; --------------------------------------------------------------------------------
; @Title: ARM925 on chip peripherals
; @Props:
; @Author: -
; @Changelog:
; @Manufacturer:
; @Doc:
; @Core:
; @Chip:
; @Copyright: (C) 1989-2017 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: pera925t.per 16305 2023-06-28 11:47:37Z pegold $

config 16. 8.
width 8.
ASSERT VERSION.BUILD.BASE()>=80109.

sif PER.isNOTIFICATION()
base AVM:0x00000000
wgroup AVM:0x00++0
textline " Peripheral File Notification - "
button "show missing files" "DIALOG.MESSAGE ""Please check your installation for the possibly missing files:""+CONV.CHAR(0xa)+PER.NOTIFICATION.MISSINGFILES()"
textline " ---------------------------------------------------------------"
textline " The peripheral file for this SoC cannot be displayed.          "
textline " Possible reasons are:                                          "
textline " - it is missing in the local installation or under development "
textline " - it is confidential                                           "
textline "                                                                "
textline " As fallback only the core registers are shown.                 "
textline " Please check    www.lauterbach.com/scripts.html                "
textline " or contact      support@lauterbach.com .                       "
textline "                                                                "
endif
width 8.
tree "ID Registers"
group c15:0x0000--0x0000
line.long 0x0 "MIDR,Identity Code"
hexmask.long.byte 0x0 24.--31. 0x1 " IMPL  ,Implementer"
hexmask.long.byte 0x0 20.--23. 0x1 "  SPEC ,Specification Revision"
hexmask.long.byte 0x0 16.--19. 0x1 "  ARCH ,Architecture Version"
hexmask.long.word 0x0 4.--15. 0x1 "  PARTNUM ,Part Number"
hexmask.long.byte 0x0 0.--3. 0x01 "  REV ,Layout Revision"
group c15:0x0100--0x0100
line.long 0x0 "CTR,Cache Type"
bitfld.long 0x0 25.--28. " CLASS ,Cache Class" "0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f"
bitfld.long 0x0 24. "   H    ,Cache Havardness" "no,yes"
textline "                 "
bitfld.long 0x0 18.--21. " DSIZE ,Data Cache Size" "512,1k,2k,4k,8k,16k,32k,64k,128k,256k,512k,1M,2M,4M,8M,?..."
bitfld.long 0x0 15.--17. "  DASS ,Data Cache Associativity" "dir,2,4,8,16,32,64,128"
bitfld.long 0x0 14. "  DM ,Data Cache Multiplier Bit" "0,1"
bitfld.long 0x0 12.--13. "  DLENGTH ,Data Cache Line Length" "2,4,8,16"
textline "                 "
bitfld.long 0x0 6.--9. " ISIZE ,Instruction Cache Size" "512,1k,2k,4k,8k,16k,32k,64k,128k,256k,512k,1M,2M,4M,8M,?..."
bitfld.long 0x0 3.--5. "  IASS ,Instruction Cache Associativity" "dir,2,4,8,16,32,64,128"
bitfld.long 0x0 2. "  IM ,Instruction Cache Multiplier Bit" "0,1"
bitfld.long 0x0 0.--1. "  ILENGTH ,Instruction Cache Line Length" "2,4,8,16"
tree.end
tree "MMU Control and Configuration"
width 8.
group c15:0x1--0x1
line.long 0x0 "CR,Control Register"
bitfld.long 0x0 13. " V  ,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
textline "                 "
bitfld.long 0x0 12. " I  ,Instruction Cache Enable" "Disable,Enable"
bitfld.long 0x0 0x9 "  R  ,ROM Protection" "Disable,Enable"
bitfld.long 0x0 0x8 "  S  ,System Protection" "Disable,Enable"
bitfld.long 0x0 0x7 "  B  ,Endianism" "Little,Big"
textline "                 "
bitfld.long 0x0 0x3 " W  ,Write Buffer" "Disable,Enable"
bitfld.long 0x0 0x2 "  C  ,Cache" "Disable,Enable"
bitfld.long 0x0 0x1 "  A  ,Alignment Fault" "Disable,Enable"
bitfld.long 0x0 0x0 "  M  ,MMU" "Disable,Enable"
textline " "
group c15:0x2--0x2
line.long 0x0 "TTBR,Translation Table Base Register"
hexmask.long 0x0 14.--31. 0x4000 " TTBA ,Translation Table Base Address"
textline " "
group c15:0x3--0x3
line.long 0x0 "DACR,Domain Access Control Register"
bitfld.long 0x0 30.--31. " D15  ,Domain Access 15" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 28.--29. "  D14 ,Domain Access 14" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 26.--27. "  D13 ,Domain Access 13" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 24.--25. "  D12 ,Domain Access 12" "Denied,Client,Reserved,Manager"
textline "                 "
bitfld.long 0x0 22.--23. " D11  ,Domain Access 11" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 20.--21. "  D10 ,Domain Access 10" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 18.--19. "  D9  ,Domain Access 9" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 16.--17. "  D8  ,Domain Access 8" "Denied,Client,Reserved,Manager"
textline "                 "
bitfld.long 0x0 14.--15. " D7   ,Domain Access 7" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 12.--13. "  D6  ,Domain Access 6" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 10.--11. "  D5  ,Domain Access 5" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 8.--9. "  D4  ,Domain Access 4" "Denied,Client,Reserved,Manager"
textline "                 "
bitfld.long 0x0 6.--7. " D3   ,Domain Access 3" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 4.--5. "  D2  ,Domain Access 2" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 2.--3. "  D1  ,Domain Access 1" "Denied,Client,Reserved,Manager"
bitfld.long 0x0 0.--1. "  D0  ,Domain Access 0" "Denied,Client,Reserved,Manager"
textline "                      "
group c15:0x5--0x5
line.long 0x0 "FSR,Fault Status Register"
bitfld.long 0x0 0x4--0x7 " DOMAIN  ,Domain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x0 0x0--0x3 "  STATUS ,Status" "reserved,alignment,reserved,alignment,be_linef_sect,transl_sect,be_linef_page,transl_page,be_other_sect,domain_sect,be_other_page,domain_page,be_trans_l1,perm_sect,be_trans_l2,perm_page"
group c15:0x6--0x6
line.long 0x0 "FAR,Fault Address Register"
textline " "
group c15:0x0d--0x0d
line.long 0x0 "PID,Process Identifier"
group c15:0x4f--0x4f
line.long 0x0 "TID,Thread ID"
tree.end
tree "Cache Control and Configuration"
group c15:0x1f--0x1f
line.long 0x0 "CONFIG,ARM 925T Configuration"
bitfld.long 0x0 0x7 " S ,Instruction Cache Streaming" "streaming,non-streaming"
bitfld.long 0x0 0x5 "  O ,OS configuration" "WinCE,ARM915T"
bitfld.long 0x0 0x2 "  C ,D-Cache clean and flush entry mode" "no,yes"
bitfld.long 0x0 0x1 "  T ,Transparent Mode" "no,yes"
bitfld.long 0x0 0x0 "  L ,Lock enable" "no,yes"
group c15:0x3f--0x3f
line.long 0x0 "I_MIN,D-Cache Min dirty index"
group c15:0x2f--0x2f
line.long 0x0 "I_MAX,D-Cache Max dirty index"
wgroup c15:0x8f--0x8f
line.long 0x0 "STATUS,ARM 925T Status"
in
tree.end
tree "ICEbreaker"
width 8.
group ice:0x0--0x5 "Debug Control"
line.long 0x0 "DBGCTRL,Debug Control Register"
bitfld.long 0x0 0x5 " ICE  ,EmbeddedICE Disable" "enabled,disabled"
bitfld.long 0x0 0x4 " MONITOR ,Monitor Mode Enable" "disabled,enabled"
textline "                 "
bitfld.long 0x0 0x3 " STEP ,Single Step" "disabled,enabled"
bitfld.long 0x0 0x2 " INTDIS  ,Interrupts Disable" "enabled,disabled"
bitfld.long 0x0 0x1 "  DBGRQ ,Debug Request" "no,yes"
bitfld.long 0x0 0x0 "  DBGACK ,Debug Acknowledge" "no,yes"
line.long 0x4 "DBGSTAT,Debug Status Register"
bitfld.long 0x4 0x6--0x9 " MOE  ,Method of Entry" "no,BP0,BP1,BPsoft,Vector,BPext,WP0,WP1,WPext,AsyncInt,AsyncExt,Reentry,res,res,res,res"
bitfld.long 0x4 0x5 " IJBIT ,IJBIT" "0,java"
bitfld.long 0x4 0x4 "  ITBIT ,ITBIT" "0,thumb"
bitfld.long 0x4 0x3 "  SYSCOMP ,SYSCOMP" "0,1"
bitfld.long 0x4 0x2 "  IFEN ,Interrupts Enable" "disabled,enabled"
bitfld.long 0x4 0x1 "  DBGRQ ,Debug Request" "no,yes"
bitfld.long 0x4 0x0 "  DBGACK ,Debug Acknowledge" "no,yes"
line.long 0x8 "VECTOR,Vector Catch Register"
bitfld.long 0x8 0x7 " FIQ  ,FIQ" "dis,ena"
bitfld.long 0x8 0x6 " IRQ ,IRQ" "dis,ena"
bitfld.long 0x8 0x4 "  D_ABO ,D_ABORT" "dis,ena"
bitfld.long 0x8 0x3 "  P_ABO ,P_ABORT" "dis,ena"
bitfld.long 0x8 0x2 "  SWI ,SWI" "dis,ena"
bitfld.long 0x8 0x1 "  UND ,UNDEF" "dis,ena"
bitfld.long 0x8 0x0 "  RES ,RESET" "dis,ena"
line.long 0x10 "COMCTRL,Debug Communication Control Register"
bitfld.long 0x10 28.--31. " VERSION ,Version Number" "0000,0001,0010,0011,0100,0101,0110,0111,1000,1001,1010,1011,1100,1101,1110,1111"
bitfld.long 0x10 0x1 "  WRITE ,Write Register Free" "idle,pend"
bitfld.long 0x10 0x0 "  READ ,Read Register Free" "idle,pend"
line.long 0x14 "COMDATA,Debug Communication Data Register"
group ice:0x8--0x0d "Watchpoint 0"
line.long 0x0 "AV,Address Value"
line.long 0x4 "AM,Address Mask"
line.long 0x8 "DV,Data Value"
line.long 0x0c "DM,Data Mask"
line.long 0x10 "CV,Control Value"
bitfld.long 0x10 0x8 " ENABLE ,Global Enable for Watchpoint 1" "DIS,ENA"
bitfld.long 0x10 0x7 "  RANGE ,Assert RANGEOUT Signal" "0  ,1"
bitfld.long 0x10 0x6 "  CHAIN ,Connect to Watchpoint 0" "0  ,1"
bitfld.long 0x10 0x5 "  EXTERN ,Depentend from EXTERN Signal" "0  ,1"
bitfld.long 0x10 0x4 "  nTRANS ,CPU Mode" "User,no User"
bitfld.long 0x10 0x3 "  nOPC ,Op Fetch" "Inst,Data"
bitfld.long 0x10 0x1--0x2 "  MAS ,Access Size" "Byte,Word,Long,Res"
bitfld.long 0x10 0x0 "  nRW ,Read/Write" "R  ,W"
line.long 0x14 "CM,Control Mask"
bitfld.long 0x14 0x7 "             RANGE ,Assert RANGEOUT Signal" "ENA,DIS"
bitfld.long 0x14 0x6 "  CHAIN ,Connect to Watchpoint 0" "ENA,DIS"
bitfld.long 0x14 0x5 "  EXTERN ,Depentend from EXTERN Signal" "ENA,DIS"
bitfld.long 0x14 0x4 "  nTRANS ,CPU Mode" "ENA,DIS    "
bitfld.long 0x14 0x3 "  nOPC ,Op Fetch" "ENA ,DIS"
bitfld.long 0x14 0x1--0x2 "  MAS ,Access Size" "ENA ,Res,Res,DIS"
bitfld.long 0x14 0x0 "  nRW ,Read/Write" "ENA,DIS"
group ice:0x10--0x15 "Watchpoint 1"
line.long 0x0 "AV,Address Value"
line.long 0x4 "AM,Address Mask"
line.long 0x8 "DV,Data Value"
line.long 0x0c "DM,Data Mask"
line.long 0x10 "CV,Control Value"
bitfld.long 0x10 0x8 " ENABLE ,Global Enable for Watchpoint 1" "DIS,ENA"
bitfld.long 0x10 0x7 "  RANGE ,Assert RANGEOUT Signal" "0  ,1"
bitfld.long 0x10 0x6 "  CHAIN ,Connect to Watchpoint 0" "0  ,1"
bitfld.long 0x10 0x5 "  EXTERN ,Depentend from EXTERN Signal" "0  ,1"
bitfld.long 0x10 0x4 "  nTRANS ,CPU Mode" "User,no User"
bitfld.long 0x10 0x3 "  nOPC ,Op Fetch" "Inst,Data"
bitfld.long 0x10 0x1--0x2 "  MAS ,Access Size" "Byte,Word,Long,Res"
bitfld.long 0x10 0x0 "  nRW ,Read/Write" "R  ,w"
line.long 0x14 "CM,Control Mask"
bitfld.long 0x14 0x7 "             RANGE ,Assert RANGEOUT Signal" "ENA,DIS"
bitfld.long 0x14 0x6 "  CHAIN ,Connect to Watchpoint 0" "ENA,DIS"
bitfld.long 0x14 0x5 "  EXTERN ,Depentend from EXTERN Signal" "ENA,DIS"
bitfld.long 0x14 0x4 "  nTRANS ,CPU Mode" "ENA,DIS    "
bitfld.long 0x14 0x3 "  nOPC ,Op Fetch" "ENA ,DIS"
bitfld.long 0x14 0x1--0x2 "  MAS ,Access Size" "ENA ,Res,Res,DIS"
bitfld.long 0x14 0x0 "  nRW ,Read/Write" "ENA,DIS"
tree.end
textline ""