserved19,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 18. "Reserved18,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline rbitfld.long 0x00 17. "Reserved17,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" rbitfld.long 0x00 16. "Reserved16,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 15. "WUPMC15,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 14. "WUPMC14,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 13. "WUPMC13,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 12. "WUPMC12,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 11. "WUPMC11,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 10. "WUPMC10,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 9. "WUPMC9,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 8. "WUPMC8,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 7. "WUPMC7,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 6. "WUPMC6,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 5. "WUPMC5,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 4. "WUPMC4,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 3. "WUPMC3,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 2. "WUPMC2,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 1. "WUPMC1,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 0. "WUPMC0,Wakeup pin mode configuration for WUU_Pn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" group.long 0x58++0x03 line.long 0x00 "FMC,Pin Filter Mode Configuration" bitfld.long 0x00 3. "FILTM4,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 2. "FILTM3,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" newline bitfld.long 0x00 1. "FILTM2,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" bitfld.long 0x00 0. "FILTM1,Filter Mode for FILTn" "0: Active only during Power Down/Deep Power Down..,1: Active during all power modes" tree.end tree.end tree "XRDC" base ad:0x292F0000 group.long 0x00++0x03 line.long 0x00 "CR,Control Register" rbitfld.long 0x00 30. "LK1,Lock Status" "0: The CR can be written by any secure privileged,1: The CR is locked (read-only) until the next.." rbitfld.long 0x00 16.--19. "DBDS,Deny by Default (DBD) Status" "0: Not in Deny by Default window,?,?,?,?,?,?,?,8: Deny by default and (S400 + CA35 SecPriv..,9: Deny by default and (S400 + CM33 allowed),10: Deny by default and (S400 + CM33 SecPriv..,11: Deny by default and (S400 + CM33 SecPriv +..,12: Deny by default and (S400 allowed),?,14: All accesses denied,15: All accesses allowed" newline bitfld.long 0x00 15. "GVLDC,Global Valid for MRCs" "0: XRDC MRCs are disabled,1: XRDC MRCs are enabled" bitfld.long 0x00 14. "GVLDP,Global Valid for PACs/MSCs" "0: XRDC PACs/MSCs are disabled,1: XRDC PACs/MSCs are enabled" newline rbitfld.long 0x00 1.--4. "HRL,Hardware Revision Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "GVLDM,Global Valid for MDACs(XRDC global enable/disable)" "0: XRDC MDACs are disabled,1: XRDC MDACs are enabled" rgroup.long 0xF0++0x03 line.long 0x00 "HWCFG0,Hardware Configuration Register 0" bitfld.long 0x00 28.--31. "MID,Module ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 26.--27. "NMSC,Number of MSCs" "0,1,2,3" newline bitfld.long 0x00 24.--25. "NPAC,Number of PACs" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. "NMRC,Number of MRCs" newline hexmask.long.byte 0x00 8.--15. 1. "NMSTR,Number of bus masters" hexmask.long.byte 0x00 0.--7. 1. "NDID,Number of domains" rgroup.long 0xF4++0x03 line.long 0x00 "HWCFG1,Hardware Configuration Register 1" bitfld.long 0x00 0.--3. "DID,Domain identifier number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xF8++0x03 line.long 0x00 "HWCFG2,Hardware Configuration Register 2" bitfld.long 0x00 31. "PIDP31,Process identifier" "0: Bus master 31 does not source a process..,1: Bus master 31 sources a process identifier.." bitfld.long 0x00 30. "PIDP30,Process identifier" "0: Bus master 30 does not source a process..,1: Bus master 30 sources a process identifier.." newline bitfld.long 0x00 29. "PIDP29,Process identifier" "0: Bus master 29 does not source a process..,1: Bus master 29 sources a process identifier.." bitfld.long 0x00 28. "PIDP28,Process identifier" "0: Bus master 28 does not source a process..,1: Bus master 28 sources a process identifier.." newline bitfld.long 0x00 27. "PIDP27,Process identifier" "0: Bus master 27 does not source a process..,1: Bus master 27 sources a process identifier.." bitfld.long 0x00 26. "PIDP26,Process identifier" "0: Bus master 26 does not source a process..,1: Bus master 26 sources a process identifier.." newline bitfld.long 0x00 25. "PIDP25,Process identifier" "0: Bus master 25 does not source a process..,1: Bus master 25 sources a process identifier.." bitfld.long 0x00 24. "PIDP24,Process identifier" "0: Bus master 24 does not source a process..,1: Bus master 24 sources a process identifier.." newline bitfld.long 0x00 23. "PIDP23,Process identifier" "0: Bus master 23 does not source a process..,1: Bus master 23 sources a process identifier.." bitfld.long 0x00 22. "PIDP22,Process identifier" "0: Bus master 22 does not source a process..,1: Bus master 22 sources a process identifier.." newline bitfld.long 0x00 21. "PIDP21,Process identifier" "0: Bus master 21 does not source a process..,1: Bus master 21 sources a process identifier.." bitfld.long 0x00 20. "PIDP20,Process identifier" "0: Bus master 20 does not source a process..,1: Bus master 20 sources a process identifier.." newline bitfld.long 0x00 19. "PIDP19,Process identifier" "0: Bus master 19 does not source a process..,1: Bus master 19 sources a process identifier.." bitfld.long 0x00 18. "PIDP18,Process identifier" "0: Bus master 18 does not source a process..,1: Bus master 18 sources a process identifier.." newline bitfld.long 0x00 17. "PIDP17,Process identifier" "0: Bus master 17 does not source a process..,1: Bus master 17 sources a process identifier.." bitfld.long 0x00 16. "PIDP16,Process identifier" "0: Bus master 16 does not source a process..,1: Bus master 16 sources a process identifier.." newline bitfld.long 0x00 15. "PIDP15,Process identifier" "0: Bus master 15 does not source a process..,1: Bus master 15 sources a process identifier.." bitfld.long 0x00 14. "PIDP14,Process identifier" "0: Bus master 14 does not source a process..,1: Bus master 14 sources a process identifier.." newline bitfld.long 0x00 13. "PIDP13,Process identifier" "0: Bus master 13 does not source a process..,1: Bus master 13 sources a process identifier.." bitfld.long 0x00 12. "PIDP12,Process identifier" "0: Bus master 12 does not source a process..,1: Bus master 12 sources a process identifier.." newline bitfld.long 0x00 11. "PIDP11,Process identifier" "0: Bus master 11 does not source a process..,1: Bus master 11 sources a process identifier.." bitfld.long 0x00 10. "PIDP10,Process identifier" "0: Bus master 10 does not source a process..,1: Bus master 10 sources a process identifier.." newline bitfld.long 0x00 9. "PIDP9,Process identifier" "0: Bus master 9 does not source a process..,1: Bus master 9 sources a process identifier.." bitfld.long 0x00 8. "PIDP8,Process identifier" "0: Bus master 8 does not source a process..,1: Bus master 8 sources a process identifier.." newline bitfld.long 0x00 7. "PIDP7,Process identifier" "0: Bus master 7 does not source a process..,1: Bus master 7 sources a process identifier.." bitfld.long 0x00 6. "PIDP6,Process identifier" "0: Bus master 6 does not source a process..,1: Bus master 6 sources a process identifier.." newline bitfld.long 0x00 5. "PIDP5,Process identifier" "0: Bus master 5 does not source a process..,1: Bus master 5 sources a process identifier.." bitfld.long 0x00 4. "PIDP4,Process identifier" "0: Bus master 4 does not source a process..,1: Bus master 4 sources a process identifier.." newline bitfld.long 0x00 3. "PIDP3,Process identifier" "0: Bus master 3 does not source a process..,1: Bus master 3 sources a process identifier.." bitfld.long 0x00 2. "PIDP2,Process identifier" "0: Bus master 2 does not source a process..,1: Bus master 2 sources a process identifier.." newline bitfld.long 0x00 1. "PIDP1,Process identifier" "0: Bus master 1 does not source a process..,1: Bus master 1 sources a process identifier.." bitfld.long 0x00 0. "PIDP0,Process identifier" "0: Bus master 0 does not source a process..,1: Bus master 0 sources a process identifier.." rgroup.long 0xFC++0x03 line.long 0x00 "HWCFG3,Hardware Configuration Register 3" hexmask.long 0x00 0.--31. 1. "PIDPn,Process identifier" repeat 16. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F ) rgroup.byte ($2+0x100)++0x00 line.byte 0x00 "MDACFG$1,Master Domain Assignment Configuration Register" bitfld.byte 0x00 7. "NCM,Non-CPU Master" "0: Bus master is a processor,1: Bus master is a non-processor" bitfld.byte 0x00 0.--3. "NMDAR,Number of master domain assignment registers for bus master m" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat.end rgroup.byte 0x110++0x00 line.byte 0x00 "MDACFG16,Master Domain Assignment Configuration Register" bitfld.byte 0x00 7. "NCM,Non-CPU Master" "0: Bus master is a processor,1: Bus master is a non-processor" bitfld.byte 0x00 0.--3. "NMDAR,Number of master domain assignment registers for bus master m" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat 13. (strings "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" )(list 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C ) rgroup.byte ($2+0x140)++0x00 line.byte 0x00 "MRCFG$1,Memory Region Configuration Register" bitfld.byte 0x00 0.--4. "NMRGD,Number of memory region descriptors for memory region controller n" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" repeat.end group.long 0x1FC++0x03 line.long 0x00 "FDID,Fault Domain ID" bitfld.long 0x00 0.--3. "FDID,Domain ID of Faulted Access" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" repeat 8. (increment 0 1) (increment 0 0x04) rgroup.long ($2+0x200)++0x03 line.long 0x00 "DERRLOC[$1],Domain Error Location Register $1" bitfld.long 0x00 20.--23. "MSCINST,MSC instance" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "PACINST,PAC instance" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.word 0x00 0.--15. 1. "MRCINST,MRC instance" repeat.end rgroup.long 0x400++0x03 line.long 0x00 "DERR_W0_0,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x404++0x03 line.long 0x00 "DERR_W1_0,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x408++0x03 line.long 0x00 "DERR_W2_0,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x40C++0x03 line.long 0x00 "DERR_W3_0,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x410++0x03 line.long 0x00 "DERR_W0_1,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x414++0x03 line.long 0x00 "DERR_W1_1,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x418++0x03 line.long 0x00 "DERR_W2_1,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x41C++0x03 line.long 0x00 "DERR_W3_1,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x420++0x03 line.long 0x00 "DERR_W0_2,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x424++0x03 line.long 0x00 "DERR_W1_2,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x428++0x03 line.long 0x00 "DERR_W2_2,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x42C++0x03 line.long 0x00 "DERR_W3_2,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x430++0x03 line.long 0x00 "DERR_W0_3,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x434++0x03 line.long 0x00 "DERR_W1_3,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x438++0x03 line.long 0x00 "DERR_W2_3,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x43C++0x03 line.long 0x00 "DERR_W3_3,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x440++0x03 line.long 0x00 "DERR_W0_4,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x444++0x03 line.long 0x00 "DERR_W1_4,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x448++0x03 line.long 0x00 "DERR_W2_4,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x44C++0x03 line.long 0x00 "DERR_W3_4,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x450++0x03 line.long 0x00 "DERR_W0_5,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x454++0x03 line.long 0x00 "DERR_W1_5,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x458++0x03 line.long 0x00 "DERR_W2_5,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x45C++0x03 line.long 0x00 "DERR_W3_5,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x460++0x03 line.long 0x00 "DERR_W0_6,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x464++0x03 line.long 0x00 "DERR_W1_6,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x468++0x03 line.long 0x00 "DERR_W2_6,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x46C++0x03 line.long 0x00 "DERR_W3_6,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x470++0x03 line.long 0x00 "DERR_W0_7,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x474++0x03 line.long 0x00 "DERR_W1_7,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x478++0x03 line.long 0x00 "DERR_W2_7,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x47C++0x03 line.long 0x00 "DERR_W3_7,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x480++0x03 line.long 0x00 "DERR_W0_8,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x484++0x03 line.long 0x00 "DERR_W1_8,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x488++0x03 line.long 0x00 "DERR_W2_8,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x48C++0x03 line.long 0x00 "DERR_W3_8,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x490++0x03 line.long 0x00 "DERR_W0_9,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x494++0x03 line.long 0x00 "DERR_W1_9,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x498++0x03 line.long 0x00 "DERR_W2_9,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x49C++0x03 line.long 0x00 "DERR_W3_9,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x4A0++0x03 line.long 0x00 "DERR_W0_10,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x4A4++0x03 line.long 0x00 "DERR_W1_10,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x4A8++0x03 line.long 0x00 "DERR_W2_10,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x4AC++0x03 line.long 0x00 "DERR_W3_10,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x4B0++0x03 line.long 0x00 "DERR_W0_11,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x4B4++0x03 line.long 0x00 "DERR_W1_11,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x4B8++0x03 line.long 0x00 "DERR_W2_11,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x4BC++0x03 line.long 0x00 "DERR_W3_11,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x4C0++0x03 line.long 0x00 "DERR_W0_12,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x4C4++0x03 line.long 0x00 "DERR_W1_12,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x4C8++0x03 line.long 0x00 "DERR_W2_12,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x4CC++0x03 line.long 0x00 "DERR_W3_12,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x500++0x03 line.long 0x00 "DERR_W0_16,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x504++0x03 line.long 0x00 "DERR_W1_16,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x508++0x03 line.long 0x00 "DERR_W2_16,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x50C++0x03 line.long 0x00 "DERR_W3_16,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x510++0x03 line.long 0x00 "DERR_W0_17,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x514++0x03 line.long 0x00 "DERR_W1_17,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x518++0x03 line.long 0x00 "DERR_W2_17,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x51C++0x03 line.long 0x00 "DERR_W3_17,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x520++0x03 line.long 0x00 "DERR_W0_18,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x524++0x03 line.long 0x00 "DERR_W1_18,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x528++0x03 line.long 0x00 "DERR_W2_18,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x52C++0x03 line.long 0x00 "DERR_W3_18,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x540++0x03 line.long 0x00 "DERR_W0_20,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x544++0x03 line.long 0x00 "DERR_W1_20,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x548++0x03 line.long 0x00 "DERR_W2_20,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x54C++0x03 line.long 0x00 "DERR_W3_20,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x550++0x03 line.long 0x00 "DERR_W0_21,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x554++0x03 line.long 0x00 "DERR_W1_21,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x558++0x03 line.long 0x00 "DERR_W2_21,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x55C++0x03 line.long 0x00 "DERR_W3_21,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" rgroup.long 0x560++0x03 line.long 0x00 "DERR_W0_22,Domain Error Word0 Register" hexmask.long 0x00 0.--31. 1. "EADDR,Error address" rgroup.long 0x564++0x03 line.long 0x00 "DERR_W1_22,Domain Error Word1 Register" bitfld.long 0x00 30.--31. "EST,Error state" "0: No access violation has been detected,1: No access violation has been detected,2: A single access violation has been detected,3: Multiple access violations for this domain.." bitfld.long 0x00 24.--26. "EPORT,Error port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "ERW,Error read/" "0: Read access,1: Write access" bitfld.long 0x00 8.--10. "EATR,Error attributes" "0: Secure user mode instruction fetch access,1: Secure user mode data access,2: Secure privileged mode instruction fetch access,3: Secure privileged mode data access,4: Nonsecure user mode instruction fetch access,5: Nonsecure user mode data access,6: Nonsecure privileged mode instruction fetch..,7: Nonsecure privileged mode data access" newline bitfld.long 0x00 0.--3. "EDID,Error domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x568++0x03 line.long 0x00 "DERR_W2_22,Domain Error Word2 Register" hexmask.long 0x00 0.--31. 1. "Reserved,Reserved" group.long 0x56C++0x03 line.long 0x00 "DERR_W3_22,Domain Error Word3 Register" bitfld.long 0x00 30.--31. "RECR,Rearm Error Capture Registers" "0,1,2,3" group.long 0x700++0x03 line.long 0x00 "PID0,Process Identifier" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Register can be written by any secure..,1: Register can be written by any secure..,2: Register can only be written by a secure..,3: Register is locked (read-only) until the next.." bitfld.long 0x00 28. "TSM,Three-state model" "0,1" newline bitfld.long 0x00 27. "SP4SM,Special 4-state model" "0,1" bitfld.long 0x00 0.--5. "PID,Process identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x800++0x03 line.long 0x00 "MDA_W0_0_DFMT0,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 16.--21. "PID,Process Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--13. "PIDM,Process Identifier Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--7. "PE,Process identifier enable" "0: No process identifier is included in the..,1: No process identifier is included in the..,2: The process identifier is included in the..,3: The process identifier is included in the.." newline bitfld.long 0x00 4.--5. "DIDS,DID Select" "0: Use MDAm[3:0] as the domain identifier,1: Use the input DID as the domain identifier,2: Use MDAm[3:2] concatenated with the low-order..,?..." bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x804++0x03 line.long 0x00 "MDA_W1_0_DFMT0,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 16.--21. "PID,Process Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 8.--13. "PIDM,Process Identifier Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--7. "PE,Process identifier enable" "0: No process identifier is included in the..,1: No process identifier is included in the..,2: The process identifier is included in the..,3: The process identifier is included in the.." newline bitfld.long 0x00 4.--5. "DIDS,DID Select" "0: Use MDAm[3:0] as the domain identifier,1: Use the input DID as the domain identifier,2: Use MDAm[3:2] concatenated with the low-order..,?..." bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x820++0x03 line.long 0x00 "MDA_W0_1_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x840++0x03 line.long 0x00 "MDA_W0_2_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x860++0x03 line.long 0x00 "MDA_W0_3_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x880++0x03 line.long 0x00 "MDA_W0_4_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8A0++0x03 line.long 0x00 "MDA_W0_5_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8C0++0x03 line.long 0x00 "MDA_W0_6_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8E0++0x03 line.long 0x00 "MDA_W0_7_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x900++0x03 line.long 0x00 "MDA_W0_8_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x920++0x03 line.long 0x00 "MDA_W0_9_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x940++0x03 line.long 0x00 "MDA_W0_10_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x960++0x03 line.long 0x00 "MDA_W0_11_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x980++0x03 line.long 0x00 "MDA_W0_12_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x9A0++0x03 line.long 0x00 "MDA_W0_13_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x9C0++0x03 line.long 0x00 "MDA_W0_14_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x9E0++0x03 line.long 0x00 "MDA_W0_15_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA00++0x03 line.long 0x00 "MDA_W0_16_DFMT1,Master Domain Assignment" bitfld.long 0x00 31. "VLD,Valid" "0: The Wr domain assignment is invalid,1: The Wr domain assignment is valid" bitfld.long 0x00 30. "LK1,1-bit Lock" "0: Register can be written by any secure..,1: Register is locked (read-only) until the next.." newline rbitfld.long 0x00 29. "DFMT,Domain format" "0: Processor-core domain assignment,1: Non-processor domain assignment" bitfld.long 0x00 8. "DIDB,DID Bypass" "0: Use MDAn[3:0] as the domain identifier,1: Use the DID input as the domain identifier" newline bitfld.long 0x00 6.--7. "SA,Secure attribute" "0: Force the bus attribute for this master to..,1: Force the bus attribute for this master to..,2: Use the bus master's secure/nonsecure..,3: Use the bus master's secure/nonsecure.." bitfld.long 0x00 4.--5. "PA,Privileged attribute" "0: Force the bus attribute for this master to user,1: Force the bus attribute for this master to..,2: Use the bus master's privileged/user..,3: Use the bus master's privileged/user.." newline bitfld.long 0x00 0.--3. "DID,Domain identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1000++0x03 line.long 0x00 "PDAC_W0_0_0,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1004++0x03 line.long 0x00 "PDAC_W1_0_0,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1008++0x03 line.long 0x00 "PDAC_W0_0_1,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x100C++0x03 line.long 0x00 "PDAC_W1_0_1,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1010++0x03 line.long 0x00 "PDAC_W0_0_2,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1014++0x03 line.long 0x00 "PDAC_W1_0_2,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1018++0x03 line.long 0x00 "PDAC_W0_0_3,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x101C++0x03 line.long 0x00 "PDAC_W1_0_3,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1020++0x03 line.long 0x00 "PDAC_W0_0_4,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1024++0x03 line.long 0x00 "PDAC_W1_0_4,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1028++0x03 line.long 0x00 "PDAC_W0_0_5,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x102C++0x03 line.long 0x00 "PDAC_W1_0_5,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1030++0x03 line.long 0x00 "PDAC_W0_0_6,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1034++0x03 line.long 0x00 "PDAC_W1_0_6,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1038++0x03 line.long 0x00 "PDAC_W0_0_7,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x103C++0x03 line.long 0x00 "PDAC_W1_0_7,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1040++0x03 line.long 0x00 "PDAC_W0_0_8,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1044++0x03 line.long 0x00 "PDAC_W1_0_8,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1048++0x03 line.long 0x00 "PDAC_W0_0_9,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x104C++0x03 line.long 0x00 "PDAC_W1_0_9,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1050++0x03 line.long 0x00 "PDAC_W0_0_10,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1054++0x03 line.long 0x00 "PDAC_W1_0_10,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1058++0x03 line.long 0x00 "PDAC_W0_0_11,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x105C++0x03 line.long 0x00 "PDAC_W1_0_11,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1060++0x03 line.long 0x00 "PDAC_W0_0_12,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1064++0x03 line.long 0x00 "PDAC_W1_0_12,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1068++0x03 line.long 0x00 "PDAC_W0_0_13,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x106C++0x03 line.long 0x00 "PDAC_W1_0_13,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1070++0x03 line.long 0x00 "PDAC_W0_0_14,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1074++0x03 line.long 0x00 "PDAC_W1_0_14,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1078++0x03 line.long 0x00 "PDAC_W0_0_15,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x107C++0x03 line.long 0x00 "PDAC_W1_0_15,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1080++0x03 line.long 0x00 "PDAC_W0_0_16,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1084++0x03 line.long 0x00 "PDAC_W1_0_16,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1088++0x03 line.long 0x00 "PDAC_W0_0_17,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x108C++0x03 line.long 0x00 "PDAC_W1_0_17,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1090++0x03 line.long 0x00 "PDAC_W0_0_18,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1094++0x03 line.long 0x00 "PDAC_W1_0_18,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1098++0x03 line.long 0x00 "PDAC_W0_0_19,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x109C++0x03 line.long 0x00 "PDAC_W1_0_19,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10A0++0x03 line.long 0x00 "PDAC_W0_0_20,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10A4++0x03 line.long 0x00 "PDAC_W1_0_20,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10A8++0x03 line.long 0x00 "PDAC_W0_0_21,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10AC++0x03 line.long 0x00 "PDAC_W1_0_21,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10B0++0x03 line.long 0x00 "PDAC_W0_0_22,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10B4++0x03 line.long 0x00 "PDAC_W1_0_22,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10B8++0x03 line.long 0x00 "PDAC_W0_0_23,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10BC++0x03 line.long 0x00 "PDAC_W1_0_23,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10C0++0x03 line.long 0x00 "PDAC_W0_0_24,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10C4++0x03 line.long 0x00 "PDAC_W1_0_24,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10C8++0x03 line.long 0x00 "PDAC_W0_0_25,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10CC++0x03 line.long 0x00 "PDAC_W1_0_25,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10D0++0x03 line.long 0x00 "PDAC_W0_0_26,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10D4++0x03 line.long 0x00 "PDAC_W1_0_26,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10D8++0x03 line.long 0x00 "PDAC_W0_0_27,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10DC++0x03 line.long 0x00 "PDAC_W1_0_27,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10E0++0x03 line.long 0x00 "PDAC_W0_0_28,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10E4++0x03 line.long 0x00 "PDAC_W1_0_28,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10E8++0x03 line.long 0x00 "PDAC_W0_0_29,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10EC++0x03 line.long 0x00 "PDAC_W1_0_29,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10F0++0x03 line.long 0x00 "PDAC_W0_0_30,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10F4++0x03 line.long 0x00 "PDAC_W1_0_30,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x10F8++0x03 line.long 0x00 "PDAC_W0_0_31,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x10FC++0x03 line.long 0x00 "PDAC_W1_0_31,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1100++0x03 line.long 0x00 "PDAC_W0_0_32,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1104++0x03 line.long 0x00 "PDAC_W1_0_32,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1108++0x03 line.long 0x00 "PDAC_W0_0_33,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x110C++0x03 line.long 0x00 "PDAC_W1_0_33,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1110++0x03 line.long 0x00 "PDAC_W0_0_34,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1114++0x03 line.long 0x00 "PDAC_W1_0_34,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1118++0x03 line.long 0x00 "PDAC_W0_0_35,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x111C++0x03 line.long 0x00 "PDAC_W1_0_35,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1120++0x03 line.long 0x00 "PDAC_W0_0_36,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1124++0x03 line.long 0x00 "PDAC_W1_0_36,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1128++0x03 line.long 0x00 "PDAC_W0_0_37,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x112C++0x03 line.long 0x00 "PDAC_W1_0_37,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1130++0x03 line.long 0x00 "PDAC_W0_0_38,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1134++0x03 line.long 0x00 "PDAC_W1_0_38,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1138++0x03 line.long 0x00 "PDAC_W0_0_39,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x113C++0x03 line.long 0x00 "PDAC_W1_0_39,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1140++0x03 line.long 0x00 "PDAC_W0_0_40,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1144++0x03 line.long 0x00 "PDAC_W1_0_40,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1148++0x03 line.long 0x00 "PDAC_W0_0_41,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x114C++0x03 line.long 0x00 "PDAC_W1_0_41,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1150++0x03 line.long 0x00 "PDAC_W0_0_42,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1154++0x03 line.long 0x00 "PDAC_W1_0_42,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1158++0x03 line.long 0x00 "PDAC_W0_0_43,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x115C++0x03 line.long 0x00 "PDAC_W1_0_43,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1160++0x03 line.long 0x00 "PDAC_W0_0_44,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1164++0x03 line.long 0x00 "PDAC_W1_0_44,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1168++0x03 line.long 0x00 "PDAC_W0_0_45,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x116C++0x03 line.long 0x00 "PDAC_W1_0_45,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1170++0x03 line.long 0x00 "PDAC_W0_0_46,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1174++0x03 line.long 0x00 "PDAC_W1_0_46,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1178++0x03 line.long 0x00 "PDAC_W0_0_47,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x117C++0x03 line.long 0x00 "PDAC_W1_0_47,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1180++0x03 line.long 0x00 "PDAC_W0_0_48,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1184++0x03 line.long 0x00 "PDAC_W1_0_48,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1188++0x03 line.long 0x00 "PDAC_W0_0_49,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x118C++0x03 line.long 0x00 "PDAC_W1_0_49,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1190++0x03 line.long 0x00 "PDAC_W0_0_50,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1194++0x03 line.long 0x00 "PDAC_W1_0_50,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1198++0x03 line.long 0x00 "PDAC_W0_0_51,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x119C++0x03 line.long 0x00 "PDAC_W1_0_51,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11A0++0x03 line.long 0x00 "PDAC_W0_0_52,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11A4++0x03 line.long 0x00 "PDAC_W1_0_52,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11A8++0x03 line.long 0x00 "PDAC_W0_0_53,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11AC++0x03 line.long 0x00 "PDAC_W1_0_53,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11B0++0x03 line.long 0x00 "PDAC_W0_0_54,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11B4++0x03 line.long 0x00 "PDAC_W1_0_54,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11B8++0x03 line.long 0x00 "PDAC_W0_0_55,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11BC++0x03 line.long 0x00 "PDAC_W1_0_55,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11C0++0x03 line.long 0x00 "PDAC_W0_0_56,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11C4++0x03 line.long 0x00 "PDAC_W1_0_56,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11C8++0x03 line.long 0x00 "PDAC_W0_0_57,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11CC++0x03 line.long 0x00 "PDAC_W1_0_57,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11D0++0x03 line.long 0x00 "PDAC_W0_0_58,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11D4++0x03 line.long 0x00 "PDAC_W1_0_58,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11D8++0x03 line.long 0x00 "PDAC_W0_0_59,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11DC++0x03 line.long 0x00 "PDAC_W1_0_59,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x11E0++0x03 line.long 0x00 "PDAC_W0_0_60,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x11E4++0x03 line.long 0x00 "PDAC_W1_0_60,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1400++0x03 line.long 0x00 "PDAC_W0_1_0,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1404++0x03 line.long 0x00 "PDAC_W1_1_0,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1408++0x03 line.long 0x00 "PDAC_W0_1_1,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x140C++0x03 line.long 0x00 "PDAC_W1_1_1,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1410++0x03 line.long 0x00 "PDAC_W0_1_2,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1414++0x03 line.long 0x00 "PDAC_W1_1_2,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1418++0x03 line.long 0x00 "PDAC_W0_1_3,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x141C++0x03 line.long 0x00 "PDAC_W1_1_3,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1420++0x03 line.long 0x00 "PDAC_W0_1_4,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1424++0x03 line.long 0x00 "PDAC_W1_1_4,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1428++0x03 line.long 0x00 "PDAC_W0_1_5,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x142C++0x03 line.long 0x00 "PDAC_W1_1_5,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1430++0x03 line.long 0x00 "PDAC_W0_1_6,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1434++0x03 line.long 0x00 "PDAC_W1_1_6,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1438++0x03 line.long 0x00 "PDAC_W0_1_7,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x143C++0x03 line.long 0x00 "PDAC_W1_1_7,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1440++0x03 line.long 0x00 "PDAC_W0_1_8,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1444++0x03 line.long 0x00 "PDAC_W1_1_8,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1448++0x03 line.long 0x00 "PDAC_W0_1_9,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x144C++0x03 line.long 0x00 "PDAC_W1_1_9,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1450++0x03 line.long 0x00 "PDAC_W0_1_10,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1454++0x03 line.long 0x00 "PDAC_W1_1_10,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1458++0x03 line.long 0x00 "PDAC_W0_1_11,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x145C++0x03 line.long 0x00 "PDAC_W1_1_11,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1460++0x03 line.long 0x00 "PDAC_W0_1_12,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1464++0x03 line.long 0x00 "PDAC_W1_1_12,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1468++0x03 line.long 0x00 "PDAC_W0_1_13,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x146C++0x03 line.long 0x00 "PDAC_W1_1_13,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1470++0x03 line.long 0x00 "PDAC_W0_1_14,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1474++0x03 line.long 0x00 "PDAC_W1_1_14,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1478++0x03 line.long 0x00 "PDAC_W0_1_15,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x147C++0x03 line.long 0x00 "PDAC_W1_1_15,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1480++0x03 line.long 0x00 "PDAC_W0_1_16,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1484++0x03 line.long 0x00 "PDAC_W1_1_16,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1488++0x03 line.long 0x00 "PDAC_W0_1_17,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x148C++0x03 line.long 0x00 "PDAC_W1_1_17,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1490++0x03 line.long 0x00 "PDAC_W0_1_18,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1494++0x03 line.long 0x00 "PDAC_W1_1_18,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1498++0x03 line.long 0x00 "PDAC_W0_1_19,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x149C++0x03 line.long 0x00 "PDAC_W1_1_19,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x14A0++0x03 line.long 0x00 "PDAC_W0_1_20,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x14A4++0x03 line.long 0x00 "PDAC_W1_1_20,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x14A8++0x03 line.long 0x00 "PDAC_W0_1_21,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x14AC++0x03 line.long 0x00 "PDAC_W1_1_21,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x14B0++0x03 line.long 0x00 "PDAC_W0_1_22,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x14B4++0x03 line.long 0x00 "PDAC_W1_1_22,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1800++0x03 line.long 0x00 "PDAC_W0_2_0,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1804++0x03 line.long 0x00 "PDAC_W1_2_0,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1808++0x03 line.long 0x00 "PDAC_W0_2_1,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x180C++0x03 line.long 0x00 "PDAC_W1_2_1,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1810++0x03 line.long 0x00 "PDAC_W0_2_2,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1814++0x03 line.long 0x00 "PDAC_W1_2_2,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1818++0x03 line.long 0x00 "PDAC_W0_2_3,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x181C++0x03 line.long 0x00 "PDAC_W1_2_3,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1820++0x03 line.long 0x00 "PDAC_W0_2_4,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1824++0x03 line.long 0x00 "PDAC_W1_2_4,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1828++0x03 line.long 0x00 "PDAC_W0_2_5,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x182C++0x03 line.long 0x00 "PDAC_W1_2_5,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1830++0x03 line.long 0x00 "PDAC_W0_2_6,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1834++0x03 line.long 0x00 "PDAC_W1_2_6,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1838++0x03 line.long 0x00 "PDAC_W0_2_7,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x183C++0x03 line.long 0x00 "PDAC_W1_2_7,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1840++0x03 line.long 0x00 "PDAC_W0_2_8,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1844++0x03 line.long 0x00 "PDAC_W1_2_8,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1848++0x03 line.long 0x00 "PDAC_W0_2_9,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x184C++0x03 line.long 0x00 "PDAC_W1_2_9,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1850++0x03 line.long 0x00 "PDAC_W0_2_10,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1854++0x03 line.long 0x00 "PDAC_W1_2_10,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1858++0x03 line.long 0x00 "PDAC_W0_2_11,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x185C++0x03 line.long 0x00 "PDAC_W1_2_11,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1860++0x03 line.long 0x00 "PDAC_W0_2_12,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1864++0x03 line.long 0x00 "PDAC_W1_2_12,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1868++0x03 line.long 0x00 "PDAC_W0_2_13,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x186C++0x03 line.long 0x00 "PDAC_W1_2_13,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1870++0x03 line.long 0x00 "PDAC_W0_2_14,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1874++0x03 line.long 0x00 "PDAC_W1_2_14,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1878++0x03 line.long 0x00 "PDAC_W0_2_15,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x187C++0x03 line.long 0x00 "PDAC_W1_2_15,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1880++0x03 line.long 0x00 "PDAC_W0_2_16,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1884++0x03 line.long 0x00 "PDAC_W1_2_16,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1888++0x03 line.long 0x00 "PDAC_W0_2_17,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x188C++0x03 line.long 0x00 "PDAC_W1_2_17,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1890++0x03 line.long 0x00 "PDAC_W0_2_18,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1894++0x03 line.long 0x00 "PDAC_W1_2_18,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1898++0x03 line.long 0x00 "PDAC_W0_2_19,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x189C++0x03 line.long 0x00 "PDAC_W1_2_19,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18A0++0x03 line.long 0x00 "PDAC_W0_2_20,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18A4++0x03 line.long 0x00 "PDAC_W1_2_20,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18A8++0x03 line.long 0x00 "PDAC_W0_2_21,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18AC++0x03 line.long 0x00 "PDAC_W1_2_21,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18B0++0x03 line.long 0x00 "PDAC_W0_2_22,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18B4++0x03 line.long 0x00 "PDAC_W1_2_22,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18B8++0x03 line.long 0x00 "PDAC_W0_2_23,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18BC++0x03 line.long 0x00 "PDAC_W1_2_23,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18C0++0x03 line.long 0x00 "PDAC_W0_2_24,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18C4++0x03 line.long 0x00 "PDAC_W1_2_24,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18C8++0x03 line.long 0x00 "PDAC_W0_2_25,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18CC++0x03 line.long 0x00 "PDAC_W1_2_25,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18D0++0x03 line.long 0x00 "PDAC_W0_2_26,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18D4++0x03 line.long 0x00 "PDAC_W1_2_26,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18D8++0x03 line.long 0x00 "PDAC_W0_2_27,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18DC++0x03 line.long 0x00 "PDAC_W1_2_27,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18E0++0x03 line.long 0x00 "PDAC_W0_2_28,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18E4++0x03 line.long 0x00 "PDAC_W1_2_28,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18E8++0x03 line.long 0x00 "PDAC_W0_2_29,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18EC++0x03 line.long 0x00 "PDAC_W1_2_29,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18F0++0x03 line.long 0x00 "PDAC_W0_2_30,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18F4++0x03 line.long 0x00 "PDAC_W1_2_30,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x18F8++0x03 line.long 0x00 "PDAC_W0_2_31,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x18FC++0x03 line.long 0x00 "PDAC_W1_2_31,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1900++0x03 line.long 0x00 "PDAC_W0_2_32,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1904++0x03 line.long 0x00 "PDAC_W1_2_32,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1908++0x03 line.long 0x00 "PDAC_W0_2_33,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x190C++0x03 line.long 0x00 "PDAC_W1_2_33,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1910++0x03 line.long 0x00 "PDAC_W0_2_34,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1914++0x03 line.long 0x00 "PDAC_W1_2_34,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1918++0x03 line.long 0x00 "PDAC_W0_2_35,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x191C++0x03 line.long 0x00 "PDAC_W1_2_35,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1920++0x03 line.long 0x00 "PDAC_W0_2_36,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1924++0x03 line.long 0x00 "PDAC_W1_2_36,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1928++0x03 line.long 0x00 "PDAC_W0_2_37,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x192C++0x03 line.long 0x00 "PDAC_W1_2_37,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1930++0x03 line.long 0x00 "PDAC_W0_2_38,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1934++0x03 line.long 0x00 "PDAC_W1_2_38,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1938++0x03 line.long 0x00 "PDAC_W0_2_39,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x193C++0x03 line.long 0x00 "PDAC_W1_2_39,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1940++0x03 line.long 0x00 "PDAC_W0_2_40,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1944++0x03 line.long 0x00 "PDAC_W1_2_40,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1948++0x03 line.long 0x00 "PDAC_W0_2_41,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x194C++0x03 line.long 0x00 "PDAC_W1_2_41,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1950++0x03 line.long 0x00 "PDAC_W0_2_42,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1954++0x03 line.long 0x00 "PDAC_W1_2_42,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1958++0x03 line.long 0x00 "PDAC_W0_2_43,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x195C++0x03 line.long 0x00 "PDAC_W1_2_43,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1960++0x03 line.long 0x00 "PDAC_W0_2_44,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1964++0x03 line.long 0x00 "PDAC_W1_2_44,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1968++0x03 line.long 0x00 "PDAC_W0_2_45,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x196C++0x03 line.long 0x00 "PDAC_W1_2_45,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1970++0x03 line.long 0x00 "PDAC_W0_2_46,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1974++0x03 line.long 0x00 "PDAC_W1_2_46,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1978++0x03 line.long 0x00 "PDAC_W0_2_47,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x197C++0x03 line.long 0x00 "PDAC_W1_2_47,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1980++0x03 line.long 0x00 "PDAC_W0_2_48,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1984++0x03 line.long 0x00 "PDAC_W1_2_48,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1990++0x03 line.long 0x00 "PDAC_W0_2_50,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x1994++0x03 line.long 0x00 "PDAC_W1_2_50,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x1998++0x03 line.long 0x00 "PDAC_W0_2_51,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x199C++0x03 line.long 0x00 "PDAC_W1_2_51,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x19A0++0x03 line.long 0x00 "PDAC_W0_2_52,Peripheral Domain Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x19A4++0x03 line.long 0x00 "PDAC_W1_2_52,Peripheral Domain Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The PDACs assignment is invalid,1: The PDACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire PDACs can be written,1: Entire PDACs can be written,2: Domain x can only update the DxACP field and..,3: PDACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2000++0x03 line.long 0x00 "MRGD_W0_0_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2004++0x03 line.long 0x00 "MRGD_W1_0_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2008++0x03 line.long 0x00 "MRGD_W2_0_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x200C++0x03 line.long 0x00 "MRGD_W3_0_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2010++0x03 line.long 0x00 "MRGD_W4_0_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2020++0x03 line.long 0x00 "MRGD_W0_0_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2024++0x03 line.long 0x00 "MRGD_W1_0_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2028++0x03 line.long 0x00 "MRGD_W2_0_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x202C++0x03 line.long 0x00 "MRGD_W3_0_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2030++0x03 line.long 0x00 "MRGD_W4_0_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2040++0x03 line.long 0x00 "MRGD_W0_0_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2044++0x03 line.long 0x00 "MRGD_W1_0_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2048++0x03 line.long 0x00 "MRGD_W2_0_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x204C++0x03 line.long 0x00 "MRGD_W3_0_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2050++0x03 line.long 0x00 "MRGD_W4_0_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2060++0x03 line.long 0x00 "MRGD_W0_0_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2064++0x03 line.long 0x00 "MRGD_W1_0_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2068++0x03 line.long 0x00 "MRGD_W2_0_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x206C++0x03 line.long 0x00 "MRGD_W3_0_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2070++0x03 line.long 0x00 "MRGD_W4_0_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2200++0x03 line.long 0x00 "MRGD_W0_1_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2204++0x03 line.long 0x00 "MRGD_W1_1_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2208++0x03 line.long 0x00 "MRGD_W2_1_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x220C++0x03 line.long 0x00 "MRGD_W3_1_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2210++0x03 line.long 0x00 "MRGD_W4_1_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2220++0x03 line.long 0x00 "MRGD_W0_1_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2224++0x03 line.long 0x00 "MRGD_W1_1_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2228++0x03 line.long 0x00 "MRGD_W2_1_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x222C++0x03 line.long 0x00 "MRGD_W3_1_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2230++0x03 line.long 0x00 "MRGD_W4_1_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2240++0x03 line.long 0x00 "MRGD_W0_1_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2244++0x03 line.long 0x00 "MRGD_W1_1_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2248++0x03 line.long 0x00 "MRGD_W2_1_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x224C++0x03 line.long 0x00 "MRGD_W3_1_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2250++0x03 line.long 0x00 "MRGD_W4_1_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2260++0x03 line.long 0x00 "MRGD_W0_1_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2264++0x03 line.long 0x00 "MRGD_W1_1_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2268++0x03 line.long 0x00 "MRGD_W2_1_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x226C++0x03 line.long 0x00 "MRGD_W3_1_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2270++0x03 line.long 0x00 "MRGD_W4_1_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2280++0x03 line.long 0x00 "MRGD_W0_1_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2284++0x03 line.long 0x00 "MRGD_W1_1_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2288++0x03 line.long 0x00 "MRGD_W2_1_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x228C++0x03 line.long 0x00 "MRGD_W3_1_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2290++0x03 line.long 0x00 "MRGD_W4_1_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x22A0++0x03 line.long 0x00 "MRGD_W0_1_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x22A4++0x03 line.long 0x00 "MRGD_W1_1_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x22A8++0x03 line.long 0x00 "MRGD_W2_1_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x22AC++0x03 line.long 0x00 "MRGD_W3_1_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x22B0++0x03 line.long 0x00 "MRGD_W4_1_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x22C0++0x03 line.long 0x00 "MRGD_W0_1_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x22C4++0x03 line.long 0x00 "MRGD_W1_1_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x22C8++0x03 line.long 0x00 "MRGD_W2_1_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x22CC++0x03 line.long 0x00 "MRGD_W3_1_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x22D0++0x03 line.long 0x00 "MRGD_W4_1_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x22E0++0x03 line.long 0x00 "MRGD_W0_1_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x22E4++0x03 line.long 0x00 "MRGD_W1_1_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x22E8++0x03 line.long 0x00 "MRGD_W2_1_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x22EC++0x03 line.long 0x00 "MRGD_W3_1_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x22F0++0x03 line.long 0x00 "MRGD_W4_1_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2400++0x03 line.long 0x00 "MRGD_W0_2_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2404++0x03 line.long 0x00 "MRGD_W1_2_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2408++0x03 line.long 0x00 "MRGD_W2_2_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x240C++0x03 line.long 0x00 "MRGD_W3_2_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2410++0x03 line.long 0x00 "MRGD_W4_2_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2420++0x03 line.long 0x00 "MRGD_W0_2_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2424++0x03 line.long 0x00 "MRGD_W1_2_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2428++0x03 line.long 0x00 "MRGD_W2_2_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x242C++0x03 line.long 0x00 "MRGD_W3_2_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2430++0x03 line.long 0x00 "MRGD_W4_2_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2440++0x03 line.long 0x00 "MRGD_W0_2_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2444++0x03 line.long 0x00 "MRGD_W1_2_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2448++0x03 line.long 0x00 "MRGD_W2_2_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x244C++0x03 line.long 0x00 "MRGD_W3_2_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2450++0x03 line.long 0x00 "MRGD_W4_2_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2460++0x03 line.long 0x00 "MRGD_W0_2_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2464++0x03 line.long 0x00 "MRGD_W1_2_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2468++0x03 line.long 0x00 "MRGD_W2_2_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x246C++0x03 line.long 0x00 "MRGD_W3_2_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2470++0x03 line.long 0x00 "MRGD_W4_2_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2600++0x03 line.long 0x00 "MRGD_W0_3_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2604++0x03 line.long 0x00 "MRGD_W1_3_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2608++0x03 line.long 0x00 "MRGD_W2_3_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x260C++0x03 line.long 0x00 "MRGD_W3_3_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2610++0x03 line.long 0x00 "MRGD_W4_3_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2620++0x03 line.long 0x00 "MRGD_W0_3_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2624++0x03 line.long 0x00 "MRGD_W1_3_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2628++0x03 line.long 0x00 "MRGD_W2_3_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x262C++0x03 line.long 0x00 "MRGD_W3_3_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2630++0x03 line.long 0x00 "MRGD_W4_3_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2640++0x03 line.long 0x00 "MRGD_W0_3_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2644++0x03 line.long 0x00 "MRGD_W1_3_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2648++0x03 line.long 0x00 "MRGD_W2_3_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x264C++0x03 line.long 0x00 "MRGD_W3_3_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2650++0x03 line.long 0x00 "MRGD_W4_3_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2660++0x03 line.long 0x00 "MRGD_W0_3_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2664++0x03 line.long 0x00 "MRGD_W1_3_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2668++0x03 line.long 0x00 "MRGD_W2_3_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x266C++0x03 line.long 0x00 "MRGD_W3_3_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2670++0x03 line.long 0x00 "MRGD_W4_3_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2800++0x03 line.long 0x00 "MRGD_W0_4_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2804++0x03 line.long 0x00 "MRGD_W1_4_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2808++0x03 line.long 0x00 "MRGD_W2_4_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x280C++0x03 line.long 0x00 "MRGD_W3_4_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2810++0x03 line.long 0x00 "MRGD_W4_4_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2820++0x03 line.long 0x00 "MRGD_W0_4_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2824++0x03 line.long 0x00 "MRGD_W1_4_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2828++0x03 line.long 0x00 "MRGD_W2_4_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x282C++0x03 line.long 0x00 "MRGD_W3_4_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2830++0x03 line.long 0x00 "MRGD_W4_4_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2840++0x03 line.long 0x00 "MRGD_W0_4_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2844++0x03 line.long 0x00 "MRGD_W1_4_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2848++0x03 line.long 0x00 "MRGD_W2_4_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x284C++0x03 line.long 0x00 "MRGD_W3_4_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2850++0x03 line.long 0x00 "MRGD_W4_4_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2860++0x03 line.long 0x00 "MRGD_W0_4_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2864++0x03 line.long 0x00 "MRGD_W1_4_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2868++0x03 line.long 0x00 "MRGD_W2_4_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x286C++0x03 line.long 0x00 "MRGD_W3_4_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2870++0x03 line.long 0x00 "MRGD_W4_4_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2880++0x03 line.long 0x00 "MRGD_W0_4_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2884++0x03 line.long 0x00 "MRGD_W1_4_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2888++0x03 line.long 0x00 "MRGD_W2_4_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x288C++0x03 line.long 0x00 "MRGD_W3_4_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2890++0x03 line.long 0x00 "MRGD_W4_4_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x28A0++0x03 line.long 0x00 "MRGD_W0_4_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x28A4++0x03 line.long 0x00 "MRGD_W1_4_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x28A8++0x03 line.long 0x00 "MRGD_W2_4_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x28AC++0x03 line.long 0x00 "MRGD_W3_4_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x28B0++0x03 line.long 0x00 "MRGD_W4_4_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x28C0++0x03 line.long 0x00 "MRGD_W0_4_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x28C4++0x03 line.long 0x00 "MRGD_W1_4_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x28C8++0x03 line.long 0x00 "MRGD_W2_4_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x28CC++0x03 line.long 0x00 "MRGD_W3_4_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x28D0++0x03 line.long 0x00 "MRGD_W4_4_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x28E0++0x03 line.long 0x00 "MRGD_W0_4_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x28E4++0x03 line.long 0x00 "MRGD_W1_4_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x28E8++0x03 line.long 0x00 "MRGD_W2_4_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x28EC++0x03 line.long 0x00 "MRGD_W3_4_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x28F0++0x03 line.long 0x00 "MRGD_W4_4_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2A00++0x03 line.long 0x00 "MRGD_W0_5_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2A04++0x03 line.long 0x00 "MRGD_W1_5_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2A08++0x03 line.long 0x00 "MRGD_W2_5_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2A0C++0x03 line.long 0x00 "MRGD_W3_5_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2A10++0x03 line.long 0x00 "MRGD_W4_5_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2A20++0x03 line.long 0x00 "MRGD_W0_5_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2A24++0x03 line.long 0x00 "MRGD_W1_5_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2A28++0x03 line.long 0x00 "MRGD_W2_5_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2A2C++0x03 line.long 0x00 "MRGD_W3_5_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2A30++0x03 line.long 0x00 "MRGD_W4_5_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2A40++0x03 line.long 0x00 "MRGD_W0_5_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2A44++0x03 line.long 0x00 "MRGD_W1_5_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2A48++0x03 line.long 0x00 "MRGD_W2_5_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2A4C++0x03 line.long 0x00 "MRGD_W3_5_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2A50++0x03 line.long 0x00 "MRGD_W4_5_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2A60++0x03 line.long 0x00 "MRGD_W0_5_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2A64++0x03 line.long 0x00 "MRGD_W1_5_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2A68++0x03 line.long 0x00 "MRGD_W2_5_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2A6C++0x03 line.long 0x00 "MRGD_W3_5_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2A70++0x03 line.long 0x00 "MRGD_W4_5_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2A80++0x03 line.long 0x00 "MRGD_W0_5_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2A84++0x03 line.long 0x00 "MRGD_W1_5_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2A88++0x03 line.long 0x00 "MRGD_W2_5_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2A8C++0x03 line.long 0x00 "MRGD_W3_5_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2A90++0x03 line.long 0x00 "MRGD_W4_5_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2AA0++0x03 line.long 0x00 "MRGD_W0_5_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2AA4++0x03 line.long 0x00 "MRGD_W1_5_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2AA8++0x03 line.long 0x00 "MRGD_W2_5_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2AAC++0x03 line.long 0x00 "MRGD_W3_5_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2AB0++0x03 line.long 0x00 "MRGD_W4_5_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2AC0++0x03 line.long 0x00 "MRGD_W0_5_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2AC4++0x03 line.long 0x00 "MRGD_W1_5_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2AC8++0x03 line.long 0x00 "MRGD_W2_5_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2ACC++0x03 line.long 0x00 "MRGD_W3_5_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2AD0++0x03 line.long 0x00 "MRGD_W4_5_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2AE0++0x03 line.long 0x00 "MRGD_W0_5_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2AE4++0x03 line.long 0x00 "MRGD_W1_5_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2AE8++0x03 line.long 0x00 "MRGD_W2_5_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2AEC++0x03 line.long 0x00 "MRGD_W3_5_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2AF0++0x03 line.long 0x00 "MRGD_W4_5_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2C00++0x03 line.long 0x00 "MRGD_W0_6_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2C04++0x03 line.long 0x00 "MRGD_W1_6_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2C08++0x03 line.long 0x00 "MRGD_W2_6_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2C0C++0x03 line.long 0x00 "MRGD_W3_6_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2C10++0x03 line.long 0x00 "MRGD_W4_6_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2C20++0x03 line.long 0x00 "MRGD_W0_6_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2C24++0x03 line.long 0x00 "MRGD_W1_6_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2C28++0x03 line.long 0x00 "MRGD_W2_6_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2C2C++0x03 line.long 0x00 "MRGD_W3_6_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2C30++0x03 line.long 0x00 "MRGD_W4_6_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2C40++0x03 line.long 0x00 "MRGD_W0_6_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2C44++0x03 line.long 0x00 "MRGD_W1_6_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2C48++0x03 line.long 0x00 "MRGD_W2_6_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2C4C++0x03 line.long 0x00 "MRGD_W3_6_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2C50++0x03 line.long 0x00 "MRGD_W4_6_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2C60++0x03 line.long 0x00 "MRGD_W0_6_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2C64++0x03 line.long 0x00 "MRGD_W1_6_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2C68++0x03 line.long 0x00 "MRGD_W2_6_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2C6C++0x03 line.long 0x00 "MRGD_W3_6_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2C70++0x03 line.long 0x00 "MRGD_W4_6_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2C80++0x03 line.long 0x00 "MRGD_W0_6_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2C84++0x03 line.long 0x00 "MRGD_W1_6_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2C88++0x03 line.long 0x00 "MRGD_W2_6_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2C8C++0x03 line.long 0x00 "MRGD_W3_6_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2C90++0x03 line.long 0x00 "MRGD_W4_6_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2CA0++0x03 line.long 0x00 "MRGD_W0_6_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2CA4++0x03 line.long 0x00 "MRGD_W1_6_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2CA8++0x03 line.long 0x00 "MRGD_W2_6_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2CAC++0x03 line.long 0x00 "MRGD_W3_6_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2CB0++0x03 line.long 0x00 "MRGD_W4_6_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2CC0++0x03 line.long 0x00 "MRGD_W0_6_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2CC4++0x03 line.long 0x00 "MRGD_W1_6_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2CC8++0x03 line.long 0x00 "MRGD_W2_6_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2CCC++0x03 line.long 0x00 "MRGD_W3_6_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2CD0++0x03 line.long 0x00 "MRGD_W4_6_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2CE0++0x03 line.long 0x00 "MRGD_W0_6_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2CE4++0x03 line.long 0x00 "MRGD_W1_6_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2CE8++0x03 line.long 0x00 "MRGD_W2_6_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2CEC++0x03 line.long 0x00 "MRGD_W3_6_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2CF0++0x03 line.long 0x00 "MRGD_W4_6_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2E00++0x03 line.long 0x00 "MRGD_W0_7_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2E04++0x03 line.long 0x00 "MRGD_W1_7_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2E08++0x03 line.long 0x00 "MRGD_W2_7_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2E0C++0x03 line.long 0x00 "MRGD_W3_7_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2E10++0x03 line.long 0x00 "MRGD_W4_7_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2E20++0x03 line.long 0x00 "MRGD_W0_7_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2E24++0x03 line.long 0x00 "MRGD_W1_7_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2E28++0x03 line.long 0x00 "MRGD_W2_7_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2E2C++0x03 line.long 0x00 "MRGD_W3_7_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2E30++0x03 line.long 0x00 "MRGD_W4_7_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2E40++0x03 line.long 0x00 "MRGD_W0_7_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2E44++0x03 line.long 0x00 "MRGD_W1_7_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2E48++0x03 line.long 0x00 "MRGD_W2_7_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2E4C++0x03 line.long 0x00 "MRGD_W3_7_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2E50++0x03 line.long 0x00 "MRGD_W4_7_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2E60++0x03 line.long 0x00 "MRGD_W0_7_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2E64++0x03 line.long 0x00 "MRGD_W1_7_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2E68++0x03 line.long 0x00 "MRGD_W2_7_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2E6C++0x03 line.long 0x00 "MRGD_W3_7_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2E70++0x03 line.long 0x00 "MRGD_W4_7_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2E80++0x03 line.long 0x00 "MRGD_W0_7_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2E84++0x03 line.long 0x00 "MRGD_W1_7_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2E88++0x03 line.long 0x00 "MRGD_W2_7_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2E8C++0x03 line.long 0x00 "MRGD_W3_7_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2E90++0x03 line.long 0x00 "MRGD_W4_7_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2EA0++0x03 line.long 0x00 "MRGD_W0_7_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2EA4++0x03 line.long 0x00 "MRGD_W1_7_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2EA8++0x03 line.long 0x00 "MRGD_W2_7_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2EAC++0x03 line.long 0x00 "MRGD_W3_7_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2EB0++0x03 line.long 0x00 "MRGD_W4_7_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2EC0++0x03 line.long 0x00 "MRGD_W0_7_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2EC4++0x03 line.long 0x00 "MRGD_W1_7_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2EC8++0x03 line.long 0x00 "MRGD_W2_7_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2ECC++0x03 line.long 0x00 "MRGD_W3_7_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2ED0++0x03 line.long 0x00 "MRGD_W4_7_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x2EE0++0x03 line.long 0x00 "MRGD_W0_7_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x2EE4++0x03 line.long 0x00 "MRGD_W1_7_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x2EE8++0x03 line.long 0x00 "MRGD_W2_7_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x2EEC++0x03 line.long 0x00 "MRGD_W3_7_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x2EF0++0x03 line.long 0x00 "MRGD_W4_7_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3000++0x03 line.long 0x00 "MRGD_W0_8_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3004++0x03 line.long 0x00 "MRGD_W1_8_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3008++0x03 line.long 0x00 "MRGD_W2_8_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x300C++0x03 line.long 0x00 "MRGD_W3_8_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3010++0x03 line.long 0x00 "MRGD_W4_8_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3020++0x03 line.long 0x00 "MRGD_W0_8_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3024++0x03 line.long 0x00 "MRGD_W1_8_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3028++0x03 line.long 0x00 "MRGD_W2_8_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x302C++0x03 line.long 0x00 "MRGD_W3_8_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3030++0x03 line.long 0x00 "MRGD_W4_8_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3040++0x03 line.long 0x00 "MRGD_W0_8_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3044++0x03 line.long 0x00 "MRGD_W1_8_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3048++0x03 line.long 0x00 "MRGD_W2_8_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x304C++0x03 line.long 0x00 "MRGD_W3_8_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3050++0x03 line.long 0x00 "MRGD_W4_8_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3060++0x03 line.long 0x00 "MRGD_W0_8_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3064++0x03 line.long 0x00 "MRGD_W1_8_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3068++0x03 line.long 0x00 "MRGD_W2_8_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x306C++0x03 line.long 0x00 "MRGD_W3_8_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3070++0x03 line.long 0x00 "MRGD_W4_8_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3200++0x03 line.long 0x00 "MRGD_W0_9_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3204++0x03 line.long 0x00 "MRGD_W1_9_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3208++0x03 line.long 0x00 "MRGD_W2_9_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x320C++0x03 line.long 0x00 "MRGD_W3_9_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3210++0x03 line.long 0x00 "MRGD_W4_9_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3220++0x03 line.long 0x00 "MRGD_W0_9_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3224++0x03 line.long 0x00 "MRGD_W1_9_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3228++0x03 line.long 0x00 "MRGD_W2_9_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x322C++0x03 line.long 0x00 "MRGD_W3_9_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3230++0x03 line.long 0x00 "MRGD_W4_9_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3240++0x03 line.long 0x00 "MRGD_W0_9_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3244++0x03 line.long 0x00 "MRGD_W1_9_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3248++0x03 line.long 0x00 "MRGD_W2_9_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x324C++0x03 line.long 0x00 "MRGD_W3_9_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3250++0x03 line.long 0x00 "MRGD_W4_9_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3260++0x03 line.long 0x00 "MRGD_W0_9_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3264++0x03 line.long 0x00 "MRGD_W1_9_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3268++0x03 line.long 0x00 "MRGD_W2_9_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x326C++0x03 line.long 0x00 "MRGD_W3_9_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3270++0x03 line.long 0x00 "MRGD_W4_9_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3280++0x03 line.long 0x00 "MRGD_W0_9_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3284++0x03 line.long 0x00 "MRGD_W1_9_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3288++0x03 line.long 0x00 "MRGD_W2_9_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x328C++0x03 line.long 0x00 "MRGD_W3_9_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3290++0x03 line.long 0x00 "MRGD_W4_9_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x32A0++0x03 line.long 0x00 "MRGD_W0_9_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x32A4++0x03 line.long 0x00 "MRGD_W1_9_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x32A8++0x03 line.long 0x00 "MRGD_W2_9_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x32AC++0x03 line.long 0x00 "MRGD_W3_9_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x32B0++0x03 line.long 0x00 "MRGD_W4_9_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x32C0++0x03 line.long 0x00 "MRGD_W0_9_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x32C4++0x03 line.long 0x00 "MRGD_W1_9_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x32C8++0x03 line.long 0x00 "MRGD_W2_9_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x32CC++0x03 line.long 0x00 "MRGD_W3_9_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x32D0++0x03 line.long 0x00 "MRGD_W4_9_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x32E0++0x03 line.long 0x00 "MRGD_W0_9_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x32E4++0x03 line.long 0x00 "MRGD_W1_9_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x32E8++0x03 line.long 0x00 "MRGD_W2_9_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x32EC++0x03 line.long 0x00 "MRGD_W3_9_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x32F0++0x03 line.long 0x00 "MRGD_W4_9_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3400++0x03 line.long 0x00 "MRGD_W0_10_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3404++0x03 line.long 0x00 "MRGD_W1_10_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3408++0x03 line.long 0x00 "MRGD_W2_10_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x340C++0x03 line.long 0x00 "MRGD_W3_10_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3410++0x03 line.long 0x00 "MRGD_W4_10_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3420++0x03 line.long 0x00 "MRGD_W0_10_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3424++0x03 line.long 0x00 "MRGD_W1_10_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3428++0x03 line.long 0x00 "MRGD_W2_10_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x342C++0x03 line.long 0x00 "MRGD_W3_10_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3430++0x03 line.long 0x00 "MRGD_W4_10_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3440++0x03 line.long 0x00 "MRGD_W0_10_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3444++0x03 line.long 0x00 "MRGD_W1_10_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3448++0x03 line.long 0x00 "MRGD_W2_10_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x344C++0x03 line.long 0x00 "MRGD_W3_10_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3450++0x03 line.long 0x00 "MRGD_W4_10_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3460++0x03 line.long 0x00 "MRGD_W0_10_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3464++0x03 line.long 0x00 "MRGD_W1_10_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3468++0x03 line.long 0x00 "MRGD_W2_10_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x346C++0x03 line.long 0x00 "MRGD_W3_10_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3470++0x03 line.long 0x00 "MRGD_W4_10_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3480++0x03 line.long 0x00 "MRGD_W0_10_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3484++0x03 line.long 0x00 "MRGD_W1_10_4,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3488++0x03 line.long 0x00 "MRGD_W2_10_4,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x348C++0x03 line.long 0x00 "MRGD_W3_10_4,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3490++0x03 line.long 0x00 "MRGD_W4_10_4,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x34A0++0x03 line.long 0x00 "MRGD_W0_10_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x34A4++0x03 line.long 0x00 "MRGD_W1_10_5,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x34A8++0x03 line.long 0x00 "MRGD_W2_10_5,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x34AC++0x03 line.long 0x00 "MRGD_W3_10_5,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x34B0++0x03 line.long 0x00 "MRGD_W4_10_5,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x34C0++0x03 line.long 0x00 "MRGD_W0_10_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x34C4++0x03 line.long 0x00 "MRGD_W1_10_6,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x34C8++0x03 line.long 0x00 "MRGD_W2_10_6,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x34CC++0x03 line.long 0x00 "MRGD_W3_10_6,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x34D0++0x03 line.long 0x00 "MRGD_W4_10_6,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x34E0++0x03 line.long 0x00 "MRGD_W0_10_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x34E4++0x03 line.long 0x00 "MRGD_W1_10_7,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x34E8++0x03 line.long 0x00 "MRGD_W2_10_7,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x34EC++0x03 line.long 0x00 "MRGD_W3_10_7,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x34F0++0x03 line.long 0x00 "MRGD_W4_10_7,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3600++0x03 line.long 0x00 "MRGD_W0_11_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3604++0x03 line.long 0x00 "MRGD_W1_11_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3608++0x03 line.long 0x00 "MRGD_W2_11_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x360C++0x03 line.long 0x00 "MRGD_W3_11_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3610++0x03 line.long 0x00 "MRGD_W4_11_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3620++0x03 line.long 0x00 "MRGD_W0_11_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3624++0x03 line.long 0x00 "MRGD_W1_11_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3628++0x03 line.long 0x00 "MRGD_W2_11_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x362C++0x03 line.long 0x00 "MRGD_W3_11_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3630++0x03 line.long 0x00 "MRGD_W4_11_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3640++0x03 line.long 0x00 "MRGD_W0_11_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3644++0x03 line.long 0x00 "MRGD_W1_11_2,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3648++0x03 line.long 0x00 "MRGD_W2_11_2,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x364C++0x03 line.long 0x00 "MRGD_W3_11_2,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3650++0x03 line.long 0x00 "MRGD_W4_11_2,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3660++0x03 line.long 0x00 "MRGD_W0_11_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3664++0x03 line.long 0x00 "MRGD_W1_11_3,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3668++0x03 line.long 0x00 "MRGD_W2_11_3,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x366C++0x03 line.long 0x00 "MRGD_W3_11_3,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3670++0x03 line.long 0x00 "MRGD_W4_11_3,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3800++0x03 line.long 0x00 "MRGD_W0_12_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3804++0x03 line.long 0x00 "MRGD_W1_12_0,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3808++0x03 line.long 0x00 "MRGD_W2_12_0,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x380C++0x03 line.long 0x00 "MRGD_W3_12_0,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3810++0x03 line.long 0x00 "MRGD_W4_12_0,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x3820++0x03 line.long 0x00 "MRGD_W0_12_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "SRTADDR,Start Address" group.long 0x3824++0x03 line.long 0x00 "MRGD_W1_12_1,Memory Region Descriptor" hexmask.long 0x00 5.--31. 1. "ENDADDR,End Address" group.long 0x3828++0x03 line.long 0x00 "MRGD_W2_12_1,Memory Region Descriptor" rbitfld.long 0x00 24.--27. "EALO,Exclusive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7SEL,Domain 7 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6SEL,Domain 6 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5SEL,Domain 5 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4SEL,Domain 4 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3SEL,Domain 3 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2SEL,Domain 2 select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1SEL,Domain 1 select" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0SEL,Domain 0 select" "0,1,2,3,4,5,6,7" group.long 0x382C++0x03 line.long 0x00 "MRGD_W3_12_1,Memory Region Descriptor" bitfld.long 0x00 31. "CR,Code Region Indicator" "0,1" bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x3830++0x03 line.long 0x00 "MRGD_W4_12_1,Memory Region Descriptor" bitfld.long 0x00 31. "VLD,Valid" "0: The MRGDn assignment is invalid,1: The MRGDn assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MRGDn can be written,1: Entire MRGDn can be written,2: Domain x can only update the DxACP field and..,3: MRGDn is locked (read-only) until the next.." newline bitfld.long 0x00 28. "LKAS2,Lock ACCSET2" "0: Writes to ACCSET2 affect lesser modes,1: ACCSET2 cannot be modified" hexmask.long.word 0x00 16.--27. 1. "ACCSET2,SET 2 of Programmable access flags" newline bitfld.long 0x00 12. "LKAS1,Lock ACCSET1" "0: Writes to ACCSET1 affect lesser modes,1: ACCSET1 cannot be modified" hexmask.long.word 0x00 0.--11. 1. "ACCSET1,SET 1 of Programmable access flags" group.long 0x4000++0x03 line.long 0x00 "MSAC_W0_0_0,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x4004++0x03 line.long 0x00 "MSAC_W1_0_0,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4008++0x03 line.long 0x00 "MSAC_W0_0_1,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x400C++0x03 line.long 0x00 "MSAC_W1_0_1,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4400++0x03 line.long 0x00 "MSAC_W0_1_0,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x4404++0x03 line.long 0x00 "MSAC_W1_1_0,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4800++0x03 line.long 0x00 "MSAC_W0_2_0,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x4804++0x03 line.long 0x00 "MSAC_W1_2_0,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4808++0x03 line.long 0x00 "MSAC_W0_2_1,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x480C++0x03 line.long 0x00 "MSAC_W1_2_1,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4810++0x03 line.long 0x00 "MSAC_W0_2_2,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x4814++0x03 line.long 0x00 "MSAC_W1_2_2,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4818++0x03 line.long 0x00 "MSAC_W0_2_3,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x481C++0x03 line.long 0x00 "MSAC_W1_2_3,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4820++0x03 line.long 0x00 "MSAC_W0_2_4,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x4824++0x03 line.long 0x00 "MSAC_W1_2_4,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4828++0x03 line.long 0x00 "MSAC_W0_2_5,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x482C++0x03 line.long 0x00 "MSAC_W1_2_5,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" group.long 0x4830++0x03 line.long 0x00 "MSAC_W0_2_6,Memory Slot Access Control" rbitfld.long 0x00 24.--27. "EALO,Excessive Access Lock Owner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21.--23. "D7ACP,Domain 7 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 18.--20. "D6ACP,Domain 6 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15.--17. "D5ACP,Domain 5 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. "D4ACP,Domain 4 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9.--11. "D3ACP,Domain 3 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6.--8. "D2ACP,Domain 2 access control policy" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--5. "D1ACP,Domain 1 access control policy" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "D0ACP,Domain 0 access control policy" "0,1,2,3,4,5,6,7" group.long 0x4834++0x03 line.long 0x00 "MSAC_W1_2_6,Memory Slot Access Control" bitfld.long 0x00 31. "VLD,Valid" "0: The MSACs assignment is invalid,1: The MSACs assignment is valid" bitfld.long 0x00 29.--30. "LK2,Lock" "0: Entire MSACs can be written,1: Entire MSACs can be written,2: Domain x can only update the DxACP field and..,3: MSACs is locked (read-only) until the next.." newline bitfld.long 0x00 24.--25. "EAL,Exclusive Access Lock" "0: Lock disabled,1: Lock disabled until next reset,2: Lock enabled lock state = available,3: Lock enabled lock state = not available" tree.end autoindent.off newline